1. IEEE Std 1002-1987 IEEE Standard Taxonomy for Software Engineering Standards.pdf2. IEC 60488-1 First edition 2004-07; IEEE 488.1 Higher performance protocol for the standard digital interface for programmabl.pdf3. IEC 60488-2 First edition 2004-05; IEEE 488.2 Standard digital interface for programmable instrumentation - Part 2- Codes, f.pdf4. IEC 61523-3 First edition 2004-09; IEEE 1497 Delay and power calculation standards - Part 3- Standard Delay Format (SDF) for.pdf5. IEC 61588 First edition 2004-09; IEEE 1588 Precision clock synchronization protocol for networked measurement and control sy.pdf6. IEC 61691-1-1 First edition 2004-10; IEEE 1076 Behavioural languages - Part 1-1- VHDL language reference manual.pdf7. IEC 61691-4 First edition 2004-10; IEEE 1364 Behavioural languages - Part 4- Verilog hardware description language.pdf8. IEEE 625-2001 Recommended Practices to Improve Electrical Maintenance and Safety in the Cement Industry.pdf9. IEEE 1070-1995 IEEE Guide For The Design And Testing Of Transmission Modular Restoration Structure Components.pdf10. IEEE 1076-CONC-I99O The Sense of VASG.pdf11. IEEE 1332-1998 Reliability Program for the Development and Production of Electronic.pdf12. IEEE 275-1992 Recommended Practice for Thermal Evaluation of Insulation Systems.pdf13. IEEE 463 Standard STANDARD FOR SAFETY PRACTICES IN ELECTROLYTIC CELL LINE WORKING ZONES 1994 CHANGES.pdf14. IEEE 730-1989 IEEE Standard for Software Quality Assurance Plans.pdf15. IEEE C37-04f-1990 (Supplement to IEEE C37.04 1979) Supplement To IEEE Standard Rating Structure For AC High-Voltage Circuit .pdf16. IEEE C37.04h-1990 (Supplement to lEEE C37.04-1979) Supplement To IEEE Standard Rating Structure For AC High-Voltage Circuit .pdf17. IEEE C37.04i-1991 (Supplement to IEEE C37.04-1979) Supplement to IEEE Standard Rating Structure for AC High-Voltage Circuit .pdf18. IEEE C37.09a-1991 (Supplement to IEEE C37.09-1979) Supplement To IEEE Standard Test Procedure For Ac High-voltage Circuit Br.pdf19. IEEE C37.09g-1991 (Supplement to IEEE C37.09-1979) Supplement To IEEE Standard Test Procedure For AC High-voltage Circuit Br.pdf20. IEEE C57.12.26-1992 IEEE Standard for Pad-mounted, Compartmental-Type, Self-cooled, Three-phase Distribution Transformers fo.pdf21. IEEE C62.31-1987 IEEE Standard Test Specifications For Gas-Tube Surge-protective Devices.pdf22. IEEE C62.92.1-1987 An American National Standard Ieee Guide For The Application Of Neutral Grounding In Electrical Utility S.pdf23. IEEE Std C 37.010-1999 Application Guide for AC High-Voltage Circuit Breakers .pdf24. IEEE Std C 37.011-1994 Application Guide for Transient Recovery Voltage .pdf25. IEEE Std C 37.081-1981 Guide for Synthetic Fault Testing .pdf26. IEEE Std C 37.108-2002 Guide for the Protection of Network Transformers.pdf27. IEEE Std C 37.111-1999 Standard Common Format for Transient Data Exchange for Power Systems.pdf28. IEEE Std C 37.112-1996 Standard Inverse-Time Characteristic Equations for Overcurrent Relays.pdf29. IEEE Std C 37.113-1999 Guide for Protective Relay Applications to Transmission Lines.pdf30. IEEE Std C 37.123-1996 Guide to Specifications for Gas-Insulated Electric Power Equipment.pdf31. IEEE Std C 37.14-2002 Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures.pdf32. IEEE Std C 37.20.1-2002 Standard for Metal-Enclosed Low-Voltage Power Breaker Switchgear.pdf33. IEEE Std C 37.20.2b-1994 Standard for Metal-Clad Switchgear.pdf34. IEEE Std C 37.20.3-2001 Metal-Enclosed Interrupter Switchgear.pdf35. IEEE Std C 37.20.4-2001 Standard for Indoor AC Switches (1 kV - 38 kV) for Use Switchgear.pdf36. IEEE Std C 37.20.6-1997 Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices.pdf37. IEEE Std C 37.20.7-2001 Guide for Testing Medium-Voltage Metal-Enclosed Switchgear .pdf38. IEEE Std C 37.23-1987 Guide for Metal-Enclosed Bus and Calculating Losses .pdf39. IEEE Std C37.04-1999 IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers .pdf40. IEEE Std 1-2000 IEEE recommended practice - general principles for temperature limits in the rating of electrical equipment .pdf41. IEEE Std 1002-1987 IEEE standard taxonomy for software engineering standards.pdf42. IEEE Std 1003.0-1995 IEEE guide to the POSIX Open System Environment (OSE).pdf43. IEEE Std 1003.1, 2004 Edition. The Open Group Technical Standard Base Specifications,... Standard for information technology.pdf44. IEEE Std 1003.1, 2004 Edition. The Open Group Technical Standard. Base Specifications... Standard for information technology.pdf45. IEEE Std 1003.1-1988_INT, 1992 Edition IEEE standards interpretations for IEEE Standard Portable Operating System Interface .pdf46. IEEE Std 1003.1-2001. Base Definitions, Issue 6 1003.1 standard for information technology - portable operating system inter.pdf47. IEEE Std 1003.1-2001. Shell and Utilities, Issue 6 Standard for Information Technology - Portable Operating System Interface.pdf48. IEEE Std 1003.1-2001. System Interfaces, Issue 6 1003.1 standard for information technology - portable operating system inte.pdf49. IEEE Std 1003.1-2001_Cor 1-2002. The Open Group Technical Standard Base Specification... Standard for Information Technology.pdf50. IEEE Std 1003.1-2001_Cor 2-2004 Standard for Information Technology- Portable Operating System Interface (POSIX).pdf51. IEEE Std 1003.10-1995 IEEE standard for information technology - POSIX-based supercomputing application environment profile..pdf52. IEEE Std 1003.1_2003.1_INT, Oct.1994 Edition IEEE standard interpretations for IEEE Std 1003.1-1990 and IEEE Std 2003.1-1992.pdf53. IEEE Std 1003.1_2003.l_lNT, March 1994 Edition IEEE Standards Interpretations For IEEE Std 1003.1-1990 and IEEE Std 2003. 1-.pdf54. IEEE Std 1003.1b-1993 POSIX Part 1- System API- Amend. 1- Realtime Extension [C Language].pdf55. IEEE Std 1003.1d-1999 IEEE standard for information technology-portable operating system interface (posix)-part 1- system ap.pdf56. IEEE Std 1003.1j-2000 IEEE standard for information technology- portable operating system interface (POSIX)- part 1- system .pdf57. IEEE Std 1003.1j-2000 Information Technology - Portable Operating System Interface Shell.pdf58. IEEE Std 1003.1q-2000 IEEE standard for information technology - portable operating system interface (POSIXR)-Part 1- system.pdf59. IEEE Std 1003.2-1992_INT, Dec. 1994 Edition IEEE standards interpretations for IEEE Std 1003.2-1992.pdf60. IEEE Std 1003.2-1992_INT, March 1994 Edition IEEE Standards Interpretations for lEEE Std 1003.2-1992.pdf61. IEEE Std 1003.23-1998 IEEE guide for developing user organization Open System Environment (OSE) profiles.pdf62. IEEE Std 1003.26-2003 IEEE Std 1003-2006 - 2003. IEEE Standard for Information Technology - Portable Operating System Interf.pdf63. IEEE Std 1003.3-1991 IEEE standard for information technology-test methods for measuring conformance to POSIX.pdf64. IEEE Std 1003.5b-1996 (Includes IEEE Std 1003.5-1992) IEEE Standard for Information Technology- POSIX R Ada Language Interfa.pdf65. IEEE Std 1007-1991 IEEE standard methods and equipment for measuring the transmission characteristics of pulse-code modulati.pdf66. IEEE Std 1012-2004 (Revision of IEEE Std 1012-1998) IEEE Std 1012 - 2004 IEEE Standard for Software Verificiation and Valida.pdf67. IEEE Std 1012-2004 IEEE Standard for Software Verification and Validation 软件的确认标准.pdf68. IEEE Std 1012a-1998 Supplement to IEEE Standard for Software Verification and Validation.pdf

69. IEEE Std 1013-1990 IEEE recommended practice for sizing lead-acid batteries for photovoltaic (PV) systems.pdf70. IEEE Std 1013-2000 IEEE recommended practice for sizing lead-acid batteries for photovoltaic (PV) systems.pdf71. IEEE Std 1014.1-1994 IEEE standard for Futurebus+_VME64 Bridge.pdf72. IEEE Std 1016-1998 Recommended Practice for Software Design Descriptions IEEE Computer Society Document.pdf73. IEEE Std 1017-2004 (Revision of IEEE Std 1017-1991) IEEE Std 1017 - 2004 - IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable.pdf74. IEEE Std 1018-2004 (Revision of IEEE Std 1018-1991) IEEE Std 1018 - 2004 - IEEE Recommended Practice for Specifying Electric.pdf75. IEEE Std 1025-1993 IEEE guide to the assembly and erection of concrete pole structures.pdf76. IEEE Std 1026-1995 IEEE recommended practice for test methods for determination of compatibility of materials with conductiv.pdf77. IEEE Std 1026-1995 Test methods for determination of compatibility of materials.pdf78. IEEE Std 1027 Draft trial-use standard method for measuring the magnetic field intensity around a telephone receiver.pdf79. IEEE Std 1027-1996 IEEE standard method for measurement of the magnetic field in the vicinity of a telephone receiver.pdf.pdf80. IEEE Std 1028-1988 IEEE standard for software reviews and audits.pdf81. IEEE Std 1029.1-1998 IEEE standard for VHDL waveform and vector exchange to support design and test verification (WAVES) lan.pdf82. IEEE Std 1031-2000 (Revision of IEEE Std 1031-1991) IEEE Guide for the Functional Specification of Transmission Static Var Compensators.pdf83. IEEE Std 1031-2000 Guide for the Functional Specification Compensators.pdf84. IEEE Std 1036-1992 IEEE guide for application of shunt power capacitors.pdf85. IEEE Std 1037-1992 IEEE standard terms and definitions for surface acoustic wave (SAW) devices.pdf86. IEEE Std 1037-1992 Terms and Definitions for Surface Acoustic Wave Devices声学设备术语和定义.pdf87. IEEE Std 1043-1996 Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils.pdf88. IEEE Std 1044.1-1995 IEEE guide to classification for software anomalies.pdf89. IEEE Std 1045-1992 IEEE standard for software productivity metrics.pdf90. IEEE Std 1045-1992 Standard for Software Productivity Metrics IEEE Computer Society Document.pdf91. IEEE Std 1046-1991 IEEE application guide for distributed digital control and monitoring for power plants.pdf92. IEEE Std 1048-1990 IEEE guide for protective grounding of power lines.pdf93. IEEE Std 1048-2003 (Revision of IEEE Std 1048-1990) IEEE guide for protective grounding of power lines.pdf94. IEEE Std 1050-1996 IEEE guide for instrumentation and control equipment grounding in generating stations.pdf95. IEEE Std 1050-2004 (Revision of IEEE Std 1050-1996) IEEE Guide for Instrumentation and Control Equipment Grounding in Genera.pdf96. IEEE Std 1057-1994 IEEE standard for digitizing waveform recorders.pdf97. IEEE Std 1058-1998 IEEE standard for software project management plans.pdf98. IEEE Std 1058-1998 Recommended for Software Project Management Plans IEEE Computer Society Document.pdf99. IEEE Std 1058.1-1987 Recommended for Software Project Management Plans IEEE Computer Society Document.pdf100. IEEE Std 1059-1993 IEEE guide for software verification and validation plans.pdf101. IEEE Std 1061-1992 IEEE standard for a software quality metrics methodology.pdf102. IEEE Std 1061-1998 Standard for a Software Quality Metrics Methodology IEEE Computer Society Document.pdf103. IEEE Std 1062, 1998 Edition IEEE recommended practice for software acquisition.pdf104. IEEE Std 1062-1993 IEEE recommended practice for software acquisition..pdf105. IEEE Std 1063-1987 Standard for Software User Documentation IEEE Computer Society Document.pdf106. IEEE Std 1063-2001 IEEE standard for software user documentation.pdf107. IEEE Std 1063-2001 Standard for Software User Documentation IEEE Computer Society Document.pdf108. IEEE Std 1064-1991 IEEE guide for multifactor stress functional testing of electrical insulation systems.pdf109. IEEE Std 1067-1990 IEEE guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765 kV AC.pdf110. IEEE Std 1067-1996 IEEE guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765 kV ac and ± 750 kV dc.pdf111. IEEE Std 1067-1996 Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing.pdf112. IEEE Std 1067-2005 ( Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing.pdf113. IEEE Std 1067-2005 (Revision of IEEE Std 1067-1995) IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conduct.pdf114. IEEE Std 1068-1990 IEEE recommended practice for the repair and rewinding of motors for the petroleum and chemical indu.pdf115. IEEE Std 1068-1996 IEEE recommended practice for the repair and rewinding of motors for the petroleum and chemical industry.pdf116. IEEE Std 1068-1996 IEEE recommended practice for the repair and rewinding of motors for the petroleum and chemical industry..pdf117. IEEE Std 1069-1991 IEEE recommended practice for precipitator and baghouse hopper heating systems.pdf118. IEEE Std 1073-1996 IEEE Standard for Medical Device Communications--Overview and Framework .pdf119. IEEE Std 1073.3.1-1994 IEEE standard for medical device communications-transport profile-connection mode.pdf120. IEEE Std 1073.3.1a-2000 IEEE Standard for Medical Device Communications - Transport Pro le - Connetion mode - Amendment 1- C.pdf121. IEEE Std 1073.3.2-2000 IEEE standard for medical device communications - transport profile - IrDA based - cable connected.pd.pdf122. IEEE Std 1073.4.1, 2000 Edition IEEE standard for medical device communications - physical layer interface - cable connected.pdf123. IEEE Std 1073.4.1-1994 IEEE standard for medical device communications-physical layer interface-cable connected.pdf124. IEEE Std 1073.4.1-1994 Standard for Medical Device Communications Physical Layer Interface.pdf125. IEEE Std 1074-1991 IEEE standard for developing software life cycle processes.pdf126. IEEE Std 1074-1995 IEEE standard for developing software life cycle processes.pdf127. IEEE Std 1074-1997 IEEE standard for developing software life cycle processes.pdf128. IEEE Std 1076-1987 IEEE standard VHDL language reference manual.pdf129. IEEE Std 1076-2002 (Revision of IEEE Std 1076, 2002 Edn) 1076 IEEE Standard VHDL Language Reference Manual.pdf130. IEEE Std 1076.2-1996 IEEE standard VHDL mathematical packages.pdf131. IEEE Std 1076.4-2000 IEEE standard for VITAL ASIC (application specific integrated circuit) modeling specification.pdf132. IEEE Std 1076.6-1999 IEEE standard for VHDL Register Transfer Level (RTL) synthesis.pdf133. IEEE Std 1076.6-2004 (Revision of IEEE Std 1076.6-1999) IEEE Standard for VHDL Register Transfer Level (RTL) Synthesis.pdf.pdf134. IEEE Std 108-1955; AIEE No.450-April 1955.pdf135. IEEE Std 1082-1997 Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations.pdf136. IEEE Std 1101.1-1998 IEEE standard for mechanical core specifications for microcomputers using IEC 60603-2 connectors.pdf.pdf

