2014 Heatcraft Australia Refrigeration Equipment Price Guide

Refrigeration Equipment

12 For friendly service and advice visit your local Heatcraft branch or call 13 23 50

S1: Refrigeration Equipm

ent

HERMETIC COMPRESSORS – RECIPROCATING

KIRBY HERMETIC COMPRESSORS - R134a

Part NumberNom.

HPDispl. cc/rev

Nominal Capacity: Watts Evaporating Temperature: °C

Nom. Current

FLAList

Price-40 -30 -25 -20 -15 -10 -5 0 5

Domestic R134a LBP Compressors (POE Oil)

AZ33LY-1KS 1/12 3.28 54 73 94 126 168 1.2 $265.55

AZ36LY-1KS 1/10 3.59 57 78 101 134 179 1.2 $270.42

AZ40LY-1KS 1/8 4.00 66 86 111 142 185 1.4 $275.27

AZ56LY-1KS 1/6 5.59 83 108 140 182 238 1.6 $283.36

AEV6LY-1KS 1/5 5.99 89 116 150 195 255 1.6 $315.75

AEV7LY-1KS 1/5 6.91 108 140 182 236 309 1.7 $317.37

AEV8LY-1KS 1/4 8.12 124 162 209 272 356 1.8 $325.47

AEV9LY-1KS 1/4 9.42 147 191 248 322 421 2.5 $348.14

Commercial R134a L/M/HBP Compressors (POE Oil)

BA8LMY-1KS 1/5 7.55 85 130 182 240 310 400 500 615 1.8 $428.96

BA9MHY-1KS 1/4 8.88 210 270 350 450 570 700 2.6 $481.07

BA12LMY-1KS 1/4 12.10 150 220 300 390 480 590 730 910 2.9 $531.81

BA14LMY-1KS 1/3 14.10 175 255 340 445 560 700 860 1030 4.0 $597.27

BA16LMY-1KS 3/8 16.10 220 310 420 540 680 840 1030 1260 2.8 $688.88

BA16LZ-1KS 3/8 16.10 225 315 430 550 695 860 1055 1290 2.3 $877.30

BA18LZ-1KS 1/2 18.00 280 370 480 600 750 930 1140 1390 3.5 $955.62

WJ22LZ-1C 5/8 21.50 420 620 820 1110 1430 1810 4.1 $1,063.62

WJ26LZ-3C 3/4 26.70 510 730 1010 1370 1740 2220 4.6 $1,145.44

WJ31LZ-1C 1 30.50 580 830 1140 1560 2040 2590 5.5 $1,485.81

AW40LZ-1C 1 39.60 740 1090 1480 1970 2500 3050 4.7 $1,952.14

AW43LZ-5C 1 43.10 840 1240 1690 2240 2850 3480 5.8 $2,233.60

AW48MHY-3C 1-1/2 48.40 820 1210 1790 2410 3150 4130 8.2 $2,192.68

AW54LZ-1C* 1-1/2 53.50 510 860 1200 1690 2200 2830 3610 4500 7.8 $2,457.78

AV79MHY-1C 2 79.00 1180 1770 2530 3640 5000 6570 13 $2,878.99

AV79MHY-2C 2 79.00 1180 1770 2530 3640 5000 6570 6.2/PH $3,070.06 *AW54LZ-1C - Use without run capacitor on LBP applications

Compressors

Domestic Replacement LBP Compressors with Mineral Oil**

AE1411A-7KS** 1/4 14.14 200 425 570 735 2.6 $369.19

Commercial Replacement L/M/HBP Compressors with Mineral Oil*

AE10LMA-1KS** 1/4 10.25 110 235 320 415 525 655 805 2.5 $550.56

AGA4534AXG** 2-3/4 100.70 1520 2400 3400 4500 5750 7200 9000 11200 5.5/PH $3,114.56

AGA4543AXG** 2-3/4 124.40 2000 3200 4450 5800 7400 9100 11400 14200 7.0/PH $3,374.09 **Mineral Oil Compressors are not suitable for R134a refrigerants

13Prices effective 01.04.14 • All prices are exclusive of GST • Subject to change without notice

Sec 1: Refrigeration Equipment

S1: R

efrig

erat

ion

Eq

uipm

ent

STANDARD CONDITIONS

ApplicationEvaporating

Temp °CCond.

Temp °CLiquid Entering

Temp °CReturn Vapour

Temp °C

Nominal Capacities are established through ASHRAE-T standard conditions

Low Suction Temp -23.3 55 32 32

Med Suction Temp -6.7 55 47 35

High Suction Temp 7.2 55 47 35

A/C Suction Temp 7.2 55 47 35

Note: Stated Capacity (Watt) in the above chart have been established at these conditions using nominated refrigerants and are accurate to +/-5%. To establish capacities at design conditions, the following factors may be used:

• For lower condensing temperatures: increase capacity 6% for every 5°C lower condensing temperature.

• For higher condensing temperatures: decrease capacity 6% for every 5°C higher condensing temperature.

• For lower liquid entering temperatures: increase capacity 1% for every 1°C lower liquid entering temperature.Features:

• All hermetic compressors require a cooling fan unless otherwise specified• Low start torque compressors (i.e. with RSIR motors) require capillary refrigerant control.• High start torque compressors (i.e. with CSIR, CSR or 3 Phase motors) can be used with

capillary or TX Valve control

KIRBY HERMETIC COMPRESSORS - R404A / R507

Part NumberNom. HP

Displ. cc/rev

Nominal Capacity: R404A (Watts ) Evaporating Temperature: °C Nom. Current

FLA List Price-40 -35 -30 -25 -20 -15 -10 -5

BA Commercial Series LBP Compressors (POE Oil) 240V / 1 Phase

BA8MG-1KS 1/4 7.55 137 210 295 385 490 2.6 $440.17

BA12LMY-1KS 1/3 12.01 190 310 440 585 745 2.9 $531.81

BA16LMY-1KS 3/8 16.10 330 465 620 810 1025 2.8 $688.88

BA16LZ-1KS 3/8 16.10 335 475 635 830 1050 2.3 $877.30

BA18LZ-1KS 1/2 18.00 400 550 720 930 1180 3.5 $955.62

WJ Commercial Series LBP Compressors (POE Oil) 240V / 1 Phase

WJ22LZ-1C 3/4 21.60 360 560 810 1130 1490 3.3 $1,063.62

WJ26LZ-3C 7/8 26.80 420 670 990 1390 1850 4.8 $1,145.44

WJ31LZ-1C 1 30.50 530 820 1180 1610 2130 5.5 $1,485.81

AW Commercial Series LBP Compressors (POE Oil) 240V / 1 Phase

AW40LZ-1C 1 39.60 590 900 1325 1890 2590 4.7 $1,952.14

AW43LZ-5C 1-1/4 43.10 680 1030 1540 2160 2890 5.8 $2,233.60

AW54LZ-1C 1-1/2 53.50 780 1250 1920 2760 3660 7.8 $2,457.78

AV Commercial Series LBP Compressors (POE Oil) 415V / 3 Phase

AVA2490ZXG 2 73 900 1600 2400 3350 4500 8.3 / PH $2,945.37

Application of R407F and other HFC refrigerant alternatives should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36


ent

13 23 50heatcraft.com.au

Leading compressor brands for every application

You’ll always find an extensive range of compressors on hand throughout the Heatcraft branch network. With leading brands such as Kirby, Danfoss, Dorin, Maneurop, Copeland, Bristol and Hanbell, we’re able to bring you the latest designs and innovation for a diverse range of applications. Our compressors work hard to increase efficiency and decrease cost of ownership, while operating quietly and reliably.

From a stand-alone refrigeration cabinet to a complex CO2 rack, we have hermetic, semi-hermetic, scroll, open-drive, screw and rotary compressors to do the job. Our compressors are designed to cover low, medium and high temperature applications using all common HFC and HCFC refrigerants, as well as natural refrigerants.

Contact your local Heatcraft branch on 13 23 50 for more information.

Heatcraft_Compressor_AD_PG_AU14.indd 1 20/02/2014 4:11:44 PM



S1: R

efrig

erat

ion

Eq

uipm

ent

KIRBY HERMETIC COMPRESSORS - R22 / R507 / R404A / R407C (CONT'D)

Part NumberNom. HP

Displ. cc/rev

Nominal Capacity: R22 (Watts) Evaporating Temperature: °C

Nom. Current

FLA Height (mm)List

Price-15 -10 -5 0 5 10

BA Commercial Series - 240/1 M/HBP (POE Oil)

BA5MHG-1KS 1/5 4.48 225 275 340 415 505 610 1.7 189 $373.09

BA6MHG-1KS 1/4 5.5 270 325 407 490 590 705 2.8 189 $440.17

BA8MG-1KS 1/4 7.6 360 465 580 720 870 2.8 202 $440.17

BA9MG-1KS 1/3 8.9 460 565 705 860 1030 3.2 202 $507.28

BA12MG-1KS 3/8 12.0 665 820 1020 1220 1440 2.8 215 $628.36

BA14MG-1KS 1/2 14.1 790 995 1230 1490 1800 3.4 215 $723.27

BA16MG-4KS 3/4 16.2 880 1120 1390 1700 2060 3 215 $815.80

BA18MG-1KS 7/8 18.0 980 1230 1530 1870 2250 4.4 215 $882.96

WJ Commercial Series - 240/1 M/HBP (POE Oil)

WJ22MHG-1C 1 21.5 1180 1530 1920 2390 2920 3540 5.6 275 $1,063.62

WJ26MHG-3C 1-1/4 26.8 1520 1950 2430 2960 3540 4170 7 275 $1,088.15

WJ31MHG-1C 1-1/2 30.5 1650 2130 2680 3300 4000 4770 7.9 275 $1,269.80

AW Commercial Series - 240/1 M/HBP (POE Oil)

AW38MG-1C 1-1/2 37.5 1685 2239 2860 3620 4519 7.9 310 $1,893.25

AW43MHG-1C 2 43.1 2097 2799 3600 4469 5490 6760 9.6 340 $2,109.23

AW48MHG-1C 2-1/2 48.4 2360 3150 3980 4990 6210 7717 11.2 340 $2,192.68

AW54MHG-3C 2-1/2 53.5 2612 3540 4508 5710 7109 8710 12.5 340 $2,257.68

AW Commercial Series - 415/3 M/HBP (POE Oil)

AW43MHG-4C 2 43.1 2097 2799 3600 4469 5490 6760 9.6/PH 340 $2,089.41

AW48MHG-4C 2-1/4 48.4 2360 3150 3980 4990 6210 7717 3.2/PH 340 $2,163.81

AW54MHG-4C 2-1/2 53.5 2612 3540 4508 5710 7109 8710 12.5/PH 340 $2,236.66

AV Commercial Series - 415/3 M/HBP (POE Oil)

AV67MHG-2C 2-3/4 67 2500 3660 5000 6570 8360 10370 5.2/PH 500 $2,530.85

AV73MHG-2C 3 73.3 2920 4170 5560 7340 9200 11340 5.8/PH 500 $2,613.44

AV91MHG-2C 4-1/2 91.0 4260 5750 7500 9740 12000 14470 7.8/PH 500 $2,822.31

AV92MHG-2C 5 91.0 4440 5930 7700 9990 12350 14990 7.6/PH 500 $2,909.76

AG Commercial Series - 415/3 M/HBP (POE Oil)

AG125MHG-2C 5-3/4 125.0 4750 6450 8650 11370 14600 18340 9.8/PH 580 $3,301.81

AG135MHG-2C 6 135.0 5140 6970 9350 12290 15780 19830 10.9/PH 580 $3,668.14

STANDARD CONDITIONS

ApplicationEvaporating

Temp °CAmbient Temp °C

Cond Temp °C

Liquid Entering Temp °C

Return Vapour Temp °C

Nominal Capacities are established through ASHRAE-T standard conditions

Low Suction Temp -23.3 32 55 32 32

Med Suction Temp -6.7 35 55 47 35

High Suction Temp 7.2 35 55 47 35

A/C Suction Temp 7.2 35 55 47 35

Note:

Stated Capacity (Watt) in the above chart have been established at these conditions using nominated refrigerants and are accurate to +/-5%. To establish capacities at design conditions, the following factors may be used:



• For lower liquid entering temperatures: increase capacity 1% for every 1°C lower liquid entering temperature.

Features:






ent

KIRBY HERMETIC COMPRESSORS - R22 AIR CONDITIONING

Part NumberNom. HP

Displ. cc/rev

Power Input

(Watts)

Nominal Capacity: R22 (Watts) Evaporating Temperature: °C

Rating Point 7.2

Height (mm)

Oil* Type

List Price-15 -10 -5 0 5 10

AK Series 240V / 1 PHASE M/HBP

AKA5512EXC 1 22.3 1175 1300 1680 2110 2670 3310 2930 247 1 or 2 $973.89

AJ Series 240V / 1 PHASE M/HBP

AJB5515EXC 1-1/4 26.1 1610 1680 2175 2730 3340 4020 3670 272 1 or 2 $1,330.48

AJA5518EXC 1-1/2 32.7 1980 2200 2760 3420 4190 5010 4510 283 1 or 2 $1,372.05

AJA5519EXC 1-1/2 34.2 2110 2300 2860 3570 4380 5270 4720 283 1 or 2 $1,420.04

AW Series 240V / 1 PHASE M/HBP

AW5522EK-3C 1-3/4 39.6 1900 2240 2980 3860 4880 6000 5330 322 1 $1,392.66

AW5524EK-3C 2 43.1 2100 2530 3380 4360 5540 6790 6050 322 1 $1,421.30

AW5528EK-3C 2-1/4 48.4 2440 2930 3870 4980 6280 7650 6830 322 1 $1,441.51

AW Series 415V / 3 PHASE M/HBP

AW5532EK-3C 2-1/2 53.5 2700 3320 4340 5580 7040 8560 7630 322 1 $1,589.69

AW5524G-4C 2 43.1 2100 2530 3380 4360 5540 6790 6050 322 1 $1,773.07

AW5528G-4C 2-1/4 48.4 2440 2930 3870 4980 6280 7650 6830 322 1 $1,807.88

AW5532G-4C 2-1/2 53.5 2700 3320 4340 5580 7040 8560 7630 322 1 $1,837.49

AV Series M/HBP (EXC = 240V / 1 PHASE, EXG = 415V / 3 PHASE)

AVA5535EXG 2-3/4 62.4 2900 3260 4440 5870 7675 9600 8590 388

1 or 2

$1,813.53

AVA5538EXC3 67 3015 3570 4855 6400 8380 10480 9380 391

$1,824.87

AVA5538EXG $1,922.03

AVA5542EXC3-1/2 73.3 3505 3950 5370 7090 9270 11600 10380 370

$2,096.90

AVA5542EXG $1,766.58

AVA5546EXC4 79 3830 4320 5880 7760 10150 12700 11360 370

$1,873.46

AVA5546EXGB $1,983.56

AVA5555EXG 4-1/291

4500 5100 6950 9170 12000 15010 13430391

$1,811.39

AVB5558EXG 4-3/4 4640 5220 7100 9370 12260 15340 13720 $2,194.05

AG Series 415V / 3 PHASE M/HBP

AGC5561EXG 5 112.5 5250 6135 8165 10590 13600 16800 14880 399 3

AGC5561EXGB 5-3/4 124.5 6040 6970 9180 11860 15250 18880 17800 412 3 $2,623.62

AG125MHG-2C 5-3/4 125.0 5970 4750 6450 8650 11370 14600 18340 16470 580 4 $2,467.25

AG135MHG-2C 6 135.0 6290 5140 9350 12290 15780 19830 8540 17805 580 4 $3,301.81

AGA5573EXG 6 135.1 6250 7500 9800 12630 16300 20230 17680 412 3 $3,668.14 *Note: Oil Type 1 is a Mineral oil, Oil Type 2 is a Synthetic oil and 4 a Polyol Ester (POE) oil. Typical approved oils are for Mineral - Suniso 3GS, Synthetic - CPI AB46 and Polyol Ester - Emkarate RL32H. EXC = 1 Phase EXG = 3 Phase

STANDARD CONDITIONS

ApplicationAmbient Temp °C

Condensing Temp °C



Nom. Capacity & Power Input W @ SST °C Standard

Air Conditioning 35 55 47 35 7.2 ARI

HERMETIC COMPRESSORS – RECIPROCATING (CONT'D)

Note:

Stated Capacity (Watt) in the above chart have been established at these conditions using nominated refrigerants and are accurate to +/-5%. To establish capacities at design conditions, the following factors may be used:



• For lower liquid entering temperatures: increase capacity 1% for every 1°C lower liquid entering temperature.

Features:





S1: R

efrig

erat

ion

Eq

uipm

ent

BRISTOL HERMETIC COMPRESSORS - R22 AIR CONDITIONING (AB OIL)

Part Number HPkW Capacity @ 7.2°C

Evaporating Temp 50HZ Description List Price

Single Phase

H23B17QABHA 1.4 4.1 Reciprocating, Solder $966.83

H29B24UABHA 2 6 Reciprocating, Solder $1,382.53

H29B28UABHA 2.3 6.9 Reciprocating, Solder $1,474.56




H23A383ABKA 3 9.5 Reciprocating, Solder $1,694.97

H23A423ABKA 3.3 10.2 Reciprocating, Solder $1,769.16

H23A463ABKA 3.8 11.5 Reciprocating, Solder $1,825.34

Three Phase

H23A383DBEA 3 9.2 Reciprocating, Solder $1,892.68

H23A423DBEA 3.5 10.3 Reciprocating, Solder $1,915.12





H29A683DBVA 5.9 17.1 Reciprocating, Solder $2,691.63

H29A723DBVA 6 17.8 Reciprocating, Solder $2,726.50

H2BG094DBEE 7.5 21.2 Reciprocating, Rotolock $5,660.73

H2BG104DBEE 9 24.7 Reciprocating, Rotolock $5,741.60

H25G104DBVE 8.3 24.9 Reciprocating, Solder $5,970.22

H2BG124DBEE 10 28.5 Reciprocating, Rotolock $6,055.20

H25G124DBVE 10 28.8 Reciprocating, Solder $6,091.09

H25G144DBVE 12 34.2 Reciprocating, Solder $6,819.91

H25G144DBEE 12 34.2 Reciprocating, Rotolock $7,774.72

H2NG184DPEF 15 43.1 Reciprocating, Single Speed $13,521.45

H2NG184GPEF 15 43.1 Reciprocating, Dual Speed $13,817.06

H2NG204DREF 17 50.9 Reciprocating, Single Speed $13,446.51


H2NG244DREF 20 58.6 Reciprocating, Single Speed $13,941.00


H2NG294DPEF 25 69.8 Reciprocating, Rotolock $14,371.01

Multistack - Three Phase

H2NG244GPEFM 20 58.6 Reciprocating, Dual Speed $15,276.74

Note:

• Compressors are charged with Alkylbenzene (AB) oil. • Compressors supplied with rubber mounting kit,CCH & Solid State Modules where applicable. • Service valves & Single Phase electrics are excluded from price. Contact Heatcraft for further information.



ent

Part NumberModel

NumberNom HP

Disp cc/rev

Capacity (W) Compressor Cooling

Electrical

List Price

Low Med High

VoltageMotor Type-23.3 -6.7 7.2 LBP HBP

R507/R404A/R22 M/HBP Compressors

103U2680SP FR6DL 1/4 6.23 - 468 795 - F2 240/1 CSIR $625.86

104L2525SP SC10DL 3/8 10.29 - 771 1345 - F2 240/1 CSIR $690.61

104L2625SP SC12DL 1/2 12.87 - 929 1662 - F2 240/1 CSIR $759.38

104L2684SP SC12D 3/8 10.29 - 802 1412 - F2 240/1 CSIR $682.28

104L2839SP SC15D 3/4 15.28 - 1188 2046 - F2 240/1 CSIR $977.05

104L2856SP SC15DL 3/4 15.28 - 1166 2021 - F2 240/1 CSIR $849.82

R507/R404A LBP Compressors

103U2670SP FR6CL 1/5 6.23 266 472 - F2 - 240/1 CSIR $558.39

103U2890SP FR8.5CL 1/4 7.95 333 580 - F2 - 240/1 CSIR $625.86

104L2523SP SC10CL 1/3 10.29 362 796 - F2 - 240/1 CSIR $648.23

104L2623SP SC12CL 1/3 12.87 480 970 - F2 - 240/1 CSIR $756.30

104L2853SP SC15CL 3/8 15.28 624 1215 - F2 - 240/1 CSIR $833.30

104L2123SP SC18CL 1/2 17.69 722 1339 - F2 - 240/1 CSIR $928.70

104L2322SP SC21CL 5/8 20.95 853 1582 - F2 - 240/1 CSIR $1,007.28

R134a L/MBP Compressors

102G4452SP TL4G 1/8 3.86 79 178 325 S F2 240/1 CSIR $443.97

102G4550SP TL5G 1/6 5.08 104 229 410 S F2 240/1 CSIR $452.55

103G6660SP FR6G 1/5 6.23 116 293 545 S F2 240/1 CSIR $464.52

103G6680SP FR7.5G 1/4 6.93 140 337 610 S1 F2 240/1 CSIR $517.81

103G6780SP FR8.5G 1/3 7.95 171 384 688 S2 F2 240/1 CSIR $523.01

103G6880SP FR10G 1/3 9.05 189 414 759 S2 F2 240/1 CSIR $545.21

104G8000SP SC10G 1/3 10.29 - 485 909 F2 F2 240/1 CSIR $663.46

103G6980SP FR11G 1/3 11.15 235 505 934 F2 F2 240/1 CSIR $557.61

104G8240SP SC12G 3/8 12.87 247 627 1137 O/F1 F2 240/1 CSIR $720.58

104G8520SP SC15G 3/8 15.28 314 743 1316 O/F1 F2 240/1 CSIR $752.75

104G8820SP SC18G 1/2 17.69 393 876 1592 O/F1 F2 240/1 CSIR $745.67

104G8140SP SC21G 5/8 20.95 457 1019 1856 F3 F2 240/1 CSIR $981.27

R134a LBP Compressors

102G4501SP TL5F 1/6 5.08 112 - - S - 240/1 CSIR $447.73

105G6606SP NL6F 1/5 6.13 152 - - S - 240/1 CSIR $462.37

105G6706SP NL7F 1/4 7.27 186 - - S - 240/1 CSIR $484.67

105G6900SP NL11F 1/3 11.15 275 - - O/F1 - 240/1 CSIR $508.53

104G8500SP SC15F 3/8 15.28 321 - - O/F1 - 240/1 CSIR $687.97

104G8800SP SC18F 1/2 17.69 388 - - O/F1 - 240/1 CSIR $723.68

R12 Replacement

103U2154SP FR11B 1/3 11.15 228 486 822 - F2 240/1 CSIR $477.52

104L2670SP SC12B 3/8 12.90 261 593 1034 - F2 240/1 CSIR $621.00

104L2830SP SC15B 3/8 16.30 312 711 1200 - F2 240/1 CSIR $649.42

104L2110SP SC18B 1/2 17.70 380 817 1399 - F2 240/1 CSIR $821.16

104L2310SP SC21B 5/8 20.95 446 952 1589 - F2 240/1 CSIR $1,050.63

DANFOSS HERMETIC COMPRESSORSHERMETIC COMPRESSORS – RECIPROCATING (CONT'D)

DANFOSS HERMETIC COMPRESSORS



S1: R

efrig

erat

ion

Eq

uipm

ent

Part NumberModel

NumberNom HP

Disp cc/rev

Capacity (W) Compressor Cooling

Electrical

List Price

Low Med High

VoltageMotor Type-23.3 -6.7 7.2 LBP HBP

12V/24V DC R134a Compressors (Capacity rated @2000RPM)

101Z0200SP BD35F1/12 nom

2.00 cm3 33 96 151 S - 12/24V DCVariable Speed

$1,130.53

101Z1220SP BD50F1/12 nom

2.50 cm3 42 123 186 S - 12/24V DCVariable Speed

$1,282.08

COMPRESSOR COOLING

S Static cooling normally sufficient

S1 Oil cooling & 1.5 m/s fan cooling required at 43°C ambient

S2 Oil cooling & 1.5 m/s fan cooling required at 38°C & 43°C ambient

O Oil cooling

F1 Fan cooling 1.5 m/s (Compressor compartment temperature equal to ambient temperature)

F2 Fan cooling 3.0 m/s necessary

F3 Not applicable below -25°C evaporating temp. in 43°C ambient temp. above 240V


MANEUROP HERMETIC COMPRESSORS

Part NumberNom HP

Displ. cc/rev

Capacity R404A (W) Electrical Connections Nett Weight

(kg)Height (mm)

List Price-10 -5 0 5 Phase RLA LRA Suct. Disch.

R507/R404A M/HBP Compressors (POE Oil)

MTZ18-4VI 1.5 30.2 1580 2110 2760 3540 3 3.57 16 1/2 3/8 22 333 $1,376.13

MTZ18-5VI 1.5 30.2 1580 2110 2760 3540 1 3.57 16 1/2 3/8 22 333 $1,376.13

MTZ22-4VI 1.8 38.12 2270 2920 3670 4540 3 10.71 41 5/8 3/8 23 333 $1,433.94

MTZ22-5VI 1.8 38.12 2270 2920 3670 4540 1 4.28 16 5/8 3/8 23 333 $1,433.94

MTZ28-4VI 2.3 48.06 2880 3720 4710 5860 3 11.72 55 5/8 3/8 24 358 $1,487.02

MTZ28-5VI 2.3 48.06 2880 3720 4710 5860 1 5.35 23 5/8 3/8 24 358 $1,487.02

MTZ32-4VI 2.7 53.86 3230 4220 5390 6770 3 14.28 70 5/8 1/2 25 358 $1,512.36

MTZ32-5VI 2.7 53.86 3230 4220 5390 6770 1 5.71 25 5/8 1/2 25 358 $1,512.36

MTZ36-4VI 3 60.47 3800 4870 6160 7680 3 14.28 70 5/8 1/2 25 358 $1,558.18

MTZ36-5VI 3 60.47 3800 4870 6160 7680 1 6.43 30 5/8 1/2 25 358 $1,558.18

MTZ40-4VI 3.3 67.89 4280 5490 6900 8540 3 7.14 38 5/8 1/2 26 358 $1,644.70

MTZ44-4VI 3.8 76.22 4420 5840 7570 9660 3 6.78 48.5 7/8* 3/5 36 415 $1,696.49

MTZ50-4VI 4.2 85.64 5290 6920 8910 11300 3 8.21 48.5 7/8* 3/5 37 415 $1,763.35

MTZ56-4VI 4.8 96.13 6060 7880 10020 12520 3 8.57 64 7/8* 3/5 37 415 $1,888.34

MTZ64-4VI 5.4 107.71 7080 9130 11540 14340 3 10 64 7/8* 3/5 37 415 $1,997.13

MTZ72-4VI 6.1 120.94 7960 10230 12900 16010 3 12.14 80 7/8* 3/5 39 415 $2,084.54

MTZ80-4VI 6.8 135.78 9160 11720 14680 18090 3 13.56 80 1-1/9 3/5 42 415 $2,448.41

MTZ100-4VI 8.3 171.26 10390 13500 17220 21620 3 15.71 78 1-1/8 3/4 66 520 $3,289.32

MTZ125-4VI 10.4 215.44 13650 17500 22060 27420 3 19.28 105 1-1/8 3/4 68 520 $4,116.29

MTZ144-4VI 12 241.87 15740 20120 25310 31400 3 21.42 115 1-1/8 3/4 69 540 $4,467.81

MTZ160-4VI 13.3 271.55 17690 22520 28220 34900 3 25.7 130 1-1/8 3/4 69 540 $4,887.60

Note: Rating Conditions: 50°C Condensing, 11.1K Suction Super Heat, 8K Liquid Subcooling. Crankcase Heaters extra (BD00055 suits all MT/MTZ & LTZ compressors). Start Kit (BD00075) for LT, MT, LTZ, MTZ18-28, Start Kit (BD00080) for LT, MT, LTZ, MTZ32-36. All compressors fitted with sightglass and oil equaliser as standard. * Adapter (LP00986) required.

Application of HFC refrigerant alternatives should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

MAKING MODERN LIVING POSSIBLE



S1: R

efrig

erat

ion

Eq

uipm

ent

Part NumberNom HP

Displ. cc/rev

Capacity R404A (W) Electrical ConnectionsOil

Charge (ltr)

Nett Weight

(kg)Height (mm)

List Price-40 -35 -30 -25 -20 Phase RLA LRA Suct. Disch.

R507/R404A LBP Compressors (POE Oil)

NTZ048-5LR1 1.8 48.06 370 550 810 1140 1560 3 4.28 16 5/8 1/2 0.95 21 333 $2,294.27

NTZ068-4LR1 2.3 67.89 550 850 1230 1710 2310 3 5.35 23 5/8 1/2 0.95 23 333 $2,490.55

NTZ096-4LR1 3.3 96.13 910 1310 1870 2600 3550 3 6.42 42 7/8* 3/4 1.8 35 413 $2,588.59

NTZ108-4LR1 3.8 107.71 910 1410 2070 2950 4050 3 6.78 42 7/8* 3/4 1.8 35 413 $2,725.41

NTZ136-4LR1 4 135.78 1330 1990 2850 3920 5250 3 8.57 40 1-1/8 3/4 1.8 35 413 $3,228.24

NTZ215-4LR1 7.3 215.44 1650 2670 4030 5770 7970 3 15.71 78.5 1-1/8 3/4 3.9 62 519 $5,190.13

NTZ271-4LR1 8.3 271.55 2340 3710 5450 7650 10340 3 19.28 105 1-1/8 3/4 3.9 64 519 $5,922.46

Rating Conditions: 50°C Condensing, 11.1K Suction Super Heat, 8K Liquid Subcooling. LBP Compressor NTZ replacement for LTZ models. Crankcase Heaters extra (7773001) suits all MT/MTZ & LT/NTZ compressors. Start Kit (77701022) for LT/MT, LTZ, NTZ048 & 068, MTZ18-28, Start Kit (77701023) for LT/MT, LTZ, NTZ096,MTZ32-36. All compressors fitted with sightglass and oil equaliser as standard. * Adapter (J00986) required.

