3200, VX-4100, VX-4200 - Leximco Holdings MGM60 MGM70 MGM600 MGM700 Motorola GM140, CDM750, PRO3100, GM160, CDM1250, PRO5100,GM338, GM340, GM360, GM380, GM640, GM660, GM1280 IDM400

1

LEXIMCO presents multifunctional modules and controllers for professional radio communication. Our products provide the following features:

• multilevel protection of radio talks; • digitisation of analog radios and systems; • fleet control and management over the radio channel (over the air) in

conventional system; • management repeater access; • Remote re-keying OTAR; • Encryption algorithms AES, DES, GOST; • GPS-data transmission.

Compatible radio

• MP - Motorola P040, GP308, CT150, P080, CT450 • MGP - Motorola PRO3150, GP140, GP328, HT750, PRO5150, GP338, HT1250,

PRO7150, GP340, GP360, GP380, GP680 • MGM - Motorola GM140, CDM750, PRO3100, GM160, CDM1250,

PRO5100,GM338, GM340, GM360, GM380, GM640, GM660, GM1280 • IDM - Icom IC-F3G/GS, IC-F4GT/GS, IC-F14/S, IC-F15/S, IC-F16/S, IC-F26/S,

IC-F24/S, IC-F25/SIC-F30GT/GS, IC-F31GT/GS, IC-F40GT/GS,IC-F41GT/GS, IC-F40GT/GS MT Version, IC-F41GT/GS MT Version, IC-F30GT-L, IC-F30GS-L, IC-F31GT-L, IC-F31GS-L, IC-F43TR, IC-F33GT/GS, IC-F34GT/GS, IC-F43GT/GS, IC-F44GT/GS, IC-F70T/S, IC-F80T/S, IC-F110, IC-F111, IC-F121, IC-F210, IC-F211, IC-F221, IC-F110S, IC-F111S, IC-F121S, IC-F210S, IC-F211S, IC-F221S, IC-F510, IC-F520, IC-F521, IC-F610, IC-F620, IC-621, IC-F620TR, IC-621TR, IC-F610 MT Version, IC-F620 MT Version, IC-FR3000, IC-FR3100, IC-FR4000, IC-FR4100, IC-F1710, IC-F1721/D, IC-F2710, IC-F2721/D, IC-F1810, IC-F1821/D, IC-F2810, IC-F2821/D.

• VDM - VX-210, VX-400, VX-600, VX-800, VX-900, VX-410, VX420, VX-3200, VX-4100, VX-4200

• MCP - Motorola CP140, CP160, CP180, GP3688, EP450, PR400. • MCM - Motorola CM160, CM360, GM3688, EM400, CM300, PM400.

2

• TDM - Tait Orca Portables Radios nd T2000 Mobiles • RDM - radios of "closed architecture" - Motorola GM300, M208, Kenwood TK2107,

TK270/370(G), TK760, Vertex VX2000, VX3000, Standard GX1608, Yeasu VX510 etc.

Security Level 400 - low level - analog scrambling

• 70 Light (NEW) - high level - digital encryption • 700 (NEW) - maximum level - digital encryption

Signalling cost option (only for digital modules)

• - - without signaling (only speech protection) • S - extra option of subscriber with control and management features • SOB - extra option of subscriber with OTAR-Basic and control and

management features

Free encryption option

• DES - option with DES algorithm • AES - option with AES algorithm (standard option for export)

CBR Controllers

Repeater controller 700R

Dispatcher controller - DS system DM

Dispatcher controller - OTAR-Basic DOB

_________________________________________

3

Speech safety devices

LEXIMCO modules have different features - from speech safety devices (modules with only function speech protection against the unauthorized eavesdropping and listening-in ) up to various subscriber’s modules (the devices realizing and function speech protection and various signalling functions of the control and management)

The main function speech safety devices is the security of the radio communication, protection of negotiations against the interception, the non-authorized access

LEXIMCO modules provide solution for secure voice applications over two-way radio systems with several levels of security:

Low level - analog scrambling (frequency inversion of speech spectrum). It is implemented in D400 series modules.

High level - digital encryption (voice compression and transmission of speech in form of "radio noise" or "white noise") with over 1 million keys. True digital encryption! Implemented in D70 Light series modules.

4

Highest level - digital encryption (voice compression and transmission of speech in form of "radio noise" or "white noise") with over 4 billion keys. True digital encryption! Implemented in D700 series modules.

LEXIMCO security devices for radios

Analogue scramblers

D400

Digital modules D70 D700 Compatible radios

MP400 MP60 MP70 MP600 MP700 Motorola P040, GP308, CT150, P080, CT450

MGP400 MGP60 MGP70 MGP600 MGP700

Motorola PRO3150, GP140, GP328, HT750, PRO5150, GP338, HT1250, PRO7150, GP340, GP360, GP380, GP680

MCP400 MCP60 MCP70 MCP600 MCP700 Motorola CP140, CP160, CP180, GP3688, EP450, PR400

MCM400 MCM60 MCM70 MCM600 MCM700 Motorola CM160, CM360, GM3688, EM400, CM300, PM400

MGM400 MGM60 MGM70 MGM600 MGM700

Motorola GM140, CDM750, PRO3100, GM160, CDM1250, PRO5100,GM338, GM340, GM360, GM380, GM640, GM660, GM1280

IDM400 IDM60 IDM70 IDM600 IDM700

Icom IC-F3G/GS, IC-F4GT/GS, IC-F14/S, IC-F15/S, IC-F16/S, IC-F26/S, IC-F24/S, IC-F25/SIC-F30GT/GS, IC-F31GT/GS, IC-F40GT/GS,IC-F41GT/GS, IC-F40GT/GS MT Version, IC-F41GT/GS MT Version, IC-F30GT-L, IC-F30GS-L, IC-F31GT-L, IC-F31GS-L, IC-F43TR, IC-F33GT/GS, IC-F34GT/GS, IC-F43GT/GS, IC-F44GT/GS, IC-F70T/S, IC-F80T/S, IC-F110, IC-F111, IC-F121, IC-F210, IC-F211, IC-F221, IC-F110S, IC-F111S, IC-F121S, IC-F210S, IC-F211S, IC-F221S, IC-F510, IC-F520, IC-F521, IC-F610, IC-F620, IC-621, IC-F620TR, IC-621TR, IC-F610 MT Version, IC-F620 MT Version, IC-FR3000, IC-FR3100, IC-FR4000, IC-FR4100, IC-F1710, IC-F1721/D, IC-F2710, IC-

5

F2721/D, IC-F1810, IC-F1821/D, IC-F2810, IC-F2821/D.

