4/10 HP Submersible Sewage Pump, 2 Solids - brm.mx · 4/10 HP Submersible Sewage Pump, 2" Solids SW-40 Series Features Handles liquids and solid waste materials up to 2" diameter

48

4/10 HP Submersible Sewage Pump, 2" SolidsSW-40 Series

Features

Handles liquids and solid waste materials up to 2" diameter.

Cast iron pump housing and cover with protective epoxy coating for corrosion resistance.

Oil-filled motor housing for lifetime lubrication and rapid heat dissipation.

Stainless steel fasteners.

Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces).

Thermal overload protection.

Manual and automatic models.

Automatic operation has a 9 to 14 inch “ON” level and 2 to 6 inch “OFF” level range with piggyback mechanical float switch.

Franklin Electric wastewater pumps are rated continuous duty as long as they are run within the published ratings for these pumps.

Sewage

115 Volt Models Only

GLASS-FILLED NYLONVORTEX IMPELLER

MOTOR DESIGNED FOR MAXIMUM PERFORMANCE

STAINLESS STEEL SCREWS

CARBON AND CERAMICFACE SEAL

LOWER BALLBEARING

UPPER SINTERED SLEEVEBEARING FOR SMOOTH

OPERATION ANDEXTENDED LIFE

CAST IRON COVER,HOUSING AND VOLUTE

WITH PROTECTIVEEPOXY COATING TORESIST CORROSION

OIL-FILLED TODISSIPATE HEATFOR MAXIMUM LIFE

49

SW-40 Series 4/10 HP Submersible Sewage Pump, 2" Solids

Sewage

10.3"

5.3"

2" FNPTDISCHARGE

2" DIA. INTAKE2"

11.5" 6.8"

5.4"

AF - Piggyback Mechanical Float Switch* without plug

Specifications

Cover Epoxy Coated Cast Iron

Motor Housing Epoxy Coated Cast Iron

Impeller Material Nylon

Impeller Type Vortex

Volute Epoxy Coated Cast Iron

Power Cord SJTW

Mechanical Shaft SealNitrile with Carbon and Ceramic Faces

Fasteners Stainless Steel

Shaft Steel

BearingsUpper - Sintered SleeveLower - Ball Bearing

Construction

0

5

15

10

20

0 10 20 30 40 7050 60 80

FLOW - GALLONS/MINUTE

0.0

4.0

2.0

1.0

5.0

6.0

3.0

0 50 100 150 200 250 300

FLOW - LITERS/MINUTE

HEA

D -

MET

ERS

HEA

D -

FEE

T

MODEL NO. ITEM NO. HP VOLTS DISCHARGE SIZE RUNNING AMPS/WATTS

PERFORMANCE (GPM) SHUT-OFF CORD LENGTH

WEIGHT(LBS)5' 10' 15' FEET PSI

SW-40509403 4/10 115 2" FNPT 13/1020 80.0 50.0 16.0 18.0 7.8 15' 36.0509451 4/10 230 2" FNPT 6.5/1020 80.0 50.0 16.0 18.0 7.8 15'* 36.0

SW-40-AF 509501 4/10 115 2" FNPT 13/1020 80.0 50.0 16.0 18.0 7.8 15' 36.0

50

4/10 HP Submersible Sewage Pump, 2" SolidsSWL-40 Series

Features

Powerful, 4/10 HP Permanent Split Capacitor (PSC) motor for high starting and running torque, with low Amp draw to conserve electrical energy.

Recessed, vortex impeller made of tough, engineered composite material to reduce clogging; will pass 2-inch spherical solids.

Upper and lower ball bearings for extended motor life.

Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) to assure maximum protection against pump failure.

Rugged cast iron pump housing with epoxy coating for corrosion resistance.

Diaphragm pressure switch for automatic operation.

Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation.

Stainless steel hardware to protect against corrosion.



