636 - SPS Roof and Floor Draining Systems · 636 6shfldolw\ 3oxpelqj 6xssolhv 3w\ /wg $ & 1 $gguhvvhv 3rvwdo 32 %r[ .loodud 16: 6wruh 8qlw / /rzhu *leehv 6wuhhw &kdwvzrrg 16:

$Page 1: 636 - SPS Roof and Floor Draining Systems · 636 6shfldolw\ 3oxpelqj 6xssolhv 3w\ /wg $ & 1 $gguhvvhv 3rvwdo 32 %r[ .loodud 16: 6wruh 8qlw / /rzhu *leehv 6wuhhw &kdwvzrrg 16:$
SPS Speciality Plumbing Supplies Pty LtdA.C.N. 001 543 406

Addresses: Postal: PO Box 159 - Killara - NSW - 2071 Store: Unit 9L - 175 Lower Gibbes Street - Chatswood NSW 2067

Telephone (02) 9417 1900 Fax (02) 9417 0108 e-mail: [email protected]

PRODUCT CATALOG – REVISION 5

All SPS drains have been designed in Australia for Australian conditions and for Australian construction methods.

CONTENTS:

Section 1: Rainwater Outlets (“RWOs”)

Section 2: Domestic, Push-in and Retro-fit Drains

Section 3: Vari-level Drains - Vertical Outlets

Section 4: Vari-level Drains - Balcony & Side Outlets

Section 5: Vinyl Floor Wastes

Section 6: Basket Trap Floor Wastes

Section 7: Cleanouts - Inspection Points - Boundary Traps

Section 8: Security Drains

Section 9: Specials / Miscellaneous

Appendix: Flow Rate Information

Disclaimer:

All information contained in this catalogue is current as at 1 July 2017. SPS reserves the right to change product specifications - designs - components or associated services at any time without notice. The information contained in this catalogue does not form part of the terms of any contract of sale or constitute the description of any product or service supplied by SPS. Prior to purchasing or specifying - please contact SPS for any updates or modifications to current products or services. These drawings are for illustrative purposes only and are not to scale.

SECTION 1 Rainwater Outlets (RWO’s)

1.01

1.02

1.03

1.04

1.05

1.06

1.07

1.08

1.09

1.10

1.11

1.12

1.13

Truflo vertical – All-purpose RWO

Truflo vertical – Class D Flat Grate

Truflo vertical – Flat Grate & Membrane Clamp

Truflo vertical – Dome Grate & Membrane Clamp

Truflo vertical – Planter Box Assembly

Truflo 90° – Class D Flat Grate

Truflo 90° – Flat Grate & Membrane Clamp

Truflo 90°– Dome Grate & Membrane Clamp

Truflo 90° – Planter Box Assembly

Superflo – Class D Flat Grate

Superflo – Flat or Dome Grate & Membrane Clamp

“Shallow-flo” Push-in RWOs (USE WITH CAUTION)

Parapet Drain

To suit pipe (mm):

80, 100 & 150

80, 100 & 150

80, 100 & 150

80, 100 & 150

80, 100 & 150

80 & 100

80 & 100

80 & 100

80 & 100

150

150

100

50, 80 & 100

100Ø Socket

BA

N.B.

C

Speciality Plumbing Supplies Pty LtdTel: (02) 9417 1900 Fax: (02) 9417 0108 E-mail: [email protected]

If a 100mm or 150mm Truflo RWO body is cast into the slab, it can be adapted forthe following 5 applications:

The SPS All-Purpose "Truflo" RWO Body

D

1.

2.

260

260

A

150100

N.B

240

240

B110

160

C

Integral puddleflange withweep holes 4 xplaces

3.

4.

5.

100mm

100mm BSP -Lowered position

With Class D flat grate,for non-waterproofedslabs (eg car parkdecks).

With flat grate andmembrane ring, formembraned slabs(eg roof decks &some plant rooms).

90

98D

2828E F

3745

25

25G

G

F

E

1.01

With 100mm or150mm reversibleclamping collar, forvari-level floor drains.

With dome grate andmembrane ring, forroof slabs (note:optional gravel guardpartially illustrated).

With special PVC"planter box" fitting,for planter boxes.

150mm BSP -Raised position

Dimensions (mm)

Dimensions (mm)

SPS Truflo 100mm & 150mm RWOwith Class D Heavy-Duty Flat Grate

Load-tested to Class D of AS3996-2006

A

C

N.B.

B

Speciality Plumbing Supplies Pty Ltd*For flow rate data please refer to appendix.

Tel: (02) 9417 1900 Fax: (02) 9417 0108 E-mail: [email protected]

Specification codes:TIA100F (100mm CI body, galvanised flat grate)TIA150F (150mm CI body, galvanised flat grate)TBS100F (100mm bronze body, 316SS flat grate)TBS150F (150mm bronze body, 316SS flat grate)- for 80mm outlet, use "100/80" instead of "100"


D

Optional tailpiececonnector (suffix "E")

Structural slab

Flat grate in heavy duty,hot-dipped galvanisedmid-carbon steel or 316stainless steel

Optional couplingconnector (suffix "P")

F

G

E

1.02

Suggested applications:Car park decksPlant rooms

S P S

Optional high-heelfriendly pattern (6mmgaps) use suffix -F

25

25

G

4537

28

28

103151

106

86

260

260

100150

240

240

N.B DA CB E F10680 260 82240 28 45 25

Suggested application:Membraned floors orroofs with no further topping,eg planter boxes, plantrooms, roof decks.

S P S

Membrane ring fastens to bodyindependently of grate to allow accessto sump without breaking membraneseal.

Specification codes:TIA100F2 (CI body, aluminium flat grate & membrane ring)TIB100F2 (CI body, bronze flat grate & membrane ring)TBA100F2 (all-bronze assembly)- for 80mm outlet, use "100/80" instead of "100"- for 150mm outlet, use "150" instead of "100"

SPS Truflo 80, 100 & 150mm RWOwith Flat Grate & Membrane Clamp

E

Membrane

25

25

G

C

N.B.

Structural slab

D

E-series PVC in-pipeadapter (suffix "E")

4537

28

28

103151

106

86

260

260

100150

240

240

N.B DA CB E F

Tel: (02) 9417 1900 Fax: (02) 9417 0108 E-mail: [email protected] Plumbing Supplies Pty Ltd

A

G


F

B


1.03

Load Class A - AS 3996-2006

10680 260 82240 28 45 25

*For flow rate data please refer to appendix.

Dimensions (mm)

Dimensions (mm)


100mm

A



F

G


D

Structural slabN.B.

C

1.04


Membrane

E

SPS Truflo 100mm & 150mm RWOwith Dome Grate & Membrane Clamp

B

Optional 100mmhigh 304 SSgravel guard forbuilt-up roofs -code - GG105(100mm high)or GG105H(150mm high)


Specification codes:TIA100D2 (CI body, aluminium dome grate & membrane ring)TIB100D2 (CI body, bronze dome grate & membrane ring)TBA100D2 (all-bronze assembly)- for 80mm outlet, use "100/80" instead of "100"- for 150mm outlet, use "150" instead of "100"

Suggested application:Roof decks

25

25

G

4537

28

28

103151

106

86

260

260

100150

240

240

N.B DA CB E F10680 260 82240 28 45 25

Specification code:TIA100PB (100mm CI body with planter box adapter)TIA150PB (150mm CI body with planter box adapter)

SPS Truflo 100mm & 150mm RWOwith All-purpose Planter Box Adapter



Membrane


260 150

N.B

100

A

260 151 240

B

240

C 103

28 86

D106

E 28

2537

F45

G25

100Ø Socket

C

N.B.

A

B

D


Structural slabG

F

E

1.05

Adapter made fromheavy-duty ABS plasticand features an integral100mm socket suitable forslotted PVC riser.

Inspection cap (by others)

100mm Slotted PVC (by others)

Drainage cell etc (by others)

Dimensions (mm)

SPS Truflo 80mm & 100mm 90° RWOwith Class D Heavy-Duty Flat Grate

Structural Slab


D

Flat grate in heavy duty,hot-dipped galvanisedmid-carbon steel

S P S

Specification code:TIA80/90F (80mm CI body, galvanised steel flat grate)TIA100/90F (100mm CI body, galvanised steel flat grate)

A


Outside edge of PVC pipe

E


N.B.

100

80 260

260

A

240

240

B

28

28

140

11562

83

C D E

B

1.06

C N.B.

Suggested applications:Car park decksPlant rooms

Load-tested to Class D of AS3996-2006

D

A

B

C N.B.

E


Membrane ring fastens to bodyindependently of grate to allowaccess to sump without breakingmembrane seal.



80

100

N.B.

260

260

A

240

240

B

62

83

C115

140

D

28

28

E

Structural Slab

1.07

Membrane

Suggested application:Membraned floors orroofs with no further topping,eg planter boxes, plantrooms, roof decks.

SPS Truflo 80mm & 100mm 90° RWOwith Flat Grate & Membrane Clamp

S P S

Specification codes:TIA80/90F2 (80mm CI body, aluminium clamp ring & grate)TIB80/90F2 (80mm CI body, bronze ring & grate)TIA100/90F2 (100mm CI body, aluminium clamp ring & grate)TIB100/90F2 (100mm CI body, bronze ring & grate)


D


Optional 100mmhigh 304 SSgravel guard forbuilt-up roofs -code - GG105(100mm high)or GG105H(150mm high) A

Outside edge of 100mm PVC

E

EDCBAN.B.

100

80

260

260

240

240

83

62

140

115

28

28

Structural Slab

1.08

CN.B.

Membrane


Suggested applications:Roof decks with pipe cast in

SPS Truflo 80mm & 100mm 90° RWOwith Dome Grate & Membrane Ring

Specification codes:TIA80/90D2 (80mm CI body, aluminium clamp ring & dome)TIB80/90D2 (80mm CI body, bronze ring & dome)TIA100/90D2 (100mm CI body, aluminium clamp ring & dome)TIB100/90D2 (100mm CI body, bronze ring & dome)

B


*For flow rate data please refer to the appendix.

Specification code:TIA80/90PB (80mm CI body with planter box adapter)TIA100/90PB (100mm CI body with planter box adapter)


D

SPS Truflo 80mm & 100mm 90° RWOwith All-purpose Planter Box Adapter

Adapter made from heavy-dutyABS plastic and features anintegral 100mm socket suitable forslotted PVC riser.


E

2811562

83

C24026080

100 260 140240 28

A

B

N.B. A

Structural Slab

B D E

100Ø Socket

1.09

C N.B.

Membrane

Inspection cap (by others)


Drainage cell etc (by others)

Slotted PVC riser (by others)

Flat grate in heavy duty,hot-dipped galvanisedmid-carbon steel

SPS 150mm Superflo RWO withClass D Heavy Duty Flat Grate

Specification codes:SIA150F (150mm Superflo CI body, galvanised flat grate)


E



G

F


N.B.150 400

A B356 151

C150D E

66G38

F39

B

N.B.

C

A

Structural slab

D


1.10

Suggested applications:Car park decks, especially roof top car parks

Load-tested to class D of AS3996-2006

Specification codes:SIA150F2 (150mm Superflo CI body, galvanised cast ironflat grate & aluminium membrane clamp ring)SIA150D2 (150mm Superflo - CI body, aluminium domegrate & membrane clamp ring)

SPS 150mm Superflo Flat or Dome RWO(with Membrane Clamp Ring)


D

N.B.150

Speciality Plumbing Supplies Pty Ltd

AB

Membrane

E

G


F



C

400A

356B C

151F

39E66

D150 38

G

N.B.Optional tailpiece

connector (suffix "E")

Structural slab

1.11

Suggested applications:Large concrete roofs withheavy membraneSprinkler/hydrant test areas

DOME GRATEVERSION "D2"

FLAT GRATEVERSION "F2"

SPS "Shallowflo" 100mm Push-in RWO(Variation Based on Truflo System)

Body O.D. 260mm

N.B. 100mm

Grate O.D. 240mm


Specification codes:SF100F (CI body, galvanised flat grate class D)SF100F2 (CI body, LM-6 flat grate & membrane ring)SF100D2 (CI body, LM-6 dome grate & membrane ring)

60mm

Structural slab

Hot-dipped galvanised mid-carbonsteel flat grate, loadclass D per AS 3996-2006FLOW RATE max 3 l/s

1.12

Suggested applications:Applications where regularTruflo is too deep to fit, butnot requiring normal"Truflo" flow rates

S P S

40mm

O.D. 97mm

I.D. 86mm

Min depth:32mm

USE WITH CAUTION: Flow rates are only a fraction of those of regular Truflo

O-rings to suit100mm PVC,HDPE & Copper

100mm

LM-6 flat grate andmembrane ring, forwaterproofed slabs (egroof decks & plant rooms).FLOW RATE MAX 3 l/s

LM-6 dome grate andmembrane ring, for roofslabs (note: optionalgravel guard partiallyillustrated)FLOW RATE MAX 3 l/s

Specification Codes:PD50CS (50mm CI body, 316 SS grate)PD80CA (80mm CI body, aluminium grate)PD80CS (80mm CI body, 316 SS grate)PD100CA (100mm CI body, aluminium grate)PD100CS (100mm CI body, 316 SS grate)

A

Front View Side View

Flashing/Membrane

Topping / Tiling


82

55

105

N.B.

8050

100 280

210

150A D

35

25

45

C

11765

153

B

45

35

25E

37

35

F20

Push-inoutlet nowstandard

Parapet Wall

Structural Slab

Flashing/Membrane

TypicalApplication

97

72

50G

1.13

Body made from hot-dipped galvanised cast iron

O-rings available for push-in connection to PVC, copperand 100mm HDPE

Grates available in aluminium and 316 stainless steel

Optional bronze and nickel-bronze grates available byspecial order only

D

SPS Parapet or Scupper Drains

B

C

F E

G


SECTION 2 Domestic, Push-in & Retro-fit Drains

2.01

2.02

2.03

2.04

2.05

2.06

2.07

2.08

2.09

2.10

2.11

2.12

2.13

2.14

2.15

2.16

2.17

2.18

2.19

2.20

2.21

2.22

2.23

2.24

2.25

2.26

2.27

Push-in & Retro Fit Drains

100mm Domestic Floor Waste (fine pattern)

100mm Round - Push-in

100mm Square - Push-in


130mm Round (Grid Pattern) - Push-in


130mm Square (Grid Pattern) - Push-in

130mm Square - 100mm (round insert version) - Push-in



150mm Square Hybrid - Push-in - Unifin




200mm Square - Push-in (150 outlet)


225mm Round - Push-in (150 outlet)

110mm Square Floor Waste w/- Lo-profile Puddle Flange

130mm Round Floor Waste w/- Lo-profile Puddle Flange

130mm Square Floor Waste w/- Lo-profile Puddle Flange

150mm Square (Hybrid) w/- Lo-Profile Puddle Flange

150mm Round - Retro-fit Lower Body

150mm Square - Retro-fit Lower Body

150mm Square (Grid Pattern) - Retro-fit Lower Body

200mm Square - Retro-fit Lower Body

200mm Square (Grid Pattern) Retro-fit Lower Body

225mm Round - 100mm Retro-fit Lower Body

To suite pipe (mm):

100

50 & 80

50 & 80

80, 90 & 100

100

80, 90 & 100

80 & 100

100

100

100

100

100

100

100

150

100

150

100

100

100

100

100

100

100

100

100

100

Specification codes:DG100SF (round frame)DG100SF2 (square frame)

SPS 100mm Domestic Floor Waste

110mm110mm

15mm


100mm N.B.

17mm

2.01

Made from cast 304-grade polishedstainless steel. Satin 316 gradenon-stock option.

Features traditional bayonet-type gratefitting and 5x5mm heel-friendly pattern.

Slip-in to 100mm PVC pipe or leak controlflange insert (by others) eg WonderCap

"DG100SF" "DG100SF2"

SPS

Side View

(New Heel-Friendly Pattern)

SPS

Specification codes:R100SR (50mm, satin 316SS)R100SR4 (50mm, polished 304SS)R100/80SR (80mm, satin 316SS)R100/80SR4 (80mm, polished 304SS)

SPS 100mm Round Push-in Floor Drain

With topping/tiling

Topping / Tiling


50mm80mm

N.B

2518

A

5046

B

C

N.B.

Structural slab

Min. Height"A" mm

Cast into slab

Structural slab

2.02

Round grate available in316 stainless steel. 304grade available by specialorder.

O-ring spigot pushes into50mm or 80mm PVC pipeonly.

50mm outlet80mm outlet

Typical Applications

100mmRound

SPS

D

B

6442

C D

5072

SPS 100mm Square Push-in Floor Drain

Speciality Plumbing Supplies Pty LtdTel: (02) 9417 1900 Fax: (02) 9417 0108 E-mail: [email protected] 2.03

100mmSquare

SPS

Square grate available in316 stainless steel. 304grade available by specialorder.

