WWW.UNITEDASSETSALES.COM

LARGE MACHINE SHOP, FABRICATION EQUIPMENT, OVERHEAD CRANES, (95) VIDMAR CABINETS, ROUGH TERRAIN CRANES, FORKLIFTS, UTILITY VEHICLES, CAR & TRUCK FLEET, BOATS, AIR COMPRESSORS, MOTORS, PUMPS, FACILITY SUPPORT EQUIPMENT, MAINTENANCE ITEMS, TENT,

METAL MATERIAL & RELATED ITEMS

OFFICE 818.264.4232 | ROY@UNITEDASSETSALES.COM

7115 KRICK RD., PO BOX 461118, WALTON HILLS, OH 44146OFFICE: (440) 498-8484 | JGREENE@FLSALES.COM

www.flsales.com

IN CONJUNCTION WITH:

PUBLIC WEBCAST AUCTIONPUBLIC WEBCAST AUCTIONBID ONSITE OR BID ONLINEBID ONSITE OR BID ONLINE

NATURAL GAS POWER PLANT 3-DAY AUCTION: WEDNESDAY, JUNE 5, THURSDAY,

JUNE 6 & FRIDAY, JUNE 7 AT 9:00 AM PDT INSPECTION: MONDAY, JUNE 3 & TUESDAY, JUNE 4 FROM 9:00 AM PDT TO 3:00 PM PDT

LOCATION: 696 W. 10TH STREET, PITTSBURG, CA

3-DAY

22 TON CAPACITY 1 OF 2

ONLINE BIDDING PROVIDED BY

CALL ROY GAMITYAN: 818-264-4232 EMAIL: ROY@UNITEDASSETSALES.COM

OR VISIT: WWW.UNITEDASSETSALES.COM

FOR COMPLETE SALE INFORMATION

WWW.UNITEDASSETSALES.COM23945 Calabasas Rd., Ste. 209, Calabasas, CA 91302 Office 818.264.4232 | roy@unitedassetsales.com

ROY GAMITYAN, AUCTIONEER CA Bond# 63388305

PUBLIC WEBCAST AUCTIONBID ONSITE OR BID ONLINE

NATURAL GAS POWER PLANT3-DAY AUCTION: WEDNESDAY, JUNE 5, THURSDAY, JUNE 6 & FRIDAY, JUNE 7 AT 9:00 AM PDTINSPECTION: MONDAY, JUNE 3 & TUESDAY, JUNE 4 FROM 9:00 AM PDT TO 3:00 PM PDTLOCATION: 696 W. 10TH STREET, PITTSBURG, CA TERMS OF PAYMENT: CASH, CASHIER’S CHECK, BUSINESS CHECK WITH BANK LETTER OF GUARANTEE, BANK WIRE TRANSFER. FULL PAYMENT MUST BE MADE NO LATER THAN 24 HOURS OF WINNING BID.REMOVAL: ALL MACHINE SHOP & WAREHOUSE ITEMS MUST BE REMOVED NO LATER THAN FRIDAY, JUNE 21. MAJOR PLANT ITEMS REMOVAL TBD. PREPPING, REMOVAL, LOADING & TRUCKING IS THE RESPONSIBILITY OF THE BUYER.BUYER’S PREMIUM: 10% FOR ALL ONSITE PURCHASES AND 13% FOR ALL ONLINE PURCHASES.

MACHINE SHOP

SOME ITEMS SUBJECT TO PRIOR SALE & RESERVE

INSPECTION AND AUCTION DAY REQUIREMENTS FOR ALL IN ATTENDANCE: NO OPEN TOE SHOES, NO SHORTS, NO CHILDREN UNDER 18 YEARS OLD, HARD HATS AND SAFETY GLASSES REQUIRED DURING INSPECTION PERIOD. DRIVER’S LICENSE OR PHOTO ID REQUIRED.

