Upload
dodiep
View
762
Download
25
Embed Size (px)
Citation preview
Particulate Respirators Filters
N95Applications:
Grinding, sanding andother dusty operations• available in small 8110S
8210
N95Applications:
Same as 8210 plus otherhot/dusty operations
8511
N95Applications: Welding,metal cutting/pouring,grinding, sanding, andother dusty/hot operations
8512
N95Applications:
Same as 8512• with faceseal
8212
N95Applications:Welding, metalcutting/pouring, grinding,sanding, foundry, labs,petrochemical, undercoating 1
8514
N95Applications:
Same as 8514• with faceseal 1
8214
R95Applications:
Glass etching, chemicalprocessing, paper processing, brewing, aluminum smelting 38246
R95Applications:
Foundry operations, labs,agriculture, petrochemi-cal, undercoating 2
8247
P95Applications:
Grinding, sanding, bagging and otherdusty/oily operations
2071
P95Applications:Aluminum smelting, glass etching, chemicalmanufacturing, hydrogenfluoride gas up to 10 times PEL 3
2076HF
P95Applications:
Utilities operations, chemical manufacturing,aluminum smelting 1,3
2078
P100Applications:
Welding, metal pouring,OSHA substance specificparticle exposures, pharmaceuticals2091
P100Applications:
Same as 2091 plus utilityoperations, chemicalmanufacturing, aluminumsmelting 32096
P100Applications:
Same as 2091 pluschemical manufacturing,undercoating 1
2097
P100Applications:
Same as 2091 • hard shell
7093
P95Applications:
Grinding, sanding,machining and otherdusty/oily operations
8271
P95Applications:
Same as 8246 plus hot oper-ations 3
8576
P95Applications:
Same as 8247 plus hotoperations 2
8577
P100Applications:
Same as 8233
8293
N100Applications:OSHA substance specificparticle exposures (lead,cadmium, arsenic, 4,4’-methylenedianiline)and pharmaceuticals
8233
3M Series6000 FullFacepiece
6700 Small6800 Medium6900 Large
R95Applications:
Grinding, sanding andother dusty/oily opera-tions
8240
3M Series6000 HalfFacepiece
6100 Small6200 Medium6300 Large
3M Respirator and Filter Selection Guide
C1
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 1
Cartridges
N95For use with 6000series cartridges
5N11
P95For use with 6000series cartridges
5P71
Filter retainer foruse with 5N11 or5P71 filters
501
Filter adapter foruse with 2071 or2091 filters
502
OVFor use with:
Certain organic vapours
6001
AGFor use with:Chlorine, hydrogen chloride, and sulphurdioxide or chlorine dioxideor hydrogen sulphide(escape only)
6002
OV/AGFor use with:Certain organic vapours,chlorine, hydrogen chloride,and sulphur dioxide orhydrogen sulphide (escapeonly) or hydrogen fluoride
6003
AMFor use with:
Ammonia andmethylamine
6004
FORMFor use with:
Formaldehyde and certainorganic vapours
6005
MGFor use with:Certain organic vapours, chlo-rine, hydrogen chloride, chlo-rine dioxide, hydrogen sulphide(escape only), ammonia/ methy-lamine, formaldehyde or hydro-gen fluoride
6006
HGFor use with:
Mercury vapour or chlo-rine gas6009
OV/P100Same as 6001 with P100particulate filter
60921
AG/P100Same as 6002 with P100particulate filter
60922
OV/AG/P100Same as 6003 with P100particulate filter
60923
AM/P100Same as 6004 with P100particulate filter
60924
FORM/P100Same as 6005 with P100particulate filter
60925
MG/P100Same as 6006 with P100particulate filter
60926
HG/P100Same as 6009 with P100particulate filter
60929
1 3M recommended for uo to 10 timesPEL of ozone and nuisance levelorganic vapour relief
2 3M recommended for nuisance levelorganic vapour relief
3 3M recommended for nuisance levelacid gas relief
Nuisance levels refer to concentrationsbelow the OSHA PEL
3M Series 7000+Half Facepiece
7001 Small7002 Medium7003 Large
3M Series 7800Full Facepiece
7800SS Small7800SM Medium7800SL Large
Filters
3M Cartridge Selection Guide
C2
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 2
The 3M 8210 N95 ParticulateRespirator is designed to helpprovide quality, reliable workerprotection against certain non-oilbased particles. The 8210 offersa number of benefits to you andyour workers.
• Meets NIOSH 42 CFR 84N95 requirements. TC-84A-0007
• Excellent worker protectionBecause they are comfortableto wear and easy to use,workers are quick to acceptand use maintenance-freerespirators, like the 8210.Studies have shown they canprovide protection equivalentto a rubber facepiecerespirator... at much lower costand greater convenience.
• Lightweight construction- Promotes greater workercomfort.- Contributes to increasedwear time.
• All filter design- Provides economicalprotection.- No spare parts to clean andmaintain.- Promotes easier communication.
• Advanced Electret Media (AEM)- Enables the respirator to filter effectively without
sacrificing breathability.
• Adjustable noseclip- Helps provide a custom fit and secure seal.- Reduces the potential for eyewear fogging.
Suggested Applications
• Grinding• Sanding• Sweeping• Bagging• Other dusty operations
Use For:
• Solids such as those from processing minerals, coal,iron ore, flour, and certain other substances.
• Liquid or non-oil based particles from sprays that donot also emit harmful vapors.
Do Not Use For:
Paint spray, oil aerosols, gases, vapors, asbestos orsandblasting, aerosol concentrations that exceed 10times the OSHA PEL, or applicable governmentregulations, whichever is lower. This respirator does notsupply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8210
027-8210
Respirators Per Box: 20
Respirators Per Case 160
3M 8210 N95 Particulate Respirator
C3
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 3
The 3M 8212 N95 ParticulateRespirator is designed forapplications such as welding,soldering and other operationswhere metal fumes are present.The 8212 provides a minimumfilter efficiency of 95% againstnon-oil based particles. Thisproduct’s many features provideworkers comfortable, durablerespiratory protection.
• Meets NIOSH 42 CFR 84N95 requirements. TC-84A-0454
• 3M Cool Flow ExhalationValve - Patented one-wayvalve offers easy exhalationand cool, dry comfort.
• Cake-resistant filter media- Uniquely-designed filter layersreduce the caking of particleson the respirator surface.- Helps make the respiratorbreathe easier longer, whichcontributes to longer servicelife and increased savings.
• Faceseal- Comfortable to wear.- Contours easily to helpprovide a good seal.
• Lightweight construction- Promotes greater workercomfort.
• All filter design- Provides economical protection.- No spare parts to maintain.- Promotes easier communication.
• Adjustable noseclip- Helps provide a custom fit and secure seal.- Reduces the potential for eyewear fogging.
• Fully adjustable straps- A single tug helps provide a comfortable, secure fit.
Suggested Applications
• Welding• Brazing• Soldering• Torch cutting• Metal pouring• Grinding• Sanding• Sweeping• Bagging• Other dusty/hot operations
Use For:
• Solids such as those from processing minerals, coal,iron ore, flour, and certain other substances.
• Liquid or non-oil based particles from sprays that donot also emit harmful vapors.
• Metal fumes produced from welding, cutting and otheroperations involving heating of metals.
Do Not Use For:
Paint spray, oil aerosols,gases, vapors, asbestos orsandblasting. Aerosol concentrations that exceed 10times the OSHA PEL, or applicable governmentregulations, whichever is lower. This respirator does notsupply oxygen.
This respirator contains no components made fromnatural rubber latex.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated areaand dispose of the respirator.
Ordering Information:
8212
027-8212
Respirators Per Box: 10
Respirators Per Case: 80
3M 8212 N95 Particulate Respirator
C4
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 4
The 3M 8214 N95 ParticulateRespirator is designed forapplications such as welding,soldering and other operationsinvolving metal fumes includingthose with ozone and nuisancelevels of organic vapors. The8214 provides a minimum filterefficiency of 95% against non-oilbased particles. This product’smany features help provideworkers comfortable, durablerespiratory protection.
• Meets NIOSH 42 CFR 84N95 requirements. TC-84A-0454
• 3M Cool Flow ExhalationValve- Patented one-way valveoffers easy exhalation forcooler dry comfort.
• Cake-resistant filter media-Uniquely-designed filter layersreduce the caking of particleson the respirator surface.-Helps make the respiratorbreathe easier longer, whichcontributes to comfort, longerservice life and increasedsavings.
• Faceseal -Contours easily to help provide a good seal.-Comfortable to wear.
• Lightweight construction-Promotes greater worker comfort.
• All filter design-Provides economical protection.-No spare parts to maintain.-Promotes easier communication.
• Adjustable noseclip-Helps provide a custom fit and secure seal.-Reduces the potential for eyewear fogging.
• Fully adjustable straps-A single tug helps provide a comfortable, secure fit.
• Suggested Applications
Use For:
• Solids such as those from processing minerals, coal,iron ore, flour, and certain other substances.
• Liquid or non-oil based particles from sprays that donot also emit harmful vapors.
• Metal fumes produced from welding, cutting and otheroperations involving heating of metals.
Do Not Use For:
Paint spray, oil aerosol, gases, asbestos orsandblasting. Aerosol and/or ozone concentrations thatexceed 10 times the OSHA PEL, or applicablegovernment regulations, whichever is lower. Do not usewhen concentrations of organic vapors exceedOSHA PEL or applicable government occupationalexposure limits, whichever is lower. These respirators donot supply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator.
Ordering Information:
8214
• Welding• Brazing• Soldering• Torch culling• Metal pouring• Grinding
• Sanding• Sweeping• Bagging• Other
dusty/hotoperations
• Foundryoperations
• Lab settings• Petrochemical
operations• Undercoating 027-8214
Respirators Per Box: 10
Respirators Per Case: 80
3M 8214 N95 Particulate Respirator
C5
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 5
The 3M 8233 N100 ParticulateRespirator is well suited for thosewho want NIOSH’s highest ratedfiltration efficiency in amaintenance free respirator. Itprovides a minimum filterefficiency of 99.97% againstnon-oil based particles. Thisrespirator is an excellent choicefor lead abatement,pharmaceutical manufacturing,welding and work involvingsubstance specific regulatedparticles excluding thosecontaining oil aerosols andasbestos.
The 8233 offers a number ofbenefits to you and yourworkers:
• Meets NIOSH 42 CFR 84N100 requirements TC-84A-1298
• 3M Cool Flow ExhalationValve-Patented one-way valve offerseasy exhalation and cool, drycomfort.
• Faceseal- Comfortable to wear.- Contours easily to helpprovide a good seal.
• Adjustable noseclip- Helps provide a custom fit and secure seal.- Reduces the potential for eyewear fogging.
• Lightweight construction- Promotes greater worker comfort.- Contributes to increased wear time.
• All filter design- Provides economical protection.- No spare parts to maintain.- Promotes easier communication.
Suggested Applications
• OSHA substance specific particle exposures — Lead— Cadmium— Arsenic—-4,4, — Methylenedianiline (MDA)
• Pharmaceutical manufacturing• Welding• Brazing• Soldering• Torch cutting• Metal pouring
Use For:
• Solids such as those from processing minerals, coal,iron ore, flour, and certain other substances.
• Liquid or non-oil based particles from sprays that donot also emit harmful vapors.
• Metal fumes produced from welding, cutting and otheroperations involving heating of metals.
Do Not Use For:
Paint spray, oil aerosols, gases, vapors, asbestos orsandblasting. Aerosol concentrations that exceed 10times the OSHA PEL, or applicable governmentregulations, whichever is lower. This respirator does notsupply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator.
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8233
027-8233
Respirators Per Bag: 1
Respirators Per Case: 20
3M 8233 N100 Particulate Respirator
C6
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 6
The 3M 8240 N95 ParticulateRespirator is designed to helpprovide quality, reliable workerprotection against certain oil andnon-oil based particles. It is anexcellent choice for those whohave work environments thatmay contain oil aerosols. The8240 offers a number of benefitsto you and your workers.
• Meets NIOSH 42 CFR 84R95 requirements. TC-84A-1350
• Excellent worker protection- Because they arecomfortable to wear and easyto use, workers are quick toaccept and use maintenance-free respirators, like the 8240.
• Lightweight construction- Promotes greater workercomfort- Contributes to increasedwear time.
• All filter design- Provides economicalprotection.- No spare parts to clean andmaintain.- Promotes easiercommunication.
• Collapse Resistant Shell- Increased durability- Reliable in most hot, humid conditions.
• M-noseclip- Adjusts easily with fewer pressure points and greatercomfort.- Reduces the potential for eyewear fogging.- Helps provide a custom fit.
Suggested Applications
• Grinding• Sanding• Sweeping• Machining• Other dusty/oily operations
Use For:
Solids such as those from processing minerals, coal,iron ore, flour, and certain other substances.Liquid or oil based particles from sprays that do not alsoemit harmful vapors.
Do Not Use For:
Paint spray, gas, vapors. asbestos or sandblasting.aerosol concentrations that exceed 10 times the OSHAPEL, or applicable government regulations, whichever islower This respirator does not supply oxygen.
Time Use Limitation
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator. If oil aerosols are present. timeuse may be limited to 8 hours of continuous orintermittent use.
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8240
027-8240
Respirators Per Box: 20
Respirators Per Case: 120
3M 8240 R95 Particulate Respirator
C7
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 7
Nuisance LevelAcid Gas ReliefThe 3M 8246 R95 ParticulateRespirator provides reliableworker protection against certainoil and non-oil based aerosolparticles including those presentwith nuisance levels of acidgases such as sulphur dioxide,hydrogen fluoride and/orchlorine. This respirator offers anumber of benefits to you andyour workers:
• Meets NIOSH 42 CFR 84R95 requirements. TC~84A-1350.
• Lightweight construction- Promotes greater workercomfort.- Contributes to increasedwear time.
• All filter design- Provides economicalprotection.- No spare parts to maintain.- Promotes easiercommunication.
• Adjustable noseclip- Helps provide a custom fitand secure seal.- Reduces the potential foreyewear fogging.
Suggested Applications
• Glass etching• Chemical processing• Paper processing• Brewing operations• Aluminum smelting
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays tat do notalso emit harmful vapors.
• Nuisance level acid gases such as Sulfur Dioxide,Hydrogen Fluoride and/or Chlorine.
Do Not Use For:
Paint spray, vapors, asbestos or sandblasting. Do notuse when concentrations of acid gases exceed theOSHA PEL or applicable government occupationalexposure limits, whichever is lower. This respirator doesnot supply oxygen. Aerosol concentrations that exceed10 times the OSHA PEL, or applicable governmentregulations, whichever is lower.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator. If oil aerosols are present timeuse may be limited to 8 hours of continuous orintermittent use.
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8246
027-8246
Respirators Per Box: 20
Respirators Per Case: 120
3M 8246 R95 Particulate Respirator
C8
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 8
Nuisance LevelOrganic VaporReliefThe 3M 8247 R95 ParticulateRespirator is designed to helpprovide reliable worker protectionagainst certain oil and non-oilbased particles including thosepresent with nuisance levels oforganic vapors such as solvents,degreasers, and resins.
