3M Adhesivos y Cinta

3M™ Industrial Adhesives and Tapes

2

Table of Contents

3M™ Structural Adhesives 6-11

3M™ Scotch-Weld™ Epoxy, Acrylic, and Urethane Adhesives 6-7

Rite-Lok™ Cyanoacrylate Adhesives 8-9

Rite-Lok™ Anaerobic Adhesives 10-11

3M™ Adhesive and Tape classifications 4

Substrates and adhesion 5

3M™ Non-Structural Adhesives 12-16

3M™ Scotch-Weld™ Hot Melt Adhesives and Applicators 12

3M™ Scotch-Weld™ Contact Adhesives 13

3M™ Fastbond™ Contact Adhesives & Cylinder Spray Adhesives 13

3M™ Polyurethane and Hybrid Adhesives & Sealants 14

3M™ Aerosol Adhesives 15

3M™ Cleaners and Lubricants 16

3M™ Bonding Tapes 17-31

Tape Selection Guide 17-19

3M™ VHB™ Tapes 20-21

3M™ VHB™ Tapes for Signs 22

3M™ Double Coated Foam Tapes for Mounting 23

3M™ Double Coated Tapes 24-25

3M™ Removable/Repositionable Tapes 26

3M™ Adhesive Transfer Tapes 27-28

3M™ Extended Liner Tapes 29

3M™ Membrane Switch Adhesives 30

Scotch® ATG Adhesive Systems 31

Page 63M™ Structural Adhesives

Page 123M™ Non-Structural Adhesives

Page 173M™ Bonding Tapes

Page 323M™ Masking Solutions3M™ Masking Solutions 32-33

3M™ Masking Tapes 32

3M™ Duct Tapes and Cloth Tapes 33

3

For full products listing, please contact 3M.

Table of Contents

3M™ Surface Protection Solutions 41-43

3M™ Bumpon™ Protective Products – Molded Shapes, Polyurethane Rollstock 41

3M™ Clean-Walk Mats 42

3M™ Protective Tapes 42-43

3M™ Specialty Solutions 44-51

3M™ Specialty Tapes 44-45

3M™ Glass Cloth Tapes 46

3M™ Metal Foil Tapes 47

3M™ Polyester Tapes 48

3M™ Slick Surface Tapes 49

3M™ Vinyl and Polyethylene Tapes 50-51

3M™ Sound Damping Foils 51

Page 413M™ Surface Protection Solutions

Page 443M™ Specialty Solutions

Page 343M™ Packaging Solutions

Page 52Other TechnologiesOther Technologies 52-56

3M™ Performance Label Materials 52

3M™ Scotchmate™ and Dual-Lock™ Reclosable Fasteners 53-54

3M™ Flexographic Mounting Systems 55-56E-Series Tapes with Easy Mount AdhesiveEH-Series Adhesive to hold the edge on small diameter cylinders

3M™ Packaging Solutions 34-40

Scotch® and Tartan™ Box Sealing Tapes 34

Scotch® High Strength Tapes with Clean Removal 35

Scotch® High Strength Filament Tapes 36

Scotch® Manual Dispensers 37

3M-Matic™ Adjustable Case Sealers 38

3M™ Package Attachment and Label Protection Products 39

3M™ Padded Tape Products 39

3M™ ScotchPad™ Carry Handles 40

Numerical Product Index 57-58

4

3M™ Adhesive and Tape classifications – you really can’t say “glue” any moreAt one time, adhesive and glue were used synonymously. In industry today, however, designers and engineers are using terms like two-part low-odor acrylic, high bond tape, PUR systems, cyanoacrylate, and more. Glue is now considered to be something sticky which is no longer a characteristic of many adhesives.

3M adhesives can be classified in several ways.

Classify by form

3M adhesives are available as liquids, pastes, tapes, films, and shaped solids. Each has characteristics to be considered for application effectiveness and efficiency.

Liquids and pastes readily fill voids to enhance mechanical adhesion. Many liquids can be sprayed to cover large areas.

Films and pressure sensitive tapes offer advantages unique to their form:• Uniformthicknessthroughoutthejoint.• Confinementoftheadhesivetotheimmediatebondingarea.• Cleanbondingwithoutdrippingoroverflow.• Minimumadhesivewaste.• Die-cutintocomplexshapestofacilitatebondingofcomplexpartsor parts with narrow bonding surfaces.

Hot melts are supplied as solid sticks, cartridges, pellets, or similar shapes. Handling and storage is easy and neat.

Classify by strength

Another classification for industrial applications is by relative strength and solidification process. Generally, those adhesives that bond through a chemical reaction are stronger than those that bond through a physical change.

Structural adhesives bond by chemical reaction.

3M™ Structural Strength Adhesives bond the load-bearing parts of a product. As a rule of thumb, structural strength adhesives reach a minimum of 1,000 psi overlap shear strength. 3M formulations include the following:

• Epoxyadhesivesareavailableinoneandtwo-partliquidsandpstes. Of all 3M adhesives, these provide the highest strength and elevated temperature resistance.

• Acrylicadhesivesaretwo-partliquidsandpastestobondthewidest variety of substrates including hard-to-bond plastics and oily metals. The distinction is high strength bonding without the surface preparation needed for epoxies and urethanes.

•Urethaneadhesivesaregenerallylowercosttwo-partliquidsand pastes that cure quickly to an elastic bond in applications requiring flexibilitybetweendissimilarmaterials.Impactresistanceisa distinctive characteristic.

• Cyanoacrylateadhesivesarehighstrengthliquidformulationsknown as instant adhesives. On rigid plastic, glass, metal, rubber, and other low porosity substrates, they harden in seconds through reaction with surface moisture.

•Anaerobicadhesivesareliquidsthatcuretoatoughplasticinthe absence of oxygen and in the presence of metal. Typical applications include threadlocking, retaining, gasketing, and sealing.

Non-structural adhesives bond with a physical change.

Non-structural adhesives vary in strength from repositionable to strength equal to or greater than the strength of the substrate being bonded. These adhesives are typically less than 1000 psi and bond materials in cushions, gaskets, insulation, veneers, and general assembly. 3M formulations include the following:

• Hotmeltadhesivesmeltandflowunderheattowetthesubstrates and make bonds quickly upon cooling. Products are available with a variety of characteristics such as short set times, sprayable formulas, and permanent PSA properties. Applications range from sealing to bonding automotive interior trim.

• Rubberadhesivesaresolvent-basedorwater-basedandsolidify through evaporation of the carrier. Products are designed for adhesion to various substrates, application methods, and environmental resistance of the bonded product.

• Contactbondadhesivesareusuallyrolled,brushed,orsprayed on the two surfaces to be mated and permitted to become dry to the touch with a variety of open times. When the surfaces are pressed together, near ultimate bond strength is achieved.

Pressure sensitive adhesives

Pressure sensitive adhesives (PSAs) found in 3M tapes grip immediately to mating surfaces. With dwell time, the adhesive conforms to surface irregularities.

3M hybrid classifications

• Curinghotmelts(PolyurethaneReactive[PUR]adhesives)are moisture-curing urethanes that apply like a hot melt adhesive but cool to bond strength usually associated with two-part structural adhesives.

• Reclosablefastenerscombineadhesiveandmechanicalfastening principles. Pressure sensitive adhesive permanently bonds two reclosable mating strips to the substrates that need to be opened and closed multiple times.

3M™ Adhesive and Tape classifications

5

Substrates and adhesion

Substrates and adhesion – a surface phenomenon, so know surfaces wellAdhesives attach to the surfaces of two substrates, unlike a process that fuses substrates into a unified whole such as welding metal or solvent activation of plastics. In selecting a 3M adhesive or tape, surface condition must be considered: roughness, smoothness, porosity, coated, uncoated,cleanliness,flexibility,sizeofthepart,andsurfaceenergyofthe part.

Adhesivepaste,forexample,flowsreadilyintoaroughsurfaceforimproved effective adhesion. Flexible materials such as paper or thin gauge metal can be bonded with a thin adhesive transfer tape. Large rigid parts with smooth clean surfaces can be bonded with a variety of 3M products ranging from double coated foam tapes to two-part structuraladhesives.Someplasticshaveplasticizerswhichmigratetothesurfaceanddegradethebondovertime,soaplasticizer-resistantadhesive or tape is essential. If the substrate has been powder coat painted, the coating is the bonding surface rather than the substrate, and you would want to consider a 3M tape or adhesive developed specifically for that surface.

Surface energy ranges from high to low. To illustrate the concept of surface

energy, think of water on the unwaxed hood of a car. The unwaxed hood hashighsurfaceenergyandwateronthehoodflowsintopuddles.Incomparison, a waxed hood has low surface energy and the water beads up ratherthanflowsout.Similartowater,adhesiveonahighsurfaceenergysurfaceflowsand“wetsout”thesurface.“Wettingout”isrequiredtoforma strong bond.

As a rule of thumb, the higher the surface energy, the greater the strength of adhesion.

Specially formulated adhesives are available for low surface energy surfaces. The following illustrations and surface rankings give you an idea of relative surface energy.

Regardless of surface energy, the substrate must be unified, dry, and clean tomaximizeadhesivecontact.

Metal Surfaces(High Surface Energy)

High Surface EnergyPlastics (HSE)

Low Surface EnergyPlastics (LSE)

mJ/m2 Surfaces50 Kapton® Industrial Film47 Phenolic46 Nylon45 Alkyd Enamel43 Polyester43 Epoxy Paint43 Polyurethane Paint42 ABS42 Polycarbonate39 PVC Rigid38 Noryl® Resin38 Acrylic

mJ/m2 Surfaces1103 Copper840 Aluminum753 Zinc526 Tin458 Lead700-1100 Stainless Steel250-500 Glass

mJ/m2 Surfaces37 PVA36 Polystyrene36 Acetal33 EVA31 Polyethylene29 Polypropylene28 Polyvinyl

Fluoride Film18 PTFE Fluoropolymer

4 5 6

Note: These values are provided as a guide. Formulation modifications can substantially alter surface energies.

6

3M™ Structural Adhesives

3M™ Scotch-Weld™ Epoxy, Acrylic, and Urethane Adhesives

Load-bearing formulations for metals, rubber, glass and more

As an alternative to mechanical or fusion fastening, the reasons for 3M™ Scotch-Weld™ Epoxy, Acrylic and Urethane Adhesives are many: greater design latitude, cleaner lines, material substitution, less machining, lighter weight, more durability, and often less cost.

To meet application and end-use requirements, there are formulations for bonding steel, aluminum, copper, low surface energy plastics, rubber, glass, wood, masonry and more. Depending on adhesive, select from duo-pak cartridges, cans, tubes, pails, and drums.

Whatever properties you need – durable adhesion,flexibility,creepresistance,heatandenvironmental resistance, or void-filling – you’ll likely find a 3M™ Scotch-Weld™ Structural Adhesive to meet your requirements and expectations

With no surface preparation, 3M™ Scotch-Weld™ Structural Acrylic Adhesive DP8005 bonds the mitered corners of a simulated-wood composite plastic P.O.P. display, eliminating nails that would compromise appearance.

3M™ Scotch-Weld™ Epoxy Adhesive DP420 bonds steel couplings into aluminum tubing of a bicycle frame. Couplings are threaded

With a 400ml cartridge, the 3M™ EPX™ Pneumatic Applicator applies 3M™ Scotch-Weld™ Epoxy Adhesive DP420 to bond ABS components of an automotive breather valve. The toughened epoxy at the inlet port seals in the high pressure and air/fuel mixture.

3M™ Scotch-Weld™ Structural Adhesive EC2216 bonds honeycomb to aluminum for common applications in aerospace and transportation.

3M™ Scotch-Weld™ Epoxy Adhesive 2214 bonds and seals refrigerant coils with overlap shear strength of 4500 psi. One part eliminates metering and mixing

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 requires minimal surface preparation for bonding metal hinges into awning frames. Reaches handling strength in only 10 minutes.

7


Product Information:Ep

oxy

Acry

lic

DP100 (Clear)

DP100 Plus (Clear)

DP100NS (Translucent)

DP100FR (White)

DP105 (Clear)

DP110 (Gray)

DP110 (Translucent)

DP125 (Gray)

DP125 (Translucent)

DP190 (Gray)

DP190 (Translucent)

DP270 (Black, Clear)

DP405(Black)

DP405LH(Off-white)

DP420LH(Off-white)

DP420 (Off-White)

DP420 (Black)

DP420NS (Black)

DP460 (Off-White)

DP460NS (Off-White)

DP920(Light tan)

EC2216* (Gray)

DP805 (Lt. Yellow)

DP807 (Lt. Yellow)

DP810 (Tan, Black)

DP8010NS (Off-White)

DP812(Lt. Yellow)

DP810NS(Tan)

DP820*(Lt. Yellow)

DP825 (Lt. Yellowto Lt. Amber)

DP8005(Off-White, Black)

DP8010(Off-White)

General PurposeRigid bonds

VeryflexibleColorless

General PurposeNon-sag

Flame RetardantUL94 V-0 rating

VeryflexibleColorless

General PurposeFlexible bonds

General PurposeFlexible bonds

High PerformanceVeryflexiblebonds


High PerformanceFlexible bonds

High PerformanceFlexible bonds

Rigid potting compoundNon-corrosive

Short work life andfast cure

Low halogen version ofDP405

Low halogen version ofDP420

Tough durable bondsHigh impact resistance


Tough durable bondsNon-sag



Medium work life Bonds oily metal


Fast strength build-upMinimal surface prep



Bonds polyolefins and lowsurface energy materials



Medium work life Minimal surface prep

Medium work life Minimal surface prep



1:1

1:1

1:1

1:1

1:1

1:1

1:1

1:1

1:1

1:1

1:1

1.1

2:1

2:1

2:1

2:1

2:1

2:1

2:1

2:1

2.1

2:3

1.1

1.1

1.1

10.1

1.1

1.1

1.1

1.1

10.1

10.1

13,000

8,500

95,000

80,000

6,500

55,000

50,000

52,500

15,000

80,000

10,000

12,000

14,000

14,000

30,000

30,000

30,000

180,000

30,000

125,000

10,000

80,000

110,000

50,000

20,000

65,000

50,000

95,000

55,000

50,000

25,000

20,000

5 minutes

4 minutes

5 minutes

6 minutes

5 minutes

8 minutes

25 minutes

25 minutes

25 minutes

90 minutes

80 minutes

60 minutes

4 minutes

4 minutes

20 minutes

20 minutes

20 minutes

20 minutes

60 minutes

60 minutes

20 minutes

90 minutes

3 minutes

5 minutes

10 minutes

10 minutes

10 minutes

10 minutes

15 minutes

25 minutes

3 minutes

10 minutes

20 minutes

20 minutes

20 minutes

20 minutes

20 minutes

8 minutes

20 minutes

2.5 hours

2.5 hours

10 hours

6 hours

3 hours

10 minutes

10 minutes

2 hours

2 hours

2 hours

2 hours

4 hours

4 hours

3 hours

10 hours

10 minutes

10 minutes

20 minutes

2 hours

20 minutes

20 minutes

40 minutes

40 minutes

3 hours

2 hours

2

10

2

2

35

20

20

35

35

20

20

2

21

21

50

50

50

50

60

60

20

25

35

20

20

20

20

20

20

20

20

20

900 1,500 300

3,000 3,500 200

900 1,500 300

1,250 2,200 800

3,500 2,000 150

2,700 3,500 250

2,500 2,500 200

3,400 4,300 400

4,000 2,500 150

1,500 2,500 400

3,500 1,200 150

1,200 2,500 300

3,500 5,300 1,890

3,500 5,300 1,890

4,500 4,500 450

4,500 4,500 450

4,500 4,500 1,250

4,500 4,500 1,250

4,500 4,500 700

4,900 4,650 1,350

4,270 4,440 1,260

3,000 3,200 400

2,500 3,500 2,200

- 2,500 -

1,200 3,500 2,200

- 2,400 400

- 2,500 -

1,200 3,500 2,200

2,500 3,500 2,200

2,500 3,500 2,200

2,500 3,500 2,200

2,500 3,500 2,200

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.*Available in Duo-Pak Cartridges only.

Product(Color)

Key Features Mix Ratio(Volume)

B:A

ApproximateViscosity

75°F (24°C)(cps)

ApproximateMixed Worklifeat 75°F (24°C)

ApproximateTime to Handling

Strength at 75°F (24°C)

AverageT-Peel at

75°F (24°C)(piw) -67°F 75°F 180°F

(-55°C) (24°C) (82°C)

Overlap Shear (psi)

8

To speed production and reliably assemble plastic and rubber, super fast curing Rite-Lok™ Cyanoacrylate Adhesives reach handling strength in 3-30 seconds. Also bond EPDM and other hard-to-bond substrates with confidence.

For coil termination, high temperature Rite-Lok™ Cyanoacrylate Adhesive HT700 resists continuous temperature up to 223°F (106°C) and intermittent exposure as high as 250°F (121°C).

For visual appeal, Rite-Lok™ Cyanoacrylate Adhesive LO100 is a low blooming formulation that bonds the plastic riser into a lipstick casing without chlorosis (white residue at the joint). Low odor reduces the need for sophisticated ventilation equipment.

With more than 30 Rite-Lok™ Cyanoacrylate Adhesives, you have choices for application success with surfaces that are dissimilar, porous, non-porous, rough, smooth, oily, clean, low surface energy, high energy, and more.

Consider one of the engineered grade Rite-Lok™ Cyanoacrylate Adhesives for productivity and performance in bonding difficult-to-bond plastics and rubbers to themselves or in combination with metals or composites.

Withauniquepolymer,rubber-toughenedRite-Lok™CyanoacrylateAdhesivescuretoaflexiblebondlinebetweendissimilarmaterialstomaximizeresistancetoimpact,peel,andthermalrecycling.Chooselowviscosityforclose-fittingpartsorhighviscosity for gap filling.


Rite-Lok™ Cyanoacrylate AdhesivesChoices for instant performanceand productivity...flexible bond line, low bloom, low odor, more

Known as instant adhesives, Rite-Lok™Cyanoacrylate Adhesives offer more than arange of seconds-fast bonding for substratesranging from metal to plastic, wood torubber. These liquid and gel formulationsgive you a wide selection of other propertiesto help improve production and end use:

• Superfastcuring• Lowodor• Lowblooming• Hightemperatureresistance• Rubber-toughenedforimpactresistance• Flexibletoresistvibration• Engineeredgradeforhard-to-bondplastics and rubbers• Optimizedmetalbonding• Bondinginsensitivesurfaces• Gapfilling

9


Product Information:

Full Cure (hours)

24

24

24

24

24

24

24

24

24

Product

SF100

LO100

PR851

PR54

EC100

SB95

SI1500

PR10

HT700

Typical Use

Fast cure, high strength with EPDM and other elastomers

Low-medium viscosity for fitting parts fitting parts

Medium viscosity with some gap filling

Fast cure, gel viscosity for max gap filling

General purpose, fast curing

Low viscosity for close fitting parts

High viscosity for gap filling

High viscosity for gap filling

Medium viscosity with some gap filling

Color

Clear

Clear

Clear

Clear

Clear

Clear

Clear

Black

Clear

Markets

Automotive, appliance, leather working, hand tools, electronics, power tools

Cosmetic cases, appearance-critical applications, black substrates, close-up bonding

Automotive, appliance, hand tools, electronics, power tools

Automotive, appliance, electronics, hand tools, power tools

Automotive, general bonding, consumerproducts, toys, rubber/plastic assembly

Woodworking, luggage and fabric, hobby, costume jewelry, leather

Woodworking, luggage and fabric, hobby, costume jewelry, leather

Automotive, appliance, electric motors, hand tools, electronics, power tools

Appliance, electronics, electric motors,automotive, transformers

Chemical Typical

Ethyl Hybrid

Methoxyethyl

Ethyl Hybrid

Ethyl Hybrid

Ethyl

Ethyl Hybrid

Ethyl Hybrid

Ethyl Hybrid

Ethyl Hybrid

Type Viscosity (cps)

100

100

300

Gel

100

40

1500

3500

700

Temperature Range

-65° to 180°F(-54° to 82°C)

-65° to 160°F(-54° to 71°C)

-65° to 160°F(-54° to 71°C)

-65° to 180°F(-54° to 82°C)

-65° to 180°F(-54° to 82°C)

-65° to 180°F(-54° to 82°C)

-65° to 180°F(-54° to 82°C)

Continuous -65° to 200°F(-54° to 93°C)Intermittent-65° to 225°F(-54° to 107°C)

Continuous-65° to 223°F(-54° to 106°C)Intermittent-65° to 250°F(-54° to 121°C)

Time to Handling

3-30 sec.

10-60 sec.

10-35 sec.

3-60 sec.

10-40 sec.

2-20 sec.

5-60 sec.

20-90 sec.

15-40 sec.

Super Fast Cyanoacrylate Adhesives

Low Odor Cyanoacrylate Adhesives

Flexible Cyanoacrylate Adhesives

Engineered Grade Cyanoacrylate Adhesives

Surface Insensitive Cyanoacrylate Adhesives

General Purpose Cyanoacrylate Adhesives

Cyanoacrylate Primers, Activators, and Debonders

Rubber-Toughened Cyanoacrylate Adhesives

High Temperature Cyanoacrylate Adhesives

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Cyanoacrylate accelerator with isopropyl alcohol formulation for insensitive plastics, cosmetically critical bond lines, and medical applications.

Cyanoacrylate debonder for cleanup.

Cyanoacrylate polyolefin primer for very fast bonding of difficult-to-bond polyethylene and polypropylene.

Adhesion promoter for use with silicone, Santoprene®, Viton® and EPDM.

California compliant version of AC78 (acetone based).

Cyanoacrylate general purpose accelerator will not attack plastics.

Cyanoacrylateacetone-basedacceleratorflashesoffrapidly;excellentadhesion;overspraymayattacksomeplastics.

AC12

AC68

AC77

AC78

AC79

AC113

AC452

10

Rite-Lok™ Threadlockers fill and seal threads completely to help stop corrosion, rust, and leaks. Securely hold even dissimilar metals.

Rite-Lok™ Retaining Compounds readily tighten tolerances in worn bearing seats, keyways, splines, tapers, shims, gears, and shafts. Fill voids completely to seal out moisture.

Rite-Lok™ Gasket Makers eliminate pre-cut or compression gaskets, or hold pre-cut gaskets in place during production. Seal without shimming effect or creeping.