LEBLOND REGAL SERVO SHIFT SLIDING GAP BED ENGINE LATHE, S/N 6H 1003, 24” / 52” SWING, 102 / 166” CENTERS, 18” 4-JAW CHUCK, 37” FACE PLATE, 2 1/8” SPINDLE BORE, (12) SPINDLE SPEEDS 27 – 1080 RPM, INCH & METRIC THREADING, STEADY RESTLEBLOND ENGINE LATHE, S/N NI 1336, 36” SWING, 166” CENTERS, 32” 4-JAW CHUCK, 36” FACE PLATE, 3” SPINDLE BORE, (36) SPINDLE SPEEDS 6 – 625 RPM, TAPER ATTACHMENT, (2) STEADY REST

LEBLOND ENGINE LATHE, 20” SWING, 156” CENTERS, 18” 4-JAW CHUCK, 1.5” SPINDLE BORE, (24) SPINDLE SPEEDS 16 – 1010 RPM, TAPER ATTACHMENT, STEADY RESTLEBLOND REGAL SERVO SHIFT ENGINE LATHE, S/N 11E 544, 20” SWING, 144” CENTERS, 15” 4-JAW CHUCK, 2.75” SPINDLE BORE, (12) SPINDLE SPEEDS 40 – 1600 RPM, INCH & METRIC THREADING, TAPER ATTACHMENT, STEADY RESTLEBLOND ENGINE LATHE, S/N NE 8907, 20” SWING, 60” CENTERS, 17” 4-JAW CHUCK, 1.5” SPINDLE BORE, (24) SPINDLE SPEEDS 16 – 1010 RPM, TAPER ATTACHMENTCLAUSING CHOLCHESTER ENGINE LATHE, S/N 7-0223-16085DD, 17” SWING, 108” CENTERS, 12” 3-JAW CHUCK, 3” SPINDLE BORE, SPINDLE SPEEDS 0 – 2500 RPM, INCH & METRIC THREADING, TAPER ATTACHMENTCLAUSING CHOLCHESTER ENGINE LATHE, S/N LVT50SILJV-05147, 15” SWING, 54” CENTERS, 10” 3-JAW CHUCK, 2” SPINDLE BORE, (16) SPINDLE SPEEDS 20 – 1600 RPM, INCH & METRIC THREADING, TAPER ATTACHMENT, STEADY REST

BRIDGEPORT ROMI ENGINE LATHE, MODEL 13-5, S/N 18278 210, 13” SWING, 60” CENTERS, 8” 4-JAW CHUCK, 1.5” SPINDLE BORE, (12) SPINDLE SPEEDS 50 – 2500 RPM, INCH & METRIC THREADING, TAPER ATTACHMENTBRIDGEPORT ROMI ENGINE LATHE, MODEL 13-5, S/N 20092 220, 13” SWING, 60” CENTERS, 8” 3-JAW CHUCK, 1.5” SPINDLE BORE, (12) SPINDLE SPEEDS 50 – 2500 RPM, INCH & METRIC THREADING, TAPER ATTACHMENT54” BULLARD CUTMASTER VERTICAL TURRET LATHE, S/N 28758, 54” DIA. 4-JAW CHUCK, 62” MAX. SWING, (20) TABLE SPEEDS 4.4 – 160 RPM, 5-POSITION TURRET RAIL HEAD, 45” UNDER RAIL, SIDE HEAD, PENDANT CONTROL, 2-AXIS NEWALL D.R.O.30” BULLARD CUTMASTER VERTICAL TURRET LATHE, S/N 28114, 30” DIA. 4-JAW CHUCK, 36” MAX. SWING, (20) TABLE SPEEDS 6.2 – 220 RPM, 5-POSITION TURRET RAIL HEAD, 25” UNDER RAIL, SIDE HEAD, PENDANT CONTROLCINCINNATI GILBERT HORIZONTAL BORING MILL, TABLE TYPE, S/N 908, 3.75” SPINDLE DIA. W/ #5 MORSE TAPER, 48” X 53” TABLE, (48) SPINDLE SPEEDS 8-1000 RPM, 54” VERTICAL TRAVEL, FACING HEAD, RIGHT ANGLE HEAD, TAILSTOCK, 3-AXIS NEWALL D.R.O.36” X 36” CINCINNATI GILBERT ROTARY TABLE2 H.P. BRIDGEPORT SERIES II VERTICAL MILL, S/N 6420S, 11” X 58” TABLE W/ POWER FEED, SPINDLE SPEEDS 60-4200 RPM, 2-AXIS NEWALL D.R.O.BLANCHARD NO.18 ROTARY SURFACE GRINDER, S/N 7911, 42” DIA. ELECTRO-MAGNETIC CHUCK, ½” CHUCK LIFE, SEGMENTED WHEEL, WET BASE W/ COOLANT PUMPMORRISON 1 ¼” KEYSEATER, S/N K54-720KAO-MING KMR-1250DH RADIAL ARM DRILL, S/N 20015 (1990), 4’ ARM, 13” COLUMN, 11” QUILL TRAVEL, SPINDLE #5 MORSE TAPER, 20” X 24” X 20” BOX TABLECINCINNATI BICKFORD RADIAL ARM DRILL, 4’ ARM, 9” COLUMN, (9) SPINDLE SPEEDS 60 – 1200 RPM, 9” QUILL TRAVEL, SPINDLE #4 MORSE TAPER, 20” X 24” X 20” BOX TABLE20” WILTON #2015 DRILL PRESS, 80-1200 RPM, 25” X 18” TABLE, 115 VOLT 20” WILTON #2234AC DRILL PRESS, S/N 603024365-2000 RPM, 15” X 18” TABLE, 440 VOLTBUFFALO DRILL PRESS, 20” DIA. TABLE75 TON DAKE #5-075 ELEC-DRAULIC H-FRAME SHOP PRESS, S/N 190025, 44” BETWEEN POST75 TON DAKE #75H H-FRAME SHOP PRESS, S/N 162432, 44” BETWEEN POSTCHEVALIER FSG-1632AD HYDRAULIC SURFACE GRINDER, S/N G3812002, 16” X 32” ELECTRO-MAGNETIC CHUCK, INCREMENTAL DOWNFEED, COOLANT FILTER SYSTEM (ANTIOCH LOCATION)IRD BALANCING MACHINE (ANTIOCH LOCATION)UNIVERSAL EQUIPMENT BLAST CABINET W/ RECLAIM SYSTEM (ANTIOCH LOCATION)JBI FRONT LOAD PARTS WASHER, S/N 00169 (ANTIOCH LOCATION)(2) PHOENIX #9C DRYROD ELECTRODE STABILIZING OVEN, TYPE 900, TEMP. RANGE 100-550 DEG. F (ANTIOCH LOCATION)PHOENIX #12 DRYROD ELECTRODE STABILIZING OVEN, TYPE 900, TEMP. RANGE 100-550 DEG. F (ANTIOCH LOCATION)

