2019...• Pre-contoured Locking Carpal Arthrodesis Plates 904.436.6540 email: [email protected] Over 25 Years of delivering the widest selection of veterinary orthopedic implants,

Reference ............................................................RPower Equipment ........................................... 1Double Threaded (DT) Locking ............. 2Special Situation ............................................... 3Trauma & Fracture (Swiss + VOI) ......... 4CBLO .................................................................... 5TPLO ..................................................................... 6

Wound Closure ............................................... 8TTA ......................................................................... 9Titanium .............................................................10K Wire, Pins & Accessories ......................11Screw Racks & Sterilization Cases ......12Blades & Burs ..................................................13Instruments ......................................................14Index ........................................................................ i

Veterinary Orthopedic Implants

2019Table of Contents

Your VOI Account Number

_________________________Your VOI Sales Rep

_________________________New for 2019 • Elite TPLO Plate

• 1.5 DT Locking Fracture• Aesculap® Instruments

• Aesculap® Elan 4 High Speed Drill• VTS® Fortigen-P Bone Graft

• DemeTECH® Suture, Mesh & Bone Wax• Annodized Multi Screw Racks• Pre-contoured Locking Carpal

Arthrodesis Plates

www.vetimplants.com email: [email protected] . 436 . 6540

Over 25 Years of delivering the widest selection

of veterinary orthopedic implants, power equipment and surgical instruments with

unparalleled customer service.

“Veterinary Orthopedic Implants has made my TPLO surgical start-up hassle free. The amount of products

out there can be very intimidating, but ordering a power system and implants could not have been easier, or quicker. The products are top quality and the customer service is

even better. There is no reason to look elsewhere for veterinary orthopedic supplies.”

Ryan M Black, DVMAnimal Clinic of Oxford

Above and inside cover: “ The Maladies of Dogs Being Treated”, by Gaston Pheobus, livre de la Chasse, MS fr 616 fol 40V - Bibliotheque Nationale, Paris.Gaston Phoebus, (1331-91), Count of Foix, was one of the three leading personalities in France during the Gothic Era. Known as a delicate colorist, his ambition was to put a collection of miniatures together exemplifying life as it was in feudal France. One of his passions was to portray the importance of animals in the daily life. Their integral role in the hunt necessitated the discriminate care of dogs, as depicted in this piece.

R.2


Reference | Référence | 参

照

Ordering | Commande | ご注文There are multiple ways to place an order. Orders may be faxed, placed online or e-mailed 24 hours a day. Please use our product codes when ordering.

International Orders | Commandes Internationales | 国外からのご注文All orders must be paid in full by Mastercard, Visa or bank wire transfer before shipping.

New Customers | Nouveaux Clients | 新規のお客様Initial orders require payment by Visa, Mastercard, Discover or American Express. Net 30 terms are then available to qualified customers.

Existing Customers | Clients existants | 既存のお客様Orders will be invoiced and payment must be remitted within 30 days.Shipping | Livraison | 発送Please specify when you would like to receive your order. For same day shipping, orders must be received by 4pm EST, Mon - Fri. Domestic options include overnight Early, AM or end of day, 2nd day AM and PM, 3 day, and Saturday where available.All orders will be sent UPS ground unless otherwise requested. Freight charges will be added to invoice.Receipt of Orders | Réception des commandes | 受け取り時のご注意Each order is double checked for accuracy before it is sent. Occasionally, there are discrepancies or miscommunications with orders. Please check your order at time of receipt. Customers are responsible to notify VOI of any discrepancies within 48 hours of delivery.

Return Policy | Politique de retour | 返品条件VOI products are guaranteed to meet specifications and be free of defects in workmanship and materials. Returned products will be replaced or repaired at our discretion provided there is no evidence of abuse, misuse or unservice-ability due to wear from prolonged use. This policy presumes instruments are used under normal operating conditions, established techniques and cleaned properly after each use. Returned instruments must be properly cleaned. Visit http://vetimplants.com/return-policy/ for all required forms and information.

