AC

, H

ea

ter

& C

oo

lin

g S

yste

m

258 Toll Free Order Line 800.854.1280

JJ

1955-57 Reproduction RadiatorsThese reproduction radiators install on the grill side of the core support on your 1955-57 Chevrolet model with OEM precision, mounting correctly with original style brackets. Each radiator is equipped with a new... not rebuilt, tank and core. Comes with original style mounting brackets attached and installs as original to the radiator support. These high effi ciency radiators feature a copper core with 1/2" tubes on 3/8" centers 3-row core for the 6 cylinder models and a 4-row core for the V8 models which gives you increased cooling without modifi cations to your car. Fan shrouds, radiator petcock and radiator cap are not included and sold separately.Note: Shipped oversize.

Radiators for Six CylinderGrill Side Mounting TF500219 1955-56 16-5/8" x 23" x 2" ..................................... 359.99 ea TF600240 1957 16-5/8" x 23" x 2" ..................................... 359.99 ea

Radiators for Small BlockEngine Side Mounting TF500218 1955-57 16-5/8" x 21-3/8" x 2-5/8" ........................ 389.99 ea Grill Side Mounting TF600114 1955-56 16-5/8" x 21-3/8" x 2-5/8" ........................ 399.99 ea TF500217 1957 16-5/8" x 21-3/8" x 2-5/8" ........................ 399.99 ea

Radiators for Big BlockGrill Side Mounting TF500217 1957 16-5/8" x 21-3/8" x 2-5/8" ........................ 399.99 ea TF600114 1955-56 16-5/8" x 21-3/8" x 2-5/8" ........................ 399.99 ea

OS1

TF600114

TF600128

Radiators 1955-57 Extreme Series Cooling Systems

These Be Cool Extreme series cooling system modules offer the ultimate in fi t, fi nish, and performance. At the heart of every module is a direct fi t, dual core, crossfl ow radiator sealed with a machined cap and mounted in an exclusive aluminum core support. A hand-fabricated aluminum overfl ow tank and matching windshield washer fl uid reservoir are mounted on either side. Air is pulled through the radiator by two high-torque electric fans with machined motor covers and mounting brackets. These modules come pre-assembled with stainless steel hardware and includes a fan wiring harness with temperature sender and waterproof 40 amp relays. Designed to cool engines producing up to 700 horsepower and comes fully polished. Made in the USA. Note: Modifi cation to upper and lower hoses and transmission lines required for crossfl ow upgrade. Short water pump required. Shipped truck freight.

Models without ACModels with Manual Transmission TF600118 1955 small block/big block ................................. 3859.99 set TF600119 1955 LS1 ............................................................. 3859.99 set TF600120 1956 small block/big block ................................. 3859.99 set TF600121 1956 LS1 ............................................................. 3859.99 set TF600122 1957 small block/big block ................................. 3859.99 set TF600123 1957 LS1 ............................................................. 3859.99 set Models with Automatic Transmission TF600124 1955 small block/big block ................................. 3859.99 set TF600125 1955 LS1 ............................................................. 3859.99 set TF600126 1956 small block/big block ................................. 3859.99 set TF600127 1956 LS1 ............................................................. 3859.99 set TF600128 1957 small block/big block ................................. 3859.99 set TF600129 1957 LS1 ............................................................. 3859.99 set

Models with ACModels with Manual Transmission TF600130 1955 small block/big block ................................. 4499.99 set TF600131 1955 LS1 ............................................................. 4499.99 set TF600132 1956 small block/big block ................................. 4499.99 set TF600133 1956 LS1 ............................................................. 4499.99 set TF600134 1957 small block/big block ................................. 4499.99 set TF600135 1957 LS1 ............................................................. 4499.99 set Models with Automatic Transmission TF600136 1955 small block/big block ................................. 4499.99 set TF600137 1955 LS1 ............................................................. 4499.99 set TF600138 1956 small block/big block ................................. 4499.99 set TF600139 1956 LS1 ............................................................. 4499.99 set TF600140 1957 small block/big block ................................. 4499.99 set TF600141 1957 LS1 ............................................................. 4499.99 set

Designed For Up To 700 Horsepower! Made in the USA!

1955-57 Crossfl ow Aluminum Conversion ModulesBe Cool radiators are designed to provide the added cooling capacity required by high horsepower engines. These are complete module cooling systems that include the polished aluminum radiator with radiator cap, dual electric fans, vented coolant recovery tank, aluminum fan mounting brackets, electric fan wiring harness and all necessary installation hardware. These mount in front of the core support and must use short water pumps. Can be used with any engine combination.Note: Upper and lower hose, and transmission line modifi cation necessary to use crossfl ow upgrade. Shipped double oversize.

Polished Aluminum TF600171 1955-57 23" x 22" standard transmission ........ 1419.99 ea TF600172 1955-57 23" x 22" automatic transmission ...... 1529.99 ea

Natural Aluminum TF600173 1955-57 23" x 22" standard transmission ........ 1269.99 ea TF600174 1955-57 23" x 22" automatic transmission ...... 1419.99 ea

OS2 1955-57 Northern Aluminum Muscle Car RadiatorsUpgrade your cooling system with a high performance bolt-in radiator from Northern! Manufactured with race-proven technology, these radiators feature a two-row, 1" core tube design for maximum cooling effi ciency. Northern fan and shroud assemblies are also available for a matched cooling system.Important: Dimensions listed include the radiator, tanks and brackets. Note: Shipped oversize. CR5122 1955-57 V8 22-7/8" x 20-3/8" x 3-1/8" ................. 499.99 ea

Bolt-in Installation60% Lighter Than Copper/BrassUp To 75% More Cooling CapacityFully Welded Construction

Heavy Duty, Die-stamped TanksExtra Thick Hose ConnectionsBillet Filler Neck 7 Plate Alum. Transmission Cooler

Radiators

OS1

JJ

AC

, Hea

ter

& C

oo

ling

Syste

m

259www.classicindustries.com

1955-57 Polished Aluminum RadiatorsThese polished high performance radiators are manufactured from tig welded aircraft grade aluminum with brazed aluminum cores and billet fi ller necks. Each radiator offers high capacity cooling with louvered fi ns and 3/8" spacing between core tubes. Designed for direct fi t installation. Radiator cap is included.Important: All radiators have built in automatic transmission coolers and can be used in both automatic and manual transmission applications. Core size dimensions listed below. Note: Shipped oversize.

Two-Row Core1955-57 – 8 Cylinder Mounting PositionTF600261 17-1/4" x 21-1/2" x 1-3/4" 169.99 ea

Three-Row Core1955-56 – 6 Cylinder Mounting PositionTF600262 17-1/4" x 21-1/2" x 2" ....... 219.99 ea 1955-57 – 8 Cylinder Mounting PositionTF600263 17-1/4" x 21-1/2" x 2" ....... 219.99 ea

Radiators/Fan Shrouds

TF600262

OS1

Economy Replacement Aluminum RadiatorDon’t be fooled by the price of these radiators. These quality lightweight aluminum radiators stand up to the demands of everyday driving with excellent cooling properties. These replacement radiators vary in appearance from the originals, but fi t in the factory mounting locations on vehicles with an 8 cylinder core support. Silla radiators also are designed to work with original fan shrouds. Every radiator includes fi ttings for an automatic transmission cooler.Important: The core is slightly smaller that the original; this will not lessen cooling capabilities. Measure your core. Hose adaptors are included.Note: Shipped oversize. SR002801 1955-57 1-row core ...... 161.99 ea

OS1

Universal Fan ShroudsShrouds will fi t all small block and big block radiators. Mounting hardware is included for installation. Will replace all plastic and OEM shrouds and are available in both chrome or EDP black fi nishes.3" Wide 20" Diameter Shrouds T9453 chrome fi nish. ........................... 19.99 ea T9451 EDP black fi nish ....................... 39.99 ea 5-1/2" Wide 20" Diameter Shrouds T9454 chrome fi nish ............................ 39.99 ea

1955-57 Reproduction Metal Fan ShroudsReproduction metal fan shroud for 1955-57 models. These shrouds are powder coated black for a durable, long-lasting fi nish. These shrouds fi t well and are easy to install. Includes installation hardware and detailed instructions. Made in USA.Important: *V8 Models with radiator mounted in 6 cylinder position on a 6 cylinder core support should use item #TF600225. **Requires TF500214.Note: Shipped oversize.6 Cylinder Core Support TF600225 * 1955-57 6 or 8 cylinder 109.99 ea 8 Cylinder Core Support TF600226 1955-57 8 cylinder ....... 109.99 ea 8 Cylinder Core Support – 6 Cylinder Position TF600227 ** 1955-57 8 cylinder ....... 129.99 ea

TF600225

TF600227

T9451

Northern Radiator Fan Shroud KitsNorthern do-it-yourself fan shroud kits are an excellent way to get a custom fi tted fan shroud for your radiator and engine driven fan! Designed to fi t exactly on Northern radiators (where specifi ed), as well as most stock or aftermarket radiators. Manufactured from .063" lightweight aircraft aluminum. Made in USA. Part# A B C Fits Radiators: Price Z40020 19-5/16" 16-3/4" 2-1/2" .............................................................................. 59.99 kit Z40021 19-5/16" 20-1/2" 2-1/2" .............................................................................. 59.99 kit Z40022 19-5/16" 22" 2-1/2" .............................................................................. 59.99 kit Z40023 19-5/16" 25-3/4" 2-1/2" .............................................................................. 59.99 kit Z40024 19-5/16" 18-7/8" 2-1/2" .............................................................................. 59.99 kit Z40025 17-7/8" 15-1/8" 2-1/2" .............................................................................. 59.99 kit Z40026 18-1/8" 28-1/8" 2-1/2" .............................................................................. 59.99 kit Z40026 18-1/8" 28-1/8" 2-1/2" .............................................................................. 59.99 kit Z40027 16" 22-1/4" 2-1/2" .............................................................................. 59.99 kit Z40028 16" 26-1/4" 2-1/2" .............................................................................. 59.99 kit Z40029 18-5/8" 15" 2-3/8" .............................................................................. 59.99 kit Z40030 18-1/2" 21-1/2" 2-7/8" .............................................................................. 59.99 kit Z40031 18-3/8" 22" 2-5/8" .............................................................................. 59.99 kit Z40032 16" 21-1/8" 2-1/2" .............................................................................. 59.99 kit Z40033 25-1/8" 15" 2-1/2" .............................................................................. 59.99 kit Z40034 18" 20-1/2" 2-1/2" .............................................................................. 59.99 kit Z40036 22-7/8" 16-1/4" 2-5/16" CR5122 ................................................................. 59.99 kit