Withafastandeasysqueeze,Rite-Lok™PipeSealantseliminate the cost and problems of shredding tapes, O-rings, and other mechanical sealants.

Tosavethecostofleakingfluidorgas,Rite-Lok™PipeSealants cure quickly to a tight, continuous seal without the creep and shrinkage of pastes.

Rite-Lok™ Threadlockers on threaded metal fasteners help keep production equipment up and running. You save the cost and time of disruptive, unscheduled downtime due to nuts, bolts, and screws that vibrate loose in such areas as gear housings and motor mounts.


Rite-Lok™ Anaerobic AdhesivesThe easy choice for running a tight operation

When you need secure tight fits and seals to keep production up and running, Rite-Lok™Anaerobic Adhesives offer a wide selection of properties to help you save the time and cost of disruptive, unscheduled downtime due to leaks and loose fasteners.

For threadlocking, sealing, retaining, and gasketing, application is fast and easy with justatargetedsqueezeofabottleortube.Inthe absence of oxygen and in the presence of metal, the anaerobic formulation cures quickly to a tough plastic that fills, seals, and secures.

Rite-Lok™ Threadlockers weld fasteners in place for blind holes and thru holes and prevent loosening from vibration.

Rite-Lok™ Pipe Sealants seal instantly to stop leaks when applied to the threads or compression fittings of most metal or certainplastic pipes.

Rite-Lok™ Retaining Compounds bond andseal non-threaded cylindrical assemblies.

Rite-Lok™ Gasket Makers fill voids between metalflangesandcuretoatight,rigidorflexibleseal.

11

Seal to OperatingPressure (hours)

Pipe Sealant Anaerobic Adhesives

PS65

PS67

Product

Product

Product

Typical Use

Typical Use

Typical Use

Cured State

Full Cured(hours)

Note: The technical information and data should be considered representative only and should not be used for specification purposes.1 Hand tool for removal 2 Heat and hand tool for removal


Product

Product

TL22

TL42

TL43

TL62

TL71

TL72

TL77

TL90

GM15

RT40

AC471

AC649

3989

Typical Use

Typical Use

Screwlock – Low removal torque for small fasteners less than a 1/4” (6mm) (HTR1)

Nutlock – Medium strength, general purpose (HTR1)

Oil tolerant, medium strength general purpose (HTR1)

Studlock – High strength with controlled torque tension (HHR2)

Permanent studlock for bolts and studs up to 1” (25mm) (HHR2)

High temperature studlock with gap filling for larger diameter coarse threaded parts (HHR2)

Heavy duty permanent for fasteners up to 1.5” (38mm) with coarse threads (HHR2)

Penetrating adhesive for pre-assembled fasteners and porosity sealing of welds (HHR2)

General purpose for applications requiring easy disassembly

Fast curing paste sealant for inactive surfaces such as stainless steel

White

Generalpurpose;flexibletowithstandvibration

Securesalltypesandsizesofbearings,shaftsandcylindrical parts

Fast-actingsurfacecleanerandprimerforusewithallanaerobicadhesives;sevendaypartlifeforpre-application

Acetone-basedgreenprimerforinactiveorverycoldsurfaces;30daypartlifeforpre-application

3M™Scotch-Weld™AnaerobicActivatortoacceleratecuring;drytime30-60seconds;solvent-based(flammableacetone)

Color

Color

Color

Color

Purple

Blue

Red

Green

Purple

Green

Size

Size

Size

Size

Size

50 ml tube250 ml tube

50, 250 ml btl.1 liter pipette

50, 250 ml btl.

50, 250 ml btl.1, 14 liter btl.


50, 250 ml btl.1 liter btl.


50, 250 ml btl.1 liter btl.




2fl.oz./1gal.btl.

2,8fl.oz./1gal.btl.

4.5fl.oz.





1200

1200

3300

1600

500

7000

7000

20

Paste NA 4

Paste

600

Temperature Range

Temperature Range

Temperature Range

Temperature Range

Full Cured (hours)

-65° to 300°F(-54° to 149°C)

-65° to 450°F(-54° to 232°C)

-65° to 300°F(-54° to 149°C)

-65° to 300°F(-54° to 149°C)

-65° to 300°F(-54° to 149°C)

-65° to 400°F(-54° to 204°C)

-65° to 300°F(-54° to 149°C)

-65° to 400°F(-54° to 204°C)

24

Flexible

Flexible

Time toHanding

Time toHanding

Time toHanding

Time toHanding

<20 Min.

<60 Min.

<20 Min.

1-2 hours(15 min. - 2 hrs)

10 -15 min.

Threadlocker Anaerobic Adhesives

Gasket Maker Anaerobic Adhesives


Retaining Compound Anaerobic Adhesives

Anaerobic Adhesives Primers

12

For bonding the guide to a drawer bottom, 3M™ Scotch-Weld™ Hot Melt Adhesive 3738 provides high delivery rate and long bonding range to meet production requirements.

For versatility in P.O.P. assembly, 3M™ Scotch-Weld™ Hot Melt Adhesives bond a variety of plastics, woods, and light gauge metals.

For economical package sealing, 3M™ Scotch-Weld™ Hot Melt Adhesive 3762 is a versatile formulation with 35-second bonding range for production speed. Variety of tips for package types.

3M™ Non-Structural Adhesives

3M™ Scotch-Weld™ Hot Melt Applicator LT with 3M low temperature (265°F/129°C) adhesive effectively bonds heat-sensitive substrates such as styrene foam to itself, corrugated, or other surfaces without damaging the foam.

3M™ Scotch-Weld™ Hot Melt Adhesives and Applicators

Other Non-Structural Adhesives include

The 3M systems approach tohelp you improve productivityand lower costs

3M™ Scotch-Weld™ Hot Melt Adhesives and Applicators are advanced hand-held systems to help you improve productivity, lower cost, and minimizewaste.

Adhesives are 100% solids thermoplastic resins thatbecomefluidwhenheatedandquicklywetthe bonding surface. They cool, harden, and reach bond strength in seconds. You can move assemblies immediately to keep production flowing.Thishelpseliminateclamps,fixturingand drying, and saves time, energy and space.

Each adhesive is designed and preciselymanufactured for efficient use in one of the portable 3M™ Scotch-Weld™ Hot Melt Applicators. Bond wood, plastic, foam, fabric, cardboard, and more.

• 3M™ Scotch-Weld™ Plastic Adhesives

• 3M™ Scotch-Weld™ Rubber and Gasket Adhesives

• 3M™ Insulation and Light-Duty Adhesives

13

3M™ Scotch-Weld™ Contact Adhesives

3M™ Fastbond™ Contact Adhesives & Cylinder Spray Adhesives


3M™ Adhesives that are GREENGUARD™ Certified

3M’s commitment to the green movement extends far beyond GREENGUARD Certified adhesives. Our line of high-performance green products also includes a variety of high solids/low-VOC adhesives. So whatever your application, 3M has an adhesive that can help you meet your green goals and make long termeconomic sense.

GREENGUARD™ Certified includes

• 3M™Scotch-Weld™CylinderSpray Adhesive 94CA – conveniently packaged, low-VOC, solvent-based contact adhesive for laminating

• 3M™Fastbond™PressureSensitive Adhesive 4224NF – pressure sensitive water-based adhesive for foam, fabric and carpeting

• 3M™Fastbond™ContactAdhesive 30NF/30H – the industry standard in water-based contact adhesives

• 3M™Fastbond™FoamAdhesive100– fast-setting water-based adhesive for foam bonding

• 3M™Fastbond™InsulationAdhesive 49 – fast-setting, pressure-sensitive water-based adhesive for lightweight bonding

• 3M™Fastbond™ContactAdhesive 2000NF – immediate-bonding waterbased contact adhesive for laminating

Fastbond is the 3M trademark on a continually growing line of water-based adhesives. For example, 3M™ Fastbond™ Foam Adhesive 100 is a one-part, water-dispersed formulation for bonding many porous substrates to porous or non-porous substrates with minimal dry time.

For HPL countertop assembly, 3M™ Scotch-Weld™ Cylinder Spray Adhesive 94 CA dries quickly to reach postformable strength in 1-5 minutes. 1-15 minute open time providesflexibilityinassemblyspeed.Formulatedspecificallywithlowtelegraphingfor thin veneers and glossy laminates.

3M™ Fastbond™ Contact Adhesive30NF in pourable quart andone gallon plastic containers,5-gallon pail, and 52-gallon drum

Product Description SolidsWeight

(Approx.)

ConsistencyFlashPoint

(ClosedCup)

ColorDry Film

ApplicationMethod

BondingRange

Thinliquid

Thinliquid

30 minutesmaximum

30 minutesmaximum

•Rapidbuildup to a very high strength bond for metal •Resistsheat and continuous •Meets MIL-A-21366A, MMM-A-121

•Lowersolids, lower viscosity version of 1357 for automatic spray

1357

1357L

Brush,Spray

Spray

Gray- green, Light

Yellow

Gray- green

25%

18%

5361

5361

1991

1991

422

422

-14°F(-26°C)

-14°F

(-26°C)

Overlap ShearStrength (PSI)

Peel Strength (PIW)

75°F(24°C)

180°F(82°C)

75°F(24°C)


1 Birch plywood to birch plywood @ 0.1 inches/minute separation rate.2 Canvas to cold rolled steel @ 2.0 inches/minute separation rate.3M™ Hi-Strength 90 Bulk Adhesive is available in 5-gallon and 55-gallon containers. See page 43 for features and details.

Contact Adhesives

14

3M™ Polyurethane and Hybrid Adhesives & SealantsThe Power Line – Alternatives for bonding, filling, sealing, waterproofing and more

3M™ Polyurethane and Hybrid Adhesives & Sealants are advanced, one-part formulations that require no mixing or special application tools. 3M’s POWER Line products cure with atmospheric moisture to form durable, resilient, long-lasting bonds ideal for:

• Truck,trailer,busandothervehiclepanel mounting

• MarineOEMdeck-to-hulljoining,through-hull fastening, deck fitting and more

• Roofflashings,through-wallpipeandcable sealing and other construction applications

• Concretesealingandexpansionjointfilling

• Marineandspecialtyvehiclewindowbonding andglazing

• Manyotherapplicationsinawiderangeof industries

Fromtrailerrooftofloor,polyurethane3M™Scotch-Seal™AdhesiveSealant560moisturecuresrapidlytoaflexibleseal/bondbetweenexteriorskinsandmetalframework,andwoodflooringandframework.Tensilestrengthofupto580psiisenoughtoreplace mechanical fasteners in many situations.

3M™ Marine Adhesive Sealant 5200 Fast Cure cures completelyinonly24hourstoastrongflexiblesealforapplications above or below the waterline such as hull and stern joints, hull to deck seams, marine hardware and more.

3M™ 4000UVHybrid AdhesiveSealant Fast Cure•Veryhighstrength•ExcellentUV resistance for glazingapplications•Above/below waterline use•LowVOC•20-minuteskintime

3M™ 525 PolyurethaneConstruction Sealant

•Excellentforconcretesealing•Extremelypliableandflexible•90+minuteskintime

3M™ 535 PolyurethaneConstruction Sealant

•Excellentsealerfor concreteandflashing•Paintable•90-minuteskintime

3M™ 540 PolyurethaneSealant

•Excellentcosmeticsealer•Paintable•Smokeandflamerated•90-minuteskintime

3M™ 550 PolyurethaneAdhesive Sealant Fast Cure

•Multi-purposeadhesivesealant•Paintable•Above/belowwaterlineuse•60-minuteskintime

3M™ 551 PolyurethaneAdhesive Sealant

•Multi-purpose adhesive sealant•Mediumstrength•2-3hourskintime

3M™ 560 PolyurethaneAdhesive Sealant

•Panel-bonding adhesive•Veryhighstrength•Smokeandflame rated•50-minuteskintime

3M™ 5010 PolyurethaneMulti-Purpose Adhesive

•Minorgapfilling•Versatile,fast- grabbing, high strength adhesive•Excellentwater resistance•3-minuteskintime

3M™ 5200PolyurethaneAdhesive Sealant•Veryhighstrength•Watertightbonds•Above/below waterline use•48-hourskintime

3M™ 590 OEMPolyurethane GlassAdhesive Sealant•Structuralglass bonding•Crashtested (FMVSS 212)•3-hourdrive- away time•30-minuteskintime

3M™ 740Hybrid Sealant

•Excellentcosmetic sealant•ExcellentUV resistance•LowVOC•50-minuteskintime

3M™ 760 HybridAdhesive Sealant

•Excellentadhesion•Paintablewhenwet•Above/below waterline use•LowVOC•30-minuteskintime


15


At the touch of a finger – bonding power for substrates from paper to metal.

3M aerosol adhesives go to the job and arealways ready when needed. Only a finger’stouch puts a job-matched formulation to work on paper, plastic, cardboard, foam, metal, and more. With fast tack, long bonding range, and little or no soak-in,

3M™ Super 77™ Multipurpose Spray Adhesive is a versatile tool for bonding lightweight materials that include fabrics, plastics, soft foams, paper, cardboard, and thin gauge metals.

3M™ Hi-Strength 90 Spray Adhesive typically bonds edge banding in 60 seconds compared to 15-20 minutes for many typical bulk contact adhesives. Strength increases to an ultimate 230 psi in shear and 25 piw in peel.

3M™FoamFast74SprayAdhesivequicklybondsflexibleurethane or latex foams to themselves and many other materials. Bond reaches foam-tearing strength with a soft,non-dimpling bond line.

Product Features NetWeight(Oz.-

Grams)

PeelStrength3

(PIW)

OverlapShear

Strength2

(PSI)

HeatResistance

in °F2

CACompliant5

Sq. Ft.Coverage @ 1 gram dry

wt/sq.ft (per can)1

%Solids

SprayPattern

OneSurface

TwoSurface

Bonding Range

15.1

22

9.4

13.5

25

19.1

12.9

13

18

74

106

27

70

119

97

70

65

76

11

9

4

10

5

7

16

13

25

170

180

110

230

150

190

300

250

240

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

•Repositionablewithaggressivetack•Bondpolyethylenefilm,foamandcarpet•Blue•Fasttackwithfoam-tearingstrength•Softnon-dimplingglueline•ClearorOrange•“Tape-like”PSAbonds•Nobleeding,stainingorwrinkling•Clear•Multi-purposewithhightemperatureresistance•Strongone-surfacebonds•Clear•Highcoverage,lowsoak-in•Fast,aggressivetackforbondingmany lightweight materials•Clear•Bondsmostinsulation,includingexpanded polystyrene and extruded polystyrene•Willnotattackfoamboard•Clear•Neoprene-basedcontactadhesivewith plasticizerresistance•Bondssupportedvinyl,leather,mostrubber, most plastics, laminate and wood•Yellow•Fast,highperformancecontactbondstrength•Adhereswood,highpreesurelaminate,metal, polyethylene, polypropylene and more •Translucent•Highstrengthwoodtolaminatebonding•Clear

Blue 72 SprayAdhesive

Foam Fast 74Spray Adhesive

Repositionable75 Spray Adhesive

Hi-Tack 76 SprayAdhesive

Super 77MultipurposeSpray Adhesive

Polystyrene Foam Insulation 78 Spray Adhesive

Rubber & Vinyl 80Spray Adhesive

Hi-Strength 90Spray Adhesive

Hi-Strength 94WoodworkingLaminate SprayAdhesive

1 min -8 hrs

30 sec -15 min

15 sec -1 hr

2 min -10 min

15 sec -15 min

1 min -15 min

NR

NR

NR

1 min -1 wk

30 sec -15 min

15 sec -3 hrs

2 min -1 hrs

15 sec -30 min

1 min -15 min

3 min -30 min

1 min -10 min

1 min -30 min

Up to 100

Up to 300

Up to 100

Up to 300

Up to 300

Up to 300

Up to 600

Up to 600

Up to 300

VariableWeb

VariableWeb

Mist

VariableWeb

Mist

VariableWeb

Web

VariableWeb

VariableWeb

17.33 - 490

16.9 - 480

10.25 - 290

18.1 - 515

16.75 -475

17.9 - 508

19 - 539

17.6 - 500

14.8 - 420


1 1 g/sq ft of adhesive coverage may not be enough for a some products. Higher strength applications may need as much as 2.5 grams dry wt/sq ft. Convert sq ft coverage by dividing by 2.5.2 Testing based on ASTM D3163 with birch plywood, 1 inch overlap, 1.5 - 2.5 gm/sq.ft (dry adhesive wt.)3 Testing based on ASTM D1876-01 with coated canvas, pulled at 12 in/mn.4 SAFT Shear Adhesion Failure Test with birch plywood, 1 inch overlap, 100 grams used, temperature start at 90F and ramped 10F every 10 mn. until complete failure.5 California Compliant per California Air Resources Board Consumer Product Rules for Aerosol AdhesivesNR = Not Recommended


3M™ Aerosol Adhesives

16

3M™ Silicone Lubricant lubricates cutting tools and tables. Fast, easy application helps prevent buildup of adhesive, wax, inks, and paints. Won’t stain or become gummy.

Freeingrustednuts,bolts,andfrozenthreadedpartsareonlya few of the many applications for 3M™ 5-Way Penetrant.

Product

Silicone Lubricant

5-Way Penetrant

Citrus Base Cleaner

Adhesive Remover

Sticker and Marker Remover

Multi-Surface Wipes

•Lubricatescuttingtoolsandtables•Helpspreventbuildupofglues,wax,inks,paints•Won’tstainorbecomegummy•FDAlistedingredients*

•Penetrates,lubricates,demoisturizes,cleansandhelpspreventrust•Freesrusted,frozennuts•“Driesout”electricalapparatus•Inhibitscorrosionandpittingofmoldingdiesandextensionscrews

•Multi-purpose,citrus-scentedcleanerremovesgrease,dirt,oilandadhesiveoversprayfromequipment•Softensliquidadhesiveandtaperesidue

•Specificallyformulatedtoremoveadhesivefrommanysubstrateswithnoresidue•Citrus-scented•Alsoavailableinbulk(55,5,and1gallon)

•SameasaerosolAdhesiveRemoverbutmorepreciseapplicationwithpentip

•Convenient,pre-moistened,pleasantscent•Large,thickanddurableforcleaningwithlittleeffort•Noneedtorinseorwashhandsafteruse

Description Temperature Resistance

350°F (177°C)

N/A

N/A

N/A

N/A

N/A

*FDA Listed Ingredients: The ingredients of this product, when dried after application, are listed as indirect food contact additives when used with minimal opportunity for exposure.See 21 CFR 178.3570, 178.3910, and 181.28


3M™ Cleaners and LubricantsConvenience and a fistfulof work power for maintenanceand production

In thousands of factories and plants, theseaerosol chemicals are proven daily to savetime and effort in maintenance and production.Lubricating, cleaning, inhibiting rust, andother tough jobs become finger-touch easy.Compact container fits in a tool box to goreadily to any job site and can help youreduce storage space and cost. Withtargeted application you get more useableproduct for your money.

3M aerosol chemicals contain no methylenechloride,chlorofluorocarbons(CFCs),or1,1,1-trichlorethane (methyl chloroform).



17

Rubber or Acrylic Adhesive

3M tapes and fasteners feature advanced 3M rubber or acrylic adhesive formulations.Each has characteristics that affect production and end use performance.

Adhesive

Bonding Surface

Initial Contact (Minimal Contact) After Rubdown (More Contact) After Dwell Time (Excellent Contact)

Adhesive

Bonding Surface

Adhesive

Bonding Surface

Dwell Time – Hours

Adhe

sion

High

Low

Rubber

Acrylic

27844201

Finding the Optimum Tape

To help you make sure of finding the optimum tape for your particular application, you’ll want to consider several factors: rubber or acrylic adhesive, surface energy and contact, stress conditions, end use environment, and substrate characteristicssuchassize,rigidity,thickness,and weight.

Rubber Adhesives

High initial adhesion

Some adhesion buildup

Good shear strength

Moderate temperature resistance

Good solvent resistance

Fair UV resistance

Moderate durability

Acrylic Adhesives

Fair initial adhesion

Gradual adhesion buildup

High shear strength

High temperature resistance

Excellent solvent resistance

Excellent UV resistance

Excellent durability

Rubber vs. Acrylic AdhesiveBond Buildup On Metal Surfaces

Rubber or Acrylic Adhesive

To make rubber adhesives, natural or synthetic rubbers are made tacky by mixing with various compounds. Individual elements do notchange;componentsaresimplymixedtogether to produce an adhesive.

To make acrylic adhesives, plastic compounds aresynthesizedtoobtainspecificchemicalstructures that are tacky. Acrylics can be formulated to produce specific performance characteristics.

Adhesive Surface Contact

Applyingfirmpressuretothebondincreasesadhesiveflowandcontactformoresecurebonding.Time and temperature will typically further increase contact and adhesion values.

3M™ Bonding Tapes

Tape Selection Guide

18

Substrate characteristics

• Thinmaterial

• Flexiblematerialor small rigid parts

• Lightweight

• Thinbondline

•Thickmaterial

•Stifforrigidmaterial

•Mediumtoheavyweight

•Irregularsurfaces

•Gapfilling

• Sealing

Thin Tapes Thick Tapes

General performance characteristics of 3M tapes

Specific performance characteristics by 3M product line

3M™ Adhesive Transfer Tapes

•Thinnestbondlines

•Highshearstrengthadhesiveavailable

•Selecttapescanbedispensedwith Scotch® ATG Applicator for convenience

3M™ Double Coated Tapes

•Carrierforeasierhandling

•Dimensionalstability

•Manyofferremovability

3M™ Double Coated Foam Tapes



•Mountingandholdingforindoor applications

3M™ VHB™ Tapes



•Mounting,holdingandjoiningfor outdoor applications

•Highbondstrengthandenvironmental resistance

3M™ Bonding Tapes

Substrate characteristics thatdetermine thin or thick tape

You will find information on these two pages to help you narrow tape choices to two or three possibilities for evaluation and testing.

First of all, define the substrates you want to bond. All substrates have characteristics that determine how well a substrate can be bonded with a particular adhesive for performance in a specific environment. Substrate characteristics suchasthickness,rigidity,size,andweightwill help determine your choice between two general groupings of 3M tapes: thin or thick. Each group has general performance characteristics. Thin and thick tapes are thenfurthercategorizedintoproductlineseach differentiated by specific performance characteristics.

