55ccfb55bb61eb312b8b475d

ENGINEERING OF SUBSEA PRODUCTION SYSTEMS – Level 2

7 – 10 December 2015 | Singapore

Conducted by Course Directors

Professor Jean Luc Chasserot Technical director – Senior Consultant – S.P.S / S.U.R.F Azur Offshore Ltd

Here are what past participants have to say about this training: -

“This is an excellent course! I learnt a lot of subsea knowledge from this training.” Lead Facility Engineer, Chevron Indonesia

“Good material training with good capability and experience of the trainer.” Operations Specialist, Chevron Indonesia

“Very Subsea Engineer should attend this course.” Interface Engineer, Aker Solutions Malaysia

“A very comprehensive course covering almost all aspect of Subsea Engineering. It is also backed up with very good presentation materials” Principal Process Engineer, SBM Offshore

“This is a good course to attend. The lecturer have a lot of experience to share with the participants.” Geotechni & Structure Specialist, PT PERTAMINA

“An excellent training session with extended subsea technical consultation post training class.” Operations Assurance Advisor, Chevron

www.petroEDGEasia.net

Back by popular demand! 9th Run in Asia

ENGINEERING OF SUBSEA PRODUCTION SYSTEMS – LEVEL 2 7 - 10 December 2015 | Singapore

SUBSEA CONTROL SYSTEMS & UMBILICALS 27 - 30 October 2014 | Singapore

Train Your Whole Team At A Convenient Time And Location Through In-House Training. Call us at +65 6741 9927 to enquire or email your query to [email protected]. Visit us at www.petroedgeasia.net for more information.


Course Description This concise course is well balanced and based on more than 30 years of true project experience in Shallow and Deep Water fields around the world, from concept evaluation to first production. It is designed for Project Managers, Project Engineers, experienced or new to Subsea & highly suitable for Cost, Planning, Offshore Installation and Offshore Operation Engineers. All the Lectures (up-dated on a regular basis) are presented with text, figures and DVDs with videos and detailed animations, used to illustrate many key points of Subsea Technologies. The objective of the course is to equip Engineers and Technicians with a good understanding on the Engineering of Subsea Production Systems (SPS) together with Umbilicals, Risers and Flowlines (SURF) required to link and operate it from the Host. Course Highlights

Definition of Subsea Engineering for Field Developments / Floaters requirements

Field Lay-out and System Design

Flow Assurance Issues, Mitigation and Hydraulic Analysis

Well Heads and Xmas Trees

Templates, Manifolds and Subsea Hardware

Subsea Wells Operations and Work Overs

Inter Field Flowlines & Small Export Pipelines

Production Riser Systems for Floaters

Subsea Production Control Systems & Chemical Injection (including Umbilicals)

Reliability Engineering and Risk Analysis

Underwater Inspection, Maintenance & Repair

New technologies for S.P.S

3 Major case studies for Oil, Gas and Heavy Oil Production including updates from Total, Shell and BP

Who Should Attend

Engineers and Project Engineers who have recently come into the oil and gas industry or who have transferred from another discipline with only a basic knowledge of this key energy sector.

Industry personnel who will become part of, or need to have knowledge of multidisciplinary teams involved in Asian FPSO and Subsea projects: the managerial, engineering and financial specialists who determine project engineering priorities.

What our delegates had said about

this course

“Highly experienced trainer, one of a

kind!” Production Operation Engineer,

INPEX Corp

“Good overview of the factors that

affect subsea engineering.”

Project Engineer, Cameron Australasia

“The course is very good, useful and can

be used as a supported knowledge for

me to run my recent project.”

