3905 4101 Recognitions List v2 (1)

RECOGNITION LISTMOTOR VEHICLE ENGINEERING

VEHICLE MAINTENANCE AND REPAIR

RECOGNITIONLIST

City & Guilds is one of the world’s leadingvocational education businesses, withover 130 years of experience in designingqualifications and skills developmentsolutions for governments and industries.

Since 1878, millions of learners have usedour qualifications to enhance their skillsand today millions more are studying toachieve a City & Guilds certificate torealise their potential.

We operate in over 80 countries and havedeveloped a dedicated internationalportfolio which covers a wide range ofsubject areas, including motor vehicleengineering and vehicle maintenance andrepair.

Our qualifications offer great progressionopportunities and are widely accepted byemployers around the world as thebenchmark for workplace excellence.

GOVERNMENT p3

HIGHEREDUCATION p9

INDUSTRY p13

EUROPASS p15

MOTOR VEHICLE ENGINEERING

VEHICLE MAINTENANCE AND REPAIR

Organisations featured in this document onlyare some of the many prestigious institutionsand employers that recognise the followingInternational Vocational Qualifications (IVQs),as shown in their individual statement:

Motor Vehicle Engineering (3905)

• Level 1 IVQ Certificate in Motor Vehicle Systems

• Level 2 IVQ Diploma in Motor Vehicle Systems

• Level 3 IVQ Advanced Diploma in Diagnostic Techniques

• Level 2 IVQ Technician Certificate in Motor Vehicle Systems

• Level 3 IVQ Technician Diploma in Motor Vehicle Systems

• Level 3 IVQ Advanced Technician Diploma in Diagnostic Techniques

• Level 5 IVQ Advanced Technician Diploma in Motor Vehicle Engineering

• Level 5 IVQ Advanced Technician Diploma in Motor Vehicle Management

Vehicle Maintenance and Repair (4101)

• Level 1 IVQ (Specialist) Certificate in Vehicle Maintenance and Repair

• Level 1 IVQ (Specialist) Certificate in Vehicle Maintenance and Repair (Vehicle Valeting)

• Level 2 IVQ (Specialist) Diploma in Vehicle Maintenance and Repair

• Level 3 IVQ (Specialist) Advanced Diploma in Vehicle Maintenance and Repair

Illustrations used throughout this publication are representative of the people and industries City & Guilds help andsupport. Persons shown may be unrelated to the statements or endorsments on the same or adjoining pages.

Key

Recognised levels (if applicable)

How employers view City & Guildsinternational qualifications

Having a City & Guilds qualification enhances one’s career prospects

City & Guilds qualifications are an excellentrecruitment benchmark for the industry

City & Guilds qualifications are an excellenttraining solution for employers

Outstanding learners for a relevant City & Guildsqualification will be considered for a placement

Applications are welcome from City & Guildsgraduates seeking work within the sector

Priority will be given to applicants with a City & Guilds qualification when recruitingMotor Vehicle Engineering

Vehicle Maintenance and Repair

2.version002.Nov12

IVQ (Specialist) Certificate (4101)

IVQ (Specialist) Diploma (4101)

IVQ (Specialist) Advanced Diploma (4101)

IVQ Certificate (3905)

IVQ Technician Certificate/IVQ Diploma (3905)

IVQ Technician Diploma/IVQ Advanced Diploma (3905)

IVQ Advanced TechnicianDiploma (3905)

Recognitions featured in this sectionare examples of how City & GuildsIVQs in Motor Vehicle Engineeringand Vehicle Maintenance and Repairare recognised within nationalqualifications frameworks oraccepted by government agenciesand other regulatory authorities.

GOVERNMENTRECOGNITIONS

Motor Vehicle EngineeringVehicle Maintenance

and Repair

3.government.01

GOVERNMENT RECOGNITIONS

Key

Recognised levels(if applicable)

Motor Vehicle EngineeringVehicle Maintenance and Repair

4.government.02

IVQ (Specialist) Certificate

IVQ (Specialist) Diploma

IVQ (Specialist) Advanced Diploma

IVQ Certificate

IVQ Technician Certificate/IVQ Diploma

IVQ Technician Diploma/IVQ Advanced Diploma

IVQ Advanced TechnicianDiploma

Office of the Qualifications andExaminations Regulator (Ofqual)www.accreditedqualifications.org.uk

The IVQs in Motor Vehicle Engineering and theIVQs in Vehicle Maintenance and Repair areaccredited on the National QualificationsFramework of England, Wales and NorthernIreland (NQF).