Depending on the tape line, a choice of 3Madhesive types is available to meet differentdesign, production, and end use requirements

19

3M™ Bonding Tapes

Adhesive Family Characteristics

100 High Temperature Acrylic 300 High Tack Acrylic 400 Acrylic Adhesive

100MP High Performance Acrylic

300FR Flame Retardant

420 Acrylic Adhesive

100HT Ultra High Temperature Acrylic300LSE Low Surface Energy Acrylic

430 Acrylic Adhesive

200MP High Performance Acrylic

300MP High Tack Acrylic

700 Series Synthetic Rubber

340 High Tack Acrylic

800 Series Natural Rubber

350 High Performance Acrylic

900R Miscellaneous Rubber Adhesive Group

375 High Performance

1000 Series Repositionable Acrylic

Screen Printable Adhesive

220 Industrial Acrylic

290 Low Outgassing Acrylic

• Upto450°Fshort-termheatresistanceand excellent solvent resistance.• Highpeelstrengthcomparedtootheracrylic formulations.• Exceptionalshearstrengthevenatelevated temperatures.• Exhibitslowoutgassingcharacteristics.

• Upto250°Fshort-termheatresistance.• Highinitialadhesionespeciallytolow surface energy plastics.• Quickflowingtospeedlaminationoftextured plastics, foams, fabrics, and coated papers.

• Upto250°Fshort-termheatresistance.• Goodlowtemperatureperformanceand peel strength on many surfaces.• Excellentadhesiontouncoatedpapers.• ClarityandUVresistanceforwindowlabel applications.

• Upto500°Fshort-termheatresistanceand outstanding solvent resistance.• Higherpeelstrengththanmostotheracrylic formulations.• Exceptionalshearstrengthevenatelevated temperatures.

• Meetsvariousflameretardancystandards such as UL94 V-O/2, F.A.R. 25.853, and FMVSS 302.• Similaradhesivepropertiestoadhesive 300 family.• Goodadhesiontoawidevarietyofsurfaces including LSE plastics, foams, and fabrics.

• Upto300°Fshort-termheatresistance.• Hightackadhesive.

• Upto550°Fshort-termheatresistanceand outstanding solvent resistance.• Higherpeelstrengththanmostotheracrylic formulations.• Exceptionalshearstrengthevenatelevated temperatures.

• Upto300°Fshort-termheatresistance.• Outstandingadhesiontolowsurfaceenergy plastics, powder coated paints, and lightly oiled metals.• Goodchemicalandhumidityresistance.

• Upto350°Fshort-termheatresistance.• Leadforhightemperaturesplicing.

• Upto400°Fshort-termheatresistanceand excellent solvent resistance.• Outstandingadhesiontometalandhigh surface energy plastics.• Excellentshearstrengthtoresistslippage and edge lifting.• Short-termrepositionabilityforplacement accuracy.

• Upto250°Fshort-termheatresistancefor automotive interior applications.• Designedespeciallytobondmostplastics and foams.• Economicalattachmentofgraphics.

• Upto200°Fshort-termheatresistance.• Goodadhesiontolowsurfaceenergy substrates.• Forindoorandroomtemperature applications.

• Upto180°Fshort-termheatresistance.• Excellentbondingtofoamandother substrates.• Hightack;mediumshear.

• Upto200°Fshort-termheatresistance.• Offersgoodadhesiontoavarietyof surfaces.• Forindoorandroomtemperature applications.

• Upto450°Fshort-termheatresistance.• Excellentsolventresistanceandadhesion to LSE materials.

• Excellentinitialadhesionandhighbondto a variety of foams.• Utilityrubber-basedadhesiveidealforthe foam fabricating industry.

• Upto300°Fshort-termheatresistance• Bondsawidevarietyofsubstrates• Goodinitialtack

• Goodholdingtomanysurfaces.• Cleanremoval.

• Forselectiveplacementofpressure sensitive adhesive using screen print technology.• EitherUVcurableorwater-basedare available.

• Upto350°Fshort-termheatresistanceand good chemical resistance.• Goodshearstrengthandchemicalresistance for general purpose industrial applications.• Goodadhesiontomostmetalandhigh surface energy plastics.

• Upto450°Fshort-termheatresistance.• ExceedsmostOEMspecificationsfor outgassing and long-term performance.• Highpeelstrengthcomparedtootheracrylic formulations.• Exceptionalshearstrengthevenatelevated temperatures.

20


3M™ Primers

3M™ VHB™ Tapes securely bond stainless steel scuff stripstoaluminumwingflapsdespiteextremeground-to-airtemperature swings of 150°F to -40°F (65°C to -40°C).

For assembly efficiency, die-cut pieces of 3M™ VHB™ Tapes bond components in a waterresistant video camera case. The foam conforms to help seal the unit.

Mirrored ceiling panels are held in place with 3M™ VHB™ Tapes rather than screws. This helps maintain a clean, smoothappearancewithoutdistortingthereflectivesurfaces.

For ease of assembly and precise fit, die-cut 3M™ VHB™ Tapes bond and seal components throughout a GPS unit.

3M™ VHB™ Tape bonds on contact with no drying time or fixturing and saves processing steps such as drilling, screwing, welding, cleanup, and refinishing.

Product

AP 111

Solvent

Isopropylalcohol (IPA)

Active Ingredients

Less than 5%by weight

VOC’s

5.91 lbs. /gallon(708 g/l)

Color

Clear

Flashpoint

52°F (11°C)

Coverage

19 m2/l (800 ft2/gal) based on .002” wet coating thickness depending on method of application.

Application Ideas

Promote better adhesion for bare metals and painted surfaces.

Replace rivets, screws and other mechanical fasteners

For more than 25 years, industries worldwidehave been using 3M™ VHB™ Tapes for highholding power in static and dynamic loads.Viscoelastic properties absorb shock anddistribute stress evenly for bonding powerthat helps eliminate mechanical fastening inmany jobs.

In the ever growing product line, there are3M™ VHB™ Tapes for bonding and sealingaluminum, steel, glass, painted and powdercoated surfaces, and plastics such as acrylicand polycarbonate. Flexibility compensatesfor differential thermal expansion so you caneven bond many dissimilar materials withconfidence.

3M™ VHB™ Tapes bond the lens on contact in a fish finder and seal against water, moisture, salt, and more. Bonding power eliminates mechanical fasteners for a smooth, clean surface. Viscoelastic properties help absorb shock and vibration for bond reliability.

3M™ Bonding Tapes

3M™ VHB™ Tapes

Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.

Product

AP 115

Solvent

Isopropylalcohol andwater

Active Ingredients

Less than 1%by weight

VOC’s

6.08 lbs. /gallon(728 g/l)

Color

Clear

Flashpoint

53°F (12°C)

Application Temp.

50°F - 100°F(10°C - 38°C)

Coverage

20-25sq.ft.per4fl.oz.bottle(1.8 - 2.3 sq. m per 118 ml bottle)

Application Ideas

Promote better adhesion for glass.

Product

Primer 94

Solids

6%

VOC’s

Approx. 6.3 lbs. /gal. (755 g/l)less H20 and exempt solvents

Color

Clear light yellow-clear dark orange

Flashpoint

-4°F (-20°C)0.C.

Viscosity

35+/-5cps

Coverage

600 sq. ft.(211 sq. m/l) per gallon

Application Ideas

Promote better adhesion for a variety of plastic surfaces such as polyethylene, polypropylene, ABS, PET/PBT blends.

21

3M™ VHB Tapes

•Clear,acrylicconstructionforjoining transparent material

•White,closed-cellacrylicfoamcarrier•Goodadhesiontopolypropyleneand many powder paints

•Clearadhesivetransfertape•Highshearstrengthadhesive•UL746C

Product Information:Co

nfor

mab

le F

oam

Tap

esCo

nfor

mab

le F

oam

Tap

esCl

ear

Application Ideas


* 5958FR meets FAR 25.853 (a) 12 sec – vertical burn, Appendix F, Part 1 (a) (ic).

ProductNumber

TapeThicknessw/o linerMils (mm)

Liner Type

Adhesive Type

Description TemperatureResistance

Minutes DaysHours Weeks

SolventResistance

RelativeAdhesion

HSE LSE

4926

4936

4936F

4941

4941F

4956

4956F

4991

4919F

4947F

4979F

5915

5925

5930

5952

5958FR*

5962

4943F

4957F

4611

4646

4655

4914

4920

4930

4950

4929

4949

4955

4959

4945

4946

4951

4932

4952

4905

4910

F9460 PC

F9469 PC

F9473 PC

A

A

F

A

D

A

F

F

F

F

F

D

D

D

D

D

D

C

C

D

D

D

A

A

A

A

C

C

C

C

A

B

C

A

A

D

D

E

E

E

15 (0.4)

25 (0.64)

25 (0.64)

45 (1.1)

45 (1.1)

62 (1.6)

62 (1.6)

90 (2.3)

25 (0.64)

45 (1.1)

62 (1.6)

16 (0.4)

25 (0.64)

32 (0.8)

45 (1.1)

40 (1.0)

62 (1.6)

45 (1.1)

62 (1.6)

45 (1.1)

25 (0.64)

62 (1.6)

10 (0.25)

15 (0.4)

25 (0.64)

45 (1.1)

25 (0.64)

45 (1.1)

80 (2.0)

120 (3.0)

45 (1.1)

45 (1.1)

45 (1.1)

25 (0.64)

45 (1.1)

20 (0.5)

40 (1.0)

2 (0.05)

5 (0.13)

10 (0.25)

•Gray,closed-cellacrylicfoamcarrier

•Conformable

•Goodadhesiontomanypaintedmetals

•Plasticizerresistantchannels.

•UL746C

•Blackversionof4936Ftape



Multi-purposeacrylic

Multi-purposeacrylic

Generalpurposeacrylic



Modifiedacrylic

Low-tempacrylic

Low-tempacrylic

LSE

100MP

300°F 200°F(149°C) (93°C)

High

High

High

High

High

High

High

High

High

High

High Med.

High Med.

High Low

High Low

High Low

High Low

High Low

High Low

High Low

High High

•Bondandsealpolycarbonatelensover LCD.•Bondandsealplasticwindowstopre- painted control panels/switch gear.•Mountvinylwiringductsandconduit channels.•Seamvinylbanners.

•Bondstoavarietyofplasticsandpaintsystems.•Variousbondingapplicationsforback-litsigns.•GoodadhesiontomanypaintedBond •Bondarchitecturalsignstoframes.• Bondpowderpaintedmetalstiffenerstooffice desks and file cabinets.

•Bondantennas.•Bondautomatictolltagstovehicle.

•Pre-powdercoatpaintapplications: hat channels and stiffeners.

•Attachstiffenersinairconditioners, office furniture and telecommunications equipment.

•Bondpowderpaintedmetalstiffenersto office desks and file cabinets.•Bondpolypropyleneandpolystyrene.

•Bonddecorativemetaltrim.•Bondflexiblecircuitstoaluminum rigidizersorheatsinks.

•Attachvinyltrim.•Bondvinylextrusions.

•Mountbacklittranslucentsigns.•Edge-bondresinfilledglass.

•Lowtemperatureinstalledproducts.

•Black,closed-cellacrylicfoamcarrier• VeryconformableVariousbonding•Goodadhesiontomanypainted surfaces, including powder coated paint•UL746C

•Darkgray,closed-cellacrylic foam carrier •Hightemperatureresistanceacrylic•UL746C

•GrayConformablefoam•Applyaslowas32°F(0°C)

•White,closed-cellacrylicfoamcarrier•All-purposeadhesiveacrylicequipment.•UL746C

•White,closed-cellacrylicfoamcarrier•Plasticizerresistant

•Filmlinerversionof4945•UL746C

•White,closed-cellacrylicfoamcarrier•Applyaslowas32˚F(0˚C)

•Blackversionof4930

•Blackversionof4950

•White,closed-cellacrylicfoamcarrier•All-purposeadhesive•UL746C

Tran

sfer

300°F 200°F(149°C) (93°C)

300°F 200°F(149°C) (93°C)

300°F 200°F(149°C) (93°C)

300°F 200°F(149°C) (93°C)

300°F 200°F(149°C) (93°C)

500°F 300°F(260°C) (149°C)

300°F 200°F(149°C) (93°C)

200°F 160°F(93°C) (71°C)

400°F 300°F(232°C) (149°C)

450°F 300°F(204°C) (149°C)

300°F 200°F(149°C) (93°C)

250°F 200°F(121°C) (93°C)

Liner Types:A – 3 mil 54# Densified Kraft PaperB – 5 mil Clear Polyethylene FilmC – 2 mil Polyester FilmD – 5 mil Red Polyethylene FilmE – 4 mil 58# Polycoated Kraft PaperF – 5 mil Red Printed Polyethylene Film

Relative Adhesion:HSE – High Surface EnergyLSE – Low Surface Energy

Multi Purpose Acrylic: Bonds to a wide range of materials including metals, glass, and high and medium surface energy plastics and paints. Resistsmigrationofplasticizersinvinylsubstrates.

Modified Acrylic: Bonds to medium low surface energy paints and plastics, including many powder coated paints in addition to the substrates listed with the multi-purpose acrylic adhesive (except plasticizedvinyl).

General Purpose Acrylic: Bonds to most higher surface energy substrates including metal, glass, and high surface energy plastics.

Low Temperature Acrylic: Bonds down to 32° F (0°C) compared to 50°F(10°C) for most acrylic adhesives. Bonds most high surface energy substrates including metal, glass, and high surface energy plastics.

Low Surface Energy: High performance synthetic adhesive bonds to manylower surface energy substrates, including many plastics and powdercoated paints, plus smooth general purpose substrates.

100MP: Bonds with higher peel strength than most other acrylicformulations. Up to 500°F (260°C) short term heat resistance.

3M™ Bonding Tapes

22

3M™ VHB™ Tapes for SignsReliable and immediate bonding

For indoor and outdoor signage, 3M™ VHB™Tapes hold immediately without the workof screws and the mess and curing time ofliquid adhesives.

•Bondmetals,plastics,glass,foamboard, and more•Invisiblefasteningforsmooth,attractive surfaces 3M™ VHB™ Tape provides durable bonding in outdoor applications.

Clear 3M™VHB™ Tape permanently bonds aluminum letters to glass and appears almost invisible from behind the pane.

3M™ VHB™ Tape

3M™ VHB™Tape (silaneprimer used on glass)

Glass

Aluminum letter

Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.

UnpaintedAluminum and Steel

Acrylic,Polycarbonate

Expanded RigidPVC Board

FlexibleVinyl

Unpainted Aluminum and Steel

Painted Surfaces (drywall, metal, wood, concrete)

Acrylic, Polycarbonate

Glass

Transparent Applications

5952

5952

5952

5952

4910

5952

5952

5952

5952

4910

5952

5952

5952

5952

-

4910

4910

4910

4910

-

3M™ Bonding Tapes

23


3M™ Double Coated Foam Tapes for MountingFlexible foam carriers fill gapsand help bond irregular surfaces

In bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area. Depending on the specific tape, the result is a bond line that seals, cushions and damps vibration, resists impact, withstands a wide temperature range, and provides good insulating qualities. To meet your requirements, select from rubber or acrylic adhesive, and a choice of different foam carriers: urethane, vinyl, elastomeric, polyethylene, or acrylic.

To replace screws and liquid adhesives, 3M™ Multipurpose Mounting Tape 4016 bonds immediately to many indoor surfaces, even permanently mounting a plastic soap dispenser to a mirror.

3M™ Double Coated Urethane Foam Tapes bond plastic signs to painted cinder block. The foam fills gaps between irregular surfaces. Various foam thicknesses are available for surface conformance based on the degree of roughness.

To permanently mount a coat rack to a textured wall, 3M™ Extra Thick Multipurpose Mounting Tape 4008 bonds on contact and fills gaps between the surfaces.

3M™ Double Coated Polyethylene Foam Tapes effectively bond plastic extrusion price channels to grocery shelves.

Uret

hane

Poly

ethy

lene

Viny

lAc

rylic

3M™ Bonding Tapes

ApplicationIdeas

Bond acoustic panels to walls. Mount air fresheners.Mount soap dispensers.Mount interior signs and nameplates.Attach wire clips to various surfaces.Mount electrical channel to wall.

Mount indoor signs, nameplates and wall corner protectors to irregular surfaces.

Attach hooks, wire clips and racks. Mount retail shelf price channels.Mount pen holders.

Mount nameplates on awards and novelties.Point of purchase displays and signs.

Removable P.O.P. displays.Signs.Exhibits and trade shows.Nameplates.


ProductNumber

40044008401640264032

4052

4056

4085

4408

44164432

44624466

44924496

4658F

TapeThicknessMils (mm)

250 (6.4)125 (3.2)62 (1.6)62 (1.6)31 (0.8)

31 (0.8)

62 (1.6)

45 (1.1)

125 (3.2)

62 (1.6)31 (0.8)

31 (0.8)62 (1.6)

31 (0.8)62 (1.6)

31 (0.8)

Liner Type

A

E

A

B

C

D

Adhesive Type

100

100

740

430

745

430

100

Description

• Off-white,open-cellurethane foam carrier •Highshearadhesivewith high temperature resistance

•Blackversionof4032tape

•Blackversionof4016and 4026 tapes

•Off-white,open-cellurethane foam carrier •Hightackadhesive

•Black,closed-cellvinyl foam carrier

•Whiteorblack,closed-cellvinyl foam carrier

•Whiteorblack,closed-cell polyethylene foam carrier •Hightackadhesive

•Whiteorblack,closed-cell polyethylene foam carrier •Highshearadhesivewithhigh temperature resistance

•Clearclosedfoamacrylic removable foam tape•Cleanremovabilityfrommany substrates

TemperatureResistanceMinutes DaysHours Weeks

380°F 220°F(193°C) (104°C)

380°F 220°F(193°C) (104°C)

200°F 125°F(93°C) (52°C)

200°F 150°F(93°C) (66°C)

158°F 120°F(70°C) (49°C)

180°F 158°F(82°C) (70°C)

212°F 175°F(100°C) (80°C)

Resistance

Medium

Medium

Medium

Medium

Medium

Medium

High

Relative Adhesion HSE LSE

High Low

High Low

High High

High Low

High High

High Low

High Low

Liner Types:

A – 3 mil 62# Densified Kraft paper – Green plaid

B – 3 mil Densified Kraft paper – White

C – 4 mil 58# Polycoated Kraft paper – Tan

D – 2 mil Polyester film – Clear

E – 3 mil Densified Kraft paper – Tan

Relative Adhesion:

HSE – High Surface Energy

LSE – Low Surface Energy

24

A variety of carriers for easy handling and dispensing

3M™ Double Coated Tapes

3M™ Double Coated Tapes are engineered with adhesive on both sides of paper, film or tissue. This increases the dimensional stability of the adhesive for easy handling and application.

Depending on your production volume, you can apply tape by hand or with automatic high-volume dispensers. Select paper, polyester film or other synthetic carriers to help meet your special needs. Different adhesives – rubber, silicone or acrylic – can be on opposite sides of the carrier to join different materials. Your choice of properties include high temperature resistance, conformability to irregular surfaces, high initial adhesion, high shear strength, and more.

With differential adhesive, the silicone adhesive side of 3M™ Double Coated Tape adheres to a silicone rubber keypad. Acrylic adhesive side adheres to a plastic base.

For precise fit, 3M™ Double Coated Tape is pre-applied tofoamgasketingmaterialsandthendie-cuttosize.Thishelps increase dimensional stability of the part to facilitate assembly.


3M™ Bonding Tapes


300°F 250°F(149°C) (121°C)

500°F 300°F (260°C) (149°C)

250°F 150°F (121°C) (65°C)

250°F 180°F (121°C) (82°C)

300°F 200°F (149°C) (93°C)

250°F 195°F (120°C) (90°C)

150°F 120°F (65°C) (49°C)

350°F 250°F (177°C) (121°C)

248°F 185°F (120°C) (85°C)

185°F 158°F (85°C) (70°C)

300°F 185°F (150°C) (93°C)

AdhesiveFamily

200MPHigh Perf

100HTLUltra HighTemp

300 HighStrength

300LSE HighStrength

300MP HighStrength

340 HighStrength

350 HighStrength

375 HighPerform-ance

ProductNumber

9492MP

9495MP

9077

444

9009

9019

9490LE

9495LE

9183

9690

9690B

9824

9828

9500PC

9086

9087

9088

9088FL


2.5 (0.06)

5.7 (0.14)

2.0 (0.05)

3.8 (0.10)

1.9 (0.05)

1.1 (0.03)

6.7 (0.17)

6.7 (0.17)

6.3 (0.16)

5.6 (0.14)

5.6 (0.14)

3.1 (0.08)

4 (0.10)

5.6 (0.14)

7.5 (0.17)

10.2 (0.22)

8.3 (0.22)

8.3 (0.22)

CarrierType*

PET

PET

Non-Woven

PET

PET

PET

PET

PET

Non-Woven

PET

PET

PET

PET

PET

Tissue

PVC

PET

PET

LinerType

58# PCK

58# PCK

Heat ResistantDK White

55# DK

55# DK

55# DK

58# PCK

58# PCK

DK White

83# PCK

83# PCK

55# DK

55# DK

61.5#PCK

GlassinePaper

GlassinePaper

GlassinePaper

PP

Description

•2.5milversionof9495MP

•Excellentpeelstrengthonhighsurface energy plastics and metals

• Excellentheatresistanceinhigh temperature environments. • Linerwithstandslead-freesolderreflow temperatures.

• Hightackacrylicadhesivewith densified kraft liner

•Thindoublecoatforapplications where thickness is critical

•Ultra-thindoublecoatforapplications where thickness is critical

•300MPadhesiveonfaceside, 300LSE adhesive on the other

•300LSEadhesiveonbothsides for low surface energy surfaces

• Hightensilestrengthnon-woventape with high strength adhesive, removable from many surfaces.

•Excellentadhesiontomostplastics and foams

• 9690witha0.5milblack polyester carrier

•Hightack,generalpurpose acrylic adhesive

•Hightack,acrylicadhesivewith good adhesion to many foams

•Highperformanceonawide array of surfaces

•Goodinitialtack

SolventResistance

High

High

Low

Low

Medium

Medium

High

Medium


High Low

High Low

High High

Med. Med.

High High

High High

High High

High High

ApplicationIdeas

• Automotivedecorativetrimattachment.

•Graphicattachment.•High-pressurelaminatebonding.

• Forhigherprocessingandoperating temperatures applications, Ideal for FPC attachments.

•Gasketattachment.•Goodadhesiontomostplastics.

