60HZ ALTERNATORS Product Catalog - Linz Electric€¦ · sinGle-phase brushless synchronous alTernaTors wiTh capaciTor: e1c13/4 13 General FeaTures 14 2 POLE ALTERNATORS ... kVA 3

60HZ ALTERNATORSProduct Catalog

2 For more information and support contact: T.+1 (847) 595 1473 - [email protected] - www.linzelectric.us

4 POLE ALTERNATORS

THREE-PHASE BRUSHLESS SYNCHRONOUS ALTERNATORS WITH AVR: E1X13/4 - SLT - PRO18 - PRO22 - PRO28 - PRO35-PRO40 6

4 POLE THREE-PHASE ALTERNATORS EFFICIENCY TABLE 8

SINGLE-PHASE BRUSHLESS SYNCHRONOUS ALTERNATORS WITH AVR: E1X13/4 1PH- SLS - PRO18 1PH - PRO22 1PH 9

TECHNICAL FEATURES E1X - SL - PRO 10

ACCESSORIES FOR E1X - SL - PRO 11

THREE-PHASE SYNCHRONOUS ALTERNATORS WITH BRUSHES: E1S13/4 12

SINGLE-PHASE BRUSHLESS SYNCHRONOUS ALTERNATORS WITH CAPACITOR: E1C13/4 13

GENERAL FEATURES 14

2 POLE ALTERNATORS

THREE-PHASE BRUSHLESS SYNCHRONOUS ALTERNATORS WITH AVR: E1X13/2 16

SINGLE-PHASE BRUSHLESS SYNCHRONOUS ALTERNATORS WITH AVR: E1X13/2 1PH 17

TECHNICAL FEATURES E1X/2 18

SINGLE-PHASE BRUSHLESS SYNCHRONOUS ALTERNATORS WITH CAPACITOR: SP10 - E1C10 - E1C11 - E1C13/2 19

TECHNICAL FEATURES SP10-E1C 20

THREE-PHASE SYNCHRONOUS ALTERNATORS WITH BRUSHES: E1S10- E1S11 - E1S13/2 21

THREE-PHASE SYNCHRONOUS ALTERNATORS WITH BRUSHES AVR AND COMPOUND: E1S10/KE - E1S11/KE 22

GENERAL FEATURES 23

CONNECTIONS TO THE TERMINAL BOARD 24

TECHNICAL DRAWINGS AND DIMENSIONS 26

TABLE OF CONTENTS

THE COMPANY

LINZ ELECTRIC S.p.A., part of the Pedrollo Group, is specialized in the production of alternators and rotating welders. It was founded in 2002 and became in few years one of the major players in the sector. The knowledge and long experience of its designers together with the strong propensity for innovation and a natural tendency for investment has quickly led to the development of a full range of products whose high quality standards are recognized and appreciated worldwide by the most important gen-sets manufacturers. In accordance with its deep values the main focus of Linz Electric has always been the Customer Satisfaction by controlling the key points of the production through a strong vertical integration, a constant focus on the Product Quality and a quick and complete Service.

LINZ ELECTRIC lands in the States in 2015, with a new subsidiary, LINZ ELECTRIC INC. based in Northbrook, Illinois. Thanks to this important step and to the proximity to the market we have been offering an optimized pre- and after-sales service to our North American customers , quick deliveries and customer support through the competence that always distinguishes Linz Electric and its people.

Arcole, Verona, Italy

Northbrook, IL, USA

4-POLE ALTERNATORS


MODEL

3 Phase277/480V - High WYE 138/240V - Low WYE

kVA

3 Phase 240/416V - High WYE 120/208V - Low WYE

kVA

Single Phase120/240V - Series Parallel

kVA

Net weight SAE(lbs)

