2016 - Philmac: The connection you can trust · PHILMAC 2016 PRODUCT PRICE CATALOGUE 3 Philmac are a provider of pipe connection solutions in the Plumbing, Utility, Industrial, Agricultural

PHILMAC 2016 PRODUCT PRICE CATALOGUE 1

2 0 1 6P R O D U C TP R I C EC A T A L O G U E

2 PHILMAC 2016 PRODUCT PRICE CATALOGUE

Philmac is a global leader in the design and manufacture of

specialist pipe fittings and valves, providing cost-effective solutions for the

transfer, control and application of water.

Philmac is part of The Aliaxis Group, a leading global manufacturer and distributor, primarily of plastic fluid handling systems used in residential and commercial construction, as well as in industrial and public infrastructure applications.

OTHER INFORMATION Philmac products have WRAS approval where relevant, for more information, please contact our Customer Service Team or your local Area Sales Manager.

Philmac BSP Treaded fittings are 16 Bar rated up to and including 2”. For sizes above this, they are suitable for 10 bar applications. Please refer to our Contacts page for details of our Customer Service and Area Sales Management teams.

QUALITY – Philmac UK operates an accredited Quality Management System to BS EN ISO 9001:2008 to ensure peace of mind for our customers.

For further information, please visit our website www.philmac.co.uk and/or the Philmac Academy, www.philmacacademy.co.ukto be available later in 2016

THE CONNECTION YOU CAN TRUST

CUSTOMER FOCUS The key to our success lies in the commitment to provide the highest quality service and support to our customers and end users through our highly motivated and experience UK team that has the support of a Global business.

THE ENVIRONMENTWe actively and consistently strive to reduce our impact on the environment and operate an environmental management system accredited to ISO 14001:2004


Philmac are a provider of pipe connection solutions in the Plumbing, Utility, Industrial, Agricultural and irrigation sectors. We are focused on providing high integrity and solution solving products of the highest quality combined with the highest levels of service.

PLUMBING - Professional plumbers have embraced Philmac’s products for their reliability and ease of installation and use. A major benefit is their ability to offer plumbers quick and simple solutions to their on-the-job needs.

Philmac products are designed and manufactured to ensure a lifetime of durability and service.

INDUSTRIAL - Philmac offers an extensive range of products to suit commercial and industrial applications. An increasing preference for plastic pipe systems in industrial environments has seen Philmac fittings and valves become the product of choice in this sector.

The durability, flexibility and non-corrosive qualities make them ideal for installation wherever polyethylene pipe is used to transfer liquid or air. Philmac products are also easily dismantled and reassembled if plants need to be reconfigured or moved.

UTILITY - Reliability and ease of use during installation have ensured Philmac fittings are readily used by municipal water and gas installation specialists. The installation of new and the repair of existing PE pipework can be done quickly and easily using Philmac fittings, even in difficult conditions, including inclement weather and confined spaces. There is also no need for electrical power or special tooling.

AGRICULTURE - Philmac products designed to provide flexibility, adaptability and durability to meet the diverse requirements of the agricultural sector. Long-lasting, simple installation and easy disassembly make the fittings ideal for livestock watering and rural water supplies.

IRRIGATION - Irrigation and turf specialists can access a wide range of quality products from Philmac, designed specifically

to meet the diverse needs of the industry. Philmac products are designed and made in Australia to meet the harsh climate conditions and enable irrigators to distribute water where it is required, with no wastage or evaporation and very little maintenance.


Introduction 2

3G METRIC/IMPERIALTM 5Introduction 6 - 7 Fittings Range 8 - 11Saddles 11Poly x Copper/PEX push fit (above ground) 11Liners and Connection kits 123G Metric/Imperial Installation Instructions 13Reducing kit installation instructions 14Installation Instructions – Metric Imperial™ Normal Gauge 15PE to Copper Installation Instructions 16PVC & ABS Connection kit installation instructions 17Pipe Standards 18

UTC 19UNIVERSAL TRANSITION COUPLINGSIntroduction 20 - 21UTC Counter Display Box 22Principles of Operation 23Fittings Range 24Installation Instructions 25UTC Guide 25

LARGE BORE METRIC 26Introduction 26Installation Instructions 26Fittings Range 27

VALVES 28Introduction 28 – 29Valve Range 30 – 31M.I. Connectors suitable for our valves 31

BSP THREADED FITTINGS 32Introduction 32 – 33Fittings range 34 – 35

SUNDRIES 36PROPERTIES - Chemical Resistance Chart 37

CONTACT DETAILS 38Customer ServiceArea Sales Managers

Terms & Conditions 39

CONTENTS


3G METRIC/IMPERIAL COMPRESSION FITTINGS

Patent protected the Metric/ImperialTM plastic compression fitting is the product of the company’s unrelenting commitment to continuous improvement and a culture based on innovation and ingenuity.

Seven into ONE will goConnects

Blue MDPE BS 6572Black MDPE BS 6730

Low Density Class C BS 1972Low Density Class D BS 1972High Density Class C BS 3284High Density Class D BS 3284

IRS 135 Heavy Gauge BS 1972/61

No need for inserts or dedicated fittings.Liners must be used with metric pipe sizes 20, 25, 32, 50 & 63mm No pipe preparation is needed and no force is required to push the pipe past the seal, so installation could not be faster or easier. Simply insert the pipe fully into the fitting and then tighten the nut. Assembly is so easy that you can even do it under live conditions. No special tools are required and there is no need to disassemble the fitting before use because the Metric/ImperialTM compression fitting is supplied pre-assembled and ready to use.

MATERIALS & COMPONENTS

THE COMPLETE SOLUTION

METRIC/IMPERIAL™ TECHNICAL MANUAL 11

FULLY OPEN

FULLY CLOSED

Fitting is pre-assembled ready to use in the open position with 2 threads showing.

PRINCIPALS OF OPERATION

Clearance between the pipe and fitting allows for easy insertion of the pipe.

Seal, which is in relaxed position.

Split collet, which is in relaxed position.

The pipe sits against the tapered wedges which minimises pipe rotation.

Positive internal stop when nut meets flange of the body.

Split collet bites into the pipe providing end load resistance.

Nut and then split collet has fully compressed the seal. Seal ring compression is achieved by exploiting the mechanical advantage of the nut thread.

MATERIALS & COMPONENTS

NUT – Acetal

BODY – Polypropylene

SPLIT COLLET – Acetal

SEAL – Nitrile Rubber

3G Met Imp master V2.indd 11 18/12/2008 10:13:15 PM


3G® METRIC/IMPERIAL COMPRESSION FITTINGS

Fast and Easy InstallationSlide & TightenTM technology: 3G® compression fittings incorporate all the benefits of Philmac’s unique Slide & TightenTM technology. No pipe preparation is needed, no force is required to push the pipe past the seal. This means faster and easier installation because the fitting seals on the outside of the pipe. Simply insert the pipe into the fitting until the first point of resistance is felt, and then tighten the nut.

Compact design: The size of the Philmac 3G® compression fitting has been kept to a minimum, making the fitting ideal for use in confined areas.

Easy disassembly: The fitting has been designed so the grip ring is released as soon as the nut is backed off, making disassembly easy.

Complete SecurityVisual stop: With Metric Pipe, the body flange on the 3G® compression fitting acts as a visual stop to indicate when the nut is tightened. There is no benefit in further tightening of the nut.

No loose conponents: If the nut is removed there is no danger of losing components, as the grip ring and seal ring are retained in the body of the fitting.

Dynamic sealing method: As the nut is tightened, the seal is compressed between the pipe and the fitting body.

Designed to minimize pipe twist: The fitting has been designed to minimize pipe twist as the nut is tightened. Maximum pipe twist is approximately a quarter turn compared with one and a half turns with many other fittings.

Approvals: Philmac 3G® compression fittings are WRAS approved for potable water use.

THE COMPLETE SOLUTION

Long-lasting, corrosion resistance and easy to install, Philmac fittings have proven themselves in irrigation and commercial applications all over the world. They are the fitting choice for both contractors and installers.

Lead FreeThe Philmac range of 3G® compression fittings is completely free of lead.


High Performance MaterialsManufactured from Engineered Materials: 3G® compression fittings are manufactured from lightweight high performance thermoplastic materials that, unlike metal fittings, resist corrosion, significantly minimizing maintenance, repairs and long-term costs. The materials are non-toxic and taint-free.

Complete CoverageWide range: The 3G® compression fittings range is comprehensive: straight and reducing couplers, tees, elbows, male and female adapters and caps ranging from ½” to 2”.

Cut the pipe square, there is no need to chamfer or lubricate

Ensure 2 threads are showing and simply slide the pipe in until the point of first resistance is felt

Tighten the nut by hand then with a wrench. For metric pipe, tighten to the point where the nutis touching the flange on the body of the fitting. DO NOT TIGHTEN BEYOND THIS POINT.