Valve Part Number 24639-P 2600-081620 2600-102022 2605-122030 2605-142030 2600-142030-1LC 2600-182030-1LC

Crank Case Heater/

Compressor

Valve Size 3/8"ID x 1"RL 1/2"ID x 1"RL5/8"ID x 1-1/4"RL

3/4"ID x 1-1/4"RL

7/8"ID x 1-1/4"RL

7/8"ID x 1-3/4"RL

1-1/8"ID x 1-3/4"RL

Part NumberCompressor Model Connection Connection Connection Connection Connection Connection ConnectionMTZ18 Discharge Suction - - - - -

120Z0459

MTZ22 Discharge Suction - - - - -

MTZ28 Discharge Suction - - - - -

MTZ32 - Discharge Suction - - - -

MT36 - Discharge Suction - - - -

MTZ40 - Discharge Suction - - - -

MTZ44 / 45 - - - Discharge - Suction -





MTZ80 / 81 - - - Discharge - - Suction

MTZ100 - - - - Discharge - Suction




NTZ048 - Discharge Suction - - - -

NTZ068 - Discharge Suction - - - -

NTZ096 - - - Discharge - Suction -

NTZ108 - - - Discharge - Suction -

NTZ136 - - - Discharge - - Suction






ent

HERMETIC COMPRESSORS – SPARE PARTS

Part Number Description List Price

Kirby / Tecumseh Spares

KCC101-2 KIT SERVICE AG TUBES TO R/LOCK $349.33

KME680-4 RELAY (ME814-11 KIRBY) $94.69




KME682-1 RELAY (ME848-2, ME997-2 KIRBY) $85.45

RPC6361 RELAY SUIT AKM19ES $74.32

RVA3G6D POTENTIAL RELAY (ELECTRICAL) $72.59

RVA3H6D RELAY POT. S/SEDES 820ARR3B29 $174.32

RVA4N3C RELAY SUIT AKM22YS/AKM26YS $93.27

RVA6AM6D RELAY POTENTIAL ELECTRICAL $93.29

RVA6M6D RELAY POTENTIAL $93.27

RVA8R3C RELAY SUIT AKM22ES/AKM26ES $174.32

RVA8R6D RELAY SUIT AE16LZ, AE18LZ/MG $174.32

KME660-1 THERMO ASSY - MOTOR PROTECTOR $84.01







KME671-2 OVERLOAD $66.05

T88332-54 OVERLOAD (SUIT AKL19ZS) $42.53

T97194-54 OVERLOAD (SUIT AKM19YS) $42.53

K31-9 HEATER CRANKCASE 50/415/AG $221.72

KME664-15 MOTOR PROTECTOR WJ COMPRESSOR $34.14



KME664-3 MOTOR PROTECTOR COMPRESSOR $80.83

64-77MFD330V-S CAPACITOR START $122.32

92A040B330AD2X CAPACITOR START 40-48MFD/330R $28.35

92A060B330BD4X CAPACITOR START 60-72MFD/330R $34.55

92A120B330CE7X CAPACITOR START120-144MFD/33OR $57.53

Danfoss / Maneurop Spares

103N0002 DANFOSS COMP START DEVICE LST $69.80

103N0011 DANFOSS COMP START DEVICE LST $79.98

117U6003 START RELAY - DANFOSS HST $63.00

117U6011 RELAY SC12D SC18B FR8.5A 115V $63.00

7701022 START KIT LT/MT/LTZ/MTZ18-28 $379.71

120Z0459 CCH PTC HEATER 27W $221.68

Capacitors & Other Miscellaneous Compressors & Spares

RUN440-15 15MFD X 440V RUN CAPACITOR $53.52

25MFD-440V RE 25MFD X 440V RUN CAPACITOR $63.16

CH-102 WAGNER CRANKCASE HEATER $201.43




S1: R

efrig

erat

ion

Eq

uipm

ent

Part Number Description

36-43MFD-240V RE START CAP 36-43 MFD 240V $38.41

40-48MFD-240V RE START CAP 43-52MFD 240V $43.65






ST250-108-130 RE START CAP 108-130MFD 240V $52.11

ST250-145-175 RE START CAP 145-175MFD 240V $60.59


1.5MFD-440V 1.5MFDx440V RUN/CAP + ST & LEAD $24.97












AM7A020F5T CAP RUN 2UF 500V P2 30DIAX63LG $20.39

AI7A040F5T CAP RUN 4UF 450V P2 30X30 $29.54

AI7A080L6T CAP RUN 8UF 450V P2 35X73 $34.91

AI7A120N6T CAP RUN 12UF 450V P2 40X73 $44.44



AI7A250P7T CAP RUN 25UF 450V P2 45X98 $59.37




AI7A450R9T CAP RUN 45UF 450V P2 50X123 $89.30



AI7A600V9T CAP RUN 60UF 450V P2 60X123 $132.00

KWA099-3 BOX (PLASTIC) ELECTRICAL $62.27

HERMETIC COMPRESSORS – SPARE PARTS (CONT'D)



ent

HERMETIC COMPRESSORS – SCROLL

COPELAND COMPRESSORS - REFRIGERATION

Part NumberNom HP

Displ. cc/rev

Nominal Capacity: R404A Watts Evaporating Temperature: °C

Nom Current FLA / PH

Weight (Kgs)

List Price-40 -35 -25 -15 -5 0 5

R404A L/M/HBP Compressors 415 V / 3 Phase (POE Oil)

ZF08K4ETFD550-C 2.5 41.9 1100 1433 2100 3150 4200 5040 5947 4.6 29 $3,660.74

ZF09K4ETFD550-C 3.0 46.4 1200 1500 2300 3300 4700 5600 6600 5.4 30 $3,747.40

ZF11K4ETFD550-C 3.5 57.5 1500 1800 2800 4100 5800 7000 8300 6.4 31 $3,914.26

ZF13K4ETFD551-C 4.0 67.8 1700 2100 3200 4800 6900 8200 9700 4.6 39 $4,326.00

ZF15K4ETFD551-C 5.0 83.3 2100 2600 3900 5800 8300 10000 11800 5.7 43 $4,120.00

ZF18K4ETFD551-C 6.0 98.8 250 3100 4800 6900 10000 12000 14200 8.0 43 $4,841.00

ZF24K4ETWD551-C 7.5 126.0 3060 3800 580 8500 12300 14700 17400 12.2 100 $6,800.32

ZF33K4ETWD551-C 10.0 166.0 4350 5300 8200 12200 17500 20800 24500 17.0 102 $7,553.39

ZF40K4ETWD551-C 13.0 204.0 5200 6400 10000 14800 21300 25500 30100 18.4 108 $8,719.48

ZF48K4ETWD551-C 15.0 244.0 6000 7400 11400 16900 24500 29300 34600 22.5 113 $9,300.43

COPELAND COMPRESSORS - AIR CONDITIONING

Part NumberR22 Rating Point 7.2 Nominal HP

Displ. cc/rev

Nom Current FLA / Phase Weight (Kg) List Price

HBP COMPRESSOR – Single Phase (POE Oil)

ZR22K3EPFJ522-C 5240 1.83 30.7 9.6 26.0 $1,062.50

ZR28K3EPFJ522-C 6970 2.33 39.2 12.9 27.3 $1,224.35

ZR34K3EPFJ522-C 8260 2.83 46.1 13.6 29.5 $1,317.05

ZR36K3EPFJ522-C 8850 3.00 49.5 16.4 29.5 $1,341.73

ZR42K3EPFJ522-C 10140 3.50 56.8 17.1 30.0 $1,510.34

ZR47K3EPFJ522-C 11500 3.90 64.1 19.3 32.6 $1,296.53

HBP COMPRESSOR - 415V / 3 PHASE (POE OIL)

ZR28K3ETFD522-C 6970 2.33 39.2 5.0 26 $1,406.20

ZR36K3ETFD522-C 8850 3.00 49.5 5.7 29.5 $1,325.25

ZR40K3ETFD522-C 9260 3.33 51.2 6.4 32.0 $1,444.96

ZR47KCETFD522-C 11400 3.90 63.2 7.2 32.6 $1,750.85

ZR48KCETFD522-C 11500 4.10 67.2 7.5 38 $1,790.79

ZR54KCETFD522-C 13000 4.50 73.2 8.2 35.5 $1,944.33

ZR57KCETFD522-C 13660 4.75 76 8.2 36.0 $1,874.96

ZR61KCETFD522-C 14700 5.00 82.4 10.0 35.9 $1,956.68

ZR68KCETFD522-C 16500 5.75 93 10.0 38.2 $2,023.06

ZR72KCETFD522-C 17800 6.00 98 10.0 38.2 $2,080.81

ZR81KCETFD522-C 19800 6.75 110.6 12.0 40 $2,204.32

ZR94KCETFD522-C 23000 8.00 127.2 16.2 59 $3,362.18

ZR94KCETFD523-C 23200 8.00 127.2 16.2 58.2 $3,362.18

ZR108KCETFD522C 26670 9.00 147.5 17.3 64 $3,419.24

ZR108KCETFD523C 26670 9.00 147.5 17.3 64 $3,560.70

ZR125KCETFD522C 30660 10.00 171.4 19.2 64 $3,431.85

ZR125KCETFD523C 31000 10.00 165.6 19.2 62.7 $3,713.39

ZR144KCETFD522C 34700 12.00 191.7 19.6 62.7 $4,068.14

ZR144KCETFD523C 34700 12.00 191.7 19.6 62.7 $4,115.40

ZR160KCETFD523C 37700 13.00 204.3 17.3 103 $5,507.28

ZR190KCETFD523C 45900 15.00 241.9 23.8 119 $6,045.99



S1: R

efrig

erat

ion

Eq

uipm

entValve

Part Number 2600-101620 2605-122030 2605-142030 2605-182835 2605-222835Crank Case

Heater/Valve Size 5/8"ID x 1" RL 3/4"ID x 1-1/4" RL 7/8"ID x 1-1/4"RL 1-1/8"ID x 1-3/4"RL 1-3/8"ID x 1-3/4"RL

Part NumberCompressor Model Connection Connection Connection Connection Connection

ZR61KCETFD523-C Discharge - Suction - -

018-0095-00ZR68KCETFD523-C Discharge - Suction - -

ZR72KCETFD523-C Discharge - Suction - -

ZR81KCETFD523-C - Discharge Suction - -

ZR94KCETFD523-C - Discharge - Suction -

018-0091-01

ZR108KCETFD523C - Discharge - Suction -

ZR125KCETFD523C - Discharge - Suction -

ZR144KCETFD523C - - Discharge - Suction



STANDARD CONDITIONS

ApplicationAmbient Temp °C

Condensing Temp °C



Nom. Capacity & Power Input W @

SST °C Standard

Air Conditioning 35 55 47 35 7.2 ARI

IMPORTANT - WARNING TO BE CLEARLY UNDERSTOOD PRIOR TO RUNNING ANY SCROLL COMPRESSOR

• It is important that the SCROLL compressor is charged as quickly as possible by way of LIQUID REFRIGERANT INTO THE LIQUID LINE, this is to avoid insufficient volume of suction gas that would be detrimental to the compressor.

• DO NOT VAPOUR CHARGE THE SYSTEM!!

• It is recommended the required refrigerant charge is bomb charged into the liquid side of the system.

• Topping up the system can be done carefully on the low side with liquid refrigerant through manifold service gauges.

• The suction service valve must NOT BE FULLY CLOSED at any time when the compressor is running.


COPELAND SPARES


018-0091-01 HEATER C/CASE FOR SUMMIT $72.17

MANEUROP SCROLL COMPRESSORS

Part NumberNom HP

Displ. cm3/rev

Nominal Capacity: R404A Watts Evaporating Temperature: °C

Nom Current

FLAHeight /

KgList

Price-20 -15 -10 -5 0 5 10

Maneurop M/HBP (415V / 3 Phase) Compressors (Mineral Oil)

SM090-4VI 7.5 120.5 7680 9930 12580 15660 19220 23280 27900 17/ MCC 500 / 72 $3,473.08

SM100-4VI 8.5 127.2 8340 10670 13400 16580 20270 24520 29380 19/ MCC 500 / 72 $3,473.08

SZ100-4VI (POE) 8.5 $3,844.63

SM110-4VI 9 144.2 9570 12190 15280 18910 23140 28030 33620 20/ MCC 550 / 80 $3,532.28

SM120-4BI 9 155 10440 13180 16430 20280 24770 30000 36010 25/ MCC 550 / 80 $3,640.78

SM115-4RI 10 166.6 10780 13750 17260 21380 26190 31750 38150 29/ MCC 570 / 80 $3,532.28

SM125-4RI 10 166.6 11210 14150 17660 21800 26650 32280 38760 25/ MMT 570 / 80 $3,640.78

SM160-4RI 13 216.6 14440 18250 22800 28190 34500 41840 50300 35/ MMT 630 / 94 $5,279.88

SM185-4RI 15 249.9 16600 20960 26190 32400 39720 48260 58160 35/ MMT 680 / 103 $5,797.87

Note: All Compressors are supplied with: Sight Glass, 3/8" Flare Oil Equalization Connection, Rotolock Valve Connections - Refer Catalogue for sizes. MMC: Maximum Continuous Current MMT: Maximum Must Trip Current



ent

Part Number Nominal HPDispl.

cm3/rev

R22 Rating Point (@ 55°C SST)

7.2 °C SSTNominal Current

FLA / Phase Height / Kg

Maneurop R22 M/HBP (415V / 3 Phase) Compressors (Mineral Oil)

SM090-4VI 7.5 120.5 21800 17/ MCC 500 / 72

SM100-4VI 8.4 127.2 23150 19/ MCC 500 / 72

SZ100-4VI (POE) 8.5 127.2 23150 19/ MCC 500 / 72

SM110-4VI 9.2 144.2 25950 20/ MCC 550 / 80

SM120-4BI 10 155 30110 25/ MCC 550 / 80

SM120-4RI 10 155 30110 25/ MCC 550 / 80

SM115-4RI 9.6 166.6 28000 29/ MCC 570 / 80

SM125-4RI 10.4 166.6 30100 25/ MMT 570 / 80

SM160-4RI 13.3 216.6 39100 35/ MMT 630 / 94

SM175-4RI 13.3 233 42000 35/ MMT 680 / 103

SM185-4RI 16.6 249.9 45500 35/ MMT 680 / 103

Valve Part Number 2605-142030 2605-142030 2605-182835 2600-263650 Crank Case Heater/

Valve Size 7/8"ID x 1-1/4" RL 7/8"ID x 1-1/4"RL 1-1/8"ID x 1-3/4"RL 1-5/8"ID x 2-1/4"RL

Part NumberCompressor Model Connection Connection Connection ConnectionSM115-4VI **Discharge (3/4") - Suction -

7773108SM175-4VI - Discharge - Suction*

SM185-4VI - Discharge - Suction*

* Note: 1-5/8"OD X 1-3/8"ID Copper reducer required #1004-2622 **7/8"OD X 3/4"ID Copper reducer required #1004-1412

COPELAND SCROLL COMPRESSORS - HVAC

R410A COMPRESSORS FOR AIR CONDITIONING APPLICATIONS

Part Number

Electrical (V-PH-Hz)

Displ.m3/hr

Con. Conn. Size AMPS Weight (kgs)

List PriceSuction DischargeRated Load

AmpsLocked Rotor

AmpsType.

R410A Compressors for Air Conditioning Applications (415V / 3 Phase)

ZP24KSETFM522-C 415-3-50 5.7

Stub Tube

7/8" 1/2"

6.6 43 29 $1,344.15

ZP34KSETFM522-C 415-3-50 5.9 6.6 46 33 $1,606.05

ZP51KSETFM522-C 415-3-50 8.3 8.6 51.5 33 $1,863.01

ZP54KSETFM522-C 415-3-50 8.9 8.6 51.5 33 $1,877.76

ZP61KCETFM522-C 415-3-50 10.1 10.9 64 40 $2,103.75

ZP67KCETFM522-C 415-3-50 11 11.8 74 40 $2,195.24

Note: 522 build type is interchangeable with -593 Additional models are available - refer to your Heatcraft Branch

Application HFC refrigerant alternatives should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

MANEUROP COMPRESSORS (CONT'D)


S1: R

efrig

erat

ion

Eq

uipm

entCOPELAND COMPRESSORS - REFRIGERATION

R404A/R134a - MEDIUM TEMP (3PH/415V) ZB SCROLL COMPRESSORS

Model Nom HP Phase

Amps Watts @ -5oSST Connections

Net kgPrice $

excl. GSTMRA R404A R134A Disch Suct

R404A/R134a - Medium Temp (3PH/415V) ZB Scroll Compressors

ZB15KQE-TFD-551 2.0 3 4.9 3880 2580 1/2 3/4 25 $2,440.02

ZB19KQE-TFD-551 2.5 3 6.5 4930 2970 1/2 3/4 27 P.O.A.

ZB21KQE-TFD-551 3.0 3 7.2 5960 3750 1/2 3/4 28 $2,505.73

ZB26KQE-TFD-551 3.5 3 8.9 6910 4330 1/2 3/4 28 P.O.A.

ZB30KQE-TFD-551 4.0 3 10.3 8140 5080 1/2 7/8 35 P.O.A.

ZB38KQE-TFD-551 5.0 3 12.8 10100 6340 1/2 7/8 37 $3,056.16

ZB45KQE-TFD-551 6.0 3 13.1 11900 7530 1/2 7/8 40 $3,598.41

ZB50KQE-TFD-551 7.5 3 14.6 14200 8620 7/8 1-1/8 57 P.O.A.

ZB58KQE-TFD-551 8.0 3 15.4 15850 9660 7/8 1-1/8 57 P.O.A.

ZB66KQE-TFD-551 9.0 3 17.5 17850 11050 7/8 1-3/8 60 P.O.A.

ZB76KQE-TFD-551 10.0 3 20.4 21200 12600 7/8 1-3/8 61 P.O.A.

ZB88KQE-TFD-551 12.0 3 22.3 23600 14000 7/8 1-3/8 66 P.O.A.

Note: Ratings based on ARI Conditions at 50oC Condensing temp / 11K Suction superheat / 8K Subcooling Above models come with rotolock connections (Sold separately) Suction superheat must be kept to a minimum to prevent scroll compressor protection device from operating


™.

EFFICIENCY

SOUND MODULATION

CORE SENSE MULTI REFRIGERANTS

EFFICIENCY

EFFICIENCY

SOUND MODULATION


EFFICIENCY

EFFICIENCY

SOUND MODULATION


EFFICIENCY EFFICIENCY

SOUND MODULATION


EFFICIENCY



ent

COMPRESSORS – SEMI HERMETIC

COPELAND REED SEMI-HERMETIC COMPRESSORS - R404A / R507

Part NumberNom HP

Displ. m3/hr

**Capacity R404A / R507 *Evaporating Temperature °C Electrical Amps/ph List

Price-35 -30 -25 -20 -15 -10 -5 0 5 RLA* MCC** L.R.A.

R404A / R507 Copeland Reed L/M/HBP Compressors (POE Oil)

DKSJ-15X-EWL 1.5 6.3 690 1000 1360 1790 2300 2900 3650 4500 3.2 3.4 20.4 $3,471.10

DKSL20X-EWL 2 9.1 1060 1500 2030 2650 3400 4250 5300 3.2 4.7 20.4 $3,538.81

DLE-20X-EWL 2 9.9 500 1020 1650 2370 3200 4200 5400 6750 8350 4.6 5.7 37.6 $3,908.14

DLJ-30X-EWL 3 14.5 1300 2030 2900 3950 5200 6650 8350 10350 12650 6.7 8.07 53 $5,129.96

DLL-40X-EWL 4 18.1 1680 2590 3700 5050 6650 8550 10800 13500 16600 7.9 9.5 68.5 $5,598.58

D3SA-75X-AWM 7.5 32.2 5600 7650 10050 12850 16100 19800 24100 28900 10.5 17.9 82 $6,838.10

D3SC-100X-AWM 10 38.0 7150 9500 12250 15500 19300 23800 29000 35000 16.8 21.6 106 $7,131.34

D2SC-65X-EWL 6.5 26.9 5100 6750 8700 10900 13500 16400 19800 23700 12.7 16.2 85.3 $7,885.83

D3SS-100X-AWM 10 49.9 9950 12900 16300 20300 24900 30500 16.3 26 109 $8,405.83

D3SS-150X-AWM 15 49.9 10350 13550 17200 21400 26300 32000 38500 46000 23.2 30.2 125 $8,426.33

D4SF-100X-AWM 10 56.0 11250 14600 18500 23200 28700 35000 16.9 27.1 105 $8,786.34

D4SL-150X-AWM 15 70.8 14700 18900 23900 29700 36500 44000 21.7 35.6 156 $9,575.35

D4SA-200X-AWM 20 56.0 10650* 14250 18400 23200 28800 35000 42500 51000 24.2 30.5 160 $9,811.88

D4ST-200X-AWM 20 84.7 17200 22400 28500 35500 44000 53500 24.2 42.4 175 $10,772.10

D4SH-250X-AWM 25 70.8 13300* 17600 22600 28300 35000 42500 51500 62000 31.1 40.1 192 $11,207.31

D4SJ-300X-AWM 30 84.7 15800* 21200 27400 34500 43000 52500 64000 76500 36.2 47.7 218 $12,375.69

D6SL-250X-AWM 25 106.0 21400 27700 35000 43500 53000 64000 31.4 56.5 199 $13,419.13

D6ST-320X-AWM 32 127.0 25000 32000 40500 50500 62000 75000 39.2 62.9 255 $15,388.92

D6SH-350X-AWM 35 106.0 19600* 26000 33500 42000 52000 63500 76500 92000 49.6 62.4 284 $15,873.06

D6SJ-400X-AWM 40 127.0 23100* 30500 39000 49000 60500 74000 89000 106500 55.2 71.8 347 $17,747.11

D6SU-400X-AWM 40 151.8 29600 38500 49000 61500 75500 92000 47.3 78 304 $17,887.49

D6SK-500X-AWM 50 151.8 27200* 36500 47000 59500 73500 90500 109500 131500 71 94.7 415 $19,575.18

D8SJ-450X-AWM 45 181.0 35500 46500 59000 74000 91000 111000 53.3 90.8 458 $34,913.98

Application of HFC refrigerant alternatives should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36Capacities at 45°C Saturated Condensing Temperature. Can be used with R22, R134a and R407C. *Additional cooling required - Compressor Rated Load Amps at -25°SST R404A and 45°C SCT. Provisional values for comparison purposes only. Use M.C.C. for power supply selection. Maximum Continuous Current (Compressor Manufacturer's data). 3/4/6 & 8 Cylinder Compressors Include Oil Pressure Safety Control (OPS).

Old Model Number Nom HPDispl. m³/hr Streamlined Model** Old Model Number Nom HP

Displ. m³/hr

Streamlined Model**

DKSJ-15X-EWL 1.5 6.3 KSJP-15X-EWL D4SA-200X-AWM 20 56 AMA-22X-AWM

DKSL20X-EWL 2 9.1 KSLP-20X-EWL D4ST-200X-AWM 20 84.7 4MM-20X-AWM

DLE-20X-EWL 2 9.9 LEP-20X-EWL D4SH-250X-AWM 25 70.8 4MH-25X-AWM

DLJ-30X-EWL 3 14.5 LJP-30X-EWL D4SJ-300X-AWM 30 84.7 4MI-30X-AWM

DLL-40X-EWL 4 18.1 LLP-40X-EWL D6SL-250X-AWM 25 106 4MU-25X-AWM

D3SA-75X-AWM 7.5 32.2 3DA5-75X-AWM-D D6ST-320X-AWM 32 127 6MM-30X-AWM

D3SC-100X-AWM 10 38.0 3DC5-100X-AWM-D D6SH-350X-AWM 35 106 4MK-35X-AWM

D2SC-65X-EWL 6.5 26.9 2DL3-75X-AWM/D D6SJ-400X-AWM 40 127 6MI-40X-AWM

D3SS-100X-AWM 10 49.9 3DS5-100X-AWM-D D6SU-400X-AWM 40 151.8 6MU-40X-AWM

D3SS-150X-AWM 15 49.9 3DS5-150X-AWM-D D6SK-500X-AWM 50 151.8 6MJ-45X-AWM

D4SF-100X-AWM 10 56.0 4MF-13X-AWM D8SJ-450X-AWM 45 181 8DT-450X-AMW

D4SL-150X-AWM 15 70.8 4ML-15X-AWM

**New Compressor models are part of Copeland streamline offering and range rationalisation; availability along with capacity, refrig and electrical connections, mounting and application should be verified with a Heatcraft engineer. Refer to Emerson Climate Technologies Copeland Replacement Guidelines Document D5.4.6/1113/E



S1: R

efrig

erat

ion

Eq

uipm

entCOMPRESSORS - SEMI HERMETIC

COPELAND STREAM SEMI-HERMETIC COMPRESSORS

Part NumberNom. HP

Displ. m³/hr

**Capacity Control

*Capacity Watts @ Evaporating Temperature°C

Electrical List Price

R134a R404A / R507 R407F R407C

-10 -5 -25 -5 -25 -5 -10 -5

Stream 4 Cylinder L/M/HBP Compressors (POE Oil)

4MA-22X-AWM 22 61.7 50% 19150 24400 14800 39000 14400 39800 31400 39000

PWS (YY/Y)

DOL(Y)

380-420v

3ph. 50Hz.

$9,888.89

4MAXD-22X-AWM 22 61.7100% Digital 18950 24100 14600 38600 - 39300 31100 38600 P.O.A

4MF-13X-AWM 12 61.7 50% 18450 23500 14300 37700 13900 36600 30300 37700 $8,972.42

4MFD-13X-AWM 12 61.7100% Digital 18250 23300 14100 37300 13750 36300 30000 37300 P.O.A

4MH-25X-AWM 25 71.4 50% 22100 28100 17250 46000 17000 46100 37000 46000 $10,986.74

4MHD-25X-AWM 25 71.4100% Digital 21800 27900 17050 45600 - 45700 36600 45600 P.O.A

4ML-15X-AWM 15 71.4 50% 22300 28300 18000 45600 17350 45400 36900 45600 $9,355.52

4MLD-15X-AWM 15 71.4100% Digital 22100 28000 17750 45100 17150 44900 36500 45100 P.O.A

4MI-30X-AWM 30 78.0 50% 24400 30900 20100 50600 19300 50700 41100 50600 $11,511.99

4MID-30X-AWM 30 78.0100% Digital 24100 30600 19850 50100 - 50100 40700 50100 P.O.A

4MM-20X-AWM 20 78.0 50% 24700 31100 20100 49600 19000 49500 40300 49600 $9,953.86

4MMD-20X-AWM 20 78.0100% Digital 24400 30800 19850 49100 18750 49000 39900 49100 P.O.A

4MJ-33X-AWM 33 87.5 50% 27300 34500 22100 56700 21600 56300 45800 56700 $12,225.39

4MJD-33X-AWM 33 87.5100% Digital 27000 34200 21800 56100 - 55700 45300 56100 P.O.A

4MT-22X-AWM 22 87.5 50% 28100 35300 22500 56500 21500 55000 45800 56500 $10,653.73

4MTD-22X-AWM 22 87.5100% Digital 27800 35000 22300 55900 21300 54400 45300 55900 P.O.A

4MK-35X-AWM 25 99.5 50% 30600 38700 24700 63800 24600 63000 51500 63800 $13,441.03

4MKD-35X-AWM 25 99.5100% Digital 30300 38300 24400 63200 - 62400 50900 63200 P.O.A

4MU-25X-AWM 25 99.5 50% 30900 39200 24800 63100 24100 62000 51000 63100 $11,719.10

4MUD-25X-AWM 25 99.5100% Digital 30600 38800 24500 62500 23800 61300 50500 62500 P.O.A



ent

COPELAND STREAM SEMI-HERMETIC COMPRESSORS (CONT'D)

Part NumberNom. HP

Displ. m³/hr

**Capacity Control

*Capacity Watts @ Evaporating Temperature°C

Electrical List Price

R134a R404A / R507 R407F R407C

-10 -5 -25 -5 -25 -5 -10 -5


3006870 CAPACITY CONTROL STREAM $374.98

3009744 DIGITAL CAPACITY CONT HEAD ASSY STREAM $1,840.00

Stream 6 Cylinder L/M/HBP Compressors (POE Oil)

6MI-40X-AWM 40 120.5 33 / 67% 35900 45700 29900 77000 29100 77400 62100 77000

PWS (YY/Y)

DOL(Y)

380-420v

3ph. 50Hz.

$15,352.47

6MID-40X-AWM 40 120.5 100% Digital 35500 45300 29500 76200 28700 76700 61500 76200 P.O.A

6MU-40X-AWM 40 120.5 33 / 67% 46100 58100 37900 97000 36500 93900 78200 97000 $16,846.98

6MUD-40X-AWM 40 120.5 100% Digital 45600 57500 37400 96000 36100 92900 77300 96000 P.O.A

6MM-30X-AWM 30 120.5 33 / 67% 37300 47000 30100 76500 29500 75100 61700 76500 $13,839.02

6MMD-30X-AWM 30 120.5 100% Digital 36900 46600 29800 75700 29100 74400 61100 75700 P.O.A

6MJ-45X-AWM 45 135.0 33 / 67% 40700 51700 33600 85900 33100 85600 69600 85900 $16,078.06

6MJD-45X-AWM 45 135.0 100% Digital 40400 51200 33200 85000 32700 84700 68900 85000 P.O.A

6MT-35X-AWM 35 135.0 33 / 67% 42100 52900 33800 86200 33400 83700 69600 86200 $15,632.69

6MTD-35X-AWM 35 135.0 100% Digital 41600 52400 33500 85300 33000 82900 68900 85300 P.O.A

6MK-50X-AWM 50 153.0 33 / 67% 43700 56200 37400 96100 37100 96500 77700 96100 $17,847.37

6MKD-50X-AWM 50 153.0 100% Digital 43300 55700 37000 95100 36700 95500 76900 95100 P.O.A

* Capacity Watts @ Evaporating Temperature°C, 45°C SCT, 20K.Suction Superheat & 0K Liquid Subcooling.