Sewage

SWL-40-AD

SWL-40

C US

SWITCHBREATHER

TUBE

OPERATIONAUTOMATIC

PIGGYBACK PLUG

7.6

10.7

10.5

10.7

7.6

14.814.8

SWITCHOFF 5"

SWITCHON 15"

APPROX

APPROX

2" FNPT2" FNPT

51

SWL-40 Series 4/10 HP Submersible Sewage Pump, 2" Solids

Sewage


Impeller Material Engineered Composite

Impeller Type Recessed, Vortex


Power Cord 16/3 SJTW-A

Mechanical Shaft Seal Nitrile with Carbon and Ceramic Faces


Shaft Cold Rolled Steel

Bearings Ball Bearings

Construction

Specifications

0

5

15

10

20

0 10 20 30 40 70 9050 60 10080


0.0

4.0

2.0

1.0

5.0

6.0

3.0

0 100 200 300


HEA

D -

MET

ERS

HEA

D -

FEE

T




SWL-40 509462 4/10 115 2" FNPT 8.9/870 95.0 60.0 22.0 18.0 7.8 20' 52.0

SWL-40-AD509563 4/10 115 2" FNPT 8.9/870 95.0 60.0 22.0 18.0 7.8 20' 53.0509564 4/10 230 2" FNPT 4.5/870 95.0 60.0 22.0 18.0 7.8 20' 55.0

60

1/2 HP Manual Submersible Sewage Pump, 2" SolidsSW-50 Series

Features

Handles liquids and solid waste materials up to 2-inch diameter.

Cast iron pump housing and volute with protective epoxy coating for corrosion and rust resistance.


Stainless steel fasteners.




Sewage

HEAVY DUTY POWER CORD

UPPER BALLBEARING

EPOXY-COATEDCAST IRON COVER

ENGINEERED,HIGH-IMPACT

THERMOPLASTICBASE ALLOWS

¾" SOLIDS

OIL-FILLED TODISSIPATE HEAT

FOR MAXIMUM LIFE

GLASS-FILLEDNYLON VORTEX IMPELLER

LOWER BALLBEARING

CAST IRON HOUSINGWITH PROTECTIVE EPOXY COATING TO RESIST CORROSION

MOTOR DESIGNEDFOR MAXIMUM

PERFORMANCECARBON & CERAMICFACE SEAL

61




SW-50511402 ½ 115 2" FNPT 12/1000 110.0 85.0 45.0 20.0 8.7 15' 44.0511476 ½ 208/230 2" FNPT 6.6/1100 110.0 85.0 45.0 20.0 8.7 15' 44.0

SW-50 Series 1/2 HP Manual Submersible Sewage Pump, 2" Solids

Sewage

12.70

2.00" DIA.INTAKE

2" OR 3"NPTDISCHARGE

11.40

8.25

5.50


Impeller Material Nylon



Power Cord SJTW



Shaft Steel


Construction

Specifications

0

5

15

10

20

0 20 40 60 80 100 120


0.0

4.0

2.0

1.0

5.0

6.0

7.0

3.0

0 100 200 300 400


HEA

D -

MET

ERS

HEA

D -

FEE

T

62

1/2 HP Automatic Submersible Sewage Pump, 2" SolidsSW-50-A Series

Features


Cast iron pump housing with protective epoxy coating for corrosion resistance.


Stainless steel screws, bolts, handle and switch guard.



Integral snap-action float switch - Automatic operation has 11 to 14 inch “ON” level range and 5 to 8 inch “OFF” level range.

Piggyback mechanical float switch - Automatic operation has 15 to 17 inch “ON” level range and 8 to 10 inch “OFF” level range.

PSC type motor with upper and lower ball bearings.