1 2 3



20mm/½”25mm/¾”32mm/1”40mm/1¼”50mm/1½”63mm/2”

20mm/½”25mm/¾”32mm/1”40mm/1¼”50mm/1½”63mm/2”

25mm/¾” x 20mm/½”32mm/1” x 20mm/½”32mm/1” x 25mm/¾”40mm/1¼” x 25mm/¾”40mm/1¼” x 32mm/1”50mm/1½” x 25mm/¾”50mm/1½” x 32mm/1”50mm/1½” x 40mm/1¼”63mm/2” x 32mm/1”63mm/2” x 40mm/1¼”63mm/2” x 50mm/1½”

20mm/½” x ½” BSP20mm/½” x ¾” BSP20mm/½” x 1” BSP25mm/¾” x ½” BSP25mm/¾” x ¾” BSP25mm/¾” x 1” BSP32mm/1” x ¾” BSP32mm/1” x 1” BSP32mm/1” x 1¼” BSP32mm/1” x 1½” BSP40mm/1¼” x 1” BSP40mm/1¼” x 1¼” BSP40mm/1¼” x 1½” BSP40mm/1¼” x 2” BSP50mm/1½” x 1½” BSP50mm/1½” x 2” BSP63mm/2” x 1½” BSP63mm/2” x 2” BSP

20mm/½” x ½” BSP20mm/½” x ¾” BSP20mm/½” x 1” BSP25mm/¾” x ½” BSP25mm/¾” x ¾” BSP25mm/¾” x 1” BSP32mm/1” x ¾” BSP32mm/1” x 1” BSP32mm/1” x 1¼” BSP40mm/1¼” x 1¼” BSP40mm/1¼” x 1½” BSP50mm/1½” x 1½” BSP50mm/1½” x 2” BSP63mm/2” x 2” BSP

£4.36 £4.59

£10.89 £23.97 £25.04 £37.69

£6.28 £7.03

£14.49 £26.42 £33.49 £50.42

£8.98 £14.49 £14.49 £27.31 £27.31 £40.16 £40.16 £41.75 £53.99 £56.05 £56.05

£3.94 £4.78 £7.57 £5.15 £5.01 £8.01 £7.29 £7.29

£15.25 £15.25 £17.16 £17.16 £19.09 £21.81 £18.64 £21.44 £26.25 £26.25

£5.34 £5.60 £7.40 £5.90 £5.76 £6.85 £6.85 £6.90

£20.29 £20.19 £21.28 £21.87 £30.66 £30.66

10105111

111111

105511111111

101010101010555511111111

10101010101055511111

912291339144915591669177

901229013390144901559016690177

91329142914391539154916391649165917491759176

922192229223923192329233924292439244924592539254925592569265926692759276

98219822982398319832983398429843984498549855986598669876

METRIC/IMPERIALJOINERPOL X POL

METRIC/IMPERIALSLIP JOINERPOL X POL

METRIC/IMPERIALREDUCING JOINERPOL X POL

METRIC/IMPERIALEND CONNECTORPOL X M.I. BSP

METRIC/IMPERIALEND CONNECTOR POL X F.I. BSP

SIZES PRICEEACH £PACKSPart No.DESCRIPTION

Liners to suit MDPE pipe are required for WRAS requirements, please see page 12 for these items

No internal pipe stop, ideal flexibility for repair or retrofit



20mm/½”25mm/¾”32mm/1”40mm/1¼”50mm/1½”63mm/2”

20mm/½”25mm/¾”32mm/1”50mm/1½”63mm/2”

25mm/¾” x 25mm/¾” x 20mm/½”25mm/¾” x 25mm/¾” x 32mm/1”32mm/1” x 32mm/1” x 25mm/¾”50mm/1½” x 50mm/1½” x 25mm/¾”50mm/1½” x 50mm/1½” x 32mm/1”50mm/1½” x 50mm/1½” x 40mm/1¼”63mm/2” x 63mm/2” x 25mm/¾”63mm/2” x 63mm/2” x 32mm/1”63mm/2” x 63mm/2” x 50mm/1½”

25mm/¾” x ½” BSP25mm/¾” x ¾” BSP

20mm/½” x ½” BSP20mm/½” x ¾” BSP25mm/¾” x ½” BSP25mm/¾” x ¾” BSP25mm/¾” x 1” BSP32mm/1” x ½” BSP32mm/1” x ¾” BSP32mm/1” x 1” BSP32mm/1” x 1¼” BSP40mm/1¼” x 1¼” BSP40mm/1¼” x 1½” BSP50mm/1½” x ½” BSP50mm/1½” x ¾” BSP50mm/1½” x 1½” BSP50mm/1½” x 2” BSP63mm/2” x 2” BSP

20mm/½”25mm/¾”32mm/1”40mm/1¼”50mm/1½”63mm/2”

25mm/¾” x 20mm/½”

£7.83 £12.25 £15.34 £36.58 £35.80 £55.45

£11.25 £16.90 £20.89 £46.48 £71.29

£12.59 £18.41 £18.41 £44.98 £44.98 £37.98 £56.76 £56.76 £55.45

£9.82

£11.87

£7.59 £11.49 £12.10 £12.10 £14.62 £14.71 £14.71 £14.71 £29.63 £29.48 £33.11 £33.90 £33.90 £33.90 £44.02 £47.59

£5.82 £8.60

£12.53 £26.83 £29.10 £39.56

£8.60

1055111

11111

555111111

55

101055555551111111

10105111

10

932293339344935593669377

9032290333903449036690377

933293349343936393649365937393749376

99319932

9421942294319432943394419442944394449454945594619462946594669476

952295339544955595669577

9532

METRIC/IMPERIALTEE - EqualPOL X POL

METRIC/IMPERIALSLIP TEEPOL X POL

METRIC/IMPERIALTEE - UnequalPOL X POL

METRIC/IMPERIALTEE POL X M.I. BSP

METRIC/IMPERIALTEE POL X F.I. BSP

METRIC/IMPERIALELBOWPOL X POL

METRIC/IMPERIAL REDUCING ELBOWPOL X POL



No internal pipe stop, ideal flexibility for repair or retrofit



20mm/½” x ½” BSP20mm/½” x ¾” BSP25mm/¾” x ½” BSP25mm/¾” x ¾” BSP25mm/¾” x 1” BSP32mm/1” x 1” BSP32mm/1” x 1¼” BSP40mm/1¼” x 1¼” BSP40mm/1¼” x 1½” BSP50mm/1½” x 1½” BSP50mm/1½” x 2” BSP63mm/2” x 2” BSP

20mm/½” x ½” BSP25mm/¾” x ¾” BSP32mm/1” x 1” BSP

25mm/¾” x ¾” BSP32mm/1” x 1” BSPOther tank connector optionsavailable on page 35

20mm/½”25mm/¾”32mm/1”40mm/1¼”50mm/1½”63mm/2”

20mm/½” x ½” BSP25mm/¾” x ½” BSP25mm/¾” x ¾” BSP

20mm/½” x ½” BSP25mm/¾” x ¾” BSP

DZR ½” c/w double check valveDZR ¾” c/w double check valve

½” BSP¾” BSP1” BSP *Water: -20°CFor Artic Resistance Ball Valves, see page 30

½”

¾” (to suit 8022 only)

£5.28 £6.68 £7.39 £7.20

£10.73 £10.78 £23.80 £23.67 £25.80 £25.60 £33.47 £33.58

£5.28 £7.39

£12.52

£11.11 £13.38

£4.74 £6.36 £8.49

£16.78 £20.52 £29.06

£10.80 £12.63 £13.81

£23.87 £29.59

£18.65

£28.08

£15.25 £21.38 £41.08

£1.60

£1.84

10101010105511111

10105

105

10105111

555

55

1

1

111

1

1

962196229631963296339643964496549655966596669676

972197329743

97809781

902990399049905990699079

902290319032

92289229

3022

3033

802180228023

HOSCON 21

HOSCON 22

METRIC/IMPERIALELBOW POL X F.I. BSP

METRIC/IMPERIALELBOW POL X M.I. BSP

METRIC/IMPERIALTANK CONNECTORASSEMBLYc/w Seal Washers

METRIC/IMPERIALEND CAP

METRIC/IMPERIALWALL PLATE ELBOW PLASTIC

METRIC/IMPERIALWALL PLATEELBOW METAL

HOSE UNION BIB TAP BS2682 CV

ARCTIC ICE RESISTANT BIB TAP

HOSE UNION TAPCONNECTOR





PE x Copper/PEX Push Fit (above ground) TWO PART ASSEMBLED TO CORRECT TORQUE. DO NOT TIGHTEN FURTHER.