For other rating conditions and for information on how this product can be configured on a parallel system please contact your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

All compressors include mounting kit, crank case heater assembly, oil protection & Dynamic compressor protection and sensing devices module.** All 4 cylinder compressors without Digital Control Designation example 4MHD-25X. Include one (1) bank of inactive capacity control head less solenoid valve = 50% capacity. ** All 6 cylinder compressors without Digital Control Designation example 6MJD-25X. Include one (1) bank of inactive capacity control head less Solenoid Valve = 33% capacity. Should 67% capacity control be required an additional head kit is to be ordered with compressor.Capacity Control solenoid valve(s) needs to be ordered separately together with compressor.

Stream 4 Cylinder Stream 6 Cylinder Digital Stream 4 Cylinder

Digital Stream 6 Cylinder

Stream Sound Shell



S1: R

efrig

erat

ion

Eq

uipm

ent

DORIN SEMI HERMETIC COMPRESSORS R404A / R507

Part NumberNom HP

Displ. m3/hr

Capacity Watts R404A/R507 *Evaporating Temperature °C

415/3 (Except ***)Electrical Amps/ph

List Price-35 -25 -15 -5 5 RLA* MCC** L.R.A.

Dorin 2 Cylinder L/M/HBP Compressors (POE Oil)H40CC-S/HTCR-C 0.75 2.89 370 660 1450 1580 2260 1.6 2.4 11.1 $4,610.30 H40CC/HTCR 0.75 2.89 370 660 1450 1580 2260 4.37*** 6.0*** 30*** $3,430.38 H75CC/HTCR 1 3.86 520 900 1450 2170 3120 2.1 2.9 13.8 $3,354.55 H75CC-S/HTCR-C 1 3.86 520 900 1450 2170 3120 6.56*** 9.0*** 44*** $4,635.02 H100CC/HTCR 1 5.3 750 1320 2120 3170 2.7 4.4 20 $3,475.00 H100CC-S/HTCR-C 1 5.3 750 1320 2120 3170 6.83*** 10.0*** 62*** $4,694.61 H150CC/HTCR 1.5 6.75 920 1610 2590 3880 3.1 6 24.4 $3,509.78 H150CC-S/HTCR-C 1.5 6.75 920 1610 2590 3880 7.48*** 13.5*** 69*** $4,721.26 H180CC/HTCR 1.8 7.71 940 1755 2949 4420 6355 3.8 6 24.4 $3,554.43 H200CC/HTCR 2 8.47 1180 2080 3310 4960 7130 4.3 6 24.4 $3,703.45 H220CC/HTCR 2.2 9.88 1370 2430 3860 5770 8290 4.5 6 24.4 $3,807.58 H280CC/HTCR 2.8 12.17 1690 3010 4821 7260 10460 6.2 9.4 43.6 $3,951.60 H300CC/HTCR 3 14.74 1860 3340 5480 8420 12330 6.9 9.4 43.6 $4,497.69 H350CC/HTCR 3.5 15.95 2030 3732 6061 9198 13328 7.3 9.4 43.6 $4,366.69 H380CC/HTCR 3.8 17.53 2320 4200 6790 10270 14840 8.1 9.4 43.6 $4,626.74 H403CC/HTCR 4 19.99 4261 7365 11385 16943 8.5 13.5 63.1 $5,434.99 H503CC/HTCR 5 22.83 3010 5570 9120 13920 20270 11.1 17.5 86 $6,404.52

Dorin 4 Cylinder L/M/HBP CompressorsH551CC 5.5 23.13 3230 5830 9460 14440 21060 10.33 12.70 63 $7,404.41 H551CS 5.5 27.33 3860 6810 10840 16220 11.20 12.28 63 $7,404.41 H701CC 7 27.33 3880 6880 11000 16570 23900 12.72 15.45 86 $7,479.28 H701CS 7 31.88 4590 8120 12990 19520 13.70 13.29 63 $7,479.37 H751CC 7.5 31.88 4590 8120 12990 19520 28040 14.52 17.88 86 $7,622.34 H751CS 7.5 38.06 5540 9660 15340 22990 17.15 18.96 86 $7,622.38 H1001CC 10 42.81 6360 11330 18230 27560 39870 19.34 23.54 135 $8,466.71 H1001CS 10 48.82 7580 13290 21170 31730 21.53 23.57 109 $8,605.37 H1501CC 15 48.82 7460 13110 20940 31540 45520 24.68 29.53 171 $8,886.71 H1501CS 15 56.87 8750 15430 24360 36420 25.29 27.95 135 $9,825.21 H1601CS 16 63.76 9700 17020 27050 40450 30.60 32.78 171 $10,995.68 H2001CC 20 56.87 8760 15360 24390 36540 52520 26.52 32.74 177 $10,249.49 H2000CS 20 76 11630 19990 31460 46950 - 24.0 38 177 $10,681.47 H2201CC 22 63.76 9730 17110 27200 40790 58660 31.8 37.34 203 $11,236.93 H2500CC 25 76 10900 19450 30960 46470 67010 33.6 48 203 $11,694.11 H2500CS 25 85 13170 22590 35370 52520 - 37.7 45 203 $11,269.43 H3000CC 30 85 12470 22130 35070 52470 75480 36.9 56 224 $11,984.72

COMPRESSORS - SEMI HERMETIC



S1: R

efrig

erat

ion

Eq

uipm

ent

OPEN DRIVE COMPRESSORS

DORIN COMPRESSORS


1HVS COMPRESSOR (DORIN) BELT DRIVE $3,368.78

2GVS COMPRESSOR (DORIN) $3,525.48

3LVS COMPRESSOR (DORIN) $4,799.11

41VS-M COMPRESSOR (DORIN) (B/DRIVE) POLYOL OIL $7,647.46

51VS-M COMPRESSOR (DORIN) BELT DRIVEN $11,076.68

DORIN SEMI HERMETIC COMPRESSORS R404A / R507 (CONT'D)

Dorin 6 & 8 Cylinder CompressorsH3000CS 30 114 17250 29800 46960 70140 - 36.6 56 224 $12,635.22 H3500CC 35 114 16340 29110 46350 69640 100540 36 60 260 $13,563.86 H3500CS 35 128 19090 33020 52000 77540 - 36.6 56 224 $14,427.00 H4000CC 40 128 18860 33260 52550 78470 112770 43.2 72 290 $14,225.33 H4500CS 45 154 22170 39030 62150 93370 - 43.2 84 322 $13,915.30 H5000CC 50 154 23140 40060 62870 93630 134400 55.8 93 358 $15,407.77 H6000CC 60 184 22300 46810 76090 113410 162050 72 120 455 $22,495.20

Application of R407F and other HFC refrigerant alternatives should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36 For other rating conditions and for information on how this product can be configured on a parallel system please contact

your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

* = Compressor Rated Load Amps at -5°SST R404A and 45°C SCT. Values for comparison purposes only.

** = Maximum Operating Current (MOC) = Motor Operating Envelope / Dorin Compressor -Manufacture Design Data -Serial Plate Details.

>> Maximum Continuous Current (MCC) = Activation Point Of Motor Overlaod Protection Device / Dorin Compressor -Manufacture Design Data -Serial Plate Details.

*** = Single Phase Models Include Start Capacitor & Relay.

Semi Hermetic Compressor Configuration Notes:• 4 & 6 Cylinder Compressors Have 1 x Inactive Capacity Control Head - All 8 Cylinder Compressors Have 2 x Inactive Capacity Control Heads.

• 6 Cylinder Compressors Can Be Ordered With 2 x Inactive Heads - 8 Cylinder Compressors Can Be Ordered To Include 3 x Inactive Capacity Control Heads.

• All Compressors Are Pre-Charged with P.O.E. Oil, Suction & Discharge Service Valves, Crankcase Heater,Thermal Motor Protection Module PTC-INT69 (All 4Cyl.) & Mounting Feet Kit.

• 6 & 8 Cylinder Compressors Include CPM Electronic Module.

• Compressors up to H380CC include Thermik Motor Protection as standard.

• Compressors H2001CS upto H6000CC iclude a safety oil differential switch (ODPS) for all other models below H2001CS it is recommended to use a Oil watch Control - Level Alarm function.

• ECOPREMIUM Dorin Compressor Designed for R134a Application Now Available - Range: 5 -30HP - Contact Heatcraft for further information.

OPEN DRIVE SPARES

1TCC004 SEAL KIT DORIN 3VT $545.96

1TCC024 SEAL KIT DORIN 4VS/41VS $801.32

7055283 SEAL SHAFT HCFC 4CC/6CC $2,078.64

MAKING MODERN LIVING POSSIBLE

25%Savings on the energy bill

Can be obtained using a VLT® Refrigeration Drive FC 103 to control refrigeration compressors.

VLT® Refrigeration Drive FC 103

All the refrigeration power you needAt a fraction of the costAvailable as a fi tted option on Kirby Commander and Titan Condensing Units, or as a retrofi t VSD from your local Heatcraft branch.

www.danfoss.com/drives



S1: R

efrig

erat

ion

Eq

uipm

entSCREW COMPRESSORS

HANBELL SCREW COMPRESSORS

With its small footprint, the Hanbell Screw Compressor provides an efficient means of compressing refrigerant in larger applications. The RC2 model has a wide operating envelope, designed to cover low, medium and high temperature applications using R134a and other refrigerants. With very few moving parts, the Hanbell Screw Compressor offers excellent reliability and is a quieter than other alternatives.

A highly efficient motor allows optimum output, no matter what running capacity the compressor is set at. This results in a high displacement of refrigerant, energy efficiency and lower running costs. Hanbell uses long life bearings for higher levels of reliability.

ROTARY AIR CONDITIONING COMPRESSORS

THACOM 240V / 1PH R22 (OIL=32SAM)

Part Number Description Series Type List Price

RM5485GNE81 COMP. ROTARY (THACOM) 0.83HP A $893.48

RM5510GNE9 COMP. ROTARY (THACOM) 1.1HP A $913.40

RM5512GNE81 COMP. ROTARY (THACOM) 1.2HP C $974.86

RM5515GNE81 COMP. ROTARY (THACOM) 1.5HP C $1,018.04

RM5518GNE81 COMP. ROTARY (THACOM) 1.9HP C $1,149.23

RM5524GNHE81 COMP. ROTARY (THACOM) 2.4HP D $1,311.98



RM5526GTHE9 COMP. ROTARY (THACOM) 2.5HP D $1,436.87 Series Type D offer liquid injection capability.

Thacom RM Rotary Series

ø150

20˚

ø21

90(92.1)

ø150

75˚

20˚

ø21

91.4(105.4)

87.5

ø176

60˚

ø25

100.8(117)

ø176

78˚

97.5

ø25

103.5(117)

Type A Type B Type C Type D


RC2-100 Screw Comp 983 with 3 step capacity control P.O.A.







Note - All compressors come with choice of 2 motor sizes and choice of 4 VI Ratio's All RC2 screws can be inverter driven to 65Hz and special models are available. Hanbell offer RC2 models from 19HP through to 445HP. Hanbell also offer ranges of Low Temp, Centrifugal and Ammonia Compressors.

Heatcraft can configure a locally manufactured Screw Set to your requirements complete with switchboard, control and pre-wiring Selections and application should be verified with your Heatcraft Technical Specialist (1800 132 350).

Refer to advertisement on page 36

HEATCRAFT TECHNICAL EXCELLENCE CENTRETH

1800 132 350Monday to Friday 6am - 7pm

Do you have a customer enquiry that requires extra technical advice? Do you have a project that needs quoting? Do you need a second opinion on options to provide your customer? Do you need a replacement compressor for a discontinued model? Are you looking for advice on R22 replacements?Are you looking for the optimal energy solution and a payback?

The Heatcraft Technical Excellence Centre can assist.FAST technical support & quoting to meet your needs. Our experienced engineers are reducing response times to keep you working efficiently.

NEW

YOUR QUICK SELECTION GUIDE FOR R22 RETROFIT REFRIGERANTS

HFC Application Installation Type

R438A ISCEON® (MO99™)

Refrigeration Air Conditioning

• Small systems (retrofit at service).

• Direct Expansion (DX) systems in residential and commercial air conditioning.

• Direct expansion chillers.

• Medium and low temperature refrigeration.

• Not recommended for use in centrifugal compressor systems or for chillers with flooded evaporators.

R407C Air Conditioning(Med-High temp)

• Small systems (with compressor change).

• Large systems (planned retrofit).

• Positive displacement equipment: new or existing residential and commercial air-conditioners.

R407F Refrigeration(Low-Med temp)

• Small systems (with compressor change).

• Large systems (planned retrofit). Supermarket freezer cases,

• Display cases, coolers, transport refrigeration, ice machines.



S1: R

efrig

erat

ion

Eq

uipm

ent

Part Number

Capacity (Watts) Saturated Suction Temperature (SST) °C

H/P Phase RLADispl (cc)

Receiver Vol. (litres) "B"

ModelsList

Price-40 -35 -30 -25 -20 -15 -10R404A / R507 - Low Temperature ApplicationBA8MGB1 135 190 250 315 385 460 545 1/4 1 2.6 2.6 1.4 $870.16

BA12LMYB2 210 285 365 455 555 665 1/3 1 2.8 12.1 1.4 $906.50

BA14LMYB2 250 340 435 545 665 800 1/3 1 4 14.1 1.4 $979.12

BA16LMYB2 290 385 495 615 755 910 3/8 1 2.8 16.2 1.4 $1,082.25

BA18LZB2 330 470 630 810 1010 1230 1450 1/2 1 3.5 18 2.4 $1,303.07

KN014MH1-1 320 480 665 870 1100 1350 1630 3/4 1 3.3 21.5 2.4 $1,671.83

KN017MH1-1 415 600 830 1090 1380 1690 2020 7/8 1 4.8 26.8 2.4 $1,783.26

KN014L1-1 505 740 1020 1330 1660 2020 2390 1 1 5.5 30.5 2.4 $2,015.89

KN022MH1-1 510 795 1090 1400 1740 2120 2550 1 1 5.5 30.5 2.4 $2,381.52

KN023MH1-1 515 795 1090 1400 1740 2110 2510 1 1 4.6 39.6 2.4 $2,467.30

KN015L1-1 505 785 1070 1370 1680 1990 2310 1 1 4.7 39.6 2.4 $2,134.35

KN029MH1-1 750 1090 1460 1860 2300 2810 1-1/4 1 5.8 43.1 4.4 $3,079.31

KN024L1-1 865 1260 1690 2180 2740 3390 1-1/2 1 7.8 53.5 4.4 $3,245.05

* Unit ratings at 35°C ambient temperature Note - some models are available without receiver - check with your local branch

Part Number



Receiver Vol. (litres) 'B' Models

List Price-20 -15 -10 -5 0 5 10

R404A / R507 - Medium / High Temperature Application (Âpplication of refrigerant alternatives TBC w/ Heatcraft Representative)

BA6MHGB1 220 280 350 425 515 600 695 1/4 1 2.8 5.51 1.4 $858.86BA8MGB1 385 460 545 635 730 835 1/4 1 2.8 7.55 1.4 $870.16BA9MGB1 445 520 630 760 900 1030 1/3 1 3.2 8.88 1.4 $933.69

BA12MGB2 555 680 845 1020 1210 1390 3/8 1 2.8 12.1 1.4 $1,009.99

BA14MGB2 630 780 950 1150 1360 1560 1/2 1 3.4 14.1 1.4 $1,195.53

Condensing Units & Packaged Systems

INDOOR HERMETIC CONDENSING UNITS

KIRBY NULLARBOR CONDENSING UNIT

Developed for harsh Aussie conditions, our Nullarbor Hi-Ambient condensing units are rated for operation up to 45°C ambient. With improved performance due to the inclusion of larger condensers, the Kirby Nullarbor range delivers higher output and greater efficiency. Because they're from Kirby, they're robust and reliable - guaranteed.

Reliability

• Use of the latest Kirby BA series along with the proven AE, WJ, and AW Kirby compressors.

• Condensers have been selected to provide reliable system operation at 45°C ambient.

Improved Efficiency• Increased condenser capacity allows the compressor

to run at lower discharge temperatures and higher COP.

Reduced Noise Levels • BA series benefit from improved housing and mechanical

enhancements that measurably reduce operating noise and vibration levels.

• Redesigned condensers offer improved air flow and sound levels.

Enhanced Life• High Ambient condenser enhances the service life

of the compressor.• Painted Galvabond base for increased service life.

KN UNITS• WJ and AW Series have now

been upgraded with liquid line drier, sightglass and Universal HP/LP control as standard.

• Includes copper tails on compressor suction valve for ease of connection.

Nullarbor Condensing Units

0.4kW 5.1kW

For more information on the Kirby

Nullabor range, contact Heatcraft

on 13 23 50.



ent

Part Number



Receiver Vol. (litres) 'B"

ModelsList

Price-20 -15 -10 -5 0 5 10

R134a - Medium / High Temperature Application

BA9MHYB1 230 295 370 465 590 755 960 1/4 1 2.6 8.88 1.4 $893.40

BA12LMYB2 305 400 505 635 795 995 1/3 1 2.9 12.1 1.4 $906.50

BA14LMYB2 345 455 580 725 915 1150 1/3 1 4 14.1 1.4 $979.12

BA16LMYB2 490 635 815 1030 1300 1620 3/8 1 3 16.2 1.4 $1,082.25

BA18LZB2 585 745 920 1140 1410 1760 2190 1/2 1 3.5 18 2.4 $1,303.07

KN014MH1-1 565 780 1030 1340 1710 2140 2660 5/8 1 4.1 21.5 2.4 $1,671.83

KN017MH1-1 705 965 1270 1630 2050 2540 3120 3/4 1 4.6 26.8 2.4 $1,783.26

KN022MH1-1 870 1160 1490 1880 2340 2880 3530 1 1 5.5 30.5 2.4 $2,381.52

KN023MH1-1 1020 1340 1710 2150 2670 3300 1 1 4.6 39.6 2.4 $2,467.30

KN029MH1-1 1230 1640 2100 2670 3380 4280 1 1 5.8 43.1 4.4 $3,079.31

KN031MH1-1 1400 1810 2300 2900 3660 4630 5840 1-1/2 1 8.2 48.1 4.4 $3,630.78

KN024L1-1 1570 2020 2550 3200 3350 5030 6310 1-1/2 1 8.7 53.5 4.4 $3,245.05* Unit ratings at 35°C ambient temperature Note - some models are available without receiver - check with your local branch

Part Number



Receiver Vol. (litres) 'B' Models

List Price-20 -15 -10 -5 0 5 10

BA16MGB2 760 965 1190 1430 1690 1980 3/4 1 3 16.2 2.4 $1,384.06

BA18MGB2 985 1210 1460 1750 2050 2360 3/4 1 4.4 18 2.4 $1,494.79

KN024MH1-1 1220 1500 1820 2170 2550 2980 3440 7/8 1 5.6 21.5 2.4 $1,915.39

KN028MH1-1 1440 1770 2150 2560 3020 3530 4070 1 1 7 26.8 2.4 $2,060.67

KN036MH1-1 1810 2280 2790 3360 3980 4650 5380 1-1/4 1 7.9 30.5 2.4 $2,290.91

KN035MH1-1 1910 2260 2720 3290 3890 4490 1-1/2 1 7.9 37.5 4.4 $2,446.06

KN044MH1-1 2130 2650 3280 4020 4820 5660 6510 2 1 9.6 43.1 4.4 $3,661.81

KN044MH1-2 2130 2650 3280 4020 4820 5660 6510 2 3 3.2/PH 43.1 4.4 $3,531.79KN048MH1-1 2160 2820 3570 4410 5350 6370 7490 2-1/4 1 11.2 48.4 4.4 $3,589.15KN048MH1-2 2160 2820 3570 4410 5350 6370 7490 2-1/4 3 4.0/PH 48.4 4.4 $3,721.46KN051MH1-1 2300 3050 3860 4730 5620 6570 2-1/2 1 12.5 53.5 4.4 $3,716.62KN051MH1-2 2300 3050 3860 4730 5620 6570 2-1/4 3 4.6/PH 53.5 4.4 $3,854.04* Unit ratings at 35°C ambient temperature Note - some models are available without receiver - check with your local branch

DANFOSS BLACKSTAR CONDENSING UNIT

Part Number Model NumberNom HP


RLAList

Price-45 -40 -35 -30 -25 -20 -15 -10 -5 0 5

R507/R404A^ LMBP

114H3727 FR6DLX T2 1/4 415 495 585 683 787 2.7 $828.45

114H2726 FR6CLX T2 1/5 88 125 166 212 264 322 385 453 525 1.7 $774.43

114H3728 FR8.5CLX T2 1/4 126 156 201 260 330 408 492 580 671 2.2 $825.44

114H3730 SC10CLX T2 1/3 210 291 381 481 589 705 830 2.4 $867.48

114H4731 SC12CLX T2 1/3 125 213 311 416 530 651 778 912 1052 3 $976.59

114H5732 SC15CLX T2 3/8 192 283 388 505 634 774 924 1084 1253 3.5 $939.51

114H5733 SC18CLX T2 1/2 225 338 461 591 728 870 1018 1171 1330 3.3 $1,035.56

114H5734 SC21CLX T2 5/8 282 393 519 659 813 980 1161 1356 3.8 $1,041.57

INDOOR HERMETIC CONDENSING UNITS (CONT'D)

Âpplication of drop-in HFC refrigerant alternatives should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36



S1: R

efrig

erat

ion

Eq

uipm

ent

DANFOSS ELECTRICAL SPARE PARTS

Part Number Model Number RelayRelay

List Price Start CapacitorStart Capacitor

List Price

R12 HBP COMPRESSORS / R502 LBP PARTS

104L2670SP SC12B 117U6003 $63.00 117U5017 $78.21

104L2830SP SC15B 117U6005 $63.00 117U5017 $78.21

104L2110SP SC18B 117U6011 $63.00 117U5017 $78.21

R404A HBP COMPRESSORS 240 V 50Hz PARTS

104L2525SP SC10DL 117U6005 $63.00 117U5017 $78.21

104L2625SP SC12DL 117U6019 $63.00 117U5017 $78.21

104L2856SP SC15DL 117-7029 $383.40 Full Electrics

R404A LBP COMPRESSORS 240 V 50Hz PARTS

103U2890SP FR8.5CL 117U6010 $63.00 117U5015 $78.21

104L2853SP SC15CL 117U6019 $63.00 117U5017 $78.21

R134a HBP COMPRESSORS PARTS

103G6780SP FR8.5G 117U6015 $63.00 117U5015 $78.21

103G6880SP FR10G 117U6010 $63.00 117U5015 $78.21

103G6980SP FR11G 117U6010 $63.00 117U5015 $78.21

104G8240SP SC12G 117U6003 $63.00 117U5017 $78.21

Model Denomination

DL = R404A/R507/R22, M/HBPCL = R404A/R507, LBPG = R134a, H/M/LBPNO = For capillary tube - without receiver or

stop valveT2 = For expansion valve - with receiver & 2

stop valves

Technical

All condensing units according to DIN8971 Comply with German safety standards VBG50 Watts input & RLA @ -25°C for LBP models & -5°C on all other models (inc. L/M/HBP) Evaporator selection @ 7KTD max, -25°C for LBP models & -5°C on all other models (inc. L/M/HBP)

Rating Conditions

Ambient temperature 32°C Return vapour temperature 20°C Inherent sub-cooling averaging 2 to 3°K

R22^ MBP

114H4728 FR8.5CLXHD T2 1/4 485 587 701 825 957 3.5 $972.53

114H5743 SC10DLX T2 3/8 608 747 899 1065 1242 4 $1,038.57

114H5744 SC12DLX T2 1/2 766 932 1112 1298 4.8 $1,056.58

114H6745 SC15DLX T2 3/4 884 1074 1282 1508 1746 4.6 $1,275.70

R134a L/M/HBP

114G2716 FR8.5GX T2 1/3 101 138 183 236 298 370 451 541 640 1.8 $774.43

114G2719 FR10GX T2 1/3 107 147 194 250 315 390 474 570 675 2 $783.42

114G3717 FR11GX T2 1/3 166 243 322 408 502 606 725 859 2.7 $828.45

114G3726 SC12GX T2 3/8 134 199 280 375 482 600 728 865 1010 2.9 $864.48

114G4727 SC15GX T2 3/8 156 242 342 456 581 719 868 1027 1197 3.5 $903.49

114G5728 SC18GX T2 1/2 183 285 398 523 663 819 994 1189 1406 4.2 $945.52

114G5730 SC21GX T2 5/8 242 343 467 612 778 964 1168 1388 1621 3.7 $1,131.62

DANFOSS BLACKSTAR CONDENSING UNIT (CONT'D)

Part Number Model NumberNom HP


RLAList

Price-45 -40 -35 -30 -25 -20 -15 -10 -5 0 5

Âpplication of drop-in HFC refrigerant alternatives should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36



ent

KIRBY COMMANDER BLUE CONDENSING UNIT

Part Number

Nominal Saturated Suction Temperature °C List PriceHP -40 -35 -30 -25 -20 -15 -10 -5

Std Ambient Range 32°C Ambient, 20°C Return Vapour & Inherent Subcooling (2 TO 3K) - R507/R404A Low Temperature

PCH032LA1-2 2.3 1190 1620 2110 2680 3350 $6,465.99

PCH040LA1-2 3.3 1780 2410 3170 4070 5120 $7,502.06

PCH061LA1-2 4.2 2650 3610 4740 6040 7530 $8,740.56

PCH094LA1-2 7.3 3500 4960 6700 8750 11140 $12,063.33

PCH128LA1-2 8.3 5000 6840 9010 11500 14380 $13,430.47Ratings are available up to 38°C Ambient R404A - contact your local Heatcraft branch

The following models include full wiring, oil seperator, fan speed control, liquid line assembly with drier and sightglass, MP15 Phase failure switch, HP/LP universal pressure controls and suction accumulators.

The following models include full wiring, oil separator, fan speed control, liquid line assembly with drier, sightglass, solenoid valve and HP/LP universal pressure controls.

The following models include full wiring, oil seperator, fan speed control, liquid line assembly with drier and sightglass, MP15 Phase failure switch and HP/LP universal pressure controls.

Part Number

Nominal Saturated Suction Temperature °C List PriceHP -25 -20 -15 -10 -5 0 5 10

Std Ambient Range 32°C Ambient, 20°C Return Vapour & Inherent Subcooling (2 TO 3K) - R507/R404A Low/Medium/High Temperature

PCH046MHA1-2 2.30 1960 2510 3150 3850 4610 5410 6220 7030 $5,948.67

PCH051MHA1-2 2.70 2060 2690 3410 4220 5080 5950 6820 7630 $5,956.74

PCH059MHA1-2 3.00 2610 3300 4080 4960 5910 6920 7940 8950 $6,431.07

PCH064MHA1-2 3.30 2700 3510 4430 5410 6440 7480 8490 9440 $6,411.46

Note: MP15 is not standard in these 4 models. Ratings are available up to 38°C Ambient R404A and 43 deg Ambient C R134a - contact your local Heatcraft branch Âpplication of alternative HFC refrigerants should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

Part Number

Nominal Saturated Suction Temperature °C List PriceHP -25 -20 -15 -10 -5 0 5 10

High Ambient Range 38°C Ambient, 20°C Return Vapour & Inherent Subcooling (2 TO 3K) - R507/R404A Low/Medium/High Temperature

PCH078MHA1-2 3.8 2390 3260 4270 5400 6610 7860 9110 10360 $6,964.07

PCH093MHA1-2 4.0 3070 4110 5280 6550 7860 9180 10480 11830 $7,426.62

PCH103MHA1-2 4.8 3690 4740 5970 7360 8890 10490 12120 13750 $7,869.88

PCH120MHA1-2 5.4 4500 5710 7100 8660 10340 12110 13910 15720 $8,174.36

PCH140MHA1-2 6.1 5340 6630 8230 10040 12020 14130 16320 18510 $8,829.19

PCH156MHA1-2 6.8 5760 7310 9150 11230 13500 15870 18300 20740 $9,421.85

PCH175MHA1-2 8.3 5980 7850 10030 12500 15210 18080 21020 23970 $10,627.34

PCH221MHA1-2 10.4 8080 10400 13080 16050 19230 22520 25820 29120 $12,156.11

PCH256MHA1-2 12.0 9410 12060 15120 18520 22190 26010 29890 33850 $13,411.33

PCH282MHA1-2 13.3 10590 13510 16870 20560 24480 28520 32610 36820 $14,201.53Ratings are available up to 46°C Ambient for R404A and higher for R134a- contact your local Heatcraft branch

KP337-1F KIT ACCUMULATOR FITTED TO SUIT PCH046MHA1-2 $665.34

KP337-2F KIT ACCUMULATOR FITTED TO SUIT PCH051MHA1-2 / 59 / 64 $676.21

KP337-4F KIT ACCUMULATOR FITTED TO SUIT PCH078MHA1-2 / 93 $693.98

KP337-6F KIT ACCUMULATOR FITTED TO SUIT PCH103MHA1-2 / 120 / 140 / 156 $715.51

KP337-7F KIT ACCUMULATOR FITTED TO SUIT PCH175MHA1-2 / 221 / 256 / 282 $881.05

KIRBY COMMANDER BLUE HIGH AMBIENT OPTIONAL ACCESSORIES (KP KITS)



S1: R

efrig

erat

ion

Eq

uipm

ent

KIRBY SEMI-HERMETIC AIR COOLED CONDENSING UNITS (WITH DORIN COMPRESSORS)

Built smart, compact and tough the Kirby Commander range offers leading performance, efficiency and reliability. External rotor fan motors and Dorin H series compressors set the standard for smooth quiet operation across a wide application range. Ultimate reliability comes standard when you combine Kirby and Dorin - trusted to handle the extremes of our climate.

