22EN33S_EN

8/13/2019 22EN33S_EN

1/27

www.lg.com

OWNERS MANUAL

LED LCD MONITOR

22EN33S

Please read this manual carefully before operatingyour set and retain it for future reference.

LED LCD MONITOR MODEL

E N GL I S H

8/13/2019 22EN33S_EN

2/27

2

E NG

E N GL I S H

TABLE OF CONTENTS

Contents

3 AsseMBLInG AnD PRePAR-InG3 Unpacking

4 Parts and buttons5 Setting up the Monitor set

5 - Attaching the Stand Base

5 - Detaching the Stand Base

6 - Mounting on a table6 - Using the cable holder

8 - Mounting on a wall

9 UsInG tHe MonItoR set9 Connecting to a PC

9 - D-SUB connection

11 CUstoMIZInG settInGs

12 Customizing Settings12 - Menu Settings

13 - Picture

14 - Color 15 - Display

16 - Others

17 MY KEY Setting18 FUNC. Setting

18 - Picture Mode

19 - SUPER ENERGY SAVING20 - DUAL DISPLAY20 - DUAL WEB

21 - MY KEY Setting

22 tRoUBLesHootInG

24 sPeCIFICAtIons24 22EN33S

25 Preset Modes (Resolution)25 Indicator

26 PRoPeR PostURe26 Proper posture for using the Monitor set.

8/13/2019 22EN33S_EN

3/27

3

E N G

E N GL I S H

ASSEMBLING AND PREPARING

AsseMBLInG AnD PRePARInG

U packi gCheck your product box for the following items. If there are any missing accessories, contact the localdealer where you purchased your product. The illustrations in this manual may differ from the actual productand accessories.

y Do not use any unapproved accessories to ensure the safety and product life span. y Any damages or injuries by using unapproved accessories are not covered by the warranty.

y The accessories supplied with your product may vary depending on the model. y Product specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.

CAUtIon

note

s a d B dy s a d Ba

CD(o r' Ma ual) / Card

D-sUB Cabl

( Depending on the country ) ( Depending on the country )

P r C rd AC-DC Adap r AC-DC Adap r

r

8/13/2019 22EN33S_EN

4/27

4

E NG

E N GL I S H


Par a d bu

P r I dica r y Ligh i g o : tur d y Ligh i g off: tur d ff

Connection panel ( See p.9 )

Button ( See p.11 )

(Power Button)
http://e/%E5%B7%A5%E4%BD%9C%E8%B5%84%E6%96%99/AAAAAAAAAA/IP110576/%E5%88%B6%E4%BD%9C%E6%95%B0%E6%8D%AE/%E5%88%B6%E4%BD%9C%E6%95%B0%E6%8D%AE/Manual/ENG.inddhttp://e/%E5%B7%A5%E4%BD%9C%E8%B5%84%E6%96%99/AAAAAAAAAA/IP110576/%E5%88%B6%E4%BD%9C%E6%95%B0%E6%8D%AE/%E5%88%B6%E4%BD%9C%E6%95%B0%E6%8D%AE/Manual/ENG.inddhttp://e/%E5%B7%A5%E4%BD%9C%E8%B5%84%E6%96%99/AAAAAAAAAA/IP110576/%E5%88%B6%E4%BD%9C%E6%95%B0%E6%8D%AE/%E5%88%B6%E4%BD%9C%E6%95%B0%E6%8D%AE/Manual/ENG.indd

8/13/2019 22EN33S_EN

5/27

5

E N G

E N GL I S H


Attach the s a d B dy to the monitor set. Attach the s a d Ba .Tighten the screw to the right with a coin.

s i g up h M i r

Attaching the stand Ba e

1 Place the Monitor set with the screen sidedown on a flat and cushioned surface.

Lay a foam mat or soft protective clothon the surface to protect the screen fromdamage.

CAUtIon

2

s a d Ba

s a d B dy

1

2

3

Detaching the stand Ba e

1 Place the Monitor set with the screen sidedown on a flat and cushioned surface.

s a d Ba

s a d Ba

s a d B dy

s a d B dy

Pull out the s a d B dy and s a d Ba from the monitor set.Turn the screw to the left with a coin.Pull out the s a d Ba .

1

2

3

2

8/13/2019 22EN33S_EN

6/27

6

E NG

E N GL I S H


Mounting on a table

1 Lift and tilt the Monitor set into its uprightposition on a table.

Leave a 10 cm (minimum) space from the wallfor proper ventilation.