137. IEEE Std 1101.4-1993 IEEE standard for military module, format E form factor..pdf138. IEEE Std 1106-1995 IEEE recommended practice for installation, maintenance, testing, and replacement of vented nickel-cadmiu.pdf139. IEEE Std 1106-2005 (Revision of IEEE Std 1106-1995) IEEE recommended practice for installation, maintenance, testing, and re.pdf140. IEEE Std 1107-1996 IEEE recommended practice for thermal evaluation of sealed insulation systems for AC electric machinery e.pdf141. IEEE Std 111-2000 IEEE standard for wide-band (greater than 1 decade) transformers.pdf142. IEEE Std 1115-2000 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications.pdf143. IEEE Std 1119-1988 IEEE guide for fence safety clearances in electric-supply stations .pdf144. IEEE Std 112-1991 IEEE standard test procedure for polyphase induction motors and generators.pdf145. IEEE Std 112-1996 IEEE standard test procedure for polyphase induction motors and generators.pdf146. IEEE Std 1120-1990 Guide to the Factors to Be Considered in the Planning, Design, and Installation.pdf147. IEEE Std 1120-1990 IEEE guide to the factors to be considered in the planning, design, and installation of submarine power a.pdf148. IEEE Std 1120-2004 IEEE Std 1120 - 2004 - IEEE Guide for the Planning, Design, Installation, and Repair of Submarine Power C.pdf149. IEEE Std 1124-2003 IEEE guide for the analysis and definition of DC-side harmonic performance of HVDC transmission systems.p.pdf150. IEEE Std 1125-1993 Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment.pdf151. IEEE Std 1125-1993 IEEE guide for moisture measurement and control in SF_sub 6_ Gas-Insulated Equipment.pdf152. IEEE Std 1127-1990 IEEE guide for the design, construction, and operation of safe and reliable substations for environmental.pdf153. IEEE Std 1127-1998 IEEE guide for the design, construction, and operation of electric power substations for community accept.pdf154. IEEE Std 1128-1998 IEEE recommended practice for Radio-Frequency (RF) absorber evaluation in the range of 30 MHz to 5 GHz.pd.pdf155. IEEE Std 1129-1992 Recommended Practice for Monitoring and Instrumentation of Turbine Generators.pdf156. IEEE Std 1138-1994 IEEE standard construction of composite fiber optic overhead ground wire (OPGW) for use on electric.pdf.pdf157. IEEE Std 1139-1999 Definitions of Physical Quantities for Fundamental Frequency and Time Metrology.pdf158. IEEE Std 1139-1999 IEEE standard definitions of physical quantities for fundamental frequency and time metrology - random in.pdf159. IEEE Std 1140-1994 IEEE standard procedures for the measurement of electric and magnetic fields from video display term.pdf.pdf160. IEEE Std 1142-1995 Guide for the design, testing and application of moisture-impervious, solid dielectric.pdf161. IEEE Std 1142-1995 IEEE guide for the design, testing, and application of moisture-impervious, solid dielectric, 5-35 kV pow.pdf162. IEEE Std 1145-1990 IEEE recommended practice for installation and maintenance of nickel-cadmium batteries for photovoltaic (.pdf163. IEEE Std 1145-1999 IEEE recommended practice for installation and maintenance of nickel-cadmium batteries for Photovoltaic (.pdf164. IEEE Std 1145-1999 Recommended Practice for Installation and Maintenance of Nickel-Cadmium Batteries.pdf165. IEEE Std 1147-1991 Guide for the Rehabilitation of Hydroelectric Power Plants.pdf166. IEEE Std 1147-2005 (Revision of IEEE Std 1147-1991) IEEE Guide for the Rehabilitation of Hydroelectric Power Plants.pdf167. IEEE Std 1149.1-1990 IEEE standard test access port and boundary - scan architecture.pdf168. IEEE Std 1149.1-2001 IEEE standard test access port and boundary-scan architecture.pdf169. IEEE Std 1149.1b-1994 Supplement to IEEE Std 1149.1-1990, IEEE standard test access port and boundary-scan architecture.pdf.pdf170. IEEE Std 1149.4-1999 IEEE standard for a mixed-signal test bus.pdf171. IEEE Std 1149.5-1995 IEEE standard for Module Test and Maintenance Bus (MTM-Bus) protocol.pdf172. IEEE Std 115-1995 IEEE Guide- Test Procedures for Synchronous Machines.pdf173. IEEE Std 1150-1991 IEEE trial-use recommended practice for integrating power plant computer-aided engineering (CAE) applicat.pdf174. IEEE Std 1155-1992 IEEE standard for VMEbus extensions for instrumentation- VXIbus.pdf175. IEEE Std 1156.1-1993 Standard Microprocessor Environmental Specifications for Computer Modules IEEE Computer.pdf176. IEEE Std 1156.4-1997 IEEE standard for environmental specifications for spaceborne computer modules.pdf177. IEEE Std 1158-1991 IEEE recommended practice for determination of power losses in high-voltage direct-current (HVDC) convert.pdf178. IEEE Std 1158-1991 Recommended practice for determination of power losses in high-voltage direct current.pdf179. IEEE Std 1159-1995 IEEE recommended practice for monitoring electric power quality.pdf180. IEEE Std 1159.3-2003 IEEE recommended practice for the transfer of power quality data.pdf181. IEEE Std 115A-1987 IEEE standard procedures for obtaining synchronous machine parameters by standstill frequency response te.pdf182. IEEE Std 1160-1993 IEEE standard test procedures for high-purity germanium crystals for radiation detectors.pdf183. IEEE Std 1160-1993 Standard Test Procedures for High-Purity Germanium Crystals for Radiation Detectors.pdf184. IEEE Std 1164-1993 Standard Multivalue Logic System for VHDL Model Interoperability.pdf185. IEEE Std 1175 IEEE trial-use standard reference model for computing system tool interconnections.pdf186. IEEE Std 1175.3-2004 IEEE Standard for CASE Tool Interconnections-Reference Model for Specifying Software Behavior.pdf187. IEEE Std 1178-1990 IEEE standard for the scheme programming language.pdf188. IEEE Std 118-1978 IEEE standard test code for resistance measurement.pdf189. IEEE Std 1184-1994 IEEE guide for the selection and sizing of batteries for uninterruptible power systems.pdf190. IEEE Std 1185-1994 IEEE guide for installation methods for generating station cables.pdf191. IEEE Std 1187-1996 Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries.pdf192. IEEE Std 1188-1996 Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated.pdf193. IEEE Std 1188-2005 (Revision of IEEE Std 1188-1996) IEEE Recommended Practice for Maintenance, Testing, and Replacement of V.pdf194. IEEE Std 1189-1996 Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications.pdf195. IEEE Std 1189-1996 IEEE guide for selection of Valve-Regulated Lead-Acid (VRLA) batteries for stationary applications.pdf.pdf196. IEEE Std 119-1974 IEEE recommended practice for general principles of temperature measurement as applied to electrical appar.pdf197. IEEE Std 1193-1994 IEEE guide for measurement of environmental sensitivities of standard frequency generators.pdf198. IEEE Std 1194-1991 IEEE standard for backplane electrical performance.pdf199. IEEE Std 1194.1-1991 IEEE standard for electrical characteristics of backplane transceiver logic (BTL) interface circuits.pd.pdf200. IEEE Std 120-1955; ASME PTC 19.6-1955 Master test code for electrical measurements in power circuits.pdf201. IEEE Std 1202-1991 Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies.pdf202. IEEE Std 1202-1991 IEEE Standard for flame testing of cables for use in cable tray in industrial and commercial occupancies..pdf203. IEEE Std 1205-1993 IEEE guide for assessing, monitoring, and mitigating aging effects on Class 1E equipment used in nuclear .pdf204. IEEE Std 1205-2000 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects of Class 1E Equipment Used in Nuclear .pdf

205. IEEE Std 1206-1994 IEEE standard methods for measuring transmission performance of telephone handsets and headsets.pdf206. IEEE Std 1209-1992 IEEE recommended practice for the evaluation and selection of CASE tools.pdf207. IEEE Std 1210-1996 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants.pdf208. IEEE Std 1210-2004 (Revision of IEEE Std 1210-1996) IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubri.pdf209. IEEE Std 1210-2004 Standard Tests for Determining Compatibility of Cable.pdf210. IEEE Std 1212-1991 IEEE standard control and status register (CSR) architecture for microcomputer buses.pdf211. IEEE Std 1212.1-1993 IEEE Standard for Communicating Among Processors and Peripherals Using Shared Memory (DMA).pdf212. IEEE Std 1214-1992 IEEE standard multichannel analyzer (MCA) histogram data interchange format for nuclear spectroscopy.pdf.pdf213. IEEE Std 1214-1992 Multichannel Analyzer Histogram Data Interchange Format.pdf214. IEEE Std 1216-2000 IEEE guide for the application of faulted circuit indicators for 200 A, single-phase underground resident.pdf215. IEEE Std 1217-2001 IEEE guide for preservative treatment of wood distribution and transmission line structures.pdf216. IEEE Std 1219-1993 IEEE standard for software maintenance.pdf217. IEEE Std 122-1991 IEEE recommended practice for functional and performance characteristics of control systems for steam turb.pdf218. IEEE Std 122-1991 Recommended Practice for Functional and Performance Characteristics of Control Systems.pdf219. IEEE Std 1220-1994 IEEE trial-use standard for application and management of the system engineering process.pdf220. IEEE Std 1220-1998 IEEE standard for application and management of the systems engineering process.pdf221. IEEE Std 1220-2005 (Revision of IEEE Std 1220-1998) IEEE Standard for Application and Management of the Systems Engineering .pdf222. IEEE Std 1221-1993 IEEE guide for fire hazard assessment of electrical insulating materials in electrical power systems.pdf223. IEEE Std 1221-1993 IEEE guide for fire hazard assessment of electrical insulating materials in electrical power systems.pdf.pdf224. IEEE Std 1222-2004 IEEE Std 1222 - 2004 IEEE Standard for All-Dielectric Self-Supporting Fiber Optic Cable.pdf225. IEEE Std 1224.2-1993 IEEE standard for information technology - directory service Application Program Interface (API).pdf.pdf226. IEEE Std 1224_1327_1224.1_lNT, March 1994 Edition IEEE Standard criteria and guidelines for the laboratory measurement and r.pdf227. IEEE Std 1226-1998 IEEE trial-use standard for A Broad Based Environment for Test (ABBET), overview and architecture.pdf228. IEEE Std 1226.2-1993 IEEE ABBET trial-use standard for Ada-based ATLAS-level test procedure interface for a broad-based.pdf.pdf229. IEEE Std 1226.3-1998 IEEE standard for software interface for resource management for A Broad-Based Environment for Test (AB.pdf230. IEEE Std 1226.6-1996 IEEE ABBET guide for the understanding of the `A broad-based environment for test (ABBET)' standard.pdf231. IEEE Std 1226.6-1996 IEEE ABBET guide for the understanding of the `A broad-based environment for test (ABBET)' standard.pdf.pdf232. IEEE Std 1227-1990 IEEE guide for the measurement of DC electric-field strength and ion related quantities.pdf233. IEEE Std 1232-1995 IEEE trial-use standard for Artificial Intelligence and Expert System Tie to Automatic Test Equipment (AI.pdf234. IEEE Std 1232-2002 (Revision of IEEE Std 1232-1995, IEEE Std 1232.1-1997 and IEEE Std... IEEE standard for artificial intell.pdf235. IEEE Std 1232.1-1997 IEEE trial-use standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (.pdf236. IEEE Std 1233, 1998 Edition Guide for Developing System Requirements Specifications.pdf237. IEEE Std 1233, 1998 Edition IEEE guide for developing system requirements specifications.pdf238. IEEE Std 1233-1996 IEEE guide for developing system requirements specifications.pdf239. IEEE Std 1235-2000 Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts.pdf240. IEEE Std 1235-2000 IEEE guide for the properties of identifiable jackets for underground power cables and ducts.pdf241. IEEE Std 1240-2000 Guide for the Evaluation of the Reliability of HVDC Converter Stations.pdf242. IEEE Std 1240-2000 IEEE Guide for the Evaluation of the Reliability of HVDC Converter Stations.pdf243. IEEE Std 1241-2000 IEEE standard for terminology and test methods for analog-to-digital converters.pdf244. IEEE Std 1243-1997 IEEE guide for improving the lightning performance of transmission lines.pdf245. IEEE Std 1244-5.2000 IEEE standard for media management system (MMS) library management protoco (LMP).pdf246. IEEE Std 1244-5.2000 Standard for Media Management System (MMS) Library Management Protocol.pdf247. IEEE Std 1244.1-2000 IEEE Standard for media management system (MMS) architecture.pdf248. IEEE Std 1244.2-2000 Media Management Systems (MMS) Session Security, Authentication, Initialization Protocol.pdf249. IEEE Std 1244.2-2000 IEEE Standard for Media Management Systems (MMS) Session Security, Authentication, Initialization Proto.pdf250. IEEE Std 1244.3-2000 IEEE standard for media management system (MMS) media management protocol (MMP).pdf251. IEEE Std 1244.4-2000 IEEE Standard for Media Management Systems (MMS) Drive Management Protocol (DMP).pdf252. IEEE Std 1244.4-2000 Standard for Media Management System (MMS) Drive Management Protocol (DMP).pdf253. IEEE Std 1246-1997 Guide for Temporary Protective Grounding Systems Used in Substations.pdf254. IEEE Std 1246-1997 IEEE guide for temporary protective grounding systems used in substations.pdf255. IEEE Std 1246-2002 (Revision of IEEE Std 1246-1997) IEEE guide for temporary protective grounding systems used in substation.pdf256. IEEE Std 1247-1998 IEEE standard for interrupter switches for alternating current, rated above 1000 volts.pdf257. IEEE Std 1249-1996 IEEE guide for computer-based control for hydroelectric power plant automation.pdf258. IEEE Std 1250-1995 Guide for Service to Equipment Sensitive to Momentary Voltage Disturbances.pdf259. IEEE Std 1260-1996 Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines.pdf260. IEEE Std 1260-1996 IEEE guide on the prediction, measurement, and analysis of AM broadcast reradiation by power lines.pdf.pdf261. IEEE Std 1262-1995 IEEE recommmended practice for qualification of photovoltaic (PV) modules.pdf262. IEEE Std 1264-1993 IEEE guide for animal deterrents for electric power supply substations.pdf263. IEEE Std 1264-1993 Guide for Animal Deterrents for Electric Power Supply Substations.pdf264. IEEE Std 1267-1999 IEEE trial-use guide for development of specifications for turnkey substation projects.pdf265. IEEE Std 1267-1999 Trial-Use Guide for Development of Specification for Turnkey Substation Projects.pdf266. IEEE Std 1268-1997 Guide for the Safe Installation of Mobile Substation Equipment.pdf267. IEEE Std 1268-2005 (Revision of IEEE Std 1268-1997) IEEE Guide for Safety in the Installation of Mobile Substation Equipment.pdf268. IEEE Std 1275-1994 IEEE standard for boot (initialization configuration) firmware- core requirements and practices.pdf269. IEEE Std 1275.1-1994 IEEE standard for boot (initialization configuration) firmware instruction set architecture (ISA) supplement for IEEE 1754.pdf270. IEEE Std 1275.2-1994 IEEE standard for boot (initialization configuration) firmware Bus supplement for IEEE 1496 (SBus).pdf271. IEEE Std 1276-1997 Guide for the Application of High-Temperature Insulation Materials.pdf272. IEEE Std 1276-1997 IEEE trial-use guide for the application of high-temperature insulation materials in liquid-immersed powe.pdf