•Gasketattachmentinhand-held devices and laptops.•Plasticfilmlamination/bonding.

•Gasketattachmenttolowsurface energy surfaces.

•Plasticextrusionattachment.

•Cleanlyremovableadhesivefor recycling parts.

•Foamlamination.•Gasketattachment.

• LEDlensattachmentforcellular phones and pagers.

•Generalpurposelaminating.• Foamlamination.•Gasketattachment.

• LEDlensattachmentforcellular phones and pagers.

•POPdisplays.•Metalfabrication.•Sportsequipment.• Indoor/outdoorsigns.

25

3M™ Double Coated Tapes (continued)

Relative Adhesion: HSE – High Surface Energy, LSE – Low Surface Energy*PET is polyester, PP is polypropylene.



3M™ Bonding Tapes

AdhesiveFamily

400MPAcrylic

420Acrylic

700SyntheticRubber

800NaturalRubber

900Misc.

Silicone

Misc.

ProductNumber

415

9420

9576/B/R/Y

9795

9795B

9377

9443NP

401M

401M

9816L9816M9816H

9817L9817M9817H

9731

4377-504377-85

9599

9448HK

9888T

9080HL

9941

CT-6348


4 (0.1)

4 (0.1)

4 (0.1)

5.6 (0.14)

5.6 (0.14)

11 (0.25)

6 (0.15)

9 (0.23)

6 (0.06)

3.5 (0.09)

3.3 (0.08)

5.5 (0.14)

2 (0.05)3.3 (0.085)

5 (0.2)

6.3 (0.16)

5.9 (0.15)

6.3 (0.16)

3.9 (0.10)

3.5 (0.09)

CarrierType*

PET

PET

PP

PET

PET

PP

HDPE

Paper

paper

PET

PET

Non-woven

Non-woven

Non-woven

Non-woven

Non-woven

Non-woven

LinerType

60# DK

60# DK

60# DK

83# PCK

83# PCK

58# PCK

62# DK

54# DK

54# DK

60#74# Kraft14pt board

60#74# Kraft14pt board

PET/PCK

PET/PCK

DK White

DK White

DK White

DK White

DK White

DK White

Description

• Hightackadhesiontopaperand many other surfaces

•415witha0.5milredcarrier

•Availableintransparent,black,redor yellow carrier

•Doublecoatedversionof3MTape9695 for foam lamination and graphic attachment

•Thinblackpolyestercarrierforimproved handling, die-cutting

•Flameretardantwithspecially formulated black acrylic based adhesive on one side and rubber based adhesive on the other.

•Hightackwithgoodadhesionto most plastics

•Thickflatstockpapercarrier

•Smoothadhesiveonbothsides

•Generalpurpose,hightack, rubber-based adhesive.

•Exposedsideisacrylic,linersideis rubber-based. Excellent quick stick and adhesion to high and low energy surfaces.

• Highperformanceacrylicadhesive/ silicone adhesive, double linered

• Thinnercaliperoptionsofacrylic/silicone adhesive, double linered.

•Highadhesiontoavarietyofmaterials• LowVOC

High adhesion to variety of materials (available in black color, 9448HKB).

Thin non-woven carrier for dimensional stability and improved handling.

General purpose strong bonding adhesive.

Thin caliper double-coated non-woven tape.

Thin caliper double-coated non-woven tape.


180°F 150°F(82°C) (65°C)

165°F 125°F(75°C) (52°C)

300°F 250°F(149°C) (121°C)

250°F 180°F(121°C) (82°C)

180°F 150°F(82°C) (65°C)

180°F 150°F(82°C) (65°C)

200°F 150°F(93°C) (65°C)

150°F 120°F(65°C) (49°C)

Acrylic: Acrylic: 220°F 175°F(105°C) (80°C)Rubber:175°F 120°F(80°C) (49°C)

350°F 250°F(177°C) (121°C)

300°F 250°F(149°C) (121°C)

200°F 180°F(93°C) (82°C)

248°F 176°F(120°C) (80°C)

248°F 176°F(120°C) (80°C)

250°F 195°F(120°C) (90°C)

180°F 150°F(82°C) (65°C)

180°F 150°F(82°C) (65°C)

SolventResistance

Medium

Medium

Medium

Medium

Medium

Medium

Medium

Medium

Medium

Medium

Medium

Medium

Medium

Low

Low


Med. Low

Med. Low

Med. Low

N/A N/A

High High

High Med.

High Med.

High High

High High

High High

High High

High High

High High

High Med.

Med. Low

Application Ideas

•Splicepapers,filmsandfoils.

•Splicing,corestarting,miscellaneous joint and bonding, hand tearable.

•LEDlensattachmentforcellphones.

•Carpetinstallationbondingcarpetto interiorfloorboards.

•Assemblecomputerinkcartridges.•Bondingpolyethylene.•Corestartingonmetalcores.

•Mountprintingplates.

•Corestarting/endtabbingofpapers, films and foils.

•Generalpurposefoamorrubber•laminating(60”)•Generalpurposelaminatingof Fabricated parts

•Siliconekeypadattachment.•Printertonercartridgerefurbishing.

•Siliconekeypadattachment.

•Suitableforautomotiveinterior applications.

•Signs,nameplates,foamsand gasket attachment.

•Foamlamination,generalpurpose attachment.

•Foamlamination,generalpurpose attachment.

•Generalpurposebonding, Point-of-purchase, excellent for foam/felt lamination.

•Generalpurposebonding,lowcaliper tape, paper/print applications.

26

3M™ Removable/Repositionable TapesVersatility for many substrates onon-off and open-close applications

3M™ Removable/Repositionable Tape seals hosiery bags for shipment and display but also lets the customer open and reclose the bag as necessary.

High tack side of 3M™ Removable/Repositionable Tape 9415 “permanently” adheres to cores for winding up paper or film. Low tack side releases the paper or film when unwinding.

Some 3M™ Removable/Repositionable Tapesfeature a “permanent” adhesive on one side of a film or tissue carrier and a removable/repositionable adhesive on the other side.

Other tapes in the line offer different levels of adhesion on each side. And others feature equal adhesive strength on each side for reliable attachment but with easy separation for repositioning or multiple openings and closings.You can join substrates that include glass, metals, wood, paper, painted surfaces, and many plastics.

With linered versions, you can initially join one side to a surface while the other side is covered with the liner, ready to be joined later to the second surface. Linerless versions are used for bonding both surfaces at the same time.“Permanent”

pressure sensitiveadhesive

Release liner

Carrier

Repositionablepressure sensitiveadhesive


3M™ Bonding Tapes

AdhesiveNumber

665

666

4451

4658F

9415PC

9416

9425

9425HT

9449S**

AdhesiveType

1070

1070

700

100

400/1000*

400/1000*

420/1050*

420/1050*

1000


2.5 (0.06)

3.5 (0.09)

32 (0.8)

31 (0.8)

2 (0.05)

1.5 (0.04)

5.5 (0.14)

5.0 (0.13)

0.4 (0.01)

LinerType

Linerless

LDPE

60# PCK

PET

78# PCK

78# PCK

58# PCK

58# PCK

55# DK

Description

•ClearUPVCfilmcarrier•Slightdifferentialtack

•ClearUPVCfilmcarrier•Slightdifferentialtack

•Polyethylenefoamwith synthetic rubber adhesive

•Clear,closedfoamacrylic foam tape

•1milpolyesterfilmcarrier•Hightack/lowtack

• Translucentwhitetissuecarrier•Hightack/lowtack

• ClearUPVCfilmcarrier• Hightack/mediumtack

• Hightack/mediumtack•PETfilmcarrier

• Laminatestovarioussubstratesto make them repositionable


125°F 100°F(52°C) (38°C)

125°F 100°F(52°C) (38°C)

150°F 120°F(66°C) (49°C)

212°F 175°F(100°C) (80°C)

180°F 150°F(82°C) (65°C)

180°F 150°F(82°C) (65°C)

125°F 100°F(52°C) (38°C)

250°F 200°F(121°C) (93°C)

150°F 120°F(66°C) (49°C)

SolventResistance

Medium

Medium

Medium

High

Low

Low

Low

High

Low

HSE LSE

High Low

Med. Med.

High Med.

High Low

Med./ Low Low

High Low

High Low

Med. Med.

Low Low

Rem

ovab

le/R

epos

ition

able


*Secondnumberreflectsremovable/repositionableadhesiveside.**3M™ Adhesive Transfer Tape

ApplicationIdeas

•Closepolybags.Attachbottle outserts.•Attachmicroscopeslidestoholder.

•Attachchemicallysensitivefilmto test sticks.

• Optionoffoamifyouwant removability.• Temporarysign.

• RemovableP.O.P.displays,signs, exhibitions, and nameplates.

• Corestarting/endtabbing.Hold credit cards in mailers. Close envelopes.

• Removablelabelsandphotos.

• Closepolybagsandenvelopes. Core starting/end tabbing. Backlit signs. Attach labels, novelties, posters, P.O.P. displays.

• Sameas9425butwithhigher temperature performance.

• Easyremovalwithlittleorno residue.

27

Neat, precise application and high performance in a variety of applications

3M™ Adhesive Transfer Tapes are rolls of pressure sensitive adhesive pre-applied to a special release liner.

For application, the tape is simply pressed, adhesive side down, to a surface and the liner is peeled off.

A variety of adhesive properties and liners are available to meet requirements for applications such as nameplate attachment to high and low surface energy plastics, appliance graphic overlays that perform in high temperatures, foam gasketing, web splicing, and more.

With high cohesive strength, 3M™ Adhesive 200MP bonds aggressively with excellent temperature resistance. Meets the non-fogging specifications of the automotive industry.

Release liner

Pressuresensitiveadhesive

Forbondingflexiblevinylinsuchapplicationsasdoorgaskets, 3M™ Adhesive Transfer Tape F9465PC resists the effectofplasticizersthattendtomigratefromthevinyl.

3M™ Adhesive Transfer Tape 465 has the grab strength for manyprintingsplices,includingflyingsplices,zerospeedand manual overlap. Can be used with a variety of paper grades.

3M™ Lami nating Adhesive 300LSE is the solution for low energy surfaces such as polyolefins and powder coat paint. Graphics hold securely and stand up to tough environmental conditions.

3M™ Adhesive Transfer Tape 467MP is used to laminate metal foil to a circuit board to reduce interference on electronic circuitry.

3M™ Adhesive Transfer Tapes provide conformability in a variety of foam laminating applications. The acrylic adhesive also provides high shear strength and good environmentalaging properties.

For graphic beauty, 3M™ Acrylic Adhesive 100 attaches graphics in closed environments. With low odor, reduced outgassing and low fogging, it is used extensively in the automotive, aerospace, and appliance industries.

3M™ Adhesive Transfer Tapes

3M™ Bonding Tapes

28

Relative Adhesion:HSE – High Surface EnergyLSE – Low Surface Energy



3M™ Bonding Tapes

F9460PC

F9469PC

F9473PC

9082

9085

2 (0.05)

5 (0.13)

10 (0.25)

2 (0.05)

5 (0.13)

1 (0.025)

• Papersplicingandgeneraloffice and commercial joining.• Validationlabelsandparking permits on car windows.

AdhesiveFamily


LinerType

DescriptionProductNumber

TemperatureResistance

Minutes DaysHours Weeks

SolventResistance

RelativeAdhesion

HSE LSE

ApplicationIdeas

• Highshearstrength,hightemperature resistance•ULlisting746C

• Excellentheatresistanceinhightemperature environments

• Forapplicationsthatrequireboth higher processing and operating temperatures such as lead-free solderreflowprocesses.

• Adhesivetransfertapeversionof9077, Linerwithstandslead-freesolderreflow temperatures.

• Highperformance,hightemperature formulation•Rotarydie-cuttableliner

• Flameretardanttransfertapewithrotary die-cuttable liner

• Flameretardanttransfertapewith moisture-stable liner liner

• Whiteadhesive• Highopacity

• Hightack,excellentadhesiontoLSEplastics and foams

• 5.0milversionof9471fortexturedsurfaces

• Highbondtoplasticswithhightemperature holding

•Hightack,highshearandhightemperature performance•ExcellentadhesiontoLSEplastics

•Hightack•Excellentadhesiontomostpaperstocks•Flexibleto-60˚F

• Industrialjoiningandmetal fabrication.

• Forhigherprocessingandoperating temperatures applications such as lead-freesolderreflowprocesses.

• Generalindustrialjoining.• Industrystandardforgraphic attachment and die-cut parts.

• Automotive,aeropace,andbuilding construction.

• Gasketattachment,foamfabric and/or coated papers. High adhesion custom labels.

• Bondgraphicstopowdercoatings, LSE plastics and oily metal.• GeneralindustrialbondingofLSE materials.

• Laminatehighperformanceplastics and difficult substrates.• Splicemetalcoils.

High

High

High

High

High

High

Medium

Medium

Low

High Low

High Low

High Low

High Low

High Low

High High

High High

High High

High High

500°F 300°F (260°C) (149°C)

530°F 350°F (277°C) (17°C)

500°F 300°F (260°C) (149°C)

400°F 300°F (204°C) (149°C)

180°F 150°F (82°C) (65°C)

250°F 150°F (121°C) (65°C)

300°F 200°F (149°C) (93°C)

450°F 300°F (232°C) (149°C)

250°F 180°F (121°C) (82°C)

100MP 58# PCK

100HT White DK

100HTL 9079 2 (0.05)

467MP 2 (0.05)

468MP 5 (0.13)

Heat ResistantDK White

350 HighHolding

83#/58# PCK

300LSE HighStrength

300HighStrength

55# DK9459W 1.5 (0.04)

61# PCK9472 2 (0.05)

62# PCK

55# DK

300FRFlamRetardant

55# DK9372DKW 2 (0.05)

60# DK9471 2 (0.05)

83# PCK9372W

9375W

2 (0.12)

55# DK9458 1 (0.025)

55# DK

60# DK

50# PCK

200MPHigh Perf

58# PCK

400 Acrylic

8132LE

8153LE

9471LE

9472LE

2 (0.05)

3.5 (0.09)

2 (0.05)

5 (0.13)

9442

9445

9482PC

9485PC

2 (0.05)

5 (0.13)

2 (0.05)

5 (0.13)463

465

9457

2 (0.05)

29

3M™ Extended Liner TapesVersatile pressure sensitive adhesive on easy-to-remove liners

3M™ Extended Liner Tapes offer the adhesiveversatility of 3M tapes but with liners wider than the adhesive. This leaves an easy-to-lift edge for convenient and easy liner removal. With the variety of adhesives, you have a selection of performance characteristics such as high tack for coated papers and plastics, low tack for temporary attachment, high temperature resistance, and more. Apply manually or with equipment matched to your production volume requirements.

Depending on adhesive type, 3M™ Extended Liner Tapes are applied to envelopes, polybags, boxes, or tubes. User simply peels off liner to expose the adhesive for an immediate,secure closure.

3M™ Extended Liner Tapes are available with a release liner wider than the adhesive. This provides an easy-to-grab edge for convenient liner removal.

3M™ Extended Liner Tapes 450XL, 450EK and 465XL immediately bond product information “outserts” to polyethylene bottles. Holds tightly but can be cleanly removed.

A variety of automatic and semi-automatic equipment is available for higher volume applications. For example, apply tape to business forms, literature, bounce back and businessreply cards.

3M™ Bonding Tapes


AdhesiveType

340

400

600

760

770

ProductNumber

466XL

450EK

450XL

920XL

9926XL

465XL

9934XL

476XL

9925XL3


2 (0.05)

1 (0.025)

1 (0.025)

1 (0.025)

1 (0.025)

2 (0.05)

4 (0.10)

6 (0.16)

2.5 (0.065)

LinerType

62# DK white with black print

78# ExtensibleKraft whitewithout print

60# DK tan with green print

40# DK white with red print

62# DK white with red print

43# DK white with black print

Description

•Hightack•Permanent

•Generalpurpose

• HightacktoLSE materials

• Hightack,double coated film

• Tissuereinforced•Highinitialadhesion to a wide variety of materials

TemperatureResistance

Minutes Days Hours Weeks

180°F 150°F (82°C) (65°C)

250°F 180°F (121°C) (82°C)

150°F 120°F (65°C) (49°C)

150°F 120°F (65°C) (49°C)

150°F 100°F (65°C) (41°C)

SolventResistance

Medium

Medium

Medium

Medium

Low


High HIGH

Med. Low

High HIGH

High HIGH

Med. Med.

ApplicationIdeas

Coated papers and low surface energy (LSE) plastics. Overnight envelopes. Features an end-of-roll indicator tab for automated dispensing.

Pharmaceutical outsert attachment. For applications requiring a more tear resistant liner.

Pharmaceutical outsert attachment. General paper attachment.

Sealflapsonpoly-bagsandenvelopes.Pressuresensitive edging on business forms, literature, photos, posters, and labels.

Economical alternative for general paper-to-paper applications.

Sealflapsonovernightenvelopes.Pressuresensitiveedging on business forms. General commercial joining applications. For attaching materials that require more adhesive thickness. Larger outsert attachments.

P.O.P. displays. Difficult splicing applications, shelf talkers, price tags, polyethylene foam bonding. indirect food-contact applications.2

Heavy-duty sealing. Mounting of promotional items. Core starting. Closure of overnight boxes, tubes and envelopes. Indirect food-contact applications.2

General mounting. P.O.P. items. Attaching tags and labels. Core starting. Permanent bonding paper-to-paper, business forms, traffic tickets, novelty items and literature. Indirect food-contact applications.2


2 FDA acceptable dry ingredients listed as indirect food-contact additives when used in food packing with minimal opportunity for exposure.3 Non-liner side is adhesive coated full width.

Relative Adhesion:HSE – High Surface Energy,LSE – Low Surface Energy

30

Note: Technical information and data should be considered representative or typical only and should not be used for specification purposes.

Long life formulations for top to bottom reliability

3M offers a full range of adhesives with application-specific configurations for die-cut laminations, circuit layer assembly, switch spacers, metal dome placement, lead protection, and switch mounting.

With exceptionally high cohesive strength, 3M adhesives resist slippage, oozing,lifting,channeling,andbucklingforlong-termresistancetothestresses of switch activation. Adhesives also reliably resist high humidity, chemicals, and other challenging conditions.

3M™ Membrane Switch Adhesives

3M™ Membrane Switch Adhesives have been proven for over 20 years to resist high humidity and moisture, extreme temperature ranges, UV light, chemicals, household cleaners, and detergents.

Key Panel Graphics

3M™ Adhesive Transfer Tape

3M™ Membrane Switch Spacer

3M™ Adhesive Transfer Tape

Top Switch Circuit

Bottom Switch Circuit

Backer Board


3M™ Bonding Tapes

Description

Double-linered 300MP. High bond to low surface energy plastics.

Double-linered 467MP.

Double-linered 468MP.

Double-linered467MPwithheavylay-flatlinerforaddedstiffnessandeaseofhandling.

Double-linered468MPwithheavylay-flatlinerforaddedstiffness,controlledkiss-cutting and ease of handling.

Meetsrequirementsofmostkeyboardsandflexcircuitlaminations.

Same as 7945MP but with printed primary liner.

Same as 7953MS except with heavy liner.

Meetrequirementsofmostkeyboardsandflexcircuitlaminations.

Metallizedvaporcoatandwhitecolortoeliminatefloodcoats.

Sheet form of 7956MWS.

Meetrequirementsofmostkeyboardsandflexcircuitlaminations.

Thicker version of 7956MWS.

Sheet form of 7966MWS.

The9000seriesofproductshasalay-flatlineroneachsidewhichimprovesdie-cutting and handling of intricate die-cut parts.

Adhesiveononeside;whitepolyestercarrierforlightmanagement.

Adhesive on one side of clear polyester carrier.

Thick version of 7991MPW.

Single side spacers aid in the construction of membranes with circuitry, i.e. to protect leads, hold domes in place, or build custom spacers.

Liner Type

58# PCK/58# PCK

58# PCK/58# PCK

58# PCK/58# PCK

83# PCK/58# PCK

83# PCK/58# PCK

58# PCK/58# PCK

58# PCK/58# PCK

83# PCK

58# PCK/58# PCK

58# PCK

58# PCK/58# PCK

58# PCK/58# PCK

58# PCK/58# PCK

58# PCK/58# PCK

58# PCK

58# PCK/58# PCK

94# PCK/94# PCK

94# PCK/94# PCK

94# PCK/94# PCK

94# PCK/94# PCK

94# PCK/94# PCK

94# PCK

94# PCK

94# PCK

94# PCK

94# PCK

94# PCK

Product Number

7951

7952MP

7955MP

7962MP

7965MP

7945MP

7953MP

7953HL

7956MP

7956MWS

7956WDL

7957MP

7959MP

7961MP

7966MWS

7966WDL

9045MP

9056MP

9057MP

9059MP

9061MP

7991MPW

7992MP

7992MPW

7993MP

7995MP

7997MP

AdhesiveFamily

300MP

200MP

200MP

200MP

Tape orSpacerThickness

2 mils

2 mils

5 mils

2 mils

5 mils

5 mils

3.5 mils

3.5 mils

6 mils

6 mils

6 mils

7 mils

9 mils

11 mils

9 mils

9 mils

5 mils

6 mils

7 mils

9 mils

11 mils

2 mils

4 mils

4 mils

3 mils

5 mils

7 mils

Layer thickness(mils) Adhesive/Carrier/Adhesive

2/0/0

2/0/0

5/0/0

2/0/0

5/0/0

2/1/2

1.5/0.5/1.5

1.5/0.5/1.5

2/2/2

2/2/2

2/2/2

2/3/2

2/5/2

2/7/2

2/2/5

2/2/5

2/1/2

2/2/2

2/3/2

2/5/2

2/7/2

1/1/0

2/2/0

2/2/0

2/1/0

2/3/0

2/5/0Sing

le C

oate

d Sp

acer

sDo

uble

Coa

ted

Spac

ers

Doub

le-l

iner

ed A

dhes

ive

Tran

sfer

Tap

es

31

Finger touch application of pressure sensitive adhesive

Versatility, convenience and speed. That’swhat you get with the Scotch® ATG AdhesiveSystem for assembly operations in businessesranging from appliance and printing toP.O.P. and electronics. Readily bond, join,mount, or laminate materials such as paper,plastics, metal, foam and more.

