2018 - TELL · The devices of TELL appear in many fields of both private and business sectors. We supply our partners with well-scalable systems, which open up the opportunity for

GSM COMMUNICATORS

2G/3G/IP COMMUNICATORS

GSM AUTOMATION

IP-BASED REMOTE MONITORING RECEIVERS

ALARM MONITORING SOFTWARE

PERSONAL MONITORING SYSTEM

GPS-BASED TRACKING SYSTEM

ACCESSORIES

2018

REMOTE MONITORING ANDREMOTE CONTROL SOLUTIONS

TELL came out with its very first GSM-based productRelease of the First TELL Product – a GSM Communicator

A remote monitoring system with 2800 end-point devices was developed for Magyar Posta

A GPS-based fleet management system was developed and released

Development of a GPRS-Based Remote Monitoring System

Magyar Posta (Hungarian Post Office) Project

Website of the Year Award

Development of GSM Automation Products

Introduction of easyTRACK

SMD-based own production was launched.Start of Own Production (Debrecen, HQ of TELL)

Emergency call system

T.E.L.L. Műszaki Fejlesztő Kft. was founded, our office in Budapest opened

easyTRACK became available for Android

Integration of IP-based cameras, introduction of smartphone platforms

https://info.easytrack.hu

New, innovative, IP- and 3G-based product series released on the domestic and foreign markets

E-mail, Push notification, IP camera support

Market Release of GPRS easyAID

TELL Group Expansion (Hungary)

Mobile Application

Release of New Product Features

New 3G/IP-Based Product Palette

Renewed Product Range

GPS-based Taxi Booking System (Dubai, United Arab Emirates)

T.E.L.L. Rendszerszolgáltatások Kft. joined the E-Toll System as a Toll Declaration Operator and has been providing full-scaleservices for e-toll based declaration ever since

A countrywide fire report reception system was developed for theNational Directorate General for Disaster Management, Ministry ofthe Interior

Entrepreneur of the Year Award

E-Toll Declaration

OKF projekt (Hungary)

Prima Primissima Award (Hajdú-Bihar County, Hungary)

Upgraded Mobile Applications

Introduction of 3G-Based Technology

TELL Group Expansion (Hungary)T.E.L.L. Biztonságtechnikai Rendszerek Kft. was founded

T.E.L.L. Rendszerszolgáltatások Kft. was foundedTELL Group Expansion (Hungary)

T.E.L.L. Security Systems S.R.L. was founded

TELL Group Expansion (Romania)

2000

2006

2007

2009

2011

2012

2013

2014

2015

2016

2017

JULY

JULY

JULY

JULY

OCT

SEPT

OCT

SEPT

DEC

GSM COMMUNICATORS

Compact GSM II 6ecoLINE GSM II 7GSM Adapter MINI 8

TMS Light 28TMS Pro 29

AlarmTrack 30

IP Camera Detector 30

GPRS easyAID 32GSM easyAID 33

easyTRACK II BASE 36easyTRACK II FULL 36

Quectel UC20 Mini PCIe 3G modem 38

Quectel EC25 Mini PCIe 4G modem 38

easyAID IQRF transmitter 38CAN Adapter 39Diesel Sensor 39easyFCL 40easyRPM Monitor II 40easyRFID 41easyTEMP 41easyTEMP Compact 41GSM 2J-300 antenna 42DUALCOM SIA IP KIT

metal case + power supply 42EXT24-D 42Terminal blocks 43

Adapter2 10Adapter2 PRO 10DUALCOM SIA IP 12DUALCOM SIA IP KIT 12ecoLINE SIA IP 13IP Bridge 14IP Bridge PRO 14Pager4 16Pager4 PRO 17Pager7 18

TELLMon 26GSM Gate Control 20 20GSM Gate Control PRO 20 20GSM Gate Control BASE 1000 21GSM Gate Control PRO 1000 21

SOFTWAREPERSONAL MONITORING SYSTEM

GPS-BASEDTRACKINGSYSTEM ACCESSORIES

2G/3G/IP COMMUNICATORS GSM AUTOMATION

IP-BASED REMOTEMONITORINGRECEIVERS

01

05 06 07 08

02 03 04

TELL KFT.

The dynamically expanding TELL corporate group is proud to have four companies in Hungary now and one subsidiary in Romania. More than 100 colleagues and a trustworthy subcontractor sys-tem ensure that the manufacturing, developing and service-providing standards of TELL can take aim at reaching the highest possible level.

The main profile of the parent company, T.E.L.L. Software Hungária Kft., continues to be develop-ment and manufacturing, within the framework of which mostly products based on mobile communi-cation and IP technology are being realized.

The devices manufactured by TELL are dis-tributed and placed on the Hungarian market by T.E.L.L. Biztonságtechnikai Rendszerek Kft. (T.E.L.L. Security Systems Ltd.) through its in-land sales team.

The third pillar of the corporate group is T.E.L.L. Rendszerszolgáltatások Kft. (T.E.L.L. System Services Ltd.), providing complex fleet manage-ment services via easyTRACK, a tracking system developed by our own company, now to the sat-isfaction of nearly 2,500 companies of logistics and commerce.

TELL pays particular attention to adaptation to ever-changing customer requirements, there-fore its developments are carried out in line with these demands. In order to be able to meet these requirements, another member has been added to the corporate group.

As from 2016, with the active participation of T.E.L.L. Műszaki Fejlesztő Kft. (T.E.L.L. Tech-nical Development Ltd.) developments can

proceed at a quicker pace and individual cus-tomer requirements can be met with greater efficiency.

The devices of TELL appear in many fields of both private and business sectors. We supply our partners with well-scalable systems, which open up the opportunity for satisfying a wide range of demands, from one-site remote mon-itoring stations to complex multi-site remote monitoring service-providers even covering several regions of our country. Our product-of-fers include all system elements necessary for providing remote monitoring services, from end-point devices to the receiving software.

Thanks to continuous development and business activities, TELL products are already present in more than 30 countries. A great number of small and medium-sized domestic and interna-tional companies, as well as several expressly great organizations warrant that our systems are essential chains of company resource man-agement and provide effective support for the monitoring, controlling and logistical tasks of different technical solutions.

A decade of experience in development and manufacturing, as well as the strive for contin-uous renewal serve as a guarantee for our cus-tomers to get innovative and reliable solutions of a high technical standard.

Our enterprise is open to implementing the in-dividual needs of its partners. The flexible, in-novative product development and the careful technical support on our side provide a solid basis for long-term cooperation.

GSM COMMUNICATORS

Compact GSM II 6ecoLINE GSM II 7GSM Adapter MINI 8

01

TECHNICAL SPECIFICATIONTransmission channel GSM

Frequency band 850/900/ 1800/1900 MHz

Operating temperature -20 °C – +70 °C

Supply voltage 9-30V DC

Current consumption (maximum)

200 mA @ 12V DC

Current consumption (nominal)

50 mA @ 12V DC

Casing PCB + metal case

Terminal connector design

Mounted on the panel

Dimensions 100x70x19 mm

Weight 80 g

Contact controlled communicator, which can be used as an optional reporting device for alarm control panels, for reporting states of switches or outputs by call and SMS, or for remote control through relay outputs. Free gate opening function, optional temperature measuring and control.