Development Engineer

ConocoPhillips Indonesia

“Excellent introductory course for

subsea engineering. Very experienced

training leader with excellent delivery”

Manager, Engineering/Design Category

Management, GSCM, PETRONAS

“Excellent” Production Engineer,

Kangean Energy Indonesia

“The philosophy and approach adopted

for the course is very practical and

educative” CEO

International Energy Services

“A good course covering overall SPS”

Subsea Engineer, INPEX

“Subsea engineers with Jean Luc’s

presentation skills combined with his

“all-rounder” knowledge are hard to

come by” Subsea Integrity Engineer,

ConocoPhillips

For more testimonials, visit us at

www.petroEDGEasia.net

mailto:[email protected]

http://www.petroedgeasia.net/







COURSE OUTLINE

DAY 1 0830hr Course Presentation, Objectives & Analysis of the Pre-Course

Questionnaires and Safety Brief

0900hr THE SUBSEA BUILDING BLOCKS, THE FLOATING HOSTS & THE FIELD ARCHITECTURE

L1 | INTRODUCTION TO OFFSHORE ENGINEERING, SUBSEA DEVELOPMENT OPTIONS & THE SUBSEA BUILDING BLOCKS Why subsea; Operators preferences; Current design philosophies; from BB1 to BB6 to New Subsea Technologies. From the most simple to the most complex field development.

L2 | INTRODUCTION TO FPSOS, OTHER FLOATING HOSTS & AROUND THE WORLD DEEPWATER REVIEW Spread moored & turret moored FPSO; in Shallow & deep waters around the world. Spar & Semi-sub TLP & mini TLPs, FDPSO? Etc…What is next with the Gas & Floating LNG (FLNG solutions to date)

L3 | FIELD ARCHITECTURE & LAYOUT – THE DICTATING FACTORS Specific Analysis of Lay-outs in shallow and deep waters in the North Sea, the GOM, offshore Canada and West Africa (Angola, Nigeria, Mauritania & Ghana) and Asia. From Reservoir configuration, to Subsea Wells locations and profiles, SPS and SURF equipment optimum positions and topside production for Oil, Gas, or Condensate process, storage & Export systems.

1230hr Lunch

1330hr SYSTEM DESIGN, FLOW ASSURANCE & CASE STUDY 1 – BP GREATER PLUTONIO

L4 | SYSTEM DESIGN REQUIREMENTS FOR WELLS, SPS / SURF & HOST INTERFACES From the Field Development Plan & the Basis of Design (B of D) to the Subsea Operation “Manual”. From Sub-surface requirements to Seabed and to Topside Processing, Controls and export options. Within an Integrated Project Team looking at early concepts, preferred solutions & to a fully operational, reliable total Production System.

L5 | FLOW ASSURANCE ISSUES, MITIGATION & PREVENTION METHODS From the early days in shallow waters to very complex situations today, in deep and ultra-deep waters for production of Oil Fields, Gas & Condensate Fields. What to do and not to do? Have we made mistakes? Yes & Why? What about the Cold points and rigid spools Vibrations? Simulations & Analysis.+ Experiences from various Operators. + L5 + TOTAL deep water constraints. A short pdf presentation in complement. + L5 ++ Flow Assurance Shell first OTC Paper after Malampaya Field detail design work.

CASE STUDY 1: BP ANGOLA BLOCK 18 GREATER PLUTONIO SUBSEA HUB PRODUCING INTO A LARGE FPSO Detailed review and analysis of training the offshore Operators at Level 1 with a purpose designed Training CD. After a slide presentation, a key points CD analysis will be made covering all the key issues any BP Operator needed to learn before going to work Offshore. A copy of the CD will be given to every Participant, for further in-house learning.

1730hr End of Day 1

DAY 2 0830hr WELLHEAD, XMAS TREES, TEMPLATES, MANIFOLDS &

WELL WORKOVER

L6 | SUBSEA WELLHEAD SYSTEMS AND GUIDE BASE Types of Wellheads; for Drilling and for Subsea Completions with a brief intro into drilling operations, setting the 30” Conductor, the guide base & the WH. Review of various equipments, installation sequence in shallow & deep waters, illustrated with animations.

L7 | SUBSEA X TREES FOR PRODUCTION, WATER INJECTION AND GAS PRODUCTION OR RE-INJECTION Types of Xmas Trees; with development history, Conventional Dual bore Vertical XTree VXT, Why the Horizontal XTree HXT was invented & now why the Drill Trough Horizontal Tree DTHXT with advantages and limitations. Reported problems.

L7 ++ Total K5F Field experience. All electric SPS using Cameron DC system (Rio Conf Report)

A review of all main Manufacturers Products, Main components, Testing and Installation sequence and typical Scope of Work for the Manufacturers.