273. IEEE Std 1278-1993 IEEE standard for information technology - protocols for distributed interactive simulations applications. Entity information and interaction.pdf274. IEEE Std 1278.1-1995 IEEE standard for distributed interactive simulation - application protocols.pdf275. IEEE Std 1278.2-1995 IEEE standard for distributed interactive simulation communication services and profiles.pdf276. IEEE Std 1284-1994 IEEE standard signaling method for a bidirectional parallel peripheral interface for personal computers.pdf277. IEEE Std 1284.1-1997 IEEE standard for information technology - Transport Independent Printer_System Interface (TIP_SI).pdf.pdf278. IEEE Std 1284.4-2000 IEEE standard for data delivery and logical channels for IEEE 1284 interfaces.pdf279. IEEE Std 1289-1998 Guide for the Application of Human Factors Engineering in the Design.pdf280. IEEE Std 1290-1996 IEEE Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear .pdf281. IEEE Std 1291-1993 Guide for Partial Discharge Measurement in Power Switchgear.pdf282. IEEE Std 1291-1993 IEEE guide for partial discharge measurement in power switchgear .pdf283. IEEE Std 1293-1998 IEEE standard specification format guide and test procedure for linear, single-axis, nongyroscopic accele.pdf284. IEEE Std 1299_C62.22.1-1 996 IEEE guide for the connection of surge arresters to protect insulated, shielded electric power .pdf285. IEEE Std 1300-1996 Guide for Cable Connections for Gas-Insulated Substations.pdf286. IEEE Std 1300-1996 IEEE guide for cable connections for gas-insulated substations.pdf287. IEEE Std 1301-1991 IEEE standard for a metric equipment practice for microcomputers coordination document.pdf288. IEEE Std 1301.1-1991 IEEE standard for a metric equipment practice for microcomputers convection-cooled with 2 mm connectors.pdf289. IEEE Std 1301.2-1993 IEEE recommended practices for the implementation of a metric equipment practice (IEEE Std 1301-1991).p.pdf290. IEEE Std 1301.2-1993 Recommended Practices for the Implementation of a Metric Equipment Practice.pdf291. IEEE Std 1301.3-1992 IEEE standard for a metric equipment practice for microcomputers convection-cooled with 2.5mm connector.pdf292. IEEE Std 1301.4-1996 IEEE Standard for a Metric Equipment Practice for Microcomputers-Coordination Document for Mezzanine Ca.pdf293. IEEE Std 1301.4-1996 Standard for a Metric Equipment Practice for Microcomputers.pdf294. IEEE Std 1302-1998 Guide for the Electromagnetic Characterization of Conductive Gaskets.pdf295. IEEE Std 1302-1998 IEEE guide for the electromagnetic characterization of conductive gaskets in the frequency range of DC to.pdf296. IEEE Std 1303-1994 Guide for Static Var Compensator Field Tests.pdf297. IEEE Std 1303-1994 IEEE guide for static VAr compensator field tests.pdf298. IEEE Std 1307-1996 IEEE trial use guide for fall protection for the utility industry .pdf299. IEEE Std 1308-1994 IEEE recommended practice for instrumentation- specifications for magnetic flux density and electric fiel.pdf300. IEEE Std 1309-1996 IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz.pdf301. IEEE Std 1309-2005 (Revision of IEEE Std 1309-1996) IEEE standard for calibration of electromagnetic field sensors and probe.pdf302. IEEE Std 1310-1996 IEEE trial use recommended practice for thermal cycle testing of form-wound stator bars and coils for lar.pdf303. IEEE Std 1310-1996 Trial Use Recommended Practice for Thermal Cycle Testing of Form.pdf304. IEEE Std 1312-1993 IEEE standard preferred voltage ratings for alternating-current electrical systems and equipment operatin.pdf305. IEEE Std 1312-1993 Preferred Voltage Ratings for Alternating.pdf306. IEEE Std 1313-1993 IEEE standard for power systems - insulation coordination..pdf307. IEEE Std 1313.1-1996 IEEE standard for insulation coordination - definitions, principles, and rules.pdf308. IEEE Std 1313.1-1996 Standard for Insulation Coordination - Definitions, Principles, and Rules.pdf309. IEEE Std 1313.2-1999 Guide for the Application of Insulation Coordination.pdf310. IEEE Std 1313.2-1999 IEEE guide for the application of insulation coordination.pdf311. IEEE Std 1320.1-1998 IEEE standard for functional modeling language - syntax and semantics for IDEF0.pdf312. IEEE Std 1320.2-1998 IEEE standard for conceptual modeling language syntax and semantics for IDEF1X97 (IDEFobject).pdf313. IEEE Std 1325-1996 Recommended Practice for Reporting Field Failure Practice for Power Circuit Breakers.pdf314. IEEE Std 1326-1993 Test Methods for Measuring Conformance OSI Abstract Data Manipulation- API.pdf315. IEEE Std 1326.1-1993 Test Methods for Measuring Conformance to X.400-Based Electronic Messaging-API.pdf316. IEEE Std 1326.2-1993 IEEE Standard for Information Technology - Test Methods for Measuring Conformance to Directory Servi.pd.pdf317. IEEE Std 1327-1993 Open systems interconnection (OSI) Abstract Data Manipulation C Language Interfaces-Binding for API.pdf.pdf318. IEEE Std 1327.1-1993 X.400-based electronic messaging C language Interfaces-Binding for API.pdf319. IEEE Std 1327.2-1993 IEEE standard for information technology - directory services C Language Interfaces-Binding for Appl.pd.pdf320. IEEE Std 1328-1993 Measuring Conformance to Open Systems Interconnection (OSI) Abstract Data Manipulation C Language In.pdf.pdf321. IEEE Std 1332-1998 IEEE standard reliability program for the development and production of electronic systems and equipment..pdf322. IEEE Std 1333-1994 Guide for Installation of Cable Using the Guided Boring Method.pdf323. IEEE Std 1344-1995 Standard for Synchrophasors for Power Systems.pdf324. IEEE Std 1344-1995 Standard for Synchrophasors for Power Systems.pdf325. IEEE Std 1344-1995(R2001) IEEE standard for synchrophasors for power systems.pdf326. IEEE Std 1346-1998 IEEE recommended practice for evaluating electric power system compatibility with electronic process equi.pdf327. IEEE Std 1348-1995 IEEE recommended practice for the adoption of Computer-Aided Software Engineering (CASE) tools.pdf328. IEEE Std 1348-1995 Recommended practice for the adoption of Computer-Aided Software Engineering tools.pdf329. IEEE Std 1361-2003 IEEE guide for selection, charging, test, and evaluation of lead-acid batteries used in stand-alone photo.pdf330. IEEE Std 1362-1998 Guide for Information Technology - System Definition - Concept of Operations Document.pdf331. IEEE Std 1364-2001 IEEE standard Verilog hardware description language.pdf332. IEEE Std 1364.1-2002 IEEE Std. 1364.1 - 2002 IEEE Standard for Verilog Register Transfer Level Synthesis.pdf333. IEEE Std 1366, 2001 Edition IEEE guide for electric power distribution reliability indices.pdf334. IEEE Std 1366-1998 IEEE trial-use guide for electric power distribution reliability indices.pdf335. IEEE Std 1366-2001 Guide for Electric Power Distribution Reliability Indices.pdf336. IEEE Std 1374-1998 IEEE guide for terrestrial photovoltaic power system safety.pdf337. IEEE Std 1377-1997 IEEE standard for utility industry end device data tables.pdf338. IEEE Std 1378-1997 Guide for Commissioning High-Voltage Direct-Current (HVDC) Converter Stations.pdf339. IEEE Std 1378-1997 IEEE guide for commissioning High-Voltage Direct-Current (HVDC) converter stations and associated transmi.pdf340. IEEE Std 1379-1997 Recommended Practice for Data Communications between Remote Terminal Units.pdf

341. IEEE Std 1386-2001 IEEE standard for a common mezzanine card (CMC) family.pdf342. IEEE Std 1386.1-2001 Common mezzanine card (CMC) family and physical and environmental layers for PCI mezzanine.pdf343. IEEE Std 1387.3-1996 IEEE standard for information technology - Portable Operating System Interface (POSIX(R)) system admini.pdf344. IEEE Std 1388-2000 IEEE Standard for the Electronic Reporting of Transformer Test Data.pdf345. IEEE Std 1388-2000 Standard for the Electronic Reporting of Transformer Test Data.pdf346. IEEE Std 1390-1995 IEEE standard for utility telemetry service architecture for switched telephone network.pdf347. IEEE Std 1390.2-1999 Standard for Automatic Meter Reading Via Telephone - Network to Telemetry Interface Unit.pdf348. IEEE Std 1390.3-1999 IEEE standard for automatic meter reading via telephone - network to utility controller.pdf349. IEEE Std 1393-1999 IEEE standard for spaceborne fiber-optic data bus.pdf350. IEEE Std 1394-1995 IEEE standard for a high performance serial bus.pdf351. IEEE Std 1394.1-2004 IEEE Standard for High Performance Serial Bus Bridges.pdf352. IEEE Std 1394.3-2003 IEEE Std 1394.3 - 2003 - IEEE Standard for a High Performance Serial Bus Peer-to-Peer Data Transport Pr.pdf353. IEEE Std 1394b-2002 (Amendment to IEEE Std 1394-1995) IEEE Std. 1394b - 2002 IEEE Standard for a High-Performance Serial Bus.pdf354. IEEE Std 140-1950 IEEE recommended practice for minimization of interference from radio-frequency heating equipment.pdf355. IEEE Std 1402-2000 Guide for Electric Power Substation Physical and Electronic Security.pdf356. IEEE Std 1404-1998 Guide for Microwave Communications System Development.pdf357. IEEE Std 1404-1998 IEEE guide for microwave communications system development- design, procurement, construction, maintenanc.pdf358. IEEE Std 1406-1998 IEEE trial-use guide to the use of gas-in-fluid analysis for electric power cable systems.pdf359. IEEE Std 141-1993 IEEE recommended practice for electric power distribution for industrial plants.pdf360. IEEE Std 1410-1997 IEEE guide for improving the lightning performance of electric power overhead distribution lines.pdf361. IEEE Std 1410-2004 (Revision of IEEE Std 1410-1997) IEEE guide for improving the lightning performance of electric power ove.pdf362. IEEE Std 1413-1998 IEEE standard methodology for reliability prediction and assessment for electronic systems and equipment..pdf363. IEEE Std 1413-1998 Methodology for Reliability Prediction and Assessment for Electronic Systems.pdf364. IEEE Std 1413.1-2002 IEEE Std 1413.1 - 2002.pdf365. IEEE Std 14143.1-2000 Implementation Note for IEEE Adoption of IEC 14143-11998 Information Technology.pdf366. IEEE Std 1416-1998 IEEE recommended practice for the interface of new gas-insulated equipment in existing gas-insulated subs.pdf367. IEEE Std 1416-1998 Recommended Practice for the Interface of New Gas-Insulated Equipment.pdf368. IEEE Std 142-1991 IEEE recommended practice for grounding of industrial and commercial power systems.pdf369. IEEE Std 1420.1-1995 (IEEE standard for information technology - software reuse - dat... IEEE standard for information techn.pdf370. IEEE Std 1420.1-1995 Standard for Information Technology - Software Reuse - Data Model for Reuse.pdf371. IEEE Std 1420.1b-1999 IEEE trial-use supplement to IEEE standard for information technology - software reuse - data model fo.pdf372. IEEE Std 1420.1b-1999 Software Reuse - Data Model for Reuse Library Interoperability.pdf373. IEEE Std 1430-1996 IEEE guide for information technology - software reuse - concept of operations for interoperating reuse l.pdf374. IEEE Std 1441-2004 IEEE Guide for Inspection of Overhead Transmission Line Construction.pdf375. IEEE Std 1445-1998 IEEE standard for Digital Test Interchange Format (DTIF).pdf376. IEEE Std 145-1983 IEEE standard definitions of terms for antennas.pdf377. IEEE Std 145-1993 Standard Definitions of Terms for Antennas.pdf378. IEEE Std 1451.4-2004 IEEE Standard for A Smart Transducer Interface for Sensors and Actuators - Mixed-Mode Communication Pro.pdf379. IEEE Std 1455-1999 IEEE standard for message sets for vehicle_roadside communications.pdf380. IEEE Std 1460-1996 Guide for the Measurement of Quasi-Static Magnetic and Electric Fields.pdf381. IEEE Std 1460-1996 IEEE guide for the measurement of quasi-static magnetic and electric fields.pdf382. IEEE Std 1462-1998 Information technology - guideline for the evaluation and selection of CASE tools.pdf383. IEEE Std 147-1979 IEEE standard definitions of terms for waveguide components.pdf384. IEEE Std 1471-2000 IEEE Recommended practice for architectural description of software-intensive systems.pdf385. IEEE Std 1471-2000 Recommended Practice for Architectural Description of Software-Intensive Systems.pdf386. IEEE Std 1473-1999 IEEE standard for communications protocol aboard trains.pdf387. IEEE Std 1473-1999 Standard for Communications Protocol Aboard Trains.pdf388. IEEE Std 1474.1-1999 Communications - Based Train Control (CBTC) Performance and Functional Requirements.pdf389. IEEE Std 1474.1-1999 IEEE standard for Communications-Based Train Control (CBTC) performance and functional requirements.pdf.pdf390. IEEE Std 1474.2-2003 Communications - Based Train Control (CBTC) Performance and Functional Requirements.pdf391. IEEE Std 1474.2-2003 IEEE standard for user interface requirements in communications-based train control (CBTC) systems.pdf.pdf392. IEEE Std 1477-1998 Standard for Passenger Information System for Rail Transit Vehicles.pdf393. IEEE Std 1481-1999 IEEE standard for integrated circuit (IC) delay and power calculation system.pdf394. IEEE Std 1482.1-1999 Standard for Rail Transit Vehicle Event Recorders.pdf395. IEEE Std 1483-2000 IEEE standard for verification of vital functions in processor-based systems used in rail transit control.pdf396. IEEE Std 1483-2000 Standard for Verification of Vital Functions in Processor-Based Systems Used in Rail Transit.pdf397. IEEE Std 1484.1-2003 IEEE standard for learning technology-learning technology systems architecture (LTSA).pdf398. IEEE Std 1484.11.1-2004 IEEE Std 1484.11.1 - 2004 IEEE Standard for Learning Technology - Data Model for Content to Learning.pdf399. IEEE Std 1484.11.2-2003 Standard for Learning Object Metadata IEEE Computer Society.pdf400. IEEE Std 1484.12.1-2002 Standard for Learning Object Metadata IEEE Computer Society.pdf401. IEEE Std 1484.12.3-2005 IEEE Standard for Learning Technology-Extensible Markup Language (XML) Schema Definition Language Bi.pdf402. IEEE Std 1488-2000 Trial-Use Standard for Message Set Template for Intelligent Transportation Systems.pdf403. IEEE Std 1489-1999 Data Dictionaries for Intelligent Transportation Systems 智能运送系统数据库.pdf404. IEEE Std 1489-1999 Standard for Data Dictionaries for Intelligent Transportation Systems.pdf405. IEEE Std 1490-1998 IEEE guide - adoption of PMI standard - a guide to the project management body of knowledge.pdf406. IEEE Std 1490-2003 (Revision of IEEE Std 1490-1998) IEEE Guide Adoption of PMI Standard A Guide to the Project Management Bo.pdf407. IEEE Std 1491-2005 IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications.pdf408. IEEE Std 1499-1998 IEEE standard interface for hardware description models of electronic components.pdf