Z40024C

fl ange

fl ange

fl ange fl ange

A

B

Radiators/Fan Shrouds

1955-57 Radiator Conversion Bracket SetThese brackets let you keep your 6 cylinder radiator support while adding a V8. These will put your radiator in the V8 position behind the radiator support. They can also be used on a V8 support to put a radiator in the 6 cylinder position for added clearance in front of the engine. Bracket sets are available in both steel and stainless steel. TF500214 1955-57 steel ................... 39.99 set TF600270 1955-57 stainless steel ..... 49.99 set

TF500214

OS1

AC

, H

ea

ter

& C

oo

lin

g S

yste

m

260 Toll Free Order Line 800.854.1280

JJ

1955-57 Radiator Drain Petcock And HoseReproduction radiator drain petcock with hose for 1955-57 Chevrolet passenger models. This petcock is available separately or with 6" of rubber drain hose included. It is manufactured to install on original or reproduction replacement radiators. K0085 1955-57 petcock only ......... 4.99 ea TF600166 1955-57 petcock and hose .. 6.99 ea

TF600166

1955-57 AC Delco RC-1 Radiator CapReplacement AC Delco RC-1 radiator cap for 1955-57 models. Rated at the factory 7 lb pressure rating.G3546 1955-57 RC-1 .................... 8.99 ea

1955-57 RC-549 Radiator CapReproduction AC Delco Radiator Cap for 1955-57 Chevrolet passenger models. Authentic reproduction cap that features correct markings on the radiator cap and is offi cially licensed by GM Restoration Parts.TF600164 1955-57 RC-549 ............ 34.99 ea

1955-57 Billet Aluminum Radiator CapBillet aluminum radiator cap for 1955-57 Chevrolet passenger car models to provide a unique custom look. Rated at a 16 lb pressure rating. T6017 1955-57 16 lb rating ............. 25.99 ea

Thermocap Radiator CapThermocap combines a high quality pressurized radiator cap with a thermometer element, allowing you to know when it’s safe to open your radiator without any guess work. Easy to read temperature gauge in Celsius and Fahrenheit. Specify red, blue or silver when ordering.Note: Stock cooling systems are rated at 7 psi.MR2470 13 psi ................................... 31.99 ea MR2471 16 psi ................................... 31.99 ea

MR2470Rback side view

MR2470SMR2470B

Radiator Components

Stainless Steel Radiator Overfl ow TanksThese beautiful polished stainless steel radiator overfl ow tanks will give your engine compartment a clean, custom look. They are available in various sizes and feature a twist-on cap and mounting hardware. 60721 2" x 13" ................................... 24.99 ea 60731 2" x 15" ................................... 25.99 ea 60741 2" x 17" ................................... 29.99 ea 60751 2" x 19" ................................... 29.99 ea 60761 3" x 10" ................................... 31.99 ea 60781 3" x 16" ................................... 32.99 ea

1955-57 Radiator And Heater Hose Clamp SetReproduction all-wire style clamps used on engine radiator and heater hoses for 1955-57 Chevrolet passenger models. TF600149 1955-56 ........................... 5.99 set TF600150 1957 deluxe heater ..... 5.99 set TF600151 1957 standard heater .. 5.99 set

TF600150

1955-57 Radiator Overfl ow HoseReplacement hose for the radiator overfl ow. Produced with OEM style thin walled hose. This often overlooked hose is notorious for deterioration. B0056 1955-57 ................................... 4.99 ea

60761

1955-57 Radiator Bug ScreenRadiator bug screen for 1955-57 models. Ties in front of the radiator to prevent bugs from clogging the radiator core, reducing the cooling capacity. Add an authentic look to your restoration while protecting your cooling system. TF600215 1955-57 ............................. 24.99 ea

Radiator Components

Be Cool Radiator AccessoriesChoose the right radiator cap and recovery tank to complement your cooling system. Billet radiator caps, rated at 13 psi, are recommended for all Be Cool radiators, along with a proper coolant recovery tank, which is safer for the environment than overfl ow tanks. Aluminum brackets are also available to install the stock fan shroud and fi nish your Be Cool conversion.

Radiator CapsRound Style with Be Cool Logo TF600175 polished fi nish ................. 54.99 ea TF600178 natural fi nish .................... 49.99 ea Octagon Style with Be Cool Logo TF600176 polished fi nish ................. 59.99 ea TF600179 natural fi nish .................... 49.99 ea Sure Grip Style with Embossed Emblem TF600177 polished fi nish ................. 69.99 ea TF600180 natural fi nish .................... 59.99 ea

Recovery Tanks7" x 3" with Inlet and Mount Bracket BC71003 polished fi nish ................. 149.99 ea BC70003 natural fi nish .................... 119.99 ea

Fan Shroud Mounting Brackets BC72003 natural fi nish – 4 req. ...... 12.99 ea

TF600175

TF600180

TF600176

BC72003

BC71003

JJ

AC

, Hea

ter

& C

oo

ling

Syste

m

261www.classicindustries.com

Radiator Components

Silicone Engine Coolant Plumbing SetGet the durability of silicone coolant hoses for your custom engine install with these basic universal sets. Each set contains a 90 degree, a 45 degree angled, and a straight 1-1/2" reinforced black silicone hose along with a 1-1/2" 45 degree mandrel bent and one straight aluminized steel tube each featuring beaded ends for a positive seal. Individual components also available for building your own system or adding onto the radiator hose set here.

Radiator Hose Set Z71051 1-1/2" silicone hose set ............ 79.99 set

Individual ComponentsAluminized Steel Coolant tubes Z71000 1-1/4" x 4" x 6" 90° bend ..... 24.99 ea Z71001 1-1/2" x 4" x 6" 90° bend ..... 24.99 ea Z71002 1-3/4" x 4" x 6" 90° bend ..... 24.99 ea Z71003 1-1/4" x 4" x 6" 75° bend ..... 24.99 ea Z71004 1-1/2" x 4" x 6" 75° bend ..... 29.99 ea Z71005 1-3/4" x 4" x 6" 75° bend ..... 29.99 ea Z71006 1-1/4" x 4" x 6" 45° bend ..... 24.99 ea Z71007 1-1/2" x 4" x 6" 45° bend ..... 24.99 ea Z71008 1-3/4" x 4" x 6" 45° bend ..... 24.99 ea Stainless Steel Coolant Tubes Z71060 1-1/2" x 4" x 4" 90° bend ..... 34.99 ea Z71061 1-3/4" x 4" x 4" 90° bend ..... 44.99 ea Z71063 1-3/4" x 4" x 4" 75° bend ..... 44.99 ea Z71064 1-1/2" x 4" x 4" 45° bend ..... 34.99 ea Z71065 1-3/4" x 4" x 4" 45° bend ..... 44.99 ea Z71066 1-1/2" x 3" straight tube 24.99 ea Z71067 1-3/4" x 3" straight tube 29.99 ea Reinforced Black Silicone Hoses Z71031 1-1/4" x 5" x 5" 90° bend ..... 24.99 ea Z71032 1-1/2" x 5" x 5" 90° bend ..... 24.99 ea Z71033 1-3/4" x 5" x 5" 90° bend ..... 29.99 ea Z71028 1-1/4" x 4" x 4" 45° bend ..... 19.99 ea Z71029 1-1/2" x 4" x 4" 45° bend ..... 24.99 ea Z71030 1-3/4" x 4" x 4" 45° bend ..... 29.99 ea Z71025 1-1/4" x 6" straight hose 14.99 ea Z71026 1-1/2" x 6" straight hose 14.99 ea Z71027 1-3/4" x 6" straight hose 14.99 ea Step Up/Down Hose Connectors Z71035 1-1/4" to 1-1/2" x 8" ................. 24.99 ea Z71036 1-1/2" to 1-3/4" x 8" ................. 24.99 ea

Z71051

Z71004

Z71000

1955-57 Reproduction Radiator HosesReproduction radiator hoses for 1955-57 Chevrolet passenger models. Feature correctly numbered hoses with GM codes printed on each hose. Provides for an original factory look in the engine compartment.Upper Radiator Hoses TF600158 1955-56 6 cylinder ............... 21.99 ea TF600159 1955-57 8 cylinder ............... 19.99 ea TF600160 1956-57 dual 4 bbl and F.I. .. 44.99 ea TF600161 1957 6 cylinder ............... 32.99 ea TF600212 1957 V8 Ram Jet engine 24.99 set Lower Radiator Hoses TF600162 1955-57 6 cylinder ............... 29.99 ea TF600163 1955-57 8 cylinder ............... 20.99 ea

1955-57 Replacement Radiator HosesReplacement radiator hoses for 1955-57 models. Your choice of molded or ribbed fl ex hoses. Ribbed fl ex hoses will bend to accommodate tight spaces or unoriginal bends.Note: *These hoses are for radiators mounted in front of the radiator core support.Upper Radiator Hoses TF600155 1955-56 6 cylinder .......... 11.99 ea TF600153 1955-57 8 cylinder .......... 12.99 ea Lower Radiator Hoses TF600154 1955-57 8 cylinder .......... 13.99 ea Ribbed Flex Hoses TF600156 1957 6 cylinder upper 16.99 ea TF600157 1957 6 cylinder lower 15.99 ea Molded Radiator Hoses for Big Blocks TF600207 * 1955-57 upper ................. 29.99 ea TF600208 * 1955-57 lower. ................. 29.99 ea