The level in the qualification title shows the NQFlevel that each qualification is accredited at.

The qualification number is the qualificationaccreditation number.

Accredited CG no. Qual. no. qualification title

Level 3 IVQAdvanced Diploma inDiagnosticTechniques

- Light Vehicles 3905-05 500/5981/6- Heavy Vehicles 3905-06 500/5981/6

Level 5 IVQAdvanced TechnicianDiploma in DiagnosticTechniques


Level 5 IVQAdvanced TechnicianDiploma in MotorVehicle Engineering


Level 5 IVQAdvanced TechnicianDiploma in MotorVehicle

- Light Vehicles 3905-11 500/5983/X- Heavy Vehicles 3905-12 500/5983/X


Level 1 IVQCertificate in MotorVehicle Systems 3905-01 500/5966/X

Level 2 IVQTechnician Certificatein Motor VehicleSystems 3905-02 500/5967/1

Level 2 IVQDiploma in MotorVehicle Systems 3905-03 500/5964/6

Level 3 IVQTechnician Diploma inMotor VehicleSystems 3905-04 500/5965/8

England


Level 1 IVQCertificate in VehicleMaintenance andRepair 4101-71 500/5758/3

Level 1 IVQCertificate in VehicleMaintenance andRepair (VehicleValeting) 4101-72 500/5758/3

Level 1 IVQSpecialist Certificate in VehicleMaintenance andRepair 4101-71 500/5757/1

Level 1 IVQSpecialist Certificatein VehicleMaintenance and Repair (VehicleValeting) 4101-72 500/5757/1



and Repair

5.government.03

Key





IVQ Certificate




Office of the Qualifications andExaminations Regulator (Ofqual)(continued)


Level 2 IVQDiploma in VehicleMaintenance andRepair

- Light Vehicle 4101-73 500/5749/2- Heavy Vehicle 4101-74 500/5749/2- Motorcycle 4101-75 500/5749/2- Auto-electrical 4101-76 500/5749/2- Mobile Electrics and

Security 4101-77 500/5749/2

Level 2 IVQSpecialist Diploma inVehicle Maintenanceand Repair

- Light Vehicle 4101-73 500/5754/6- Heavy Vehicle 4101-74 500/5754/6- Motorcycle 4101-75 500/5754/6- Auto-electrical 4101-76 500/5754/6- Mobile Electrics and

Security 4101-77 500/5754/6


Level 3 IVQAdvanced Diploma inVehicle Maintenanceand Repair- Light Vehicle 4101-78 500/6064/8- Heavy Vehicle 4101-79 500/6064/8- Motorcycle 4101-80 500/6064/8- Auto-electrical 4101-81 500/6064/8- Air Conditioning and

Climate Control 4101-82 500/6064/8

Level 3 IVQSpecialist AdvancedDiploma in VehicleMaintenance andRepair

- Light Vehicle 4101-78 500/5835/6- Heavy Vehicle 4101-79 500/5835/6- Motorcycle 4101-80 500/5835/6- Auto-electrical 4101-81 500/5835/6- Air Conditioning and 4101-82 500/5835/6

Climate Control

Ofqual is the regulator of qualifications,examinations and assessments in England andof vocational qualifications in Northern Ireland.

Ofqual approves and distributes the criteria thatqualifications must meet in order to beaccredited on the NQF or QCF (Qualificationsand Credit Framework) and checks thatqualifications and the bodies that award themmeet these criteria.

England (continued)


Key



6.government.04




IVQ Certificate




South African Qualifications Authority (SAQA) www.saqa.org.za

Two levels of the IVQs in Motor Vehicle Systems are registered on theSouth African National Qualifications Framework (NQF).

Level 1 IVQ Certificate in Motor Vehicle Systems (3905-01)

Level 2 IVQ Diploma in Motor Vehicle Systems (3905-03)

NQF status can only be claimed by duly accredited MerSETA trainingproviders.

Further Educationand TrainingCertificate: MotorVehicle Systems

Level 4

South Africa

Combination of City & Guilds IVQs toachieve NQF registered qualification

Qualification Title on NQF

NQF Level

The South African Qualifications Authority (SAQA) is a statutory bodyestablished through an Act of Parliament. SAQA is the custodian of theSouth African National Qualifications Framework (NQF) and oversees thefurther development and implementation of the NQF.

