Upload
jessica-vaughn
View
221
Download
0
Tags:
Embed Size (px)
Citation preview
3600 and 3601
Drying Storage Cabinets
3600 and 3601
Drying Storage Cabinets
© 2006 RM Michaelides Software & Elektronik GmbH
From Users – For Users
3600 Drying Storage Cabinet
Why Do You Need Dry Storage?
• RoHS Requires Higher Temperatures For Reflow Soldering
• Components Complying with RoHS must be more Resistant to Temperature than Conventional Components.
• Higher Process Temperatures Increase the Requirements on the Storage of Moisture-Sensitive Components.
• The Plastic Packages of ICs particularly Absorb Water. This Water Evaporates during Soldering and Applies Pressure to the Packages.
• Stress caused by Water Vapor (1700 times the Volume of Water) inside the Package Leads to Delamination and/or Cracks (Popcorn Effect).
From Users – For Users
3600 Drying Storage Cabinet
Delamination = • Delamination is a Form of Failure of Laminated
Composite Materials. Repeated Cyclic Stress, Impact etc. can cause Layers to Separate, Forming a Mica-Like Structure of Separate Layers, with Significant Loss of Mechanical Toughness. Delamination is an Insidious kind of Failure as it Develops inside the Material, without being Obvious on the Surface, much like Metal Fatigue.
Delamination Problems may be Detected in the Material by its Sound: Solid Composite has Sharper Sound, while Delaminated Parts sound Dull. Other Non-Destructive Testing Methods Involve Embedding Optical Fibers coupled with Optical Time Domain Reflectometer Testing of their State, Testing with Ultrasound, Infrared Imaging, etc.
From Users – For Users
3600 Drying Storage Cabinet
Popcorn Effect
Humidity Pressure caused by Reflow Soldering Irreparable Damage Occurs
From Users – For Users
3600 Drying Storage Cabinet
From Users – For Users
3600 Drying Storage Cabinet
IPC/JEDEC J-STD-033B Requires
• Storage at 5%, 10% or 20% RH
• Classification of Different Levels
• A Link to the Standard can be Found at www.rmcan.com
From Users – For Users
3600 Drying Storage Cabinet
IPC / JEDEC J-STD-033B Standard
5% Level 4, 5, 5a
10% Level 3
20% Level 2
Vom Anwender – für den Anwender
3600 Drying Storage Cabinet
Innovative Drying Storage Cabinet
• Developed by Users for Users
• New, Simple and Affordable Technology UsingCompressed Air
• Controlled Use of Compressed Air(NOT Permanently Used)
• Humidity Level under 5% Guaranteed by theOptional Use of Nitrogen ≥ 1 % Possible as well
• Extendable by Two Additional 3601 cabinets(6 Chambers), all of them Controlled by the 3600 Control Display
From Users – For Users
From Users – For Users
3600 Drying Storage Cabinet
Innovative Drying Storage Cabinet
• RM Michaelides Realized that a Drying Storage Cabinetmust Provide Different Humidity Levels.Therefore, RM Developed a Drying Storage Cabinet withThree Separate, Independently Controlled Chambers.
• Different Humidity Levels can be Set for each Chamber.
• Low Consumption and Costs
• Operating Data Provided via CAN, RS232, Bluetooth,USB, WLAN or GSM
• Integration into Process Traceability is Possible
Compressed Air Control Performed by the Drying Storage Cabinet (Example)
Act
ua
l /
Set
po
int
Hu
mid
ity(
%)
From Users – For Users
3600 Drying Storage Cabinet
Door Opened
Humidity Returns to Pre-Determined Level
Controlled Intake of Compressed Air
From Users – For Users
3600 Drying Storage Cabinet
Example for how the Control Works in an Extreme Case:
Target Setpoint Value: 1% RH
From Users – For Users
3600 Drying Storage Cabinet
Stable Conditions in the Cabinet: Duration 30 min
From Users – For Users
3600 Drying Storage Cabinet
Application Example
Two 3601 Drying Storage Cabinets Connected to a 3600 Drying Storage Cabinet
From Users – For Users
3600 Drying Storage Cabinet
Storing WholeFeeders
Suitable Accessories such as Storage Containers or Reel Storage Racks
PCB StacksStorage Containers in Different Sizes
From Users – For Users
3600 Drying Storage Cabinet
RM MichaelidesSoftware & Elektronik GmbH
Donaustrasse 14D-36043 FuldaGermany
Phone: +49 661 9490-300Fax: : +49 661 9490-333Email: [email protected]
www.rmcan.com