-
CMYK
CMYK
Copper Nickel AlloysFor On/Off Shore-Plant ApplicationAnd
Navy-Special Marine-Industry.
In our fully intergrated factory, we manufacture from raw
material all components into finished products.
Monel400, 90/10 & 70/30 Copper Nickel forSeawater/Firewater
Corrosion resistant piping systems.
10Ⓡ : 90/10 copper Nickel alloy C70630Ⓡ : 70/30 copper Nickel
alloy C715
1″O.D. up to 28″O.D.
3/8″O.D. UP TO 4″O.D.Socket weld fittings; Elbows, Tees,
Reducers, Couplings, Connectors, Unions and Olets.
Composite and Solid 1/2″O.D. up to 24″O.D. Weld neck, Slip on,
Blind and Others.
-
-
-
HEAD OFFICE - FACTORY120, HWAJEONSANDAN 6-RO, GANGSEO-GU, BUSAN,
KOREATel : +82-51-312-2161 / Fax : +82-51-312-2163Web site :
http://www.haewon.net / E-mail : [email protected]
COPPER & COPPER ALLOYSNICKEL & COPPER ALLOYS
AL-BRONZE materials are also available
10Ⓡ : 90/10 copper Nickel alloy C70630Ⓡ : 70/30 copper Nickel
alloy C715
Material Specifications / Comparison Tables
STANDARDSComparison-Table of Standard Specifications for
CuNi90/10
The alloys CuNi90/10 and CuZn20Al2 meetthe requirements
regarding the chemicalanalysis of several national and
international standards.
Material Specifications / Comparison TablesThe chemical
compositions of CuNi 90/10 cupronickel alloys have been modifiedso
that they meet the requirements of all the main international
standards.
The mechanical properties of the final products correspond to
those specified in therelevant national and international
standards.
Mechanical Properties
Ni %
Fe %
Mn %
C %
Pb %
S %
P %
Zn %
other imp
Cu %
ALLOY
10.0 ~ 11.0
1.5 ~ 1.8
0.6 ~ 1.0
max.0.05
max.0.01
max.0.005
max.0.02
max.0.05
max.0.30
rem.
HAEWONSTANDARD
9.0 ~ 11.0
1.0 ~ 1.8
max 1.0
-
max.0.05
-
-
max.0.50
-
rem.
ASTM B466C70600
10.0 ~ 11.0
1.0 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.01
max.0.05
max.0.02
max.0.02
max.0.30
rem.
EEMUA144-1987UNS 7060X
10.0 ~ 11.0
1.5 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.01
max.0.02
-
-
max.0.30
rem.
BS2871CN102
9.0 ~ 11.0
1.5 ~ 1.8
0.5 ~ 1.0
max.0.05
max.0.01
max.0.005
max.0.02
max.0.05
max.0.20
rem.
DIN 860192. 1972
9.0 ~ 11.0
1.0 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.03
max.0.02
max.0.02
max.0.05
max.0.20
rem.
DIN 176642. 0872
9.0 ~ 11.0
1.0 ~ 1.8
max 1.0
max.0.05
max.0.02
max.0.02
max.0.02
max.0.50
-
rem.
MIL-T-16420KASTM B 466C70600
CuNi 90/10•ASTM B466 UNS C70600•EEMUA 144 UNS 7060X•BS2871
CN102•DIN 17664 / 17671 2.0872•DIN 86019 2.1972
CuNi 70/30•ASTM B466 UNS C71500•BS2871 CN107•DIN 17664 / 17671
2.0882
MONEL 400•ASTM B564 UNS04400
ALUMINIUM BRASS & BRONZE•ASTM B111 C68700•ASTM B124
C63200•BS2871 CZ110•DIN 17660 / 17671 2.0460•ASTM B62 C83600
General Technical InformationGeneral Technical Information
-
CMYK
CMYK
Copper Nickel AlloysFor On/Off Shore-Plant ApplicationAnd
Navy-Special Marine-Industry.
In our fully intergrated factory, we manufacture from raw
material all components into finished products.
Monel400, 90/10 & 70/30 Copper Nickel forSeawater/Firewater
Corrosion resistant piping systems.
10Ⓡ
: 90/10 copper Nickel alloy C70630Ⓡ
: 70/30 copper Nickel alloy C715
1″O.D. up to 28″O.D.
3/8″O.D. UP TO 4″O.D.Socket weld fittings; Elbows, Tees,
Reducers, Couplings, Connectors, Unions and Olets.
Composite and Solid 1/2″O.D. up to 24″O.D. Weld neck, Slip on,
Blind and Others.
-
-
-
HEAD OFFICE - FACTORY120, HWAJEONSANDAN 6-RO, GANGSEO-GU, BUSAN,
KOREATel : +82-51-312-2161/ Fax : +82-51-312-2163Web site :
http://www.haewon.net/ E-mail : [email protected]
COPPER & COPPER ALLOYSNICKEL & COPPER ALLOYS
AL-BRONZE materials are also available
10Ⓡ
: 90/10 copper Nickel alloy C70630Ⓡ
: 70/30 copper Nickel alloy C715
Material Specifications / Comparison Tables
STANDARDS Comparison-Table of Standard Specifications for
CuNi90/10
The alloys CuNi90/10 and CuZn20Al2 meetthe requirements
regarding the chemicalanalysis of several national and
international standards.