This respirator offers a numberof benefits to you and yourworkers:
• Meets NIOSH 42 CFR 84R95 requirements TC-84A-1350
• Lightweight construction- Promotes greater workercomfort.- Contributes to increasedwear time.
• All filter design- Provides economicalprotection.- No spare parts to clean andmaintain.- Promotes easiercommunication.
• Adjustable noseclip- Helps provide a custom fit and secure seal.- Reduces the potential for eyewear fogging.
Suggested Applications
• Foundry operations• Lab settings • Agriculture• Petrochemical manufacturing• Undercoating
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays tat do notalso emit harmful vapors.
• Nuisance level organic vapor relief.
Do Not Use For:
Paint spray, gases, asbestos or sandblasting. Aerosolconcentrations that exceed 10 times the OSHA PEL orapplicable government regulations, whichever is lower.Do not use when concentrations of organic vaporsexceed the OSHA PEL or applicable governmentoccupational exposure limits, whichever is lower. Thisrespirator does not supply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator. if oil aerosols are present, timeuse may be limited to 8 hours of continuous orintermittent use.
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8247
027-8247
Respirators Per Box: 20
Respirators Per Case: 120
3M 8247 R95 Particulate Respirator
C9
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 9
The 3M 8271 P95 ParticulateRespirator combines P-seriesversatility with exceptionalcomfort and fit. It is an excellentchoice for those who have workenvironments that may containoil aerosols.
This respirator offers a numberof benefits to you and yourworkers:
• Meets NIOSH 42 CFR 84 P95requirements. TC-84A-1166
• 3M Cool Flow ExhalationValve- Patented one-way valveoffers easy exhalation andcool, dry comfort.
• M-noseclip- Adjusts easily with fewerpressure points and greatercomfort.- Reduces the potential foreyewear fogging.- Helps provide a custom fitand secure seal.
• Faceseal- Comfortable to wear.- Conforms easily to helpprovide a good seal across awide range of faces.
• Lightweight construction- Promotes greater worker comfort.- Contributes to increased wear time.
• All filter design- Provides economical protection.- No spare parts to clean and maintain.- Promotes easier communication.
Suggested Applications• Grinding• Sanding• Sweeping• Bagging• Machining• Other dusty/oily operations
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays that do notalso emit harmful vapors.
Do Not Use For:
Paint spray, gases, vapors, asbestos or sandblasting.Aerosol concentrations that exceed 10 times the OSHAPEL or applicable government regulations, whichever islower. This respirator does not supply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator. If used in environmentscontaining only oil aerosols, dispose of respirator after40 hours of use or 30 days, whichever is first.
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8271
027-8271
Respirators Per Box: 10
Respirators Per Case: 80
3M 8271 R95 Particulate Respirator
C10
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 10
The 3M 8293 P100 ParticulateRespirator is well suited for thosewho want NIOSH’s highest ratedfiltration efficiency in amaintenance free respirator. Itprovides a minimum filterefficiency of 99.97% against oiland non-oil based particles.Thisrespirator is an excellent choicefor lead abatement,pharmaceutical manufacturing,welding and work involvingsubstance specific regulatedparticles excluding thosecontaining asbestos. It is anexcellent choice for those whohave work environments thatmay contain oil aerosols.
The 8293 offers a number ofbenefits to you and yourworkers:
• Meets NIOSH 42 CFR 84P100 requirements. TC-84A-2561
• 3M Cool Flow ExhalationValve- Patented one-way valveoffers easy exhalation andcool, dry comfort.
• Faceseal- Comfortable to wear.- Contours easily to help provide a good seal.
• Adjustable noseclip- Helps provide a custom fit and secure seal.- Reduces the potential for eyewear fogging.
• Lightweight construction- Promotes greater worker comfort.- Contributes to increased wear time.
• All filter design- Provides economical protection.- No spare parts to maintain.- Promotes easier communication.
Suggested Applications
• OSHA substance specific particle exposures — Lead— Cadmium— Arsenic—4,4’— Methylenedianiline (MDA)
• Pharmaceutical manufacturing• Welding• Brazing• Soldering• Torch cutting• Metal pouring
Use For:
• Solids such as those from processing minerals, coal,iron ore, flour, and other certain substances.
• Liquid or oil based particles from sprays that do notalso emit harmful vapors.
• Metal fumes produced from welding, cutting and otheroperations involving heating of metals.
• Radioactive particulate material such as uranium andplutonium.
Do Not Use For:
Paint spray, gases, vapors, asbestos or sandblasting.Aerosol concentrations that exceed 10 times the OSHAPEL, or applicable government regulations, whichever islower. This respirator does not supply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator. If used in environmentscontaining only oil aerosols, dispose of respirator after40 hours of use or 30 days, whichever is first.
Ordering Information:
8293
027-8293
Respirators Per Bag: 1
Respirators Per Case: 20
3M 8293 P100 Particulate Respirator
C11
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 11
The 3M 8511 N95 ParticulateRespirator is uniquely designedto help provide comfortable,reliable worker protection. It isideally suited for work settingsthat involve heat, humidity, orlong periods of wean
This respirator offers a numberof benefits to you and yourworkers:
• Meets NIOSH 42 CFR 84N95 requirements TC-84A-1299
• 3M Cool Flow ExhalationValve- Patented one-way valveoffers easy exhalation andcool, dry comfort.
• M-noseclip- Adjusts easily for fewerpressure points and greatercomfort.- Reduces the potential foreyewear fogging.- Helps provide a custom fitand secure seal.
• Lightweight construction- Promotes greater workercomfort.- Contributes to increasedwear time.
• All filter design- Provides economical protection.- No spare parts to clean and maintain.- Promotes easier communication.
Suggested Applications
• Grinding• Sanding• Sweeping• Bagging• Other dusty/hot operations
Use For:
• Solids such as those from processing minerals, coal,iron ore, flour, and certain other substances.
• Liquid or non-oil based particles from sprays that donot also emit harmful vapors.
Do Not Use For:
Paint spray, oil aerosols Gases, vapors, asbestos orsandblasting. Aerosol concentrations that exceed 10times the OSHA PEL or applicable governmentregulations, whichever is lower. This respirator does notsupply oxygen.
This respirator contains no components made fromnatural rubber latex.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator.
Ordering Information:
8511
027-8511
Respirators Per Box: 10
Respirators Per Case:80
3M 8511 N95 Particulate Respirator
C12
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 12
The 3M 8512 N95 ParticulateRespirator is designed forapplications such as welding,soldering and other operationswhere metal fumes are present.The 8512 provides a minimumfilter efficiency of 95% againstnon-oil based particles. Thisproduct’s many features provideworkers comfortable, durablerespiratory protection.
• Meets NIOSH 42 CFR 84N95 requirementsTC-84A-0454
• 3M Cool Flow ExhalationValve- Patented one-way valveoffers easy exhalation andcool, dry comfort.
• Cake-resistant filter media- Uniquely-designed filter layersreduce the caking of particleson the respirator surface.- Helps make the respiratorbreathe easier longer, whichcontributes to longer servicelife and increased savings.
• Lightweight construction- Promotes greater workercomfort.
• All filter design- Provides economical protection.- No spare parts to maintain.- Promotes easier communication.
• Adjustable noseclip- Helps provide a custom fit and secure seal.- Reduces the potential for eyewear fogging.
• Fully adjustable straps- A single tug helps provide a comfortable, secure fit.
Suggested Applications
• Welding• Brazing• Soldering• Torch cutting• Metal pouring• Grinding• Sanding• Sweeping• Bagging• Other dusty/hot operations
Use For:
• Solids such as those from processing minerals, coal,iron ore, flour, and certain other substances.
• Liquid or non-oil based particles from sprays that donot also emit harmful vapors.
• Metal fumes produced from welding, cutting and otheroperations involving heating of metals.
Do Not Use For:
Paint spray, oil aerosols,gases, vapors, asbestos orsandblasting. Aerosol concentrations that exceed 10times the OSHA PEL, or applicable governmentregulations, whichever is lower. This respirator does notsupply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator.
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8512
027-8512
Respirators Per Box: 10
Respirators Per Case: 80
3M 8512 N95 Particulate Respirator
C13
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 13
The 3M 8214 N95 ParticulateRespirator is designed forapplications such as welding,soldering and other operationsinvolving metal fumes includingthose with ozone and nuisancelevels of organic vapors. The8514 provides a minimum filterefficiency of 95% against non-oilbased particles. This product’smany features help provideworkers comfortable, durablerespiratory protection.
Meets NIOSH 42 CFR 84 N95requirements. TC-84A-0454
• 3M Cool Flow ExhalationValve- Patented one-way valveoffers easy exhalation forcooler dry comfort.
• Cake-resistant filter media-Uniquely-designed filter layersreduce the caking of particleson the respirator surface.-Helps make the respiratorbreathe easier longer, whichcontributes to comfort, longerservice life and increasedsavings.
• Lightweight construction-Promotes greater workercomfort.
• All filter design-Provides economical protection.-No spare parts to maintain.-Promotes easier communication.
• Adjustable noseclip-Helps provide a custom fit and secure seal.-Reduces the potential for eyewear fogging.
• Fully adjustable straps-A single tug helps provide a comfortable, secure fit.
• Suggested Applications
• Welding• Brazing• Soldering• Torch culling• Metal pouring• Grinding• Sanding• Sweeping• Bagging• Other dusty/hot operations• Foundry operations• Lab settings• Petrochemical operations• Undercoating
Use For:
• Solids such as those from processing minerals, coal,iron ore, flour, and certain other substances.
• Liquid or non-oil based particles from sprays that donot also emit harmful vapors.
• Metal fumes produced from welding, cutting and otheroperations involving heating of metals.
Do Not Use For:
Paint spray, oil aerosol, gases, asbestos orsandblasting. Aerosol and/or ozone concentrations thatexceed 10 times the OSHA PEL, or applicablegovernment regulations, whichever is lower. Do not usewhen concentrations or organic vapors exceed theOSHA PEL or applicable government occupationalexposure limits, whichever is lower. These respirators donot supply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator.
Ordering Information:
8514
027-8514
Respirators Per Box: 10
Respirators Per Case: 80
3M 8514 N95 Particulate Respirator
C14
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 14
Nuisance LevelAcid Gas ReliefThe 3M 8576 P95 ParticulateRespirator is designed to providecomfortable, reliable workerprotection against certain oil andnon-oil based aerosol particlesincluding those present withnuisance levels of acid gasessuch as sulphur dioxide,hydrogen fluoride and/orchlorine.
An excellent choice for worksettings that involve heat,humidity and long periods ofwear.
The 8576 offers a number ofbenefits to you and yourworkers:
• Meets NIOSH 42 CFR 84 P95requirements.TC-84A-1166
• 3M Cool Flow ExhalationValve- Patented one-way valve foreasy exhalation and cool, drycomfort.
• M-noseclip- Adjusts easily for fewerpressure points and greatercomfort.- Reduces the potential for eyewear fogging.- Helps provide a custom fit and secure seal.
• Lightweight construction- Promotes greater worker comfort.- Contributes to increased wear lime.
• All filter design- Provides economical protection.- No spare parts to clean and maintain.- Promotes easier communication.
Suggested Applications
• Glass etching• Chemical processing• Paper processing• Brewing operations• Aluminum smelting
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays that do notalso emit harmful vapors.
• Nuisance level acid gases such as Sulfur Dioxide,Hydrogen Fluoride and/or Chlorine.
Do Not Use For:
Paint spray, vapors, asbestos or sandblasting. Do notuse when concentrations of acid gases exceed the 051-IA PEL or applicable government occupational exposurelimits, whichever is lower. Aerosol concentrations thatexceed 10 times the OSHA PEL, or applicablegovernment regulations whicheveris lower. This respirator does not supply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator. If used in environmentscontaining only oil aerosols, dispose of respirator after40 hours of use or 30 days, whichever is first.
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8576
027-8576
Respirators Per Box: 10
Respirators Per Case: 80
3M 8576 P95 Particulate Respirator
C15
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 15
Nuisance LevelOrganic VaporReliefThe 3M 8577 P95 ParticulateRespirator is designed to helpprovide comfortable, reliableworker protection against certainoil and non-oil based aerosolparticles including those presentwith nuisance levels of organicvapors such as solvents,degreasers and resins.
An excellent choice for worksettings involving heat, humidity,and long periods of wean Thisrespirator offers a number ofbenefits to you and yourworkers:
• Meets NIOSH 42 CFR 84 P95requirements. TC-84A-1166
• 3M Cool Flow ExhalationValve- Patented one-way valveoffers easy exhalation andcool, dry comfort.
• M-noseclip- Adjusts easily for fewerpressure points and greatercomfort.- Reduces the potential foreyewear fogging.- Helps provide a custom fit and secure seal.
• Lightweight construction- Promotes greater worker comfort.- Contributes to increased wear time.
• All filter design- Provides economical protection.- No spare parts to clean and maintain.- Promotes easier communication.
Suggested Applications
.• Foundry operations• Lab settings• Agriculture• Petrochemical manufacturing• Undercoating
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays that do notalso emit harmful vapors.
Do Not Use For:
Paint spray, gases, asbestos or sandblasting. Aerosolconcentrations that exceed 10 times the OSHA PEL orapplicable government regulations, whichever is lower.Do not use when concentrations of organic vaporsexceed the OSHA PEL or applicable governmentoccupational exposure limits, whichever is lower. Thisrespirator does not supply oxygen.
Time Use Limitation:
If respirator becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the respirator. If used in environmentscontaining only oil aerosols, dispose of respirator after40 hours of use or 30 days, whichever is first.
This respirator contains no components made fromnatural rubber latex.
Ordering Information:
8577
027-8577
Respirators Per Box: 10
Respirators Per Case: 80
3M 8577 P95 Particulate Respirator
C16
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 16
2071 P95ParticulateFilterThe 3M 2071 P95Particulate Filter withadvanced filtrationtechnology has beendeveloped with yourrespiratory needs inmind.
The 2071 providesyou and yourworkers:
• Comfort. 3M’s advanced filter technology provides alightweight, easy breathing combination not found infiberglass containing filters.
• Versatile protection. The 2071 is well suited for awide range of oil and non-oil based particulatecontaminants. This filter is ideal for grinding, welding,sanding, sawing, sweeping, bagging or as a prefilterfor certain chemical exposures.
• Simplicity. The versatility of this filter reduces yourinventory and training requirements.
• Compatibility. The 2071 can be used with 3M’s widevariety of half and full facepieces.
• Durability. The unique flexible filter resists abrasionand wetting.
Suggested Applications
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays that do notalso emit harmful vapors.
• Metal fumes produced from welding, brazing, cuttingand other operations involving heating of metals.
Do Not Use For:
Gases and vapors including those present in paintspraying operations, unless combined with approvedchemical cartridges. Asbestos. Sandblasting. Thisrespirator filter does not supply oxygen. Concentrationsthat exceed 10 times the OSHA PEL, with a halffacepiece, or 50 times the PEL with a full facepiece orapplicable government regulations, whichever is lower.
