385C FS ®

Cat® C18 Diesel Engine with ACERT® TechnologyNet Power (ISO 9249) at 1800 rpm 390 kW/530 hp

Operating Weight with 5.7 m3 rock bucket, 650 mm shoes 90 600 kgMaximum Travel Speed 4.5 km/hMaximum Drawbar Pull 592 kNMaximum Reach 10 350 mmMaximum Height 11 260 mm

Front Shovel

2

Hydraulics

Proportional Priority PressureCompensated (PPPC) system withstate-of-the-art electronic controlensures hydraulic system efficiencyand excellent productivity. pg. 6

385C FS Front ShovelDesigned for aggressive digging and fast cycle times, this high performance loading tool delivers the dependability you need to maximize your productivity.

Undercarriage and Structures

The undercarriage supports the swingbearing and upper structure of the 385C FS. It must transmit the reactionforces of digging operations from theupper structure to the ground; therefore,the strength of the undercarriage is amajor factor in machine durability. pg. 5

✔

✔

✔

✔ New feature

Engine

The Cat® C18 engine has state-of-the-artACERT® technology to meet emissionregulations with exceptional performancecapabilities, fuel efficiency and provenreliability. pg. 4

Environmentally Responsible Design

Quieter operation, lower engineemissions, less fluid disposal andcleaner service can help you meet orexceed worldwide regulations andprotect the environment. pg. 4

Developed specifically for high productionmining applications, the 385C Front Shoveldelivers high bucket fill factors and fast cycle times to maximize your productivity.Designed and built to meet the performanceand reliability expectations of Cat customers,this machine delivers dependability.

3

Front Linkage

The 385C FS is equipped with astandard boom, stick and several bucketoptions, offering excellent reach anddigging forces. Parallelogram linkagekeeps the bucket parallel to the groundduring material penetration and themaster cylinder maintains a level bucketwhile raising the boom. pg. 7

Operator Station

An all-new cab provides improvedvisibility and comfort. The new monitoris a full-color graphical display withenhanced functionality to providesimple, comprehensive machineinterface. pg. 8

✔ ✔

Service and Maintenance

Fast, easy service has been designedin with extended service intervals,advanced filtration, convenient filteraccess and user-friendly electronicdiagnostics for increased productivityand reduced maintenance costs. pg. 9

Complete Customer Support

Your Cat dealer offers a wide rangeof services that can be set up under acustomer support agreement when youpurchase your equipment. The dealerwill help you choose a plan that cancover everything from machine andattachment selection to replacement. pg. 10

4

Environmentally Responsible DesignCaterpillar machines not only help you build a better world, they help maintain and preserve the fragile environment.

Outstanding performance.Many features designed to provideoutstanding performance which can mean more work done in a day, less fuel consumption and minimalimpact on our environment.

Low exhaust emissions. The Cat C18diesel engine utilizes unique ACERTtechnology to meet exhaust emissionsregulations while assuring optimum fuel efficiency.

Quiet operation. The hydraulicallydriven cooling fan is thermostaticallycontrolled, so the fan only runs at thespeed necessary to maintain correctsystem operating temperatures. Theresult is cool quiet operation with lessdisturbance to the surroundingenvironment.

Ozone protection. To help preserve the earth’s ozone layer, the airconditioning unit uses only R-134arefrigerant which does not containharmful chlorofluorocarbons (CFC’s).

Fewer leaks and spills. Engine oil andencapsulated hydraulic oil filters arepositioned vertically and are easy to reachto minimize spillage. Service intervals areextended to reduce the times fluids arechanged and handled. The new hydraulicoil fine filtration system attachmentextends the service interval from 2000 to5000 hours. Compatible with Cat HEEShydraulic bio-oil for ecologically sensitiveapplications. Finally, the new CatExtended Life Coolant extends service (up to 6000 h) so there is less need forfluid disposal.

