Upload
others
View
33
Download
0
Embed Size (px)
Citation preview
CP7630 3/4” DRV IMPACT WRENCH CP7630-6 3/4” DRV IMPACT WRENCHWITH 6” EXTENDED ANVIL
• Ultimate torque: REV 1100 ft.lbs (1500 Nm)
• Twin hammer clutch • Metal housing
• Dual socket retainer • 4 power settings in
fwd and 2 in rev • Full teasing throttle
People. Passion. Performance.www.cp.com
Promotion valid until December 31st 2014, or while stocks last. All prices inclusive of GST.
• Ultimate torque: REV 1100 ft.lbs (1500 Nm)
• Twin hammer clutch • Metal housing
• Dual socket retainer • 4 power settings in
fwd and 2 in rev • Full teasing throttle
CP7782 1” DRV HEAVY DUTY ‘D’ HANDLE IMPACT WRENCH CP7782-6 1” DRV HEAVY DUTY
‘D’ HANDLE IMPACT WRENCH WITH 6” EXTENDED ANVIL
• Ultimate torque: REV 2140 ft.Ibs (2901Nm)• Rocking dog clutch• Ergonomic side handle• Protective cover on clutch housing• Dual hole and friction retainer• Full teasing trigger• 3 position power regulator in both directions
• Ultimate torque: REV 2140 ft.Ibs (2901Nm)• Rocking dog clutch• Ergonomic side handle• Protective cover on clutch housing• Dual hole and friction retainer• Full teasing trigger• 3 position power regulator in both directions
CP7748 • Ultimate torque:
REV 922ft.lbs (1250Nm)• Twin hammer clutch• Lightweight (only 2.0kg) • Thermo-plastic rubber grip • 360° degree swivel fitting• 3 Power settings
CP7748
OR
$31000BONUSCP COOLER
BAG BONUSCP WATCHBONUS
1/2” DRV COMPOSITE BODY HEAVY DUTY IMPACT WRENCH
$81000
$79900
• Ultimate torque: REV 1440 ft.Ibs (1950Nm)• S2S Technology• Composite Body• Twin Hammer Clutch• Lightweight (only 3.5kg)
and compact
CP7779 1” DRV HEAVY DUTY IMPACT WRENCH
• Ultimate torque: REV 415 ft.lbs (563Nm)• S2S Technology• Composite body• Twin hammer clutch• Lightweight (only 1.26kg)
and compact (163mm long)• 3 Power settings
BONUSLED TORCH and
WERA TOOL
CP7729 3/8” DRV COMPACT IMPACT WRENCH
$38800
ULTRA COMPACT IMPACT WRENCHES
Ultra-compact and powerful impact wrench designed for difficult work in confined spaces. Smaller than your fist, these new wrenches can fit virtually anywhere your hand can!
• Ultimate torque REV 725 ft.Ibs (983Nm)• S2S Technology• Composite Body• Twin hammer clutch• Lightweight (only 1.98kg) and compact (186mm long)• 3 power settings
1/2” DRV HEAVY DUTY IMPACT WRENCHCP7749-2
S2S CP PATENTED TECHNOLOGYis the market’s most convenient one handed forward and reverse design.
$82000
$37000
BONUSCP MAGNETIC
TRAY +
SS413WP
BONUSWERA TOOL
+ COVER
112mm
NEW3/8” DRV$29000
CP77313/8” DRV ULTRA COMPACT IMPACT WRENCH• Ultimate torque: REV 415 ft.lbs (563 Nm)
$29000CP77321/2” DRV ULTRA COMPACT IMPACT WRENCH• Ultimate torque: REV 450 ft.lbs (610 Nm)
NEW
$64500 NEW$68500
The extranet dedicated to CP Tools distributors
www.cp.com/cloud
CPCloud
www.cp.com
Promotion valid until December 31st 2014, or while stocks last. All prices inclusive of GST.
