Embed Size (px)
Citation preview
Liftmaster B1Innovative handling aid
Easy and secure handling of structural components of up to 396 lbs (180 kg) Easy assembly of structural components Ideal for transport in-house and on construction sites Can be disassembled easily, fits in any truck or SUV.
2 Metric specifications are exact · inches are approximate
Innovative handling aid
Telescopic counterweightsFor high stability
HandlesFor manual transport and spring-assisted tilting of the Liftmaster or shifting the load to the front
Vacuum lifter with dual circuit vacuum system
Front wheelsAdjustable wheel axle
Trailing wheel with locking brake
Large rubber sheetsFor quick and safe support and transport of the load
Slide unit, pivoting mechanismSwivelling lever with locking hole for shifting the load to the front or tilting the load
Cable winchFor safe and precise lifting and lowering of loads
Connection of the vacuum lifterBO B18DM4 via quick coupling system
PedalFor unlocking the rotating mechanism of the rack
3-15/16“(100mm)
ø 11
-13/
16“
(300
mm
)
42-11/16“ (1085mm)
37-1
3/16
“ (9
60m
m)
60-1/16“ (1525mm)34-5/8“ (880mm)
79-3
/4“
(202
5mm
)
102-
3/8“
(260
0mm
)
69-5
/16“
(176
0mm
)22
5/8
“ (5
75m
m)
2-9/
16“
(65m
m)
36“
(915
mm
)
31-1/8“(790mm)
19-1/2“ (495mm)
77-1
5/16
“ (1
980m
m)
47-1
/4“
(120
0mm
)
47-1/4“ (1200mm)
10-7/16“(265 mm)
19-1/8“ (485mm)
20-1
1/16
“ (5
25m
m)
25-3
/8“
(645
mm
)
3T +1 877 678 2021 (toll free) · F +1 877 678 2022 (toll free) · [email protected] · www.bohle-america.com
Liftmaster B1 Lifting System with dual circuit vacuum lifter
Features
n Easy and secure handling of structural components of up to 396 lbs (180 kg)
n Stable construction
n Rack can be rotated and tilted
n Easy assembly of structural components
n Ideal for transport within company premises and on construction sites
n Can be disassembled easily, fits in any truck or SUV.
n Very compact and maneuverable
n Fits through standard doors
n Handle is height adjustable
n Vacuum lifter · can be rotated by 360° · can be removed very easily and used separately together with a crane · has a dual circuit vacuum system with 4 suction pads · is very flat and compact · is equipped with a vacuum indicator for monitoring the vacuum · The vacuum is generated via a hand pump, therefore ready for use at all times (no previous charging of batteries required) · Weight: 44 lbs (20 kg)
Specifications
Length 51-3/16“ (1.3 m)
Width (with extended axles widening the gauge) 31-1/8“ - 70-7/8“ (0.79 - 1,.8 m)
Height 77-15/16“ (1.98 m )
Art. No. BO 88.01
Art.-Nr.
BO 88.025 Additional counterweight 55 lbs (25 kg)
8-1/16“ (205mm)48-5/8“ (1235mm)36-1/4“ (920mm)
27-9/16“ (700mm)
41-3
/4“
(106
0mm
)19
-11/
16“
(500
mm
)
32-1
/16“
(815
mm
)
3-3/4“ (95mm)
2-3/8“ (60mm)
2“ (5
0mm
)
www.bohle-america.com
Manual lifting device B18DM4 The new manual lifting device can do without electric pump and is therefore very versatile in use. A dual circuitvacuum system, reserve tanks, vacuum display and an additional visual vacuum indicator guarantee highest safety.The manual lifting device stands out due to its very compact construction and low weight. Among other things, itis used together with Liftmaster B1 for holding loads. It can moreover be used independently. For this purpose thelifting device is equipped with crane eyelets; optionally two different crane arms (vertically rotatable by 360° andhorizontally tiltable by 90°) are available as additional equipment. Apart from this, the lifting device can also be usedfor fixing and holding loads in customised projects.
Load capacity max. 396 lbs (180 kg) · Weight approx. 44 lbs (20 kg) · Dimensions 35-13/16“ x 20-1/16“ x 3-15/16“ (910 mm x 510 mm x 100 mm) · Turns 360 ° · Tiltable 90 °
Art. No.
BO B18DM4
2016
-606
8 · 0
6-16
· US
A
USA
Bohle America, Inc.10924 Granite StreetSuite 200Charlotte, NC 28273
T +1 877 678 2021 (toll free)F +1 877 678 2022 (toll free)
BO 88.026
BO B18DM4 Complete Vacuum frame with arm for rotating and tilting for lifting device B18DM4
Arm for rotating and tilting for lifting device B18DM4