Time Use Limitation:
If filter becomes damaged. soiled, or breathingbecomes difficult. leave the contaminated area anddispose of the filter. If used in environments containingonly oil aerosols, dispose of filter after 40 hours of useor 30 days, whichever is first.
Ordering Information:
2071
• Grinding• Welding• Sanding• Sawing
• Sweeping• Bagging• Other dusty,
oily operations
• Welding• Torch cutting• Brazing• Soldering
2076HF P95Particulate/HydrogenFluorideCartridgewithNuisanceLevel AcidGas ReliefThe 3M 2076HF P95Cartridge featuring3M Advanced Electret Media has been developed withyour respiratory needs in mind.
The 2076HF provides you and your workers:
• Comfort. The uniquely designed 2076HF cartridge islighter and easier to breathe through than competitivecartridge/filter combinations.
• Versatile protection. The 2076HF is well suited for awide range of oil and non-oil based particulatecontaminants, hydrogen fluoride and nuisance levelsof acid gases.
• Economy. The 2076HF is attractively priced incomparison to filter/cartridge combinations.
• Simplicity. With the versatility this P-series filterprovides, your inventory and training requirements arereduced. The design makes the product easy forworkers to use.
• Compatibility. The 2076HF can be used with 3M’swide variety of half and full facepieces.
• Durability. Unique flexible filter material enables theproduct to be worn in close quarters. Its ruggedconstruction resists abrasion and wetting.
Suggested Applications
• Aluminum smelting• Glass Etching• Chemical manufacturing
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays that do notalso emit harmful vapors.
• Metal fumes produced from welding, brazing, cuttingand other operations involving heating of metals.
• Hydrogen Fluoride gas up to 10 times PEL. Acidgases such as Sulfur Dioxide and/or Chlorine belowthe OSHA PEL or applicable government standards.whichever is lower.
2076HF
027-2071
Filters Per Bag: 2
Filters Per Case: 100
3M Particulate Filters
C17
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 17
Do Not Use For:
Gases and vapors other than Hydrogen Fluoride, whenconcentrations exceed the OSHA PEL, or applicablegovernment standards. whichever is lower, includingthose present in paint spray operations, unlesscombined with approved chemical cartridges. Asbestos.Sandblasting. This respirator cartridge does not supplyoxygen. Concentrations that exceed 10 times the OSHAPEL with a half facepiece or 50 times the PEL with a fullfacepiece or applicable government regulations.whichever is lower.
Time Use Limitation:
If respirator cartridge becomes damaged, soiled, orbreathing becomes difficult, leave the contaminatedarea and dispose of the respirator cartridge. If used inenvironments containing only oil aerosols, dispose ofrespirator cartridge after 40 hours of use or 30 days,whichever is first.
Ordering Information:
• Durability. Unique flexible filter material enables theproduct to be worn in close quarters. Its ruggedconstruction resists abrasion and wetting.
• Economy. The 2078, excellent for nuisance levelodors, is priced considerably lower than filter/cartridgecombinations.
Suggested Applications
• Utilities operations• Chemical manufacturing• Welding• Torch cutting• Brazing• Soldering• Aluminum smelting
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton. flour, and certain other substances.
• Liquid or oil based particles from sprays that do notalso emit harmful vapors.
• Metal fumes produced from welding, brazing, cuttingand other operations involving heating of metals.
• Gases such as Sulfur Dioxide, Hydrogen Fluorideand/or Chlorine below the OSHA PEL. or applicablegovernment standards, whichever is lower. Organicvapors below the OSHA PEL, or applicablegovernment regulations, whichever is lower.
Do Not Use For:
Gases and vapors when concentrations exceed theOSHA PEL, or applicable government standards,whichever is lower. including those present in paintspray operations, unless combined with approvedchemical cartridges. Asbestos. Sandblasting. Thisrespirator filter does not supply oxygen. Concentrationsthat exceed 10 time the OSHA PEL. with a halffacepiece or 50 times the PEL with a full facepiece orapplicable government regulations. whichever is lower.
Time Use Limitation:
If filter becomes damaged, soiled. or breathingbecomes difficult, leave the contaminated area anddispose of the filter. If used in environments containingonly oil aerosols, dispose of filter after 40 hours of useor 30 days, whichever is fast.
Ordering Information:
2078 P95ParticulateFilter withNuisanceLevel AcidGas andOrganicVapor Relief
The 3M 2078 P95Particulate Filter with3M Advanced Electret Media technology has beendeveloped with your respiratory needs in mind.
The 2078 provides you and your workers:
• Comfort. 3M’s advanced filter technology provides alightweight, easy breathing combination not found infiberglass containing filters.
• Versatile protection. The 2078 is well suited for awide range of oil and non-oil based particulatecontaminants, as well as certain nuisance-levelorganic vapors and acid gases.
• Simplicity. The versatility of this filter reduces yourinventory and training requirements. The designmakes the product easy for workers to use.
• Compatibility. The 2078 can be used with 3M’s widevariety of half and full facepieces.
2078
027-2078
Filters Per Bag: 2
Filters Per Case: 100
027-2076HF
Cartridges Per Bag: 2
Cartridges Per Case: 100
3M Particulate Filters
C18
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 18
2096 P100ParticulateFilter withNuisanceLevel AcidGas ReliefThe 3M 2096 P100Particulate Filter hasbeen developed withyour respiratoryneeds in mind.Specially designedcarbon layers remove nuisance levels of acid gases.
The 2096 provides you and your workers:
• Comfort. 3M’s Advanced Electret Media (AEM)provides a lightweight, easy breathing combination notfound in fiberglass containing filters.
• Versatile protection. The 2096 is well suited for awide range of oil and non-oil based particulatecontaminants. Ideal for utility operations, chemicalmanufacturing, aluminum smelting, welding, or as aprefilter for certain chemical exposures.
• Simplicity. The versatility of this filter reduces yourinventory and training requirements.
• Compatibility. The 2096 can be used with 3M’s widevariety of half and full facepiece designs.
• Exceptional filter efficiency. Passing NIOSH’s P-series test criteria, the 2096 P100 filter provides aminimum 99.97% filter efficiency.
• Durability. The unique flexible filter material resistsabrasion and wetting.
2091 P100ParticulateFilterThe 3M 2091 P100Particulate Filter hasbeen developed withyour respiratoryneeds in mind.
The 2091 providesyou and yourworkers:
• Comfort. 3M’sAdvanced ElectretMedia (AEM) provides a lightweight, easy breathingcombination not found in fiberglass containing filters.
• Versatile protection. The 2091 is well suited for awide range of oil and non-oil based particulatecontaminants. Ideal for welding, metal pouring, torchcutting, abatement or as a prefilter for certainchemical exposures.
• Simplicity. The versatility of this filter reduces yourinventory and training requirements.
• Compatibility. The 2091 can be used with 3M’s widevariety of half and full facepiece designs.
• Exceptional filter efficiency. Passing NIOSH’s P-series test criteria, the 2091 P100 filter provides aminimum 99.97% filter efficiency.
• Durability. The unique flexible filter material resistsabrasion and wetting.
• Economy. The 2091 is priced competitively with otherfilters in its class.
Suggested Applications
• Welding• Brazing• Torch cutting• Metal pouring• Soldering• OSHA substance specific particle exposures:
— Lead— Asbestos— Cadmium— Arsenic— 4,4’— Methylenedianiline (MDA)
• Pharmaceutical manufacturing
Use For:
• Solid such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays that do notalso emit harmful vapors.
• Metal fumes produced from welding, brazing, cuttingand other operations involving heating of metals.
• Radioactive particulate materials such as uranium andplutonium.
• Asbestos.
Do Not Use For:
Gases and vapors, including those present in paintspray operations, unless combined with approvedchemical cartridges. Sandblasting. Aerosolconcentrations that exceed 10 times the OSHA PEL,with half facepiece, or 50 times the PEL with fullfacepiece: or applicable government regulations,whichever is lower. This respirator filter does not supplyoxygen.
Time Use Limitation:
If filter becomes damaged, soiled. or breathingbecomes difficult, leave the contaminated area anddispose of the filter. If used in environments containingonly oil aerosols, dispose of filter after 40 hours of useor 30 days, whichever is first.
Ordering Information:
2096
2091
027-2071
Filters Per Box: 2
Filters Per Case: 100
3M Particulate Filters
C19
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 19
2097 P100ParticulateFilter withNuisanceLevelOrganicVapor ReliefThe 3M 2097 P100Particulate Filter hasbeen developed withyour respiratoryneeds in mind.Specially designed carbon layers remove nuisancelevels of organic vapors.
The 2097 provides you and your workers:
• Comfort. 3M’s Advanced Electret Media (AEM)provides a lightweight, easy breathing combinationnot found in fiberglass containing filters.
• Versatile protection. The 2097 is well suited for awide range of oil and non-oil based particulatecontaminants. Ideal for welding, metal pouring, torchcutting, abatement or as a prefilter for certainchemical exposures.
• Simplicity. The versatility of this filter reduces, yourinventory and training requirements.
• Compatibility. The 2097 can be used with 3M’s widevariety of half and full facepiece designs
• Exceptional filter efficiency. Passing NIOSH’s P-series test criteria, the 2097 P100 filter provides aminimum 99.97% filter efficiency.
Suggested Applications
• Chemical manufacturing• Undercoating• Welding• Brazing• Soldering• Torch cutting• Metal pouring• OSHA substance specific particle exposures:
— Lead— Asbestos— Cadmium— Arsenic— 4,4, — Methylenedianiline (MDA)
• Pharmaceutical manufacturing
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays tat do notalso emit harmful vapors.
• Metal fumes produced from welding, brazing, cuttingand other operations involving heating of metals.
• Radioactive particulate materials such as uranium andplutonium.
• Asbestos.
Suggested Applications
• Utility operations• Chemical manufacturing• Aluminum smelting• OSHA substance specific particle exposures:
— Lead abatement— Asbestos— Cadmium— Arsenic— 4,4,— Methylenedianiline (MDA)
• Pharmaceutical manufacturing• Welding• Brazing• Soldering• Torch cutting• Metal pouring
Use For:
• Solids such as those from processing minerals, coal,iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays tat do notalso emit harmful vapors.
• Metal fumes produced from welding brazing, cuttingand other operations involving heating of metals.
• Radioactive particulate materials such as uranium andplutonium.
• Asbestos.• Acid gases such as Sulfur Dioxide, Hydrogen Fluoride
and/or Chlorine below the OSHA PEL or applicablegovernment standards, whichever is lower.
Do Not Use For:
Gases and vapors above the OSHA PEL, includingthose present in paint spraying operations, unlesscombined with approved chemical cartridges.Sandblasting. This respirator filter does not supplyoxygen. Aerosol concentrations that exceed 10 timesthe OSHA PEL with a half facepiece or 50 times thePEL with a full facepiece; or applicable governmentregulations, whichever is lower.
Time Use Limitation:
If filter becomes damaged, soiled. or breathingbecomes difficult, leave the contaminated area anddispose of the filter. If used in environments containingonly oil aerosols, dispose of filter after 40 hours of useor 30 days, whichever is first.
Ordering Information:
027-2096
Filters Per Bag: 2
Filters Per Case: 100
3M Particulate Filters
C20
FINAL CATALOGUE #2 10/18/07 9:43 AM Page 20
• Organic vapors below the OSHA PEL or applicablegovernment standards, whichever is lower. 3Mrecommended for ozone protection up to 10 times theOSHA PEL.
Do Not Use For:
Gases and vapors above the OSHA PEL, includingthose present in paint spraying operations, unlesscombined with approved chemical cartridges.Sandblasting. Aerosol concentrations that exceed 10time the OSHA PEL, with a half facepiece, or 50 timesthe PEL with a full facepiece or applicable governmentregulations. whichever is lower. This respirator filter doesnot supply oxygen.
Time Use Limitation:
If filter becomes damaged, soiled, or breathingbecomes difficult, leave the contaminated area anddispose of the filter. If used in environments containingonly oil aerosols, dispose of filter after 40 hours of useor 30 days, whichever is first.
Ordering Information:
5N11 and7N11 N95ParticulateFiltersThe 5N11 and the7N11 N95 particulatefilters are NIOSHcertified and offerparticulate protectionagainst certain non-oilcontaining aerosols.Both the 5N11 and7N11 provide aminimum filterefficiency of 95 %.
5N11 N95 Filter
For use on 3M 5000Series Respiratorsand 6000 SeriesCartridges with 501Prefilter Retainer.
7N11 N95 Filter
For use on 3M 7000Series Cartridges with7287 CartridgeRetainer and N95Prefilter. Also for use as N95 stand-alone particulatefilter with 7289 Filter Retainer.
Protection and Performance
• Advanced filter construction reduces linting, helping toensure exacting results during painting and refinishingoperations.
• Meets NIOSH 42 CFR 84 N95 requirements.• Filter design helps prevent rapid clogging from non-oil
paint aerosols.
Comfort and Versatility
• Low-profile and light-weight design for improvedcomfort and worker acceptance.
• The 5N11 and 7N11 filters can be used with anassortment of facepieces, both in half facepiece andfull facepiece configurations.
Use For:
Solids and non-oil based particles including paint sprays(with appropriate cartridges).
Do Not Use For:
Oil containing aerosols.
Ordering Information:
5N11
501
027-2097
Filters Per Bag: 2
Filters Per Case: 100
027-5N11
Filters Per Box: 10
Filters Per Case: 100
3M Particulate Filters
C21
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 21
7093 P100ParticulateFilterThe 3M 7093 P100Particulate Filter helpsprovide workers with theprotection they needfrom certain harmfulparticles, while offeringthem comfort, versatilityand simplicity.
Features/Benefits
• Meets NIOSH 42
CFR 84 P100 requirements.
• Protection. Helps provide protection against certain dusts,fumes, mists, radionuclides, and asbestos-containing dustsand mists.
• Versatility. Can be used with a variety of facepieces, bothin half face and full face configurations. The 7093 filter iscompatible with the 3M 6000 Series Half Mask Facepiece,the 3M 7000 Series Half Mask Facepiece with bayonetattachments and the 3M 7800 Full Facepiece equipped with701 adapters.
• Comfort. Low profile. compact design helps provideworkers with an improved field of vision. It is lightweight forenhanced comfort, longer wear and better acceptance.
Ordering Information:
5P71 P95ParticulateFilterThe 3M 5P71 P95Particulate Filter offerssimplicity and ease ofuse while helping toprovide reliableworker protectionagainst certain oil andnon-oil containingaerosols. It passesNIOSH testing criteriaproviding a minimum filter efficiency of 95%.
For use on 3M 5000 Series Respirators and 6000Series Cartridges with 501 Prefilter Retainer.
• Meets NIOSH 42 CFR 84 P95 requirements.• P-series filter features Advanced Electret Media (AEM),
appropriate for both oil and non-oil containingenvironments with extended time-use limitations.
• Comfort and versatility.Advanced electrostatically charged microfibers allowfor a low-profile design and easier breathing filter.The 5P71 filters can be used with the 5000, 6000 and7000 series in both half facepiece and full facepiececonfigurations.