O-ring spigot pushes into50mm or 80mm PVC pipeonly.

Specification codes:Q100SR (50mm, satin 316SS)Q100SR4 (50mm, polished 304SS)Q100/80SR (80mm, satin 316SS)Q100/80SR4 (80mm, polished 304SS)


D


C

N.B.

N.B

50mm80mm

A

2518 50

46

B

With topping/tiling

Structural slab

Topping / Tiling

Min. Height"A" mm

B

C

6442

7250

D

Cast into slab

Structural slab





Specification codes:R130/80SR4 (80mm - polished 304SS)R130/80SR (80mm - satin 316SS)R130/85SR (90mm - satin 316SS)R130SR4 (100mm - polished 304SS)R130SR (100mm - satin 316SS)

Structural Slab

With topping/tiling

Min. height"A"

Tiling or topping

2.04

N.B.


Structural Slab

Cast into slab

I.D. rubber rings tosuit various pipe

types (see below)

Round grate available in 304 or316 Stainless Steel.

O-ring spigot pushes into pipe.See below for specific size &material compatibility.

130mmRound


100mm outlet

80mm90mm

N.B. A B C D

CB

20

100mm

D

Pipe compatibility

PVC and copper20 PVC stormwater only

PVC, HDPE and copper17 41

49

49

90.5

726475 85.5

97


AutoCAD SHX Text

SPS

Specification code:R130SRQ4 (polished 304 stainless steel)R130SRQ (satin 316 stainless steel)


Installation with puddle flange


Structural Slab

I.D. rubber rings tosuit 100mm PVC,HDPE & copper

With topping/tiling Cast into slab

100 N.B.


Standard PVC Pipe

Structural Slab

Tiling or topping

Min. height20mm

2.05

130mmRound

(Grid Pattern)100mm Outlet

SPECIAL ORDER ONLY

Grid Pattern (8mm sq. holes)

Cast into slab

AutoCAD SHX Text

SPS




Specification codes:Q130/80SR4 (80mm - polished 304SS)Q130/80SR (80mm - satin 316SS)Q130/85SR (90mm - satin 316SS)Q130SR4 (100mm - polished 304SS)Q130SR (100mm - satin 316SS)

Structural Slab

With topping/tiling

Min. height"A"

Tiling or topping

2.06

N.B.


Structural Slab

Cast into slab


types (see below)

Square grate available in304 or 316 stainless steel.

O-ring outlet pushes intopipe. See below for specificsize & material compatibility.


100mm outlet

80mm90mm

N.B. A B C D

CB

20

100mm

D

Pipe compatibility

PVC and copper20 PVC stormwater only

PVC, HDPE and copper17 44

49

49

90.5

726475 85.5

97

130mmSquare

High-heel friendly pattern (6mm gaps)


AutoCAD SHX Text

SPS



Specification code:Q130/80SRQ4 (80mm, polished 304SS) *special order*Q130/80SRQ (80mm, satin 316SS)Q130SRQ4 (100mm, polished 304SS) *special order*Q130SRQ (100mm, satin 316SS)

130mmSquare

2.07

80mm outlet100mm outlet(Grid Pattern)


PVC, HDPE and copper

PVC and copper

Pipe compatibility


types (see below)

100mm

N.B.

80mm1720

A

90.54449

B

64

C

9772

D

With topping/tiling

Structural Slab

Tiling or topping

"A"Min. height

B

D

N.B.

C


Cast into slab

Structural Slab

Square grate available in304 or 316 stainless steel.

O-ring outlet pushes intopipe. See below for specificsize & material compatibility.

Tiling or topping

Standard PVC Pipe

Structural Slab


Specification code:Q130SR24 (polished 304SS)Q130SR26 (satin 316SS *special order*)




20mmMin. height

100 N.B.



Structural Slab

2.08

100mm outlet(circular grate insert)

130mmSquare

Suggested match for square cleanout model Q130SCR(see section 7)

Optional hex-head security screws (use suffix "/SEC")

41mm 91mm

97mm

AutoCAD SHX Text

SPS

Specification codes:R150GR (linished bronze) *special order*R150NR (linished nickel bronze) *special order*R150SR (satin 316 stainless steel)R150SR4 (polished 304 stainless steel)



Standard PVC Pipe

Structural Slab

Min. height25mm

Tiling or topping

100 N.B.

Typical Application


Structural Slab

2.09

100mm Outlet


SPS150mmRound


55mm88mm

97mm


Standard PVC Pipe




Specification codes:Q150GR (linished bronze) *special order*Q150NR (linished nickel bronze) *special order*Q150SR4 (polished 304 stainless steel)Q150SR (satin 316 stainless steel)



Min. height28mm

Tiling or topping

2.10

100mm N.B.


Structural Slab


100mm Outlet

150mmSquare

65mm88mm

97mm



AutoCAD SHX Text

SPS

SPS 150mm Square Hybrid Floor Waste

Structural Slab

100mm PVC Pipe


100mm N.B.

HDPE pipes.Also suits copper, C.I.&

Typical Application

I.D. Unifin Seal

With 100mm "Unifin" Outlet (SS/PVC)Specification codes:QH150S4F (Polished 304SS grate)QH150S6F (Satin 316SS grate) *special order*

I.D. 81mm

150mm Square FloorWaste with "Unifin"connector to suit allknown 100mm pipes

Polished 304 stainlesssteel hinged grate withPVC underframe ("hybrid"style).

Satin 316 stainless steelavailable as specialorder.

PVC under-frame

Min. height 30mm Topping or Tiling


150mmSquare

2.11

AutoCAD SHX Text

SPS



SPS 150mm Square Push-in Floor DrainSpecification code:Q150SRQ (316 stainless steel)

Standard PVC Pipe

Tiling or topping

28mmMin. height


100mm N.B.


Structural Slab

2.12

100mm Outlet(Grid Pattern)

150mmSquare


65mm88mm

97mm

Specification code:Q200SR (satin 316 stainless steel)Q200SR4 (polished 304 stainless steel)



I.D. rubber ring sealsto suit 100mm PVC,

HDPE & copper



100 N.B.

30mm

Standard PVC Pipe

Tiling or topping

Min. height


2.13

Structural Slab

100mm Outlet

SPS


200mmSquare

68mm88mm

97mm


Load Class C per AS3996-2006


SPS 200mm Square Push-in Floor DrainSpecification code:Q200SRQ (satin 316 stainless steel)


With topping/tiling

100mm N.B.

30mm

Standard PVC Pipe

Tiling or topping

Min. height


2.14

Cast into slab

Structural Slab

I.D. rubber ring tosuit 100mm PVC,HDPE & copper


200mmSquare


68mm88mm

97mm

Standard PVC Pipe

SPS 200/150mm Square Push-in Floor DrainSpecification code:Q200/150SR (satin 316 stainless steel)

Structural Slab

Min. Height30mm

Tiling or Topping

200mmSquare

Also suits copper, C.I.&HDPE pipes.

150 N.B.


146mm

138mmRubber ring seal

2.15

SPS



With topping/tiling

Standard PVC Pipe

Specification code:R225SR (satin 316 stainless steel)



Structural Slab

Tiling or topping

30mm


Min. height

2.16

100mm N.B.

Cast into slab



Structural Slab

SPS 225mmRound

High-heel friendly pattern (5.5mm gaps)

100mm Outlet


225mmRound

Tiling or topping

Min. height

Standard PVC Pipe

Structural Slab

SPS 225mm Round Push-in Floor DrainSpecification code:R225/150SR (satin 316 stainless steel)


25mm

Rubber ring seal

Also suitscopper, C.I. &HDPE pipe


150mm NB


O.D. 146mm

I.D. 138mm

2.17

150mm Outlet

SPS



Specification codes:DG100SL2B/PF (Polished 316 Stainless Steel)Includes 100mm retro-fit puddle flange in ABS plastic


100mm Lo-profile Retro-fit Puddle FlangeSPS Special Square Floor Waste with

Height 18mm - 70mm

Screed/Tiling

Structural Slab

Standard PVC Pipe

Flange OD180mm


1mm spacer fins (x4)

Typical Application

I.D Rubber ring seal


Waterproof membrane

Retro-fit puddle flangewith ultra-thin face.

Domestic-style floorwaste assembly withPVC tail slips insideI.D. of flange. 1mmspacer fins allow forproper leak control.

Currently available inpolished 316 stainlesssteel only.

OD 87mmØ

ID 83mmØ

2.18

Specification codes:R130/87S/PF (satin 316 SS floor waste)R130/87SP/PF (satin 316 SS clean out) *special order*Includes 100mm retro-fit puddle flange in ABS plastic


100mm Lo-profile Retro-fit Puddle FlangeSPS 130mm Round Floor Waste with

Min. Height 25mm

Screed

Structural Slab

Standard PVC Pipe

Flange OD180mm

100mm N.B.



Typical Application



Waterproof membrane


Floor waste assemblyslips inside I.D. offlange. 1mm spacerfins allow for properleak control.

Floor waste availablesatin 316 stainlesssteel.

Satin 316 SS cleanout(solid top) alsoavailable by specialorder.

2.19

AutoCAD SHX Text

SPS

Specification codes:Q130/87S/PF (Polished 304 Stainless Steel)Q130/87S6/PF (Satin 316 Stainless Steel)Includes 100mm retro-fit puddle flange in ABS plastic


100mm Lo-profile Retro-fit Puddle FlangeSPS 130mm Square Floor Waste with

Min. Height 25mm

Screed

Structural Slab

Standard PVC Pipe

Flange OD180mm

100mm N.B.



Typical Application



Waterproof membrane



Available in polished304 or satin 316stainless steel.

Cleanouts alsoavailable - polishedand non-slip.

2.20

AutoCAD SHX Text

SPS

Specification codes:QH150/87S4/PF (Polished 304 Stainless Steel)QH150/87S6/PF (Satin 316 Stainless Steel)Includes 100mm retro-fit puddle flange in ABS plastic*Note: underframe of grate assembly is PVC plastic


100mm Lo-profile Retro-fit Puddle FlangeSPS 150mm Square Floor Waste with

Screed

Structural Slab

Standard PVC Pipe

Flange OD180mm

100mm N.B.


Typical Application



Waterproof membrane

Retro-fit puddle flangewith ultra-thin profile.



Height 35 - 85mm

PVC under-frame

150mmSquare

High-heelfriendly pattern(6mm gaps)

2.21

AutoCAD SHX Text

SPS

With topping/tiling

Specification codes:R150G/Q (bronze grate, CI retro-fit body) *special order*R150N/Q (nickel bronze grate, CI retro-fit body) *special order*R150S4/Q (polished 304 stainless steel grate, CI retro-fit body)R150S/Q (satin 316 stainless steel grate, CI retro-fit body)

150mmRound

Q100Y2BCI retro-fitlower body

Membrane

SPS 150mm Round Retro-fit Floor Drain

Min: 22mmMax: 45mm**

**Optional Extension Piece

40

30

Height AdjustmentTypical Applications

Ø145mm

Cast into slab

Weep holesx 4 Places

2.22

Height-adjustablehigh-heel friendly grateassembly.

Available in bronze,nickel bronze, 304 and316 stainless steel.

Q100Y2B cast ironretro-fit body fits insidea Ø150mm core hole.*316 SS lower bodyavailable by specialorder*


SPS


100mm BSP

Ø190mm (flange diameter)

77mm

E100 PVC adapter(suffix "E")

Tiling/topping

100mm N.B.

100mm outlet

95mm


With topping/tiling


Membrane



40

30


Ø145mm

Cast into slab


2.23Speciality Plumbing Supplies Pty LtdTel: (02) 9417 1900 Fax: (02) 9417 0108 E-mail: [email protected]

100mm BSP


77mm


Tiling/topping

SPS 150mm Square Retro-fit Floor DrainSpecification codes:Q150G/Q (bronze grate, CI retro-fit body) *special order*Q150N/Q (nickel bronze grate, CI retro-fit body) *special order*Q150S4/Q (polished 304 stainless steel grate, CI retro-fit body)Q150S/Q (satin 316 stainless steel grate, CI retro-fit body)

Height-adjustablehinged grate & frame.

Square top available inbronze, nickel bronze,304 and 316 stainlesssteel.

Q100Y2B cast ironretro-fit body fits inside aØ150mm core hole.*316 SS lower bodyavailable by specialorder*

100mm Outlet

150mmSquare

100mm N.B.

95mm



AutoCAD SHX Text

SPS

With topping/tiling


Membrane



40

30


Ø145mm

Cast into slab



100mm BSP


77mm


Tiling/topping

SPS 150mm Square Retro-fit Floor DrainSpecification codes:Q150SQ/Q (satin 316 stainless steel grate, CI retro-fit body) 100mm Outlet

(Grid Pattern)

Height-adjustablehinged grate & frame.

Square top available in316 stainless steel (304stainless steelnon-stock option).

Q100Y2B cast ironretro-fit body fits inside aØ150mm core hole.*316 SS lower bodyavailable by specialorder*

150mmSquare


100mm N.B.

95mm


With topping/tiling


Membrane



40

30

Height Adjustment


Ø145mm

Cast into slab



100mm BSP



77mm


Tiling/topping

SPS 200mm Square Retro-fit Floor DrainSpecification codesQ200G/Q (bronze grate, CI retro-fit body) *special order*Q200N/Q (nickel bronze grate, CI retro-fit body) *special order*Q200S4/C (polished 304 stainless steel grate, CI retro-fit body)Q200S/Q (satin 316 stainless steel grate, CI retro-fit body)

100mm Outlet


Available in bronze,nickel bronze andstainless steel (SSmodel is hinged).


200mmSquare

SPS

6mm Gaps

100mm N.B.

95mm

With topping/tiling


Membrane



40

30

Height Adjustment


Ø145mm

Cast into slab



100mm BSP


77mm


Tiling/topping

Height-adjustablehinged grate assembly.

Available in 316stainless steel.


200mmSquare


Specification codes:Q200SQ/Q (316 stainless steel grate, CI retro-fit body)

SPS 200mm Square Retro-fit Floor Drain100mm Outlet(Grid Pattern)

100mm N.B.


95mm

With topping/tiling


Membrane



40

30

Height Adjustment


Ø145mm

Cast into slab



100mm BSP


77mm


Tiling/topping

SPS 225mm Round Retro-fit Floor DrainSpecification codesR225N/Q (nickel bronze grate, CI retro-fit body) *special order*R225S/Q (316 stainless steel grate, CI retro-fit body)

100mm OutletHeight-adjustablehigh-heel friendly grateassembly.

Available nickel bronzeand 316 stainless steel.


100mm N.B.

SPS225mmRound

High-heel friendlypattern (5.5mm gaps)


95mm

SECTION 3 Vari-level Drains – Vertical Outlets

3.01

3.02

3.03

3.04

3.05

3.06

3.07

3.08

3.09

3.10

3.11

3.12

3.13

3.14

3.15

3.16

3.17

3.18

3.19

3.20

3.21

100mm Round

100mm Square

130mm Round

130mm Square

130mm Square (Grid Pattern)

130mm Round

130mm Square


150mm Round

150mm Square


200mm Square


225mm Round

100m Truflo – Vari-Level Floor Drains

200mm Square (150 outlet)

225mm Round (150 outlet)


300mm Round (150 outlet)


300mm Square - Special Fine Pattern (150 outlet)

To suit pipe size (mm):

50 / 65

50 / 65

50 / 65

50 / 65

50 / 65

100

100

100

100

100

100

100

100

100

100

150 (or 100)

150 (or 100)

150 (or 100)

150 (or 100)

150 (or 100)

150 (or 100)

Specification code:R100G/C65 (bronze grate, CI lower body) *special order*R100N/C65 (nickel bronze grate, CI lower body) *special order*R100S4/C65 (polished 304 stainless steel grate, CI lower body)R100S/C65 (satin 316 stainless steel grate, CI lower body)

SPS

Typical Application

65mm BSP

'B'

A9060

N.B

SPS 100mm Round Vari-Level Vertical Drain


'A'

65

N.B.50

C65A CIlower body

100mmRound

Height adjustment:Min. 20mmMax. 65mm

Outlet pushes into 65mmPVC or copper with o-ringconnection, or connects to50mm PVC / HDPE withno-hub coupling.180

180B

Weep slots3 x places

Membrane

3.01

Tiling/Paving/Topping

Round grate available inpolished 304 & satin 316Stainless Steel. Bronze andnickel-bronze available byspecial order order.

Cast iron lower body andreversible membrane clampcollar with female 65mm BSPthread.

65/50mm Outlet

Specification code:Q100G/C65 (bronze grate, CI lower body) *special order*Q100N/C65 (nickel bronze grate, CI lower body) *special order*Q100S4/C65 (polished 304 stainless steel grate, CI lower body)Q100S/C65 (satin 316 stainless steel grate, CI lower body)

SPS

Typical Application

'B'

65mm BSP

9060

N.B

SPS 100mm Square Vari-Level Vertical Drain


'A'

6550

N.B.

