3-PIVOT & SPRINKLER SYSTEMS (1).pdf

8/9/2019 3-PIVOT & SPRINKLER SYSTEMS (1).pdf

1/22

Y O U R W A Y

PIVOT &

SPRINKLER

SYSTEMS

adritec.com

3


2/22

Pivot & Sprinkler Systems

Adritec is associated with major international companies that offer a wide range of Center Pivot and

Linear Move machines. These systems are used for different applications namely for open eld crops,

maize, potatoes in addition to many other eld crops. These machines cover areas up to 50 hectares per

machine. The design and specication of each machine is adapted to the requirements of the land, crop

type, and soil charachteristics. Adritec offers all the necessary technical designs and support services forsuch systems having installed many projects all over the world for the past 30 years.

Furthermore, since Adritec joined Premier Irrigation in India, a company that has pioneered sprinkler

irrigation in the Indian market over the last 45 years, it has added a comprehensive range of high quality

sprinkler products and a wealth of knowledge in the business. The variety of connection systems offered

by Premier Irrigation Adritec is not matched anywhere in the world.

The Right Sprinkler Equipment for your Land


3/22

PIVOT & SPRINKLERSYSTEMS

a.Pivot & Linear Move Machine3a1- Center Pivot Machine

3a2- Linear Move Irrigation Machine

b.Sprinklers Systems3b1- Micro Sprinklers3b2- Brass Impact Sprinklers

3b3- Plastic Impact Sprinklers

3b4- Rain Guns

3b5- HDPE Sprinkler System Pipes

3b6- Aluminum Sprinkler System Pipes

3b7- Hdpe Fusion Welded Pipes

3


4/22


Pivot & Linear

Move Machine

3 3a1- Center Pivot Machine3a2- Linear Move Irrigation Machine


5/22

Pivot & Sprinkler SystemsPivot & Linear Move Machine

81

Center pivot irrigation systems are composed of self-propelled structures equipped with irrigators and control units used to irrigate largeareas with low capital investment costs. It is composed of several pipes connected to the water source and is located around 4 meters

above the ground level. Sprinklers are suspended on towers with different spacing ranging from 30 - 60 meters. A pivot system moves in

circles and is supported by two wheel bases which are controlled by synchronized eletrical motors. It is a long service life system with lowmaintenance cost. Pivots offered by Adritec are lighter in weight, more efcient, and are long service life machines.

The pivot point is engineered to withstand the stress and force exerted on it by the pivot system under all eld conditions. The clean opendesign allows easy access to the controls while it provides a safer setting and simple access to other components requiring minimal

maintenance. It can be easily retro-tted to any substantial competitive pivot pad when the need to upgrade existing equipment is

required.

A single-leg tower is a roll formed, 9 gauge (7 gauge optional), C-channel, measuring 8" x 3" x 1.25" with 60,000 psi yield strength. These

legs are attached to the trussing with a 3" stiffener made of galvanized tubing. These high-strength materials require no additional brac-

ing at the tower and provide a narrow prole which reduces the contact with taller crops as well as reduces the interference of thesprinkler stream.

End Booms are available in several lengths (3', 13', 23', 32', 42', 51', 61', 85' and 105'). Truss rods and inverted truss supports provide theprimary support for strength and stability. The 6" sand trap and control box, for the optional booster pump, are located near the tower

for ease of servicing. The booster pump itself is located at the end gun for maximum efciency.

We offer ve types of water pipes and several different diameters to suit vary ing water requirements.

1. Pivot Legs 2. Pivot Platform Steps 3. Pivot Bearing 4. Pivot Flex Joint 5. Pivot Riser 6. Collector Reel

3a1 CENTER PIVOTMACHINE

Pivot Point Features

Towers

End Booms

Spans

Span Stainless Steel Aluminum Galvanized Steel Chromium Nickel Poly Lined

Length 8 5/8" 6 5/8" 6" 8" A 6" 10" 8 5/8" 6 5/8" 6" 4.5" 6 5/8" 6" 6 5/8"

( Ft / m ) 21.91

cm

16.83

cm

15.24c

cm

20.32

cm

15.24

cm

25.4

cm

21.91

cm

16.83

cm

15.24

cm

11.42

cm

16.83

cm

15.24

cm

16.83

cm

118 / 35.97

120 / 36.58

137 / 41.76

140 / 42.68

156.47.55

160 / 48.77

175 / 53.34

180 / 54.87

186.7/56.91

194 / 59.14

204 / 62.18 213 / 64.93


6/22

Pivot & Sprinkler SystemsPivot & Linear Move Machine

82

3a2LINEAR MOVEIRRIGATIONMACHINE

The lateral ( Linear ) move systems allow farmers to irrigate up to 98 percent of a square or a rectangular eld, as well as "L-shaped" elds.With a choice of water supply and guidance systems, each linear move system can be customized to individual needs. These systems

are designed to irrigate elds from 3 to 13 hectares.

Water Supply Options

Three main methods are used to supply the lateral move system with irrigation water:-

Power Supply Options

Two power supply options are availble:-1- Diesel generator set2- Electrical supply using cables

Hose-Fed Sytems

Depending on ow requirements, water is supplied from a pressurized mainline through either 4" , 6" or 8" hoses.

The length of the hose depends on the irrigation water volume and eld conditions. There are several optionalpivoting end towers that allow the hose-fed laterals to pivot 90 degrees without water in order to irrigate an

L-shaped eld, or pivot 180 degrees to irrigate an adjacent eld.

A towable option allows farmers to quickly move the equipment to nearby elds. This versatility can help signi-

cantly reduce per hectare equipment costs.

Growers also may choose from a two or a four-wheel end tower cart. The two-wheel system is designed for elds up to 397 meters wide,

and can pull up to 122 meters of 6 inch hard hose. The four-wheel system can irrigate elds up to 792 meters wide and pull up to 220

meters of 6 inch hard hose or 122 meters of 8 inch hard hose.

Ditch-Fed Systems

These lateral machines are easily adapted to existing ood irrigation sites and can be used on elds from 32

to 162 Ha in size. Existing ditches are often used when water is supplied from the edge of the eld. However,

a variety of ditch types are used including level concrete and plastic-lined and sloped concrete. Dependingon the ditch type, water is drawn into the system through a choice of self-cleaning oating or rolling inlets. The

power needed to pump water and generate electricity is supplied by an on-board diesel engine generator set

or via an electric cable connected to the power outlet boxes along the line of travel of the machine.