Compact GSM II

• GSM communication• 2 NO/NC contact inputs• 2 NO relay outputs• Possibility to connect temperature sensor

(easyTEMP Compact)• Programming by using software through

USB or modem connection, or by SMS• Reporting to monitoring station

with Contact-ID protocol• SMS sending with configurable

message• Events:

– alarm on the 2 inputs – temperature threshold alarms (optional) – temperature sensor supervision (optional) – low voltage alarm – periodic test report

• Control of relay outputs (monostable/bistable): – by input events – by phone call for free – by temperature events (optional)

• Car alarm adaptation (monitoring of rhythmical regular impulses)

MAIN FEATURES

Compact GSM II

PARAMETERSContact inputs 2

Configurable inputs (NO/NC)

Adjustable input sensitivity

Relay outputs 2

Output control through free GSM call

Output control by SMS

GSM voice call

SMS sending

DTMF-based reporting to CMS

SIA DC-05 (DTMF) protocol

Programming method USB / GSM datacall ( CSD) / SMS

Programming software

User phone numbers for forwarding incoming SMS messages 1

User phone numbers for reporting 4

User phone numbers for output control 4 / Unlimited

Monitoring station phone numbers 1

Individual reporting to monitoring station

Configurable internal Contact ID event codes

Security password

Caller identification

Possibility to connect temperaturesensor (easyTEMP)

Individual SMS sending to user phonenumbers with predefinable message

Temperature monitoring and interventionthrough the outputs (optional)

Periodic test report

Alarm sending to user phone numbers with siren tone being used

Alarm restriction

Recordable voice message sending touser phone numbers Yes / 2 x 6 sec

Selectable confirmation request from userphone numbers

6 | www.tell.hu

PARAMETERSDTMF-based reporting to CMS


Programming method Using a phone device

User phone numbers for forwarding incoming SMS messages 1

Voice dialer adaptation

Phone line emulation

Adaptation of alarm control panels to mobile network

TECHNICAL SPECIFICATIONTransmission channel GSM

Frequency band 850/900/ 1800/1900 MHz

Operating temperature -20 °C – +70 °C



400 mA @ 12V DC


110 mA @ 12V DC





Weight 80 g

Communicator for alarm control panels, wich can be used as a universal GSM adapter for alarm sytems, as a GSM line simulator, or for substituting a landline.

ecoLINE GSM II

• GSM communication• 1 telephone line output• Forwarding of incoming SMS messages• Push-button for GSM signal indication

MAIN FEATURES

ecoLINE GSM II

www.tell.hu | 7

GSM COMMUNICATORS 01


SMS sending



Programming method USB


User phone numbers for forwardingincoming SMS messages 2

User phone numbers for reporting 2

Automatic dialing (emergency call)

Voice dialer adaptation

Contact ID event code filtering


PSTN line supervision

Remote programming of alarm control panels through GSM data call (CSD / BELL103)

Generates SMS from Contact ID eventcodes and sends to user phone numbers



TECHNICAL SPECIFICATIONTransmission channel GSM / PSTN

Frequency band

850/900/ 1800/1900 MHz

Operating temperature -20 ºC – +70 ºC

Supply voltage 9-30V AC/DC


500 mA @ 12V DC


100 mA @ 12V DC

Casing Plastic


Connectable


Weight 200 g

The adapter enables installing an alarm system where no landline is available, but reporting to a monitoring station is required.

A general emergency signaling device for elderly people and people in need of nursing, activated by simply picking up the receiver of the connected landline phone device.

GSM Adapter MINI

• Telephone line emulator• PSTN line management• BELL103 / V.21 modem simulation• Programmable through USB• Adaptation of alarm control panels to

monitoring station via GSM network, through Contact ID protocol

• SMS sending to users from Contact-ID event codes reported by the connected alarm control panel

• Security backup (backup reporting) besides existing landline communicators

• Phone line adapter for apartments and holiday houses

• Remote diagnostics of connected alarm control panels

MAIN FEATURES

GSM Adapter MINI

8 | www.tell.hu

2G/3G/IP COMMUNICATORS

Adapter2 10Adapter2 PRO 10DUALCOM SIA IP 12DUALCOM SIA IP KIT 12ecoLINE SIA IP 13

IP Bridge 14IP Bridge PRO 14Pager4 16Pager4 PRO 17Pager7 18

02

The adapter enables installing an alarm system where no landline is available, but report-ing to a monitoring station is required.

A general emergency signaling device for elderly people and people in need of nursing, activated by simply picking up the receiver of the connected landline phone device.

The adapter enables installing an alarm system where no landline is available, but reporting to a monitoring station is required.A general emergency signaling device for elderly people and people in need of nursing, activated by simply picking up the receiver of the connected landline phone device.

Adapter2

Adapter2 PRO

• 2G/3G communication• Telephone line emulator• Programmable through USB and IP• TEX, TELLMon, SIA IP protocol support• 4 configurable NO/NC inputs• 1 NO relay output controllable by events• Reporting to up to 4 monitoring stations at the same time• 4 user phone numbers for sending SMS notifications• Notification through SMS about events (even by partition or zone)• Remote firmware update• Configurable Contact ID codes for each input and service event• Detailed event log• E-mail sending• Push notification• Multiplatform mobile application (iOS, Android)

• 2G/3G communication• Phone line emulator• Programmable through USB and IP• TEX, TELLMon, SIA IP protocoll support• 4 configurable NO/NC inputs• 1 NO relay output controllable by events• Reporting to up to 4 monitoring stations at the same time• 4 user phone numbers for sending SMS notifications• Notification through SMS about events (even by partition or zone)• Remote firmware update• Configurable Contact ID codes for each input and service event• Detailled event log

MAIN FEATURES

MAIN FEATURES

PROMOBILE APPLICATION

TELL CONTROL CENTER

10 | www.tell.hu

Comparison chart of Adapter2 models

TECHNICAL SPECIFICATION Adapter2 – 2G.IN4.R1 Adapter2 – 3G.IN4.R1* Adapter2 PRO – 2G.IN4.R1 Adapter2 PRO – 3G.IN4.R1*

Frequency band 850/900/1800/1900 MHz @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

850/900/1800/1900 MHz @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

Transmission channel 2G / GSM 3G / 2G / GSM 2G / GSM 3G / 2G / GSM

Operating temperature -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC

Supply voltage 12-24 VDC 12-24 VDC 12-24 VDC 12-24 VDC

Current consumption (maximum) 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC

Current consumption (nominal) 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC

Casing Plastic Plastic Plastic Plastic

Terminal connector design Connectable Connectable Connectable Connectable

Dimensions 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm

Weight 200 g 200 g 200 g 200 g

PARAMETERSContact inputs 4 4 4 4



Relay outputs 1 1 1 1

Output activation on GSM fault

GSM voice call

SMS sending

E-mail sending – –

Push notification – –

IP-based reporting to CMS


SIA IP DC-09 protocol


TELLMon protocol

TEX protocol

Programming method USB / IP USB / IP USB / IP USB / IP


User phone numbers for forwardingincoming SMS messages 1 1 1 1

User phone numbers for reporting 4 4 4 4

Monitoring station IP addresses 4 4 4 4



Automatic dialing (emergency call)


Event logs / number of stored events Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000


Generates SMS from Contact ID eventcodes and sends to user phone umbers


NTP server support


Mobile application – –

Adapter2 – 2G.IN4.R1

Adapter2 – 3G.IN4.R1

Adapter2 PRO – 2G.IN4.R1

Adapter2 PRO – 3G.IN4.R1

* For the 3G devices 3GA models are also available. Details at: www.tell.hu.