C65A CIlower body


Membrane

Outlet pushes into 65mmPVC or copper with o-ringconnection, or connects to50mm PVC / HDPE withno-hub coupling.180

A B180


3.02


Square grate available inpolished 304 & satin 316stainless steel. Bronze &nickel-bronze available byspecial order only.


65/50mm Outlet

Specification code:R130S/C65 (satin 316 stainless steel grate, CI lower body)R130S4/C65 (polished 304 stainless steel grate, CI lower body)



'A'


Outlet pushes into 65mmPVC or copper with o-ringconnection, or connects to50mm PVC / HDPE withno-hub coupling.

N.B

1801806065

N.B.50 90

A B

'B'

65mm BSP

C50A CIlower body


Membrane

3.03

65/50mm Outlet

Round grate available inpolished 304 or satin316 stainless steel.


Typical Application

130mmRound


AutoCAD SHX Text

SPS


Specification code:Q130S/C65 (satin 316 stainless steel grate, CI lower body)Q130S4/C65 (polished 304 stainless steel grate, CI lower body)



'A'


N.B

65 6050

N.B.90A

180180B

'B'

65mm BSP

C65A CIlower body


Membrane

3.04

Square grate available inpolished 304 or satin316 stainless steel.


65/50mm Outlet

130mmSquare

SPS

Typical Application



Specification code:Q130S/C65 (satin 316 stainless steel grate)Q130S4/C65 (polished 304 stainless steel grate)Includes 65/50mm cast iron lower body

'A'




N.B

906065

50N.B. A

180

B180

65mm BSP

'B'

C65A CIlower body


Membrane

3.05

Square grate available inpolished 304 or satin316 stainless steel.


65/50mm Outlet(Square Hole Pattern)

Typical Application

130mmSquare


Membrane flange 235Ø

95mm

Specification codes:R130S4/C (polished 304 stainless steel grate)R130S/C (satin 316 stainless steel grate)Includes 100mm cast iron lower body



Height adjustment:Min. 20mmMax. 55mm**

30


40

65mm

Optionalcoupling

connection

Push-inconnection

(specify: -R)100mm N.B.

Typical Application

C100A CIlower body



Membrane

3.06

Height-adjustable grateassembly.


C100A CI "deluxe"lower body withreversible clamp collar.

130mmRound

AutoCAD SHX Text

SPS


Specification codes:Q130S4/C (polished 304 stainless steel grate)Q130S/C (satin 316 stainless steel grate)Includes 100mm cast iron lower body


3.07

100mm Outlet




130mmSquare

SPS


95mm


30


40

65mm

Optionalcoupling

connection

Push-inconnection


Typical Application

C100A CIlower body



Membrane

C100A CIlower body

95mm



Specification codes:Q130SQ4/C (polished 304 stainless steel grate)Q130SQ/C (satin 316 stainless steel grate)Includes 100mm cast iron lower body


30


40


65mm

100mm N.B.

Push-inconnection

(specify: -R)

Optionalcoupling

connection

Typical Application



Membrane

3.08





130mmSquare



SPS 150mm Round Vari-Level Vertical DrainSpecification codes:R150G/C (bronze grate, CI lower body) *special order*R150N/C (nickel bronze grate, CI lower body) *special order*R150S4/C (polished 304 stainless steel, CI lower body)R150S/C (satin 316 stainless steel grate, CI lower body)

Typical Application




Push-inconnection

(specify: -R)

65mm


100mm N.B.

Optionalcoupling

connection

30

40

95mm

C100A CIlower body

3.09

Membrane

100mm Outlet


SPS150mmRound

Heigh-adjustable high-heelfriendly grate assembly.

Available in polished 304 &satin 316 stainless steel.Bronze and nickel-bronzeavailable by special orderonly.

C100A "deluxe" CI lowerbody with reversible clampcollar.



95mm


SPS 150mm Square Vari-Level Vertical DrainSpecification codes:Q150G/C (bronze grate, CI lower body - non-stock option)Q150N/C (nickel bronze grate, CI lower body)Q150S4/C (polished 304 stainless steel, CI lower body)Q150S/C (satin 316 stainless steel grate, CI lower body)

Typical Application

Membrane


Push-inconnection

(specify: -R)


65mm



Optionalcoupling

connection 100mm N.B.

30

40

C100A CIlower body

3.10

Height-adjustable hingedgrate assembly.

Available in polished 304 &satin 316 stainless steel.Bronze and nickel-bronzeavailable by special orderonly.

C100A CI "deluxe" lowerbody with reversible clampcollar.

100mm Outlet


150mmSquare


AutoCAD SHX Text

SPS

SPS 150 Square Vari-Level Vertical DrainSpecification codes:Q150SQ/C (316 stainless steel grate, CI lower body)


150mmSquare

3.11


Available in satin 316stainless steel only.



95mm

Height adjustment:Min. 25mmMax. 60mm** Typical Application


65mm


Push-inconnection

(specify: -R)


Membrane

30

100mm N.B.

Optionalcoupling

connection40

C100A CIlower body


95mm

SPS 200mm Square Vari-Level Vertical DrainSpecification codes:Q200G/C (bronze grate, CI lower body) *special order*Q200N/C (nickel-bronze grate, CI lower body) *special order*Q200S4/C (polished 304 stainless steel, CI lower body)Q200S/C (satin 316 stainless steel grate, CI lower body)





65mm


Membrane


Optionalcoupling

connection

Push-inconnection


40

30

Typical Application

C100A CIlower body

3.12


Available in polished 304 &satin 316 stainless steel.Bronze and nickel -bronzeavailable by special orderonly.


100mm Outlet


200mmSquare SPS


Load Class C perAS3996-2006

200mmSquare

95mm

40

30

SPS 200mm Square Vari-Level Vertical DrainSpecification codes:Q200SQ/C (satin 316 stainless steel grate, CI lower body)



Typical Application


65mm


100mm N.B.

Optionalcoupling

connection


Push-inconnection

(specify: -R)

C100A CIlower body

Weep holes3 x places

Membrane

3.13

Height-adjustablehinged grate assembly.



100mm Outlet(Grid Pattern)

Grid Pattern (8mm square holes )

95m

m

Specification codes:R225N/C (nickel bronze grate, CI lower body) *special order*R225S/C (satin 316 SS grate, CI lower body)





65mm

Membrane flange Ø235

110 O.D.100mm N.B.

Optionalcoupling

connection40

30 Push-inconnection

(specify: -R)

Typical Application

C100ACI lowerbody


Membrane

3.14


100mm OutletHeight-adjustablehigh-heel friendly grateassembly.

Available in satin 316stainless steel. Polished304SS and nickel-bronzeavailable by special orderonly.

C100A "deluxe" CI lowerbody with reversibleclamp collar.

SPS225mmRound




Further to page 1.01 - the 100mm Truflo RWO can be converted into a vari-level drain body with aCC100 reversible clamp collar. The following 100mm BSP grate assemblies can then be installed:

SPS 100mm Truflo Vari-Level Floor Drains

A

E


G

F

Min / Max**


Integral puddle flange Ø 270mm

N.B

100 260

A

240

B

103C

106D E

28 45F

CC100 reversible clamp collar

Vari-level grate assembly - see chart

N.B.

C

D

Optional PVC tailpiececonnector (suffix "E")

Structural slab

200 x 200shown

3.15

25G

20mm / 50mm

20mm / 50mm

20mm / 50mm

25mm / 60mm

25mm / 60mm

25mm / 60mm

30mm / 70mm

30mm / 70mm

30mm / 70mm

Min / Max**Height Adjustment

** = EP100 extension piece available to extend height

R130S

Q130S

Q130SQ

R150S

Q150S

Q150SQ

Q200S

Q200SQ

R225S

R130S4

Q130S4

Q130SQ4

R150S4

Q150S4

Q150SQ4

Q200S4

Q200SQ4

R225S4

n/a

n/a

n/a

R150N

Q150N

n/a

Q200N

n/a

R225N

n/a

n/a

n/a

R150G

Q150G

n/a

Q200G

n/a

n/a

130mm Round

130mm Square

130mm Square*

150mm Round

150mm Square

150mm Square*

200mm Square

200mm Square*

225mm Round

* = grid pattern

304SS316SS Ni-Br Bronze

**For additional height, useEP150 extension piece

150mm outlet shownwith PVC tailpiece

(in-pipe connector)

86mm


Membrane


Specification code:Q200S4/C150 (polished 304 stainless steel grate, CI lower body)Q200S/C150 (satin 316 stainless steel grate, CI lower body)For a 100mm outlet, use suffix "C100" not "C150"


98mm

100mm outlet shownwith optional couplingconnector

Integral puddle flange Ø270

150 or 100mm N.B.

Typical Application

Structural Slab

3.16

150mm Outletor 100mm Outlet

Height-adjustable hingedgrate & frame.

Grate assembly available inpolished 304 and satin 316stainless steel.

150mm or 100mm Truflo CIlower body with 150mmBSP reversible clamp collar.

SPS200mmSquare





Structural

Membrane

86mm


(in-pipe connector)

225mmRound

SPS 225mm Round Vari-Level Vertical DrainSpecification code:R225N/C150 (nickel-bronze grate, CI lower body) *special order*R225S4/C150 (Polished 304SS grate, CI lower body) *special order*R225S/C150 (Satin 316SS grate, CI lower body)For a 100mm outlet, use suffix "C100" not "C150"


98mm



150 or 100 N.B.

Typical Application

Slab


3.17


Height-adjustable highheel-friendly grateassembly.

Grate assembly available316 stainless steel.Polished 304SS andnickel-bronze availableonly by special order.

150mm or 100mm TrufloCI lower body with150mm BSP reversibleclamp collar.


SPS





Structural

86mm


(in-pipe connector)

225mmSquare

SPS 225mm Square Vari-Level Vertical DrainSpecification code:Q225N/C150 (nickel-bronze grate, CI lower body) *special order*Q225S/C150 (316 stainless steel grate, CI lower body)For a 100mm outlet, use suffix "C100" not "C150"


Membrane

98mm



150 or 100 N.B.

Typical Application


Slab

3.18


Height-adjustable hingedgrate & frame.

Grate assembly available insatin 316 stainless steel.Nickel-bronze available byspecial order only.

150mm or 100mm Truflo CIlower body with 150mmBSP reversible clamp collar.

SPS





Structural

Membrane

86mm

SPS 300mm Round Vari-Level Vertical DrainSpecification code:R300D/C150 (galvanised ductile iron grate, CI lower body)R300S/C150 (satin 316 stainless steel grate, CI lower body)For a 100mm outlet, use suffix "C100" not "C150"


300mmRound

98mm




150 or 100 N.B.

Typical Application

Slab

3.19


Height-adjustableround grate & frame.

Grate assemblyavailable in galvanisedducktile iron,nickel-bronze, and 316stainless steel.

150mm or 100mmTruflo CI lower bodywith 150mm BSPreversible clampcollar.

SPS




(in-pipe connector)

Structural

Specification codes:Q300D/150C (galvanised ductile iron grate, CI lower body)Q300S4/150C (polished 304 stainless steel grate, CI lower body)Q300S/150C (satin 316 stainless steel grate, CI lower body)For a 100mm outlet, use suffix "C100" not "C150"

86mm


(in-pipe connector)



Membrane


300mmSquare

98mm


Ø270

150 or 100 N.B.

Typical Application


Slab

3.20

Height-adjustablehinged grate &frame.

Grate assemblyavailable in nickelbronze, ductile ironand 316 stainlesssteel.

150mm or 100mmTruflo CI lower bodywith 150mm BSPreversible clampcollar.


SPS




Structural

86mm


(in-pipe connector)

300mmSquare6mmGaps

SPS 300mm Square Fine Pattern Vertical DrainSpecification code:Q300S24/C150 (polished 304 SS grate, 150mm CI lower body)Q300S2/C150 (satin 316 SS grate, 150mm CI lower body)For a 100mm outlet, use suffix "C100" not "C150"


Membrane


98mm


150 or 100 N.B.


Stainless steel grate/frame

CI under-frame

Typical Application

Slab

3.21

(Vari-Level)

Special high-heelfriendly grate pattern.

Available in polished304 and satin 316stainless steel.

150mm or 100mmTruflo CI lower bodywith 150mm BSPreversible clamp collar.

SPS


SECTION 4 Vari-level Drains – 90° Outlets

4.01

4.02

4.03

4.04

4.05

4.06

4.07

4.08

4.09

4.10

4.11

4.12

4.13

4.14

4.15

Vari-Level Drains - Side Outlet

100mm Round

100mm Square

130mm Round

130mm Square


150mm Round

150mm Square

150mm square (Grid Pattern)

200mm Square


225mm Round

225mm Square

300mm Round

300mm Square

300mm Square (Fine Pattern)

To suit pipe size:

50 / 65

50 / 65

50 / 65

50 / 65

50 / 65

80 & 100

80 & 100

80 & 100

80 & 100

80 & 100

80 & 100

80 & 100

80 & 100

80 & 100

80 & 100

100mmRound

Specification code:R100G/C90 (bronze grate, ABS lower body) *special order*R100N/C90 (nickel-bronze grate, ABS lower body) *special order*R100S4/C90 (polished 304 stainless steel, ABS lower body)R100S/C90 (satin 316 stainless steel grate, ABS lower body)

'C''A'

SPS 100mm Round Vari-Level Side Outlet Drain

'D'

Outlet pushes into 65mm PVC or copper with o-ring connection,or connects to 50mm PVC/HDPE with no-hub coupling.

StructuralSlab

Membrane



200200

A

105100

N.B.

6550

B

3740

C

180180

D

65mm BSP

N.B

Weep slots3 x places 'B'

4.01

65/50mm outlet

Typical Application

SPS

Round grate available inpolished 304 & satin 316stainless Steel. Bronze andnickel-bronze available byspecial order only.

ABS 90° Body and ReversibleMembrane Clamp Collar withfemale 65mm BSP thread.



Outlet pushes into 65mm PVC or copper with o-ring connection,or connects to 50mm PVC/HDPE with no-hub coupling.

200200

100105

5065

N.B. A

3740B

180180

C D

4.02

Squre grate available in polished304 & satin 316 stainless Steel.Bronze and nickel-bronzeavailable by special order only.


SPS 100mm Square Vari-Level Side Outlet Drain

'C''D'

'A'

SPS

Membrane

StructuralSlab


65mm BSP

Typical Application

Specification code:Q100G/C90 (bronze grate, ABS lower body) *special order*Q100N/C90 (nickel bronze grate, ABS lower body) *special order*Q100S4/C90 (polished 304 stainless steel, ABS lower body)Q100S/C90 (satin 316 stainless steel grate, ABS lower body)


N.B

'B'


65/50mm outlet



SPS 130mm Round Vari-Level Side Outlet DrainSpecification code:R130S4/C90 (polished 304 stainless steel, ABS lower body)R130S/C90 (satin 316 stainless steel grate, ABS lower body)

StructuralSlab

'C''A''D'

Outlet pushes into 65mm PVC or copper with o-ring connection, orconnects to 50mm PVC/HDPE with no-hub coupling.


Membrane


130mmRound

N.B.

6550

A

105100

CB4037

180180

D

200200

65mm BSP

N.B



'B'

4.03

65/50mm outlet

Typical Application

Round grate assemblyavailable in polished 304 orsatin 316 stainless steel.

ABS 90° Body andReversible Membrane ClampCollar with female 65mmBSP thread.


AutoCAD SHX Text

SPS

SPS 130mm Square Vari-Level Side Outlet DrainSpecification code:Q130S4/C90 (polished 304 stainless steel, ABS lower body)Q130S/C90 (satin 316 stainless steel grate, ABS lower body)


'A'

'B'

N.B

Membrane



65 10550N.B.

100A

18037 200

C18040

B200D

65mm BSP'C'

'D'

StructuralSlab


4.04

65/50mm outlet


Square grate assemblyavailable in polished 304 orsatin 316 stainless steel.

uPVC 90° Body andReversible Membrane ClampCollar with female 65mm BSPthread.

Typical Application

130mmSquare


AutoCAD SHX Text

SPS

SPS 130mm Square Vari-Level Side Outlet Drain

StructuralSlab

'D''C'



'A'


Specification code:Q130SQ4/C90 (polished 304 stainless steel, ABS lower body)Q130SQ/C90 (satin 316 stainless steel grate, ABS lower body)

130mmSquare

'B'

N.B

3710565

A100

N.B.50 40

B

200180

D200180

C

65mm BSP


Membrane

4.05

Square grate assemblyavailable in polished 304 orsatin 316 stainless steel.


65/50mm outlet(Grid Pattern)

Typical Application Tiling/Paving/Topping

Height adjustment:Min. 25mmMax. 60mm*

BA


D

80

100

N.B.