TF600159

TF600154

Flexible Radiator HosesIf you’re doing an engine swap in your Chevrolet, these fl exible radiator hoses may be just what you need to complete the cooling system installation. A variety of sizes are available. Hose features a unique design that allows it to conform to a variety of bends and curves without kinking or collapsing. HF1107 1-1/4" x 7-3/8".......................... 5.99 ea HF1111 1-1/4" x 11" .............................. 9.99 ea HF1119 1-1/4" x 19-9/16" x 1-1/2" ....... 9.99 ea HF1123 1-1/4" x 23" .............................. 13.99 ea HF1208 1-1/2" x 7-9/16"........................ 5.99 ea HF1211 1-1/2" x 10-11/16" .................... 9.99 ea HF1212 1-1/2" x 12-3/16"...................... 9.99 ea HF1317 1-1/2" x 16-5/16" x 1-3/4" ....... 9.99 ea HF1217 1-1/2" x 17-1/16"...................... 9.99 ea HF1318 1-1/2" x 19-1/2" x 1-3/4" ......... 13.99 ea HF1220 1-1/2" x 19-13/16".................... 13.99 ea HF12205 1-1/2" x 20-1/2"........................ 9.99 ea HF1222 1-1/2" x 22" .............................. 14.99 ea HF12228 1-1/2" x 22-7/8" 90 degree end 10.99 ea HF1223 1-1/2" x 23" x 1-3/4" ................ 9.99 ea HF1225 1-1/2" x 25" .............................. 13.99 ea HF1214 1-1/2" x 30" .............................. 9.99 ea HF1316 1-3/4" x 16-5/16"...................... 12.99 ea HF1319 1-3/4" x 18-13/16".................... 13.99 ea HF1323 1-3/4" x 23-1/2"........................ 9.99 ea

Flexible Stainless Steel Hose SetsThis is an ideal replacement for your worn or rotted hoses. Noncorrosive construction conforms to tight bends and holds shape indefi nitely. Rated for high temperatures and high pressure Can be easily cut to custom lengths. This high-quality set will enhance any engine compartment.Note: 48" radiator hose set has double quantity of end caps, sleeves, reducers, and clamps. Save money and make both upper and lower radiator hoses with one 48" set.Heater Hose Sets S7313 polished ends .......................... 64.99 set S7314 chrome ends ........................... 49.99 set Radiator Hose Sets – Polished Ends S7301 12" .......................................... 29.99 set S7304 24" .......................................... 39.99 set S7307 36" .......................................... 59.99 set S7310 48" .......................................... 69.99 set Radiator Hose Sets – Chrome Ends S7302 12" .......................................... 34.99 set S7305 24" .......................................... 55.99 set S7308 36" .......................................... 49.99 set S7311 48" .......................................... 54.99 set

S7311

1955-57 Heater Hose Sets With GM MarkingsReproduction of correct grooved hose with GM markings for 1955-57 models. Each set includes the correct clamps for each application. TF600144 1955-56 6 cyl ......................... 34.99 set TF600145 1955-56 8 cyl. ........................ 34.99 set TF600146 1957 6 cyl ......................... 34.99 set TF600147 1957 8 cyl. w/std, dlx heater 34.99 set TF600148 1957 8 cyl. with AC ......... 34.99 set

Replacement Heater HoseReplacement heater hoses are available in both required diameters. These hoses are in 5 foot lengths for a cut to fi t use. YE5210 5/8" 5 feet .......................... 5.99 ea YE5215 3/4" 5 feet .......................... 4.99 ea

YE5215

TF600145

HF1318

Radiator Components

Z71029 Z71027

AC

, H

ea

ter

& C

oo

lin

g S

yste

m

262 Toll Free Order Line 800.854.1280

JJ

Heater Hose Coupler Repair SetRemoves even the most corroded heater hose coupler on vehicles. Contains a heater hose coupler remover that can be driven into couplers and then turned out with a 5/8" socket or wrench. When the coupler is corroded the special tapered, reverse drill can be used to remove the remaining connector. Then the tap can be used to restore the original 1/2"-14 NPT threads. Includes storage case with tray. 62450 .................................................. 64.99 set

Corbin Heater Hose ClampsFrom the earliest days of production, Chevrolet used a pinch type “Corbin” clamp to retain the heater hoses on the heater core outlet tubes. These wire type reproduction hose clamps are designed to retain the heater hoses with no water or antifreeze leakage. AU5354 9/16" o.d. hose ....................... 1.49 ea 5355 5/8" o.d. hose ......................... 1.49 ea AU5356 11/16" o.d. hose ...................... 1.49 ea AU5357 3/4" o.d. hose ......................... 1.99 ea

5355

1955-57 Heater Hose ClipThis clip is for all 1955-57 models. The hose clip holds two heater hoses. Bracket attaches under the battery box and holds the heater hoses to the inner fender area. 3825416 1955-57 1 required ............ 6.99 ea

Radiator Components

1955-57 Chrome Water NecksTriple plated chrome. Distinctive custom design replaces original equipment. Comes complete with plated bolts and gasket. 1 year manufacturer’s warranty.Early Style Water Necks T9228 1955-57 o-ring type ............ 9.99 ea T4788 1955-57 gasket style ........... 11.99 ea Late Style Water Necks T9468 1955-57 with 1/2" NPT port 9.99 ea T9229 1955-57 o-ring type ............ 12.99 ea T4789B 1955-57 gasket style ........... 11.99 ea Replacement O-Ring 66610 1955-57 o-ring .................... 1.99 ea

OEM Style Powder Coated Water NeckThese are “O” ring style water necks powder coated in Chevy orange. Keep that original look and color on your fresh engine with a new powder coated water neck. Available for early, late or late with a hole Chevy engines. T9928P 1955-57 early Chevy ........... 44.99 ea T9929P 1955-57 late Chevy ............. 44.99 ea T9930P 1955-57 late Chevy w/hole .. 45.99 ea

Swivel Water NecksSwivel water necks rotate 360 degrees and are great for applications where the upper radiator hose is routed different than stock applications. These water necks are available in polished aluminum, chrome plated aluminum or precision CNC machined stainless steel and with necks at various angles. They will fi t most small block and big block engines.Polished Aluminum 6015 15 degree ............................ 14.99 ea 6003 45 degree ............................ 14.99 ea 6009 90 degree ............................ 15.99 ea Chrome Plated Aluminum 6015C 15 degree ............................ 19.99 ea 6003C 45 degree ............................ 19.99 ea 6009C 90 degree ............................ 19.99 ea CNC Machined Stainless Steel PF1058 0 degree .............................. 141.99 ea PF1054 15 degree ............................ 184.99 ea PF1056 45 degree ............................ 184.99 ea

6015

T9228

PF1056

PF1058

K0060

Big Block Water Pump Bypass Hose SetThis set will replace your worn out, thinning or deteriorating original hose with a correct replacement hose. This set includes a pre-cut and pre-formed hose and the two tower clamps. 0059 short water pump .................. 14.99 set K0060 long water pump .................. 9.99 set

1955-56 Heater Valve Hose And Clamp SetReproduction heater valve hose for 1955-56 models. Set includes reproduction hose with GM stamping and 2 wire clamps. TF600152 1955-56 ............................... 2.99 set

T9928P T9929P

T9930P

Radiator Components

Radiator Hose Reducer BushingsThese rubber hose reducers are designed for custom applications to allow the use of a larger i.d. radiator hose with smaller inlets and outlets on radiators, water pumps and thermostat housings. Simply insert them into the hose before installation. K1231 2" i.d. to 1-3/4" i.d. ................... 8.99 ea K1232 1-3/4" i.d. to 1-5/8" i.d. ............ 11.99 ea K1233 1-3/4" i.d. to 1-1/2" i.d. ............ 8.99 ea

K1231

Universal Coolant FilterPrevent dangerous clogs in your cooling system with this in-line coolant fi lter. Featuring heavy duty solid brass construction, this fi lter is installed in line with the radiator hose ahead of the radiator to prevent dirt and debris from entering and causing damage. RF002 for heater hose .......................... 39.99 set

PF1007

K0150

PF1006

K0151

Stainless Steel Heater Hose FittingsThese stainless steel fi ttings thread into the water pump and intake manifold to provide heater hose attachments. Each set includes two fi ttings and are available in four piece sets with two fi ttings and two 1/2" stainless steel pipe plugs.For 5/8" i.d. Hose PF1007 5/8" x 1-3/4" & 5/8" x 2-7/8"L 31.99 pr PF1006 5/8" x 1-3/4"L .......................... 26.99 pr For 5/8" i.d. Hose with 1/2" Pipe Plugs PF1024 5/8" o.d. x 1-3/4"L ................... 41.99 set PF1025 5/8" o.d. x 1-3/4" & 2-7/8"L .... 44.99 set For 5/8" and 3/4" i.d. Hose PF1008 5/8" x 1-3/4" & 3/4" x 1-3/4"L 26.99 pr PF1009 5/8" x 1-3/4" & 3/4" x 2-7/8"L 31.99 pr For 5/8" and 3/4" i.d. Hose with 1/2" Pipe Plugs PF1026 5/8" & 3/4" o.d. x 1-3/4"L ........ 41.99 set PF1027 5/8" x 1-3/4" & 3/4" x 2-7/8"L 44.99 set Individual Fittings PF1001 5/8" o.d. x 1-3/4"L ................... 15.99 ea PF1002 5/8" o.d. x 2-7/8"L ................... 18.99 ea PF1003 3/4" o.d. x 1-3/4"L ................... 15.99 ea PF1004 3/8" o.d. x 2-7/8"L ................... 18.99 ea