Enclosed Pipeline Systems

These automated water delivery systems provide a solution for farms with difcult topographies or shape where

rolling terrain makes ditch-fed systems impractical. The enclosed pipeline lateral supplies water through a mi-

cro-processor controlled tractor unit which automatically couples and uncouples to risers located every 18meters along a buried mainline. This system eliminates ditch construction and maintenance costs and permits

using the least-cost energy source for pumping.

Guidance Systems

Three proven methods provide accurate guidance for lateral move systems: above-ground steel cable, furrow or radio controlled using

a burried cable.


7/22

ADRITEC IS

SENSITIVE!We are sensitive to the market. Almost three decades of experienceas a global company, with markets in all ve continents across the

globe, has kept us attuned and sensitive to the markets needs,

and the specic requirements of any farm. We offer the best cost-

efcient solutions for the farmer, to obtain the highest productivity.

By the same token, we are sensitive to our environment. We offer

solutions; we offer a way of living. Adritecs products and services

are comprehensive, customized, and respectful of the environment

which we inhabit. Our sensitivity is manifested through our

relationship with farmers and their land, as well as an obligation tothe water resources available.


8/22


Sprinkler Systems

33b1- Micro Sprinklers

3b2- Brass Impact Sprinklers

3b3- Plastic Impact Sprinklers

3b4- Rain Guns

3b5- HDPE Sprinkler System Pipes

3b6- Aluminium Sprinkler System Pipes

3b7- HDPE Fusion Welded Pipes


9/22

Pivot & Sprinkler SystemsSprinkler Systems

85

Micro sprinklers are ideal for such applications as horticulture, orchards, green houses, nurseries and landscape projects. They are madeof high quality durable plastic. It gives uniform water distribution of irrigation water with different droplet sizes, ow rates, diameters and

patterns. Micro sprinklers are supplied with a complete kit consisting of a spike, a PVC micro pipe, a wide range of nozzles and adaptors.

The wide range of micro sprinklers gives exibility to provide the correct solution for all types of applications. Nozzels are color coded forease of identication of the different ow rates. Available as rotating, stable, stable-angled and mist patterns.

3b1 MICROSPRINKLERS

Delta Sprayer Code Colour Flow Rate Wetted Dia.

Nozzle l/h m

The most cost effective solu-tion for low application rate

and larger wetted area. Ideal

for eld crops, vegetables,owers, nurseries, and frost

protection. Spacing for over-

lapping irrigation up to 7 x 7Mt. with an optimal operating

pressure of 2 - 2.5 Atm.

3 B 1 M S D S 0 0 1 2 0 Red 120 10.0

3 B 1 M S D S 0 0 1 4 0 Pink 140 10.0

3 B 1 M S D S 0 0 1 6 0 Brown 160 10.5

3 B 1 M S D S 0 0 2 0 0 Yellow 200 11.0

3 B 1 M S D S 0 0 2 5 0 White 250 11.0

3 B 1 M S D S 0 0 3 0 0 Olive 300 11.5

Special Rotating Sprayer 3 B 1 M S S R S 0 0 7 0 Black 70 5.5

Used to irrigate trees with

medium to small root zone inorchards, citrus groves, nurs-

eries and green houses. Shutsoff after operation preventing

clogging by dirt or insects.Recommended for low owrate application and low

pressure networks. Optimal

operating pressure1 -1.5 Atm.

3 B 1 M S S R S 0 0 9 0 Green 90 6

3 B 1 M S S R S 0 1 0 5 Blue 105 6.5

3 B 1 M S S R S 0 1 2 0 Red 120 6.5

3 B 1 M S S R S 0 1 4 0 Pink 140 73 B 1 M S S R S 0 1 6 0 Brown 160 7

3 B 1 M S S R S 0 2 0 0 Yellow 200 7.5

3 B 1 M S S R S 0 2 5 0 White 250 8

3 B 1 M S S R S 0 3 0 0 Olive 300 8

Rotating Sprayer 3 B 1 M S R S 0 0 0 4 0 Orange 40 5

Used for under-tree irrigation

in large root zones, ideal for

orchards, citrus groves,nurseries and green houses.

Shuts off after operation

preventing clogging by dirtor insects. Optimal operating

pressure 1 - 1.5 Atm.

3 B 1 M S R S 0 0 0 7 0 Black 70 7

3 B 1 M S R S 0 0 0 9 0 Green 90 7.5

3 B 1 M S R S 0 0 1 0 5 Blue 105 8

3 B 1 M S R S 0 0 1 2 0 Red 120 8

3 B 1 M S R S 0 0 1 4 0 Pink 140 8.5

3 B 1 M S R S 0 0 1 6 0 Brown 160 8.5

3 B 1 M S R S 0 0 2 0 0 Yellow 200 9

3 B 1 M S R S 0 0 2 5 0 White 250 9

3 B 1 M S R S 0 0 3 0 0 Olive 300 9.5

Mist Sprayer 3 B 1 M S M S 0 0 0 4 0 Orange 40 -

Provides mist in very small

droplets when pressure israised resulting in excellent

water distribution. Used for

greenhouses, germination,seeding and rooting and

reduction of temperatures.

Optimal operating pressure2 - 3.5 Atm.

3 B 1 M S M S 0 0 0 7 0 Black 70 -

3 B 1 M S M S 0 0 0 9 0 Green 90 -

3 B 1 M S M S 0 0 1 0 5 Blue 105 -

3 B 1 M S M S 0 0 1 2 0 Red 120 -


10/22


86

Mini Sprayer 360 Deg. 3 B 1 M S M I S 6 0 4 0 Orange 40 2.5

Used for irrigation ingreenhouses, seeding, small

gardens, owers and rooting

systems. Mini sprayers irrigatesmall areas of 1 - 1.8 m.

Optimal operating pressure2 - 3.5 Atm.

3 B 1 M S M I S 6 0 7 0 Black 70 2.5

3 B 1 M S M I S 6 0 9 0 Green 90 2.5

3 B 1 M S M I S 6 1 0 5 Blue 105 2.5

3 B 1 M S M I S 6 1 2 0 Red 120 2.5

3 B 1 M S M I S 6 1 4 0 Pink 140 2.5

3 B 1 M S M I S 6 1 6 0 Brown 160 2.5

Mushroom Sprayer Code Colour Flow Rate Wetted Dia.

Nozzle l/h m

Stable sprayer with small

irrigated surfaces and large

drops. Cost effective solutionwhen used for low wetted

area and large applicationrates. Shuts off at end of op-

eration preventing clogging

by dirt or insects. Optimal op-erating pressure 2 - 3.5 Atm.