If time, Animations of DTHXTs in use in the Dalia Field by Aker S & in the Jubilee Field by FMC.

L8 | SUBSEA WELL OPERATION AND MAINTENANCE Conventional Heavy Work-Over done by Rig, or low cost intervention by Well Service Vessel (W.S.V.) using Subsea Lubricator or the new technique by Expro with the Rigless AX-S system.

1230hr Lunch

1330hr SUBSEA “HARDWARE” FOR SPS & SURF + HISC & FLOWLINES PART 1

L9 | SUBSEA “HARDWARE”, TEMPLATES, MANIFOLDS AND CONNECTIONS With development history the need for templates or cluster/manifolds, daisy chains & intra-field Flowline connections or export pipelines in shallow & deep waters. Illustrated with animations & video sequences.

Manifold design for Production and other functions

Templates & Manifolds in shallow waters and planned for deep waters “in the old days”

Modular Template Manifold system by Kongsberg/FMC. Analysis of the Chinguetti Field

Piping materials, Valves & Chokes

Instrumentation, Sensors & Meters including MPFM and Fluid sampling

Flowlines connection systems. Advantages, limitations and potential problems

PLEM & FLET or PLET

HIPPS + L9 ++ Introduction to Materials, Valves & Chokes, Corrosion & Cathodic protection, etc

L10 | MANAGING HYDROGEN INDUCED STRESS CRACKING (HISC) History & Solutions A review of all main Manufacturers Products, Main components, Testing and Installation sequence and typical Scope of Work for the Manufacturers.

L11 | MULTIPHASE PUMPS & WET GAS COMPRESSORS Recent examples in Angola with the Pazflor Field & the GirRI Field. + In the Norwegian North Sea for Statoil Hydro/Shell Ormen Lange Field.

Footnote: Many points in the course will be illustrated with video sequences & animations from AOL DVD / CD collection









Day 2 continues…

L12 | PART 1: INTRA-FIELD FLOWLINES; SMALL EXPORT PIPELINES; SURVEYS & INTEGRITY MONITOR Design, route selection, Materials, Lay Techniques, Offshore Operation & Integrity Monitoring, Connections & Tie-Ins, Trenching & Protections and various Surveys.

1730hr End of Day 2

DAY 3 0830hr FLOWLINES P2, PIGGING, OTHER SEABED STRUCTURES &

RISERS. CS 2 DALIA FIELD

L12 | PART 2: INTRA-FIELD FLOWLINES Conventional single pipe flowlines, Pipe in pipe flowlines, Trace heated flowlines and Integrated Bundles. Flowlines Spools and Clusters Spools Connections. A review of solutions with advantages & limitations.

L13 | SUBSEA PIGGING SYSTEMS & OPERATIONS Loop pigging, Hybrid system using water injection combined with the production system and single line Subsea Pig launcher solution.

++Additional Presentation, showing Subsea Pigging Facilities in the Total Norway Skirne Field.

L14 | PRODUCTION (& INJECTION) RISER SYSTEMS FOR FLOATERS (FLEXIBLE, HYBRID TOWERS, SCRS) Different riser configurations, design, computer simulations, model testing, integrity monitoring, deep water solutions, installation procedures, various Hybrid solutions and performances, Steel Catenary Risers and latest FPSO applications in West Africa, Asia, Brazil & the GOM. Latest Optical Fiber flexible riser integrity monitoring solutions.

Case Study 2: In the Dalia Field; Flowlines and IPB risers for Total by Technip Angoflex.

Manufacture & Installation of Flowlines & Riser + Structures integrated with SPS in the Total Angola Dalia Field; Flowlines, rigid & flexible, flexible dynamic risers, PLEM, PLET, FLET, in line “T”, SLED, etc…

1230hr Lunch

1330hr SURVEYS, PRODUCTION CONTROLS & CHEMICAL INJECTIONS SYSTEMS, MAINTENANCE

L15 | SUBSEA SURVEYS & REPORTING Key stages of Seabed surveys, at Drilling stage, before design, before installation, during installation, after installation & during all the years of operation. Techniques and Reports being an important element of the “Subsea Data Base”.