150/40 125/40 105/40 80/40 150/40 125/40 105/40 80/40 150/40 125/40 105/40 80/40

E1X1

3/4

E1X13S A/4 9 8 7.5 6.5 8 7.5 6.5 5.5 5 5 4.5 4 140

E1X13S B/4 10.5 10 9.5 8.5 9.5 9 8.5 7.5 6 6 5.5 5 154

E1X13S C/4 13 12 11 9.5 12.5 11 10.5 9 8 7 7 6 169

E1X13M E/4 18 17 15.5 13.5 14.5 14 13 11.5 9.5 9 8.5 7.5 212

E1X13M F/4 21 19 17.5 15.5 18.5 17 15.5 13.5 12 11 10 8.5 221

SLT SLT18 MC 19 18 17 15 16.5 16 15 13 11 10.5 10 8.5 251

SLT18 MD 26 24 22 19 24 21 20 17.5 15.5 13.5 13 11.5 256

PRO1

8

PRO18S A/4 26 24 22 19 24 21 20 17.5 15.5 13.5 13 11.5 267

PRO18S B/4 32 30 27.5 24 28.5 26 24 21 18.5 17 15.5 13.5 297

PRO18S C/4 38 36 33.5 29 36 34 32 28 23.5 22 21 18.5 331

PRO18M D/4 45 42 38.5 33.5 40 38.5 36 31.5 26 25 23.5 20.5 375

PRO18M E/4 55 50 47 41 50 48 45 39.5 32.5 31 29.5 26 441

PRO18L F/4 64 60 54 47 58 56 48 42 38 36.5 31 27 522

PRO18L G/4 76 72 66 57.5 62 60 50 43.5 40.5 39 32.5 28.5 590

PRO2

2

PRO22S A/4 83 75 70.5 61.5 71 65 61 53.5 46 42.5 39.5 34.5 581

PRO22S B/4 95 90 83 72.5 86 81 75 65.5 56 52.5 49 43 651

PRO22S C/4 110 100 95 83 100 94 88 77 65 61 57 50 697

PRO22S D/4 130 120 111.5 97.5 118 110 101 88 76.5 71.5 69.5 57 781

PRO22M E/4 167 155 145 126.5 148 139 129 113 96 90.5 84 73.5 957

PRO22M F/4 195 180 167.5 146 162 150 139 121 105 97.5 90.5 79 1046

PRO22M G/4* 210 190 176 153.5 180 165 150 131 117 107 97.5 85 1046

• IP23 PROTECTION • COMPACT AND MECHANICALLY RESISTANT • EXCELLENT WAVE FORM• MINIMUM MAINTENANCE• HIGH EFFICIENCY• WITH AUXLIARY WINDING (see page 10)• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating Materials - General

CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian Electrical Code, Part II)• cCSAus CERTIFICATION (Standards: CAN/CSA –C22.2 No. 100-14 (R2009) Motors and Generators, UL1004-1

2nd ed. Rotating Electrical Machines–General Requirements, UL1004-4 2nd ed. Electric Generators)

• For overall dimensions see from page 26 to 30

INSULATION SYSTEM 250H

PRO18

• Brushless synchronous alternators with AVR • 0.8 Power Factor • Class H Insulation• 12 Leads (*6 Leads)• With Auxiliary Winding

60HZ - THREE PHASE4 POLE / 1800 RPMBRUSHLESS WITH AVR

7For more information and support contact: T.+1 (847) 595 1473 - [email protected] - www.linzelectric.us

MODEL


kVA

3 Phase 240/416V - High WYE 120/208V - Low WYE

kVA

Single Phase120/240V - Series Parallel*240V - Delta riconnected

kVA

Net weight SAE(lbs)

150/40 125/40 105/40 80/40 150/40 125/40 105/40 80/40 150/40 125/40 105/40 80/40

PRO2

8

PRO28S A/4 234 215 192 168 213 196 175 153 138 127 114 100 1243

PRO28S B/4 260 240 210 183 245 225 200 175 159 146 130 113 1303

PRO28S C/4 305 270 240 209 290 260 225 196 188 169 146 127 1473

PRO28S D/4 320 300 250 218 310 290 240 209 201 188 156 136 1611

PRO28M E/4 370 360 300 262 345 335 277 242 224 218 180 157 1838

PRO28M F/4 435 420 360 314 400 390 335 292 260 253 218 190 2092

PRO28L G/4* 490 480 430 375 435 430 386 337 283 279 251 219 2280

PRO3

5

PRO35S B/4 575 540 485 423 520 480 440 384 338 312 286 250 2610

PRO35S C/4* 635 600 540 471 575 550 495 432 374 357 322 281 2783

PRO35S D/4 695 660 590 515 615 580 510 445 400 377 331 289 2960

PRO35M E/4* 760 720 660 576 680 640 590 515 442 416 383 334 3294

PRO35M F/4* 840 800 730 637 750 715 650 567 487 465 422 368 3308

PRO35M G/4 920 870 780 681 830 785 700 611 539 510 455 397 3656

PRO35L H/4* 1040 960 935 816 915 870 860 759 595 565 559 493 4116

PRO4

0

PRO40S A/4* 1200 1116 1044 920 1090 1050 975 850 740 680 620 540 4473

PRO40S B/4* 1370 1260 1176 1000 1130 1100 1020 900 870 800 730 640 4508.5

PRO40M C/4* 1500 1400 1300 1150 1300 1250 1150 1000 980 900 820 720 4965

PRO40M D/4* 1750 1620 1540 1300 1600 1480 1400 1200 1090 1000 910 800 5809

PRO40L E/4* 1920 1800 1650 1470 1750 1650 1500 1350 1200 1100 1000 880 7220

• IP23 PROTECTION • COMPACT AND MECHANICALLY RESISTANT • EXCELLENT WAVE FORM• MINIMUM MAINTENANCE• HIGH EFFICIENCY• WITH AUXLIARY WINDING (see page 10)• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating

Materials - General CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian Electrical Code, Part II)



PRO35

• Brushless synchronous alternators with AVR • 0.8 Power Factor • Class H Insulation• 12 Leads (*6 Leads)• With Auxiliary Winding



60HZ - THREE PHASE4 POLE / 1800 RPMEFFICIENCY TABLE

MODEL Leads


60 Hz - 1800 rpm - cosφ = 0.8125/40

kVA eff.%

E1X1

3/4

E1X13S A/4 12 8 81E1X13S B/4 12 10 83E1X13S C/4 12 12 84.6E1X13M E/4 12 17 86E1X13M F/4 12 19 86.4

SLT SLT18 MC 12 18 87.4

SLT18 MD 12 24 87.8

PRO1

8

PRO18S A/4 12 24 87.8PRO18S B/4 12 30 88.2PRO18S C/4 12 36 88.8PRO18M D/4 12 42 90.4PRO18M E/4 12 50 91.1PRO18L F/4 12 60 91.2PRO18L G/4 12 72 91.4