3 B 1 M S M U S S 0 4 0 Orange 40 3

3 B 1 M S M U S S 0 7 0 Black 70 3.53 B 1 M S M U S S 0 9 0 Green 90 3.5

3 B 1 M S M U S S 1 0 5 Blue 105 4

3 B 1 M S M U S S 1 2 0 Red 120 4

Mini Sprayer 180 Deg. 3 B 1 M S M I S 8 0 4 0 Orange 40 2.5

Used for irrigation ingreenhouses, seeding, small

gardens, owers and rooting

systems. Mini sprayers irrigatesmall areas of 1 - 1.8 m.

Optimal operating pressure

2 - 3.5 Atm.

3 B 1 M S M I S 8 0 7 0 Black 70 2.5

3 B 1 M S M I S 8 0 9 0 Green 90 2.5

3 B 1 M S M I S 8 1 0 5 Blue 105 2.5

3 B 1 M S M I S 8 1 2 0 Red 120 2.5

3 B 1 M S M I S 8 1 4 0 Pink 140 2.5

3 B 1 M S M I S 8 1 6 0 Brown 160 2.5

Silicon Sprinkler Code Colour FlowRate

WettedDia.

Nozzle l/h m

Used for orchard and eldapplications in addition tofrost protection and over-

head cooling for tree crops.Large Raduis, low ow rates.

Connection with 1/2" male

threaded. Optimal operatingpressure 1.5 - 3.5 Atm.

3 B 1 M S S S P 0 1 6 0 Brown 160 7

3 B 1 M S S S P 0 2 0 0 Yellow 200 7

3 B 1 M S S S P 0 2 5 0 White 250 7.5

3 B 1 M S S S P 0 3 0 0 Olive 300 7.5

Flow Controller Code Nozzle Discharge LPH @ Pressure

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

Used in uneven terrain.

Silicone part is designed to

ensure constant ow char-acteristics against pressure

variation. Uniform irrigationthroughout the network andincreased running lengths.

Used with micro-sprinklers withfemale inlet 6mm. Working

pressure 2 - 5 Atm.

3 B 1 M S E P F C 0 5 0 Orange 48 50 50 52 54 49 44 40 38

3 B 1 M S E P F C 0 7 0 Black 65 65 70 70 70 65 65 60 60

3 B 1 M S E P F C 0 9 0 Green 85 85 90 90 90 90 95 95 100

3 B 1 M S E P F C 1 0 5 Blue 100 100 105 105 105 100 95 95 90

3 B 1 M S E P F C 1 4 0 Pink 140 145 145 140 140 135 135 130 120

3 B 1 M S E P F C 2 0 0 Yellow 190 195 200 205 210 205 205 200 200

Note:- Flow controller is marked with water ow direction placed between micro-sprinkler and micro-tube PVC 7 mm. The external part of the Flow

Controller is color coded according to ow rate. Each ow controller is used with the micro-sprinkler of the same colour, Orange 50 LPH , Black 70 LPH,Blue 105 LPH, Pink 140 LPH and Yellow 200 LPH.

CHECK VALVE Code Colour Open (Bar) Close (Bar)

3 B 1 M S E P C V 0 0 1 Blue 1.8 1.0

3 B 1 M S E P C V 0 0 2 Red 0.6 0.4

Check Valve is used to avoid leakage of the micro-sprinklers when irrigation is terminated, thus avoiding plant burns that can resultin greenhouses where temperature can reach up to 45 degree during summer. It is available in Red and Blue colors. The Check

Valve closes the passage of water to the micro-sprinkler when the pressure is 0.4 - 0.5 ATM (red), 1 -1 .1 ATM (blue). It opens when

the pressure is above 0.6 - 0.7 ATM(Red) and 1.8 - 1.9 ATM (Blue). When used as a (switch), the water remains in the pipe. With thenext irrigation it runs into the network where irrigation begins simultaneously at all micro-sprinklers. Working pressure range is 2 - 5

ATM. Minimum required ltration is 120 mesh. Can be used together with a Flow Controller when placed before a micro-sprinklers.

Pressure Brown Yellow White Olive

Bar PSI l/h l/h l/h l/h

1.5 21.8 145 170 220 260

2.0 29.0 165 200 255 305

2.5 36.3 190 225 290 330

3.0 43.5 205 245 305 360

3.5 50.8 220 265 320 380

4.0 58.0 235 2880 340 400

MICRO SPRINKLERS


11/22


87

3b2 BRASS IMPACTSPRINKLERS

Adritec manufactures a wide range of brass impact sprinklers with standard nozzle sizes and discharge rates and wetting areas. Themain nozzle sizes offered are the , and 1 BSP /NPT male or female threaded. Sprinklers are made of a bronze body and arm. The

range available covers most application requirements. The springs are made of stainless steel.

CODE Nozzle Size Pressure Diameter Discharge

3B2BS0FS0031 mm Bar Mt LPM

1/2" NPT Male Threaded

3.17

2.07 21.3 9.00

Normal Angle - 24 Degrees 2.41 22.2 9.50

Bronze Body & Arm 2.76 23.2 10.30

Full Circle 3.10 23.8 10.50Single Nozzle 3.45 24.0 11.60

3.79 24.4 12.10

4.14 24.7 12.60

3B2BSPFS0035 mm Bar Mt LPM

1/2" BSP / NPT Threads

3.57

2.00 22.9 11.40

Standard Angle for maximum distance of throw 2.50 23.4 13.20

Bronze Body, Zinc Alloy Arm 3.00 23.8 14.40

Part Circle / Full Circle 3.50 24.3 15.00

Single Nozzle

3B2BSEFD5131 mm Bar Mt LPM

3/4" BSP / NPT Male Threads

5.13 x 3.17

3.00 27.8 30.00

Economy model 3.50 28.0 31.80

Bronze Body & Arm 4.00 28.2 34.20

Full Circle

Double Nozzle

3B2BS0FD5131 mm Bar Mt LPM


5.13 x 3.17

2.11 27.0 34.10

Angle 27 Degrees 2.46 29.0 36.80

Bronze Body & Arm 2.81 32.0 40.70

Full Circle 3.16 33.0 43.20

Brass Bearing Sleeve & Nipple 3.52 34.0 45.20

Stainless Steel Springs

Double Nozzle

3B2BS0FD7147 mm Bar Mt LPM

1" BSP 1 NPT Male & Female Threads

7.14 x 4.76

2.81 40.0 76.90

Bronze Body & Arm 3.16 41.0 81.80

Full Circle 5.15 42.0 86.40

Double Nozzle 3.87 43.0 90.90

4.22 44.0 95.50

3B2BSPFD4631 mm Bar Mt LPM


4.6 x 3.17

1.80 29.4 28.00

Bronze trip mechanism 2.16 30.0 30.80

Bronze Body & Arm 2.54 30.6 33.30

Part Circle / Full Circle 3.26 31.8 38.20

Double Nozzle 3.62 32.0 40.20

4.34 32.6 43.80

All sprinklers are brass bearing sleeve and nipples with stainless steel spring


12/22


88

3b3 PLASTIC IMPACTSPRINKLER

Specifcations Code Nozzle Size Pressure Diameter Discharge Sprinkler

Spacing

mm Bar Mt LPM Mt

1/2" NPT Male

threaded plasticbody, double nozzle,

full circle, 27 Deg.