Water Pump Hose Outlet FittingsReproduction water pump hose outlet fi ttings for 1955-57 models. Each fi tting screws into the water pump. Hose Outlet Fitting K0150 small block .......................... 19.99 pr K0150 big block .............................. 19.99 pr Bypass Hose Fitting K0151 big block – slotted ............... 19.99 pr

JJ

AC

, Hea

ter

& C

oo

ling

Syste

m

263www.classicindustries.com

Thermostat Housing Bolt SetsNobody likes water leaks. These premium grade bolts are engineered to properly engage the manifold threads and resist loosening. They come in your choice of black oxide fi nished chrome moly or rust-proof stainless steel, with handy 12 point or standard hex heads. Washers included. Each set includes 3 bolts: two 1" bolts and one 2" bolt. AR13741 black oxide 12 point ......... 6.99 set AR13742 black oxide hex head ........ 6.99 set AR43741 stainless 12 point ......... 6.99 set AR43742 stainless hex head ........ 7.99 set

Water Neck GasketCorrect thermostat gasket for all GM 6 and 8 cylinder engines from 1955-57. Recommended when replacing original thermostat. G7141 gasket ........................................ 1.99 ea

1956-57 Water Temperature Sending UnitThe 1956-57 Chevy models had electrical temperature gauges while the 1955 had mechanical temperature gauges. These sending units are of the original design and fi t to work with your original temperature gauges. Screws into engine. TU4 1956.................................... 14.99 ea 1513321 1957.................................... 9.99 ea

AR43741AR13741

ThermostatChoose the thermostat that you need depending on your particular climate or engine requirements. G7137 160 degrees ............................ 7.99 ea G7138 170 degrees ............................ 10.99 ea G7139 180 degrees ............................ 8.99 ea G7140 195 degrees ............................ 8.99 ea

Thermostat Housings

1513321

G7137

VP2002

43631

16401

Thermostat Housings

High Flow ThermostatThe “Balanced Sleeve” design of these High Flow Thermostats equals out the pressure exerted on it by a high fl ow water pump allowing it to be solely regulated by coolant temperature. With the addition of a high performance water pump and high fl ow thermostat, you can expect a temperature drop of up to 25 degrees F on drives around town. 16400 160 degrees ............................. 21.99 ea 16401 180 degrees ............................. 21.99 ea

1947-90 Cool-View Glass ThermostatThis 2" thermostat assembly allows you to see when and how far the thermostat opens on a unique gradient scale without ever removing the radiator cap. Made from billet aluminum and the same specialized heavy borosilicate glass used in steam boiler systems. Fits all small and big block Chevrolet engines that use a non-bypass type thermostat, 1955 and up. Also fi ts all 216-292 straight 6 engines from 1947-90. Made in USA.Important: Index pointer and gradient scale are only included in sets with thermostat.Note: Bolts not included. VP2001 without thermostat .............. 109.99 ea VP2002 with 180 degree thermostat . 139.99 ea VP2003 with 195 degree thermostat . 139.99 ea

High Performance ThermostatThese high performance thermostats are designed to resist variations in coolant pressure, opening and closing only at the correct temperatures, regardless of engine RPM. Thermostats are made from brass and copper with a high grade steel frame for years of worry free operation. 43631 160 degree thermostat .............. 15.99 ea 43641 180 degree thermostat .............. 15.99 ea

1955-90 Silicone Sealed Thermostat GasketThis revolutionary gasket uses an aluminum gasket body with a silicone bead around crucial areas to seal irregularities between the intake manifold and thermostat housing. Compatible with all manifold materials on 1955-88 small block and 1965-90 big block Chevy engines. 738 1955-90 ...................................... 19.99 ea

Water Outlet RestrictorsIf coolant travels too fast, it doesn’t absorb enough heat inside the engine or properly cool down as it passes through the radiator. That’s why it is still important to restrict coolant fl ow in applications where a thermostat isn't desired. These restrictors come in a set of three with a 5/8", 3/4" and 1" hole to allow adjustment for optimum cooling. Each 2-1/8" plate is made from anodized aluminum and fi ts under the water outlet in place of the thermostat. 263440 restrictor plate set ..................... 7.99 ea

Temperature Sending Unit Wiring SetReproduction temperature sending unit wiring set which extends from the front light harness to the temperature sending unit. Includes: correct 24" insulator cover and 30" green wire with bullet, blade or button type terminals included. CA34620 1956-57 .............................. 12.99 set

1981-02 JET Low Temp ThermostatReduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. With the JET 180 degrees thermostat you get consistent engine cooling and a precise metering of water throughout the engine. Constructed of stainless steel. JT10170 1981-92 all V8 ............... 14.99 ea JT10174 1993-97 LT1................... 14.99 ea JT10175 1998-02 LS1 .................. 49.99 ea

JT10170

AC

, H

ea

ter

& C

oo

lin

g S

yste

m

264 Toll Free Order Line 800.854.1280

JJ

Electric Fan ControllerDakota Digital electric fan controller is designed for the ultimate in fl exibility, and to be a simple add-on in any application using an electric fan. Works with your existing water temperature gauge, operating from the temperature sending unit already installed. A dedicated sending unit can be installed for applications without a water temperature gauge. It is recommended that the compact box (3" x 2.75" x 1") be mounted inside the cab of the vehicle or alternate dry environment. Operation Range: 150-250 degrees F.

Important: Must use a second 70 amp relay for dual fan or two speed fan operation (#DD2702).Electric Fan Controller DD2700 with 70 amp relay ............. 119.99 ea Relay for Dual Fan Applications DD2702 70 amp relay ..................... 29.99 ea Dedicated Temperature Sensors DD2703 1/8" NPT sensor ................ 14.99 ea DD2704 3/8" NPT sensor ................ 14.99 ea DD2705 1/2" NPT sensor ................ 14.99 ea

Cooling System

Flex-a-lite Series 1300 Flex FanStainless steel blades fl ex at higher RPM’s which reduces drag, pumps extra horsepower, and improves fuel economy. For high-performance and heavy-duty applications. Flex-a-lite fan spacers are sold separately.Important: Not for use with fan clutch assembly. FL1307 red 17" diameter ........... 64.99 ea FL1308 red 18-3/8" diameter ..... 69.99 ea FL1309 red 19-1/2" diameter ..... 69.99 ea FL1317 blue 17" diameter ........... 59.99 ea FL1318 blue 18-3/8" diameter ..... 59.99 ea FL1319 blue 19-1/2" diameter ..... 61.99 ea

Flex-a-lite Fan SpacersUniversal replacement fan spacers for use on various applications. FL14544 1/2" silver ........................ 16.99 ea FL14548 1" silver ........................ 16.99 ea FL14556 2" silver ........................ 19.99 ea

bluered 1955-57 Fan BladeCorrect reproduction fan blade for all 1955-57 V8 and 6 cylinder engines. Measures 17.5" in diameter and is an exact replacement of your missing or damaged original. B1017 1955-57 all 6 cyl. and V8 ..... 39.99 ea

Flex-a-lite OEM Style Fan BladesReproduction fan blades for most GM applications. Manufactured by Flex-a-lite for performance and reliability these OEM style fan blades are to be used with a fan clutch. FL5717 17" ........................................ 44.99 ea FL5718 18" ........................................ 49.99 ea

Derale Rigid Race FansDerale high performance replacement fans feature durable construction with excellent balance and are rated for up to 8000 RPM. Manufactured with a universal heavy duty steel hub with a 5/8" pilot hole. Available with riveted steel or aluminum blades.Note: Not for use with a fan clutch. 17317 17" steel blade std rotation . 34.99 ea 17318 18" steel blade std rotation . 34.99 ea 17319 19" steel blade std rotation . 34.99 ea 17320 20" steel blade std rotation . 34.99 ea A5600101 15" alum blade std rotation . 44.99 ea A5600102 17" alum blade std rotation . 44.99 ea A5600103 18" alum blade std rotation . 44.99 ea A5600104 17" steel blade rev rotation 34.99 ea A5600105 18" steel blade rev rotation 34.99 ea A5600106 19" steel blade rev rotation 34.99 ea A5600107 20" steel blade rev rotation 34.99 ea

17317 A5600101

Cooling System

FL5717 FL5718

FL14544

Derale Flex FansThese aluminum and stainless fan blades are rated up to 7000 RPM and have chrome plated hubs. They feature a narrow blade design for good airfl ow in tight space applications. Embossed center hubs and four rivet blade attachment provide increased strength. 9217 17" chrome stainless blade ... 49.99 ea 9417 17" red aluminum blade 44.99 ea 9517 17" blue aluminum blade 44.99 ea 9218 18" chrome stainless blade ... 49.99 ea 9418 18" red aluminum blade 44.99 ea 9518 18" blue aluminum blade 44.99 ea

blueredchrome

Rubber Fan SpacersRubber spacers are used with Champion Series electric fans for proper spacing from the radiator. MF112 ................................................... 4.99 set

Adjustable Fan Temperature SensorTurn your electric fan on at whatever your desired temperature is with this adjustable temperature sensor. Sensor adjusts from 180-240 degrees and helps prevent overheating in performance vehicles when driving at low speeds or when idling for long periods. 346932 180-240 degrees ..................... 42.99 ea

Billet Aluminum Fan BracketsUse this premium billet aluminum bracket set to mount your 14" or 16" Champion or Challenger Series fan. The set features four adjustable side angle brackets that attach to the side fl ange of the radiator. Mounting hardware is included. MF105 ................................................ 45.99 set

Universal Fan Bracket Strip SetThis bracket set is used to mount your Champion or Challenger Series fan. Install the fan’s 90 degree mounting feet (included with fan) to these four 7.25" long strips for solid support. Mounting hardware is included. MF104 ................................................ 19.99 set

Cooling System Zinc AnodeZinc anode is found in heavy duty and marine applications to protect cooling systems from corrosion due to electrolysis or coolant additive failure/breakdown. This simple component allows the electrolysis process to “eat” the zinc rather than the aluminum parts of your cooling system. Designed to replace the drain petcock in your radiator, or any 1/4" NPT hole along the cooling system. FL32060 ............................................... 19.99 ea

Temperature Sending Wire Cloth InsulatorThis 3/16" i.d., 5/16" o.d. replacement cloth insulator, keeps your temperature sender harness well insulated from engine heat. Sold per foot, 2-3 feet required per vehicle. K0163 .................................................. 1.50 ft

DD2700

D Digitalakota DigDDakota Digitalakota Digital

• Includes 70 amp relay• Fully programmable “fan on/off” temperatures• Timed fan operation after the engine has been shut down• Full digital LED display

JJ

AC

, Hea

ter

& C

oo

ling

Syste

m

265www.classicindustries.com

Fan ClutchesFan clutch replacements manufactured by Flex-a-lite for performance and reliability.A great value on a quality fan clutch.