With Scotch® ATG Adhesive Applicators,a touch of the finger triggers a quick,controlled application of Scotch® ATG Tapeat the same time as the liner rewinds intothe applicator. There is no mess and nocleanup. 3M advanced acrylic adhesive bondson contact and is formulated with a choiceof properties such as high temperatureresistance, differential tack, adhesion tolow surface energy plastic, and more.

Scotch® ATG Applicator 700 for 3/4”, 1/2”, and 1/4” wide tape (1/4” adapter purchased separately).

Scotch® ATG Applicator 714 for 1/4” wide tape.

Scotch® ATG Applicator 752 for 3/4”, 1/2”, and 1/4” wide tape (1/4” adapter purchased separately).

Scotch® ATG Applicator 3662 for 2” wide tape.

Save time and effort with the Scotch® ATG Adhesive System. You apply a precise strip of adhesive at the same time as the liner rewinds into the applicator.

Scotch® ATG 700 Applicator with Scotch® ATG Tape 924 makes fast work of folder assembly. Pressure sensitive adhesive bonds immediately and the folder pocket is ready to hold contents.

High performance Scotch® ATG Tape 926 bonds foam cushioning inside a portable power tool carrying case.

Leader permits fast,easy loading

Pressure sensitiveadhesive

Release liner

Scotch® ATG Adhesive Systems

3M™ Bonding Tapes


ApplicationIdeas

Attach fabric swatches in sample books.

Assemble point-of-purchase displays.Bond trim strips to furniture or luggage.Bond labels to plastic toys.Attach gaskets or foams.

Bond fabric or trim to window blinds.Splice aluminum coils.Bond foam insulation.Mount nameplates on award plaques.

Attach photos to layouts.Attach labels.

Seal pocket in folders.Bond mat board in picture frames.Splice paper, films, foils.General purpose bindery attaching.

Attach credit card in mailer.Core start/end tab paper, films and foils.Attach temporary labels.


Relative Adhesion: HSE – High Surface Energy, LSE – Low Surface Energy

AdhesiveType

300HighTack

350High Performance

400GeneralPurpose

400/1000Respositional

ProductNumber

976

969

926

970XL

924

987*

928


2 (0.05)

5 (0.13)

5 (0.13)

1 (0.025)

2 (0.05)

1.7 (0.040)

2 (0.05)

AdhesiveTransfer TapeEquivalent

927

950

9485PC

920XL

465

9498

9416

Description

•Hightack•Excellentadhesionto most plastics

•Highperformance• Excellenttemperature and solvent resistance

•Generalpurpose•Excellentadhesionto most paper stocks

•Differentialtack•Repositionable


250°F 150°F(121°C) (65°C)

450°F 300°F(232°C) (149°C)

250°F 180°F(121°C) (82°C)

180°F 150°F(82°C) (65°C)

Resistance

Medium

High

Medium

Medium


High High

High High

Med. Low

High/ Low/ Low Low

32

Holding power, line sharpness,and removal the way you want

In this simplified line, you will find a range of such characteristics as adhesive holding power, line sharpness, and clean removal to meet different application requirements for virtually every industrial and consumer application. 3M products also feature...

•Instantadhesionatatouch

•Easytearwithoutstretchingorpulling

•Controlledunwind...nottooeasyortoohard

•Conformabilitytostretchandadherearound curves

For attaching production records during assembly, warranty cards, or other temporary communications, 3M™ Masking Tapes 203, 2307, 200, and 2214 are cost-effective options.

Some masking tapes leave a ragged paint edge that may require rework. 3M™ Masking Tapes feature a thin, smooth backing for a sharp paint line.

A quick easy wrap of 3M™ Masking Tape bundles plastic or metal pipes and other items. Select from wide range of temperature resistance to meet storage or transport conditions.

With an engineered balance of crepe and adhesive, 3M™ Masking Tapes conform to compound surfaces and around curves without tearing the backing.

OtherOther

3M 3M

Product Adhesion to Steeloz./in.(N/100 mm)

Color(s) TotalThicknessmils (mm)

Tape Structure(Backing/Adhesive)

Tensile Strengthlbs./in. (N/100mm)

Elongation at Break %

TemperatureResistance°F (°C)

Comments


Low Temperature (Holding, Bundling and Sealing)

Medium Temperature (Paint Masking)

High Temperature (Paint Masking)

200

2214

2321

23081

2141

26931

4.4 (0.11)

5.2 (0.13)

6.3 (0.16)

5.3 (0.13)

6.7 (0.17)

8.5 (0.21)

25 (27)

22 (24)

41 (44)

35 (38)

27 (29)

46 (50)

19 (333)

22 (385)

27 (472)

22 (385)

24 (420)

26 (455)

8

9

8

10

10

10

Good instant adhesion.

Good for holding and bundling.

Good paint lines.

Good transfer resistance.

Stain resistant.

Veryaggressiveholding;excellentformulti-bake paint cycles.

Crepe Paper/Rubber

Crepe Paper/Rubber

Crepe Paper/Rubber

Crepe Paper/Rubbe

Crepe Paper/Rubber

Mini-Crepe Paper Synthetic

Tan

Tan

Tan

Tan

Tan

Tan

Up to 200°F (93°C)*

Up to 150°F (66°C)*

Up to 250°F (121°C)*

Up to 250°F (121°C)*

Up to 350°F (177°C)*

Up to 325°F (163°C)*


1Meets ASTM D6123/D6123M-97 *Up to 30 minutes

1Meets ASTM D6123/D6123M-97 *Up to 30 minutes

*Up to 30 minutes

3M™ Masking Tapes

3M™ Masking Solutions

33

Product Adhesion to Steeloz./in.(N/100 mm)

Color(s) TotalThicknessmils (mm)




TemperatureResistance°F (°C)

Comments


8979

8979N

3939

3900

3903

1910C

12.6 (0.33)

12.6 (0.33)

9.0 (0.23)

17.7 (0.19)

6.3 (0.16)

6.0 (0.15)

52 (57)

52 (57)

55 (60)

56 (62)

20 (21)

97(106)

36 (643)

36 (643)

25 (438)

22 (385)

14 (245)

11 (197)

21

21

17

15

150

12

Up to 6 months clean removal from most opaque surfaces indoors or outdoors. Will not delaminate or deteriorate for up to a year. Excellent water resistance. Unique slate blue color lets customer know they have used the right tape. Tested according to UL 723, HUD and BOCA Codes.

Samefeaturesas8979andmeetsASMENQA-1(supercedesANSI N45.2.2 and NRC 1.38 Para. 2C Div A3.5. (1)(A)) and MIL-STD-2041D(SH). Copy of certificate in each carton. Tested according to UL 723, HUD and BOCA Codes.

Variety of widths, versatile for many applications. Tested according to UL 723, HUD and BOCA Codes.

General purpose duct tape, temporary repairs, color-coding. Tested according to UL 723, HUD and BOCA Codes.

General purpose duct tape for color coding and marking. Embossed vinyl backing for easy tear.

Economical choice for sealing, holding and marsting.

Polyethylene overcloth scrim/rubber




Vinyl/rubber


Black, Olive,Slate blue

Slate blue, Red

Silver

Black, Blue,Olive, Red,Silver, White,Yellow

Black, Blue,Gray, Green,Red, White,Yellow

Black, Silver

Up to 200°F (93°C)

Up to 200°F (93°C)

Up to 200°F (93°C)

Up to 200°F (93°C)

Up to 250°F (121°C)

Up to 200°F (93°C)


3M™ Duct Tapes and Cloth TapesDependability and versatility forbundling, sealing, reinforcing, and more

Features include:•Handtearable•Hightensilestrength•Conformability

3M™ Performance Plus Duct Tape 8979 and nuclear grade 8979N... the best performing 3M™ Duct Tapes under the sun:

•Removecleanlyforuptosixmonthsfrom most opaque surfaces even after exposure to sun and outdoor weathering•Stayonforuptooneyearwithout deterioration•Savetimeandhassleofremovingstickyor dried-on residue•Strongwaterproofbackingresistswear, abrasion, moisture, and weathering

Write on the surfaces of many 3M™ Duct Tapes with pen or marker to leave a reminder or mark and identify works-in-progress, components, items bundled, and more.

For temporary capping of pipes or conduit, 3M™ Performance Plus Duct Tapes 8979 and 8979N conform and adhere to metal and plastic. Strong backing keeps out water and dirt for up to a year even in outdoor storage.

For a tight seal in many containment situations, 3M™ Performance Plus Duct Tape 8979 attaches heavy poly draping, closes cuffs, and then removes cleanly when the job is finished.

For bundling a wide variety of items, 3M™ Duct Tapes with natural rubber adhesive and high tensile strength backings adhere on contact and hold securely.

Waterproof backing of 3M™ Performance Plus Duct Tape 8979 resists moisture and rain for up to a year.

3M 8979Equal

WeatheringExposure

TypicalDuct Tape

Best in class tapes for indoor/outdoor use, offering clean removal and long term weatherability

Heavy duty tapes for demanding contractor, MRO and industrial job site applications

Utility and general use tapes for lighter duty applications

3M™ Masking Solutions

34

Product Adhesion toSteeloz./in.(N/100 mm)


TotalThicknessmils (mm)

BackingThicknessmils (mm)


Elongationat Break %

Comments


ASTM Test Method: D-3652 D-3330D-3652 D-3759 D-3759

Scotch® Box Sealing Tape

Tartan™ Box Sealing Tape

311

313

353

355

371

372

373

375

302

305

369

2.05 (.052)

2.55 (.065)

1.9 (.048)

3.43 (.089)

1.9 (.048)

2.2 (.056)

2.5 (.064)

3.1 (.079)

1.6 (.040)

1.8 (.046)

1.6 (.041)

Available in Clear and Tan




Available in Clear, Tan, Blue, Green, Orange, Red, White, and Yellow


Available in Clear, Tan, Blue, Green, Orange, Red, White, and Yellow





–

–

110

130

160

160

160

160

116

–

160

22 (24)

24 (26)

45 (49)

78 (85)

45 (44)

45 (49)

50 (55)

55 (60)

18 (20)

–

30 (32)

25 (438)

35 (613)

25 (437)

67 (1174)

22 (385)

26 (455)

30 (525)

35 (613)

23 (402)

21 (368)

19 (333)

1.1 (.028)

1.6 (.041)

1.0 (.025)

2.0 (.051)

1.2 (.030)

1.4 (.035)

1.6 (.041)

2.0 (.051)

1.0 (.025)

1.0 (.025)

1.0 (.025)

Polypropylene/Acrylic


Polyester/Synthetic Rubber

Polyester/Synthetic Rubber

Polypropylene/Synthetic Rubber








Dependability for food and beverage, electronics, e-fulfillment, pharmaceuticals, and more

With choices of polyester or polypropylenebackings and rubber or acrylic adhesives,you have dependability for a wide variety ofboxtypes,sizes,contents,handlingsituations, and storage conditions.

•Builttoughtoresistscorelinebreakingand center seam splitting even when boxes are handled rough

•Reliabilityevenwiththestressesofover packed or under packed boxes

•Quick,easyapplicationbyhand,manual dispensers, or 3M-Matic™ Case Sealers

•Choiceoflengths,widths,andcolorstomeet specific needs

In vacuum lift applications, Scotch® Box Sealing Tapes provide the necessary high initial holding power for secure closure.

Consistent quality of Scotch® Box Sealing Tapes means less interruptions on your packaging line and a favorable response at the receiving end.

Scotch® Box Sealing Tapes with polyester backing and synthetic rubber adhesive resist moisture in storage and shipping.

Scotch® and Tartan™ Box Sealing Tapes

3M™ Packaging Solutions

35

Product Total Thicknessmils (mm)

Backing Adhesive Adhesion toSteeloz/in(N/100mm)

Reinforcement Tensile Strengthlbs./in. (N/100mm)

Color Typical Use


ASTM Test Method: D-3330 D-3759 D-3759

Reinforced Strapping Tape

8896

8898

8915

8916

8916V

8919

Synthetic Rubber Resin





Natural Rubber Resin

Blue/Ivory

Blue/Ivory

Clear

Clear

Blue/Clear

Clear

Secure,StabilizeParts






160 (2800)

160 (2800)

170 (2980)

170 (2980)

210 (3678)

380 (6650)

4.6 (.12)

4.6 (.12)

6.0 (.15)

6.0 (.15)

6.8 (.17)

7.0 (.18)

75 (82)

75 (82)

60 (65)

65 (71)

75 (82)

70 (76)

None

None

Glass Yarn

Glass Yarn

Glass Yarn

Glass Yarn

TensilizedPolypropylene

TensilizedPolypropylene

Scotchpro™ Film

Scotchpro™ Film

Scotchpro™ Film

Scotchpro™ Film


Scotch® High Strength Tapes with Clean RemovalSecure and stabilize with no mess, no cleanup for appliances, furniture, electronics, and more

These high strength tapes not only hold securely but remove cleanly with no stickyresidue and tape slivers for cleanup.

•Easy,neatremovalfromunpaintedand painted metal, glass, vinyl, many plastics, and more

•Nostainingorghostingonmostsurfaces

•Choiceofstrongpolypropylenebackingor glass yarn reinforcement for the demands of various jobs, for example:

•Holdplasticrefrigeratordrawerswith Scotch® Film Strapping Tape 8896 •Keepheavywasherlidsorovendoors closed with Scotch® Filament Tape 8916V or 8919. •Securethelastlapofmetalcoilswith Scotch® Film Strapping Tape 8916

For refrigerators, Scotch®CleanRemovalTapesofferchoicesforsecuringandstabilizinginsideandout.Filamenttapesholddoors closed during transit, including stainless steel or powder coated. Film strapping tapes hold foam corners and rubber cords during shipment, and keep plastic drawers closed during manufacturing and through in-store display and home delivery.

Scotch® Film Strapping Tape 8898 bonds firmly to many plastics surfaces, such as those found with computers and peripherals, but leaves no sticky residue when removed.

For maximum impact resistance, Scotch® Filament Tape 8919 secures hinged doors of heavy appliances during shipping. Rubber resin adhesive resists staining on most surfaces.


36

Streamlined selection for application success

Up to 120 lbs./in. Up to 270 lbs./in. Up to 600 lbs./in.

Palletunitizing

Carpetbundling

PVC pipebundling

Rerodbundling

Graphicsfriendly

L and C-clipclosures

Metalcoiltabbing

Stabilizingloose parts

Product Tensile Strength*

8932** 95 lbs./in.Glass yarn reinforced

8934** 100 lbs./in.Glass yarn reinforced

860** 110 lbs./in.Tensilizedpolypropylene

862 120 lbs./in.Tensilizedpolypropylene,polypropylenereinforced


8898 160 lbs./in.Glass yarn reinforced


8651 175 lbs./in.Tensilizedpolypropylene,polypropylenereinforced,clear to see through

880/880NR 270 lbs./in.Polyester yarn reinforced, synthetic or natural rubber



898/898NR 380 lbs./in.Glass yarn reinforced, synthetic or natural rubber, first choice for L and C-clip closures of non-RSC boxes

8919 380 lbs./in.Glass yarn reinforced, clean removal

890NR 600 lbs./in.Glass yarn reinforced, natural rubber, high strengthfilament product

* ASTM Test Method D-3759 ** Tartan BrandNote: This technical information and data should be considered representative or typical only and should not be used for specification purposes.

Three questions to make strengthselection as easy as 1, 2, 3

1. What is your application? Bundling,palletizing,non-RSCboxclosing, color coding, reinforcing, coil tabbing, unitizing,combining,securing,other.

2. How much tensile strength do you need? Tensile strength is the tape’s resistance to breakage when pulled from opposite ends.

3. What type of adhesive do you need? Natural rubber for hard-to-stick-to surfaces, synthetic rubber for a variety of other surfaces, or clean removal.

Answers will probably take you to one of twelve 3M™ High Strength Tapes in the streamlined selection. If your application requires a unique solution or tape characteristic, please review the following pages.

Scotch® High Strength Filament Tapes


37

Scotch® Manual DispensersEasy dispensing for manufacturing, office, commercial, and retail jobs

All Scotch® Manual Dispensers for box sealing tapes, filament tapes, film tapes, label protection tapes, and pouch tapes are application-designed to meet the needs of the customer. Select from a variety of hand-held and heavy duty pull-and-tear table top dispensers. The following table also includes more specializeddispensers:definitelengthdispensers,semi-automaticfilamenttapedispensersandstretchabletapedispenserswhichdeliverthetapetotheproduct adhesive side up.

Scotch® Box Sealing Tape Dispensers Hand-held dispensers for use with specially formulated Scotch® Box Sealing Tapes.

Scotch® Filament Dispensers Hand-held dispensers for use with Scotch® High Strength Filament Tapes.

Scotch® Label Protection DispensersTabletop and portable dispensers designed specificallyfor 3M™ Label Protection and Pouch Tapes.

Scotch® Filament Tape DispenserHand-held dispenser for applying up to 18mm wide L-clip or C-clip of Scotch® High Strength Filament Tapes to close boxes.


Scotch® Filament Dispensers Semi-automatic dispensers for use with Scotch® High Strength Filament Tapes.

Scotch® Definite Length DispensersDispensers that deliver a uniform length of 3M™ Narrow Width Tape and Scotch® Filament Tapes every time quickly and easily.

Scotch® Bag SealersAppliestapeinanadhesive-to-adhesiveflagseal.


Scotch® Filament Dispensers Hand-held dispensers for use with Scotch® High Strength Filament Tapes.

Scotch® Heavy-Duty DispensersManual heavy-duty dispensers for use with 3M™ Narrow Width Film Tapes.

Scotch® Stretchable Tape DispenserHand-held dispenser with tensioning/stretching brake for use with 3M™ Stretchable Tapes.


H-123

H-190

H-192

H-183

H-128

H-130

H-133H-38

H-131

H-10

H-12

H-120

C-22

M-707

M-727M-96

M-920

P400

C-23

C-25

S-634

S-63

H-180

H-171

H-1755

H-129

H-128

H-122

H-320

38

Productivity with quick heightand width adjustments

With quick manual adjustment, these rugged units reliably and accurately seal runs of the samesizecartonsforavarietyofmarkets:foodand beverage, medical devices, pharmaceutical, electronics, retail, manufacturing, and distribution centers.

•Patented3M™AccuGlide™2+and3Taping Heads securely apply tape with low impact to protect even lightweight cases and their contents

120af – Adjustable side belt drive for sealing lightweight, narrow cases at up to 27/minute with 36-48mm tape. Automaticallyfoldstopminorandmajorflaps

700aks – Especially designed for sealing larger RSCs such as used in the appliance, electronics, and bedding industries. Forreliablesealing,theadjustablekingsizetopandbottombelt drive dependably conveys uniform cases up to 25.5” wide by 36” high at up to 40/minute. Includes 72mm tape width 3M™ AccuGlide™ 3 Taping Head.

800ab–Sealsbottomflapsonlyatupto40cases/minute.Adjustable side belt drive conveys a wide range of RSC sizesandweights:lengthsof6”andmore;4.25-21.5”widths;4.75”tounlimitedheights.

700a – Advanced features to seal uniform cases up to 40/minute. Dual masts with dual lead screws for stability and uniform height adjustments. Adjustable top and bottom belt drive system for reliable conveyance of heavier or tall/light boxes. Compression rollers position each box for precise tape sealing.

800asb – Same adjustable side belt drive as the 800a but designed for boxes as small as 6” long, 3.9” wide, and 2.75” high. Seals up to 30 cases/minute with 36mm tape.

200a – Durable bottom belt drive for up to 40 RSCs/minute. Dual masts with dual lead screws for stability and uniform height adjustments. Durable and cost efficient for basic case sealing – the most popular 3M-Matic™ Adjustable Case Sealer.

800a – Adjustable side belt drive for a wide range of RSC sizesandweights:lengthsof6”andmore;4.5-21.5”widths;4.75-24.5”heights.Sealsupto40cases/minutewith 36-48mm wide Scotch® Box Sealing Tapes.

800af–Automaticallyfoldstopminorandmajorflapsandtightly seals cases with 36-48mm tape at up to 28 cases/minute. Spring loaded drive with twin gear motors for heavy duty performance.

3M-Matic™ Adjustable Case Sealers


39

3M™ Package Attachment and Label Protection Products

3M™ Padded Tape Products

Keep shipping labels legible,clean, and attractive

3M™ Pouch Tapes feature a perimeter ofpressure sensitive adhesive around the edgeof non-tacky film. The adhesive sticks topackages creating a film pouch to contain andprotect shipping documents as well as smallparts and promotional items.

Read-through 3M™ Label Protection Tapeshold labels in place, keeping them legible,clean, and intact.

Application areas for both product lines:•Foodandbeverage•Generalmanufacturing•Mailrooms•Merchandisingandpromotions•Produce•Retail

Variety of tape products in pre-cut, easy-to-use strips on a pad

For application convenience, the quick tackbenefits of 3M pressure sensitive adhesivetape technology are available in severalpadded products.

Tape strips•Recouperageorbundling•Identificationandmarkingtags

Document Control – Rugged Scotch® Polyester Film tape 356 with long-aging adhesive protects labels in harsh or outdoor environments against water, UV, chemicals, and abrasion.

3M™ ScotchPad™ Custom Tape Pads 809G are available in awidevarietyofsizesandcolors.Theycanbeusedinmanyapplications including repairing of paper or poly bags.

Label Attachment and Protection – Scotch® Britegard™ Film Tape 823. Bright yellow directs the eye to the label. Best choice for protection of print on carbonless labels.

3M™ ScotchPad™ Custom Printed Tape Pads 809GP can be printed with a custom message in a wide variety ofsizes.

Attach premiums and small parts packets – Scotch® Custom Printed Pouch Tape 828CP securely attaches and seals product samples, small parts packets, merchandise, premiums, literature, catalogs, or brochures.

3M™ ScotchPad™ Hang Tabs are clear, sturdy plastic with pressure sensitive adhesive that sticks to most surfaces. Handy for shrinkwrap packages as well as in-store repair of damaged packaging such as torn punches in chipboard header cards.

Versatile and portable tape pads – 3M™ Scotchpad™ Pouch Tape Pad 830 is the same as Scotch® Pouch Tape 824 but in a compact, easy and ready-to-use pad. No dispenser needed.

3M™ ScotchPad™ Custom Printed Marking and Identification Tags 818CP hold up under rough handling for labeling, banding, pricing, or UPC applications.


40

Product Adhesion to Steeloz./in.

(N/100 mm)



TensileStrengthlbs./in.