throw angle, SSsprings, top cover

3B3PSF122018

( 2.0 x 1.8 ) 1.5 40.0 7.75 12x12

( 2.0 x 1.8 ) 2.0 42.0 9.45 12x12

( 2.0 x 1.8 ) 2.5 42.0 10.15 12x12

( 2.0 x 1.8 ) 3.0 44.0 10.90 12x12

3B3PSF122518

( 2.5 x 1.8 ) 1.5 44.0 9.75 12x12

( 2.5 x 1.8 ) 2.0 44.0 11.55 12x12

( 2.5 x 1.8 ) 2.5 42.0 13.15 18x18

( 2.5 x 1.8 ) 3.0 44.0 13.80 18x18

3B3PSF123018

( 3.0 x 1.8 ) 1.5 40.0 11.75 12x18

( 3.0 x 1.8 ) 2.0 40.0 13.10 12x18

( 3.0 x 1.8 ) 2.5 42.0 15.25 18x18

( 3.0 x 1.8 ) 3.0 44.0 16.50 18x18


Spacing

mm Bar Mt LPM Mt

3/4" NPT Male

threaded plasticbody, double nozzle,

27 Deg.

throw angle, full circle,SS springs

3B3PSF343823

( 3.8 x 2.3 ) 1.5 29.8 17.00 12x18

( 3.8 x 2.3 ) 2.0 33.2 20.00 12x18

( 3.8 x 2.3 ) 2.5 35.0 21.00 18x18

( 3.8 x 2.3 ) 3.0 36.4 2.27 18x18

( 3.8 x 2.3 ) 3.5 36.8 24.00 18x18

3B3PSF344132

( 4.15 x 3.2 ) 1.5 30.9 24.00 12x18

( 4.15 x 3.2 ) 2.0 34.4 28.00 12x18

( 4.15 x 3.2 ) 2.5 36.4 31.00 18x18

( 4.15 x 3.2 ) 3.0 37.6 34.00 18x18

( 4.15 x 3.2 ) 3.5 39.0 37.67 18x18

3B3PSF345042

( 5.0 x 4.2 ) 1.5 31.5 32.00 12x18

( 5.0 x 4.2 ) 2.0 35.6 35.67 12x18

( 5.0 x 4.2 ) 2.5 38.4 41.00 18x18

( 5.0 x 4.2 ) 3.0 40.0 45.67 18x18

( 5.0 x 4.2 ) 3.5 40.6 49.00 18x18


Spacing

mm Bar Mt LPM Mt

1/2" NPT Male Thread-ed plastic body,

double nozzle, full

circle, 27 deg. throwangle, SS Springs,

cover on top

3B3PSF122520

( 2.5 x 2.0 ) 1.5 22.0 10.17 12x12

( 2.5 x 2.0 ) 2.0 23.0 11.00 12x12

( 2.5 x 2.0 ) 2.5 23.0 13.00 18x18

( 2.5 x 2.0 ) 3.0 23.0 13.50 18x18

3B3PSF123018

( 3.0 x 1.8 ) 1.5 24.0 13.00 12x18

( 3.0 x 1.8 ) 2.0 24.0 13.33 12x18

( 3.0 x 1.8 ) 2.5 25.0 15.17 18x18

( 3.0 x 1.8 ) 3.0 27.0 16.17 18x18

3B3PSF123025

( 3.0 x 2.5 ) 1.5 22.0 12.67 12x18

( 3.0 x 2.5 ) 2.0 25.0 14.33 12x18

( 3.0 x 2.5 ) 2.5 25.0 16.33 18x18( 3.0 x 2.5 ) 3.0 25.0 17.50 18x18

Adritec manufactures a wide range of the plastic impact sprinklers with standard nozzle sizes and discharge rates and wetting areas.The main nozzle sizes offered are the , and 1 BSP /NPT male threaded. Sprinklers are made of a plastic body and arm. The range

available covers most application requirements. The springs are made of stainless steel.


13/22


89

PLASTIC IMPACT SPRINKLER


Spacing

mm Bar Mt LPM Mt

3/4" NPT Male Thread-ed plastic body,

double nozzle, 27 deg.