Standard Features include:

Compressors • Dorin H35 and H41 compressors from 5.5 to 22HP• Reduced Operating noise levels set a new standard• Optimised for R404A, R407F and R134a with

high COP and efficiency• 50% capacity control available as an option on all models

from PCS146 upwards• Ex Factory Kits available for inverter (VSD) operation

from 30 to 65Hz

Condenser• Optimised Coil Design incorporating Inner Grooved Tube

for enhanced heat transfer• Proven Ziehl / EBM external rotor fan motors for long life

and increased efficiency.• Fan speed control (standard)

Construction• Powdercoated Galvabond base and condenser casing• High efficiency oil separator with Internal float• Dual pressure control • Liquid line drier and sight glass• Separate electrical box• Suction and Liquid line connection points located together

Operation• Ease of installation and service• Reduced noise levels • Wide operational envelope at high

ambient conditions• Two year limited warranty

INDOOR SEMI-HERMETIC CONDENSING UNITS

Part Number

Amb. Temp.

°C

Capacity Watts R404A/R507 at 20°C RG, 2K S/C

Rec'r Cap. (kg)

List Price-35 -30 -25 -20 -15 -10 -5 0 5

Dorin Low Medium High Temperature Units

PCS022LMHA1-232 660 850 1050 1300 1600 1930 2280 2640 3010

3.6

$8,175.7143 590 710 850 1050 1290 1630 1970 2270 2540

PCS031LMHA1-232 930 1200 1500 1850 2240 2660 3100 3570 4100

$8,268.3743 800 970 1200 1510 1860 2220 2560 2920 3360

PCS039LMHA1-232 1150 1480 1860 2290 2770 3270 3800 4350 4940

$8,314.7043 960 1160 1440 1830 2290 2730 3130 3530 4040

PCS057LMHA1-232 1670 2150 2710 3330 4010 4750 5560 6430 7320

$8,763.7643 1300 1710 2170 2680 3250 3860 4520 5200 5860

PCS071LMHA1-232 2070 2700 3410 4220 5120 6090 7140 8260 9400

6.6

$9,143.4143 1650 2140 2730 3420 4210 5090 5990 6850 7640

PCS084LMHA1-232 2360 3110 3990 4960 6030 7220 8530 9960 11500

$10,053.0243 1870 2460 3140 3920 4830 5870 7010 8200 9380

PCS101LMHA1-232 2850 3790 4810 5930 7180 8570 10090 11680 –

$10,596.6243 2190 3030 3920 4850 5870 6990 8200 9440 –

PCS115LMHA1-232 3360 4260 5310 6520 7950 9600 11460 13450 15450

11.6

$12,719.4843 2540 3370 4340 5430 6660 7870 9270 10990 12830

PCS136LMHA1-232 3720 4920 6300 7880 9640 11560 13630 15820 18110

$13,682.7843 3190 3940 5000 6430 8060 9710 11310 12980 14890



ent

R134a Kirby Commander Air Cooled Condensing Low Medium High Temperature Units

PCS146LMHA1-635 3590 4870 6280 7880 9680 11710 13970 16470

10.4

$14,229.2946 2920 4100 5390 6850 8490 10330 12370 14610

PCS174LMHA1-635 4290 5740 7340 9140 11170 13450 15970 18730

$15,200.0346 3550 4860 6310 7930 9760 11810 14080 16560

PCS194LMA1-635 4990 6610 8450 10530 12880 15510 18420 21550

$15,200.4746 4080 5560 7240 9130 11270 13660 16300 19170

PCS200LMHA1-635 4920 6600 8460 10570 12950 15640 18630 21950

13.8

$15,857.2046 4010 5530 7210 9110 11270 13710 16440 19430

PCS228LMA1-635 6160 8150 10370 12880 15700 18880 22440 26360

$15,816.2446 5020 6820 8840 11110 13670 16550 19710 23030

PCS284LMHA1-635 6730 9110 11770 14770 18190 22060 26380 31140

23.3

$18,930.3646 5480 7620 10010 12700 15760 19200 23000 27160

PCS318LMA1-635 8150 10740 13660 16940 20620 24730 29290 34230

$18,665.4546 6570 8930 11550 14470 17730 21370 25380 29720

PCS361LMHA2-635 8870 11930 15330 19170 23510 28380 33760 39610

$21,287.1946 7250 9980 13020 16440 20300 24610 29340 34430

PCS391LMA2-635 10320 13560 17200 21320 25930 31050 36630 42640

$22,047.2646 8350 11280 14570 18250 22360 26890 31780 36960

Part Number

Amb. Temp.

°C

Capacity Watts R134a at 20°C RG, 2K S/C Evaporating Temperature °C

Rec'r Cap. (kg)

List Price-40 -35 -30 -25 -20 -15 -10 -5 0 5 10

KIRBY COMMANDER AIR COOLED CONDENSING UNIT

Part Number

Amb. Temp.

°C

Capacity Watts R404A at 20°C RG, 2K S/C Evaporating Temperature °C

Rec'r Cap. (kg)

List Price-40 -35 -30 -25 -20 -15 -10 -5 0 5 10

R404A Kirby Commander Air Cooled Condensing Low / Medium / High Temperature Units

PCS146LMHA1-635 3810 4980 6330 7890 9690 11700 13910 16270 18690 21060

8.9

$14,229.2943 3160 4200 5410 6790 8360 10110 12020 14040 16080

PCS174LMHA1-635 4580 5940 7490 9270 11300 13560 16030 18640 21300 23850

$15,200.0343 3800 5020 6400 7990 9770 11750 13890 16130 18370

PCS194LMA1-635 3990 5320 6880 8680 10730 13010 15480 18100

$15,200.4743 4390 5790 7410 9220 11210 13360 15620

PCS200LMHA1-635 5460 7070 8910 11010 13400 16080 19050 22260 25650 29040

11.9

$15,857.2043 4500 5950 7590 9460 11560 13900 16430 19110 21840

PCS228LMA1-635 4770 6390 8130 10110 12380 14950 17830 20930

$15,816.2443 5270 6820 8570 10580 12840 15310 17880

PCS284LMHA1-635 7680 9990 12570 15520 18900 22730 26980 31570 36340 41120

20.0

$18,930.3643 6250 8260 10570 13210 16190 19500 23110 26920 30800

PCS318LMA1-635 6670 9040 11560 14410 17680 21380 25470 29810

$18,665.4543 7450 9670 12180 15040 18250 21720 25330

PCS361LMHA2-635 10260 13090 16270 19930 24090 28710 33680 38790 43780 48430

$21,287.1940 9080 11740 14730 18120 21920 26110 30550 35020 39130

PCS391LMA2-635 8220 11180 14300 17790 21750 26190 31040 36160

$22,047.2640 7220 9960 12850 16080 19740 23800 28190 32720

For a complete range of ancillary "KP Kits", view the product brochure at www.heatcraft.com.au, or contact your local Heatcraft branch on 13 23 50.



S1: R

efrig

erat

ion

Eq

uipm

ent

R407F Kirby Commander Air Cooled Condensing Low / Medium / High Temperature Units

PCS146LMHA1-635 4488 5931 7582 9461 11590 13989 16659 19581 22706

10.4

$14,229.2943 5314 6775 8465 10409 12608 15049 17711 20572

PCS174LMHA1-635 5181 6869 8795 10973 13433 16206 19300 22685 26275

$15,200.0343 6146 7880 9836 12058 14581 17418 20532 23815

PCS194LMA1-635 5902 7806 9964 12404 15164 18264

$15,200.4743 6981 8925 11124 13627 16462

PCS200LMHA1-635 5951 7893 10118 12635 15480 18691 22293 26269 30546

13.8

$15,857.2043 7063 9065 11319 13878 16792 20092 23758 27683

PCS228LMA1-635 5067 6984 9170 11689 14565 17796 21365

$15,816.2443 8181 10454 13070 16032 19320

PCS284LMHA1-635 8458 11233 14427 18026 22063 26593 31659 37260 43303

23.3

$18,930.3643 10067 12925 16142 19783 23910 28551 33679 39179

PCS318LMA1-635 6813 9458 12498 15929 19796 24161 29059

$18,665.4543 11170 14255 17732 21669 26116

PCS361LMHA2-635 7998 11061 14550 18552 23095 28174 33781 39916 46590 53810

$21,287.1943 12998 16596 20708 25351 30511 36156 42244

PCS391LMA2-635 8912 12291 16154 20570 25553 31088 37167

$22,047.2643 10935 14420 18413 22956 28038 33629

Part Number

Amb. Temp.

°C

Capacity Watts R407F at 20°C RG, 2K S/C Evaporating Temperature °C

Rec'r Cap. (kg)

List Price-40 -35 -30 -25 -20 -15 -10 -5 0 5 10

Auxilary Head Cooling Fan Kit Required


KP528-2F KIT HEAD COOLING FAN FACTORY FIT $938.04

KP528-2 KIT HEAD COOLING FAN FIELD FIT $754.21

For ancillary "KP Kits", view the product brochure at www.heatcraft.com.au, or contact your local Heatcraft branch on 13 23 50.

KIRBY COMMANDER AIR COOLED CONDENSING UNITINDOOR SEMI-HERMETIC CONDENSING UNITS (CONT'D)


ent


KIRBY SEMI-HERMETIC BASIC UNITS (WITH DORIN 2 CYLINDER COMPRESSORS)

Standard configuration includes: • Oil Separator • Liquid Reciever• Liquid Line Drier• Liquid Line SG. Moisture Indicator • Auto LP/HP Pressure Control • Powder Coated - Galvanised Sheet metal Base

Optional Configurations available on request :• DOL Electrical Control Box-Fully Wired• MP15 Phase Failure Safety Control• Compressor-Head Cooling Fan • Liquid Line Soleniod Valve • Pump Down LP Control• Suction Accumulator• Water Cooled Condenser & Condensing Pressure Water Valve • Dixell Controller Fitted


INDOOR SEMI-HERMETIC CONDENSING UNITS (CONT'D)

Part Number

Nom. HP Opt.Motors

Display

m3/hrElectrical

Power Supply

RLA† (Amps/

ph)

Capacity Watts R404A/R507 (45°c Saturated Condensing Temperature) Rec'r

Cap. Nom. Kg. List

Price

*Evaporating Temperature oC

5 0 -5 -10 -15 -20 -25 -30 -35

Dorin Basic Low / Medium / High Temperature UnitsPCS016LMHB-1

(H40CC-S/HTCR)0.8 2.89

240 V / 50Hz 1PH

4.4 2290 1910 1580 1300 1050 840 660 500 370 4.4L $5,599.40

PCS016LMHB-2

H40CC/HTCR1 2.89

420 V / 50Hz 3PH

1.6 2290 1910 1580 1300 1050 840 660 500 370 4.4L $4,911.97

PCS022LMHB-1

H75CC-S/HTCR1.0 3.86

240 V / 50Hz 1PH

6.6 3120 2610 2170 1790 1450 1160 910 690 490 4.4L $5,739.06

PCS022LMHB-2

H75CC/HTCR1 3.86

420 V / 50Hz 3PH

2.1 3120 2610 2170 1790 1450 1160 910 690 490 4.4L $5,050.99

PCS032LMHB-1

H100CC-S/HTCR2 5.30

240 V / 50Hz 1PH

7 3820 3170 2610 2120 1700 1330 1010 720 4.4L $6,250.10

PCS032LMHB-2

H100CC/HTCR2 5.30

420 V / 50Hz 3PH

2.7 3820 3170 2610 2120 1700 1330 1010 720 4.4L $5,457.08

PCS039LMHB-1

H150CC-S/HTCR3 6.75

240 V / 50Hz 1PH

8 4660 3870 3190 2590 2070 1610 1200 830 4.4L $6,298.22

PCS039LMHB-2

H150CC/HTCR3.0 6.75

420 V / 50Hz 3PH

3.1 4660 3870 3190 2590 2070 1610 1200 830 4.4L $5,484.08

PCS044LMHB-2

H180CC/HTCR3.0 7.71

420 V / 50Hz 3PH

3.8 6360 5320 4420 3630 2950 2350 1830 1360 940 4.4L $5,657.84

PCS050LMHB-2

H200CC/HTCR3.0 8.47

420 V / 50Hz 3PH

4.5 7130 5970 4960 4080 3310 2640 2060 1540 1060 4.4L $5,773.15

PCS058LMHB-2

H220CC/HTCR3.0 9.88

420 V / 50Hz 3PH

6.2 8290 6950 5770 4750 3860 3080 2390 1790 1240 4.4L $5,873.76

PCS073LMHB-2

H280CC/HTCR3.8 12.17

420 V / 50Hz 3PH

6.9 10460 8750 7260 5950 4820 3830 2960 2190 1490 8.2L $6,010.05

PCS084LMHB-2

H300CC/HTCR3.8 14.74

420 V / 50Hz 3PH

6.9 12630 10550 8730 7130 5760 4570 3560 2700 1980 8.2L $6,558.31

PCS092LMHB-2

H350CC/HTCR3.8 15.94

420 V / 50Hz 3PH

7.3 13620 11400 9450 7770 6310 5060 3990 3080 2310 8.2L $6,753.83

PCS103LMHB-2

H380CC/HTCR3.8 17.53

420 V / 50Hz 3PH

8.1 12570 10470 8630 7040 5680 4500 3500 2650 8.2L $6,893.28

PCS114LMHB-2

H403CC/HTCR5.5 19.98

420 V / 50Hz 3PH

8.5 16760 13880 11400 9270 7450 5910 8.2L $7,098.76

PCS139LMHB-2

H503CC/HTCR7.5 22.83

420 V / 50Hz 3PH

11.1 19920 16710 13870 11380 9200 7320 5690 4300 3110 8.2L $7,696.45

* Evaporating temperatures below -35°C available on request. † Compressor Rated Load Amps at -5° SST R22 (HT), -5° SST R404A (MT) and 45°C SCT. For comparison purposes only. Auxiliary Cooling Fan Required @-25° SST and lower.

Âpplication of alternative HFC refrigerants should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

Products shown include optional extras. For larger

models, please contact your local Heatcraft branch.

Semi Hermetic 2 Cylinder Basic UnitsA quieter, more powerful range

1.58kW 13.87W

For more information on the Kirby

Polar Pack range, contact Heatcraft

on 13 23 50.



S1: R

efrig

erat

ion

Eq

uipm

ent

SEMI-HERMETIC CONDENSING UNITS ACCESSORIES

Part Number Description Reference List Price

2835339 KIT CAPAC.CONTROL(REED/DISCUS) D4/D6/D6T $751.03

3168329 KIT OPS1 OIL SENSOR & SWITCH $838.11

3133581 MODULE THERM INT69 200-260V DL,DK,DM,D2,D3 $631.74

3133638 THERMISTER RELAY INT69TM D4D,D6D,D8D,DISCUS $928.30

1LGB061 GASKET VALVE REGULATOR SUIT K750CC,K1000CC,K1500CC $3.34

2EG2020 HEATER C/CASE DORIN "H" SERIES INSERTABLE TYPE 100W $366.07

2P21010 COIL VLV REGULATOR 220/50HZ SUIT K750CC,K1000CC,K1500CC $158.62

918-0028-01 CCH INTERNAL 2D/3D/4D/6D $466.88

918-0041-00 CCH ZF09/11,ZS21/26,ZR22/47 $143.87

918-0043-00 CCH ZF13/18,ZS30/45,ZR49/81 (SAME AS 018-0072-00) BU03135 $161.66

OMT40-240/24V 240V TO 24V 40VA TRANSFORMER $154.81

OW3001 OILWATCH COMPRESSOR CONTROL DORIN H41 H5 H6 H7 & D2,3,4,6 $526.64

TF20D TRANSFORMER 230/24V,20VA DIXELL TRAXOIL (2PER) $128.78

TR3201 TRAXOIL(D2,3,4,6,9,4CC & 6CC) $839.77

TR3202 TRAXOIL(COPELAND ZB,ZF & ZS) $803.15

TR3203 TRAXOIL(DORIN "H" & MAN LT,MT,SM) $886.01

TR3204 TRAXOIL(DK & DL) $886.01

TR3207 TRAXOIL(D8 DISCUS COMPS) $822.87

TR3212 TRAXOIL(ZR90 TO19M, 250 TO 380) $983.45

OW3203 OILWATCH DORIN H1,H2,H32,H35 $526.64

2PN0521 BODY VALVE REGULATOR + screws Dorin Capacity Control $168.17

2P21010 COIL VLV REG + CONN 220/50HZ Dorin Capacity Control $158.62

2CC4010 INT69 MOTOR PROTECTION DORIN $310.47

2CC1050 THEMISTOR DORIN CONTROL RELAY $1,640.21

2CC1140 DORIN CPM MODULE $754.09

2CG4030 OIL SENSOR DORIN PRESSURE(DPS) SUITS K5 & Y WITH CMP $662.39

2CG9030 DELTA PII OIL DIFF SWITCH ASSY DORIN H5-H6-H7 $550.45



ent

LT Application Note: Should a Suction Accumulator be required it will have to be installed externally to Fridgebox CDU.

OUTDOOR CONDENSING UNITS

KIRBY FRIDGEBOX SERIES IV MICROCHANNEL OUTDOOR CONDENSING UNIT

Part NumberAmb. (°C)

Capacity Rating in Watts

Rec'r Cap. (kg)

List Price

SST in °C

LT* MT HT

-35 -30 -25 -20 -15 -10 -5 0 5 10

R404A Medium/High Temperature

FBH043MHZ1-2

(2 HP)

30 1620 2070 2590 3150 3760 4420 5130 5900 6750

6.8 $7,412.83 35 1450 1860 2340 2870 3440 4050 4710 5420 6180

40 1270 1650 2100 2580 3110 3680 4290 4930 5620

43 1160 1530 1950 2410 2910 3450 4030 4640 5280

FBH051MZ1-2

(2.5 HP)

30 2160 2630 3180 3790 4470 5210 6030 6920 7900

6.8 $7,836.19 35 2000 2430 2940 3500 4130 4820 5580 6420 7330

40 1830 2230 2690 3210 3790 4430 5140 5910 6750

43 2110 2550 3040 3590 4200 4870 5610 6400

FBH066MHZ1-2

(3 HP)

30 2670 3290 4020 4850 5790 6840 8000 9280 10690

8.9 $8,774.56 35 2480 3050 3720 4490 5360 6330 7400 8580 9880

40 2280 2810 3430 4130 4930 5820 6800 7890 9070

43 2160 2660 3250 3920 4670 5510 6440 7470 8590

FBH075MHZ1-2

(3.5 HP)

30 3110 3800 4610 5540 6580 7750 9040 10470 12050

8.9 $9,344.27 35 2880 3520 4270 5130 6090 7180 8380 9710 11180

40 2640 3240 3920 4710 5600 6600 7720 8950 10310

43 2500 3060 3720 4470 5310 6260 7320 8490 9790

FBH086MHZ1-2

(4 HP)

30 3580 4380 5320 6390 7590 8910 10350 11930 13670

8.9 $10,041.33 35 3300 4040 4910 5890 7000 8230 9580 11060 12680

40 3020 3700 4500 5400 6410 7550 8810 10200 11700

43 2850 3500 4250 5100 6060 7140 8350 9680 11100

FBH103MHZ1-2

(5 HP)

30 4370 5330 6440 7690 9080 10600 12260 14030 15930

8.9 $10,365.35 35 4050 4940 5950 7110 8390 9800 11340 12990 14750

40 3730 4540 5470 6520 7700 9000 10420 11950 13570

43 4300 5180 6170 7290 8520 9870 11320 12860

The new generation Kirby® Fridgebox® includes Hypercore™ microchannel coil technology in place of the traditional fin and tube. The Kirby Fridgebox micro-channel all aluminium coil is extremely durable, low maintenance and will lower the amount of refrigerant in the system by up to 50%, compared to a conventional aluminium fin and copper tube design.

Using the latest Copeland scroll compressors and generous sized condensers, this value range of low noise outdoor units will cover most medium and low temperature applications that use R134a, R404A and R507 refrigerants.

For ease of service, convenient access panels (as seen on previous Fridgebox versions) have also been reintroduced.

Âpplication of alternative HFC refrigerants should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

Features

• Compact, light footprint design• Weather resistant powder coated casing• Impressive capacity and application• Copeland ZB scroll compressor technology and performance• Hypercore microchannel condenser technology• High ambient operation 43°C and higher

• Condenser fan speed control - high side pressure reference• Danfoss universal adjustable dual pressure control• Removable service access panels, liquid receiver, liquid line drier • Fully pre-wired• Accessible services connection points• Universal full packaging for ease of transportation



S1: R

efrig

erat

ion

Eq

uipm

ent

LT Application Note: Should a Suction Accumulator be required it will have to be installed externally to Fridgebox CDU.

R134a Medium/High Temperature

FBH043MHZ1-2

(2 HP)

30 1590 1990 2460 2990 3590 4260 4970

7.8 $7,412.83 35 1490 1870 2310 2820 3400 4030 4710

40 1750 2170 2650 3200 3800 4450

46 2040 2500 3020 3590 4210

FBH051MHZ1-2

(2.5 HP)

30 1630 2100 2660 3310 4040 4830 5650

7.8 $7,836.19 35 1570 2010 2530 3150 3840 4600 5370

40 1910 2400 2990 3650 4370 5100

46 2290 2840 3480 4160 4860

FBH066MHZ1-2

(3 HP)

30 2310 2880 3570 4370 5290 6310 7440

10.4 $8,774.56 35 2190 2740 3400 4170 5040 6020 7100

40 2080 2600 3230 3970 4800 5740 6760

46 2480 3080 3790 4590 5480 6450

FBH075MHZ1-2

(3.5 HP)

30 2330 3000 3790 4690 5690 6790 7960

10.4 $9,344.27 35 2180 2820 3570 4440 5420 6480 7600

40 2020 2630 3360 4200 5140 6160 7250

46 2460 3170 3980 4890 5880 6930

FBH086MHZ1-2

(4 HP)

30 3060 3850 4790 5860 7060 8360 9760

10.4 $10,041.33 35 2900 3660 4550 5570 6710 7960 9300

40 3460 4310 5280 6370 7560 8840

46 4090 5020 6060 7200 8420

FBH103MHZ1-2

(5 HP)

30 3670 4660 5800 7080 8500 10040 11720

11.4 $10,365.35 35 3480 4430 5530 6760 8110 9580 11170

40 4210 5260 6430 7710 9110 10620

46 5020 6140 7360 8690 10120

FBH116MHZ1-2

(6 HP)

30 4450 5550 6830 8290 9900 11650 13510

10.4 $10,489.24 35 4220 5250 6460 7850 9380 11040 12820

40 4950 6100 7400 8850 10430 12120

46 5760 7000 8380 9890 11500

Product NumberReceiver Connections Dimensions Approx. Unit Weight kg Shipping

Volume M3Volume (l) Liquid Suction H W D Unpacked Packed

FBH043MHZ1-2 8.2 12.7 19.0 569 1414 559 84 99 0.81

FBH051MHZ1-2 8.2 12.7 19.0 569 1414 559 86 101 0.81

FBH066MHZ1-2 10.9 12.7 19.0 729 1491 574 83 103 1.04

FBH075MHZ1-2 10.9 12.7 19.0 729 1491 574 84 104 1.04

FBH086MHZ1-2 10.9 12.7 22.2 729 1491 574 93 113 1.04

FBH103MHZ1-2 10.9 12.7 22.2 729 1491 574 94 114 1.04

FBH116MHZ1-2 10.9 12.7 22.2 729 1491 574 96 116 1.04


Capacity Rating in Watts

Rec'r Cap. (kg)

List Price

SST in °C

LT* MT HT

-35 -30 -25 -20 -15 -10 -5 0 5 10

FBH116MHZ1-2

(6 HP)

30 5090 6180 7430 8820 10350 11990 13770 15700 17800

8.9 $10,489.24 35 4650 5680 6850 8160 9580 11110 12750 14510 16390

40 4200 5170 6280 7490 8810 10230 11730 13320 14980

43 4870 5930 7100 8350 9700 11110 12600

KIRBY FRIDGEBOX SERIES IV MICROCHANNEL OUTDOOR CONDENSING UNIT (CONT'D)



ent

KIRBY POLAR PACK SERIES III

Compact and robust, our Polar Pack Series III commercial refrigeration unit is specially designed for harsh ambient conditions. Pre-wired and constructed around a small base, Polar Pack is easy to install. And because it’s from Kirby, Polar Pack is tough and reliable – guaranteed.

Kirby’s outdoor condensing units have always been renowned for their durability and clever design. The Polar Pack is no exception. Being a fully enclosed system, it can be installed indoors or outside.

• Hi-Ambient (45°C)

• Easy Servicing

• Fast Installation

• Fully pre-wired

• Designed for Australian Conditions

• Fan speed control

• 1 to 11.3kW capacity

• Coil protection standard on all units

• EC Condenser Fan Option available

Rating data available for R407F refrigerant application on certain unit models Âpplication of HFC refrigerant alternatives should be verified with your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

R404A Low Temperature Range Condensing Units (Reciprocating-Hermetic Compressors)

PPH010LA1-1 (3/4 HP)

35 520 700 915 1160 1440

2.0

$5,475.89 45 540 700 905 1165

PPH012LA1-1 (7/8 HP)

35 625 845 1105 1405 1745 $5,475.89

45 630 835 1090 1390

PPH014LA1-1 (1 HP)

35 705 975 1280 1620 2000 $5,475.89

45 740 1005 1300 1640

PPH020LA1-1 (1.25 HP)

35 1085 1445 1855 2310 2815

3.6

$6,020.16 45 1020 1405 1825 2285

PPH024LA1-1 (1.5 HP)

35 1750 2200 2785 3495 $6,956.04

45 1190 1665 2230 2890

PPH028LA1-2 (2.3 HP)

35 1840 2430 3085 3810 4600 $7,684.83

45 1450 1955 2520 3145 3830

PPH043LA1-2 (3.3 HP)

35 2945 3865 4950 6190

6.8

$10,122.10 45 2250 3050 3980 5035

PPH050LA1-2 (3.8 HP)

35 2675 3605 4680 5905 7280 $10,281.41

45 2800 3725 4785 5975

PPH061LA1-2 (4 HP)

35 3385 4490 5755 7180 87606.8 $10,387.60

45 2620 3575 4670 5900 7270

Part Number Amb. (°C)

LT MT HT Rec'r Cap. (kg)

List PriceUnit -35 -30 -25 -20 -15 -10 -5 0 5 10

R404A Medium Temperature Range Condensing Units (Reciprocating Hermetic Compressors)

PPH016MA1-1 (3/4 HP)

35 900 1095 1310 1545 1795 2070

2.0

$5,475.89 45 735 905 1090 1285 1495 1720

PPH018MA1-1 (7/8 HP)

35 1005 1230 1475 1730 2005 2300 $5,568.82

45 820 1010 1210 1425 1645 1885

PPH022MA1-1 (1 HP)

35 1435 1745 2090 2465 2875 3310 $5,701.57

45 1130 1420 1735 2075 2435 2820

PPH027MA1-1 (1.25 HP)

35 1765 2170 2580 2995 3415 3845 $6,099.81

45 1440 1805 2165 2515 2860

PPH030MA1-1 (1.5 HP)

35 2005 2440 2890 3360 3845 4350 $6,232.56

45 1635 2020 2405 2795 3180



S1: R

efrig

erat

ion

Eq

uipm

ent



List PriceUnit -35 -30 -25 -20 -15 -10 -5 0 5 10

R404A Low / Medium Temperature Range Condensing Units (Semi-Hermetic 2 CYL Compressors)

PPS016LMA1-3 (3/8 HP)

35 425 565 730 910 1110 1330 1570 1830 2105

2.0

P.O.A.45 315 445 585 740 910 1100 1300 1520 1750

PPS016LMA1-4 (3/8 HP)

35 425 565 730 910 1110 1330 1570 1830 2105P.O.A.

45 315 445 585 740 910 1100 1300 1520 1750

PPS022LMA1-3 (3/4 HP)

35 655 825 1030 1270 1535 1835 2170 2530 2925 $7,945.01

45 615 720 865 1045 1260 1515 1805 2130 2495

PPS022LMA1-4 (3/4 HP)

35 655 825 1030 1270 1535 1835 2170 2530 2925 $7,847.46

45 615 720 865 1045 1260 1515 1805 2130 2495

PPS031LMA1-3 (1 HP)

35 835 1135 1465 1825 2215 2635 3080 3560 4065P.O.A.

