505

MICRON EXTRA 2.5 L 750 mlBlack 175240 YBA994/2.5 175242 YBA994/750Blue 175223 YBA920/2.5 175225 YBA920/750Dover white 175220 YBA904/2.5 175222 YBA904/750Green 175226 YBA924/2.5 175228 YBA924/750Grey 175236 YBA964/2.5 175237 YBA964/750Navy 175229 YBA929/2.5 175231 YBA929/750 Red 175232 YBA944/2.5 175234 YBA944/750Coverage 25m2/2.5 L 7.5m2/750 ml

Micron® Optima

The ultimate performer in eroding antifoulingswith revolutionary activator and new resinsystem for unparalleled effectiveness over a fullseason. Solvent free for easy clean up.Contains Copper Oxide and Zinc PyrithioneThinners: Water

Cruiser® Uno

One coat antifouling formulated for both power and sailing boats (up to 25 kts). One season's antifoulingprotection from one application. Can be immersed the same day. Compatible with most antifoulings,no need to be sanded before reapplication. Not compatible with VC systems.Contains Copper Oxide and Preventol A4S. Thinners No.3

Micron® Extra

High strength, self-polishing antifouling thatprovides up to 2 seasons protection in high foulingareas from one application (3 coats). Improvedresin system offers more time between applicationand immersion – up to 12 months. Contains Biolux.Contains Copper Oxide and Preventol A4SThinners No.3

CRUISER UNO 3 L 2.5 L 750 mlBlack 175160 YBA295/3 175159 YBA295/2.5 175161 YBA295/750 Blue 175148 YBA210/3 175147 YBA210/2.5 175149 YBA210/750 Navy 175152 YBA234/3 175151 YBA234/2.5 175153 YBA234/750Red 175157 YBA255/3 175156 YBA255/2.5 175158 YBA255/750 White 175144 YBA203/3 175143 YBA203/2.5 175145 YBA203/750 Coverage 25.5m2/3 L 21.3m2/2.5 L 6.4m2/750 ml

Trilux

Bright coloured medium performance, hard antifouling suitable for all substrates including aluminium.Offers protection in medium conditions where a hard, scrubbable antifouling is required. Ideal for fastpowerboats and dry sailed craft. Contains Biolux. Also suitable for propellers, outdrives and sterngear.Contains Copper Thiocyanate and Preventol A4S. Thinners No.3

TRILUX 2.5 L 750 ml 375 mlBlack 175197 YBA591/2.5 - - 175198 YBA591/375Blue 175188 YBA515/2.5 - - 175189 YBA515/375Grey 175195 YBA563/2.5 - - 175196 YBA563/375 Scarlet 175192 YBA550/2.5 - - 175193 YBA550/375 Green 175191 YBA521/2.5 - - - -White 175184 YBA508/2.5 175187 YBA508/750 175185 YBA508/375Coverage 26.3m2/2.5 L 7.9m2/750 ml 3.9m2/375 ml

Optimum Performance

Very Strong

Strong

Moderate

Mild

Aluminium

Steel

Wood

Glass Fibre

Above Water

Below Water

Ideal for High Speed Craft

ANTIFOULING

MICRON OPTIMA 2 LBlack 175239 YBA993/2White 175219 YBA903/2Light blue 175238 YBA973/2Red 175235 YBA953/2Coverage 16.6m2/2 L

ANTIFOULING – cont’d

506

WATERWAYS PLUS 2.5 LBright red 183713 YBA365/2.5Mid blue 183714 YBA364/2.5 Coverage 21.3m2/2.5 L

Waterways Plus

A copper based antifouling formulated for use infresh and brackish water. Waterways Plus canbe applied several weeks before immersion,which makes it an ideal product for hire fleetoperators and inland waterway users.Contains Copper Oxide and Zineb.

Interspeed Ultra

No longer just extra strong, a new, improvedformula makes this superior antifouling ultrastrong. It is ideal for high-speed craft or craft ondrying and mud berths. Can be burnished.Contains Biolux. Contains Copper Oxide andPreventol A4S. Thinners No. 3.

VC Offshore with Teflon®

VC Offshore with Teflon® is a high strengthantifouling with Teflon® which dries to a smooth,hard, scrubbable finish, ideal for racing and sailing boats. VC Offshore with Teflon® was chosen by some of the leading contenders for the Volvo Ocean Race 2001/2.Contains Copper Oxide and Preventol A4S. Thinners : VC General Thinner.