Material Specifications / Comparison TablesThe chemical
compositions of CuNi 90/10 cupronickel alloys have been modifiedso
that they meet the requirements of all the main international
standards.
The mechanical properties of the final products correspond to
those specified in therelevant national and international
standards.
Mechanical Properties
Ni %
Fe %
Mn %
C %
Pb %
S %
P %
Zn %
other imp
Cu %
ALLOY
10.0 ~ 11.0
1.5 ~ 1.8
0.6 ~ 1.0
max.0.05
max.0.01
max.0.005
max.0.02
max.0.05
max.0.30
rem.
HAEWONSTANDARD
9.0 ~ 11.0
1.0 ~ 1.8
max 1.0
-
max.0.05
-
-
max.0.50
-
rem.
ASTM B466C70600
10.0 ~ 11.0
1.0 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.01
max.0.05
max.0.02
max.0.02
max.0.30
rem.
EEMUA144-1987UNS 7060X
10.0 ~ 11.0
1.5 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.01
max.0.02
-
-
max.0.30
rem.
BS2871CN102
9.0 ~ 11.0
1.5 ~ 1.8
0.5 ~ 1.0
max.0.05
max.0.01
max.0.005
max.0.02
max.0.05
max.0.20
rem.
DIN 860192. 1972
9.0 ~ 11.0
1.0 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.03
max.0.02
max.0.02
max.0.05
max.0.20
rem.
DIN 176642. 0872
9.0 ~ 11.0
1.0 ~ 1.8
max 1.0
max.0.05
max.0.02
max.0.02
max.0.02
max.0.50
-
rem.
MIL-T-16420KASTM B 466C70600
CuNi 90/10•ASTM B466 UNS C70600•EEMUA 144 UNS 7060X•BS2871
CN102•DIN 17664 / 17671 2.0872•DIN 86019 2.1972
CuNi 70/30•ASTM B466 UNS C71500•BS2871 CN107•DIN 17664 / 17671
2.0882
MONEL 400•ASTM B564 UNS04400
ALUMINIUM BRASS & BRONZE•ASTM B111 C68700•ASTM B124
C63200•BS2871 CZ110•DIN 17660 / 17671 2.0460•ASTM B62 C83600
General Technical Information General Technical Information
-
CMYK
CMYK
Copper Nickel AlloysFor On/Off Shore-Plant ApplicationAnd
Navy-Special Marine-Industry.
In our fully intergrated factory, we manufacture from raw
material all components into finished products.
Monel400, 90/10 & 70/30 Copper Nickel forSeawater/Firewater
Corrosion resistant piping systems.
10Ⓡ
: 90/10 copper Nickel alloy C70630Ⓡ
: 70/30 copper Nickel alloy C715
1″O.D. up to 28″O.D.
3/8″O.D. UP TO 4″O.D.Socket weld fittings; Elbows, Tees,
Reducers, Couplings, Connectors, Unions and Olets.
Composite and Solid 1/2″O.D. up to 24″O.D. Weld neck, Slip on,
Blind and Others.
-
-
-
HEAD OFFICE - FACTORY120, HWAJEONSANDAN 6-RO, GANGSEO-GU, BUSAN,
KOREATel : +82-51-312-2161/ Fax : +82-51-312-2163Web site :
http://www.haewon.net/ E-mail : [email protected]
COPPER & COPPER ALLOYSNICKEL & COPPER ALLOYS
AL-BRONZE materials are also available
10Ⓡ
: 90/10 copper Nickel alloy C70630Ⓡ
: 70/30 copper Nickel alloy C715
Material Specifications / Comparison Tables
STANDARDS Comparison-Table of Standard Specifications for
CuNi90/10
The alloys CuNi90/10 and CuZn20Al2 meetthe requirements
regarding the chemicalanalysis of several national and
international standards.
Material Specifications / Comparison TablesThe chemical
compositions of CuNi 90/10 cupronickel alloys have been modifiedso
that they meet the requirements of all the main international
standards.
The mechanical properties of the final products correspond to
those specified in therelevant national and international
standards.
Mechanical Properties
Ni %
Fe %
Mn %
C %
Pb %
S %
P %
Zn %
other imp
Cu %
ALLOY
10.0 ~ 11.0
1.5 ~ 1.8
0.6 ~ 1.0
max.0.05
max.0.01
max.0.005
max.0.02
max.0.05
max.0.30
rem.
HAEWONSTANDARD
9.0 ~ 11.0
1.0 ~ 1.8
max 1.0
-
max.0.05
-
-
max.0.50
-
rem.
ASTM B466C70600
10.0 ~ 11.0
1.0 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.01
max.0.05
max.0.02
max.0.02
max.0.30
rem.
EEMUA144-1987UNS 7060X
10.0 ~ 11.0
1.5 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.01
max.0.02
-
-
max.0.30
rem.