45 670 925 1205 1510 1835 2190 2565 2965 3395

PPS031LMA1-4 (1 HP)

35 835 1135 1465 1825 2215 2635 3080 3560 4065 $8,051.22

45 670 925 1205 1510 1835 2190 2565 2965 3395



List PriceUnit -35 -30 -25 -20 -15 -10 -5 0 5 10

PPH040MA1-1 (2 HP)

35 2520 3145 3810 4525 5285 6090

3.6

$6,770.19 45 1910 2485 3075 3675 4280

PPH040MA1-2 (2 HP)

35 2520 3145 3810 4525 5285 6090 $6,803.38

45 1910 2485 3075 3675 4280

PPH046MA1-1 (2.25 HP)

35 2830 3640 4505 5430 6415 7455 $6,869.75

45 2290 3045 3815 4595 5400

PPH046MA1-2 (2.25 HP)

35 2830 3640 4505 5430 6415 7455 $6,836.57

45 2290 3045 3815 4595 5400

PPH052MA1-1 (2.5 HP)

35 3120 4015 4955 5940 6970 8050 $7,268.00

45 2520 3365 4195 5010 5805

PPH052MA1-2 (2.5 HP)

35 3120 4015 4955 5940 6970 8050 $7,234.81

45 2520 3365 4195 5010 5805

PPH062MA1-1 (3 HP)

35 2495 3235 4050 4935 5890 6915 8015

6.8

$8,130.88 45 2570 3255 3990 4765 5585 6455

PPH062MA1-2 (3 HP)

35 2495 3235 4050 4935 5890 6915 8015 $8,164.07

45 2570 3255 3990 4765 5585 6455

PPH068MA1-2 (3.3 HP)

35 2550 3465 4420 5405 6435 7500 8600 $8,562.31

45 2775 3600 4425 5255 6090 6935

PPH075MA1-2 (3.8 HP)

35 2770 3780 4855 6000 7210 8490 9835 $8,728.25

45 3005 3950 4920 5920 6950 8005

PPH089MA1-2 (4.2 HP)

35 3260 4420 5645 6930 8275 9685 11155 $9,418.54

45 3505 4565 5645 6755 7890 9050

PPH100MA1-2 (4.8 HP)

35 3490 4755 6110 7565 9115 10760 12500 $9,949.54

45 3805 4980 6200 7480 8805 10180

PPH113M A1-2 (5.4 HP)

35 4150 5600 7130 8745 10445 12235 14105 $10,041.24

45 4445 5785 7145 8525 9930 11360

KIRBY POLAR PACK SERIES III UP TO 6HP (CONT'D)



ent



List PriceUnit -35 -30 -25 -20 -15 -10 -5 0 5 10

PPS039LMA1-3 (1.5 HP)

35 980 1370 1790 2240 2730 3250 3805 4395 5020

3.6

$8,091.04 45 930 1200 1515 1870 2265 2705 3185 3700 4260

PPS039LMA1-4 (1.5 HP)

35 980 1370 1790 2240 2730 3250 3805 4395 5020 $8,091.04

45 930 1200 1515 1870 2265 2705 3185 3700 4260

PPS046LMA1-4 (1.8 HP)

35 1185 1615 2095 2625 3205 3840 4520 5255 6040 $8,130.88

45 960 1320 1720 2165 2655 3180 3750 4365 5015

PPS051LMA1-4 (2.0 HP)

35 1275 1775 2315 2910 3545 4230 4965 5745 6570 $8,130.88

45 1000 1425 1890 2395 2930 3505 4120 4770 5460

PPS057LMA1-4 (2.2 HP)

35 1365 1975 2625 3310 4035 4795 5595 6430 7305 $9,531.37

45 940 1515 2105 2715 3340 3990 4655 5340 6045

PPS074LMA1-4 (2.8 HP)

35 1485 2345 3235 4165 5130 6135 7175 8250 9365

6.8

$10,905.32 45 1385 2050 2755 3510 4310 5155 6050 6985 7970

PPS084LMA1-4 (3 HP)

35 1805 2715 3695 4740 5855 7035 8280 9595 10975 $11,223.93

45 1205 2030 2900 3820 4780 5795 6855 7960 9115

PPS094LMA1-4 (3.5 HP)

35 2055 3060 4145 5300 6530 7830 9205 10655 12175 $11,515.96

45 1535 2400 3330 4315 5360 6460 7620 8835 10110

PPS103LMA1-4 (3.8 HP)

35 2480 3520 4655 5880 7200 8615 10120 11725 13420 $11,847.84

45 2240 3010 3885 4865 5955 7150 8450 9855 11365


KIRBY POLAR PACK SERIES III UP TO 6HP OPTIONAL ACCESSORIES (KP KITS) FACTORY FITTED

Part Number Description Models List Price

KP540-1F Horizontal Airflow Kit - Condenser Fan Air DischargePPH016,018,022,027,030,040 PPH010,012,014 PPS016,022,031,039,046

$794.01

KP540-2F Horizontal Airflow Kit - Condenser Fan Air Discharge PPH046,052 PPS051,057 PPH024,028 $777.67

KP540-3F Horizontal Airflow Kit - Condenser Fan Air Discharge PPH062,068 $1,122.87

KP540-11F LP Auxiliary Control Kit All Models $427.71

KIRBY POLAR PACK SERIES III UP TO 6HP (CONT'D)



S1: R

efrig

erat

ion

Eq

uipm

ent



List Price-35 -30 -25 -20 -15 -10 -5 0 5 10

R404A Low / Medium Temperature Range Condensing Units (Maneurop Hermetic Reciprocating Compressors)

PPH131MHA1-235 4510 6090 7830 9780 11970 14450 17220 20220

11.2

$13,603.32 45 3480 4690 6120 7770 9620 11660 13870

PPH153MHA1-235 5560 7270 9240 11490 13990 16760 19800 23080

$14,266.12 45 4280 5710 7380 9270 11390 13700 16160

PPH170MHA1-235 6,370 8,540 10,880 13,385 16,065 18,915 21,930 25,120

$16,332.85 45 4,985 6,880 8,910 11,070 13,360 15,785 18,340 21,030

PPH217MHA1-235 8,680 11,375 14,225 17,230 20,385 23,700 27,165 30,785

$17,566.75 45 6,625 9,025 11,435 13,865 16,305 18,765 21,240

PPH251MHA1-235 10,140 13,195 16,475 19,970 23,690 27,630 31,790 36,170

23.3

$19,821.37 45 7,770 10,520 13,335 16,215 19,160 22,175 25,255

PPH283MHA1-235 11,815 15,110 18,755 22,745 27,085 31,770 36,805 42,185

$20,878.70 45 9,030 11,980 15,080 18,330 21,735 25,290 29,000 32,855

R404A Low / Medium Temperature Range Condensing Units (Dorin Semi-Hermetic 4 CYL Reciprocating Compressors)

PPS124LMA1-235 3,030 3,880 4,900 6,140 7,640 9,440 11,490 13,750 16,130 18,570

11.2

$17,071.86 45 2,370 3,030 3,870 4,930 6,220 7,730 9,450 11,340 13,360

PPS149LMA1-235 3,470 4,430 5,670 7,200 9,050 11,220 13,720 16,530 19,610 22,920

$18,319.34 45 2,660 3,450 4,480 5,760 7,330 9,190 11,320 13,670 16,180

PPS152LMHA1-435 5,080 6,460 8,080 9,960 12,100 14,470 17,030 19,700 22,420

$19,870.22 45 5,210 6,570 8,170 10,000 11,990 14,070 16,160

PPS178LMHA1-435 6,050 7,630 9,450 11,560 13,960 16,610 19,460 22,440 25,460

$20,395.78 45 6,160 7,710 9,500 11,530 13,750 16,090 18,450

PPS205LMHA1-435 7,170 9,020 11,160 13,630 16,410 19,470 22,750 26,160 29,570

$21,346.32 45 7,290 9,110 11,210 13,560 16,110 18,780 21,440

A tough compact and robust commercial condensing unit the Kirby Polar Pack Titan offers impressive performance and capacity (ranging from 12-41kW) within a small footprint.

Pre-wired for convenient installation the Titan thrives in harsh ambient conditions and under heavy loads. Being a fully enclosed system it can be installed indoors or outside.

And because it’s from Kirby the Titan has an enviable reputation for toughness efficiency and reliability.

Standard Configurations - All Models

• Dorin H Series New Generation Semi Hermetic Compressors (11 Models)• Maneurop Hermetic Compressor (6 Models)• True High Ambient (45Deg.C) Condenser Design• Inactive Capacity Control Function Semi Hermetic Compressors• Compressor Sump Heater

• Electrical Motor Protection INT 69• Universal-Multi Function Dual Pressure Control• Liquid Receiver Drier & Moisture Indicator Sight Glass• Oil Separator• High Efficiency Low Noise External Rotor Condenser Fan Motors• Fan speed control fitted as standard (EC fans are available

as an option)• Electrical Panel - Fully Wired Complete With 3PH.

Main Isolator Switch• Phase Failure Control - MP15D• Kirby Blue Kote Protection to Condenser Coil• VSD Kits available for certain models, refer following page• True High Ambient (45Deg.C) Condenser Design

KIRBY TITAN POLAR PACK OVER 6HP




ent

R134a Medium / High Temperature Range Condensing Units (Maneurop Hermetic Reciprocating Compressors)

PPH131MHA1-235 6490 8300 10420 12880 15660

13.8

$13,603.32 45 5200 6840 8740 10940 13420

PPH153MHA1-235 7510 9550 11950 14740 17920

$14,266.12 45 6130 8000 10140 12620 15450

PPH170MHA1-235 7,950 10,210 12,755 15,595 18,720

$16,332.85 45 6,645 8,660 10,910 13,390 16,100

PPH217MHA1-235 10,050 12,800 15,875 19,295 23,060

$17,566.75 45 8,300 10,770 13,510 16,520 19,820

PPH251MHA1-235 12,745 15,990 19,610 23,595 27,950

23.3

$19,821.37 45 10,830 13,740 16,945 20,445 24,240

PPH283MHA1-235 14,100 17,705 21,750 26,235 31,160

$20,878.70 45 12,040 15,215 18,730 22,585 26,780

R134a Condensing Unit (Dorin Semi-Hermetic 4 CYL Reciprocating Compressors)

PPS124LMA1-235 3840 4980 6350 7940 9770 11860 14240

13.2

$17,071.86 45 3250 4300 5550 7010 8690 10610 12820

PPS149LMA1-235 4530 5880 7490 9380 11530 13990 16790

$18,319.34 45 3780 5040 6530 8260 10220 12470 15070

PPS152LMHA1-435 4,930 6,370 8,000 9,850 11,950 14,300 16,900

$19,870.22 45 4,200 5,500 6,970 8,660 10,580 12,730 15,090

PPS178LMHA1-435 5,800 7,430 9,270 11,360 13,720 16,350 19,250

$20,395.78 45 4,970 6,430 8,080 9,960 12,090 14,470 17,080

PPS205LMHA1-435 6,640 8,520 10,650 13,070 15,810 18,890 22,300

$21,346.32 45 5,660 7,350 9,270 11,480 14,000 16,810 19,890

PPS289LMHA1-435 9,160 11,840 14,870 18,330 22,260 26,660 31,520

$23,968.66 45 7,800 10,180 12,900 16,040 19,610 23,580 27,920

PPS338LMHA1-435 10,820 13,900 17,410 21,410 25,960 31,070 36,740

23.3

$26,367.68 45 12,050 15,190 18,820 22,960 27,610 32,720

PPS242LMA1-435 8,380 10,720 13,390 16,440 19,870 23,670 27,860

$23,267.78 45 7,100 9,190 11,620 14,410 17,560 21,040 24,820

PPS328LMA1-435 8,290 10,920 13,910 17,310 21,170 25,500 30,290 35,510

$24,733.09 45 9,190 11,850 14,930 18,450 22,380 26,680 31,300

PPS370LMA1-435 9,590 12,500 15,800 19,540 23,780 28,520 33,760 39,460

$27,513.90 45 10,590 13,530 16,940 20,810 25,120 29,800 34,840

PPS411LMA1-435 10,540 13,880 17,670 21,980 26,860 32,320 38,350 44,930

$29,494.14 45 11,700 15,080 18,980 23,440 28,420 33,870 39,730

KIRBY TITAN POLAR PACK (CONT'D)



List Price-35 -30 -25 -20 -15 -10 -5 0 5 10

PPS242LMA1-435 6,640 8,500 10,620 13,090 15,940 19,140 22,640

20.2

$23,267.78 45 6,740 8,520 10,620 13,070 15,800 18,730

PPS289LMHA1-435 7,610 9,920 12,570 15,630 19,160 23,130 27,540 32,300 37,320 42,450

$23,968.66 45 7,920 10,120 12,690 15,670 19,030 22,700 26,570 30,500 34,320

PPS328LMA1-435 11,870 14,840 18,280 22,230 26,650 31,440

$24,733.09 45 9,390 11,890 14,830 18,200 21,910 25,830

PPS338LMHA1-435 9,040 11,710 14,760 18,270 22,300 26,880 31,980 37,570 43,540 49,710

$26,367.68 45 9,260 11,800 14,760 18,220 22,180 26,570 31,300 36,170 40,900

PPS370LMA1-435 13,260 16,560 20,380 24,740 29,570 34,730

$27,513.90 45 10,560 13,380 16,650 20,360 24,390 28,600

PPS411LMA1-435 14,820 18,510 22,780 27,670 33,120 39,020

$29,494.14 45 11,760 14,900 18,570 22,750 27,360 32,210



S1: R

efrig

erat

ion

Eq

uipm

ent



List Price-35 -30 -25 -20 -15 -10 -5 0 5 10

R407F Condensing Unit (Dorin Semi-Hermetic 4 CYL Reciprocating Compressors)

PPS152LMHA1-435 4520 5980 7640 9560 11750 14240 17030 20100 23400

13.0

$19,870.22 45 5160 6580 8250 10230 12540 15170 18020 20960

PPS178LMHA1-435 5230 6920 8850 11070 13600 16460 19650 23160 26960

$20,395.78 45 5990 7620 9550 11810 14400 17280 20420 23770

PPS205LMHA1-435 7950 10170 12720 15630 18910 22560 26560 30910

$21,346.32 45 6890 8770 10970 13550 16520 19810 23390 27240

PPS289LMHA1-435 8540 11300 14450 18080 22220 26870 32050 37750 43990

22.0

$23,968.66 45 9770 12450 15590 19270 23480 28160 33260 38760

PPS338LMHA1-435 12750 16320 20420 25110 30410 36330 42870 49990

$26,367.68 45 11060 14080 17590 21730 26510 31880 37760 44080

PPS242LMA1-435 7120 9410 12040 15050 18470 22340

$23,267.78 45 8130 10360 13000 16090 19600

PPS328LMA1-435 9650 12650 16110 20050 24500 29490

$24,733.09 45 8650 10900 13520 16630 20230 24260

PPS370LMA1-435 11100 14680 18760 23410 28650 34510

$27,513.90 45 9600 12630 16150 20290 25040 30330

PPS411LMA1-435 12470 16470 21060 26280 32190 38800

$29,494.14 45 10770 14180 18130 22780 28130 34100

Auxiliary Head Cooling Fan Required

ACCESSORIES

Part Number Description Models List Price

KP541-1F KIT HEAD COOLING FAN FACTORY FIT PPS289,328,338,370 & 411 $1,100.46

KP541-1 KIT HEAD COOLING FAN FIELD FIT PPS289,328,338,370 & 411 $551.68

KP541-2F KIT HEAD COOLING FAN FACTORY FIT PPS152,178,205 & 242 $1,090.14

KP541-2 KIT HEAD COOLING FAN FIELD FIT PPS152,178,205 & 242 $510.13




ent

Standard Configurations - Variable Speed (VSD) Models

• 9 Models / 36 Temperature Range Applications

• Medium / High Temp - R134a/R404A/R407F

• Low Temp - R404A/R407F

• True High Ambient (45Deg.C) Condenser Design

• Fail safe fixed speed 50Hz mechanical control backup changeover in the event of failed VSD and/or electrical power supply issue

• Widest operational capacity range .. Nominal Medium Temperature range 6kW to 51kW.

• High quality, with industry recognised VSD brand

• Compressor speed envelope from 30 to 65Hz using standard compressors

• Trax Oil management system installed as part of VSD kit

• Fan speed control fitted as standard (EC fans are available as an option)

• All standard wiring and controls are factory installed and tested

• More accurate balanced load matching with improved efficiency;

• Auto tuning feature ensures optimum smooth constant suction pressure control that maintains a stable storage temperature with less starts and stops of the compressor

• Heatcraft expect Kirby Titan power consumption to reduce by up to 18%

• Factory pre-configured VSD minimises on-site programming and ensures ease of installation & commissioning

• Soft-start feature of VSD reduces compressor starting current by up to 40%

• Kirby Blue Kote Protection to Condenser Coil

UnitAmb. (°C)

MT Capacity Watts Evap Temp°C HT Capacity Watts Evap Temp°C

-20 -15 -10 -5 0 5 10

SELECTION DATA - R134a CAPACITY VSD OPERATION - INHERENT SUBCOOLING, 20°C RETURN GAS

PPS152LMHA1-4 Output 65Hz

35 7930 9930 12190 14730 17560 20680

45 6840 8670 10750 13080 15660 18480

Output 50Hz35 6210 7800 9600 11660 13960 16510

45 5370 6810 8460 10340 12450 14760

Output 30Hz35 4810 5950 7260 8760 10440

45 4220 5260 6450 7810 9330


35 9440 11730 14310 17200 20400 23890

45 8040 10080 12390 14950 17770 20820

Output 50Hz35 7400 9220 11300 13640 16260 19150

45 6310 7920 9760 11840 14160 16690

Output 30Hz35 5700 7020 8530 10250 12170

45 4910 6070 7400 8910 10600

OUTDOOR CONDENSING UNITS (CONT'D)

KIRBY TITAN OUTDOOR SEMI HERMETIC CONDENSING UNIT NOW AVAILABLE WITH OPTIONAL VSD

With the increased demand for higher efficiency and improved capacity control, Kirby now offer a range of Titan Outdoor Semi Hermetic Condensing Units configured with a Variable Speed Compressor Drive kit.

The VSD option ensures excellent load matching to the conditions and stable storage temperatures with less start and stop cycles of the compressor.

Kirby Titan = Ef�ciency

A) EC Fan = up to 5% lower energyB) VSD Comp = up to 18% lower energyC) Stability* = up to 4% lower energyOVERALL ENERGY SAVINGS = up to 27%

Pressure Curve without VSDTemperature Curve without VSD

Pressure Curve with VSDTemperature Curve with VSD

Kirby Titan = Ef�ciency

A) EC Fan = up to 5% lower energyB) VSD Comp = up to 18% lower energyC) Stability* = up to 4% lower energyOVERALL ENERGY SAVINGS = up to 27%

Pressure Curve without VSDTemperature Curve without VSD

Pressure Curve with VSDTemperature Curve with VSD



S1: R

efrig

erat

ion

Eq

uipm

ent

UnitAmb. (°C)

MT Capacity Watts Evap Temp°C HT Capacity Watts Evap Temp°C

-20 -15 -10 -5 0 5 10

SELECTION DATA - R134a CAPACITY VSD OPERATION - INHERENT SUBCOOLING, 20°C RETURN GAS


35 11170 13900 16970 20400 24210 28360

45 9600 12100 14920 18070 21510 25250

Output 50Hz35 8770 10940 13420 16210 19330 22770

45 7540 9510 11770 14320 17160 20260

Output 30Hz35 6780 8360 10160 12210 14500

45 5900 7320 8950 10810 12880

PPS242LMA1-4 Output 65Hz

35 13640 16990 20770 24990 29640 34660

45 11740 14820 18320 22190 26430

Output 50Hz35 10720 13400 16450 19890 23710 27880

45 9240 11670 14480 17640 21140 24930

Output 30Hz35 6630 8320 10260 12490 15010 17810

45 7280 9040 11070 13360 15900


35 13630 17070 20980 25370 30230 35550

45 11710 14840 18410 22380 26740 31480

Output 50Hz35 10680 13410 16540 20090 24070 28460

45 9190 11650 14480 17710 21310 25230

Output 30Hz35 8290 10260 12530 15120 18030

45 7230 8990 11030 13360 15990


35 17440 21650 26360 31590 37320 43550

45 14950 18820 23080 27770 32900 38460

Output 50Hz35 13710 17060 20870 25160 29900 35050

45 11710 14750 18230 22130 26390 30970

Output 30Hz35 8480 10600 13030 15810 18950 22430

45 9200 11380 13880 16710 19840


35 17530 21870 26810 32380 38580 45390

45 15180 19140 23660 28750 34380 40520

Output 50Hz35 13710 17150 21090 25580 30640 36240

45 11900 15010 18600 22700 27300 32360

Output 30Hz35 10570 13050 15910 19170 22860

45 11540 14120 17070 20400


35 20040 24700 29900 35680 42010 48810

45 17300 21570 26280 31450 37110

Output 50Hz35 15760 19500 23750 28500 33720 39400

45 13550 16960 20840 25150 29840 34880

Output 30Hz35 9770 12140 14860 17970 21470 25330

45 8460 10580 13020 15830 18980 22470


35 22110 27420 33350 39940 47160 54970

45 18990 23870 29280 35240 41750 48720

Output 50Hz35 17390 21630 26450 31850 37820 44300

45 14900 18760 23160 28090 33480 39300

Output 30Hz35 10770 13450 16540 20060 24020 28410

45 11700 14470 17640 21230 25190

KIRBY TITAN OUTDOOR SEMI HERMETIC CONDENSING UNIT NOW AVAILABLE WITH OPTIONAL VSD (CONT'D)



ent

UnitAmb. (°C)

LT Capacity Watts Evap Temp°C MT Capacity Watts Evap Temp°C

-35 -30 -25 -20 -15 -10 -5

SELECTION DATA - R404A CAPACITY VSD OPERATION - INHERENT SUBCOOLING, 20°C RETURN GAS


35 4820 6280 7980 9950 12210 14750 17500

45 3770 5000 6420 8090 10010 12160 14440

Output 50Hz35 4950 6310 7900 9740 11830 14160

45 3970 5100 6430 7990 9780 11740

Output 30Hz35 3940 4970 6160 7540 9100

45 4070 5070 6220 7540


35 5930 7650 9620 11890 14490 17370 20480

45 4630 6080 7750 9690 11900 14320 16870

Output 50Hz35 4620 6000 7580 9400 11480 13840 16450

45 4670 5950 7430 9140 11070 13170

Output 30Hz35 4730 5920 7280 8850 10620

45 4720 5830 7110 8540


35 7120 9210 11590 14300 17360 20710 24310

45 5590 7360 9370 11680 14270 17070 19980

Output 50Hz35 5560 7230 9130 11310 13800 16570 19620

45 5640 7190 8960 10990 13240 15670

Output 30Hz35 5710 7140 8770 10640 12730

45 5700 7020 8520 10210


35 8350 10720 13460 16570 20050 23840 27880

45 6360 8410 10810 13510 16460 19610 22870

Output 50Hz35 6610 8490 10670 13190 16050 19230 22710

45 6740 8560 10690 13140 15870 18790

Output 30Hz35 6700 8330 10200 12320 14700

45 6810 8380 10170 12190


35 8710 11310 14310 17750 21650 25990 30730

45 6700 8920 11520 14470 17750 21320 25130

Output 50Hz35 6860 8940 11330 14100 17280 20870 24840

45 7140 9120 11440 14130 17160 20480

Output 30Hz35 7090 8890 10970 13350 16040

45 7230 7260 8980 10970 13230


35 11290 14540 18270 22490 27170 32260 37640

45 8600 11460 14730 18330 22230 26370

Output 50Hz35 8940 11530 14520 17940 21810 26090 30750

45 9140 11630 14540 17840 21460 25310

Output 30Hz35 9150 11380 13940 16820 20030

45 7400 9270 11400 13830 16550


35 11520 14830 18620 22970 27940 33500 39590

45 8890 11630 14850 18610 22910 27680 32810

Output 50Hz35 11710 14760 18270 22300 26880 31980

45 9260 11800 14760 18220 22180 26570

Output 30Hz35 11490 14130 17140 20560

45 11490 14130 17140 20560


35 12910 16630 20860 25590 30790 36380 42190

45 9940 13260 16970 20980 25270 29780




S1: R

efrig

erat

ion

Eq

uipm

ent

UnitAmb. (°C)

LT Capacity Watts Evap Temp°C MT Capacity Watts Evap Temp°C

-35 -30 -25 -20 -15 -10 -5

SELECTION DATA - R404A CAPACITY VSD OPERATION - INHERENT SUBCOOLING, 20°C RETURN GAS

Output 50Hz35 10240 13190 16590 20470 24830 29610 34740

45 8040 10520 13400 16710 20420 24430 28610

Output 30Hz35 8260 10470 13010 15910 19170 22780

45 8520 10650 13090 15840 18910


35 14240 18340 23020 28300 34140 40440 47050

45 10930 14530 18620 23150 28050 33240 48720

Output 50Hz35 11270 14540 18300 22590 27430 32780 38570

45 11570 14730 18390 22530 27070 31870

Output 30Hz35 11520 14330 17530 21140 25160

45 9360 11710 14400 17440 20850

UnitAmb. (°C)

LT/MT Capacity Watts Evap Temp°C

-25 -20 -15 -10 -5 0 5

SELECTION DATA - R407F CAPACITY VSD OPERATION - INHERENT SUBCOOLING, 20°C RETURN GAS


35 7637 9724 12123 14851 17905 21267 24905

45 6599 8370 10456 12924 15776 18949

Output 50Hz35 5976 7644 9559 11751 14238 17026 20098

45 5164 6580 8245 10227 12545 15170 18019

Output 30Hz35 4717 5938 7353 8975 10813 12862

45 4060 5122 6399 7908 9634 11532


35 8829 11259 14054 17222 20748 24605 28754

45 7592 9705 12171 15016 18239

Output 50Hz35 6921 8853 11071 13603 16460 19648 23159

45 5989 7624 9546 11807 14399 17283

Output 30Hz35 5479 6899 8523 10368 12448 14778

45 4773 6013 7423 9036 10877 12956


35 10145 12942 16151 19778 23806 28209 32951

45 8729 11152 13975 17228 20908

Output 50Hz35 7950 10171 12722 15634 18913 22556 26557

45 6888 8765 10966 13553 16517 19812

Output 30Hz35 6291 7922 9790 11912 14306 16985

45 5477 6907 8529 10384 12495 14874


35 11998 15306 19108 23390 28113

45 10312 13233 16646 20515

Output 50Hz35 9411 12041 15048 18474 22341

45 8127 10359 12999 16087 19598

Output 30Hz35 7472 9398 11599 14097

45 6508 8182 10095 12293


35 14393 18414 22995 28136 33828 40068 46865

45 12302 15934 20049 24644 29730

Output 50Hz35 11298 14454 18082 22218 26874 32050 37752

45 9773 12446 15586 19266 23475 28158

Output 30Hz35 8946 11263 13916 16931 20333 24140

45 7792 9815 12117 14754 17760 21149





ent

UnitAmb. (°C)

LT/MT Capacity Watts Evap Temp°C

-25 -20 -15 -10 -5 0 5


35 16169 20497 25427 30961 37080

45 13926 17194 21083 25565

Output 50Hz35 9652 12653 16113 20051 24498 29485

45 10897 13516 16625 20229 24261

Output 30Hz35 9943 12456 15329 18586

45 8341 10328 12657 15293


35 16290 20758 25896 31735 38247 45384 53119

45 14140 17910 22304 27462 33343

Output 50Hz35 12747 16318 20421 25111 30414 36334 42868

45 11064 14078 17588 21729 26514 31883

Output 30Hz35 10070 12685 15712 19171 23074 27433

45 8688 10926 13597 16713 20247 24163


35 18691 23843 29638 36051 43063

45 16122 20776 25962 31687

Output 50Hz35 14676 18764 23407 28648 34509

45 12634 16154 20292 25041 30326

Output 30Hz35 9081 11682 14669 18081 21944 21944

45 10168 12763 15744 19154


35 20976 26770 33307 40556 48485

45 18086 23328 29182 35650

Output 50Hz35 16472 21057 26280 32188 38805

45 14181 v18127 22776 28129 34103

Output 30Hz35 10181 13086 16450 20291 24639

45 11317 14266 17670 21542

TITAN VSD CONFIGURATION ORDER DETAILS

Titan Part Number

ADD Respective VSD kit part number (Factory fitted to Titan)

R134a MT/HT R404A LT/MT R407F LT/MT

PPS152LMHA1-4 KP541-23F KP541-31F KP541-31F



PPS242LMA1-4 KP541-24F KP541-32F KP541-32F










S1: R

efrig

erat

ion

Eq

uipm

ent

ACCESSORIES


PPS152LMHA1-4 CDU TITAN 15.2KW S/H LMH $19,870.22



PPS242LMA1-4 CDU TITAN 24.2KW S/H LM $23,267.78




PPS370LMA1-4 CDU TITAN 37KW S/H LM $27,513.90


KP541-23F VSD KIT TITAN 2FAN 7.5KW R134A $6,182.51

KP541-24F VSD KIT TITAN 3FAN 11KW R134A $7,864.42



KP541-31F VSD KIT TITAN 2FAN 7.5KW R404A $6,059.94

KP541-32F VSD KIT TITAN 3 FAN 11KW R404A $7,419.27




KP541-1F KIT HEAD COOLING FAN FACTORY FIT - PPS289,328,338,370 & 411 $1,100.46

KP541-1 KIT HEAD COOLING FAN FIELD FIT - PPS289,328,338,370 & 411 $551.68

KP541-2F KIT HEAD COOLING FAN FACTORY FIT - PPS152,178,205 & 242 $1,090.14

KP541-2 KIT HEAD COOLING FAN FIELD FIT - PPS152,178,205 & 242 $510.13

Kirby Commander VSD Kirby Titan VSD



ent

KIRBY CENTURION PACKAGED CONDENSING UNIT

The Kirby Centurion Condensing Unit provides an all-in-one solution for the commercial refrigeration and air conditioning sectors that require larger capacity systems. It offers the benefits of quick installation turnaround and energy efficiencies are gained from advanced technologies within the compressor and air cooled condenser.

Designed as a smart solution for convenience stores, liquor stores, cold storage applications, control environment preparation rooms and also for the non-food industry, the Kirby Centurion showcases Heatcraft local know how in providing efficient, environmentally friendly and reliable cooling solutions for the Australasian market place.