PRO2

2

PRO22S A/4 12 76 90.4PRO22S B/4 12 90 90.4PRO22S C/4 12 102 90.6PRO22S D/4 12 120 90.9PRO22M E/4 12 156 92.5PRO22M F/4 12 180 92.8PRO22M G/4 6 192 93.5

SLT18


MODEL Leads


60 Hz - 1800 rpm - cosφ = 0.8125/40

kVA eff.%

PRO2

8

PRO28S A/4 12 215 92.5PRO28S B/4 12 240 92.5PRO28S C/4 12 270 92.7PRO28S D/4 12 300 93.2PRO28M E/4 12 360 93.3PRO28M F/4 12 420 94PRO28L G/4 6 480 94.2

PRO3

5PRO35S B/4 12 540 95.5PRO35S C/4 6 600 95.9PRO35S D/4 12 660 95.9PRO35M E/4 6 720 95.7PRO35M F/4 6 804 95.4PRO35M G/4 12 870 96.2PRO35L H/4 6 960 96.5

PRO4

0

PRO40S A/4 6 1116 96.1

PRO40S B/4 6 1260 96.3

PRO40M C/4 6 1400 96.5

PRO40M D/4 6 1620 96.5

PRO40L E/4 6 1800 96.9


MODELSingle Phase Dedicated

120/240V - Series ParallelkVA

Net weight SAE(lbs)

Eff%cosφ = 1

150/40 125/40 105/40 80/40

E1X1

3/4 1

PH

E1X13S A/4 1PH 6.5 6 5.5 4.8 140 81

E1X13S B/4 1PH 7.5 7 7 6 154 82

E1X13S C/4 1PH 9.5 9 8 7 169 84.5

E1X13M E/4 1PH 13 12.5 11.5 10 212 85.5

E1X13M F/4 1PH 15.5 14 13 11.5 221 86

SLS SLS18 MC 13 12 11 9.5 247 85.8

SLS18 MD 18.5 18 16.5 14.5 254 87

PRO1

8 1PH

PRO18S A/4 1PH 18.5 18 16.5 14.5 267 87

PRO18S B/4 1PH 23.5 22 20 17.5 297 87

PRO18S C/4 1PH 28 26.5 24.5 21.5 331 88.2

PRO18M D/4 1PH 33 30.5 28 24.5 375 90

PRO18M E/4 1PH 40 36.5 34.5 30 441 90.6

PRO18L F/4 1PH 46.5 44 39.5 34.5 522 90.8

PRO18L G/4 1PH 55.5 52.5 48 42 590 92

PRO2

2 1PH

PRO22S A/4 1PH 58 54 50 44 581 90

PRO22S B/4 1PH 69 65 60 55 651 90.2

PRO22S C/4 1PH 76 72 67 60 697 90

PRO22S D/4 1PH 91 86 80 72 781 90.5

PRO22M E/4 1PH 118 112 103 95 957 92

PRO22M F/4 1PH 130 125 118 110 1046 92.1

• IP23 PROTECTION • COMPACT AND MECHANICALLY RESISTANT • EXCELLENT WAVE FORM• MINIMUM MAINTENANCE• HIGH EFFICIENCY• WITH AUXLIARY WINDING (see page 10)• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating Materials -

General CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian Electrical Code, Part II)• cCSAus CERTIFICATION (Standards: CAN/CSA –C22.2 No. 100-14 (R2009) Motors and Generators,

UL1004-1 2nd ed. Rotating Electrical Machines–General Requirements, UL1004-4 2nd ed. Electric Generators)

• For overall dimensions see from page 26 to 30INSULATION SYSTEM 250H

E1X13

• Brushless synchronous alternators with AVR • Dedicated Single-phase• 1 Power Factor• Class H Insulation• With Auxiliary Winding

60HZ - SINGLE PHASE4 POLE / 1800 RPMBRUSHLESS WITH AVR


MECHANICAL CHARACTERISTICSE1X, SL and PRO series are compact, durable and mechanically resistant. The casing, front and rear shields are made of vibration resistant aluminium alloy and steel. The shafts are made of high resistant steel and the bearings are lifelong lubricated. Rotors are extremely strong in order to resist the escape velocity of the drive engines and they are equipped with a damping cage to ensure excellent performance even during single-phase distorting and unbalanced three-phase loads.All standard motor couplings used in the market are available.

ELECTRICAL FEATURESThe rotor and stator insulation is made of class H materials and the winding is tropicalised. The magnetic lamination is low loss rate to ensure maximum performance.

WINDINGS: All windings are all made of class H materials. The quality of the copper undergoes a double check to guarantee the very best standard in the market.Three-phase 12 leads windings are wound to 2/3 pitch to reduce the total harmonic voltage distortion by keeping it constantly within 3% during all electrical function conditions.