50mm x 25mm/¾”63mm x 25mm/¾”

50mm/1½” x 2”63mm/2” x 2”

20mm/½” x 15mm25mm/¾” x 15mm25mm/¾” x 22mm32mm/1” x 22mm32mm/1” x 28mm

20mm/½” x 15mm25mm/¾” x 15mm25mm/¾” x 22mm32mm/ 1” x 28mm

20mm/½”25mm/¾”32mm/1”

25mm/¾” x ½” 25mm/¾” x ¾” 32mm/1” x ¾” 32mm/1” x 1”

BODY SIZE20mm/½”(16mm Nominal Bore)25mm/¾”(16mm Nominal Bore)25mm/¾”(19.5mm Nominal Bore)32mm/1” (19.5mm Nominal Bore)

£25.02 £25.76

£103.51 £103.51

£9.63 £11.75 £11.75 £16.19 £17.65

£9.63 £11.75 £11.75 £19.97

£25.13 £37.15 £56.71

£35.92 £35.92 £54.84 £54.84

£33.40 £34.89 £42.15 £45.88

11

11

11111

1111

552

5522

1111

9063590735

8776687776

13211331133213421343

1521153115322543

282228332844

28312832 28422843

95272953729527395373

METRIC SADDLE

FLANGE ADAPTORFlange to BS 4504

JOINER

ELBOW

METRIC/IMPERIALSTOPCOCKPOL X POL

METRIC/IMPERIALSTOPCOCKPOL x FI

METRIC/IMPERIAL¼ Turn BALL VALVE POL X POL

Stopcock

Ball Valve

FOR CONNECTIONS TO PEX PIPE PLEASE REFER TO PIPE MANUFACTURERS INSTALLATIONINSTRUCTIONS AND ONLY USE PEX LINERS COMPATIBLE WITH THE PIPE BEING USED



3G METRIC/IMPERIAL LINERS & CONNECTION KITS

20mm25mm32mm50mm63mm

20mm/½”25mm/¾”32mm/1”40mm/1¼”50mm/1½”63mm/2”

25mm/¾” x 20mm/½”32mm/1” x 20mm/½”32mm/1” x 25mm/¾”50mm/1½” x 25mm/¾”50mm/1½” x 32mm/1”63mm/2” x 25mm/¾”63mm/2” x 32mm/1”63mm/2” x 50mm/1½”

½”*¾”1”1¼”1½”2”*fits ” LD and HD

¾” x ½”1” x ½”1 x ¾”

20mm/½” x 15mm25mm/¾” x 22mm32mm/1” x 28mm25mm/¾” x 15mmSuitable for single use onlyNot suitable for PB or PEX pipe

20mm/½”25mm/¾”32mm/1”40mm/1¼”50mm/1½”63mm/2”

20mm25mm32mm40mm50mm63mm

½” (20mm/½” body)¾” (25mm/¾” body)1” (32mm/1” body)1¼” (40mm/1¼” body)1½” (50mm/1½” body)*2” (63mm/2” body)*

£0.33 £0.36 £0.60 £1.18 £1.45

£1.14 £1.26 £1.83 £2.35 £4.11 £5.49

£3.04 £4.34 £4.34 £9.01 £9.01

£13.57 £13.57 £13.57

£1.04 £1.25 £1.50 £3.23 £4.00 £6.08

£3.99 £5.52 £4.74

£4.73 £4.99 £7.07 £4.89

£1.56 £2.14 £2.29 £3.74 £4.23 £7.09

£3.43 £3.54 £3.65 £6.43 £8.27

£10.30

£3.43 £3.54 £3.65 £6.43

£16.23 £20.34

100100502520

202010555

10101055555

101010555

101010

10101010

10105555

101010111

101010111

7800278003780047800678007

999002999003999004999005999006999007

9803298042980439806398064980739807498076

930029300393004930059300693007

931329314293143

86002860038600486032

912891389148915891689178

942029420394204942059420694207

94402944039440494405

944061944071

MDPE LINERSEN12201/BS 6572 (below ground)EN12201/BS 6730(above ground)

METRIC/IMPERIALCONNECTION KIT

METRIC/IMPERIALREDUCING SETSBS 6572/6730 MetricBS 1972/3284 & IRS 135-Imperial

METRIC/IMPERIALNORMAL GAUGECONNECTION KITBS 1972 IRS 134

METRIC/IMPERIALNORMAL GAUGEREDUCING SETS

METRIC/IMPERIAL COPPER CONNECTION KIT BS EN 1057Connection Kit for copper pipe for above and below ground use

METRIC/IMPERIALBLANKING PLUG

METRIC PVC/ABSCONNECTION KIT

IMPERIAL PVC/ABS CONNECTION KIT*Complete with nut and seal



3G METRIC/IMPERIAL - INSTALLATION INSTRUCTIONS

1. Cut the pipe squareNo need to prepare pipe end. Chamfering or lubrication is not required.

1

6. Nut tighteningTighten the nut by hand and then firmly with a wrench.

6

5. Pipe insertionSlide the pipe fully into the fitting to the point where the stop is felt

5

2. Insert liner in MDPE pipeWith MDPE pipe a liner must be used to ensure conformance with WRAS.

2

7. Fully installedFitting is now fully installed.

7

3. No liner or insert required for imperial pipe For IRS 134 use connection kit.

3

8. Imperial fully installedFor connections to Imperial PE pipe (BS1972/3284 and IRS 135 Heavy Gauge) steps 5 and 6 instructions are the same as for MDPE connections.

8

4. Ready to use positionThe fitting is pre-assembled and ready to use. Always ensure the nut is fully relaxed and 2 threads are showing before inserting the pipe.

4

9. DisassemblySimply loosen the nut until 2 threads are showing. Pipe will be released and can simply be pulled out of the fitting.

9

3G METRIC/IMPERIAL INSTALLATION INSTRUCTIONS


INSTALLATION INSTRUCTIONS

REDUCING KIT INSTALLATION INSTRUCTIONS

Two styles – one for small size reductions (left) and for large size reductions (right)

Pipe is installed as per pipe installation instructions8 METRIC/IMPERIAL™ TECHNICAL MANUAL

1. Disassembly

remove the nut. Retain this Metric-Imperial nut for

reinstalation later

2. Disassembly The white split collet and seal ring

must then be removed. These areno longer required.

3a Install Reducing Kit Small diameter change kit is illustrated Take the appropriate connection kit

with the tapered end pointing outward.

4a Install Nut Reinstall the Metric-Imperial Nut

Wind the nut onto body, leaving two threads visible

Pipe is installed as per pipe installation

instructions

3b Install the Reducing Kit Large diameter change kit is illustrated Take the appropriate connection kit

per the image above.



4b Install Nut Reinstall the Metric-Imperial Nut



instructions


1

1 DisassemblyTake the Metric/ImperialMT

fitting and remove the nut. Retain this Metric-Imperial nut for reinstalation later.

8 METRIC/IMPERIAL™ TECHNICAL MANUAL

1. Disassembly


reinstalation later








instructions








instructions


4a

4a Install NutReinstall the Metric-Imperial Nut. Wind the nut onto body, leaving two threads visible.Pipe is installed as per pipe installation instructions.


1. Disassembly


reinstalation later








instructions








instructions


3a

3a Install Reducing Kit Small diameter change kit is illustrated. Take the appropriate connection kit and place it in the body of the fitting with the tapered end pointing outward.


1. Disassembly


reinstalation later








instructions








instructions


2

2 Disassembly The white split collet and seal ring must then be removed. These are no longer required.


1. Disassembly


reinstalation later








instructions








instructions


3b

3b Install the Reducing Kit Large diameter change kit is illustrated. Take the appropriate connection kit and place it in the body of the fitting as per the image above..


1. Disassembly


reinstalation later








instructions








instructions


4b

4b Install NutReinstall the Metric-Imperial Nut. Wind the nut onto body, leaving two threads visible.Pipe is installed as per pipe installation instructions.


INSTALLATION INSTRUCTIONS METRIC/IMPERIALTM NORMAL GUAGE

NORMAL GUAGE INSTALLATION INSTRUCTIONS

93002 93003 93004 93005 93006 93007

½”* ¾” 1” 1-1¼” 1-1½” 2”

1 part 2 part 3 part 4 part 4 part 2 part

Seal & Collect

Seal, Collect and cap

Bodyliner, seal, collect

and cap

Bodyliner, seal, collect

and cap

Seal & Collect

1. Remove nut and retain.

5. Fit collet into body of fitting. For 1/2”, 1”, 1-1/4”. and 1-1/2” fit cap on the collet.

2. Remove collet.This is no longer required.

6. Replace nut.Leave two threads showing.

4. Insert NG seal. Marked with red dot for identification.

8. Tighten by hand and then firmly with a wrench.

* can also be used on 3/8” Low and High Density pipeOther sizes ½” Insert one piece adaptor with cap facing out. - 1” seal first followed by collet and cap.1-¼” & 1-½” Body liner first followed by seal, collet and cap.

1

5

2

6

3. Remove seal.This is no longer required.

3

7. Insert pipe. Insert the pipe into the fitting to where the stop is felt.

7

4

8


INSTALLATION INSTRUCTIONS 3G METRIC/IMPERIAL

1 Disassembly Remove the 3G nut (and keep for reinstallation later), remove the White 3G Collet and the black rubber seal.

