26168 RS 24pp Maintenance Solutions Brochure AU Mayimg-asia.electrocomponents.com/apac/pdf/anz/201705_maintenance... · KEYSIGHT DSO1000B SERIES ... FX-888D $212.00 HAKKO FX-888D

24 MAINTENANCE SOLUTIONS24 MAINTENANCE SOLUTIONS

123-2011 Raspberry Pi Compute module 3 (Each) Compute Module 3 $42.42

123-2012 Raspberry Pi Compute module 3 Lite (Each) Compute Module 3 Lite $34.85

123-2013 Raspberry Pi 3 compute module I/O (Each) Compute module 3 I/O $186.58

127-0226 Raspberry Pi Compute Module 3 Development Kit

CM3 Dev Kit $244.86

RASPBERRY PI COMPUTE MODULES 3• The Raspberry Compute Modules 3 are suitable

for designers who are happy with Raspberry Pi3 functionality but require a smaller form factor (67.6 mm x 31 mm) for their embedded designs

NA

896-8119 Raspberry Pi 3 Starter Kit (Each) Raspberry Pi 3 Starter Kit

$156.82

RASPBERRY PI 3 STARTER KIT• With this kit, you’ll be exploring, programming

and experimenting with a Raspberry Pi within just a few minutes

• This Official Raspberry Pi 3 Starter Kit has everything you need - Just plug in the cables, attach to your TV or monitor and turn on

NA

913-9999 Genuino 101 (Each) Genuino 101 $59.04

GENUINO 101 BOARD POWERED BY INTEL• The Genuino 101 Development Board powered by Intel,

and developed by Arduino and Intel®, is an educational tool for beginners to electronics and programming

• Featured extra functionality, Bluetooth Low energy (BLE), six-axis accelerometer and gyroscope

NA

715-4084 Arduino Mega (Each) A000067 $80.53

ARDUINO MEGA DEVELOPMENT BOARD• The Mega Development Board from Arduino is an

open-source development platform that uses an AVR ATmega 2560 microcontroller at its core. To get started, connect your Mega to a computer using a USB cable

NA

761-7355 Arduino Starter Kit with UNO board (Each) K000007 $123.95

ARDUINO UNO STARTER KITS• The Arduino Starter Kits use the Arduino Uno

as a main board, with the board featuring an AVR ATmega 328 microcontroller

NA

782-4581 Arduino Robot (Each) A009078 $309.62

ARDUINO ROBOT WITH ATMEGA32U4• The Arduino Robot is a great, fun platform for you

to learn about robotics. Made to be flexible for all levels of experience, the robot consists of two boards: a control board (with a variety of on-board sensors) — ideal for beginners to programming, and a motor board — for the more experienced programmer.

NA

For up to date pricing & offers visit au.rs-online.com today!

EVALUATION KITS

au.rs-online.com

MAINTENANCE SOLUTIONSNext day delivery on 60,000+ locally stocked products suitable for all your Maintenance needs. Free delivery for orders placed online, no minimum spend.

May - July 2017

All products sold in this publication are subject to the terms and conditions of sale set out at au.rs-online.com. Prices are valid at the time of print, but may be changed by RS at any time, and exclude GST which will be charged at the current rate. For full Terms & Conditions visit RS Online.

758-0890 50Mhz, 2Ch, 1GSa/s (Each) DSO1052B $737.00

758-0893 70MHz, 2Ch, 1GSa/s (Each) DSO1072B $1,200.00



KEYSIGHT DSO1000B SERIES OSCILLOSCOPES• Wide viewing angle and bright LCD colour display (300cd/m2)• Simultaneous viewing of main and zoomed waveforms• 25% more viewing area with menus switched off

NA

125-4013 Self-leveling 2-line laser level (Each) Fluke-180LR $525.00

NEW FLUKE 180LR CROSS LINE LASER LEVEL• Bright, crisp plumb and level lines across a 180-degree field of view • Accurate to 3 mm at 10 metres• Fluke rugged design withstands 1 metre drop-test

NA

780-4852 26V, +200°C to +480°C (Each) FX-888D $212.00

HAKKO FX-888D SOLDERING STATION• ESD safe• Small footprint• Simple and easy operation

NA

509-9443 4 Piece, E6-E24 (Each) KE004-YBIJ $62.00

GEARWRENCH RATCHETING E-TORX WRENCH SET• The thin head and shank design allows GearWrench™

external Torx® into spaces a ratchet and socket will not go• Overall size of box end comparable

to standard Torx® wrench• All metal construction with a full mirror finish

NA


FLUKE INDUSTRIAL TESTING EQUIPMENT

MAINTENANCE SOLUTIONS 3

744-2527 HART, Documenting Process Calibrator FLUKE 754 $9,850.00

FLUKE 754 DOCUMENTING PROCESS CALIBRATOR-HART® • Source/simulate volts, mA, thermocouples, RTDs,

frequency, ohms, and pressure to calibrate transmitters• Powerful built in HART interface capable to

perform nearly all the day-to-day tasks • Easy-to-follow, menu-driven display which guides users through tasks

NA

287-642 Fluke 771 (Each) FLUKE 771 $995.00

669-3490 Fluke 772 (Each) FLUKE 772 $1,295.00

669-3493 Fluke 773 (Each) FLUKE 773 $1,895.00

FLUKE 771/772/773 MILLIAMP PROCESS CLAMP METERS • Measure mA signals for PLC and control system analog I/O• Measure 4 to 20 mA output signals from Transmitters without breaking the loop • Best in class 0.2 % accuracy