BS2871CN102
9.0 ~ 11.0
1.5 ~ 1.8
0.5 ~ 1.0
max.0.05
max.0.01
max.0.005
max.0.02
max.0.05
max.0.20
rem.
DIN 860192. 1972
9.0 ~ 11.0
1.0 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.03
max.0.02
max.0.02
max.0.05
max.0.20
rem.
DIN 176642. 0872
9.0 ~ 11.0
1.0 ~ 1.8
max 1.0
max.0.05
max.0.02
max.0.02
max.0.02
max.0.50
-
rem.
MIL-T-16420KASTM B 466C70600
CuNi 90/10•ASTM B466 UNS C70600•EEMUA 144 UNS 7060X•BS2871
CN102•DIN 17664 / 17671 2.0872•DIN 86019 2.1972
CuNi 70/30•ASTM B466 UNS C71500•BS2871 CN107•DIN 17664 / 17671
2.0882
MONEL 400•ASTM B564 UNS04400
ALUMINIUM BRASS & BRONZE•ASTM B111 C68700•ASTM B124
C63200•BS2871 CZ110•DIN 17660 / 17671 2.0460•ASTM B62 C83600
General Technical Information General Technical Information
-
CMYK
CMYK
Copper Nickel AlloysFor On/Off Shore-Plant ApplicationAnd
Navy-Special Marine-Industry.
In our fully intergrated factory, we manufacture from raw
material all components into finished products.
Monel400, 90/10 & 70/30 Copper Nickel forSeawater/Firewater
Corrosion resistant piping systems.
10Ⓡ : 90/10 copper Nickel alloy C70630Ⓡ : 70/30 copper Nickel
alloy C715
1″O.D. up to 28″O.D.
3/8″O.D. UP TO 4″O.D.Socket weld fittings; Elbows, Tees,
Reducers, Couplings, Connectors, Unions and Olets.
Composite and Solid 1/2″O.D. up to 24″O.D. Weld neck, Slip on,
Blind and Others.
-
-
-
HEAD OFFICE - FACTORY120, HWAJEONSANDAN 6-RO, GANGSEO-GU, BUSAN,
KOREATel : +82-51-312-2161 / Fax : +82-51-312-2163Web site :
http://www.haewon.net / E-mail : [email protected]
COPPER & COPPER ALLOYSNICKEL & COPPER ALLOYS
AL-BRONZE materials are also available
10Ⓡ : 90/10 copper Nickel alloy C70630Ⓡ : 70/30 copper Nickel
alloy C715
Material Specifications / Comparison Tables
STANDARDSComparison-Table of Standard Specifications for
CuNi90/10
The alloys CuNi90/10 and CuZn20Al2 meetthe requirements
regarding the chemicalanalysis of several national and
international standards.
Material Specifications / Comparison TablesThe chemical
compositions of CuNi 90/10 cupronickel alloys have been modifiedso
that they meet the requirements of all the main international
standards.
The mechanical properties of the final products correspond to
those specified in therelevant national and international
standards.
Mechanical Properties
Ni %
Fe %
Mn %
C %
Pb %
S %
P %
Zn %
other imp
Cu %
ALLOY
10.0 ~ 11.0
1.5 ~ 1.8
0.6 ~ 1.0
max.0.05
max.0.01
max.0.005
max.0.02
max.0.05
max.0.30
rem.
HAEWONSTANDARD
9.0 ~ 11.0
1.0 ~ 1.8
max 1.0
-
max.0.05
-
-
max.0.50
-
rem.
ASTM B466C70600
10.0 ~ 11.0
1.0 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.01
max.0.05
max.0.02
max.0.02
max.0.30
rem.
EEMUA144-1987UNS 7060X
10.0 ~ 11.0
1.5 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.01
max.0.02
-
-
max.0.30
rem.
BS2871CN102
9.0 ~ 11.0
1.5 ~ 1.8
0.5 ~ 1.0
max.0.05
max.0.01
max.0.005
max.0.02
max.0.05
max.0.20
rem.
DIN 860192. 1972
9.0 ~ 11.0
1.0 ~ 2.0
0.5 ~ 1.0
max.0.05
max.0.03
max.0.02
max.0.02
max.0.05
max.0.20
rem.
DIN 176642. 0872
9.0 ~ 11.0
1.0 ~ 1.8
max 1.0
max.0.05
max.0.02
max.0.02
max.0.02
max.0.50
-
rem.
MIL-T-16420KASTM B 466C70600
CuNi 90/10•ASTM B466 UNS C70600•EEMUA 144 UNS 7060X•BS2871
CN102•DIN 17664 / 17671 2.0872•DIN 86019 2.1972
CuNi 70/30•ASTM B466 UNS C71500•BS2871 CN107•DIN 17664 / 17671
2.0882
MONEL 400•ASTM B564 UNS04400
ALUMINIUM BRASS & BRONZE•ASTM B111 C68700•ASTM B124
C63200•BS2871 CZ110•DIN 17660 / 17671 2.0460•ASTM B62 C83600
General Technical InformationGeneral Technical Information
1.pdf2.pdf3.pdf4.pdf