L16 | SUBSEA PRODUCTION CONTROL & CHEMICAL INJECTION SYSTEMS. KEY INTERFACES. L16A | Overview and types of Control Systems; History of the

Technology and current solutions…

L16B | Functional Control Systems Requirements; Safety & Shutdowns, Flow control & monitoring…

L16C | Topside Equipments and Operators interfaces; MCS, VDU, UPS, ESD system, HPU…

L16D | Subsea Control Modules (SCM) & Interfaces; Architecture, Valves blocks, Accumulators, …

L16E | Sensors and Instrumentation; Down hole, Sand, Pig detectors, Gas leak, Integrity, Failures…

L16F | Control fluids and Injected Chemicals;

Day 3 continues…

L17 | SUBSEA PRODUCTION CONTROL SYSTEMS TESTING, OPERATION & MAINTENANCE Detailed Field Project Topside and Subsea Equipments installed in an operating Field, with various manufacturing testing key steps, the tools for testing, transportation, installation and subsea maintenance, including spares & storage requirements. With Aker Solutions materials.

1730hr End of Day 2

DAY 4 0830hr CONTROL & POWER UMBILICALS UNDERWATER I.M.R

& NEW SUBSEA TECHNOLOGIES

L18 | CONTROL UMBILICALS (SHALLOW & DEEP) & SUBSYSTEMS INTERFACE Complex and expensive life lines of any SPS / SUFR for reliable operation, flexible umbilicals are carrying small pipes for hydraulic power, subsea injected chemicals, power and signal electric cables but also high power cables to drive subsea pumps. Optical fibers are also incorporated. Connections at both ends are critical for maximum reliability and long operating life. They are static on seabed but dynamic in riser configurations. Materials are different for shallow or deep water applications. Various products & Manufacturers. Installation, connections & venting lines to deal with Hydrates problems. A must in any deep water SPS.

L19 | MAINTENANCE OF SUBSEA COMPONENTS, REMOTE INTERVENTION, UNDERWATER I.M.R How Control Modules & other critical components (meters, valves, sensors) are replaced underwater. With installation Animations, Methanol flooding and several Animations. In shallow waters and deep waters operations, during surveys, installation, pressure testing, hook-up, commissioning and production start-up. Regular Inspection, Maintenance & Repair (IMR) underwater operations & The Subsea Data Base management. ROV and AUV types and operations.

L19 ++ Total Presentation to explain the views of an Operator with ROVs and AUVs and future developments for Block 17.

L20 | NEW SUBSEA PRODUCTION TECHNOLOGIES Subsea processing systems in operation, Multiphase meters and All Electric SPS with the Total K5F Field example. Other developments and a brief presentation of Total’s Pazflor Field subsea production and processing systems for two Oil qualities on the same FPSO.

1230hr Course conclusion and presentation of Certificate of Attendance followed by Lunch

1330hr Departure for site visit

Site visit is included as part of the training. Participation is optional and subject to pre-approval by the facility management. 2-way transport with light snacks and bottle water will be provided. Facility will like be located in Malaysia - delegates joining site visit is responsible for arrangement of valid passport & travel VISAs into Malaysia.

1730hr End of Site Visit & return to hotel

++ Optional presentation or given lecture in the set of notes

L21 | INTRODUCTION TO SUBSEA RELIABILITY AND AVAILABILITY ENGINEERING In Subsea Projects, with materials from Prof John Strutt addressing the needs to incorporate Subsea Reliability at Design stage.

++ Introduction to New API RP 17N for Subsea Reliability and Asset Risk Management and BP Implementation of Subsea Reliability methodology.Flowlines connection systems. Advantages, limitations and potential problems

* Stipulated timing is subject to change in accordance to the progress of the training on a daily basis.









Your Expert Course Director: TPA Professor Jean-Luc Chasserot BSc . MSc (J.L.C) Started to work for the Energy Industry in 1972, after qualifying in Mechanical Engineering (BSc) & Industrial Engineering (BSc) in France. Worked on design & construction of several LNG carriers in French & US Shipyards Returned to France in 78 to join Comex Seal/Industrie to move to Aberdeen and work on Saturation Diving Systems and ROVs.