MOTOR DESIGNEDFOR MAXIMUM PERFORMANCE

OIL-FILLED TO DISSIPATEHEAT FOR EXTENDED LIFE

CAST IRON HOUSING WITHPROTECTIVE EPOXY COATINGTO RESIST CORROSION

EPOXY COATED CAST IRON VOLUTE

STAINLESS STEEL LIFTING RING HANDLE

UPPER ANDLOWER BALL

BEARINGS

GLASS-FILLED NYLONVORTEX IMPELLER

STAINLESS STEEL SCREWS

Sewage

63

SW-50-A Series 1/2 HP Automatic Submersible Sewage Pump, 2" Solids

Sewage

2.00

2.00" DIA. INTAKE

5.30

12.70

5.50

10.30

8.25

2" FNPTDISCHARGE

15 FT POWER CORD


Impeller Material Glass-Filled Nylon



Power Cord 16-3 SJTW



Shaft Steel


Construction

Specifications

0

5

15

10

20

25

0 20 40 60 80 100 120


0.0

4.0

2.0

1.0

5.0

6.0

7.0

3.0

0 100 200 300 400


HEA

D -

MET

ERS

HEA

D -

FEE

T




SW-50-AF 511502 ½ 115 2" FNPT 12/1000 110.0 85.0 45.0 20.0 8.7 15' 45.0

SW-50-AS511551 ½ 115 2" FNPT 9.2/1086 110.0 85.0 45.0 20.0 8.7 10' 46.0511566 ½ 230 2" FNPT 4.6/1086 110.0 85.0 45.0 20.0 8.7 25' 47.0

64

1/2 HP Automatic Submersible Sewage Pump, 2" SolidsSWL-50-AD Series

Features

Powerful, ½ HP Permanent Split Capacitor (PSC) motor for high starting and running torque, with low amp draw to conserve electrical energy.

Recessed, vortex impeller made of tough, engineered composite material to reduce clogging. Will pass 2" spherical solids.

Upper and lower ball bearings for extended motor life.

Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) to assure maximum protection against pump failure.

Rugged cast iron pump housing with epoxy coating for corrosion resistance.

Diaphragm pressure switch for automatic operation.

Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation.

Stainless steel hardware to protect against corrosion.



SWITCHBREATHER

TUBE

OPERATIONAUTOMATIC

PIGGYBACK PLUG

Sewage

C US

65

SWL-50-AD Series 1/2 HP Automatic Submersible Sewage Pump, 2" Solids

Sewage

SWL-50-AD SWL-50


Impeller Material Engineered Composite

Impeller Type Recessed, vortex


Power Cord 16/3 SJTW-A



Shaft Cold Rolled Steel


Construction

Specifications

10.5

10.7

7.6

2" FNPT

7.6

10.7

2" FNPT

14.8

SWITCHOFF 5"

SWITCHON 15"

APPROX

APPROX

14.8

0

5

15

10

20

25

0 20 40 60 80 100 120


0.0

4.0

2.0

1.0

5.0

6.0

7.0

3.0

0 100 200 300 400


HEA

D -

MET

ERS

HEA

D -

FEE

T




SWL-50 511502 ½ 115 2" FNPT 12/1000 120.0 85.0 48.0 12.0 22.0 10' 53.0

SWL-50-AD511551 ½ 115 2" FNPT 9.2/1086 120.0 85.0 48.0 12.0 22.0 10' 54.0511566 ½ 230 2" FNPT 4.6/1086 120.0 85.0 48.0 12.0 22.0 20' 54.0

66

1/2 HP Manual Submersible Sewage Pump, 2" SolidsSW-50H Series


MOTOR DESIGNED FORMAXIMUM PERFORMANCE

DYNAMICALLYBALANCEDCAST IRONIMPELLER

STAINLESS STEEL LIFTING RING

CARBON & CERAMICFACE SEAL

EXCLUSION SEAL TOPROTECT MECHANICALSEAL

CAPACITOR ANDPOWER CORDCONNECTIONS

BALL BEARINGSUPPER AND LOWER

ALL CAST IRONCONSTRUCTION

WITH PROTECTIVEBAKED-ON EPOXY

COATING TO RESISTCORROSION

OIL-FILLED TODISSIPATE HEATFOR MAXIMUM LIFE

Features




Stainless steel screws, bolts and lifting ring.

Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) for long life and reliability.

Secondary exclusion seal to help protect mechanical seal.

½ hp, 1625 RPM, ball bearing motor and thermal overload protection.

