WinterhillsoilresearchDetail

Construction Joint DetailScale 1:20

Lattice roof and foundation planScale 1:500

Lattice construction ModelScale 1:50

Key1. 60mm Sedum Blanket2. 60mm Growing Medium3. 40mm Drainage Layer4. 10mm DPM5. 120mm Insulation6.6. 20mm Plywood Board7. Gridshell Structure of 120 x 80mm spruce laths on 1 metre grid8. Concrete footing9. Steel pin Joint with bolted supports10.10. External timber brace11. Aluminium Profiled Gutter Sheet12. Water catchment grill

My main construction detail is used to try and hide the floor to roof connections of the lattice. I wanted the roof lattice to be a continual element from the earth, so

that the visitors disillusioned in thinking that the building is in actual fact part of the surrounding context. There were a number of

reasons why i chose the timber lattice as my main structure. These varying from structural to

aesthetic qualities. But the network like organisation on the organisation on the

lattice was a follow on from my initial concept.

1. 2.

3. 4. 5.

6.

7.

10.

12. 11.

9.

8.