Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
72
5 Sliders
Sliders allow the position of the fifth wheel coupling
to be moved on the semi-trailer tractor unit. This al-
lows the axle load and load distribution to be optimi-
sed, and the total length of the articulated vehicle to
be reduced for ferry crossings or adapted to comply
with national regulations.
JOST’s EV HD slider is suitable for use with heavy-
duty fifth wheel couplings of all conventional makes
with a connecting hole pattern in line with ISO 3842.
JOST’s EV MI slider is suitable for use with fifth
wheel couplings of all conventional makes with a
connecting hole pattern in line with ISO 3842.
The JSK SL sliders can be equipped as an option
with a pneumatic control and are supplied as a
complete unit with integrated fifth wheel coupling.
The SL series is outstanding as a result of its weight
and flexibility. All standard couplings (sheet steel
and cast) can be installed on it.
National regulations and JOST mounting instruc-
tions must be observed for their mounting.
Fitting sliders
The slider is mounted on the mounting angles of the tractorunit. There is no need for an additional mounting plate. Further details for fitting the slider are given in the mountinginstructions.
JSK SL
EV HD / EV MI
Chassis
Rack Carriage Handle
Chassis
Rack Fifth wheel coupling Handle
73
Sliders
SlidersJSK SL
Technical SpecificationThe slider with integral JOST series JSK 37 E or 36 D fifthwheel coupling is designed for 2” king pins (50) as per EG 94/20, DIN 74080, ISO 337 and steering wedges as perEG 94/20, DIN 74085.
• optimum protection against corrosion thanks to cathodic immersion coating
• lightweight• suitable for all standard frame hole patterns
13 x 50,8 = 660,4 Sliding distance
435
989
1370
H
50,8
X Ymin 7° min 7°
760-850
830-930
Technical Data
D value (kN) Imposed load U (t) Approval EC SL152 20 e1 00-1151
Customer hole patterns:
For more information, see www.jost-world.com
JOST product section
Customer hole pattern Order No. Quantity per SLCT SLE 000000120 1CK SLE 000000120 1CN SLE 000000120 1BP SLE 000000120 1CD SLE 000000120 1DF SLE 000000120 2BD SLE 000000320 1BP SLE 000000220 1
Sliders
74
Mounting kits
Explanations:
W = Low-maintenance version
Fifth wheel couplingJSK SL
DO = 36 DEO = 37 E
Mounting height
32 = 173 mm45 = 203 mm54 = 220 mm73 = 263 mm
VariantesHandle/Maintenance06 = Slider manual / SKX6 = XXL Slider manual / SK07 = Slider manual / 37 E WX7 = XXL Slider manual / 37 E WX8 = XXL Slider pneumatic / SK20 = Slider pneumatic / SK21 = Slider pneumatic / 37 E W
Customer hole pattern (all KTL)
AA = Standard (without oval hole, no customer-specific pattern)BC = Slider / SCANIA oval holeBD = Slider / VOLVO oval holeBP = Slider / DC oval holeCK = Slider / MAN oval holeCN = Slider / RVI oval holeCP = Slider / DAF oval holeCT = Slider / IVECO oval holeDF = XXL Slider / JOST oval hole
Components and variantes
Fifth wheel coupling =
Mounting height =
Variantes (handle/maintenance) =
Customer hole pattern =
JSK SL DO 32 06 AA = Order No.
Example of an order number – JSK SL DO 32 06 AA
Order key for JSK SL
Sliders / Spare parts
75
06
03
0405 11
1207
01
02
09 08 15
13
16
10
14
Spare parts
JSK SL
Item Description Serial No./ Order No. Quantity Remark per Slider
01 Fifth wheel coupling Spare parts of fifth wheel coupling seeJSK 37 E or JSK 36 D 1
02 Split pin Spare parts of split pin see JSK 37 E or JSK 36 D 2
03 Pedestal kit BH 173 SLE202170020 1Pedestal kit BH 203 SLE202000020 1Pedestal kit BH 220 SLE202530020 1Pedestal kit BH 263 SLE202550020 1
04 Pedestal kit BH 173 SLE202180020 1Pedestal kit BH 203 SLE202010020 1Pedestal kit BH 220 SLE202540020 1Pedestal kit BH 263 SLE202560020 1
05 Split pin, kit SLE202210020 106 Bracing SLE202120020 107 Stopper, kit SLE202520020 208 Lever, kit SLE202300020 109 Cylinder, kit for pneumatic version SLE202410020 110 Pneumatics kit for pneumatic version V 1021-54 111 Pressure spring SLE201330020 212 Adjusting piece SLE202330020 213 Double tension spring SLE202610000 114 Traverse, kit SLE201380020 215 Handle, kit BH 173 for manual version SLE202420020 1
Handle, kit BH 203 for manual version SLE202850020 1Handle, kit BH 263 for manual version SLE202720020 1
16 Bridge, kit for manual version BH 203 and BH 263 SLE202770020 1
76
Sliders
Sliders EV HD
Technical SpecificationSlider with ISO 3842 hole pattern for fifth wheel couplings asper DIN 74084 (heavy duty fifth wheel couplings) with coupling mounting heights of up to 290 mm.