Capacitor and power cord connections isolated from oil -filled motor housing for ease of field maintenance.

Dynamically balanced two-vane non-clogging impeller with pump-out vanes to enhance pumping performance and efficiency.


Sewage

115 V Models Only

67

SW-50H Series 1/2 HP Manual Submersible Sewage Pump, 2" Solids

Sewage

14.07

9.89

6.92

2.00

5.71

16.15


Impeller Material Epoxy Coated Cast Iron

Impeller Type Two Vane, Non-Clog


Power Cord 16/3, STW



Shaft Stainless Steel


Construction

Specifications

0

5

15

10

20

25

0 20 40 60 80 100 120


0.0

4.0

2.0

1.0

5.0

6.0

7.0

8.0

3.0

0 100 200 300 400


HEA

D -

MET

ERS

HEA

D -

FEE

T

MODEL NO. ITEM NO. HP VOLTS DISCHARGE SIZE RUNNINGAMPS/WATTS

PERFORMANCE (GPM) SHUT-OFF CORD

LENGTHWEIGHT

(LBS)10' 20' FEET PSI

SW-50H514322 ½ 115 2" 11.6/1100 100.0 35.0 25.0 10.8 20' 87.0514323 ½ 208-240 2" 4.6/1100 100.0 35.0 25.0 10.8 20' 88.0

68

1 HP Manual Submersible Sewage Pump, 2" SolidsSW-100 Series

STAINLESS STEEL LIFTING RINGHEAVY DUTY POWER CORD

ALL CAST IRONCONSTRUCTION

WITH PROTECTIVEBAKED-ON EPOXY

COATING TO RESISTCORROSION

OIL-FILLED TODISSIPATE HEATFOR EXTENDEDPUMP LIFE

CAPACITOR ANDPOWER CORDCONNECTIONS


CARBON & CERAMIC FACE SEAL

EXCLUSION SEALTO PROTECTMECHANICAL SEAL

DYNAMICALLYBALANCED CAST

IRON IMPELLER

MOTOR DESIGNEDFOR MAXIMUMPERFORMANCE

Features




Stainless steel screws, bolts and lifting ring.

Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) for long life and reliability.

Secondary exclusion seal to help protect mechanical seal.

1 hp ball bearing motor.


Permanent split capacitor design on single-phase models.

Capacitor and power cord isolated from oil-filled motor housing for ease of field maintenance.

Dynamically balanced two-vane non-clogging impeller with pump-out vanes to protect seal


Sewage

575 volt model is CSA only

69

SW-100 Series 1 HP Manual Submersible Sewage Pump, 2" Solids

*3-phase pumps require control panel to operate**Without plug

Sewage

14.07

9.89

6.92

2.00

5.71

16.15


Impeller Material Epoxy Coated Cast Iron

Impeller Type Two Vane, Non-Clog


Power Cord 16/3, STW





Construction

Specifications

0

5

15

30

10

20

35

25

40

0 20 40 60 80 100 120 140 160 180 200


0.0

8.0

4.0

2.0

10.0

12.0

6.0

0 100 200 300 400 500 600 700


HEA

D -

MET

ERS

HEA

D -

FEE

T

380V 50 Hz

60 Hz

MODELNO.

ITEMNO. HP VOLTS PHASE DISCHARGE

SIZERUNNING

AMPS/WATTSPERFORMANCE (GPM) SHUT-OFF CORD

LENGTH**WEIGHT

(LBS)5' 10' 20' 30' FEET PSI

SW-100

514621 1 230 1 3" 11.0/1900 180 160 100 32 35.0 15.1 20' 88.0514626 1 200-208 1 3" 11.0/2000 180 160 100 32 35.0 15.1 20' 88.0514721 1 230 3* 3" 6.3/1550 180 160 100 32 35.0 15.1 20' 88.0514731 1 460/380 3* 3" 3.2/1400 180 160 100 32 35.0 15.1 20' 88.0514741 1 575 3* 3" 2.5/1400 180 160 100 32 35.0 15.1 20' 88.0514751 1 200-208 3* 3" 6.8/1400 180 160 100 32 35.0 15.1 20' 88.0