Return Authorization | Autorisation de retour | 返品確認Please call or visit www.vetimplants.com for authorization before returning an item. Unused products may be returned for a credit or refund (if pre-paid) within 30 days of receipt. All returns must be accompanied by an RMA number. If items are returned in ”like new*” condition, a credit will be given when returned goods are received. Returns are subject to a 35% re-stocking fee. Special order items may not be returned (this applies to Integra™-Miltex®, Aesculap® and gSource® instruments that have been removed from their original packaging as well as special order implants and other instruments).

Shipping and insurance charges are non-refundable. Customers who return items after 30 days will receive a merchandise credit. Merchandise credits are valid for one year and become void if not used during that time. Credit will not be given for items not purchased directly from VOI or for items that VOI no longer offers.

Send returns to: VOI (Returns Dept.) 310 Commerce Lake Drive, #107St. Augustine, FL 32095

E-mail: [email protected]

Online: www.vetimplants.com

Telephone: 1 (904) 436-6540

FAX: 1 (904) 436-6546 See quick reorder form on page R.10

V.O.I. Team members can be reached Monday- Friday between 9am - 8pm EST for online chat or via phone at

Telephone: 1 (904) 436-6540

Terms and ConditionsConditions générales | 諸条件

*˝Like new˝ is defined as clean, undamaged, free of autoclave deposits, stains, scratches, surgical field fluids and materials. We must be able to repackage and sell the item as new.

Certificate of Participationis awarded to

____________________________________

for attending

Presented by Veterinary Orthopedic Implants, Inc.

www.vetimplants.com • 904.436.6540

VOI Representative

Lab/Course/Lecture Presenter

CBLO Technique and Lab

Australia 2018

John P Skills

R.3


Ref

eren

ce |

Réfé

renc

e | 参

照Why VOI?Pourquoi VOI? | VOIを選ぶ理由

Unparalleled Customer Service | Service client sans égal | 比類ないカスタマーサービスVeterinary Orthopedic Implants or VOI, was established as a company and product line in 1992 by owner Claude Gendreau, DVM, DACVS. Although the VOI product lines and sales have grown, we proudly still treat our customers with small company service approach. At VOI, a representative will answer the phone during business hours and be able to assist you with your order or inquiry. A Customer Account Specialist will handle your account, and will be able to respond quickly and efficiently to any and all of your inquiries. Our goal is to make your ordering process as simple and accurate as possible.

99.9% of all orders placed by 4:00 pm EST will be shipped the same day. Orders may be faxed or emailed 24 hours a day.

Value | Valeur | 価値Orders are checked independently by a final audit employee for quality and accuracy prior to shipping. All VOI products are guaranteed to meet specifications and be free of defects in workmanship and materials. Returned products will be replaced or repaired at our discretion provided there is no evidence of misuse.

From “Cut to Close” | De « l’incision à la suture » | 切開から縫合までVOI is proactive in developing and manufacturing new implants to meet our surgeons’ needs. We currently stock well over 15,000 products, including a vast selection of TPLO plates, locking head screws, TTA implants, fracture repair plates, cortical and cancellous screws, and gSource®, Integra-Miltex® and now Aesculap® instruments.

We also offer a wide selection of power equipment for all of your surgical needs - most with limited warranties. VOI will even service your power equipment should it need to be repaired.

In addition, VOI has partnered with DemeTECH® to distribute suture to the veterinary field. DemeTECH® suture is a superior quality suture manufactured in the USA. We stand behind our suture with a 100% satisfaction guarantee.

Education | Éducation | 指導Through worldwide global educational seminars and global demonstration labs, VOI is honored to offer implants, power, instruments and suture for the continued education of Board Certified surgeons. We’ve partnered with some of the most renowned teaching surgeons to teach procedures such as CBLO, TPLO, and fracture repair. In the past several years, VOI has completed over 100 education labs worldwide resulting in over 1,500 trained surgeons mastering CBLO, Advanced Fracture Repair and other orthopedic procedures.

