View
224
Download
2
Tags:
Embed Size (px)
Citation preview
2.1 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Identifying Pre-installation TasksMinimum hardware requirements Pentium 133 MHz or faster processor VGA monitor 128 MB RAM for five or fewer clients and 256 MB for
larger networks 1.5 GB hard disk space is required for setup; 2.5 GB hard
disk space is recommended High-density, 3.5-inch floppy disk drive A 12X CD-ROM drive when installing from CD A network interface card (NIC) if network connectivity is
required Mouse and keyboard
(Skill 1)
2.2 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Other pre-installation tasks Make sure that the hardware components of the system are listed
on Microsoft’s Windows Server Catalog Determine whether it is a new installation or an upgrade of an
existing version Examine hard disk partitions (Microsoft recommends a partition of at
least 2 GB) Determine the file system format for the partition (FAT, FAT32, or
NTFS) Determine whether the computer on which Windows Server 2003 is
to be installed will be joining a workgroup or domain Decide which Windows Server 2003 optional components to install
Identifying Pre-installation Tasks (2)
(Skill 1)
2.3 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Other pre-installation tasks Uncompress any compressed volumes on the computer
before upgrading to Windows Server 2003You can only upgrade to Windows Server 2003 if the drive
was compressed with NTFS compressionDisable disk mirroring
Disable any anti-virus software installed on the computer Check for software compatibility using the Microsoft
Application Compatibility Analyzer tool Disconnect UPS devices from the computer on which
Windows Server 2003 is to be installed
Identifying Pre-installation Tasks (3)
(Skill 1)
2.4 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Identifying Pre-installation Tasks (4)
Licensing modes for Windows Server 2003 Per Server licensing mode
Provides a specific number of Client Access Licenses (CALs) per server
Suitable for small companies Need enough CALs to over all simultaneous users
Per Device or Per User licensing mode Provides a separate CAL for each named user or specified
device Ideal for large networks
(Skill 1)
2.5 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Identifying the Different Phases of the Windows Server 2003 Installation Process
Pre-copy phase Text mode phase GUI mode phase
Gathering Information About Your Computer stage Installing Windows Server 2003 Networking Components
stage Completing Setup stage
(Skill 2)
2.6 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Installing Windows Server 2003 Using the Installation CD-ROM
Attended installation Requires user interaction The most common method for an attended installation is
using the installation CD-ROM Full installations are performed on computers that either
have no current operating system or that have an operating system that you are going to overwrite
(Skill 3)
2.7 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 3)
Figure 2-6 Welcome to Setup
2.8 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 3)
Figure 2-7 Windows Licensing Agreement
2.9 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 3)
Figure 2-8 List of existing partitions and unpartitioned space
2.10 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 3)
Figure 2-9 Windows Server 2003 Setup
2.11 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 3)
Figure 2-10 Licensing Modes
2.12 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 3)
Figure 2-11 Passwords message box
2.13 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 3)
Figure 2-12 Welcome to Windows Microsoft Windows Server 2003
2.14 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 3)
Figure 2-13 Activating the Server License
2.15 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 5)
Figure 2-16 The License Agreement screen
2.16 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Troubleshooting Failed Installations (2)
(Skill 6)
Common STOP errors
STOP Message IRQL_NOT_LESS_OR_EQUAL STOP Message KMODE_EXCEPTION_NOT_HANDLED STOP Message FAT_FILE_SYSTEM or
NTFS_FILE_SYSTEM STOP Message UNKNOWN_HARD_ERROR STOP Message DRIVER_POWER_STATE_FAILURE STOP Message INACCESSIBLE_BOOT_DEVICE
2.17 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 6)
Figure 2-18 Problems that cause failed installations
2.18 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Figure 2-19 Booting with Last Known Good Configuration
(Skill 6)
2.19 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Working with the Device Manager (2)
Device Manager View menu Provides a graphical list of all installed hardware devices Available views
Devices by type Devices by connection Resources by type Resources by connection Show Hidden Devices
(Skill 8)
2.20 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Plug and Play Automatically configures resources a device needs using
system resources that are not currently in use If a device is not PnP-compatible, you may need to manually
configure resource settings on the devices themselves
Resources commonly used by hardware I/O address DMA (Direct Memory Access) channel Interrupt Request (IRQ) Memory addresses
(Skill 8)
Working with the Device Manager (3)
2.21 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 8)
Figure 2-28 Devices by type view
2.22 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 8)
Figure 2-29 Resources by type view
2.23 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 8)
Figure 2-30 The Resources tab
If the Use automatic settings check box is
grayed out, you cannot modify the
resources used by the device; if you can
clear it, click the Change Setting button to
modify a resource setting
2.24 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Configuring Driver Signing Options
Windows Server 2003 uses driver signing options to ensure the use of high quality drivers for any hardware device
Microsoft uses digital signatures for device drivers to identify drivers that are compatible with Microsoft Windows Server 2003
A driver’s digital signature indicates that the driver was tested with Windows for compatibility and has not been altered since testing
(Skill 9)
2.25 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 9)
Configuring Driver Signing Options (2)
Levels of driver signing security Ignore setting
Allows any driver to be installed The driver does not need to have a digital signature
Warn setting Default setting Notifies the user if a driver that is being installed does not
have a Microsoft digital signature Block setting
Prevents the installation of unsigned drivers The installation program will not install any device driver that
does not have a digital signature
2.26 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 9)
Figure 2-35 Opening the System Properties dialog box
2.27 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 9)
Figure 2-36 The Hardware tab in the System Properties dialog box
Click to initiate the Add
Hardware Wizard
Click to open the Driver Signing
Options dialog box
2.28 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices (Skill 9)
Figure 2-37 The Driver Signing Options dialog box
Select to set the selected
driver signing option as
the default option for all of
the users that log on to
the system
2.29 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Working with Hardware Profiles and Event Logs
Hardware profiles Describe the selection of a specific configuration of
hardware devices (such as network cards, printers, etc.) at the time the operating system is initialized
Are most commonly used in situations where one hardware profile is used at one location and another at an alternate location
Profile 1 (Current) A default hardware profile created when you install Windows
Server 2003 Every device that is installed during the initial installation will be
included in Profile 1
(Skill 10)
2.30 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Figure 2-38 The Hardware Profiles dialog box
(Skill 10)
2.31 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Figure 2-39 Entering a new profile name
(Skill 10)
2.32 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Figure 2-41 Disabling a device for a hardware profile
(Skill 10)
2.33 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Figure 2-42 A disabled device in Device Manager
Disabled devices display
with a red x
(Skill 10)
2.34 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Figure 2-43 Event logs on a member server
The System log
records events such
as the failure of a
service or device
driver to start at boot
time
(Skill 10)
2.35 © 2004 Pearson Education, Inc.
Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment
Lesson 2: Installing Windows Server 2003 and Server Hardware Devices
Figure 2-44 Event logs on a domain controller/DNS server
The Directory
Service log
records events
logged by Active
Directory
(Skill 10)