EngineA combination of innovations working at the point of combustion, ACERT technologyoptimizes engine performance while meeting EU Stage II and Stage IIIA emission regulations.

Diesel Engine. The Caterpillar C18, with ACERT technology, is a 18.1 liter,six-cylinder, 390 kW (530 hp) enginewith mechanically actuated electronicfuel injection (MEUI) and overheadcamshaft. ACERT technology providesoutstanding engine performance throughadvanced electronic control, precisionfuel delivery, and refined airmanagement.

Fuel Consumption. The AdvancedDiesel Engine Management (A4)controller uses sensors throughout the engine to manage engine load andperformance. The A4 controller is themuscle behind engine responsiveness,self-diagnostics, controlling emissions,and fuel economy.

Fuel System. C18 engine uses amechanically actuated electricallycontrolled unit injection (MEUI)system. The MEUI system combineshigh- pressure injection and electroniccontrol in a single compact unit. The electronic unit injector is anintegral part of the C18 fuel system.Computerized electronic controlprovides precise metering and timing of fuel injection.

Cooling System. High capacity,side-by-side cooling system allowsoperation in ambient temperatures up to 52˚C. The Electric Power Control(EPC) controls the fan speed based oncoolant temperature and hydraulic oiltemperature for optimized cooling.

Turbocharger. The C18 engine uses a water-cooled, center-section wastegated turbocharger for improvedperformance. This turbocharger controlsthe air volume to the cylinders andworks efficiently during low and highload conditions.

Emissions. ACERT Technology is a differentiated technology thatreduces emissions at the point ofcombustion. The technology capitalizes on proven Caterpillarleadership in three core engine systems:fuel, air and electronics.

Cold Weather Starting Kit. The kit consists of two additionalbatteries, heavy-duty harness, large capacity starting motor, and the ether starting aid. With this kit, the excavator has the capability to start at -32˚C.

5

Undercarriage and StructuresDurable undercarriage absorbs stresses and provides excellent stability.

Travel Motors. Two-speed axial pistonhydraulic motors provide the 385C FSdrive power. Speed selection is auto-matic when the high-speed position isselected. Travel motors have internaldisk brakes to hold the machine whenstationary. The travel motors areprotected from damage by rigid covers.

Upper Frame. Rugged main frame isdesigned for maximum durability andefficient use of materials.� Robot welding for consistent,

high-quality welds.� Outer frame utilizes curved side rails,

which are die-formed, for excellentuniformity and strength throughoutthe length.

� Box section channels improveupper frame rigidity under the cab.

� Boom tower and one piece main rails.� New boom foot design transfers load

more efficiently with less stress incritical areas.

� Reinforced lift cylinder and swingdrive mounts increase structuredurability in rock and quarryapplications.

Track. The 385C comes standard withthe new grease lubricated track calledGLT4. The track links are assembledand sealed with grease to decreaseinternal bushing wear, reduce travelnoise and extend service life loweringoperating costs.

Track Rollers. Track rollers are a heavy-duty type with increased strength forlonger life. They also use solid pinsfor retention of the collars and a moresecure design.

Idler Guards and Track Guides.Idler guards and center track guides used to maintain track alignment arestandard. Optional two-piece full-lengthtrack guiding guards are available for additional protection on steep side slopes.

Final Drives. The final drives are thethree-stage reduction planetary type. This design results in a complete drive/brake unit that is compact and delivers excellent performance and reliability.

Carbody Design. The advanced carbodydesign stands up to the toughestapplications. � Modified X-shaped, box-section

carbody provides excellent resistanceto torsional bending.

� Upper structure weight and stressesare distributed evenly across the fulllength of the track roller frame.

� Robot welding ensures consistent,high-quality welds throughout themanufacturing process.

6

HydraulicsCaterpillar hydraulics deliver power and control to keep material moving at high volume.

Power Management Control.The pump-valve electronic controlleris central to power managementcontrol and provides highly efficientcontrol for the pumps, valves andengine.