2G/3G/IP COMMUNICATORS 02

www.tell.hu | 11

TECHNICAL SPECIFICATIONDual GSM (2 independent GSM modules)

Yes

Transmission channel 2G / GSM

Frequency band

850/900/1800/1900 MHz @ GPRS


Supply voltage 9-30 VDC


400 mA @ 12 VDC, 200 mA @ 24V DC


70 mA @ 12V DC, 40 mA @ 24V DC

Casing None (PCB)




Weight 280 g

Communicator for fire alarm control panels that converts contact input events to SIA IP, TELLMon or TEX-MVP format and sends them to the alarm monitoring receiver through IP channel on mobile GPRS network.

It can be used for any control panel which has contact outputs or the contact outputs can be obtained with relays. Using this device, the input events are sent to the monitoring station’s IP receiver over the GPRS network, using SIA IP protocol based on ANSI/SIA DC-09-2007 standard, TELLMon or TEX-MVP protocol.

Due to the application of duplicated phone modules, the DUALCOM SIA IP guarantees a high security level. Therefore, it is suitable for high risk signal transmission applications (e.g. transmission of fire alarm events).

DUALCOM SIA IP



EOL inputs


Relay outputs 6



TELLMon protocol

TEX protocol

Programming method USB / IP


Monitoring station IP addresses 4



Built-in internal clock

Dual SIM management

• Contact controlled communicator• GPRS communication• SIA IP, TELLMon and TEX-MVP protocol• Parallel usage of two independent GSM modems• Communicates directly with the receivers• Reporting to up to 4 IP addresses, meaning

2 primary IP addresses per network • 6 NO/NC/EOL contact inputs• 6 configurable relay outputs• Supervision message with configurable interval

of sending for automatic supervision of transmission channels

• No need for a central server, only an IP receiver with Internet connection is necessary. The device works with TELLMon, TEX-MVP and other receivers that support the SIA IP protocol specified above.

• Possibility to separate e.g. alarm events and technical events (send alarm events only to the alarm monitoring station, and technical events only to the technical monitoring station).

MAIN FEATURES

DUALCOM SIA IP with metal housing and 230V/9-14VDC 1.5A switching power supply

DUALCOM SIA IP KIT

DUALCOM SIA IP

DUALCOM SIA IP KIT

12 | www.tell.hu

PARAMETERSGSM voice call

SMS sending



TELLMon protocol


Programming method USB / SMS


User phone numbers for forwardingincoming SMS messages 1

Monitoring station IP addresses 4




TECHNICAL SPECIFICATIONTransmission channel 2G / GSM

Frequencyband

850/900/1800/ 1900 MHz @GSM/GPRS




400 mA @ 12V DC


80 mA @ 12V DC





Weight 80 g

Communicator for alarm control panels that converts DTMF-based Contact ID messages to SIA IP format and sends them towards monitoring receivers through IP channel.

Can be used with any alarm system which is able to report to monitoring station in Contact ID format using PSTN landline.

There is no need for a central server, only an IP receiver with Internet connection is necessary. The adapter is able to communicate with receivers which support the SIA IP protocol.

ecoLINE SIA IP

• GPRS/IP, GSM communication• Direct communication with TELLMon and SIA IP

receivers through IP• Direct communication with DTMF receivers

through backup GSM call • SIA IP and TELLMon protocol• 1 telephone line output• Forwards incoming SMS messages• The programming software is available

on the built-in USB storage• The IP addresses and other settings can

be configured by SMS or PC

MAIN FEATURES

ecoLINE SIA IP


www.tell.hu | 13

Complex communicator, wich offers a solution for connecting alarm systems to monitoring stations. It can be used as a standalone reporting device, or even as an IP-based control device. IP Bridge makes it possible to remotely configure alarm control panels and assures communication between devices with RS232 interface over the Internet.

Beyond the functionalities of the standard model, the PRO model can be used in IT systems for router supervision, or as an IP-based control device with IP camera support.

IP Bridge

IP Bridge PRO

• Simulated phone line output• 6 NO/NC (configurable) contact inputs• 6 NO (open in default) relay outputs• 1 RS232 input• 1 Ethernet connector• 1 USB host• 3G modem (3G models)• Wired Internet / 3G-based IP communication• TEX / TELLMon / SIA IP protocol support

• Transparent serial port support• E-mail sending• Radius server support• NTP server support• HTTP/HTTPS protocol support• Built-in web server for configuration

MAIN FEATURES

PRO

MOBILE APPLICATION

MOBILE APPLICATION

TELL CONTROL CENTER

TELL CONTROL CENTER

14 | www.tell.hu

Comparison chart of IP Bridge models

TECHNICAL SPECIFICATION IP Bridge – IN6.R6 IP Bridge – 3G.IN6.R6* IP Bridge PRO – IN6.R6 IP Bridge PRO – 3G.IN6.R6*

Transmission channel LAN 3G / 2G / LAN LAN 3G / 2G / LAN

Frequency band – 900/2100 MHz @UMTS, 900/1800 @GSM/GPRS – 900/2100 MHz @UMTS,

900/1800 @GSM/GPRS

Operating temperature -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC

Supply voltage 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC

Current consumption (maximum) 400 mA @ 12 VDC 400 mA @ 12 VDC 400 mA @ 12 VDC 400 mA @ 12 VDC

Casing Plastic Plastic Plastic Plastic

Dimensions 130x69x19 mm 130x69x19 mm 130x69x19 mm 130x69x19 mm

Weight 200 g 200 g 200 g 200 g

PARAMETERS

Contact inputs 6 6 6 6


EOL inputs


Relay outputs 6 6 6 6

E-mail sending

Push notification

VoIP voice call

VoIP SMS sending



TELLMon protocol

TEX protocol

Programming method IP IP IP IP

Monitoring station IP addresses 6 6 6 6



Security password


Event logs / number of stored events Yes / 1200 Yes / 1200 Yes / 1200 Yes / 1200

Mobile application

Individual email sending with predefinable message



Alarm sending to user phone numbers with siren tone being used

Alarm restriction

Recordable voice message sending touser phone numbers

Generates SMS from Contact ID eventcodes and sends to user phone numbers


NTP server support

RADIUS server support

Transparent serial port support

Router supervision – –

IP camera support – –


IP Bridge – IN6.R6

IP Bridge – 3G.IN6.R6

IP Bridge PRO – IN6.R6

IP Bridge PRO – 3G.IN6.R6


www.tell.hu | 15

Contact controlled communicator, which can be used as an optional reporting device for alarm control panels, as a standalone GSM reporting device, or as a 4/6-zone alarm control device with arming and disarming option.