VDM400 VDM60 VDM70 VDM600 VDM700

Vertex Standard VX-210, VX-400, VX-600, VX-800, VX-900, VX-410, VX420, VX-3200, VX-4100, VX-4200

- TDM60 TDM70 TDM600 TDM700 Tait Orca Portables Radios nd T2000 Mobiles

RDM400 RDM60 RDM70 RDM600 RDM700

radios of "closed architecture" - Motorola GM300, M208, Kenwood TK2107, TK270/370(G), TK760, Vertex VX2000, VX3000, Standard GX1608, Yeasu VX510 etc

Modules LEXIMCO for radios Motorola Professional GP-, GM-series, Commercial CP, CM-series, P040/080, Icom IC-F-series, Vertex Standard VX-series, Tait are designed according to requirements of the interface specification

and are connected to the radio via special flex or socket.

RDM module is designed specially for the radios of other companies-manufacturers, that don't have the socket for connecting different optional devices. This module is connected to the radio using soldering with the wires to the breaks

in audio paths.

Programming of modules:

programming software Config_User for all LEXIMCO modules;

programmer RDM9 or RDM9/USB - for ALL LEXIMCO modules out of the radio;

standard programming set Motorola (RIB RLN4008 plus cable-programmer) for LEXIMCO modules MP, MGP, MGM, MCP, MCM being part of the radio;

6

From analog radio to digital radio communication or digitisation of analog radios and systems

Development of the world market of radio communication systems is characterized by wide introduction of digital technologies. Digital trunk systems in comparison with analog systems provide higher efficiency and security of communication, data transmit, full list of communication services.

It is not a secret that the main difficulty for the wide spread of well-known brands of digital trunk communication systems (TETRA, APCO-25, Tetrapol, iDEN etc.) is rather high cost of the equipment.

Implementation of digital modules allows to make reasonably priced modernization of the existing analog systems of conventional and trunk communication (particularly MPT1327) up to the level of true digital radio communication.

7

Right away we should mention that there is no possibility to form several digital audio channels at one pair of radio frequency in the communication system advanced using LEXIMCO devices. Besides there are no integral means of data and services transmission provided by leading manufacturers of digital trunk standards.

The main advantage of the advanced communication system is providing with higher level of security and confidentiality of communication. These very requirements are the main for professional, departmental and technological radio communication systems. Encryption of the communication transmitted in digital form makes unauthorized eavesdropping almost impossible.

Other advantages of the improved communication system using LEXIMCO devices:

• Either conventional and trunk (particularly MPT1327) communication systems suit for modernization.

• Low cost of modernization. There is no need in artificial implementation of digital infrastructure. There is no need in using additional special repeaters and base stations.

8

• The same frequency range is used. • Most of analog radios of the leading manufacturers suit for modernization

(Motorola, Standard Vertex, Icom, etc), i.e. you may use the equipment available in system.

• Repeaters operating in the communication system become digital after being equipped with CBR-700R controllers.

CBR-700R controller provides digital stream regeneration. That allows transmitting the speech via unlimited number of retransmission levels.

9

• Modernized radios can operate both in digital and in analog modes. • The rules of maintenance and operation of communication system aren't

changed. • Signaling modules (subscriber modules -S and dispatcher modules -D)

allow implementing dispatcher system D-DS on base of existing conventional communication system. Dispatcher system protects from unauthorized access to the system (to the repeater).

• Upgrading of LEXIMCO devices makes possible further modernization of communication system according to the requirements of the customer.

CBR Controllers

CBR (controller base radio) Controllers are control devices of base radio or repeater.

Controllers CBR Model

Repeater controller 700R

Dispatcher controller of system DS DM

Dispatcher controller OTAR-Basic DOB

CBR Controllers are connected to base radio (repeater) and serial port RS232 of personal computer PC. Motorola radio is optimum radio for connection to CBR, as it is a Plug-In connection. System manager can use different Motorola radios - GM300 or GM340, GM360, GM380, GM140, GM160 etc. Also system manager can use other base radios (Icom, Tait, Kenwood, etc), but connection to CBR will be via soldering. The power supply of the controller is provided from radio's power supply +12 VDC. If PC has only USB port system manager must use adapter USB-RS232.

10

CBR-700R Repeater controller

CBR-700R Repeater controller is designed to control the operation of the repeater. It is used in radio system with digital modules D700 and D70 series.

Main features of CBR-600R:

• Common features of Basic Repeater Controller (RICK) • Synchronous scanning the channels of the radios forming the repeater • Organizing different levels of access for radios with signaling modules

(into DS) • Re-transmitting of D700 and D70 modem signals

CBR-DM Dispatcher controller

CBR-DM Controller is the element of dispatcher (administrator) computerized working place (CAD) of DS system and is designed for management and control

subscriber radios (with S modules)

11

CBR-DOB Dispatcher controller

CBR-DOB Controller is the element system manager's computerized workplace of DS system with OTAR-Basic function and is designed for management and

control subscriber radios (with SOB modules)

______________________________________________

OTAR

OTAR (Over-The-Air-Rekeying) - common name of the method of changing the encryption keys in a two-way radio system over the radio channel. This method is realized through different key management systems (KMS) and signaling protocols.

12

LEXIMCO digital modules and devices use their own air interface protocol 1200 bps (DS-1200) for functions control, management and rekeying (OTAR). The DS1200 signalling protocol allows radios with subscriber modules to send and receive digital information over a radio channel.

Possibilities OTAR operates with functions of the control and management.

Functions of DS system with OTAR

• Air monitoring with displaying on the PC's monitor of all traffic and key management messages;

• Record-keeping (recording to the archive file of the hard disc of all traffic and key management messages);

• Secure rekeying (from 1 to 16 user's keys); • Check (the radio is switched on and is within the coverage area); • Kill (irrecovered disablement of the LEXIMCO module); • Restriction of the subscriber (temporary restriction for receive and/or

transmit of the subscriber); • Emergency (message sent by the subscriber in critical situation); • Listen (secret mode of radio's transmit); • SMS (sending by system manager short alphanumeric messages to the

radio - individual secret command from other subscribers) - only for Motorola and Vertex radios with display;

Main distinctions of OTAR-Basic:

• Manual entry voice encryption keys VEKs (non automatic) by system manager;

• Changing of VEKs in real time and particularly (non group); • Encryption of key management messages (KMM) by individual encryption

key; • Protect KMM from enemy's interception and inhibits replay message in

later time; • Encryption of traffic messages (PTT-ID, Check, Emergency, etc) by

distinct key TEK (traffic encryption key).

DS system with OTAR-Basic includes:

• workplace of system manager (communication center): o personal computer PC o OBS program o CBR-DOB controller o base radio

• subscribers (user's units) o SOB modules o subscriber radios

13

Devices and modules with OTAR function

OTAR-Basic is a key management system realized in a two-way radio system with digital SOB modules and CBR-DOB controller.