NA

331-7452 Fluke 725 (Each) FLUKE 725US $3,950.00

FLUKE 725 MULTIFUNCTION PROCESS CALIBRATOR • Rugged, streamlined shape, reliable design stands up to field use• Easy to read measure/source screen lets you view input and output simultaneously• Measure volts, mA, RTDs, thermocouples, frequency,

and ohms to test sensors and transmitters

NA

905-5920 Fluke 1587 FC (Each) FLUKE 1587 FC $1,373.00

905-5927 Fluke 1587/I400 FC Multimeter & Clamp (Each) FLUKE 1587 FC I400 $1,492.00

FLUKE 1587 FC INSULATION MULTIMETER • PI/DAR measurements with TrendIt™ graphs• Memory storage through Fluke Connect® Measurements app• Temperature compensation through Fluke Connect Measurements app

NA

134-7345 787B (Each) FLUKE 787B $1,350.00

447-7707 789 (Each) FLUKE 789 $1,500.00

NEW FLUKE 787B/789 CURRENT LOOP CALIBRATORS • Precision 1000V, 440mA digital Multimeter measures AC and

DC volts, and current, resistance, continuity and frequency• DC mA current source / loop calibrator / 20mA current

source/ simulator / % of scale readout• True RMS AC voltage measurement

NA

111-5341 Fluke 279 FC IFLEX (Each) FLUKE 279 FC IFLEX $1,435.00

FLUKE 279 FC THERMAL MULTIMETER WITH iFlex® • Full-featured digital multimeter with integrated thermal camera • Expanded measurement capabilities with iFlex® (up to 2500 A AC)• Memory storage through Fluke Connect® measurements app

NA


IDEC MACHINE GUARDING AND SAFETY

4 MAINTENANCE SOLUTIONS

813-5053 240Vac (Each) RJ2S-CL-A240 $15.69

813-5069 24Vdc (Each) RJ2S-CL-D24 $12.84

813-5044 24Vac (Each) RJ2S-CL-A24 $12.84

813-5050 12Vdc (Each) RJ2S-CL-D12 $5.14

RJ SERIES DPDT PLUG IN NON-LATCHING RELAYS• Blade model has optional green, non-polarised LED• RoHS compliant• 1 or 2 pole versions available

NA

813-5022 240Vac (Each) RJ1S-CL-A240 $14.89

813-5038 24Vdc (Each) RJ1S-CL-D24 $10.99

813-5028 24Vac (Each) RJ1S-CL-A24 $10.99

813-5034 12Vdc (Each) RJ1S-CL-D12 $10.99

RJ SERIES SPDT PLUG IN NON-LATCHING RELAYS• RJ series plug-in relays with LED• Operating temperature: -40 ºC to 70 ºC• DIN rail mount sockets available

NA

780-5629 2NO-1NC, LED, 5m (Each) HS7A-DMP7015 $171.05

HS7A-DMP NON-CONTACT SAFETY SWITCH• Designed to be used in applications where non -contact

is desired between the switch and its actuating key• The HS7A-DMC can also be used where space is at

a premium thanks to its slim profile, 25x88x13mm• Auxiliary contacts enable PLCs to monitor the door status

NA

832-6142 1NC (Each) HW1B-V4F01-R $46.09

HW SERIES EMERGENCY STOP• IP65• Twist to Reset• Red 40mm Round Head

NA

813-5141 1NO, Green (Each) YW1B-M1E10G $23.86

813-5151 1NO, Yellow (Each) YW1B-M1E10Y $22.72

813-5145 1NO, Red (Each) YW1B-M1E10R $23.86

YW SERIES 22MM MOMENTARY FLUSH PUSH BUTTONS• Self-cleaning contacts• Innovative plastic locking lever• Compact and light-weight

NA

812-9809 48 I/O Source O/P, 24Vdc (Each) FT1A-B48SA $275.00

SMARTAXIS LITE 48 I/O PLC CPU• Compatible with IDEC's WindLDR programming software• Supports Modbus TCP and RTU• Mini USB type B port for programming

NA


CLIPSAL POWER CONNECTORS


443-4306 10A, 250V (Each) 56P310 $43.05

443-1177 15A, 250V (Each) 56P315 $54.60

IP66 INDUSTRIAL PLUGS • 20 mm thread• 3 flat pins• 1.5 - 6 mm2 conductor terminal

NA

443-4261 250V, 10A (Each) 56C310 $120.75

443-1155 250V, 15A (Each) 56C315 $139.65

IP66 INDUSTRIAL SWITCH SOCKET OUTLETS • 10 A thermal current• 2 module Model• 3 Flat pins

NA

818-7704 500V, 20A, 4 pin (Each) 56P420-EO $126.79

818-7708 500V, 32A, 4 pin (Each) 56P432-EO $182.91

56 SERIES INDUSTRIAL POWER CONNECTOR PLUGS • IP66 Rated• Round pins• UV Stabilised rigid polycarbonate casing

NA

443-1199 20A, 500V, IP66 (Each) 56PA520 $161.70

443-1206 32A, 500V, IP66 (Each) 56PA532 $221.55

IP66 INDUSTRIAL ANGLED POWER PLUGS • 5 round pins• 2.5 - 10 mm2 conductor terminal• M150 motor rating

NA

867-4573 5 Pin, 500V, 32A (Each) 56CSC532-EO $355.24

56 SERIES INDUSTRIAL POWER CONNECTOR SOCKET • IP66 Rated• 250-500 Volts rating• M100 motor rating

NA

863-7877 250V, 10A (Each) 56SO310A-GY $135.96

FLAT PIN SURFACE SOCKET OUTLETS • Made from tough polyester for robust housing• IP66 Rating• Extra Low Voltage and 3 phase sockets

NA


FESTO PNEUMATIC COMPONENTS


121-5658 0.3 to 4 bar (Each) MS4-LR-1/4-D5-AS $87.38



MS-LR SERIES PRESSURE REGULATORS • Available with and without secondary venting• High flow rate with minimal pressure drop• Regulator lock

