KLARCO s.r.l. Sede legale: Via Masieres n.7 Zona Industriale, 33080 San Quirino PN - ITALIA

Codice Fiscale e n. iscriz. Reg. Imprese di Pordenone: 01802130235 - Partita IVA/V.A.T. Nr.: IT-01230780932

R.E.A.: Pordenone n. 51190 - Capitale sociale: Euro 312.000 i.v.

2E.3026.48.xxspecial execution

Pre-Rinse Unit EUROP on bench-mount Biforo MIX mixing faucet

All contents Copyright (c) 2001-2009 KLARCO s.r.l. - All rights reserved.All photographs/drawings/information herein contained are the exclusive property of KLARCO s.r.l. and can only be reproduced/published with the express written consent of

KLARCO s.r.l. Publication is never allowed for purposes other than commercial promotion and/or technical support of KLARCO products.KLARCO retains the right to modify withour prior notice any information, technical and/or commercial, incl. Art. numbers, drawings, pictues and other technical data contained

in this data sheet.

Special execution:

Metallic Lever in chrome-plated brass L. 20cm

Galvanic Treatment: Chrome 3 (trivalent)

Water-Output: Spout: 26 L/Min. - Spray Gun: 16 l/min.Fixing Holes on the table: Gؾ”: Min. Ø27 mm. Max. Ø30 mm.

Gؽ”: Min. Ø21 mm. Max. Ø25 mm.

Risers h. 150mmؽ” or ؾ” Shafts L. 80 mm with non-return valves.Centers distance L. 155 mm.

Heavy Duty ceramic catridge Ø47, limescale resistant

Casting spout L. 270 mm.

Sanitary lever in fiberglass-enriched PA6.PAHs Free (Policyclic Aromatic Hydrocarbons) and high-elasticity reinforced nylon. Material and design of the lever makes it light, yet virtually unbreakable.

Material PAHs free(Policyclic Aromatic Hydrocarbons. It has recently been found that PAHs can be carcinogenic in case of prolonged skin contact).PAHs testing is compulsory for GS Standard

Switch with ½”ceramic valve

Spring in harmonic steel with grey rilsan coating to make the spring stainless, anti-rust, hygienic and non-scratch (PA11 Rilsan®)

The original “NEW” Spray-Gun made by KLARCO:Return statistics of faulty units: 0,01%Internal Components and Water-Passages made of stainless steel, easy to be replaced and maintenance friendlyWater hammer-proofAdjustable Water-OutputHold ring for continuous water flowThermoisolated handleJet Breaker made of Hostaform (anti-limestone)Anti-drop and anti-leak device when closed

Stainless steel riser pipe

Spring support, wall bracket and spray-gun hook in brass chrome-plated, with internal nylon inserts (anti-rust).Pierced spring support to help drain.Shortenable wall-bracket L. 115 mm. Fixing nuts

Protection-ring to minimize hose friction

Heavy Duty spiral wound Stainless steel flexible hose