Suggested Applications
• Spray painting• Lacquering• Petrochemical manufacturing• Chemical manufacturing• Paper processing• Boat manufacturing• Lab settings• Pesticide spraying Agriculture
Use For:
• Oil and non-oil based particles including paint spraysand pesticides (with appropriate gas and vaporcartridges).
Do Not Use For:
• Asbestos, lead, cadmium, arsenic or sandblasting.• Do not use above maximum use limitations
established by OSHA or applicable governmentstandards.
Ordering Information:
5P71 7093
027-5P71
Filters Per Box: 10
Filters Per Case: 100
027-7093
Filters Per Box: 10
Filters Per Case: 100
3M Particulate Filters
C22
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 22
3M Series 7800 Full Facepiece
Half and Full Facepiece
Respirators 7000 SeriesInterchangeable cartridges/filters for optimum protection
3M Half and Full Facepiece Respirators 7000 Seriesare designed to accommodate a wide variety ofcartridges. filters and combinations. These aredurable and proven respirators that can be used inmany applications and provide maximum comfort,versatility and reliability.
Features/Benefits
• The half and full facepieces are each available in 3 sizes (small. medium, large) to comfortably fitmany faces.
• Low-profile design of the facepiece andcartridges/filters improves visibility
• Half facepieces are available in rubber or silicone.• Half facepieces have a four-point strap attachment
with convenient front-strap adjustment.• N95, P95 or P100 filters can be used in
combination with extra large inhalation andexhalation valves for easier breathing.
• The full facepiece has double-flange face seal andsix adjustable straps to help provide a secure fit.
• The full facepiece is available as an air purifyingrespirator or with a variety of positive pressureassemblies.
7000 Series Facepieces with Bayonet Attachment
(All filters, cartridges and retainers are sold separately)
Filters and Accessories which can be used with7000 Series Respirators with BayonetAttachment
3M Series 7000+ Half Facepiece
2071
2076HF
2078
2091
2096
2097
Half Facepieces7001 Small
7002 Medium
7003 Large
Full Facepieces7800S Small
7800M Medium
7800L Large
2071 P95 Filter
2076HF P95 Filter with hydrogen fluoride,nuisance level acid gas relief
2078 P95 Filter with nuisance level organicvapor and acid gas relief
2091 P100 Filter
2096 P100 Filter with nuisance level acidgas relief
2097 P100 Filter with nuisance levelorganic vapor relief
3M 7000 Series Respirators
C23
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 23
6000 Series Cartridges which can be used with7000 Series Full Facepieces
7000 Series Facepieces for use with 7000 Series Filters/Cartridges
5N11
5P71
501
502
6001
6002
6003
6004
6005
6006
6009
60921
60922
60923
60924
60925
60926
60929
7093
7093 P100 Filter
5N11 N95 Filter (use with 501 filter retainer)
5P71 P95 Filter (use with 501 filter retainer)
501 Filter Retainer
502 Filter Adapter
6001 Certain organic vapors
6002 Chlorine, hydrogen chloride, and sulfurdioxide or chlorine dioxide or hydrogensulfide (escape only)
6003 Certain organic vapors, chlorine, hydro-gen chloride and sulfur dioxide or hydro-gen sulfide (escape only) or hydrogenfluoride
6004 Ammonia and methylamine
6005 Formaldehyde and certain organicvapors
6006 Certain organic vapors, chlorine, hydro-gen chloride, chlorine dioxide, sulfurdioxide, hydrogen sulfide (escape only),ammonia/ methylamine, formaldehyde orhydrogen fluoride
6009 Mercury vapor or chlorine gas
60921 P100/Certain organic vapors
60922 P100/Chlorine, hydrogen chloride, andsulfur dioxide or chlorine dioxide orhydrogen sulfide (escape only)
60923 P100/Certain organic vapors, chlorine,hydrogen chloride, and sulfur dioxide orhydrogen sulfide (escape only) or hydro-gen fluoride
60924 P100/Ammonia and methylamine
60925 P100/Formaldehyde and certain organicvapors
60926 P100/Certain organic vapors, chlorine,hydrogen chloride, chlorine dioxide, sul-fur dioxide, hydrogen sulfide (escapeonly), ammonia/ methylamine, formalde-hyde or hydrogen fluoride
60929 P100/Mercury vapor or chlorine gas
Half Facepieces7100 Small (Rubber)
7200 Medium (Rubber)
7300 Large (Rubber)
7100S Small (Silicone)
7200S Medium (Silicone)
7300S Large (Silicone)
Full Facepieces7800S Small
7800M Medium
7800L Large
3M 7000 Series Respirators
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 24
3M 7000 Series Cartridges
(Cannot be used with 7001, 7002, 7003 halffacepieces)
7000 Series Filters and Retainers
3M 7800S Full Facepiece Replacement Parts
7251 Certain organic vapors
7252 Chlorine, hydrogen chloride, and sulfurdioxide or chlorine dioxide or hydrogensulfide (escape only)
7253 Certain organic vapors, chlorine,hydrogen chloride, and sulfur dioxideor hydrogen fluoride
7254 Ammonia and methylamine
7275 Formaldehyde or certain organic vapors
7276 Certain organic vapors, chlorine,hydrogen chloride, chlorine dioxide,sulfur dioxide, hydrogen sulfide(escape only) ammonia/methylamine,formaldehyde or hydrogen fluoride
7N11 N95 Filter(Can he used as stand-alone filter (with7289 retainer) or as filter with cartridge(with 7287 retainer).
7090 P100 Filter(Can be used as a stand-alone filter(with 7288 retainer) or as a filter withcartridge (with 7287 retainer).
7287 Cartridge Retainer (Use with 7000 Series Cartridges aloneor in combination with 7N11 and 7090Filters)
7288 Filter Retainer (Use with 7090 Filter)
7289 Filter Retainer (Use with 7N11 Filter)
701 Cartridge/Filter Adapter
6895 Inhalation Gasket
7282 Inhalation Valve
7283 Exhalation Valve
7881S Nose Cup Assembly/Silicone
7882 Nose Cup Valve Assembly
7883 Neck Strap Assembly
7884 Lens
7885 Lens Frame Kit
7886 Removable DIN Connector
7887 Inhalation Valve Gasket
7890 Full Face Plug
7891 Cartridge Holder
7893S Head Strap Assembly, Silicone
7894 Eyeglass Frame and Mount
7895 Speaking Diaphragm Kit
7899-25 Lens Cover (25 pack)
7899-100 Lens Cover (100 pack)
7914 Band Clamp
7915-5 Tyvek Shroud
7916-5 Breathing Room Assembly
7918 Exhalation Valve Cover
7925 Spectacle Kit
7931 Autodarkening Lens (Shade 9,10, 11, 12)
79813 Small Nose Cup Assembly/Silicone
7986 Tinted Lens Cover
7988 Welder’s Face Shield, Autodarkening
7989 Full Facepiece Button
7993 Welder’s Shroud
7994-5 Welder’s Face Shield Retainer Spring
7995-10 Welder’s Face Shield Chipping WindowGasket
7996-10 Welder’s Face Shield Gasket
7997-100 Welders Face Shield Chipping Window
7998 Welder’s Face Shield Kit
7999 Air Inlet Gasket
9891 Filter Holder with Gasket
3M 7000 Series Respirators
C25
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 25
Half and Full FacepieceRespirators 6000 Series
Unmatched performance and comfort3M Respirators 6000 Series provide low-maintenance and offer the user comfort andconvenience coupled with the cost savings of areusable respirator.
Features/Benefits
• Used with 3M Filters and Cartridges, theserespirators are among the lightest available.
• The swept back design of the cartridges improvesbalance and visibility.
• 6000 series facepieces cost about half as much astypical reusable respirators.
• Remarkably comfortable, soft, lightweightfacepiece and easy-to-adjust head straps.
• Reusable. Just dispose of the cartridges/filterswhen used to capacity.
• Can be disassembled, cleaned and reused• NIOSH approved for negative pressure air purifying
and positive pressure dual airline applications.• Supplied with reclosable storage bag.• The half and full facepieces are each available in 3
sizes (small. medium, large) to comfortably tit manyfaces.
The 6000 Series respirators can be used in dualairline mode:
• Available with both back mounted and front-mounted breathing tubes.
• Systems can be used in combination with theNIOSH 42 CFR 84 approved 3M 2000 SeriesFilters or 3M 6000 Series Cartridges and P100Filter/Cartridge.
• Cartridge/filter connections provide negative andpositive pressure capability in one respiratorassembly
• Can be used on both high and low pressuresystems.
• Wearer can disconnect and reconnect the airlinehose at the air regulator. When the hose isdisconnected. the system automatically changes tolitters/cartridges for negative pressure protection –then back to positive pressure protection with asimple reconnection of the airline.
• Small diameter breathing tubes are simple to workwith and easy to clean and decontaminate.
3M Series 6000 Full Facepiece
6700 Small 6800 Medium 6900 Large
3M Series 6000 Half Facepiece
6100 Small 6200 Medium 6300 Large
3M 6000 Series Respirators
C26
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 26
Half Facepieces
Full Facepieces
Filters and Accessories which can beused with the 6000 Series Face Masks
Cartridges which can be used with the6000 Series Face Masks
2071
2076HF
2078
2091
2096
2097
5N11
5P71
501
502
6001
6002
6003
6004
6005
6006
6009
60921
60922
609237093
6100 Half Facepiece (Small)
6200 Half Facepiece (Medium)
6300 Half Facepiece (Large)
6700 Full Facepiece (Small)
6800 Full Facepiece (Medium)
6900 Full Facepiece (Large)
2071 P95 Filter
2076HF P95 Filter with hydrogen fluoride, nuisance level acid gas relief
2078 P95 Filter with nuisance level organicvapor acid gas relief
2091 P100 Filter
2096 P100 Filter with nuisance level acidgas relief
2097 P100 Filter with nuisance level organicvapor relief
7093 P100 Filter
5N11 N95 Filter (Use with 501 FilterRetainer)
5P71 P95 Filter (Use with 501 FilterRetainer)
501 Filter Retainer
502 Filter Adapter (Use with 2071, 2091,7093 Filters)
6001 Certain organic vapors
6002 Chlorine, hydrogen chloride, and sulfur dioxide or chlorine dioxide orhydrogen sulfide (escape only)
6003 Certain organic vapors, chlorine,hydrogen chloride and sulfur dioxideor hydrogen sulfide (escape only) orhydrogen fluoride
6004 Ammonia and methylamine
6005 Formaldehyde and certain organicvapors
6006 Certain organic vapors, chlorine,hydrogen chloride, chlorine dioxide,sulfur dioxide, hydrogen sulfide(escape only), ammonia/methylamine,formaldehyde or hydrogen fluoride
6009 Mercury vapor or chlorine gas
60921 P100/Certain organic vapors
60922 P100/Chlorine, hydrogen chloride,and sulfur dioxide or chlorine dioxideor hydrogen sulfide (escape only)
60923 P100/Certain organic vapors, chlorine,hydrogen chloride, and sulfur dioxideor hydrogen sulfide (escape only) orhydrogen fluoride
3M 6000 Series Respirators
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 27
Full Facepiece Replacement Parts andAccessories for the 6000 Series
Half Facepiece Replacement Parts 6000 Series Replacement Parts
6000 Series Conversion Kits
To complete a 3M Dual Airline Respirator System, select afacepiece, an adapter kit and an air supply hose. For example: 6800 + SA-2000 + W-9435-l00 = complete system.
60924
60925
60926
60929
60924 P100/Ammonia and methylamine
60925 P100/Formaldehyde and certain organic vapors
60926 P100/Certain organic vapors, chlorine, hydrogenchloride, chlorine dioxide, sulfur dioxide, hydrogensulfide (escape only), ammonia/methylamine, formaldehyde or hydrogen fluoride
60929 P100/Mercury vapor or chlorine gas
Replacement Parts7883 Neck Strap Assembly
6889 Exhalation Valve
6892 Center Adapter Assembly
6893 Inhalation Valve
6894 Nose Cup Assembly
6895 Inhalation Gasket
6897 Head Harness Assembly
6898 Lens Assembly
6899 Lens Frame Kit
Accessories6878 Spectacle Kit
6885 Face Shield Cover
6886 Tinted Lens Cover
6893 Inhalation Valve
6889 Exhalation Valve
6895 Inhalation Gasket
Accessories and replacement partsSA-2000/SA-2000LPStandard Back-Mounted Adapter KitIncludes SA-2500 Breathing Tube, GVP-l27 Belt and SA-1009Air Regulator or SA-l029 Connector (low pressure)
SA-2100/SA-2100LPCombination Back-Mounted Adapter KitIncludes 2600 Breathing Tube, OVP-127 Bolt and SA-1009Regulator or SA-l 029 Connector (low pressure).Cartridges/Filters not included.
SA-1000/SA-1000LPStandard Front-Mounted Adapter KitIncludes SA-l500 Breathing Tube, GVP-l27 Belt, and SA-1009Regulator or SA-1029 Connector (low pressure)
SA-1100/SA-1100LPCombination Front-Mounted Adapter KitIncludes SA-1600 Breathing Tube, GVP-127 Belt, and SA-1009Regulator or SA-1029 Connector (low pressure).Cartridges/Filters not included.
3M 6000 Series Respirators
C28
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 28
Pre-Assembled for Convenience.Designed for Comfort.
3M Respirators 5000 Series are pre-assembled,have no spare parts and require no maintenance.They offer comfort, convenience and performance.
Features/Benefits
• Available in 3 sizes (small. medium, large) tocomfortably fit many faces.
• Resealable storage bag helps keep respirator cleanbetween uses.
• Low profile design provides wider field of visionand greater comfort while wearing goggles orglasses.
• Lightweight design coupled with cradle suspensionhelps relieve pressure on back of neck and bridgeof nose.
• Can be combined with NlOSH P95 and P100filters for oil and non-oil particles.
• For convenience and simplicity some respirators airpackaged with either 3M Filters P95 or P100 alongwith the 3M Filter Retainers 501 or due 3M FilterAdapters 502.