(N/100 mm)

BackingThickness mils (mm)

Elongationat Break

%

Comments



ASTM Test Method: D-3652 D-3652 D-3330 D-3759 D-3759

Easy to apply and use handleswith custom branding andpromotional messages

Pressure sensitive adhesive at each end of afilm strip bonds securely on contact to thesides of a product or package, creating anadhesive-free loop between for carrying.Non-sticky paper loop can be customprinted with product information such asbar codes, logos, or promotional messages.

Loop area is available in colors or withcustom printing using up to 4 colors

Applications include bundling multi-packsof lightweight goods, carrying productssuch as small appliances, toys, and hardwareitems, combining and providing a handlefor awkward-to-carry items such as pillows,secure closure of “tuck-in” boxes (eg. bakerygoods) – all while providing a handle.

Weight capacity of 3M™ ScotchPad™ Carry Handles range from10-35poundsdependingonthehandlesizeandthelength of the adhesive contacting the product or package.

For multi-packs and awkward to hold packages and products. 3M™ ScotchPad™ Carry Handles add comfortable grab-and-go convenience as an added incentive for customers to buy.

With custom printing 3M™ ScotchPad™ Carry Handles build brand recognition and display UPCs, coupons, and special offers.

Synthetic rubber adhesive on each end of a 3M™ Carry Handle grips securely to plastic and many other product and package surfaces. Rugged polypropylene/paper handle conforms to contours for full strength bonding over the contact area.

Handles on a pad for peeland apply convenience.

3M™ ScotchPad™ Carry Handles


8325

8326

8327

8328

3.2 (.081)

3.2 (.081)

3.5 (.089)

3.5 (.089)

Custom printed carry handle

White, unprinted carry handle

Custom printed heavy duty carry handle

White, unprinted heavy duty carry handle

160

160

130

130

55 (61)

55 (61)

78 (85)

78 (85)

35 (613)

35 (613)

67 (174)

67 (174)

2.0 (.051)

2.0 (.051)

2.0 (.051)

2.0 (.051)

Polypropylene/Paper/Synthetic Rubber

Polypropylene/Paper/Synthetic Rubber

Polyester/Paper/Synthetic Rubber

Polyester/Paper/Synthetic Rubber

41

1A-20: Acrylic - high strength adhesion to high energy surface. R-25: Synthetic Rubber - ideal for low surface energy substrates. R-30: Natural Rubber - excellent adhesion to a wide variety of surfaces.260# (lb./ream) white silicone coated paper with printed 3M Bumpon Logo.


R-30R-30 A-20

62 (1.6)

31 (0.8)

125 (3.2)

62 (1.6)

31 (0.8)

70 Shore A

70 Shore A

70 Shore A

70 Shore A

70 Shore A

Natural Rubber(R-30) 3.6 (0.09)

Natural Rubber(R-30) 3.6 (0.09)

Synthetic Rubber (R-25)

2.0 (0.05)


2.0 (0.05)


2.0 (0.05)

Polyurethane

Polyurethane

Polyurethane

Polyurethane

Polyurethane

R-30R-30R-30R-30A-20R-30

R-30R-30

R-30R-30R-30

3M™ Bumpon™ Protective Products – Molded Shapes, Polyurethane RollstockTake the edge off noise, put an end to scratches

Wherever slamming, scratching, nicking, scuffing, sliding, vibration, or noise could be a problem for your product – or make your product a problem – 3M™ Bumpon™ Protective Products provide a margin of safety. You have a choice of permanently resilient pads, feet, buttons, strips, bumpers, or spacers.

•Pressuresensitiveadhesivesbondfastand permanently when pressed to most clean, dry, and smooth surfaces•Resilientelastomerwillnotdryout,rot,or embrittle;cushionsanddampsnoiseindefinitely•Highcoefficientoffrictionresistsskiddingon most surfaces•Containsnocorrosiveplasticizerorvulcanizing agent to chemically mar surfaces•Easytoapply:separatefromlinerand“bump- it-on” with no screws, rivets or application equipment

3M™ Bumpon™ Protective Product SJ5312 is a clear cylinder that blends with glass or acrylic cutting boards and similar applications requiring near invisibility. Resists yellowing with age.

3M™ Bumpon™ Protective Products rollstock is available in a wide range of lengths and widths with a choice of acrylic, rubber, and synthetic rubber adhesives for bonding to virtually any surface.

Product Information

Product

Product

SJ5012SJ5076SJ5312

SJ5816

SJ5832

SJ6208

SJ6216

SJ6232

SJ5003SJ5009SJ5017SJ5027SJ5306SJ5532

SJ5007SJ5008

SJ5018SJ5023SJ5514

Color

Color

White, Gray, Brown, BlackBlackTransparent

Black, Brown

Black, Brown

Black

Black

Black

White, Gray, Brown, BlackBlack, White, Gray, BrownWhite, Black, Gray, BrownBlack, Gray, BrownTransparentWhite, Black

White, BlackWhite, Gray, Brown, Black, TransparentWhite, Gray, Black, BrownWhite, Gray, Brown, BlackBlack, White, Gray, Brown

Adhesive1

Tape Construction

Backing Facestock Caliper mils (mm)

Shape

CylindricalCylindricalCylindrical

HemisphereHemisphereHemisphereHemisphereHemisphereHemisphere

Tapered SquareTapered Square

Tapered SquareTapered SquareTapered Square

0.500 (12.7)0.315 (8.0)0.140 (3.6)

0.440 (11.2)0.880 (22.4)0.750 (19.1) 0.630 (16.0)0.375 (9.5)1.880 (47.8)

0.413 (10.4)0.500 (12.7)

0.500 (12.7) 0.812 (20.6)0.812 (20.6)

0.140 (3.6)0.110 (2.8 )0.140 (3.6)

60# Paper2 2.0 (0.05)

60# Paper2 2.0 (0.05)

60# Paper2 3.6 (0.09)

60# Paper2 3.6 (0.09)

60# Paper2 3.6 (0.09)

0.200 (5.1)0.400 (10.2)0.380 (9.7)0.312 (7.9) 0.150 (3.8)0.660 (16.8)

0.098 (2.5)0.125 (3.1)

0.230 (5.8)0.300 (7.6)0.520 (13.2)

Width in. (mm)

707075

22

22

55

55

55

7070707570

7070

707070

Versatile foot style for use on high-energy surfaces.Flat top, nonskid for appliances and electronics.Universal color matching. Nonslip. Ideal for picture framing.

UL94HBrecognized.

UL94HBrecognized.

Fast bonding, permanent adhesion.UL94HBrecognized.



Good energy absorption on impact.Protects wall from door knob.Recessed center, like screw-in bumper.Cushions heaver items like glass or liftgate.Smaller, energy absorbing with small contact point.Large, ideal for door stops.

Nested on pad for fast removal.Popular, thin nonskid for appliances or electronics.

Larger height, smaller top surface for heat dissipation.For larger appliances and electronics.Larger, high profile for heat dissipation.

Comments

Comments

Height in. (mm)

Liner Type and Type Thickness mils (mm)

Adhesive Type andThickness mils (mm)

Product HardnessASTM D-2240

Hardness (Shore A)

Adhesion in Steeloz./0.5in.

Cylindrical

5800 Series

6200 Series

3M™ Surface Protection Solutions

TRANSPARENT

CLEAR

HEMISPHERE

CYLINDRICAL

SQUARE

HEXAGON

Hemisphere

Square

Molded Shapes

Polyurethane Rollstock

42

3M™ Clean-Walk Mats

3M™ Protective Tapes – Short Term

Capture dirt on contact before tracking it from one area to another

Between areas within a plant or between the plant and the office these adhesive mats capture dirt on contact from shoe soles, wheels, and other passing objects.

•Individuallytabbedsheetsremoveeasilyto expose a fresh sheet•Individuallynumberedsheetsensureone sheet removal at a time•Largeadhesiveareaallowstwofullsteps

Unframed mats adhere to most smooth, clean anddryfloorssuchastileorconcrete.Removescleanly.

Framed mats are adhered to a plastic frame. Frame’s nonskid back maintains position on carpet and other surfaces. Replacement pads/mats install easily to the reusable frame.

Short-term protection against scratching, marring, chipping, abrasion, and UV

These rugged 1 to 5 mil tapes adhere and conform to protect product surfaces during production, packaging, shipping and installation. Tack level varies depending on the tape. All remove cleanly once the product is in the hands of the end user.

A variety of backings are available and each offers key characteristics:

Polyethylene Tapes•Transparentwithgoodabrasionresistance•Cost-effective

UV Tapes•Transparentorbluewithenhancedoutdoor UV resistance

Carpet Tapes•Transparentwitheasyunwind

Cold Seal®* Tapes•Clearfilmsealstoitselfforpackagingsmall parts

Co-Extruded “A” Tapes•Punctureresistanceandbreakstrength surpass many typical LDPE films

Co-Extruded Black/White Tapes•UVresistanceupto6monthsPolyesterTapes•Bestchoiceforclaritywithexcellentheatand puncture resistance

Polypropylene Tapes•Goodresistancetoheat,abrasion,andUV

Topreservethecleanlinessandappearanceoffloorsandcarpets,3M™Clean-WalkMatsreducetheamountofdirtpassing between areas.

During manufacturing and transport, transparent 3M™ Polyethylene Protective Tapes protect many finished automotive interior surfaces from abrasion, nicks, and scratches. Clear acrylic adhesive holds with very low tack for easy removal.

To help ensure a scratch-free surface for the end user, 3M™ Co-Extruded “A” Tape is applied after final finishing to sinks, spas, and countertops prior to packaging. Enhanced abrasion and puncture resistance protects the surface through shipping and installation. Tape then removes cleanly.

Unframed Mats

Framed Mats


43

3M™ Protective Tapes – Short Term

2 (0.05)2 (0.05)3 (0.08)

3 (0.08)

4 (0.10)5 (0.13)

Product

210421263112

3125

41675112

4F794F94

31U26C/UV

2E93EZ

240425A10

44S56W


Polyethylene/AcrylicPolyethylene/AcrylicPolyethylene/Acrylic

Polyethylene/Acrylic

Polyethylene/AcrylicPolyethylene/Acrylic

Total Thicknessmils (mm)

Adhesion to Steel oz./in.width

173

5

183

1520

7

25

12

9

Very lowModerate

Low

Moderate

HighLow

Moderate

Very high

Very lowVery low

Moderate

HighHigh

450450450

450

450450

600600

450

600

600600

800

Tack Level

Glass. CRT screens. LED, LCD screens.Slightly textured plastics, steel garage doors, metal extrusions and painted building panels.Smooth, gloss, painted building panels.Premask for vinyl pinstriping, decals and emblems.Cut-to-length metal sheets in fabrication, shipping and storage.Semi-gloss, painted metals and plastic surfaces.Textured decorative laminates and vinyl. Woodgrain laminates, matte plastics.Mirror-finishstainless,specularanodizedaluminum.Automotive applications such as: paint mutilation, tail lights, lens covers and window glass.


Application Ideas

Based on ASTM Test Method: D-3652 D-3330 D-3759

Polyethylene Tapes

Nominal Results

4 (0.10)4 (0.10)

3 (0.08)

2 (0.05)

2 (0.05)3 (0.08)

4 (0.10)

Polyethylene/AcrylicPolyethylene/Acrylic




Co-Extruded/AcrylicCo-Extruded/Acrylic

Flame retardant carpet tape complies to F.A.R. 25.853 (appendix F, part 25).Flame retardant carpet tape complies with IMO resolution A-653 (16) for cruise lines.

Forflatfinishedvinylandaluminumwindowframes,flatfinishedpaintedmetalsandplastics.

Automotive carpets, fabric seals and headliners.

High-gloss coated metals, glass, CRT screens.Specularanodizedaluminum.Brightannealedorpolishedstainless.

White tape for painted metals, plastic surfaces and automotive clearcoat paint finishes.

Retardant Tapes

UV Tapes

Selected tapes are available in transparent, blue, white and black/white.** Value measured as a cohesive bond strength in units. Note:This technical information and data should be considered representative or typical only and should not be used for specification purposes.


Covered with 3M™ UV Protective Tape, plastic surfaces such as refrigerator dairy doors or vegetable crispers stay new looking through transit and display in the store.

3M™ Protective Tape applied to the metal control panel of a stove protects the paint against abrasion, scratches, and dirt during subsequent assembly steps, warehousing, and shipping.

3M™ UV Protective Tapes protect automotive mirror finishes from abrasion and marring. UV-stable backing resists the effect of UV exposure for up to 3 months.

Applied over automotive lights, 3M™ Co-Extruded Black/White Tapes offer UV resistance for up to 6 months while protecting the glass and other surfaces from abrasion and scratching

Carpet Tapes

Co-Extruded “A” Tapes

Polypropylene Tapes


44

Selection simplicity for a wide variety of applications

With more than 120 product solutions, the portfolio of 3M™ Specialty Tapes presents customers with numerous characteristics to evaluate in making the optimum choice for an application.

To help simplify and streamline the selection process, six products have been highlighted for their versatility. These Specialty Six solve 80% of customer application needs. The six represent the key backings that comprise much of the 3M™ Specialty Tapes line: glass cloth, metal foil, polyester, slick surface (PTFE), and vinyl.

Primary Customer Applications Key ProductKey Product Solutions

3M™ Polyester Tape 850

3M™ Aluminum Foil Tape 425



3M™ Glass Cloth Tape 361

3M™ Glass Cloth Tape 361

3M™ Damping Foil 2552

3M™ Vinyl Tape 471

3M™ PTFE Film Tape 5490




3M™ Aluminum Foil Tape 425

Shielding 3M™ Aluminum Foil Tape 425


SplicingReliably hold a seam together between two materials.

SealingReliably seal surfaces in many special or

unique applications.

EnhancingMark for color-coding, safety, or aesthetics to

enhance the workplace.

ShieldingShield sensitive surfaces from harsh chemicals,

and heat or cold.

ConductingEffectively conduct heat or cold from

one surface to another.

Reducing noiseMinimizethenoiseofvibrationorsurfaces

hitting or rubbing against each other.

3M™ Specialty Tapes

3M Specialty Solutions

45


Vinyl Tapes

Aluminum Foil Tapes

Polyester Tapes

Slick Surface Tapes

Damping Foils

Glass Cloth Tapes

• Easilyapplycolor-coding,markings,andidentificationtoaisles,lanes,hazardareas,

tools, and equipment

• “Colorthroughout”constructionresistsscrapes,wear,andchemicals

•Finelinepaintmasking

•Protectsurfacesagainstabrasionandchemicals

• Adddecorativetrimthatalsoreinforcesandseals

• Splicewithhighvisibility

• Sealrivetedseams

•Highthermalconductivityenhancesefficiencyofheatingorcooling

•Highheatreflectivitytoprotecttemperaturesensitivematerialsagainstheatdamageandhotspots

•Protectpartsfromflamedamage

•Sealandprotectfromdustandmoisture

•Solventresistanttosealandprotectsensitivesurfaces

•ResistUVdegradationforlong-termperformance

•Makebuttandothersplicesthatrequirehightensilestrengthandthincaliper

•Seal,protect,andreinforceinawidevarietyofapplications

•Color-codeordecoratewithlong-termholding

•Transparencywithcleanremovalandlong-termclarity

•Broadtemperaturerange

•Lowcoefficientoffrictionforaslippery,self-lubricatingsurface

•Wrapwebrollerswithaslippery,lowenergysurfaceforsmoothermaterialmovement

•Coverwebformeredgestominimizefrictionduringfolding

•Antistickforreadyreleaseandcleanupofhotplastic;preventplasticfilmfromstickingtoheatbar

•Protectsurfacesagainstheat,chemicals,andfriction

•Reducestructure-bornenoiseinmetalandcompositepanelsandsupportstructures

•Reducevibrationalfatiguetodecreasewearandtearonpartsandlowertheriskofpart

loosening and displacement

•Convertsvibrationalenergytonegligibleheatthatreadilydissipates

•Pressuresensitiveforeasyapplication

•Eliminatestiffenersinsomedesigns

•Effectivelydampwithaslittleas10%surfacecoverage

•Tensilestrength7xhigherthantypicalpolyestertapes

•Protectsurfacesagainstabrasionandhightemperatures

•Thermalspraymasking

•Splicefabricandothertexturedsurfaceswhenhightensilestrengthisnecessary

•ProtectagainsthightemperaturetopassFAAflameresistanceregulations

4

6

3

2

5

13M™

Vinyl Tape 471

3M™Aluminum Foil

Tape 425

3M™Polyester Film

Tape 850

3M™PTFE Film Tape

5490

3M™Damping Foil

2552

3M™Glass Cloth Tape

361


46

Forseamingandsealingpanelsinaircraftcargobays,3M™GlassClothTape398FRexceedsflameretardantstandardsF.A.R.25.853 (a) and F.A.R. 25.855 (d). Pressure sensitive acrylic adhesive bonds on contact to many surfaces. High adhesion is secure for extended periods. Rugged cloth surface resists wear from heavy bags.

High tensile strength with choice of other properties

With a choice of high tensile strength glass cloth and silicone, acrylic, or rubber adhesives, this line meets demanding applications for Aerospace, Automotive, Commercial Vehicle, Construction, Marine, and more.

Depending on the specific tape, you have achoice of characteristics:

•PassFAAflameresistanceregulations•Protectsurfacesagainstabrasion•Temperatureresistanceuptomorethan 450°F (232°C) for one hour – even higher for intermittent exposures

3M™ Traction Tape 5401 enhances friction on web rollers to help maintain constant traction and tension for the web material from start-up through wind-up.

With high tensile strength and rubber adhesive, 3M™ Glass Cloth Tape 365 reliably splices fabrics and other textured surfaces.

For thermal spray and plasma spray masking, 3M™ Glass Cloth Tape 361 with silicone adhesive performs reliably at up to450°F(232°C).PassesFAAflameresistanceregulations.

1 F.A.R. 25.853(a) 2 F.A.R. 25.855(d) Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.


TemperatureRange°F (°C)

ProductColor

361/White

398FR/White

398FRP/White

5401/Tan

Glass Cloth/Silicone

Glass Cloth/Acrylic(Film Liner)

Glass Cloth/Acrylic(Film Liner)

Fiberglass ReinforcedSilicone/Silicone

5.4 (0.14)

5.0 (0.13)

5.0 (0.13)

8 (0.2)

7.5 (0.19)

7.0 (0.18)

7.0 (0.18)

9.3 (0.24)

38 (42)

38 (52)

38 (52)

12 (13)

182 (3190)

130 (2452)

130 (2452)

220 (3853)

10

7

7

7

-65 to 450°F(-54 to 232°C)

-20 to 250°F(-29 to 121°C)

-20 to 250°F(-29 to 121°C)

Up to 300°F

General purpose glass cloth tape.1

Meets F.A.A. burn requirements. 1, 2

Skip-slit liner for case at application.

Printed backing version of 398FR tape.1, 2

Non-stick traction surface.(150°C)



CommentsTotalThicknessmils (mm)

Adhesionto Steeloz./in.(N/100 mm)

TensileStrengthlbs./in.(N/100 mm)


Glass Cloth Tapes


3M™ Glass Cloth Tapes


47

3M™ Metal Foil Tapes

3M™ Aluminum Foil Tape bonds on contact as heat shielding inside an oven door. Helps keep the exterior cool to the touch behind the handle and around the window perimeter.

Choice of high performancefoil tapes

With a choice of conformable backings and adhesives, this line of tapes meets demanding applications in Aerospace, Appliance, Transportation, Construction, Automotive, and MRO (Maintenance and Repair) segments.

3M™ Aluminum Foil Tapes•Resistflame,moisture,weather,UV degradation, and most chemicals•Thermallyconductiveforheating/cooling efficiency•Heatandlightreflective

3M™ Aluminum Foil Reinforced Tapes•Flexibleflame-resistantwrapfor wires and hoses•Longwearing,tearandpunctureresistant•Flameandheatresistant

3M™ Lead Foil Tapes•Electricallyconductive•Acidresistantforplatingmasking•RadiopaqueforX-raymarkers

With aggressive adhesive and dead soft aluminum, Scotch® Foil Tape 3311 seals and secures seams and joints for long-term durability. UL 723 Listed for duct sealing and general repairs.

With conformability and chemical resistance, 3M™ Aluminum Foil Tapes protect aircraft windows during harsh chemical paint stripping.

3M™ FSK Facing Tape 3320 is engineered specifically as a vapor retardant tape to seal mineral wool foil-faced insulation, bare sheet metal ducts, and blanket style fiberglass duct insulation.


1 Can be qualified to L-T-80B, SAE-AMS-T-23397 2 Meets U.L.723,Class L File R 7311 3 F.A.R.25.853 (a) 4 Meets U.L.746C File E122798Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.

HVAC & Refrigeration Aluminum Foil Tapes

Lead Foil Tapes

420

421

Lead/Rubber

Lead/Rubber

4.7 (0.12)

4.0 (0.10)

6.8 (0.17)

6.3 (0.16)

45 (49)

31 (34)

20 (350)

15 (263)

12

14

-60 to 225°F(-54 to 106°C)

-60 to 225°F(-54 to 106°C)

Linered plating tape.

Unlinered plating tape.



ProductColor

425

427

433

3311

Aluminum/Acrylic

Aluminum/Acrylic

Aluminum/Silicone

Aluminum/Rubber

2.8 (0.07)

2.8 (0.07)

2.0 (0.05)

2.0 (0.05)

4.6 (0.12)

4.6 (0.12)

3.6 (0.09)

3.6 (0.09)

47 (51)

50 (55)

40 (43.8)

90 (98)

30 (525)

30 (525)

20 (350)

17 (298)

8

8

3.5

3

-65 to 300°F(-54 to 149°C)

-65 to 300°F(-54 to 149°C)

-65 to 600°F(-54 to 316°C)

-10 to 180°F(-23 to 82°C)

Most versatile aluminum tape.1, 2, 3, 4

Linered version 425 tape. 2, 3, 4

MIL-T-47014.3

UL 723 listed, linered.







Premium Performance Aluminum Foil Tapes


48

For butt splices on many low surface energy materials such as polyethylene. 3M™ Super Bond Film Tape 396 provides the thin caliper, and tensile strength of polyester and high immediate adhesion and holding strength of rubber adhesive.

Thin caliper with long-term high dimensional strength

With a choice of thin backing calipers and adhesives, this line of tapes meets demanding applications for Graphic Arts, Photography, Metal Finishing, and Electronics. Applications range from splicing silicone-treated paper to low profile decorative trim.