Subscriber digital module SOB

Subscriber digital modules SOB are devices supporting functions:

• digital encryption of voice • control and management • OTAR-Basic (SOB)

Functions of different digital modules

Functions MP, MGP, MGM

MCP, MCM

IDM, ADM TDM RDM

OTAR + + + + +

PTT-ID + + + + +

Emergency + + +/- - -

14

Check + + + + +

Kill + + + + +

Restrict + + +/- + +

Listen + + +/- + +

Display Decode + + - - -

+ function enable - function disable +/- function enable only if radio is modificated

Programming of SOB modules is carried out using:

• programming software CONFIG for all LEXIMCO modules • standard programming set Motorola (RIB RLN4008 plus cable-

programmer) for LEXIMCO modules MP, MGP, MGM, MCP, MCM being part of the radio

• programmer RDM9 - for ALL LEXIMCO SOB out of the radio modules

CBR-DOM Controllers

CBR-DOB Controllers are the main system elements of a manager's computerized workplace of DS system with OTAR-Basic function and are designed for management and control subscriber radios (with SOB modules).

15

CBR-DOB set includes cable-adaptor for connection to Motorola GM radio.

The power supply of the controller is provided from 13 pin of radio accessory connector (+12 VDC).

SOB subscriber modules are devices that support features of remote control, management and rekeying over the air (radio channel) from the system manager (administrator) of D-DS system with OTAR function.

DS System DS System is a conventional system of radio communication that uses its own DS1200 signaling protocol.

16

The characteristic feature of the dispatcher system of radio communication DS is complex task solution on:

• Control and management of mobile objects (subscribers) from the dispatcher workplace equipped by PC;

• Protection of the negotiations from eavesdropping (analog-digital and digital encryption);

• Access restriction of the subscribers to the radio channel of the repeater; • GPS-location of mobile objects (if equipped with GPS-receiver).

System DS is CAD's (Computer-Aided Dispatch) system of fleet management and designed for monitoring and control of mobile objects

DS Functions

• Monitoring of the working channel with depicting on the PC screen dates, time, ID of the radio user currently speaking or sending the emergency signal, and also all the requests of the dispatcher and answers of the users radios (viewing the entire day's traffic).

• Logging (writing to the archive file at hard disc) date, time, ID of the radio user currently speaking or sending the emergency signal, and also all the requests of the dispatcher and answers of the users radios.

17

• Check - verification the operability of specific radio user. • Kill - remote disable for stolen or lost radios. • Individual Call of the specific radio user by the dispatcher - IndCall • Group Call by the dispatcher of the group of users - GrCall • Setting the specific radio user for transmitting (listening mode) - Listen

DS Navigational functions

(for the radios Motorola GM equipped with signaling module plus GPS receiver)

• Location of the radio user upon the request of the dispatcher • Automatic location of the radio user (automode)

DS system components

1. Dispatcher center:

• Personal computer with dispatcher program DSS; • Motorola GM radio with dispatcher module MGM600D;

or

• Motorola GM radio (or other radio) with dispatcher controller CBR-300DM?? (without encryption/decryption).

Dispatcher program DSS. The dispatcher provides control and management of the mobile objects from the working place equipped PC.

• Work with any scanned map (bmp format) • Calibration map on 2 or 3 points

Note. Map and Navigational functions are unessential elements for work of DS.

Dispatcher module is a computer based coder/decoder of signaling DS1200. This module is Plug-In installed into Motorola radio GM-series and connected to PC via Com Port and special cable.

If the intensity of negotiations and GPS-data is high it is possible to use two radios with dispatcher modules: one radio for transmitting speech, the other - for receiving GPS-data.

2. Mobile object (the subscriber)

• Any mobile or portable radio; • Subscriber's module S; • GPS-receiver (when necessary, only for Motorola GM-series)

GPS-receiver LGPS560 - integrated GPS receiver LGPS-560 with adapter for connect to the radio Motorola Professional GM via accessory connector.

18

3. Repeater with controller CBR-700R (unessential component)

D - Dispatcher devices of DS system

D - Dispatcher devices are the main elements of the computerized dispatcher workplace (CAD) of the DS system on implementation of control and management features of the subscriber radios operation (with S modules).

D - Dispatcher devices are as follows:

• Dispatcher modules MGMxxxD installed to Motorola GM-series radios,

• Dispatcher controller CBR-DM - external device connected to different radios.

19

Dispatcher devices -D

Devices -D Functions Radios

MGM700D • digital encryption • control and management functions Motorola GM-series

CBR-DM • control and management functions Mobile radios from differentmanufacturers

Dispatcher workplace (with MGM-D module):

• Personal computer with DSS dispatcher program • Motorola GM radio with MGMxxxD dispatcher's module • Special cable-adapter between PC and GM

Programming of dispatcher modules LEXIMCO is provided using:

• programming software Config_User • standard programming set Motorola (RIB RLN4008 plus cable-

programmer) for LEXIMCO modules MP, MGP, MGM being part of the radio

20

Dispatcher workplace (with controller CBR-DM):

• Personal computer with dispatcher program DSS • Controller CBR-DM • any mobile radio • Standard cable Com DB9-DB9

Programming components of CBR-DM dispatcher's controller:

• Config_User programming software • COM port cable-adapter

21

S - Subscriber modules of DS system S - Subscriber modules are devices that support features of remote control and management of subscriber radio operation over the air (radio channel) from the system dispatcher (administrator) of DS system.

Features of control and management are as follows:

• verification of person transmitting in a particular time period - PTT-ID • carrying-out requests of the system dispatcher (administrator) • verification the operability of specific radio user - RadioCheck • individual - IndCall - and group - GrCall - calls • temporary restriction of operation for receive and/or transmit - Restrict • remote disable for stolen or lost radios - RadioKill • Setting the specific radio user for transmitting (listening mode) - Listen • GPS-data transmission • sending the Emergency call

22

Note. Sending GPS-data is possible when using external GPS-receiver. Connection of GPS-receiver with the radio and subscriber module is Plug-In or soldering depending on the features of the radio.

Features of control and management in subscriber S modules

Functions MP MGP MGM MCP MCM IDM VDM RDM TDM

PTT-ID + + + + + + + + +

Emergency + + + + + +/- - - -

RadioCheck + + + + + + - + +

RadioKill + + + + + + - + +

IndCall, GrCall + + + + + - - - -

Restrict + + + + + + - + +

Listen + + + + + + - + +

GPS-data - + + + + - - +

Display Decode + + + + + - - - -

+ function enable - function disable +/- function enable only if radio is modificated

Programming of -S modules is carried out using:

• programming software CONFIG for all LEXIMCO modules • standard programming set Motorola (RIB RLN4008 plus cable-

programmer) for modules MP, MGP, MGM, MCP, MCM being part of the radio

• programmer RDM9 - for ALL LEXIMCO modules out of the radio

23

_____________________________________________________________________

DS Management functions 1. Decode and display PTT-ID (or automatic number identification ANI) of

transmitting radio 2. Individual and group calls 3. Verification the operability of field radio (Check) 4. Sending SMS messages for Motorola radio with display 5. Remote disable for stolen or lost radios (Kill) 6. Setting the field radio for transmitting mode (Listen) 7. Remote temporary restriction for receive and/or transmit of the field radio 8. Decode and display Emergency-ID from field radio 9. Decode and display GPS-data 10. Automatic location of the field radio (automode) 11. Auto-Acknowledge 12. Decode and display signal "Power_On" from Motorola radio 13. Remote changing of access level of the repeater with controller CBR-600R

1. Decode and display PTT-ID of transmitting radio

24

Each field radio at on-the-air (pressing or release of a PTT key) sends own number, which is displays on the computer of the dispatcher and on others field radios with display.