3M 5000 Series Respirators
Half Facepiece Respirators 5000 Series
Product Number NIOSH Approval
5101 Certain organic vapors
(Small)
5201
(Medium)
5301
(Large)
5102 Chlorine, hydrogen chloride,
(Small) and sulfurdioxide or chlorine
5202 dioxide or hydrogen
(Medium) sulfide (escape only)
5302
(Large)
5103 Certain organic
(Small) vapors, chlorine
5203 hydrogen chloride, and sulfur
(Medium) dioxide or hydrogen sulfide
5303 (escape only) or
(Large) hydrogen fluoride
5104 Ammonia and methylamine
(Small)
5204
(Medium)
5304
(Large)
51P71
5301
5303
3M 5000 Series Respirators
C29
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 29
Filters and Accessories which can be used withthe 5000 Series Facepieces
3M 5000 Series Respirator Packout Assemblies
52P71
52911
52913
501 5N11
5105 Formaldehyde and (Small) certain organic vapors5205(Medium)5305(Large)
5106 Certain organic vapors, (Small) chlorine,hydrogen chloride, 5206 chlorine dioxide, sulfur (Medium) dioxide, hydrogen sulfide5306 (escape only) ammonia/ (Large) methylamine, formaldehyde
or hydrogen fluoride
Product Number NIOSH Approval
51P71 P95/Certain organic vapors(Small)52P71(Medium)53P71(Large)
51911 P100/Certain organic vapors(Small)52911(Medium)53911(Large)
51913 P100/Certain organic vapors, (Small)chlorine, hydrogen chloride,
52913 and sulfur dioxide or (Medium) hydrogen sulfide (escape 53913 only) or hydrogen fluoride(Large)
51916 P100/Certain organic vapors, (Small) chlorine, hydrogen chloride, 52916 chlorine dioxide, sulfur (Medium) dioxide, hydrogen sulfide 53916 (escape only), ammonia/(Large) methylamine, formaldehyde
or hydrogen fluoride
2071 P95 Filter2091 P100 Filter7093 P100 Filter5N11 N95 Filter (Use with the 501 Filter
Retainer)5P71 P95 Filter (Use with the 501 Filter
Retainer)501 Filter Retainer502 Filter Adapter (Use with the 2071,
2091 and 7093 Filters)
3M 5000 Series Respirators
C30
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 30
522-01-11R03
(Regular)522-02-17R03
(Large)
Headgear
Breathing Tube
HEPAPAPR Assembly
BatteryCharger
522-02-00R03
(Regular, White)522-02-01R03
(Large, White)
522-02-02R03
(Regular, Blue)522-02-03R03
(Large, Blue)
008-00-14R01
231-01-30
520-01-61
(Ten BatteryUnit)
520-01-61SGL
(Single BatteryUnit)
520-01-61FIV
(Five BatteryUnit)
231-01-30 Includes
• Air Filter Unit 520-03-63R01• Battery Pack 007-00-15R01• HEPA Filter 451-02-01R01
• Nylon Belt 021-41-02R01• Airflow Indicator 021-14-00R01
3M Air-Mate HEPA PAPR Systems Matrix
C31
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 31
520-01-83R01
(White)520-02-28R01
(Black)
520-01-84R01 520-02-22R01 522-01-11R03
(Regular)522-02-17R03
(Large)
522-02-23R01 522-02-00R03
(Regular, White)522-02-01R03
(Large, White)522-02-02R03
(Regular, Blue)522-02-03R03
(Large, Blue)
055-00-01R01
Headgear
Breathing Tube
Turbo PAPR Assembly
Canisters/Cartridges/Filters
Battery Charger
BE 1
General
Purpose Helmet
BE 17
Welding
Helmet
BE 5
Vinyl
Hood
BE 10
Tyvek® QC
Hood
BE 10
Butyl Rubber
Hood
BE 12
Tyvek® QC
Head Cover
BE 7
Full
Facepiece
526-01-13R01
(Standard, 17.5 in.)526-01-10R01
(Optional, 14 in.)
520-01-41R01
(Standard, 20 in.)520-01-03R01
(Optional, 14 in.)
520-01-00R01
(Standard, 36 in.)520-02-94R01
(Optional, 26 in.)
520-03-32R01
(Standard, 33 in.)520-01-80R01
(Optional, 25 in.)
520-01-77
(Standard, 34 in.)
OV (A) ................456-00-01R06/R20OV (A) ................456-00-07R06/R20 (canister)*OV/AG (AE)........456-03-01R06/R20AG/FORM (E) ....456-02-01R06/R20AG (E) ................456-02-07R06/R20 (canister)*AMM (K) ............456-01-01R06/R20AMM (K) ............456-01-07R06/R20 (canister)*HEPA (P3) ..........450-00-01R12/R30
520-17-00 Includes
• Motor Blower 022-00-03R01• Battery Pack (Blue) 520-01-17R01• Belt 520-02-90R01• Flow Meter 520-01-21
520-15-00 Includes
• Motor Blower 022-00-03R01• Battery Pack (Black) 520-01-15R01• Belt 520-02-90R01• Flow Meter 520-01-21
520-01-61SGL
(Single BatteryUnit)
520-01-61FIV
(Five BatteryUnit)
520-01-61
(Ten BatteryUnit)
OV/HEPA (AP3) ..............453-00-01R06/R20OV/AG/HEPA (AEP3) ....453-03-01R06/R20HF/SO2/OV/HEPA (ALP3) .....453-07-01R06/R20FORM/HEPA (EP3) ........453-01-01R06/R20AMM/HEPA (KP3) ..........453-02-01R06/R20
* For Breathe Easy 7 Full Facepiece only.
520-17-00
(Turbo PAPR Assembly, Intrinsically Safe)520-15-00
(Turbo PAPR Assembly)
3M Breathe Easy PAPR Systems Matrix
C32
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 32
Headgear
BreathingTube
Air ControlDevice
Canisters/Cartridges/Filters
GVP-127Waist Belt
GVP-110Power Cord
GVP-111Battery Pack
GVP-137Optional Comfort Belt
(not part of GVP-1)available in sizes
S, M, L, XL, XXL
GVP-123GVP-122
GVP-100
Motor Blower
H-400 Series
Tyvek® QC
H-600 Series
Tychem SL
with sealed seams
H-800 Series
Flame retardent
outer fabric
H-900 Series
Grinding Hood
7800S
Facepiece
7890 Port Plug W-3241 HalfFacepieceAirlineConversionKit
7X00 Series
Facepiece
GVP-128Optional Web ShoulderStrap (not part of GVP-1)
GVP-112Battery Charger
GVP-113Flow Meter
GVP-401: Organic VapourGVP-402: Acid GasGVP-403: Organic Vapour/Acid GasGVP-404: AmmoniaGVP-405: FormaldehydeGVP-440: HEPA
GVP-441: Organic Vapour/HEPAGVP-442: Acid Gas/HEPAGVP-443: Organic Vapour/Acid Gas/HEPAGVP-444: Ammonia/HEPAGVP-445: Formaldehyde/HEPA
GVP-1also available
GVP-CB(Comfort belt instead
of GVP-127 belt)
H-115
H-200 Series
Tyvek® QC
3M Belt Mounted PAPR Systems Matrix
C33
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 33
520-01-83R01 520-01-84R01 522-01-11R03
(Regular)522-02-17R03
(Large)
055-00-01R01
Headgear
Breathing Tube
Air ControlDevice
SuppliedAirHose
PurificationPanel
General
Purpose
Helmet
Welding
Helmet
Tyvek® QC
Hood
Full
Facepiece
520-01-08R01
(14 in.)520-01-60R01
(36 in.)520-01-01R01
(17.5 in.)
529-01-22R01
(Coldstream)529-01-24R01
(Vorstream)520-01-27R01
(Flowstream)
526-01-21R01
(25 ft.)526-01-11R01
(50 ft.)526-01-06R01
(100 ft.)
526-01-00
(25 ft.)526-01-09
(50 ft.)526-01-07
(100 ft.)
256-02-00 (4 outlets)
50 cfm(Portable with CO Monitor
and CO Filtration)
256-02-01 (8 outlets)
100 cfm(Portable with CO Monitor,
without CO Filtration)
W-2806 (3 outlets)
50 cfmPanel Mount
(Particulate filter with removalof nuisance level hydrocarbons)
256-02-02 (8 outlets)
100 cfm(Portable without CO
Monitor and CO Filtration)
For maximum hose length,see table of air flow deliveryon last page.
3M Supplied Air Systems Matrix
C34
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 34
Headgear
Air ControlDevice
BreathingTube
SuppliedAirHose
PurificationPanels
W-2929(High Pressure Hose)
W-3020(Low Pressure Hose)
W-9435(High Pressure Hose)
H-400 SeriesTyvek® QC
H-600 SeriesTychem SL
with sealed seams
H-800 SeriesFlame retardent
outer fabric
H-900 Series
Grinding Hood
W-2907*(Air Regulating
Assembly)
W-2862*(Vortex Cooling
Assembly)
W-2863*(Vortemp™ Heating
Assembly)
W-3018(Low Pressure
Adapter)
*Also available with stainless steel fittings. (When ordering, add SS to Product Number e.g. W-2862SS)
W-5114
256-02-00 (4 outlets)50 cfm
(Portable with CO Monitor& CO Filtration)
256-02-01 (8 outlets)100 cfm
(Portable with CO Monitor& without CO Filtration)
W-2806 (3 outlets)50 cfm
Panel Mount(Particulate filter with removal
of nuisance level hydrocarbons)
256-02-02 (8 outlets)100 cfm
(Portable without COMonitor and CO Filtration)
For maximum hoselength, see table ofair flow deliveryon last page.
3M H Series Supplied Air Systems Matrix
C35
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 35
Headgear
BreathingTube
Air ControlDevice
SuppliedAirHose
PurificationPanel
W-8100Abrasive Blasting
W-8000General Purpose
W-8200BWelding
W-9435*(High Pressure
Hose)
W-3020(Low Pressure
Hose)
W-8003
W-2907*(Air Regulating
Assembly)
W-2862*(Vortex Cooling
Assembly)
W-2863*(Vortemp™ Heating
Assembly)
W-3018(Low Pressure
Adapter)
*Also available with stainless steel fittings. (When ordering, add SS to Product Number e.g. W-2862SS)
W-2929*(High Pressure
Hose)
Note: Helmet/hood, breathing tube, air control valve and compressed air supply hose are required parts in a NIOSH/MSHA approved system. Any NIOSH/MSHA certification appearing on 3M components is strictly limited to use in an approved air system and only in full accordance with the specifications and limitations under said approval. NIOSH certifies complete assemblies only, not sub-assemblies
256-02-00 (4 outlets)50 cfm
(Portable with CO Monitorand CO Filtration)
256-02-01 (8 outlets)100 cfm
(Portable with CO Monitor,without CO Filtration)
W-2806 (3 outlets)50 cfm
Panel Mount(Particulate filter with removal
of nuisance level hydrocarbons)
256-02-02 (8 outlets)100 cfm
(Portable without COMonitor and CO Filtration)
For maximumhose length, seetable of air flowdelivery onlast page.
3M Supplied Air Systems Helmets Matrix
C36
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 36
50 cfmPanel Mount
(Particulate filter with removalof nuisance level hydrocarbons)
100 cfm(Portable without CO
Monitor and CO Filtration)
Headgear
BreathingTube
Air ControlAssemblies
AirSupplyHoses
PurificationPanels
7800S(Full Facepiece)
6000 Series(Half Facepiece)
7000x (Half Facepiece)
(with bayonet attachments)
* Also available with stainless steel fittings. (When ordering, add SS to Product Number, e.g. SA-1007SS)
For maximumhose length, seetable of air flowdelivery onlast page.
SA-1500(Front Mount Breathing Tube)
SA-2500*(Back Mount Breathing Tube)
SA-1600(Supplied Air and Cartridge
Combination Breathing TubeFront Mount)
SA-2600(Supplied Air and Cartridge
Combination Breathing TubeBack Mount)
SA-1007*(Air Regulator
Assembly)
SA-1027(Low Pressure
Connector Assembly)
W-9435*(3/8” I.D.)
(High Pressure Hose)
W-3020(1/2” I.D.)
(Low Pressure Hose)
6000 (Full Facepiece)
Back-MountedAdapter Kits
SA-2000 (High Pressure)SA-2000LP (Low Pressure)
Combination Back-Mounted Adapter KitsSA-2100 (High Pressure)
SA-2100LP (Low Pressure)
Front-MountedAdapter Kits
SA-1000 (High Pressure)SA-1000LP (Low Pressure)
Combination Front-Mounted Adapter KitsSA-1100 (High Pressure)
SA-1100LP (Low Pressure)
256-02-00 (4 outlets)50 cfm
(Portable with CO Monitorand CO Filtration)
256-02-01 (8 outlets)100 cfm
(Portable with CO Monitor,without CO Filtration)
W-2806 (3 outlets) 256-02-02 (8 outlets)
ADAPTER KITS
STANDARD KITS COMBINATION KITS
3M Dual Airline Respirators Systems Matrix
C37
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 37
Headgear
PressureDemand Valve(includes Breathing Tube
and Belt Clip assembly))
ShoulderStrap
WaistBelt
PortPlug
Two PositionExhalation ValveAssembly
PressureDemandAdapter
CompressedAir Hose
7800SFull Facepiece
W-3232
W-3229
W-3237*
W-3217
7890
W-3231
W-3242-25
W-3242-50
W-3242-100(comes with mediumsize silicone facepiece)
W-3238
W-9435(High Pressure Hose)
3M Pressure Demand Systems Matrix
C38
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 38
50 cfmPanel Mount
(Particulate filter with removalof nuisance level hydrocarbons)
100 cfm(Portable without CO
Monitor and CO Filtration)
Headgear
Air ControlKits
AirSupplyHoses
PurificationPanels
7800S(Full Facepiece)
available in S, M, L
7998 (for passive lens)or
7988 (for electronic lens)Welder’s Face Shield Kit
7X00 Series (Half Facepiece)
W-3196Air Regulator Kit.
For use with W-9435 3/8” ID hose.Includes 1 each of the following:
For continuous flow applications using supply pressure of 10 to36 psi and W-9435 1/2” ID hose
For low pressure continuousflow tight fitting check valveairline applications
For continuous flow applicationsusing supply pressure of 7 to18 psi and W-3020 1/2” hose
• W-3187 adapter assembly• W-3188 breathing tube• W-3194 low pressure connector• W-3217 waist belt• W-3229 shoulder strap• 7890 plug for facepiece port
W-3497Low Pressure Adapter Kit
Includes 1 each of the following:• 7890 plug for facepiece port• W-2963 waist belt• W-3032CV 1/2” connector• W-3264 breathing tube
W-3197Low Pressure Air Regulating Kit
For use with W-3032 1/2” ID hose.Includes 1 each of the following:
• W-3187 adapter assembly• W-3188 breathing tube• W-3195 low pressure connector• W-3217 waist belt• W-3229 shoulder strap• 7890 plug for facepiece port
* Also available with stainless steel fittings. (When ordering, add SS to Product Number, e.g. SA-2500SS)
For maximumhose length,see table of airflow delivery onlast page.
W-3241Half Facepiece Airline
Conversion Kit
256-02-00 (4 outlets)
W-9435*3/8” High Pressure Hose
Available in 25’, 50’ 100’ lengths
W-29293/8” High Pressure Coiled Hose
W-30201/2” Low Pressure Hose
Available in 25’, 50’ 100’ lengths
50 cfm(Portable with CO Monitor
and CO Filtration)
256-02-01 (8 outlets)100 cfm
(Portable with CO Monitor,without CO Filtration)
W-2806 (3 outlets) 256-02-02 (8 outlets)
3M Low Pressure Systems, Continuous Flow
C39
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 39
50 cfmPanel Mount
(Particulate filter with removalof nuisance level hydrocarbons)
100 cfm(Portable without CO
Monitor and CO Filtration)
Headgear
Air ControlKits
AirSupplyHoses
PurificationPanels
7800S(Full Facepiece)
available in S, M, L
7998 (for passive lens)or
7988 (for electronic lens)Welder’s Face Shield Kit
7X00 Series (Half Facepiece)
W-3061Air Regulating Assembly
Includes 1 each of the following:
For continuous flow tight fittingor 7000 Series applications
For continuous flow tight fittingcheck valve airline applications
• W-3062 air regulating valve• W-3187 adapter• W-3188 breathing tube• W-3217 waist belt• W-3229 shoulder strap• 7980 plug for facepiece port
W-3461High Pressure Air Regulator Kit
Includes 1 each of the following:• W-2909CV air regulator valve• W-2963 waist belt• W-3264 breathing tube• 7890 plug for facepiece port
* Also available with stainless steel fittings. (When ordering, add SS to Product Number, e.g. SA-2500SS)
For maximum hoselength, see table ofair flow delivery onlast page.