Swing Performance. The three-pumpsystem with independent swinggives priority to the swing circuit forstrong swing acceleration and easilycontrolled multi-function operation.

Biodegradable Hydraulic Oil.Biodegradable hydraulic oil isavailable as an option.

Component Layout. The hydraulic pumps,control valve and hydraulic tank are locatedclose together to minimize the length ofpiping. The swing control valve is mounteddirectly on the swing motor. Main and swingpump suction and discharge lines have largediameters. These large diameters, combinedwith the component layout, guarantee highefficiency.

Auxiliary Hydraulics. An auxiliary valve is standard on the 385C FS and is used for the bottom dump circuit. It is drivenelectrically based on commands from the pump-valve controller.

Front Linkage Hydraulic System.The hydraulic system for the implementconsists of two boom cylinders, a stickcylinder, two bucket cylinders, two bottomdump cylinders and a master cylinder.

Hydraulic Oil Filtration System.The 385C FS hydraulic system features six standard filters in four types.These filters improve reliability, extend the life of hydraulic equipment and hydraulic oil, boost performance and reduce running costs. A fine filtrationsystem is available as an attachment.

Third Pedal for Straight Travel (attachment).A third pedal for straight travel is availableas an attachment. This pedal allows straightmachine travel using only a single pedal.

Hydraulic System. The 385C FShydraulic system includes a three-pumpsystem with an independent swingcircuit and a hydraulic circuit utilizingthe proven Proportional PriorityPressure Compensated (PPPC) system.It features Caterpillar-developedelectronic control and activation toensure high hydraulic system efficiencyand excellent productivity.

PPPC System. The load sensing PPPCsystem provides the following features:� Cylinder speed is directly related to

operator’s movement of the joystickfrom feathering to full speed.

� Flow to cylinders during multi-functional operation is directlycontrolled by the operator and isnot dependent on loads.

� Controller reduces pump outputto minimum to save power whenjoysticks are in neutral position.

7

Front LinkageThe 385C FS delivers higher production and efficiency to all jobs.

Parallelogram Linkage. The Cat 385C FS Front Shovel featuresparallelogram-type front linkage with a master cylinder. The parallelogramlinkage automatically keeps the bucketparallel to the ground. This allowsexcellent penetration, fast loading and asmooth floor clean-up. The operator canconcentrate on the boom and stickrather than bucket adjustments. The master cylinder circuit auto-matically maintains a level bucket while raising the boom. It aids in bucketpositioning both above and belowgrade, eliminating constant adjustmentduring the work cycle. The mastercylinder arrangement also uses bucketcylinder circuit pressure to increase the boom lifting force.

Boom. The boom is 4.6 m long andfeatures a rigid structure with a numberof steel castings. The cast steel portionsare structured into a box to reduce the weight of the boom nose and boom foot.

Stick. The 385C FS offers a 3.4 m longstick. The stick nose and stick foot aremade of cast steel. The middle portionhas a box structure fabricated with steelplates. The stick cylinder-mountingbracket is reinforced from the inside.

Bottom Dump Bucket.The recommended bucket for the 385C FS is a bottom dump bucket. It is designed for strength, performanceand long service life.

Linkage Pin. All pins used in the 385C FS front linkage have thickchrome plating, giving them highwear and corrosion resistance. The diameter of each pin is made as large as possible to smoothlydistribute the shear and bendingloads associated with the digging and lifting forces.

8

Cab Design. The workstation has beendesigned to be spacious, quiet andcomfortable for the operator, assuring high productivity throughout the entireworkday. Switches are convenientlylocated for easy access. The new monitoris located to provide excellent visibilityand access.

Seat. The seat provides a variety ofadjustments, including fore/aft, height and weight to suit the operator. Also included are adjustable armrests and a retractable seat belt. For additionalcomfort, a new heated air suspension seat is available as an attachment.

Skylight. An enlarged skylight withsunshade provides excellent visibility and good ventilation.