2. Individual and group calls

Dispatcher can send to radio Individual or Group Call. On a radio sounds beep and blinks LED about call.

3. Verification of the operability of field radio (Check)

25

This feature allows the dispatcher to check out a given radio. If the radio responds, the radio is within communications range and its RF circuitry is functioning. The user won't be disturbed.

4. Sending SMS messages for Motorola radio with display

Dispatcher can send to radio with display short alphanumeric message (for example, telephone number or secret command)

5. Remote disable for stolen or lost radios (Kill)

26

In event of loss/stealing radio dispatcher can send to radio blocking signal. Radio, on decode, causes it to stop working: the buttons do not function and it will not transmit or receive audio. The LEXIMCO module can be restored only on the firm - manufacturer.

6. Setting the field radio for transmitting mode (Listen)

If necessary dispatcher can transmit to radio a signal of forced setting on transmission mode. Radio to particular time passes in a transmission mode. All staff on the given channel listens to talks near a radio.

7. Remote temporary restriction for receive and/or transmit of the field radio

27

If necessary dispatcher can send to radio an inhibit signal of operation on reception and/or transmission. After ending of prohibition period to radio the permission signal is sent by the dispatcher

8. Decode and display Emergency-ID from field radio

In the event of potentially life-threatening situations field radio can send Emergency Call (by pressing an emergency button). Emergency Calls ensure that the appropriate personnel are instantly notified about this event.

9. Decode and display GPS-data

28

At equipment of a radio by the GPS-receiver the dispatcher can send to a radio a request about its geographical coordinates. The radio dispatches the coordinates. On an electronic map of the dispatcher the location of a radio is mapped.

10. Automatic location of the field radio (automode)

29

If necessary dispatcher can send on a radio with the GPS-receiver a signal of inclusion of the mode of automatic sending of GPS-datas. The radio with particular periodicity sends the coordinates, which are received by dispatcher.

11. Auto-Acknowledge

When the field radio decodes one of control signals, it automatically sends back a signal Acknowledge. This provides response to the dispatcher radio, so that dispatcher knows that his call has been received.

12. Decode and display signal "Power_On" from Motorola radio

30

The radio at power-on can send an appropriate signal, which is received by the dispatcher.

13. Remote changing of access level of the repeater with controller CBR-600R

The dispatcher can send on the repeater with controller CBR-600R a signal of a particular level of access to the channel of the repeater (access by all, or access on PTT-ID)

_____________________________________________________________________

LEXIMCO Options

31

The modules LEXIMCO have various functions depending on the programmed options. The options for custom-made LEXIMCO modules are programmed only at our R&D and manufacturing sites and can not be changed by the customer.

Options of digital modules MP, MGP, MGM (only for conventional radios)

Option Description D60 D70 D600 D700

S Subscriber functions (Check, Kill, Listen, Restrict) o o o o

SOB Subscriber functions with OTAR-Basic o o o o

BT Bluetooth functions d d o d

Options of digital modules MCP, MCM




Options of digital modules IDM

Option Description IDM60 IDM70 IDM600 IDM700



Options of digital modules VDM

Option Description VDM

S Subscriber functions (Check, Kill, Listen, Restrict) d

SOB Subscriber functions with OTAR-Basic d

Options of digital modules RDM

Option Description RDM60 RDM70 RDM600 RDM700

S Subscriber functions o o o o

32

(Check, Kill, Listen, Restrict)


BT Bluetooth functions d d o d

Options of digital modules TDM

Option Description TDM60 TDM70 TDM600 TDM700

S Subscriber functions (Check, Kill, Listen, Restrict)

d d o o

SOB Subscriber functions with OTAR-Basic d d o o

Options of all digital modules with other encryption algorithms


DES Algorithm DES + + + +

AES Algorithm AES + + + +

o - available cost option; + - available free option; - - not available; d - in development

Example of making the order for the subscriber digital module of D600 series for Motorola radio GM: MGM 600/S. Example of making the order for the digital module of D600 series for Motorola radio GP with DES encryption algorithm: MGP 600/DES

MP, MGP, MGM modules for Motorola Professional radios

MP, MGP, MGM modules are designed to secure two-way radio systems and Plug-In installed into Motorola P040, GP308, CT150, P080, CT450, PRO3150, GP140, GP328, HT750, PRO5150, GP338, HT1250, PRO7150, GP340,

33

GP360, GM338, GM340, GM360, GM380, GM640, GM660, GM1280 radios.

The table of compatibility

Analogue module D400

Digital nodules D60 D70 D600

D700

Compatible radios

EMEA ASIA LA NA

MP400-040

MP60-040

MP70-040

MP600-040

MP700-040 P040 GP88S

GP308 PRO3150 CT150 CT250

MP400-080

MP60-080

MP70-080

MP600-080

MP700-080 P080 - PRO3150 CT450

MGP400-140

MP60-080

MP70-080

MP600-080

MGP700-140 GP140 GP328 PRO5150 HT750

MGP400-160

MGP60-160

MGP70-160

MGP600-160

MGP700-160 - GP338 PRO7150 HT1250

MGP400-340

MGP60-340

MGP70-340

MGP600-340

MGP700-340 GP340 GP329 - -

MGP400-380

MGP60-380

MGP70-380

MGP600-380

MGP700-380

GP360 GP380 GP339 - -

MGP400-640

MGP60-640

MGP70-640

MGP600-640

MGP700-640 GP640 PTX700 PRO5450 -

MGP400-680

MGP60-680

MGP70-680

MGP600-680

MGP700-680 GP680 PTX760 PRO7450 -

MGM400-1xx

MGM60-1xx

MGM70-1xx

MGM600-1xx

MGM700-1xx

GM140 GM160

GM328 GM338

PRO5100 PR07100

CDM750 CDM1250 CDM1550

MGM400-3xx

MGM60-3xx

MGM70-3xx

MGM600-3xx

MGM700-3xx

GM340 GM360 GM380

GM339 PRO7200 -

MGM400-6xx

MGM60-6xx

MGM70-6xx

MGM600-6xx

MGM700-6xx

GM640 GM660 GM1280

MCX720 MCX760 MCX780

- -

MP, MGP, MGM 400 are frequency inverters (low security level) of D400 series. Programming frequency inversion 2340 ... 3840 Hz. Compatible with all frequency inverters. MP, MGP, MGM 70 are digital modules (high security level) of D70 Light series. More than 1 million digital keys combinations. "White noise".