260

260

A

240

240

B

62

83

C

* EP100 extension piece available to increase max. height

StructuralSlab

Membrane

CC100 clamp collar withweep holes 6 x places

Typical Application

4.06

115

140

D

28

28

E

C N.B.

E

Topping / Tiling / Paving


SPS 150mm Round Vari-Level Floor DrainWith Side-Outlet Lower Body

Specification codes:R150G/C109 (bronze grate, CI lower body) *special order*R150N/C109 (nickel bronze grate, CI lower body) *special order*R150S4/C109 (polished 304 SS grate, CI lower body)R150S/C109 (satin 316 SS grate, CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm

150mmRound

SPS


Available polished 304 and316 stainless steel. Bronzeand nickel-bronze availableby special order only.

CI "Truflo" side-outlet lowerbody with 100mm BSPreversible clamp collar.



Membrane


Specification codes:Q150G/C109 (bronze grate, CI lower body) *special order*Q150N/C109 (nickel bronze grate, CI lower body) *special order*Q150S4/C109 (polished 304SS, CI lower body)Q150S/C109 (satin 316SS grate, CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm

D

SPS 150mm Square Vari-Level Floor DrainWith Side-Outlet Lower Body


Typical Application

E




StructuralSlab

BA

4.07

N.B.C


Available in polished 304 andsatin 316 stainless steel.Bronze and nickel-bronzeavailable by special orderonly.



80

100

N.B.

260

260

A

240

240

B

62

83

C115

140

D

28

28

E


150mmSquare


AutoCAD SHX Text

SPS

D


SPS 150mm Square Vari-Level Floor DrainSide-Outlet Lower Body (Grid Pattern)

Specification codes:Q150SQ/C109 (satin 316SS grate, CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm

AB





StructuralSlab

Membrane

Typical Application

4.08

N.B.C

E


Height-adjustable hinged grateassembly. Grate pattern 8mmsquare holes.

Available in satin 316 stainlesssteel only.


80

100

N.B.

260

260

A

240

240

B

62

83

C115

140

D

28

28

E


150mmSquare




D

Specification codes:Q200G/C109 (bronze grate, CI lower body) *special order*Q200N/C109 (nickel bronze grate, CI lower body) *special order*Q200S4/C109 (polished 304SS grate, CI lower body)Q200S/C109 (satin 316 SS grate, CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm


E



A

260

260

N.B.

80

100

B

240

240

62

83

C115

140

D

28

28

E

Typical Application

StructuralSlab

AB


Membrane

4.09

C N.B.



Available in polished 304 andsatin 316 stainless steel.Bronze and nickel-bronzeavailable by special orderonly.


200mmSquare

SPS



Specification code:Q200SQ/C109 (satin 316 SS grate, 100mm CI lower body)Q200SQ/C89 (satin 316 SS grate, 80mm CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm

SPS 200mm Square Vari-Level Floor DrainSide-Outlet Lower Body, Grid Pattern



Height - adjustable grateassembly. Grate pattern8mm square holes.


CI "Truflo" side-outletlower body with 100mmBSP reversible clampcollar.200mm

Square


Membrane

N.B.

100

StructuralSlab

AB



D

80

D115

140

240

240260

260

A

83

C

62

B

28

28E


Typical Application

N.B.C


E


100

N.B.

80

140

115D

240

240

260

260

A

83

62

CB

28

28E

StructuralSlab

AB


* Not including EP100 extension piece

Specification codes:R225N/C109 (nickel bronze grate, CI lower body) *special order*R225S/C109 (satin 316 SS grate, CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm

D



Membrane

225mmRound

4.11


Typical Application

N.B.C


E


Height-adjustable heel-friendlygrate assembly.

Available in satin 316 stainlesssteel. Nickel-bronze andpolished 304SS available byspecial order only.


SPS



BA

100

N.B.

80

140

115D

240

240

260

260

A

83

62

CB

28

28E

**EP150 extension piece available to increase max. height

SPS

Specification codes:Q225N/C109 (nickel bronze grate, CI lower body) *special order*Q225S/C109 (satin 316 SS grate, CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm

D



StructuralSlab

Membrane

225mmSquare

4.12



CN.B.


E


Available in satin 316stainless steel. Nickel-bronzeavailable by special orderonly.


Load tested to Class C ofAS3996-2006.



Typical Application

B

A


Specification codes:R300D/C109 (galvanised ductile iron grate, CI lower body)R300S/C109 (satin 316 SS grate, CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm

D


80

100

N.B.

StructuralSlab


Membrane

300mmRound

4.13


240260

260 240

A B11562

83 140

C D

28

28

E


E

C N.B.

Topping / Tiling/ Paving


Available in galvanisedductile iron and 316stainless steel.



SPS


Typical Application


Specification codes:Q300D/C109 (galvanised ductile iron grate, CI lower body)Q300S4/C109 (polished 304 SS grate, CI lower body)Q300S/C109 (satin 316 SS grate, CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm

Height adjustment:Min. 30mmMax. 90**


B

A

StructuralSlab


D

100 260 240 83 140


N.B.

80

Membrane

260

A

240

B C

62 115D

28

4.14

C N.B.

28E


E


300mmSquare SPS


Available in galvanisedductile iron and 316stainless steel.




Typical Application


Membrane


SPS 300mm Square Fine Pattern DrainWith Side-Outlet Lower Body

D


300mmSquare6mmGaps

SPS

Specification code:Q300S24/C109 (polished 304 SS grate, 100mm CI lower body)Q300S2/C109 (satin 316 SS grate, 100mm CI lower body)Side outlet - "C109" = 100mm; "C89" = 80mm


B

A

StructuralSlab


E


Stainless steel grate/frame

CI under-frame

4.15

N.B.C

Height-adjustable grateassembly withhigh-heel-friendly pattern.

Available in polished 304and satin 316 stainlesssteel.

CI "Truflo" side-outletlower body with 150mmBSP reversible clampcollar.



Typical Application


260

260

N.B.

80

100

62

83

B

240

240

A C115

140

D

28

28

E

SECTION 5 Vinyl Floor Wastes

5.01

5.02

5.03

5.04

5.05

5.06

5.07

5.08

5.09

5.10

5.11

5.12

5.13

5.14



135mm Round - Push-in - Unifin


135mm Round - Push-in - with 1.25” socket for portable baths

125mm Round - Low-profile - with retro-fit puddle flange

125mm Round - Low-profile - Unifin

125mm Round - Low-profile

220mm Round - Push-in (150 outlet)

125mm Round - Low-profile - Vari-level

155mm Round - Vari-level

220mm Round - Vari-level (150 outlet)

155mm Round - Vari-level - 90° Outlet

220mm Round - Vari-level - 90° Outlet


50

80

100

100

100

100

100

100

150

100

100

150

80 & 100

80 & 100

5.01

SPS 50mm Push-In Sheet Vinyl Floor Waste

with rim

I.D. rubber ring seal

50mm PVC Pipe

Structural slab

Base centred in core holeSteel trowel screed flush

Clamp Ring

Push-in floor waste assembly for sheetvinyl flooring.

Available in all 304 stainless steel. 316stainless steel top available by specialorder only.

O-ring adapts outlet to 50mm PVC.

DIMENSION IN MILLIMETRESOUTLET

112

Vinyl Floor

C

DIAMETER

50

ØA

100

ØB

DIMENSIONAL DATA

NOMINAL

Typical Application

35

ØC

Specification codes:LG50SSA4 (entire assembly in 304 stainless steel)LG50SSA6 (316 SS ring/grate, 304 SS body) *special order*

Speciality Plumbing Supplies Pty LtdTel:(02) 9417 1900 Fax:(02) 9417 0108 E-mail: [email protected]

ØD

42

AutoCAD SHX Text

A

AutoCAD SHX Text

B

Specification codes:V80SVA (304 stainless steel ring & grate, ABS body)V80SVA6 (316 stainless steel ring & grate, ABS body)V80SSA4 (All-304 stainless steel assembly)V80SSA6 (316 SS ring/grate, 304SS body) *special order*

SPS 80mm Push-in Sheet Vinyl Floor Waste

Ø130mm

5.02

28mm

53mmI.D. 64mm

O.D. 72mm

80mm Pipe

117mm

Typical ApplicationSheet Vinyl

Cement Screed

Structural Slab

SPS

Push-in floor wasteassembly for sheetvinyl flooring.

Vinyl floor drain bodyavailable in ABS and304. 316SS bodyavailable by specialorder.

Ring & grate availablein polished 304 and316 stainless steel.

O-rings adapt outlet to80mm PVC & copperpipe.


SPS 100mm Push-in Vinyl Floor Waste

Structural Slab

100mm PVC Pipe


100mm N.B.


I.D. Unversal Fin-Seal

& Cleanout with Universal Fin-SealSpecification codes:VH87CPA (ABS body, chrome-plated zinc-alloy top)VH87SVA (ABS body, polished 304SS top)*Cleanout (polished) VH87SPA (ABS body, 304SS* top)Cleanout (non-slip) VH87SPNA (ABS body, 304SS* top)* for 316, use "6" as suffix, eg "VH87SVA6"

I.D. 81mm

Sheet vinyl flooring

Vinyl floor waste slipsinside 100mm PVC,HDPE and copper withthe same UniversalFin-Seal connector.

Grates/rings available inchrome-plated zincalloy,polished 304SS and satin316SS.

Cleanout tops available inpolished or non-slip304SS. 316SS non-stockoption.

Cement Screed

Typical Application

33mm

5.03

135mm SPS

*5mm bar x 5mm gap heel friendly design*

Drain body OD 150mm

Structural Slab

Specification codes:V100SVA (ABS body, polished 304 SS ring & grate)V100SVA6 (ABS body, polished 316 SS ring & grate)V100SSA4 (Assembly in polished 304 stainless steel)V100SSA6 (Assembly in polished 316 stainless steel)

SPS 100mm Push-in Sheet Vinyl Floor Waste

135mm

Cement Screed

Sheet Vinyl

Ø150mm

I.D. 88mm

O.D. 97mm

50mm

25mm

Typical Application

100mm Pipe

5.04

Tamper-proof screws optional

Push-in floor waste assemblyfor sheet vinyl flooring.

Drain body available in ABS,zinc-alloy and 304 gradestainless steel. 316SSavailable by special order.

Ring & grate available inchrome-plated zinc-alloy orpolished 304 grade stainlesssteel. 316SS available byspecial order.

O-rings adapt outlet to100mm PVC, copper, HDPEor CI pipe.

Watermarked underATS5200:040 (ref: 20052)

SPS


*5mm bar x 5mm gap heel friendly design*

Structural Slab

Specification codes:V100SVA-HP(ABS body, polished 316 SS ring & grate)V100SSA6-HP (polished 316 SS ring & grate, drain body 304SS)

135mm

Cement Screed

Sheet Vinyl

Ø150mm

I.D. 88mm

O.D. 97mm

50mm

25mm

Typical Application

100mm Pipe

5.05

Tamper-proof screws optional


SPS 100mm Push-in Sheet Vinyl Floor Waste(with 1.25" socket for portable bath outlet)


Grate includes a hosepipe socket suitablefor 1.25" i.d. hose, toenable directconnection into floorgrate.

Ring & grate availablein polished 316SSonly. Drain bodyavailable in ABSplastic or 304SS.

O-rings adapt spigotto 100mm PVC,copper, HDPE and CIpipe.

Grate (with 1.25" hose socket)Clamp Ring

Screed

Specification codes:Floor waste: LG87SVAP (ABS body, 304SS top)Cleanout (polished) LG87SVPAP (ABS body, 304SS top)Cleanout (non-slip) LG87SVPNAP (ABS body, 304SS top)Includes PF100 puddle flange

with slip-in Low Profile Vinyl Floor WasteSPS 100mm Retro-fit Puddle Flange

Min. Height 20mm

Structural Slab

Standard PVC Pipe

PuddleFlange OD

180mm

125mm

HDPE pipes.


Also suits copper, C.I.&



Waterproof membrane


100mm N.B.


Ø 81mm

5.06

Drain body OD142mm


Low profile vinyl floorwaste slips inside I.D.of flange. 1mm spacerfins allow for properleak control.

Polished 304-gradestainless steel ring andgrate.

Cleanouts alsoavailable - polishedand non-slip.

Watermarked underATS5200:040 lic. no.20052

SPS

Typical Application

Ø 97mm

Do not block spacerfins with liquidmembrane or leakcontrol will not work!

SPS 100mm Extra Compact Push-in

Structural Slab

100mm PVC Pipe


100mm N.B.


Typical Application

I.D. Uni-fin Seal

Vinyl Floor Waste/Cleanout with Uni-Fin

Min. Height 22mm

Specification codes:Floor waste: LG87SVAF (ABS body, 304SS top)Cleanout (polished) LG87SVPF (ABS body, 304SS top)Cleanout (non-slip) LG87SVPNF (ABS body, 304SS top)

Screed

I.D. 81mm

125mmSheet vinyl flooring

Lo-profile vinyl floorwaste slips inside 100mmPVC, HDPE and copperwith the new Uni-finadapter.

Polished 304-gradestainless steel ring andgrate, ABS plastic lowerbody

Cleanout tops alsoavailable - polished ornon-slip 304SS/

Drain body OD142mm

5.07

AutoCAD SHX Text

SPS

SPS 100mm Ultra Compact Push-in

Structural Slab

100mm PVC Pipe


100mm N.B.


Typical Application

ID Rubber Ring Seal

Vinyl Floor Waste/Cleanout

Min. Height 20mm

Specification codes:Floor waste: LG810SVA (ABS body, 304SS top)Cleanout (polished) LG810SPA (ABS body, 304SS top)Cleanout (non-slip) LG810SPNA (ABS body, 304SS top)

Screed

125mm

SPS


Lo-profile vinyl floorwaste slips inside 100mmPVC, HDPE and copperwith appropriate o-rings.

Polished 304-gradestainless steel ring andgrate, ABS plastic lowerbody

Cleanout tops alsoavailable - in polished ornon-slip 304SS.

Drain body OD142mm

Ø87

Ø97

Ultra-compact:Vinyl ClampOD 125mm

5.08

Min. height: 25mm

HDPE pipes.

Rubber ring seal


Ø240mm

150mm NB

Typical Applicatioin

O.D. 146mm

I.D. 138mm

Standard PVC Pipe

Structural Slab

Vinyl floorClamp ring

5.09

Cementscreed

Push-in floor wasteassembly for sheet vinyl.

Drain body available in304 stainless as standardor 316 stainless steel asnon-stock option.

Ring & Grate available inpolished 304 and 316stainless steel.

SPS 220mm Sheet Vinyl Floor Waste(150mm Push-in)

Ø220 SPS

Specification codes:LG150SSA4 (All-304 stainless steel)LG150SSA6 (All-316 stainless steel)



95mm

** Optionalextension

piece

Specification codes:LG810S4/C (304 SS vinyl floor waste, CI lower body)LG810S6/C (316 SS top, 304 SS drain body, CI lower body)* for retro-fit body use "/Q" instead of "/C"

Clamping ring


65mm

235Ø

Push-inconnection

(specify: -R)

100mm N.B.

Optionalcoupling

connection

30

40

Typical Application

Cement screed

5.10

Q100Y2B retro-fitlower body(optional)

Height-adjustable vinylfloor waste assembly.

Vinyl floor drain bodyavailable in 304 stainlesssteel; 316 stainless steelavailable by special order.

Ring & grate available inpolished 304 stainless steel;316 stainless steelavailable by special order.

C100A CI "deluxe" lowerbody with reversible clampingcollar ("/C").

Q100Y optional CI retro fitlower body fits inside150mmØ core hole ("/Q").

77mm


Ø87

Ø125

Vinyl Sheet


SPS 100mm Ultra Compact Vari-LevelSheet Vinyl Floor Drain - Ø125mm Inlet

Drain body OD142mm

SPS


95mm


piece

Specification codes:LG100S4/C (304 SS vinyl floor waste, CI lower body)LG100S6/C (316 SS top, 304 SS drain body, CI lower body)* for retro-fit body use "/Q" instead of "/C"

SPS 100mm Vari-Level Sheet Vinyl Floor Drain

Clamping ring

Sheet Vinyl Floor


65mm

235Ø

Push-inconnection

(specify: -R)

100mm N.B.

Optionalcoupling

connection

30

40

Typical Application

Cement screed

5.11


Membrane

Ø155mm Inlet

Height-adjustable vinyl floor wasteassembly.

Vinyl floor drain body available in 304stainless steel; 316 stainless steel availableby special order.

Ring & grate available in polished 304stainless steel; 316 stainless steel availableby special order.

C100A CI "deluxe" lower body withreversible clamping collar ("/C").

Q100Y optional CI retro fit lower body fitsinside 150mmØ core hole ("/Q").