throw angle, full circle,SS springs. Plastic

distance control dif-

fuser pin allows up to25% reduction without

nozzle change

3B3PSF343823

( 3.8 X 2.3 ) 1.5 29.8 17.00 12x18

( 3.8 X 2.3 ) 2.0 33.2 20.00 12x18( 3.8 X 2.3 ) 2.5 35.0 21.00 18x18

( 3.8 X 2.3 ) 3.0 36.4 22.67 18x18

( 3.8 X 2.3 ) 3.5 36.8 24.00 18x18

3B3PSF344232

( 4.15 X 3.2 ) 1.5 30.9 24.00 12x18

( 4.15 X 3.2 ) 2.0 34.4 28.00 12x18

( 4.15 X 3.2 ) 2.5 36.4 31.00 18x18

( 4.15 X 3.2 ) 3.0 37.6 34.00 18x18

( 4.15 X 3.2 ) 3.5 39.0 37.67 18x18

3B3PSF345042

( 5.0 X 4.2 ) 1.5 39.0 32.00 12x18

( 5.0 X 4.2 ) 2.0 35.6 35.67 12x18

( 5.0 X 4.2 ) 2.5 38.4 41.00 18x18

( 5.0 X 4.2 ) 3.0 40.0 45.67 18x18

( 5.0 X 4.2 ) 3.5 40.6 49.00 18x18

Specifcations Code Nozzle Size Pressure Diameter Discharge SprinklerSpacing

mm Bar Mt LPM Mt

1" NPT Male Threaded

plastic body, double

nozzle, 27 deg.throw angle, full circle,

SS springs. Plastic

distance control dif-fuser pin allows up to

25% reduction without

nozzle change

3B3PSF105041 ( 5.0 X 4.1 ) 1.5 30.0 32.00 18x18

( 5.0 X 4.1 ) 2.0 34.8 37.00 18x18

( 5.0 X 4.1 ) 2.5 37.1 42.17 18x24

( 5.0 X 4.1 ) 3.0 39.1 45.50 24x24

( 5.0 X 4.1 ) 3.5 40.8 49.50 24x24

3B3PSF106041 ( 6.0 X 4.1 ) 1.5 30.9 39.00 18x18

( 6.0 X 4.1 ) 2.0 35.6 45.00 18x18

( 6.0 X 4.1 ) 2.5 39.0 49.67 18x24

( 6.0 X 4.1 ) 3.0 40.9 54.50 24x24

( 6.0 X 4.1 ) 3.5 41.7 57.67 24x24

3B3PSF107041 ( 7.0 X 4.1 ) 1.5 32.4 45.00 18x18

( 7.0 X 4.1 ) 2.0 38.2 55.00 18x18

( 7.0 X 4.1 ) 2.5 38.9 62.17 18x24

( 7.0 X 4.1 ) 3.0 41.2 69.17 24x24

( 7.0 X 4.1 ) 3.5 44.0 83.00 24x24


mm Bar Mt LPM Mt

3/4" NPT Male Thread-

ed plastic body, singlenozzle, 27 deg.

throw angle, part

circle, SS springs. Plas-tic distance control

diffuser pin allows up

to 25% reduction with-out nozzle change

3B3PSP343800

3.8 1.5 29.0 12.00 12x18

3.8 2.0 31.6 13.50 12x18

3.8 2.5 34.2 15.50 18x18

3.8 3.0 35.5 16.67 18x18

3.8 3.5 36.2 18.00 18x18

3B3PSP344200

4.15 1.5 29.5 15.17 12x18

4.15 2.0 33.1 17.17 12x18

4.15 2.5 35.8 19.67 18x184.15 3.0 37.7 21.67 18x18

4.15 3.5 39.2 23.17 18x18


mm Bar Mt LPM Mt

3/4" NPT Male Thread-

ed plastic body, single

nozzle, 27 deg.throw angle, part

circle, SS springs. Plas-

tic distance controldiffuser pin allows up

to 25% reduction with-

out nozzle change

3B3PSF345000

5.0 1.5 31.4 19.17 12x18

5.0 2.0 31.4 22.00 12x18

5.0 2.5 38.3 24.00 18x18

5.0 3.0 40.0 27.67 18x18

5.0 3.5 40.9 30.00 18x18

3B3PSF346000

6.0 1.5 31.4 24.50 12x18

6.0 2.0 35.4 28.00 18x18

6.0 2.5 38.7 32.00 18x24

6.0 3.0 41.3 34.17 18x246.0 3.5 42.2 37.50 18x24


14/22


0

3b4 RAIN GUNS

These sprinklers are of meduim discharge and are available in two full circle and part circle patterns. It is equipped with different inter-changeable nozzles and an adjustable jet-breaker providing a uniform distribution of water all over the irrigated area. The great simplic-

ity and large versatility are amongst its main features. it can be applied to all kinds of cultivations.

JOLLY Code Nozzle Size Pressure Jet Length Discharge

mm Bar Mt LPM m3 / Hr

1 1/4" Female Con-

nection screw. Com-

plete circle (JOLLY10125)/ Part circle

JOLLY 10124).

3B4GJ1012408

3B4GJ1012508

8.0 X 4.0

1.5 17 62 3.7

2.0 18 71 4.2

3.0 20 87 5.24.0 21 100 6.0

3B4GJ1012409

3B4GJ10125099.0 X 4.0

1.5 17 76 4.5

2.0 18 88 5.3

3.0 20 107 6.4

4.0 22 124 7.4

3B4GJ10124103B4GJ1012510

10.0 X 4.0

2.0 19 106 6.4

3.0 21 130 7.8

4.0 23 151 9.0

5.0 24 170 10.2

3B4GJ1012412

3B4GJ101251212.0 X 4.0

2.0 21 149 8.9

3.0 24 182 10.9

4.0 26 211 12.6

5.0 28 236 14.2

3B4GJ10124143B4GJ1012514

14.0 X 4.0

2.0 23 197 11.8

3.0 24 241 14.4

4.0 27 278 16.7

5.0 29 311 18.6

AMBO Code Nozzle Size Pressure Jet Length Discharge


1 1/2" Female Con-

nection screw. A com-plete circle (AMBO

10010) and a part

circle AMBO 10011).

3B4GA10010083B4GA1001108

7.0 X 8.0

1.5 16 86 5.1

2.0 18 99 5.9

3.0 20 121 7.2

4.0 21 140 8.4

3B4GA1001010

3B4GA1001110

7.0 X 10.0

2.0 18 130 7.8

3.0 21 159 9.5

4.0 23 184 11.05.0 25 207 12.4

3B4GA10010123B4GA1001112

7.0 X 12.0

2.0 20 169 10.1

3.0 22 207 12.4

4.0 25 239 14.3

5.0 28 269 16.1

3B4GA1001014

3B4GA10011147.0 X 14.0

2.0 21 215 12.9

3.0 24 264 15.8

4.0 26 305 18.3

5.0 29 342 20.5

3B4GA10010163B4GA1001116

7.0 X 16.0

2.0 21 267 16.0

3.0 24 328 19.6

4.0 27 379 22.7

5.0 29 414 24.8


15/22


91

RAIN GUNS

Duplex Code Nozzle Size Pressure Jet Length Discharge


2" Female Connectionscrew. Full circle (Du-

plex 10158), part circle(Duplex 10137)