Pager4

Comparison chart of Pager4 models

TECHNICAL SPECIFICATION Pager4 – 2G.IN4.R2 Pager4 – 2G.IN6.R1 Pager4 – 3G.IN4.R2* Pager4 – 3G.IN6.R1* Pager4 PRO – 2G.IN4.R2 Pager4 PRO – 2G.IN6.R1 Pager4 PRO – 3G.IN4.R2* Pager4 PRO – 3G.IN6.R1*

Transmission channel 2G / GSM 2G / GSM 3G / 2G / GSM 3G / 2G / GSM 2G / GSM 2G / GSM 3G / 2G / GSM 3G / 2G / GSM


850/900/1800/1900 MHz @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

850/900/1800/1900 MHz @GSM/GPRS

850/900/1800/1900 MHz @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

Operating temperature -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC

Supply voltage 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC

Current consumption (maximum) 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC

Current consumption (nominal) 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC

Casing Plastic Plastic Plastic Plastic Plastic Plastic Plastic Plastic

Terminal connector design Connectable Connectable Connectable Connectable Connectable Connectable Connectable Connectable

Dimensions 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm

Weight 200 g 200 g 200 g 200 g 200 g 200 g 200 g 200 g

PARAMETERS

Contact inputs 4 6 4 6 4 6 4 6

Configurable inputs (NO/NC) 4 6 4 6 4 6 4 6


Relay outputs 2 1 2 1 2 1 2 1


Output control with commands through GSM voice call



GSM voice call

SMS sending

E-mail sending – – – –

Push notification – – – –





TELLMon protocol

TEX protocol

Programming method USB / IP USB / IP USB / IP USB / IP USB / IP USB / IP USB / IP USB / IP


User phone numbers for forwardingincoming SMS messages 1 1 1 1 1 1 1 1

User phone numbers for reporting 10 10 10 10 10 10 10 10

User phone numbers for output control 10 10 10 10 10 10 10 10

Monitoring station IP addresses 4 4 4 4 4 4 4 4

Monitoring station phone numbers 2 2 2 2 2 2 2 2



Security password


Event logs / number of stored events Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000


Mobile application – – – –



Alarm restriction

Alarm control panel function (arming/disarming, entry and exit delay)

Selectable 24h zones


NTP server support

• 3G modem (3G models)• 4/6 configurable NO/NC inputs• 2/1 NO relay outputs controllable by events

and also remotely• Sends SMS with configurable message for each

event to up to 10 phone numbers• Voice call to up to 10 phone numbers with up

to 15 recordable messages of 10 seconds each• Extended service events• Reporting to CMS over the Internet to up to

4 IP addresses with SIA IP DC-9, TELLMon or TEX protocol

• Up to 10 notification templates can be created and assigned to events in order to configure the priorities of reporting channels used for reporting to CMS

• Configurable Contact ID event codes for each event including partition and zone options

• Output Control can be customized separately for each event using different operation modes

MAIN FEATURES

Pager4 – 3G.IN6.R1




Pager4 PRO – 2G.IN6.R1




* For the 3G devices 3GA models are also available. Details at: www.tell.hu.16 | www.tell.hu

Contact controlled communicator, which can be used as an optional reporting device for alarm control panels, as a standalone GSM reporting device, or as a 4/6-zone alarm control device with arming and disarming option.

Pager4 PRO

Comparison chart of Pager4 models

TECHNICAL SPECIFICATION Pager4 – 2G.IN4.R2 Pager4 – 2G.IN6.R1 Pager4 – 3G.IN4.R2* Pager4 – 3G.IN6.R1* Pager4 PRO – 2G.IN4.R2 Pager4 PRO – 2G.IN6.R1 Pager4 PRO – 3G.IN4.R2* Pager4 PRO – 3G.IN6.R1*

Transmission channel 2G / GSM 2G / GSM 3G / 2G / GSM 3G / 2G / GSM 2G / GSM 2G / GSM 3G / 2G / GSM 3G / 2G / GSM


850/900/1800/1900 MHz @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

850/900/1800/1900 MHz @GSM/GPRS

850/900/1800/1900 MHz @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

Operating temperature -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC

Supply voltage 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC 12-30 VAC/DC

Current consumption (maximum) 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC

Current consumption (nominal) 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC

Casing Plastic Plastic Plastic Plastic Plastic Plastic Plastic Plastic

Terminal connector design Connectable Connectable Connectable Connectable Connectable Connectable Connectable Connectable

Dimensions 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm

Weight 200 g 200 g 200 g 200 g 200 g 200 g 200 g 200 g

PARAMETERS

Contact inputs 4 6 4 6 4 6 4 6

Configurable inputs (NO/NC) 4 6 4 6 4 6 4 6


Relay outputs 2 1 2 1 2 1 2 1





GSM voice call

SMS sending

E-mail sending – – – –

Push notification – – – –





TELLMon protocol

TEX protocol

Programming method USB / IP USB / IP USB / IP USB / IP USB / IP USB / IP USB / IP USB / IP


User phone numbers for forwardingincoming SMS messages 1 1 1 1 1 1 1 1

User phone numbers for reporting 10 10 10 10 10 10 10 10

User phone numbers for output control 10 10 10 10 10 10 10 10

Monitoring station IP addresses 4 4 4 4 4 4 4 4

Monitoring station phone numbers 2 2 2 2 2 2 2 2



Security password


Event logs / number of stored events Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000 Yes / 1000


Mobile application – – – –



Alarm restriction




NTP server support


TELL CONTROL CENTER


www.tell.hu | 17

Contact controlled communicator, which can be used as a standalone alarm control device, for assuring guard-ing tasks with monitoring option through cameras, as an optional reporting device for alarm control panels, as well as in the field of building engineering and agricul-ture (for controlling based on sensor information).

Pager7

• 2G / 3G communication• TELLMon / SIA IP protocol support• 4/6 configurable NO/NC zone inputs• 2/1 NO relay outputs: controllable

remotely and by events• Independent alarm function

(arming, disarming, entry and exit delay, 24h zones, adjustable input sensitivity)

• Configurable Contact ID event codes for every input and custom event

• E-mail sending• Configurable event-action pairs• Active dashboard with active tiles

configurable at will• Assigning surveillance cameras

to zones and in case of alarm displaying camera images and recording them

• Multiplatform desktop application (Windows, Linux, MacOS)

• Multiplatform mobile application (iOS, Android)

MAIN FEATURES Comparison chart of Pager7 models

TECHNICAL SPECIFICATION Pager7 – 3G.IN4.R2* Pager7 – 3G.IN6.R1*

Transmission channel 3G / 2G / GSM 3G / 2G / GSM

Frequency band 900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

900/2100 MHz @UMTS, 900/1800 @GSM/GPRS

Operating temperature -20 ºC – +70 ºC -20 ºC – +70 ºC

Supply voltage 9-30 VDC 9-30 VDC

Current consumption (maximum) 500 mA @ 12 VDC 500 mA @ 12 VDC

Current consumption (nominal) 120 mA @ 12 VDC 120 mA @ 12 VDC

Casing Plastic Plastic

Terminal connector design Connectable Connectable

Dimensions 84x72x32 mm 84x72x32 mm

Weight 200 g 200 g

PARAMETERS

Contact inputs 4 6



Relay outputs 2 1




GSM voice call

SMS sending

E-mail sending

Push notification



TELLMon protocol

Programming method USB / IP USB / IP


User phone numbers for forwardingincoming SMS messages 4 4

User phone numbers for reporting 8 8

User phone numbers for output control 8 / Unlimited 8 / Unlimited

Monitoring station IP addresses 4 4




Security password

Event logs / number of stored events Yes / 1000 Yes / 1000


Possibility to connect temperature sensor (easyTEMP)

Mobile application

Individual email sending with predefinable message

Individual SMS sending to user phone numbers with predefinable message

Temperature monitoring and intervention through the outputs (optional)


Alarm restriction




NTP server support

IP camera support





MOBILE APPLICATIONTELL PAGER CONTROL

18 | www.tell.hu

GSM AUTOMATION

GSM Gate Control 20 20GSM Gate Control PRO 20 20GSM Gate Control BASE 1000 21GSM Gate Control PRO 1000 21

03

Control of automated gates, garage doors and barriers by mobile phone without a remote control. No radio interference or gate opened by accident. Possibility for adding up to 20 users. No control distance limits!