NA

121-4316 Manual Drain, G¼" (Each) MS4-LFR-1/4-D6-CRM-AS $135.83

121-5650 Auto Drain, G¼" (Each) MS4-LFR-1/4-D6-CRV-AS $199.58

MS-LFR SERIES FILTER REGULATORS • A combined pressure regulator and filter from Festo• Removes contaminates from compressed

air down to a particle size of 5 µm or 40 µm (dependent on filter cartridge)

• Available in pressure ranges 0.3 bar to 7 bar

NA

121-4315 8 bar max, G¼" (Each) MFH-5-1/4 $293.80

121-5646 8 bar max, G1/8" (Each) MFH-5-1/8 $257.05

MFH SERIES SOLENOID VALVES • Maximum operating pressure of 8 bar• 5/2 way valves• Durable poppet valves

NA

121-6280 4mm OD x 50m (Bag of 50mtrs) PUN-4X0,75-BL $101.00

121-6283 6mm OD x 50m (Bag of 50mtrs) PUN-6X1-BL $147.00

122-8455 8mm OD x 50m (Bag of 50mtrs) PUN-8X1,25-BL $213.50

PUN SERIES POLYURETHANE TUBING • Highly flexible plastic tubing• Fits a variant of fittings• Compressed air in accordance with ISO 8573¬1:2010

NA

121-5256 Self-adjusting cushioning (Each) DSBC-32-50-PPSA-N3 $201.81

121-5257 Manually adjustable cushioning (Each) DSBC-32-50-PPVA-N3 $206.85

DSBC SERIES PROFILE CYLINDERS • 32mm Bore, 50mm Stroke• Stainless steel piston rod• Wide range of variants

NA

121-6192 Elbow (Pack of 10) QSL-1/4-8 $80.90

121-4318 Straight (Pack of 10) QS-1/4-8 $54.00

THREADED-TO-TUBE ADAPTERS • A high quality range of threaded tube adapters• R¼ male to 8mm tube

NA


UVEX PPE


262-6064 Lens Cleaning station (Each) 1008 $5.12

SPECTACLE CLEANING STATION• Wall mounted lens cleaning station• Four boxes of 500 non-abrasive absorbent tissues• Mirror, mounting screws and adhesive stickers

NA

768-9170 P2 with valve (Pack of 15) 8732-218 $30.19

DISPOSABLE VALVED RESPIRATOR,• Optimised shape for high wearing comfort• Flexible, adjustable nose piece• Textile headband for comfort fit

NA

552-942 Ear defender (Each) UVEX-3 $46.08

31DB EAR DEFENDER AND HEADBAND• 31dB Standard Noise Reduction • Foldable Earmuff with Steel Suspension Headband System • Medium Noise Areas

NA

262-5538 Clear (Each) 9161-325 $13.65

SAFETY SPECTACLES• Designed to cover prescription spectacles• Clear high-impact polycarbonate lens

with scratch-resistant coating• Four position adjustable side-arms

NA

CLEAR ACETATE ANTI-MIST VENTED SAFETY GOGGLES• Full vision safety goggle with unrestricted side

visibility provided by 180° panorama lens• Fits over most prescription spectacles• Anatomical shape and soft

material allow close, yet comfortable, fit

262-6610 Ultravision (Each) 9301-624 $22.16

NA

768-9152 Unattached (Box of 200) XF-PB $52.08

XF DISPOSABLE EARPLUGS FOR DISPENSERS• Ergonomic shape and low expansion

pressure for comfortable fitting • Pressure build up on outer ear canal reduced

due to patented x-recess• Unique comfort maximises wearer comfort NA


B&R ENCLOSURES


885-2629 220 x 150 x 100 (Each) PJ221510T $67.50

885-2638 300 x 220 x 75 (Each) PJ302207T $109.20

885-2641 300 x 220 x 100 (Each) PJ302210T $110.46

885-2648 300 x 220 x 150 (Each) PJ302215T $138.08

POLYNOVA PJ SERIES IP55 ENCLOSURES• Opaque parts manufactured from noryl, a

thermoplastic self-extinguishing material, transparent parts made from polycarbonate

• Surface finish is light grey (RAL 7035)• Stainless steel cover screws

NA

885-2559 110 x 75 x 65 (Each) PJ110706 $12.60

885-2578 150 x 110 x 75 (Each) PJ151107 $18.38

885-2600 150 x 150 x 150 (Each) PJ151515 $46.41

885-2610 220 x 150 x 100 (Each) PJ221510 $48.30

POLYNOVA PJ SERIES IP55 ENCLOSURES• Stainless steel cover screws• UV stabilised• IP55 protection rating

NA

885-2764 300 x 200 x 150 (Each) NI03021/S $673.37

885-2773 400 x 300 x 150 (Each) NI04031/S $808.92

885-2783 400 x 400 x 200 (Each) NI04042/S $950.36

885-2830 600 x 400 x 300 (Each) NI06043/S $1,920.24

UNIVERSAL NI SERIES STAINLESS STEEL IP66 WALL BOXES• IP66 protection rating• Flexible equipment mounting options• Specially designed gutter system

NA

885-2979 150 x 150 x 80 (Each) TE1108 $117.18

885-2985 200 x 200 x 120 (Each) TE2212 $146.69

CONNECTOR TE SERIES IP66 ENCLOSURES• IP66 protection rating• Fully welded construction• Captive 316 stainless steel combo head screws,

used to prevent loss when fastening

NA

885-2758 7mm Square (Each) NI020/S $108.78

STAINLESS STEEL TURNBUCKLE LOCK• Turnbuckle lock in stainless steel with

7mm square stainless steel insert

NA

885-2739 800 x 600 x 300 (Each) FR080630 $728.40

FORTE FR SERIES IP65 ENCLOSURE• IP65 protection rating• 110° door opening for ease of access• 2 mm steel mounting pan