4 Assembly Install the 3G Metric®/Imperial Nut.

3 Assembly Orientate the stainless steel gripper and plastic backing ring.

3G PE to copper connections incorporates all the benefits of the innovative 3G Metric/Imperial™ range, including the patented Slide & Tighten™ technology. Installation is easier and faster.

1 2

2 Assemby Check all components are available. Insert the seal into the body, ensuring orientation is correct.

3 4

5 Pipe Installation Cut copper pipe square. Mark the depth of copper insertion using ‘pipe stop’ marking or body flange as visual indicator. Remove any scale or burrs from the copper pipe.

7 Pipe Installation Tighten the nut by hand and finish using a wrench. Remember to check that the nut is tight against the body flange.

8 Pipe Installation Remember to replace the stainless steel grip ring if re-using the copper connection.

5 6

6 Pipe InstallationInsert the copper pipe and push into the rubber seal up to the mark indicated.

7 8

PE TO COPPER INSTALLATION INSTRUCTIONS 3G® METRIC/IMPERIAL™


METRIC AND IMPERIAL KITS - EXCLUDING 1½” & 2”

PVC/ABS KIT - INSTALLATION INSTRUCTIONS

IMPERIAL KITS 1½” & 2”

1 DissasembleTake the fitting and remove the nut.The white split collet must then be removed and discarded. Ensure the seal remains in the body of the fitting.

1 DissasembleTake the fitting and remove the nut,collet and seal and discard.

1 Cut the pipe squareCut the pipe square and remove any burrs.

5 Pipe instertionInsert the pipe fully into the fitting upto the witness mark.

2 Position the new colletTake the PVC/ABS collet and place it in the body of the fitting with tapered end pointing outwards.

2 Position the new seal and colletTake the PVC/ABS collet kit and place the seal it in the body of the fitting followed by the collet with the tapered end pointing outward.

2 Ready to use positionPrior to pipe insertion ensure the nut is fully relaxed with three threads showing.

5 Nut tighteningThe nut should be tightened by hand.

6 Nut tighteningThe nut should then be tightened with a wrench.

3 Ready to useReplace the nut on the fitting body which is now ready to use. Connection kit installation instructions now apply.

3 Ready to useReplace the nut on the fitting body which is now ready to use. Connection kit installation instructions now apply.

3 Witness mark the pipeTo ensure the correct insertion depth, witness a mark by lining up the pipe against the fitting using the flange of the body as an indicator.

1

1

4

2

2

5

3

3

6

PVC & ABS CONNECTION KIT INSTALLATION INSTRUCTIONS


MDPE TO WATER INDUSTRY STANDARD EN 12201, BS 6572 & BS 6730

OUTSIDE DIAMETER WALL THICKNESS

NOMINAL SIZE MIN MAX MIN MAX

MM MM MM MM MM

½ 20 20.3 2.3 2.6

¾ 25 25.3 2.3 2.6

1 32 32.3 3.0 3.4

1½ 50 50.3 4.6 5.2

2 63 63.3 5.8 6.5

CLASS C LOW DENSITY (TYPE 32) POLYETHYLENE PIPES TO BS1972/67



INCH MM MM MM MM

17 17.3 2.2 2.5

½ 21.2 21.5 2.7 3

¾ 26.6 26.9 3.4 3.7

1 33.4 33.7 4.2 4.6

1¼ 42.1 42.5 5.3 5.8

1½ 48.1 48.5 6.1 6.7

2 60.1 60.6 7.6 8.4

3 88.6 89.3 11.2 12.3

CLASS C HIGH DENSITY (TYPE 50) POLYETHYLENE PIPES TO BS3284/67



INCH MM MM MM MM

½ 21.2 21.5 1.8 2.0

¾ 26.6 26.9 2.3 2.6

1 33.4 33.7 2.8 3.1

1¼ 42.1 42.5 3.6 4.0

1½ 48.1 48.5 4.1 4.5

2 60.1 60.6 5.1 5.6

3 88.6 89.3 7.5 8.2

4 113.9 114.7 9.6 10.6

CLASS D HIGH DENSITY (TYPE 50) POLYETHYLENE PIPES TO BS3284/67



INCH MM MM MM MM

17 17.3 1.9 2.1

½ 21.2 21.5 2.3 2.6

¾ 26.6 26.9 2.9 3.2

1 33.4 33.7 3.7 4.1

1¼ 42.1 42.5 4.6 5.1

1½ 48.1 48.5 5.3 5.8

2 60.1 60.6 6.6 7.3

3 88.6 89.3 9.7 10.7

CLASS D LOW DENSITY (TYPE 32) POLYETHYLENE PIPES TO BS1972/67



INCH MM MM MM MM

17 17.3 2.8 3.1

½ 21.2 21.5 3.4 3.7

¾ 26.6 26.9 4.3 4.7

1 33.4 33.7 5.4 5.9

1¼ 42.1 42.5 6.8 7.5

1½ 48.1 48.5 7.8 8.6

NORMAL GAUGE BS1972/61 IRS 134



INCH MM MM MM MM

½ 16.95 17.30 2.30 2.60

¾ 24.95 25.40 3.10 3.50

1 31.25 31.75 3.10 3.50

1¼ 37.50 38.10 3.10 3.50

1½ 43.80 44.45 3.50 3.90

2 60.00 60.85 4.65 5.20

HEAVY GAUGE BS1972/61 IRS 135



INCH MM MM MM MM

½ 20.70 21.10 4.30 4.85

¾ 27.05 27.45 4.30 4.85

1 33.85 34.10 4.30 4.85

1¼ 42.00 42.65 5.05 5.60

1½ 47.95 48.65 5.35 5.90

PIPE STANDARDSv


v

The problem solver.

UTC – Universal Transition CouplingThe UTC® is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.

Designed especially for connecting pipes that are made from a variety of different materials, such as polyethylene, galvanized iron, PVC, copper, ABS, lead and stainless steel.

The Philmac UTC® is constructed with a wide outside diameter tolerance, and is designed to accommodate a range of different diameters on most pipe material within the one fitting.

In addition to winning an Australian Design Award for innovation in product development, the UTC® has been embraced by water utilities right around the world, including Australia, the UK, Europe and North America.


UNIVERSAL TRANSITION COUPLINGS

THE PROBLEM SOLVERFast and Easy InstallationSlide & TightenTM The Philmac UTC® incorporates all the benefits of Philmac’s Slide & Tighten™ technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC® is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC® is supplied ready to use.*Pipes at the top end of the fitting tolerance may incur minimum resistance..

Easy disassembly: The design of the UTC® means that once the nut is backed off, the pipe can easilybe removed from the fitting.

Complete SecurityVisual stop: The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.

No loose conponents: The Philmac UTC® is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.

Dielectric (insulating) fitting: UTC® fittings are insulating andare a dielectric fitting for use between dis-similar metals.

End load resistant: UTC® fittings are fully end load resistant and do not require the use of thrust blocks.

Approvals: Philmac UTC® fittings are WRAS approved for potable water use.


High Performance MaterialsManufactured from Advanced Thermoplastic Engineered Materials: The Philmac UTC® is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC® end contains hard stainless steel grippers which provide superior end load resistance.

The Philmac UTC® is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.

Complete CoverageWide range: The Philmac UTC® range is comprehensive: Straightand reducing couplers, elbows and male adaptors, in both transition (PE to UTC®) and double ended versions (UTC® to UTC®) ranging from 15 mm to 61 mm)

UNIVERSAL TRANSITION COUPLING TECHNICAL MANUAL 3

FAMILY OF FITTINGS - A COMPREHENSIVE RANGE

Repair work UTC® is used extensively by water companies, plumbers and civil contractors for repair work. The UTC® x UTC®

fitting was originally developed as a copper to copper repair joint at the request of a global water company.

New installations Connecting polyethylene pipe to water meter risers and polyethylene pipe to copper.

UTC® fittings are used by water companies as a connection between polyethylene pipe and metal pipes.

Upgrades UTC® is particularly useful in service line upgrades. A small number of PE x UTC® fitting provide a complete

solution and will connect to whatever pipe the installer finds at the property boundary.

A UTC® x Threaded Tee provides a solution when tieing an irrigation system into an existing water service line.

