Upload
lamliem
View
215
Download
2
Embed Size (px)
Citation preview
2010lorem ipsum dolor met set quam nunc parum
rele
ase
DEWETRONPRESSRELEASE
DEWETRON DEWE-3050 features removable display, and unprecedented signal input capabilities 5/31/2012 - Wakefield, RI;FOR IMMEDIATE RELEASE:
DEWE-3050 data acquisition system features removable display
The DEWE-3050 is a powerful benchtop
data acquisition system which accepts up
to 96 channels of differential signal
conditioners, or up to 32 ISOLATED high
bandwidth PLUG-IN signal conditioners.
It is the only DEWETRON “all in one”
instrument that can be configured with so
many plug-in modules, or so many
differential conditioners.
Big Touchscreen Display
The front panel contains a big 17" high
resolution touchscreen display. This
ruggedized "tablet" can be removed
from the unit and placed feet away from
the mainframe, for maximum
convenience. The touchscreen itself is
capacitive for incredible transparency.
Therefore it also supports MULTI
TOUCH, just like today's smart phones,
where implemented.
You can also mount the display onto the
chassis backwards, to protect the screen
when the system is not being used, or for
shipping.
When the front panel display is
removed, it reveals a pocket behind it
where the small keyboard and touchpad
are stored, so you can’t lose them. There
is also room for cables for the display,
and other accessories.
F lexible Rear Panel
The DEWE-3050 is the most versatile all-
in-one data acquisition system from
DEWETRON, in terms of which
combination of signal conditioners,
types, and quantities can be installed on
the rear panel.
For example, if you prefer our plug-in
ISOLATION modules, such as the DAQ /
HSI / PAD series, the DEWE-3050 is the
only DEWETRON model that can hold
up to 32 of them!
Or, if our DIFFERENTIAL MDAQ
conditioners are a better fit for your
application, the DEWE-3050 can be
configured with a staggering 96
channels on the rear panel.
DEWETRON users
All major industries, all around the world...
Aerospace and militaryLockheed Martin, Boeing, United Technologies, Honeywell Aerospace, Honeywell Engines and Systems, Sikorsky, Raytheon, Northrop Grumman, NASA Kennedy, NASA Glenn, NASA Johnson, Eglin AFB, Patuxent River NAS, Edwards AFB, China Lake...
AutomotiveFord Motor Company, Chrysler, General Motors, Hyundai, Nissan, Honda, Toyota, Subaru, TRW, Siemens, Continental, American Axle, Autoliv, CNH, Dexter Axle, CVG, Detroit Diesel, John Deere, Harley Davidson, Joe Gibbs Racing, Robert Bosch Company...
TransportationKawasaki Transportation, Alstom Transportation, Hyundai Rotem, New York City Transit, WMATA, MTA, Metro North, TTCI, Paccar, Freightliner...
EnergyFlorida Power and Light, Entergy Operations, Progress Energy, Duke Energy, Constellation Energy, Dominion Power...
IndustyAlbany International, Carver Pump, Metaldyne, Philips Lighting, Lee Company, Diamond Electric Manufacturing, Delta Faucet...
Or how about a combination of plug-in
modules, differential conditioners, and
other connectors? The DEWE-3050 can
be configured with up to 16 DAQ /
HSI / PAD plug-in modules PLUS up to
64 channels of differential MDAQ
channels. The rear panel is modular,
arranged in PANELS which can be
added and moved around in countless
combinations. In short, the DEWE-3050
can be configured to handle all of the
applications that you need to support.
Power ful i7® Inside
The DEWE-3050 has a full power 8 core
Intel i7 CPU inside, with 4 GB of RAM,
for maximum performance under all
conditions.
There are two removable hard drives on
the right side panel: a C drive for the
Windows7 operating system, and a
larger D drive for data. The hard drive
sizes are increasing all the time, but at
press time the D drive was a 500 GB
2.5" drive.
Solid state drives are also available, to
allow the system to handle more shock
and vibration.
There are 5 PCI slots inside for accepting
our A/D and interface cards, so you can
configure the DEWE-3050 without
worrying about running out of resources
to add the cards that you need for your
application.
No other DEWETRON portable all-in-
one system has so many resources, or
can be configured in so many different way as the
DEWE-3050.
Choice of A/D cards
DEWETRON ORION series A/D cards are at the top end of A/D cards on the market today. Here is a brief summary of what's available:
16-bi t ORION cards
• 16-channels, 100 kS/s/ch max sample rate
• 32-channels, 100 kS/s/ch max sample rate
• 16-channels, 500 kS/s/ch max sample rate
• 16-channels, 1000 kS/s/ch max sample rate
22-bit ORION cards
• 16-channels, 100 kS/s/ch max sample rate
• 32-channels, 100 kS/s/ch max sample rate
24-bit ORION cards
• 8-channels, 200 kS/s/ch max sample rate
• 16-channels, 200 kS/s/ch max sample rate
Counters and digi tal l ines
All ORION cards features synchronous counter/encoder
inputs that are ideal for order tracking, simple and
advanced tachometer / RPM inputs, and even up to a full
quadrature encoder. In addition there are synchronous
digital input and output lines, so you can both record TTL
level signals, as well as generate TTL alarm outputs based
on user-defined conditions. For automotive applications, the
ORION cards can also be equipped with 2 high speed
CAN BUS interfaces.