Visit our website for a list of trade shows we will be attending and continued education labs and classes we host or sponsor.

R.4



照

Annual Order ProgramProgramme de commande annuel | 年間注文プログラム

Save hours managing inventory

Interested? Give us a call! We will review your annual purchase history and identify opportunities for you to save through our

ANNUAL ORDER PROGRAM.

Our Customer Account Specialists will provide you with a quote of your estimated 2019 needs - shipping included!

EQUAL MONTHLY PAYMENTSEnjoy regular, equal monthly payments for the duration of your Annual Order Program participation.

> > > R I S K F R E E < < <RETURN anything UNUSED and UNOPENED

for a complete refund* at the end of the program!

*We will credit your account for any unopened and unused product. Opened instruments are completely non returnable. Some restrictions do apply. Talk to your Customer Account Specialist for complete details.

“VOI’s bulk order program has saved me time and money. 2018 will be my sixth year taking advantage of the program. As my mobile surgical practice keeps growing, my time becomes more and more precious. Continuously managing my disposables is no longer something I spend time on. I highly recommend this

program to any surgeon looking to save time and money. It’s truly a no-risk, no brainer.”

DACVS surgeon in Pennsylvania

Save money on shipping costs

Save time in transit

Increase your profitability and efficiencyNOT your time and expenses

so you can focus on growing your practice!

R.5


Ref

eren

ce |

Réfé

renc

e | 参

照Shipping and Delivery ChartCarte d’expédition et de livraison | 納入までの日数早見図

UPS GROUND Transit times from VOI - St. Augustine, FL 32095

FEDEX GROUND Transit times from VOI - St. Augustine, FL 32095

Subject to the Tariff/Terms and Conditions of Service, UPS guarantees on-schedule delivery of packages, shipped via UPS's services, that are listed as guaranteed, or will re-fund your transportation charges. Guaranteed Service is not available in all areas and does not apply to shipments containing a package with an Additional Handling or Large Package surcharge. Scheduled business days and delivery schedules are revised occasionally due to changes in distribution and volume, especially during holiday periods. Ser-vice to some remote areas also may require additional delivery days. For current delivery schedules, service availability and information, and a description of the UPS service Guarantee, see the UPS Rate and Service Guide. The most up-to-date transit time details will be available at ups.com/ctc at the time of shipping. Certain commodities and high value shipments may require additional transit time for customs clearance.

This map illustrates service schedules in business days as of October, 2017 for FedEx Ground shipmentsPlease Note: Packages picked up from a residence may have one additional transit day. For faster returns please drop off at a staffed FedEx location.

For worldwide deliveries, or shipping info from our subsidiaries, please email or call your representative to get a quote or shipping details.

During the holidays, when

carrier volumes are at their peak worldwide,

you may experience delays in shipping times and expedited shipping guarantees will be

waived.

R.6



照

Instrument Care Soin des instruments | 器具のお手入れ

Instrument Care | Soin des instruments | インストゥルメントケアProper care and maintenance will greatly prolong the life of your instruments. Newly purchased instruments must be cleaned, lubricated and autoclaved before use.

Instrument Care Checklist | Liste de contrôle du soin des instruments | 器具のお手入れチェックリスト1) Rinse and soak soiled instruments immediately after use - Thoroughly clean before autoclaving2) Clean, autoclave and sterilize instruments in an open position3) Do not stack or entangle instruments4) Follow the manufacturer’s recommendations when using equipment and cleaning solutions5) Keep instruments properly lubricated6) Inspect instruments regularly

Proper Use | Utilisation appropriée | 適切な使用Instruments are designed for a particular purpose and should be used only for that purpose. Even the stron-gest instrument can be damaged when used inappropriately, such as when scissors are used to cut wire.

Water and Stainless Steel | Eau et acier inoxydable | 水とステンレス鋼Regular tap water contains minerals that can cause discoloration and staining. We recommend using distilled water for cleaning, disinfecting, sterilizing and rinsing. To avoid staining, use a cleaning solution with a pH near neutral (7). Instruments should be placed in distilled water immediately after use. They should never be placed in saline solution, as it may cause corrosion and eventually irreversible damage to the instrument.