VC OFFSHOREWITH TEFLON® 2 L 750 ml

Black 175210 YBA797/2 175211 YBA797/750Blue 175204 YBA717/2 175205 YBA717/750Red 175206 YBA747/2 175207 YBA747/750Shell white 175202 YBA707/2 175203 YBA707/750Coverage 21.6 m2/2 L 8.1 m2/750 ml

VC 17M EXTRA 2 L 750 mlGraphite 181931 YBA762/2 181932 YBA762/750Bright White 181933 YBA766/2 181934 YBA766/750Fluo-Orange - - 181935 YBA769/750Coverage 22 m2/2 L 8.3 m2/750 ml

VC 17M Extra

10 times thinner than traditional antifouling new VC 17M Extra avoids the age-old problemof “build up” of antifouling. Because it containsTeflon®, VC 17M Extra antifouling has a supersmooth, fast surface without requiring sanding,which minimises drag. This new formulation is suitable for both cruising and racing boats.Contains Copper Metal, Copper Thiocyanateand Zinc Pyrithione. Thinners : VC General Thinner.

Prop-O-Drev PrimerHard antifouling specially formulated for use onoutdrives outboard legs, propellers and sterngear. Aerosol spray is ideal for painting awkward shapes and difficult to reachareas. Quick and easy application saves youtime and effort. Suitable for use on aluminium and stainless steel.

Trilux Prop-O-Drev

A low-friction antifouling with Teflon®. It is ideal for use on outdrives,propeller’s, trim tabs etc, where the aerosol container ensures easyapplication of the antifouling to awkward areas. It is suitable for useon aluminium. Contains Copper Thiocyanate. Thinners : VC General Thinner.

TRILUX PROP-O-DREV/VC PROP-O-DREV PRIMER 500 ml

Black 175212 YBA798/500Grey 175209 YBA768/500

PRIMOCON AEROSOL 300 ml

183720 YPA688/300

INTERSPEEDULTRA 2.5 L 750 ml

Black 175182 YBA393/2.5 175183 YBA393/750Blue 175171 YBA333/2.5 175172 YBA333/750 White 175163 YBA303/2.5 175164 YBA303/750Grey 175179 YBA363/2.5 175180 YBA363/750 Light blue 175169 YBA331/2.5 175270 YBA331/750Princess grey 175181 YBA366/2.5 - -Green 175167 YBA323/2.5 175168 YBA323/750Red 175174 YBA341/2.5 175175 YBA341/750 Coverage 23.5m2/2.5 L 7m2/750 ml

507

VARNISHES

Schooner A traditional tung oil based yacht varnish for classic yachts, suitable forall internal and external wood. Schooner contains UV absorbers for along lasting finish and its easy to brush formulation gives a deep, rich gloss.Thinners No. 333

Perfection Varnish High performance 2-pack polyurethane varnish. Very high gloss. The ultimate product for durability, gloss-retention and UV-resistance. Apply over bare wood, existing 2-pack varnish or UCP.Thinners No.9

Original A conventional general purpose yacht varnish with good gloss retention,UV filters and excellent non-blooming qualities. Easy to apply over anytype of existing varnish and easy to re-coat. It is suitable for interior andexterior use, whatever the construction.Thinners No.1

Goldspar Satin Tough, abrasive resistant, UV resistant and fast drying, Goldspar Satinoffers the same features of its gloss counterpart, but dries to a beautifulsatin finish. Primarily for interior use.Thinners No. 1

UCPA universal clear primer for bare wood.Exceptional adhesion properties make itideal as a primer to be overcoated bymost International finishes or varnishes.Note: Do not use in conjunction with Intertox.Do not use on oily wood.Thinners No. 9