3B4GD1015812

3B4GD101371212.0 X 8.0

1.5 20 159 9.5

2.0 23 184 11.0

3.0 27 224 13.4

4.0 30 259 15.5

3B4GD1015814

3B4GD101371414.0 X 8.0

2.0 25 230 13.8

3.0 29 280 16.8

4.0 32 325 19.5

5.0 34 364 21.8

3B4GD1015816

3B4GD101371616.0 X 8.0

2.0 27 282 16.9

3.0 31 344 20.6

4.0 34 399 23.9

5.0 37 448 26.7

3B4GD10158183B4GD1013718

18.0 X 8.0

2.0 28 343 20.6

3.0 33 434 26.0

4.0 36 506 30.3

5.0 40 561 33.6

3B4GD1015820

3B4GD101372020.0 X 8.0

2.0 29 411 24.6

3.0 34 520 31.2

4.0 38 606 36.3

5.0 43 657 39.4

Mercury Code Nozzle Size Pressure Jet Length Discharge


2" Female Connectionscrew. Full circle

3B4GM1024814 14.0

2.0 24 245 14.7

3.0 27 299 17.9

4.0 30 346 20.7

5.0 33 387 23.2

3B4GM1024816 16.0

2.0 26 297 17.8

3.0 28 363 21.8

4.0 32 420 25.2

5.0 35 469 28.1

3B4GM1024818 18.0

3.0 32 452 27.1

4.0 35 527 31.6

5.0 38 584 35.0

6.0 41 645 38.7

3B4GM1024820 20.0

3.0 34 538 32.3

4.0 38 627 37.6

5.0 41 680 40.8

6.0 45 769 46.1

3B4GM1024822 22.0

3.0 36 609 36.5

4.0 39 705 42.3

5.0 43 789 47.3

6.0 46 864 51.8


16/22


2

Skipper Code Nozzle Size Pressure Jet Length Discharge


1 1/2" Female

Connection screw.Full circle

3B4GS1013412 12.0 X 6.0

2.0 22 159 9.5

3.0 25 194 11.6

4.0 28 224 13.4

5.0 31 252 15.1

3B4GS1013414 14.0 X 6.0

2.0 24 195 11.7

3.0 27 251 15.0

4.0 30 290 17.4

5.0 33 324 19.4

3B4GS1013416 16.0 X 6.0

2.0 26 257 15.4

3.0 29 315 18.9

4.0 32 364 21.8

5.0 35 406 24.3

3B4GS1013418 18.0 X 6.0

2.0 28 318 19.0

3.0 31 404 24.2

4.0 34 471 28.3

5.0 37 521 31.3

3B4GS1013420 20.0 X 8.0

2.0 30 354 21.2

3.0 33 490 29.4

4.0 37 571 34.3

5.0 41 617 37.0

Mariner Code Nozzle Size Pressure Jet Length Discharge


2 1/2" Female

Connection screw.

Full circle

3B4GM1016526 26.0

3.0 42 800 48.0

4.0 47 926 55.5

5.0 51 1036 62.2

6.0 54 1135 68.1

3B4GM1016528 28.0

3.0 45 917 56.0

4.0 49 1061 63.7

5.0 52 1186 71.2

6.0 55 1300 78.0

3B4GM1016530 30.0

4.0 50 1207 72.4

5.0 54 1350 81.0

6.0 57 1479 88.7

7.0 61 1594 96.6

3B4GM1016532 32.0

4.0 52 1361 81.7

5.0 56 1522 91.3

6.0 59 1668 100.0

7.0 62 1798 107.9

3B4GM1016534 34.0

4.0 57 1708 102.5

5.0 61 1872 112.3

6.0 64 2018 121.0

7.0 67 2162 129.7

RAIN GUNS


17/22


93

The superlock extra high pressure piping system is a double hook coupling system with springs for extra security. All

metal parts are zinc plated with passivation, interchangeable with Quicklock system. Available in diameters 63, 75,

90 and 110 mm, maximum working pressure: SL with single thickness hook: 63, 75 - 5.9 bar, 90 - 4 bar. SL-HP (high pres-sure) with double thickness hook: 90, 110 - 7 bar.

Super Lock Extra

Code Size

Coupler Set - Male / Female

3B5HDSXMF075 75 mm

3B5HDSXMF090 110mm

3B5HDSXMF110 125mm

3B5HDSXMF125 140mm

3B5HDSXMF160 160mm

Elbow 45 degree

3B5HSXEL4075 75 mm

3B5HSXEL4110 110mm

3B5HSXEL4125 125mm

3B5HSXEL4140 140mm

3B5HSXEL4160 160mm

Elbow 90 degree

3B5HSXEL9075 75 mm

3B5HSXEL9110 110mm

3B5HSXEL9125 125mm

3B5HSXEL9140 140mm

3B5HSXEL9160 160mm

Flanged Coupler

3B5HDSXCF110 110 mm

3B5HDSXCF125 125 mm

3B5HDSXCF140 140 mm

3B5HDSXCF160 160 mm

Screwed Coupler

3B5HDSXCS075 75 mm x 3" asp thread

Code Size

End Stop

3B5HDSXES075 75 mm

3B5HDSXES110 110mm

3B5HDSXES125 125mm

3B5HDSXES140 140mm

3B5HDSXES160 160mm

Valve Opener

3B5HDSXVO075 75 x 100 mm





Insert Valve Coupler

3B5HDSXVC110 110 x 100 mm




Insert Sprinkler Coupler

3B5HSXISC075 75 mm x 1 1/4"

3B5HSXISC110 1 1 0 mm x 1 1/4"

3B5HSXISC125 1 25 mm x 1 1/4"

3B5HSXISC140 1 4 0 mm x 1 1/4"

3B5HSXISC160 1 6 0 mm x 1 1/4"

Reducer Coupler

3B5HSXRC1175 110 X 75 mm

3B5HSXRC1211 125 X 110 mm

3B5HSXRC1412 140 X 125 mm

3B5HSXRC1614 160 X 140 mm

Tee

3B5HDSXTE075 75 mm

3B5HDSXTE110 110mm

3B5HDSXTE125 125mm

3B5HDSXTE140 140mm

3B5HDSXTE160 160mm

3b5 HDPE SPRINKLERSYSTEM PIPES


18/22


4

Unique twist to lock, twist to unlock coupler smooth design, no attached or metal parts. Range of ttings available

in diameters 63, 75 and 90 mm, and maximum working pressure is 5 bar. A special ring RTSX is available for water-tight sealing of permanent or semi permanent pipelines

Easy coupling and uncoupling, tensioners ensure hooks remain in any required position - open for easy coupling,closed for secure locking. Fittings are interchangeable with Super Lock system. Available in diameters 63 and 75 mm,

maximum working pressure is 5 bar.