34

MP, MGP, MGM 700 are digital modules (maximum security level) of D700 series. More than 4 billion digital keys combinations. "White noise".

Versions of radios

For correct operation of any optional devices (including LEXIMCO modules) in Motorola Professional radios the latter are to have corresponding version of the firmware. Note that the radio firmware version is not the CPS software version.

For 5 Tone radios (EMEA GP/GM 340, 360, 380) the firmware version is to be R03.01.25 or higher. For MPT radios (EMEA GP/GM 640, 680, 1280) the firmware version is to be R02.01.00 or higher. For MDC radios (EMEA GP/GM 140,160 and others) the firmware version is to be R05.00.03 or higher. For ELP radios (EMEA P040, P080) the firmware version is to be R02.00.00 or higher.

We recommend using the latest firmware version for certain radios. If versions don't match, the radio should be upgraded to the latest firmware version.

MP400, MGP400, MGM400 characteristics

Scrambling process Frequency inversion

Voltage supply +3.3 VDC (for portable) or +5VDC (for mobile)

Current supply No more than 5 mA

Input resistance No less than 200 kOhm

Frequency band 300 - 3400 Hz

Output resistance No more than 75 Ohm

Number of keys 1

Inversion frequency 2340...3840 Hz

Dimensions 45 x 54 x 4 mm

Weight No more than 9 g

Operating temperatures -30ºC...+60ºC

Programming Programming software CONFIG, Set for programming Motorola radios (RIB RLN4008 +cable-programmer)

Interface 40-pin OBIS and PROIS interface

MP70, MGP70, MGM70 Light characteristics

35

Digitized Voice Coder Method mixed-excitation linear prediction

Gross bit rate in the channel 2.4 kbps

Encryption algorithm AES

Frequency band 400-2400 Hz

Number of digital keys combinations 1.048.576

Inversion frequency of analog keys 2340...3840 Hz

Number of user's keys (digital and analog) Up to 16

Operating voltage +3.3 VDC (for portable) +5VDC (for mobile)

Operating current No more than 40 mA

Operating current in standby mode No more than 30 mA

Programming

Programming software CONFIG Set for programming Motorola

radios (RIB RLN4008&programming

cable)



MP700, MGP700, MGM700 characteristics





Number of digital keys combinations 4.294.967.296


Number of user's keys (digital and analog) Up to 16

Operating voltage +3.3 VDC (for portable) +5VDC (for mobile)



Programming

Programming software CONFIG Set for programming Motorola

radios (RIB RLN4008&programming

36

cable)



Options of digital modules MP, MGP, MGM (only for conventional radios)



o o O o

SOB Subscriber functions with OTAR-Basic o o O o

Options of MP, MGP, MGM digital modules with other encryption algorithms




o - available cost option; + available free option - - not available; d - in development

Installation of MP, MGP, MGM digital modules

MP, MGP, MGM modules are specially designed for Plug-In installation to Motorola Professional radios.

For installation of MGP modules into EMEA GP140 and GP340, and MP into EMEA P040 the special 40-pin flex is required to connect the

module to the radio. This flex must be extra ordered from our company or Motorola (Part.# 8480475Z03). In radios with a keypad, this flex

comes with the radio.

For installation of MGM into all mobile radios the Option Board Installation Kit (Motorola Part.# RLN4823) is required to connect and

37

installation the module to the radio. This kit must be ordered from our company or Motorola.

The procedure of installation of the MP, MGP, and MGM to the radio is the following:

1. Check radio firmware (and upgrade radio if necessary) 2. Programming of the radio (refer to Radio Programming Manual) 3. Installation of the module (refer to Installation Manual) 4. Programming of the module (refer to General Description of

program CONFIG and Programming Manual MP, MGP, MGM)

Programming of modules MP, MGP, MGM is carried out being part of the radio (without disconnecting from radio) using:

• standard programming set Motorola (RIB RLN4008 plus programming cable or RIBless programming cable)

• programming software CONFIG.

The LEXIMCO module in MPT radios (EMEA GP640, GP680, GM640, GM660, GM1280) operates only in trunk mode (i.e. cipher and clear mode operation is possible in trunk mode of the radio, only clear mode is possible in conventional mode).

MCP, MCM modules for Motorola Commercial radios

MCP, MCM modules are designed to secure two-way radio systems and Plug-In installed into Motorola Commercial Series CP140, CP160, CP180, CM160, CM360, GP3688, GM3688, EP450, EM400, PR400, CM300, PM400 radios.

38

The table of compatibility

Analogue

module D400

Digital nodules D60 D70 D600 D700

Compatible radios

EMEA ASIA LA NA

MCP400- 140

MCP60- 140

MCP70- 140

MCP600-140

MCP700-140 CP140 GP3688 EP450 PR400

MCP400- 160

MCP60- 160

MCP70- 160

MCP600-160

MCP700-160

CP160,

CP180GP3688 EP450 PR400

MCM400-

160

MCM60-

160

MCM70-

160

MCM600-

160

MCM700-

160

CM160

GM3688

EM400

CM300,

PM400

MCM400-

360

MCM60-

360

MCM70-

360

MCM600-

360

MCM700-

360

CM360 - - -

MCP, MCM 400 are frequency inverters (low security level) of D400 series. Programming frequency inversion 2340 ... 3840 Hz. Compatible with all frequency

inverters. MCP, MCM 70 are digital modules (high security level) of D70 Light series. More

than 1 million digital keys combinations. "White noise".

MCP, MCM 700 are digital modules (maximum security level) of D700 series. More than 4 billion digital keys combinations. "White noise".

Versions of the radios

For correct operation of any optional devices (including LEXIMCO modules) in Motorola Commercial radios the latter are to have corresponding version of the firmware. Note that the radio firmware version is not the CPS

software version.

For Motorola Commercial radios the firmware version is to be R03.00.01 or higher.

39

We recommend using the latest firmware version for the certain radios. If the versions don't correspond the radio should be upgraded up to the latest

firmware version.

MCP400, MCM400 characteristics


Voltage supply +3.3 VDC

Current supply No more than 5 mA




Number of keys 1




Programming Programming software CONFIG

Set for programming Motorola radios (RIB RLN4008 + cable)

Interface 40-pin PROIS interface

MCP70, MCM70 Light characteristics







Number of user's keys (digital and analog) up to 16

Operating voltage +3.3 VDC







40

MCP700, MCM700 characteristics








Operating voltage +3.3 VDC







Options of MCP, MCM digital modules




Options of MCP, MCM digital modules with other encryption algorithms





Example of making the order for the subscriber digital module of D600 series for Motorola radio CM: MCM 600/S

41

Example of making the order for the digital module of D600 series for Motorola radio CP with DES encryption algorithm: MCP 600/DES

Installation of modules MCP, MCM

MCP, MCM modules are specially designed for Plug-In installation to Motorola Commercial radios. For installation MCP, MCM into Motorola Commercial radio the special extra equipment is required to connect the module to the radio.