Manual Cleaning | Nettoyage manuel | 手動洗浄When handling instruments, be careful not to damage fine tips and mechanisms. If instruments have been exposed to blood, tissue, saline or other foreign matter, they must be rinsed in warm water before these substances are allowed to dry. Failure to do so may cause rusting. After rinsing, immerse them in a cleaning and disinfecting solution.Because many compounds, including certain chemicals, are highly corrosive to stainless steel, rinse and dry instruments immediately if they come into contact with any potentially harmful substances. If no ultrason-ic cleaner is available, clean the instrument very carefully. Pay particular attention when cleaning box locks, serrations, hinges and other hard-to-reach areas. Use nylon (not steel) brushes and warm (not hot) cleaning solutions. Follow the manufacturer's instructions for the preparation of the cleaning solutions. Change these solutions daily.

Ultrasonic Cleaning | Nettoyage par ultrasons | 超音波洗浄Ultrasonic cleaning is the most effective and efficient way to clean instruments. To maximize its effectiveness, instruments should be cleaned of all visible debris before they are placed in an ultrasonic cleaner.

When using ultrasonic cleaners:* Do not mix dissimilar metals, e.g., chrome and stainless, in the same cycle.* Use only designated cleaners.* Open all instruments so ratchets and box locks are accessible.* Whenever possible, disassemble instruments for optimal cleaning.* Avoid piling instruments on top of each other.* Remove and rinse off instruments immediately after the cycle is finished.* Allow instruments to air-dry.* Lubricate all moving parts after cleaning and before sterilization.* Use only lubricants specifically designed for surgical instruments.* Change the ultrasonic cleaning solution daily.

R.7


Ref

eren

ce |

Réfé

renc

e | 参

照Instrument Care Soin des instruments | 器具のお手入れ

Instrument Checkup | Vérification de l’instrument | 器具の点検The best time to review the condition of instruments is after they have been cleaned, lubricated and before sterilization. Check for :

Function“Sharps” must cut cleanly (resharpen if needed) and close properly. Check for burrs along the cutting edges. Needle holders and clamps must engage properly and meet correctly at the tips.SurfaceInspect surfaces for any sign of staining, cracking or other irregularities. Common sources of staining are:

* Inadequate cleaning.* Mixing dissimilar metals.* Impurities in the water.* Unsuitable or improper preparation and usage of cleaning and disinfecting agents.* Noncompliance with operating procedures of cleaning and sterilizing equipment.

Lubrication and Autoclaving | Lubrification et autoclavage | 潤滑剤塗布およびオートクレーブAll instruments must be properly cleaned before autoclaving. Moving parts, such as box locks and hinges, should be well lubricated. Be sure to use surgical lubricants and not industrial oils.

Always sterilize instruments in the open, unlocked position.

We recommend that instruments be wrapped in cloth and then placed in the container, or that a cloth be put on the bottom of the pan to absorb moisture. The cloth should be pH(7) neutral and free of detergent residues.

Please note that chrome-plated instruments may rust if they are not dried and lubricated immediately after sterilization.

Finally, avoid sudden cooling. Instruments should be allowed to air-dry.

Cold Sterilizing or Disinfecting | Stérilisation à froid ou désinfection | 冷滅菌または消毒Prolonged immersion in disinfecting or sterilizing solution can damage surgical instruments. Do not soak instru-ments for longer than 20 minutes. To render the instruments sterile and ready for use, we recommend using an autoclave.

Avoid BAC | Éviter le BAC | BAC使用禁止Instruments with tungsten carbide inserts, such as wire cutters, needle holders and TC scissors, should never be immersed in sterilizing solutions containing benzyl ammonium chloride (BAC). BAC will soften and dissolve the tungsten carbide. Never use bleach as it will cause severe pitting.

