Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
7.1.7
LIFE ASSISTCLOSE COUPLED SPECIAL NEEDS TOILET SUITES or P TRAP
Life Assist Seat
LIC.WMKA21238
SUPERSEDES ALL PREVIOUS ISSUES
The morestars the morewater efficient
Bathroom Products Australia Pty Ltd
Licence No. 0137
In accordance with AS/NZS 6400
3.5 Litresaverage flush
4.5L per full flush / 3.2L per half flush
www.waterrating.gov.auWATER RATING
J2700.2750SN
March 2019
LIFE ASSISTCLOSE COUPLED SPECIAL NEEDS TOILET SUITE
· Special Needs seat(blue or grey) with lateral stabilisers supplied asstandard
· Raised flush buttons(blue) for ease of operation
· AS1428.1 compliant
· Smartly styled flush to wall close coupled vitreous china toilet suitedesigned for special needs applications
· Adjustable S connector supplied for 90-300mm set out or 300-370 withoptional X011B connector
· Long projection WC pan for wheelchair side access
· Adjustable for concealed back entry or optional left/right hand bottomentry
Provided
Item Description Code
Toilet Life Assist Flush to Wall Close Coupled Pan J2700SN
Cistern Life Assist Cistern with Raised Buttons J2750SN
Seat Life Assist Toilet Seat - Blue
OR
RB6044B
Seat Life Assist Toilet Seat - Grey RB6044G
Seat Life Assist Toilet Seat - White RB6044W
Sewer S Connector 90-300mm set out X011H
Installation Floor Fixing Kit XJ200
Installation Instruction Sheet
Optional
Inlet Valve Bottom Entry Inlet Valve conversion Kit XJ108
690
315
180
470
255
110
50
440
145
355
Special Note
For compliance with AS1428.1 the seat is available in a grey or blue colour to provide contrast for vision impaired individuals.The seat also has lateral stabilisers fitted for people with ambulatory limitations and there is no seat lid.
Note that the design of the installation must comply with AS1428.1(2009)-Design for access and mobility
800
375
90-300
175
745*
HEIGHT FORBACK-ENTRYWATER INLET
Standard Fittings
Inlet Valve XJ102
Outlet Valve XJ114
Stopper Plug XJ160
Cistern/Pan Seal XJ161
Silicone Pan Caps XJ188
½“ Hose 300mm XJ191
Cistern Bolts XJ193
P TRAP HEIGHT 180mm
SUPPLIED WITH X011H ADJUSTABLE CONNECTOR FOR S TRAP INSTALLATIONSWHEN X011H IS USED ,SET OUTS OVER 200mm MAY REQUIRE THE INSTALLER TO ADD A BLOCK EXTENSION TO THE WALL ENABLE THE CONNECTOR PROP TO REACH BACK TO THE WALL
200*
240*240*
* RECOMMENDED WATER INLET LOCATIONS
OPTIONAL INLET VALVE (XI210) REQUIRED FOR BOTTOM WATER ENTRY INSTALLATIONS
All dimensions are in millimetres and are subject to normal manufacturing variation of +/- 3mm on all surfaces. As product development is ongoing BPA reserves the right to vary specifications without notice.Bathroom Products Australia P/L ABN 87 079 297 617
R1.2
805
60
30
450-460
Backrest supplied separately
R1.3
All dimensions are in millimetres and are subject to normal manufacturing variation of +/- 3mm on all surfaces. As product development is ongoing BPA reserves the right to vary specifications without notice.
Fax: 1300 746 480Tel: 1300 717 717
www.johnsonsuisse.com.au
Bathroom Products Australia P/L ABN 87 079 297 617