NA


HAKKO SOLDERING & DESOLDERING TOOLS


517-5783 24Vac Iron (Each) FX951 $492.00

FX-951 DIGITAL SOLDERING STATION• Digital soldering station with space

saving vertical design housing• Ideally suited to lead free soldering processes• Temp range 200°C to 450°C

NA

768-8985 50W, 240V (Each) FX600-14 $93.85

FX600 SOLDERING IRON• Lightweight, ergonomic handpiece• Compact size• Adjustable “electronic” temp control (200°C to 500°C)

NA

517-5812 60W (Each) 503 $23.10

503 ELECTRICAL SOLDERING IRON• Economic, lightweight design soldering irons ideal for use

in a range of light to medium duty repair applications• Spare tips are available

NA

839-6135 240V (Each) FR300-18 $515.00

FR-300 PORTABLE DE-SOLDERING GUN• Quick change nozzle system• Easy temperature selection• 350°C to 500°C

NA

712-6017 22W, 240V (Each) FA-400 Aus/NZ $169.00

FA-400 SMOKE ABSORBER• Revised design bench-top smoke absorber• Compact design, requiring less bench space.• Option of 3 positional settings (upright,

laying down or with arm stand)

NA

488-251 120W (Each) FM204 $1,014.00

FM204 DESOLDERING STATION• Vacuum pump type desoldering station

with soldering capability• Integrated nozzle contains heater and sensor,

providing instant thermal recovery• Selectable grip: detachable

handle allows gun or pencil style grip

NA


POWER SUPPLIES & FANS


667-5584 12V, 5A, 60W (Each) GS60A12-P1J $95.93

667-5509 12V, 1.5A, 18W (Each) GS18A12-P1J $37.95

667-5590 24V, 2.5A, 60W (Each) GS60A24-P1J $95.93

GS SERIES SINGLE OUTPUT SWITCH MODE DESKTOP POWER SUPPLIES• Energy saving, class 1, switch mode,

desktop power supply• High efficiency, long life and high reliability• Input voltage range: 90 264 Vac, 135 370 Vdc

NA

435-914 12V, 4.0A, 48W (Each) $70.42

435-926 24V, 2.0A, 48W (Each) $70.42

435-942 12V, 2.0A, 24W (Each) $40.33

436-024 12V, 1.0A, 12.5W (Each) $25.61

SAW SERIES SINGLE OUTPUT SWITCH MODE DESKTOP POWER SUPPLIES• External switch mode desk-top power supply• SAA approved• Input voltage range: 100 - 240 Vac

NA

843-1708 24V 1.67A 40W (Each) TMDC 40-2415 $115.04

843-1724 12V 5A 60W (Each) TMDC 60-2412 $133.02

843-1733 24V 2.5A 60W (Each) TMDC 60-2415 $135.61

843-1742 24V 2.5A 60W (Each) TMDC 60-4815 $142.39

TMDC 40 SERIES SINGLE OUTPUT ISOLATED DC-DC CONVERTERS• Fully encapsulated low profile plastic case• Ultra wide 4:1 input voltage range• Operating temperature range –40°C to +65°C• Input voltage range: 9- 36 Vdc • I/O isolation : 2500 Vdc

NA

118-3229 119mm 115V 180m³/h (Each) 4600N $62.22

101-8052 119mm 230V 160m³/h (Each) 4650N $50.47

272-0396 119mm 230V 160m³/h (Each) 4656N $57.28

AC BALL AND SLEEVE BEARING AXIAL FANS• Small installation depths, low noise levels

and exceptional efficiencies• Self-starting, industrial frame size fans with

over temperature/current protection• Reverse mountable for blowing or extraction

NA

802-9447 133mm 230V 280m³/h (Each) R3G133-RA01-03 $227.03

810-4131 175mm 24Vdc 565m³/h (Each) R1G175-AB63-59 $332.28

830-3023 190mm 230V 735m³/h (Each) R3G190-RC05-03 $288.46

830-3032 220mm 230V 1015m³/h (Each) R3G220-RC05-03 $348.10

RADICAL EC CENTRIFUGAL FANS• Optimised impeller blade design• EC motor technology• High efficiency: up to 50% less energy

consumption compared to AC solutions

NA

211-9308 240Vac 75m³/h (Each) 3650 $58.88

281-3757 12Vdc 79m³/h (Each) 8412NGH $44.31

281-9991 24Vdc 79m³/h (Each) 8414NGH $44.56

337-3115 12Vdc 84m³/h (Each) 3412N $53.51

EBM-PAPST HIGH PERFORMANCE BALL BEARING FANS• Material: fibreglass-reinforced plastic• Fully integrated electronic commutation• Protected against reverse polarity and locking

NA


LAPP CABLE & CONNECTORS


839-5381 M20 (Pack of 5) 52103320 $5.27

839-5387 M16 (Pack of 5) 52103310 $4.04

839-5390 M25 (Pack of 5) 52103330 $7.60

839-5393 M32 (Pack of 5) 52103340 $9.08

SKINTOP SM-PE CABLE GLAND LOCKNUTS• Cutting edges cut through insulating layer• Optimum EMC contact• Ideal for all metric glands used in

earthing and EMC applications

NA

787-4041 1.5mm (Reel of 50m) 1119325 $835.85

ÖLFLEX® CLASSIC 110 YY CABLE• Operating temperature: -40°C - +185°C• Conductors insulated with special PVC, black

with white numbers + green/yellow earth wire• Special PVC external sleeve, silver-

grey RAL 7001, flame retardant

NA

811-0827 3.5 to 7mm (Reel of 100m) 53111200 $145.94

IP68 METRIC ROUND TOP GLAND• Provides optimal strain relief• Vibration protection• Operating temperature: -40°C +100°C