U ing the cable holder

2 Connect the AC-DC Adapter and Power Cordto a wall outlet.

3 Press (Power) button on the bottom switchpanel to turn the power on.

10 cm

10 cm

10 cm

10 cm

Unplug the power cord before moving theMonitor to another location. Otherwise electricshock may occur.

CAUtIon

Cabl h ld r

r

8/13/2019 22EN33S_EN

7/27

7

E N G

E N GL I S H


Using the Kensington security system

The Kensington security system connector islocated at the back of the Monitor set. For moreinformation of installation and using, refer to the

manual supplied with the Kensington securitysystem or visit http://www.kensington.com .

Connect the Kensington security system cablebetween the Monitor set and a table.

The Kensington security system is optional.You can obtain it from most electronics stores.

note

When you adjust the angle, do not hold thebottom of the Monitor set frame as shown onthe following illustration, as may injure your

fingers.

Do not touch or press the screen whenadjusting the angle of the monitor.

Do not hold this set like below picture.Monitorscreen can detach from stand base and injure

your body.

wARnInG

Tilt from +20 to -5 degrees up or down to adjustthe angle of the Monitor set to suit your view.

note

Fr R ar

8/13/2019 22EN33S_EN

8/27

8/13/2019 22EN33S_EN

9/27

9

E N G

E N GL I S H

USING THE MONITOR SET

UsInG tHe MonItoR set

C c i g a PC y Your Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connecteddevice that users connect to a PC and turnon, without device configuration or userintervention.

D-sUB c c i

Transmits analog video from your PC to theMonitor set. Connect the PC and the Monitor setwith the supplied D-sub 15 pin signal cable asshown in the following illustrations.

y Mac adap r For Apple Macintosh use, a separate plug

adapter is needed to change the 15 pinhigh density (3 row) D-SUB VGA connectoron the supplied cable to a 15 pin 2 rowconnector.

y When using a D-Sub signal input cableconnector for Macintosh

note

8/13/2019 22EN33S_EN

10/27

10

E NG

E N GL I S H

USING THE MONITOR SET

y When you want to use two PC in our Monitor,please connect the signal cable(D-SUB/DVI-D) respectively in Monitor set.

y If you turn the Monitor set on while it is cold,the screen may flicker. This is normal.

y Some red, green, or blue spots may appear

on the screen. This is normal.

y "s lf Imag s i g" Fu c i .This function provides the user with optimaldisplay settings.When the user connectsthe monitor for the first time, this functionautomatically adjusts the display to optimalsettings for individual input signals.(Onlysupported in Analog Mode)

y AUto Fu c i .When you encounter problems such asblurry screen, blurred letters, screen flickeror tilted screen while using the device orafter changing screen resolution, press the

AUTO function button to improve resolution.(Only supported in Analog Mode)

note note

y Connect the signalinput cable and tightenit by turning the screwsclockwise.

y Do not press the screen with your finger fora long time as this may result in temporarydistortion on the screen.

y Avoid displaying a fixed image on thescreen for a long period of time to preventimage burn. Use a screensaver if possible.

CAUtIon Self Image Setting Function

Press the power button on the bottom panel toturn the power on. When monitor power is turnedon, the " s lf Imag s i g " Function is executed

automatically. (Only supported in Analog Mode)

8/13/2019 22EN33S_EN

11/27

11

E N G

E N GL I S H

CUSTOMIZING SETTINGS

CUstoMIZInG settInGs

1 Press the desired button on the bottom of the Monitor set.

2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.To return to the upper menu or set other menu items, use the up arrow ( ) button.

3 Select exi to leave the OSD menu.

MENU MY KEY AUTO INPUT EXITFUNC.

M i r Bu

Bu D crip i Accesses the main menus.( See p.12 )

osD L ck d/osDU l ck d

This function allows you to lock the current control settings,so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.You can unlock the OSD controls at any time by pushingthe MENU button for several seconds. The message "OSDUNLOCKED" should appear.

Use this button to enter MY KEY menu.For more information.( See p.17 )

Use this button to enter Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY,DUAL WEB,MY KEY Setting menus. (See p.18 )

When adjusting your display settings, always press the AUTO button on the MONITORSETUP OSD. (Only supported in Analog Mode)

th b di play m d 1920 x 1080

exi

Exit the OSD(On Screen Display).

(Power Button) Turns the power on or off.

