700476EN_B_0512_MLT840

8/12/2019 700476EN_B_0512_MLT840

1/20

AGRICULTURAL HANDLING solutions

8/12/2019 700476EN_B_0512_MLT840

2/202

A PASSIONFORFARMING

As partners to the farmingindustry for more than 20years, we know your businessis demanding, and on todaysmodern farm the materialshandling plays an important partin the daily farm handling jobs,so you can be sure youll be ableto find within our farming rangeTHEManitou you need.

The MLT 840 rough terraintelehandler is the ideal choicefor performance. Its impressivecapabilities enable you to carryout all your farm handlingtasks:

animal feed, harvesting work, bulk loading and unloading.

Arable, dairy and livestock farmers, cereal growers,cooperatives and agricultural contractors will appreciatethe qualities of this machine. More than just a handlingsolution, Manitou offers you a product which both looksgood and is comfortable to use: inside and outside havebeen cleverly designed to satisfy you. The MLT 840benefits from innovations such as: JSM*, control console,ECS**In short you gain in both comfortand productivity.

When you choose Manitou, you can count on a fork lifttruck for long term durability. You also benefit from thepackage of services provided by your dealer: after-salesservice, servicing and maintenance contracts, on-siterepairs and financing solutions.

Why all this? Because, like you, we take pleasure in a

job well done!

* Joystick Switch and Move, patent applied for by Manitou BF**Easy Connect System: hydraulic decompression of the accessory line

8/12/2019 700476EN_B_0512_MLT840

3/203

A real agricultural

handling solution

8/12/2019 700476EN_B_0512_MLT840

4/204

PERFORMANCEON YOURFARM

4000 kg:The MLT 840s maximum capacityallows you to move up to 4 tonnesand - better still - to tip up to 3 tonnesinto a 4.5 m high trailer.

7.55 m:The boom of the MLT 840 lets youcarry loads up to 7.55 m in height with80 cm of offset.

3.98 m:A turning radius that makes nocompromise: performance meansagility!

8/12/2019 700476EN_B_0512_MLT840

5/205

You chooseThe MLT 840 is available in two different versions:

- MLT 840-115 PSequipped with a 115 HPengine and a 150 l/minvariable flow rate pump

- MLT 840-137 PSequipped with a 137 HPengine and a 180 l/minvariable flow rate pump.

Both versions have a five-speed Powershiftgearbox with the lock-up function.You can choose just the power you need. A150 l/min variable flow rate pump is mountedon the 115 HP model whereas the 137 HPversion is equipped with a 180 l/min variableflow rate pump.

Style and design

Because you appreciate machines that look good, the design of theMLT 840 has been carefully worked on. A carefully profiled engine hoodand a style marked by delicate lines and slender shapes youre hookedstraight away.

Goes anywhereAgricultural profile tyres, high ground clearance, an impressivetractive effort and a regulated cooling system : you will be able towork efficiently in any situation. The MLT 840 has been developed tohelp you manage your farm operations.

8/12/2019 700476EN_B_0512_MLT840

6/206

YOU FEEL GOOD...

A new standard in agricultural

telehandlers.

As we know you will be spendinga lot of your time in your vehicle,we wanted you to enjoy optimumcomfort and technology.

The interior of the MLT leavesnothing to be desired with itssuperb bodywork. The refineddashboard, the materials used, thesmart finish and the technologiesproposed all contribute to thetop-

of-the-range feel of the cab.

The new design of your driving position is a true modelof ergonomic prowess. The architecture has been carefullyplanned to provide a generous amount of space andequipment perfectly suited to your needs are available asstandard or on option: cloth seat, fully adjustable steeringcolumn (height/depth), sun visor, roof screen, electricwindow, air conditioning, automatic wheel alignment,all help to provide you with a comfortable workingenvironment.

Exclusive to Manitou, JSMlets you control all movementswith one hand safely and intuitively: raising and loweringthe boom, extending and retracting, crowding and tilting,control over the hydraulic line to the attachment, forward/reverse direction of travel or switching the M-Shiftgearboxto manual. You always keep one hand on thesteering wheel to maintain full control of your MLT.

The new dashboard features a digital information screendisplaying the next maintenance period, the gearengaged, travel speed, boom angle, fuel consumptionand lots of other information useful to your day-to-daywork.

8/12/2019 700476EN_B_0512_MLT840

7/207

...but you havetogo homein the end!