Roto Lock PIPING SYSTEM

Quik Lock PIPING SYSTEM

Code Size

Coupler Set Male / Female

3B5HRLMF0063 63 mm

3B5HRLMF0075 75 mm

3B5HRLMF0090 90mm

Starter Coupler

3B5HRLSCM063 63 mm x 2" BSP thread

3B5HRLSCM075 75 mm x 2 1/2" BSP thread

3B5HRLSCM090 90 mm x 3" BSP thread


3B5HRLlSC263 63 mm, 3/4" outlet



Reducer Coupler

3B5HRLRC7563 75 x 63 mm

3B5HRLRC9075 90 x 75mm

Code Size

Elbow 90 degree

3B5HRLEL9063 63 mm

3B5HRLEL9075 75 mm

3B5HRLEL9090 90 mm

Side Tee3B5HRLST0063 63 mm

3B5HRLST0075 75 mm

3B5HRLST0090 90 mm

End Stop

3B5HRLES0063 63 mm

3B5HRLES0075 75 mm

3B5HRLES0090 90 mm

Code Specs


3B5HQLMF0063 63 mm

3B5HQLMF0075 75 mm

Starter Coupler

3B5HQLPCN063 63 mmx 2" BSP thread

3B5HQLPCN075 75 mm x 2 '12" BSP thread


3B5HQLISC263 63 mm, 3/4" outlet

3B5HQLISC275 75 mm, 3/4" outlet

Reducer Coupler

3B5HQLRC7563 75 x 63 mm

Code Specs

Elbow 90 degree

3B5HQLEL9063 63 mm

3B5HQLEL9075 75 mm

Side Tee

3B5HQLST0063 63 mm

3B5HQLST0075 75 mm

End Stop

3B5HQLES0063 63 mm

3B5HQLES0075 75 mm

HDPE SPRINKLERSYSTEM PIPES


19/22


95

The Superlock piping system is a double hook coupling system with springs, all metal parts are zinc plated with passiva-tion, interchangeable with Quicklock system. Available in diameters 63, 75, 90, and 110mm, maximum working pres-

sure: SL with single thickness hook: 63, 75, @ 5.9 bar, 90 @ 4 bar. SL (High Pressure) with double hook: 90 - 110 @ 7 bar.

Super Lock PIPING SYSTEM

Code Size


3B5HDSLMF063 63 mm

3B5HDSLMF075 75 mm

3B5HDSLMF090 90mm

3B5HDSLMF110 110mm


3B5HSLISC290 90 mm, 3/4"outlet


3B5HSLlSC263 63 mm, 3/4" outlet

3B5HSLlSC275 75 mm, 3/4'' outlet


3B5HSLISC575 75 mm, 1 1/4'' outlet

Flanged Coupler

3B5HSLFCO110 110mm

Starter Coupler

3B5HSLSCM063 63 mm x 2" BSP thread

3B5HSLSCM075 75 mm x 2 '12" BSP thread

3B5HSLSCM090 90 mm x 3" BSP thread

Code Size

Elbow 90 degree

3B5HSLEB9063 63 mm

3B5HSLEB9075 75 mm

3B5HSLEB9090 90mm

3B5HSLEB9110 110mm

End Stop

3B5HSLES0063 63 mm

3B5HSLES0075 75 mm

3B5HSLES0090 90mm

3B5HSLES0110 110mm

Reducer Coupler

3B5HSLRC7563 75 x 63 mm

3B5HSLRC9075 90 x 75 mm

3B5HSLRC1190 110 x 90mm

Side Tee

3B5HSLTE0063 63 mm

3B5HSLTE0075 75 mm

3B5HSLTE0090 90mm

3B5HSLTE0110 110mm

The Easiloc piping system are tted to HDPE pipes of different pressure classes and thicknesses according to applica-

tions. They are welded on by a fusion welding process that ensures a very strong bond between coupler and pipe.

It is a fast and simple way to connect pipes with no loss in parts, a reliable system featuring high quality sealing rings.The fusion welding of coupler and pipe gives extra tolerance to high pressure. It is available in sizes up to 75mm and

a working pressure of 5.9 bars.

Easiloc Piping System

Code Specs

Pipe

3B5HSELMF075 75mm with Coupler

Starter Coupler

3B5HSELCM075 75 EL PCN 2 1/2" BSP


3B5HELISC263 63 x 3/4"

3B5HELISC275 75 x 3/4"

Reducer Coupler

3B5HELRC7563 75mm X 63mm

Code Specs90 Degree Bend

3B5HELEL9075 75mm

Side Tee

3B5HELSTE075 75mm

End Stop

3B5HELES0063 63mm

3B5HELES0075 75mm

HDPE SPRINKLERSYSTEM PIPES


20/22


6

Aluminium sprinkler pipe systems are made from a light weight aluminium alloy which is welded to couplers made of a cast alloy. It isapplicable for different types of farms and crops and is widely used in rugged hilly terrain where high pressure and light weight pipes are

essential. Pipes are produced from aluminium alloy 63400WP while couplers are from aluminium LM6. Pipes are available in different sizes

2, 3, 4, 5, and 6 (50, 75, 100, 125, 150 mm) and a standard length 5.8 & 6.0 meters. Manufactured in accordance to American orEuropean standards. Maximum working pressure for all pipes and couplers in all diameters is 9 bar. Welding for both pipe and couplers

is done by auto MIC which minimizes heating so aluminium retains its strength. It uses a single hook bauer type coupler. A wide range of

ttings is available to cover all system requirements.

3b6ALUMINIUM

SPRINKLERSYSTEM PIPES

Table of Thicknesses

2" 50mm 3" 75mm 4" 100mm 5" 125mm 6" 150 mm

1.27mm 1.32mm 1.47mm

SEHDPE System Maximum Working Pressure

Pressure Rating Working Pressure 90 to 110 mm Diamter 75mm Diameter

bar Mpa bar Mpa bar Mpa

PN 2.5 2.50 0.25 5.70 0.57 5.70 0.57

PN 4.0 4.00 0.40 8.50 0.85 8.50 0.85

PN 6.0 6.00 0.60 13.40 1.34 8.50 0.85

PN 10.0 10.00 1.00 17.00 1.70

Class

1 2.50 0.25 4.90 0.49 4.90 0.49

2 3.20 0.32 6.10 0.61 6.10 0.61

3 4.00 0.40 7.50 0.75 7.50 0.75

4 6.00 0.60 11.30 1.13 8.50 0.85

Aluminium Pipes Diameter Pressure Rating

Code mm Bar

3B6ALP250050 50 2.5

3B6ALP400050 50 4

3B6ALP600050 50 6

3B6ALP250075 75 2.5

3B6ALP400075 75 4

3B6ALP600075 75 6

3B6ALP250090 90 2.5

3B6ALP400090 90 4

3B6ALP600090 90 6

3B6ALP100090 90 10

3B6ALP250100 100 2.5

3B6ALP400100 100 4

3B6ALP600100 100 6

3B6ALP100100 100 10

3B6ALP250125 125 2.5

3B6ALP400125 125 4

3B6ALP600125 125 6

3B6ALP100125 125 10

3B6ALP250150 150 2.5

3B6ALP400150 150 4

3B6ALP600150 150 6

3B6ALP100150 150 10


21/22


97

3b7 HDPE FUSIONWELDEDPIPES

The couplers in this system are tted to HDPE pipes of different pressure classes and thicknesses through a fusion welding process thatensures a very strong bond between coupler and the pipe. It is a fast and simple way to connect the pipes with different types of ttings

to complete a sprinkler irrigation set. Available in different sizes up to 160mm and a working pressure of 6 bars. These pipes are available

in lenghts of 5m and 6m per pipe.