APPLICATIONS

PVC

Copper

Stainless Steel

ABS

Galvanised Iron

Lead

PVC

Copper

Stainless Steel

ABS

Galvanised Iron

Lead

PVC

Copper

Stainless Steel

ABS

Galvanised Iron

Lead

PE IMPERIAL

PE METRIC

PE x UTC UTC x UTC

MaleAdaptor

xUTC

Tee

UTC

FI Tee

UTC

Coupler

UTCx

UTC

ReducingCoupler

UTCx

UTC

Connects PE to a wide variety of pipes

Connects a wide variety of pipes together

Coupler3G Metric/

ImperialPEx

UTC

COMPLETE RANGE

Elbow

UTC

PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polyethylene and PEX

PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polyethylene and PEX

Tee3G Metric/

ImperialPEx

UTC

UTC_tech manual_METRIC-IMPERIAL.indd 3 18/12/2008 6:23:48 AM

CONNECTS PE TO A WIDE VARIETY OF PIPESPVC, copper, galvanised iron, ABS, lead, stainless steel,

steel, polyethylene and PEX

CONNECTS A WIDE VARIETY OF PIPES TOGETHERPVC, copper, galvanised iron, ABS, lead, stainless steel,

steel, polyethylene and PEX



UTC COUNTER DISPLAY BOX


NB:- For the PE 3G end, a liner is required for PE pipe

FULLY CLOSED – 3G™ PE END FULLY CLOSED – UTC® END

The nut is tightened with a wrench firmly to ensure proper installation. Some threads may be exposed, depending on the size of pipe inserted into the fitting.

Seal ring compression is achieved by exploiting the mechanical advantage of the thread.

Split ring with the stainless grippers bites into the pipe providing end load resistance

Positive internal stop when nut meets flange of the body.

Split collet bites into the pipe providing end load resistance.

Nut and then split collet has fully compressed the seal. Seal ring compression is achieved by exploiting the mechanical advantage of the nut thread.

FULLY OPEN – 3G™ PE END FULLY OPEN – UTC® END

Fitting is pre-assembled in the ready to use position with 3 threads showing

Clearance between the pipe and fitting allows for easy insertion of the pipe

Seal – is in a relaxed position

Split ring – is in a relaxed position

Pipe is inserted up to the flange on the fitting

Fitting is pre-assembled ready to use in the open position with 2 threads showing.

Clearance between the pipe and fitting allows for easy insertion of the pipe.

Seal, which is in relaxed position.

Split collet, which is in relaxed position.

The pipe sits against the tapered wedges which minimises pipe rotation.

PRINCIPALS OF OPERATION – COMPRESSION FITTINGS


15-21mm x 20mm/½”15-21mm x 25mm/¾”21-27mm x 20mm/½”21-27mm x 25mm/¾”27-34mm x 20mm/½”27-34mm x 25mm/¾”27-34mm x 32mm/1”27-34mm x 40mm/1¼”34-39mm x 32mm/1”34-39mm x 40mm/1¼”39-43mm x 32mm/1”39-43mm x 40mm/1¼”47-49mm x 50mm/1½”47-49mm x 63mm/2”59-61mm x 63mm/2”

15-21mm x 25mm/¾”21-27mm x 25mm/¾”21-27mm x 32mm/1”27-34mm x 25mm/¾”27-34mm x 32mm/1”

15-21mm x15-21mm21-27mm x 21-27mm27-34mm x 27-34mm34-39mm x 34-39mm39-43mm x 39-43mm47-49mm x 47-49mm59-61mm x 59-61mm

21-27mm x 15-21mm27-34mm x 21-27mm27-34mm x 15-21mm39-43mm x 27-34mm

15-21mm x ½” BSP15-21mm x ¾” BSP15-21mm x 1” BSP21-27mm x ¾” BSP21-27mm x 1” BSP21-27mm x 1¼” BSP27-34mm x ¾” BSP27-34mm x 1” BSP27-34mm x 1¼” BSP27-34mm x 1½” BSP

15-34mm34-43mm43-63mm

£18.04 £18.04 £18.04 £18.04 £21.43 £21.43 £24.86 £24.86 £25.60 £25.60 £28.63 £28.63 £32.64 £32.64 £38.84

£18.04 £18.04 £21.43 £21.43 £21.43

£18.04 £18.04 £21.43 £28.63 £28.63 £32.64 £38.84

£18.04 £21.43 £21.43 £28.63

£12.70 £12.70 £12.70 £12.70 £12.70 £12.70 £16.08 £16.08 £16.08 £16.08

P.O.A. P.O.A. P.O.A.

111111111111111

11111

1111111

1111

1111111111

111

103210331042104310521053105410551074107510641065108610871097

15331543154415531653

1133114411551177116611881199

1143115411531165

1231123212331242124312441252125312541255

113511361137

UNIVERSALTRANSITIONJOINERUTC X POLc/w Metric MDPE Liner

UNIVERSALTRANSITIONELBOWUTC X POLc/w Metric MDPE Liner

UNIVERSAL TRANSITIONDOUBLE ENDEDREPAIR JOINER

UNIVERSAL TRANSITIONREDUCED REPAIRJOINER

UNIVERSALTRANSITIONM.I. END CONNECTORUTC X M.I. BSP

PIPE GAUGE*for use withUniversal Transition Coupling

*Please contact customer service or your local area sales manager for this item




INSTALLATION INSTRUCTIONS :: UNIVERSAL TRANSITION COUPLINGS

1. Cut pipe to lengthCut pipe square and to length using flange on the central body as a guide. Ensure end of connecting pipe is undamaged and clean.

3. Pipe insertionTo ensure adequate insertion depth, witness mark the pipe to the flange on the fitting. Then insert pipe to the correct depth.

5. Fully installedThe fitting is fully installed when the nut cannot be tightened any further with reasonable force.

2. Ready to use positionThe fitting is pre-assembled and ready to use, however always ensure the nut is backed off and 3 threads are showing. Pipes at the top of the tolerance may require 5 threads showing.

4. Nut tighteningTighten nut firmly with a wrench. Nut will not butt against the body flange when the pipe size is at the top end of the fitting tolerance.

Fitting selection can be made easier with use of the Philmac Pipe Gauge CopperIf user does not want to use a UTC the copper needs to be M.I. or F.I. ended so that we can offer a Met/Imp fitting to suit. Same rule applies for 54mm O.D. copper. Use copper compression fitting to adapt to M.I. or F.I. and then use Met/Imp fitting.

LeadThe general condition of lead pipe can make sizing difficult at top and bottom tolerance. If the recommended UTC is not successful the next size, up or down, depending on fit should be offered.

6. DisassemblyUnscrew the nut with a wrench. Pipe will be released and can be pulled out of the fitting.

1 3

5

2

4 6

• USE A PIPE MEASURING GAUGE

IF THERE ARE DOUBTS ON PIPE OUTSIDE

DIAMETER (OD) SIZE.

• INSTALLATION INSTRUCTIONS ARE ALSO APPLICABLE AND AVAILABLE TO

THE MDPE/PE END.

GUIDE ONLY. ACTUAL SIZE DEPENDANT ON PIPE CONDITION.

UTC RANGE 15-21 21-27 27-34 34-39 39-43 47-49 59-61

Alkathene 3/8" 1/2" 3/4" 1" 1-¼" 1-½" 2"

Normal Gauge IRS 134 1/2" 3/4" 1" 1-¼"

Heavy Gauge IRS 135 1/2" 3/4" 1"

Copper 15MM 22MM 28MM 35MM 42MM

Galvanised Iron 3/8" 1/2" 3/4" 1" 1-¼" 1-½" 2"

Stainless Steel 3/8" 1/2" 3/4" 1" 1-¼" 1-½" 2"

Metric ABS/PVC 16MM & 20MM 25MM 32MM 40MM

Imperial ABS/PVC 3/8" 1/2" 3/4" 1" 1-¼" 1-½" 2"

Lead 3/8" 1/2" 3/4" 1-¼" 1" 1-½"

5LB (20MM OD) 6LB (21.6MM OD) 9LB (30.6MM OD) 7LB (37.6MM OD) 16LB (41MM OD) 12LB (48MM OD)

7LB (23.2MM OD) 11LB (32.8MM OD)

9LB (25.4MM OD)

1/2" 3/4" 1" 1-¼"

2LB (16MM OD) 4LB (25.2MM OD) 6LB (31MM OD) 9LB (39.2MM OD)

4LB (19.2MM OD)

5LB (26.4MM OD) 7LB (31.6MM OD)


Cut the pipe square, there is no need to chamfer or lubricate.

Ensure 3 threads are showing and simply slide the pipe in until the point of first resistance is felt

Tighten the nut by hand, and then with a wrench to the point where the nut is touching the flange on the body of the fitting. Do not tighten beyond this point.

1 2 3

Fast and Easy InstallationFast and easy Installation: no pipe preparation is required. Simply insert the pipe into the fitting until the first point of resistance is felt, and then tighten the nut.

Dynamic sealing method: the mechanical advantage of the nut is used to push the O-ring into the compressed position, eliminating the need to push past a seal when inserting the pipe.

No loose components: if the nut should be removed for any reason there is no danger of losing the O-ring, spacer or grip ring as they are retained in the nut Rated to 16 Bar – ensures the fittings meet the requirements of high pressure systems.

Lead-free: the fittings are made from materials that are lead free.

