3

Today, companies need to be fast and flexible in every phase of their operations—and that includes end-of-line packaging. The 3M-Matic™ Random Case Sealer 7000r Pro gives manufacturers and distributors from every industry the packaging flexibility and speed to stay one step ahead of the competition.

This advanced technology case sealer is an ideal solution for top and bottom sealing of random-sized cases. Automatically adjusting to both case height and width, the 3M-Matic™ Random Case Sealer 7000r Pro can handle up to 24 different case sizes per minute.

3M-Matic™ Random Case Sealer 7000r Pro

And now, better than ever.

3M-Matic™ Case Sealers: Consistent. Reliable. Tough.

1

3M, 3M-Matic and AccuGlide are trademarks of 3M. Used under license in Canada. Please recycle. Printed in Canada. © 2014, 3M. All rights reserved. 1408-01644E

Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the product in a particular application, including the conditions under which the 3M product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application. Warranty and Limited Remedy: 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to repair or replace the product or refund the purchase price. Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, condition, contract, negligence or strict liability.

Learn more about 3M’s full line of case sealing solutions at 3M.com/3M-Matic

Innovative Features

• 3M™ AccuGlide™ 3 Taping Heads ensure reliable application of tape without box damage

• Auxiliary offset taping head position provides more flexibility in sealing shorter boxes

• Interchangeable 2-inch or 3-inch taping heads maximize production flexibility

• Rugged, dual-extruded columns allow for smooth, incremental adjustments to case heights

• Photo eye detection for box centering quickly responds to cartons of different widths

• Electro-mechanical height adjustment delivers precision performance and durability

Standard Features

• Top and bottom belt drive system

• Centrally located emergency stop

• Dual masts

• Infeed conveyor

Options: Exit conveyor, locking casters, low tape indicator, light indicator

1 Requires a column adjustment for case heights lower than 4.25N or higher than 28N.2 Minimum case height of 1.5N requires LHB taping heads in 1-3/8N tape leg position and 78 fpm belt speed. Note: Case heights lower than 3.25N require a minimum case width of 12N.

3 Maximum case height of 36N can be obtained by moving the columns and upper assembly to the upper position. Minimum will be 14.625N.

Box Dimensions for 7000r Pro and 7000r3 Pro Machines: Inches (mm)

Length

Width

Height1

Standard Position Standard Position Offset Position

Standard Tape Leg Length Short Tape Leg Length Short Tape Leg Length

Minimum2 6N (152 mm) 6.5N (165 mm) 4.25N (108 mm) 3.75N (95 mm) 2.75N (70 mm)

Maximum3 N/L 26.5N (673 mm) 26N (660 mm) 25.5N (648 mm) 23.75N (603 mm)

Electrical115V60Hz3.8A440 watts8� cord

Platform height with adjustable legs21� (508mm) to35� (864mm)

Max height inextended position104� (2642mm)

7000r Pro is equipped with 2-inch 3M™ AccuGlide™ 3 Taping Heads7000r3 Pro is equipped with 3-inch 3M™ AccuGlide™ 3 Taping Heads

Drive belt speed100 fpm (0.5m/s)

Width of machinenot including masts30.25� (768mm)

Width including masts37.75� (959mm)

Width of conveyors30.25� (768mm)

Optional casters add an additional 4.38� (111mm) height

Length of machine (without conveyors)46.25� (1175mm)

Length of conveyor18� (457mm)

Crated weight400lbs (181kg)

Uncrated weight350lbs (159kg)

Operating rate is up to24 cases per minute Air required per operating manual

2

3Industrial Adhesives and Tapes Division 3M CanadaPost Office Box 5757London, Ontario N6A 4T1Canada