FL5537 small block short water pump 59.99 ea FL5537 big block short water pump 59.99 ea FL5555 small block long water pump . 59.99 ea FL5555 big block long water pump . 59.99 ea

Cooling System

FL5537

Cooling System

1955-57 Fan Clutch To Water Pump StudsStuds used to attach a fan clutch to the water pump on 1955-57 six and eight cylinder models. Each stud set includes four 5/16" double thread pitched studs with four lock washers and nuts. 1256622 1955-57 ................................ 12.99 set

Flex-a-lite Syclone Electric Fan The amazing Flex-a-lite Syclone electric fan is the most effi cient S-Blade fan blade on the market! This quiet fan mounts to the core and can be used to push or pull air through the radiator. The higher torque (17 amp) motor produces 2500 cfm of air fl ow, making these fans strong enough to replace your belt driven fan and fan clutch to gain more horsepower and torque. The sweep style blades squeeze out the maximum air fl ow possible. 16" fan, 16-5/8" x 15-3/4" x 4" mount. FL398 ............................................... 159.99 ea

Flex-a-lite Black Magic S-BladeRecover up to 17 HP and INCREASE YOUR MILEAGE by replacing the old belt-driven fan! Computer-engineered blades run quietly and effi ciently. Ring fan provides better blade support for impact resistance. The advantages of installing this universal fan include: reduced drag on engine, improving mileage. Frees up serious horsepower. Consistent cooling, regardless of engine rpm. Easy bolt-on installation. Moves 3000 cfm. Fits vehicles with 16" and wider radiator cores. Universal mounting brackets included. 16" fan, 18" x 16" x 4-1/4" mount. FL160 ............................................... 319.99 ea

Champion Series Low Profi le Performance FansThese Champion Series performance fans are the lowest profi le of medium and high performance fans on the market. Quiet, reversible S-blade design gives you the choice of using it as a puller or a pusher fan. Manufactured from glass-fi lled nylon. Includes powerful sealed motor, four 90 degree mounting feet, mating locking pigtail and rubber spacers. Recommended wire harness, temperature switch, and adjustable thermostat sold separately.Medium Performance FansMF123 12" x 2.48" 1155 cfm ..... 114.99 ea MF146 14" x 2.87" 1555 cfm ..... 119.99 ea MF166 16" x 2.87" 1810 cfm ..... 144.99 ea High Performance Fans MF122 12" x 3.19" 1565 cfm ..... 134.99 ea MF142 14" x 3.19" 2135 cfm ..... 139.99 ea MF163 16" x 3.19" 2170 cfm ..... 149.99 ea

Challenger Series Performance FansThese Challenger Series performance fans are economical, yet versatile enough for high performance or daily drivers. Quiet, reversible S-blade design will operate as a puller or a pusher fan. Manufactured from glass fi lled nylon. Includes: four 90 degree mounting feet, mating locking pigtail and rubber spacers. Recommended wire harness, temperature switch, and adjustable thermostat sold separately.High Performance Fans MF136 13" x 3.82" 1560 cfm ...... 91.99 ea MF107 16" x 3.87" 1950 cfm ...... 95.99 ea MF162 16" x 4.35" 2200 cfm ...... 101.99 ea

MF163

MF107

15" Electric Fan With ThermostatYour stock fan robs your engine of up to 15 or more horsepower! Replace it with a rugged, universal-fi t fan equipped with an adjustable 180-240 degrees F. thermostat. Bolts to your radiator supports using sturdy brackets. With a heavy-duty motor, highly angled blades, and 15" diameter, this unit pulls up to 2800 cfm of air, cooling vehicles with up to 250+ HP (without air) and 220+ HP (with air). Overall: 18" x 16-1/8" x 4", amp draw – 14 amps. 67017 ................................................ 164.99 ea

High Performance Electric FansThese reversible fans help prevent overheating in stop-and-go traffi c, designed to fi t the most popular cars and trucks, increases gas mileage, improves engine performance, frees the water pump pulley for more RPM, installs in minutes with simple hand tools, 10", 12", 14", and 16" fans are reversible (mounts in front or back of radiator). Ultra thin design to fi t cramped locations. Reinforced glass fi lled polypropylene blade and plastic housing for minimized weight. Nylon tie mounting kit included. Nominal fan size is based upon approximate overall assembly diameter.Plain Shroud 67010 10" x 2.5" 1000 cfm ......... 46.99 ea 67012 12" x 2.5" 1200 cfm ......... 54.99 ea 67014 14" x 4" 1650 cfm ......... 64.99 ea 67016 16" x 4" 2100 cfm ......... 65.99 ea Shroud with Red Bow Tie D141641 10" x 2.5" 1000 cfm ......... 54.99 ea D141642 12" x 2.5" 1200 cfm ......... 59.99 ea D141644 14" x 4" 1650 cfm ......... 74.99 ea D141646 16" x 4" 2100 cfm ......... 79.99 ea

67010

Flex-a-lite S-Blade Electric Fans Flex-a-lite S-Blade electric fans are the most effi cient S-blade fans on the market. These quiet fans mount to the core and can be used to push or pull air through the radiator. The high torque motor makes these fans strong enough to replace your belt driven fan and fan clutch, freeing up horsepower and torque. The sweep style blades squeeze out the maximum air fl ow possible.12-5/8" x 11-3/4" x 2-5/8" Mount FL392 12" fan 7.7 amp, 925 cfm .... 109.99 ea 14-1/2" x 13-7/8" x 3-3/4" Mount FL394 14" fan 9.2 amp, 1530 cfm .. 114.99 ea 16-5/8" x 15-3/4" x 4" Mount FL396 16" fan 13.5 amp, 1980 cfm 139.99 ea

FL396

1955-57 Fan To Fan Clutch BoltsBolts used to attach a fan to the fan clutch on 1955-57 six and eight cylinder models. These replicate original GM bolts with the correct markings. Bolts are sold in sets of four and include lock washers. 1256621 1955-57 ................................. 9.99 set

Adjustable Fan Temperature SwitchThe adjustable temperature switch allows a wide range of temperature settings for the Champion or Challenger Series electric fan. MF110 ................................................ 21.99 set

AC

, H

ea

ter

& C

oo

lin

g S

yste

m

266 Toll Free Order Line 800.854.1280

JJ

Cooling System

Painless F5 Fan ControllerThis state-of-the-art fan control system uses pulse width modulation to control electric fan speed from 50% up to 100%. A three position toggle switch lets you choose between normal operation, 100% fan speed, or turn the fan(s) off. An AC compressor override that runs the fans at 100% duty cycle if air conditioning is kicked on. Includes a solid state controller rated for engine bay use, 3/8 NPT threaded temperature sensor, large gauge fan wires and labeled vehicle integration wire harness, mounting hardware, and 70 amp fuse and connectors. The F5 Dual Fan Controller is rated to control two 35 amp cooling fans. The F5 Single Fan Controller is rated to control one 70 amp cooling fan. 30140 dual fan controller .................. 269.99 set 30141 single fan controller ............... 269.99 set

Dual Fan – Dual Activation Fan Relay SetThe dual activation cooling fan relay kit by Painless Performance is exactly what you need to run dual fans off of a thermostatic switch and when your AC is on. Installation takes just a few minutes and your cooling fan will come on when the engine reaches the preset temperature of the thermostatic switch or when the AC is turned on. Set includes: three 40 amp relays with mounting bases, one fuse holder with 70 amp fuse, pre-terminated and printed wire harness, and your choice of thermostatic switch on/off temperatures. Sets include: 1/2"NPT to 3/8"NPT adapter, mounting hardware, insulated terminals and detailed instructions. 30116 on 200F, off 185F ................ 148.99 set 30117 on 185F, off 175F ................ 139.99 set 30118 on 205F, off 190F ................ 129.99 set

Electric Fan Wire Harness With Sending Unit And Relay Set

This set is designed to allow worry-free automatic operation of Champion or Challenger Series electric fans. Includes a heavy gauge wire harness, relay, weatherproof fuse, electrical connectors and 185 degrees or 195 degrees temperature sending unit.For Carbureted Vehicles MF102 w/185° temperature sender .. 61.99 set For Fuel Injected Vehicles MF103 w/195° temperature sender .. 61.99 set Replacement Sending Units MF108 185° carbureted engines ... 21.99 ea MF109 195° fuel injected engines 21.99 ea

MF102

Electric Fan Wire HarnessWith Adjustable Switch And RelayThis set is designed to allow a wide range of temperature adjustments for Champion or Challenger Series electric fans. Includes a heavy gauge wire harness, relay, weatherproof fuse, electrical connectors and adjustable temperature switch.

