12

 · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 2:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 3:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 4:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 5:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 6:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 7:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 8:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 9:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 10:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 11:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,
Page 12:  · 2016. 7. 6. · surface of sample and glass slide have to be clean and dry. The rough surfaces should be sticked. STEP 4: Curing the Adhesive Resin Adhesive resin have to be cured,