DAMPING CAGE: Every model in the E1X, SL and PRO series has a damping cage as standard which allows the alternator to work in parallel stand-alone or connected to the grid and operating with single-phase distorting and unbalanced three-phase loads. The damping cage on all the models provides added value since the market for applications using electronic loads is growing rapidly (UPS , inverter, chopper and switching power supply units). These loads need to be managed by power switching devices with a good quality voltage wave form even when loaded.

AUXILIARY POWER WINDING: The important aim of the auxiliary winding function is to guarantee that the power supply to the electronic regulator is not affected by the load connected to the generator. This winding ensures that the regulator operates perfectly whatever the load type, even with a severe non-linear load.The auxiliary winding is galvanically insulated and independent of the main windings. It has been dimensioned to guarantee a permanent short-circuit current equal to 3 times the rated current for at least 10 seconds, thus providing optimal function during heavy start-up transients of asynchronous motors.This auxiliary winding is the technological answer to the PMG (permanent magnet generator) power supply system, used in the past to support short circuit current, a function that this special auxiliary winding now carries out perfectly.

OVERLOADS AND SHORT CIRCUIT CURRENT: Overload of 10% of the rated power for 1 hour every 6 hours is allowed.In case of a three-phase symmetric short circuit, the permanent current is, on average, 300% of the rated current. This value can be sustained for 10 seconds.

THD (TOTAL HARMONIC DISTORTION): With linear and balanced load is less than 3% with or without load (L-L and L-N)

ELECTRONIC REGULATORS: The voltage regulators are designed, manufactured and tested entirely in our factories. They are made with state-of-the-art electronic components and technologies that ensure reliability and sturdiness under any generator working conditions. Two models are available: single phase voltage reference model HVR-11 and three-phase voltage reference HVR-30 with three separate inputs. The standard E1X-SL-PRO alternators series include the following electronic regulators: HVR-11 on E1X, SL, PRO18 and PRO22 (HVR30 is supplied on request) and HVR-30 on PRO28, PRO35 and PRO40.

Main features of the regulators- Voltage adjustment within the limit of ±1%- Stability control adjustment to guarantee the best dynamic response for any situation (type of drive motor or alternator size) - Output voltage adjustment - Adjustment of the low frequency protection - Adjustment of the over-excitation protection setting caused by abnormal loads- Remote potentiometer inlet - 50Hz or 60Hz working possibility- Parallel operation with a specific kit (DP01) All adjustments are made with multi-turn trimmers that allow an extremely accurate setting.

TECHNICAL FEATURES E1X-SL-PRO


PD (PARALLEL DEVICE/DROP DEVICE): This device is recommendend for paralleling two or more alternators. Furthermore, our AVR are equipped with a (0-5)Vdc input to connect external governors running parallel operation. ANTI-CONDENSATION HEATERS: Anti-condensation heaters, specifically made to apply onto the main stator during the winding final stage production, are available for the entire PRO series.

IMPREGNATIONS FOR MARINE USE: The main stator of all E1X, SL and PRO alternators undergoes a standard treatment with a red paint: a protective class F high temperature insulating enamel phenolic resin that can be applied to all the generator wound parts forming a flexible film with excellent mechanical, heat and chemical resistance. It is suggested for use in high humidity or salinity environments.

Characteristics of red phenolic resin:• Excellent chemical resistance to water, salt mineral and acids• Oil and moisture restistant• Thermal class: 175°C• Excellent heat resistance

THERMAL PROBES: On request, thermal capsules with an NC switch (normally closed) and PT100 probes can be fitted into the windings. The PRO35 series comes complete with bimetallic thermal protectors.

GEAR BOXES: The E1X, PRO18 and PRO22 series can be supplied with gear box for PTO drive.

SUPPRESSION OF RADIO INTERFERENCE: all our products comply with the EN55014-1, EN55011 and VDE0875 directives, guaranteeing a grade G and N level. Moreover, radio interference filters are available in order to match the requirements of the most restrictive norms.

ACCESSORIES E1X13 SLS-SLT PRO18 PRO22 PRO28 PRO35-PRO40

B3/B14 mounting form • n.a. • • • •

Gear box • n.a. • • n.a. n.a.

Impregnation for marine environment • • • • • •

Regulator HVR30 n.a. n.a. • • std. std.

Device for parallel operations n.a. n.a. • • • std.

EMI filter • • • • • std.

Anticondensation heaters • • • • • •

Bimetallic thermal protections • • • • • std.

PT100 for bearings • • • • • •

PT100 for windings • • • • • •

PMG n.a. n.a. n.a. n.a. • •

ACCESSORIES FOR E1X-SL-PRO

• n.a.: not available for this model• std.: available and no overprice for this option on this model


MODEL

3 Phase 127/220V or 220/380V

kVANet weight SAE

(lbs)Eff%

cosφ = 0.8150/40 125/40 105/40 80/40

E1S1

3/4

E1S13S A/4 10.3 9.6 9 8 128 81.4

E1S13S B/4 13 12 11 9.6 142 83.5

E1S13M D/4 16.5 16 14.5 12.6 171 85

E1S13M E/4 21 19 17.5 15 200 86.3

E1S13M F/4 26 24 22 19 207 86.5

TECHNICAL FEATURES

E1S13/4 series are three-phase 4 pole alternators with brushes and compound voltage transformer regulation. This series has been designed for applications requiring high start-up capability of inductive loads such as electric motors, electric water pumps, air compressors.

