3/2 Directional Control Valves - Optima · PDF file3/2 Directional Control Valves ... ESSO Febis K 32 (as of July 1992) or comparable oils with ... ISO viscosity class 32-46 (DIN 51519)

3/2 Directional Control ValvesNominal sizes 6 and 12For single-acting cylindersSolenoid pilot operated soft seal spool valveNAMUR pattern flange mounting (size 6)Port sizes G 1/4 or G 1/2

Catalog Register P 10

Publication 7502221.06.04.97

DescriptionSolenoid valve for filtered, lubricated1) or oil-freecompressed air, instrument air, nitrogen and other neutralfluids.

Temperature min.: –25 °CTemperature max.: See specifications for

solenoids (Page 3)Operating pressure: 2.5 to 8 bar with internal control

pressure supply0 to 8 bar with external control pressure supply

Auxiliary power valve: Only with external controlpressure supplyPort 12: 2.5 to 8 bar

Solenoid: DC, AC or intrinsically safecircuits

Mounting position: OptionalMaterial:Valve body: Hard anodized aluminium/

stainless steelSeals: AU/NBR

FeatureslExhaust air feedbacklHigh flow ratelMaintenance-freelCrossover-free switching, switch-over function guaran-

teed even with small cross section air supply.lSafety function in the event of power failure provided

by mechanical return spring (version 1 with solenoid).lCan be fitted with manual override with or without lock.lSuitable for use in exposed locations with severe

environmental conditions.lMinimal electrical power consumption – therefore

many safety ratings possible, e.g. EEx ia IIC T6.lValve interior protected from contamination.lPilot valve protected from contamination by control

fluid.

1) Oil recommendation: Shell Hydrol DO 32, ESSO Febis K 32 (as of July 1992) or comparable oils with DVI values < 8 (DIN 53521) and ISO viscosity class 32-46 (DIN 51519).

Internal controlpressure supply

External controlpressure supply

IMI Norgren-Herion Fluidtronic GmbH & Co. KG, D-70731 FellbachStuttgarter Straße 120, D-70736 Fellbach ⋅ Tel.: +49 (0)7 11 / 52 09-0 ⋅ Fax: +49 (0)7 11 / 52 09-6 14

Valve parametersNom.size

Pipe connection Operatingpressure[bar]

Control pressuresupply[bar]

kV value(CV (US)≈kV x 1.2)

Weightwithoutsolenoids

Sectionaldrawing

Dimensionaldrawing

Cat. No.

1 3 2 3 min. max. internall external [kg] No. No. Valve Solenoid



6 6 61212

G 1/4G 1/41/4-18NPTG 1/2G 1/2

G 1/4G 1/41/4-18NPTG 1/2G 1/2

2.502.52.50

88888

–

–

–2.5 to 8––2.5 to 8

1.51.51.52.22.2

0.50.50.51.01.0

0202020202

0202020202

8020740.8020741.8020742.8020840.8020897.

Seesolenoidspeci-fications

Internal controlpressure supplyFlange surface (NAMUR)

External controlpressure supplyFlange surface (NAMUR)

6 6 6

G 1/4G 1/41/4-18NPT

FlangeFlangeFlange

2.502.5

888

–

–2.5 to 8–

1.51.51.5

0.60.60.6

010101

010101

8020744.1)

8020799.1)

8020748.1)


Cat. No. (example): Valve Solenoid 8020744. 2032

Add-on manual overrides

Without detent With detentCat. No. 0553886 Cat. No. 0553887

1) 2 mounting bolts M5 x 45 DIN 912 A2/A4 included in delivery.

2 7502221.06.04.97

For intrinsically safe circuits with safety ratings EEx ib IIC T6 and IP 65Illustration Nominal

resistance RV

Coil

Min. requiredswitchingcurrent

Resistance RW 65

Coil 4)

Requiredvoltageat terminalRW 65

Ambienttemperature

Fluid- temperaturemax.

Weight Dimen-sionaldrawing

Circuitdiagram

Cat. No.