W-3241Half Facepiece Airline
Conversion Kit
256-02-00 (4 outlets)
W-9435*1/2” High Pressure Hose
W-29293/8” High Pressure Coiled Hose
50 cfm(Portable with CO Monitor
and CO Filtration)
256-02-01 (8 outlets)100 cfm
(Portable with CO Monitor,without CO Filtration)
W-2806 (3 outlets) 256-02-02 (8 outlets)
3M High Pressure Systems, Continuous Flow
C40
FINAL CATALOGUE #2 10/18/07 9:46 AM Page 40
North: Respirators
& ACCESSORIES
PARTICULATE FILTERS
Particulate Filters
Part# Description
7580P100 P100 Particulate Filter – (99.97% Minimum Filter Efficiency)
75FFP100 P100 Particulate Filter (Pancake) – (99.97% Minimum Filter Efficiency)
7506N95 N95 Non-Oil Particulate Filter (95% Minimum Filter Efficiency)
7506N99 N99 Non-Oil Particulate Filter (99% Minimum Filter Efficiency)
7506R95 R95 Particulate Filter (95% Minimum Filter Efficiency)
7531N95 N95 Non-Oil Particulate Filter Assembly (95% Minimum Filter Efficiency)Includes 7506N95 Filter, N750027 Seal Check / Filter Cover and N750015 Filter Holder
7531N99 N99 Non-Oil Particulate Filter Assembly (99% Minimum Filter Efficiency) Includes 7506N99 Filter, N750027 Seal Check / Filter Cover and N750015Filter Holder
7531R95 R95 Particulate Filter Assembly (95% Minimum Filter Efficiency)Includes 7506R95 Filter, N750027 Seal Check / Filter Cover and N750015Filter Holder
Air Purifying Respirators with filters provide respiratory protection against aerosols by removing dusts, mists, fumes,fibers, and other particles. Filters do not remove gases or vapors, or correct for oxygen deficiency.
End of service life for filters is normally determined by the increase in breathing resistance sensed by the user. Whenit becomes difficult to breathe comfortably, the filters should be replaced. R95 filters are limited to a maximum of 8hours use, when used in atmospheres containing oil.
Accessories for Cartridges and Filters
Part# Description
N750015 Filter Holder for 7506N95, 7506N99 and 7506R95 filters. Requires N750027 Seal Check / Filter Cover.
N750027 Seal Check / Filter Cover for 7506N95, 7506N99 and 7506R95 filters. Attaches to Gas and Vapor cartridges. For filter use only, use N750015 Filter Holder.
N750029 Shower Cap for 7580P100 Filter. Protects filter during abatement using water or during decontamination.
N750035 Adapter for assembly of a 75FFP100 Pancake Filter to a gas and vapor cartridge (Except for Defender Multi-Purpose Cartridge)
C41
FINAL CATALOGUE #2 10/18/07 11:58 AM Page 41
North: Respirators
C42
GAS & VAPOR CARTRIDGES
North offers an extensive line of gas and vapor cartridges and particulate filters to satisfy numerous industrial applications. All North car-tridges and filters are approved with all North air-purifying half masks and full facepiece respirators. One line of cartridges and filters willsimplify your inventory.
Air-Purifying Respirators with cartridges provide respiratory protection against gases and vapors by using sorbents to purify the inhaledair. Cartridges without filters do not remove dusts, fibers, and other particles.
End of service life for gas and vapor cartridges is determined by either:
• an end-of-service-life indicator (ESLI) certified by NIOSH, or
• the employer must implement a change schedule to ensure cartridges are changed before the end of their service life.
North Safety Products has developed cartridges with a REAL-TIME ESLI™ for Ammonia, Hydrogen Chloride, Hydrogen Fluoride, SulfurDioxide and Hydrogen Sulfide. Where an ESLI does not exist, North has developed the ezGuide™ software program designed to help theuser develop change schedules for North gas and vapor cartridges. ezGuide will also determine the appropriate types of respiratory andhand protection required. See page 33 for more information.
Gas & Vapor Cartridges and Combination Gas and Vapor Cartridges with P100 Particulate Filters
Part# Color Code Description
75SC Olive Defender™ Multi-Purpose Cartridge for Organic Vapors, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape) Hydrogen Fluoride, Chlorine Dioxide, Ammonia, Methylamine and Formaldehyde
75SCP100 Olive / Magenta Above with P100 Particulate Filter (99.97% Minimum Filter Efficiency)
N75001 Black Organic Vapor Cartridge
7581P100 Black / Magenta Above with P100 Particulate Filter (99.97% Minimum Filter Efficiency)
N75002 White Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride, Chlorine Dioxide, Formaldehyde Cartridge
7582P100 White / Magenta Above with P100 Particulate Filter (99.97% Minimum Filter Efficiency)
N75003 Yellow Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride, Chlorine Dioxide Cartridge
7583P100 Yellow / Magenta Above with P100 Particulate Filter (99.97% Minimum Filter Efficiency)
N75004 Green Ammonia, Methylamine Cartridge
7584P100 Green / Magenta Above with P100 Particulate Filter (99.97% Minimum Filter Efficiency)
N750052 Olive Mercury Vapor, Chlorine Cartridge with End-of Service-Life Indicator (ESLI for mercury vapor)
75852P100 Olive / Magenta Above with P100 Particulate Filter (99.97% Minimum Filter Efficiency)
RT21 White Hydrogen Chloride, Hydrogen Fluoride, Sulfure Dioxide and Hydrogen Sulfide Cartridge with REAL-TIME ESLI (End-of-Service-Life Indicator)
RT21P100 White / Magenta Above with P100 Particulate Filter (99.97% Minimum Filter Efficiency)
RT41 Green Ammonia Cartridge with REAL-TIME ESLI (End-of-Service-Life Indicator)
RT41P100 Green / Magenta Above with P100 Particulate Filter (99.97% Minimum Filter Efficiency)
FINAL CATALOGUE #2 10/18/07 11:58 AM Page 42
North: Respirators
C43
770030L HALF MASK SHOWN
WITH N75003 CARTRIDGES
HALFMASK
77BAG FOR HALF MASK
Part# Description Packaging
770030S 7700 Series Half Mask (Small) 1 per package
770030M 7700 Series Half Mask (Medium) 1 per package
770030L 7700 Series Half Mask (Large) 1 per package
features and benefits• Silicone facepiece material conforms to facial features and doesn’t harden with age. Silicone is easy
to clean, extremely durable and resists distortion ensuring a better fit, time after time.
• Contoured sealing flange and cradle suspension system eliminates discomfort caused by pressure points on facial nerves. Design of nose area provides excellent comfort and fit.
• Minimal dead air space improves worker comfort by limiting re-breathing of exhaled air.
• Direct cartridge to facepiece seal minimizes replacement parts and simplifies maintenance.
• Three overlapping sizes will comfortably fit most users.
• North 7700 Series Half Masks are compatible with all North cartridges, filters and accessories.
Part# Description Packaging
77BAG Carrybag for Half Mask 1 per package
This durable, belt-mounted carry bag can be used with any North Half Mask Respirator.Along with your North Half Mask Respirator, there is room for safety glasses, ear plugs,respirator wipes and other small items.
The 7700 Series is the most comfortable and durable half mask available. Its soft non-allergenic silicone seal provides excellent protection, comfort and fit. The half mask cra-dle suspension system allows the facepiece to seal evenly on the face without creatingpressure points. Its low profile gives workers a wide field of vision and does not interferewith protective eyewear. The low inhalation and exhalation resistance of the 7700 Seriesmakes breathing easier to reduce worker fatigue.
7700 SERIES SILICONE HALF MASK
CARRY BAG
AIR-PURIFYING RESPIRATOR
FINAL CATALOGUE #2 10/18/07 11:58 AM Page 43
North: Respirators
C44
550030M HALF MASK SHOWN
WITH 7580P100 CARTRIDGES
AIR-PURIFYING RESPIRATOR
RESPIRATOR CONVENIENCE PACKS
5500 SERIES LOW MAINTENANCE HALF MASK
Part# Description Packaging
550030S 5500 Series Half Mask (Small) 1 per package
550030M 5500 Series Half Mask (Medium) 1 per package
550030L 5500 Series Half Mask (Large) 1 per package
77BAG Carrybag for Half Mask 1 per package
features and benefits• Made of an extremely soft non-allergenic elastomer for comfort and fit. Contoured sealing flange
eliminates discomfort caused by pressure points on facial nerves. Design of nose area providesexcellent comfort and fit.
• Low dead air space improves worker comfort by limiting re-breathing of exhaled air.
• Direct cartridge to facepiece seal minimizes replacement parts and simplifies maintenance.
• Three overlapping sizes comfortably fit most users.
• North 5500 Series Half Masks are compatible with all North cartridges, filters and accessories.
Part# Description Packaging
5501 S, M, L (2) N75001 cartridges 1 per package
5501N95 S, M, L (2) N75001 cartridges, (2) 7506N95 filters, (2) N750027 filter covers 1 per package
5501R95 S, M, L (2) N75001 cartridges, (2) 7506R95 filters, (2) N750027 filter covers 1 per package
5581P100 S, M, L (2) 7581P100 cartridges 1 per package
5580P100 S, M, L (2) 7580P100 filters 1 per package
5503 S, M, L (2) N75003 cartridges 1 per package
5583P100 S, M, L (2) 7583P100 cartridges 1 per package
55SCP100 S, M, L (2) 75SCP100 cartridges 1 per package
The 5500 Series is available in easy-to-order convenience packs. Conveniencepacks combine the most commonly used gas and vapor cartridges and/or particu-late filters with the 5500 Series Half Mask, to form a complete respirator. Seepages 16 and 17 for a description of gas and vapor cartridges and particulate fil-ters.
The North 5500 Series incorporates the comfortable and efficient design of thepopular 7700 Series half mask with the low cost and convenience of a dispos-able. All parts are replaceable, extending the useful life of the respirator.
Available in U.S.A. Only
MODEL 5501N95M
FINAL CATALOGUE #2 10/18/07 11:58 AM Page 44
FULL FACEPIECE
North: Respirators
C45
AIR-PURIFYING RESPIRATOR
760008A FULL FACEPIECE SHOWN
WITH 7584P100 CARTRIDGES
Accessories for the 7600 Series Full Facepiece
7600 SERIES SILICONE FULL FACEPIECE
80100
760023
760024
ACCESSORIES
Part# Description Packaging
760008A 7600 Series Full Facepiece (Medium / Large) 1 per package
760008AS 7600 Series Full Facepiece (Small) 1 per package
Part# Description Packaging
80100 Eyeglass frame. Plastic, no lenses 1 per package
760023 Eyeglass frame. Metal, no lenses 1 per package
760024 Eyeglass frame. Metal, no lenses 1 per package
80836A Peel-Away Windows (3 Windows per assembly) 5 per package
80944 Anti-fog Wipes 10 per package
76BAG Carrybag for Full Facepiece 1 per package
The 7600 Series Full Facepiece respirators are designed to provide eye, face andrespiratory protection while ensuring optimal comfort and performance. Its dualflange silicone seal gives this facepiece superior fitting characteristics. The hard-coated polycarbonate lens provides over 200° field of vision and protects thewearer’s eyes and face against irritating gases, vapors and flying particles. Thelens also provides excellent optics, is scratch resistant and meets ANSI standardsfor impact and penetration resistance. The 7600 Series Full Facepiece sets thestandard for full facepiece protection.
features and benefits
• Silicone facepiece material conforms to facial features and doesn’t harden with age. Silicone is easyto clean, extremely durable and resists distortion, ensuring a better fit time after time.
• Oral nasal cup reduces fogging and lessens dead air space to improve worker comfort by limiting re-breathing of exhaled air.
• Speaking diaphragm makes communication easy.
• Five-strap harness provides an effective and comfortable facepiece to face seal.
• Chin cup helps to position the facepiece properly.
• Neck strap allows wearer to park respirator when not in use.
• Two overlapping sizes, small and medium/large, will comfortably fit most users.
• North 7600 Series Full Facepieces are compatible with all North cartridges, filters and accessories.
FINAL CATALOGUE #2 10/18/07 11:58 AM Page 45
North: Respirators
C46
54001 FULL FACEPIECE SHOWN
WITH 7581P100 CARTRIDGES
AIR-PURIFYING RESPIRATOR
76BAG FOR FULL FACEPIECE
5400 SERIES LOW MAINTENANCE FULL FACEPIECE
ACCESSORIES
Part# Description Packaging
54001 5400 Series Full Facepiece (Medium/Large) 1 per package
54001S 5400 Series Full Facepiece (Small) 1 per package
Accessories for 5400 Series Full Facepiece
Part# Description Packaging
80100 Eyeglass frame. Plastic, no lenses 1 per package
760023 Eyeglass frame. Metal, no lenses 1 per package
80836A Peel-Away Windows (3 Windows per assembly) 5 per package
80944 Anti-fog Wipes 10 per package
76BAG Carrybag for Full Facepiece 1 per package
The 5400 Series provides the comfort and protection you would expect from North,at an unbeatable price. No other full facepiece in its price range offers such quali-ty, engineering and attention to detail. Weighing only 14 ounces, the 5400’s light-weight design offers a level of comfort that ensures greater worker acceptance.Plus, its facepiece seal is made from a soft, pliable elastomer material with highchemical resistance to assure excellent comfort, fit and performance.
features and benefits
• Each facepiece comes with three peel-away windows, six respirator wipes and a storage bag.
• Oral nasal cup reduces fogging and lessens dead air space to improve worker comfort by limiting re-breathing of exhaled air.
• Chin cup helps to position the facepiece properly.
• Hard-coated polycarbonate lens affords an over 200° field of vision, provides excellent optics, is scratchresistant and meets ANSI standards for impact and penetration resistance.
• Two overlapping sizes, small and medium/large, will comfortably fit most users.
• With many of the same components of the 7600 Series facepiece, replacement part inventory will bereduced.
• North 5400 Series Full Facepieces are compatible with all North cartridges, filters and accessories.
FINAL CATALOGUE #2 10/18/07 11:58 AM Page 46
North: Respirators
C47
760008AW FULL FACEPIECE
SHOWN WITH 7580P100 FILTERS
54001W FULL FACEPIECE
SHOWN WITH 7580P100 FILTERS
BP1002 SHOWN WITH 7700 SERIES
HALF MASK AND 7581P100 CARTRIDGES
NOTE: Facepiece and Cartridges sold separately
7190N99
PARTICULATE RESPIRATOR
FULL FACEPIECE WELDING RESPIRATORS
BP1002 BACKPACK ADAPTER
7190N99 LOW MAINTENANCE RESPIRATOR
The North Full Facepiece Welding Respirators have a welding shield constructed of a fireresistant thermoplastic material, that can be lifted upward on a locking hinge for a wide-angle view of the work area. It is available as a complete respirator or as an attachment,to convert your existing North 7600 Series or 5400 Series Full Facepiece.
