7/28/2019 2178 Reference Aci
1/3
DAFTAR PUSTAKA
ACI 214.4R-03, 2003, Guide for Obtaining and Interpreting
Compressive Strength
Results , ACI 214 Committee Report.
ACI 228.1R-03, 2003, In-Place Methods to Estimate Concrete
Strength , ACI 228
Committee Report.
ASTM C 33/03, 2003, Standard Spesification for Concrete
Aggregates , Annual
Books of ASTM Standards, USA.
ASTM C 39/C 39M-05, 2005, Standard Test Method for Compressive
Strenght of
Cylindrical Concrete Spesimens , Annual Books of ASTM Standards,
USA.
ASTM C 42/C 42M-04, 2004, Standard Test Method for Obtaining and
Testing
Drilled Cores and Sawed Beams of Concrete , Annual Books of
ASTM
Standard, USA.
ASTM C 494/C 494M-05a, 2005, Standard Specification for Chemical
Admixtures
for Concrete , Annual Books of ASTM Standards, USA.
ASTM C 597, 2006, Test Method for Pulse Velocity Through
Concrete , Annual
Books of ASTM Standard, USA.
ASTM C 803/C 803M, 2006, Test Method for Penetration Resistance
of Hardened
Concrete , Annual Books of ASTM Standard, USA.
ASTM C 805-02, 2002, Standard Test Method for Rebound Number of
Hardened
Concrete . Annual Books of ASTM Standard, USA.
ASTM C 900, 2006, Test method for Pullout Strength Hardened
Concrete , Annual
Books of ASTM Standard, USA.
ASTM C 1150, 2006, Test Method for the Break-Off Number of
Concrete , Annual
Books of ASTM Standard, USA.
ASTM C 873, 2006, Test Method for Compressive Strength of
Concrete Cylinders
Cast in Place in Cylindrical Molds , Annual Books of ASTM
Standard,USA.
Bartlett, F. M. and MacGregor, J. G., 1994, Effect of Core
Diameter on Concrete
Core Strength , ACI Material Journal, Vol. 91, no. 5. Pp.
460-470.
Bartlett, F. M. and MacGregor, J. G., 1994, Effect of
Length-to-Diameter on Con-
crete Core Strength , ACI Material Journal, Vol. 91, no. 4. Pp.
339-348.
7/28/2019 2178 Reference Aci
2/3
Bartlett, F. M. and MacGregor, J. G., 1994, Effect of Moisture
Condition on Con-
crete Core Strength , ACI Material Journal, Vol. 91, no. 3. Pp.
227-236.
Bartlett, F. M. and MacGregor, J. G., 1995, Equivalent Specified
Concrete Strength
from Core Test Data, Concrete International, Vol. 17, no. 3. Pp.
52-58.
Malhotra, V. M. and Carette, G., 1980, Comparison of Pullout
Strength of Concrete
with Compressive Strength of Cylinders and Cores, Pulse
Velocity, and Re-
bound Number, ACI Journal Proceedings, Vol. 77, no. 3, pp.
161-170.
Malhotra, V. M., 1977, Contract Strength Requirements Cores
Versus In Situ
Evaluation, ACI Journal Proceedings, Vol. 73, no. 11, pp.
163-172.
Mindess, S., Young, J. F., Darwin, D, 2003, Concrete ; Second
Edition , Upper Saddle
River, Pearson Education Inc, New Jearsey.
Mulyono, Tri, 2004, Teknologi Beton , Andi, Yogyakarta.
Nasser, K. W., and Al-Manaseer, A. A., 1987b, Comparison of
Nondestructive Tes-
ters of Hardened Concrete , ACI Materials Journal , V. 84, No.
5, Sept.-
Oct., pp. 374-380.
PBBI 1971 NI-2, 1971, Bab.3 Pasal 3.3 Agregat Halus (Pasir),
Bandung : Direktorat
Penyelidikan Masalah Bangunan, Departemen Pekerjaan Umum dan
Tenaga
Listrik.
PBBI 1971 NI-2, 1971, Bab.3 Pasal 3.4 Agregat Kasar (Kerikil dan
Batu Petjah),
Direktorat Penyelidikan Masalah Bangunan, Departemen Pekerjaan
Umum
dan Tenaga Listrik, Bandung.
PBBI 1971 NI-2, 1971, Bab.4 Pasal 4.1 Umum, Direktorat
Penyelidikan Masalah
Bangunan, Departemen Pekerjaan Umum dan Tenaga Listrik,
Bandung
PBBI 1971 NI-2, 1971, Bab.4 Pasal 4.2 Kelas dan Mutu Beton,
Direktorat Penyelidi-
kan Masalah Bangunan, Departemen Pekerjaan Umum dan Tenaga
Listrik,
Bandung.
SK SNI-03-2847-2002, 2002, Tata Cara Perhitungan Struktur Beton
Untuk Bangu-nan Gedung , Badan Standardisasi Nasional.
Tanigawa, Y.; Baba, K.; and Mori, H., 1984, Estimation of
Concrete Strength by
Combined Nondestructive Testing Method , In Situ/Nondestructive
Testing
of Concrete , SP-82, V. M. Malhotra, ed., American Concrete
Institute, Far-
mington Hills, Mich., pp. 57-76.