Most ORION cards can be expanded to have MORE
counters, MORE digital input lines, and HIGHER input
ranges and definable trigger thresholds for the counters.
Choice of Signal Condit ioners
What put DEWETRON on the map 25 years ago was our
signal conditioning excellence. No one else makes the
range and depth of plug-in ISOLATION modules, with
multiple ranges and filters, high bandwidth and high
isolation! A brief overview of the most popular plug-in
conditioners:
• DAQP-HV high voltage module, ranges from ±20V to
±1400, 1800Vrms isolation, 300 kHz bandwidth,
multiple LP filters
• DAQP-LV low voltage module, ranges from ±10mV to
±50V, 1000Vrms isolation, 400 kHz bandwidth,
multiple LP filters, choice of 5 connector types (BNC,
banana, DB9, LEMO, screw terminal)
• DAQP-STG strain gage / universal signal conditioner,
capable of handling every kind of resistive
measurement, 1/2, 1/4 and full bridge with
completion, shunt cal, auto-balance, and self-test, 300
kHz bandwidth, and 350V isolation.
Many ORION cards are available from DEWETRON. Your
DEWE-3050 can be configured with any of them, and multiple
cards in the same system.
• DAQP-FREQ-A isolated frequency to voltage module with
separate outputs for F/V and TTL pulses, ranges up to 200
kHz
• DAQP-MULTI universal signal conditioner for simple bridge,
thermocouples, RTD, and low voltages and currents, 3 kHz
bandwidth, and 350V isolation
And those are just a few of our conditioners! Please see our
website for the full run down of higher bandwidth HSI series
plug-in modules, as well as our factory installed MDAQ
conditioners, with bandwidth from 30 kHz to 300 kHz.
Inter face the wor ld
Perhaps what makes DEWETRON systems so powerful in
general is their ability to bring in data from such a wide
variety of sensor types and interfaces, and the DEWE-3050 is
no exception to this rule. You can add these additional input
types and bus interfaces to the DEWE-3050, and they will be
displayed and recorded in the same software, perfectly
synchronized!
• VIDEO - from simple webcam to our high speed DEWE-
CAM and Gig-E cameras
• VIDEO DATA - from FLIR infra-red cameras, or from RADAR
sensors like the Velodyne
• GPS - from low-cost 1 Hz sensors all the way to the high-
end DEWE-VGPS-200 and DEWE-VGPS-HS, used for
dynamic vehicle testing and speed trials
• CAN BUS - available right on the ORION series A/D card,
you can have up to 8 CAN BUS interfaces on the
DEWE-3050, recording hundreds of channels
• ARINC 429 - up to 16 ARINC buses, each with dozens or
hundreds of channels can be added to the DEWE-3050
• MIL-STD-1553 - up to 8 dual redundant 1553 buses,
each with dozens or hundreds of parameters, can be
recorded and displayed
• PCM data - from spacecraft or missiles, can be added to
the DEWE-3050, using the Tarsus PCM interface card
and the software option
And more!
Hot -swappable batter ies
The DEWE-3050 can be plugged directly into
120/240VAC power, but it also has an incredible UPS built
in, which will power the system for up to 3 hours without
power! These SideHAND2 series "smart batteries" can
even be hot-swapped while the system is running. When
the system is connected to power, it will recharge the
batteries automatically, whenever needed.
Easy sof tware
All of the data processing power mentioned above would
be of little use without an excellent software package to
back it up, and that is exactly what the DEWE-3050
includes. Our DS-7 software brings all of those data inputs
to life on easy setup and display screens. You can even
tailor your own screens any way that you like, moving the
elements around and sizing them according to your tastes.
Record continuously to disk, or set a time or file size limit.
Or, set up triggering to start and stop recording according
to what's happening within the data. You can automate the
system as much as you like with these controls, as well as
the built-in sequencer tool.
A rich palette of MATH functions allows you to process the
channels with filtering, integration, derivation, polynomials,
advanced TRIG and algebraic expressions, to calculate
statistics from the data, and much more. These functions
can be added and run in real time, or you can add or
modify them later and recalculate the results off-line. You can even move the data to
your desktop computer and run the analysis there at the comfort of your desk - no
need to buy another software license, because this function is included as a standard.
Install the software for analysis on any number of computers that you like - there is no
limitation.
DS-7 also has built-in exporting to a wide variety of other formats, including delimited
ASCII, MATLAB, EXCEL, and more than a dozen more. New export filters are being
added all the time.
Summary
The DEWE-3050 is a premiere data acquisition system from the leader in this field,
DEWETRON. The conveniences and genius of the hardware platform, combined with
the top notch data acquisition signal conditioners and A/D technologies, as well as
support and deep integration of best of breed sensors and interfaces, put this system
into a class of its own.
Please contact DEWETRON for a demonstration at your site, or simply to learn more.
The DEWE-3050 is made at the company’s USA headquarters, in Wakefield, RI.
For more information
The DEWE-3050 can be seen at this link:
http://www.dewamerica.com/Products/DEWE-3050/index.php
Toll-free telephone: +1 877-431-5166
Worldwide telephone: +1 401-284-3750
Or send an email to [email protected]
# # #
For more information...Contact:Grant M. SmithDewetron, Inc.t 401-284-3750f 401-284-3755
www.dewamerica.com