70

1.5 HP Manual Submersible Sewage Pump, 2" SolidsSW-150 Series

HEAVY DUTYPOWER CORD

DYNAMICALLYBALANCED

BRASS IMPELLER

UPPER AND LOWERBALL BEARINGS

CARBON ANDCERAMIC FACE SEAL

STATOR PRESSED INTOHOUSING, ENGINEERED FOR EFFICIENT HEAT DISSIPATION


CAPACITOR ANDPOWER CORD

CONNECTIONS

ALL CAST IRON CONSTRUCTION WITH PROTECTIVE BAKED-ON EPOXY COATING TO RESIST CORROSION

OIL-FILLED TO DISSIPATE HEATFOR EXTENDED PUMP LIFE


Features




Stainless steel hardware.


1.5 hp ball bearing motor.

Exclusion seal.

Thermal overload protection on single phase units.


Brass impeller.


Sewage

71

SW-150 Series 1.5 HP Manual Submersible Sewage Pump, 2" Solids

*3-phase pumps require control panel

Sewage



Impeller Material Red Brass

Impeller Type Non-Clog


Power Cord 14/3, SOW (1-Phase), 14/4, SOW (3-Phase)

Mechanical Shaft Seal Carbon/Ceramic




Construction

2.0"

7.6"

18.4"

4.2"

12.9"

8.4"

6.5"

Specifications

0

10

30

60

20

40

70

50

0 20 40 60 80 100 120 140 160 180


0.0

20.0

10.0

5.0

15.0

0 100 200 300 400 500 600


HEA

D -

MET

ERS

HEA

D -

FEE

T

MODEL NO.


SIZERUNNING

AMPS/WATTSPERFORMANCE (GPH) SHUT-OFF CORD

LENGTHWEIGHT

(LBS)10' 20' 30' 40' 50' 60' FEET PSI

SW-150

520305 1.5 208 1 3" 16.0/3229 160.0 137.0 111.0 84.0 50.0 15.0 64.0 27.7 20' 96.0520306 1.5 230 1 3" 15.5/3512 160.0 137.0 111.0 84.0 50.0 15.0 64.0 27.7 20' 96.0520307 1.5 200-208 3* 3" 13.5/1644 160.0 137.0 111.0 84.0 50.0 15.0 64.0 27.7 20' 96.0520308 1.5 230 3* 3" 11.5/1512 160.0 137.0 111.0 84.0 50.0 15.0 64.0 27.7 20' 96.0520309 1.5 460 3* 3" 5.3/1474 160.0 137.0 111.0 84.0 50.0 15.0 64.0 27.7 20' 96.0

72

2 HP Manual Submersible Sewage Pump, 2" SolidsSW-200 Series

Features




Stainless steel screws, bolts and seal assembly.


2 hp ball bearing motor.

Exclusion seal.

Thermal overload protection on single phase units.


Brass impeller.


Sewage

HEAVY DUTYPOWER CORD

CARBONAND CERAMIC

FACE SEAL


CAPACITOR ANDPOWER CORD

CONNECTIONS

DYNAMICALLYBALANCED

BRASS IMPELLER


ALL CAST IRONCONSTRUCTION WITHPROTECTIVE BAKED-ONEPOXY COATING TORESIST CORROSION

STATOR PRESSED INTO HOUSINGENGINEERED FOR EFFICIENT HEAT DISSIPATION


OIL-FILLED TO DISSIPATE HEAT FOR EXTENDED PUMP LIFE

73

SW-200 Series 2 HP Manual Submersible Sewage Pump, 2" Solids

Sewage

1.77

6.27

17.08

4.21

12.92

8.42

6.50



Impeller Material Red Brass

Impeller Type Non-Clog


Power Cord 14/3, SOW

Mechanical Shaft Seal Carbon/Ceramic




Construction

*3-phase pumps require control panel

Specifications

0

10

30

60

80

20

40

70

50

0 25 50 75 100 125 150 175 200 225


0.0

20.0

10.0

5.0

15.0

0 200 400 600 800


HEA

D -

MET

ERS

HEA

D -

FEE

T

MODEL NO.