MF100 with adj. temperature switch .... 61.99 set Delayed Cooling System ShutdownTimed cooling system shutdown features adjustable relays that keep power to the cooling fan and electric water pump (if equipped) when the key is shut off. This reduces the block temperature as much as possible without the risk of draining the battery. This is a timed circuit and does not use a thermostat or other fan control to operate. TF900632 .......................................... 149.99 ea

“Ice Box” Cooling Fan ControlAvailable as a single fan control or dual fan, 2-speed fan control unit. The sensor is simply tightened under an intake or water pump bolt. It can then be adjusted to your exact preference for on and off temperature. It is equipped with an AC Request system to turn the cooling fan on whenever the AC Compressor engages (this feature does not have to be used). The dual fan control can operate two fans at different temperatures or a single 2-speed fan at different temperatures. Features exclusive lug sensor that mounts under almost any engine bolt. Each unit has a fully adjustable operating range of 140-230 degrees.Note: *With Walker 2-speed fans. TF900633 single control ................... 124.99 ea TF900634 dual control ...................... 139.99 ea TF900635 * dual control ...................... 139.99 ea

TF900634

Cooling Fan ShutdownThis cooling fan shutdown kit shuts down your electric cooling fan above 50-60 MPH to improve engine cooling by preventing the electric fan from fighting airflow through the radiator at highway speeds. The unit is adjustable and may be overridden by using the supplied dash mounted toggle switch. This kit is designed to be used with the supplied signal generator which must be installed into the speedometer cable. TF900627 ......................................... 189.99 ea

Fan-Thom/Fan-Thom II Electric Fan RelayAn absolute necessity if adding an on/off switch to your electric fan circuit. Choose from the standard fan relay or the weatherproof relays which provide complete protection from the elements and ensure reliable and dependable performance utilizing heavy duty waterproof relays, weatherproof circuit breaker covers and extreme condition weatherproof shrinkable crimp-on terminals.

Fan-Thom I 30101 standard ....................................... 39.99 set 30130 weatherproof ............................... 65.99 ea 30128 weatherproof w/195º/185º switch 114.99 ea 30129 weatherproof w/185º/175º switch 109.99 ea

Fan-Thom IIDon’t want to probe your radiator? The Fan-Thom II comes with a threaded thermostat that screws into the engine block or manifold for a professional installation. Thermostat thread size: 3/8"-18NPTF fitting. 30102 195º on/185º off ......................... 84.99 set P30103 185º on/175º off ......................... 84.99 set Replacement Thermostats 30110 195º on/185º off ......................... 47.99 ea 30111 185º on/175º off ......................... 47.99 ea

Adjustable Electric Fan Thermostat SetDesigned to allow a wide range of temperature adjustments for your electric fan to set the precise temperature desired for fan activation. The mounting bracket is made of brushed stainless steel for good looks and durability. The set includes: the thermostat with bracket, a 30 amp relay, a 30 amp circuit breaker for overall protection, wiring, terminals, and mounting hardware.Specs on Adjustable Fan Thermostat:Temp range: -32 degree to 248 degree FAccuracy: +/-7.3 degree FDifferential: 7.3 degrees +/-3.6 degree F.Note: Temperature refers to the temp of the capillary tube, not the coolant temp. 30104 ............................................... 114.99 set 30112 without relay .......................... 81.99 set

30104

30102

Cooling System

30140

30116

1983-95 JET Fan SwitchThe JET Fan Switch turns on the vehicle’s cooling fan at a lower temperature than stock for improved performance and engine longevity. Cooler operating temperatures increase horsepower by providing a denser air/fuel mixture. Installation is simple replacement of the stock sensor. The JET Fan Switch turns on at 195 degrees and turns off at 185 degrees. JT60600 1983-92 all V8 ................. 41.99 set FK1000 1993-95 350 LT1.............. 64.99 set

JT60600 FK1000

JJ

AC

, Hea

ter

& C

oo

ling

Syste

m

267www.classicindustries.com

Water Pump BoltsReplace your original bolts with these chrome plated or stainless steel bolts for your small block or big block engine. Sets include four bolts and washers. AK136A chrome short pump ...... 12.99 set AK135A chrome long pump ....... 12.99 set AK136B stainless short pump ...... 19.99 set AK135B stainless long pump ....... 19.99 set

Water Pump To Block GasketsReplacement water pump to block gaskets for early small and big block engines. Sold individually. 2 required per vehicle. G8337 small block .............................. 1.99 ea G8338 big block .................................. .99 ea

Small Block Chevy Water Pump SpacersThese handy spacers adapt an earlier short style water pump for proper pulley alignment in later long water pump applications. These are also great when using an aftermarket racing timing chain cover where water pump clearance is an issue. Made from satin fi nished aluminum. Bolts and gaskets included. H8207 1955-90 water pump spacers 81.99 set

Water Pump Components

Replacement Chrome Water PumpsEach water pump features a new casting with top quality bearing and excellent sealing. Each unit features the highest quality triple chrome plating of any pump on the market. Add a dash of fl ash to your engine.No exchange required.Small Block Water Pumps WP1354 short .................................. 119.99 ea WP1449 long ................................... 129.99 ea Big Block Water Pumps WP1448 short .................................. 131.99 ea WP1450 long ................................... 139.99 ea

WP1450

1955-57 Original Style Water PumpsRemanufactured or brand new water pumps for 1955-57 models with 6 or 8 cylinder engines. Remanufactured V8 water pumps feature correct casting numbers. The remanufactured pumps are rebuilt to “better than original” specifi cations using superior, internal components. New pumps are brand new castings using modern technology and materials. Each pump will install, look and function just like new.No exchange required.

Remanufactured Water Pumps6 Cylinder Water Pump 58684 4-1/8" hub height ................. 81.99 ea 58128 5-1/4" hub height ................. 41.99 ea 8 Cylinder Water Pump – 265, 283 58638 casting #3736493 ................. 69.99 ea 58635 casting #3782608 ................. 84.99 ea

New Water Pumps6 Cylinder Water Pump 5511132 5-1/4" hub height ................. 47.99 ea 8 Cylinder Water Pump 5511167 1 outlet, 4 hole hub ............... 29.99 ea

Stewart Components Stage 1Cast Iron High Flow Water PumpsStewart Components Stage 1 pumps use brand new, original equipment iron castings that are precision machined to be compatible with stock lines and brackets, and are internally engineered for performance and reliability. Applications suitable for use on V-belt or serpentine belt systems are available. These water pumps feature a 3/4" heavy duty bearing.Small Block, Clockwise Rotation WP12103 short 5/8" shaft ........... 94.99 ea WP12203 short 3/4" shaft ........... 99.99 ea WP13113 long 5/8" shaft ........... 99.99 ea Big Block, Clockwise Rotation WP11104 short 5/8" shaft ........... 109.99 ea WP11113 long 5/8" shaft ........... 99.99 ea Big Block, Counter Clockwise Rotation WP11105 short 5/8" shaft ........... 99.99 ea

Stewart Components Stage 2Aluminum High Flow Water PumpsStewart Components Stage 2 pumps use brand new, 356-T6 heat treated aluminum casting that are precision machined to be compatible with stock lines and brackets. These pumps feature several signifi cant performance upgrades compared to their Stage 1 pumps for maximum performance. Applications suitable for use on V-belt or serpentine belt systems are available. These water pumps feature a 3/4" heavy duty bearing.Important: These small block water pumps require the use of a high fl ow, modifi ed thermostat due to the elimination of the factory bypass holes in the Stage 2 pumps. See listings below for available temperatures.Small Block, Clockwise Rotation WP22103 short 5/8" shaft ... 169.99 ea WP22203 short 3/4" shaft ... 169.99 ea WP23113 long 5/8" shaft ... 169.99 ea Big Block, Clockwise Rotation WP21104 short 5/8" shaft ... 189.99 ea WP21113 long 5/8" shaft ... 179.99 ea Big Block, Counter Clockwise Rotation WP21105 short 5/8" shaft ... 189.99 ea High Flow Modifi ed Thermostats WP300 160 degrees ................... 24.99 ea WP301 180 degrees ................... 24.99 ea WP302 195 degrees ................... 24.99 ea

WP12203

5511167

WP23113

E8820

cast fi nish black fi nish endurashine fi nish

Water Pumps/Components

1955-57 Water Pump Rebuild SetAll the necessary parts to rebuild your original water pump. These components are required when rebuilding an original water pump designed for 1955-57 models. Using all the components in this rebuild set will insure that your original water pump will work and operate effi ciently. WPK001 1955-57 V8 .................... 62.99 set

K0179K0177

Water Pump Mounting SetReproduction water pump mounting bolts. Note: *Includes RH stud for ground strap. K0177 * big block short water pump 9.99 set K0178 * small block short water pump 9.99 set K0179 big block long water pump . 9.99 set K0185 small block long water pump . 9.99 set

AK136A

Water Pump Bolt SetsARP’s water pump bolts are available in both polished stainless steel or black oxide fi nish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Made in USA. AR13322 black oxide hex head ......... 14.99 set AR13321 black oxide 12 point .......... 16.99 set AR43322 stainless hex head ......... 24.99 set AR43321 stainless 12 point .......... 24.99 set

1955-57 Water Pump BoltsThese water pump bolts are the correct style for 1955-56 V8 models. They feature the correct TR markings on their heads as original. 1955-56 sets include: one 2-3/4" bolt, three 1-15/16" bolts and four lock washers. 1957 sets include: one 2-3/4" bolt, two 1-15/16" bolts, one 1-15/16 studded bolt and four lock washers.TF600290 1955-56 ............................ 9.99 set TF600291 1957.................................. 14.99 set

TF600290

G8337

AR43321

1955-57 Edelbrock Water PumpsThese “super cooling” pumps are computer designed to deliver more fl ow at a higher velocity. Precision cast powdered metal impellers have extra large vanes for the maximum fl ow rate possible, ensuring adequate pressure and volume even at lower engine speeds. They feature a 5/8" pilot shaft.Small Block Short Water PumpsE8810 1955-57 cast fi nish ............. 234.99 ea E8820 1955-57 polished fi nish ...... 324.99 ea E88103 1955-57 black fi nish .......... 279.99 ea E88104 1955-57 endurashine fi nish 311.99 ea

AC

, H

ea

ter

& C

oo

lin

g S

yste

m

268 Toll Free Order Line 800.854.1280

JJ

Electric Water Pump Drive SetThe electric water pump drive set was designed to alleviate the power drag produced by conventional pulley drive units. A heavy-duty electric motor, turning at approximately 1500 RPM. This unit can be turned on and off manually, during a run, or before and afterwards, even with engine off. The set is complete with motor mounting bracket, extra long bolts, spline pulleys, drive belt, wiring and switch. You supply the fan of your choice.Note: *Features a larger motor pulley and longer belt to drive pump approximately 40% faster.