• Powerful and durable• 1.12HP (850W) Motor• 5/8”-11 Spindle thread• Ergonomic left or right
hand handle
$44000
• Grinding and cutting machine• 5 x Cut-off wheels and 9 x
grinding wheels included• Side exhaust directs air away
from work area• Compact and light weight for
easy access in tight areas• Max rpm: 20,000
• Compact, lightweight design for easy use• 90° angle head allows flexibility in
confined spaces• Complete with 1/4” and 6mm collets• Excellent for high speed
blending, smoothing, porting and deburring in confined areas
• Heavy duty carry case
$16300 $29400
• Powerful and compact, 128mm long • Torque range: 5-27 ft.lbs (7–35Nm) • Quick release socket system • Comfortable rubber grip
CP9426 - 1/4” Drv
$19900CP9427 - 3/8”Drv
$20800
• Torque range: 10-50 ft.lbs (13–68Nm)• 160rpm• Compact and powerful
CP886 - 3/8” Drv
$12500CP886H - 1/2”Drv
$12500
CP9426/7 1/4” AND 3/8” DRV MIGHTY MINI RATCHETS CP886/H 3/8” AND 1/2” DRV HEAVY DUTY RATCHETS
CP875K HEAVY DUTY DIE GRINDER KIT CP7500D KIT 2” HEAVY DUTY GRINDER AND CUTTER KIT
• Powerful and durable• 0.8Hp (600W) high performance• M14 Spindle thread• Lightweight
$29900
CP9121AR 5” HEAVY DUTY ANGLE GRINDER CP9123 7” HEAVY DUTY
ANGLE GRINDER4.5” HEAVY DUTY ANGLE GRINDERCP3450-12AC45
$15000
• 4.5” (115 mm) Wheel capacity
• Industrial quality • 1.1hp (810W) High torque motor • 12,000rpm Free speed • 3/8”-24 Spindle thread • Aluminium body • Constant lubrication bevel gear design • Insulating composite
cover
$55500
1/4” (6MM) ANGLE DIE GRINDERCP9108QB
• Mini 120° die grinder• High efficient and powerful
0.32hp (240W) motor• High free speed: 25,000rpm• Low noise level: only 81 dB(A)• Variable top speed regulator• Composite overmould grip• Includes 1/4” and
6mm collets• Rear exhaust
1/4” (6MM) MINI DIE GRINDERCP876 1/4” (6MM)
DIE GRINDERCP3109-19• 1/4” (6mm) collet holder • Super Industrial quality • Powerful 0.8hp (600W)
governed motor • 19,000rpm free speed • Robust steel housing • Thermo insulated composite
over-housing • Streamlined safety lever • Rear exhaust
$12000
128mm
121mm
• 1/4” and 6mm collets included• High free speed 30,000rpm• Compact and lightweight• Built in regulator
$91000
Premium Tool
People. Passion. Performance.
Promotion valid until December 31st 2014, or while stocks last. All prices inclusive of GST.
CP7300RQC1/4” (6 mm) REVERSIBLE COMPACT DRILL• Industrial quality Jacob’s keyless chuck • Ergonomic grip and lightweight • Planetary gearing with brass bushings for
low wear and long life • Adjustable exhaust
CP8793/8” (10mm) ANGLE DRILL• Compact low profile head• Reversible• High performance gearing
CP97923/8” (10mm) HEAVY DUTY PISTOL DRILL• Keyless chuck• Reversible• Industrial quality Jacobs chuck
CP97911/2” (13mm) HEAVY DUTY PISTOL DRILL• Keyless chuck• Reversible• Industrial quality Jacobs chuck
DRILLS
$73000$49000$20500CP9882 - 3/16” (4.8mm) CP9883 - 3/16” (4.8mm) CP9884 - 1/4” (6.4mm)
A range of riveters for general maintenance or light duty production: • Includes a variety of nose pieces • Transparent container for rivet ends • Heavy pulling power: General Maintenance • CP9882 2200 lbs (1000 kg) Light Duty Production • CP9883 1900 lbs (865 kg) • CP9884 3530 lbs (1600 kg)
CP988X Series RIVETERS
• High lighting power: 30 LED’s, 2250 Lux @ 50 cm / 55 Lumens • Rechargeable Li-ion battery • Fast charging time: 3.5 hours • LONG Working time: 6.0 hours • 120° adjustable magnetic base • 360° swivel hook • Waterproof: IP65 grade • 4 positions: Half light, Full light, Flashing and Off
$9900
CP8006 POWERFUL LED WORK LIGHT
CP8873/8” (10 mm) IN-LINE DRILL • High performance
Jacob’s chuck • Built in regulator
for efficient control • Powerful and fast • Durability and
productivity • Perfect tool for
vertical drilling and to reach confined areas
$21500
$18000
$18500
$17800
$24700
• 19 x 3mm steel needles• Adjustable needle sleeve• 35mm wide chisel, 1/2” shank• Quick change chisel retainer• Ideal for general surface prep work
CP7120 NEEDLE SCALER AND CHIPPER
• Superior design with internal spring components provides greater durability
• Needle capacity 12 X 1/8” (3mm) • Low Vibration• 4000 blows per minute• Lightweight
CP0951 COMPACT INDUSTRIAL NEEDLE SCALER
• Single head scaler for industrial applications• Furnished tungsten carbide tipped cross bit• Ideal for removal of thick scale, heavy
corrosion and hard coating.