8/12/2019 700476EN_B_0512_MLT840

8/208

Adapting

to your requirements

8/12/2019 700476EN_B_0512_MLT840

9/209

EACH TO THEIR OWN STYLE

Reacting to customer choice is a Manitou principle. Thats the

reason you can choose between3 levels of finish: Classic,Premiumand Elite.

Because all your requirements are important, Manitou providesyou with complete peace of mind in all versions of the MLT.

In the Classic version, your comfort is increased by:

Mechanical cloth seat

Rear-view mirror

Radio player

Radiator auto cleaning system

You are not just opting for a Manitou, but for yourManitou...The Premiumfinish is differentiated by a number of practical and innovative items:

Pneumatic cloth seat

Rear-view mirror

CD/MP3 radio

Air conditioning

Attachment line decompression system: Easy Connect System


Manual accelerator

The Eliteversion offers a top specification model:

Low-frequency pneumatic cloth seat

Rear-view mirror

Bluetooth radio

Air conditioning

Boom suspension

Attachment line decompression system: Easy Connect System

Radiator auto cleaning systemSemi-automatic wheel realignment

Manual accelerator

Adjustable, continuous hydraulic attachment line

Xenon worklight

8/12/2019 700476EN_B_0512_MLT840

10/2010

Optimising

the power of your engine

COMBINE POWERANDPERFORMANCE

DESIGNED TO OPTIMISE POWER AND FUEL EFFICIENCYEach telehandler must have a suitable power unitto give you the best engine/machine torque: too little power and you lose efficiency, too much power couldincrease consumption to no effect.

To transform minimum fuel into maximum efficiency, your MLT 840 is fitted witha John Deere 4.5lfour-cylinder engine complying with Interim Tier 4/Stage IIIB

standards and developing 115 or 137 HP. These engines are equipped with anExhaust Gas Recirculation (EGR) valve combined with a Diesel Particulate Filter(DPF).

The cooling system has been designed to offer efficiency and economy.Featuring an electronic regulating device, the cooling system controls the

fan speed automatically according to engine temperature, leading to significant fuel savings. Equipped asstandard with an automatic air flow inverter, your telehandler can breathe perfectly in all situations toprovide excellent working conditions regardless of engine speed.

8/12/2019 700476EN_B_0512_MLT840

11/2011

1

2

3

1

2

3

115or 137HP:The 115 and 137 available horsepower offersmoderate fuel consumption on an everyday basisfor maximum performance.

Five-speed Powershift:Designed for performance and economy, the new M-Shiftautomatic gearbox fitted as standard on the MLT 840 also of fersyou flexibility and comfort .

M-SHIFTGEARBOX: SIMPLICITY AND EFFICIENCYThe new five-speed M-Shiftgearboxis designed for smooth gear changing in all situations. Two modes ofoperation are available: automatic and manual.

In automatic mode:

You shift from one gear to another with minimum torque interruption. The gearshift program adapts to thetorque and speed demanded by the job at hand, and determines the optimum gear automatically.This lets you engage a low gear, for example, when you are towing a trailer on hilly roads to recover torqueand speed.You choose the top gear in which you wish to travel: D, 4, 3or 2. In D, your MLT 840 will derive the fullbenefit of the five gears available to offer you optimum performance.

When making heaps of silage or picking up cereals, you may decide to go no higher than third gear. In thiscase, you select 3 and your MLT 840 will take care of the gear changes, quickly and smoothly, but will neverengage a gear higher than third.

In manual mode:You decide which gear you wish to engage using the +and buttons on the JSM.

Lock-up :The MLT 840 is fitted as standard with a torque converter lock-up function which drives the transmissionsystem directly over 23 km/h in fourth gearand 38 km/h in fifth. This system improves the efficiencyof your MLT 840, increases its tractive effort and reduces fuel consumption.

M-SHIFT

control cluster

Gear selector

Hydraulic line A control

Hydraulic line B control

8/12/2019 700476EN_B_0512_MLT840

12/2012

Work quickly

and effectively

8/12/2019 700476EN_B_0512_MLT840

13/2013

Save yourself time to concentrate on what matters - thatsManitous philosophy when it comes to handling: fast workingcycles and driver comfort are good examples.

For maximum efficiency, Manitou offers you a machinewhich is simple to use. Quick and easy to learn(JSM, controlsperfectly placed), your machine is the solution to all your farmhandling duties.