P r I dica r The power indicator stays red if the display is running properly(On Mode). If the display is in Sleep Mode, the powerindicator blinks red.
http://-/?-http://-/?-http://-/?-http://-/?-

8/13/2019 22EN33S_EN

12/27

12

E NG

E N GL I S H


Cu mizi g s i g

M u s i g

1 Press MenU button on the bottom of the Monitor setto display the M u OSD.

2 Set the options by pressing the or or buttons.

3 Select the " n x M u " button to enter the moreoption settings.

4 Select exi to leave the OSD menu.To return to the upper menu or set other menu items,use the up arrow ( ) button.

Each option is explained below.

M u > n x M u D crip i

Pic ur sharp To adjust the clearness of the screen .

C l r GammaTo customize the color of the screen

C l r t mp

Di play H riz alTo adjust the position of the screenV r ical

Cl ckTo improve the clarity and stability of the screen

Pha

o h r La guagTo customize the screen status for a user's operating environment

P r I dica r

M u D crip i

BrighTo adjust the brightness, contrast of the screen

C ra

wid /origi al wid

Switch to full screen mode according to input image signal.

origi al

Change the input image signal ratio to original.* This function works only if input resolution is lower than Monitor set ratio (16:9).

R Restore all factory default settings. Press the , buttons to reset immediately.

8/13/2019 22EN33S_EN

13/27

13

E N G

E N GL I S H


Pic ur



3 Enter to Pic ur by pressing the button.




M u > n x M u > Pic ur D crip i

sharp To adjust the clearness of the screen.

8/13/2019 22EN33S_EN

14/27

14

E NG

E N GL I S H


C l r



3 Select C l r by pressing the button.

4 Enter to C l r by pressing the button.




M u > n x M u > C l r D crip i

Gamma Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor,high gamma values display whitish images and low gamma values displayblackish images.

C l r t mp Cu m R d: Set your own red color levels. Gr : Set your own green color levels. Blu : Set your own blue color levels.

Select the screen color.warm: Set the screen to warm color temperature (more red).M dium: Set the screen to medium color temperature.C l: Set the screen to cool color temperature (more blue).

8/13/2019 22EN33S_EN

15/27

8/13/2019 22EN33S_EN

16/27

16

E NG

E N GL I S H


o h r



3 Select o h r by pressing the button.

4 Enter to o h r by pressing the button.




M u > n x M u > o h r D crip i

La guag To choose the language in which the control names are displayed.

P r I dica r

Use this function to set the power indicator on the bottom side of the monitor toOn or Off.If you set Off, it will go off.If you set On at any time, the power indicator will automatically be turned on.

8/13/2019 22EN33S_EN

17/27

17

E N G

E N GL I S H


MY KeY s i g

1 Press MY KeY button on the bottom of the Monitorset to display the MY KeY OSD.

2 Set the options by pressing the ororbuttons.

3 Select exi to leave the OSD menu.

MY KeY D crip i

MY KeY s i g MY KEY is short key. You can select one of FUNC. (Picture Mode, SUPERENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature.

Back Select Back to return MY KEY menu.


8/13/2019 22EN33S_EN

18/27

18

E NG

E N GL I S H


FUnC. s i g

Pic ur M d

1 Press FUnC. button on the bottom of the Monitor setto display the FUnC. OSD.

2 Enter to Pic ur M d by pressing the button.

3 Set the options by pressing the or buttons.

4 Select exi to leave the OSD menu.To return to theupper menu or set other menu items, use the up

arrow( )button.

Pic ur M d D crip i

Cu m It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.

t x It is a mode that the screen is adjusted to the best for the textworks.

Ph It is a mode that the screen is adjusted to the best to view pictures.

Ci ma It is a mode that the screen is adjusted to the best to view the videos.

Gam It is a mode that the screen is adjusted to the best to play a game.


8/13/2019 22EN33S_EN

19/27

19

E N G

E N GL I S H


sUPeR eneRGY sAVInG

1 Press FUnC. button on the bottom of the Monitor set todisplay the FUnC. OSD.

2 Select sUPeR eneRGY sAVInG by pressing the button.

3 Enter to sUPeR eneRGY sAVInG by pressing the button.


5 Select exi to leave the OSD menu.To return to theupper menu or set other menu items, use the up arrow

( ) button.


sUPeR eneRGY sAVInG D crip i

o Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function

off Disables SUPER ENERGY SAVING.