Water Pump Drive Set MR4333 Chevrolet V8, & 90º V6 .... 99.99 set MR4433* Chevrolet V8, & 90º V6 .... 144.99 set

Service/Replacement PartsMR4333/MR4433 MR4394 mounting plate ................... 24.99 ea MR4396 12 volt DC electric motor .. 74.99 ea MR4399 large water pump pulley .... 24.99 ea MR4333 MR4397 drive belt ............................ 29.99 ea MR4398 small pulley, 10 spline ....... 29.99 eaMR4433 MR4393 drive belt ............................ 24.99 ea

Water Pump Components

MR4333

MR4396 MR4398

66225BK

Chevrolet Electric Water PumpsEliminates unnecessary weight and impeller-drag experienced at high RPM, pumps up to 35+ gallons of water per minute, and delivers the cooling that can make the difference between a win and second place! Durable, but light-weight die-cast aluminum, epoxy powder coated for corrosion resistance in the color of your choice. Race or street. Draws 6 amps. Mounting hardware and fi tting for water pump is included.

Small Block Water PumpsWithout Red Bow Tie 66225B blue ................................... 204.99 ea 66225BK black ................................. 204.99 ea 66225CR chrome .............................. 254.99 ea 66225P polished ............................ 234.99 ea 66225R red ..................................... 204.99 ea With Red Bow Tie D141653 blue ................................... 224.99 ea D141651 black ................................. 229.99 ea D141650 chrome .............................. 274.99 ea D141654 polished ............................ 249.99 ea D141652 red ..................................... 224.99 ea

Big Block Water PumpsWithout Red Bow Tie 68230B blue .................................... 219.99 ea 68230BK black................................... 219.99 ea 68230C chrome ............................... 269.99 ea 68230P polished .............................. 249.99 ea 68230R red ...................................... 219.99 ea With Red Bow Tie D141673 blue .................................... 234.99 ea D141674 black................................... 234.99 ea D141671 chrome ............................... 289.99 ea D141670 polished .............................. 269.99 ea D141672 red ...................................... 234.99 ea

Water Pumps/Components

Electric Water Pump RelayThese relays provide maximum battery voltage to maximize cooling efficiency and to protect the main electrical system from damaging amperage overloads. Choose from a standard water pump relay or a weatherproof water pump relay which is perfect for the harsh weather conditions, this relay set provides complete protection from the elements and ensure reliable and dependable performance. These sets utilize heavy duty waterproof relays, weatherproof circuit breaker covers and extreme condition weatherproof shrinkable crimp-on terminals.50106 standard .................................. 44.99 ea 30132 weatherproof .......................... 65.99 ea

50106 30132

1959-63 Water Pump Pulley For 348 & 409Reproduction water pump pulley set for 1959-63 348 engine equipped with High Lift cam; also correct for 409 engines. Manufactured exactly as original including proper original GM numbers stamped in the front pulley. Made in the USA.Individual Components GH1007 1959-63 rear pulley ................ 99.99 ea GH1009 1959-63 front pulley (3724816) 89.99 ea GH1011 1959-63 pulley reinforcement 4.99 ea Buy The Set and Save! GH9001 3 piece set ................ 192.99 kit

Chrome Water Pump PulleysReproduction water pump pulleys in chrome fi nish for various applications.

Small BlockSingle Groove Pulley T9600 short pump, 7.1" o.d. .............. 29.99 ea T9604 long pump, 6.3" o.d. ............... 29.99 ea Double Groove Pulley T9601 short pump, 6.4" o.d. .............. 19.99 ea T9605 long pump, 6.3" o.d. ............... 39.99 ea

Big BlockDouble Groove Pulley T9723 long pump, 6.3" o.d. ............... 49.99 ea

14769 G2132

Warning: Concerning water pump pulleys Stock replacement, aftermarket stamped steel or cast iron pulleys are not designed to exceed 400 horsepower or 6000 RPM. Using reproduction pulleys on engines in excess of these limits may result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body parts. Classic Industries® assumes no liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding the recommended RPM limitations.

Original Style Water Pump PulleysReproduction and original GM water pump pulleys for 6 cylinder, small block and big block engines. Available in a variety of diameters and belt confi gurations.

Six Cylinder EnginesSingle Groove Pulley 14769 short pump, 7-1/8" o.d. .......... 41.99 ea

Small Block EnginesSingle Groove Pulley 14769 short pump, 7-1/8" o.d. .......... 41.99 ea Double Groove Pulley G8356 short pump, 6-1/4" o.d. .......... 81.99 ea G2132 long pump, 6-1/4" o.d. ........... 117.99 ea

Big Block EnginesSingle Groove Pulley KW394 5-7/8" o.d. ............................... 49.99 ea 14543 6-1/4" o.d. ............................... 44.99 ea Double Groove Pulley GH1026 short pump, 7-1/4" o.d. .......... 139.99 ea G2132 long pump, 6-1/4" o.d. ........... 117.99 ea

GH9001

1962-79 Gilmer Belt Drive SetThese Gilmer drive sets for small block street/strip engines are machined from billet aluminum and prevent slippage and belt throwing at high RPM. Designed to work with factory alternator brackets. Set includes crank pulley, water pump pulley, alternator pulley and a 1-1/2" wide belt.Note: Not for vehicles with power steering or AC. 87101 283-400 with short water pump 183.99 set 87111 283-400 with long water pump 197.99 set

87101

JJ

AC

, Hea

ter

& C

oo

ling

Syste

m

269www.classicindustries.com AC Parts

Keep Your Tri-FiveWith Air Conditioning Sets From Classic!

If you own a 1955-57 Chevy, you can install a complete behind-the-dash air conditioning system, including a heater and defroster, while preserving an original appearance. Feel the comfort of cool air without sacrifi cing the original look of your dash! The all-new, Vintage Air Gen-IV, SureFit Tri-Five air conditioning, heating and defrost systems are a giant leap forward in performance aftermarket climate control systems. The Gen-IV systems feature all electronic controls requiring no cables, capillary tube or vacuum connections. They are truly “fl y-by-wire” systems that use separate heating and cooling coils for superior performance. The internal air control doors are servo operated to provide infi nite dash, fl oor and defrost blending.

961057

1955-57 Gen IV Electronic Sure Fit SystemGet cool air for your hot ride! This comprehensive set features fully electronic fl y-by-wire controls, high capacity plate and fi n cooling coil, brass parallel-fl ow heater coil, and an evaporator assembly that mounts completely behind the stock dash. Comes with SuperFlow condenser, compressor, mounting brackets, drier, safety switch, preformed aluminum lines, fi rewall cover plate and all mounting hardware... Everything you need to give your classic a modern AC and heating system. These Sure Fit sets are designed to install with minimal drilling and no fabrication required. Available as a complete set with center vent or a complete set with 4 vents (no molded center vent – allows use of 4 individual louver locations).Note: Special order, must be prepaid. Shipped double oversize.

Set with Center Vent 96155PCU 1955-56 ................................................................... 1349.99 set 961057 1957 ........................................................................ 1346.99 set

Set with Four Vents 96156PCU 1955-56 ................................................................... 1349.99 set 961058 1957 ........................................................................ 1346.99 set

OS2

Air Conditioning

Sanden AC CompressorsWhen retro-fitting a modern AC system, Sanden SD508 and SD7H AC compressors are the first choice. Not only do they produce colder air than the original compressors, they require less horsepower to turn. Rated for continuous duty at 6000 RPM. Available in natural or polished finishes.SD508 AC Compressors R134A AP4510 natural, 2-groove v-belt .................................................. 204.99 ea Z6161A polished, 2 groove v-belt ................................................ 264.99 ea Z6162A polished, serpentine belt ................................................. 264.99 ea SD508 AC Compressors R12 Z6161 polished, 2 groove v-belt ................................................ 258.99 ea Z6162 polished, serpentine belt ................................................. 289.99 ea SD7H AC Compressors R134A AP7312 natural, 2 groove v-belt................................................... 224.99 ea

AP4510

R-12 To R-134a Retro-Fit SetThis set provides the necessary components (except receiver/drier) to convert your R-12 AC system to use R-134a refrigerant. Includes an o-ring set, 12 oz. Ester oil, service port adaptors, service warning label. Receiver/drier must be ordered separately. AP7134A ....................... 26.99 set

1955-57 Original Style AC BeltsOffi cially licensed by GM, they feature indented imprinting of the correct GM emblem, part numbers, broadcast code (where applicable), belt size (where applicable), manufacturer’s symbol and construction codes. These authentic looking reproductions are cloth wrapped. The fi nishing touch to any serious restoration and a great way to gain points over your car show competitors. You don’t want something as simple as a worn or incorrect belt to keep you from winning your next trophy, and you certainly don’t want to be left stranded on the way to your next show. Offi cially licensed by GM! TF700157 1955 ................................................................................ 34.99 ea TF700158 1956 ................................................................................ 34.99 ea TF700159 1957 ................................................................................ 34.99 ea