Joined A.O.L. in Jan 83 to work in London on new field development Projects. Seconded to various Operators for:

83/ 85 BALMORAL Field for Sun Oil UK-New Semi FPV & large SPS/Pipeline system. Involved from system design up to offshore HUC.

86 / 88 Various short involvements on Glamis, Draugen FPV for Aker/Shell, GASP R&D subsea separation, Emerald, FROY for Elf Norge, Shell Brent ESDVs, TONI SPS for Agip UK and LYELL SPS / Intra field Flowlines & Umbilicals for tie-back to Ninian Host platform for Conoco.

89 / 94 ALBA Field for CHEVRON UK– Pipeline / Subsea supervisor – Northern Platform and New Floating Storage.Involved from conceptual design up to first oil start-up and troubleshooting offshore. AN Platform to FSU internal turret, pipeline bundle and provision for South subsea development.

95/ 96 SCOTT / TELFORD Subsea tie-back for Hamerada Hess / Laing Oil & Gas. Special retrofit multi riser system, including offshore work.

Mid 96 /Mar 98 OTTER Field FINA UK – Subsea engineering manager responsible for FEED, detail design & bids. Simple SPS to FPSO or Tie-back.

98 / 00 Cameron France SA for ELF Angola, GIRASSOL Field, Senior Project Engineer based in Pau & Beziers looking after Hybrid riser,SPS,etc..

DALIA FEED + prequalification and evaluation of novel Drill Through Horizontal XTrees. Drilling cost savings.

Also worked in Houston & Singapore on the Shell Philippines MALAMPAYA Field to sort out the Field Architecture, System Design, the F.A. issues , the FEED and started Detail Design. Later on, monitored the SIT in Singapore.

Mid 00 / 04 Various missions for A.O.L. in Australia / Singapore / Paris / Malaysia / Sarawak assisting clients in field development studies & training.

Mid 04 / Feb 05 Senior Project Engineer / Auditor on TIOF Field studies for WOODSIDE Mauritania.in Perth & Nouak up to contract award.

05/06 Assisted BP Operations on GREATER PLUTONIO Field to develop the Operation Manual (on CD) level one, for large SPS/Lines & FPSO.

06/ Feb 07-2nd mission in Pau, to assist Total Angola on DALIA field development, deep water, world largest SPS / FPSO with 71 Subsea Wells for Production, Water Injection & Gas disposal. Also worked with all Package Managers to Prepare 7 Papers for OTC Conference - May 07.

Apr 07 to Sep 09; assisted Petronas Carigali on 1st subsea gas tie-back K5 pilot project to wellhead platform and trained new group of Subsea / Offshore Engineers. Assisted Petronas Mauritania on Chinguetti FPSO replacement evaluation and engineering of W.O. operations.

From Jul 09, developed Malaysia operations with JV Partner, SLT International in Kuala Lumpur (FLNG bid INPEX)

March10 / May12 Organised & delivered Six SUT Africa Branch 5 days Subsea Engineering Courses in Nigeria, Angola & Ghana.

For the past 26 years, regular lecturer in Offshore and Subsea Engineering at various engineering Schools / Universities in UK and France. OTHER QUALIFICATIONS; UK S.U.T. Certified / Registered Subsea Engineer in 88. Fellow in 1992 – elapsed - Cranfield Institute modular MSc in 87/88. Fellowship of Cranfield University awarded in 96. Made TPA “Total Professeurs Associés” in Oct 2006 to present Lectures in Subsea / FPSO DeepWater Field Developments

2013 / 2014 Recently involved with Subsea Consultancy work in Ghana, France and Canada. Continued with Subsea and FPSO courses with Asia Edge and Cranfield University.









petroEDGE® delivers energy industry skills-based training courses in major cities around Asia, catering for every stage of your organisation’s development path. Since our inception, we have provided wide range of management development training, business strategy and technical skills training courses to over 100 leading international corporations and government establishments. Our growing client profile:

Almansoori Wireline Services (Thailand) Maersk Drilling PT Perusahaan Gas Negara

Arabian Bridge Company for Oil Services Maersk Oil Qatar PT PLN (Persero) Kantor Pusat

Asetanian Marine Pte Malakoff Corporation Berhad PTT Exploration & Production

Bangladesh Oil, Gas & Mineral Corp Malaysia LNG PTTEP International Limited

Bergen Group ASA Malaysia Marine & Heavy Engineering PTTEP Iran Company Limited

BG Exploration and Production India Malaysia-Thailand Joint Authority PTTEP Oman Company

BJ Services Company Middle East Media Chinese International PVD Offshore Services Co.