Manuvrability is essential!You will be able to do even morework: the more time you spend at the wheel of your Manitouthe more your efficiency will be increased.

With the LSU (Load Sensing Ultra) system using variable-displacement pumps up to 180 l/min, movements can becumulated for improved working efficiency. You can modulatethe hydraulic speed of your boom head attachment in both directions by means of two flowregulators. Once you have set up the system to suit, you can for example opena bale clampquicklyand close itslowly, without even thinking about it! Very practical when handling balesof haylage!

A wide range of attachmentsare available, ideally suited to your Manitou to increase utilisationand versatility. Whatever the job, Manitou can provide a solution to maximise your farmhandling requirements with complete safety. Collector brush, bale clamp, multifunction grabbucket, boom, silo unloader bucket. Manitou supports you in all your applications.

YOU WILL HAVETIME TO SPARE

Loading comparison data

Work cycle usinga tractor witha loader arm

Work cycle usingan MLT 840-115 PS

Work cycle usingan MLT 840-137 PS

150or180 l/min:The piston pump of your MLT 840, combined with theJSM, delivers a maximum flow rate of 150 or 180 l/minfor quick and accurate movements.

4x 4 x 4:4 wheel drive and 4 wheel steer =manoeuvrability for getting out of allsituations.

Sources: Manitou data

8/12/2019 700476EN_B_0512_MLT840

14/2014

SORRY, WE DONT DESIGN TOYSOur design department, employing more than 200 engineers and technicians, havespecialised in the design of agricultural telehandlers for more than 20 years. With morethan 50 registered patents, our knowledge and expertise with regard to the structure of themachine offers you reliability and durability. A fully comprehensive testing procedure and"best practice" methods are applied to ensure quality manufacturing at all levels, utilising allthe latest modern technology.

Specialists in agriculture, Manitou develop their product range with the customer in mind,selecting components to suit the most arduous farm handling needs, your machine like theManitou company is 100% dedicated to agriculture: the tyres, transmission and even

the cooling system have been logically chosen and assembled.

YOU ARESAFE

The assuranceof working

in total safety

8/12/2019 700476EN_B_0512_MLT840

15/2015

A machine 100%dedicated

to agriculturaluse

YOU AREPROTECTEDYour working environment must above all be a safe area.

The excellent stabilityof the MLT 840 combined with the aggravating movement arrestor allowsyou to handle maximum loads up to 4 tonneswith complete confidence.

Your safetyis further reinforced by the presence detectorlocated in the seat. Travel movementsare only allowed when you are sitting in the driving seat.

The cab has been especially designed to protectyou. Satisfying ROPS/FOPS*requirements,

withstanding rolling over, heavy objects falling and therefore prevents distortion to the cab.

A large window area, lateral engine, low boom pivot as well as the high seating position givesyou 360 visibilityguaranteeing both your own safety and that of everyone around you.

* ROPS: rollover protection structure FOPS: falling objects protection structure

8/12/2019 700476EN_B_0512_MLT840

16/2016

OFFERING YOU MADE-TO-MEASURE SERVICESThe close proximity of a network of experts at your service.Your local Manitou dealer is dedicated to providing a first class after sales back up. Theknow-how, experience and commitment of Manitou, at more than 500 dealers throughoutthe world, ensure you will have professional support on a daily basis.

Maintenance and after-sales service:so that your telehandler is operational all yearround, your dealer can offer you maintenance contracts. You will reduce your usagecosts and have the guarantee of your equipment being regularly monitored. Manitou iscommitted to maintaining your productivity on a daily basis.

Leasing and finance agreements: your Manitou dealer is your best partner. Forfinancial solutions, we help provide you with specific finance and modular packages tosupport you as your business develops.

COMFORT SERVICE: a maintenance contract comprising consumables, labourand travel for maximum peace of mind.

MANIPLUS: a contract which extends the manufacturers guarantee by 24 to36 months.

SEE FURTHER

8/12/2019 700476EN_B_0512_MLT840

17/2017

Accompanying

the changes in

your business

REDUCEYOUR ECOLOGICAL FOOTPRINTFrom the design stage of your machine, Manitou does everything to respect theenvironment.

Our Ancenis production site, certified ISO 14001*, guarantees that environmental standardsare included from the design stage of the product up to the delivery of the machine to yourbusiness. Daily routine procedures include the selection of the least polluting components,selective sorting, treatment of special wastes and quite simply daily vigilance (energy, papershavings).

