Confidential and Proprietary Information of T-Mobile USA 1 10/1/2012

RF Assurance 6. Loading NCS/WNCS Files in ActixOne Paul Karam (RF Assurance Team) 10/28/11

Naming Convention of WNCS and NCS log files

Use “upload Non Drive test Data “ button to upload WNCS/NCS files

1 2

3 4

How to upload WNCS/NCS log files in ActixOne

Select the proper format (Ericsson WNCS or Ericsson NCS)

Specify region and market

Be sure of the naming convention before you upload

Show sectors that have WNCS enabled by going to Network layer -> attribute->carrier1->change the color to WNCS_loaded

Select on your specified sector

Go to Tools -> Channel Analysis You can change your settings by clicking on the upper setting button

WNCS ANALYSIS via Traffic analysis feature in ActixOne

In 1) you can see the recommendation values. In 2) you can see a comparison between what is currently configured and what is recommended. In 3) you can check the interference table.

3

2 1

Show sectors that have NCS loaded by going to Network layer -> attribute->carrier1->change the color to NCS_loaded

Select on your specified sector for analysis

Go to Tools -> Channel Analysis You can change your settings by clicking on the upper setting button

NCS ANALYSIS via Traffic analysis feature in ActixOne

In 1) you can see the recommendation values. In 2) you can see a comparison between what is currently configured and what is recommended. In 3) you can check the interference table. User can switch by analyzing BCCH, BSIC and TCH channels by clicking on the “handle parameter” button in the upper right corner.

2

1

3