Hydraulic Activation Control Lever.The hydraulic activation control leverdeactivates hydraulic functions duringengine start-up, and preventsunintentional machine operation.

Climate Control. Positive filteredventilation with a pressurized cab comesstandard. Fresh air or re-circulated air canbe selected with a switch on the leftconsole.

Windows. To maximize visibility,all glass is affixed directly to the cabeliminating the use of window frames.Choice of fixed or easy-to-open splitfront windshield meet operatorpreference and application conditions. � 50/50 split front windshield allows

both upper and lower portions to bestored in an overhead position.

� 70/30 split front windshield stores the upper portion above the operator.The lower front windshield features a rounded design to maximizedownward visibility and improveswiper coverage.

� Both openable versions feature a one-touch action release system.

� The fixed front windshield is availablein standard duty laminated glass orhigh impact resistant laminated glass.

Wipers. Parallelogram wiper, includinga washer nozzle is mounted below thecab windshield, optimizes the operator’sviewing area and offers continuous andintermittent modes.

Monitor. The compact, full-color,graphical display monitor is new. The monitor has functions to displaymachine, maintenance, diagnostic and prognostic information. The angleof the monitor can be adjusted to face the operator and prevent sun glare.

Cab Exterior. The exterior design usesthick steel tubing along the bottomperimeter of the cab, improving theresistance of fatigue and vibration.This design allows the FOGS to bebolted directly to the cab, at the factoryor as an attachment later, enabling the machine to meet specifications and job site requirements.

Cab Mounts. The cab shell is attachedto the frame with viscous rubber cabmounts, which dampen vibrationsand sound levels while enhancingoperator comfort.

Cab Riser. To provide excellent forwardvisibility for truck loading and otherapplications, an 870 mm cab riser is standard on the 385C Front Shovel.

Operator StationDesigned for simple, easy operation and comfort, the 385C FS allows the operator to focus on production.

9

Electronic Control SystemManages the engine and hydraulics for maximum performance.

Monitor Display Screen. The monitor isa full color 400x234 pixels Liquid CrystalDisplay (LCD) graphic display.The Master Caution Lamp blinks ON andOFF when one of the critical conditionsbelow occurs:� Engine oil pressure low� Coolant temperature high� Hydraulic oil temperature highUnder normal conditions or the defaultcondition, the monitor display screenis divided into four areas; clock and throttle dial, gauge, event display andmulti-information display.

Clock and Throttle Dial Display. The clock,throttle dial and gas-station icon with greencolor are displayed in this area.

Gauge Display. Three analog gauges,fuel level, hydraulic oil temperatureand coolant temperature, are displayed in this area.

Event Display. Machine event informationis displayed in this area along with the iconand language.

Multi-information Display. This areais reserved for displaying information that is convenient for the operator.The “CAT” logo mark is displayed whenno information is available to display.

Operator Gain/Response. This is used tosuit the operators preference or application.� Quicker, for fast response and more

production� Slower, for more precision� Three preset settings with 21 available

Electronic Joysticks. Electronic joy-sticks provide features not possible withhydraulic pilot valves:� Eliminate pilot lines in cab for quieter

operation� Adjustable gain/response

Consoles. Redesigned consoles feature a simple, functional design to reduceoperator fatigue, ease of switchoperation and excellent visibility. Both consoles have attached armrestsand allow the height of the armrests to be adjusted.

Standard Cab Equipment. To enhanceoperator comfort and productivity,the cab includes a lighter, drink holder,coat hook, service meter, literatureholder, magazine rack and storagecompartment. The cab can be equippedwith optional 12 volt converter and up to two 12V-7 amp electrical sockets toprovide additional electrical resources.

Machine Security. An optional Machine Security System (MSS) is available from the factory. MSS uses a special Caterpillar keywith an embedded electronic chip for controlling unauthorized machineoperation.

Product Link. “Product Link Ready”from the factory.

10

Complete Customer SupportCat dealer services help you operate longer with lower costs.