Kirby Centurion Condensing Units offer:

• High capacity & extreme operating envelope

• R134a, R404A, R407C/F & R507 applications

• New Dorin semi hermetic “H” series compressor – advanced technology

• New Kirby remote condenser (horizontal air flow) – Optimised coil design & Kirby Blue Koted fins

• Fan speed control fitted as standard (EC fans are available as an option)

• System safety controls - including voltage phase protection

• Oil Management System

• Matched liquid receiver (powder coated finish) c/w pressure relief valve

• Weather resistant metal base

• Powder coated compressor unit panels ( IP rated )

• Condensing unit is pre-wired to assist with installation

• Easy to service – removable access panels

• Common footprint design & mounting/services connection points – easier pre-install planning

• Fast installation

• All compressors are pre-wired for part wind start (PWS)

Ultimate reliability comes standard when you choose Kirby - trusted to handle the extremes of our climate.

Product NumberAmb.(°C)

MT HT Rec'r Cap.in

kgList

Price-40 -35 -30 -25 -20 -15 -10 -5 0 5 10

R404A Medium/High Temperature

PPS332LMHA1-2 H1501CC 3 Fan Cond.

30 10,110 12,840 16,030 19,740 24,020 28,880 34,310 40,240 46,580 53,200

32.9 $38,821.72 35 8,960 11,580 14,600 18,080 22,090 26,640 31,720 37,280 43,220 49,420

40 8,030 10,370 13,120 16,340 20,050 24,250 28,910 33,940 39,230 44,560

45 7,000 9,170 11,620 14,510 17,910 21,820 26,150 30,750 35,410

PPS372LMA1-2 H1501CS 3 Fan Cond.

30 11,410 14,570 18,250 22,490 27,300 32,660 38,500

32.9 $39,046.05 35 10,210 13,210 16,660 20,610 25,070 30,010 35,380

40 9,210 11,950 15,150 18,810 22,930 27,470 32,370

45 7,860 10,410 13,450 16,900 20,710 24,820 29,190


30 11,600 14,840 18,580 22,910 27,880 33,500 39,750 46,570 53,870 61,530

32.9 $40,900.59 35 10,430 13,500 17,020 21,080 25,720 30,960 36,770 43,100 49,850 56,860

40 8,760 12,000 15,400 19,160 23,390 28,180 33,480 39,200 45,150 51,080

45 8,090 10,580 13,600 17,120 21,100 25,490 30,260 35,310 40,510


30 12,830 16,420 20,580 25,360 30,760 36,800 43,420

32.9 $41,102.26 35 11,540 14,930 18,850 23,330 28,380 34,010 40,160

40 9,980 13,360 17,050 21,170 25,790 30,930 36,560

45 9,030 11,840 15,080 18,840 23,120 27,870 32,950


30 12,780 16,320 20,430 25,190 30,660 36,820 43,640 51,020 58,840 66,930

32.9 $41,540.79 35 11,450 14,830 18,710 23,180 28,290 34,030 40,370 47,240 54,510 62,020

40 10,270 13,370 16,940 21,060 25,750 31,000 36,770 42,940 49,320 55,640

45 8,880 11,580 14,930 18,830 23,230 28,060 33,250 38,710 44,300




S1: R

efrig

erat

ion

Eq

uipm

ent

KIRBY CENTURION PACKAGED CONDENSING UNIT (CONT'D)


MT HT Rec'r Cap.in

kgList

Price-40 -35 -30 -25 -20 -15 -10 -5 0 5 10


30 14,940 19,040 23,720 29,050 35,080 41,820 49,260

32.9 $44,199.78 35 13,520 17,310 21,650 26,620 32,240 38,500 45,330

40 12,120 15,600 19,600 24,210 29,440 35,220 41,460

45 10,690 13,860 17,520 21,760 26,580 31,880 37,490


30 14,140 18,450 23,370 28,990 35,400 42,610 50,640 59,420 68,860 78,770

75.0 $57,125.11 35 12,850 16,880 21,440 26,660 32,590 39,270 46,660 54,670 63,170 71,960

40 15,320 19,530 24,340 29,820 35,970 42,730 49,990 57,570 65,260

45 13,740 17,590 21,980 26,990 32,600 38,710 45,180 51,800 58,330

PPS543LMA1-2 H2500CS

30 16,710 21,430 26,810 32,950 39,880 47,630 56,170

75.0 $60,128.66 35 15,220 19,560 24,510 30,170 36,580 43,710 51,500

40 13,750 17,710 22,220 27,420 33,310 39,840 46,890

45 12,250 15,830 19,900 24,620 29,980 35,880 42,180


30 16,210 21,000 26,500 32,780 39,930 47,950 56,840 66,530 76,920 87,790

75.0 $58,110.69 35 14,710 19,200 24,300 30,130 36,750 44,170 52,330 61,140 70,450 80,030

40 17,410 22,120 27,500 33,610 40,430 47,880 55,820 64,080 72,390

45 15,590 19,900 24,830 30,410 36,610 43,320 50,370 57,510


30 22,050 28,460 35,870 44,310 53,840 64,530 76,420

75.0 $63,518.73 35 20,110 26,040 32,840 40,620 49,430 59,320 70,260

40 23,640 29,840 36,960 45,070 54,170 64,180

45 21,200 26,790 33,240 40,620 48,910 57,970


30 21,290 27,790 35,320 43,970 53,790 64,800 77,040 90,490 105,050 120,420

75.0 $69,294.33 35 25,480 32,450 40,440 49,520 59,710 71,010 83,340 96,530 110,270

40 23,190 29,610 36,940 45,290 54,680 65,060 76,290 88,140 100,290

45 26,730 33,380 40,990 49,550 58,980 69,060 79,500 89,970


30 24,060 31,060 39,060 48,160 58,430 69,970 82,840

75.0 $68,574.50 35 21,980 28,450 35,850 44,300 53,870 64,570 76,380

40 19,910 25,860 32,660 40,480 49,360 59,240 70,010

45 23,230 29,420 36,590 44,760 53,800 63,490


30 24,380 31,560 39,780 49,200 59,890 71,900 85,170 99,580 114,920 130,850

75.0 $66,772.95 35 22,180 28,910 36,540 45,270 55,170 66,260 78,440 91,530 105,280 119,310

40 26,280 33,330 41,370 50,500 60,680 71,790 83,590 95,780 107,960

45 23,610 30,070 37,410 45,740 54,990 64,990 75,450 86,000


30 28,750 37,070 46,560 57,340 69,520 83,120 98,110

75.0 $66,650.11 35 25,990 33,680 42,460 52,500 63,860 76,480 90,230

40 23,250 30,310 38,400 47,710 58,250 69,910 82,450

45 26,890 34,270 42,830 52,550 63,210 74,490

Notes: Notes: Ratings given are nominal values ± 5% based on Calorimeter tests at the conditions given below. Inherent Sub cooling, 20°C Return Gas

For a complete range of ancillary "KP Kits", view the product brochure at www.heatcraft.com.au, or contact your local Heatcraft branch on 13 23 50



ent


LT MT HTRec'r Cap.in

kgList

Price-30 -25 -20 -15 -10 -5 0 5 10

R134a Medium/High Temperature


30 11,620 14,840 18,480 22,650 27,400 32,750 36,760

38.1 $38,821.72 35 10,850 13,930 17,440 21,450 25,990 31,100 34,700

40 10,010 13,000 16,360 20,170 24,480 29,320 32,750

45 9,220 12,010 15,210 18,850 22,980 27,620 43,150


30 13,740 17,280 21,310 25,910 31,100 36,850 40,910

38.1 $39,046.05 35 12,810 16,210 20,090 24,490 29,420 34,890 38,470

40 11,890 15,100 18,780 22,950 27,620 32,800 36,230

45 10,780 13,870 17,410 21,400 25,870 30,830 45,460


30 13,350 17,200 21,520 26,470 32,100 38,440 43,070

38.1 $40,900.59 35 12,460 16,080 20,220 24,960 30,340 36,380 40,510

40 11,540 14,980 18,900 23,380 28,480 34,190 37,260

45 10,320 13,570 17,260 21,450 26,160 31,430 49,530


30 15,370 19,470 24,150 29,490 35,510 42,210 46,940

38.1 $41,102.26 35 14,300 18,240 22,730 27,830 33,570 39,940 44,130

40 13,230 16,960 21,230 26,060 31,500 37,540 41,490

45 11,910 15,500 19,650 24,310 29,510 35,240 49,450


30 14,880 18,990 23,640 28,970 35,030 41,870 47,050

38.1 $41,540.79 35 13,920 17,860 22,340 27,450 33,270 39,800 44,440

40 12,950 16,720 20,980 25,850 31,380 37,580 41,970

45 11,870 15,430 19,550 24,230 29,530 35,440 57,810


30 16,590 21,680 27,410 33,840 41,020 48,990 54,610

38.1 $44,199.78 35 15,340 20,140 25,590 31,730 38,590 46,200 51,410

40 14,100 18,610 23,760 29,610 36,160 43,410 48,200

45 12,850 17,080 21,940 27,500 33,730 40,630 62,950

PPS373MHA1-2 H2500CS R134a ONLY 3 Fan Cond.

30 19,900 25,370 31,450 38,220 45,730 53,990 59,430

38.1 $46,443.48 35 18,530 23,730 29,530 35,980 43,120 50,940 55,910

40 17,170 22,090 27,600 33,740 40,500 47,890 52,400

45 15,800 20,450 25,680 31,500 37,890 44,830 84,870

PPS492MHA1-2 H3000CS 3 Fan Cond.

30 19,170 25,770 33,140 41,400 50,650 60,970 72,400 79,390

71 $58,785.37 35 17,370 23,500 30,400 38,240 47,070 56,870 67,630 73,910

40 15,560 21,240 27,660 35,080 43,500 52,770 62,860 68,440

45 18,970 24,910 31,930 39,920 48,680 58,090 98,780


30 22,550 30,060 38,460 47,940 58,650 70,690 84,080 93,060

71 $68,574.50 35 28,130 36,040 45,000 55,140 66,540 79,190 87,350

40 26,200 33,620 42,060 51,640 62,390 74,300 81,630

45 24,260 31,200 39,110 48,130 58,240 69,410 116,420


30 26,370 35,360 45,430 56,760 69,490 83,680 99,340 109,630

71 $66,650.11 35 24,440 32,930 42,410 53,120 65,200 78,650 93,470 102,830

40 30,500 39,390 49,490 60,910 73,630 87,600 96,040

45 28,080 36,370 45,860 56,620 68,600 81,730

Inherent Subcooling 20 °C return Gas|For a complete range of ancillary "KP Kits", view the product brochure at www.heatcraft.com.au, or contact your local Heatcraft branch on 13 23 50.

KIRBY CENTURION PACKAGED CONDENSING UNIT (CONT'D)



S1: R

efrig

erat

ion

Eq

uipm

ent

All models have been upgraded with new electronic thermostat controls. Larger models come complete with 10 metres of control lead that allows for remote touch pad to be mounted near the coolroom door - smaller models have the controller mounted on the unit.

Part NumberAmb.

°C Nom. HPCapacity Watts @ +2°C

Room TempRefrig.

Charge (gms)Evap. Fan Air

Flow L/S Volts

(Amps)List

Price

KPC Series Low Profile R134a Medium Temperature

KPC800-6 30 1/3 810 > 630 910 165 240/1 (3.9) $3,680.72

KPC1000-6 30 3/8 1070 > 840 1000 235 240/1 (4.4) $4,086.99

KPC1400-6 30 5/8 1460 > 1180 1190 270 240/1 (4.6) $4,802.91

KPC1700-6 3/4 1670 > 1360 1190 270 240/1 (6.4) $5,558.64

KSC Series Standard Range R134a Medium Temperature

KSC2000-6 30 1 2140 > 1740 1710 388 240/1 (5.8) $6,284.99

KSC2700-6 30 1 1/4 2780 > 2170 1990 750 240/1 (8.7) $8,399.52

KSC3500-6 30 1- 1/2 3520 > 2800 2420 760 240/1 (9.7) $8,861.21 *Kirby Drop In Units are supplied complete "ready to run" including 240v 1 phase 15A power cord - except 3PH KSFT2600-4

The Kirby Drop-in Packaged Refrigeration Units offer:

• Evaporator coil corrosion protection, pressure safety control and Dixell electronic thermostat control on all units.

• Medium Temperature Units feature off cycle defrost only

• Low Temperature Units feature real time electric defrost with temperature switch termination and a low pressure safety switch

• All models use foam insulation that is CFC-free

• New and improved slimline electrical box

• All units are ready to install straight from the box

• Medium Temperature Units now designed for R134a with TX valve fitted

• All units designed for reduced refrigerant charge

• All units fitted with Dixell XW60K thermostats with 3 different temperature probes (one evaporator coil, one for the condenser coil and one for the room temperature)

• Larger models have additional cable to remotely mount the electronic controller

• All tubes in the top half of the drop-in units have been redesigned to enhance performance and reliability

• All units use tube support sleeves and saddles at drier to reduce vibration and noise.

Notes

• Qualified refrigeration professionals should supervise initial selection and commissioning

DROP-IN PACKAGED UNITS

KIRBY PACKAGED SYSTEMS - DROP-IN UNITS

Features & Benefits

KIRBY PACKAGED SYSTEMS - DROP-IN UNITS (CONT'D)

Part NumberAmb.

°C Nom. HPCapacity Watts

@ -18°C Room TempRefrig.

Charge (gms)Evap. Fan Air

Flow L/S Volts (Amps) List Price

KPF Series Low Profile R507 / R404A Low Temperature

KPF1000-4 30 > 43 3/4 841 > 548 975 235 240/1 (4.2) $6,689.05

KPF1200-4 30 > 45 1 1031 > 671 820 235 240/1 (6.7) $7,615.00

KSF Series Standard Range R507 / R404A Low Temperature

KSF1500-4 30 > 45 1-1/4 1368 > 687 1450 530 240/1 (6.9) $7,999.50

KSF2000-4 30 > 45 1-1/2 1765 > 1147 1500 750 240/1 (10.6) $10,839.60

KSFT2600-4 30 > 45 2 2277 > 1481 1700 820 415/3 (6.4/ph) $12,356.09

Electronic controls on all units

- larger models have additional cable

to mount the control at the door



ent

Part Number DescriptionCapacity

Glasses / HrDimensions

WxDxH List Price

Free Standing Upright Models

60831 Stainless Steel, With Bubbler 60

350 x 350 x 903

$2,863.49

68831 Stainless Steel, With Bubbler 90 $2,863.49

62831 Stainless Steel, With Bubbler 160 $2,930.47

60833 Stainless Steel, With Bubbler & Glass Filler 60 $3,086.77



68838 Stainless Steel with Bubbler, Glass Filler, Filter & Surge Protector 90 $3,935.20

Under Bench Models

63802 With Bubbler and Glass Filler 160 348 x 348 x401 $2,394.24

63807 With Bubbler, Glass Filler & Filter 160 348 x 348 x401 $2,874.64

Common Spare Parts

107710 Bubbler Assembly - All Models $265.98

81001 In Line Filter $339.84

Z-3019 GLASS FILLER Z-3019 $213.47

90224 Thermostat - All Models $191.47

GH00020 FAN MOTOR GLASS CHILLER $726.04

11-55299-01 FILTER HSG AP11S OPAQUE $313.15

107711 CARTRIDGE SUIT KELV BUBBLER $139.14

AP110 FILTER CARTRIDGE AP110 2PK $116.68

778818 BLK HNDLE-GOOSENECK TAP 778818 $39.94

TEMPRITE WATER COOLERS

Features

• All models charged with HFC R134a Refrigerant

• Anti-surge protection on filtered models includes:

– Pressure relief valve rated at 750 kPa

– Open vented style glass filler

– Pressure relief via glass filler to drain

• All main certifications including:

– Quality endorsements (AS & ISO)

– C tick approved

– Plumbing approvals (Type Tested)

– Electrical approvals (CE approved)



S1: R

efrig

erat

ion

Eq

uipm

entZANUSSI ICE MACHINES

Think about it, you can tell a lot about a business by the ice it serves. Perfect drinks start with perfect ice. Here’s 10 reasons why to choose ZANUSSI Ice machines;

• Crystal clear ice cubes

• Easy Installation

• Simple thermostat operation

• No PC boards

• Electromechanical

• 2 years warranty – parts & labour

• 15,000 Zanussi style ice machines currently operating in Australia

• Suitable for high temperature environments

• Parts available from leading refrigeration wholesalers nationwide

• HACCP compliant – easy clean

• Salad Bar: 2.2kg per 1kg of produce

• Ice Bucket: 3kgs per ice bucket approximately

• Packed ice 2.5- 5kgs per bag x number of bags sold per day

• Supermarket display Ice: 500kg per square metre 100mm high

Part Number Cube Type TypeIce Produced

(kg/24hr)

Dimensions (mm)

W x D x H List Price

CIM24A 18G CUBE SELF CONTAINED 21 345 x 400 x 590 $2,207.08 CIM 29A 18G CUBE SELF CONTAINED 28 390 x 460 x 690 $2,664.82 CIM 38A 18G CUBE SELF CONTAINED 33 500 x 580 x 800 $3,045.50 CIM 50A 18G CUBE SELF CONTAINED 46 500 x 580 x 910 $3,346.88 CIM 67A 18G CUBE SELF CONTAINED 65 738 x 600 x 920 $4,350.72 CIM 85A 18G CUBE SELF CONTAINED 80 738 x 600 x 920 $4,774.46 FIM 94A FLAKER SELF CONTAINED 90 550 x 660 x 800 $5,653.67 229UJO FLAKER SELF CONTAINED 90 550 x 660 x 800 $5,868.94 CIM143AS 18G CUBE SELF CONTAINED 130 840 x 740 x 1075 $6,933.96 ZAN 350A 7GM HEAD ONLY 140 540 x 544 x 747 $5,746.58

CB1565 13GM SELF CONTAINED 155 840 x 740 x 1075 $8,719.98

ZAN 500A 7GM HEAD ONLY 200 770 x 550 x 805 $7,004.21 ZANG 250A FLAKER HEAD ONLY 250 640 x 470 x 700 $8,724.10 ZAN 900A 7GM HEAD ONLY 400 770 x 550 x 805 $9,188.63 ZANG 500A FLAKER HEAD ONLY 500 640 x 700 x 700 $10,536.90 BIN 200 ICE BIN BIN ONLY - 870 x 790 x 1000 $3,183.73 BINT 350 YM9 ICE BIN BIN ONLY - 1250 x 790 x 1000 $4,894.56 ZAN 1700 7GM HEAD ONLY 770 1250 x 645 x 950 $22,018.72

APPROXIMATE QUICK REFERENCE SIZING GUIDE BY CUSTOMER VOLUME

Application: (Daily ice use) Customers: (figures inclue 20% safety factor)

100 250 500 1000

Restaurant: 608grams ice per meals sold 82kg 205kg 410kg 820kg

Cocktail Bar: 1.3kg ice per seat 163kg 408kg 816kg 1632kg

Beverage Only: 142grams per (10oz) 285ml cup 17kg 43kg 85kg 170kg

Beverage Only: 170grams per (12oz) 340ml glass/cup 20kg 51kg 102kg 204kg



Hotel/Function Catering: 454grams per person 54kg 136kg 272kg 544kg

Hospitals: 4.5grams per patient 544kg 1361kg 2722kg 5444kg

Cafeteria: 454grams per person 54kg 136kg 272kg 544kg

Catering: 450grams per person 45kg 112.5kg 225kg 450kg

MISCELLANEOUS QUICK REFERENCE GUIDE



ent


Ice Production*

(kgs)

Ice Storage

(kgs) Ice Type Power SupplyDimensions

(mm) H x W x D List Price

The Little GuysSuited to on-the-spot installations at coffee shops, stadium boxes, refreshment break areas, or wherever limited ice needs require equipment with a small footprint.

EC30 Includes Ice Bin 25 10 Octagon 10A/1ph 651 x 450 x 475 $2,771.11

EC50 Includes Ice Bin 39 25 Octagon 10A/1ph 858 x 550 x 550 $3,529.52

EC80 Includes Ice Bin 60 44 Octagon 10A/1ph 960 x 700 x 600 $4,550.46 QM45 Includes Ice Bin 40 14 Dice 10A/1ph 942 x 500 x 567 $4,565.04 U140 Includes Ice Bin 55 40 Dice/Half Dice 10A/1ph 978 x 660 x 711 $5,042.52 U190 Includes Ice Bin 79 36 Dice/Half Dice 10A/1ph 978 x 660 x 711 $5,332.32 U240 Includes Ice Bin 87 36 Dice/Half Dice 10A/1ph 978 x 660 x 711 $5,868.45

U310 Includes Ice Bin132 Dice

135 Half Dice 120 Regular

45 Dice/Half Dice/Regular 10A/1ph 978 x 762 x 711 $6,882.75

To Fit Tight SpacesUse these slender 55.9 cm wide models to save valuable floor space.

I322 Head Only134 Dice /

140 Half Dice~ Dice/Half Dice 10A/1ph 546 x 558 x 622 $5,892.26


194 Half Dice~ Dice/Half Dice 10A/1ph 546 x 558 x 622 $6,183.96

Our Regular MachinesIdeal for restaurants, hotels, motels, and a wide variety of commercial applications. The most popular size for mounting on storage bins, or floor-standing dispensers.

I450 Head Only 168 ~ Dice 10A/1ph 546 x 762 x 622 $6,183.96 I500 Head Only 270 ~ Regular 10A/1ph 546 x 762 x 622 $7,187.04 I606 Head Only 253 ~ Dice/Half Dice 15A/1ph 546 x 762 x 622 $8,288.28 I906 Head Only 381 ~ Dice/Half Dice/Regular 15A/1ph 673 x 762 x 622 $11,128.32


403 Half Dice ~ Dice/Half Dice 15A/1ph 673 x 762 x 622 $11,842.86


481 Half Dice~ Dice/Half Dice

20A/1ph (hard wired)

749 x 762 x 622 $12,659.61

The Big Guys

121.9cm ice machine models are perfect for fast-food outlets, full-service restaurants, institutional kitchens, cafeteria's, and other food service operations requiring continuous large-volume ice production.

I1400 Head Only600 Dice



673 x 1219 x 622 $13,257.58

I1800 Head Only736 Dice



749 x 1219 x 622 $17,083.71

S3070 Head Only 1203 ~ Dice 25A/1ph (hard wired) 749 x 1219 x 622 $40,890.78

Manitowoc

MANITOWOC ICE MACHINES

No one knows ice better than Manitowoc.

Building the perfect ice machine wasn't easy, but inside-of-the-box thinking is just what you've come to expect from Manitowoc®. Manitowoc has combined intuition and innovation for the perfect ice machine. Manitowoc call it Indigo, you'll call it "ice assurance" because you'll never have to worry about ice again.

The Indigo™ un-complicates everything about the ice making process. State-of-the-art diagnostics provide constant and reliable monitoring of refrigeration systems. In turn, that information is used to improve energy management, set proper ice production levels, streamline cleaning processes, ease food safety concerns, maintain ice quality, and quickly display up-to-date service information.

No one knows ice better than Manitowoc, that's why all you need to know is that with the Indigo, great tasting ice will be waiting for you when you need it most.



S1: R

efrig

erat

ion

Eq

uipm

ent

Flake IceFlake ice is small hard bits of ice ideally suited for any “contact” presentation. It forms completely around the contact item and cools quickly.

RF0266A Includes Ice Bin 77 27 Flaker 10A/1ph 978 x 660 x 673 $8,677.96 RF0385A Includes Ice Bin 152 40 Flaker 10A/1ph 1003 x 738 x 690 $7,955.01 RF0644A Includes Ice Bin 312 54 Flaker 10A/1ph 1167 x 741 x 678 $10,403.82 RFS0300A Head Only 174 ~ Flaker 15A/1ph 660 x 559 x 600 $7,607.25 RFS0650A Head Only 290 ~ Flaker 15A/1ph 660 x 559 x 600 $8,795.43 RFS1200A Head Only 545 ~ Flaker 15A/1ph 696 x 760 x 600 $12,635.28 RF2300A Head Only 1039 ~ Flaker 15A/1ph 700 x 944 x 683 $24,502.59 Ice BinsInternal scoop holder stays above ice line, promoting easy access and better sanitation. Bin door holds open while in use via a patented hinge pin design.

BIN A320 Suit I322 ~ 95 ~ ~ 1117 x 559 x 864 $2,056.46

BIN A400Suit I450 & I500

~ 132 ~ ~ 1117 x 762 x 864 $2,231.47

BIN A420Suit I322 & I422

~ 141 ~ ~ 1422 x 559 x 864 $2,390.85

BIN A570Suit I450

up to I1200~ 195 ~ ~ 1422 x 559 x 864 $2,639.85

K-00365Adaptor Plates for A570 Bin

~ ~ ~ ~ ~ $318.78

BIN A970Suit S850

up to S1800~ 322 ~ ~

1422 x 1219 x 864

$3,821.22

K-00370 Adaptor Plates for A970 Bin

~ ~ ~ ~ ~ $478.17

BIN F700Suit RF2300,

S1400, S1800~ 308 ~ ~ 1485 x 762 x 787 $7,273.98

BIN F1300Suit RF2300,

S1400, S1800~ 600 ~ ~

1612 x 1219 x 787

$9,830.16

Water FiltersConditions incoming water, reduces machine cleaning frequency and service costs, maximises equipment performance, and improves ice quality.

*Kilos produced per day. Approximate ice-making capacity based on air-cooled condenser unit. Nominated production is based on 21˚C air / 10˚C water

BR10 Suit EC, QM, U, I Series to I906 $289.80 BR20 Suit I906 to S3070 $347.76 BR30 Suits larger machines in extremely poor water areas $637.56 * Kilos produce per day. Approximate ice-making capacity based on air cooled condensing unit. Nominated production is based on 21°C air/10°C water.

MANITOWOC ICE MACHINES (CONT'D)

Manitowoc

Indigo Series Ice Machines:Intelligent thinking inside the box.

Now available from Heatcraft. Contact 13 23 50 for more information on the Manitowoc Range of Ice Makers.



S1: R

efrig

erat

ion

Eq

uipm

ent

EVAPORATORS

KIRBY CABINET COOLERS


Capacity W @ 6KTD

List PriceR404A R22

Low Temperature

KF450 CAB COOLER (LOW TEMP) 470 440 $1,231.43




KF1380 UNIT COOLER (LOW TEMP) 1470 1380 $2,258.91

KF1650 UNIT COOLER (LOW TEMP) 1710 1650 $2,393.34


Capacity W @ 6KTD

List PriceR404A R22 R134a

Medium Temperature

KC301 CAB. COOLER (NORM TEMP) 360 310 320 $517.61




KC750 CAB. COOLER (NORM TEMP) 850 770 700 $1,016.66



KC1350 CAB. COOLER (MED TEMP) 1580 1420 1220 $1,674.42



Twin Blow

KCT400 CAB. COOLER (N/TEMP) TWIN 510 450 420 $923.97

KCT600 CAB. COOLER (N/TEMP) TWIN 730 650 550 $1,041.39





Evaporators & Condensers

With a smart and functional design, Heatcraft has delivered a range of Cabinet Coolers to give you more top shelf cabinet space and greater cabinet storage capability. With low noise levels, the Kirby Cabinet Coolers are efficient as well as inconspicuous.

Features

• Compact, low profile design which gives more shelf space

• Slim, neat profile for maximum cabinet storage space

• Removable, discreet drain tray which is easily removed for cleaning and service

• Heat exchanger with rifled bore tubing for high performance and exceptional oil return

• Fan motors which can be easily removed for servicing

• E-Kote coil protection for protection against the elements (medium temperature coolers only)

• Larger capacity twin blower coolers, suitable for larger sized cabinets

• Suitable for high and medium temperature applications where a defrost heater is not required


Indigo Series Ice Machines:Intelligent thinking inside the box.

Now available from Heatcraft. Contact 13 23 50 for more information on the Manitowoc Range of Ice Makers.



ent

THE KIRBY 9000 SERIES EVAPORATOR - A HEATCRAFT SMART SOLUTION WHICH USES LESS ENERGY.

Part Number

Capacity W @ 6KTD

AirFans Qty

Motors (Max) 1 Phase Refrigerant Charge*

Nett Weight

(kg)List

PriceFlow (l/s)

Throw (m)R404A R134a watts amps R507 R404A R22

Medium Temperature - 300mm Fan Diameter

KMT013W 1320 1150 380 8.5 1 73 0.32 0.54 0.53 0.59 9.4 $1,265.16

KMT016W 1620 1410 360 8 1 73 0.32 0.75 0.74 0.82 10.3 $ 1,301.86

KMT020W 2010 1750 340 7.5 1 73 0.32 1.09 1.07 1.19 11.5 $1,409.77

KMT027W 2700 2350 760 12 2 146 0.64 1.04 1.02 1.14 15.1 $1,709.49

KMT034W 3400 2960 720 11.5 2 146 0.64 1.54 1.52 1.69 16.9 $1,958.65

KIRBY SERIES 9000 EVAPORATORS

Traditional evaporators feature a company coil design which blocks quickly and needs more defrost heat to remove ice build up. Having less fin area requires the fin to run colder and this means more moisture removal, more ice formation and more frequent defrosting.

The Kirby 9000 Series Evaporator was specifically designed to overcome these problems. This low frost innovation uses a unique fin pattern to minimise latent load and maximise sensible load. Enhanced fin configuration means less moisture removal and vastly improved run times before ice formation.

Smart coil design means the coil loses less airflow as ice builds up, due to the larger ratio of fin surface to tube surface. This results in more stable room conditions between defrosts and allows the coil to hold ice for longer between defrosts.

The result is an evaporator with greater efficiency and longer time between defrosts.

Operating on a lower temperature differential, the Kirby 9000 Series Evaporator uses less defrost heater wattage (up to 15% less than conventional models) which reduces energy consumption and can deliver substantial cost savings over the full life of the unit.