NA

839-5331 M16 x 1.5 4.5-9mm (Each) 53112620 $7.62

839-5337 PG36 19-32mm (Each) 53112270 $55.06

839-5343 M25-1.5 9-16.5mm (Each) 53112640 $12.30

EMC CABLE GLANDS• 1P68 rating, Operating temperature -30°C - +100°C • Low resistance screen contact• Optimum EMC protection

NA

234-657 9 way (Each) 00008771 $34.81

234-663 12 way (Each) 00008923 $35.17

234-679 16 way (Each) 00008722 $41.20

CABLE MOUNT CONNECTOR SOCKETS• IP65 rating• Suited for applications including mechanical,

measurement and process control• Operating temperature: -40°C - +125°C

NA

531-790 9 way (Each) 00008736 $33.23

531-807 12 way (Each) 00008990 $35.92

531-813 16 way (Each) 00008883 $36.65

CABLE MOUNT CONNECTOR PLUGS• IP65, Operating temperature: -60°C - 125°C• Suited for applications including mechanical,

measurement and process control• Mated connectors offer high water and dust protection

NA


BELDEN INDUSTRIAL CABLES


363-367 0.75mm² 50m (Reel of 50m) CYSB03.0050 $164.10

363-373 1mm² 50m (Reel of 50m) CYSC03.0050 $188.36

363-389 1.5mm² 50m (Reel of 50m) CYSD03.0050 $234.41

369-078 0.75mm² 100m (Reel of 100m) CYSB03.01100 $311.43

CY TYPE CONTROL CABLES• CY Cables are screened flexible cables used as

interconnecting cables for control, regulation and measurement in control equipment

• Applications include: Assembly, production lines, conveyors and computer units

• Temperature rating: Flexing -5°C to +70°C, stable -20°C to +70°C

NA

822-989 30m, 330V (Reel of 30m) 8723.003 $137.63

822-995 304m, 330V (Reel of 304m) 8723.00305 $705.60

823-005 152m, 330V (Reel of 152m) 8723.01152 $413.44

INDIVIDUALLY SHIELDED 2 PAIR INDUSTRIAL CABLE• 2 Pair 22AWG(7x30) stranded tinned copper conductors• Each pair shielded with Beldfoil® aluminium-polyester shield with Zfold® construction• Pairs are cabled on a common axis to reduce outer diameter

NA

382-7000 1 Pair (Reel of 152m) 3105A.00152 $741.50

382-7016 3 Core (Reel of 152m) 3106A 010500 $873.92

RS-485 DATA CABLE• The approved cable for use with HART automated systems• 22AWG paired cables with Datalene® insulation

and an overall Z-fold Beldfoil® shield• Oil and sunlight resistant

NA

382-7218 304m (Reel of 304m) 8760NH.00305 $1,121.37

SINGLE TWISTED PAIR OVERALL SHIELDED CABLE• Single pair polyethylene insulated stranded conductors

with an overall Beldfoil® aluminium-polyester shield• 120.4101 N max. recommended pulling tension• Non-plenum product NA

521-8278 Black 100m (Reel of 100m) MRG5800.10100 $201.16

521-7900 White 100m (Reel of 100m) MRG5800.12100 $191.88

RG58C/U COAXIAL CABLE• 18mm tinned copper stranded conductor• Solid polyethylene insulation• Sheathed in PVC

NA

823-134 0.36 mm² (Reel of 152m) 8771.01152 $336.26

331-9026 0.57 mm² (Reel of 152m) 8772.00U152 $736.21

SHIELDED PVC INDUSTRIAL CABLE• Operating temperature: -20°C to +60°C• Beldfoil® shield, providing excellent

protection from external interference• UL flame test - UL1685 UL Loading

NA


HELLERMANNTYTON CABLE, TIES & TOOLS


441-5535 Crimp & cable tie kit (Each) A801632T $174.52

CRIMP AND CABLE TIE KIT• A total of 630 components - 590 insulated terminals

in 20 popular styles and 40 cable ties• Kit includes 20 of 100x2·5mm and

20 of 200x4·6mm cable ties• Housed in a rugged steel box with drop down handle

NA

219-875 19 x 19mm (Pack of 100) 151-28320 $35.00

219-869 28 x 28mm (Pack of 100) 151-28412 $53.10

BLACK SELF ADHESIVE CABLE TIE BASES• Self adhesive• Quick assembly in clean applications• Allows 4 way entry for cable ties

NA

170-3902 200 x 4.6mm (Pack of 100) 111-05000 $18.51

419-4317 300 x 7.6mm (Pack of 100) 111-12219 $48.26

190-4149 460 x 7.6mm (Pack of 100) 111-12610 $97.05

T SERIES STANDARD BLACK NYLON CABLE TIES• Quick, simple fixing by hand or processing tool• Available in various materials, colours and sizes• Inside serration for a strong hold onto bundles

NA

557-017 Size B 1.7-2.8mm o/d (Each) 518-06253 $192.83

557-023 Size C 2.5-4.8mm o/d (Each) 518-05025 $192.83

HELAGRIP PVC CABLE MARKER KITS• Markers fit a range of cable sizes• Markers can be applied pre-termination• Chevron cut to ensure markers lock together

NA

705-6401 127 x 4.6mm coated (Pack of 100) 111-00288 $232.60

705-6426 362 x 7.9mm coated (Pack of 50) 111-00295 $223.24

MBT SERIES STAINLESS STEEL ROLLER BALL CABLE TIES• Specially designed for industrial applications in aggressive environments• Very good resistance to high temperatures, weather and corrosion • Secure and easy to fit with a patented

non-releasable locking feature NA

719-0797 For RJ45 ports (Pack of 100) (Pack of 100) 854-40246 $59.59

RJ45 DUST COVERS• Protects unused ports on active equipment and patch panels• Fits all RJ45 ports• Easy to insert and remove using innovative swing tab design