Headers AC Relocation BracketThis steel air conditioning bracket relocates the air conditioning compressor to the left of the engine. Designed to allow clearance for headers in specifi c pre-1979 small block Chevy applications. 7608 1955-79 ................ 24.99 ea

Coolant System ProtectorImpurities in water can cause rust and corrosion inside the radiator, water pump, and cylinder heads. Over time, this can lead to a loss of cooling effi ciency. Joe Gibbs Driven Coolant System Protector stops the adverse effect of hard water to help prevent cooling system damage. JG1330 12 oz. bottle ...... 9.99 ea JG1331 case of 12 .......... 107.99 ea

Purple Ice Super CoolantPurple Ice is a high performance, synthetic, radiator coolant additive. It reduces engine heat, fosters optimum coolant fl ow and lubricates the water pumpseals. Purple Ice should always be used in conjunction with antifreeze in regions where freezing temperatures occur. Purple Ice is recommended for any water/glycol pressurized cooling system, including those using the traditional green silicate based glycols or the newer OAT or HOAT based glycols. RP01600 12 oz. bottle 9.99 ea RP12600 case of 12 .... 107.99 cs

System Features:• Fly-By-Wire Fully Electronic Servo Motor Controls No Cables or Capillary Tube To Route• Infi nite “Just Right Temperature” Air Blending• Infi nite Blower Fan Speed Adjustment (3-Speed Fan For '57)• High Volume Dehumidifi ed Defrost Mode• Separate High Capacity Aluminum Plate and Fin Cooling Coils• Copper/Brass Cuprobreze™ Parallel Flow Heater Coil• Mounts Behind The Dash• AC Exits Through Center And Side Vents• Uses Your Factory System Controls With Vintage Air’s Exclusive Electronic Cable Converters• Flat Steel Firewall Cover Panel (Stamped Oem Style On 57)

AC

, H

ea

ter

& C

oo

lin

g S

yste

m

270 Toll Free Order Line 800.854.1280

JJ

AC / Heater Parts

1955-57 Reproduction Heater CoresReproduction heater cores for 1955-57 models. These feature copper and brass construction for the ideal heat dissipation to warm and defrost your classic. Mounting plates available separately. Made in the USA.Heater Cores TF600167 1955-56 ............................ 189.99 ea TF600168 1957 ................................. 189.99 ea Mounting Plates TF600169 1955-56 ............................ 14.99 ea TF600170 1957 ................................. 14.99 ea

1957 Air Inlet Drain Tube GrommetsWithout these grommets, the drain tube will become loose and rattle and may be lost. TF300261 1957..................................... 2.99 pr

AC/Heater Parts

1955-57 Heater Control ValvesReproduction heater control valves for 1955-57 models. Heater valves are supplied without capillary tubes, which can be re-used if necessary (1955 models only.) TF500220 1955-56 .............................. 69.99 ea TF600115 1957 ................................... 69.99 ea

TF500220

1955-57 Aluminum Heater CoresAluminum heater cores for 1955-57 models. These all-new heater cores are exactly like originals except they are manufactured in aluminum for lighter weight and improved heat dissipation. 1957 heater cores include mounting plate. TF600231 1955-56 ............................ 109.99 ea TF600232 1957 ................................. 129.99 ea

TF600167

TF600168

1957 Deluxe Heater Blower Motor HoseReproduction deluxe heater blower motor hose for 1957 models. This hose fi ts between the deluxe blower motor and the inner fender duct. Reproduction hoses are manufactured to original Chevrolet specifi cations with quality vinyl plastic on a steel spring. TF600106 1957 .................................... 16.99 ea

OE Style Cloth Defroster And Heater HoseReproduction defroster and heater hoses are the original style, cloth-like cover over spiraled wire. These will qualify for show as original. Offered in various diameters to meet your under dash needs. Sold in 3 foot lengths. 13901 1-1⁄2" diameter ........................ 21.99 ea 13902 1-3⁄4" diameter ........................ 21.99 ea 13903 2" diameter .............................. 24.99 ea 13904 2-1⁄2" diameter ........................ 24.99 ea 13905 3" diameter .............................. 27.99 ea 13906 3-1⁄4" diameter ........................ 27.99 ea 13907 3-1⁄2" diameter ........................ 27.99 ea 13908 3-3⁄4" diameter ........................ 27.99 ea 13909 4" diameter .............................. 32.99 ea

13904

13914

TF600231

TF600232

1957 Heater Control Valve Block Off PlateThis steel plate mounts to the fi rewall to block off the opening for the heater control valve. Block off plate sets are painted semi-gloss black and include a foam gasket with mounting hardware.TF600275 1957 block off plate set ... 5.99 set TF600276 1957 foam gasket only .... 1.99 ea

TF600275

Evaporator Case SealsHelp avoid leaks with these evaporator case seals to protect the investment you’ve made in your AC system. AP0250 ................................................. 6.99 set

1957 Air Duct Drain TubeReproduction inner fender drain tube for all 1957 models. This tube is bolted to the air duct and helps drain moister that gets into the air duct system. Two required per vehicle.TF401114 1957 LH or RH .............. 18.99 ea

AC Hose Bubble CrimperWhen you need to fabricate specially-sized hoses, this easy-to-use bubble crimping kit gets the job done at home with professional results. Includes: the crimper, crimping dies for #6 (3/8"), #8 (1/2"), #10 (5/8"), #12 (3/4") fi ttings and an easy storage plastic carrying case.K2469 ................................................ 269.99 set

Plastic Replacement Defroster Duct HoseThis is a plastic replacement fl exible hose under the dash that is for the defroster, heater and fresh air systems. These are for those who need the right hose for the job and do not need an original style hose. Hose is 72" in length, cut to desired length.13916 1-1/2" ...................................... 28.99 ea 13910 2" ............................................. 24.99 ea 13911 2-1⁄4" ....................................... 24.99 ea 13912 2-1⁄2" ....................................... 21.99 ea 13913 2-3⁄4" ....................................... 34.99 ea 13914 3" ............................................. 28.99 ea 13917 3-1⁄4" ....................................... 42.99 ea 13915 3-1⁄2" ....................................... 42.99 ea 13918 4" ............................................. 38.99 ea

JJ

AC

, Hea

ter

& C

oo

ling

Syste

m

271www.classicindustries.com

1957 Heater Defroster SealThis seal is located between the heater distributor assembly and the dashboard vent assembly, dries out and needs periodic replacement. The defrost function will not operate without this seal. TF600107 1957..................................... 8.99 ea

1957 Fresh Air Duct Seal SetThe connector between the front duct assembly and the rear duct and valve assembly. TF600101 1957 ................................... 11.99 ea

1957 Blower Motor Sleeve SealThese seals are located between the heater blower and transition assembly. This rubber sleeve fi ts on the base of the shaft. TF600102 1957 .................................... 5.99 ea

1955-57 Standard & Deluxe Heater Seal SetReproduction standard and deluxe heater seal sets for 1955-57 models. If your car is equipped with control levers, you require a deluxe seal kit. If you have a fan knob, you require a standard seal.Note: *Includes defroster seal. TF600211 * 1955-56 standard .......... 19.99 ea TF600103 * 1955-56 deluxe ............. 19.99 ea TF600104 1957 standard .......... 14.99 ea TF600105 1957 deluxe ............. 15.99 ea

TF600104

Deluxe Heater Assembly Fastener SetIncludes all of the clips, sheet metal screws and machine screws to do the job right. TF600116 1955-56 deluxe heater ..... 4.99 set TF600117 1957 deluxe heater ..... 4.99 set

1955-56 Heater Control LeversReproduction heater control levers for 1955-56 models. TF600112 1955................................... 20.99 pr TF600113 1956................................... 21.99 pr

TF600113

AP3155

TF600206

TF600108

TF600117

TF600109

1955-57 EZ-Slider Heater Cable SetsThese heater cables with Polyethylene lining provide reduced resistance, maximum fl exibility and instant response even during severe weather conditions. The outer shell can be removed to create an original appearance. AP3155 1955 without AC ............. 29.99 set AP3156 1956 without AC ............. 29.99 set AP3157 1957 without AC ............. 43.99 set

1955-57 Blower SwitchMaximize your system with this improved switch featuring a rear harness set up that allows the resistor to be attached in the rear of controls. AP0555 1955-56 ................................. 36.99 ea AP0523 1957 ...................................... 43.99 ea

AP0555 1955-56 Vent And Defrost Control Cable SetWe know how hard it is to get old cables to function properly. Fear no more, we have the solution. A great looking and functional reproduction. Sold in pairs. Choose from smooth or ribbed knobs. Controls defrost and passenger side vents. TF500212 1955 smooth knobs ..... 67.99 set TF500213 1956 ribbed knobs ...... 67.99 set

TF500212

AC/Heater Parts

1955-57 Heater Cable Retainer ClipsThese clips are used to correctly connect the cables to your heater and vent assembly. Sets include screws.Deluxe Heater Cable Retainer Clip Sets TF600108 1955-56 5 piece ............ 24.99 set TF600109 1957 6 piece ............ 29.99 set Individual Heater Cable Retainer Clips TF600110 1955-57 straight tab ..... 6.99 ea TF600111 1957 offset tab ........ 6.99 ea

1955-56 Deluxe Heater Shaft And Spring SetReproduction deluxe heater shaft and spring set for 1955-56 Chevrolet passenger models. Includes: 1 pin, 1 spring, 1 retaining clip and 2 washers. These parts are hard to fi nd when you are restoring your heater controls. TF600209 1955-56 deluxe heater ....... 5.99 set

Reproduction Heater Blower MotorsNew reproduction blower motors for 1955-57 models. These motors are manufactured to meet or exceed OEM specifi cations for magnetic properties, design and performance, motor RPM and windings. Fans sold separately.With Air Conditioning TF600205 1955-57 3-speed – 2 wire 34.99 ea Without Air Conditioning TF600206 1955-57 2 wire ................ 44.99 ea

AC / Heater Parts