LARGE BORE PE METRIC FITTINGS


LARGE BORE PE METRIC FITTINGS 16 BAR RATED

75mm90mm110mm

75mm x 63mm90mm x 75mm110mm x 90mm

75mm x 2” BSP75mm x 3” BSP90mm x 3” BSP110mm x 4” BSP

75mm x 2” BSP90mm x 3” BSP110mm x 4” BSP

75mm90mm110mm


75mm90mm110mm


75mm90mm110mm

90mm x 3”110mm x 4”

£60.10 £73.65

£118.52

£59.27 £77.89

£114.51

£39.79 £42.34 £45.73 £76.89

£38.95 £45.73

£101.59

£85.70 £119.42 £237.20

£81.80 £93.25

£171.77

£94.88 £114.51 £194.67

£59.27 £59.27

£101.59

£40.89 £55.62 £65.44

£141.20 £176.91

111

111

1111

111

111

111

111

111

111

11

818881998100

818781988109

8286828882988209

888688988809

838883998300

848684988409

858885998500

868686988609

808980998009

7879878709

JOINERPOL X POL

REDUCING JOINERPOL X POL

END CONNECTORPOL X M.I. BSP

END CONNECTOR

TEE – EqualPOL X POL

TEEPOL X F.I. BSP

ELBOWPOL X POL

ELBOWPOL X F.I. BSP

END CAP

FLANGE ADAPTORFlange to BS 4504



VALVES

Fast and Easy InstallationThreaded or Compression Inlet/Outlet: The different options allow compatibility with existing installations and keeps installation time to a minimum.

Slide and TightenTM Technology*: Compression ends incorporate all the benefits of Philmac’s unique technology, which means no force is required to push the pipe past the seal. Simply insert the pipe fully into the fitting and tighten the nut.

Bi-directional flow: The Ball Valves have been designed to work in either direction to ensure easy installation and eliminate the need to look for identification marks.

Multi-position Installation: The valves can be installed in any orientation to assist with all types of installations.

Complete SecurityReliable Operation: High-quality injection moulded components and polypropylene ball means years of reliable operation.

Corrosion Resistant: With a plastic body and components, plus rubber O-rings and a stainless steel handle screw, the components used have a high degree of corrosion resistance.

Positive Open-Close: Rotate through 90o between fully open and fully closed to ensure there is no guesswork required as to weather it is open or closed.

Lead FreeThe Philmac range of Ball Valves is completely free from lead.

VALVES KEY ADVANTAGES

Long-lasting, corrosion resistance and easy to install, Philmac ball valves have proven themselves in irrigation and commercial applications. They are the fitting choice for both contractors and installers.


High Performance MaterialsManufactured from Engineered Materials: Philmac valves are manufactured from lightweight, high performance thermoplastic materials that have excellent impact, UV and corrosion resistance. The materials are non-toxic and taint free.

Complete Coverage• Pressure rated 14 bar• Can be installed above or below ground• Complete range Agriculture, Municipal,• Corrosion resistance, long life performance• Manufactured with thermoplastic materials U/V resistant qualities• ¼ Turn for visual on/off control

Apply PTFE tape or approved sealant to the male thread. Sufficient tape needs to be applied to ensure a watertight seal.

Screw on to a male or female thread by hand until firm.

Using a pipe wrench or multigrips on the end caps only, futher screw the ball valve tight. Where necessary, ensure the thread is held stationary to avoid it from moving. DO NOT use pipe wrench or multigrips on the body of the valve.

1 2 3


VALVES

20mm/½”25mm/¾”32mm/1”

25mm/¾” x ½” 25mm/¾” x ¾” 32mm/1” x ¾” 32mm/1” x 1”

20mm/½”25mm/¾”25mm/¾”32mm/1”

½”¾”1”

¾” F.I. x ¾” F.I.1” F.I. x 1” F.I.1¼” F.I. x 1¼” F.I.1½” F.I. x 1½” F.I.2” F.I. x 2” F.I.

¾” M.I. x ¾” M.I.1” M.I. x 1” M.I.

1” BSP

£25.13 £37.15 £56.71

£35.92 £35.92 £54.84 £54.84

£33.40 £34.89 £42.15 £45.88

£18.56 £22.36 £32.24

£27.92 £38.90 £50.52 £59.51 £76.21

£25.74 £33.20

£45.73

552

5522

1111

111

11111

11

1

1616

19.519.5

152025

1619.5263240

1619.5

25

282228332844

28312832 28422843

95272953729527395373

803180328033

5500255003550045500555006

5540255403

55033

METRIC/IMPERIALSTOPCOCKPOL X POL

METRIC/IMPERIALSTOPCOCKPOL x FI

METRIC/IMPERIAL¼ Turn BALL VALVE POL X POL

ARCTIC ICE RESISTANT BALL VALVE

BALL VALVEF.I. X F.I. BSP

BALL VALVEM.I. X M.I. BSP

AIR RELEASEVALVE F.I. BSP

SIZES PRICEEACH £PACKSNOMINAL

BOREPart No.DESCRIPTION

Stopcock

Ball Valve


VALVES – BACK FLOW PREVENTION & METAL VALVES

VALVES - END CONNECTORS20mm/½” x ½” BSP20mm/½” x ¾” BSP20mm/½” x 1” BSP25mm/¾” x ½” BSP25mm/¾” x ¾” BSP25mm/¾” x 1” BSP32mm/1” x ¾” BSP32mm/1” x 1” BSP32mm/1” x 1¼” BSP32mm/1” x 1½” BSP40mm/1¼” x 1” BSP40mm/1¼” x 1¼” BSP40mm/1¼” x 1½” BSP40mm/1¼” x 2” BSP50mm/1½” x 1½” BSP50mm/1½” x 2” BSP63mm/2” x 1½” BSP63mm/2” x 2” BSP

£3.94 £4.78 £7.57 £5.15 £5.01 £8.01 £7.29 £7.29

£15.25 £15.25 £17.16 £17.16 £19.09 £21.81 £18.64 £21.44 £26.25 £26.25

101010101010555511111111

922192229223923192329233924292439244924592539254925592569265926692759276

METRIC/IMPERIALEND CONNECTORPOL X M.I. BSP

SIZES NOMINALBORE

PRICEEACH £PACKSPart No.DESCRIPTION

¾” BSP1” BSP1¼” BSP1½” BSP2” BSP

¾” F.I. x ¾” F.I.1” F.I. x 1” F.I.1¼” F.I. x 1¼” F.I.1½” F.I. x 1½” F.I.2” F.I. x 2” F.I.

½” F.I. x ½” F.I.¾” F.I. x ¾” F.I.1” F.I. x 1” F.I.

½” x ½” F.I.¾” x ¾” F.I.1” x 1” F.I.1½” x 1½” F.I.2” x 2” F.I.

£42.69 £45.92 £56.42 £68.33 £91.54

£39.62£41.96 £52.25 £62.05 £84.61

£37.04 £48.61 £61.25

£45.38 £61.17

£113.03 £288.00 £402.38

11111

11111

111

11111

2227323850

2227323850

152025

5501255013550145501555016

5502255023550245502555026

111011120211303

25112522253320552066

FOOT VALVEF.I. BSP

SINGLE CHECKNON RETURNVALVEF.I. BSP X F.I. BSP

DZR DOUBLECHECK VALVEF.I. BSP X F.I. BSPto BS 6282

FI X FI GM(BS.5433 Type2)below is a list ofMetric/Imperial end connectors suitablefor use on our valves.

BACK FLOW PREVENTION CATEGORY 3



A TOUGH, CORROSION RESISTANT RANGE OFFITTINGS TO SUITE BSP THREAD STANDARDS

BSP THREADED FITTINGS

Lead FreeThe Philmac range of Threaded Fittings is completely free from lead.


BSP TAPERED THREADS

FULLY COMPREHENSIVE RANGE

COMPLIMENTS PLASTIC PIPELINES

ROBUST THREADED FITTINGS

PRECISION BSP TAPERED THREADSMaximises sealing performance

CORROSION RESISTANT

VERSATILE RANGE

HIGH PERFORMANCE UV PESISTANT MATERIALSPolypropylene

QUICK AND SIMPLE TO INSTALL

RELIABLE INSTALLATION

½” TO 2” PRODUCTS ARE ABLE TO OPERATE AT 16 BAR


THREADED FITTINGS

½” BSP¾” BSP1” BSP1¼” BSP1½” BSP2” BSP


½” x ½” BSP¾” x ¾” BSP 1” x 1” BSP 1¼” x 1¼” BSP1½” x 1½” BSP2” x 2” BSP


¾” x ½” BSP1” x ½” BSP1” x ¾” BSP1¼” x ½” BSP1¼” x ¾” BSP1¼” x 1” BSP1½” x ½” BSP1½” x ¾” BSP1½” x 1” BSP1½” x 1¼” BSP2” x ½” BSP2” x ¾” BSP2” x 1” BSP2” x 1¼” BSP2” x 1½” BSP3” x 2” BSP4” x 3” BSP


¾” x ½” BSP1” x ½” BSP1” x ¾” BSP1¼” x ½” BSP1¼” x ¾” BSP1¼” x 1” BSP

£3.82 £4.54 £5.69 £8.92 £9.71

£13.56

£3.23 £3.49 £4.01 £5.73 £6.85 £9.09

£3.15 £3.52 £4.12 £5.73 £6.62 £9.01

£1.62 £1.93 £2.26 £3.09 £3.45 £4.47

£2.11 £2.29 £2.29 £3.26 £3.37 £3.37 £3.89 £4.01 £4.01 £4.01 £6.28 £6.49 £6.49 £6.49 £6.49

£19.34 £37.60

£1.65 £1.88 £2.37 £2.96 £3.50 £4.65

£2.16£2.79£2.88£3.41£3.41£3.53

101010552

101010552

101010552

101010101010

10101010101010101010101010101011

101010555

101010555

451145224533454445554566

461146224633464446554666

469146924693469446954696

401140224033404440554066

41214131413241414142414341514152415341544161416241634164416541864198

421142224233424442554266

422142314232424142424243

TEEFEMALE

ELBOWFEMALE

ELBOWMALE X FEMALE

PLUG

BUSH – REDUCING

NIPPLE

NIPPLE – REDUCING

N.B. ALL THREADS ARE BSP TAPERED. USE PTFE TAPE ON THREADS FOR LUBRICATION PURPOSES. DO NOT OVERTIGHTEN.