SCHOONER750 ml 375 ml

175379 YVA086/750 175378 YVA086/375Coverage 10.5 m2/750 ml 5.25 m2/375 ml

GOLDSPAR 750 ml 375 ml

175384 YVA213/750 175383 YVA213/375Coverage 9 m2/750 ml 4.5 m2/375 ml

ORIGINAL2.5 L 750 ml 375 ml

175380 YVA202/2.5 175382 YVA202/750 175381 YVA202/375Coverage 29.3 m2/2.5 L 8.8 m2/750 ml 4.4 m2/375 ml

GOLDSPARSATIN

2.5 L 750 ml 375 ml175385 YVA251/2.5 175387 YVA251/750 175386 YVA251/375

Coverage 25.8 m2/2.5 L 7.7 m2/750 ml 3.86 m2/375 ml

GoldsparThis internationally renowned varnish gives a full gloss polyurethanefinish. It is easy to use and dries quickly making it ideal when fastovercoating is necessary.A hard varnish, it is abrasion resistant and can be used over existingvarnish. Its new improved formula incorporates enhanced UV filters.Thinners No. 1

SIKKENS CETOL 750 mlNatural 175113 IVA300/750Teak 175114 IVA310/750Light 183721 IVA315/750Coverage 7.5 m2/750 ml

UCP375 ml

175347 YPA600/375Coverage 6.6 m2/375 ml

Sikkens Cetol MarineTransparent satin impregnatingoil/varnish based on a modified alkydresin. Beautifully emphasises the wood grain.Easy application suitable for use ontropical hard wood. A primer and finish on teak decks andother wooden parts. Use for exteriorwork above the waterline.Thinner: Sikkens AK

IntertoxUnique clear preservative with 2 activebiocides to protect against wet and dryrot and fungal stains.To be used on bare wood. Note: Do not use in conjunction with UCP.Do not use on oily wood.Thinners No.1

INTERTOX1 L

175298 YMA117/1Coverage 8-12 m2/1 L lt *

PERFECTION VARNISH750 ml

175389 YVA853/A750Coverage 8.3 m2/750 ml

* depending on porosity of wood

FINISHES& UNDERCOATS

PerfectionA 2-pack high performance polyurethane,providing extremely durable gloss that will last up to 5 years. Can be used on wood GRP, steel and aluminium (alloy) over appropriate primers. May only be applied over existing 2-pack paints, 2-pack primers, Perfection Undercoat of UCP. Thinners No.9.

BrightsidePremium 1-pack polyurethane topside glosspaint. Its Teflon® containing formula producesa hardwearing, scratch resistant, easy cleansurface. Fast drying.Flow Agent 333 / Thinners No. 1

TOPLAC 750 mlAtlantic grey 289 175281 YKF684/750 Baltic blue 163 175278 YKB914/750 Bondi blue 016 175288 YKU898/750 Bounty 350 175283 YKJ292/750 Danube blue 104 175280 YKE938/750Donegal green 077 175287 YKT541/750Ivory 812 175275 YKA187/750 Jet black 051 175289 YKY999/750 Landerdaule blue 936 175286 YKS936/750 Mauritus blue 018 175282 YKF991/750 Med. White 545 175274 YKA184/750Oxford blue 105 175279 YKB993/750 Rochelle red 011 175285 YKS299/750 Rustic red 501 175290 YKZ501/750Snow white 001 175277 YKB000/750Yellow 101 175284 YKS101/750

Coverage 9m2/750ml

BRIGHTSIDE 2.5 LClipper White 003 175246 YDB003/2.5 White 001 175243 YDB000/2.5

Coverage 33.8m2/2.5 L

BRIGHTSIDE 250 mlBlack 051 175262 YDY999/250 Fire Red 504 175254 YDC286/250 Largo Blue 946 175251 YDB946/250 White 001 175244 YDB000/250

Coverage 3.375m2/2.5 L

508

ToplacPremium 1-pack topside gloss paint. A high performance formulation, it will retain its colour and gloss up to 3 times longer than conventional gloss paint. Flow Agent 333 / Thinners No. 1

PERFECTION 750 mlPlatinum A183 181936 YHA183/750Mediterranean White A184 181937 YHA184/750Off White A192 181938 YHA192/750Royal Blue A216 181941 YHA216/750Snow White B000 181943 YHB000/750Jade Mist Green B663 181944 YHB663/750Mauritius Blue F991 181945 YHF991/750Flag Blue K990 181946 YHK990/750Fighting Lady Yellow S056 181947 YHS056/750Cream S070 181948 YHS070/750Chilli Red 185563 YHE294/A750Rochelle Red S299 181949 YHS299/750Jet Black Y999 181950 YHY999/750