BP Exploration & Operating Vietnam Mid-Continent Equipment Group Pte Ranhill Engineers & Constructors

BP Exploration Operating Company MISC Berhad Rhodia Asia Pacific Pte

BP Indonesia / Singapore & Vietnam Mitsui Oil Exploration Co. Repsol

Brunei LNG MMS (Insurance Brokers) Royal Norwegian Embassy

Brunei Petroleum Murphy Oil Corporation Sabah Shell Petroleum Co

Brunei Shell Petroleum Co National Healthcare Group Sapura Energy

Cairn Energy India Pty Nations Petroleum (SE Asia) Sapuracrest Petroleum Berhad

Carigali Hess Operating Co. Newfield Peninsula Malaysia Inc. Sarawak Shell Berhad

Carigali PTTEPI Operating Company Nipon Oil Exploration (Malaysia) Saudi Arabian Oil Company

CGG Veritas (M) Oceaneering International Saudi Basic Industries Corp

Charnavon Petroleum Offshore Geo-Surveys Schlumberger Oilffield (S) Pte

Chevron Asia South Optimal Chemicals (M) Scomi Oiltools

Chevron Thailand E & P Optimal Olefins (M) Shell Eastern Petroleum

CNOOC PC Vietnam Shell MDS (Malaysia)

Cuulong Joint Operating Company PCPP Operating Company Shell Saudi

Det Norske Veritas (DNV) As Pearl Energy (Nam Conson) Sime Darby Plantation Sdn Bhd

Det Norske Veritas Pte PERMATA Singapore Petroleum Co.

Dof Subsea Australia Pty Permata - PMTSB SN Aboitiz Power

DPS Bristol (M) Pertamina Learning Center S-Oil Corporation

Esso Malaysia Berhad PetroEnergy Resources Corp. Talisman Malaysia

ExxonMobil E & P Malaysia Inc. Petrofac Malaysia Limited Tately N.V.

First Gas Power Corporation Petroleum Insitute of Thailand Technip Geoproduction (M)

Genting Oil & Gas Petroleum Well Logging Co. Teknik Janakuasa

Geomechanics International Petrolux Temasek Holdings Pte

Greatwall Drilling Company PETRONAS Holdings Tenaga Nasional Berhad

Halliburton Energy Services, Inc. PETRONAS Carigali Thang Long JOC

Hercules Tanjung Asia PETRONAS Carigali Vietnam Limited TL Offshore

Hess (Thailand) Limited Petronas Dagangan Berhad Total (China) Investment Co. .

Hoang Long Hoan Vu JOC PETRONAS Gas TOTAL E&P Indonesia

Intisari Oildfield Service PETRONAS Methanol (Labuan) Trans Thai Malaysia

Intra Oil & Services Bhd PETRONAS Penapisan (Melaka) Transwater API

Japan Vietnam Petroleum Compan Petrousaha Engineering Services Tri-M Technologies (S)

Kavin Engineering & Svcs Pte Petrovietnam Drilling & Well Services Truong Son JOC

Kebabangan Petroleum Operating Co. Powertium Marine UMW Standard Drilling

KUFPEC Regional Ventures (Indonesia) Premier Oil Indonesia University New South Wales

Lam Son JOC PT Halliburton Indonesia Vastalux

Lion Rig Builder Pte PT Medco E&P Indonesia Vinyl Chloride (Malaysia)

Lundin Malaysia B.V. PT Pertamina (Persero) Head Office YTL Power International Berhad









ENGINEERING OF SUBSEA PRODUCTION SYSTEMS – LEVEL 2

R E G I S T R A T I O N F O R M

EARLY BIRD NORMAL TEAM DISCOUNTS

SINGAPORE 7 – 10 December 2015

SGD 3,799 SGD 3,999

petroEDGE recognises the value of learning in teams. Group bookings at the same time from the same company receive the following: 3 or more at 5% off 5 or more at 7% off 8 of more at 10% All other promotions including early bird are exclusive of the group discount.