Two levels of the IVQs in Vehicle Maintenance and Repair qualifications areregistered on theSouth African National Qualifications Framework (NQF).

Level 1 IVQ Certificate in Vehicle Maintenance and Repair (4101-71)

Level 2 IVQ Diploma in Vehicle Maintenance and Repair - Light Vehicle (4101-73) OR- Heavy Vehicle (4101-74)OR- Motorcycle (4101-75)OR- Auto Electrical (4101-76)OR- Mobile Electronics and Security (4101-77)

NQF status can only be claimed by duly accredited MerSETA trainingproviders.

Further Educationand TrainingCertificate: VehicleMaintenance andRepair

Level 4

Combination of City & Guilds IVQs toachieve NQF registered qualification

Qualification Title on NQF

NQF Level


and Repair

7.government.05

‘DIMO Automobile TrainingSchools offers students anunrivalled opportunity to gain theacclaimed City & Guildscertification in automobileengineering.

The School fosters the perfectenvironment for budding motorenthusiast to start off their careergeared with state-of-the-art toolsand equipment from Germany,including Mercedes-Benzautomobiles for hands-ontraining.

The School is the training arm ofDIMO Automobile which acts asthe agent in Sri Lanka for globalbrands including Mercedes Benz,Tata, Chrysler and Jeep.’

DIMO AUTOMOBILETRAINING SCHOOLSRI LANKA


Key



8.government.06




IVQ Certificate




Accreditations Council of Trinidad andTobago (ACTT)www.actt.org.tt

The Advanced TechnicianDiploma (3905), Technician Diploma (3905) andthe Advanced Diplomas (3905 and 4101) arerecognised by ACTT as available for delivery inTrinidad and Tobago by City & Guilds approvedcentres that are also registered by ACTT.

ACTT is the governing body for qualityassurance of post-secondary and tertiaryeducation in Trinidad and Tobago, including the accreditation and recognition of local andforeign training institutions, programmes,awards and awarding bodies.

City & Guilds has been recognised by ACTT as aforeign awarding body to offer post-secondaryand tertiary qualifications in Trinidad andTobago.

Trinidad and Tobago

Technical Education, Vocational andEntrepreneurship Training Authority(TEVETA)www.teveta.org.zm

The IVQs in Motor Vehicle Engineering havebeen recognised by TEVETA at the followinglevels of the TEVET Qualifications Framework(TQF):

TEVETA is responsible for registering alltechnical, entrepreneurial and vocationaltraining programmes offered in the country, theproviders that offer them and the examinationsthese programmes lead to.

Zambia

TQF level 3, Certificate



TQF Level 3, Skills Award

Institutions featured in this sectionare examples of universities andcolleges which have recognisedappropriate level(s) of the IVQs inMotor Vehicle Engineering foradmission to the relevant degree ordegree-linked programmes, with thepossibility of exemptions whereapplicable, as shown in eachindividual entry.

Levels shown indicate the levelsaccepted as minimum requirements.

Recognition and successfulcompletion of the recognised level(s)do not guarantee admission and eachapplication will be considered on anindividual basis.

Applicants will need to meet all otheracademic and non-academic entryrequirements, including the Englishlanguage proficiency set by therecognising institution.

HIGHEREDUCATION RECOGNITIONS


and Repair

9.higher education.01

HIGHER EDUCATION RECOGNITIONS



Key





IVQ Certificate




Durham Universitywww.dur.ac.uk

The University welcomesapplications from holders of a TechnicianDiploma or Advanced Technician Diploma.

All such applicants will be treated on anindividual basis, and considered on the merit,not only for entry itself, but also for any form ofaccreditation of prior learning or AdvancedStanding which might be appropriate.

All Engineering programmes require evidence ofperformance in Maths to the equivalent of atleast grade B at A level.

Durham University is one of the UK topuniversities and the third oldest in England,behind Cambridge and Oxford. There arearound 15,000 students, including over 3000international students from more than 120countries.

Durham is consistently ranked amongst theleading universities in the world and recognisedfor having world-class research in every singlearea of assessment across the sciences, socialsciences and humanities. The University’s MBAprogramme was ranked at eighth position in theUK and 53rd in the world, by the Economist.

United Kingdom

Entrance requirements are among the highest in Britain, but the dropout rate of less than 3 percent is also among the lowest in any university.