Machine Selection. Make detailed comparisonsof the machines you are considering beforeyou buy. What are the job requirements,machine attachments and operating hours?What production is needed? Your Cat dealercan provide recommendations.

Purchase. Consider the financing optionsavailable as well as day-to-day operating costs.This is also the time to look at dealer servicesthat can be included in the cost of the machineto yield lower equipment owning and operatingcosts over the long run.

Customer Support Agreements. Cat dealers offer a variety of productsupport agreements, and work withcustomers to develop a plan the bestmeets specific needs. These plans can cover the entire machine,including attachments, to help protect the customer’s investment.

Operation. Improving operatingtechniques can boost your profits.Your cat dealer has videotapes,literature and other ideas to help youincrease productivity, and Caterpillaroffers certified operator trainingclasses to help maximize the return on your investment.

Product Support. You will find nearlyall parts at our dealer parts counter.Cat dealers utilize a worldwidecomputer network to find in-stock parts to minimize machine downtime.You can save money with Catremanufactured components.

Maintenance Services. Repair optionprograms guarantee the cost of repairsup front. Diagnostic programs suchas Scheduled Oil Sampling, CoolantSampling and Technical Analysis help you avoid unscheduled repairs.

Replacement. Repair, rebuild orreplace? Your Cat dealer can helpyou evaluate the cost involved soyou can make the right choice.

Service and MaintenanceFast, easy service has been designed in with extended service intervals, advanced filtration,convenient filter access and user-friendly electronic diagnostics.

Service Intervals. Service intervalsare extended to reduce maintenancecosts. Engine oil, oil filter and fuelfilters at 500 hours.

Oil Sample and Pressure Ports.Oil sample and pressure portsprovide easy checking of machinecondition and are standard on every machine.

Hydraulic Capsule Filters. The return filters orcapsule filters for the hydraulic system are locatedbeside the hydraulic tank. The filter elements areremovable without spilling hydraulic oil.

Service Points. Service points are centrally locatedwith easy access to facilitate routine maintenance.

Pilot Hydraulic System Filter. Pilot hydraulic systemfilter keeps contaminants from the pilot system and is located in the pump compartment.

Remote Greasing Block. A concentrated remotegreasing block on the boom delivers grease to hard-to-reach locations.

Radial Seal Cleaner. Radial seal main air cleanerwith precleaner has a double-layered filter elementfor more efficient filtration. No tools are required to change the element.

Fuel-Water Separator. The water separator removes water from fuel, even when under pressure,and water level can be monitored in the cab.

11385C Front Shovel specifications

Engine

C18 with ACERT Technology

Net Power at 1800 rpm

ISO 9249 390 kW/530 hp

EEC 80/1269 390 kW/530 hp

Bore 145 mm

Stroke 183 mm

Displacement 18.1 liters

� All engine horsepower (hp) are metricincluding front page.

� The C18 engine meets EU directive97/68/EC Stage II and from January2006 it will meet Stage IIIA emissionrequirements.

� Net power advertised is the poweravailable at the flywheel when theengine is equipped with fan, aircleaner, muffler, and alternator.

� No engine derating required below2300 m altitude.