[Ω] [mA] [Ω] [V] [°C] [°C] [kg] No. No.

124159198248306378467566692

524540363330272523

150193240301371458566686839

7.8 8.7 9.610.912.313.815.317.219.3

–40to +65

+65 0.8 03 10 20306)

20316)

20326)

20336)

20346)

20356)

20366)

20376)

20386)

When selecting an intrinsically safe power supply, the permissible maximum values according to the Certificate of Con-formity should be taken into account. On the other hand, the low effective inductivity and capacity can be ignored.

1) Required connector for DC: Cat. No. 0570275. Connector with rectifier for AC or universal current: Cat. No. 0663303. Connector with LED andtransparent housing: Cat. No. 0663035.

2) Certificate of Conformity KEMA No. Ex-93.C.8283 X3) Certificate of Conformity PTB No. Ex-92.C.2175 X4) RW 65 is the solenoid coil resistance at +65 °C ambient temperature and an applied voltage which produces an output of 2.8 W at +20 °C

ambient temperature (max. permissible output from intrinsically safe circuits for above solenoids).5) CSA Certification No. LR 57643-6, FM approved, for hazardous locations: Div. 1 and 2, class I, II, III6) Certificate of Conformity PTB No. Ex-95.D.2178

Solenoid parameters

Standard voltages 24 VDC, 230 VAC. Other voltages and designs available on request.Designed in accordance with Specifications VDE 0580/VDE 0171, EN 50014/EN 50028.100 % duty cycle.Illustration Power

consumptionRated current

Rated voltagetolerance

Protection class Ambienttemperature

Fluid-temperaturemax.

Weight Dimen-sionaldrawing

Circuitdiagram

Cat. No.

24VDC[W]

230VAC[VA]

24VDC[mA]

230VAC[mA]

[%]+

[%]– [°C] [°C] [kg] No. No.

1.6 – 67 – 10 15 IP 00, withconnectorIP 65

–25to +60

+80 0.14 06 01 02531)

1.9 – 78 – 10 15 IP 00, withconnectorIP 65

–25 to +60

+80 0.3 05 01 07631)

3.2 – 135 – 10 15 IP 65EEx m II T4Cable, 3 m long

–20 to +70

+70 0.4 04 04 02782)

– 3.5 – 15 10 15 04 07 02792)

0.7 – 29 – 10 20 IP 65EEx me II T5or T6

–20 to +80 (T5)–40 to +70 (T6)

0.8 03 04 39003)

3.9 – 161 – 10 15 IP 65EEx me II T5or T6

–20 to +80 (T5)–40 to +60 (T6)

0.8 03 04 39103)

– 4.9 – 21 10 15 IP 65EEx me II T5or T6

–20 to +80 (T5)–40 to +60 (T6)

0.8 03 07 39113)

1.4 – 59 – 10 15 NEMA4,4X,6,6P,7,9Strandedwire,460 mm long

–20 to +60 0.5 07 01 37205)

7502221.06.04.97 3

Sectional drawings

01

1 Body assly. 2 Seal retainer 3 Stud 4 Tube 6 Flange 7 Solenoid 8 Spring11 Solenoid attachment12 Retaining ring14 Lip ring15 Spool16 Piston17 Screw plug

(internal pressuresupply)

21 Pilot control valve21.1 Screw plug assly.

Cat. No. 055449024 O-ring30 Screw31 Screw

1 Body assly. 2 Seal retainer 3 Stud 4 Tube 6 Flange 7 Solenoid 8 Spring11 Solenoid attachment12 Retaining ring14 Lip ring15 Spool16 Piston17 Screw plug

(internal pressuresupply)

21 Pilot control valve21.1 Screw plug assly.

Cat. No. 055449022 O-ring24 O-ring30 Screw31 Screw33 Screw34 Coding stud

02

4 7502221.06.04.97

Dimensional drawings [mm]

01

02

Dimensional table [mm]