Coverage 9m2/750ml

TOPLAC 2.5 LMed. white 175273 YKA184/2.5Snow white 175276 YKB000/2.5Bounty 181953 YKJ292/2.5Donegal Green 181954 YKT541/2.5Mauritius Blue 181952 YKF991/2.5Oxford Blue 181951 YKB993/2.5

Coverage 30m2/2.5 L

BRIGHTSIDE 750 mlBlack 051 175263 YDY999/750Beige 090 175259 YDG090/750Clipper White 003 175248 YDB003/750 Fire Red 504 175255 YDC286/750 Flag Blue 990 175261 YDK990/750 Largo Blue 946 175252 YDB946/750 Norfolk Green 241 175257 YDD583/750 Rescue Orange 265 175256 YDD265/750 Cream 027 175253 YDC089/750 Sapphire Blue 830 175249 YDB830/750 Seattle Grey 251 175258 YDF051/750 Snow White 001 175245 YDB000/750 Squall Blue 923 175250 YDB923/750

Coverage 10.1m2/750ml

InterdeckSpecially formulated anti-skid deck paintdesigned for use over all suitably primedsubstrates. Contains a fine aggregate. Low sheen finish.Thinners No. 1

Matting additiveA matting solution for mixing withInternational Paint finishes and varnishes toproduce a satin or matt effect finish. A 1:1 mix with Toplac produces a similar glosslevel to Goldspar Satin varnish. May be added up to 25:75 by volume for aflat-matt finish.For interior and exterior use.

MATTING ADDITIVE 750 mlOne-pack Matting Additive 175319 YMA715/750Two-pack Matting Additive 183736 YZM914/750

INTERDECK 750 mlWhite 001 175267 YJB000/750 Beige 090 175272 YJG090/750 Cream 027 175270 YJC089/750Grey 289 175271 YJF684/750 Pale Blue 339 175268 YJB339/750Squall Blue 923 175269 YJB923/750 Coverage 7 m2/750 ml

DanbolineHigh opacity bilge paint withexcellent coverage. Ideal forbilges and engine bays.

Thinners No. 1.

Pre-KoteUndercoat for Toplac, Brightside, Interdeckand Danboline. Excellent covering powerallows for easy colour changing.

Thinners No.1.

Perfection undercoatA high performance extremely tough, longlasting 2-pack undercoat for use underPerfection gloss. May only be applied overexisting 2-pack finishes or primers, UCP orbare GRP. White may be tinted with up to10 % of Perfection gloss to achieve a rangeof colours.

Thinners No.9.

Non-Slip additiveFor addition to International Paint gloss finishes and varnishes to provide a non-slip surface. Non-Slip Additive is effectively colourless when mixed into paint, so no change in shade should be observed.1 sachet per 750 ml paint.

DANBOLINE 2.5 L 750 ml

Grey 175293 YMA100/2.5 175294 YMA100

/750

Red - - 175295 YMA101/750

White 175296 YMA102/2.5 175297 YMA102

/750 Coverage 27 m2/2.5 L 8.25 m2/750 ml

PRE-KOTE 2.5 L 750 ml 375 mlBlue grey879 - - 175377 YUG879

/750 - -

White001 175374 YUB000

/2.5 175376 YUB000/750 175375 YUB000

/375 Coverage 30 m2/2.5 L 9 m2/750 ml 4.5 m2/375 ml

PERFECTION UNDERCOAT 750 mlBlue 302 175358 YRA302/750 White 001 175357 YRA003/750 Coverage 9 m2/750 ml

NON-SLIP ADDITIVE 20 mg175320 YMA905/1

509

PRIMERS

YACHT PRIMER 2.5 L 750 mlGrey 175338 YPA275/2.5 175339 YPA275/750Coverage 30m2/2.5 L 9m2/750ml

ETCH PRIMER 500 mlOrange 175333 YPA110/500Coverage 9m2/500ml

PRIMOCON 2.5 L 750 mlGrey 175354 YPA984/2.5 175356 YPA984/750Coverage 18.5m2/2.5 L 5.6m2/750ml

INTERPROTECT 2.5 L 750 mlGrey 175343 YPA403/2.5 175345 YPA403/750White 175340 YPA400/2.5 175342 YPA400/750Coverage 20.3m2/2.5 L 6m2/750ml