77mm


AutoCAD SHX Text

DIMENSION IN MILLIMETRES

AutoCAD SHX Text

DIMENSIONAL DATA

AutoCAD SHX Text

DIAMETER

AutoCAD SHX Text

OUTLET

AutoCAD SHX Text

NOMINAL

AutoCAD SHX Text

100

AutoCAD SHX Text

175

AutoCAD SHX Text

%%CA

AutoCAD SHX Text

155

AutoCAD SHX Text

%%CB

AutoCAD SHX Text

A

AutoCAD SHX Text

B

AutoCAD SHX Text

S P S



86mm

SPS 150mm Vari-Level Sheet Vinyl Floor DrainSpecification codes:LG150S4/C150 (polished 304SS ring/grate, 304SS drain body)LG150S/C150 (satin 316SS grate, 304SS drain body)Includes 150mm Truflo CI cast-in lower bodyFor a 100mm outlet, use suffix "C100" not "C150"

98mm


150 or 100 N.B.



(in-pipe connector)

Structural Slab

5.12


Height-adjustable vinylfloor waste assembly.

Drain body available in304 stainless steel.

Ring & Grate availablein polished 304stainless steel. Satin316 stainless steelavailable by specialorder.

150 or 100mm "Truflo"CI lower body with150mm clamp collar.

Ø220mm Inlet

Vinyl floor

Membrane

Ø220

Typical Application

Cement Screed

Clamp ring

SPS


Specification codes:LG100S4/C109 (polished 304 SS floor waste, CI lower body)LG100S6/C109 (satin 316 SS floor waste, CI lower body)For 80mm outlet, use suffix "C89" not "C109"

Height adjustment:Min. 30mmMax. 50mm *

155mm Round Sheet Vinyl Floor DrainVari-Level Side-Outlet Lower Body

N.B.

100

D


80

C N.B.

Outside edge of Pipe

5.13


Ø175mm

Ø155mm

Height-adjustable, side outlet vinyl floorwaste assembly.

Drain body available in 304 stainlesssteel. 316 stainless steel available byspecial order.

Grate & ring available in polished 304.Satin 316 stainless steel available byspecial order.

CI Truflo 90° lower body with 100mmreversible clamp collar & i.d. rubber ringfor 100mm PVC, HDPE & copper pipe; or80mm PVC.


Typical Application

Structural Slab

Membrane

260

260

A

240

240

B62

83

C115

140

D

Vinyl Floor

28

28

E

E

Cement screed


AutoCAD SHX Text

S P S

AutoCAD SHX Text

DIMENSIONAL DATA


220mm Round Sheet Vinyl Floor DrainVari-Level Side-Outlet Lower Body

D

** EP150 extension piece available to increase max. height

Specification codes:LG150S4/C109 (polished 304 SS grate, CI lower body)LG150S6/C109 (satin 316 SS grate, CI lower body) *special order*Side outlet - "C109" = 100mm; "C89" = 80mm

SPS

E

Outside edge of Pipe

A

260

260100

80

N.B.

83240

240

B C

62

28140

115D* E

28


StructuralSlab

Membrane

Clamp ring

5.14

C N.B.

Cement Screed

Vinyl floor


220mmRound

Height-adjustable vinyl floorwaste assembly.

Drain body available in 304stainless steel. 316 stainlesssteel available by specialorder.

Grate & ring available inpolished 304 stainless steel.Satin 316 stainless steelavailable by special order.

CI Truflo 90° lower body with150mm reversible clampcollar & i.d. rubber ring for100mm PVC, HDPE &copper pipe; or 80mm PVC.


AB

SECTION 6 Basket Trap Floor Wastes

6.01

6.02

6.03

6.04

6.05

6.06

6.07

6.08

6.09

6.10

6.11

6.12

6.13

6.14

6.15

6.16

6.17

6.18

6.19

6.20

6.21

6.22

6.23

100mm Compact - Drop-in


135mm Vinyl - Push-in




200mm Square - Push-in 150


225mm Round - Push-in 150

220mm Vinyl - Push-in 150

150mm Round - Vari-level - Shallow Body

150mm Square - Vari-level - Shallow Body

155mm Vinyl - Vari-level - Shallow Body

200mm Square - Vari-level - Shallow Body

225mm Round - Vari-level - Shallow Body

200mm Square - Vari-level - Deep Body

225mm Round - Vari-level - Deep Body



220mm Vinyl - Vari-level - Deep Body

350mm Square - Special Custom-made

Coles-Spec. Basket Trap Floor Trough

150mm Square - Push-in - “Smart Secondary Strainer”


100

100

100

100

100

100

150

100

150

150

100

100

100

100

100

100

100

100

100

100

100

100

100

SPS 100mm Compact Basket Trap Assembly


Fixedsecondary

strainer4mm holes

Specification code:BA100S (304 stainless steel assembly)BA100SL (Shallow version, 100mm deep**)

Min. Depth 10mm

Tiling or Topping

180mm**

Ø97mm

6.01

Lift-out grate with mini-bayonetfitting.

Entire assembly in 304 stainlesssteel.

Includes removable basket andfixed secondary strainer.

Fits inside 100mm PVC, HDPE,CI and copper.

May be installed into a leakcontrol flange for waterproofedapplications.

(Drop-in)

Strainer BasketCode: SB753mm holes

Structuralslab

Ø112mm SPS

Typical Application

Cast in to slabTiled surface

100 N.B.

Typical Application

SPS 130mm Round Push-in Basket Trap


Standard PVC Pipe

I.D. Rubber ring seal

Min. height

Tiling or topping

20mm

Specification code:R130SR-BT (304 stainless steel)R130SR6-BT (316SS grate assembly) *special order*Shallow version: use suffix -BTS *special order*

6.02

Round grate in cast 304stainless steel. Basket andstrainer in 304 stainlesssteel sheet.

Spigot fits inside 100mmPVC, copper, CI andHDPE.

Includes stainless steelremovable basket and fixedsecondary strainer.

Compatible with PVC leakcontrol flanges forwaterproofed applications.

C.I> & HDPE pipeAlso suits copper,

Structural slab

SPS

* shallow version: 85mm deep

41mm

91mm

Strainer BasketCode: SBV85

3mm holes

Fixed secondarystrainer - 4mm holes

130mmRound

160mm*


Standard PVC Pipe

Min. height 25mm

Cement Screed

SPS 100mm Push-in Vinyl Floor Basket Trap

Structural Slab


Sheet VinylØ150mm (floor drain body)

6.03

Push-in basket trapassembly for sheet vinylflooring.

Vinyl floor drain bodyavailable 304 stainlesssteel.

Ring & grate availablepolished 304 (316 stainlesssteel *special order*).

O-rings adapt outlet to100mm PVC, copper,HDPE and CI pipe.

SPS

Specification code:V100SSA-BT (304 stainless steel)V100SSA-BTS (304SS shallow version *special order*)



3mm holes


Ø135mm

135mm Round Inlet

50mm

170mm*


Min. height30mm

Standard PVC Pipe




SPS 150mm Round Push-in Basket TrapSpecification code:R150SR-BT (304 stainless steel grate)R150SR-BTS (304SS shallow version) *special order*

Tiling or topping


185mm*

100 N.B.

HDPE pipes.

Structural Slab

6.04

Push-in grate assembly incast 304 stainless steel.316 stainless steelavailable by special order.


Includes stainless steelstrainer basket and fixedsecondary strainer.

Compatible with PVC leakcontrol flanges formembraned applications.

150mmRound


3mm holes


55mm

91mm* shallow version: 95mm deep

for 100mm pipe

AutoCAD SHX Text

SPS

Tiling or topping

Standard PVC Pipe

SPS 150mm Square Push-in Basket TrapSpecification code:Q150SR-BT (All-304 stainless steel)Q150SR6-BT (Grate assembly in 316SS)Shallow version: use suffix -BTS *special order*


100 N.B.


Push-in bucket trapassembly in 304 stainlesssteel. 316 stainless steelgrate assembly isnon-stock option.

Outlet fits inside 100mmPVC, copper, CI andHDPE.



Structural Slab


185mm*

150mmSquare

Min. height30mm

SPS


3mm holes



65mm

91mm

for 100mm pipe



Standard PVC Pipe

SPS 200mm Square Push-in Basket TrapSpecification code:Q200SR1-BT (304 stainless steel)Q200SR6-BT (grate assembly in heel-friendly 316SS)Shallow version: use suffix -BTS *special order*

30mm

Tiling or topping

Min. height

185mm*

100 N.B.


Structural Slab

6.06

Push-in grateassembly in 304stainless steel. 316stainless steel grateassembly available byspecial order.

Outlet fits inside100mm PVC, copper,CI and HDPE.

Includes stainlesssteel removablebasket and fixedsecondary strainer.

Compatible with PVCleak control flangesfor membranedapplications.

SPS



3mm holes


65mm

91mm

200mmSquare

Typical Application

Support BarsLoad Class CAS3996-2006

for 100mm pipe


Standard PVC Pipe

Structural Slab

SPS 200mm Square Push-in Basket TrapSpecification code:Q200/150SR-BT (316 stainless steel)

Min. Height30mm

Tiling or Topping

200mmSquare

110mm


150 N.B.

Fixed secondary strainer - 4mm holes

Typical Application

O.D. 146mm

Strainer BasketCode: SB150S

3mm holes Rubber ring seal

6.07

Push-in bucket trapassembly - 316stainless steel grateassembly.

Includes stainlesssteel removablebasket and fixedsecondary strainer.


Grate assemblyload-tested to Class Cof AS3996-2006.

for 150mm pipe


SPS

185mm*

SPS 225mm Round Push-in Bucket Trap



100mm PVC Pipe

Min. height

Tiling or Topping

30mm

100 N.B.

6.08


Structural Slab

Round grate in cast 316stainless steel. Basketand strainer in 304stainless steel sheet.

Outlet fits inside 100mmPVC, copper, CI andHDPE.

Includes stainless steelremovable basket andfixed secondary strainer.

Compatible with PVCleak control flanges formembranedapplications.

65mm

91mm



3mm holes

225mmRound

SPS

for 100mm pipe


Specification code:R225SR-BT (grate assembly in heel-friendly 316SS)Shallow version: use suffix -BTS *special order*

Standard PVC Pipe

Structural Slab

SPS 225mm Round Push-in Basket TrapSpecification code:R225/150SR-BT (316SS grate assembly)

Min. Height30mm

Tiling or Topping

118mm


150 N.B.

Typical Application

O.D. 146mm

Rubber ring seal

6.09

for 150mm pipe

225mmRound



3mm holes


Push-in bucket trapassembly - 316stainless steelheel-friendly grateassembly.

Includes stainless steelremovable basket andfixed secondarystrainer.


Grate assemblyload-tested to Class Cof AS3996-2006.

SPS

Min. height: 25mm

HDPE pipes.

Rubber ring seal


Ø240mm (floor drain body)

150mm NB


O.D. 146mmStandard PVC Pipe

Structural Slab

Vinyl floorClamp ring

Cementscreed

Push-in basket trapassembly for sheet vinyl.


Drain body available in 304stainless. 316 stainlesssteel available by specialorder.

Ring & Grate available inpolished 304 stainless steel.Satin 316 stainless steelavailable by special order.

SPS 220mm Sheet Vinyl Floor Basket Trappush into 150mm pipe

SPS

Specification codes:LG150SSA-BT (All-304 stainless steel)


220mmRound


3mm holes


118mm

6.10

** Use EP100extension piecefor additionalheight

Specification codes:R150SA (304 SS grate, CI retro-fit lower body)R150SSA (304 SS grate, 316 SS retro-fit lower body)R150SA2 (304 SS grate, C100A CI "deluxe" lower body)For 316SS grate add "6" eg "R150SA26"

SPS 150mm Round Vari-Level Basket Trap

95mm

Membrane

Optionalcouplingconnection

Ø235mm

100 N.B.110 O.D.

Fixed Secondary Strainer4mm holesOptional E100

PVC tailpiece

C100A CIlower body



6.11

(Shallow Body)



150mmRound

Typical Application

SPS

Height-adjustable bucket trapassembly with lift-out grate.

Grate assembly available in304 stainless steel. 316stainless non-stock option.

C100A CI "deluxe" lower bodywith reversible clamp collar(pictured).

Optional Q100Y2B CI retro-fitlower body fits inside 150mmØcore hole.


77mm


100 N.B.110 O.D.Ø235mm

C100A CIlower body

Optional E100PVC tailpiece

95mm


Fixed Secondary Strainer4mm holes

6.12



Membrane

SPS 150mm Square Vari-Level Basket Trap


150mmSquare

Typical Application

Specification codes:Q150SA (304 SS grate, CI retro-fit lower body)Q150SSA (304 SS grate, 316 SS retro-fit lower body)Q150SA2 (304 SS grate, C100A "deluxe" CI lower body)For 316SS grate, add "6" eg "Q150SA26"

Height-adjustable, hingedbasket trap assembly to suit100mm pipe.

Grate assembly available in 304or 316 stainless steel.


C100A CI "deluxe" lower bodywith reversible clamp collar(pictured).

Optional Q100Y2B CI retro-fitlower body fits inside 150mmØcore hole.


(Shallow Body)


77mm



SPS


Ø235mm

Optional E100PVC tailpiece



100 N.B.110 O.D.

95mm

C100A CIlower body

Cement screed


6.13



Membrane

Sheet Vinyl Floor

Clamp ring

155mm

175mm

(Shallow Body)SPS 155mm Round Vinyl Floor Bucket Trap

Height-adjustable basket trap for sheetvinyl floor to suit 100mm pipe.

Drain body available in 304 stainless asstandard or 316 stainless steel as anon-stock option.

Ring & Grate available in polished 304or 316 stainless steel.

Includes stainless steel removablebasket and fixed secondary strainer.

C100A CI "deluxe" lower body withreversible clamping collar.

Optional CI or SS retro fit lower bodyfits inside 150mmØ core hole.

Specification codes:LG100A-S (304 SS ring & grate & body, CI retro-fit body)LG100A-SS (304 SS ring grate & body, 316 SS retro-fit body)LG100SA2 (304 SS ring, grate & body, CI "deluxe" body)

Typical Application


77mm


AutoCAD SHX Text

S P S

Height adjustment:Min. 30mm

Max. 70mm**

Ø235mm


100 N.B.110 O.D.

Fixed Secondary Strainer4mm holesOptional

E100 PVCtailpiece

95mmC100A CIlower body

Tiling/Paving/ Topping


Typical Application

6.14



Membrane

SPS 200mm Square Vari-Level Basket Trap

200mmSquare SPS

Specification codes:Q200SA (304 SS grate, CI retro-fit lower body)Q200SSA (304 SS grate, 316 SS retro-fit lower body)Q200SA2 (304 SS grate, C100A CI "deluxe" lower body)For 316SS grate, add "6" eg "Q200SA26"

Height-adjustable, hingedbasket trap assembly to suit100mm pipe.

Grate assembly available in304 stainless steel; optional316 stainless steel.


C100A CI "deluxe" lowerbody with reversible clampcollar (pictured).

Optional CI or SS retro-fitlower body fits inside150mmØ core hole.

(Shallow Body)



77mm


Height adjustment:Min. 30mm

Max. 70mm** Typical Application

Ø235mm

** Use EP100extension piecefor additionalheight 100 N.B.

110 O.D.

OptionalE100 PVCtailpiece

95mmC100A CIlower body

Tiling or Topping




6.15


Membrane

SPS 225mm Round Vari-Level Basket Trap

225mmRound

SPS

Specification codes:R225SA (316 SS grate, CI retro-fit lower body)R225SSA (316 SS grate, 316 SS retro-fit lower body)R225SA2 (316 SS grate, C100A CI "deluxe" lower body) Height-adjustable bucket

trap assembly withhigh-heel friendly grate.

Grate assembly available in316 stainless steel.




(Shallow Body)



77mm

Specification code:Q200SA3 (304 SS grate CI deep body)Q200SSA3 (316 SS grate, 316 SS deep body)Q200SA3-S (304 SS grate, CI shallow body)Q200SSA3-S (316SS grate, 316SS shallow body)

SPS 200mm Square Basket Trap Assembly


** Use EP150 foradditional height

UNI-FIN connectorsuits 100mm PVCHDPE & Copper

Ø175mm

202mm

SecondaryStrainer

4mm holes

Membrane



6.16

StructuralSlab

(Deep Body)

Tiling or Topping

200mmSquare

Typical Application

Height-adjustable hingedbasket trap assembly.

Grate assembly available incast 304 or 316 stainlesssteel. Load tested to Class Cof AS3996-2006.

Q150/100Y deep basket bodyfits inside 175mmØ core holeand is available in CI(standard) or 316 stainlesssteel.

Q150/100YL shallow bodysaves 100mm in depth - usedfor thinner slabs or invert levelproblems. *suffix -S*

Secondary strainer affixedwith M5 security screws.


100mm N.B.

I.D. 79mm

Q150/100YLShallow body(102mm deep)

SPS

Ø175mm

202mm

Membrane


6.17

StructuralSlab

SPS 225mm Round Bucket Trap Assembly


Tiling or Topping

225mmRound

(Deep Body)


I.D. 79mm


100mm N.B.