Radios Extra equipment

CP140 flex 8486617Z01+ retainer 4286741Z01

CP160, CP180 -

CM160, CM360 flex 8486617Z01+ spacers (or set PMLN4623A)

flex Part# 8486617Z01 (for CM160, CM360)

spacers - 4 pcs (for CM160, CM360)

Flex and spacers are included in a set Motorola Part# PMLN4623A (for CM160, CM360).

Flex and retainer 4286741Z01are included in a set Motorola Part# RLN5646A (for CP140)

The procedure of installation to the radio of the MCP, MCM encryption devices is the following:

1. Check radio firmware (and upgrade radio if necessary) 2. Programming of the radio (refer to Radio Programming Manual) 3. Installation of the module (refer to Installation Manual) 4. Programming of the module (refer to General Description of program

CONFIG and Programming Manual MCP, MCM)

42

Programming of MCP, MCM modules is carried out being part of the radio (without disconnecting from radio) using:

• Motorola standard programming set (RIB RLN4008 & programming cable)

• CONFIG programming software.

IDM modules for ICOM radios

IDM modules are designed for security of two-way radio systems and Plug-In installed into Icom radios F-series with optional connector.

Analogue module D400

Digital module D60 D70 D600 D700

IDM400 IDM60 IDM70 IDM600 IDM700

IDM 400 are frequency inverters (low security level) of D400 series. Programming frequency inversion 2340 ... 3840 Hz. Compatible with all frequency inverters. IDM 70 are digital modules (high security level) of D70 Light series. More than 1 million digital keys combinations. "White noise". IDM 700 are digital modules (maximum security level) of D700 series. More than 4 billion digital keys combinations. "White noise".

Compatible ICOM radios

IC-F3G/GS, IC-F4GT/GS, IC-F14/S, IC-F15/S, IC-F24/S, IC-F25/S, IC-F16/F, IC-F26/F, IC-F30GT/GS, IC-F31GT/GS, IC-F40GT/GS, IC-F41GT/GS, IC-F40GT/GS MT Version, IC-F41GT/GS MT Version, IC-F30GT-L, IC-F30GS-L, IC-F31GT-L, IC-F31GS-L, IC-F43TR, IC-F33GT/GS, IC-F34GT/GS, IC-F43GT/GS, IC-F44GT/GS,

43

IC-F70T/S, IC-F80T/S, IC-F110, IC-F111, IC-F121, IC-F210, IC-F211, IC-F221, IC-F110S, IC-F111S, IC-F121S, IC-F210S, IC-F211S, IC-F221S, IC-F510, IC-F520, IC-F521, IC-F610, IC-F620, IC-621, IC-F620TR, IC-621TR, IC-F610 MT Version, IC-F620 MT Version, IC-FR3000, IC-FR3100, IC-FR4000, IC-FR4100, IC-F1710, IC-F1721/D, IC-F2710, IC-F2721/D, IC-F1810, IC-F1821/D, IC-F2810, IC-F2821/D

IDM400 characteristics


Operating voltage +5VDC



Frequency band 300...3400 Hz


Number of keys (inversion frequencies) 1





Programming Programming software CONFIG, programmer RDM9









Operating voltage +5 VDC





44


















Options of IDM digital modules


S Subscriber functions (Check, Kill, Listen, Restrict) d d o o


Options of IDM digital modules with other encryption algorithms



45



Example of making the order for the subscriber digital module of D600 series: IDM 600/S Example of making the order for the digital module of D600 series with DES encryption algorithm: IDM 600/DES

Programming of IDM is carried out of the radio (after disconnecting with radio) using:

• programmer RDM9 • programming software CONFIG.

Modules IDM are designed specially for Plug In installation into Icom radios IC-F3/4, F310/410 and others.

Installation scheme IDM into radio is:

• Programming the IDM (refer to General Description of program CONFIG and Programming Manual IDM)

• Installation of the module (refer to IDM Installation Manual) • Programming radio (refer IDM Installation Manual)

VDM Modules for Vertex Standard VX radios VDM modules are designed for security of two-way radio systems and Plug-In installed into portable and mobile radios Vertex Standard VX-210, VX-400, VX-600, VX-800, VX-900, VX-410, VX420, VX-3200, VX-4100, VX-4200 etc, with corresponding optional connector.

Analogue Digital module

46

module D400

D60 D70 D600 D700

VDM400 VDM60 VDM70 VDM600 VDM700

VDM 400 are frequency inverters (low security level) of D400 series. Programming frequency inversion 2340 ... 3840 Hz. Compatible with all frequency inverters. VDM 70 are digital modules (high security level) of D70 Light series. More than 1 million digital keys combinations. "White noise". VDM 700 are digital modules (maximum security level) of D700 series. More than 4 billion digital keys combinations. "White noise".

Compatible Vertex Standard radios

VX-210, VX-400, VX-600, VX-800, VX-900, VX-410, VX420, VX-3200, VX-4100, VX-4200

As the Vertex Standard radios differ, LEXIMCO devices are designed and programmed for the concrete radios.

VDM400 characteristics









Operating temperatures -30ºC ... +60ºC


VDM70 Light characteristics






Number of digital user's keys 1

47





Weight less 5 g



VDM700 characteristics






Number of digital user's keys 1





Weight less 5 g



Options of VDM digital modules

Option Description VDM

S Subscriber functions (Check, Kill, Listen, Restrict) -

SOB Subscriber functions with OTAR-Basic -

Options of VDM digital modules with other encryption algorithms

Option Description VDM60 VDM70 VDM600 VDM700



48

o - available cost option + - available free cost option; - - not available; d - in development

Example of making the order for the subscriber digital module of D600 series with DES encryption algorithm: VDM 600/DES

Programming of VDM is carried out of the radio (without connecting with radio) using:


Modules VDM are specially designed for Plug-In installation into portable and mobile Vertex Standard radios VX-series with optional connector (VXSTD P/N P0091209).

Installation scheme VDM into radio is:

1. Programming the VDM (refer to General Description of program CONFIG and Programming Manual VDM)

2. Installation of the module (refer to VDM Installation Manual)

Programming radio (refer VDM Installation Manual)

TDM Modules for Tait radios

TDM modules are designed for security of two-way radio systems and Plug-In installed into Tait radios - Orca 5000 Series Portables,T2000 and T8000 Mobiles radios, equipped with special flex.