KMT models are now available with factory fitted EC Fan Motor Assemblies and assisted electric defrost for sub zero room temperatures.All models suitable for R407F Application - The Kirby 9000 Series Evaporator - a Heatcraft Smart Solution which uses less energy.

KIRBY TA EVAPORATORS

Part Number

R22 R404A R134aAir

Flow (l/s)

Air Throw

(m)

FAN QTY

Motor (MAX) Amps

Width mm

Depth mm

Height mm

Nett Weight

(kg)List Price

Watts @

10KTD

Watts @

1KTD

Watts @

10KTD

Watts @

1KTD

Watts @

10KTD

Watts @

1KTDTA1R6P-C 3850 385 3930 393 3654 366 340 3.5 1 0.45 866 800 361 22.6 $3,040.08 TA2R6P-C 5230 523 6090 609 5664 567 779 3.5 2 0.9 1366 800 361 24.5 $3,554.78 TA3R6P-C 6960 696 7460 746 6938 694 727 3.5 2 0.9 1366 800 361 27.6 $3,798.36 TA4R6P-C 7830 783 8060 806 7496 750 683 3.5 2 0.9 1366 800 361 32.9 $4,024.83 TA5R6P-C 10490 1049 11260 1126 10472 1048 1090 3.5 3 1.35 1866 800 379 36.4 $4,735.20 TA6R6P-C 12900 1290 13210 1321 12285 1229 972 3.2 3 1.35 1866 800 379 45.3 $5,390.50 TA7R6P-C 15840 1584 16320 1632 15178 1518 1366 3.7 4 1.8 2366 800 379 54.7 $6,008.94

The twin air flow TA unit coolers with direct expansion or glycol water coils are designed for installation in cold rooms, air locks, laboratories, meat cutting and packing rooms, etc…

High Performance Heat Exchanger

The high efficient and compact TA range finned coils, are designed with corrugated aluminium fins and grooved internal structure copper tubes.

Aesthetics and Accessibility The recyclable ABS casing of the TA guarantees a high level of quality and finish.

• Robustness: highly resistant to thermal shocks.

• Aesthetics: its casing with integrated fan guards makes it blend with its installed environment.

• Hygiene: no water retaining areas favourable to germ development due to its round cornered casing, use of protected steel sheets and stainless steel screws.

• Safety: no sharp or cutting edges.

• Accessibility: hinged drain pan allowing for an easy access to all the components. Designed to accommodate installation of a condensate pump. Internal drain pans to avoid condensation on the casing. Evacuation of condensed water on left or right side. Easy access to the expansion valve.

Part Number Description List PriceRecommended condensate pump -single TA unit

SI33 SAUERMANN CONDENSATE PUMP $530.71

All models now fresh

white aluminium




S1: R

efrig

erat

ion

Eq

uipm

ent

Medium Temperature - 350mm Fan Diameter

KMT023W 2320 2020 700 12 1 155 0.65 1.33 1.31 1.46 14.7 $1,581.02

KMT045W 4500 3920 1400 17.5 2 310 1.3 2.06 2.03 2.26 25.3 $2,425.47

KMT063W 6250 5440 1400 17.5 2 310 1.3 2.59 2.55 2.84 26.3 $3,150.28

KMT071W 7100 6180 1375 16.5 2 310 1.3 3.75 3.68 4.1 30.4 $3,532.65

KMT093W 9300 8100 2160 21 3 465 1.95 4.12 4.05 4.52 37.7 $3,912.65

KMT106W 10600 9230 2060 20 3 465 1.95 5.29 5.2 5.8 42.6 $4,449.81

KMT121W 12100 10530 1970 19.5 3 465 1.95 6.42 6.31 7.03 47.6 $4,857.95

KMT132W 13200 11490 2880 24.5 4 620 2.6 5.2 5.12 5.7 49.5 $5,627.35

KMT154W 15400 13410 2630 22 4 620 2.6 8.69 8.55 9.52 63.7 $6,298.23

KMT165W 16500 14360 3600 27 5 775 3.25 6.45 6.35 7.07 60.5 $7,039.48

KMT198W 19800 17230 3280 24.5 5 775 3.25 10.78 10.6 11.81 77.5 $9,187.90

Medium Temperature with Heater (wired) - 300mm Fan Diameter

KMT013WH 1320 1150 380 8.5 1 73 0.32 900 3.75 - - 9.80 $2,027.42 KMT016WH 1620 1410 360 8 1 73 0.32 900 3.75 - - 10.70 $2,067.26 KMT020WH 2010 1750 340 7.5 1 73 0.32 900 3.75 - - 12.00 $2,206.67 KMT027WH 2700 2350 760 12 2 146 0.64 1800 7.5 - - 15.70 $2,441.32 KMT034WH 3400 2960 720 11.5 2 146 0.64 1800 7.5 - - 17.60 $2,789.88 KMT038WH 3780 3290 680 10.5 2 146 0.64 1800 7.5 - - 19.40 $3,016.71 KMT051WH 5050 4400 1080 14 3 219 0.96 - - 2700 3.75 23.30 $3,456.60 KMT060WH 5960 5190 1020 13 3 219 0.96 - - 2700 3.75 27.00 $4,014.99 KMT067WH 6650 5790 1440 16 4 292 1.28 - - 3600 5 31.10 $4,444.45 KMT081WH 8050 7010 1360 15 4 292 1.28 - - 3600 5 33.40 $4,921.16 Medium Temperature with Heater (wired) - 350mm Fan Diameter

KMT023WH 2320 2020 700 12 1 155 0.65 1600 6.67 - - 15.30 $2,423.65 KMT045WH 4500 3920 1400 17.5 2 310 1.3 - - 3200 6.7 26.30 $3,472.26 KMT063WH 6250 5440 1400 17.5 2 310 1.3 - - 3200 6.7 27.40 $4,426.01 KMT071WH 7100 6180 1375 16.5 2 310 1.3 - - 3200 6.7 31.60 $4,640.33 KMT093WH 9300 8100 2160 21 3 465 1.95 - - 4800 10 39.20 $5,590.11 KMT106WH 10600 9230 2060 20 3 45 1.95 - - 4800 10 44.30 $5,840.00 KMT121WH 12100 10530 1970 19.5 3 465 1.95 - - 4800 10 49.50 $6,790.20

KMT132WH 13200 11490 2880 24.5 4 620 2.6 - - 6400 13.33 51.50 $7,484.97

KMT154WH 15400 13410 2630 22 4 620 2.6 - - 6400 13.33 66.20 $8,008.89 KMT165WH 16500 14360 3600 27 5 775 3.25 - - 8000 16.67 62.90 $8,548.02 KMT198WH 19800 17230 3280 24.5 5 775 3.25 - - 8000 16.67 80.60 $10,341.36

All models now fresh

white aluminium

Part Number

Capacity W @ 6KTD

Air

Fans Qty

Motors (Max) 1 Phase

Heaters (Defrost) Nett Weight

(kg)List

PriceFlow (l/s)

Throw (m)

240/1 415/3

R404A R134a watts amps watts amps watts amps

EVAPORATORS (CONT'D)

Part Number

Capacity W @ 6KTD

Air

Fans Qty

Motors (Max) 1 Phase Refrigerant Charge*

Nett Weight

(kg)List

PriceFlow (l/s)

Throw (m)R404A R134a watts amps R507 R404A R22

KMT038W 3780 3290 680 10.5 2 146 0.64 2.05 2.01 2.24 18.7 $2,159.87

KMT051W 5050 4400 1080 14 3 219 0.96 2.29 2.25 2.51 22.4 $2,669.42

KMT060W 5960 5190 1020 13 3 219 0.96 3.03 2.98 3.32 26 $2,991.45

KMT067W 6650 5790 1440 16 4 292 1.28 3.02 2.97 3.31 29.9 $3,274.61

KMT081W 8050 7010 1360 15 4 292 1.28 4.09 4.03 4.49 32.1 $3,610.04

S1: R

efrig

erat

ion

Eq

uipm

ent

Low Temperature - 350mm Fan Diameter

KLT021W 2050 11 1 155 0.65 1.55 1.49 1600 6.67 - - 15.5 $2,317.56

KLT045W 4500 16 2 310 1.3 2.79 2.67 - - 3200 6.67 27 $3,825.84

KLT050W 4950 16 2 310 1.3 3.21 3.07 - - 3200 6.67 27.8 $4,278.57

KLT054W 5350 15.5 2 310 1.3 4.14 3.97 - - 3200 6.67 31.2 $4,597.59

KLT067W 6650 19.5 3 465 1.95 4.05 3.88 - - 4800 10 38.1 $5,629.70

KLT075W 7450 19.5 3 465 1.95 4.54 4.35 - - 4800 10 38.9 $5,852.54

KLT089W 8900 18.5 3 465 1.95 6.18 5.92 - - 4800 10 44.5 $6,638.35

KLT100W 10000 21.5 4 620 2.6 7.18 6.87 - - 6400 13.33 58.9 $7,346.75

KLT113W 11300 21.5 4 620 2.6 8.29 7.94 - - 6400 13.33 63 $8,109.11

KLT126W 12600 25 5 775 3.25 7.85 7.52 - - 8000 16.67 69.6 $8,545.40

KLT136W 13600 24 5 775 3.25 8.8 8.43 - - 8000 16.67 77.8 $9,354.69

Part Number

Cap. Watt @ 6KTD

Fans Qty


Refrigerant Charge*

Heaters (Defrost)

Nett Wt. (kg)

List Price

240/1 415/3

R404AThrow

(m) watts amps R507 R404A Watts Amps Watts Amps

Low Temperature - 300mm Fan Diameter

KLT013W 1280 7.5 1 73 0.32 0.84 0.8 900 3.75 - - 10.80 $1,860.15

KLT015W 1470 7 1 73 0.32 1.18 1.13 900 3.75 - - 11.80 $1,958.65

KLT024W 2400 10.5 2 146 0.64 1.72 1.64 1800 7.5 - - 17.50 $2,526.33

KLT028W 2780 10 2 146 0.64 2.27 2.17 1800 7.5 - - 19.40 $3,002.51

KLT030W 3000 10 2 146 0.64 2.29 2.19 1800 7.5 - - 19.50 $3,070.54

KLT036W 3600 13 3 219 0.96 2.63 2.52 - - 2700 3.75 24.40 $3,340.28

KLT042W 4150 12 3 219 0.96 3.11 2.98 - - 2700 3.75 26.50 $3,567.81

KLT062W 6200 14 4 292 1.28 4.62 4.42 - - 3600 5 34.60 $5,106.61


Technical Excellence FAST technical support & quoting to meet your needs. Our experienced engineers are reducing response times to keep you working efficiently.

1800 132 350 I 6am to 8pm AEST Monday to Friday

smart@ccess Product Selection ToolAfter calculating your project heat load requirements, use smart@ccess to make your equipment selection. We’re making everyday quoting even easier.

13 23 50 to register for smart@ccess

DRIVING EFFICIENCYWITH

NEW TOOLS




S1: R

efrig

erat

ion

Eq

uipm

ent

Part Number Description List Price Part Number Description List Price

300mm Fan Diameter - MT Application 300mm Fan Diameter - MT Application with Heater (wired)

KMT013W-EC UNIT COOLER 1X300 EC FAN 2R WHT $1,529.91 KMT013WH-EC UNIT COOLER HTR 1X300 EC FAN 2R WHT $2,269.97


KMT020W-EC UNIT COOLER 1X300 EC FAN 4R WHT $1,821.11 KMT020WH-EC UNIT COOLER HTR1X300 EC FAN 4R WHT $2,444.00







KMT081W-EC UNIT COOLER 4X300 EC FAN 4R WHT $4,852.63 KMT081WH-EC UNIT COOLER HTR 4X300 EC FAN 4R WHT P.O.A.


350mm Fan Diameter - MT Application 350mm Fan Diameter - MT Application with Heater (wired)









KMT154W-EC UNIT COOLER 4X350 EC FAN 5R WHT $6,468.30 KMT154WH-EC UNIT COOLER HTR 4X350 EC FAN 5R WHT $8,178.96 KMT165W-EC UNIT COOLER 5X350 EC FAN 3R WHT $7,050.87 KMT165WH-EC UNIT COOLER HTR 5X350 EC FAN 3R WHT $8,559.41



300mm Fan Diameter - LT Application 350mm Fan Diameter - LT Application

KLT013W-EC LOW TEMP EVAP 1X300 EBM EC P.O.A. KLT021W-EC LOW TEMP EVAP 1X350 EBM EC $2,312.62








KLT113W-EC LOW TEMP EVAP 4X350 EBM EC $6,715.33

KLT126W-EC LOW TEMP EVAP 5X350 EBM EC $7,699.29 KLT136W-EC LOW TEMP EVAP 5X350 EBM EC $7,886.60


MEDIUM/LOW TEMPERATURE - EC FANS 2 SPEED

EC Fans available as an option

Denotes build to order sales process - please contact your local Heatcraft Branch Field Retrofit kits are available for EC Fan and Assisted Electric Defrost ( MT application) options. Please contact your local Heatcraft Branch for information.


Kirby Evaporator Solutions

Natural fluids:Glycol water

Heatcraft Australia offer a wide range of Kirby® evaporators ranging from compact cabinet coolers to heavy commercial industrial unit coolers. Whether your application is a small storage room, cold room, packing room or large deep-freezing application, Heatcraft have a solution.All Kirby evaporators are engineered to achieve optimum functionality and high performance. As an added benefit Glycol and CO2 options are also available. In addition and to complement this, EC fan technology is continually being engineered into the range for increased energy efficiency.

Contact your local Heatcraft branch on 13 23 50 for more information.

Energy efficiency:EC Fans



S1: R

efrig

erat

ion

Eq

uipm

ent

KIRBY ULTRA LOW FROST EVAPORATORS - FOR ROOMS REQUIRING ELECTRIC DEFROST

Part Number

Cap. Watts. @ 6KTD *

Air

Fans Qty

Motors (Max) 415V 3 Phase

Defrost Heaters Nett Weight

(kg)List

PriceFlow (l/s)

Throw (m)

240V 1 Phase 415V 3 Phase

R404a R407F Watts Amps Watts Amps Watts Amps

ULF-H Negative Temperature - 300mm Fan Diameter

KLT015ULF 1140 1243 340 6.0 1 73 0.32 900 3.75 - - 12.0 $1,728.67

KLT018ULF 1455 1586 760 9.6 2 146 0.64 1800 7.50 - - 15.7 $2,162.99

KLT028ULF 2300 2507 680 8.6 2 146 0.64 1800 7.50 - - 19.4 $2,388.81

KLT042ULF 3585 3908 1020 10.6 3 219 0.96 - - 2700 3.75 27.0 $3,096.77

KLT062ULF 4440 4840 1360 11.9 4 292 1.28 - - 3600 5.00 33.7 $3,865.19

ULF-H Negative Temperature - 350mm Fan Diameter

KLT021ULF 1695 1848 700 8.1 1 155 0.65 1600 6.67 - - 15.3 $2,036.36

KLT050ULF 3760 4099 1400 11.6 2 310 1.30 - - 3200 6.67 27.4 $2,959.21

KLT054ULF 4720 5145 1375 11.0 2 310 1.30 - - 3200 6.67 31.6 $3,163.31

KLT075ULF 5730 6246 2160 14.3 3 465 1.95 - - 4800 10.00 39.2 $4,008.34

KLT093ULF 7745 8442 1970 13.1 3 465 1.95 - - 4800 10.00 49.5 $4,416.65

KLT113ULF 9675 10545 2750 15.2 4 620 2.60 - - 6400 13.33 60.6 $4,979.16

KLT162ULF 13430 14639 3280 16.5 5 775 3.25 - - 8000 16.67 80.6 $7,045.88

* CAPACITY - Rated at standard medium temperature conditions of -24˚C SST and 6KTDAdd on face heater kits available on request. Please contact your local Heatcraft branch on 13 25 50 for details.

Optional Kit Notes:

Evaporators are available with EC motor option, part number contains and -EC suffix. E.g. KMT###HLF-EC 350mm EC Fan kits are factory wired to suit high speed operation for low speed changeover and suggested controller please refer to Heatcraft / KirbyTechnical Bulletin TB_107

The heater kit "KP527-x" for a KMT-HLF unit includes both a 2-wire heater safety switch (Heatcraft # MCC126-1) and a 3-wire thermostat for the functions of defrost control and fan delay (Heatcraft # MCC143-1). It is mandatory that the 2-wire heater safety switch is fitted and fitting of the 3-wire thermostat is optional.

Part Number

Capacity Watts @ 6KTD *

Air**

Fans Qty


Nett Weight

(kg)List

PriceFlow (l/s)

Throw (m)R134a R404A R407F Watts Amps

HLF Positive Temperature - 300mm Fan Diameter

KMT020HLF 1512 1738 1869 340 6.5 1 73 0.32 11.5 $1,672.71

KMT027HLF 1873 2153 2308 760 10.3 2 146 0.64 15.1 $2,126.92

KMT038HLF 3075 3534 3777 680 9.3 2 146 0.64 18.7 $2,513.91

KMT060HLF 4632 5324 5666 1020 11.5 3 219 0.96 26.0 $3,243.94

KMT081HLF 5349 6148 6741 1360 12.9 4 292 1.28 32.4 $3,762.56

ULF Positive Temperature - 350mm Fan Diameter

KMT023HLF 2109 2424 2636 700 8.8 1 155 0.65 14.7 $1,824.49

KMT063HLF 4895 5626 6047 1400 12.6 2 310 1.30 26.3 $3,081.04

KMT071HLF 6246 7179 7629 1375 11.9 2 310 1.30 30.4 $3,400.27

KMT093HLF 7495 8615 8986 2160 15.4 3 465 1.95 37.7 $4,351.95

KMT121HLF 10343 11889 12662 1970 14.2 3 465 1.95 47.6 $4,990.68

KMT140HLF 12583 14463 15329 2750 16.4 4 620 2.60 58.3 $5,950.93

KMT198HLF 16686 19179 20571 3280 17.8 5 775 3.25 77.5 $7,226.36 * CAPACITY - Rated at standard medium temperature conditions of - 4˚C SST and 6KTD

* EC Fan Option Available Medium Temp Evaporators - Refer To Factory Fitted Kit Option Chart

* Assisted Defrost Heaters Option Available - Refer To Factory Fitted Kit Option Chart

Low Frost Evaporators are designed to provide maximum time between defrosts in situations where you have high humidity or high influx of moist outside air. Optimal fin design and spacing has been incorporated to minimize frost build up. Performance of these evaporators exceeds traditional designs with 4 and 5 FPI.


KIRBY LOW FROST EVAPORATORS



ent

KIRBY HEAVY DUTY COOLROOM EVAPORATORS - KHDC MEDIUM TEMPERATURE

KIRBY HEAVY DUTY COOLROOM EVAPORATORS - KHDC LOW TEMPERATURE

Features

• Optimised capacities and extended application range

• Two speed - External rotor Ziehl / EBM Motors used on all models. EC Fans available on request.

• All fans fully wired (High Speed as standard) to separate electrical compartment

• High Efficiency coil using aluminium fins and rifle bore tubing

• Interchangeable Distributor Orifice for different refrigerant and temperature applications. Ease of field retrofit.

• White powder coated aluminium casing

• Simplified access to expansion valve compartment

• Reversible drain tray

Part Number

Nominal Capacity Watts @ 6KTD Air

Fans Qty


Nett Weight

(kg)List

PriceR507R404A/

R22 R407F R134aFlow (l/s)

Throw (m) Watts Amps

500mm Fan Diameter

KHDC103 10330 10280 11210 9210 1920 20 1 600 1.15 80 $5,740.67

KHDC136 14510 13620 14850 12020 3960 22 2 1200 2.3 120 $7,873.74

KHDC161 15830 16110 17560 14420 3920 22 2 1200 2.3 130 $8,426.35

KHDC188 18390 18770 20460 17100 3880 22 2 1200 2.3 140 $9,900.01

KHDC214 21700 21480 23410 19570 3840 22 2 1200 2.3 155 $10,086.98

KHDC263 23460 26280 28650 23500 5820 24 3 1800 3.45 205 $13,377.69

KHDC316 31110 31640 34490 28560 5770 24 3 1800 3.45 225 $14,776.87

KHDC366 35940 36560 39850 31870 7770 25 4 2400 4.6 265 $17,202.01

KHDC430 42230 42950 46820 37960 7690 25 4 2400 4.6 285 $18,796.78

KHDC538 51250 53760 58600 44060 9610 26 5 3000 5.75 345 $24,390.67

* CAPACITY - Rated at standard room temperature conditions of -4°C SST and 6KTD .. High Speed Fan Application @1295 RPM - Factors for Low Speed (900rpm) performance: Capacity = multiply by 0.86, Airflow by 0.80 and Air Throw by 0.75

** AIR THROW - Calculated at CRMA guidelines - factor of 0.94 for +2°C room is included

Features

• Optimised model and application range for both Low and Medium Temperature applications.

• Interchangeable Distributor Orifice for different refrigerant applications and temperature conditions( -31oC upto -3oC Evaporator temperatures)

• Two speed - External rotor Ziehl / EBM Motors used on all models. EC Fans available on request.

• All fans fully wired (High Speed as standard) to separate electrical compartment

• High Efficiency coil using aluminium fins and rifle bore tubing

• Electric defrost elements fully wired to electrical compartment

• White powder coated aluminium casing

• Simplified access to expansion valve compartment

• Reversible drain tray

Part Number


Fans Qty


Defrost Heaters 415V 3 Phase

Nett Weight

(kg)List

PriceR507 R404A R407F R134a***Flow (l/s)

Throw (m) Watts Amps Watts Amps

500mm Fan Diameter

KHDF086 8920 8620 9400 7330 1920 18 1 600 1.15 5250 8.5 85 $6,519.48

KHDF088 9180 8840 9640 7510 3960 20 2 1200 2.3 8700 14.6 125 $8,273.71

KHDF117 12130 11670 12720 9920 3920 20 2 1200 2.3 8700 14.6 135 $9,036.18

KHDF151 15710 15070 16430 12810 3880 20 2 1200 2.3 8700 14.6 150 $10,593.77

KHDF173 18020 17250 18800 14660 3840 20 2 1200 2.3 8700 14.6 160 $11,733.31

KHDF212 21820 21180 23090 18000 5820 22 3 1800 3.45 13600 23.3 205 $14,774.01

Glycol options available - Selections should be confirmed by your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36




S1: R

efrig

erat

ion

Eq

uipm

ent

Kirby Heavy Duty Evaporators now offer an extended optimised application range for both KHDF and KHDC standard models.

The need for a positive defrost requirement on Medium Temperature application can now be achieved in most instances by replacing distributor orifice of a Low Temperature model.

Factory fitted and field Defrost Kits for KHDC models are available on request.

Extended Optimised Application Range

KHDF R404A Capacity Factor and Application Range

SST ˚C -36 -30 -24 -18 -12 -6 -3

FACTOR 0.77 0.89 1.00 1.12 1.24 1.31 1.33

KHDF R507 Capacity Factor and Application Range

SST ˚C -36 -30 -24 -18 -12 -6 -3

FACTOR 0.79 0.9 1.00 1.11 1.21 1.28 1.30

KHDF R407F Capacity Factor and Application Range

SST ˚C -36 -30 -24 -18 -12 -6 -3

FACTOR 0.81 0.91 1.00 1.10 1.22 1.30 1.33

KHDF R134a Capacity Factor and Application Range

SST ˚C -15 -12 -6 -3

FACTOR 1.12 1.23 1.31 1.32

KIRBY HEAVY DUTY COOLROOM EVAPORATORS - KHDC LOW TEMPERATURE

KHDF252 26020 25210 27480 21430 5770 22 3 1800 3.45 13600 23.3 230 $17,637.21

KHDF286 29090 28590 31160 24300 7770 23 4 2400 4.6 15320 28.2 270 $19,790.32

KHDF320 32690 31980 34860 27180 7690 23 4 2400 4.6 15320 28.2 290 $20,480.01

KHDF380 40390 37990 41410 32290 9610 24 5 3000 5.75 18280 33.6 350 $26,974.42

* CAPACITY - Rated at standard room temperature conditions of -24°C SST and 6KTD. High Speed Fan Application @1295 RPM - Factors for Low Speed (900rpm) performance: Capacity = multiply by 0.86, Airflow by 0.80 and Air Throw by 0.75

** AIR THROW - Calculated at CRMA guidelines - factor of 0.87 for -18°C room is included

*** R134a for Low temp applicationus, capacity factor table - SST upto -15°C is recommended.

Part Number


Fans Qty


Defrost Heaters 415V 3 Phase

Nett Weight

(kg)List

PriceR507 R404A R407F R134a***Flow (l/s)

Throw (m) Watts Amps Watts Amps



ent

KIRBY NK HEAVY COMMERCIAL INDUSTRIAL UNIT COOLER

• The NK range is designed for industrial refrigeration, storage or deep-freezing applications

• NK version H (high efficiency): Adapted to the storage of packed products

• Economical choice, wide range of options for specific industrial applications (pressure sleeve, defrost…) 4 fin spacing distances: 4, 6, 9 mm (6, 4 or 3 FPI)

PRODUCT OVERVIEW

Casing

• The casing is made of pre-painted, white galvanised steel offering a high resistance to corrosion and impact damage

• An internal aluminium drain pan limits the effects of condensation under the main drain pan during the defrost process

• The NK unit coolers are delivered in mounting position in reinforced crates

Ventilation

• 2 fan types are used for the NK range: Ø 630 mm 4/6 pole (1,500/1,000 rpm) - Ø 800 mm 6/8 pole (1,000/750 rpm)

• Selection of a unit cooler with various fan number/diameter combinations offering the dimensional and air throw characteristics best adapted to the size of the cold room

Coil

• The finned coils of the NK range are designed with aluminium fins spaced at 4, 6, or 9 mm, crimped onto copper tubes

• High-efficiency H type fins for an economical solution. This type of fin is particularly suitable for the storage of packed products. The reduced size of the heat-exchanger also enables fast defrosting

Defrost

NKH ... C, NKH ... S

• The shielded electric heating elements are inserted in sleeves located in the finned coil, 2 or 3 heating elements are placed under the intermediate drain pan

• This facility enables homogenous heat distribution for fast and efficient defrosting

• Total gas defrost (HGT) available as optional extra

NKH ... R, NKH ... L

• Light electric defrost (E1U) and “low temperature” electric defrost (ELU) models available as optional extra

• A water defrost (DAE) option is available for room temperature equal to or greater than +4° C. In this case the unit cooler depth is increased by 40 mm

• Maximum water flow-rate with NK: 1 fan = 5 m3/h. - 2 fans = 10 m3/h 3 fans = 15 m3/h. - 4 fans = 20 m3/h

Nomenclature Data

NKH(1) 3x6(2) D(3) B2(4) R(5)

(1) H = High-efficiency fin

(2) Number of fans x Ø: 6 = Ø 630 mm - 8 = Ø 800 mm

(3) Motor connection: D = Delta

(4) Module

(5) Fin spacing: R = 4 mm - L/C = 6 mm - S = 9 mm

MT 20kW 110kW LT 16kW 68kW

Kirby NK Heavy Commercial Industrial Unit Cooler


For more information on

the Kirby NK range, contact Heatcraft

on 13 23 50.




S1: R

efrig

erat

ion

Eq

uipm

ent

KIRBY NK HEAVY COMMERCIAL INDUSTRIAL UNIT COOLER (CONT'D)

Part Number

R404A

Capacity

Kw

High

Efficiency

Fin

Series#

Fan Qty

x Dia.

Air Delivery

Electric Defrost Kit

400V/3/50Hz.

Coil

Volume

dm2.

Nett

Dry

Weight

kg

List

Price

Flow

m3/h.

Std.

Throw

With VPA

Option -

Throw

Light Defrost

Kit Option E1U

Total Watts x

Amps

Heavy Defrost

Kit Option ELU

Total Watts x

Amps

Medium Temperature Nominal Capacity Watts -4°C SST @ 6KTD

NKH1X6DB3R 21.18 4mm. 1 x 630 11650 38 53 10350 x 14.9 13800 x 19.9 28.7 200 $11,209.77

NKH1X8DC2R 29.60 4mm. 1 x 800 17850 40 55 9000 x 13.00 13500 x 19.5 35.9 270 $14,322.30

NKH2X6DB2R 38.24 4mm. 2 x 630 25200 42 57 13200 x 19.1 19800 x 28.6 43.1 300 $18,011.61

NKH3X6DB1R 47.71 4mm. 3 x 630 40950 50 65 19500 x 28.1 19500 x 28.1 43.1 370 $23,155.20

NKH2X8DC1R 49.21 4mm. 2 x 800 39000 44 59 17400 x 25.1 17400 x 25.1 47.9 420 $23,089.25

NKH2X8DC2R 58.27 4mm. 2 x 800 35700 41 56 17400 x 25.1 26100 x 37.7 71.8 480 $26,687.25

NKH3X6DB2R 59.66 4mm. 3 x 630 37800 47 62 19500 x 28.1 29250 x 42.2 64.6 430 $26,477.73

NKH4X6DB1R 63.94 4mm. 4 x 630 54600 55 70 25800 x 37.2 25800 x 37.2 55.7 480 $30,336.93

NKH3X8DC1R 65.42 4mm. 3 x 800 58500 50 65 25800 x 37.2 25800 x 37.2 69.6 570 $32,591.00

NKH4X6DB2R 76.40 4mm. 4 x 630 50400 52 67 25800 x 37.2 38700 x 55.9 83.5 550 $34,105.68

NKH4X6DB3R 85.70 4mm. 4 x 630 46600 49 64 38700 x 55.9 51600 x 74.5 111.3 630 $38,380.95

NKH3X8DC2R 86.20 4mm. 3 x 800 53550 47 62 25800 x 37.2 38700 x 55.9 104.3 670 $38,254.05

NKH4X8DC2R 102.02 4mm. 4 x 800 71400 52 67 34200 x 49.4 51300 x 74.0 139.1 840 $49,390.10

NKH1X6DB3L 20.38 6mm. 1 x 630 12600 40 55 10350 x 14.9 13800 x 19.9 28.7 190 $10,878.12

NKH1X8DC2L 27.59 6mm. 1 x 800 19200 43 58 9000 x 13.00 13500 x 19.5 35.9 260 $13,910.56

NKH2X6DB1L 28.28 6mm. 2 x 630 28600 46 61 13200 x 19.1 19800 x 28.6 28.7 260 $15,436.80

NKH2X6DB3L 40.90 6mm. 2 x 630 25200 42 57 19800 x 28.6 19500 x 28.1 57.5 330 $19,561.32

NKH2X8DC1L 43.83 6mm. 2 x 800 41300 46 61 17400 x 25.1 17400 x 25.1 47.9 400 $22,405.13

NKH2X8DC2L 54.64 6mm. 2 x 800 38400 43 58 17400 x 25.1 26100 x 37.7 71.8 460 $25,870.10

NKH3X6DB2L 54.85 6mm. 3 x 630 40200 49 64 19500 x 28.1 29250 x 42.2 64.6 410 $25,609.41

NKH3X6DB3L 60.78 6mm. 3 x 630 37800 47 62 29250 x 42.2 39000 x 56.3 86.2 460 $28,769.13

NKH4X6DB2L 71.08 6mm. 4 x 630 53600 55 70 25800 x 37.2 38700 x 55.9 83.5 530 $32,773.05

NKH3X8DC2L 80.76 6mm. 3 x 800 57600 50 65 25800 x 37.2 38700 x 55.9 104.3 650 $37,031.49

NKH4X6DB3L 82.13 6mm. 4 x 630 50400 52 67 38700 x 55.9 51600 x 74.5 111.3 600 $37,108.62

NKH4X8DC2L 95.99 6mm. 4 x 800 76800 55 70 34200 x 49.4 51300 x 74.0 139.1 800 $47,515.08

Part Number

R404A

Capacity

Kw

High

Efficiency

Fin

Series#

Fan Qty

x Dia.