•Backingcalipersfromasthinas0.9milup to 5 mils, all with very high dimensional strength

•Tensilestrengthsrangingfrom20lbs./in. (0.9 mil) to 150 lbs./in. (5 mils) – some of the strongest backings available

•Pressuresensitiveacrylic,rubber,silicone, and S/R blend adhesives to meet specific requirements. For example, acrylic with transparent backing for clarity and long-term holding;siliconeforhightemperaturesand cleanremoval;rubberforplatingchemical resistance

For marking splice location, 3M™ Polyester Tape 850 is available in red, black, white, silver, and gold. Transparent is also available to blend with the web stock. Pressure sensitive acrylic adhesive grabs on contact and holds butt splices securely. High tensile strength backing resists web handling stresses.

With thin caliper, high tensile strength polyester backing and the excellent shear strength of silicone adhesive, 3M™ Polyester Tape 8402 works well for butt splicing silicone-treated papers

3M™ Polyester Tapes


1L-T-100B 2A-A-59298 3F.A.R. 25.853 (a) Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.



ProductColor

396/Transparent

850/Transparent

850/White/Red/Blk

853/Transparent

Polyester/Rubber

Polyester/Acrylic

Polyester/Acrylic

Polyester/Acrylic

1.4 (0.04)

0.9 (0.02)

0.9 (0.02)

0.9 (0.02)

4.1 (0.10)

1.9 (0.05)

1.9 (0.05)

1.9 (0.05)

170 (190)

30 (33)

30 (33)

48 (52)

22 (24)

24 (26)

27 (30)

32 (35)

40 (44)

43 (47)

30 (33)

30 (33)

40 (44)

33 (36)

34 (595)

33 (578)

44 (772)

28 (490)

53 (928)

150 (2627)

30 (525)

30 (525)

55 (963)

48 (840)

100

120

150

115

130

130

100

100

110

83

43 (753)

25 (440)

28 (491)

24 (421)

140

120

120

102

40 to 200°F(4 to 93°C)-60 to 300°F(-50 to 150°C)-60 to 300°F(-50 to 150°C)-60 to 300°F(-50 to 150°C)

-60 to 300°F(-50 to 150°C)

-60 to 425°F(-50 to 218°C)

-60 to 425°F(-50 to 218°C)

-60 to 400°F(-50 to 204°C)

-60 to 400°F(-50 to 204°C)

-60 to 400°F(-50 to 204°C)

-60 to 400°F(-50 to 204°C)

-60 to 425°F(-50 to 218°C)

-60 to 425°F(-50 to 218°C)

-60 to 400°F(-50 to 204°C)

Adhesion to low energy surfaces.

Splicing, holding, sealing, highly transparent.3

Splicing, holding, decorating, color-coding, sealing.Solvent resistant adhesive.1, 2, 3

Splicing many release coated papers.

Adheres well to silicone.

Adheres well to silicone.

High temperature coating.



High temperature label protection.

High temperature applications.

High temperature applications.

Powder coat masking, economical high temperature applications.







General Industrial Tapes


Release Surface and Liner Splicing Tapes

8401/TranslucentCream

8402/Green

8403/Green

8901/Blue

8902/Blue

8905/Blue

8911/Transparent

8951/Blue

8952/8952L/Blue

8992/8992L/Green

Polyester/Siliconewith Rubber

Polyester/Silicone

Polyester/Silicone

Polyester/Silicone

Polyester/Silicone

Polyester/Silicone

Polyester/Silicone

Polyester/Silicone

Polyester/Silicone

Polyester/Silicone

1.0 (0.03)

0.9 (0.02)

1.5 (0.04)

0.9 (0.02)

2.0 (0.05)

5.0 (0.13)

1.0 (0.03)

1.0 (0.03)

2.0 (0.05)

2.0 (0.05)

1.9 (0.05)

1.8 (0.05)

2.3 (0.06)

2.6 (0.06)

3.4 (0.09)

6.5 (0.17)

2.7 (0.07)

2.7 (0.07)

3.5 (0.09)

3.3 (0.08)

49

3M™ Slick Surface Tapes

Corrugated boxes slide more easily down a chute lined with abrasion-resistant 3M™ UHMW-PE Tapes.

Low coefficients of friction withchoice of other characteristics

3M™ Slick Surface Tapes meet many applica-tion requirements for Printing, Aerospace, Auto-motive, and MRO (Maintenance and Repair).

3M™ PTFE Tapes•Self-lubricatingwithlowcoefficientoffriction to help improve web processing•Resistsupto400°F(204°C)forlong performance on heat sealing machines•Anti-stickforeasycleanupofhotplastic•Chemical-resistantbarrier•Silicone-freeadhesiveavailable

3M™ UHMW-PE Tapes•Abrasionresistanttoprotectchutes,guide rails, and containers from wear•Lowcoefficientoffrictionfor“slipplane” effect between surfaces to reduce noise•Anti-stickforreadyreleaseofmanyinksand adhesives

Conformable, self-lubricating 3M™ PTFE Tape 5480 helps the movement of web materials in many types of roller wrapping applications

For automotive noise reduction, 3M™ UHMW-PE Tape 5425 provides a “slip plane” effect between incompatible surfaces to help reduce squeaks and rattles.

In shrink wrapping operation, 3M™ PTFE Glass Cloth Tape 5451 helps protect the bar underneath where the hot wire seals the plastic film.

Note: All UHMW-PE tapes come on a paper liner. Note:This technical information and data should be considered representative or typical only and should not be used for specification purposes.



ProductColor

5151/Lt.Brown

5153/Lt.Brown

5451/Brown

5453/Brown

5180/Gray

5181/Gray

5480/Gray

5481/Gray

5490/Gray

5491/Gray

5498/Brown

PTFE GC/Silicone

PTFE GC/Silicone

PTFE GC/Silicone

PTFE GC/Silicone

PTFE/Silicone

PTFE/Silicone

PTFE/Silicone

PTFE/Silicone

PTFE/Silicone

PTFE/Silicone

PTFE/Rubber

3.0 (0.08)

5.3 (0.13)

3.2 (0.08)

6.0 (0.15)

2.0 (0.05)

5.0 (0.13)

2.0 (0.05)

5.0 (0.13)

2.0 (0.05)

5.0 (0.13)

2.0 (0.05)

4.5 (0.11)

6.8 (0.17)

5.6 (0.14)

8.2 (0.21)

3.5 (0.09)

6.5 (0.17)

3.7 (0.09)

6.8 (0.17)

3.7 (0.09)

6.7 (0.17)

4.0 (0.10)

30 (33)

35 (38)

28 (30.6)

55 (56)

25 (28)

35 (39)

20 (22)

32 (35)

27 (29)

35 (38)

48 (53)

100 (1760)

150 (2600)

100 (1760)

175 (3065)

30 (525)

75 (1300)

27 (473)

49 (858)

22 (385)

40 (700)

19 (332)

5

5

5

5

100

100

140

335

150

200

105

-100 to 400°F (-73 to 204°C)

-100 to 400°F (-73 to 204°C)

-100 to 400°F (-73 to 204°C)

-100 to 400°F (-73 to 204°C)







PTFE Tapes (Polytetrafluoroethylene)

Glass Cloth

Skived Film

Extruded Film


-65 to 400°F (-54 to 204°C)

-65 to 400°F (-54 to 204°C)

-65 to 400°F (-54 to 204°C)

-65 to 400°F (-54 to 204°C)

-65 to 400°F (-54 to 204°C)

-65 to 400°F (-54 to 204°C)

40 to 300°F (4 to 149°C)

General purpose.

General purpose.

Roller wrapping tape.

Heavy-duty roller wrapping tape.

Lay-flatbacking.

Lay-flatbacking.

Silicone-free adhesive.

275

300

100

175

175

175

General purpose.

General purpose.

Heat seal tape.

Heat seal tape.

Film

UHMW-PE Tapes (Ultra High Molecular Weight — Polyethylene)

6.7 (0.17)

11.7 (0.30)

4.5 (0.11)

7.0 (0.18)

6.5 (0.17)

5.0 (0.13)

26 (28)

26 (28)

30 (33)

75 (82)

75 (82)

50 (55)

30 (526)

55 (963)

45 (788)

40 (696)

40 (696)

40 (696)

-30 to 225°F (-34 to 107°C)

-30 to 225°F (-34 to 107°C)

-30 to 225°F (-34 to 107°C)

-30 to 225°F (-34 to 107°C)

-30 to 225°F (-34 to 107°C)

-30 to 225°F (-34 to 107°C)

General purpose tape.

Excellent abrasion resistance.

Solvent resistant adhesive.

High tack adhesive.

Black version 5430 tape.

Thin version 5430 tape.

5.0 (0.13)

10.0 (0.25)

3.0 (0.08)

5.0 (0.13)

5.0 (0.13)

3.0 (0.08)

5421/Transparent

5423/Translucent

5425/Transparent

5430/Transparent

9324/Black

9325/Transparent

UHMW-PE/Rubber

UHMW-PE/Rubber

UHMW-PE/Acrylic

UHMW-PE/Acrylic

UHMW-PE/Acrylic

UHMW-PE/Acrylic


50

3M™ Vinyl and Polyethylene TapesMark, identify, color-code,seal seams, and more

These rugged tapes adhere aggressively and remove cleanly from most surfaces for a wide variety of applications in Automotive, MRO (Maintenance and Repair), Construction, Marine, Commercial Vehicle, and other industries.

Applicationsincludemarkinghazardsandaisles, color-code piping, fine line paint masking, decorative trim, high visibility splicing, and more.

•“Colorthroughout”constructionresists scrapes, wear, weathering, and chemicals

•Widevarietyofcolorsplustransparent

•Flexiblebackingwithaggressiveadhesive bonds, conforms, and seals even with irregular surfaces

•Removescleanlywithoutleavingadhesive behind to clean up

•Stretchestomoldtocontours



ProductColor

471/Various

471+/Indigo

4712/Various

472/Black

5700/Black and White Stripes

5702/Black andYellow Stripes

766/Black and Yellow Stripes

767/Red and White Stripes

470/Tan

484/Tan

764/Various

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

Vinyl/Rubber

4.1 (0.10)

4.1 (0.10)

4.1 (0.10)

9.0 (0.23)

4.2 (0.11)

4.2 (0.11)

4.0 (0.10)

4.0 (0.10)

6.3 (0.16)

5.7 (0.14)

4.1 (0.10)

5.2 (0.13)

5.3 (0.13)

5.3 (0.13)

10.4 (0.26)

5.5 (0.14)

5.4 (0.14)

5.0 (0.125)

5.0 (0.125)

7.1 (0.18)

7.2 (0.18)

5.0 (0.125)

23 (25)

35 (38)

34 (37)

23 (25)

19 (21)

19 (21)

18 (21)

18 (21)

26 (28)

20 (22)

18 (21)

16 (280)

14 (243)

16 (280)

32 (560)

15 (260)

15 (260)

13 (228)

13 (228)

20 (350)

20 (350)

13 (228)

130

191

190

270

170

170

180

180

180

220

180

40 to 170°F (4 to 77°C)

Up to 250°F (121°C)

40 to 170°F (4 to 77°C)

Up to 225°F (107°C)

40 to 170°F (4 to 77°C)

40 to 170°F (4 to 77°C)

60 to 85°F (15 to 27°C)

60 to 85°F (15 to 27°C)

Up to 170°F (77°C)

Up to 170°F (77°C)

60 to 85°F (15 to 27°C)







Premium Performance Vinyl Tapes

Hazard Identification Tapes — Premium Performance Permanent

Hazard Identification Tapes — General Performance Temporary

Electroplating and Anodizing

General Purpose Vinyl Tapes


Conformable and clean removal.Black, Blue, Brown, Green, Orange, Purple, Red, Transparent, White, Yellow.

Superior conformability, sharp paint line, clean removal.

Linered version of 471.42# premium paper liner.

Abrasion resistant.High temperature resistant.

Adhesive side printing.Critical applications.

Adhesive side printing.Critical applications.

Non-critical applications.

Non-critical applications.

Chemical resistance.1

Lower adhesion than 470 Tape.

Non-critical applications.Black, Blue, Brown, Gray, Green, Orange, Purple, Red, Transparent, White, Yellow.

For fine line paint masking, 3M™ Vinyl Tape 471 provides sharp paint lines and the clean removal of a firm rubber adhesive.

For color-coding pipes with 3M™ Vinyl Tapes, select from either nine vivid colors or transparent to let underlying color show through. Backing is colored throughout to help maintain ready visibility.

3M™VinylTapesclearlymarklanes,corridorsandhazardousor no-go areas in factories, warehouses, and hospitals. Durable vinyl backing resists abrasion, scuffing, moisture, weathering, acids, and alkaline chemicals for long service life.

To highlight low hanging objects, protruding equipment, or steps, 3M™ Vinyl Tape 5702 combines yellow and black for a striped combination that calls for attention.

1HH-T-0025, Amend 2 2 MIL-T-22085 Amend 3, Type IVNote: This technical information and data should be considered representative or typical only and should not be used for specification purposes.


51

1Viscoelastic polymer 2 Optimum damping temperature 3 The specimen passed the requirements of FAR 25.853 (a)(1)(ii) per AMDT.25-83 tested in composite on aluminum backer.Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.

1HH-T-0025, Amend 2 2 MIL-T-22085 Amend 3, Type IVNote: This technical information and data should be considered representative or typical only and should not be used for specification purposes.

3M™ Sound Damping Foils

3M™ Damping Foil 435 between the ribs and stringers of an aircraft fuselage helps reduce vibrational fatigue and noise inside the passenger cabin.

Reduce noise and vibration in many applications

With pressure sensitive viscoelastic acrylic polymer on dead soft aluminum foil, 3M™ Sound Damping Foils quiet noise and reduce vibration in many areas for Aerospace, Automotive, Appliances, Construction, and MRO (Maintenance and Repair).

•Reducestructure-bornenoiseinmetaland composite panels and support structures

•Optimizedacrylicconvertsvibrationalenergy to negligible heat that readily dissipates

•Reducevibrationalfatiguetodecreasewear and tear on parts and lower the risk of part loosening and displacement

•Effectivedampingwithaslittleas10% surface coverage

•Pressuresensitiveforeasyself-fixturing application

•Longagingperformance

•Goodperformanceoverawide temperature range

•Lineredconstructionprovidesabilityto die-cut product

Applied with a 3M™ PA-1 Wiper to the inside of a car door, 3M™ Damping Foil 2552 effectively damps noise and vibration with aslittleas10%surfacecoverage.Optimizedacryliconadeadsoftaluminumconstraininglayerconvertsvibrationalenergytonegligible heat that readily dissipates.

3M™ Damping Foil 2552 on the inside of a washing machine reduces structure-borne noise and reduces vibrational fatigue to decrease the risk of part loosening and displacement.





ProductColor

ProductColor

2552/Silver

480/Transparent

481/Black

4811/White

483/Various

Aluminum/VEP1

Polyethylene/ AcrylicPolyethylene/ RubberPolyethylene/ RubberPolyethylene/ Rubber

10.0 (0.25)

3.8 (0.10)

7.7 (0.20)

7.5 (0.18)

3.9 (0.10)

15 (0.38)

5.1 (0.13)

9.8 (0.25)

9.5 (0.24)

5.3 (0.13)

65 (72)

22 (24)

32 (35)

30 (36)

12 (13)

80 (1400)

10 (180)

15 (260)

15 (260)

11 (190)

15

277

510

490

240

-25 to 175°F (-32 to 80°C)2

20 to 170°F (-7 to 77°C)

20 to 170°F (-7 to 77°C)

Up to 170°F (77°C)

Up to 170°F (77°C)





Comments

Comments









Damping Foils

ASTM Test Method:

ASTM Test Method:

D-3652

D-3652

D-3652 D-3330

D-3330

D-3759

D-3759

D-3759

D-3759

General purpose vibration damping3

Acrylic adhesive.

Preservation sealing tape.2

Preservation sealing tape.

Black, Blue, Green, Red, Transparent, White, Yellow


Polyethylene Tapes

D-3652

52

3.83.13.83.13.13.12.84.12.8

3M™ Performance Label MaterialsTechnology and capability foridentifying, informing, tracking,warning, protecting, and securing.

With 3M adhesives, topcoats, facestocks and liners, you can mix and match to achieve about 150,000 combinations. That means technology and solutions for most labeling requirements for notebook and desktop computers, printers, peripherals, mobile phones, and more. 3M also helps you put that technology to work just about anywhere in the world with global service, expertise, and a customer-focused attitude.

ComprehensivelistingofULrecognizedand RoHS compliants labels.

3M™ Performance Label Materials with Structured Adhesive – With unique microchannelsthroughoutthestructuredadhesive,airflowsfreelyfrombetweenthe label adhesive and substrate. Hand-applied large labels go on smoothly and stay that way permanently without unsightly wrinkles and bubbles.

Application

Certification, Instruction, or Warning Label

Identification andInformation Label

Thermal transfer printable, with adhesion to difficult surfaces for life of the product.

Cost effective thermal transfer printable, with adhesion to many surfaces for life of the product.

Thermal Transfer Polyester with High Holding Adhesive 350

Thermal Transfer Polyester with High Structured Adhesive 350 for bubble-free lamination

Thermal Transfer Polyester with High Precision Adhesive 310

787178687872

7220SA7214SA

7815781678187875

Unique Application Needs ColorProduct Family/Description Product Thickness (Face/Adhesive only)

mils

Identifying/Informing/Warning

Gloss whiteGloss whiteMatte platinumGloss whiteBrushed SilverMatte whiteGloss whiteMatte silverPlatinum

4.04.03.03.2

3.63.6

3.03.02.9

2.92.92.8

3.0

2.0

2.8

2.8

1.8

2.1

1.0

Ultra clear

Gloss clear

Clear

Gloss clear

Matte clear

Gloss clear

PCB TrackingLabel

Laser MarkableLabel Material

Tamper indicatingLabel

Masking

Overlaminate

Barcode printable with high temperature resistance. Survives solder processing.

High temperature resistance. Thermal transfer printable.

Laser etchable film, durable label construction May be suitable for DoD UID - A “unique identifier” containing data elements used to track Department of Defense parts through their life cycles.

Tamper indicating stocks designed to provide a “void” message in the facestock when removal is attempted.

Tamper indicating material designed to provide triangle pattern when removal is attempted.Tamper evident material destructs if attempts are made to remove from substrate. Thermal transfer printable.Tamper evident material destructs if attempts are made to remove from substrate. Dot matrix printable.

Ultra clear, printable label material for lens protection applications. Low tack adhesive with clean removability.

High tack adhesive with ultra clean removal.

Protects surface of label from abrasion, sunlight, chemicals, or moisture. Film liner offers excellent graphic appearance.

High Temperature Polyimide (Kapton™) with High Temp Adhesive 100

High Temperature Acrylate with High Temp Adhesive 150

Laser Etch Acrylate with High Holding Adhesive 350

VOID Tamper Indicating Polyester with High Holding Adhesive 350

VOID Tamper Indicating Polyester with Tackified Adhesive P1410

Triangle Tamper Indicating Polyester with Tackified Adhesive P1410Destructible Vinyl with High Holding Adhesive 350Destructible Vinyl with High Holding Adhesive 200

Highly Transparent Polyester with Removable Adhesive

Thermal Transfer Polyester with Ultra Removable Adhesive R3500Press Printable Polypropylene with Ultra Removable Adhesive R3500

Non-topcoated Polyester with High Performance Adhesive P1400Thermal Transfer Polyester withHigh Tack Adhesive 400Non-topcoated Polyester withHigh Tack Adhesive 400

7381/78667380

FMV02

FMV01202FMV01402

7613T

7885

76991

FM1542

FP0862

OFM010N

7744FL

7730FL

Matte whiteMatte whiteMatte whiteMatte white

Matte black on whiteMatte silver on black

Gloss whiteMatte whiteBright silver

Bright silverGloss whiteMatte white

Matte white

Tracking

Securing

Protecting

7811-DMI 7812-TTL80013921

78477848

Other Technologies


53


Product Number

TemperaturePerformance2

Wt. in gramsTemp: °F (C°)

Product Type

Adhesive Type

CommentsEngagedThickness1

Inches (mm)

Material ClosureLife

Flam

e-re

sist

ant

Acry

lic

PSA

Plai

nbac

kSy

nthe

tic

Rubb

er

Adhe

sive

Plai

nbac

k (N

o ad

hesi

ve)

Acry

lic A

dhes

ive SJ3572

SJ3571

SJ3576SJ3577

SJ3518FRSJ3519FR

SJ3586FRSJ3587FR

SJ3526NSJ3527N

SJ3401SJ3402

SJ3418FRSJ3419FR

SJ3506SJ3507

SJ3000

HookLoop

HookLoop

HookLoop

HookLoop

HookLoop

HookLoop

HookLoop

HookLoop

Back to Back

Hook andLoop

Nylon

Polyester

Flame resistant nylon

Flame resistant Polyester

Nylon

Nylon

Flame resistant nylon

Polypropylene Polyester

Polypropylene Polyester

5,000+

1,000+

5,000+

1,000+

5,000+

5,000+

5,000+

<25

<25

High temperature

High temperature

Syntheticrubber

Syntheticrubber

Syntheticrubber

None

None

Acrylic

None

0.15 (3.8)

0.15 (3.8)

0.15 (3.8)

0.17 (4.3)

0.15 (3.8)

0.13 (3.3)

0.13 (3.3)

0.04 (1.0)

0.06 (1.5)

1,000g200°F (93°C)

1,000g200°F (93°C)

500g100°F (38°C)

500g100°F (38°C)

500g100°F (38°C)

1,000g220°F (104°C)

1,000g220°F (104°C)

500g120°F (49°C)

500g120°F (49°C)

Certified to GM3618M and GM2743M Type II. Loop available with strong splice providing continuous product and liner when removed from roll. Order special splice as SJ3571FS or SJ3571FSR for splice marked with blue tape. Paper liner product ordered as SJ3571P or SJ3572P.

Excellent for outdoor or humid conditions. Certified to GM 3618M.

Flame resistant (meets FAR 25.853). Meets Boeing BMS 8-285G, Type III, Class 1.

Good for outdoor or high humidity conditions. Flame resistant (meets FAR 25.853). Meets Boeing BMS 8-285G, Type IV, Class 1.

One roll (1” x 4.9 yd.) each of SJ3526N and SJ3527N, order MP3526N/27N. Paper liner product ordered as SJ3526NP or SJ3527NP.