409. IEEE Std 1500-2005 IEEE Standard Testability Method for Embedded Core-based Integrated Circuits.pdf410. IEEE Std 1511-2004 IEEE Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated .pdf411. IEEE Std 1512-2000 IEEE Standard for Common Incident Management Message Sets for Use by Emergency Management Centers.pdf412. IEEE Std 1512.1-2003 IEEE Standard for Traffic Incident Management Message Sets for Use by Emergency Management Centers.pdf.pdf413. IEEE Std 1512.2-2004 IEEE Standard for Public Safety Traffic Incident Management Message Sets for Use by Emergency Managemen.pdf414. IEEE Std 1512.3-2002 IEEE Std 1512.3 - 2002 IEEE Standard for Hazardous Material Incident Management Message Sets for Use by.pdf415. IEEE Std 1515-2000 IEEE Recommended Practice for Electronic Power Subsystems- Parameter Definitions, Test Conditions, and Te.pdf416. IEEE Std 1516.1-2000 IEEE Standard for Modeling and Simulation [M and S] High Level Architecture [HLA] - Federate Interface .pdf417. IEEE Std 1516.3-2003 IEEE Std. 1516.3.pdf418. IEEE Std 1517-1999 Information Technology - Software Life Cycle Processes - Reuse Processes.pdf419. IEEE Std 1517-1999(R2004) IEEE Standard for Information Technology - Software Life Cycle Processes - Reuse Processes.pdf420. IEEE Std 152-1991 IEEE standard for audio program level measurement.pdf421. IEEE Std 1521-2003 IEEE Trial-Use Standard for Measurement of Video Jitter and Wander.pdf422. IEEE Std 1521-2003.pdf423. IEEE Std 1523-2002 IEEE Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanizing (RTV) Silicon.pdf424. IEEE Std 1526-2003 IEEE recommended practice for testing the performance of stand-alone photovoltaic systems.pdf425. IEEE Std 1528-2003 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the .pdf426. IEEE Std 15288-2004 (Adoption of ISO_IEC Std 15288-2002) Adoption of ISO_IEC 15288-2002 Systems Engineering - System Life Cy.pdf427. IEEE Std 1531-2003 IEEE Guide for Application and Specification of Harmonic Filters.pdf428. IEEE Std 1532-2001 IEEE standard for in-system configuration of programmable devices.pdf429. IEEE Std 1532-2002 (Revision of IEEE Std 1532-2001) IEEE Standard for In-System Configuration of Programmable Devices.pdf.pdf430. IEEE Std 1534-2002 IEEE Recommended Practice for Specifying Thyristor-Controlled Series Capacitors.pdf431. IEEE Std 1536-2002 IEEE Standard for Rail Transit Vehicle Battery Physical Interface.pdf432. IEEE Std 1538-2000 IEEE Guide for Determination of Maximum Winding Temperature Rise in Liquid-Filled Transformers.pdf433. IEEE Std 1540-2001 IEEE Standard for Software Life Cycle Processes - Risk Management.pdf434. IEEE Std 1540-2001 Standard for Software Life Cycle Processes - Risk Management.pdf435. IEEE Std 1541-2002 IEEE Trial-Use Standard for Prefixes for Binary Multiples.pdf436. IEEE Std 1541-2002 Trial-Use Standard for Prefixes for Binary Multiples.pdf437. IEEE Std 1545-1999 IEEE standard for parametric data log format.pdf438. IEEE Std 1545-1999 Standard for Parametric Data Log Format.pdf439. IEEE Std 1546-2000 IEEE guide for digital test interchange format (DTIF) application .pdf440. IEEE Std 1547-2003 IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems.pdf441. IEEE Std 1547-2003 Standard for Interconnecting Distributed Resources with Electric Power Systems.pdf442. IEEE Std 1547.1-2005 IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems.pdf443. IEEE Std 155-1960 IEEE standards on circuits- definitions of terms for linear signal flow graphs, 1960.pdf444. IEEE Std 155-1960.pdf445. IEEE Std 1553-2002 IEEE trial-use standard for voltage-endurance testing of form-wound coils and bars for hydrogenerators.pd.pdf446. IEEE Std 1553-2002 Trial-Use Standard for Voltage- Endurance Testing of Form-Wound Coils and Bars.pdf447. IEEE Std 1558-2004 IEEE Standard for Software Documentation for Rail Equipment and Systems.pdf448. IEEE Std 1570-2002 IEEE Standard for the Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail In.pdf449. IEEE Std 1572-2004 IEEE Guide for Application of Composite Line Post Insulators.pdf450. IEEE Std 1572-2004.pdf451. IEEE Std 1584a-2004 Guide for Performing Arc-Flash Hazard Calculations CD Rom.pdf452. IEEE Std 1585-2002 Guide for Functional Specification of Medium Voltages Electronic Series Devices.pdf453. IEEE Std 1590-2003 IEEE recommended practice for the electrical protection of optical fiber communication facilities serving.pdf454. IEEE Std 1596-1992 IEEE standard for scalable coherent interface (SCI)..pdf455. IEEE Std 1596.3-1996 IEEE standard for Low-Voltage Differential Signals (LVDS) for Scalable Coherent Interface (SCI).pdf456. IEEE Std 1620-2004 IEEE standard test methods for the characterization of organic transistors and materials.pdf457. IEEE Std 1621-2004 IEEE Standard for User Interface Elements in Power Control of Electronic Devices Employed in Office_Consu.pdf458. IEEE Std 1623-2004 IEEE Guide for the Functional Specification of Medium Voltage (1 kV-35 kV) Electronic Shunt Devices for D.pdf459. IEEE Std 1641-2004 IEEE Standard for Signal and Test Definition.pdf460. IEEE Std 1646-2004 IEEE Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation.pdf461. IEEE Std 1650-2005 IEEE Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes.pdf462. IEEE Std 1666-2005 IEEE Std 1666 - 2005 IEEE Standard SystemC Language Reference Manual.pdf463. IEEE Std 167A-1987 IEEE standard facsimile test chart.pdf464. IEEE Std 167A-1987 Standard Facsimile Test Chart High Contrast.pdf465. IEEE Std 167A.1-1995 IEEE Standard Facsimile Test Chart- Bilevel (Black and White).pdf466. IEEE Std 167A.2-1996 IEEE standard facsimile test chart- high contrast (gray scale).pdf467. IEEE Std 1725-2006 IEEE Std 1725 - 2006 IEEE Standard for Rechargeable Batteries for Cellular Telephones.pdf468. IEEE Std 1754-1994 IEEE standard for a 32-bit microprocessor architecture.pdf469. IEEE Std 18-1992 IEEE standard for shunt power capacitors.pdf470. IEEE Std 18-2002 IEEE Standard for Shunt Power Capacitors.pdf471. IEEE Std 18-2002 Shunt power capacitors.pdf472. IEEE Std 1800-2005 IEEE Standard for SystemVerilog- Unified Hardware Design, Specification, and Verification Language.pdf.pdf473. IEEE Std 1802.3-1991 Conformance test methodology for IEEE standards for local and metropolitan area networks- carrier sense.pdf474. IEEE Std 1802.3-1991 standards for local and metropolitan area networks.pdf475. IEEE Std 1802.3d-1993 Type 10BaseT MAU Conformance Test Methodology (Section 6).pdf476. IEEE Std 181-2003 IEEE standard on transitions, pulses, and related waveforms.pdf

477. IEEE Std 182-1961 IEEE standards on radio transmitters- definitions of terms.pdf478. IEEE Std 183-1958 IEEE technical committee report- methods for testing radiotelegraph transmitters (below 50 MC).pdf479. IEEE Std 1850-2005 IEEE Standard for Property Specification Language (PSL).pdf480. IEEE Std 187-1990 IEEE standard on radio receivers- open field method of measurement of spurious radiation from FM and telev.pdf481. IEEE Std 194-1977 IEEE standard pulse terms and definitions.pdf482. IEEE Std 2001-1999 IEEE recommended practice for internet practices - Web page engineering - intranet_extranet applications..pdf483. IEEE Std 2001-2002 (Revision of IEEE Std 2001-1999) IEEE Recommended Practice for the Internet - Web Site Engineering, Web S.pdf484. IEEE Std 2003-1997 IEEE standard for information technology - requirements and guidelines for test methods specifications an.pdf485. IEEE Std 2003.1-1992 IEEE Standard For Information Technology - test Methods For Measuring Conformance To Posix-part 1- Syst.pdf486. IEEE Std 2003.2-1996 IEEE standard for information technology -Test methods for measuring conformance to POSIX - part 2- she.pdf487. IEEE Std 205-2001 Standard on Television Measurement of Luminance Signal Levels.pdf488. IEEE Std 208-1995 IEEE standard on video techniques- measurement of resolution of camera systems, 1993 techniques.pdf489. IEEE Std 211-1990 IEEE standard definitions of terms for radio wave propagation.pdf490. IEEE Std 211-1997 IEEE standard definitions of terms for radio wave propagation.pdf491. IEEE Std 216-1960 IEEE Standards On Solid-State Devices- Definitions Of Semiconductor Terms.pdf492. IEEE Std 252-1977 IEEE test procedure for polyphase induction motors having liquid in the magnetic gap.pdf493. IEEE Std 252-1995 IEEE standard test procedure for polyphase induction motors having liquid in the magnetic gap.pdf494. IEEE Std 252-1995 Standard Test Procedure for Polyphase Induction Motors Having Liquid.pdf495. IEEE Std 255-1963 IEEE standard letter symbols for semiconductor devices.pdf496. IEEE Std 259-1994 IEEE standard test procedure for evaluation of systems of insulation for specialty transformers.pdf497. IEEE Std 259-1999 IEEE standard test procedure for evaluation of systems of insulation for dry-type specialty and general-pu.pdf498. IEEE Std 259-1999 Test Procedure for Evaluation of Systems of Insulation.pdf499. IEEE Std 267 IEEE trial-use recommended practice for the preparation and use of symbols.pdf500. IEEE Std 267-1966 Proposed Recommended Practice for the Preparation and Use of Symbols Published for Trial Use.pdf501. IEEE Std 268A-1980 IEEE Std 268A-1980 (SH07708).pdf502. IEEE Std 269-1992 IEEE standard methods for measuring transmission performance of analog and digital telephone sets.pdf503. IEEE Std 269-2002 (Revision of IEEE Std 269-1992) IEEE standard methods for measuring transmission performance of analog and.pdf504. IEEE Std 269-2002 IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets.pdf505. IEEE Std 274-1966 Standard Definitions Of Terms For Integrated Electronics.pdf506. IEEE Std 277-1994 IEEE recommended practice for cement plant power distribution.pdf507. IEEE Std 281-1984 IEEE Standard Service Conditions For Power System Communication Equipment.pdf508. IEEE Std 290-1980 IEEE standard for electric couplings. Part I - general, rating, performance characteristics. Part II - tes.pdf509. IEEE Std 291-1991 IEEE standard methods for measuring electromagnetic field strength of sinusoidal continuous waves, 30 Hz t.pdf510. IEEE Std 299-1991 IEEE standard for measuring the effectiveness of electromagnetic sheilding enclosures.pdf511. IEEE Std 299-1997 IEEE standard method for measuring the effectiveness of electromagnetic shielding enclosures.pdf512. IEEE Std 300-1988 IEEE standard test procedures for semiconductor charged-particle detectors.pdf513. IEEE Std 300-1988 Standard Test Procedures for Semiconductor Charged-Particle Detectors.pdf514. IEEE Std 301-1976 IEEE standard test procedures for amplifiers and preamplifiers for semiconductor radiation detectors for i.pdf515. IEEE Std 301-1988 IEEE standard test procedures for amplifiers and preamplifiers used with detectors of ionizing radiation.p.pdf516. IEEE Std 302-1969 IEEE standard methods for measuring electromagnetic field strength for frequencies below 1000 MHz in radio.pdf517. IEEE Std 303-1991 IEEE recommended practice for auxiliary devices for motors in class 1, groups A, B, C, and D, division 2 l.pdf518. IEEE Std 303-2004 (Revision of IEEE Std 303-1991) IEEE Std 303 - 2004 IEEE Recommended Practice for Auxiliary Devices for Ro.pdf519. IEEE Std 303-2004 303TM IEEE Recommended Practice for Auxiliary Devices for Rotating.pdf520. IEEE Std 303-2004 Recommended Practice for Auxiliary Devices for Motors in Class I.pdf521. IEEE Std 308-1991 IEEE standard criteria for class 1E power systems for nuclear power generating stations.pdf522. IEEE Std 309-1999- ANSI N42.3-1999 IEEE standard test procedures and bases for Geiger-Mueller counters .pdf523. IEEE Std 314-1971 IEEE standards report on state of the art of measuring. Unbalance transmission-line impedance.pdf524. IEEE Std 317-1983 IEEE standard for electric penetration assemblies in containment structures for nuclear power generating s.pdf525. IEEE Std 323-1983 IEEE standard for qualifying Class 1E equipment for nuclear power generating stations.pdf526. IEEE Std 323-2003 (Revision of IEEE Std 323-1983) IEEE Std. 323 _sup TM_ IEEE standard for qualifying class 1E equipment for.pdf527. IEEE Std 325-1996 IEEE standard test procedures for germanium gamma-ray detectors.pdf528. IEEE Std 334-1994 IEEE standard for qualifying continuous duty class 1E motors for nuclear power generating stations.pdf529. IEEE Std 334-1994 Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations.pdf530. IEEE Std 336-2005 (Revision of IEEE Std 336-1985) IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, I.pdf531. IEEE Std 344-1987 IEEE recommended practice for seismic qualification of class 1E equipment for nuclear power generating sta.pdf532. IEEE Std 344-2004 (Revision of IEEE Std 344-1987) IEEE Std. 344 - 2004 IEEE Recommended Practice for Seismic Qualification o.pdf533. IEEE Std 356-1974 IEEE guide for radio methods of measuring earth conductivity.pdf534. IEEE Std 356-2001 (Revision of IEEE Std 356-1974) IEEE Guide for Measurements of Electromagnetic Properties of Earth Media.p.pdf535. IEEE Std 367-1996 IEEE recommended practice for determining the electric power station ground potential rise and induced vol.pdf536. IEEE Std 377-1980 IEEE Recommended practice for measurement of spurious emission from land-mobile communication transmitters.pdf537. IEEE Std 377-1980 Recommended Practice for Measurement of Spurious Emission from Land-MobileTransmitters.pdf538. IEEE Std 379-2000 Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety.pdf539. IEEE Std 382-1985 IEEE standard for qualification of actuators for power operated valve assemblies with safety-related funct.pdf540. IEEE Std 384-1992 IEEE standard criteria for independence of Class 1E equipment and circuits.pdf541. IEEE Std 386-1995 IEEE standard for separable insulated connector systems for power distribution systems above 600 V.pdf542. IEEE Std 387-1995 Standard Criteria for Diesel-Generator Units Applied as Standby Power Generating Stations.pdf543. IEEE Std 388-1992 IEEE standard for transformers and inductors in electronic power conversion equipment.pdf544. IEEE Std 389-1979 IEEE recommended practice for testing electronic transformers and inductors.pdf