B14A INDUSTRIAL PISTON SCALER
$34000 $63500$62700
NEW
• 0.3hp (210W) powerful orbital sander • True oil-free operation to keep contaminants away
from your sanding process • Central-vacuum model fitted with Hook and Loop pad • Great for surface preparation from body filler to paint primer
• Specs: max rpm 12,000• Powerful 160w motor• Colour coded
CP7225CVE (2.5mm orbit)CP7255CVE (5mm orbit)CP7215CVE (10mm orbit)
CP72X5 Series 6” RANDOM ORBITAL PALM SANDERS
$24000EA.
$54600
CP9XX4 Series 6” RANDOM ORBITAL SANDERS
CP9534 (5mm orbit)
$59000CP9674 (10mm orbit)
Please find your local contact at: www.cp.comEnglish © Copyright 2014All prices include GST. All products were available in reasonable quantities at the time of printing this catalogue. CP Australia will do all things reasonably possible to maintain stocks advertised but cannot be responsible for the unavailability of such products as a consequence of the failure of supplier or service providers to deliver within the specified period and any other circumstances beyond the control of CP Australia. Images are for illustrative purposes only. Due to printing processes, colours in catalogue may vary from actual item. Freight charges may apply into regional areas.
Available from:
1/2” DRV THIN WALL WHEEL PROTECTOR SOCKET SETSSS413WP3 PIECE SOCKET SET• Sizes 17, 19, and
21mm
• Sizes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26 and 27mm
SS4114D - DEEP
$9900
SS4114 - STANDARD
$6300
SS4114/D 1/2” DRV 14 PIECE SOCKET SETS
SS414WP4 PIECE SOCKET SET• Sizes 17, 19, 21 and
22mm
$4200 $4900
• Composite hose reels in both CLOSED and OPEN
• Highest quality components • Superior durability - tested
up to 25000 cycles • New crimping system • Fully repairable - Individual spare parts available - Includes DIY repair manual • Quality, safety and fully pressure tested • Rubber protection over the crimping • Premium POLYURETHANE HOSES
NEW HIGH QUALITY AND DURABLE CP HOSE REELS8940171993• Hose Diameter: 10mm (3/8”)• Hose Length: 16m (52.5ft)
$399008940171999• Hose Diameter: 13mm (1/2”)• Hose Length: 16m (52.5ft)
$55900
8940172001• Hose Diameter: 10mm (3/8”)• Hose Length: 21m (68.9ft)
$719008940172003• Hose Diameter: 13mm (1/2”)• Hose Length: 16m (52.5ft)
$78900
Promotion valid until December 31st 2014, or while stocks last. All prices inclusive of GST.
• Sizes 26, 27, 29, 30, 32, 35, 36 and 38mm
SS618D - DEEP
$17400
SS618 - STANDARD
$11500
SS618/D 3/4” DRV 8 PIECE SOCKET SETS
FILTER, REGULATOR AND LUBRICATORSProper air preparation will improve the performance of your air tool (more power) and make your tool last longer (saving you money)
• Aluminum body • Protected gauge • Liquid level indicators• Polycarbonate bowl • High flow
89401719271/4” FRL• 2080 (l/min) Max Air Flow• 15 bar Proof pressure
$12000
89401719283/8” FRL• 2100 (l/min) Max Air Flow• 15 bar Proof pressure
$13500
89401719291/2” FRL• 2600 (l/min) Max Air Flow• 15 bar Proof pressure
$14500
NEW• Sizes 27, 30, 32, 33, 35, 36, 38 and 41mm
SS818D - DEEP
$23000
SS818 - STANDARD
$21500
SS818/D 1” DRV 8 PIECE SOCKET SETS
Accuracy 4% according to EN ISO 2003 specifications. Includes calibration certificate. Long lasting accuracy up to 25000 cycles. Easy and precise torque adjustment with fine scale graduation. 54 teeth fixed pear head ratchet with quick socket release
CP TORQUE WRENCHES
CP89051/4” TORQUE WRENCH 5-25NM
$17900
CP89103/8” TORQUE WRENCH 20-100NM
$18500
CP89151/2” TORQUE WRENCH 40-200NM
$20500
CP89203/4” TORQUE WRENCH 150-750NM
$59500
CP89251” TORQUE WRENCH 200-1000NM
$89900
NEW
Made in ITALY