Embed Size (px)
Citation preview
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience
Please Note:
This document is provided as a dimensional reference and should not be printed as a drilling template unless it can be correctly scaled to 100% by your printer.
ASSA ABLOY Australia Pty Limited 235 Huntingdale Road, Oakleigh Victoria, 3166 Australia
ASSA ABLOY New Zealand Ltd. 6 Armstrong RoadAlbany, North Shore City, 0632New Zealand
2516EMCD & 2516CO SERIESELECTROMECHANICAL HOLD OPEN DOORCLOSERPULL SIDE / ACTIVE LEAF
50590
28297
142 160
47-61
1516
1116
25
2423-37
MOUNTING POSITION FOR2516-180SIL MOUNT BRACKETIF REQUIRED.
and 2 slide rail holes.
DOUBLE DOOR(LEFT HAND DOOR PULL SIDE)
DOUBLE DOORLEFT HAND PULL SIDE
??????
??????
TURN UPSIDE DOWN FOR OVER DOOR MOUNTING
SLIDE ARM FIXING
(LEFT HAND DOOR PULL SIDE)
SLIDE ARM FIXING
LEFT HAND PULL SIDE
ARM HEIGHT ADJUSTMENT
0-14mm
USE THIS TEMPLATE IN CONJUNCTION WITH THE 2516EMCD & 2516CO INSTALLATION INSTRUCTION (SUPPLIED)
STANDARD MOUNTING
X=min 10mm... max 70mm
Preload pinion as shown and assemble arm to pinion.
X
PRE-LOADING OF THE ARM
1
* - Factory default setting
24*69
13
Inactive(closes first)
130 Max OpeningDo not exceed maximum opening angle.To avoid damage to the unit always usedoor stop to limit the hold open angle
Active(closes second)
Active
130 Max OpeningDo not exceed maximum opening angle.To avoid damage to the unit always usedoor stop to limit the hold open angle
MAX 18
STANDARD MOUNTING
33
MIN
74M
IN 45
63 INSERT SPACER BETWEENDOOR CLOSER BODY AND COVER
31
MIN
116 - MA
X 130