Control of automated gates, garage doors and bar-riers by mobile application over the Internet, or by GSM call. If position limit switches are installed, the opened/closed state of the gate can be viewed in the mobile application and the device can also send notification by SMS or Push if the gate fails to open or close. Possibility for adding up to 20 users with configurable permissions (e.g. restriction of access beyond labour hours). Stores last 1200 events with identification of users and time of control. No control distance limits!

GSM Gate Control 20

GSM Gate Control PRO 20

PRO

• Remote control of automated gates, barriers or other controllable electric devices by free GSM call

• Control of 2 different gates using caller identification and by hiding the caller ID

• Possibility to register up to 20 users• Forwards the gate control panel’s fault reports

or other contact events by SMS using 2 contact inputs

• SMS sending limit

• Forwards incoming SMS messages (for usage with prepaid SIM cards)

• Programming and status query by SMS

• Controlling automated gates and barriers via smartphone application or GSM call

• Option for controlling two different gates or barriers with the same device

• 20-user variant• Notification sending if the gate or barrier fails

to open or close• Showing the open/closed status of the gates

or barriers in the smartphone application• Status reporting of 4 contact inputs via e-mail,

SMS or call

• Transmits doorbell activity to mobile phone• ONVIF camera support, makes camera pictures

available in the smartphone application• Configurable user permissions and entry

periods• Configurable automatic timed controls• Event log and report sending in e-mail

MAIN FEATURES

MAIN FEATURES

MOBILE APPLICATION

GATE CONTROL

20 | www.tell.hu

• Control of automated gates and barriers with free GSM call using caller identification

• Notification about malfunctions of the gate by SMS: – blocking of the photocell – forced opening of the barrier housing – barrier arm or gate jam

• Control can be performed only from authorized phone numbers configured in the device, or from any phone number without limitations, depending on the settings

• Selectable control mode, depending on the type of the gate

• Controlling automated gates and barriers via smartphone application or GSM call

• Option for controlling two different gates or barriers with the same device

• 1000-user variant• Possibility for assigning up to 2000

smartphones• Notification sending if the gate or barrier fails

to open or close• Showing the open/closed status of the gates

or barriers in the smartphone application• Status reporting of 4 contact inputs via e-mail,

SMS or call• Transmits doorbell activity to mobile phone

• ONVIF camera support, makes camera pictures available in the smartphone application

• Configurable user permissions and entry periods

• Configurable automatic timed controls• Event log and report sending in e-mail

MAIN FEATURES

MAIN FEATURES

Controllable from mobile phone, without any remote control. No radio interference or gate opened by accident. Possibility for adding up to 1000 users with configurable permissions (e.g. restriction of access beyond labour hours). Stores last 1200 events with identification of users and time of control. The event log can be downloadaed remotely too (over the In-ternet), stored electronically or printed. It can report by SMS if the gate remains open or the photocell is blocked (optional). No control distance limits!

GSM Gate Control BASE 1000

Control of automated gates, garage doors and bar-riers by mobile application over the Internet, or by GSM call. If position limit switches are installed, the opened/closed state of the gate can be viewed in the mobile application and the device can also send notification by SMS or Push if the gate fails to open or close. Possibility for adding up to 1000 users with configurable permissions (e.g. restriction of access beyond labour hours). Stores last 1200 events with identification of users and time of control. No control distance limits!



GATE CONTROL

GSM AUTOMATION 03

www.tell.hu | 21

Comparison chart of Gate Control models

TECHNICAL SPECIFICATION GSM Gate Control 20 GSM Gate Control PRO 20 GSM Gate Control PRO 20 – 3G* GSM Gate Control BASE 1000 GSM Gate Control BASE 1000 – 3G* GSM Gate Control PRO 1000 GSM Gate Control PRO 1000 – 3G*

Transmission channel GSM 2G / GSM 3G / 2G / GSM GSM 3G / 2G / GSM 2G / GSM 3G / 2G / GSM

Frequency band 850/900/1800/1900 MHz 850/900/1800 /1900MHz @GSM/GPRS

900/2100 MHz @UMTS 900/1800 @ GSM/GPRS

850/900/1800 /1900MHz @GSM/GPRS

900/2100 MHz @UMTS 900/1800 @ GSM/GPRS

850/900/1800 /1900MHz @GSM/GPRS

900/2100 MHz @UMTS 900/1800 @ GSM/GPRS

Operating temperature -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC

Supply voltage 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC

Current consumption (maximum) 400 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC

Current consumption (nominal) 40 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC

Casing Plastic Plastic Plastic Plastic Plastic Plastic Plastic

Terminal connector design Connectable Connectable Connectable Connectable Connectable Connectable Connectable

Dimensions 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm

Weight 200 g 200 g 200 g 200 g 200 g 200 g 200 g

PARAMETERS

Contact inputs 2 4 4 4 4 4 4



Relay outputs 2 2 2 2 2 2 2


GSM voice call – – –

SMS sending

E-mail sending – – –

Push notification – – –

Programming method SMS USB / IP USB / IP USB / IP / SMS USB / IP / SMS USB / IP USB / IP

Programming software –

User phone numbers for forwardingincoming SMS messages 1 1 1 1 1 1 1

User phone numbers for reporting 1 4 4 4 4 4 4

User phone numbers for output control 20 / Unlimited 20 / Unlimited 20 / Unlimited 1000 / Unlimited 1000 / Unlimited 1000 / Unlimited 1000 / Unlimited

Built-in internal clock –

Security password

Event logs / number of stored events – Yes / 1200 Yes / 1200 Yes / 1200 Yes / 1200 Yes / 1200 Yes / 1200


Mobile application – – –

Individual email sending with predefinable message – – –


Periodic test report – – –

Alarm restriction

IP camera support – – –

GSM Gate Control 20



22 | www.tell.hu

Comparison chart of Gate Control models

TECHNICAL SPECIFICATION GSM Gate Control 20 GSM Gate Control PRO 20 GSM Gate Control PRO 20 – 3G* GSM Gate Control BASE 1000 GSM Gate Control BASE 1000 – 3G* GSM Gate Control PRO 1000 GSM Gate Control PRO 1000 – 3G*

Transmission channel GSM 2G / GSM 3G / 2G / GSM GSM 3G / 2G / GSM 2G / GSM 3G / 2G / GSM

Frequency band 850/900/1800/1900 MHz 850/900/1800 /1900MHz @GSM/GPRS

900/2100 MHz @UMTS 900/1800 @ GSM/GPRS

850/900/1800 /1900MHz @GSM/GPRS

900/2100 MHz @UMTS 900/1800 @ GSM/GPRS

850/900/1800 /1900MHz @GSM/GPRS

900/2100 MHz @UMTS 900/1800 @ GSM/GPRS

Operating temperature -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC -20 ºC – +70 ºC