Yacht PrimerGeneral purpose primer for use on wood, steel andalloy above water. Replaces Metallic Pink Primer forabove water application. Thinners No. 1

Etch PrimerA primer for the effective pre-treatment of alloy surfaces.Apply one coat only.Thinners No. 7

PrimoconA quick drying, general purpose below waterlineprimer, ideal for metal keels and hulls prior toantifouling, or for use as a barrier/sealer coat betweenunknown or incompatible antifoulings. ReplacesMetallic Pink Primer for below water application.Thinners No. 3

InterprotectHigh performance, 2-component, quick drying epoxybased primer for high performance paint schemes onall rigid substrates.Thinners No. 7

THINNERS

1 litre 175369 YTA600/1

500 ml175108 ITA100/500

VC General ThinnerThinner and equipment cleaner for VC products. Can also be used to remove VC 17 m.

Sikkens AK ThinnerGeneral purpose thinner and equipment cleaner for Sikkens one pack wood care products.

510

Type 1 litre 500 ml Description - Use

Thinner No.1 175370 YTA800/1 175371 YTA800/500 General purpose thinner and equipment cleaner for 1-pack paints and varnishes (except Brightside).

Thinner No. 3 175366 YTA085/1 175367 YTA085/500 Thinner and equipment cleaner for antifoulings (except VC). Not suitable for thinning Micron Optima.

Thinner No. 7 175364 YTA061/1 - - Thinner and equipment cleaner for epoxy-type International Paintproducts.

Thinner No. 9 175363 YTA006/1 - - Thinner and equipment cleaner for 2-pack polyurethane-typeInternational Paint products and UCP.

Thinner No. 10 175365 YTA063/1 - - For use with 2-pack polyerethanes and for spraying 1-pack varnishes and finishes where a faster thinner is required.

Flow Agent 333 - - 175368 YTA333/500 Premium flow-agent for thinning Brightside and other 1-pack paints and varnishes.

511

Epiglass – Epoxy rEsin systEms

osmosis trEatmEnt & protEction

model Description – Use

a Epiglass Diy pack

1.2 kg pack International Paint’s Epiglass® HT9000 system is a versatile epoxy resin system suitable for a wide variety of uses on boats of all types. In addition to the high strength and durability associated with epoxy resins, this unique and easy to use 4 :1 mix ratio formula offers very special features. Kit comes complete with 3 mixing cups.

175133 YAA900/AF1.2

B

Epiglass projEct pack 3.75 l

Fast cure 175135 YAA900/F3.75

standard cure 175137 YAA900/S3.75

Ht55 DispEnsing pUmp 3.75 l Pump avoids spillage and contact of the resin and hardener with skin when mixing ; an important factor when using epoxy materials.pump set 175392 YXA053/1

c Ht901 Epoxy solvEnt500 ml Epiglass® Epoxy Solvent has been formulated for use with Epiglass® Epoxy Resin in surface preparation

and equipment cleaning. Epoxy Solvent should be used for wiping down surfaces prior to application of resin, glue or fairing mixes.175372 YTA901/500

D Ht220 WooD FiBrEs1 litre/175 gm This is a white cellulose fibre designed for adding to glue mixes when bonding wood and especially

for fillet bonding.175395 YXA220/175

E Ht110 glUE poWDEr

1 litre/50 gm This extender produces a high strength epoxy glue when mixed with the Epiglass® resin mix. The viscosity of the glue can be varied by the volume of Glue Powder added. Glue Powder should be added to the filling and fairing mixes to improve trowelling and feather properties and to prevent sagging.183813 YXA110/50

a B c D E

model Description – Use

a

gElsHiElD 200 750 ml 2.5 lQuick drying, high performance, 2-component epoxy for application to sound gelcoats to help protect against “osmosis”. Provided in two shades (green and grey) to ensure complete coverage. Suitable for use in temperatures down to 5oC. Thinners No. 7

green 175335 YPA212/50 175334 YPA212/2.5

grey 175337 YPA213/750 175336 YPA213/2.5

Coverage 6m2/750ml 20.3m2/2.5 L

B

vc tar2 1 l 2.5 l2-component epoxy primer which protects against osmosis in GRP and provides anti-corrosive protection on steel and alloy. Provides a smooth surface without sanding. Compatible with VC Tar.Thinners : VC general thinners

Black 175264 YEA729/1 175265 YEA729/2.5

off white 183814 YEA728/1 183815 YEA728/2.5

Coverage 11.3m2/1 L 28.3m2/2.5 L

a B

512

Fillers

sPeCiAls

BOAT CAre rANGe

Model Description – Use

A TeAk resTOrer500 ml 1 l Restorer/brightener for old and dirty hardwoods. Cleans and restores teak and other hardwoods to new.