SIZERUNNING


LENGTHWEIGHT

(LBS)10' 20' 30' 40' 50' 60' FEET PSI

SW-200

520101 2 208/230 1 3" 18.0/4118 205.0 168.0 140.0 115.0 90.0 70.0 77.0 33.3 20' 96.0520126 2 200-208 3* 3" 14.5/2769 205.0 168.0 140.0 115.0 90.0 70.0 77.0 33.3 20' 96.0520151 2 230 3* 3" 12.6/2686 205.0 168.0 140.0 115.0 90.0 70.0 77.0 33.3 20' 96.0520176 2 460 3* 3" 6.1/2771 205.0 168.0 140.0 115.0 90.0 70.0 77.0 33.3 20' 96.0

74

2 HP Manual Submersible Grinder PumpSWG-200 Series

Features

Compact and light package, only 75 lbs.

Non-overloading design.

Externally mounted start components.

Mechanical seal: carbon/ceramic.

Deflection resistant, short motor shaft.

Corrosion resistant brass impeller minimizes downtime and maintenance.

Seven-vane, angled face, non-clogging, balanced impeller.

Tight cutting clearances for better cutting action.

Epoxy coated finish for corrosion resistance and durability.

Built-in overload protection prevents over-current and over-temperature damage.

GP-CK Grinder Capacitor Kit

To be used to operate SWG-200.

Includes:

Start capacitor.

Run capacitor.

Relay.

End caps.

Mounting hardware.

Grinder

75

SWG-200 Series 2 HP Manual Submersible Grinder Pump

Grinder

Shown with Stainless Steel GLK Series Grinder Leg Kit. See dealer for details.

5.50

11.40

9.63

5.75

2.98

9.30

11.50

16.10

13.10

Motor Cover Epoxy Coated Cast Iron

Motor Cover O-ring Nitrile

Motor DesignSingle-Phase, Capacitor Start, Capacitor Run

Insulation Class F

Overload ProtectionInternal, On Winding Thermal Protector

Motor Shaft AISI 300 SeriesStainless Steel

Upper Ball Bearing Single Row Ball, 6203

Lower Ball Bearing Single Row Ball, 6306

Seal Housing Epoxy Coated Cast Iron

Mechanical Seal Carbon/Ceramic


Impeller Brass

Rotating Cutter

Two Blade Design, AISI 440C Stainless Steel, Through Hardened to Rockwell 55-60C

Stationary Cutter

AISI 440C Stainless Steel, Through Hardened to Rockwell 55-60 °C

External Hardware300 SeriesStainless Steel

Power CableType SOOW orSOW 14/4 AWG

Construction

Specifications

0

20

60

120

40

80

140

100

0 5 10 15 20 25 30 35


0.0

40.0

20.0

10.0

30.0

0 25 50 75 125100


HEA

D -

MET

ERS

HEA

D -

FEE

T

MODEL NO. ITEMNO. HP VOLTS DISCHARGE

SIZERUNNING


LENGTHWEIGHT

(LBS)20' 40' 60' 80' 100' 120' FEET PSI

SWG-200520854 2 208 1.25" FNPT 13.9/3200 32.0 31.0 30.0 25.0 20.0 10.0 130.0 65.0 15' 75.0520866 2 230 1.25" FNPT 13.9/2000 32.0 31.0 30.0 25.0 20.0 10.0 130.0 65.0 15' 75.0

SWG-200-AF 520876 2 230 1.25" FNPT 13.9/2000 32.0 31.0 30.0 25.0 20.0 10.0 130.0 65.0 20' 75.0

Documents

4/10 HP Submersible Sewage Pump, 2 Solids - brm.mx · 4/10 HP Submersible Sewage Pump, 2" Solids SW-40 Series Features Handles liquids and solid waste materials up to 2" diameter