463Melrie

MELRIE65

LED VERSION: Class A/A+/A++Luminaire supplied with integrated LED modules that cannot be replaced

A++

A+

AFLUORESCENT VERSION: Class ATC-DEL/G24q-1

A FLUORESCENT VERSION: Class ATC-DEL/G24q-3

AHALOGEN VERSION: Class DQT26/E14

D

EU Regulation 874/2012 - Illumination equipment energy classes

LED VERSION:Class A/A+/A++Luminaire supplied with integrated LED modules that cannot be replaced

.1 White .6 Grey .3 Anthracite .18 Deep Brown.4 Black

• Luminaire for installation on wall – surface mounted.• Configuration: polycarbonate structure and die-cast

aluminium cover and base (MaxiMelrie only), EN AB-47100 alloy (low copper content)

• Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders that are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components that have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.

• Protection rating: IP65• In compliance with EN 60598-1 standards• Class of insulation: Melrie: II; MaxiMelrie: I• Installation: Melrie: wiring through two rubber cable

holders (5mm<Ø<10mm cables); MaxiMelrie: wiring through two rubber cable holders (8mm<Ø<13mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable holder.

• During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion.Chemical substances affect the anticorrosion covering protection.

The fitting is equipped with 2 cable input

Protection againstimpact.IK 09 - 10,00 joule

Wall fitting

FLUORESCENT VERSION:Class A TC-DEL/G24q-1TC-DEL/G24q-3

HALOGEN VERSION:Class D QT26/E14

464 Melrie

110

110

200

110

110

200

C0 / C180 C90 / C270

cd / 1000 lm

60˚

30˚

90˚

60

88 23 12 11 0

= 44.0˚+ 29.0˚ = 64.0˚+ 64.0˚

Max Medm1.00

2.003.004.005.00

30

lux lux

C0 / C180 C90 / C270

cd / 1000 lm

1514 46 24 12 1

= 55.0˚+ 26.0˚ = 60.0˚+ 60.0˚

Max Medm1.00

2.003.004.005.00

56

lux lux

60˚

30˚

90˚

60

C0 / C180 C90 / C270

cd / 1000 lm

185 5446 1321 612 37 2

= 43.0˚+ 43.0˚ = 63.0˚+ 63.0˚

Maxlux

Medlux

m1.00

2.003.004.005.00

360

30˚

60˚

90˚

485721 TC-DEL 13W G24q-1

65

65

@4000K

483005White 2700K lm LED 714 ≠ lm OUTPUT 452

483002White 3000K lm LED 768 ≠ lm OUTPUT 486

483001White 4000K lm LED 806 ≠ lm OUTPUT 510

Melrie - Unidirectional

Melrie - Unidirectional

Electronic ballast

Light Source: Mid-Power LED / 5,5W / Total power 8W / CRI>80 / 220÷240V / Integral electronic power supply

481121 QT 26 40W E14Lamp max size: Ø40 mm H.95 mm

465Melrie

110

110

200

C0 / C180 C90 / C270

cd / 1000 lm

185 5446 1321 612 37 2

= 43.0˚+ 43.0˚ = 63.0˚+ 63.0˚

Maxlux

Medlux

m1.00

2.003.004.005.00

200

60˚

90˚

120˚

110

110

200

C0 / C180 C90 / C270

cd / 1000 lm

88 23 12 11 0

= 44.0˚+ 29.0˚ = 64.0˚+ 64.0˚

Max Medm1.00

2.003.004.005.00

30

lux lux

90˚

60˚

120˚ 60

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚ 60

1517 46 24 12 1

= 55.0˚+ 26.0˚ = 60.0˚+ 60.0˚

Max Medm1.00

2.003.004.005.00

56

lux lux485722 TC-DEL 13W G24q-1

65

65

@4000K

483006White 2700K lm LED 2x714 ≠ lm OUTPUT 2x452

483004White 3000K lm LED 2x768 ≠ lm OUTPUT 2x486

483003White 4000K lm LED 2x806 ≠ lm OUTPUT 2x510

Melrie - Bidirectional

Melrie - Bidirectional

Electronic ballast

Light Source: Mid-Power LED / 11W / Total power 14W / CRI>80 / 220÷240V / Integral electronic power supply

481122 QT 26 40W E14Lamp max size: Ø40 mm H.95 mm

466 Melrie

120

140

280

C0 / C180 C90 / C270

cd / 1000 lm

296 8674 2133 1018 512 3

= 43.0˚+ 43.0˚ = 63.0˚+ 63.0˚

Maxlux

Medlux

m1.00

2.003.004.005.00

360

30˚

60˚

90˚

C0 / C180 C90 / C270

cd / 1000 lm

60˚

30˚

90˚

45

3822 910 46 24 2

= 34.0˚+ 34.0˚ = 58.0˚+ 58.0˚

Max Medm1.00

2.003.004.005.00

89

lux lux486121 TC-DEL 26W G24q-3

120

140

280 65

65

4827524White 2700K lm LED 1144 ≠ lm OUTPUT 724

4827521White 3000K lm LED 1230 ≠ lm OUTPUT 778

4827421White 4000K lm LED 1291 ≠ lm OUTPUT 817

@4000K

MaxiMelrie - Unidirectional

MaxiMelrie - Unidirectional

Light Source: Mid-Power LED / 8,8W / Total power 12W / CRI>80 / 220÷240V / Integral electronic power supply

Electronic ballast

Dimmable on request

120

140

280

C0 / C180 C90 / C270

cd / 1000 lm

296 8674 2133 1018 512 3

= 43.0˚+ 43.0˚ = 63.0˚+ 63.0˚

Maxlux

Medlux

m1.00

2.003.004.005.00

200

60˚

90˚

120˚

467Melrie

120

140

280

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚45

3822 910 46 24 2

= 34.0˚+ 34.0˚ = 58.0˚+ 58.0˚

Max Medm1.00

2.003.004.005.00

89

lux lux486122 TC-DEL 26W G24q-3

65

65

4827525White 2700K lm LED 2x1144 ≠ lm OUTPUT 2x724

4827522White 3000K lm LED 2x1230 ≠ lm OUTPUT 2x778

4827422White 4000K lm LED 2x1291 ≠ lm OUTPUT 2x817

@4000K

MaxiMelrie - Bidirectional

MaxiMelrie - Bidirectional

Light Source: Mid-Power LED / 17,6W / Total power 18W / CRI>80 / 220÷240V / Integral electronic power supply

Electronic ballast

Dimmable on request

468 Melrie

469Melrie

65

5030

acc. code

prod. code 237

481121

481122

483001 •483002 •483003 •483004 •483005 •483006 •485721

485722

486121

486122

4827421 •4827422 •4827521 •4827522 •4827524 •4827525 •

Accessories: Melrie

237SPD: (SURGE PROTECTION DEVICE) 275Vac MAXIMUM DISCHARGE CURRENT 10KA (8/20μs) MAXIMUM OPERATING CURRENT 5ASUITABLE FOR SERIES CONNEC-TION - IP66