Typical Application

Specification code:R225SA3 (304 SS grate CI deep body)R225SSA3 (316 SS grate, 316 SS deep body)R225SA3-S (304 SS grate, CI shallow body)R225SSA3-S (316SS grate, 316SS shallow body) Height-adjustable basket trap

assembly - heel-friendly finepattern.

Grate assembly available incast 316 stainless steel. Loadtested to Class C ofAS3996-2006.




SPS



SecondaryStrainer

4mm holes

Membrane

202mm

Tiling or Topping




Ø175mm

6.18

(Deep Body)


StructuralSlab

225mmSquare

I.D. 79mm


100mm N.B.


Height-adjustable hingedbucket trap assembly.

Grate assembly available incast 316 stainless steel. Loadtested to Class C ofAS3996-2006.




Specification code:Q225SA (316 SS grate CI deep body)Q200SSA3 (316 SS grate, 316 SS deep body)Q200SA3-S (3164 SS grate, CI shallow body)Q200SSA3-S (316SS grate, 316SS shallow body)



SecondaryStrainer

4mm holes

SPS



Specification code:Q300DA (galvanised ductile iron grate, CI lower body)Q300SA (304 SS grate, CI lower bodyQ300SSA (316 SS grate, 316 SS lower body)For shallow version add suffix "-S" to above codes

202mm


175Ø


Tiling / Topping

Membrane

StructuralSlab

6.19

(Deep Body)

300mmSquare SPS

Height-adjustable hingedbasket trap assembly.

Grate assembly availablein cast 316 stainless steel.Load tested to Class C ofAS3996-2006.

Q150/100Y deep basketbody fits inside 175mmØcore hole and is availablein CI (standard) or 316stainless steel.

Q150/100YL shallow bodysaves 100mm in depth -used for thinner slabs orinvert level problems.*suffix -S*


I.D. 79mm

100mm N.B. UNI-FIN connectorsuits 100mm PVCHDPE & Copper


Typical Application


SecondaryStrainer

4mm holes


Cement screed

Ø220mm

Membrane

Vinyl floor



202mm

SPS 220mm Sheet Vinyl Floor Basket Trap


Ø175mm

6.20

(Deep Body)

SPS

StructuralSlab

Clamp ring


I.D. 79mm

100mm N.B.



Height-adjustable basket trapassembly for sheet vinylflooring.

Grate assembly available incast 304 and 316 stainlesssteel.




Specification code:LG150A/S (304 SS grate assembly, CI deep body)LG150A/SSA (316 SS grate assembly, 316 SS deep body)LG150A/S-S (304 SS grate assembly, CI shallow body)LG150A/SSA-S (316SS grate assembly, 316SS shallow body)

Typical Application


SecondaryStrainer

4mm holes

Specification code:Q300BTA (300mm square full 304SS)Q350BTA (350mm square full 304SS)Q450BTA (450mm square full 304SS)

SPS Square Special Basket Trap

6.21

(Custom made)

350mmSquare

All-304 stainless steelbasket trap assembly.

Load rated to Class Cof AS3996.

Lift-out grate madefrom heavy-duty10x10mm square bar,with 10mm gaps.

5mm x 5mm wedgewire (high heelfriendly) gratingavailable as option.


Strainer basket

FixedSecondary

Strainer

100mmPVC orHDPE

Concreteties x 4

Structuralslab

Typical application

105mm

50mm

SPS Coles-Style Basket Trap Floor Trough

HEELGUARD slip resistant grating

Class 'C' loading

Removable basket and fixed secondarystrainer

Full 304-grade s/s construction[316-grade also available at extra cost]

Cross-break or built-in fall to outlet


75mm*

Outlet 89mm Ø x 100mm long.Fitted with removable strainer basketand fixed secondary strainer.

As required

As required

PLAN

FRONTELEVATION

75mm*

Pressedsafetyedge

133mm Overall

100mm C/O

5 5

20mm

SECTION

With Class "C" slip-resistant wedge wire gratingSpecification codes:BTT125C1 - standard wedge-wire gratingBTT125C2 - composite grating

6.22

Specification code:Q150SR-BTM (All-304 stainless steel)

With "Smart Secondary Strainer"*SPS 150mm Square Push-in Bucket Trap



Standard PVC Pipe

"Smart Secondary Strainer"

Strainer basket

Structural slab

30mmMin. height

Tiling or topping

150mmSquare

6.23

185mm

100 N.B.

Also suits copper, C.I.&HDPE pipes


Square grate in cast 304stainless steel. Basket andstrainer in 304 stainlesssteel sheet.


Secondary strainer plateactivates only whenstrainer basket is removed.


SPS

AutoCAD SHX Text

AUS NZ & US PATENT

SECTION 7 Cleanouts - Inspection Points - Boundary Traps

7.01

7.02

7.03

7.04

7.05

7.06

7.07

7.08

7.09

7.10

7.11

7.12

7.13

7.14

7.15






135mm Vinyl - Push-in – Special Plug Insert



125mm Vinyl - Vari-level

155mm Vinyl - Vari-level

200mm Round - Push-in 150 (Boundary Trap)

220mm Vinyl - Push-in 150

220mm Vinyl - vari-level - for sheet vinyl floor

150mm Square - Push-in – Special Trap Screw

150 & 200mm Square Inspection Covers


100

100

100

80

100

100

100

100

100

100

150

150

150 (or 100)

100

100


130mmRound

Standard PVC Pipe

SPS 130mm Round Push-in CleanoutSpecification codes:R130SCR4 (Polished 304 stainless steel)R130SCR6 (Satin 316 stainless steel)R130SCRN6 (Non-slip 316 stainless steel)For security screws, use suffix /SEC

Structural Slab

Min. height

Tiling or topping

20mm

100 N.B.

Typical Application



Cast into slab

SPS

Light-dutycleanout in cast304 and 316stainless steel.

Gas-tight lid.

Security screwsalso available.

7.01

100mm outlet

I.D. 87mm

O.D. 97mm

Optional security screws (use suffix "/SEC")

Typical Application

100 N.B.

SPS 150mm Round Push-in Cleanout

150mmRound

Tiling or topping

Standard PVC Pipe

20mmMin. height

Structural Slab

Specification codes:R150SCR (Satin 316 stainless steel)

SPS

7.02



100mm Outlet

Heavy-dutycleanout in cast316 stainlesssteel.


Cast into slab

Optional security screws

I.D. 88mm

O.D. 97mm


100mm Outlet



SPS 130mm Square Push-in Cleanout


Min. height

Structural Slab.

Standard PVC Pipe

20mm

Typical Application

100 N.B.

HDPE pipes.

130mmSquare

SPS

7.03

Cast into slabTiling or topping

Light-dutycleanout in cast304 and 316stainless steel.

Gas-tight lid.


Specification codes:Q130SCR4 (Polished 304 stainless steel)Q130SCRN6 (Non-slip 316 stainless steel)For security screws, use suffix /SEC

Optional tamper-proof screws (use suffix "/SEC")

O.D. 97mm

I.D. 87mm

Specification codes:VH80SPA (304 stainless steel ring & grate, ABS body)V80SPA (All-304 stainless steel assembly)For bead-blast (slip resistant) finish, use suffix -N

SPS 80mm Push-in Sheet Vinyl Floor Cleanout

Ø130mm

7.04

28mm

53mmI.D. 64mm

O.D. 72mm

80mm Pipe

117mm

Typical ApplicationSheet Vinyl

Cement Screed

Structural Slab

SPS

Push-in cleanoutassembly for sheetvinyl flooring.

Vinyl floor drain bodyavailable in ABS and304. 316SS bodyavailable by specialorder.

Ring & grate availablein polished 304, whichcan be bead-blastedfor slip-resistant finish.

O-rings adapt outlet to80mm PVC & copperpipe.


7.05

Ø150mm

50mm

I.D. 88mm

O.D. 97mm

25mm

Specification codes:V100SPA (304SS body, polished 304 SS ring & lid)V100SPNA (304SS body, non-slip 304 SS ring & lid)For 316SS tops, add "6" to the above codesFor ABS plastic body, use "VH" instead of "V"

135mm

Cleanout (New Compact Top Model)SPS 100mm Push-in Sheet Vinyl Floor

Structural Slab

Cement Screed

Sheet Vinyl

Push-in floor cleanoutassembly for sheetvinyl flooring.

Drain body available in304 stainless steel -ABS and 316 stainlesssteel options.

Vinyl clamp ring & lidavailable in polishedand non-slip 304stainless steel. 316stainless steelnon-stock option.

O-rings adapt outlet to100mm PVC, copper,HDPE and CI pipe.

Rubber Plug (optional)

Typical Application

100mm Pipe

Optional security screws


AutoCAD SHX Text

SPS

7.06

Ø150mm

50mm

I.D. 88mm

O.D. 97mm

25mm

Specification codes:V100SP26A (316SS body, satin 316 SS ring & lid)For ABS plastic body, use "VH" instead of "V"

135mm

Cleanout (special "plug insert" version)SPS 100mm Push-in Sheet Vinyl Floor

Structural Slab

Cement Screed

Sheet Vinyl

Push-in floor cleanoutassembly for sheetvinyl flooring.

Drain body available in316 stainless steel orABS plastic. Vinylclamp ring & lidavailable in polished orsatin 316 stainlesssteel.

Cleanout insert sealsinto clamp ring withinternal o-ring seal.

O-rings adapt spigot to100mm PVC, copper,HDPE and CI pipe.

Typical Application

100mm Pipe

Internal o-ring seal

Lever point forplug removal


Removal of fixingscrews for cleanlinessin lab environments

AutoCAD SHX Text

SPS

100mm Outlet

65mm

Light-duty cleanoutassembly made from 316stainless steel. 304stainless steel non-stockoption.

Satin finish standard withoptional special non-slipfinish (concentric ridges).

C100A CI "deluxe" lowerbody with reversibleclamp collar (pictured).

Optional Q100Y CIretro-fit lower body fitsinside 150mmØ corehole.

SPS 130mm Round Vari-Level Cleanout

Optionalcoupling

connection


95mm

Specification codes:R130SC/Q (316 SS cleanout, Q100Y retro-fit lower body)R130SC/C (316 SS grate, C100A CI "deluxe" lower body)For non-slip finish, add suffix "N" eg "R130SPN/C"


40

30


Push-inconnection

(specify: -R)

100mm N.B.

Typical Application



Membrane

130mmRound

SPS

7.07


77mm


100mm Outlet

65mm

Cleanout assembly madefrom 304 stainless steel.316 stainless steelnon-stock option.

Satin finish standard withoptional non-slip finish(concentric ridges).

C100A CI "deluxe" lowerbody with reversibleclamp collar (pictured).

Optional CI retro-fit lowerbody fits inside 150mmØcore hole.

SPS 150mm Round Vari-Level Cleanout

150mmRound


Optionalcoupling

connection

95mm


30

40

Height adjustment:Min. 25mmMax. 60mm** Typical Application

100mm N.B.

Push-inconnection

(specify: -R)



Membrane

SPS

7.08

Specification codes:R150SC/Q (304 SS cleanout, Q100Y retro-fit lower body)R150SC/C (304 SS grate, C100A CI "deluxe" lower body)For non-slip finish*, add suffix "N" eg "R150SPN/C"*316SS and non-slip finish both available by special order



77mm


95mm


piece

Specification codes:LG810SP4/C (304 SS vinyl floor cleanout, CI lower body)LG810SP6/C (316 SS top, 304 SS drain body, CI lower body)* for retro-fit body use "/Q" instead of "/C"

Clamping ring


65mm

235Ø

Push-inconnection

(specify: -R)

100mm N.B.

Optionalcoupling

connection

30

40

Typical Application

Cement screed

7.09


Height-adjustable vinylfloor cleanout assembly.

Vinyl floor body available in 304 stainless steel;316 stainless steelavailable by special order.

Ring & cover available inpolished 304 stainless steel;316 stainless steelavailable by special order.

C100A CI "deluxe" lowerbody with reversible clampingcollar ("/C").

Q100Y optional CI retro fitlower body fits inside150mmØ core hole ("/Q").

77mm


Ø87

Ø125

Vinyl Sheet


SPS 100mm Ultra Compact Vari-LevelSheet Vinyl Floor Cleanout - Ø125mm Inlet

Drain body OD142mm

SPS



Clamping ring

Sheet Vinyl Floor

65mm

(Vari-Level)

Ø178mm

Ø155mm

SPS 155mm Round Sheet Vinyl Floor Cleanout


95mm


piece

Specification codes:LG100SP4/C (Polished 304SS top & drain body, CI lower body)LG100SP6/C (Satin 316SS top, 304SS drain body, CI lower body)For retro-fit body use suffix "/Q"

Height-adjustable vinyl floor cleanoutassembly.

Drain body available in 304 stainless steel.316 stainless steel available by specialorder.

Top available in polished 304 stainlesssteel. Satin 316 stainless steel available byspecial order.

C100A CI "deluxe" lower body withreversible clamping collar ("/C").

Optional CI retro fit lower body fits inside150mmØ core hole ("/Q").

100mm N.B.

Typical Application

Optionalcoupling

connection

30

40

Cement screed

Push-inconnection

(specify: -R)

7.10

Membrane


77mm


AutoCAD SHX Text

S P S

Standard PVC Pipe

Specification codes:R200/150SCR4 (Polished 304 stainless steel)R200/150SCR (Satin 316 stainless steel) *SPECIAL*R200/150SCRN (Non-slip 316 stainless steel)

Rubber ring seal

SPS 200mm Round Push-in Cleanout

Min. height: 25mm

Tiling or topping

200mmRound

7.11

150mm NB

I.D. 138mm

O.D. 146mm

Typical Application


Structural Slab

Heavy-duty cleanoutin cast 304SS andnon-slip 316SS.Satin 316SSavailable by specialorder.

Security screws alsoavailable.

SPS

(150mm outlet)

Optional security screws (use suffix "/SEC")


Cast into slab

(150mm Push-in)

Push-in floor cleanoutassembly for sheet vinyl.

Drain body available in304 stainless steel; 316stainless steel non-stockoption.

Lid available in polishedor non-slip 304 stainlesssteel. 316 stainless steelnon-stock option.

SPS 220mm Sheet Vinyl Floor Cleanout

Structural Slab

Standard PVC Pipe

240mm

Specification codes:LG150SPA (Polished 304 stainless steel top)LG150SPNA (Non-slip 304 stainless steel top)For 316 stainless steel, add "6" eg "LG150SPNA6"

Ø220

Min. height: 25mm

Vinyl floor

150mm NB

O.D. 146mm

I.D. 138mm


Clamp ring

HDPE pipes.

Rubber ring seal


Cementscreed

SPS


(Vari-Level)150mm Outlet

or 100mm Outlet

Vinyl floor



98mm

Height-adjustable vinylfloor cleanout assembly.

Drain body available in304 stainless steel. 316stainless steel availableby special order.

Lid available in polishedor non-slip 304 stainlesssteel. 316 stainless steelavailable by special order.

150 or 100mm "Truflo" CIlower body with 150mmclamp collar.

SPS 220/150mm Sheet Vinyl Floor Cleanout



86mm

Specification codes:LG150SP/C150 (Polished 304 Stainless steel)LG150SPN/C150 (Non-slip 304 stainless steel)- includes cast iron "Truflo" lower body assembly* for 316 stainless steel use suffix "6" eg "LG150SP6/C150"* for 100mm outlet, use suffix "C100" instead of "C150"

SPSØ220

Typical Application

150 or 100 N.B.


Membrane

150mm outlet shownwith optional tailpiece

connector

Structural

Clamp ring

Slab


100mm Outlet

Push-in trap screw /inspection openingavailable in 304stainless steel. 316stainless steelnon-stock option.



SPS 150mm Square Special Trap Screw


3mm thick Vinyl Tiling...

Structural Slab.

Specification code:Q150IOS (304 stainless steel - slip resistant finish)

Standard PVC Pipe

Typical Application

100 N.B.

HDPE pipes.

150mmSquare

7.14

3mm thick platecompatible with 3mmvinyl tiling commonlyused insupermarkets.

... or topping

SPS

4 x countersunk holes as standard

Inspection openingcover available in304 stainless steel.316 stainless steelnon-stock option.



3mm thick Vinyl Tiling...

Structural Slab.

Specification code:IO150S (304 stainless steel)IO200S (304 stainless steel)

Standard PVC Pipe

Typical Application

100 N.B.

HDPE pipes.

150mmor

200mmSquare

7.15

3mm thick platecompatible with 3mmvinyl tiling commonlyused insupermarkets.