NA


RS PRO


123-6435 50MHz, 2 channels (Each) RSDS1052DL+ $544.72

123-6436 70MHz, 2 channels (Each) RSDS1072CML+ $607.93

123-6437 100MHz, 2 channels (Each) RSDS1102CML+ $658.12

RSDS1000CML+/DL+ SERIES DIGITAL STORAGE OSCILLOSCOPES• Choice of 50 MHz,150 MHz, 100 MHz

and 70 MHz bandwidth models• Real-time sampling rate up to 1 GSa/s

(depending on choice of model), equivalent-time sampling rate up to 50 GSa/s

• Memory depth to maximum 2 Mpts (depending on choice of model)

NA

123-6439 70MHz, 4 channels (Each) RSDS1074CFL $1,191.68

123-6441 200MHz, 4 channels (Each) RSDS1204CFL $1,487.28

124-1954 300MHz, 4-channel (Each) IDS-2304A $3,792.55

RSDS1000CFL SERIES DIGITAL STORAGE OSCILLOSCOPES• 7 inch (177.8 mm) colour TFT LCD display• 4 channel models, bandwidth 70 MHz, 100 MHz, 200 MHz

or 300 MHz, depending on choice of model• Single channel real-time sampling rate is 2 GSa/s, equivalent

sampling rate 50 GSa/sNA

123-6454 60MHz, 2 channels (Each) RSHS806 $1,090.12

RSHS800 SERIES HANDHELD DIGITAL OSCILLOSCOPES• Dual-input oscilloscope, multimeter and recorder (including

TrendPlot and waveform) in one instrument• Input voltage through BNC up to CAT II 300V and CAT III 150V• Standard probe 10X CAT II 400 V

NA

744-2209 AAA (Pack of 12) LR03 12S $7.69

744-2199 AA (Pack of 12) LR6 12S $7.47

826-4435 9V (Pack of 15) 9V 15S $49.37

NON-RECHARGEABLE ALKALINE BATTERIES• RS offers a range of non-rechargeable alkaline

batteries, go online to see the range

NA

775-7233 1.5V 158mAh (Pack of 5) LR44 $6.39

COIN CELL BATTERIES• High capacity, non-rechargeable• Wide temperature range• Long storage life and long operational life

NA

826-4432 C Battery (Each, Pack of 15) $23.51

826-4423 D Battery (Each, Pack of 15) $30.86

NON-RECHARGEABLE ALKALINE BATTERIES• Provide the longest service life for high drain devices• Last more than twice as long as heavy duty batteries in certain applications• Refrigerated storage is neither necessary nor recommended

NA


RS PRO


537-883 11 piece (Each) SC6750 $18.27

CASED 11-PIECE COMBINATION SET• Set with nickel plated bodies• Blackened steel shafts• Revolving heads for precise accurate control

NA

459-3972 18 piece (Each) SC0556 $61.27

18 PIECE MECHANICAL SCREWDRIVER SET• 18 piece set containing popular sizes for

mechanical and general purpose environments• Made with durable chrome-molybdenum

and chrome-vanadium steel• Supplied in a blow moulded case

NA

668-5723 45 piece (Each) RET0003 $66.37

45 PIECE PRECISION SCREWDRIVER SET• Built with high quality in mind and made from the

best chrome-molybdenum and chrome-vanadium steel to provide long life and safe service

• The set is supplied in a handy wallet to keep all pieces in one place, secured and dry when not in use

NA

734-8885 88 piece (Each) RBT0199A $229.28

88 PIECE VDE TOOL KIT & ½IN SOCKET SET• A comprehensive VDE tool kit with an additional

Chrome Vanadium ½in socket set supplied in a sturdy protective plastic carry case

NA

833-5919 10 piece (Each) H99-31-E0310

$85.89

10 PIECE PRECISION PLIERS & SCREWDRIVER TOOL MODULE• 6 precision drivers with an ergonomic design and quick turn caps• Phosphated driver tips for corrosion protection,

increased strength and longer tool life• Stainless Steel tweezers for rust and chemical protection

NA

615-9215 8 piece (Each) SB0254 $4.69

8 PIECE SCREWDRIVER BIT SETS• Manufactured from high grade alloy steel• Suitable for use with power tools• ¼inch hex drive 25mm long screwdriver bit sets,

supplied in storage clips. Each set contains eight bits

NA


RS PRO


439-3025 Switch key (Each) $9.48

SWITCH KEY UNIVERSAL WRENCH• The four arms of the tool offer five differing drive

possibilities: 6.5 mm (¼ in) & 8.1 mm (5/16 in) square sockets, 6.4 mm (¼ in) AF hex socket, 9.8 mm triangular socket and 9 mm winged key drive

• Zinc plated finish

NA

184-8033 10 piece, metric (Each) $40.43

10 PIECE COMBINATION SET• Manufactured from high-quality, carbon steel • General purpose, twin ended spanner set• Supplied in compartmental vinyl storage roll

NA

507-1732 170 piece (Each) $253.58

170 PIECE HSS-TIN COATED DRILL SET• Ground flute • Sizes increase in 0.5mm increments• Ideal for general workshop applications

NA

788-7205 310mm x 200mm x 210mm, Hard Bottom (Each) $32.49

HARD BOTTOM ZIPPED TOOL BAG• Constructed from tough, waterproof Polyester• Top opening with zipper• Complete with padded shoulder strap