Drive

Maximum Travel Speed 4.5 km/h

Maximum Drawbar Pull 592 kN

Swing Mechanism

Swing Speed 6.2 rpm

Swing Torque 260 kNm

Undercarriage

Track Width

Standard 650 mm

Optional 750 mm

Number of Shoes Each Side 47

Number of Track Rollers Each Side 8

Number of Carrier Rollers Each Side 3

Weights

Operating Weight with 5.7 m3

rock bucket, 650 mm shoes 90 600 kg

Hydraulic System

Main/TravelCircuit Closed center, load sensing

Pump Piston, variable

Maximum Flow at rated speed 2x490 l/min

Relief Valve Setting

Main 320 bar

Travel 350 bar

Number of Main Pumps 2

SwingCircuit Open center, load sensing

Pump Piston, variable

Maximum Flow at rated speed (total) 450 l/min

Relief Valve Setting

Accelerating 260 bar

Number of Swing Pumps 2

PilotCircuit Open center

Pump Gear

Maximum Flow at rated speed 90 l/min

Relief Valve Setting

Controls 41 bar

Number of Pilot Pumps 1

CylindersBoom

Bore 180 mm

Stroke 1415 mm

Master

Bore 152 mm

Stroke 1953 mm

Stick

Bore 220 mm

Stroke 1855 mm

Bucket

Bore 178 mm

Stroke 1810 mm

Bottom Dump

Bore 160 mm

Stroke 275 mm

Service Refill Capacities

Liters

Fuel Tank 1240

Cooling System 101

Engine Oil 65

Swing Drive (each) 19

Final Drive (each) 21

Hydraulic system (including tank) 995

Hydraulic tank 810

Cab/FOGS

� Cab/FOGS meets ISO10262:1998.� Standard air conditioning system

contains environmentally friendlyR134a refrigerant.

Sound

Operator Sound� The operator sound level measured

according to the procedures specifiedin ISO 6394:1998 is 76 dB(A), forcab offered by Caterpillar, whenproperly installed and maintained andtested with the doors and windowsclosed.

� Hearing protection may be neededwhen operating with an open operatorstation and cab (when not properlymaintained or doors/windows open)for extended periods or in noisyenvironment.

Exterior Sound� The labeled spectator sound power

level measured according to the testprocedures and conditions specifiedin 2000/14/EC is 109 dB(A).

12

BA

DK

C GJ H

E

FL

1 2 3

385C Front Shovel specifications

DimensionsAll dimensions are approximate.

Buckets for K SeriesTM Tooth System

mm

Boom 4600

Stick 3480

A Boom top height 4500

Cab top height

with FOPS 4660

without FOPS 4520

B Engine hood height

without handrail 3460

with handrail 3530

mm

C Overall width (retracted)

650 mm shoes 3400

750 mm shoes 3500

C Overall width (extended)

650 mm shoes 4160

750 mm shoes 4260

D Upperstructure width 3470

E Tail swing radius 4590

F Minimum ground clearance 850

mm

G Overall length 14 250

Counterweight removed 13 790

Bucket and stick removed 8600

Boom, bucket and stick removed 7460

H Track length 5840

J Track gauge width

Extended position 3510

Retracted position 2750

K Width over walkways 4390

L Counterweight clearance 1630

m3 mm mm kg

5.7 2760 2684 10 400

6.5 2760 2881 10 765

5.7 2760 2684 10 600

4.6 2760 2630 9880

5.2 2760 2573 10 650

5.7 2760 2684 11 050

1 Rock

2 Rock with spill plate

3 Heavy Duty Rock

Heavy Duty Rock reinforced

Weight Capacity Width Tip Radius

13

BAD

O

1

2

3

4

12 11 10 9 8 7 6 5 4 3 2 1 0 m

1

2

3

4

5

6

7

8

9

1O

11

12

m

FE

C

G

385C Front Shovel specifications

Working Ranges

Stick Length

Boom Length

Rock Bucket

A Maximum Reach

B Maximum Reach at Ground Level

C Maximum Level Crowd Distance

D Maximum Digging Depth

E Maximum Digging Height

F Maximum Dump Height

G Reach at Maximum Dump Height

Bucket Breakout Force* (ISO)

Stick Breakout Force* (ISO)

* Forces shown are for 5.2 m2 rock bucket

M3.4JBmm 3480

mm 4600

m3 5.2

mm 10 350

mm 9900

mm 3920

mm 2850

mm 11 260

mm 7430

mm 5690

kN 538

kN 429

14 385C Front Shovel specifications

Standard Equipment Standard equipment may vary. Consult your Caterpillar dealer for specifics.