The load data applies to use on paved roads and in conditionscommon in Central Europe.
Mounting kits for EV HD-800-6Order No. for mounting consisting of: NumberV 2021-15 Slider Hexagon bolt M14 x 1,5 x 40 20
EV HD-800-6 on mounting angles Lock nut M14 x 1,5 20Stop block 4
V 2021-16 Fifth wheel coupling Hexagon bolt M16 x 1,5 x 70 4on EV HD-800-6 Hexagon bolt M16 x 1,5 x 40 4
Lock nut M16 x 1,5 8Washer 17 12Hexagon bolt M16 x 1,5 x 130 4Stop block 15 x 15 x 100 6
Sliding distance
M16x1,5
Chassis width406
860
960
1400
8x100
510
695
880
300
400 400
17
760 - 800600
57
Selection table / Versions available
Order No. Weight D value Imposed load Approval(kg) (kN) U (t) EC
EV HD-800-6 226 260 36 e1 00-1266
10
12
14
15
13
11
16
07
06
04
05
01
02
09
08
03
77
Sliders / Spare parts
Spare parts
EV HD
Item Description Serial No./ EV HD-800-2 EV HD-800-6Remark Order No. Quantity per Order No. Quantity per
01 Hexagon bolt, complete V 2021-09 102 Indicator, complete V 2021-01 103 Leaf spring SK 1859 104 Hexagon bolt, complete V 2021-04 205 Handle, complete V 2005-35 1 SLE200527520 106 Spring hook with chain V 1021-29 107 Bar V 2005-52 208 Countersunk bolt, complete V 2021-03 409 Countersunk bolt, complete V 2021-02 910 Bar, complete V 2005-20 2 SLE200511120 111 Lever, complete V 2005-30 112 Bolt V 2005-43 213 Lever guide, complete V 2005-40 2 SLE200510720 114 Guide tube V 2005-44 115 Pressure spring V 2005-45 1 SLE200510000 116 Bar V 2005-06 2
78
Sliders
Mounting kits for EV MIOrder No. for mounting consisting of: NumberV 1021-41 Slider Countersunk bolt M14 x 40 26
EV MI . . on subframe Lock nut M14 26Stop block 4
V 1021-42 Fifth wheel coupling Hexagon bolt M16 x 1,5 x 50 8on EV MI . . Hexagon bolt M16 x 1,5 x 40 4
Lock nut M16 x 1,5 8Washer 17 12Stop block 15 x 15 x 100 6
Note: Fifth wheel coupling is not included in supply.
SlidersEV MI
Technical SpecificationSlider with connection hole pattern as per ISO 3842 for fifthwheel couplings as per DIN 74081 with fifth wheel couplingmounting heights of up to 250 mm, especially for the JSK 42with DIN bearing.
Mounting on the vehicle chassisSeries EV MI 17-831Suitable for chassis with outer flitches having a chassis widthof 700-775 mm. In the case of chassis with inner flitches having a chassis width of 890-940 mm.
Series EV MI 17-911Suitable for chassis with outer flitches having a chassis widthof 785-845 mm. In the case of chassis with inner flitches having a chassis width of 970-1020 mm.
B A
160
65
570
500
520L
C
Sliding distance X
Drill holes for M14Number of Y per side
700 - 775785 - 845
890 - 940970 - 1020
831911
Chassis width
Subframe
Vehicle chassis
Vehicle chassis
Chassis width
Subframe
Outer
flitch
Inner
flitch
Selection table / Versions available
Order No. Dimensions (mm) Drill hole per side Weight D value Imposed load ApprovalA B C L X Y (kg) (kN) U (t) EC
EV MI17-831 831 927 1760 858 13 190EV MI14-911 911 1007 960 1445 546 10 185 133 18 e1 00-0413EV MI - 927 1445 546 * 186
* Without holes; customers can drill their own holes. For further information, see the mounting and operating instructions.