NA

916-3541 2xC 1.5mm2 Red/Wh (Reel of 100m) $96.21

916-3576 Twin+E 2.5mm2 (Reel of 100m) $262.40

916-3545 2xC 2.5mm2 Red/Blk (Reel of 100m) $129.83

FLAT TPS CABLE• A TPS cable with an easy-tear sheath and

plain annealed copper conductor

NA

916-3591 2C+E 2.5mm2 (Reel of 100m) $294.44

916-3608 2C+E 4mm2 (Reel of 100m) $218.65

2 CORE + EARTH CABLE• A 2 core plus earth cable suitable for use

under low mechanical stresses

NA


CONNECTORS


533-651 Yellow 12 → 10 AWG (Pack of 50) DS-10-12-RS $84.85

533-667 Blue 16 → 14 AWG (Pack of 50) DS-14-16-RS $29.65

533-673 Red 2 → 18 AWG (Pack of 50) DS-18-22-RS $30.60

TE CONNECTIVITY DURASEAL BUTT INSULATED CRIMP TERMINALS• Reliable connections, especially where

environmental sealing is important• Designed for use where water or condensation

may be encountered, or where abrasion or mechanical abuse could be problematic

NA

245-1696 Crimp receptacle, 22 → 18 AWG (Pack of 100) 60838-1 $36.70

245-1703 Crimp receptacle, 18 → 14 AWG (Pack of 100) 42238-2 $12.90

245-1725 Male tab, 22 → 18 AWG (Pack of 100) 61316-1 $65.90

245-1731 Male tab, 18 → 14 AWG (Pack of 100) 42241-2 $15.90

TE CONNECTIVITY FASTIN-FASTON 250 SERIES CRIMP RECEPTACLES & TERMINALS• Designed for quick and efficient connection and reliability• Precise tensile strength and conductivity• Maximum resistance to vibration and corrosion

NA

372-399 Pin contact, 18 - 16 AWG (Pack of 10) 66099-4 $6.77

372-412 Skt contact, 24 - 20 AWG (Pack of 10) 66105-4 $11.70

372-434 Skt contact, 18 - 16 AWG (Pack of 10) 66101-4 $9.43

SERIES 1 GOLD PLATED CONTACTS• A range of Series 1 Contacts for TE

Connectivity connectors

NA

724-2560 Double Header 24 pin (Each) DTM13-12PA-12PB-R008 $56.46

724-2563 Single Header 12 pin (Each) DTM13-12PA-R008 $31.80

DEUTSCH DTM SERIES PCB CONNECTORS HEADERS• Rugged thermoplastic connector housing• Operating temp range -55 to +125 deg c• Tin plated copper alloy contacts

NA

425-761 Pin, Crimp Size 16, 20 → 16 AWG (Pack of 10) 0460-202-16141 $11.75

425-800 SKT Crimp Size 16, 20 → 16 AWG (Pack of 10) 0462-201-16141 $12.79

425-822 SKT Crimp Size 20, 24 → 20 AWG (Pack of 10) 0462-201-20141 $13.21

425-828 Pin Crimp Size 12, 14 → 12 AWG (Pack of 10) 0460-204-12141 $4.55

V4 CONTACTS AND FILLERS• A range of Solid copper alloy, nickel plate crimp

contacts to suit the Deutsch DT, HDP20, HD10 and HD30 ranges of sealed connectors

• Common Contact System• Sockets have Stainless Steel sleeve protection

NA

452-489 White, 0.5 mm² wire (Pack of 500) H0,5/14T W BD -9021930000 $62.41

452-495 Blue, 0.75 mm² wire (Pack of 500) H10,0/22D B -9021940000 $40.39

WEIDMULLER INSULATED CRIMP BOOTLACE FERRULE STRIPS• Each pack of ferrules contain 10 strips of 50,

which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped and terminated

NA


CONNECTORS


475-937 Aluminium, Size 10 (Each) 97-3057-1004-1 $16.56

475-943 Zinc, Size 14 (Each) 97-3057-1007-1 $9.78

475-959 Zinc, Size 18 (Each) 97-3057-1010-1 $14.87

475-965 Aluminium, Size 20 (Each) 97-3057-1012-1 $10.34

AMPHENOL MS SERIES STRAIGHT CABLE CLAMPS• These olive drab backshell cable clamps are suitable for

use with Amphenol MS series of circular connectors• The clamps are designed for use with jacketed

cable, or wires protected by tubing

NA

240-8428 5P+E cable socket, 21A (Each) C016-20E005-1032 $51.74

240-8434 5P+E chassis mount plug, 21A (Each) C016-20C005-1002 $18.85

240-8440 5P+E chassis mount socket, 21A (Each) C016-20G005-1002 $34.68

240-8456 12P+E cable plug, 3way(21A)+9(11A) (Each) C016-10I012-0032 $27.99

AMPHENOL C16-3 SERIES CABLE AND PANEL MOUNT PLUGS AND SOCKETS• From Amphenol, this C16-3 Series circular

connectors are versatile and reliable, mating easily with corresponding C16-3 Series receptacles

NA

290-6613 Plug (Each) 932916206 $21.56

290-6629 Socket (Each) 508733 $10.37

HIRSCHMANN M12 CHASSIS PLUG & SOCKET• Front panel mounting plugs and sockets with a

PG9 thread to enable the coupling of jumper cables and single ended leads to appliances

• IP67 Rating• Cable Type PVC

NA

483-893 2 way Cable plug (Each) PX0736/P $20.83

483-900 2 way Inline cable coupler skt (Each) PX0737/S $20.88

483-922 3 way Cable plug (Each) PX0731/P $17.23

483-938 3 way Inline cable coupler skt,10A (Each) PX0732/S $22.46

IP68 BULGIN BUCCANEER SERIES CABLE PLUGS AND SOCKETS• Cable gland to provide sealing• Diameter 38mm, length 69mm• Connect to in-line or chassis sockets or plugs

NA

540-1694 6 + PE Pole Cable Mount Connector Plug (Each) C016 30H006 110 10 $19.51

540-1717 6 + PE Pole Cable Mount Connector Plug (Each) C01610H00600010 $13.44

395-430 3P + E Pole Cable Mount Connector Plug (Each) C016 20H003 110 12 $18.79

395-440 3 + PE Pole Cable Mount Connector Socket (Each) C016 20D003 110 12 $19.62