Supply voltage 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC 9-30 VAC/DC

Current consumption (maximum) 400 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC 500 mA @ 12 VDC

Current consumption (nominal) 40 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC 120 mA @ 12 VDC

Casing Plastic Plastic Plastic Plastic Plastic Plastic Plastic

Terminal connector design Connectable Connectable Connectable Connectable Connectable Connectable Connectable

Dimensions 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm 84x72x32 mm

Weight 200 g 200 g 200 g 200 g 200 g 200 g 200 g

PARAMETERS

Contact inputs 2 4 4 4 4 4 4



Relay outputs 2 2 2 2 2 2 2


GSM voice call – – –

SMS sending

E-mail sending – – –

Push notification – – –

Programming method SMS USB / IP USB / IP USB / IP / SMS USB / IP / SMS USB / IP USB / IP

Programming software –

User phone numbers for forwardingincoming SMS messages 1 1 1 1 1 1 1

User phone numbers for reporting 1 4 4 4 4 4 4

User phone numbers for output control 20 / Unlimited 20 / Unlimited 20 / Unlimited 1000 / Unlimited 1000 / Unlimited 1000 / Unlimited 1000 / Unlimited

Built-in internal clock –

Security password

Event logs / number of stored events – Yes / 1200 Yes / 1200 Yes / 1200 Yes / 1200 Yes / 1200 Yes / 1200


Mobile application – – –

Individual email sending with predefinable message – – –


Periodic test report – – –

Alarm restriction

IP camera support – – –

GSM Gate Control PRO 20 – 3G

GSM Gate Control BASE 1000 – 3G


GSM Gate Control PRO 1000 – 3G

GSM Gate Control BASE 1000

GSM AUTOMATION 03

www.tell.hu | 23

IP-BASED REMOTE MONITORING RECEIVERS

TELLMon 26

04

Remote monitoring IP receiver for TELL-made SIA IP and TEX communicators.

TELLMon

MAIN FEATURES RECEPTION OPTIONS3G connection Optional

4G connection Optional

Forwards received signals through local RS232 port

Signal reception via IP

Reception of signals from TELL 2G communicators which use unique (TEX) protocol

Reception of signals from TELL SIA IP communicators

TECHNICAL SPECIFICATIONSupply voltage 230V AC / 12V DC


Weight 1.5kg• Standalone remote monitoring IP receiver

based on TELLMon protocol• TEX and TELLMon protocol-compatible• Optional 3G or 4G modem (direct connection

with the communicators through private APN)• Reliable and stable Linux-based operating

system• Data transfer over serial port: when inserted

into an existent system, it is capable to forward the communication of other connected receivers towards the alarm monitoring software (transparent data forwarding)

• Supports event logs saving to USB flash drive and firmware upgrade from USB flash drive

• Simple and clear graphical interface, that can be accessed remotely as well for configuration and monitoring

• Capable for simultaneously receiving reports from even up to 2000 communicators

• Compact, quiet, durable, with low power consumption and no moving parts included

TELLMon

TELLMon 3G

26 | www.tell.hu

SOFTWARE

TMS Light 28TMS Pro 29AlarmTrack 30IP Camera Detector 30

05

Complex, expandable, modern and reliable alarm monitoring software with modular structure for use on single PC.

TMS LIGHT

TMS

MAIN FEATURES SYSTEM MODULES

EXPANSION OPTIONS

• Complex, expandable alarm monitoring software

• Modern, reliable and high security, modular structure

• Diverse and extensive features

• Administration module• Operator module• Data manager module• Data saving module• Parameter manager module• Map generator

• E-mail module (initiated or automated e-mail sending)• SMS module (automated SMS sending upon an incoming event)• WebReport module (access to event logs over the Internet)• Analog dialer module (dialing phone numbers by a single click)• VoIP dialer module (dialing phone numbers via VoIP by a single click)

TMS LIGHT

28 | www.tell.hu

Complex and expandable alarm monitoring software for use on multiple PCs. The software modules can run on different machines. Modern and reliable, high security, modular structure.

TMS PRO

MAIN FEATURES SYSTEM MODULES

EXPANSION OPTIONS

Comparison chart of TMS versions

PARAMETERS TMS LIGHT TMS PRO

Data manager module

Database server verification module

Administration module

Administration through the network –

Modular expansion of administrator reports with export option

Temporary customer restriction

Automatic event repetition restriction

Single PC version

Simple report for 1,3,7,31 days back by a single click

Simple report for selected (multiple) customers

Simple report for any period in a few seconds

Manual event group restriction

Collecting event reports by category

Extended logging of user activity

Possibility to assign GPS coordinates to customers

Manual saving through the network

Linux-compatible database server –

Data saving module

Management of operator permissions

Operator data management restriction

Parameter manager module

Templates

Remote data vizualization module

Map generator module

Building highly reliable system using multi-database servers –

Multi-operator mode, even on different company sites –

Temporary restriction of customer events

Disabling test monitoring of customers temporary

Creating groups of customers

Receiver management on multiple PCs, even on different company sites –

Windows-compatible database server

• Version for use on multiple PC’s, the software modules can run on different machines

• Complex, expandable alarm monitoring software

• Modern and reliable, high security, modular structure

• Diverse and extensive features

• Administration module• Operator module• Data manager module• Data saving module• Parameter manager module• Map generator• Remote data vizualization module• Database server verification module

• E-mail module (initiated or automated e-mail sending)• SMS module (automated SMS sending upon an incoming event)• WebReport module (access to event logs over the Internet)• Analog dialer module (dialing phone numbers by a single click)• VoIP dialer module (dialing phone numbers via VoIP by a single click)

PRO

TMS PRO

SOFTWARE 05

www.tell.hu | 29

Real-time forwarding of CMS events to mobile devices. Optional interface for the TMS system. Smartphone application that assists work of emergency response teams. Forwards alarm details to emergency response teams. Transfers alarm site address details to navigation application. Automatic notification through the TMS system. Logged feedback option.

Application which helps finding IP cameras on a network, meant to provide an easy way for synchronizing IP cameras and TELL devices.

AlarmTrack

IPCamera Detector

AlarmTrack

IP Camera Detector

MAIN FEATURES SUPPORTED OPERATING SYSTEMS

• Detects camera profiles• Obtains available stream and snapshot URLs• Authentication management• Interface management• IPV4/IPV6 support

• Windows 64-bit• MacOS• Linux Ubuntu/Debian

COMPATIBILITY

• TMS LIGHT

• TMS PRO

30 | www.tell.hu

PERSONAL MONITORING SYSTEM

GPRS easyAID 32GSM easyAID 33

06

General emergency signaling device, which can be used to report an accident, attack or sickness to dispatcher center or monitoring station, by simply pressing a button. The neck-worn pendant emergency transmitter assures the patient’s freedom of movement within the device’s range. Recordable daily reminders help in checking the patient’s status and promote drug treatment. The monitoring station can obtain information on the patient’s status immediately through voice call. Easy to use, designed specifically for elderly to use in case of emergency. The device supports up to 2 RF transmitters (the package includes 1 piece).