VOLTAGE: Standard 220/380V or 127/220 V at 60 Hz . Special voltage on request.

VOLTAGE ACCURACY: ± 4% froload to full load, cosφ = 0.8 at constant rotation speed.

SHORT CIRCUIT CURRENT: In case of short circuit the permanent current is 350% of the rated current. This value can be sustained for 10 seconds.

OVERLOAD: 10% overload for one hour every 6 hours is accepted. Short overloads can be very high (three times the rated current).

ASYNCHRONOUS MOTORS STARTING: 1 HP per kVA of the generator can be started.

OUTPUT VOLTAGE WAVE FORM: The low harmonic content (


• MECHANICALLY RESISTANT • MINIMUM MAINTENANCE• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating Materials - General CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian

Electrical Code, Part II)• cCSAus CERTIFICATION (Standards: CAN/CSA –C22.2 No. 100-14 (R2009) Motors and Generators, UL1004-1 2nd ed. Rotating Electrical Machines–General Requirements,

UL1004-4 2nd ed. Electric Generators)


MODEL


kVANet weight SAE

(lbs)Eff%

cosφ = 1150/40 125/40 105/40 80/40

E1C1

3/4

E1C13S A/4 7.5 7 6.5 5.5 113 81.7

E1C13S B/4 9.3 8.5 7.5 6.5 127 82

E1C13S C/4 10.5 9.75 8.8 7.5 141.5 82.6

E1C13S D/4 12 11 10 8.5 151 82.8

E1C13M E/4 14.5 14 12.5 11 184.5 83

E1C13M F/4 16 15 13 11.5 192 83.2

TECHNICAL FEATURES

E1C13/4 series are single-phase 4 poles brushless alternators with an auxiliary winding loaded onto highly insulated dielectric capacitors regulating the voltage. This series has been designed for single-phase generating sets and lighting towers.

VOLTAGE ACCURACY: ± 5% from no load to full load, cosφ =1 at constant rotation speed.

SHORT CIRCUIT CURRENT: In case of short circuit the permanent current exceeds rated current by three times, ensuring the correct operation of protections.

OVERLOAD: A 10% overload for one hour every 6 hours is accepted.

TRANSIENT VOLTAGE DIP AT RATED LOAD INSERTION: The voltage dip when the load is inserted is lower than 10% at cosφ =1 and nominal rpm.


E1C13

60HZ - SINGLE PHASE4 POLE / 1800 RPMBRUSHLESS WITH CAPACITOR

• Brushless Synchronous Alternators With Capacitor

• 1 Power Factor• Class H Insulation

REFERENCE STANDARDSOur alternators are built in accordance with the provisions specified in the :• EN 60034-1, EN 60204-1, EN61000-6-2, EN61000-6-4, EN 55014-1, EN 55011 standards • 2006/95/CE and 2004/108/CE directives• cURus - Recognized insulation system under UL1446 standard (file number E481753)

E1X, SL, PRO18,PRO22, E1C13/4 series are listed by CSA Group as certified (cCSAus - CAN/CSA - C22.2 No.100-14 ) and are also built in accordance with UL 1004-1 and UL1004-4 (file number 260717)

OPERATING CONDITIONSThe performance data reported in the present catalogue are valid for operation at an altitude not exceeding 1000m (3300 ft) and ambient temperature not exceeding 40°C (104°F). If operation takes place in different conditions, consult the table below.


Power variation according to temperature and altitude

ALTITUDE m / ft

Ambient temperature25 °C / 77°F 40 °C / 104°F 45 °C / 113°F 50 °C / 122°F 55 °C / 131°F

< 1000 / 3300

1.09 1 0.96 0.93 0.91

1000-1500 / 3300-4900

1.01 0.96 0.92 0.89 0.87

1500-2000 /4900-6600

0.96 0.91 0.87 0.84 0.83

2000-3000 / 6600-9900

0.9 0.85 0.81 0.78 0.76

GENERAL FEATURES

2-POLE ALTERNATORS


MODEL


kVA

3 Phase 240/416V- High WYE 120/208V - Low WYE

kVA


kVA

Net weight SAE (lbs)

150/40 125/40 105/40 80/40 150/40 125/40 105/40 80/40 150/40 125/40 105/40 80/40

E1X1

3/2

E1X13S A/2 11 10 9.2 8 9.8 9 8.2 7.5 6.3 5.5 5 4.5 134

E1X13S B/2 13.5 12.5 11.5 10 12 11 10 8.7 7.5 7 6.5 5.7 145.5

E1X13S C/2 16.4 15 14 12 14 13 12 10.5 9 8.5 8 7 161

E1X13M D/2 21 19.5 18 16 18.2 17 15.5 14 11.5 11 10 9 198.5

E1X13M E/2 28 26 24 21 24.5 23 21 18.5 16 15 13.7 12 223

• COMPACT AND MECHANICALLY RESISTANT • EXCELLENT WAVE FORM• MINIMUM MAINTENANCE• HIGH EFFICIENCY• WITH AUXLIARY WINDING (see page 10)• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating Materials - General CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian




MODEL Leads

3 Phase277/480V - High WYE

138/240 - Low WYE60 Hz - 1800 rpm - cosφ = 0.8

125/40kVA eff.%

E1X13S A/2 12 10 80.6

E1X13S B/2 12 12.5 82

E1X13S C/2 12 15 83.4

E1X13M D/2 12 19.5 85.5

E1X13M E/2 12 26 86.2

EFFICIENCY TABLE


• Brushless synchronous alternators with AVR• 0.8 Power Factor• Class H Insulation• 12 Leads• With Auxiliary Winding


E1X13


MODEL


kVANet weight SAE

(lbs)Eff%

cosφ = 1150/40 125/40 105/40 80/40

E1X1

3/2 1

PH

E1X13S A/2 8 7.5 7 6.5 134 80.5

E1X13S B/2 9.7 9 8.4 7.8 145.5 81.5

E1X13S C/2 13 12 11 10 161 84.2

E1X13M D/2 16 15 14 13 198.5 86

E1X13M E/2 21.5 20 18.5 17.5 222.5 86.8

• COMPACT AND MECHANICALLY RESISTANT • EXCELLENT WAVE FORM• MINIMUM MAINTENANCE• HIGH EFFICIENCY• WITH AUXLIARY WINDING (see page10)• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating Materials - General CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian




60HZ - SINGLE PHASE2 POLE / 3600 RPMBRUSHLESS WITH AVR

• Brushless synchronous alternators with AVR• Dedicated Single-phase• 1 Power Factor • Class H Insulation• With Auxiliary Winding


E1X13


TECHNICAL FEATURES E1X/2

WINDINGS AND VOLTAGE: all windings are made of Class H materials. A double layer with shortened 2/3 pitch is ensuring a low harmonic content by keeping it constantly within 3% during all electrical function conditions. E1X three phase alternators are equipped with a 12 terminal winding (see page 26 for possible connections and voltages). Special voltages are available on request.

VOLTAGE ACCURACY : ± 1% from no load to full load with Power Factor 0.8 and constant rotation speed.

OVERLOADS AND SHORT CIRCUIT CURRENT: Overload of 10% of the rated power for 1 hour every 6 hours is allowed. In case of a three-phase symmetric short circuit, the permanent current is, on average, 300% of the rated current. This value can be sustained for 10 seconds.

THD (TOTAL HARMONIC DISTORTION): With linear and balanced load is less than 3% with or without load (L-L and L-N)

ELECTRONIC REGULATION : E1X series is equipped with the last generation of the HVR11 electronic regulation. All adjustments are made with multi-turn trimmers that allow an extremely accurate setting.The main features of the regulator are:- Output voltage adjustment within the limit of ±1%- Stability control adjustment to guarantee the best dynamic response for any situation (type of drive motor or alternator size)- Adjustment of the low frequency protection- Adjustment of the over-excitation protection setting caused by abnormal loads- Remote potentiometer inlet- 50Hz or 60Hz working possibility.


MODEL


kVANet weight

(lbs)Eff%

cosφ = 1150/40 125/40 105/40 80/40

SP10

SP10S A 2.2 2 1.8 1.6 25 73.5

SP10S B 3 2.7 2.4 2.1 29.8 74.5

SP10S C 3.5 3.2 2.9 2.5 33 75.5

SP10S D 4 3.7 3.3 2.9 36 76

SP10S E 4.7 4.3 3.9 3.4 39 76.5

SP10M F 5.5 5 4.7 4.1 43.6 77

SP10M G 6.6 6 5.5 4.8 46.3 77.5

MODEL


kVANet weight

(lbs)Eff%

cosφ = 1150/40 125/40 105/40 80/40

E1C1

0

E1C10S B 3 2.7 2.4 2.1 34.8 74.5

E1C10S D 4 3.7 3.3 2.9 39.7 76

E1C10S E 4.7 4.3 3.9 3.4 44 76.5

E1C10S F 5.5 5 4.7 4.1 47 77

E1C10S G 6.6 6 5.5 4.8 50.7 77.5

E1C10M H 7.9 7.25 6.8 6 64.6 79

E1C10M I 9.3 8.5 8 7 71.2 80.5

E1C10M L 10.5 9.75 9 7.8 81.0 79.5

E1C1

1 E1C11M B 13.7 12.5 11.5 10 105.4 80E1C11M C 16.4 15 13 11.5 115 80.5

E1C13

/2 E1C13M D/2 20 18 17 15 170.6 81.5E1C13M E/2 24 22 20 17.5 195 82.1

• COMPACT AND MECHANICALLY RESISTANT • EXCELLENT WAVE FORM• MINIMUM MAINTENANCE• HIGH EFFICIENCY• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating Materials - General CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian


UL1004-4 2nd ed. Electric Generators)• For overall dimensions see from page 34 to 40



SP10

E1C10

60HZ - SINGLE PHASE2 POLE / 3600 RPMBRUSHLESS WITH CAPACITOR

• Brushless synchronous alternators with capacitor

• 1 Power Factor • Class H Insulation


SP and E1C series are single-phase 2 poles brushless alternators with an auxiliary winding loaded onto highly insulated dielectric capacitors regulating the voltage. This series has been designed for portable single-phase generating sets and lighting towers .