FABRICATION & WELDINGMARVEL SERIES 8 MARK II VERTICAL BAND SAW, S/N 826028-W, 18” X 22” CAPACITYMARVEL SERIES 8 VERTICAL BAND SAW, S/N 810675, 18” X 22” CAPACITYDOALL 2013-V VERTICAL BAND SAW, S/N 457-911868 (1991), 20” THROAT, 13” MAX. WORK HEIGHTWF WELLS V2014F VERTICAL BAND SAW, S/N 775011, BLADE WELDER, 20” THROAT, 14” MAX. WORK HEIGHTGROB 4V-18 VERTICAL BAND SAW, S/N 1151, BLADE WELDER, 18” THROAT, 12” MAX. WORK HEIGHTRACINE HYDRAULIC POWER SHEAR CUT HACK SAW, 9” X 12” CAPACITY, 21” BLADE, 60-90-130 BLADE SPEEDSPIRANHA P90 HYDRAULIC IRON WORKER, S/N P90-602, 90 TON CAPACITY, 12” BRAKE ATTACHMENT, FOOT PEDAL CONTROLRICHARDS MUB 25 HYDRAULIC RAM BENDER, S/N 261JET FS1652 FOOT SHEAR, S/N 29011, 16 GA. X 52” CAPACITYJET HB-16121F HAND BRAKE, S/N 27065, 16 GA. X 121” CAPACITYTENNSMITH 4822 FINGER BRAKE, S/N 05401, 22 GA. X 48” CAPACITYLOCKFORMER 36” MANUAL SLIP ROLLMILLER BOBCAT 225 NT GAS POWERED WELDER GENERATOR, S/N LC691831MILLER SYNCROWAVE 351 TIG WELDER, S/N KE637098MILLER SYNCROWAVE 250 DX TIG WELDER, S/N LE074600MILLER DIALARC HF ARC WELDER, S/N KD412431, DIGI-METER 1500 RMS VOLTAGE MONITORMILLER DIALARC HF ARC WELDER, S/N KB104290MILLER XMT 304 CC/CV MULTIPROCESS WELDER, S/N KH303558THERMAL ARC PROPLUS 400MST WELDER, S/N L42903A103072ATHERMAL ARC MST300 WELDER, W/ LINCOLN LN-25 WIRE FEEDERPOWCON 300SS WELDER(4) PHOENIX #9C DRYROD ELECTRODE STABILIZING OVEN, TYPE 900, TEMP. RANGE 100-550 DEG. F