ElectricalAlternator – 75 ampLights working

Cab interiorCab mounted, twoFrame mountedStorage box mounted, one

Signal/warning horn

Engine/PowertrainAir filter with pre-cleanerAutomatic engine speed controlAutomatic swing parking brakeAutomatic travel parking brakesCaterpillar C18 ATAAC with ACERT

technology, altitude capability to 2300 m without derating

Fuel filterHigh ambient cooling, 52°C capabilitySide-by-side cooling system with

separately mounted AC condenser and variable speed fan

Two speed travelWater separator, with level indicator,

for fuel line

GuardsFOGS (Falling Object Guard System)

including overhead and windshieldguards

Heavy duty bottom guards on upperframe

Heavy duty swivel guard onundercarriage

Heavy duty travel motor guards onundercarriage

Idler and center section track guiding guards

Quarry application (cylinder guard,swing motor and drive guard)

Operator StationAdjustable armrestAir conditioner, heater and defroster

with automatic climate controlAshtray and 24 volt lighterBeverage/cup holderCab riser 870 mmCapability to install 2 additional pedalsCoat hookConsole mounted electronic type

joysticks with adjustable gain andresponse

Electrical provision fro seat heaterEU sound criteria packageFloor mat, washableHigh resistant cab windowInstrument panel and gauges with full

color graphical display, start up levelchecks

Joystick, thumb wheel modulationjoystick for use with front shovelbottom dump bucket

Literature compartmentNeutral lever (lock out) for all controlsPositive filtered ventilation,

pressurized cabRear window, emergency exitRetractable seat belt 51 mm widthSliding upper door windowStationary skylight (polycarbonate)Storage compartment suitable for

lunch boxSunshade for windshield and skylight24V radio ready (harness, 2 speakers,

flexible type antenna)Travel control pedals with removable

hand leversUtility space for magazinesWindshield wipers and washers

(upper and lower)Windshield One-piece high impact

resistant

Undercarriage650 mm clipped double grouser shoes,

standard length, variable gaugeGrease lubricated track GLT 4Hydraulic track adjustersSteps – four

Other Standard EquipmentBoom and stick reducting valveCat branded XT hosesCat batteriesCaterpillar one key security system with

locks for doors, cab and fuel capCat walks – left side and right sideCross-roller type swing bearingHeavy lift modeHigh pressure cut offHydraulic circuit for bottom dump

bucketMirrors – left and rightS•O•SSM quick sampling valves for

engine oil and hydraulic oilSteel firewall between engine and

hydraulic pumpsWiring provisions for Product Link,

Auto-lube System and lighted beacon

15385C Front Shovel specifications

Front LinkageBoom 4600 mmStick 3480 mmBuckets (see chart on pg.12)Tips, cutting edge protection segments,

and sidebar protector

TrackDouble grouser shoes 750 mm

GuardsTrack guiding guards

Two piece full length

Miscellaneous OptionsAuto-lubrication device including boom

and stick (not bucket) Bio-degradable hydraulic oil

(saturated, synthetic ester, 5000 hours change interval)

Converters, 7 amp-12V– One– Two

Counterweight removed deviceElectric refueling pump without shut offFast fill engine oil systemFast fill fuel systemFine filtration filterHydraulic tank shut-off valveJump start terminalsOil quick change systemRadiator screenReversible cooling fan including

protective screenStarting aid for cold weather with etherStick lowering control deviceTravel alarm with cut off switch

Operator CompartmentLunch box storage with lidMachine security system with

programmable keysRadio

AM/FM radio mounted in right handconsole with antenna and twospeakers

Radio ready mounting at rear locationincluding 24V to 12V converterspeakers, antenna

SeatAdjustable high-back seat with

mechanical suspensionAdjustable high-back seat with air

suspensionAdjustable high-back heated seat with

air suspensionStraight travel pedal

Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for specifics.

HEHH3118 (07/2005) hr

www.CAT.com

© 2005 Caterpillar

®

385C FS Front Shovel

All Rights Reserved

Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.