The city is picturesque and students who arelucky enough to secure a place at the Universitylive and study in the midst of a world heritagesite. University College, also know as the‘Castle’, was founded in 1832 and is the oldestuniversity building in the world.

Durham is a centre of sporting excellence andhas outstanding sport facilities. About 90% of thestudents play sport regularly.

Sheffield Hallam Universitywww.shu.ac.uk

Holders of the Advanced TechnicianDiploma will be considered for entry withadvanced standing, that is to the second andthird levels of the appropriate degrees.

Holders of the Technician Diploma will be considered for entry to the first year ofappropriate degree programmes.

All applications would be considered on anindividual basis and, as with all vocationalqualifications, the University will reserve theright to request additional qualifications toensure that the applicant is appropriatelyprepared for the demands of degree level study.

Sheffield Hallam University is one of the UK'slargest and most innovative universities, thebiggest provider of health and social care andteacher training.

Sheffield Hallam has 30,000 students, including3000 international students from 120 countries.The University has particularly strong linksacross Europe and Asia.

continued



and Repair


Key





IVQ Certificate




Sheffield Hallam is one of the UK’s largestproviders of sandwich courses and four-yeardegrees which include a paid work placement.

The University has build close relationship withleading global companies and its partnersinclude Sony, BP, Cisco, SAP and Microsoft.

Sheffield is one of the country’s most in-demandstudent destinations and is only thirty minutesdrive away from the beautiful Peak DistrictNational Park.

Macau Institute of Managementwww.mma.org.mo

Holders of an AdvancedTechnician Diploma (3905) or AdvancedDiploma (3905/4101) wishing to pursue furtherstudy with the Macau Institute of Managementin the Bachelor of Business Administrationprogramme (Chinese BBA) will be given a 40%block exemption.

Further exemptions may be granted, and allapplications will be dealt with on an individualbasis.

Macau Institute of Management (MIM) is theacademic arm of the Macau ManagementAssociation, a registered and recognised highereducation institution in Macau.

Established in 1988, the Institute has beenplaying a key role in the training of managementexecutives in Macau. MIM offers a wide range ofacademic programmes, leading to qualificationsrecognised by the Macau SAR Government.

China, Macau

University of Technology, Jamaicawww.utechjamaica.edu.jm

The University welcomesapplications from holders of an AdvancedTechnician Diploma or Technician Diploma.

Each student will be assessed on an individualbasis and given credit for equivalent workcompleted.

The University of Technology, Jamaica (UTech) isthe second largest university in Jamaica, offeringover 100 programmes to 11,000 students.

JamaicaUnited Kingdom (continued)




Key





IVQ Certificate




Colombo International Nautical &Engineering College (CINEC)On behalf of the University of SouthAustralia (UniSA)www.cinec.eduwww.unisa.edu.au

The Advanced Technician Diploma will beaccepted as entry qualification for admission tothe second year of the Bachelor of Engineering(OBIF) programme of the University of SouthAustralia.

The Technician Diploma will be acceptedas entry qualification admission to the first yearof the Bachelor of Engineering (OBIF)programme of the University of South Australia.

The Technician Certificate will beaccepted as entry qualification for admission tothe Foundation Programme.

Sri Lanka

Colombo International Nautical & EngineeringCollege (CINEC) is Sri Lanka's largest privatehigher education institution offering over 175training programmes to 14,000 students.

The Maleba campus of CINEC manages theBachelor of Engineering (OBIF) programme ofthe University of South Australia (UniSA).

Students study the first years of the four-yearprogramme at CINEC and transfer to UniSA forthe next two years. Each programme consists oftwo semesters per year of study and theduration of the semesters is of such that the foursemesters can be completed within 18 months,saving students time and money.

UniSA is one of the largest, fastest growing andinnovative universities in Australia. TheUniversity is part of the influential AustralianTechnology Network (ATN), an alliance of fiveprominent universities from each mainlandstate, and is ranked among the top 200universities in the world.

Organisations featured in this sectionare examples of leading corporatesand employer associations/groupswhich have recognised the IVQs inMotor Vehicle Engineering and theIVQs in Vehicle Maintenance andRepair for their quality and relevanceto the industry.