THREADED FITTINGS

1½” x ½” BSP1½” x ¾” BSP1½” x 1” BSP 1½” x 1¼” BSP2” x ½” BSP2” x ¾” BSP2” x 1” BSP2” x 1¼” BSP2” x 1½” BSP


¾” x ½” BSP1” x ½” BSP1” x ¾” BSP1¼” x 1” BSP1½” x ¾” BSP1½” x 1” BSP1½” x 1¼” BSP2” x ¾” BSP2” x 1” BSP2” x 1½” BSP



2” x ¾” F.I. BSP2” x 1” F.I. BSP2” x 2” F.I. BSP


½” BSP¾” BSP 1” BSP

£4.25£4.25£4.25 £4.20£5.64£5.64£5.64£5.64£5.57

£3.40 £3.93 £4.87 £7.95 £8.68

£12.27

£3.80 £4.71 £7.69 £7.69 £8.40 £8.40 £8.40

£11.87 £11.87 £11.87

£3.23 £4.01 £4.54 £5.13 £6.54 £8.17

£3.13 £3.27 £3.66 £3.94 £4.21 £5.05

£17.68 £17.68 £17.68

£6.38 £6.62 £7.49 £9.32

£12.51 £15.22

£11.71£13.58£21.10

555555555

101010555

101055555555

101010555

10101010105

111

111111

111

425142524253425442614262426342644265

431143224333434443554366

4321433143324343435243534354436243634365

490149024903490449054906

RXHT15RXHT20RXHT25RXHT32RXHT40RXHT50

60UD075B60UD10B60UD20B

RXTTI15RXTTI20RXTTI25RXTTI32RXTTI40RXTTI50

TCK050TCK075TCK100

NIPPLE – REDUCING (Continued)

SOCKET

REDUCING SOCKET

CAP

M.I. BSP HOSE TAILS

IBC SWIVEL-IT ADAPTORS

MALE THREADED TANK CONNECTOR WITH FEMALE INLET

CUT TO SIZE TANK CONNECTOR KITS (PVC)Containing long thread(1 ft long), backnuts (2) and a washer



SUNDRIES

¾” standard thread 25mm tail¾” long thread 45mm tail c/w nut¾” long thread 45mm tail bent arm

Up to 32mm (Medium)Up to 63mm (Large)

20 - 32mm ‘Y’ spanner (plastic)40 - 63mm ‘Y’ spanner50 - 110mm ‘C’ spanner

16mm20mm25mm32mm40mm50mm63mm90mm110mm

20-32mm20-63mm

£27.44£28.95£28.22

£43.96£129.03

£6.75£42.34£58.53

£0.86£1.02£1.08£1.20£1.61£1.77£2.22£5.17£7.17

P.O.A.P.O.A.

111

11

111

101010101010101010

11

RXPTV20RXPTV20LRXPTV20B

17691770

70243170577050

430543064307430843094310431243134314

MINI2032MIDI2063

HIGH FLOWBALLCOCK

PIPE CUTTER

SPANNER

PIPE CLIPSSuitable for MDPE pipe

SQUEEZE OFF TOOLS



CHEMICAL RESISTANCE CHART

CHEMICAL RESISTANCE CHART

CHEMICAL SATISFACTORY NOT SATISFACTORY

Acetone •Alcohol •

Ammonium Hydroxide •Antifreeze •Benzene •Butane • •

Calciuim Salts •Caustic Sode (40% Aqueous) •

Chlorine •Citric Acid •

Copper Salts •Cresol •

Ethylene Alcohol •Ethyl Glycol •

Diesel •Formic Acid •

Gasoline •Hydrocloric Acid •

Kerosene •Methane •

Methlene Chloride •Mineral Oils •Nitric Acid •

Petroleum Oil •Sewerage •

Sodium Cyanide •Sulphuric Acid •

Toluene •Turpentine •

Transformer Oil •Zinc Salt Solution •

Dynamic sealing method: The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting so there is no risk of seal distortion or displacement.

No loose components: If the nut is removed there is no danger of losing components, as the collet and seal ring are retained in the body of the fitting. Losing components in the trench becomes a thing of the past.

Designed to minimise pipe twist: The fitting has been designed to minimise pipe twist as the nut is tightened. Maximum pipe twist is approximately a quarter turn compared to one and a half turns with many other fittings. Pipe twist can impact on not only the connection you have just made but also on the connection at the other end of the line.

Approvals: Philmac fittings are WRAS approved for above and below ground use.

High performanceMade from advanced thermoplastic materials: 3G Metric/Imperial™ is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The material is non-toxic and taint-free.

Rated to 1600 kpa: Metric/Imperial™ is pressure rated to 16 Bar (230psi) to meet the needs of high pressure systems.

50 year+ design life: Built to withstand the toughest conditions to ensure longevity and durability, Metric/Imperial™ has a 50 year+ design life.

Complete coverageWide range: The new Philmac 3G Metric/Imperial™ range is comprehensive: straight and reducing joiners, tees, elbows, end connectors and caps ranging from 20mm to 63mm. Also available are copper connection kits, normal gauge (IRS 134) connection kits, reducing kits and blanking plugs, ball valves, stopcocks, wall plate elbows and tank connectors.

Effect on Water Philmac does not impart to water any odour, taste, colour, or any constituents in concentrations that could be injurious to health.

Philmac complies with:-BS 6920 ‘Suitability of non metallic products for use in contact with potable water intended for human consumption with regard to their effect on the water’.

Operating Temperatures:- -10oC to +25oC Not suitable for hot water applications.

Fluids other than Water:-Pipes connected by Philmac may convey a wide variety of fluids. For resistance to common chemicals consider the following table a guide only.

For specific applications:-please contact our Customer Service Support Centre for advice and information.

Telephone: 01323 847323 Facsimile: 0800 590028


PHILMAC UK CUSTOMER SERVICES

Get in touch with our customer service and enquiry team by phone,fax or email:

Tel No: +44(0) 1323 847323

Fax: 0800 590028

Email: [email protected]

BARRY MCKIBBINArea Sales Manager07909 [email protected]

JON CLARKArea Sales Manager07885 [email protected]

MARK CULSHAWArea Sales Manager07787 [email protected]

STEVE JEFFERYArea Sales Manager07795 [email protected]

ANDY FUNNELLUK Sales Manager & Technical Support07748 [email protected]

MATT PROLEArea Sales Manager07771 [email protected]


TERMS AND CONDITIONS / CONDITIONS OF SALE

DEFINITIONS:“Seller” shall mean Glynwed Pipe Systems Limited, trading as Philmac, Registered in England under number 1698059. “Buyer” shall mean any company, organisation or individual to whom a quotation is offered, or whose order is accepted by the Seller.

CONDITIONS:All offers, quotations, estimates, acceptances and contracts are subject to these Conditions of Business and any terms or conditions which any other person shall seek to impose or make part of any contract shall, so far as is inconsistent with these Conditions of Business, not apply unless expressly agreed by the Seller in writing. The headings in these conditions are for convenience only and shall not affect their interpretation.

QUOTATIONS AND PRICE VARIATION:Any quotation given by the Seller is an invitation to the Buyer to make an offer only and no order of the Buyer placed with the Seller in pursuance of a quotation or otherwise shall be binding on the Seller unless and until it is accepted in writing by the Seller.

Unless stated otherwise, all quotations and published price lists are ex works, exclusive of VAT and shall remain valid for 30 days or such a period as may be quoted but nevertheless the Seller may amend or withdraw any quotation by written or oral notice. Quotations may be varied if the Buyer makes variations in his specifications.