GPRS easyAID

• Alarm reporting to monitoring station by pressing a button

• Answers incoming calls automatically in hands-free mode

• Plays recordable messages as daily reminders• Alarm reporting to monitoring station when

temperature thresholds are exceeded

• Reports nursing visit to monitoring station• Neck-worn pendant emergency transmitter• Digital display with clock

MAIN FEATURES

GPRS easyAID

32 | www.tell.hu

Comparison chart of easyAID models

TECHNICAL SPECIFICATION GPRS easyAID GSM easyAID

Transmission channel 2G / GSM GSM

Frequency band 850/900/1800/1900 MHz @GSM/GPRS 850/900/1800/1900 MHz

Operating temperature 0 ºC – +70 ºC 0 ºC – +70 ºC

Supply voltage 9-30 VDC 9-30 VDC

Current consumption (maximum) 500 mA @ 12 VDC 500 mA @ 12 VDC

Current consumption (nominal) 180 mA @ 12 VDC 180 mA @ 12 VDC

Casing Plastic Plastic

Dimensions 176x100x30 mm 176x100x30 mm

Weight 300 g 300 g

PARAMETERS

IP-based reporting to CMS –

GSM voice call –

SMS sending –

TEX protocol -

Programming method USB / IP / GSM data call (CSD) USB / GSM data call (CSD)


User phone numbers for forwarding incoming SMS messages 1 1

User phone numbers for reporting – 4

Monitoring station IP addresses 6 –

Monitoring station phone numbers 2 –

Individual reporting to monitoring station –

Configurable internal Contact ID event codes –

Automatic dialing (emergency call) –


Security password

Event logs / number of stored events Yes / 1000 Yes / 1000


Individual SMS sending to user phone numbers with predefinable message –


Number of supported RF emergency transmitters 2 2

General emergency signaling device, which can be used to report an accident, attack or sickness by SMS or call, by simply pressing a button. The neck-worn pendant emergency transmitter assures the patient’s freedom of movement within the device’s range. Recordable daily reminders help in checking the patient’s status and promote drug treatment. Information on the patient’s status can be obtained immediately through voice call. Easy to use, designed specifically for elderly to use in case of emergency. The device supports up to 2 RF transmitters (the package includes 1 piece).

GSM easyAID

• Initiates phone call and/or sends SMS by pressing a button

• Answers incoming calls automatically in hands-free mode

• Speed dialing function• Plays recordable messages as daily reminders

• Initiates call and sends SMS when temperature thresholds are exceeded

• Reports nursing visit by call and/or SMS• Neck-worn pendant emergency transmitter• Digital display with clock

MAIN FEATURES

GSM easyAID

PERSONAL MONITORING SYSTEM 06

www.tell.hu | 33

GPS-BASED TRACKING SYSTEM

easyTRACK II BASE 36easyTRACK II FULL 36

07

Vehicle tracking device with built-in GPS receiver, accredited for E-Toll declaration in Hungary. Among many others, it enables generating reports, diagrams, viewing vehicle position, vehicle track and stop points on map surface, generating alerts and no-tifications based on configurable conditionalities, thereby it is an essential element for vehicle tracking and fleet management.

Vehicle tracking device with built-in GPS receiver, accredited for E-Toll declaration in Hungary. Among many others, it enables generating reports, diagrams, viewing vehicle position, vehicle track and stop points on map surface, generating alerts and notifications based on configurable conditionalities, thereby it is an essential element for vehicle tracking and fleet manage-ment. Product variant with extra features.

easyTRACK II BASE

easyTRACK II FULL

• Suitable for E-Toll declaration in Hungary• GPRS data transfer• Built-in GPS receiver• Connectable to car alarms• Programmable through USB and IP• Visualization and logging of position and route• Separation of business/private vehicle usage• Evaluation of speed, parking, trip duration, etc.

• Sends SMS with actual vehicle position and traffic data

• Actions taken at the effect of events: - forwards car alarm signals to monitoring station - sends SMS to the user’s phone

• Independent alarm functions: position change monitoring at stopped engine, alarms triggered by contact inputs (e.g. emergency button)

OPERATIONAL OPTIONS

• Web server service: https://info.easytrack.hu/

––––––– OR –––––––• Individual server for

monitoring station• Web-based visualization

on Google Maps™ surface• Private POI management,

speed and fuel diagram, route report, vehicle uptime report, refueling report

• Low operational costs

OPERATIONAL OPTIONS

• Web server service: https://info.easytrack.hu/

––––––– OR –––––––• Individual server for

monitoring station• Web-based visualization

on Google Maps™ surface• Private POI management,

speed and fuel diagram, route report, vehicle uptime report, refueling report

• Low operational costs

MAIN FEATURES (easyTRACK II BASE, easyTRACK II FULL)

Comparison chart of easyTRACK models

TECHNICAL SPECIFICATION easyTRACK II BASE easyTRACK II FULLGPS antenna dimensions 50x38x17 mm 50x38x17 mmFrequency band 850/900/1800/1900 MHz 850/900/1800/1900 MHzOperating temperature -20 C – +70 C -20 C – +70 CSupply voltage 10-28 VDC 10-28 VDCCurrent consumption (standby) ≈20mA@12VDC ≈20mA@12VDCCurrent consumption (maximum) 500mA 500mACurrent consumption (nominal) 120mA 120mADimensions 82x125x40 mm 82x125x40 mmWeight 200 g 200 g

PARAMETERSCAN Adapter connectivity

Diesel Sensor connectivity

easyFCL connectivity

easyFMS connectivity

easyRFID connectivity –

easyRPM Monitor II connectivity

easyTEMP connectivity

Speaker output –

OUT1 output –

OUT2 output –

Individual alarm functions

POWER OUT output

Sending position and traffic data in SMS message

Position and route visualization and recording

RPM detection from alternator star-point

Evaluation of speed, parking, duration of journey, etc.

Forwarding of vehicle’s alarm system signals to monitoring station

Sends SMS to the user’s phone

FULL

easyTRAC II BASE

easyTRAC II FULL

MOBILE APPLICATION

easyTRACK

MOBILE APPLICATION

easyTRACK

36 | www.tell.hu

ACCESSORIES

Quectel UC20 Mini PCIe 3G modem 38Quectel EC25 Mini PCIe 4G modem 38easyAID IQRF emergency transmitter 38CAN Adapter 39Diesel Sensor 39easyFCL 40easyRPM Monitor II 40

easyRFID 41easyTEMP 41easyTEMP Compact 41GSM 2J-300 antenna 42Dualcom SIA IP KIT metal case+power supply 42EXT24-D 42Terminal blocks 43

08

Mini PCIe 3G modem for TELLMon receivers. Accessories: GSM antenna with cable and connector.

Mini PCIe 4G modem for TELLMon receivers. Accessories: GSM antenna with cable and connector.

Optional IQRF emergency transmitter for GSM easyAID and GPRS easyAID devices.

Quectel UC20 Mini PCIe 3G modem

Quectel EC25 Mini PCIe 4G modem

easyAID IQRF emergency transmitter

MAIN FEATURES

• Single button RF emergency transmitter• IQRF technology

Quectel UC20 Mini PCIe 3G modem

easyAID IQRF emergency transmitter

COMPATIBILITY

• easyAID

COMPATIBILITY

• TELLMon

COMPATIBILITY

• TELLMon

38 | www.tell.hu

Optional CAN Adapter for easyTRACK II BASE and easyTRACK II FULL devices. The adapter makes available different data read from the vehicle’s CAN bus, which are used for graphs, reports and notifications.