R Resets the values of total energy consumption reduction and CO2 emission reductionestimates.

y totAL PoweR ReDUCtIon : How much power is saved while using the monitor. y totAL Co2 ReDUCtIon : Change the TOTAL POWER REDUCTION to CO2. y sAVInG DAtA(w/h)

546 mm(21.5 inch)

SUPER SAVING 6 W/h

y Saving Data depends on the Panel. So,those values should be different from each panel and panel

vendor. y LG calculated these values by using br adca vid ig al

(including broadcast video: IEC 62087) y SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING

function.

note

8/13/2019 22EN33S_EN

20/27

20

E NG

E N GL I S H


note y When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSDappear and user should press dual button -> User can bring back to normal mode.

DUAL DIsPLAY

1 Press FUnC. button on the bottom of the Monitor setto display the FUnC. OSD.

2 Select DUAL DIsPLAY by pressing the button.

3 Enter to DUAL DIsPLAY by pressing the button.



arrow ( ) button.

* Before using below functions, please install DUAL SMART SOLUTION programme.

Each option is explained below.DUAL DIsPLAY D crip i

Cl By selecting Clone,user can use secondary monitor as done mode of primary monitor.

ex d d By selecting Extended,user can use secondary monitor as extended mode of primarymonitor.

off If select Off,DUAL DISPLAY is off.

DUAL weB1 Press FUnC. button on the bottom of the Monitor set

to display the FUnC. OSD.

2 Select DUAL weB by pressing the button.

3 Enter to DUAL weB by pressing the button.



arrow ( ) button.

* Before using below functions, please install DUAL SMART SOLUTION programme.


DUAL weB D crip i

o Help user to browse web efficiently by dividing in half. Help to arrange and movewindowson screen. Help user to control dividedwindows ratio.

off If select Off,DUAL WEB is off.

8/13/2019 22EN33S_EN

21/27

21

E N G

E N GL I S H



MY KeY s i g

1 Press FUnC. button on the bottom of the Monitorset to display the FUnC. OSD.

2 Select MY KeY s i g by pressing the button.

3 Enter to MY KeY s i g by pressing the button.


5 Select exi to leave the OSD menu.To return tothe upper menu or set other menu items, use

the up arrow ( ) button.

MY KeY s i g D crip i

Pic ur M d Picture Mode adjust the Monitor set for the best picture appearance.

sUPeR eneRGY sAVInG Enables SUPER ENERGY SAVING you can save energy with this energy-effcientfunction.

DUAL DIsPLAY User can use Clone or Extended in another monitor.

DUAL weB Help user to browse web efficiently by dividing in half and some other convenience inbrowsing dual pages.

8/13/2019 22EN33S_EN

22/27

22

E NG

E N GL I S H

SPECIFICATIONS

tRoUBLesHootInG

Ch ck h f ll i g b f r calli g f r rvic .

n imag app arIs the power cord of the displayconnected?

y Check and see if the power cord is connected properly to the poweroutlet.

Is the power indicator light on? y Press the Power button.Is the power on and the powerindicator Red?

y Adjust the brightness and the contrast.

Is the power indicator flickering? y If the display is in power saving mode, try moving the mouse orpressing any key on the keyboard to bring up the screen.

y Try to turn on the PC.Do you see an "OUT OF RANGE"message on the screen?

y This message appears when the signal from the PC (video card) isout of horizontal or vertical frequency range of the display. See the'Specifications' section of this manual and configure your displayagain.

Do you see a "NO SIGNAL"message on the screen?

y When the monitor is on "No-Signal" in 5 minutes, the monitor goes toDPM mode.

D y u a "osD LoCKeD" m ag h cr ?

Do you see OSD LOCKED whenyou push MENU button?

y You can secure the current control settings, so that they cannot beinadvertently changed. You can unlock the OSD controls at any timeby pushing the MENU button for several seconds: the message OSDUNLOCKED will appear.

Di play imag i i c rr c

Display Position is incorrect. y Press the AUto button to automatically adjust your display image tothe ideal setting.

On the screen background, verticalbars or stripes are visible.

y Press the AUto button to automatically adjust your display image tothe ideal setting.

Any horizontal noise appearing inany image or characters are notclearly portrayed.

y Press the AUto button to automatically adjust your display image tothe ideal setting.

y Check C r l Pa l Di play s i g and adjust the display

to the recommended resolution or adjust the display image to the idealsetting. Set the color setting higher than 24 bits (true color).

8/13/2019 22EN33S_EN

23/27

23

E N G

E N GL I S H

SPECIFICATIONS

Di play imag i i c rr c

The screen color is mono orabnormal.

y Check if the signal cable is properly connected and use a screwdriverto fasten if necessary.

y

Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (true color) at C r l Pa l

s i g .The screen blinks. y Check if the screen is set to interlace mode and if yes, change it to the

recommend resolution.

