Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
REGULATOR & PILOT : 3010P SERIESPILOT-OPERATED PRESSURE REGULATING VALVE
3010P SERIES REGULATING VALVE WITH “P” PRESSURE PILOT
I Since
198
6
Manufacturers Of Steam Fired Specialty Equipment
ncorporatedEngineeringr
P.O. Box 473639, Charlotte, NC 28247 | Phone 704.940.1228 | Fax 704.940.1227 | www.therma�oengineering.com
• Max Inlet Pressure: 300 PSIG at 450˚F• Reduced Outlet Pressure Range: 3-200 PSIG• Min Inlet Pressures:
15 PSIG standard main valve• Ductile Iron or Cast Steel Construction Available
TYPICAL APPLICATIONS
FEATURES• The “MP” Pilot can maintain downstream pressure
to ±1 PSIG
• Choices of three overlapping pressure ranges• Main valve head and seat can be fully removed while
valve is inline for inspection and cleaning withoutspecial tools Fully guided stem assembly
• Pilot is easily installed using only four bolts• Packless single seated design for dead tight shutoff
OPTIONS•
•
Pressure and temperature pilots can becombined on the same regulator
Solenoid pilot can be added for electrical on/off control of the regulator
• Can be used with solenoid and temperaturepilots
• Can be used with electronic modulating pilot• Carbon Steel Construction to 300 psig
PRESSURE-ADJUSTING SPRING RANGES “P”sroloC gniyfitnedIsegnaR erusserP
3-25 PSIG yellow20-100 PSIG blue80-200 PSIG red
PRESSURE-ADJUSTING SPRING RANGES “P5”1-10 PSIG yellow
10-25 PSIG blue
MATERIALSBody Ductile IronCover Ductile IronGasket GrafoilCover Screws SteelPilot Adapter Ductile IronScreen Stainless SteelTubing CopperValve Seat Hardened SST (55 Rc)Valve Disc Hardened SST (55 Rc)Diaphragm Phosphor Bronze
NOTE: Carbon steel valve available.
MINIMUM OPERATING PRESSURESMinimum Inlet Pressure:
15 PSIG
Minimum Differential Pressure:10 PSI
The 3010 Series Regulator with the “MP” Pressure Pilot is used for reducing steam pressure in piping mains and process applications. Pilot-operated regulators will maintain constant downstream pressure even when the inlet pressure to the regulator fluctuates or steam usage varies.
Unique Design Allows the Head and Seat to be FullyRemoved for Service from the Top While the Valve isInline without Removing the Lower Hood
I Since
198
6
Manufacturers Of Steam Fired Specialty Equipment
ncorporatedEngineeringr
P.O. Box 473639, Charlotte, NC 28247 | Phone 704.940.1228 | Fax 704.940.1227 | www.therma�oengineering.com
HOW TO ORDERMP PRESSURE PILOTSpecify: • Reduced pressure range
NOTE: When ordering spare parts please specify valve size, connection and material (Ductile Iron or Steel).
REGULATOR BODYSpecify: • 3010P Series regulator body
• Regulator size or capacity and pressuresof steam required
• End connections(threaded, 150/300# �anged)
DIMENSIONS 3010Ser ies – inches / pounds)sbl( thgieWecaF-oT-ecaF
Size NPT1/2” 5.5
5.55.97.27.28.5
51/23/4” 51/21” 6
11/4” 7.211/2”
11.211.314.515.3
11.211.314.5
272735393963
19.419.419.620.520.522.828.728.731.8
7.22” 8.5
921/2” 1503” 87/8 1824”6"
107/8 252420
REGULATOR & PILOT : 3010P SERIESPILOT-OPERATED PRESSURE REGULATING VALVE
NPT FLGB125# 250# 300#150# C