VOLTAGES: standard 120/240V, 60Hz. Special voltages on request.

VOLTAGE ACCURACY: ± 5% from no load to full load, cosφ =1 at constant rotation speed.

SHORT CIRCUIT CURRENT: In case of short circuit the permanent current exceeds rated current by three times, ensuring the correct operation of protections.

OVERLOAD: A 10% overload for one hour every 6 hours is accepted.

OUTPUT VOLTAGE WAVE FORM: The low harmonic content (


MODEL

3 Phase 127/220V or 220/380V

kVANet weight

(lbs)Eff%

cosφ = 0.8150/40 125/40 105/40 80/40

E1S1

0

E1S10M G 7.7 7 6.5 5.7 63.3 79

E1S10M H 9.3 8.5 8 7 73 81

E1S10M I 12 11 10 9 81.4 82.5

E1S10L L 13 12 11 9.7 91.3 82.7

E1S1

1 E1S11M AS 15 14 13 11.5 100 83.5E1S11M B 18 16.5 15.5 13.6 113.5 84

E1S1

3 E1S13S C/2 21 19.2 17.5 15.5 134.5 85.5E1S13M D/2 28 26.4 24 21 170.6 86.5

E1S13M E/2 35 32.4 29.5 26 195 87.5

• COMPACT AND MECHANICALLY RESISTANT • EXCELLENT WAVE FORM• HIGH STARTING CAPACITY OF INDUCTIVES LOADS• HIGH EFFICIENCY• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating Materials - General CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian

Electrical Code, Part II)

• For overall dimensions see pages 34, 35, 41 and 42

TECHNICAL FEATURES E1SE1S/2 series are three-phase 2 pole alternators with brushes and compound voltage transformer regulation. This series has been designed for applications requiring high start-up capability of inductive loads such as electric motors, electric water pumps, air compressors.

VOLTAGE: Standard 220/380 or 127/220 at 60Hz. Special voltage on request.

VOLTAGE ACCURACY: ± 4% from no load to full load, PF 0.8 at constant rotation speed.


OVERLOAD: 10% overload for one hour every 6 hours is accepted.

ASYNCHRONOUS MOTOR STARTING: 1 HP per kVA of the generator can be started.

THD (TOTAL HARMONIC DISTORTION): With linear and balanced load is less than 5% with or without load (L-L and L-N) and allows supplying any type of load, including distorting loads.


E1S13

60HZ - THREE PHASE2 POLE / 3600 RPMWITH BRUSHES AND COMPOUND

• Brush Synchronous Alternators With Transformer Regulation/Compound

• 0.8 Power Factor• Class H Insulation• 6 Leads


MODEL

3 Phase127/220V or 220/380V

kVA-Net weight

(lbs)Eff%

cosφ = 0.8150/40 125/40 105/40 80/40

E1S1

0 - KE

E1S10M G-KE 6 5.4 5 4.7 63.3 79

E1S10M H-KE 7.5 7 6.3 5.8 73 81

E1S10M I-KE 9.3 8.5 7.8 7 81.4 82.5

E1S10L L-KE 12 11 10 9 92.8 82.8

E1S11

-KE E1S11M AS-KE 13.2 12.5 11.5 10.5 100 83.7

E1S11M B-KE 15 14 12.8 11.8 113.5 84

TECHNICAL FEATURES

E1S KE series are three-phase 2 pole alternators with brushes and a double voltage regulation: Electronic (AVR) and voltage transformer regulation (COMPOUND). This series has been designed for applications requiring high start-up capability of inductive loads such as electric motors, electric water pumps, air compressors thus maintaining a voltage accuracy of +/1%.The “KE” system, envisaging the combined use of a compound and an electronic regulation, solves the typical inconveniences of an exclusively compound or electronic regulation. The electronic regulator has an ad-hoc delayed load insertion time to allow the compound to act during the transient voltage dip. After that period of time, the electronic regulation resumes the operations by correcting the output voltage. The generator can operate with both the compound regulation alone and the electronic regulation alone, increasing the reliability of the machine in case of failure of one of the two systems.

VOLTAGE: Standard 220/380 or 127/220 at 60Hz. Special voltage on request.

VOLTAGE ACCURACY: ± 1% from no load to full load, PF 0.8 at constant rotation speed.


OVERLOAD: 10% overload for one hour every 6 hours is accepted.

ASYNCHRONOUS MOTOR STARTING: 1 HP per kVA of the generator can be started.

THD (TOTAL HARMONIC DISTORTION): With linear and balanced load is less than 5% with or without load (L-L and L-N) and allows supplying any type of load, including distorting loads.