Certified to GM2743M Type II. One roll (1” x 4.9 yd.) each of SJ3401 and SJ3402. Order MP3401/02. Sew-on.

Flame resistant (meets FAR 25.853). Certified to Boeing BMS 8-285G, Type II, Class 2, Sew-on.

Available in white. Thin profile with high shear strength.

Available in red and black. Good for bundling and cable ties.

3M™ Scotchmate™ Thin Reclosable Fasteners

Standardcolors:Nylon-black,whiteandbeige;Polyester-blackandolive.Maximumwidthsare4”,exceptfor3M™Scotchmate™ReclosableFastenersSJ3506andSJ3507whichareavailablein 6” widths. All products come in 50 yard rolls.

Footnotes: 1) Engaged thickness is for hook and loop with the same backcoating engaged to each other. Any of these 3M™ Scotchmate™ Reclosable Fasteners also be engaged with 3M™ Dual Lock™ Reclosable Fasteners providing a quick grab closure with high strength and limited cycle life. 2) Able to support indicated weight in a one square inch system static overlap shear to aluminum for 10,000 minutes (approximately 1 week), at indicated temperature.

Suitable for indoor and outdoor use

•Attachmentofpanelsordisplays,adhesive bonds to a wide variety of surfaces•Enablethousandsofeasyopeningsand closings with your attachment•Easyinstallationinjust3steps...clean,Peel and stick

Ideal for display and signage, transportation and automotive.

Solution for temporary and permanent attachment

Light to medium weight

Medium to heavy weight

3M™ Scotchmate™ and Dual-Lock™ Reclosable Fasteners

Other Technologies

54

Product Number

TemperaturePerformance4

Wt. in gramsTemp: °F (C°)

Product Type

Engaged Thickness3

Inches (mm)

CommentsColor Backcoating2

Adhesive

Lead

Acr

ylic

PSA

No a

dhes

ive

coat

ing

3M™

Acr

ylic

PSA

3M™

Acr

ylic

Pre

ssur

e Se

nsiti

ve A

dhes

ive

(PSA

)Le

adSy

nthe

tic R

ubbe

r PSA

SJ3552

SJ3550

SJ3551

SJ3562

SJ3560SJ3561

SJ3752

SJ3781

SJ3751

SJ3542

SJ3540

SJ3541

SJ3462

SJ3460

SJ3461

SJ4570

SJ4575

SJ4580

170

250

400

170

250400

170

250

400

170

250

400

170

250

400

705

705

705

Black

Clear

Black

Black

Clear

Clear

Black

Clear

White Acrylic

Clear Acrylic

White Acrylic

Synthetic Rubber

None

Clear Acrylic

Clear Acrylic

Clear Acrylic

0.23 (5.7)

0.23 (5.7)

0.23 (5.7)

0.23 (5.7)

0.15 (3.9)

0.10 (2.5)

0.10 (2.5)

0.12 (3.0)

1,000g200°F (93°C)

1,000g200°F (93°C)

1,000g200°F (93°C)

500g120°F (49°C)

1,000g200°F (93°C)

500g158°F (70°C)

500g158°F (70°C)

1,000g200°F (93°C)

Conformable, tacky adhesive adheres better to slightly textured or irregular surfaces. SJ3552V is packaged for clean room use.One roll (1” x 4.9 yd.) each of SJ3551 and SJ3552 can be ordered as MP3551/3552.

Product with high strength Scotchmate splice is SJ3550SM.SJ3550V is packaged for clean room use.

One roll (1” x 4.9 yd.) each of SJ3551 and SJ3552 can be orderedas MP3551/3552.

Translucent fastener with aggressive, tacky adhesive for general bonding to most medium and high energy surfaces.

Two rolls (1” x 4.9 yd.) of SJ3560 can be ordered as MP3560.Product with continuous liner and product splice is SJ3560FS.

Conformable, tacky adhesive for general bonding. Adheres better to slightly textured or irregular surfaces. Certified to GM3618M, Daimler Chrysler PF-8858, Ford WSB M15P35 Type III.

Certified to GM3618M, Daimler Chrysler PF-8543, PF-8858, Ford WSB M15P35 Type III.

Product with continuous liner and product splice is SJ3781FS. Certified to GM3618M, Daimler Chrysler PF-8543, PF-8858, Ford WSB M15P35 Type III.

For indoor use or attachment to low surface energy substrates. One roll (1” x 4.9 yd.) each of SJ3541 and SJ3542 can be ordered as MP3541/3542. SJ3542V is packaged for clean room use. SJ3540V is packaged for clean room use.One roll (1” x 4.9 yd.) each of SJ3541 and SJ3542 can be ordered as MP3541/3542. SJ3541V is packaged for clean room use.

For attachment to fabrics via sewing, or to wood and similar substrates using staples. Excellent UV resistance in a translucent product, allowing substrate color to be easily seen through the fastener.

Thin adhesive bonds well to low surface energy substrates.One roll (5/8” x 10’) of SJ4570 can be ordered as MP4570.

Black, bonds well to LSE substrates.

Aggressive, tacky adhesive for general bonding to most medium and high energy surfaces. Excellent for outdoor and high humidity conditions. Certified to Ford WSB M15P35 Type III.

3M™ Dual Lock™ Low Profile Reclosable Fasteners


Footnotes:1) Type 400 is not recommended to be engaged to other type 400 fasteners. As well, type 170 should not be engaged with type 170.2) Acrylic PSAs are best suited for outdoor or high humidity applications for medium to high energy surfaces.3) Engaged thickness is for products with the same backcoating. You can mix products with different backcoatings to obtain an even greater variety of engaged thicknesses. Any of these 3M™ Dual Lock™ Reclosable Fasteners can be engaged with 3M™ Scotchmate™ Reclosable Fasteners providing a quick grab closure with high strength and limited cycle life.4) Able to support indicated weight in a one square inch system static overlap shear for 10,000 minutes, at indicated temperature.

Notes:Suggest 4 square inches of fastener per pound of load as a starting point for evaluation of long term performance. Suggest type 250 engaged to type 250 as a starting point for evaluations. Tensile strength increases in the following order: 170/250 < 250/250 < 170/400 < 250/400. Maximum widths are 6”. All products available on 50 yard rolls except 3M™ Dual Lock™ Reclosable Fasteners SJ3756, SJ3789 and SJ3757 which are 45 yards and SJ3481 which comes in four foot strips.

This information should be considered representative only, for help in narrowing the list of possible fasteners for further and more detailed evaluation, and should not be used for specification purposes. User is responsible for determining whether the 3M product is fit for the desired end use. Refer to specific product technical data sheets for more detailed product performance information.

Other Technologies

55

3M™ Flexographic Mounting Systems

E-Series Tapes with Easy Mount Adhesive

EH-Series Adhesive to hold the edge on small diameter cylinders

Forhalftoneworkwheredotgainisaconcern,asoftertapeoptimizesreproduction. When solids and dots share the plate, a combination tape can properly balance the result. When your customer wants solid ink and crisp lines, you’ll want firm, high density mounting tape.

From the wide 3M selection, you can find the adhesives, foams, and thicknesses for the print quality that customers demand and expect. You’ll also find choices to meet your handling requirements for:

•Mountingeaseandpositioningaccuracy•Easy,cleanremovalfromplateandcylinder

On easy with reduced air entrapmentUnlikeflatorpebbledliners,E-Serieslinersarecrosshatchedonbothsideswithuniquemicrochannelsthatallowairtoflowthroughouttheadhesive.Improvedairflowvirtuallyeliminatesairbubbleproblemsforeasier

3M EH-Series Tapes combine the air-release of 3M E-Series Tapes with higher plate side adhesion to resist edge lifting on cylinder diameters as small as 2”.

application. Air releases from between the tape and plate, and between the tape and cylinder or sleeve for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity.

Microscopic view of adhesive surface measured with interferometer

Easy Mount Adhesive Pebbled Liner Flat Liner

Stays on with reduced edge-liftingExclusive 3M plate-side adhesive maintains tight contact between tape and plate to dramatically reduce edge lifting. Saves the prep time, downtime, and labor of sealing plate edges.

Peels off easily to reduce plate damageE-series tapes grip tightly but peel off so easily you can virtually eliminate plate back treatment. You’re less likely to damage plates, so you can save time, labor, and money

Bubble-free print quality•Preventblemishesinscreenandprocess printing•Helpassureproperregistration

Other Technologies

56

13 Series 3M™ Cushion-Mount™ Plus Medium Soft Combination Printing Tapes

19 Series 3M™ Cushion-Mount™ Plus Soft Combination Printing Tapes

12 Series 3M™ Cushion-Mount™ Plus Light Combination Printing Tapes

11 Series 3M™ Cushion-Mount™ Plus Process Printing Tapes

17 Series 3M™ Cushion-Mount™ Plus Medium Firm Combination Printing Tapes

15 Series 3M™ Cushion-Mount™ Plus Medium Firm Combination Printing Tapes

10 Series 3M™ Cushion-Mount™ Plus Standard Combination Printing Tapes

ProductNumber

Description Plates Cylinders FeaturesColorApplicationThicknessInches mm

Manufactured TargetThicknessInches mm

3M™ Flexomount™ Solid Printing Tapes

18 Series 3M™ Cushion-Mount™ Plus Firm Combination Printing Tapes

3M™

Sol

id P

rintin

g Ta

pes

411DL412DL447DL

413DL414DL

E1815H, E1815,1815ME1820H, E1820,1820M

E1715H, E1715E1720H, E1720,1720M

E1515H, E1515E1520H, E1520

E1315H, E1315E1320H, E1320

E1215H, E1215E1220H, E1220

E1915H, E1915,E1915HS, 1915ME1915S

E1920H, E1920,1920M

E1920S, 1920SE1920HS

E1115H, E1115,1115

E1115-15H, E1115-15, 1115-15

E1120H, E1120, 1120

E1120-20, 1120-20

1120K

E1015H, E1015, 1015, 1015M

E1015-15H, E1015-15,1015-15

E1020H, E1020,1020, 1020M, 1020R

E1020-20H, E1020-20,1020-20

E1040, 1040, E1040H

E1060, 1060, E1060H

0.015 0.380.020 0.510.010 0.25

0.015 0.380.020 0.51

0.015 0.380.020 0.51

0.015 0.380.020 0.51

0.015 0.380.020 0.51

0.015 0.380.020 0.51

0.015 0.380.020 0.51

0.015 0.38

0.020 0.51

0.020 0.51

0.015 0.38

0.015 0.38

0.020 0.51

0.020 0.51

0.020 0.51

0.015 0.38

0.015 0.38

0.020 0.51

0.020 0.51

0.040 1.02

0.060 1.52

0.015 0.380.020 0.510.010 0.25

0.015 0.380.020 0.51

0.017 0.430.022 0.56

0.017 0.430.022 0.56

0.017 0.430.022 0.56

0.017 0.430.020 0.51

0.017 0.430.022 0.56

0.017 0.43

0.022 0.56

0.022 0.56

0.017 0.43

0.015 0.38

0.022 0.56

0.020 0.51

0.017 0.43

0.015 0.38

0.022 0.56

0.020 0.51

0.042 1.07

0.062 1.57

Gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier. Available in single and double liner.

Black double coated tapewith a firm rubber adhesiveon each side of a vinyl carrier.Available only in double liner.

Differential acrylate adhesivesystem on each side of afoam carrier, protected by a release liner on one side.

Differential acrylate adhesivesystem on each side of a foam carrier, protected by a release liner on one side.


Differential acrylate adhesivesystem.

Differential acrylate adhesivesystem on each side of afoam carrier, protected by arelease liner on one side.

Differential acrylate adhesivesystem on each side of a foamcarrier, protected by a releaseliner on one side.

Differential acrylate adhesivesystem on each side of a foamcarrier, protected by a releaseliner on one side.

Soft support improves tonereduction when process andhalftone images predominate.

Better tone reproduction than the standard combination printing tapes.

Clean removal from plate and print cylinder.


P/RP/RP/R

P/RP/R

PP

P

PP

PP

PP

P

P

P

P

P

P

P

P

P

P

P

P/R

PP

SS/S/K

SS/S/K

SS/S/K

SS/S/K

SS/S/K

SS/S/K

SS/S/KSS/S/KSS/S/K

SS/S/KSS/S/K

SS/S/KSS/S/K

SS/S/K

SS/S/KSS/S/K

SS/S/KSS/S/K

SS/S/KSS/S/K

SS/S/K

SS/S/K

SS/S/K

SS/S/K

SS/S/K

SS/S/K

SS/S/K

SS/S/K

GrayGrayGray

BlackBlack

BlueBlue

Teal

PurplePurple

YellowYellow

OrangeOrange

Pink

Pink

Pink

Tan

Tan

Tan

Tan

Tan

White

White

White

White

White

White

Gray vinyl tapes with high adhesion.

Helps reduce edge lifting.

Helpsminimizepinholingonsolidwork.

Black vinyl - lower adhesion.

Higher temperature and solvent resistance.

Helpsminimizepinholingonsolids.

Better solid ink density than the standard combination printing tapes.Clean removal from plate and print cylinder.

Qualityresultswhenplatecontainsslightly more solids in a combination of solid and halftone images.

High quality, medium combination print.

High quality, medium-softcombination print.

Most versatile 3M™ Cushion-Mount™ Plus Tapes.

Effectively prints most types of flexographicprinting.

3M™

Com

bina

tion

Prin

ting

Tape

s3M

™ P

roce

ss P

rintin

g

E - Air Release Liner M - Modified Plate Side Adhesion DL - Double Liner S - Urethane Sleeve K - High sleeve side adhesion for composite sleeves.SS - Stainless Steel Cylinder R - Rubber Plates P - Photopolymeric Plates EH - High Plate Side Adhesion

NOTE: This technical information and data should be considered representative or typical only and should not be used for specification purposes.


Other Technologies

57

Numerical Product Index

2E93EZ 43

4F79 43

4F94 43

5-Way 16

25A10 43

30NF/30H 13

31U26C/UV 43

44S56W 43

49 13

72 15

74 15

75 15

76 15

77 15

78 15

80 15

90 15

94 15

94CA 13

100 13

120af 38

200 32

200a 38

232 32

302 34

305 34

311 34

313 34

353 34

355 34

361 45

361 46

369 34

371 34

372 34

373 34

375 34

396 48

398FR 46

398FRP 46

401M 25

401M 25

411DL 56

412DL 56

413DL 56

414DL 56

415 25

420 47

421 47

425 45

425 47

427 47

433 47

444 24

447DL 56

450EK 29

450XL 29

463 28

465 28

465XL 29

466XL 29

467MP 28

468MP 28

470 50

471 45

471 50

476XL 29

480 51

481 51

483 51

484 50

525 14

535 14

540 14

550 14

551 14

560 14

590 14

665 26

666 26

700a 38

700aks 38

740 14

760 14

764 50

766 50

767 50

800a 38

800ab 38

800af 38

800asb 38

850 45

850 48

850 48

853 48

860 36

862 36

880/880NR 36

890NR 36

893 36

897 36

898/898NR 36

920XL 29

924 31

926 31

928 31

969 31

970XL 31

976 31

987 31

1015-15 56

1015M 56

1020, 1020M, 1020R 56

1020-20 56

1115 56

1120K 56

1357 13

1357L 13

1720M 56

1815M 56

1820M 56

1910C 33

1920M 56

2000NF 13

2104 43

2126 43

2141 32

2214 32

2308 32

2404 43

2552 45

2552 51

2693 32

3112 43

3125 43

3311 47

3900 33

3903 33

3921 52

3939 33

3989 11

4000UV 14

4004 23

4008 23

4016 23

4026 23

4032 23

4052 23

4056 23

4085 23

4167 43

4224NF 13

4377-50 25

4377-85 25

4408 23

4416 23

4432 23

4451 26

4462 23

4466 23

4492 23

4496 23

4611 21

4646 21

4655 21

4658F 23

4658F 26

4712 50

4811 51

4905 21

4910 21

4914 21

4919F 21

4920 21

4926 21

4929 21

4930 21

4932 21

4936 21

4936F 21

4941 21

4941F 21

4943F 21

4945 21

4946 21

4947F 21

4949 21

4950 21

4951 21

4952 21

4955 21

4956 21

4956F 21

4957F 21

4959 21

4979F 21

4991 21

5010 14

5112 43

5151 49

5153 49

5180 49

5181 49

5200 14

5401 46

5421 49

5423 49

5425 49

5430 49

5451 49

5453 49

5480 49

5481 49

5490 45

5490 49

5491 49

5498 49

5700 50

5702 50

5915 21

5925 21

5930 21

5952 21

5958FR* 21

5962 21

7214SA 52

7220SA 52

7380 52

7381/7866 52

7613T 52

76991 52

7730FL 52

7744FL 52

7811-DMI 52

7812-TT 52

7815 52

7816 52

7818 52

7847 52

7848 52

7868 52

7871 52

7872 52

7875 52

7885 52

7945MP 30

7951 30

7952MP 30

7953HL 30

7953MP 30

7955MP 30

7956MP 30

7956MWS 30

7956WDL 30

7957MP 30

7959MP 30

7961MP 30

7962MP 30

7965MP 30

7966MWS 30

7966WDL 30

7991MPW 30

7992MP 30

7992MPW 30

7993MP 30

7995MP 30

7997MP 30

8132LE 28

8153LE 28

8325 40

8326 40

8327 40

58

Numerical Product Index

8328 40

8401 48

8402 48

8403 48

8651 36

8896 35

8898 35

8898 36

8901 48

8902 48

8905 48

8911 48

8915 35

8916 35

8916V 35

8919 35

8919 36

8932 36

8934 36

8951 48

8952 48

8979 33

8979N 33

8992 48

9009 24

9019 24

9045MP 30

9056MP 30

9057MP 30

9059MP 30

9061MP 30

9077 24

9079 28

9080HL 25

9082 28

9085 28

9086 24

9087 24

9088 24

9088FL 24

9183 24

9324 49

9325 49

9372DKW 28

9372W 28

9375W 28

9377 25

9415PC 26

9416 26

9420 25

9425 26

9425HT 26

9442 28

9443NP 25

9445 28

9448HK 25

9449S 26

9457 28

9458 28

9459W 28

9471 28

9471LE 28

9472 28

9472LE 28

9482PC 28

9485PC 28

9490LE 24

9492MP 24

9495LE 24

9495MP 24

9500PC 24

9576 25

9599 25

9690 24

9690B 24

9731 25

9795 25

9795B 25

9816H 25

9816L 25

9816M 25

9817H 25

9817L 25

9817M 25

9824 24

9828 24

9888T 25

9925XL 29

9926XL 29

9934XL 29

9941 25

AC113 9

AC12 9

AC452 9

AC471 11

AC649 11

AC68 9

AC77 9

AC78 9

AC79 9

Adhesive Remover 16

AP 111 20

AP 115 20

C-22 37

C-23 37

C-25 37

Citrus Base Cleaner 16

CT-6348 25

DP100 7

DP100 Plus 7

DP100FR 7

DP100NS 7

DP105 7

DP110 7

DP110 7

DP125 7

DP125 7

DP190 7

DP190 7

DP270 7

DP420 7

DP420 7

DP420NS 7

DP460 7

DP460NS 7

DP8005 7

DP8010 7

DP8010NS 7

DP805 7

DP807 7

DP810 7

DP810NS 7

DP812 7

DP820* 7

DP825 7

E1015-15H, E1015-15 56

E1015H, E1015, 1015 56

E1020-20H, E1020-20 56

E1020H, E1020 56

E1040, 1040, E1040H 56

E1060, 1060, E1060H 56

E1115-15, 1115-15 56

E1115-15H 56

E1115H, E1115 56

E1120-20, 1120-20 56

E1120H, E1120, 1120 56

E1215H, E1215 56

E1220H, E1220 56

E1315H, E1315 56

E1320H, E1320 56

E1515H, E1515 56

E1520H, E1520 56

E1715H, E1715 56

E1720H, E1720 56

E1815H, E1815 56

E1820H, E1820 56

E1915H, E1915 56

E1915HS, 1915M 56

E1915S 56

E1920H, E1920 56

E1920HS 56

E1920S, 1920S 56

EC100 9

EC2216 7

F9460PC 28

F9469PC 28

F9473PC 28

FM1542 52

FMV01202 52

FMV01402 52

FMV02 52

GM15 11

H-10 37

H-12 37

H-120 37

H-122 37

H-123 37

H-128 37

H-128 37

H-129 37

H-130 37

H-131 37

H-171 37

H-1755 37

H-180 37

H-183 37

H-190 37

H-192 37

H-320 37

H-38 H-133 37

HT700 9

L8001 52

LO100 9

M-707 37

M-727 37

M-920 37

M-96 37

Multi-Surface Wipes 16

OFM010N 52

P400 37

PP0862 52

PR10 9

PR54 9

PR851 9

Primer 94 20

PS65 11

PS67 11

S-63 37

S-634 37

SB95 9

SF100 9

SI1500 9

Silicone Lubricant 16

SJ3000 53

SJ3401 53

SJ3402 53

SJ3418FR 53

SJ3419FR 53

SJ3460 54

SJ3461 54

SJ3462 54

SJ3506 53

SJ3507 53

SJ3518FR 53

SJ3519FR 53

SJ3526N 53

SJ3527N 53

SJ3540 54

SJ3541 54

SJ3542 54

SJ3550 54

SJ3551 54

SJ3552 54

SJ3560 54

SJ3561 54

SJ3562 54

SJ3571 53

SJ3572 53

SJ3576 53

SJ3577 53

SJ3586FR 53

SJ3587FR 53

SJ3751 54

SJ3752 54

SJ3781 54

SJ4570 54

SJ4575 54

SJ4580 54

SJ5003 41

SJ5007 41

SJ5008 41

SJ5009 41

SJ5012 41

SJ5017 41

SJ5018 41

SJ5023 41

SJ5027 41

SJ5076 41

SJ5306 41

SJ5312 41

SJ5514 41

SJ5532 41

SJ5816 41

SJ5832 41

SJ6208 41

SJ6216 41

SJ6232 41

Sticker and Marker Remover 16

TL22 11

TL42 11

TL43 11

TL62 11

TL71 11

TL72 11

TL77 11

TL90 11

Industrial Adhesives and Tapes Division3M Technologies (S) Pte Ltd

Product Use:Many factors beyond 3M’s control and uniquely within user’s knowledge and control can a�ect the use and performance of a 3M product in a particular application. Given the variety of factors that can a�ect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

Documents

3M Adhesivos y Cinta