545. IEEE Std 389-1990 IEEE recommended practice for testing electronic transformers and inductors.pdf546. IEEE Std 393-1977 IEEE standard test procedures for magnetic cores.pdf547. IEEE Std 393-1991 IEEE standard for test procedures for magnetic cores.pdf548. IEEE Std 399-1990 IEEE recommended practice for industrial and commercial power systems analysis.pdf549. IEEE Std 399-1997 IEEE recommended practice for industrial and commercial power systems analysis.pdf550. IEEE Std 4-1995 IEEE Std 4-1995 (revision Of IEEE Std 4-1 978) IEEE Standard Techniques For High-voltage Testing.pdf551. IEEE Std 400-1991 IEEE guide for making high-direct-voltage tests on power cable systems in the field.pdf552. IEEE Std 400.2-2004 IEEE guide for field testing of shielded power cable systems using very low frequency (VLF).pdf553. IEEE Std 404-1993 Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V.pdf554. IEEE Std 404-1993 IEEE standard for cable joints for use with extruded dielectric cable rated 5000-138000 V and cable.pdf.pdf555. IEEE Std 404-2000 Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V.pdf556. IEEE Std 404-2000 IEEE standard for extruded and laminated dielectric shielded cable joints rated 2500 V to 500 000 V.pdf.pdf557. IEEE Std 420-1982 IEEE Standard For The Design And Qualification Of Class 1E Control Boards, Panels, And Racks Used In Nucle.pdf558. IEEE Std 420-1982 the Design and Qualification of Class 1E Control Boards, Panels, and Racks.pdf559. IEEE Std 421.3-1997 Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines.pdf560. IEEE Std 421.4-1990 Guide for the Preparation of Excitation System Specifications.pdf561. IEEE Std 421.5-1992 IEEE recommended practice for excitation system models for power system stability studies.pdf562. IEEE Std 421[1].4-2004 IEEE Guide for the Preparation of Excitation System Specifications.pdf563. IEEE Std 428-1981 IEEE standard definitions and requirements for thyristor AC power controllers.pdf564. IEEE Std 429-1994 IEEE recommended practice for thermal evaluation of sealed insulation systems for AC electric machinery em.pdf565. IEEE Std 432-1992 IEEE guide for insulation maintenance for rotating electric machinery (5 hp to less than 10 000 hp).pdf.pdf566. IEEE Std 436-1977 IEEE guide for making corona (partial discharge) measurements on electronics transformers.pdf567. IEEE Std 436-1991 IEEE guide for making corona (partial discharge) measurements on electronics transformers.pdf568. IEEE Std 442-1981 IEEE guide for soil thermal resistivity measurements.pdf569. IEEE Std 446-1995 [The Orange Book] IEEE Recommended Practice For Emergency And Standby Power Systems For Industrial And Com.pdf570. IEEE Std 449-1990 IEEE standard for ferroresonant voltage regulators.pdf571. IEEE Std 449-1998 IEEE standard for ferroresonant voltage regulators.pdf572. IEEE Std 449-1998 Standard for Ferroresonant Voltage Regulators.pdf573. IEEE Std 45-1998 IEEE recommended practice for electric installations on shipboard .pdf574. IEEE Std 45-2002 (Revision of IEEE Std 45-1998) IEEE Recommended Practice for Electrical Installations on Shipboard.pdf575. IEEE Std 450-1995 Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries.pdf576. IEEE Std 450-2002 IEEE recommended practice for maintenance, testing, and replacement of vented lead-acid batteries for stat.pdf577. IEEE Std 470-1972 IEEE standard application guide for bolometric power meters.pdf578. IEEE Std 473-1985 IEEE recommended practice for an electromagnetic site survey (10 kHz to 10 GHz).pdf579. IEEE Std 475-2000 IEEE standard measurement procedure for field disturbance sensors 300 MHz to 40 GHz.pdf580. IEEE Std 475-2000 Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz.pdf581. IEEE Std 48-1996 IEEE standard test procedures and requirements for alternating-current cable terminators 2.5 kV through 756.pdf582. IEEE Std 48-1996 Standard Test Procedures and Requirements for Alternating-Current Cable Terminations.pdf583. IEEE Std 484-2002 (Revision of IEEE Std 484-1996) IEEE Recommended Practice for Installation Design And Installation of Vent.pdf584. IEEE Std 485-1983 IEEE Recommended Practice For Sizing Large Lead Storage Batteries For Generating Stations And Substations..pdf585. IEEE Std 488.2-1992 IEEE standard codes, formats, protocols, and common commands for use with IEEE Std 488.1-1987, IEEE stan.pdf586. IEEE Std 493-1990 IEEE recommended practice for the design of reliable industrial and commercial power systems.pdf587. IEEE Std 497-2002 (Revision of IEEE Std 497-1981) IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear.pdf588. IEEE Std 497-2002 Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Sta.pdf589. IEEE Std 498-1990 IEEE standard requirements for the calibration and control of measuring and test equipment used in nuclear.pdf590. IEEE Std 499-1983 IEEE recommended practice for cement plant electric drives and related electrical equipment.pdf591. IEEE Std 499-1997 IEEE recommended practice for cement plant electric drives and related electrical equipment.pdf592. IEEE Std 499-1997 Recommended Practice for Cement Plant Electric Drives and Related Electrical Equipment.pdf593. IEEE Std 4a-2001 Amendment to IEEE standard techniques for high-voltage testing.pdf594. IEEE Std 500-1984 A Discussion of the Term Failure Mode.pdf595. IEEE Std 515-1997 IEEE standard for the testing, design, installation, and maintenance of electrical resistance heat tracing.pdf596. IEEE Std 515-2004 (Revision of IEEE Std 515-1997) IEEE standard for the testing, design, installation, and maintenance of el.pdf597. IEEE Std 515.1-1995 IEEE recommended practice for the testing, design, installation, and maintenance of electrical resistanc.pdf598. IEEE Std 516-2003 (Revision of IEEE Std 516-1995) IEEE guide for maintenance methods on energized power lines.pdf599. IEEE Std 517-1974 IEEE standard specification format guide and test procedure for single-degree-of-freedom rate-integrating .pdf600. IEEE Std 519-1992 IEEE recommended practices and requirements for harmonic control in electrical power systems.pdf601. IEEE Std 521-1984 Standard Letter Designations for Radar-Frequency Bands.pdf602. IEEE Std 521-2002 (Revision of IEEE Std 521-1984) IEEE Std 521 - 2002.pdf603. IEEE Std 521-2002 Standard Letter Designations for Radar-Frequency Bands.pdf604. IEEE Std 522-1992 Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils.pdf605. IEEE Std 522-2004 (Revision of IEEE Std 522-1992) IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alte.pdf606. IEEE Std 522-2004 Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils.pdf607. IEEE Std 525-1992 Guide for the Design and Installation of Cable Systems in Substations.pdf608. IEEE Std 525-1992 IEEE guide for the design and installation of cable systems in substations.pdf609. IEEE Std 528-2000 Standard for Inertial Sensor Terminology.pdf610. IEEE Std 528-2001 Standard for Inertial Sensor Terminology.pdf611. IEEE Std 529-1980 Supplement of strapdown applications to IEEE standard specification format guide and test.pdf612. IEEE Std 532-1993 Guide for Selecting and Testing Jackets for Underground Cables.pdf

613. IEEE Std 539-1990 IEEE standard definitions of terms relating to corona and field effects of overhead power lines.pdf614. IEEE Std 539-2005 (Revision of IEEE Std 539-1990) IEEE Standard Definitions of Terms Relating to Corona and Field Effects of.pdf615. IEEE Std 55-1953 IEEE guide for temperature correlation in the connection of insulated wire and cables to electronic equipme.pdf616. IEEE Std 576-2000 IEEE recommended practice for installation, termination, and testing of insulated power cable as used in i.pdf617. IEEE Std 577-2004 Requirements for Reliability Analysis in the Design and Operation of Safety Systems.pdf618. IEEE Std 592-1977 Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints.pdf619. IEEE Std 602-1996 [The White Book] IEEE Recommended Practice for Electric Systems in Health Care Facilities.pdf620. IEEE Std 603-1980 IEEE standard criteria for safety systems for nuclear power generating stations.pdf621. IEEE Std 603-1998 IEEE standard criteria for safety systems for nuclear power generating stations.pdf622. IEEE Std 605-1998 IEEE guide for design of substation rigid-bus structures.pdf623. IEEE Std 610 IEEE standard computer dictionary. A compilation of IEEE standard computer glossaries.pdf624. IEEE Std 610.10-1994 IEEE standard glossary of computer hardware terminology.pdf625. IEEE Std 610.12-1990 IEEE standard glossary of software engineering terminology.pdf626. IEEE Std 610.3-1989 IEEE standard glossary of modeling and simulation terminology.pdf627. IEEE Std 610.4-1990 IEEE standard glossary of image processing and pattern recognition terminology.pdf628. IEEE Std 610.5-1990 IEEE standard glossary of data management terminology.pdf629. IEEE Std 610.7-1995 IEEE standard glossary of computer networking terminology.pdf630. IEEE Std 62-1978 IEEE guide for field testing power apparatus insulation.pdf631. IEEE Std 62-1995 IEEE guide for diagnostic field testing of electric power apparatus - part 1- oil filled power transformers.pdf632. IEEE Std 620-1987 Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines.pdf633. IEEE Std 620-1987 IEEE guide for construction and interpretation of thermal limit curves for squirrel-cage motors over 500 h.pdf634. IEEE Std 620-1996 Guide for the Presentation of Thermal Limit Curves.pdf635. IEEE Std 620-1996 IEEE guide for the presentation of thermal limit curves for squirrel cage induction machines.pdf636. IEEE Std 622-1987 IEEE recommended practice for the design and installation of electric heat tracing systems for nuclear pow.pdf637. IEEE Std 622-1987 Recommended Practice for the Design and Installation of Electric Heat Tracing Systems.pdf638. IEEE Std 622A-1984 IEEE recommended practice for the design and installation of electric pipe heating control and alarm syst.pdf639. IEEE Std 622B-1988 Recommended Practice for Testing and Startup Procedures for Electric Heat Tracing Systems.pdf640. IEEE Std 625-1979 IEEE recommended practices to improve electrical maintenance and safety in the cement industry.pdf641. IEEE Std 625-1990 Recommended Practices to Improve Electrical Maintenance and Safety in the Cement Industry.pdf642. IEEE Std 625-2001 IEEE recommended practices to improve electrical maintenance and safety in the cement industry.pdf643. IEEE Std 628-2001 IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Cir.pdf644. IEEE Std 634-2004 (Revision of IEEE Std 634-1978) IEEE Standard Cable-Penetration Fire Stop Qualification Test.pdf645. IEEE Std 635-1989 Guide for Selection and Design of Aluminum Sheaths for Power Cables.pdf646. IEEE Std 635-1989 IEEE guide for selection and design of aluminum sheaths for power cables.pdf647. IEEE Std 635-2003 (Revision of IEEE Std 635-1989) IEEE guide for selection and design of aluminum sheaths for power cables.p.pdf648. IEEE Std 638-1992 IEEE standard for qualification of class 1E transformers for nuclear power generating stations.pdf649. IEEE Std 638-1992 Qualification of Class 1E Transformers for Nuclear Power Generating Stations Corrections.pdf650. IEEE Std 640-1985 IEEE guide for power-station noise control.pdf651. IEEE Std 643-2004 (Revision of IEEE Std 643-1980) IEEE Guide for Power-Line Carrier Applications.pdf652. IEEE Std 644-1994 IEEE standard procedures for measurement of power frequency electric and magnetic fields from AC power lin.pdf653. IEEE Std 649-1991 IEEE standard for qualifying class 1E motor control centers for nuclear power generating stations.pdf654. IEEE Std 649-1991 Qualifying class 1E motor control centers for nuclear power generating stations.pdf655. IEEE Std 650-1990 IEEE standard for qualification of class 1E static battery chargers and inverters for nuclear power genara.pdf656. IEEE Std 650-1990 Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power.pdf657. IEEE Std 656-1992 IEEE standard for the measurement of audible noise from overhead transmission lines.pdf658. IEEE Std 656-1992 Standard for the Measurement of Audible Noise from Overhead Transmission Lines.pdf659. IEEE Std 662-1992 IEEE standard terminology for semiconductor memory.pdf660. IEEE Std 664-1980 IEEE guide on the measurement of the performance of aeolian vibration dampers for single conductors.pdf.pdf661. IEEE Std 665-1995 IEEE guide for generating station grounding.pdf662. IEEE Std 671-1985 IEEE Std 671-1985 IEEE Standard Specification Format Guide And Test Procedure For Nongyroscopic Inertial A.pdf663. IEEE Std 686-1990 IEEE standard radar definitions.pdf664. IEEE Std 686-1997 IEEE standard radar definitions.pdf665. IEEE Std 690-1984 IEEE Standard For The Design And Installation Of Cable Systems For Class 1E Circuits In Nuclear Power Gene.pdf666. IEEE Std 690-1984 Standard for the Design and Installation of Cable Systems for Class 1E Circuits.pdf667. IEEE Std 690-2004 (Revision of IEEE Std 690-1984) IEEE standard for the design and installation of cable systems for class 1.pdf668. IEEE Std 690-2004 Standard for the Design and Installation of Cable Systems for Class 1E Circuits.pdf669. IEEE Std 691 IEEE trial-use guide for transmission structure foundation design.pdf670. IEEE Std 691-2001 IEEE Guide For Transmission Structure Foundation Design And Testing.pdf671. IEEE Std 692-1986 IEEE standard criteria for security systems for nuclear power generating stations.pdf672. IEEE Std 692-1997 IEEE standard criteria for security systems for nuclear power generating stations.pdf673. IEEE Std 692-1997 Standard Criteria for Security Systems for Nuclear Power Generating Stations.pdf674. IEEE Std 693-1984 IEEE recommended practices for seismic design of substations.pdf675. IEEE Std 693-1997 IEEE recommended practice for seismic design of substations.pdf676. IEEE Std 7-4.3.2-1993 IEEE standard criteria for digital computers in safety systems of Nuclear Power Generating Stations.pd.pdf677. IEEE Std 7-4.3.2-2003 (Revision of IEEE Std 7-4.3.2-1993) IEEE standard criteria for digital computers in safety systems of .pdf678. IEEE Std 716-1989 IEEE standard C_ATLAS Test Language.pdf679. IEEE Std 716-1995 1.0 Scope and Purpose.pdf680. IEEE Std 730-1998 IEEE standard for software quality assurance plans.pdf