IP65/67 ECO-MATE SERIES 6 + PE CABLE CONNECTORS• Strain relief and seal in a single element• Ergonomically shaped handle for a better grip and safer handling• Possibility of fastening the protective cover

to the housing with a clamping ringNA

181-0943 6P+E pin insert, 35A 250/690V (Each) 9310062601 $53.04

181-0959 6P+E socket insert, 35A 250/690V (Each) 9310062701 $54.23



HAN® HSB SERIES SCREW INSERTS• Inserts are selected according to the desired

number of poles and voltage and current ratings• Slim construction• Poles: 3-16 (screw connection)

NA


CRIMP TOOLS & HAND TOOLS


453-331 0.5 - 6 mm² (Each) 9011680000 $249.96

452-473 0.5 - 2.5 mm² (Each) 9021920000 $269.25

RATCHET BOOTLACE FERRULE CRIMP TOOL• Crimping tool for wire-end ferrules• Automatic feeding ferrules• Side cable entry

NA

501-083 16 - 24 AWG (Each) 63819-0900 $418.84

MOLEX HAND CRIMPING TOOLS FOR MINI-FIT JR CRIMP TERMINALS• Ratchet mechanism ensures full crimping cycle• Ratchet release mechanism in case

of jamming or miscrimps• Terminal locator wire stop for accurate crimp

positioning, suitable for crimping Mini-Fit and crimp terminals

NA

162-5723 Type III + contacts extraction tool (Each) 305183 $24.48

EXTRACT TOOL TYPE 2 20-16• Insertion/Extraction tools for a variety of contacts• Suitable for CPC and M series

NA

313-6607 0.5 - 2.5 mm² (Each) 9990000021 $399.49

HARTING CRIMPING TOOL• The parallel action crimp tool offers optimal crimp

quality and features a rotating locator• Suitable for Han-Com®, Han D®, Han DD® and Han® E inserts

NA

314-1362 0.35 - 1.5 mm² (Each) 58583-1 $413.57

TE CONNECTIVITY PRO-CRIMPER III SDE HAND CRIMP TOOL• PRO-CRIMPER III commercial grade hand operated crimp

tool for crimping a wide range of terminals and contacts• Suitable for SUPERSEAL series connectors

NA

425-8821 0.25 - 6 mm² (Each) PZ 6/5 -9011460000 $330.92

WEIDMULLER PZ 6//5 CRIMP TOOL• Suitable for crimping wire end ferrules with

or without plastic collars and features a versatile five-profile crimping head

• A release option in case of incorrect operation

NA


ALPHAWIRE CABLE


828-2342 3 core (Reel of 30m) 1898C SL005 $71.46

828-2358 6 core (Reel of 30m) 1898/6C SL005 $135.03

828-2360 8 core (Reel of 30m) 1898/8C SL005 $183.99

18 AWG UNSHIELDED MULTI-CONDUCTOR PVC CABLE 300 V• A multi conductor, industrial cable with

tinned copper conductors, PVC insulation and overall PVC jacket. Designed for various applications including control & processing, communications, instrumentation and audio systems

NA

828-2272 8 core (Reel of 30m) 1178C SL005 $98.64

828-2288 12 core (Reel of 30m) 1181C SL005 $222.79

828-2281 15 core (Reel of 30m) 1181/15C SL005 $173.02

828-2285 20 core (Reel of 30m) 1181/20C SL005 $458.56

22 AWG UNSHIELDED MULTI-CONDUCTOR PVC CABLE 300 V• A multi conductor, industrial cable with

tinned copper conductors, PVC insulation and overall PVC jacket. Designed for various applications including control & processing, communications, instrumentation and audio systems

NA

177-1185 20 AWG (Reel of 30m) 5856 BK005 $196.55

177-1078 22 AWG (Reel of 30m) 5855/7 BK005 $139.06

177-0968 24 AWG (Reel of 30m) 5854/7 BK005 $97.92

177-0845 26 AWG (Reel of 30m) 5853 BK005 $62.35

UL1213 HIGH TEMPERATURE HOOK-UP WIRE• Excellent chemical properties• High temperature performance, good resistance

to chemicals and solvents• Operating temperature -60°C to+200°C

NA

168-3561 16 AWG (Reel of 304m) 3057 BK001 $609.66

331-749 18 AWG (Reel of 30m) 3055 BK005 $72.55

124-2772 20 AWG (Reel of 304m) 3053 BK001 $344.66

UL1007 HOOK-UP WIRE• Good abrasion resistance, Flame retardant• Low-fray design for easy handling,

stripping, and termination• Operating temperature -40°C to+105°C

NA

383-5900 5.8 dB/100ft @ 100MHz, 28 dB/100ft @ 1GHz (Reel of 30m) 9058AC BK005 $79.84

383-5922 17 dB/100ft @ 400MHz, 28 dB/100ft @ 1GHz (Reel of 30m) 9058C BK005 $255.66

383-5972 8 dB/100ft @ 400MHz, 13 dB/100ft @ 1GHz (Reel of 30m) 9062A BK005 $128.29

BLACK THIN ETHERNET COAXIAL CABLE• Polyethylene dielectric flexible RG58 type coaxial cables• Reel length 30.5m• Operating temperature -20°C to+60°C

NA

331-799 18 AWG (Reel of 30m) 3055 BR005 $61.36

124-3062 24 AWG (Reel of 304m) 3050 BR001 $252.15

UL1007 BROWN HOOK-UP EQUIPMENT WIRE• Good abrasion resistance, Flame retardant• Low-fray design for easy handling, stripping, and termination• Operating temperature -40°C to +105°C

NA

Documents

26168 RS 24pp Maintenance Solutions Brochure AU Mayimg-asia.electrocomponents.com/apac/pdf/anz/201705_maintenance... · KEYSIGHT DSO1000B SERIES ... FX-888D $212.00 HAKKO FX-888D