Does not damage GRP, varnish, paintwork or aluminium. For use on any interior or exterior hardwood. Finish with Teak Oil.175316 YMA640/500 -

BliqUiD rUBBiNG

175311 YMA625/500 -Gloss restorer for paintwork and GRP. Rubbing liquid for removing marks and yellowing, and for restoring gloss to painted surfaces and GRP. For manual or slow machine use (800-1000 rpm).Free from wax and silicone oils. Low Odour.

CGelCOAT sTAiNreMOver

175310 YMA622/500 -High strength GRP cleaning gel. Easy to use deep penetrating gel which dissolves stains and marks on GRP like waterline or exhaust pipe stains. Will not run when applied on vertical surfaces.

DsUPer CleANer

175309 YMA620/500 -High strength cleaner for use on GRP and painted surfaces to remove wax, oil, grease and dirty marks. First stage of surface preparation prior to painting. Biodegradable.

eBOAT shAMPOO

185579 YMA620/500 185578 YMB621/1 Universal cleaner for use on most surfaces. Will not remove wax and leaves a shiny water repellant surface. Can be used with salt water, making it convenient to use anywhere.

F POlwAx 175312 YMA635/500 -Cleaner, polish and wax in one. For quick and easy cleaning, polishing and waxing of oxidised GRP and painted surfaces. Free from silicone oils. Low odour. For manual or machine use (800-100rpm).

GPOlishwiTh TeFlON®

175313 YMA636/500 -Ultimate quality polish with Teflon® containing wax for paintwork and GRP, providing a high gloss finish. Excellent protection against dirt and oil contamination. May be used in direct sunshine.For manual or machine use. Finish with Teflon Wax Sealer.

hwAx seAler wiTh TeFlON®

175314 YMA639/500 -

Ultra-performance deep-gloss wax sealer. Ultimate quality non-abrasive wax sealing solution with Teflon®. Provides long-lasting high gloss hard-shell protection. Thin-film technology ensures that one bottle goes a long way. May be left for an extended period prior to polishing off. Excellent protection against dirt and oil contamination. May be used in direct sunshine. Contains UV protectors.

i TeAk Oil 175318 YMA645/500 -Penetrating hardwood oil. Deep penetration wood treatment containing linseed and tung oils. Produces a protective and easy-clean surface. For use on any interior or exterior hardwood. Penetrates even moist wood. Contains an anti-rust wax for metal surfaces. Clean wood with Teak Restorer if required.

5 l 20 l Description – Use

A iNTerTUF Black 175119 JBA016/5 175118 JBA016/20 Narrow boat blacking paint. Thinners No. 1

B iNTersTriP PAiNT reMOver

181955 YMA175/5 -New from International® Paint is Interstrip Paint Remover, designed to remove single component yacht paints such as enamels, antifoulings, primers and varnishes.

B hGC

D e F

A B

A B

Model Description – Use

AwATerTiTe ePOxy Filler

250 ml 1 l A quick drying epoxy filler ideal for long-lasting repair onto all suitably primed substrates. Fast curing time, excellent for filling small areas quickly and ideal for the DIY yachtsman. This super-smooth 2-pack formulation has a matt blue finish and can be used on areas above or below the waterline to fill holes at up to 2 cm depth per application. It has excellent resistance to water penetration. Thinners No. 7

175142 YAV145/250 175141 YAV145/1

BiNTerFill 100 wOOD Filler

170 ml A conventional above-the-waterline wood filler, now packaged as part of the Interfill range. Quick drying, creamy texture for filling screw holes and small fine cracks in paintwork. The matt white filler is touch dry after approximately 11/2 hours. Thinners No. 1

175121YAA041/170-

A i