Code Size mm

5m Pipe with Latch Coupler

3B7HDSSP5050 50

3B7HDSSP5063 633B7HDSSP5075 75

3B7HDSSP5090 90

3B7HDSSP5110 110

3B7HDSSP5125 125

3B7HDSSP5160 160

Code Size mm

Male Blind Plug

3B7HDSMP0050 50

3B7HDSMP0063 633B7HDSMP0075 75

3B7HDSMP0090 90

3B7HDSMP0110 110

3B7HDSMP0125 125

3B7HDSMP0160 160

Female Blind Plug

3B7HDSFP0050 50

3B7HDSFP0063 63

3B7HDSFP0075 75

3B7HDSFP0090 90

3B7HDSFP0110 110

3B7HDSFP0125 125

3B7HDSFP0160 160

Insert Sprinker Coupler

3B7HDSCS0751 75 x 1"

3B7HDSCS0901 90 x 1"

3B7HDSCS0111 110 x 1"

Male Pump Connection

3B7HDSPM5012 50 x 1 1/2"

3B7HDSPM6320 63 x 2"

3B7HDSPM7522 75 x 2 1/2"

3B7HDSPM9030 90 x 3"

3B7HDSPM1140 110 x 4"

3B7HDSPM1242 125 x 4 1/2"

3B7HDSPM1660 160 x 6"

Plastic Riser 1"

3B7HDRP01025 25

3B7HDRP01035 35

3B7HDRP01050 50

3B7HDRP01060 60

3B7HDRP01100 100

Female Pump Connection

3B6HDSPF5012 50 x 1 1/2"

3B7HDSPF6320 63 x 2"

3B7HDSPF7522 75 x 2 1/2"

3B7HDSPF9030 90 x 3"

3B7HDSPF1140 110 x 4"

3B7HDSPF1242 125 x 4 1/2"

3B7HDSPF1660 160 x 6"

Line Valve

3B7HDSVL0050 50

3B7HDSVL0063 63

3B7HDSVL0075 75

3B7HDSVL0090 90

3B7HDSVL0011 110

3B7HDSVL0012 125

Coupling

3B7HDC000010 1"

6m Pipe with Latch Coupler

3B7HDSSP6050 50

3B7HDSSP6063 63

3B7HDSSP6075 75

3B7HDSSP6090 90

3B7HDSSP6110 110

3B7HDSSP6125 125

3B7HDSSP6160 160


22/22


8

Cross

3B7HDSC05050 50 x 50

3B7HDSC06350 63 x 50

3B7HDSC06363 63 x 63

3B7HDSC07550 75 x 50

3B7HDSC07563 75 x 63

3B7HDSC07575 75 x 75

3B7HDSC09050 90 x 50

3B7HDSC09063 90 x 63

3B7HDSC09075 90 x 75

3B7HDSC09090 90 x 90

3B7HDSC01150 110 x 50

3B7HDSC01163 110 x 63

3B7HDSC01175 110 x 75

3B7HDSC01190 110 x 90

3B7HDSC01111 110 x 110

3B7HDSC1250 125 x 50

3B7HDSC1263 125 x 63

3B7HDSC1275 125 x 75

3B7HDSC1290 125 x 90

3B7HDSC1211 125 x 110

3B7HDSC1212 125 x 125

3B7HDSC1675 160 x 75

3B7HDSC1690 160 x 90

3B7HDSC1611 160 x 110

3B7HDSC1612 160 x 125

3B7HDSC1616 160 x 160

Code Size mm

Reducer

3B7HDSR06350 63 x 50

3B7HDSR07550 75 x 503B7HDSR07563 75 x 63

3B7HDSR09050 90 x 50

3B7HDSR09063 90 x 63

3B7HDSR09075 90 x 75

3B7HDSR01150 110 x 50

3B7HDSR01163 110 x 63

3B7HDSR01175 110 x 75

3B7HDSR01190 110 x 90

3B7HDSR1250 125 x 50

3B7HDSR1263 125 x 63

3B7HDSR1275 125 x 75

3B7HDSR1290 125 x 90

3B7HDSR1211 125 x 110

3B7HDSR1675 160 x 75

3B7HDSR1690 160 x 90

3B7HDSR1611 160 x 110

3B7HDSR1612 160 x 125

Code Size mm

Rubber Gasket

3B7HDSGR0050 50

3B7HDSGS0063 633B7HDSGR0075 75

3B7HDSGR0090 90

3B7HDSGR0110 110

3B7HDSGR0125 125

3B7HDSGR0160 160

Elbow

3B7HDSEL9050 50

3B7HDSEL9063 63

3B7HDSEL9075 75

3B7HDSEL9090 90

3B7HDSEL9011 110

Reducer Coupling

3B7HDRC01034 1 x 3/4"

3B7HDRC01012 1 x 1/2"

Tee

3B7HDST05050 50 x 50

3B7HDST06350 63 x 50

3B7HDST06363 63 x 63

3B7HDST07550 75 x 50

3B7HDST07563 75 x 63

3B7HDST07575 75 x 75

3B7HDST09050 90 x 50

3B7HDST09063 90 x 63

3B7HDST09075 90 x 75

3B7HDST09090 90 x 90

3B7HDST01150 110 x 50

3B7HDST01163 110 x 63

3B7HDST01175 110 x 75

3B7HDST01190 110 x 90

3B7HDST01111 110 x 110

3B7HDST1250 125 x 50

3B7HDST1263 125 x 63

3B7HDST1275 125 x 75

3B7HDST1290 125 x 90

3B7HDST1211 125 x 110

3B7HDST1212 125 x 125

3B7HDST1675 160 x 75

3B7HDST1690 160 x 90

3B7HDST1611 160 x 110

3B7HDST1612 160 x 125

3B7HDST1616 160 x 160

HDPE FUSIONWELDEDPIPES

Documents

3-PIVOT & SPRINKLER SYSTEMS (1).pdf