7600 Series Full Facepiece
Part# Description Packaging
Complete Respirator760008AW 7600 Series Full Facepiece
with Welding Attachment (Medium / Large) 1 per package
760008ASW 7600 Series Full Facepiece with Welding Attachment (Small) 1 per package
Attachment8404 Welding Attachment Assembly
for 7600 Series Full Facepiece 1 per package
The backpack adapter allows users to locate cartridges and filters out of the work zone, byplacing them on the user’s back. The BP1002 is easily adaptable to all North FullFacepiece and Half Mask air-purifying respirators, simply by attaching it to the facepiececartridge connectors. It is ideal for tight or highly heated work places such as thoseencountered in welding operations. Think of it as an extension cord for your cartridges.
Part# Description Packaging
BP1002 Backpack Adapter* 1 per package
For solids, such as welding fumes and non-oil particulates (99 % minimum filter effi-ciency). Fits easily under welding hoods. Replacement filters available.
Part# Description Packaging
7190N99 N99 Particulate Respirator 1 per package
719009N99 Replacement Filters for 7190N99 2 per package
5400 Series Full Facepiece
Part# Description Packaging
Complete Respirator54001W 5400 Series Full Facepiece
with Welding Attachment (Medium / Large) 1 per package
54001SW 5400 Series Full Facepiece with Welding Attachment (Small) 1 per package
Attachment8405 Welding Attachment Assembly
for 5400 Series Full Facepiece 1 per package
FINAL CATALOGUE #2 10/18/07 11:59 AM Page 47
North: Respirators
C48
RESPIRATORS
NOTE: Facepiece, quick connectors and air supply hoses sold separately
NOTE: Cartridges / filters, quick connectors and air supply hoses sold separately
CF2007 SHOWN WITH
76008A FACEPIECE
78005 SHOWN
WITH 7581P100 FILTERS
7800 SERIES COMBINATION CONTINUOUS FLOW AND AIR-PURIFYING RESPIRATOR*
CF2000 SERIES CONTINUOUS FLOW AIRLINE RESPIRATOR*
Part# Description Packaging
CF2007 Includes interchangeable breathing tube,adjustable airflow valve and waist belt 1 per package
The CF2007 Interchangeable Breathing Tube easily converts an air-purifyingrespirator into a continuous flow respirator. It is easily adaptable to the North5500, 7700, 5400, or 7600 Series air-purifying facepieces, simply by removingthe cartridges and attaching the interchangeable breathing tube to the facepiececartridge connectors. No modifications, tools or extra components are needed.Using common facepieces for air-purifying and supplied air applications willreduce inventory and maintenance costs. It will also simplify your respiratorytraining and compliance with OSHA requirements for annual fit testing.
Designed to rest on the user’s back, out of the work zone and worker’s way, theCF2000 Series breathing tube allows workers to function for long periods oftime in toxic environments that are not Immediately Dangerous to Life orHealth (IDLH) by supplying a continuous flow of breathing air. North quick-connect couplers and air supply hoses must be ordered separately.
Part# Description Packaging
78005 (Medium/Large) Full Facepiece Assembly withor 78005S (Small) Breathing Tube and Fixed Flow Fitting 1 per package
78006 (Medium/Large) Full Facepiece Assembly with Breathingor 78006S (Small) Tube and Adjustable Flow Control Valve 1 per package
The 7800 Series is comprised of a continuous flow airline respirator approved for use witha variety of filters and / or cartridges incliding 7580P100 and 7581P100 cartridges. Twomodels are available with either belt mounted control valve or a fixed flow fitting.
features and benefits• Utilizes North halfmask and full facepieces, giving the user the advantages of these industry-lead-
ing products.
• Its two-piece hose is engineered to be soft and flexible where it attaches to the facepiece, reducingstrain on the face seal, while providing rugged protection against kinking and shut-off whenexposed to the work area.
• Its durable, ergonomically designed control valve monitors air flow as required by the user.
• Its wide adjustable belt will not “cut” into worker’s side when dragging an air supply hose.
FINAL CATALOGUE #2 10/18/07 11:59 AM Page 48
North: Respirators
C49
DECIDAMP2TM BREATHING APPARATUS
ESCAPE
89986 SHOWN
WITH 845
845 - SHOWN
IN OPEN POSITION
855850
845
ACCESSORIES
MODEL 845, 850 AND 855 EEBA
features and benefits• Pressure reducing valve with simplified design reduces repair costs and maintenance.
• Simple to use on / off valve with pressure gauge to easily test and check air cylinder pressure
• High visibility carrying bag and carrying strap system can be easily found in an emergency.
• Pictorial user instructions on bag are easy to understand in an emergency situation.
North offers three models of Emergency Escape Breathing Apparatus (EEBA) in fiveand ten minute units. Model 845 provides an average of 42 lpm of airflow for five min-utes, and the 850 provides 42 lpm for ten minutes. The Model 855 provides a higheraverage flow, 75 lpm, for five minutes, which is ideal where escape routes require highlevels of exertion. The 855 also features a unique diffuser / muffler system to reducenoise inside the hood.
All models feature a transparent hood made of durable polyurethane for superior visi-bility. To minimize fogging, a deflector blows incoming air onto the lens. After use, thehood can be detached for replacement or cleaning. The cylinder is lightweight andrefillable. An optional molded carrying case and wall-mounting bracket are also avail-able.
Part# Description Packaging
845 Five Minute EEBA (Avg 42 lpm) 1 per package
850 Ten Minute EEBA (Avg 42 lpm) 1 per package
855 Five Minute EEBA, High Flow (Avg 75 lpm) 1 per package
Part# Description Packaging
89986 Wall mounting bracket for 845, 850 and 855 1 per package
89987 Molded carrying case for 850 and 855 1 per package
89992 Molded carrying case for 845 1 per package
FINAL CATALOGUE #2 10/18/07 11:59 AM Page 49
North: Respirators
C50
83219
832
822K
800 SERIES SELF-CONTAINED BREATHING APPARATUS
MODEL 832 SELF-CONTAINED BREATHING APPARATUS
CYLINDERS AND ACCESSORIES
* Kevlar and Nomex are registered trademarks of Dupont Company.
** PBI is a Registered trademark of Hoechst Celanese Company Corp.
features and benefits• Utilizes either a thirty or sixty minute cylinder containing pressurized air which is delivered “on demand”
to the facepiece.
• The reducer / regulator has only three moving parts, a “fail-open” design and protective housing.
• The demand valve is a “First Breath Release” design, and provides greater than 300 liters per minute upon peak inhalation.
• The Kevlar®* / Nomex®* / PBI®** harness and back plate assembly is designed for comfort and proper weightdistribution during the most rigorous jobs.
• A patended speaking diaphragm / exhalation valve assembly offers clear intelligible voice transmission.
• Comes equipped with a luminous pressure gauge, stainless steel whistle assembly and locking quick-connects.
• All 800 Series SCBA’s include a carrying case. A wall mounting case can be purchased separately.
SCBA’ s provide the wearer with the highest level of respiratory protection available. Because thecylinders are worn on the back of the worker, the SCBA’ s are completely portable, enabling theworker the maximum mobility for crucial applications such as emergency response or rescue. The 800 Series utilizes the North soft silicone full facepiece design with dual sealing flange, oral /nasal cup and polycarbonate lens with greater than 200° field of vision.
Model 832 SCBA is a low cost and worry free unit designed specifically for use in non-fire emergency situations, for egress from a contaminated area, or for clean up of chemical / toxic spillsand accidents. It is easy to use, easy to maintain and extremely durable.
The Model 832 utilizes the North soft silicone full facepiece design. The reducer / regulator has onlythree moving parts, a “fail-open” design and protective housing. Its comfortable and adjustablepolypropylene harness system and ergonomically designed aluminum back plate provides user com-fort and ease of adjustment. Carrying case can be purchased separately.
Part# Description Packaging
821K, SK (Small) 60 Minute SCBA, 4500 psi, Aluminum / Full Wrapped Cylinder 1 per package
822K, SK (Small) 30 Minute SCBA, 2216 psi, Aluminum Cylinder 1 per package
823K, SK (Small) 30 Minute SCBA, 2216 psi, Aluminum / Hoop Wrapped Cylinder 1 per package
Part# Description Packaging
832, S (Small) 30 Minute SCBA, 2216 psi, Aluminum Cylinder 1 per package
Part# Description Packaging
80021 30 Minute Low Pressure (2216 psi) Aluminum Cylinder,45 cu. Ft. Capacity 1 per package
80022 30 Minute Low Pressure (2216 psi) Aluminum /Hoop Wrapped Cylinder, 45 cu. Ft. Capacity 1 per package
80032 60 Minute High Pressure (4500 psi) Aluminum / Full Wrapped Cylinder, 88 cu. Ft. Capacity 1 per package
83219 Deluxe Wall Case with shelf and single SCBA cylinder bracket (20" X 13" X 32.5", 10 lb) 1 per package
80994 Wall and Truck Mounting Bracket for SCBA 1 per package
80993 Molded carrying case for SCBA (included with 800 Series SCBA) 1 per package
80060 Airline Accessory for 800 Series – allows the SCBA to be used as an emergency escape device and a Pressure Demand Airline Respirator 1 per package
FINAL CATALOGUE #2 10/18/07 11:59 AM Page 50
North: Respirators
C51
North hoses are available for both 3/8" I.D. and 1/2" I.D. in 12 1/2', 25', 50', and 100' lengths. North offers Hansen, Schrader and Snap-Tite QuickConnect Couplers for connecting the hose to the facepiece or breathing hood, and the air source.
warning: If more than one hose is required, join the hoses together. Do not use couplers between hose lengths. Only one 12 1/2 ft.or 25 ft. length of hose should be used in combination with any hose length to a maximum of 300 ft. OSHA requires that couplersnot be interchangeable with any couplers used for non-breathing air or gas systems.
Air Supply Hoses
Part# Description
886012 12 1/2 ft. Air Hose, 3/8" I.D.
886025 25 ft. Air Hose, 3/8" I.D.
886050 50 ft. Air Hose, 3/8" I.D.
886100 100 ft. Air Hose, 3/8" I.D.
888012 12 1/2 ft. Air Hose, 1/2" I.D.
888025 25 ft. Air Hose, 1/2" I.D.
888050 50 ft. Air Hose, 1/2" I.D.
888100 100 ft. Air Hose, 1/2" I.D
Quick Connect Couplers for Connecting Air Supply Hose to Hood or Facepiece
Description Hansen Snap-Tite Schrader
Male plug with bushing for 3/8" NPT thread 880161H 880161ST 880161S
Female coupler for 3/8" I.D. Hose 880040H 880040ST 880040S
Female coupler for 1/2" I.D. Hose 880060H 880060ST 880060S
Coupler assembly for 3/8" I.D. Hose 88600H 88600ST 88600S
Coupler assembly for 1/2" I.D. Hose 88800H 88800ST 88800S
Hose Assemblies to combine 3/8" I.D. Hose with coupler assembly for connecting the air supply hose to hood or facepiece
Description Hansen Snap-Tite Schrader
12 1/2 ft. Air Hose, 3/8" I.D. 886012H 886012ST 886012S
25 ft. Air Hose, 3/8" I.D. 886025H 886012ST 886012S
50 ft. Air Hose, 3/8" I.D. 886050H 886050ST 886050S
100 ft. Air Hose, 3/8" I.D. 886100H 886100ST 886100S
Quick Connect Couplers for Connecting Air Supply Hose to Air Source
Description Hansen Snap-Tite Schrader
Male plug, for connecting to 3/8" I.D. Hose 880141H 880141ST 880141S
Male plug with bushing , for connecting to 1/2" I.D. Hose 880161H 880161ST 880161S
To attach coupler to air sourceFemale coupler for air source with 1/4" NPT male thread 880040H 880040ST 880040S
Female coupler for air source with 1/4" NPT female thread 880041H 880041ST 880041S
Female coupler for air source with 3/8" NPT male thread 880060H 880060ST 880060S
Female coupler for air source with 3/8" NPT female thread 880061H 880061ST 880061S
AIRLINE HOSES & QUICK CONNECT COUPLERS
FINAL CATALOGUE #2 10/18/07 11:59 AM Page 51
North: Respirators
C52
AND QUICK-CONNECT
COUPLERS
AIRLINE HOSES
FINAL CATALOGUE #2 10/18/07 11:59 AM Page 52
North: Respirators
C53
85785 FULL FACEPIECE SHOWN
WITH 7580P100 CARTRIDGES
85505
85525
85400A AND 85500A SERIES PRESSURE DEMAND AIRLINE RESPIRATORS*
85700 SERIES COMBINATION PDAR AND AIR-PURIFYING RESPIRATOR*
features and benefits
• Unique speaking diaphragm/ exhalation valve assembly offers clear communication.
• First breath demand valve with purge button prevents wearer from operating in a demand modeand makes it easier to put on the facepiece.
• May be used without emergency escape cylinder, or with 5-minute or 10-minute cylinder config-urations for versatility on the job.
The 85400A and 85500A Series are full facepiece pressure demand suppliedair respirators. Both Series feature the popular North silicone full facepiece forcomfort and fit. The manifold assembly features two inlet ports, allowing theworker to connect to a second air source before disconnecting from the first.
The 85400A is designed for use in atmospheres that are not immediately dan-gerous to life and health (non IDLH). The 85500A Series is equipped with lowprofile emergency escape air cylinder(s), making it ideal for escape in tightspaces. Cylinders are available for either 5-minute or 10-minute configura-tions, and may be used in IDLH atmospheres.
Part# Description Packaging
85401 (Medium/Large) PDAR with standard harness 1 per packageor 85401S (Small)
85505 (Medium/Large) PDAR with ONE 5 Minute Egress or 85505S (Small) Air cylinder and standard harness 1 per package
85510 (Medium/Large) PDAR with TWO 5 Minute Egress or 85510S (Small) Air cylinders and standard harness 1 per package
85525 5 Minute Emergency Escape Cylinder for 85500 Series 1 per package
The 85700 Series is a combination of a Type C pressure demand sup-plied-air respirator and an air-purifying particulate filter respiratorspecifically designed for use in atmospheres containing particulatematter where an airline is used, but where escape can be accomplishedusing an air-purifying respirator. Approved with 7580P100 cartridgesonly.
Part# Description Packaging
85785 Full facepiece with cartridge connectors (Medium/Large) 1 per package
85785S Full facepiece with cartridge connectors (Small) 1 per package
NOTE: Quick connectors and air supply hoses sold separately
NOTE: Filters, quick connectors and air supply hoses sold separately
FINAL CATALOGUE #2 10/18/07 11:59 AM Page 53
North: Respirators
C54
85301T
88600HV
* NOMEX® is a registered trademarks of E.I. DuPont de Nemours and Company. E.I. DuPont Canada Inc. is a licensee.** SARANEX® is a registered trademarks of Don Chemical Company.