Storage | Espace de rangement | 保管Once instruments are thoroughly dry, store them in a clean, dry environment. Never put them in areas where chemicals may emit corrosive vapors or where temperature and moisture variations could cause condensation on the instruments.

For care and warranty of power equipment and implants, please visit www.vetimplants.com.

器具のお手入れ

R.8



照

Locking VS. Non LOCKINGBlocage et sans blocage | ロッキングタイプとノンロッキングタイプ

Benefits of Locking vs. Non Locking Comparaison du blocage et du non blocage | ノンロッキングタイプと比較したロッキングタイプの利点

• In locking plates and screws, the interface between the screw head and the plate attach the plate to the screw compared to non-locking where the screw is pulling the bone up to the plate. As the screw is tightened the bone maintains its position relative to the plate and is not drawn up to it. The screw head engages with the plate.

• Locking plates do not have to be perfectly contoured to the bone.• The “pull-out” mode of failure is not applicable to locking screws. Locking screws are made with a smaller

thread profile and larger core diameter. This results in increased mechanical strength and integrity over comparably sized cortex screws.

Difference between “single threaded” and “double threaded” ImplantsDifférence entre les implants à filetage unique et double | 「シングルスレッド」インプラントと「ダブルスレッド」インプラントの違い

• The inside thread of a single threaded plate has one thread and the inside thread of a double threaded plate has twice as many threads.

• The benefit of having twice as many threads leaves less chance of stripping compared to single threaded and engages faster with your initial turn than single threaded.

• The double threaded stardrive recess provides automatic screw retention without the need for an addi-tional screw holding mechanism.

• The double threaded stardrive recess allows a smaller screw head and allows the screw head to sit flush with the plate.

• Single threaded locking screws available in 1.5, 2.7, and 3.5.• Double threaded locking screws available in 1.5, 2.0, 2.4, 2.7, 3.5, 4.0 and 5.0.• Double threaded locking screws are available in hex or star. You could substitute star screws for hex in

double threaded to utilize existing hex drivers.

Screw Angle and the PlateInclinaison de la vis et de la plaque | スクリュー角度とプレート

• In order to fit and lock into the plate, the screw must be inserted at a fixed angle relative to the hole of the plate with a locking drill guide.

• It is not always desirable that the screws are at 90 degrees to the plate. The angle of the screw is dictated by the plate.

• The attachment of the screw to the plate gives any locking construct a high degree of angular rigidity relative to a DCP construct. To achieve the same rigidity as a DCP construct, the locking construct needs less screws (which can be interpreted as less time and money which can offset the higher cost of locking implants).

R.9


Ref

eren

ce |

Réfé

renc

e | 参

照Screw HEad ReferenceRéférence de tête de vis | スクリューヘッド早見図

Screw Head ProfilesCRUCIFORM - HEX - STAR

CRUCIFORM HEADAvailable in the following Cortical Screw sizes:Stainless Steel Cortical Screws (Regular and Self-Tapping)

• REG 1.5, REG 2.0, REG 2.4 • ST 1.0, ST 1.5, ST 2.0, ST 2.4

Titanium Cortical Screws (Regular and Self-Tapping) • TI REG 1.5, TI REG 2.0, TI REG 2.4 • TI ST 2.0, TI ST 2.4

HEX HEADAvailable in the following Cortical Screw sizes:Stainless Steel Cortical Screws (Regular and Self-Tapping)

• REG 2.7, REG 3.5, REG 4.5, REG 5.5• ST 2.7, ST 3.5, ST 4.5• LH ST 1.5, LH ST 2.7, LH ST 3.5, LH ST 4.0, LH ST 4.2• L ST/L ST+ 2.7, L ST/L ST+ 3.5

Titanium Cortical Screws (Regular and Self-Tapping) • TI REG 2.7, TI REG 3.5• TI ST 2.7, TI ST 3.5• T2.7• T2.0T, T2.4T, T2.7T

Available in the following Cancellous Screw sizes:Stainless Steel Cancellous Screws