STATEMENTS OR REPRESENTATIONS TO THE BUYER:If any statement or representation has been made to the Buyer upon which the Buyer relies other than in the documents enclosed with the Seller’s quotation, the Buyer must set out that statement or representation in a document to be attached to or endorsed on the order in which case the Seller may submit a new quotation.

DELIVERY - TIME:Any period for delivery given at any time and in any manner by the Seller is an estimate only and is not binding on the Seller. Delivery periods are normally calculated from the later of:acceptance of order; orwhere applicable, the receipt by the Seller of a detailed specification or drawings.

Time shall not be deemed to be of the essence of the contract. Failure by the Seller to meet any quoted delivery period for any part or the whole of the order shall not entitle the Buyer to rescind the contract or to claim damages of any nature.

The Seller will endeavour to comply with reasonable requests by the Buyer for postponement of delivery but shall be under no obligation to do so. Where delivery is postponed otherwise than due to default by the Seller the Buyer shall pay all costs and expenses including a reasonable charge for storage and transportation occasioned thereby and an extra charge for split delivery if applicable.

The Buyer will receive delivery of any consignment between the hours of 8.0am and 4.0pm Monday to Friday inclusive, unless otherwise agreed in writing. Cost incurred by the Seller arising from the Buyer’s refusal to accept consignments within the agreed hours shall be borne by the Buyer.

DELIVERY AND RISK:Except where stated to the contrary in the contract, delivery shall be made as follows:

where the Buyer provides the transport, delivery shall be made ex the Seller’s works;where the Seller provides the transport, delivery shall be made to the premises of the Buyer, or the premises of the Buyer’s customer or works site if the Buyer has requested delivery to be so made but where the Buyer has made such a request the Seller will make a first delivery to the Buyer’s customer or works site as so much of the goods as is available for that delivery but subsequent deliveries will be made to the premises of the Buyer.

The Seller may at its discretion make partial delivery of orders and invoice the same.

Risk in the goods shall pass on delivery.

Where goods are sent FOB the Seller’s responsibility shall cease when the goods are placed on board ship or aircraft without the need for the Seller to give notice to the Buyer and the provisions of Section 32(3) of the Sale of Goods Act 1979 shall not apply.

OWNERSHIP OF GOODS:The goods shall remain the sole and absolute property of the Seller as legal and equitable owner until such time as the Buyer shall have paid to the Seller the contract price together with the full price of any other goods the subject of any contract between the Seller and the Buyer.

The Buyer acknowledges that until such time as the property in the goods passes to the Buyer he is in possession of the goods as a bailee and fiduciary agent for the Seller and the Purchaser shall store the goods in such a manner that they are clearly identifiable as the property of the Seller.

Until payment due under all contracts between the Buyer and the Seller had been made in full, in the event of sale of the goods by the Buyer:

the Seller shall be entitled to trace all proceeds of sale received by the Buyer through any bank or other account maintained by the Buyer; andthe Buyer shall if requested by the Seller in writing to so assign its rights to recover the selling price of the goods from the third parties concerned. Such monies to be held separately by the Buyer as agent on behalf of the Seller.

The Seller may for the purpose of recovery of its goods enter upon any premises where they are stored or where they are reasonably thought to be stored and may repossess the same.

TERMS OF PAYMENT:In the event of default in payment according to the agreed payment terms between the Seller and the Buyer – ie: by the end of the month following the month of despatch of the goods the Seller shall be entitled without prejudice to any other right or remedy to suspend all further deliveries and to charge interest on any amount outstanding at the rate of 2% per month until payment in full is made (a part of a month being treated as a full month for the purpose of calculating interest).

SHORTAGES AND DEFECTS APPARENT ON DELIVERY:It shall be the responsibility of the Buyer to inspect or arrange for an inspection of the goods on delivery whether the goods are delivered to the Buyer’s premises or to the premises of the Buyer’s customer or to a works site. If no such inspection is made the Buyer shall be deemed to have accepted the goods.

The Buyer shall have no claim for shortages or defects apparent on inspection unless:

a written complaint is made to the Seller within three days of receipt of the goods specifying the shortage or defect; andthe Seller is within seven days of receipt of the complaint given an opportunity to inspect the goods and investigate the complaint before any use is made of the goods.If a complaint is not made to the Seller as herein provided then in respect of such shortages or defects the goods shall be deemed to be in all respects in accordance with the contract and the Buyer shall be bound to pay for the same accordingly.

CLAIMS FOR DEFECTS NOT APPARENT ON INSPECTION:The Buyer shall have no claim for defects not apparent on inspection unless the Seller is notified of defective workmanship or materials within twelve months from delivery of the goods. Provided that the goods have been installed and applied in accordance with any relevant recommendations made by the Seller, the Seller will at its option replace the goods or refund the net invoiced price in respect of the goods which have been shown to be defective. If the Seller does so supply substitute goods the Buyer shall be bound to accept such substituted goods in full satisfaction of the obligations of the Seller under the contract.

The Buyer shall in any event have no claim or set-off in respect of defects unless a written complaint is sent to the Seller as soon as the defect is noticed and no use is made of the goods thereafter or alteration made thereto by the Buyer before the Seller is given an opportunity to inspect the goods.

The Buyer is responsible for ensuring that the goods are fit for any particular purpose, and no warranty or condition of fitness for any particular purpose is to be implied into the contract.

LIABILITY:Save as stated in Conditions 9 and 10 (and save in respect of death or personal injury resulting from the negligence of the Seller its servants or agents) the Seller shall not be liable for any claim or claims for direct or indirect consequential or incidental injury loss or damage made by the Buyer against the Seller whether in contract or in tort (including negligence on the part of the Seller its servants or agents) arising out of or in connection with any defect in the goods or their fitness or otherwise for any particular purpose or any act omission neglect or default of the Seller its servants or agents in the performance of the contract.

FORCE MAJEURE:Notwithstanding anything herein contained neither the Buyer nor the Seller is to be held liable for any delay or failure to carry out the contract due wholly or in part to an act of God action by any Government whether British or foreign civil war strikes and/or lockouts wheresoever occurring fire trade disputes floods or unfavourable weather or any material becoming unavailable or irreplaceable (whether at all or at commercially acceptable prices) or any other circumstances beyond the control of the Seller.

SUB-CONTRACTING:The Seller reserves the right to sub-contract the fulfilment of any order or any part thereof.

INSOLVENCY AND BREACH OF CONTRACT:In the event that: the Buyer commits any breach of the contract and fails to remedy such breach (if capable of remedy) within a period of thirty days from receipt of a notice in writing from the Seller requesting such remedy; or any distress or execution is levied upon any of the goods or property of the Buyer; or the Buyer offers to make any arrangements with or for the benefit of its creditors or (if an individual) becomes subject to a petition for a bankruptcy order or (being a limited company) has a receiver appointed of the whole or any part of its undertaking property or assets; or an order is made or a resolution is passed or analogous proceedings are taken for the winding up of the Buyer (save for the purpose of reconstruction or amalgamation with insolvency and previously approved in writing by the Seller) the Seller shall thereupon be entitled without prejudice to its other rights hereunder forthwith to suspend all further deliveries until the default has been made good or to determine the contract and any unfulfilled part thereof or at the Seller’s option to make partial deliveries. Notwithstanding any such termination the Buyer shall pay to the Seller at the contract rate for all the goods delivered up to and including the date of termination.

INDUSTRIAL PROPERTY RIGHTS:If goods supplied by the Seller to the Buyer’s design or specifications infringe or are alleged to infringe any patent or registered design right or copyright the Buyer will indemnify the Seller against all damages, costs and expenses incurred by the Seller as a result of the infringement or allegation. The Buyer will give the Seller all possible help in meeting any infringement claim brought against the Seller.

BUYER’S ERROR IN ORDERING:In the event the Buyer orders incorrectly the Seller will be under no obligation to the Buyer to rectify or assist in rectifying the error.

LAW AND JURISDICTION:The contract shall be subject in all respects to English Law and to the jurisdiction of theEnglish Courts.


www.philmac.co.uk

JUN

E2016/91003For further information on all Philmac products and services please contact our Internal Sales Department

Philmac UK is a trade name of Glynwed Pipe Systems Ltd. Company number 1698059

Registered Office:

PhilmacPhilmac UKDickey LaneLenhamKentME17 2DE

UNITED KINGDOM

PhilmacDiplocks WayHailshamEast SussexBN27 3JF

UNITED KINGDOM

Telephone +44 (0) 1323 847 323Facsimile +44 (0) 800 590 028Email [email protected] www.philmac.co.uk

PHILMAC CUSTOMER SERVICEHelpline +44 (0) 1323 847 323

www.philmac.co.ukPHILMAC ACADEMY E-LEARNING CENTREwww.philmacacademy.co.uk

Documents

2016 - Philmac: The connection you can trust · PHILMAC 2016 PRODUCT PRICE CATALOGUE 3 Philmac are a provider of pipe connection solutions in the Plumbing, Utility, Industrial, Agricultural