INDUSTRY RECOGNITIONS


and Repair

13.industry.01

INDUSTRY RECOGNITIONS

How employers view City & Guilds internationalqualifications

Having a City & Guildsqualification enhancesone’s career prospects

City & Guildsqualifications are anexcellent recruitmentbenchmark for theindustry

City & Guildsqualifications are anexcellent trainingsolution for employers

Outstanding learners for a relevant City & Guilds qualification will be considered for a placement

Applications arewelcome from City & Guilds graduatesseeking work within the sector

Priority will be given to applicants with a City & Guildsqualification whenrecruiting


14.industry.02

Sime Darby Industrial Sdn Bhnwww.tractorsacademy.com

Sime Darby Industrial Academy, part of SimeDarby, offers market-driven technical andmanagement training programmes for its staff,the public and corporate customers.

The Academy has been successfully trainedthousands of Malaysian youths and schoolleavers for employment in various industries inMalaysia, covering the fields of constructions,infrastructures, quarries, logging, mining, powergeneration and marine.

Sime Darby is a Malaysia-based multinationalcompany with core businesses in plantation,property, motors, industrial, energy and utilitiesand a growing presence in China and healthcare.The company’s operations span across 20countries and is supported by a team of over100,000 people worldwide.

Some of the famous brands represented bySime Darby include BMW, Rolls-Royce, MINI,Peugeot, Ford, Land Rover, Hyundai andMitsubishi (for passenger cars); Nissan, Renault,Mack, Hino and Mitsubishi Fuso (for trucks andcommercial vehicles) and Caterpillar (for heavyequipment)

Shanghai Automotive Industry Corporation(Group)www.saicgroup.com

Shanghai Automotive Industry Corporation(Group) (SAIC) is one of the top three automotivecorporations in China, employing 60,000workers. The company is mainly engaged in themanufacturing and sales of passenger andcommercial vehicles and components andrelated services.

SAIC is the leading manufacturer of passengervehicles in China and was ranked 359 in theFortune Global 500 list in 2009. The companyproduces its own branded products as well asthose included in its strategic partnership withGeneral Motors (Shaghai GM) and with theVolkswagen Group (Shaghai VolkswagenAutomotive). SAIC also holds 10% equity sharesof GM Daewoo.

The company has established its ownproduction bases across China and set upbranches in the US, Europe, Hong Kong, Japanand Korea.

Toyota Jamaicawww.toyotajamaica.com

Toyota Jamaica Limited (TJAM) is a companywith Toyota Tsusho Corporation of Japan having majority share holdings. TJL is the soleauthorised distributor for Toyota MotorCorporation of Japan and Daihatsu MotorCorporation.

Toyota Motor Corporation (TMC) is one of theworld's major producers of passenger cars. The company is the world's largest automakerby sales and owns the Lexus and Scion brands.TMC has a majority shareholding stake inDaihatsu and Hino Motors, and has also takenminority stakes in Fuji Heavy Industries (Subaru)and Isuzu Motors.

TMC operates 75 manufacturing companiesacross 28 countries, markets vehicles in morethan 170 countries and has a workforce of320,000 employees.

EUROPASS


and Repair

15.europass.01

Key





IVQ Certificate




Europass Certificate Supplementwww.cityandguilds.com/europasswww.uknec.org.uk europass.cedefop.eu.int

Each level of the IVQs in Motor VehicleEngineering (3905/8905) and the IVQs in VehicleMaintenance and Repair (4101) is supported bya Europass Certificate Supplement.

The Certificate Supplement helps to ensure thatqualifications are easily understood acrossnational systems and makes it easier for learnersto find employment or training opportunitiesbeyond the borders of their own country.

It provides details on the skills that candidatesare required to demonstrate in order to achievea City & Guilds certificate, helps learners toprepare for job interviews and allows employersto choose the best candidate to work for theirorganisation.

City & Guilds was the first UK awarding body tolaunch the Europass Certificate Supplement andstill the only one offering it across itsqualification portfolio.

City & Guilds1 Giltspur StLondon EC1A 9DDEngland

T +44 (0)20 7294 2468F +44 (0)20 7294 2400

www.cityandguilds.com

Every effort has been made to ensure thatthe information contained in thispublication is true and correct at time ofgoing to press. However, City & Guilds’products and services are subject tocontinuous development andimprovement and the right is reserved tochange products and services from time totime. City & Guilds cannot acceptresponsibility for any loss or damagearising from the use of information in thispublication.

©2012 The City and Guilds of LondonInstitute. All rights reserved.

City & Guilds is a trademark of the City andGuilds of London Institute. City & Guilds is aregistered charity (charity number 312832)established to promote education andtraining.

Documents

3905 4101 Recognitions List v2 (1)