... or topping

4 x countersunk holes as standard

SPS 150mm & 200mm Square Inspection Cover

SECTION 8 Security Floor Drains

8.01

8.02

8.03

8.04

8.05

8.06

8.07

8.08

8.09

8.10

8.11







120mm Round - Vari-level - Anti-ligature

120mm Round - Vari-level - 90° Outlet - Anti-ligature

125mm Vinyl - Vari-level - Anti-ligature

125mm Vinyl - Vari-level - 90° Outlet - Anti-ligature

125mm Vinyl - Integral Puddle Flange - Anti-ligature


100

100

100

100

100

100

100

50 / 65

100

50 / 65

100

With topping/tiling

Structural Slab

Min. height

Standard PVC Pipe

Tiling or topping

Specification code:R130SHR4 (satin 304 stainless steel)316SS available by special order

SPS 130mm Round Push-in Prison Drain



20mm

Cast into slab


Structural Slab

100 N.B.


8.01

100mm Outlet

130mm round grate with 6mm holes and"hex-head" or "torx" security screws

SPS

I.D. 87mm

O.D. 97mm

Floor waste includessecurity screws and6mm holes forimprovedtamper-resistance.

Grate assemblyavailable in 304stainless steel. 316stainless steelavailable by specialorder.

Pushes into 100mmPVC, copper, HDPEor cast iron.

(100mm Push-in)

Floor waste includesspecial tamper-resistantfeatures for prisons andsafe cells.

Grate assembly availablein 304 stainless steel.

Pushes into 100mm PVC,copper, HDPE or castiron.

SPS 150mm Round Prison / Safe Cell DrainSpecification code:R150SHR4 (satin 304 stainless steel)

Standard PVC Pipe

150mm roundgrate with 6mm

holes and"hex-head" or"torx" security

screws

Structural Slab.

Min. height30mm

Tiling or topping

100 N.B.

Typical Application




8.03

O.D. 97mm

I.D. 88mm

150mm

135mm

50mm


Grate features securityscrews and 5mmholes.

O-rings adapt spigot to100mm PVC, copper,HDPE and CI pipe.

100mm Pipe

Typical Application

25mmCement Screed

Sheet Vinyl

Structural Slab

(Compact Security/Prison Model)SPS 100mm Push-in Sheet Vinyl Floor Waste

135mm

150mm

Specification codes:VH100SHA (ABS body, 304 stainless steel top)V100SSHA4 (Assembly in 304 stainless steel)


AutoCAD SHX Text

SPS

AutoCAD SHX Text

SPS


30


50

Specification codes:R130SH4/E (304SS grate with PVC adapter *not shown*)R130SH/Q (304SS grate, Q100Y2B retro-fit lower body)R130SH/C (304SS grate, C100A CI "deluxe" lower body)

SPS 130mm Round Prison / Safe Cell Drain



235Ø

65mm

Push-inconnection

(specify: -R)

100mm N.B.

Optionalcoupling

connection

95mm

Typical Application

8.04

Membrane

Floor waste includessecurity screws and 6mmholes for improvedtamper-resistance.

Grate assembly availablein 304 stainless steel.316SS available by specialrequest.


Optional Q100Y2B CIretro-fit lower body fitsinside 150mmØ core hole.

(Vari-Level)

SPS


holes andtemper-resistant

screws



77mm

Specification codes:R150SH/E (304 SS grate with PVC adapter *Not shown*)R150SH/Q (304 SS grate, CI retro-fit lower body)R150SH/SQ (304 SS grate, SS retro-fit lower body)R150SH/C (304 SS grate, C100A CI "deluxe" lower body)



SPS 150mm Round Prison / Safe Cell Drain

Typical Application


235Ø


Ø145

Optionalretro-fit

lower body 95

65mm

100mm N.B.

Push-inconnection

(specify: -R)Optionalcoupling

connection40

30

95mm

8.05


Membrane

100mm outlet


holes andtemper-resistant

screws

* SPECIAL ORDER PRODUCT * Floor waste includes specialtamper-resistant features forprisons and safe cells.

Grate assembly available in304 stainless steel.



(Vari-Level)

8.06

95

65mm

SPS 100mm Sheet Vinyl Prison Floor Waste


235Ø

95mm

Cement screed

Optionalcoupling

connection

Height-adjustable vinyl floor waste assembly.

High-security features: 7mm holes andtamper-resistant screws.

Drain body available in bronze or316 stainless steel.

Ring & Grate available in 304 grade stainlesssteel. 316 stainless steel non-stock option.

C100A CI "deluxe" lower body with reversibleclamping collar.

Specification codes:

LG100SH/C (304 stainless steel floor waste, CI lower body)for retro-fit lower body, use "/Q" instead of "/C"


piece

30

50


Push-inconnection

(specify: -R)

100mm N.B.

Typical Application


Ø145

Optionalretro-fit

lower body

Clamping ring

Sheet Vinyl Floor

Membrane

(Vari-Level)LG100SH/E (304 SS grate with PVC adapter *Not shown*)

AutoCAD SHX Text

DIMENSION IN MILLIMETRES

AutoCAD SHX Text

DIMENSIONAL DATA (mm)

AutoCAD SHX Text

NOMINAL

AutoCAD SHX Text

OUTLET

AutoCAD SHX Text

DIAMETER

AutoCAD SHX Text

100

AutoCAD SHX Text

175 155

AutoCAD SHX Text

%%CA

AutoCAD SHX Text

%%CB

AutoCAD SHX Text

A

AutoCAD SHX Text

B

Specification codes:R120S-ACR/E (304 SS grate with PVC adapter *Not shown*)R120S-ACR/C (with C100A cast iron "deluxe" lower body)R120S-ACR/Q (with Q100Y2B cast iron retro-fit body)


SPS 120mm Round Prison Floor Waste

95mm


piece

Membrane


235Ø

65mm

Push-inconnection

(specify: -R)

100mm N.B.

Optionalcoupling

connection50

30

5mm slots

Topping / Tiling

Concealed waterway

8.07

Heavy-duty, long-lastingall-304 stainless steel floorwaste assembly.

New "Anti-Crocodile-Roll"features, includingconcealed waterways withno anchor points.

Includes "Pin-Hex" stylesecurity screws. Otherversions optional, including"Torx" and "Snake-eye"style.


Q100Y2B retro-fit lowerbody for in-slab leak control

(100mm Vari-Level)

Typical Application

120mmRound



77mm

"ACR"

Topping or Tiling

Structural Slab

'A'

SPS R120mm Round "ACR" Side Outlet PrisonSpecification codes:R120S-ACR4/C90 (Satin 304 stainless steel)Includes Q165/90Y 65/50mm CI side outlet lower body

Min. height 25mm

N.B

DCB

10095

6550

1518

200200

180180

'D'

Spigot pushes into 65mm PVC or copper with o-ring connection,or connects to 50mm PVC/HDPE with no-hub coupling.

'C'

AN.B.

8.08

'B'

(100x65/50mm)

Heavy-duty, long-lasting all304 stainless steel floorwaste assembly.

New "Anti-Crocodile-Roll"features, includingconcealed waterway and noanchor points.

Several types of securityscrew are available,including "torx" style and"snake-eye" style.

Q165/90Y cast iron sideoutlet lower body connectsto 65mm and 50mm pipe.


120mmRound

Floor Waste

5mm slots

Concealed waterway

Dimensions (mm)


Specification codes:LG810SSA-ACR4/E (304 SS grate with PVC adapter *Not shown*)LG810SSA-ACR4/C (with C100A "deluxe" CI lower body)LG810SSA-ACR4/Q (with Q100Y2B retro-fit CI lower body)

Typical Application

Heavy-duty, long-lasting all304 stainless steel vinylfloor waste assembly.




Q100Y2B retro-fit lowerbody for in-slab leak control

Vinyl Floor Waste (100mm Vari-Level)


SPS 100mm "ACR" Ultra Compact Prison

Drain body OD142mm


95mm

50


piece

30

65mm


Optionalcoupling

connection 100mm N.B.

Push-inconnection

(specify: -R)


77mm

Cement screed

Min. height 18mm

Concealed waterway

125mm

5mm slotSheet Vinyl Floor

8.09

Structural Slab

'A'

SPS 100mm "ACR" "Ultra Compact"

Specification codes:LG810SSA-ACR4/C90 (Satin 304 stainless steel)Includes Q165/90Y 65/50mm CI side outlet lower body

Min. height 18mm

N.B

DCB

10095

6550

1518

200200

180180

'D'

Spigot pushes into 65mm PVC or copper with o-ring connection,or connects to 50mm PVC/HDPE with no-hub coupling.

'C'

AN.B.

8.10

'B'

(100x65/50mm)

Heavy-duty, long-lasting all304 stainless steel floorwaste assembly.



Q165/90Y cast iron sideoutlet lower body connectsto 65mm and 50mm pipe.


Prison Vinyl Floor Waste Side Outlet

Dimensions (mm)


Concealed waterway

125mm

5mm slotSheet Vinyl Floor

Drain body OD142mm

Standard PVC Pipe

Structural Slab

Min. Height 20mm

SPS 100mm Retro-fit Puddle Flangewith Slip-in "ACR" Prison Vinyl Floor Waste

Specification code:LG87SVA-ACR4/PF (ABS body, Satin 304SS top)Includes PF100 lo-profile puddle flange

Screed

Flange OD180mm


Waterproof membrane





Typical Application

I.D. 81mm


125mm

100mm N.B.

Concealed waterway

HDPE pipes.

8.11


Lo-profile vinyl floorwaste slips inside I.D. offlange. 1mm spacer finsprovides adequate leakcontrol.

Satin 304-grade stainlesssteel ring and grate.

"ACR" security featuresinclude concealedwaterway and "hex-head"security screws.

Drain body OD142mm

SECTION 9 Specials & Miscellaneous

9.01

9.02

9.03

9.04

9.05

9.06

9.07

9.08

9.09

9.10

9.11

100mm Drop-in Balcony Drains

Retro-fit Membrane Flange with Flat or Dome Grate

Special 90° Balcony Drain with Flat or Dome Grate

200mm Square Downpipe Drain - Push-in

200mm Square Downpipe Drain - Vari-level

225mm Round Downpipe Drain - Vari-level

225mm Square Downpipe Drain - Vari-level

100mm Truflo RWO – recessed flat grate for under downpipes

The Balcony Box

Custom Stainless Steel Grate & Trough - Standard

Custom Stainless Steel Grate & Trough - Vinyl Clamp


65

100

50 / 65

100

100 (or 150)

100 (or 150)

150

100 & 150

100

100

100

Round or square grate availablein 316 stainless steel. 304stainless steel non-stock option.

50mm spigot drops inside 65mmpipe after liquid membrane hasbeen applied into pipe.

To be employed only with theapproval of the waterproofingcontractor.

Extra precautions must beemployed to prevent tile bedding /grout from blocking the outlet.

120 Min.

SPS 100x50mm Special Drop-in Balcony Drain

Min. Height 20mm

Membrane

Specification codes:R100S2 (Round 316 stainless steel grate)Q100S2 (Square 316 stainless steel grate)

Ø65mm PVCor copper bend

Typical Application

Structural Slab

100mmRound

SPS

Tiling or Topping

100mmSquare

SPS

9.01Tel: (02) 9417 1900 Fax: (02) 9417 0108 E-mail: [email protected] Plumbing Supplies Pty Ltd


Standard PVC Pipe

Structural Slab

Clamping flange 190mm O.D.

9.02


100mm N.B.

HDPE pipes.

Typical Application


Membrane

Domed grate 155mm O.D.

Weep slots x 3

SPS

20mm

SPS 100mm Retro-fit Dome/Flat Grate & FlangeSpecification code:

RC100AD (304 s/s flange, aluminium domeRC100AF (304 s/s flange, aluminium flat grate

65/50mm outlet

Membrane

'B'

N.B

SPS Special Dome/Flat 90° Balcony Drain

Timber Decking / Suspended Paver System

'A'

Typical Application

'D''C'

Spigot pushes into 65mm PVC or copper with o-ring connection, orconnects to 50mm PVC/HDPE with no-hub coupling.

Structural Slab

Weep Holes3 x places

Special flat or domegrate adapts to sideoutlet balcony drainbody.

Suitable forwaterproofed balconies /podia with timberdecking or suspendedpaver systems.

9.03Tel: (02) 9417 1900 Fax: (02) 9417 0108 E-mail: [email protected] Plumbing Supplies Pty Ltd

SPS

10510050

65

N.B.4037

A B180180

C200200

D

Specification code:C50/90AD (ABS lower body, LM6 aluminium dome)C50/90AF (ABS lower body, LM6 aluminium flat grate)

20mm

Specification code:Q200SRDP (satin 316 stainless steel) *Nonstock optionQ200SRDP4 (polished 304 stainless steel)



I.D. rubber ringseals to suit

100mm PVC,HDPE & copper


100 N.B.

30mm

Standard PVC Pipe

Structural Slab

Tiling or topping

Min. height


Structural Slab

100mm Outlet


200mmSquare


**Downpipe Version**

Ø120mmHole

** Suitable forLOW-FLOW

applications only

**SPS Recommends theHI-FLOW versionQ200/150SDP4

9.04


Specification code:Q200SDP4/C100 (Polished 304 SS grate assembly, CI lower body)Q200SDP6/C100 (Satin 316 SS grate & frame ass'y, CI lower body)For 150mm outlet, use suffix "C150" not "C100"

SPS 200mm Square Downpipe Drain

98mm





connector


150 or 100 N.B.

Structural

Membrane

Slab

Downpipe

9.05

100mm Outlet 150mm Outlet


Grate assembly features120Ø hole to allowinsertion of 110mmdownpipe.

Double-hinge design forease of access andmaintenance.

Available in 304 or 316stainless steel.

100mm or 150mm TrufloCI lower body with150mm reversible clampcollar.

Specification code:R225SDP4/C100 (Polished 304 SS grate assembly, CI lower body)R225SDP6/C100 (Satin 316 SS grate & frame ass'y, CI lower body)For 150mm outlet, use suffix "C150" not "C100"

SPS 225mm Round Special Downpipe Drain

Structural


connector


Membrane


98mm




150 or 100 N.B.

Downpipe

Slab

9.06



Grate assembly features120Ø hole to allowinsertion of 110mmdownpipe.

Available in 304. Note 316is available on request.


120mmHole

225mmRound


Specification code:Q225SDP4/C150 (Polished 304 SS grate assembly, CI lower body)Q225SDP6/C150 (Satin 316 SS grate & frame ass'y, CI lower body)For 100mm outlet, use suffix /C100*316SS version is SPECIAL ORDER*

SPS 225mm Square Special Downpipe Drain

98mm




connector


150 or 100 N.B.

Structural

Membrane

Slab

150mm outletor 100mm outlet


Grate assembly features170mmØ hole to allowinsertion of 160mmdownpipe.

Double-hinge design forease of access andmaintenance.

Available in 304 stainlesssteel; 316 stainless steelavailable by special order.


Downpipe (max O.D. 160mm)

225mmSquare

Ø170mm


Flat grate in LM-6aluminium

75mm

Optional concretesurround (by others)

Specification codes:T3150/100FE (Aluminium grate, galvanised CI body, 100mm outlet)T3150FE (Aluminium grate, galvanised CI body, 150mm outlet)

SPS 100 & 150mm Truflo SpecialDownpipe Discharge Drain


HD stainless steelfixing screws (x2)

40mm

100mm PVCspigotadapter

110mm ØDownpipe(by others)

N.B

Grate recessed 16mm inside body

150mm PVCspigotadapter

9.08

Suggested application:Rainwater inlet to beinstalled beneath thedownpipes.

S P S

Typical Application

250mmØ Body madefrom hot-dipped

galvanised cast iron

SPS 100mm Dual Inlet Balcony BoxSpecification codes:BB100 (injection-moulded uPVC plastic)

Speciality Plumbing Supplies Pty LtdTel: (02) 9417 1900 Fax: (02) 9417 0108 Email: [email protected]

100mm

160m

m

380mm

80mm

Standard 100mm Socket Outlet

100mm Downpipe(hole cut on-site)

100mm Floor waste (hole cut on-site)

Typical Application

Structural Slab

Tiling / Topping

Downpipe and floor waste inlets cuton site to fit as needed

Membrane

151mm

151mm

Weep holes cut on site by installer

100mm N.B.