• 2.0 CT, 3.0 CT, 4.0 CT• CAN 3.0, CAN 3.5, CAN, 4.0• ST CAN 3.0, ST CAN 3.5, ST CAN 4.0• CPT4.0, CPT6.5

• CPTL 6.5• 1.5, 2.0, 2.4• 1.5T, 2.0T, 2.4T• HLH 3.5 (Double Threaded)• F in 1.9, 2.5, 3.0 and 3.5 (Fixin® compatible)

Titanium Cancellous Screws• TI CAN 4.0

STAR HEAD:Available in the following Cortical Screw sizes:Stainless Steel (double threaded)

• S ST 1.5, S ST 2.0, S ST 2.4, S ST 2.7, S ST 3.5 • SLH ST 1.5, SLH ST 2.0, SLH ST 2.4, SLH ST 2.7, SLH ST 3.5,

SLH ST 4.0, SLH ST 4.5Titanium Cortical and locking head Screw sizes

• T SLH ST 3.5 (Double Threaded)• 05.16.XX 1.5 RU-6 (Cortical Thread) • 05.15.XX 2.4 RU-6 (Cortical Thread)• 05.26.XX 2.4 RU-10 (Cortical Thread)• 05.25.XX 3.2 RU-10 (Cortical Thread)• 05.36.XX 2.7 RU-10 (Cortical Thread)• 05.35.XX 4.0 RU-10 (Cortical Thread)

Available in the following Cancellous Screw sizes:Stainless Steel Cancellous Screws

• CCS 2.4, CCS 3.0, CCS 4.5

REG: Regular (rounded end of shaft)ST: Self-tapping (cutting flutes at the end of shaft)CAN: Cancellous full threadST CAN: Self-tapping cancellous full threadCPT: Cancellous partial threadCPTL: Cancellous partial thread longerCCS: Countersink (headless) compression screwLH ST: Locking hex head (single thread) self-tapping

L ST: New England style locking self-tappingS ST: Star head self-tappingSLH ST: Star locking head self-tapping (double threaded)TI: TitaniumT: Titanium or self-tappingRU: Recess of head - titanium HLH ST: Hex locking head self-tapping (double threaded)F: Autolocking Screws - Fixin® compatible

VOI Screw Code KeyCode de vis VOI | VOIスクリューコードキー

Locking Head ProfilesL ST - LH ST - HLH ST - SLH ST

New England Locking

Single Threaded

Double Threaded

HEX STAR

R.10



照

VETERINARY ORTHOPEDIC IMPLANTS - Quick reorder form

[email protected] 904.436.6546 904.436.6540

Contact Information (Please fill out entirely) Date:________________

Customer Number:______________________PO Number (if applicable)___________________________

Name of Practice/Hospital:_________________________________________________________________

Order placed by:_________________________________Phone Number:__________________________

Email address for order confirmation:_________________________________________________________

Ship-To Address:_________________________________________________________________________

City:_________________________________________________ State:____________ Zip:_____________

Bill-To/Mailing Address (If different from above):_________________________________________________

City:_________________________________________________ State:____________ Zip:_____________

Shipping Method - Select One

❍ Next Day Early AM* ❍ Next Day AM ❍ Next Day PM ❍ 2 Day AM* ❍ 2 Day PM ❍ 3 Day ❍ Ground *Additional chargers will apply for expedited shipping methods and Saturday delivery. Not available in all areas.

Payment Method

Credit Card Type (please check): ❍ Visa ❍ MasterCard ❍ Discover ❍ American Express

Credit Card Number:___________________________EXP Date:____________ CVV Number:________

Name as it appears on the Credit Card:______________________________________________________

We appreciate your business. Servicing our customers is our highest priority. Please let us know how we can be of service to you!

PRODUCT CODE PRODUCT DESCRIPTION QTY PRICE

Documents

2019...• Pre-contoured Locking Carpal Arthrodesis Plates 904.436.6540 email: [email protected] Over 25 Years of delivering the widest selection of veterinary orthopedic implants,