FLUID TRANSFER FITTINGS 24/10/2012 3000 Series - Swivel Joints Application - The industry standard for more than 70 years, Treloar-OPW Engineered Systems 3000 Series swivel joints are available in a variety of materials, sizes and styles to meet virtually any application. They make it possible to use rigid metal piping for loading and unloading caustic or hazardous liquids, petroleum, and other material, under pressure or vacuum, without the difficulty of manhandling heavy, cumbersome hoses. 100% Penetration Welding - Particular importance is the 100% penetration welding of fabricated steel and stainless steel swivels. A Variety of Metals Available - Treloar-OPW cast swivel joints are available in steel, aluminium, bronze, stainless steel and ductile iron. Fabricated swivel joints available in steel and stainless steel are made in Australia. Standard Sizes: 3/4 in. to 12 in. Standard Materials: Aluminum, Bronze, Carbon Steel, Ductile Iron, Stainless Steel Standard Seals: Buna-N, Fluorocarbon, PTFE, EPDM, Neoprene End Connections: FNPT, 150/300 ANSI Flanges, Butt/ Socket Weld Features Specifications Page 1 of 2 1 2 3 4 5 6 1 Tight O-Ring Seals - O-rings are used to provide a tight seal without hindering swivel action. Accurately machined and micro finished grooves provide minimal seal wear. Available seals include: Nitrile, Viton, Neoprene, E.P.D.M., Teflon® Garter Seal and even Kalrez® as needed. True Ball Bearing Race Alignment - Body and tail sections are locked together by a double row of ball bearings. Raceways are machined to precise tolerances. This double race design assures true alignment, and prevents binding caused by temperature changes or heavy radial loads. Carbon steel swivels have hardened races to maximize load-carrying capability Protected Bearing Chamber - Protective inner O-ring seal prevents product from entering bearing chamber. Outer seal keeps rain, dirt, and other contaminants out. Both seals hold in lubrication Long-Life Bearings - Ball bearings are hardened, precision ground steel. All Treloar-OPW swivels are available with stainless steel bearings on special order. Easy Lubrication - All Treloar-OPW swivels are pre- lubricated at the factory. All 3/4”, 1” and submerged service swivels are permanently lubricated. For swivels requiring field lubrication, a grease fitting between the races accepts a standard grease gun. EP2 grease used. No Field Adjustment Necessary - Balls are held in place by factory installed plugs that never need adjustment to maintain good ball bearing performance. 1 2 3 4 5 6

3000 series - Swivel Joints - Petrochemical Products for · PDF file · 2016-05-24... Treloar- oPW Engineered Systems 3000 Series swivel joints are available in a variety of materials,

Download PDF Report

Upload
hadiep
View
235
Download
3

Embed Size (px)

Citation preview

Page 1: 3000 series - Swivel Joints - Petrochemical Products for · PDF file · 2016-05-24... Treloar- oPW Engineered Systems 3000 Series swivel joints are available in a variety of materials,

Head Office 25-33 Gardiner Street, Rutherford NSW 2320 Australiacritical fluid solutions & services

www.treloar.com.auphone +61 2 4932 7055 fax +61 2 4934 2013

24/10/2012 Fluid TransFer FiTTings Fluid TransFer FiTTings24/10/2012

3000 series - Swivel Joints

Application - The industry standard for more than 70 years, Treloar-oPW Engineered Systems 3000 Series swivel joints are available in a variety of materials, sizes and styles to meet virtually any application. They make it possible to use rigid metal piping for loading and unloading caustic or hazardous liquids, petroleum, and other material, under pressure or vacuum, without the difficulty of manhandling heavy, cumbersome hoses.

100% Penetration Welding - Particular importance is the 100% penetration welding of fabricated steel and stainless steel swivels.

A Variety of Metals Available - Treloar-OPW cast swivel joints are available in steel, aluminium, bronze, stainless steel and ductile iron. Fabricated swivel joints available in steel and stainless steel are made in Australia.

►

Standard Sizes: 3/4 in. to 12 in. Standard Materials: Aluminum, Bronze, Carbon Steel, Ductile Iron, Stainless Steel Standard Seals: Buna-N, Fluorocarbon, PTFE, EPDM, Neoprene End Connections: FNPT, 150/300 ANSI Flanges, Butt/Socket Weld

Features

Specifications

Page 1 of 2

Tight O-Ring Seals - O-rings are used to provide a tight seal without hindering swivel action. Accurately machined and micro finished grooves provide minimal seal wear. Available seals include: Nitrile, Viton, Neoprene, E.P.D.M., Teflon® Garter Seal and even Kalrez® as needed.

True Ball Bearing Race Alignment - Body and tail sections are locked together by a double row of ball bearings. Raceways are machined to precise tolerances. This double race design assures true alignment, and prevents binding caused by temperature changes or heavy radial loads. Carbon steel swivels have hardened races to maximize load-carrying capability

Protected Bearing Chamber - Protective inner O-ring seal prevents product from entering bearing chamber. Outer seal keeps rain, dirt, and other contaminants out. Both seals hold in lubrication

Long-Life Bearings - Ball bearings are hardened, precision ground steel. All Treloar-OPW swivels are available with stainless steel bearings on special order.

Easy Lubrication - All Treloar-OPW swivels are pre-lubricated at the factory. All 3/4”, 1” and submerged service swivels are permanently lubricated. For swivels requiring field lubrication, a grease fitting between the races accepts a standard grease gun. EP2 grease used.

No Field Adjustment Necessary - Balls are held in place by factory installed plugs that never need adjustment to maintain good ball bearing performance.

►