D y u a "U r c g iz d m i r, Plug&Play (VesA DDC) m i r f u d" m ag ?

Have you installed the displaydriver?

y Be sure to install the display driver from the display driver CD (ordiskette) that comes with your display. Or, you can also download thedriver from our web site: http://www.lg.com.

y

Make sure to check if the video card supports Plug&Play function.

y Check C r l Pa l Di play s i g and see if the frequency or the resolution were

changed. If yes, readjust the video card to the recommend resolution. y If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the

screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. y The setting method can differ by computer and O/S (Operation System), and resolution mentioned

above may not be supported by the video card performance. In this case, please ask to the computeror the video card manufacturer.

CAUtIon

8/13/2019 22EN33S_EN

24/27

24

E NG

E N GL I S H

SPECIFICATIONS

sPeCIFICAtIons

Di play scr typ 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 54.6 cm

Pix l Pi ch 0.248 mm x 0.248 mm (Pixel Pitch)sy c I pu H riz al Fr qu cy 30 kHz to 83 kHz (Automatic)

V r ical Fr qu cy 56Hz to 75Hz (D-SUB)I pu F rm Separate Sync.

Vid I pu sig al I pu 15 pin D-SUB ConnectorI pu F rm RGB Analog (0.7 Vp-p/ 75 ohm)

R lu i Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz

R c mm d VESA 1920 x 1080 @ 60 HzPlug & Play DDC 2B(Analog)P rC ump i

On Mode : 23 W(Typ.)Sleep Mode 0.3 WOff Mode 0.3 W

P r I pu 19 V 1.2 AAC-DC Adap r Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC

or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC

or Type ADS-40FSG-19 19025GPB-2,manufactured by SHENZHEN HONOR ELECTRONICor Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type PSAB-L203A,manufactured by LG Innotek Co.,Ltdor Type PSAB-L202B,manufactured by LG Innotek Co.,Ltdor Type PSAB-L202C,manufactured by LG Innotek Co.,Ltdor Type PSAB-L202D,manufactured by LG Innotek Co.,LtdoUtPUt: 19 V 1.7 A

Dim i(wid h x H igh xD p h)

wi h s a d 50.9 cm x 38.7 cm x 18.1 cmwi h u s a d 50.9 cm x 31.3 cm x 5.5 cm

w igh 2.6 kgtil Ra g -5 to 20e vir m alc di i

op ra i g t mp ra urop ra i g Humidi y

10C to 35 C10 % to 80 %

s rag t mp ra urs rag Humidi y

-20C to 60 C 5 % to 90 % non-Condensing

s a d Ba Attached ( ), Detached (O)P r c rd Wall-outlet type

Product specifications shown above may be changed without prior notice due to upgrade of productfunctions.

22en33s

8/13/2019 22EN33S_EN

25/27

25

E N G

E N GL I S H

SPECIFICATIONS

Pr M d (R lu i )

Di play M d (R lu i ) H riz alFr qu cy(kHz)V r icalFr qu cy(Hz) P lari y(H/V)

720 x 400 31.468 70 -/+640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

1024 x 768 48.363 60 -/-

1024 x 768 60.023 75 +/+

1152 x 864 67.500 75 +/+

1280 x 1024 63.981 60 +/+

1280 x 1024 79.976 75 +/+

1680 x 1050 65.290 60 -/+1920 x 1080 67.500 60 +/+ Recommend Mode

I dica r

M d LeD C l r

On Mode Red

Sleep Mode Blinking Red

Off Mode Off

8/13/2019 22EN33S_EN

26/27

26

E NG

E N GL I S H

PROPER POSTURE

Pr p r p ur f r u i g h M i r .

PRoPeR PostURe

Adjust theMonitor set andyour posture to

allow you to viewimages at the

optimal viewingangle.

Place your handsgently on the

keyboard, keepingyour arms bent at

the elbows andhorizontally outright.

Adjust the location of theMonitor set to avoid itreflecting light.

8/13/2019 22EN33S_EN

27/27

Make sure to read the Safety Precautions beforeusing the product.Keep the Owners Manual (CD) in an accessibleplace for future reference.The model and serial number of the SET islocated on the back and one side of the SET.Record it below should you ever need service. As an ENERGY STAR Partner LGE

U. S. A.,Inc. has determined that thisd h ENERGY STAR

ENERGY STAR is a set of power-savingguidelines issued by the U.S.EnvironmentalProtection Agency(EPA).

MODEL

Documents

22EN33S_EN