681. IEEE Std 730-1998 Software quality assurance plans.pdf682. IEEE Std 730-2002 (Revision of IEEE Std 730-1998) IEEE Standard for Software Quality Assurance Plans.pdf683. IEEE Std 730-2002 Software quality assurance plansd 730-1998.pdf684. IEEE Std 730.1-1989 IEEE standard for software quality assurance plans.pdf685. IEEE Std 730.1-1995 IEEE guide for software quality assurance planning.pdf686. IEEE Std 738-1993 Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors.pdf687. IEEE Std 739-1984 IEEE recommended practice for energy conservation and cost-effective planning in industrial faciliti.pdf.pdf688. IEEE Std 739-1995 [The Bronze Book] IEEE Recommended Practice For Energy Management In Industrial And Commercial Facilities..pdf689. IEEE Std 741-1990 IEEE Standard criteria for the protection of Class 1E power systems and equipment in nuclear power generat.pdf690. IEEE Std 741-1997 IEEE standard criteria for the protection of class 1E power systems and equipment in nuclear power generat.pdf691. IEEE Std 743-1984 IEEE standard methods and equipment for measuring the transmission characteristics of analog voice frequen.pdf692. IEEE Std 743-1995 IEEE standard equipment requirements and measurement techniques for analog transmission parameters for tel.pdf693. IEEE Std 755 IEEE trial-use standard for extending high-level language implementations for microprocessors.pdf694. IEEE Std 765-1995 Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations.pdf695. IEEE Std 765-2002 (Revision of IEEE Std 765-1995) 765 IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Gener.pdf696. IEEE Std 765-2002 Preferred Power Supply (PPS) for Nuclear Power Generating Stations 核电站首选电源.pdf697. IEEE Std 765-2002 Preferred Power Supply (PPS) for Nuclear Power Generating Stations.pdf698. IEEE Std 775-1993 IEEE Guide for Designing Multistress Aging Tests of Electrical Insulation in a Radiation Environment.pdf699. IEEE Std 776-1987 IEEE guide for inductive coordination of electric supply and communication lines.pdf700. IEEE Std 776-1992 IEEE recommended practice for inductive coordination of electric supply and communication lines.pdf701. IEEE Std 789-1988 IEEE standard performance requirements for communications and control cables for application in high volta.pdf702. IEEE Std 792 IEEE trial-use recommended practice for the evaluation of the impulse voltage capability of insulation systems .pdf703. IEEE Std 802-1990 IEEE Standards for local and metropolitan area networks overview and architecture.pdf704. IEEE Std 802-1990 Local and Metropolitan Area NetworksOverview and Architecture 地方与城市区域网络总则与构架.pdf705. IEEE Std 802-2001 (Revision of IEEE Std 802-1990 IEEE standard for loca and metropolitan area networks overview and architecture Amendment 2 registration of object identifiers.pdf706. IEEE Std 802-2001 (Revision of IEEE Std 802-1990) IEEE standard for local and metropolitan area networks- overview and archi.pdf707. IEEE Std 802.10-1992 IEEE standards for Local and Metropolitan Area Networks Interoperable LANMAN security (SILS) Currently contains Secure Data Exchange (SDE) (clause 2).pdf 708. IEEE Std 802.10-1998 IEEE standards for local and metropolitan area networks Standard for Interoperable LANMAN Security (SILS).pdf709. IEEE Std 802.10-1998 IEEE standards for local and metropolitan area networks- Standard for Interoperable LAN_MAN Security (S.pdf710. IEEE Std 802.10a-1999 IEEE standards for local and metropolitan area networks- supplement to Standard for Interoperable LAN_.pdf711. IEEE Std 802.10a-1999 Local and Metropolitan Area Networks Interoperable LANMAN Security.pdf712. IEEE Std 802.10c-1998 IEEE standards for local and metropolitan area networks- supplement to Standard for Interoperable LAN_.pdf713. IEEE Std 802.10e-1993 and IEEE std 802.10f-1993 Secure Data Exchange (SDE) Sublayer Management and Recommended Practice for .pdf714. IEEE Std 802.11a-1999 Supplement to IEEE standard for information technology telecommunications and information exchange bet.pdf715. IEEE Std 802.11e-2005 (Amendment to IEEE Std 802.11, 1999 Edition (Reaff 2003) IEEE Standard for Information technology - Te.pdf716. IEEE Std 802.11F-2003 IEEE trial-use recommended practice for multi-vendor access point interoperability via an inter-access.pdf717. IEEE Std 802.11h-2003 (Amendment to IEEE Std 802.11, 1999 Edn. (Reaff 2003)) IEEE Std. 802.11h - 2003.pdf718. IEEE Std 802.11j-2004 IEEE Standard for Information technology- Telecommunications and information exchange between systems-.pdf719. IEEE Std 802.12d-1997 (Supplement to IEEE Std 802.12-1995) IEEE standards for Local and Metropolitan Area Networks- suppleme.pdf720. IEEE Std 802.15.3-2003 IEEE standard for information technology - telecommunications and information exchange between system.pdf721. IEEE Std 802.15.4-2003 IEEE standard for information technology - telecommunications and information exchange between system.pdf722. IEEE Std 802.16-2004 (Revision of IEEE Std 802.16-2001) IEEE Standard for Local and Metropolitan Area Networks Part 16- Air .pdf723. IEEE Std 802.16.2-2001 IEEE recommended practice for local and Metropolitan area networks coexistence of fixed broadband wir.pdf724. IEEE Std 802.16_Conformance01-2003 IEEE standard for conformance to ieee 802.16 part 1- protocol implementation conformance .pdf725. IEEE Std 802.16_Conformance03-2004 (Conformance to IEEE Std 802.16-2001 as amended by... IEEE standard for conformance to IE.pdf726. IEEE Std 802.16a-2003 (Amendment to IEEE Std 802.16-2001) IEEE Standard for Local and metropolitan area networks --- Part 16.pdf727. IEEE Std 802.16c-2002 (Amendment to IEEE Std 802.16-2001) IEEE Standard for Local and metropolitan area networks - Part 16- .pdf728. IEEE Std 802.16e-2005 and IEEE Std 802.16-2004_Cor 1-2005 (Amendment and Corrigendum ... IEEE Standard for Local and metropo.pdf729. IEEE Std 802.16f-2005 (Amendment to IEEE Std 802.16-2004) IEEE Standard for Local and metropolitan area networks Part 16- Ai.pdf730. IEEE Std 802.17a-2004 (Amendment to IEEE Std 802.1D-2004) IEEE Standard for Local and Metropolitan Area Networks- Media Acce.pdf731. IEEE Std 802.1B-1992 LAN_MAN management. IEEE standards for local and metropolitan area networks-.pdf732. IEEE Std 802.1D-1990 IEEE standards for local and metropolitan area networks- media access control (MAC) bridges.pdf733. IEEE Std 802.1D-2004 (Revision of IEEE Std 802.1D-1998) IEEE Standard for Local and metropolitan area networks Media Access .pdf734. IEEE Std 802.1E-1990 IEEE standards for local and metropolitan area networks- system load protocol.pdf735. IEEE Std 802.1F-1993 Recommended Practice for Multi-Vendor Access Point Interoperability via an Inter-Access Point Protocol.pdf736. IEEE Std 802.1H-1995 IEEE standards for local and metropolitan area networks- recommended practice for Media Access Control .pdf737. IEEE Std 802.1j-1996 (Supplement to IEEE Std 802.1 D-1990) Local and Metropolitan Area Networks - Media Access Control (MAC).pdf738. IEEE Std 802.1k-1993 Discovery and Dynamic Control of Event Forwarding.pdf739. IEEE Std 802.1Q-1998 IEEE standards for local and metropolitan area networks- virtual bridged local area networks.pdf740. IEEE Std 802.1s-2002 (Amendment to IEEE Std 802.1Q, 1998 Edition) IEEE Standards for Local and metropolitan area networks---.pdf741. IEEE Std 802.1u-2001 Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment 1- Technical and.pdf742. IEEE Std 802.1w-2001 IEEE standard for local and metropolitan area networks - common specification. Part 3- media access con.pdf743. IEEE Std 802.1X-2004 (Revision of IEEE Std 802.1X-2001) IEEE Standard for Local and metropolitan area networks Port-Based Ne.pdf744. IEEE Std 802.3, 1998 Edition Information technology - telecommunications and information exchange between systems - local an.pdf745. IEEE Std 802.3, 2000 Edition Part 3- Carrier sense multiple access with collision detect on (CSMA_CD) access method and phys.pdf746. IEEE Std 802.3-2002 (Revision of IEEE Std 802.3, 2000 edn) IEEE Standard For Information Technology-Telecommunications And I.pdf747. IEEE Std 802.3ab-1999 Information technology - telecommunications and information exchange between systems - local and metro.pdf748. IEEE Std 802.3ac-1998 Information technology Telecommunications and information exchange.pdf

749. IEEE Std 802.3ad-2000 Amendment to carrier sense multiple access with collision detection (CSMA_CD) access method and physic.pdf750. IEEE Std 802.3ae-2002 (Amendment to IEEE Std 802.3-2002) IEEE Standard for Information technology- Telecommunications and in.pdf751. IEEE Std 802.3af-2003 (Amendment to IEEE Std 802.3-2002, including IEEE Std 802.3ae-2... IEEE Std. 802.3af - IEEE Standard f.pdf752. IEEE Std 802.3ah-2004 IEEE Standard for Information technology- Telecommunications and information exchange between systems-.pdf753. IEEE Std 802.3aj-2003 (Amendment to IEEE Std 802.3-2002) IEEE standard for information technology - telecommunications and i.pdf754. IEEE Std 802.3ak-2004 (Amendment to IEEE Std 802.3-2002 as amended by IEEE Stds 802.3... IEEE standard for information techn.pdf755. IEEE Std 802.3r-1996 Information technology - telecommunications and information exchange between systems - local and metrop.pdf756. IEEE Std 802.3x-1997 and IEEE Std 802.3y-1997 (Supplement to ISO_IEC 8802-3- 1996; AN... IEEE Standards for Local and Metrop.pdf757. IEEE Std 802.4b-1992 IEEE Standards For Local And Metropolitan Area Networks- Enhancements for Physical Layer Diversity (Red.pdf758. IEEE Std 802.4h-1997 IEEE standards for local and metropolitan area networks- supplement to token-passing bus access method .pdf759. IEEE Std 802.5-1989 IEEE standards for local area networks- token ring access method and physical layer specifications.pdf.pdf760. IEEE Std 802.5c-1991 Recommended practice for dual ring operation with wrapback reconfiguration.pdf761. IEEE Std 802.5j-1993, Information Technology- Part 4- Token Ring access method ...- Fibre optic station attachment.pdf762. IEEE Std 802.5w-2000 Information technology - Telecommunications and informtion exchange between systems - Local and metropo.pdf763. IEEE Std 802.6-1990 IEEE standards for local and metropolitan area networks- distributed queue dual bus (DQDB) subnetwork of.pdf764. IEEE Std 802.6k-1992 IEEE Standards for Local and Metropolitan Area Networks- Supplement to Media Access Control (MAC) Bridg.pdf765. IEEE Std 802.9-1994 IEEE standards for local and metropolitan area networks- integrated services (IS) LAN interface at the m.pdf766. IEEE Std 802.9a-1995 IEEE standards for local and metropolitan area networks- supplement to Integrated Services (IS) LAN int.pdf767. IEEE Std 802.9c-1995 Annex B (normative) Managed Object Conformance Statement (MOCS) proforma_sup 3_.pdf768. IEEE Std 802.9d-1995 Local and metropolitan area networks.pdf769. IEEE Std 802a-2003 IEEE standard for local and metropolitan area networks- overview and architecture amendment 1- ethertypes.pdf770. IEEE Std 802b-2004 (Amendment to IEEE Std 802-2001, as amended by IEEE Std 802a-2003) IEEE Std 802b - 2004 IEEE Standard for.pdf771. IEEE Std 803.1-1992 Recommended Practice for Unique Identification in Power Plants and Related Facilities.pdf772. IEEE Std 804-1983 IEEE recommended practice for implementation of unique identification in power plants and related faciliti.pdf773. IEEE Std 805-1984 IEEE Recommended Practice For System Identification In Nuclear Power Plants And Related Facilities.pdf774. IEEE Std 82-1994 Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors.pdf775. IEEE Std 82-2002 Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors.pdf776. IEEE Std 823-1989 IEEE standard methodologies for specifying voicegrade channel transmission parameters and evaluating conne.pdf777. IEEE Std 824-1985 IEEE standard for series capacitors in power systems.pdf778. IEEE Std 824-1994 IEEE standard for series capacitors in power systems..pdf779. IEEE Std 824-1994 Standard for Series Capacitors in Power Systems.pdf780. IEEE Std 824-2004 (Revision of IEEE Std 824-1994) IEEE Std 825 - 2004 IEEE Standard for Series Capacitor Banks in Power Syst.pdf781. IEEE Std 828-1998 Standard for Software Configuration Management Plans IEEE Computer Society Document.pdf782. IEEE Std 829-1983 IEEE Standard For Software Test Documentation.pdf783. IEEE Std 833-1988 Recommended Practice Protection of Electric Equipment in Nuclear Stations.pdf784. IEEE Std 835-1994 IEEE Std 835-1994 - IEEE Standard Power Cable Ampacity Tables.pdf785. IEEE Std 836-1991 IEEE recommended practice for precision centrifuge testing of linear accelerometers.pdf786. IEEE Std 836-2001 IEEE recommended practice for precision centrifuge testing of linear accelerometers.pdf787. IEEE Std 837-1989 IEEE standard for qualifying permanent connections used in substation grounding.pdf788. IEEE Std 837-1989 Standard for Qualifying Permanent Connections Used in Substation Grounding.pdf789. IEEE Std 837-2002 IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding.pdf790. IEEE Std 841-1994 IEEE standard for petroleum and chemical industry - severe duty totally enclosed fan-cooled (TEFC).pdf791. IEEE Std 841-2001 Petroleum and Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled.pdf792. IEEE Std 844-1991 IEEE recommended practice for electrical impedance, induction, and skin effect heating of pipelines and ve.pdf793. IEEE Std 845-1999 Guide for the Evaluation of Human-System Performance.pdf794. IEEE Std 848-1996 IEEE Standard Procedure for the Determination of the Ampacity Derating of Fire-Protected Cables.pdf795. IEEE Std 848-1996 Standard Procedure for the Determination of the Ampacity Derating of Fire-Protected.pdf796. IEEE Std 855-1990 IEEE standard for microprocessor operating system interfaces (MOSI) .pdf797. IEEE Std 857-1996 Recommended Practice for Test Procedures for High-Voltage Direct-Current Thyristor Valves.pdf798. IEEE Std 859-1987 IEEE standard terms for reporting and analyzing outage occurrences and outage states of electrical transmi.pdf799. IEEE Std 896.10-1997 IEEE standard for Futurebus+(R) spaceborne systems - profile S.pdf800. IEEE Std 896.2-1991 IEEE standard for futurebus+ - physical layer and profile specification.pdf801. IEEE Std 896.2a-1994 IEEE standard for Futurebus+ - physical layer and profile specification- errata, corrections, and.pdf.pdf802. IEEE Std 896.4-1993 IEEE standard for conformance test requirements for Futurebus+.pdf803. IEEE Std 896.5-1993 IEEE standard for Futurebus+, profile M (military)..pdf804. IEEE Std 896.5a-1994 IEEE standard for Futurebus+, profile M (military)- errata, corrections, and clarifications.pdf805. IEEE Std 91a-1991 & IEEE Std 91-1984 Graphic symbols for logic functions (includes IEEE Std 91a-1991 supplement, and IEEE ST.pdf806. IEEE Std 91a-1991 IEEE Standard Graphic Symbols for Logic Functions (Including and incorporating IEEE Std 91a-1991, Supplement to IEEE Standard Graphic Symbols for Logic Functions).pdf807. IEEE Std 91a-1991, Std 91-1984 Graphic symbols for logic functions.pdf808. IEEE Std 929-2000 IEEE Recommended Practice for Utility Interface of Photovoltaic (PV) Systems.pdf809. IEEE Std 930-2004 (Revision of IEEE Std 930-1987) IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown.pdf810. IEEE Std 933-1999 Guide for the Definition of Reliability Program Plans for Nuclear Power generating Stations.pdf811. IEEE Std 933-1999 IEEE guide for the definition of reliability program plans for nuclear power generating stations.pdf812. IEEE Std 937-2000 IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Sy.pdf813. IEEE Std 937-2000 Recommended Practice for Installation and Maintenance of Lead-Acid Batteries.pdf814. IEEE Std 946-1985 IEEE Recommended Practice For The Design Of Safety-related Dc Auxiliary Power Systems For Nuclear Power Ge.pdf815. IEEE Std 946-1992 Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations.pdf816. IEEE Std 949 IEEE trial-use standard for media-independent information transfer.pdf