49

Table of compatibility

Digital nodules D60 D70 D600 D700 Compatible radios

TDM60 TDM70 TDM600 TDM700

Tait Orca Portable (TOP) 5000 radios (5010, 5020, 5035, 5040) Tait T2000 Mobile radio Tait T8000 Mobile radio

TDM 70 are digital modules (high security level) of D70 Light series. More than 1 million digital keys combinations. "White noise".

TDM 700 are digital modules (maximum security level) of D700 series. More than 4 billion digital keys combinations. "White noise".

Radio Hardware Compatibility Tait Orca Portable Radios The TOP Encryption Upgrade Flex PCBs are suitable for use in most TOP 5000 radios (5010, 5020, 5035, 5040). The flexes can be retrofitted to most radio models, but this should first be verified by providing the serial numbers to a Tait Service Centre for confirmation .

T2000 Radios The T2000 Encryption Upgrade Flex PCBs are suitable for radios which contain the Enhanced HC11 Control PCB (IPN 220-01344-XX). This can be verified by providing the serial numbers to a Tait Service Centre for confirmation.

Radio Firmware and Software Compatibility Tait Orca Portable Radios Encrypted TOP radios require specific encryption-capable radio firmware. This is fitted during manufacture of encryptable radios, but will need to be programmed separately where an encryption upgrade kit is used. Contact the Tait Strategic Sales Team for confirmation of encryption firmware support.

T2000 Radios Encryption-capable T2000 radios require no firmware change to support encryption function.

50

Encryption Upgrade Kits

IPN Description Comments TOPA-EA-001

KIT ENCRYPT UPGRD FLEX 5000

Tait Orca encryption upgrade kit

T2000-EA-001

KIT T2K ENCRYPT UPGRD FLEX

T2000 encryption upgrade kit

New encryptable radio models (flex fitted)

TOP-XXXXX-B3, T20XX-XXX-XXXE

TDM70 Light characteristics















TDM700 characteristics







Number of user's keys up to 16

51

(digital and analog)








Options of digital modules TDM



d d o o


Options of digital modules TDM with other encryption algorithms




o - available cost option; + - available free cost option; - - not available; d - in development

Example of making the order for the subscriber digital module of D600 series: TDM 600/S Example of making the order for the digital module of D600 series with DES encryption algorithm: TDM 600/DES

Programming of TDM is carried out of the radio (without connecting with radio) using:


52

Modules TDM are designed specially for Plug In installation into Tait radios.

Installation scheme TDM into radio is:

• Programming the TDM (refer to General Description of program CONFIG and Programming Manual TDM)

• Installation of the module (refer to TDM Installation Manual) • Programming radio (refer TDM Installation Manual)

RDM modules for professional two-way radios of "closed architecture"

RDM400/60/600 modules are designed for security of two-way radio systems and installed into the most professional two-way radios using soldering.

Adjustment of signal levels and configuring of the parameters (mode control, condition when the radio is enabled, the key etc) are carried out using the software at company-manufacturer when placing the order. You can change the parameters of the device with the help of special programmer RDM9 and programming software CONFIG.

The modules RDM are made with vertical V or horizontal H connector. For installation RDM in radio is necessary a mounting set RDM14.

Table of compatibility

Analog module

Digital nodules D60 D70 D600 D700 Compatible radios

RDM400H,V RDM60H,V RDM60H,V RDM60H,V RDM600H,V

Motorola GM300, M208, Kenwood TK2107, TK270/370(G), TK760, Vertex VX2000, VX3000,Standard GX1608, Yeasu VX510 etc.

RDM 400 are frequency inverters (low security level) of D400 series. Programming frequency inversion 2340 ... 3840 Hz. Compatible with all frequency inverters.

53

RDM 70 are digital modules (high security level) of D70 Light series. More than 1 million digital keys combinations. "White noise". RDM 700 are digital modules (maximum security level) of D700 series. More than 4 billion digital keys combinations. "White noise".

RDM400 characteristics









Dimensions RDM 20 x 26 x 4 mm


Operating temperature -30ºC...60ºC


RDM70 Light characteristics












54


Weight Less 9 g

Programming Programming software

CONFIG, programmer RDM9

RDM700 characteristics













Weight Less 9 g

Programming Programming software

CONFIG, programmer RDM9

Options of RDM digital modules



d d o o


Options of RDM digital modules with other encryption algorithms

55




o - available cost option; + - available free cost option; - - not available; d - in development

Example of making the order for the subscriber digital module of D600 series with horizontal connector: RDM600H/S.

Example of making the order for the digital module of D600 series with DES encryption algorithm and vertical connector: RDM600V/DES.

Installation of RDM modules

Modules RDM are designed specially for installation to the radios of different manufacturers not possessing the special socket for optional devices using soldering.

When installing RDM you should refer to corresponding Installation Manual to the radio.

D400 series modules

Modules D400 series are frequency inverters and are designed to provide initial level protection of radio communication from eavesdroppers. This module is ideal for commercial, marine, law enforcement, public safety and government communication systems.

Features and advantages of D400 series modules

• Low price; • Plug-In installation into Motorola Professional/Commercial, ICOM, Vertex

Standard radios; • Solder installation into most other radios of "closed architecture"; • High quality of reconstructed speech; • Compatibility with any frequency invertors; • Programming inversion frequency via PC (from 2340 up to 3840 Hz)

D400 basic characteristics

Scrambling process

Frequency inversion

56

Current consumption

No more than 5 mA

Input resistance No more than 200 kOhm



Number of keys 1

Inversion frequency

2340...3840 Hz

Operating temperature -30ºC...+60ºC


The theory of analog scrambling

This method of scrambling is based on single constant frequency inversion of its spectrum during the transmission of voice message.

The spectrum of initial voice signal is transmitted over the air at 300-3000 Hz range. After heterodyne transformation the signal at the output of the transmitter has frequency spectrum consisting of two bands - to the left (not inverted) and to the right (inverted) of the inversion frequency.

In the transmitting device one band (not inverted) is suppressed by the filter and another band (inverted) is intensified and put on the air.

The receiving radio picks up the scrambled signal and inverts it once again. If both scramblers operate at the same frequency inversion (at one key), the de-scrambling process (speech reconstruction) will be 100% successful.

The scrambler uses Texas Instruments processor MSP430-series.

______________________________________________

D70 Light series modules "white noise"

D70 Light series modules are not compatible with digital modules of D700 series.

57


• Real digital module. • Speech transmission in the form of "white noise"; • No vocalization. No any speech symptoms (rhythm, tone, pause, etc)

• Digital communication channel in analog system of radio communication; • Digital audio quality

• no loss of quality; • background noise rejection;

• Work through conventional analog repeater (12.5/25 kHz); • Work in Simulcast, Voting, LTR systems, • Programmable automatic receive operation (Autodetect) • More than 1 million (220) combination of digital keys; • Compatibility with the any frequency invertors and analog modules D400 • Plug-In installation into Motorola Professional/Commercial, ICOM, Vertex

Standard , Tait radios; • Solder installation into most other radios of "closed architecture";

58

• Programming via PC; • Upgradeably.