• COMPACT AND MECHANICALLY RESISTANT• EXCELLENT WAVE FORM• HIGH STARTING CAPACITY OF INDUCTIVES LOADS AND ±1% VOLTAGE REGULATION• HIGH EFFICIENCY• UL RECOGNIZED INSULATION SYSTEM (Standards: UL 1446, Systems of Insulating Materials - General CSA-C22.2 No. 0, Appendix B, General Requirements - Canadian

Electrical Code, Part II)



E1S10

60HZ - THREE PHASE2 POLE / 3600 RPMBRUSHES AVR AND COMPOUND

• Brush Synchronous Alternators With Mixed Regulation (AVR + COMPOUND)

• 0.8 Power Factor• Class H Insulation• 6 Leads


GENERAL FEATURES

MECHANICAL SPECIFICATIONSThe SP and E1 series are manufactured by means of advanced technology and high quality materials. The frame is made of vibration-resistant aluminum alloy. The shaft is in high tensile steel. The rotor is designed to resist the runaway speed of the traction motors. The bearings are life-long lubricated. Axial ventilation is ensured with intake from the side opposite to the coupling. Both rotation directions are possible.All the motor coupling standards available on the market are supported.

ELECTRICAL FEATURESInsulation is obtained with H class material for both stator and rotor and the windings are tropicalized. Low-loss lamination is used.

REFERENCE STANDARDSOur alternators series are built in accordance with the provisions specified in the :• EN 60034-1, EN 60204-1, EN 61000-6-2, EN 61000-6-4, EN 55014-1, EN 55011 standards• 2006/95/CE and 2004/108/CE directives• cUR us - Recognized insulation system under UL1446 standard (file number E481753)SP , E1C and E1X13/2 series are listed by CSA Group as certified (cCSA us - CAN /CSA - C22.2 No.100-14 ) and are also built in accordance with UL 1004-1 and UL 1004-4 (file number 260717).

OPERATING CONDITIONSThe performance data reported in the present catalogue are valid for operation at an altitude not exceeding 1000m (3300 ft) and ambient temperature not exceeding 40°C (104°F). If operation takes place in different conditions, consult the table below.

Power variation according to temperature and altitude

ALTITUDE m / ft

Ambient temperature25 °C / 77°F 40 °C / 104°F 45 °C / 113°F 50 °C / 122°F 55 °C / 131°F

< 1000 / 3300

1.09 1 0.96 0.93 0.91

1000-1500 / 3300-4900

1.01 0.96 0.92 0.89 0.87

1500-2000 /4900-6600

0.96 0.91 0.87 0.84 0.83

2000-3000 / 6600-9900

0.9 0.85 0.81 0.78 0.76


Series High WYE (Series Star)

Parallel Low WYE (Parallel Star)

Series Delta

Parallel Delta

Zig-Zag

Double Delta (single phase connection)

12 LEADS

CONNECTIONS TO THE TERMINAL BOARD

Hz L-N L-L

60 240 - 415

254 - 440

266 - 460

277 - 480

50 220 - 380

230 - 400

240 - 415

254 - 440

Hz L-N L-L

60 120 - 208

127 - 220

133 - 230

139 - 240

50 110 - 190

115 - 200

120 - 208

127 - 220

Hz L-N L-L

60 240

254

266

277

50 220

230

240

254

Hz L-N L-L

60 120

127

133

139

50 110

115

120

127

Hz L-N L-L

60 208 - 360

220 - 380

230 - 400

240 - 415

50 191 - 330

200 - 346

208 - 360

220 - 380

Hz L-M L-L

60 120 - 240

127 - 254

133 - 266

139 - 277

50 110 - 220

115 - 230

120 - 240

127 - 254


CONNECTIONS TO THE TERMINAL BOARD

Series High WYE (Series Star)

Series Delta

6 LEADS

Hz L-N L-L

60 240 - 415

254 - 440

266 - 460

277 - 480

50 220 - 380

230 - 400

240 - 415

254 - 440

Hz L-N L-L

60 240

254

266

277

50 220

230

240

254

TECHNICAL DRAWINGS AND DIMENSIONS E1X13S


TECHNICAL DRAWINGS AND DIMENSIONS E1X13M


TECHNICAL DRAWINGS AND DIMENSIONS SLS-SLT


TECHNICAL DRAWINGS AND DIMENSIONS PRO18


TECHNICAL DRAWINGS AND DIMENSIONS E1C13S-E1S13S


TECHNICAL DRAWINGS AND DIMENSIONS E1C13M-E1S13M


TECHNICAL DRAWINGS AND DIMENSIONS SP10


TECHNICAL DRAWINGS AND DIMENSIONS E1C10S


TECHNICAL DRAWINGS AND DIMENSIONS E1C10M


TECHNICAL DRAWINGS AND DIMENSIONS E1C11


TECHNICAL DRAWINGS AND DIMENSIONS E1S10M-L


TECHNICAL DRAWINGS AND DIMENSIONS E1S11


60HZ ALTERNATORS PRODUCTS CATALOG 2020_rev.1 / LINZ ELECTRIC Inc. reserves the right to implement modifications.


Find us on:North American Subsidiary:LINZ ELECTRIC INC.3005 Commercial Ave.Northbrook, IL 60062 - USAT.+1 (847) 595 [email protected]

Manufacturer:LINZ ELECTRIC S.P.A. Viale del lavoro 3037040, Arcole (Verona), Italy T.+39 (045) 7639 [email protected]

Documents

60HZ ALTERNATORS Product Catalog - Linz Electric€¦ · sinGle-phase brushless synchronous alTernaTors wiTh capaciTor: e1c13/4 13 General FeaTures 14 2 POLE ALTERNATORS ... kVA 3