The optimum management of the engine speed according to the power demanded minimisesyour consumptionand your polluting emissions, thus reducing the impact of the use of yourMLT on the environment.

* ISO 14001: international environmental management standard which lays down requirements relating to the implementation of an environment management system.

8/12/2019 700476EN_B_0512_MLT840

18/2018

HP self washerSilo unloader-distributor bucket

Multifunction grab bucket Grain bucket Collector brush

Standard Option - Not available

YOU CHOOSE

A selection of attachments available:

Standard and optional equipment

Fork carriage

Rear-view mirror + Internal view mirror


Radio player - -

CD/MP3 radio -

Bluetooth radio

Mechanical cloth seat - -

Pneumatic cloth seat -

Low-frequency pneumatic cloth seat

Air conditioning

Attachment line decompression system: ECS

Manual accelerator

Boom suspension

Xenon worklight

Semi-automatic wheel realignment

Adjustable, continuous hydraulic attachment line

Hydraulic locking (accessories)

Boom-mounted light

8/12/2019 700476EN_B_0512_MLT840

19/2019

FT005FR_A_1210_MLT735.indd

0.5m

40

30

20

10

0

-3

7.55

50 60

65

-1

1

0m

2

3

4

5

6

7

8

0m12345

1.802.453.50

2.102.904.45 1.50

1450KG

1700KG

2000KG

2500KG

3000KG

3500KG

4000KG

D C B A

D

A

B

C

FT011EN_A_1011_MLT840.indd

mm

A 1200

B 2880

C 1465

C1 1362

D 5367

D1 5264

Maximum height reach:0.75 m

As per standard EN 1459 annex B

D2 4487

E 6567

F 1925

F1 1925

G 447

G1 415

G2 444

I 1022

J 995

K 1245

L 50

N 1762

O 125

P2 37.5

P3 33

R 3746

S 8085

T 3892.5

U1 2419

U2 2559

V 5040

V1 1147.5

V2 3980

W 2392

Y 12

Z 136

MLT 840-115 PS MLT 840-137 PS

Lifting capacityat 500 mm from fork heels

4000 kg

Break-out force 5222 daN

Lifting height 7.55 m

Time: laden/unladen (in sec)

Lifting 6.80/8.70 6.60/8.40

Lowering 5.00/5.20 4.80/4.90

Extension 6.50/6.50 6.30/6.30

Retraction 5.40/5.40 5.20/5.20

Crowd 3.20 3.00

Dump 2.50 2.40

Tyres 460/70 R24

Forks (mm)

Length x width x thickness 1200 x 125 x 50

Carriage rotation 148

Brakingmultiple-disk brake with oil bath

on front and rear axles

JOHN DEERE STAGE III B engine 4045 PWX

Cubic capacity 4 cyl./4500 cm3

Power at 2000 rpm (ISO/TR 14396) 115 HP/86 kW 137 HP/102 kW

Max. torque at 1500 rpm (ISO/TR 14396) 480 Nm 515 Nm

Injection direct

Cooling water

Transmission torque converter

Gearbox Powershift M-Shiftwith Lock-up

Number of gears (forward/reverse) 5/3

Max. travel speed 40 kph*

Hydraulics 150 l/min - 290 bar 180 l/min - 290 bar

Piston pump electronically controlled variable cubic capacity

Control valve DDIC

Capacities

Hydraulic oil 175 l

Fuel 143 l

Unladen weight(with forks) 8401 kg

Widthoverall 2.39 m

Heightoverall 2.40 m

Lengthoverall 5.37 m

Turning radius(outer wheels) 3.98 m

Ground clearance 0.41 m

Drawbar pull 9100 daN 9400 daN

Noise at driving position (LpA) 80 dB

Environmental noise (LwA) 105 dB

Vibration to whole hand/arm < 2.5 m/s2

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitoureserves the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document.Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photosand diagrams contained in this broc hure are provided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

*May vary according to applicable regulations

8/12/2019 700476EN_B_0512_MLT840

20/20

Head ofce:

B.P. 249 - 430 rue de lAubinire - 44158 Ancenis Cedex - FranceTel: 00 33 (0)2 40 09 10 11 - Fax: 00 33 (0)2 40 09 10 97

www.manitou.com

Your nearest MANITOUdealer:

Documents

700476EN_B_0512_MLT840