356 A Carrera Oil Cooler Brackets & Ducting - Amazon S3 · 356 A Carrera Oil Cooler Brackets & Ducting. Ducting is reproduction made in Belgium 20+ years ago for Bob Garretson. Cooler

356 A Carrera Oil Cooler Brackets & Ducting

Ducting is reproduction made in Belgium 20+ years ago for Bob GarretsonCooler mount blocks from Classic Parts in Germany – Peter Hoffman

Cut this edge to fit nose of car



Make parts oversize and cut these edges to fit nose of car

This part is cut out to clear turn signal inside nose







Bracket to mount cooler mount block to fender brace made out of 4mm flat stock.



If Non Carrera, steel headlight bucket drain will need to be removed.Will interfere with cooler location.



Use C/SC rubber drain in place of steel drain tube. Bend forward over cooler shroud.



This bracket is an original Porsche part from an A carrera delivered to Argentian – Per Mike Smith in UK who supplied them to me





Documents

356 A Carrera Oil Cooler Brackets & Ducting - Amazon S3 · 356 A Carrera Oil Cooler Brackets & Ducting. Ducting is reproduction made in Belgium 20+ years ago for Bob Garretson. Cooler