817. IEEE Std 95-2002 (Revision of IEEE Std 95-1977) IEEE recommended practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage.pdf818. IEEE Std 951-1988 IEEE guide to the assembly and erection of metal transmission structures.pdf819. IEEE Std 952-1997 IEEE standard specification format guide and test procedure for single-axis interferometric fiber optic gy.pdf820. IEEE Std 957-1987 IEEE guide for cleaning insulators.pdf821. IEEE Std 957-1995 IEEE guide for cleaning insulators.pdf822. IEEE Std 958-2003 IEEE Guide for the Application of AC Adjustable-Speed Drives on 2400 to 13 800 V Auxiliary Systems in Elec.pdf823. IEEE Std 959-1988 IEEE standard specifications for an I_O expansion bus- SBX bus.pdf824. IEEE Std 960-1989, Std 1177-1989 IEEE standard FASTBUS modular high-speed data acquisition and control system and IEEE FASTBUS standard routines.pdf825. IEEE Std 961-1987 IEEE standard for an 8-bit microcomputer bus system- STD bus.pdf826. IEEE Std 973-1990 IEEE standard definitions of switching system performance in a telecommunications environment.pdf827. IEEE Std 979-1994 Guide for Substation Fire Protection.pdf828. IEEE Std 98-1972 IEEE Standard For The Preparation Of Test Procedures For The Thermal Evaluation Of Solid Electrical Insulat.pdf829. IEEE Std 98-1984 (Revision of IEEE Std 98-1972) IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluat.pdf830. IEEE Std 98-1984 (Revision of IEEE Std 98-1972).pdf831. IEEE Std 98-2002 Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials.pdf832. IEEE Std 980-1994 IEEE guide for containment and control of oil spills in substations .pdf833. IEEE Std 982.2-1988 IEEE guide for the use of IEEE standard dictionary of measures to produce reliable software.pdf834. IEEE Std 987-2001 Guide for Application of Composite Insulators.pdf835. IEEE Std 99-1980 IEEE recommended practice for the preparation of test procedures for the thermal evaluation of insulation s.pdf836. IEEE Std 99-1980 Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation.pdf837. IEEE Std 990-1987 IEEE recommended practice for Ada as a program design language.pdf838. IEEE Std 993-1990 IEEE trial-use standard for test equipment description language (TEDL).pdf839. IEEE Std 993-1997 IEEE standard for Test Equipment Description Language (TEDL).pdf840. IEEE Std C 37.20.6-1997 Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices.pdf841. IEEE Std C 57.104-1991 Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers.pdf842. IEEE Std C 57.106-2002 Guide for Acceptance and Maintenance of Insulating Oil in Equipment.pdf843. IEEE Std C 57.109-1993 Guide for Liquid-Immersed Transformer Through-Fault-Current Duration.pdf844. IEEE Std C 57.110-1998 Recommended Practice for Establishing Transformer Capability .pdf845. IEEE Std C 57.111-1989 Guide for Acceptance of Silicone Insulating Fluid and Maintenance.pdf846. IEEE Std C 57.113-1991 Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers .pdf847. IEEE Std C 57.116-1989 Guide for Transformers Directly Connected to Generators.pdf848. IEEE Std C 57.12.01-1998 Standard Requirements for Dry-Type Distribution and Power Transformers .pdf849. IEEE Std C 57.12.23-2002 Transformers with Separable Insulated High-Voltage Connectors.pdf850. IEEE Std C 57.12.28-1999 Pad-Mounted Equipment Enclosure Integrity.pdf851. IEEE Std C 57.12.31-2002 Pole-Mounted Equipment Enclosure Integrity.pdf852. IEEE Std C 57.12.32-2002 Submersible Equipment Enclosure Integrity.pdf853. IEEE Std C 57.12.35-1996 Standard for Bar Coding for Distribution Transformers.pdf854. IEEE Std C 57.12.44-2000 Standard Requirements for Secondary Network Protectors.pdf855. IEEE Std C 57.12.58-1991 Guide for Conducting Voltage Analysis of a Dry-Type Transformer Coil .pdf856. IEEE Std C 57.12.59-2001 Guide for Dry-Type Transformer Through-Fault Current Duration.pdf857. IEEE Std C 57.12.60-1998 Guide Test Procedures for Thermal Evaluation of Insulation Systems.pdf858. IEEE Std C 57.12.70-2000 Standard Terminal Markings for Distribution and Power Transformers.pdf859. IEEE Std C 57.12.80-2002 Standard Terminology for Power and Distribution Transformers.pdf860. IEEE Std C 57.12.91-2001 Standard Test Code for Dry-Type Power Transformers.pdf861. IEEE Std C 57.13-1993 Standard Requirements for Instrument Transformers.pdf862. IEEE Std C 57.15-1999 Standard Requirements Terminology for Step-Voltage Regulators.pdf863. IEEE Std C 57.18.10-1998 Standard Requirements for Semiconductor Power Rectifier Transformers.pdf864. IEEE Std C 57.19.00-1991 General Requirements and Test for Outdoor Power Apparatus Bushings.pdf865. IEEE Std C 57.19.01-2000 Standard Performance Characteristics for Outdoor Apparatus Bushings.pdf866. IEEE Std C 57.19.03-1997 Standard Requirements for Bushings for DC Applications.pdf867. IEEE Std C 57.19.100-1995 Guide for Application of Power Apparatus Bushings .pdf868. IEEE Std C 57.21-1990 Standard Requirements Shunt Reactors Rated Over 500 kVA.pdf869. IEEE Std C 57.91-1995 Guide for Loading Mineral-Oil-Immersed Transformers.pdf870. IEEE Std C 57.93-1995 Guide for Installation of Liquid-Immersed Power Transformers.pdf871. IEEE Std C 57.98-1993 Guide for Transformer Impulse Tests Corrections.pdf872. IEEE Std C135.1-1999 IEEE standard for zinc-coated steel bolts and nuts for overhead line construction.pdf873. IEEE Std C135.1-1999 Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction.pdf874. IEEE Std C135.2-1999 IEEE standard for threaded zinc-coated ferrous strand-eye anchor rods and nuts for overhead line constr.pdf875. IEEE Std C135.2-1999 Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line.pdf876. IEEE Std C135.20-1998 IEEE standard for zinc-coated ferrous insulator clevises for overhead line construction.pdf877. IEEE Std C135.63-1998 IEEE standard for shoulder live line extension links for overhead line construction.pdf878. IEEE Std C135.63-1998 Shoulder Live Line Extension Links for Overhead Line Con.pdf879. IEEE Std C37.010-1999 Application Guide for AC High-Voltage Circuit Breakers .pdf880. IEEE Std C37.010-1999 IEEE application guide for AC high-voltage circuit breakers rated on a symmetrical current basis.pdf.pdf881. IEEE Std C37.011-1994 Application Guide for Transient Recovery Voltage .pdf882. IEEE Std C37.011-2005 (Revision of IEEE Std C37.011-1994) IEEE Application Guide for Transient Recovery Voltage for AC High-.pdf883. IEEE Std C37.012-2005 (Revision of IEEE Std C37.012-1979) IEEE Application Guide for Capacitance Current Switching for AC Hi.pdf884. IEEE Std C37.013-1989 IEEE standard for AC high-voltage generator circuit breakers rated on a symmetrical current basis.pdf.pdf

885. IEEE Std C37.013-1997 IEEE standard for AC high-voltage generator circuit breakers rated on a symmetrical current basis.pdf.pdf886. IEEE Std C37.015-1993 IEEE application guide for shunt reactor switching..pdf887. IEEE Std C37.04-1999 IEEE standard rating structure for AC high-voltage circuit breakers .pdf888. IEEE Std C37.04a-2001 Techniques for high-voltage testing.pdf889. IEEE Std C37.04a-2003 Techniques for high-voltage testing.pdf890. IEEE Std C37.081-1981 Guide for Synthetic Fault Testing .pdf891. IEEE Std C37.081a-1997 Supplement to IEEE guide for synthetic fault testing of AC high-voltage circuit breakers rated on a s.pdf892. IEEE Std C37.083-1999 Guide for Synthetic Capacitive Current Switching Tests .pdf893. IEEE Std C37.083-1999 IEEE guide for synthetic capacitive current switching tests of AC high-voltage circuit breakers.pdf.pdf894. IEEE Std C37.09-1999 IEEE standard test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis.pdf895. IEEE Std C37.09-1999 Standard Test Procedure for AC High-Voltage Circuit Breakers .pdf896. IEEE Std C37.09a-2005 (Amendment to IEEE Std C37.09-1999) IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers .pdf897. IEEE Std C37.10-1995 IEEE guide for diagnostics and failure investigation of power circuit breakers.pdf898. IEEE Std C37.100d-1991 (Supplement to C37.100-1981) IEEE Standard Definitions For Power Switchgear.pdf899. IEEE Std C37.101-1993 Guide for Generator Ground Protection.pdf900. IEEE Std C37.102-1987 IEEE guide for AC generator protection.pdf901. IEEE Std C37.102-1995 Guide for AC Generator Protection.pdf902. IEEE Std C37.103-1990 IEEE guide for differential and polarizing relay circuit testing .pdf903. IEEE Std C37.104-2002 Guide for Automatic Reclosing of Line Circuit Breakers .pdf904. IEEE Std C37.105-1987 IEEE standard for qualifying class 1E protective relays and auxiliaries for nuclear power generating s.pdf905. IEEE Std C37.108-2002 Guide for the Protection of Network Transformers.pdf906. IEEE Std C37.110-1996 IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes.pdf907. IEEE Std C37.111-1999 Standard Common Format for Transient Data Exchange for Power Systems.pdf908. IEEE Std C37.112-1996 Standard Inverse-Time Characteristic Equations for Overcurrent Relays.pdf909. IEEE Std C37.113-1999 Guide for Protective Relay Applications to Transmission Lines.pdf910. IEEE Std C37.119-2005 IEEE Std C37.119 - 2005 IEEE Guide for Breaker Failure Protection of Power Circuit Breakers.pdf911. IEEE Std C37.122-1983 IEEE standard for gas-insulated substations.pdf912. IEEE Std C37.122-1993 IEEE standard for gas-insulated substations..pdf913. IEEE Std C37.123-1996 Guide to Specifications for Gas-Insulated Electric Power Equipment.pdf914. IEEE Std C37.13-1990 IEEE Standard for low-voltage AC power circuit breakers used in enclosures.pdf915. IEEE Std C37.14-2002 Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures.pdf916. IEEE Std C37.2-1987 IEEE standard electrical power system device function numbers.pdf917. IEEE Std C37.2-1991 IEEE standard electrical power system device function numbers.pdf918. IEEE Std C37.2-1996 IEEE standard electrical power system device function numbers and contact designations.pdf919. IEEE Std C37.20.1-1993 IEEE standard for metal-enclosed low-voltage power circuit breaker switchgear.pdf920. IEEE Std C37.20.1-2002 Standard for Metal-Enclosed Low-Voltage Power Breaker Switchgear.pdf921. IEEE Std C37.20.2-1993 IEEE standard for metal-clad and station type cubicle switchgear.pdf922. IEEE Std C37.20.2b-1994 (Supplement to IEEE Std C37.20.2-1993) Supplement To IEEE Standard For Metal-clad And Station-type C.pdf923. IEEE Std C37.20.2b-1994 Standard for Metal-Clad Switchgear.pdf924. IEEE Std C37.20.3-2001 - IEEE Standard for metal-enclosed interrupter switchgear IEEE standard for metal-enclosed interrupte.pdf925. IEEE Std C37.20.3-2001 Metal-Enclosed Interrupter Switchgear.pdf926. IEEE Std C37.20.4-1996 IEEE Trial-Use Standard for Indoor AC Switches (1 kV-38 kV) for Use in Metal-Enclosed Switchgear.pdf.pdf927. IEEE Std C37.20.4-2001 Standard for Indoor AC Switches (1 kV - 38 kV) for Use Switchgear.pdf928. IEEE Std C37.20.6-1997 IEEE standard for 4.76 kV to 38 kV rated grounding and testing devices used in enclosures.pdf929. IEEE Std C37.20.6-1997 Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices.pdf930. IEEE Std C37.20.7-2001 Guide for Testing Medium-Voltage Metal-Enclosed Switchgear .pdf931. IEEE Std C37.21-2005 (Revision of IEEE Std C37.21-1985) IEEE Standard for Control Switchboards.pdf932. IEEE Std C37.23-1987 Guide for Metal-Enclosed Bus and Calculating Losses .pdf933. IEEE Std C37.24-1986 Guide for Evaluating the Effect of Solar Radiation .pdf934. IEEE Std C37.26-1972 Standard Guide for Methods of Power-Factor Measurement .pdf935. IEEE Std C37.26-2003 (Revision of IEEE Std C37.26-1972) IEEE guide for methods of power factor measurement for low-voltage i.pdf936. IEEE Std C37.30-1997 IEEE standard requirements for high-voltage switches.pdf937. IEEE Std C37.30-1997 Standard Requirements for High-Voltage Switches.pdf938. IEEE Std C37.30h-1978 IEEE Standard Definitions And Requirements For High-voltage Air Switches, Insulators, And Bus Supports.pdf939. IEEE Std C37.34-1994 IEEE standard test code for high-voltage air switches.pdf940. IEEE Std C37.34e-1979 IEEE standard test code for high-voltage air switches. (Supplement- switching-impulse testing of extra.pdf941. IEEE Std C37.35-1995 IEEE guide for the application, installation, operation, and maintenance of high-voltage air disconnect.pdf942. IEEE Std C37.37-1996 Loading Guide for AC High-Voltage Air Switches .pdf943. IEEE Std C37.37a-1992 (Supplement to ANSI_IEEE C37.37-1979) IEEE Standard Loading Guide For Ac High-voltage Air Switches Und.pdf944. IEEE Std C37.40-1993 IEEE standard service conditions and definitions for high-voltage fuses, distibution enclosed single.pd.pdf945. IEEE Std C37.40-1993 Standard Service Conditions and Definitions.pdf946. IEEE Std C37.40-2003 (Revision of IEEE Std C37.40-1993) IEEE Standard Service Conditions and Definitions for High-Voltage Fu.pdf947. IEEE Std C37.40b-1996 IEEE standard service conditions and definitions for external fuses for shunt capacitors. Supplement t.pdf948. IEEE Std C37.41-1994 IEEE standard design for high-voltage fuses, distribution enclosed single-pole air switches, fuse disco.pdf949. IEEE Std C37.41-2000 IEEE standard design tests for high-voltage fuses, distribution enclosed single-pole air switches, fuse.pdf950. IEEE Std C37.41-2000 Standard Design Test for High-Voltage Fuses Distribution.pdf951. IEEE Std C37.41c-1991 IEEE test standard for expulsion fuses in enclosures - Supplement to IEEE standard design tests for hi.pdf952. IEEE Std C37.41e-1996 IEEE Standard Design Tests For External Fuses For Shunt Capacitors.pdf