Site visit is included as part of the training. Participation is optional and subject to pre-approval by the facility management. 2-way transport with light snacks and bottle water will be provided. Facility will like be located in Malaysia - delegates joining site visit is responsible for arrangement of valid passport & travel VISAs into Malaysia.

DELEGATE DETAILS Delegate 1

Please note - Indicate if you have already registered by Phone +Fax

+Email +Web - If you have not received an acknowledgement before the

training course, please call us to confirm your booking. - Photocopy this form to register multiple delegates.

PAYMENT METHODS By Cheque/ Bank Draft Make Payable to Asia Edge Pte. Ltd.

By Direct Transfer Please quote your invoice number with the remittance advise Account Name: Asia Edge Pte. Ltd. Bank Number: 508 Account Number: 762903-001 Swift Code: OCBCSGSG

All bank charges to be borne by payer. Please ensure that Asia Edge Pte Ltd receives the full invoiced amount.

PAYMENT POLICY Payment is due in full at the time of registration. Full payment is mandatory for event attendance. By submitting this registration form, you have agreed to Asia Edge Pte Ltd’s payment terms

CANCELLATIONS & SUBSTITUTIONS You may substitute delegates at any time. ASIA EDGE PTE LTD does not provide refunds for cancellations. For cancellations received in writing more than seven (7) days prior to the training course you will receive a 100% credit to be used at another ASIA EDGE PTE LTD training course for up to one year from the date of issuance. For cancellations received seven (7) days or less prior to an event (including day 7), no credits will be issued. In the event that ASIA EDGE PTE LTD cancels an event, delegate payments at the date of cancellation will be credited to a future ASIA EDGE PTE LTD event. This credit will be available for up to one year from the date of issuance. In the event that ASIA EDGE PTE LTD postpones an event, delegate payments at the postponement date will be credited towards the rescheduled date. If the delegate is unable to attend the rescheduled event, the delegate will receive a 100% credit representing payments made towards a future ASIA EDGE PTE LTD event. This credit will be available for up to one year from the date of issuance. No refunds will be available for cancellations or postponements.

ASIA EDGE PTE LTD is not responsible for any loss or damage as a result of a substitution, alteration or cancellation/postponement of an event. ASIA EDGE PTE LTD shall assume no liability whatsoever in the event this training course is cancelled, rescheduled or postponed due to a fortuitous event, Act of God, unforeseen occurrence or any other event that renders performance of this training course impracticable or impossible. For purposes of this clause, a fortuitous event shall include, but not be limited to: war, fire, labor strike, extreme weather or other emergency.

PROGRAM CHANGE POLICY Please note that speakers and topics were confirmed at the time of publishing; however, circumstances beyond the control of the organizers may necessitate substitutions, alterations or cancellations of the speakers and/or topics. As such, ASIA EDGE PTE LTD reserves the right to alter or modify the advertised speakers and/or topics if necessary. Any substitutions or alterations will be updated on our web page as soon as possible.

ASIA EDGE PTE. LTD. Company Registration No: No. 200710561C Copyright@ 2005 ASIA EDGE PTE LTD. All rights reserved.

Mr Ms Mrs Dr Others:

Name :

Job Title :

Department :

Telephone No. :

Email :

Delegate 2

Mr Ms Mrs Dr Others:

Name :

Job Title :

Department :

Telephone No. :

Email :

Company :

Address :

Country : Postcode:

Attention Invoice to :

Telephone No. :

Fax No. :

4 EASY WAYS TO REGISTER

Online: www.petroedgeasia.net Email: [email protected] Phone: +65 6741 9927 Fax: +65 6747 8737





Documents

55ccfb55bb61eb312b8b475d