MACHINE SHOP SUPPORT ITEMS

WAREHOUSE ITEMS

OFFICE & KITCHEN

CRANES

TOOLING, POWER TOOLS, WELDING WIRE, WELDING TABLES, WORK BENCHES, CARTS, CLAMPS, SHOP FANS, PEDESTAL GRINDERS, HAND TOOLS, POWER TOOLS, MAINTENANCE SHOP TOOLS & EQUIPMENT SUPPLIES, BANDING CARTS AND RELATED ITEMS

POWER CIRCUIT BREAKERS, BATTERY PACKS, RIGHT ANGLE FAN DRIVES, VALVES, PUMPS, GEAR REDUCERS, VIDMAR CABINETS, PALLET RACKING, METAL SHELVING, CARBON STEEL PIPE FITTINGS, BRASS COUPLERS, STAINLESS STEEL NUTS/BOLTS, ELECTRICAL PIPE FITTINGS, IMPACT SOCKETS, TORQUE WRENCHES, RIGID PIPE DIES, SLUG WRENCHES, RIGGING CABLES, HOISTS, JOB BOXES, POWER TOOLS, WELDING TABLES, WORK BENCHES, CARTS, CLAMPS, SHOP FANS, PEDESTAL GRINDERS, HAND TOOLS, POWER TOOLS, STEEL SHELF UNITS, MAINTENANCE SHOP TOOLS & EQUIPMENT SUPPLIES, BANDING CARTS, METAL PIPE AND RELATED ITEMS

ALLIED 10 TON AND MOFFETT 10 TON CRANES

10 TON CAPACITY 10 TON CAPACITY

PUBLIC WEBCAST AUCTION

ROUGH TERRAIN MOBILE CRANES

FORKLIFT, GENIE LIFT & MATERIAL HANDLING

(2) GROVE RT 522, 22 TON, 4 WD, (4) OUTRIGGERS, HOIST, BOOM, S/N’S 49986, 49982

TRUCKS, CARS & UTILITY VEHICLES

BOATS

2007 FORD F-550FB, 2007 CHEVY SILVERADO, 2001 CHEVY VENTURE, 2001 MERCURY SABLE, 2004 GMC SIERRA 1500, 1990 FORD CRANE TRUCK, 2001 CHEVY SILVERADO 2500, 2001 CHEVY SILVERADO 1500, 2011 FORD FLEX, 2007 CHEVY TRAILERBLAZER, 2001 CHEVY 1500, 1992 CHEVY UTILITY TRUCK AND MORE! NOTE: CHECK ONLINE CATALOG FOR MILEAGE & VIN NUMBERS FOR EACH VEHICLEKAWASAKI MULE 3000’SCUSHMAN MAINTENANCE CARTS

BOSTON WHALER, MODEL BW1707HD78715’, (2) MERCURY 115 MOTORS, CA TAG: CF-8058-JSMUNSON, 21’, MODEL ALF00738G393, CA TAG: 1AX5194

22 TON CAPACITY 1 OF 2

20112007

NEW MOTORS

IF YOU OR SOMEONE YOU KNOW WOULD LIKE TO HAVE AN AUCTION SALE, CALL US AT: 818.264.4232. WE OFFER THE BEST FINDER’S FEE IN THE BUSINESS.

INSPECTION AND AUCTION DAY REQUIREMENTS FOR ALL IN ATTENDANCE: NO OPEN TOE SHOES, NO SHORTS, NO CHILDREN UNDER 18 YEARS OLD, HARD HATS AND SAFETY GLASSES REQUIRED DURING INSPECTION PERIOD. DRIVER’S LICENSE OR PHOTO ID REQUIRED.

PUBLIC WEBCAST AUCTIONPUBLIC WEBCAST AUCTIONBID ONSITE OR BID ONLINE

NATURAL GAS POWER PLANT NATURAL GAS POWER PLANT 3-DAY AUCTION: WEDNESDAY, JUNE 5, THURSDAY,

JUNE 6 & FRIDAY, JUNE 7 AT 9:00 AM PDT INSPECTION: MONDAY, JUNE 3 & TUESDAY, JUNE 4 FROM 9:00 AM PDT TO 3:00 PM PDT

LOCATION: 696 W. 10TH STREET, PITTSBURG, CA

3-DAY

22 TON CAPACITY 1 OF 2