953. IEEE Std C37.48-1997 Guide for Application Operation and Maintenance .pdf954. IEEE Std C37.48-1997 IEEE Guide For The Application, Operation, And Maintenance Of High-voltage Fuses, Distribution Enclosed.pdf955. IEEE Std C37.48-2005 Guide for Application Operation and Maintenance .pdf956. IEEE Std C37.48.1-2002 Guide for the Operation Classification Application.pdf957. IEEE Std C37.48.1-2002 IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses.pdf958. IEEE Std C37.48c-1991 IEEE guide for application of expulsion fuses in enclosures Supplement to IEEE guide for application, .pdf959. IEEE Std C37.59-1 996 IEEE standard requirements for conversion of power switchgear equipment.pdf960. IEEE Std C37.59-1991 IEEE standard requirements for conversion of power switchgear equipment.pdf961. IEEE Std C37.59-2002 Standard Requirements for Conversion of Power Switchgear Equipment.pdf962. IEEE Std C37.63-2005 Overhead Pad-Mounted Dry-Vault and Submersible Line Sectionalizers).pdf963. IEEE Std C37.66-2005 (Revision of ANSI C37.66-1969) IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV t.pdf964. IEEE Std C37.71-2001 IEEE standard for three-phase, manually operated subsurface and vault load-interrupting switches for al.pdf965. IEEE Std C37.73-1998 IEEE standard requirements for pad-mounted fused switchgear.pdf966. IEEE Std C37.81-1989 IEEE guide for seismic qualification of class 1E metal-enclosed power switchgear assemblies.pdf967. IEEE Std C37.90.2-1995 IEEE standard for withstand capability of relay systems to radiated electromagnetic interference from.pdf968. IEEE Std C37.90.2-2004 Standard for Relays and Relay Systems Electric Power Apparatus.pdf969. IEEE Std C37.90.3-2001 IEEE standard electrostatic discharge tests for protective relays.pdf970. IEEE Std C37.93-2004 (Revision of IEEE Std C37.93-1987) IEEE Guide for Power System Protective Relay Applications of Audio T.pdf971. IEEE Std C37.93-2004 Guide for Power System Protective Relay Applications of Audio Tones .pdf972. IEEE Std C37.94-2002 IEEE standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and mul.pdf973. IEEE Std C37.95-1989 IEEE guide for protective relaying of utility - consumer interconnections.pdf974. IEEE Std C37.95-2002 (Revision of IEEE Std C37.95-1989) IEEE guide for protective relaying of utility-consumer interconnecti.pdf975. IEEE Std C37.95-2002 Guide for Protective Relaying of Utility - Consumer Interconnections.pdf976. IEEE Std C37.96-2000 IEEE Guide for AC Motor Protection.pdf977. IEEE Std C37.99-1990 IEEE guide for the protection of shunt capacitor banks.pdf978. IEEE Std C50.13-2005 IEEE Std C50.13 - 2005 IEEE standard for cylindrical-rotor 50 Hz and 60 Hz synchronous generators rated.pdf979. IEEE Std C57.100-1999 IEEE standard test procedure for thermal evaluation of liquid-immersed distribution and power transfor.pdf980. IEEE Std C57.111-1989 IEEE guide for acceptance of silicone insulating fluid and its maintenance in transformers.pdf981. IEEE Std C57.114-1990 IEEE seismic guide for power transformers and reactors.pdf982. IEEE Std C57.115-1991 IEEE guide for loading mineral-oil-immersed power transformers rated in excess of 100 MVA (65 °C wind.pdf983. IEEE Std C57.12.01-1998 IEEE standard general requirements for dry-type distribution and power transformers including those .pdf984. IEEE Std C57.12.23-2002 (Revision of IEEE Std C57.12.23-1992) IEEE Standard for Underground Type, Self-Cooled, Single-Phase,.pdf985. IEEE Std C57.12.28-2005 IEEE Std. C57.12.28 - 2005 IEEE Standard for Pad-Mounted Equipment - Enclosure Integrity.pdf986. IEEE Std C57.12.31-2002 IEEE standard for pole mounted equipment - enclosure integrity.pdf987. IEEE Std C57.12.32-2002 IEEE standard for submersible equipment - enclosure integrity.pdf988. IEEE Std C57.12.34-2004 IEEE standard requirements for pad-mounted, compartmental-type, self-cooled, three-phase distributio.pdf989. IEEE Std C57.12.59-2001 IEEE guide for dry-type transformer through-fault current duration.pdf990. IEEE Std C57.12.60-1998 IEEE guide for test procedures for thermal evaluation of insulation systems for solid-cast and resin.pdf991. IEEE Std C57.12.90-1993 Liquid-Immersed Distribution, Power, and Regulating Transformers and Guide for Short-Circuit Testing.pdf992. IEEE Std C57.13.2-2005 IEEE Std. C57.13.2 - 2005 IEEE Standard Conformance Test Procedure for Instrument Transformers.pdf.pdf993. IEEE Std C57.131-1995 IEEE standard requirements for load tap changers.pdf994. IEEE Std C57.134-2000 IEEE guide for determination of hottest-spot temperature in dry-type transformers.pdf995. IEEE Std C57.135-2001 C57.135 IEEE Guide for the Application, Specification, and Testing of Phase-Shifting transformers.pdf.pdf996. IEEE Std C57.136-2000 IEEE guide for sound level abatement and etermination for liquid-immersed power transformers and shunt.pdf997. IEEE Std C57.144-2004 IEEE Std C57.144 - 2004 - IEEE Guide for Metric Conversion of Transformer Standards.pdf998. IEEE Std C57.146-2005 IEEE Std C57.146 2005.pdf999. IEEE Std C57.15-1999 IEEE standard requirements, terminology, and test code for step-voltage regulators.pdf1000. IEEE Std C57.18-10-1998 IEEE standard practices and requirements for semiconductor power rectifier transformers.pdf1001. IEEE Std C57.19.01-1991 IEEE standard performance characteristics and dimensions for outdoor apparatus bushings.pdf1002. IEEE Std C57.19.100-1995 IEEE guide for application of power apparatus bushings.pdf1003. IEEE Std C57.19.101 IEEE trial-use guide for loading power apparatus bushings.pdf1004. IEEE Std C57.21-1990 IEEE standard requirements, terminology, and test code for shunt reactors rated over 500 kVA.pdf1005. IEEE Std C57.91-1995 IEEE guide for loading mineral-oil-immersed transformers.pdf1006. IEEE Std C57.91-1995_Cor 1-2002 C57.91-1995_Cor 1-2002 IEEE guide for loading mineral-oil- immersed transformers corrigendum.pdf1007. IEEE Std C57.93-1995 IEEE Guide for Installation of Liquid-immersed Power Transformers.pdf1008. IEEE Std C57.96-1999 IEEE guide for loading dry-type distribution and power transformers .pdf1009. IEEE Std C57.98-1993 IEEE guide for transformer impulse tests.pdf1010. IEEE Std C62.1-1989 IEEE standard for gapped silicon-carbide surge arresters for AC power circuits.pdf1011. IEEE Std C62.11-1993 IEEE standard for metal-oxide surge arresters for alternating current power circuits.pdf1012. IEEE Std C62.11-1999 IEEE standard for metal-oxide surge arresters for AC power circuits (- 1kV).pdf1013. IEEE Std C62.11-2005 (Revision of IEEE Std C62.11-1999) IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits .pdf1014. IEEE Std C62.21-2003 IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V an.pdf1015. IEEE Std C62.22-1991 IEEE guide for the application of metal-oxide surge arresters for alternating-current systems.pdf1016. IEEE Std C62.22-1997 IEEE guide for the application of metal-oxide surge arresters for alternating-current systems.pdf1017. IEEE Std C62.23-1995 IEEE application guide for surge protection of electric generating plants.pdf1018. IEEE Std C62.32-2004 (Revision of IEEE Std C62.32-1981) IEEE Standard Test Methods for Low-Voltage Air Gap Surge-Protective .pdf1019. IEEE Std C62.33-1982 IEEE standard test specifications for varistor surge-protective devices.pdf1020. IEEE Std C62.35-1987 IEEE standard test specifications for avalanche junction semiconductor surge protective devices.pdf

1021. IEEE Std C62.36-1991 IEEE standard test methods for surge protectors used in low-voltage data, communications, and signaling.pdf1022. IEEE Std C62.36-2000 IEEE standard test methods for surge protectors used in low-voltage data, communications, and signaling.pdf1023. IEEE Std C62.37-1996 IEEE standard test specification for thyristor diode surge protective devices.pdf1024. IEEE Std C62.37.1-2000 IEEE guide for the application of thyristor surge protective devices.pdf1025. IEEE Std C62.38-1994 IEEE guide on electrostatic discharge (ESD)- ESD withstand capability evaluation methods (for electroni.pdf1026. IEEE Std C62.41-1991 IEEE recommended practice on surge voltages in low-voltage AC power circuits.pdf1027. IEEE Std C62.41.1-2002 IEEE Std. C62.41.1 - 2002.pdf1028. IEEE Std C62.41.2-2002 IEEE recommended practice on characterization of surges in low-voltage (1000 V and less) AC power cir.pdf1029. IEEE Std C62.43-2004 (Revision of IEEE Std C62.43-1999) IEEE guide for the application of surge protectors used in low-volta.pdf1030. IEEE Std C62.45-1992 IEEE Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power Circuits.pdf1031. IEEE Std C62.45-2002 (Revision of IEEE Std C62.45-1992) IEEE Std. C62.45 - 2002.pdf1032. IEEE Std C62.47-1992 IEEE guide on electrostatic discharge (ESD)- characterization of the ESD environment.pdf1033. IEEE Std C62.48-1995 IEEE guide on interactions between power system disturbances and surge-protective devices.pdf1034. IEEE Std C62.48-2005 (Revision of IEEE Std C62.48-1995) IEEE Guide on Interactions Between Power System Disturbances and Sur.pdf1035. IEEE Std C62.62-2000 IEEE standard test specifications for surge-protective devices for low-voltage AC power circuits.pdf.pdf1036. IEEE Std C62.64-1997 IEEE standard specifications for surge protectors used in low-voltage data, communications, and signali.pdf1037. IEEE Std C62.92.1-2000 IEEE guide for the application of neutral grounding in electrical utility systems - Part 1- introduct.pdf1038. IEEE Std C62.92.3-1993 IEEE guide for the neutral grounding in electrical utility systems, Part III-Generator Auxiliary Sys.pdf1039. IEEE Std C62.92.5-1992 IEEE guide for the application of neutral grounding in electrical utility systems, part V - transmiss.pdf1040. IEEE Std C95.1-1991 IEEE standard for safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 kHz to 300 GHz.pdf1041. IEEE Std C95.1-2005 (Revision of IEEE Std C95.1-1991) IEEE Std C95.1 - 2005 IEEE Standard for Safety Levels with Respect to .pdf1042. IEEE Std C95.2-1999 IEEE standard for radio-frequency energy and current-flow symbols .pdf1043. IEEE Std C95.2-1999 Radio-Frequency Energy and Current-Flow Symbols.pdf1044. IEEE Std C95.3-1991 IEEE recommended practice for the measurement of potentially hazardous electromagnetic fields - RF and m.pdf1045. IEEE Std C95.4-2002 IEEE Recommended Practice for Determining Safe Distances from Radio Frequency Transmitting Antennas When.pdf1046. IEEE Std C95.6-2002 IEEE Standard for Safety Levels with Respect to Human Exposure to Electromagnetic Fields, 0-3 kHz.pdf.pdf1047. IEEE Std No.177 Standard definitions and methods of measurement for piezoelectric vibrators.pdf1048. IEEE Std. 1215 - IEEE Guide for the Application of Separable Insulated Connectors.pdf1049. IEEE_ASTM SI 10-2002 (Revision of IEEE_ASTM SI 10-1997) IEEE_ASTM SI 10 - 2002.pdf1050. IEEE_EIA 12207.2-1997 Industry implementation of International Standard ISO_IEC 12207- 1995. (ISO_IEC 12207 standard for inf.pdf1051. In-System Configuration of Programmable Devices, IEEE Standard on. IEEE Standard for In-System Configuration of Programmable.pdf1052. ISO_IEEE 11073-10101-2004(E) Health informatics - Point-of-care medical device communication - Part 10101- Nomenclature.pdf.pdf1053. ISO_IEEE 11073-10201-2004(E) Health informatics - Point-of-care medical device communication - Part 10201- Domain informatio.pdf1054. ISO_IEEE 11073-20101-2004(E) Health informatics - Point-of-care medical device communication - Part 20101- Application profi.pdf1055. ISO_IEEE 11073-30300-2004(E) Health informatics - Point-of-care medical device communication - Part 30300- Transport profile.pdf