VORTEX TUBE FOR 85300 SERIES HOOD RESPIRATOR
85300 SERIES CONTINUOUS FLOW AIRLINE HOOD RESPIRATOR*
features and benefits
• The headgear ratchet assembly easily adjusts for personal comfort and fit.
• Airline hoods are lightweight, quiet and easily fit over facial hair and eye glasses for greater com-fort and better worker acceptance.
• The breathing tube is non-kinking to reduce the chance of collapse or air restriction.
• Non-fogging lens offers a wide field of view and a clear view of the work zone.
• Disposable hoods and the peel away cover lens will reduce cleaning and maintenance costs.
The 85300 Series assures the wearer superior comfort, clear vision and excellentmobility. It offers excellent protection against airborne contaminants in a varietyof applications including spray painting, abatement, pharmaceutical manufactur-ing and chemical handling.
Replacement hoods are available in Tyvek®* fabric and a Saranex®** coated Tyvekin regular and extended bib. Replacement hoods, peel-away cover lenses andNorth quick-connect couplers and air supply hoses must be ordered separately.
Airline hood assembly including hood, ratchet suspension, breathing tube and waist belt.
Part# Description Packaging
85301T With Tyvek® hood 1 per package
85301TB With Tyvek® hood, bibbed 1 per package
85301S With Saranex coated hood 1 per package
85301SB With Saranex coated hood, bibbed 1 per package
The vortex tube provides greater comfort to the worker by cooling or warmingthe breathing air. It is color coded and simple to use. Air temperature can beadjusted to warm or cool the air by plus or minus 30°F. The vortex tube comespre-assembled with Hansen (HV), Schrader (SV) or Snap-Tite (STV) couplers.For use with 85300 Hoods for either heating or cooling.
Part# Description Packaging
88600 HV, SV, STV Vortex tube with Hansen (HV), Schrader (SV)or Snap-Tite (STV) Couplers for 3/8" hose 1 per package
88800 HV, SV, STV Vortex tube with Hansen (HV), Schrader (SV)or Snap-Tite (STV) Couplers for 1/2" hose 1 per package
Replacement hoods
Part# Description Packaging
85301TA For 85301T, Tyvek 10 per package
85301TBA For 85301TB Tyvek, bibbed 10 per package
85301SA For 85301S Saranex coated Tyvek 10 per package
85301SBA For 85301SB Saranex coated Tyvek, bibbed 10 per package
NOTE: Quick connectors and air supply hoses sold separately
FINAL CATALOGUE #2 10/18/07 11:59 AM Page 54
North: Respirators
C55
80992
7904
770023
770021
7003
770040
79BAG
7902
EMERGENCY ESCAPE MOUTHPIECE RESPIRATOR
QUALITATIVE FIT TEST KITS
QUANTITATIVE FIT TEST ADAPTERS
REFRESHER WIPE PADS
CLEANER / SANITIZER POWDER
Part# Description Packaging
7902 Emergency Escape Mouthpiece Respirator 1 per package
7904 Emergency Escape Mouthpiece Respirator 1 per package
79BAG Carrybag for Mouthpiece Respirator 1 per package
The 7902 emergency escape mouthpiece respirator is approved for protection duringescape only from atmospheres containing Chlorine, Hydrogen Chloride, HydrogenSulfide, Chlorine Dioxide and Sulfur Dioxide. The 7904 is approved for respiratory protection during escape only from atmospheres containing Ammonia.
Part# Description Packaging
770039 Bitrex® Qualitative Fit Test Kit 1 per package
770040 Irritant Smoke Qualitative Fit Test Kit 1 per package
A choice of two portable fit test kits are available for testing employees that wear air-purifying respirators. Used properly, these kits will keep you in compliance with OSHAregulations for qualitative fit testing. The irritant smoke qualitative fit test kit includesan air-purifying training video.
Part# Description Packaging
7003 Refresher Wipe Pads 100 pads individually wrapped per pkg
7003A Refresher Wipe Pads (alcohol free) 100 pads individually wrapped per pkg
Refresher wipe pads provide a quick, easy method of removing perspiration and bodyoils from the respirator facepiece between scheduled cleanings. These wipe pads makerespirator usage more acceptable to the wearer by improving comfort.
Part# Description Packaging
80992 Cleaner / Sanitizer Powder 6 per package
The 80992 germicidal solution is an EPA (Environmental Protection Agency)registered product. You can use it for routine cleaning and disinfecting of yourrespirator facepiece.
Part# Description Packaging
770021 Fit Test Adapter for 5400, 5500, 7600, 7700, 7800 Series respirators. 1 per package
770023 Converter (used with the 770021) to fit test 80004 and 80004S Pressure Demand Airline and SCBA Facepieces 1 per package
FINAL CATALOGUE #2 10/18/07 12:00 PM Page 55
C56
North: Respirators
North has designed and engineered this respirator to provide exceptional comfortand worker protection. It features a soft cushioned nose seal for added comfort anda curved nose clip for improved fit. The headstraps are latex free. The 7130N95provides protection from solids and particulate aerosols free of oil, and is ideal fordusty environments such as grinding, sanding and sweeping.
This respirator has the same features as the 7130N95, with the added benefit of a built-in exhalation valve for cooler and easier breathing. The 7140N95 provides protectionfrom solids and particulate aerosols free of oil.
95% MINIMUMFILTER EFFICIENCY
Disposable Comfort Mask for protection against non-toxic dusts. Not NIOSH approved.
RP1500
7140N95
7130N95
8140N95
Part# Description Packaging
RP1500 Comfort Masks 50 per package
Part# Description Packaging
7130N95 N95 Particulate Respirator 20 per package
Part# Description Packaging
7140N95 N95 Particulate Respirator with exhalation valve 10 per package
COMFORT MASK
N95 PARTICULATE RESPIRATORS
Comfortable and durable, the 8140P95 features a foam-cushioned facepiece seal that con-forms closely to the face for long lasting comfort and protection, latex free straps, and a builtin-in exhalation valve for cooler and easier breathing. The 8140P95 provides protection fromany particulates, and is ideal for machining and other dusty and oily operations.
95% MINIMUMFILTER EFFICIENCY
P95 PARTICULATE RESPIRATOR
Part# Description Packaging
8140P95 P95 Particulate Respirator with exhalation valve 10 per package
This provides protection from dust, mists and fumes at an economical price. The maskfeature a foam nose pad and latex free straps. Use in duty environements that are freefrom oil.
Part# Description Packaging
6130N95 N95 Particulate Respirator 30 per package
6130N95
FINAL CATALOGUE #2 10/18/07 12:00 PM Page 56
North: Respirators
C57
4200/QNKT
4200M
CFR-1 RESPIRATOR
4200MW
CFR-1 RESPIRATOR
features and benefits• Soft thermoplastic elastomer seal provides maximum comfort to ensure greater worker acceptance.
• Exhalation valve removes air quicker for easier and cooler breathing.
• Inhalation valve keeps the filter drier and allows the user to perform a positive pressure seal check.
• Adjustable harness system will ensure a comfortable and secure fit.
• Parking mechanism provides a convenient place to put respirator when not in use.
• N95 and R95 filters available for a wide range of applications.
• Three sizes to comfortably fit most users.
The CFR-1 Welding Respirator comes with a stainless steal mesh cover to protect the userfrom heat, sparks and slag.
North’s new CFR-1 reusable particulate respirators give workers the comfort and protec-tion they deserve at a much better value than ordinary dust masks. Ordinary dust masksquickly get warm, moist and uncomfortable and are often replaced several times a day.The filter in the CFR-1 does not touch the face keeping it cool and dry, and one filter canprovide all day protection. The facepiece is reusable, and replaceable filters will savemoney and reduce waste.
The CFR-1 fit test kit contains one each of small, medium and large 4200masks, probed to perform quantitative fit testing. 100 refresher wipe padsplus extra suction cups and tubes for fit testing are also included. Therugged storage case keeps contents secure and readily available whenneeded. The 4200/QNKT is used in conjunction with a PortaCount®* fittester with the N95 companion.
Part# Description Packaging
4200S CFR-1 Respirator (Small) 1 per package
4200M CFR-1 Respirator (Medium) 1 per package
4200L CFR-1 Respirator (Large) 1 per package
Part# Description Packaging
4200SW CFR-1 Welding Respirator (Small) 1 per package
4200MW CFR-1 Welding Respirator (Medium) 1 per package
4200LW CFR-1 Welding Respirator (Large) 1 per package
Respirator
Welding Respirator
Part# Description Packaging
42N95 N95 replacment filters for CFR-1 respirator 20 per package
42R95 R95 replacment filters for CFR-1 respirator,for use in oil environments 10 per package
77BAG Carrybag for Half Mask 1 per package
Part# Description Packaging
4200/QNKT Quantitative fit test kit for CFR-1 respirator 1 per package
Replacment filters and accessories
QUANTITATIVE FIT TEST KIT
CFR-1™ COMFORT FIT RESPIRATORY SYSTEM
* PortaCount® is a registered trademark of TSI Inc.
42N95
REPLACEMENT FILTERS
42P95
REPLACEMENT FILTERS
FINAL CATALOGUE #2 10/18/07 12:00 PM Page 57
North: Confined Space Respirators
5400 SeriesProvides the comfort and the protection you
need at an unbeatable price. Facepiece seal is made from soft elastomer material with high chemical resistance.Nose cup is standard. Also available with a welding attachment.Two sizes (small and medium/large)
Use with the CF2007 Breathing Tube
54001, S Full Facepiece54001W, SW Full Facepiece with
Welding Attachment(not shown)
5500 SeriesMade of soft elastomer for comfortand fit. Contoured sealing flangeeliminates pressure points on facialnerves.
Use with the CF2007 Breathing Tube
550030S, M, L Half Mask
CF2007 Breathing TubeConvert the North full facepiece and half masks into a continuous flow respirator. Attaches easily to the cartridge connectors without any modifications, tools or extra adapters. Assembly includes an adjustable flowvalve and belt.
7600 SeriesSilicone full facepiece has dual flange for superior fit. Polycarbonate lensoffers wide field of vision. Nose cupand speech diaphragm are stan-dard, Also available with a welding
attachment.Two sizes (small & medium/large)
Use with the CF2007 Breathing
Tube
760008A, S Full Facepiece760008AW, SW Full Facepiece with
Welding Attachment(not shown)
7700 SeriesThe most comfortable and durable halfmask available. Non-Allergenic siliconefor excellent fit and protection.Three sizes (small, medium, large)
Use with the CF2007 Breathing Tube
770030S, M, L Half Mask
STEP 1Select your Facepiece
Pump & Kit Selection… in Three Simple Steps
Choice of models: 1/4 HP, 3/4 HP, 1-1/2 HP to meet
a variety of applications. Pumps are available
individually or as a kit with facepiece or hood, hose
and couplers. Economical and easy to maintain.
C58
FINAL CATALOGUE #2 10/18/07 12:00 PM Page 58
North: Confined Space Respirators
Use with 86600 or 86610
Ambient Air Pumps
888050H(1) 50 ft air hose, 1/2” ID #888050(1) Hansen coupler assembly #88800H
888100H(1) 100 ft air hose, 1/2” ID #888100(1) Hansen coupler assembly #88800H
Use with 86630 Ambient Air Pump
888050HAP1.5(1) 50 ft air hose, 1/2” ID #888050(1) Hansen female coupler #880060H(1) Hansen NPT male coupler #970074BN(1) Hansen male coupler #880161H
(for respirator connection)
888100HAP1.5(1) 100 ft air hose, 1/2” ID #888100(1) Hansen female coupler #880060H(1) Hansen NPT male coupler #970074BN(1) Hansen male coupler #880161H
(for respirator connection)
STEP 2Select your Hose Assembly
85301T Tyvek Hood85301S Saranex Coated Hood
85301TB Tyvek Hood, Bibbed85301SB Saranex Coated Hood, Bibbed
78005, S Fixed Flow78006, S Adjustable Flow
Cartridges and Filters Sold Seperately
7580P100 P100 Filters7581P100 Organic Vapor / P100 Cartridge
Filter CombinationN75001 Organic Vapor Cartridge
* Tyvek is a registered trademark of E.I. DuPont de Nemours and
Company. E.I. DuPont Canada Inc. is a licensee.
** Saranex is a registered trademark of the Dow Chemical Company.
7800 SeriesSilicone full facepiece with breathingtube and cartridge connectors. May
be used in the negative pressuremode for entry/exit or emergency escape from non-IDLH environments.Assembly includes breathing
tube and belt. Availablewith fixed or adjustableflow, in two sizes(small &medium / large)
Cartridges and filterssold separately. Refer to
the NorthRespiratoryCatalog for acomplete listing.
85300 SeriesLightweight hoods fit easilyover hair and eye glasses.Ratchet suspension for easyadjustment. Available inTyvek®* or Saranex®** CoatedTyvek, with or without bib.Assembly includes breathingtube and belt.Not for use with 86600
ambient air pump
C59
FINAL CATALOGUE #2 10/18/07 12:00 PM Page 59
NNoorrtthh:: CCoonnffiinneedd SSppaaccee RReessppiirraattoorrss
APPA
All in one box Pump Kits!All inclusive kits makes your selection even easier. Kits contain everything you need to set up an airlinesystem. Includes pump, hoses, couplers, and facepiece or hood with breathing tube. For one person only
PUMP MAX. NO. MAX. NO. HOSE ASSEMBLYPART# FACEPIECE HOOD PART#86600 1 — 888050H
PUMP MAX. NO. MAX. NO. HOSE ASSEMBLYPART# FACEPIECE HOOD PART#86610 2 1 888050H or 888100H
PUMP MAX. NO. MAX. NO. HOSE ASSEMBLYPART# FACEPIECE HOOD PART#86630 3 2 888050HAP1.5 or 888100HAP1.5
86600AMBIENT AIR PUMP 1/4HPFor one worker with tight fitting facepiece only
Lightweight unit, easy to carry (33 lbs)
Supplies up to 5 cfm
Ideal for painting, cleaning, grinding or chemical handling applications
86610AMBIENT AIR PUMP 3/4HP
For two workers with a tight fitting facepieceor one worker with loose fitting hood
Lightweight unit featuring carrying handle (55 lbs)
On/Off switch for easy shut off
Supplies up to 10 cfm
Ideal for a variety of work environments including
painting and refinishing booths
86630AMBIENT AIR PUMP 1-1/2HPFor three workers with a tight fitting facepiece or two workers with a loose fitting hood
On/Off switch for easy shut off
Built in cooling fan
Supplies up to 20 cfm
Ideal for heavy duty applications
SSTTEEPP 33SSeelleecctt yyoouurr PPuummpp
Kit part# Pump # Hose Assembly Breathing tube Facepiece/hoodAPPA 86610 888050H CF2007 54001
APPB 86610 888050H — 85301T
APPC 86610 888050H CF2007 770030M
APPD 86600 888050H CF2007 54001
APPE 86600 888050H CF2007 770030M
C60
FINAL CATALOGUE #2 10/23/07 9:30 AM Page 60