8/9/2019 27b. Selectra Pro Xs

1/2

Specifcations

THROUGHPUT

Up to 75 tests per hour.

REAGENT AND SAMPLE SYSTEM

One rotor combining both sample

and reagent positions;

Positions for 10 ml, 25 ml and 50 ml

reagent bottles;

Inner rotor ring:

- 15 positions for reagent bottles;

- Optionally cooled to approximately

10C;

Outer rotor ring:

- 25 positions for (STAT) samples,

controls and calibrators;

- 15 positions for reagent bottles at

ambient temperature;

All reagent positions can be

assigned as R1, R2 and R3;

One needle with level detection,collision protection and integrated

mixer;

All sample positions can contain

13 mm primary tubes or sample

cups.

SAMPLE PREDILUTION

Programm able ratios 1:5 up

to 1:100 in one step increments

with 3 possible diluents:

PIPETTING SYSTEM

1000 l Reagent syringe:

- R1 volume 110 - 400l;

- R2 volume 0 - 180 l;

- R3 volume 0 - 180 l;

- Programmable in 1l steps;

100 l Sample syringe;

- Sample volume 1-30l;

- Programmable in 0.1l steps.

CUVETTE ROTOR

Disposab le cuvette rotor with

48 cuvettes;

Path length 7 mm;

Minimum measuring volume 220 l ;

Measuring temperature 37C,

controlled by Peltier elements.

LIGHT SOURCE

Quartz-iodine lamp 12V-20W.

WAVELENGTH RANGE

340 - 800 mm;

Optical unit with 8 position filter

wheel;

Automatic wavelength selection

340, 405,505, 546, 578, 620 600nm

standard installed;

One free position;

Other wavelenghts available onrequest.

PHOTOMETRIC RANGE

-0.1 to 3.0 Absorbance;

Resolution 0,001 Abs.

ANALYTICAL MODES (SINGLE,

DUAL AND TRIPLE REAGENT

SYSTEM)

Kinetic measuremen t with linearity

check;

Mono- and bichromatic end point

measurementwith or without

bichromatic reagent blank and/or

sample blank correction;

Two point measurement; with or

without slope blank;

Graphic plot of all measuring points;

Automatic rerun with sample

reduction;

Non-linear calibration curves;

Prozone check for immunology tests;

Cut-off declaration;

Calculated tests.

QUALITY CONTROL

Up to 15 different controls can be

defined, 3 per test;

Westgard rules;

Levey-Jennings plots;

Quality control statistics.

WATER CONSUMPTION

~25 0 mL per hour.

STANDARDS

CE-IVD;

CB.

DIMENSIONS (BENCH TOP)

89 x 58 x 60 cm (W x H x D);

No peripherals;

Weight: 67 kg.

INTERFACE Instrument: RS232;

Host: RS232 or Etherhet (TCP/IP)

through LIS-2A protocol.

OPTIONS

BAR CODE READER

Hand held CCD bar code reader

(can read all common bar codes)

used for test requisition, sample

and reagent identification.

PRINTER

Printer supported by

MS Windows.

PC

State of the art Pentium or

equivalent;

Operating System:

MS Windows X P.

Part.nr: 0200-008-02.

Content of this document is subject to change.

ELITech Clinical Systems, the integrated opportunity for clinical laboratories.

The acquisition of Vital Scientific in 2007 and the established presence of Seppim

in the ELITech Group enable the combination of broad manufacturing abilities in

clinical chemistry. ELITech is now moving towards a system offering and providing

the worldwide clinical chemistry market with a unique platform. ELITech Clinical

Systems connects and reinforces the perfect fit between the Groups analyzer

family and complete range of ready-to-use reagents.

Building on the benefits and the strong reputation of proven quality and superior

results, these systems are backed up by vendor and distributor services that are

focused on your kind of laboratory. Welcome to ELITech Clinical Systems the

unique platform optimizing your laboratory operations and allowing end users tofocus on patient outcomes and patient satisfaction.

About Vital Scientific

With over 50 years experience in the design and manufacture of award winning

scientific and laboratory instrumentation, Vital Scientific has the proven expertise

and know-how to respond to your needs. Skilled employees, powerful design

tools, precision engineering and a po licy for top quality components lie at the very

heart of our good manufacturing practices.

By accepting nothing but the very best, Vital Scientific - an ISO 9001 compliant

and FDA registered company - is well equipped to meet the highest standards.

Over the past decades, Vital Scientific has established a solid distribution network

that operates world-wide. More than twenty thousand customers have already

experienced the quality, convenience and reliability of our instruments. Local support

is guaranteed by dedicated and well trained sales and service organisations.

About ELITech Clinical Systems

P.O. Box 100

6950 AC Dieren

The Netherlands

Telephone + 31 313 430 500

Fax + 31 313 427 807

www.vitalscientific.com

info@vital.nl

Vital Scientific BV an ELITech Group company

Distributor details:

8/9/2019 27b. Selectra Pro Xs

2/2

The ELITech Clinical System Selectra ProXS builds on

the benefits, functionality and the robust reputation of

the Selectra Family.

The Selectra ProXS is a versatile system that functions

hassle-free in any laboratory environment to get the job

done right every time and on time! Fast with increased

reportable result efficiency, the Selectra ProXS is the

ideal bench-top for every laboratory as a primary,

STAT or b ack-up system. Compact, reliable and easy-

to-use, the Selectra ProXS will help you optimize your

laboratory operations for more value-added tasks and

improve patient outcomes and patient satisfaction.

It is a true cost-effective solution requiring minimal

maintenance and efficient use of consumables. Overall

costs will be more predictable and youll get greater

value for your investment!

Introduction

With the Selectra ProXS your return on investmentis guaranteed:

Limited training involved;

Low maintenance required;

Robust system; minimal productivity issues;

Efcient reagent usage;

Low water consumption;

Short result turnaround time.

Results you can trust every time and on time!

You name it, the Selectra ProXS does it

Extensive test menu covers a full range of assays and almost

every application in a convenient and flexible manner. Low

volumes, low concentrations, turbidimetrics the superior

optical design of the Selectra ProXS offers you the predictable

results and costs you need.

The Selectra ProXS also features optimized results with

ELITech Clinical Systems liquid stable ready-to-use reagents;

the perfect match for the Selectra Pro series. Reagents are

bar-coded for easy operation and programming.

System overview

ELITech Clinical Systems Reagents

Sampling Needle with integrated mixer and

level sensing

Disposable cuvettes; no cross contamination

Bar code reader: Test requisition, sample and

reagent identification

Sample of Test Menu

Enzymes ALT, AST, ALP, LDH, -GT

Amylase, CK-NAC, CK-MB

Substrates Albumin, Uric, Acid, Bilirubin Total,

Bilirubin Direct, Cholesterol,

HDL Cholesterol, LDL Cholesterol,

Creatinine, Glucose, Total Protein,

Microprotein, Triglycerides,

Urea UV

Specific proteins CRP, APO A1, APO B, Microalbumin,

Transferrin, IGA, IGG, IGM,

Prealbumin, Haptoglobin,

Orosomucoid

Electrolytes Calcium, Chloride, Magnesium,

Iron, Phosphorus

Other HbA1C