Programming Programming software CONFIG,

programmer RDM9 or standard radio programming kit

D70 options (only for conventional radios)

Option Description MGM MCM

MGPMP

MCPIDM VDM TDM RDM

S Subscriber functions (Check, Kill, Listen, Restrict) d d d d d d

SOB Subscriber functions with OTAR-Basic d d d d d d

D70 options with other encryption algorithms

Option Description MGM MGPMP

MCPMCM IDM VDM TDM RDM

DES Algorithm DES + + + + + + +

AES Algorithm AES + + + + + + +

o - available cost option; + - available free option - - not available; d - in development

59

Example of making the order for the digital D70 series module for Motorola radio GM: MGM70 Example of making the order for the digital D70 series module for Motorola radio GP with DES encryption algorithm: MGP70/DES

D700 series modules "white noise"

D700 series modules are not compatible with digital modules of D70 series.


• Real digital module. • Speech transmission in the form of "white noise"; • No vocalization. No any speech symptoms (rhythm, tone, pause, etc)



60

• Work through conventional analog repeater (12.5/25 kHz); • Work in Simulcast, Voting, LTR systems, • Programmable automatic receive operation (Autodetect) • More than 4 billion (232) combination of digital keys; • Compatibility with the any frequency invertors and analog modules D400 • Plug-In installation into Motorola Professional/Commercial, ICOM, Vertex

Standard , Tait radios; • Solder installation into most other radios of "closed architecture"; • Programming via PC; • Upgradeably.
















MGPMP

MCPIDM VDM TDM RDM

61

S Subscriber functions (Check, Kill, Listen, Restrict) o o o d o o

SOB Subscriber functions with OTAR-Basic o o o d o o







Example of making the order for the subscriber digital module D700 series for Motorola radio GM: MGM 700/S Example of making the order for the digital module D700 series for Motorola radio GP with DES encryption algorithm: MGP 700/DES

D600 series modules "white noise"

Modules D600 series are digital speech modules and designed to provide high level protection of radio communication from eavesdropping. D600 module is a perfect cost effective solution for high-end voice encryption for commercial users, police departments, public safety organizations and other systems as a defence against unauthorized interception of private and sensitive voice transmissions by casual or even the most determined listeners. Modules D600 series are no compatible with other digital modules D700, D60, D70 series.


• First real digital module. • Speech transmission in the form of "white noise"; • No vocalization. No any speech symptoms (rhythm, tone, pause, etc)

62



• Work through conventional analog repeater (12.5/25 kHz); • Work in Simulcast, LTR systems, • Programmable automatic receive operation (Autodetect) • More than 4 billion (232) combination of digital keys; • Compatibility with the any frequency invertors and analog modules D400 • Plug-In installation into Motorola Professional/Commercial, ICOM, Vertex

Standard , Tait radios; • Solder installation into most other radios of "closed architecture"; • Programming via PC; • Upgradeably.









63








MGPMP

MCPIDM VDM TDM RDM

S Subscriber functions (Check, Kill, Listen, Restrict) o o o d o o

SOB Subscriber functions with OTAR-Basic o o o d o o







Example of making the order for the subscriber digital module D600 series for Motorola radio GM: MGM 600/S Example of making the order for the digital module D600 series for Motorola radio GP with DES encryption algorithm: MGP 600/DES

LEXIMCO presents BT modules and BT devices for professional two-way radios. These BT Kits consist from detachable parts; have different purpose and functionality, like internal and external connection, with/without encryption etc and supports wide range of BT headsets and GPS receivers. Application of BT sets and BT devices...

64

BT Kit includes:

1. Master Device (digital module or external dongle)

MGP-BT

or

MGP-BT/360

or

RDM-BT

or

DNGL

2. PTT-BT button

PTT-BT/K

or

PTT-BT/R

3. BT Headset

HS711 or

HS713 or

Jabra BT150

or RexPower FJ980

or another

4. Charging Adapter (for DNGL, PTT-BT/K and HS711, HS713)

5. Multi-charge jack (for Charging Adapter)

6. Belt holder or neck cord (for PTT-BT/K)

Digital BT module

Digital option BT board could be installed “plug and play” inside radio. Currently we produce MGP-BT (for GP140, GP340, GP360, GP380) and RDM-BT (for different radio with “closed architecture”). Digital option BT board also supports voice encryption protocol D60, D70, D600 or D700 and signaling protocol DS.

65

Digital option BT board could work with next BT devices: wireless PTT BT buttons, standard and modified BT headsets and standard BT GPS receivers.

As we don’t plan to make option boards for ICOM and Vertex radios due to lack of space, we suggest using with these radios external BT dongle.

External BT dongles

Dongles – special external devices which connect with a radio through accessory connector. Due to their small size they could be attached to radio or radio case by two side sticky tape. Currently we have dongles for next radios in stock

DNGL/GP Motorola GP140, GP340, GP360, GP380, GP640, GP680;

DNGL/CP Motorola CP-series (CP140, CP340, CP360, CP380) and P-series (P040, P080)

DNGL/MGP Motorola GP344, GP388, GP644, GP688

DNGL/IC1 ICOM IC-F3G, F3GS, F4G, F4GS, F33G, F33GS, F43G, F43GS, F11, F21,F22, F31

Dongle for other radios also could be ordered.

External BT dongles don’t support either encryption or signaling protocol DS. If user needs to use encryption or DS1200 signaling protocol (for example for GPS data transfer) radios should be additionally equipped with LEXIMCO standard digital option boards.

External BT dongles could work with next external BT devices: wireless BT PTT buttons and standard BT headsets.

External BT dongle works from internal rechargeable battery and could be recharged (AC/DC adapter included).

Wireless PTT-BT buttons

66

Wireless PTT-BT button allows setting radio to transmission mode remotely. The radios should be equipped with digital option BT boards or with external BT dongles. Wireless PTT-BT buttons have 2 types – PTT-BT/K and PTT-BT/R

PTT-BT/K has round shape, small size and could be placed either in hand or on neck (string is included). It works from internal rechargeable battery and could be recharged (AC/DC adapter included).

PTT-BT/R has rectangular shape, small size and could be placed in had or attached to elbow and works from AA battery.

BT headsets

Our BT devices you could use with both standard BT headsets which could be purchased anywhere

and special customized HS711, HS713. HS711 and HS713 were specially adapted to wireless radios – delays and special service tones have been removed.

HS711 HS713

All BT headsets, BT PTT buttons and BT dongles or BT option boards are inter-operable.

_____________________________________________________________________

67

Documents

3200, VX-4100, VX-4200 - Leximco Holdings MGM60 MGM70 MGM600 MGM700 Motorola GM140, CDM750, PRO3100, GM160, CDM1250, PRO5100,GM338, GM340, GM360, GM380, GM640, GM660, GM1280 IDM400