Cat. No. A1 A2 B1 B2 B3 B4 C1 C2 C3 C4 H L T1

8020740. G 1/4 G 1/8 40 51 40 6.6 63 24 24 108.5 200 55 308020741. G 1/4 G 1/8 40 51 40 6.6 63 24 24 108.5 200 55 308020742. 1/4-18 NPT 1/8-27 NPT 40 51 40 6.6 63 24 24 108.5 200 55 308020840. G 1/2 G 1/8 50 38.7 50 7 55 33 33 118.5 219 70 408020897. G 1/2 G 1/8 50 38.7 50 7 55 33 33 118.5 219 70 40

Dimensional table [mm]

Cat. No. A1 A2

8020744. G 1/4 G 1/88020799. G 1/4 G 1/88020748. 1/4-18 NPT 1/8-27 NPT

7502221.06.04.97 5

04

05 06

Dia.13Approx. 89

07

Dimensional drawings [mm]

03

6 7502221.06.04.97

NAMUR hole pattern

Fitting accessories

Description Use For additionalinformationsee Publication

Weight

[kg]

Cat. No.

Flange plate Direct attachment to pneumatic lifting drives with NAMURridge; in the case of wall mounting, dependent on position ofpiping

HERION7502242

0.49 0559857

Clamp Used in conjunction with flange plate for attachment to pneumatic lifting drives with NAMUR post

0.10 0540593

Spacer plate Direct attachment to pneumatic swivel drives,e. g. when using solenoid with terminal box:Cat. Nos. 3769/2030 - 2038,dependent on mounting position

0.25 0540109

Adaptor plate Direct attachment to pneumatic swivel drives with holepattern corresponding to older type valves: Cat. No. 8020781

0.18 0603216

Silencer Pressure connection G 1/4. Max. back pressure 6 bar HERION7501080

0.01 0014600

Exhaust throttle Without silencer Port size G 1/4Operating pressure 0 to 10 bar G 1/2

HERION7501069

0.060.20

40481044048204

Electrical circuit diagrams

01 07

04 10

7502221.06.04.97 7

Subject to alteration 7502221.06.04.97

2 2221/.07.96

Valve parametersNom.size

Pipe connection Operatingpressure[bar]

Control pressuresupply[bar]

kV value(CV (US)≈kV x 1.2)

Weightwithoutsolenoids

Sectionaldrawing

Dimensionaldrawing

Cat. No.

1 3 2 3 min. max. internal external [kg] No. No. Valve Solenoid



6 6 6121212121212

G 1/4G 1/41/4-18NPTG 1/2G 1/21/2-14NPT1/2-14NPT1/2-14NPT1/2-14NPT

G 1/4G 1/41/4-18NPTG 1/2G 1/21/2-14NPT1/2-14NPT1/2-14NPT1/2-14NPT

2.502.52.502.52.500

888888888

–

–

––

–2.5 to 8––2.5 to 8––2.5 to 82.5 to 8

1.51.51.52.22.22.22.22.22.2

0.50.50.51.01.01.01.01.01.0

020202020202020202

020202020202020202

8020740.8020741.8020742.8020840.8020897.80208498020880.1)

8020898.1)

8020899.


Internal controlpressure supplyFlange surface (NAMUR)

External controlpressure supplyFlange surface (NAMUR)

6 6 6

G 1/4G 1/41/4-18NPT

FlangeFlangeFlange

2.502.5

888

–

–2.5 to 8–

1.51.51.5

0.60.60.6

010101

010101

8020744.2)

8020799.2)

8020748.2)


Cat. No. (example): Valve Solenoid 8020744. 2012

Add-on manual overrides

Without detent With detentCat. No. 0553886 Cat. No. 0553887

1) Non-ferrous / Valve body: St. Steel 1.43052) 2 mounting bolts M5 x 45 DIN 912 A2/A4 included in delivery.

Documents

3/2 Directional Control Valves - Optima · PDF file3/2 Directional Control Valves ... ESSO Febis K 32 (as of July 1992) or comparable oils with ... ISO viscosity class 32-46 (DIN 51519)