9.09

SPS S/S Custom size grate & trough

· Available with standard outlet or dual strainer basket trap

· HEELGUARD 304 s/s grating -3mm wedgwire x 5mm gap

· Load Class 'B' under AS3996

· Dimpled non slip 316 s/swedgewire available at extra cost

· Full 304-grade s/s construction

· 316-grade also available at extracost

· Cross-break to outlet standard


As required

Outlet 88.9mm Ø

As required

As required

PLAN

FRONT ELEVATION

As required

Pressedsafetyedge

As required

As required

3mm 5mm

Various

Deeper applications

With S/S wedge wire gratingSpecification codes:SSTCUST - standard wedge-wire grating and channel

3mm 5mm

Shallow applications

As requireed

As required

9.10

HEELGUARD slip resistant grating

Class 'B' loading rating to AS3996-2006Higher load ratings available on request

Removable dual strainer basket trap orstandard outlet available

Full 304-grade s/s construction. 316 s/savailable on request

Cross-break to outlet or fall to outletavailable


As required

Outlet 89mm Ø x 100mm longDual strainer basket trap

As required

As required

FRONT ELEVATION

5mm

Grate Section

Vinyl clamp edge

Trough Section

Cross break

As requiredVarious

Nut serts @ 300 cntrs

27mm

150mm 300mm

Vinyl clampfixings

27mm

As required

SPS S/S Custom grate & trough with wedge wire grate - vinyl clamp edge

3mm

Specification codes:SSTVCUST - standard wedge-wire grating

9.11

Appendix

Association of Hydraulic Services Consultants Australia Research Foundation

Outlet Performance Certificate - Revision 1: 1 Authorised by Dr Terry Lucke 16-11-2016 2

Flow Characteristic Curve TIA100F

Weir Flow 7 L/s (30mm)

Observation Comments: Flow rates from 0-7.0 L/s (30mm Head) produced a linear characteristic curve with stable water

head levels. At 8.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 10mm. At 10.0 14.0 L/s the flow surcharged with the water head fluctuating 30mm. The maximum flow limit to maintain weir flow conditions is 7.0 L/s.

I hereby certify that the test results presented on this outlet performance certificate are true and correct and were obtained using recognised AHSCA Gutter Outlet Testing procedures. Dr Terry Lucke, Chief Researcher: Date: 16th November 2016

Mark Alexander, AHSCA Foundation Chairman:

Date: 16th November 2016



Flow Characteristic Curve TIA150F

Weir Flow 6.0 L/s (35mm) Orifice flow 10 L/s (40mm)


head levels At 8.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow At 10.0 14.0 L/s the flow surcharged characterised by the water level fluctuating 10 20 mm. The maximum flow limit to maintain weir flow conditions is 6.0 L/s.




0

10

20

30

40

50

60

70

80

0 2 4 6 8 10 12 14

Wat

er H

ead

Leve

l (m

m)

Flow Rate (L/s)

TRANSITION FLOW REGIONPlease note that the water depth levels in this

shaded area of the chart were observed to fluctuate continuously between maximum and minimum levels due to the transition between weir and orifice flow conditions occurring at

the outlet. Only the maximum observed water levels are plotted on this

chart.



Flow Characteristic Curve TIA100F2


Surcharged flow 12 L/s (90mm)

Observation Comments: Flow rates from 0-8.0 L/s (30mm Head) produced a linear characteristic curve with the exception

of open outlet which increased water head level rapidly at 6.0 L/s. At 10.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 20mm. At 12.0 14.0 L/s the flow surcharged with the water head fluctuating 40mm. The maximum flow limit to maintain weir flow conditions is 8.0 L/s.






Flow Characteristic Curve TIA150F2


Surcharged Flow 10 L/s (40mm)


head levels. At 8.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow. At 10.0 14.0 L/s the flow surcharged characterised by the water level fluctuating 10 - 20mm. The maximum flow limit to maintain weir flow conditions is 6.0 L/s.






Flow Characteristic Curve TIA100D2


Surcharged Flow >12 L/s

Observation Comments: Flow rates from 0-8.0 L/s (37mm Head) produced a linear characteristic curve with the exception

of open outlet which increased water head level rapidly at 8.0 L/s. At 10.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 20mm. Above 12.0L/s the flow surcharged. The maximum flow limit to maintain weir flow conditions is 8.0 L/s.

I hereby certify that the test results presented on this outlet performance certificate are true and correct and were obtained using recognised AHSCA Gutter Outlet Testing procedures. Dr Terry Lucke, Chief Researcher: Date: 7th June 2017


Date: 7th June 2017



Flow Characteristic Curve TIA150D2




head levels. At 10.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow. At 10.0 14.0 L/s the flow surcharged characterised by the water level fluctuating 10 - 20mm. The maximum flow limit to maintain weir flow conditions is 8.0 L/s.






Flow Characteristic Curve TIA80/90F

Weir Flow 1.5 L/s (6mm)


Observation Comments: Flow rates from 0-1.5 L/s (6mm Head) produced a flat characteristic curve with stable water head

levels. At 2.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow. At 3.0 4.0 L/s the flow surcharged with the water head rising rapidly to 90mm. The maximum flow limit to maintain weir flow conditions is 1.5 L/s.






Flow Characteristic Curve TIA100/90F



Observation Comments: Flow rates from 2.0-3.0 L/s (15mm Head) produced a flat characteristic curve with stable water

head levels. At 4.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow. At 5.0 7.0 L/s the flow surcharged with the water head rising rapidly to 100mm. The maximum flow limit to maintain weir flow conditions is 3.0 L/s.






Flow Characteristic Curve TIA80/90F2










Flow Characteristic Curve TIA100/90F2


Vortex/surcharged flow 4 L/s (20mm)








Flow Characteristic Curve TIA80/90D2










Flow Characteristic Curve TIA100/90D2










Flow Characteristic Curve SIA150F



Observation Comments: Flow rates from 0-10.0 L/s (25mm Head) produced a flat characteristic curve with stable water

head levels. At 12.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged

flow, then choking btween 14.0-20.0 L/s and the water head rising to 50mm. The maximum flow limit to maintain weir flow conditions is 10.0 L/s.

I hereby certify that the test results presented on this outlet performance certificate are true and correct and were obtained using recognised AHSCA Gutter Outlet Testing procedures. Dr Terry Lucke, Chief Researcher: Date: 24th January 2017


Date: 24th January 2017



Flow Characteristic Curve SIA150D2


Surcharged Flow - 20 L/s (40mm)

Observation Comments: Flow rates from 0-18.0 L/s (42mm Head) produced a flat characteristic curve with stable water

head levels. At 20.0 22.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged

flow. The maximum flow limit to maintain weir flow conditions is 18.0 L/s.

I hereby certify that the test results presented on this outlet performance certificate are true and correct and were obtained using recognised AHSCA Gutter Outlet Testing procedures. Dr Terry Lucke, Chief Researcher: Date: 17th January 2017


Date: 17th January 2017



Flow Characteristic Curve PD50CS



Observation Comments: Flow rates from 0-0.75 L/s (22mm Head) produced a flat characteristic curve. At 1.0 L/s the weir flow transitioned to surcharged flow with the water head rising rapidly to 60mm

at 1.5 L/s. The maximum flow limit to maintain weir flow conditions is 0.75 L/s.








Surcharged Flow 3.5 L/s (120mm)

Observation Comments: Flow rates from 0-2.0 L/s (50mm Head) produced a flat characteristic curve with weir flow

conditions. At 2.5 L/s the weir flow transitioned to vortex flow, then to surcharged flow at 3.5 L/s (120mm)

characterised by a sudden priming of the outlet and water level flucuating 50mm. The maximum flow limit to maintain weir flow conditions is 2.0 L/s.








Vortex Flow 10.0 L/s (115mm)

Observation Comments: Flow rates from 0-4.0 L/s (80mm Head) produced a flat characteristic curve with weir flow

conditions. At 5.0 L/s the weir flow transitioned to vortex flow, and remained in vortex flow up to 10.0 L/s

(115mm). The maximum flow limit to maintain weir flow conditions is 4.0 L/s.






Flow Characteristic Curve - Q100/80SR

Weir Flow 0.75 L/s (14 mm)

Orifice Flow 1.5 L/s (50 mm)

Observation Comments: Flow rates from 0 - 0.75 L/s (14 mm Head) produced a linear characteristic curve. At 1.0 L/s the weir flow transitioned to orifice flow conditions. Flow rates between 1.0 - 2.0 L/s were observed to fluctuate bewteen wier and orifice conditions.

The maximum stable water level achieved was 70 mm at a flowrate of 2.0L/s. Increasing the flowrate beyond this value caused the tank to surcharge.

The maximum flow limit to maintain weir flow conditions was 0.75 L/s.






Flow Characteristic Curve - R130SR4

Weir flow - 1 L/s (40mm)

Orifice Flow - 3.0 L/s (80mm)

Observation Comments: A concentric swirl pattern and air core was observed which indicated weir flow conditions, with

the water head level stabilising at each flow rate setpoint from 0-2.0 L/s producing a linear characteristic curve for all outlet pipe connections.

At 3.0 L/s a transition from swirl motion to vortex flow was obvserved, as the air core decreased and moved to the side of the grate. At 3.0 L/s the vortex surcharged and transitioned to orifice conditions were characterised by the water level surging down 10 -20mm.

The maximum flow limit to maintain weir flow conditions is 2.0 L/s.






Flow Characteristic Curve Q130SR4



Observation Comments: Flow rates from 0-2.5 L/s (55mm Head) produced a linear characteristic curve. At 3.0 - 3.5 L/s

the weir flow transitioned to vortex flow, then surcharged with the head level stabilising at 55mm. From 3.5 - 5 L/s the flow conditions cycled between vortex and surcharged flow characterised by

the water level fluctuating 20mm. The maximum flow limit to maintain weir flow conditions is 2.5 L/s.






Flow Characteristic Curve - R150SR4



Observation Comments: Flow rates from 0-2 L/s (60mm Head) produced a linear characteristic curve. At 2.5 L/s the weir

flow transitioned to vortex flow with the head level stabilising at 55-60mm. Flow rates from 3-5 L/s the vortex surcharged and transitioned to orifice conditions, characterised

by the water level fluctuating 10 -20mm. The maximum flow limit to maintain weir flow conditions is 2.5 L/s.








Surcharged flow - 3 L/s (40mm)

Observation Comments: Flow rates from 0-2.0 L/s (35mm Head) produced a linear characteristic curve. At 2.5 - 3.0 L/s

the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow characterised by the water level fluctuating 20mm.

At 4.0 L/s the flow surcharged and stabilised at 30mm head level. Flowrates between 5-6 L/s produced surcharged flow conditions with the water head rising

steadily and stabilising. The maximum flow limit to maintain weir flow conditions is 2.0 L/s.









Observation Comments: Flow rates from 0-2.0 L/s (20mm) produced a linear characteristic curve which began to flatten at

2.5 L/s. At 3.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 10mm. At 4.0 L/s the flow surcharged . Flowrates between 5-8 L/s produced surcharged flow conditions with the water head rising rapidly

or fluctuating 40mm with the vertical pipe. The maximum flow limit to maintain weir flow conditions is 2.0 L/s.






Flow Characteristic Curve Q200/150SR



Observation Comments: Flow rates from 0-4.0 L/s (25mm Head) produced a linear characteristic. At 5.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 10mm. Flowrates between 6.0-12.0 L/s produced surcharged flow conditions with the water head rising

rapidly to 80mm. The maximum flow limit to maintain weir flow conditions is 4.0 L/s.






Flow Characteristic Curve R225SR4



Observation Comments: Flow rates from 0-2.5 L/s (35mm Head) produced a linear characteristic curve. At 3.0 L/s the weir flow transitioned to vortex flow, then surcharged . From 3.5 - 6 L/s the flow

conditions cycled between vortex and surcharged flow characterised by the water level fluctuating 10 -20mm.

The maximum flow limit to maintain weir flow conditions is 2.5 L/s.






Flow Characteristic Curve Q225/150SR4



Observation Comments: Flow rates from 0-2.0 L/s (20mm Head) produced a linear characteristic curve which began to

flatten at 2.5 L/s. At 3.0-4.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged

flow characterised by the water level fluctuating 5mm. Flowrates between 5-10 L/s produced surcharged flow conditions with the water head rising







Flow Characteristic Curve R150S4/C



Observation Comments: Flow rates from 0-2.5 L/s (50mm) produced a linear characteristic curve which begain to flatten

at 2.5 L/s. At 3.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 20mm. At 4.0 L/s the flow surcharged and stabilised at 30mm head level. Flowrates between 5-6 L/s produced surcharged flow conditions with the water head fluctuating

40mm. The maximum flow limit to maintain weir flow conditions is 2.5 L/s.






Flow Characteristic Curve Q200S4/C

Weir Flow 2.0 L/s (20mm) Orifice flow 4.0 L/s (30mm)


flatten at 2.5 L/s. At 3.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 10mm. At 4.0 L/s the flow surcharged. Flowrates between 5.0-8.0 L/s produced surcharged flow conditions with the water head rising

rapidly or fluctuating 40 mm with the vertical pipe. The maximum flow limit to maintain weir flow conditions is 2.0 L/s.




0

20

40

60

80

100

120

140

0 1 2 3 4 5 6 7 8

Wat

er H

ead

Leve

l (m

m)

Flow Rate (L/s)

TRANSITION FLOW REGIONPlease note that the water depth levels in this shaded area of

the chart were observed to fluctuate continuously between maximum and minimum levels due to the transition between weir and orifice flow conditions occurring at the outlet. Only

the maximum observed water levels are plotted on this chart.



Flow Characteristic Curve R225S4C




flatten at 2.5 L/s. At 3.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 10mm. At 4.0 L/s the flow surcharged and stabilised at 30mm head level. Flowrates between 5-8 L/s produced surcharged flow conditions with the water head fluctuating

40mm. The maximum flow limit to maintain weir flow conditions is 2.5 L/s.







Orifice Flow 6 L/s (30mm)

Observation Comments: Flow rates from 0-4.0 L/s (25mm Head) produced a linear characteristic. At 5.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow

characterised by the water level fluctuating 10mm. Flowrates between 6.0-12.0 L/s produced surcharged flow conditions with the water head rising







Flow Characteristic Curve R225S4/C150



Observation Comments: Flow rates from 0-2.0 L/s (20 mm Head) produced a linear characteristic curve which began to

flatten at 2.5 L/s. At 3.0 - 4.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged

flow characterised by the water level fluctuating 5 mm. Flowrates between 5-10 L/s produced surcharged flow conditions with the water head rising

rapidly to 90 mm. The maximum flow limit to maintain weir flow conditions is 2.5 L/s.






Flow Characteristic Curve Q225S/C150




level out at 8.0 L/s. At 8.0 L/s the weir flow transitioned to vortex flow, cycling between vortex and surcharged flow. At 10.0 14.0 L/s the flow surcharged with the water head rising to rapidly to 75mm. The maximum flow limit to maintain weir flow conditions is 6.0 L/s.






Flow Characteristic Curve R300S/C150










Flow Characteristic Curve Q300D/150C











Weir flow - 1.0 L/s (60mm)

Surcharged Flow - 2.5 L/s (110mm)

Observation Comments: A concentric swirl pattern was observed which indicated weir flow conditions, with the water head

level stabilising at each flow rate setpoint from 0-2.0 L/s. At 2.5 L/s a transition from swirl motion to vortex flow was observed, as the air core decreased to

approximately 20mm Diameter, followed by a sudden increase in water head level as the vortex collapsed to surcharged orifice flow.

The maximum flow design limit to maintain weir flow conditions is 2.0 L/s. I hereby certify that the test results presented on this outlet performance certificate are true and correct and were obtained using recognised AHSCA Gutter Outlet Testing procedures. Dr Terry Lucke, Chief Researcher: Date: 16th November 2016






Weir flow 1 L/s (50mm)


Observation Comments: A concentric swirl pattern and air core was observed which indicated weir flow conditions, with

the water head level stabilising at each flow rate setpoint from 0-2.0 L/s. At 2.5 L/s a transition from swirl motion to vortex flow was observed, as the air core decreased to

approximately 10mm Diameter and moved to the side of the grate. At 3-3.5 L/s the vortex surcharged and transitioned to orifice conditions characterised by the water level surging between 40-100mm at constant flow rates above 3 L/s.

The maximum flow limit to maintain weir flow conditions is 2.0 L/s. I hereby certify that the test results presented on this outlet performance certificate are true and correct and were obtained using recognised AHSCA Gutter Outlet Testing procedures. Dr Terry Lucke, Chief Researcher: Date: 16th November 2016





Flow Characteristic Curve Q130S4/C90



Observation Comments: A concentric swirl pattern was observed which indicated weir flow conditions, with the water head

level stabilising at each flow rate setpoint from 0-2.0 L/s. At 2.5 L/s a transition from swirl motion to vortex flow was observed, as the air core decreased to

approximately 10mm Diameter and moved to the side of the grate. At 3.0 L/s the vortex surcharged and transitioned to orifice conditions were characterised by the water level surging between 30-90mm.

The maximum flow limit to maintain weir flow conditions is 2.0 L/s. I hereby certify that the test results presented on this outlet performance certificate are true and correct and were obtained using recognised AHSCA Gutter Outlet Testing procedures. Dr Terry Lucke, Chief Researcher: Date: 16th November 2016



Documents

636 - SPS Roof and Floor Draining Systems · 636 6shfldolw\ 3oxpelqj 6xssolhv 3w\ /wg $ & 1 $gguhvvhv 3rvwdo 32 %r[ .loodud 16: 6wruh 8qlw / /rzhu *leehv 6wuhhw &kdwvzrrg 16: