8/7/2019 3300DSE

http://slidepdf.com/reader/full/3300dse 1/2

Trimble 3300 Total StationEconomical, easy-to-use Direct Reflex 3D measurement system 

 Whether you work as atopographic cadastral orconstruction surveyor, or aremeasuring to targets that aredifficult to reach, the Trimble3300 Total Station range delivershuge versatility and Direct Reflex(DR) capabilities ideal for datacapture and field computations.

DR Measurement Mode

The innovative DR EDM systemoption is ideal for surveying wherethe target is difficult, impossibleor dangerous to reach. It opensup a new world of measurementapplications. Objects that werepreviously difficult or impossibleto measure, can now be measuredas easily as those measured witha prism. Property boundaries andcorners can be measured withoutgaining land access. Overheadcables, tunnels, bridges, quarry faces, building and elevations can allbe measured quickly and easily. DR combined with the coaxial visiblespot facilitates aiming in interiorapplications making the 3300 idealfor interior survey work. This systemenables you to measure to any object within 70 m (230 ft) (Kodak Grey Card 18% reflective) and up to 100 m(328 ft) (Kodak Grey Card 90%reflective), with no need for a prism.

Rugged, Tough and Portable

The 3300DR range provides anexceptional solution to a wide range of measurement applications. Featuringa small, water-resistant and ruggedyet lightweight body, the instrumentis capable of operating for many hours on a small internal battery. Andeverything you need for a day’s work,excluding the tripod, fits into a singleand easy-to-carry case.

Key Features

nd Benefits

Direct Reflex 

capability 

Visible Pointing Laser 

Easy to operate

Graphical Support

Rugged and

Lightweight

Versatile, compact, economical Trimble 3300 Total Station for everyday survey work 

Easy to Use for 

Immediate Productivity 

The instrument has been designedso that even an inexperiencedoperator can be fully operational within a few minutes of startup.Time-consuming startupprocedures have been eliminated.Simply level up, switch on andbegin work. With a seven-key 

control panel and a menu-drivenuser interface with softkeys, youcan immediately access all relevantfunctions.

Using the 3300, you canrapidly measure distances up to5000 m (3.1 miles) with a singlekeystroke. And for stakeout, thetracking measure mode repeatsmeasurements, providing rapidcountdown to the point required.

Data Capture and Field Computations

The 3300 is ideal as a stand-alone measuring and stakeoutinstrument. With internal memory,the instrument becomes a self-contained system with a datacollector, operating cable-freefrom the same built-in battery. Additionally, as the instrument isfitted with a bi-directional serial

communications port, it can beconnected to a range of controller’ssuch as the TSCe™ and the TDSHP48.

 With many standard featuresfor today’s surveyor the Trimble3300DR Total Station is a true3D Direct Reflex measuringsystem for your projects, today andtomorrow.

8/7/2019 3300DSE

http://slidepdf.com/reader/full/3300dse 2/2

Trimble 3300 Total Station

   ©    2

   0   0   3 ,

   T   r   i   m   b   l   e   N   a  v   i   g   a   t   i   o   n   L   i   m   i   t   e   d .

   A   l   l   r   i   g   h   t   s   r   e   s   e   r  v

   e   d .

   T   r   i   m   b   l   e   i   s   t   r   a   d   e   m   a   r   k   o   f   T   r   i   m   b   l   e   N   a  v   i   g   a   t   i   o   n   L   i   m   i   t   e   d   r   e   g   i   s   t   e   r   e   d   i   n   t   h   e   U   n   i   t   e   d   S   t   a   t   e   s   P   a   t   e   n   t   a   n   d   T   r   a   d   e   m   a   r   k   O   f   f   i   c   e .

   T   h   e   G   l   o   b   e   &   T   r   i   a   n   g   l   e   l   o   g   o ,

   I   n   t   e   g   r   a   t   e   d   S  u   r  v   e  y   i   n   g

 ,   a   n   d   T   S   C   e   a   r   e   t   r   a   d   e   m   a   r   k   s   o   f   T   r   i   m   b   l   e   N   a  v   i   g   a   t   i   o   n   L   i   m   i   t   e   d .

 Angle measurement

 Accuracy (Standard deviation based on DIN 18723) 

3303 3" (0.9 mgon)3305/3306* 5" (1.5 mgon)

 Angle reading (least count) 

3303 1" (0.2 mgon)

  3305/3306 1" (0.5 mgon)

 Automatic level compensator Single-axis compensator ±5' (±90 mgon)Distance measurement

 Accuracy  Prism

  Standard measurement ±(2 mm + 2 ppm) (0.007 ft + 2 ppm) Tracking  ±(5 mm + 2 ppm) (0.016 ft + 2 ppm)

Reflex tape Standard measurement ±(3 mm + 2 ppm) (0.01 ft + 2 ppm)

 Tracking  ±(5 mm + 2 ppm) (0.016 ft + 2 ppm)

Direct reflex mode

  Standard measurement ±(3 mm + 2 ppm) (0.01 ft + 2 ppm) Tracking  ±(10 mm + 2 ppm) (0.032 ft + 2 ppm)

Shortest possible range:

(to prism) 1.5 m (4.9 ft) [not in long range mode](to reflective foil) 2.5 m (8.2 ft)

Measuring time

Prism mode

  Standard measurement 2 s   Tracking  1.2 s

  Direct reflex mode

  Standard measurement 3 s up to 30 m +1s/10m   Tracking  1.6 s

Range (at standard clear**)

  Measurement to prism  1 prism 3000 m (9,840 ft)  1 prism Long Range Mode 1000–5000 m (3,280–16,400 ft)  3 prisms 5000 m (16,400 ft)  3 prisms Long Range Mode 1000–7500 m (3,280–24,600 ft)

  Range using Reflex Tape

  Reflective foil 20 mm Normal 100 m (328 ft)  Reflective foil 20 mm Long Range Mode 200 m (656 ft)  Reflective foil 60 mm Normal 250 m (820 ft)  Reflective foil 60 mm Long Range Mode 800 m (2,620 ft)

  Range Direct Reflex measurement (typically)

  Kodak Gray (18% reflective) 70 m (230 ft)Kodak Gray (90% reflective) 100 m (328 ft)

* Internal data memory is not available for 3306.** Standard clear: No haze, overcast or moderate sunlight with very light heat shimmer.

Range and accuracy are dependent on atmospheric conditions and background 

radiation.

PERFORMANCE SPECIFICATIONS

Software 

  Topographic Software  Coordinate Geometry Software

Known Station Establishment Free Station  Area Calculation Connecting DistancesHeight Transfer

Polar Measurement Stakeout SoftwareEccentric Point StakeoutRemote Object Height Reference LineVertical PlanePoint to Line

Memory capacity options* Recording: internal data memory, storagecapacity – 1900 data lines

Data input/output: External recording and data transfer viaRS-232 C / V24 interfaceData record formats selectable: For M5,

Rec 500, R4 and R5

* Internal data memory is not available for 3306 

ORDERING INFORMATION

GENERAL SPECIFICATIONS

Light source Laserdiode 660 nm class 1 to prism;class 2 direct reflex

Beam divergence 0,4 mrad

 Atmospheric correction manual setting pressure and temperature

Leveling 

Circular level in tribrach circular level/tubular level10'/2mm / 30"/2mm

Clamps and slow motions coaxial

Centering 

Centering system Trimble 3-pin or DINOptical plummet Magnification 2xShortest focusing distance 0.5 m (1.6 ft)

 Telescope

Magnification 26 x Aperture 40 mm (9.51 inch)Field of view at 100 m 2.9 m (9.5 ft)Shortest focussing distance 1.5 m (4.92 ft)Illuminated crosshair  Yes

Display screen automatic contrast adjustment, display illumination 4 lines with 21 characterseach, graphic capabilities (128 x 32 pixels)

Keyboard 7 keys, variable function keys

Operating temperature –20 °C to +50 °C (–5 °F to +122 °F)

 Water proofing  IP54

Power supply 

Internal battery  NiMH battery pack, 6 V, 1.3 Ah,rechargeable; charging time with singlecharger approx. 2.5 hrsOperating time: Approx 1000 angle anddistance measurements

 Weight

Instrument

incl. battery/case 3.5 kg / 2.5 kg (7.7 lbs / 5.5 lbs)

Dimensions

Instrument 173 × 268 × 193 mm(6.88 × 10.5 × 7.68 inch)

  Trunnion axis height,

 Trimble 3-pin or DIN 196 mm / 175 mm (7.7 inch / 6.9 inch)

Certified quality in accordance with DIN ISO 9001/EN 29001.

 

CLASS I and II LASER PRODUCT

Complies with 21 CFR 1040.10

For further information please contact your nearest Trimble Authorized

Distributor or Trimble Office.

 You may also visit our website at http://www.trimble.com

 YOUR LOCAL TRIMBLE OFFICE OR REPRESENTATIVE

N O R T H A M E R I C A  

 Trimble Geomatics and

Engineering Division

5475 Kellenburger Road,

Dayton, Ohio 45424-1099,

U.S.A.

800-538-7800 (Toll Free)

+1-937-233-8921 Phone

+1-937-233-9441 Fax 

www.trimble.com

E U R O P E

  Trimble GmbH

Am Prime Parc 11,

65479 Raunheim,

GERMANY 

+49-6142-2100-0 Phone

+49-6142-2100-550 Fax 

 A S I A - P A C I F I C

  Trimble Navigation

Singapore PTE Limited

80 Marine Parade Road

#22-06, Parkway Parade

Singapore 449269

SINGAPORE

+65-6348-2212 Phone

+65-6348-2232 Fax 

SOFTWARE AND RECORDING

Specifications and descriptions are subject to change without prior notice.