CAN Adapter

AVAILABLE CAN DATA (vehicle-dependent) PARAMETERSeasyTRACK II BASE connectivity

easyTRACK II FULL connectivity

TECHNICAL SPECIFICATIONSupply voltage 8-36V DC


21mA@12V DC


Weight 37g

• vehicle speed• engine speed• vehicle mileage• total fuel consumption• acceleration pedal position

CAN Adapter

Diesel Sensor (100cm)

Diesel Sensor (75cm)

Capacitive fuel level measuring probe for easyTRACK II BASE and easyTRACK II FULL devices, for diesel-powered vehicles.

Diesel Sensor

MAIN FEATURES PARAMETERSeasyTRACK II BASE Connectivity

easyTRACK II FULL Connectivity

TECHNICAL SPECIFICATIONDimensions (75 cm) 775x36x41 mm

Dimensions (100 cm) 1025x36x41 mm

Weight 1kg

• Makes available reports and monitoring of fuel level, refueling, fuel consumption and fuel drainage on the easyTRACK web interface

• Has to be installed in the vehicle’s fuel tank• The needed length can be obtained by cutting

the tube when installing• Standard probe length: 75cm or 100cm• Cable and protecting tube length: 7m• Casing protection: IP68• Recommended for fuel level monitoring

of vans, trucks and machinery

COMPATIBILITY

• easyTRACK II

COMPATIBILITY

• easyTRACK II

ACCESSORIES 08

www.tell.hu | 39

Optional fuel tank cap lock with opening sensor for easyTRACK II BASE and easyTRACK II FULL devices, for Ø80mm and Ø100mm fuel inlet.

easyFCL



TECHNICAL SPECIFICATIONDimensions (easyFCL80)

159x127x62mm (Ø127mm)

Dimensions (easyFCL100)

184x150x58mm (Ø150mm)

Operating temperature -40ºC – +70ºC

Weight (easyFCL80) 1.26kg

Weight (easyFCL100) 1.48kg


Current consumption(maximum)

4mA

Current consumption(nominal)

2.8mA

• Includes an electronic opening sensor• Makes available fuel cap opening alerts and

indication of fuel cap opening in reports• Provides mechanical protection against

unauthorized opening and fuel theft • Cable length: 7.5m (with 2.5m protecting tube)• Robust design

Optional engine revolution interface for easyTRACK II BASE and easyTRACK II FULL devices.

easyRPM Monitor II



TECHNICAL SPECIFICATIONDimensions 60x35x20 mm

Weight 200 g


• Detects engine revolution signals from the alternator’s power terminals and provides signal proportional to the engine revolution. Makes available evaluation of working hours, idle time and journey time in the uptime report, as well as the average fuel consumptions for journey and working, if a fuel probe is also installed in the vehicle/machine. Its primary purpose of use is to determine the operating status of machinery.

• The easyRPM Monitor II interface is only necessary to be installed if there is no star-point output (usually marked with “W”) on the alternator in the given vehicle/machine. If there is a star-point output, this interface is not needed, because the star-point can be connected directly to the “RPM” input of the easyTRACK II device.

COMPATIBILITY

• easyTRACK II

COMPATIBILITY

• easyTRACK II

easyFCL80 easyFCL100

40 | www.tell.hu

Optional proximity reader for driver identification, for easyTRACK II FULL devices. The reader enables the system to identify and assign drivers to given journeys, which information becomes thereby available in reports.

easyRFID

MAIN FEATURES PARAMETERSeasyTRACK II FULL Connectivity


Weight 60g• Driver identification• Switching between business and private

vehicle usage• Operating frequency: 125 kHz• Accessories: 2pcs RFID keyfobs included

COMPATIBILITY

• easyTRACK IIeasyRFID

COMPATIBILITY

• easyTRACK II

COMPATIBILITY

• Compact GSM II

• Pager7

Optional temperature sensor for easyTRACK II BASE and easyTRACK II FULL devices.

Optional temperature sensor for Compact GSM II and Pager7 devices.

Application areas: ambient temperature measuring in industry, agriculture and other areas, boilers, high/low temperature detection.

easyTEMP

easyTEMP Compact

MAIN FEATURES

MAIN FEATURES

PARAMETERSeasyTRACK II BASE Connectivity


TECHNICAL SPECIFICATIONOperating temperature -30ºC – +70ºC

TECHNICAL SPECIFICATIONOperating temperature -30ºC – +70ºC

Weight 80g

• Makes available temperature reports and temperature monitoring on the easyTRACK web interface.

• The easyTRACK II device supports up to 3 temperature sensors.

• The sensor’s casing is made of acid-proof stainless steel.

• The sensor comes with 5m cable and 4.8m cable protecting tube.

• Measuring temperature range: -30ºC – +70ºC

• The Compact GSM II device supports 1 temperature sensor

• The Pager7 device supports up to 4/6 temperature sensors, depending on the number of inputs.

• The sensor’s casing is made of acid-proof stainless steel

• The sensor comes with 1m cable• Measuring temperature range: -30ºC – +70ºC

easyTEMP

easyTEMP Compact

ACCESSORIES 08

www.tell.hu | 41

Optional metal case with power supply for DUALCOM SIA IP device.

Antenna for GSM and 2G/3G-based TELL communicators, gate controllers and emergency call devices.

24-input expansion module for DUALCOM device.

DUALCOM SIA IP KIT metal case + power supply

GSM 2J-300 antenna

EXT24-D

MAIN FEATURES

MAIN FEATURES


Weight 104 g

• Makrai ME.20-14 power supply• Built-in protections

-overloading -short-circuit -overheating -battery reverse polarity (fuse)

• 0dB omni-directional GSM antenna• Black ABS casing• Magnetic mount• Comes with 2.5m cable and FME-F connector

EXT24-D

COMPATIBILITY

• Adapter2

• Compact GSM II

• DUALCOM

• ecoLINE GSM II / SIA IP

• GSM Gate Control 20/1000/BASE/PRO

• GSM/GPRS easyAID

• GSM/GPRS Adapter

• Pager4

• Pager7

COMPATIBILITY

• DUALCOM SIA IP

COMPATIBILITY

• DUALCOM

v01-EN-2018.02.27

TECHNICAL SPECIFICATIONInput 230V ±10% 50/60 Hz

Output 12 V – 13,8 V adjustable

Max. load 1.5 A

Insultation class II.

Ingress protection IP 00

Max. ambient temperature -10 °C – +50 °C

42 | www.tell.hu

GPRS Adapter terminal block

GSM Adapter MINI terminal block

GSM Pager3 Z6 terminal block

GSM Gate Control 20 terminal block

GPRS Pager3 Z6 terminal block

GSM Gate Control 1000/BASE 1000 terminal block

GSM Gate Control PRO 20/1000 terminal block

TERMINAL BLOCKS

Pictures in the catalog are illustrations. We reserve the right of changing our products.

ACCESSORIES 08

www.tell.hu | 43

www.tell.hu

Documents

2018 - TELL · The devices of TELL appear in many fields of both private and business sectors. We supply our partners with well-scalable systems, which open up the opportunity for