Air Delivery

Electric Defrost

400V/3/50Hz. Total Watts

x Amps

Coil

Volume

dm2.

Nett

Dry

Weight

kg

List

Price

Flow

m3/h.

Std.

Throw

With VPA

Option -

Throw

Low Temperature Nominal Capacity Watts -24°C SST @ 6KTD

NKH1X6DB3C 17.02 6mm. 1 x 630 12600 40 55 13800 x 19.9 28.7 210 $13,229.82

NKH1X8DC2C 22.30 6mm. 1 x 800 19200 43 58 13500 x 19.5 35.9 280 $16,336.68

NKH2X6DB1C 22.55 6mm. 2 x 630 28600 46 61 13200 x 19.1 28.7 290 $17,752.32

NKH2X6DB2C 29.57 6mm. 2 x 630 26800 44 59 19800 x 28.6 43.1 320 $20,755.26

NKH2X6DB3C 34.48 6mm. 2 x 630 25200 42 57 26400 x 38.1 57.5 360 $23,691.87

NKH2X8DC1C 35.72 6mm. 2 x 800 41300 46 61 17400 x 25.1 47.9 440 $24,970.60

NKH3X6DB2C 44.53 6mm. 3 x 630 40200 49 64 29250 x 42.2 64.6 460 $30,125.88

NKH3X6DB3C 51.86 6mm. 3 x 630 37800 47 62 39000 x 56.3 86.2 520 $34,358.94

NKH3X8DC2C 58.71 6mm. 3 x 800 57600 50 65 38700 x 55.9 104.3 700 $42,029.41

NKH4X6DB3C 60.19 6mm. 4 x 630 50400 52 67 51600 x 74.5 111.3 670 $44,489.34

NKH1X6DB3S 15.29 9mm. 1 x 630 13400 42 57 13800 x 19.9 28.7 210 $13,024.80



ent

Part Number

R404A

Capacity

Kw

High

Efficiency

Fin

Series#

Fan Qty

x Dia.

Air Delivery

Electric Defrost

400V/3/50Hz. Total Watts

x Amps

Coil

Volume

dm2.

Nett

Dry

Weight

kg

List

Price

Flow

m3/h.

Std.

Throw

With VPA

Option -

Throw

NKH2X6DB1S 19.23 9mm. 2 x 630 29600 47 62 13200 x 19.1 28.7 280 $17,788.50

NKH1X8DC2S 19.65 9mm. 1 x 800 20150 44 59 13500 x 19.5 35.9 280 $16,526.71

NKH2X8DC1S 30.23 9mm. 2 X 800 42800 48 63 17400 x 25.1 47.9 430 $26,028.46

NKH2X6DB3S 30.93 9mm. 2 x 630 26800 44 59 26400 x 38.1 57.5 360 $23,685.84

NKH2X8DC2S 35.01 9mm. 2 x 800 40300 45 56 26100 x 37.7 71.8 480 $30,544.96

NKH3X6DB2S 38.97 9mm. 3 X 630 42150 51 64 29250 x 42.2 64.6 450 $29,836.44

NKH3X8DC1S 39.26 9mm. 3 X 800 64200 55 58 25800 x 37.2 69.6 590 $36,835.12

NKH3X6DB3S 46.59 9mm. 3 x 630 40200 49 64 39000 x 56.3 86.2 510 $33,689.61

NKH3X8DC2S 51.96 9mm. 3 x 800 60450 52 58 38700 x 55.9 104.3 670 $43,575.03

NKH4X6DB3S 54.65 9mm. 4 x 630 53600 55 65 51600 x 74.5 111.3 640 $43,826.04

NKH4X8DC2S 65.31 9mm. 4 x 800 80600 48 59 51300 x 74.0 139.1 860 $56,320.04

*ø 630 mm : 400 V/3/50 Hz : ƒ¢ = 1900 W max - 3,20 A max - Y = 1200 W max - 1,95 A max

*ø 800 mm : 400 V/3/50 Hz : ƒ¢ = 2000 W max - 4,00 A max - Y = 1250 W max - 2,30 A max

(1) Residual air speed: 0.25 m/s, in compliance with standard.

(2) Electric defrost options.

(3) For motor connection in star (Y) instead of delta (D) correction factors apply.

Refrigerant R134a R407FMedium Temperature 0.87 1.09

Low Temperature 0.85 1.09

Refrigerant Factor

Options As Listed Are Available On Request - For Assistance Please Contact Your Local Heatcraft BranchGlycol options available - Selections should be confirmed by your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

OptionsVentilation• VPA (Kit):

Air pressure shell also allowing the connection of a textile duct

Coil• BXT (Factory):

Blygold Polual XT coil protection (local)

• WCO (Factory): Glycol water, coolant (please contact us for details) Q3

Defrost• E1U (Factory):

Light electric defrost

• ELU (Factory): Electric defrost (coil + drain pan)

• HGT (Factory): Hot gas (coil and drain pan)

• RVU (Factory): Shell defrost heaters

• DAE (Factory): Water defrost

KIRBY NK HEAVY COMMERCIAL INDUSTRIAL UNIT COOLER (CONT'D)



S1: R

efrig

erat

ion

Eq

uipm

entREMOTE CONDENSERS

KIRBY KRC SERIES CONDENSERS

Kirby KRC Remote Condensers now include EC motor technology option for low noise and energy savings The complete range has also been upgraded to handle the higher pressures of R410A refrigerant.

Heatcraft have upgraded the popular Kirby KRC range of remote condensers to include an EC fan motor option on all models. The complete range has also been upgraded to handle the higher pressures of R410A refrigerant.

The inclusion of the EC fan motor is an efficient low noise selection that provides up to 30% power saving over the current AC motor range. For projects seeking a reduction in carbon footprint, the inclusion of the EC motor can potentially save ½ tonne of carbon per annum.

The Kirby KRC Remote Condenser with EC fan option is available in all sizes including 350mm, 500mm and 630mm. All models feature the latest pre coated fin as standard for optimal corrosion protection.

Features

• Optimised Coil Design for enhanced heat transfer performance

• Kirby Blue Koted aluminium fins for optimal UV and corrosion resistance

• Powder Coated Galvabond casing for extended service life

• Euro Design Leg allowing ease of height adjustment and installation for either vertical or horizontal air flow position.

Part Number

Total Heat Rejection CapacityNoise Data # Sound Press. Dba @ 3m (Hi

/ Lo Speed)

List Price

Capacity in Watts/K based on 32˚C AMB, 50˚C COND, 0K S/C

R404A R22 R134a R407F R410A Air Fl. R404A R22 R134a R407F R410A Air Fl.

Watts/K l/s Watts/K l/s

High Speed Low Speed

Single Coil Models - 350mm Diameter 4P Fan - High Speed 1380 RPM 240V/1PH

KRC80- 4PH

803 762 746 763 819 1260 - - - - - - 56.5 $1,976.67

KRC107- 4PH

1076 1022 1001 1023 1097 1295 - - - - - - 56.5 $2,397.42

KRC134-4PH

1338 1271 1245 1271 1365 1210 - - - - - - 56.5 $3,077.38

Single Coil Models - 500mm Diameter 6P Fan- High Speed 935RPM / Low Speed 780RPM 240V/1PH*

KRC137-6PH

1366 1298 1271 1298 1394 1095 1202 1142 1118 1142 1226 955 55/52 $3,181.28

KRC181-6PH

1807 1717 1681 1717 1843 2435 1590 1511 1479 1511 1622 2120 58/55 $4,262.88

KRC254-6PH

2544 2417 2366 2417 2595 2170 2239 2127 2082 2127 2284 1890 58/55 $5,661.24

Single Coil Models - 500mm Diameter 4P Fan- High Speed 1340RPM / Low Speed 1070RPM 240V/1PH*KRC164-4PH

1635 1553 1520 1553 1667 1530 1487 1413 1383 1413 1517 1330 61/53 $3,140.49

KRC213-4PH

2135 2029 1986 2029 2178 3290 1943 1846 1807 1846 1982 2860 64/56 $4,149.86

KRC317-4PH

3171 3012 2949 3012 3234 2910 2886 2741 2684 2741 2944 2530 64/56 $5,589.41

Single Coil Models - 630mm Diameter 6P Fan- High Speed 890RPM / Low Speed 680RPM 240V/1PH*KRC389-6PH

3885 3691 3613 3691 3963 3745 3341 3174 3107 3174 3408 3070 61/55 $6,682.45

KRC457-6PH

4572 4343 4252 4343 4663 6475 3932 3735 3656 3735 4011 5310 63/57 $7,984.94



entEC FAN (10-0V) + HEATCRAFT ORBUS® CONTROL FACTORY FITTED KIT OPTIONS:


KP560-23F KIT KRC 2X350 EC FAN + ORBUS KRC80 $2,120.14



KP560-14F KIT KRC 1X500Ø EC FAN + ORBUS KRC164 $2,659.58

KP560-1F KIT KRC 2X500Ø EC FAN + ORBUS KRC213 - KRC317 $4,509.61

KP560-2F KIT KRC 2X630Ø EC FAN + ORBUS KRC389 $4,184.17

KP560-3F KIT KRC 3X630Ø EC FAN + ORBUS KRC457- KRC574 $5,844.72

KP560-4F KIT KRC 4X630Ø EC FAN + ORBUS KRC693- KRC861 $7,609.55

KP560-5F KIT KRC 2X2 630Ø EC FAN + ORBUS KRC778 $7,709.11

KP560-6F KIT KRC 3X2 630Ø EC FAN + ORBUS KRC914- KRC1148 $11,018.61

KP560-7F KIT KRC 4X2 630Ø EC FAN + ORBUS KRC1386- KRC1722 $14,545.25

REMOTE CONDENSERS (CONT'D)

Part Number

Total Heat Rejection CapacityNoise Data # Sound Press. Dba @ 3m (Hi

/ Lo Speed)

List Price

Capacity in Watts/K based on 32˚C AMB, 50˚C COND, 0K S/C

R404A R22 R134a R407F R410A Air Fl. R404A R22 R134a R407F R410A Air Fl.

Watts/K l/s Watts/K l/s

High Speed Low SpeedKRC574-6PH

5738 5452 5337 5452 5853 5620 4935 4688 4590 4688 5034 4610 63/57 $9,258.28

KRC693-6PH

6927 6580 6442 6580 7065 8755 5888 5593 5475 5593 6006 7090 64/58

$11,377.63 KRC861-6PH

8611 8180 8008 8180 8783 7755 7319 6953 6807 6953 7465 6280 64/58

$13,776.65 Twin Coil Models - 630mm Diameter 6P Fan - High Speed 890RPM / Low Speed 680 RPM 240V/1PH*KRC778-6PH

7770 7382 7226 7382 7926 7490 6683 6348 6215 6348 6817 6140 64/58

$14,915.13 KRC914-6PH

9143 8686 8503 8686 9326 12950 7863 7470 7313 7470 8020 10620 66/60

$18,300.24

KRC1148-6PH

11477 10903 10674 10903 11707 11240 9870 9377 9179 9377 10067 9220 66/60

$21,395.92

KRC1386-6PH

13853 13160 12883 13160 14130 17510 11775 11186 10951 11186 12011 14180 67/61

$28,460.21 KRC1722-6PH

17221 16360 16016 16360 17566 15510 14638 13906 13613 13906 14931 12560 67/61

$30,824.93 MAXIMUM OPERATING PRESSURE 3650kPag is suitable for R410a * 415V/3PH Fan/Motor Assemblies are available on request. Please contact your nearest Heatcraft branch. * EC fan option with Orbus® Controller selected for 100% duty at 80% fan speed * Field Retrofit kits are available for EC Fan install with or without Orbus® Control. Please contact your local Heatcraft Branch for information.



S1: R

efrig

erat

ion

Eq

uipm

ent

KIRBY WRC SERIES CONDENSERS - STANDARD RANGE 6 POLE AC. - BLUE FIN

KIRBY WRC HIGH EFFICIENCY REMOTE SERIES CONDENSERS

Part Number

Total Heat Rejection Capacity Watts/K based on 32°C AMB, 50°C COND, 0K S/C

R404A R22 R134a R407F R404A R22 R134a R407F

Watts/K


Single Coil

WRC112B 11210 10650 10430 9699 9190 8730 8550 8730

WRC123B 12310 11690 11450 11694 9850 9350 9160 9357

WRC167B 16740 15900 15570 15903 13730 13040 12770 13043

WRC185B 18460 17540 17170 17537 14770 14030 13740 14031

WRC225B 22470 21350 20900 21346 18430 17510 17140 17508

WRC247B 24650 23420 22920 23417 19720 18740 18340 18734

WRC277B 27680 26300 25740 26296 22700 21570 21110 21565

WRC307B 30690 29160 28540 29156 24550 23330 22830 23322

Double Coil

WRC224B 22420 21300 20850 21299 18380 17470 17090 17461

WRC246B 24630 23400 22910 23399 19700 18720 18320 18715

WRC335B 33480 31810 31140 31806 27450 26080 25530 26077

WRC369B 36920 35070 34340 35074 29540 28060 27470 28063

WRC449B 44940 42690 41790 42693 36850 35010 34270 35007

WRC493B 49290 46830 45840 46826 39430 37460 36670 37458

WRC554B 55360 52600 51480 52592 45400 43140 42220 43130

WRC614B 61380 58310 57080 58311 49100 46650 45660 46645

The Kirby Remote Condenser is the market leading condenser and most energy efficient unit of its type. \ Recognised for its technical excellence and efficiency by AIRAH, the Kirby WRC has been specifically designed for supermarkets and other applications with low noise and energy savings in mind.

The WRC offers significant energy efficiency an power savings as a result of having an optimised fin to fan ratio. This ensures even air distribution at reduced pressure drop across a wide fan speed range, which in turn reduces electricity consumption and operating costs

It has been designed with a larger coil to fan ratio than competitor products. Simply explained the Kirby WRC needs less airflow to achieve the same capacity because of the larger coil face area per fan. A 10 fan remote condenser from a competitor can be replaced by an 8 fan Kirby WRC, an 8 fan can be replaced by a 6 fan Kirby WRC and a 6 fan can be replaced by a 5 fan and so on.

KIRBY WRC SERIES CONDENSERS - LOW NOISE RANGE 8 POLE AC. - BLUE FIN

Part Number


R404A R22 R134a R407F R404A R22 R134a R407F

Watts/K


Single Coil

WRC112BLN 9490 9020 8830 9016 8190 7790 7620 7780

WRC123BLN 9990 9490 9290 9490 8380 7960 7790 7961

WRC167BLN 14220 13510 13220 13509 12270 11660 11410 11656

WRC185BLN 15010 14260 13960 14260 12600 11970 11720 11970

WRC225BLN 19000 18050 17670 18050 16400 15580 15250 15580

WRC247BLN 19990 18990 18590 18990 16780 15940 15610 15941

WRC277BLN 23590 22410 21940 22410 20370 19350 18940 19351

WRC307BLN 25010 23760 23260 23759 20990 19940 19520 19940



ent

Double Coil

WRC224BLN 18970 18020 17640 18022 16370 15550 15220 15551

WRC246BLN 19980 18980 18580 18981 16770 15930 15600 15931

WRC335BLN 28430 27010 26440 27008 24540 23310 22820 23313

WRC369BLN 30020 28520 27920 28519 25190 23930 23430 23930

WRC449BLN 38010 36110 35350 36109 32810 31170 30510 31169

WRC493BLN 39990 37990 37190 37990 33560 31880 31210 31882

WRC554BLN 47180 44820 43880 44821 40740 38700 37890 38703

WRC614BLN 50020 47520 46520 47519 41980 39880 39040 39881

KIRBY WRC SERIES CONDENSERS - PRICING OPTIONS NEW MODELS!


List Price

6 Pole Std

Blue Kote

List Price 8 Pole Low

Noise Blue Kote

List Price EC Fan

Blue Kote

Axitop EC Fan / Blue Kote

kW/K Capacity over the page List Price

Single Coil

WRC112B WRC 4 ROW 2 FAN 1 COIL $18,483.04 $18,483.04 $23,641.10 WRC112BECA $24,584.47








Double Coil









Part Number


R404A R22 R134a R407F R404A R22 R134a R407F

Watts/K


The new WRC-BEC models now offer high efficiency performance and reduced energy costs. For further information, please contact your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36

KIRBY WRC SERIES CONDENSERS - LOW NOISE RANGE 8 POLE AC. - BLUE FIN (CONT'D)



S1: R

efrig

erat

ion

Eq

uipm

ent

Part Number

Total Heat Rejection Capacity Watts/K based on 32°C AMB, 50°C COND, 0K S/C, 80°C DISCH GAS

R404A R407F R134A R404A R407F R134A R404A R407F R134A

WATTS/K WATTS/K WATTS/K

MAX SPEED (1090 RPM) 680 RPM 440 RPM

Single Coil

WRC112BECA 12040 11470 11250 9150 8720 8550 6670 6360 6230

WRC123BECA 14200 13530 13270 9970 9510 9320 6680 6370 6240

WRC167BECA 17730 16900 16570 13620 12980 12720 9990 9520 9330

WRC185BECA 20860 19880 19490 14850 14150 13880 10030 9560 9370

WRC225BECA 23270 22190 21750 17930 17100 16760 13190 12580 12330

WRC247BECA 27050 25790 25280 19460 18550 18190 13210 12600 12350

WRC277BECA 28040 26730 26200 22010 20980 20570 16410 15640 15330

WRC307BECA 32550 31030 30420 23950 22830 22380 16510 15740 15430

Double Coil

WRC224BECA 24070 22950 22500 18290 17440 17090 13340 12710 12460

WRC246BECA 28390 27070 26530 19950 19020 18640 13360 12740 12490

WRC335BECA 35460 33810 33140 27230 25960 25450 19980 19040 18670

WRC369BECA 41710 39760 38980 29690 28310 27750 20060 19120 18750

WRC449BECA 46550 44370 43500 35870 34190 33520 26390 25150 24660

WRC493BECA 54100 51570 50560 38920 37100 36370 26430 25190 24700

WRC554BECA 56070 53450 52410 44030 41970 41150 32810 31280 30670

WRC614BECA 65110 62060 60850 47890 45660 44760 33020 31480 30860

* Basic Capacity- Given in kWatts per degree TD based on 8KTD for ease of selection.

800MM AXITOP EC FANS

KIRBY WRC EC REMOTE SERIES CONDENSERS - NOW WITH AXITOP

The Kirby Remote Condenser is the market leading condenser and most energy efficient unit of its type. Recognised for its technical excellence and efficiency by AIRAH, the Kirby WRC has been specifically designed for supermarkets and other applications with low noise and energy savings in mind.

The WRC has been further enhanced with the EBM Axitop to provide improved energy efficiency (lower input power), lower noise and increased capacity on a proven condenser platform. The EBM-Axitop models with suffix 'BECA' provides additional airflow at the same blade speed (RPM), this results in additional capacity and lower energy equalling improved COP and power / cost savings for the end user. The other benefit of the Axitop is that there is a significant redusction in noise at the same blade speed (RPM), this allows end users to increase the speed of the condenser fans acheiving capacity and not increasing the noise. The combination of the EBM EC Motors and the Axitop Diffuser provide the ability to select condenser at a speed, capacity or noise condition that suits your customers needs. The Axitop product is also available as a retrofit to existing WRC condensers, for further information of for a copy of Selection software please contact your Heatcraft representative.

The new WRC-BEC models now offer high efficiency performance and reduced energy costs. For further information, please contact your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36



ent

KIRBY WRC AXITOP CONDENSERS - PRICING


List Price WRC BECA Blue Kote

Single Coil

WRC112BECA WRC 4 ROW 2 FAN 1 COIL $24,584.47








Double Coil









REMOTE CONDENSERS (CONT'D)



S1: R

efrig

erat

ion

Eq

uipm

entKIRBY CONDENSERS

KIRBY MXW EC - HIGH EFFICIENCY 'W' SHAPED MICROCHANNEL COIL / REMOTE CONDENSERS

Kirby MXWEC Condenserwith microchannel coil technology

110kW 1116kW

Low noise levelEnvironment

For more information on

the Kirby MXW EC Condenser range, contact Heatcraft

on 13 23 50

MXW is the latest range of air cooled condensers from Kirby that offer both a compact footprint and reduced refrigerant charge through the combination of original design and innovative technology.Features

• The condensers are built as modules around W-shaped microchannel coils for ease of installation especially in confined spaces

• Offers up to 75% refrigerant charge reduction compared to traditional designs

• The modular construction allows each module to be field connected independently even with different refrigerants in the one unit

• A unique sound wall and EC motor design gives up to 10dB(A) sound reduction in the horizontal plane Optimised footprint, reduced refrigerant charge, sleek and innovative design make this Kirby MXW range a perfect remote condenser choice for all direct expansion application projects.

ENGINEERED MATCHED FEATURES

Casing

• Casing made of galvanised steel sheet metal painted with a white RAL 9002 powdered polyester paint

Coil

• The MXW range is equipped with aluminum microchannel heat exchanger offering reliability and robustness (high mechanical fin resistance) and high corrosion resistance

EC motors

• High reliability electronic switching fan motors (EC) are standard and enable optimised operation of your system

ADVANTAGES

Installation

• Optimisation of installation costs

• Minimised Footprint

• Ideal for use is an urban environment

Servicing

• Use of high pressure cleaners for easy coil servicing

Maintenance

• Easy access to the coil makes maintenance easier. The modules are composed of two coils easily removable for service or replacement

MULTI CIRCUITS OPTION AVAILABLE

56 dBA

5 meters - 830 kW

46 dBA **

Guards shown are an option, model numbers with guards include a 'G' suffix to the listed part numbers. E.g. MXW###-#VG. Pricing for this configuration is POA.

Capacity multipliers for refrigerant types are shown below, for other rating conditions please contact your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36To better understand this product please contact your local Heatcraft representative, a payback calculator can help you understand the long term savings that this product can offer



ent

Part NumberV-Modules x

No.of EC Fans Capacity /

PowerMax.RPM

(1050)880 RPM

680 RPM

440 RPM

R404A Flooded Refrigerant Charge

kg. Price

R404A

MXW223-2V 2 X 2Q 223.1 205.2 168.8 114.2

18.58 $54,605.23 P 8.5 5.6 2.5 0.8

MXW335-3V 3 X 2Q 334.7 307.8 253.2 171.2

29.80 $78,643.97 P 12.7 8.4 3.7 1.2

MXW446-4V 4 X 2Q 446.3 410.4 337.6 228.3

41.86 $101,814.21 P 17.0 11.2 5.0 1.7

MXW558-5V 5 X 2Q 557.8 513.0 422.0 285.4

58.37 $126,116.53 P 21.2 13.9 6.2 2.1

MXW669-6V 6 X 2Q 669.4 615.6 506.4 342.5

72.16 $151,045.18 P 25.5 16.7 7.5 2.5

MXW781-7V 7 X 2Q 781.0 718.1 590.7 399.6

84.21 $173,917.29 P 29.7 19.5 8.7 2.9

MXW893-8V 8 X 2Q 892.5 820.7 675.1 456.6

100.47 $198,739.09 P 34.0 22.3 9.9 3.3

MXW1004-9V 9 X 2Q 1004.1 923.3 759.5 513.7

108.81 $219,133.83 P 38.2 25.1 11.2 3.7

MXW1116-10V 10 X 2Q 1115.7 1025.9 843.9 570.8

116.65 $239,837.32 P 42.5 27.9 12.4 4.2

R134a

MXW223-2V 2 X 2Q 223.1 205.2 168.8 114.2

21.41 $54,605.23 P 8.5 5.6 2.5 0.8

MXW335-3V 3 X 2Q 334.7 307.8 253.2 171.2

34.33 $78,643.97 P 12.7 8.4 3.7 1.2

MXW446-4V 4 X 2Q 446.3 410.4 337.6 228.3

48.22 $101,814.21 P 17.0 11.2 5.0 1.7

MXW558-5V 5 X 2Q 557.8 513.0 422.0 285.4

67.24 $126,116.53 P 21.2 13.9 6.2 2.1

MXW669-6V 6 X 2Q 669.4 615.6 506.4 342.5

83.13 $151,045.18 P 25.5 16.7 7.5 2.5

MXW781-7V 7 X 2Q 781.0 718.1 590.7 399.6

97.00 $173,917.29 P 29.7 19.5 8.7 2.9

MXW893-8V 8 X 2Q 892.5 820.7 675.1 456.6

115.74 $198,739.09 P 34.0 22.3 9.9 3.3

MXW1004-9V 9 X 2Q 1004.1 923.3 759.5 513.7

125.34 $219,133.83 P 38.2 25.1 11.2 3.7

MXW1116-10V 10 X 2Q 1115.7 1025.9 843.9 570.8

134.38 $239,837.32 P 42.5 27.9 12.4 4.2

Q - Capacity Kw Heat Rejection @10 KTD P - Power Input Kw /Hr.

Conversion Factors To Other Refrigerants - Ratio to R404AR404A R410A R22 R407F R407C R134a

1 1.02 0.96 0.95 0.87 0.93

KIRBY MXW- EC HIGH EFFICIENCY WITH BLOCK MICROCHANNEL REMOTE CONDENSERS (CONT'D)



S1: R

efrig

erat

ion

Eq

uipm

ent

NRG is the latest range of air cooled condensers from Kirby that offer both a compact footprint and reduced refrigerant charge through the combination of original design and innovative technology.

KEY BENEFITS

Refrigerant Charge Reduction

• Microchannel coils offer a very high primary to secondary surface area ratio. This provides very efficient heat exchange while maintaining a low internal tube volume. As a result, the microchannel condenser reduces condenser refrigerant charge by over 70%

Energy Efficient

• The microchannel air-cooled condensers are available with variable speed EC motors. Which vary speed based on system requirements to provide optimal energy and sound performance. These condensers are also available with VFD compatible AC motors.

Corrosion Resistance

• The mono-metal construction of the microchannel coils virtually eliminates the risk of galvanic corrosion. Coil coating is standard on all coils provides additional corrosion resistance for harsh environments.

Sound

• Microchannel air-cooled condensers feature quiet variable speed EC fan motors as a standard.

Lighter Weight

• Over 30% lighter than comparable round-tube, plate fin air-cooled condensers.

Lower Height

• Approximately 25% lower cabinet height (with same clearance) than comparable round-tube, plate fin condensers.

STANDARD FEATURES

• Powder Coated Galvanised Sheetmetal Construction

• Microchannel Heat Exchanger

• Special Coil Coating For Extra Protection In Harsh Conditions

• R404A,R134A,R410A R407F,R407C,R22 Compatible

• #415/3/50hz Power Supply

• Electrical Control Box -Access

• Factory Prewired EC Fans- Control and Main Power Circuits Terminated at Electrical Control Box.

• Factory Installed Manifolding -Single circuit

• Copper Connection Points With Shrader Access Points

• Internal Baffle Between All Fan Cells

• Removable End Access Panels For Cleanining and Service

• Configerable Rerfrigeration Circuit / Split(s) to main Header.

Factory Fitted Mechanical And Electrical Options Are Available On Request - For Assistance Please Contact Your Local Heatcraft Branch.

KIRBY CONDENSERS

KIRBY NRG EC - HIGH EFFICIENCY MICROCHANNEL COIL REMOTE CONDENSERS


ent


R404A

Total Heat Rejection Capacity

Watts/K based on 32°C AMB, 50°C COND, 3K S/C Noise Data

R404A Flooded

Refrigerant Charge kg. PricePart Number

Modules x No.of 710mm EC Fans

Max.Fan Speed

Air flow L/S.

70% Fan Speed

Air flow L/S.

50% Fan Speed

Air flow L/S.

LpA @3m AS/ISO

dB(A) Max. Fan Speed

NRG067 1 x 2 6675 6465 5035 4320 3730 2925 66.5 4.53 $14,751.61

NRG134 2 x 2 13350 12390 10070 8640 7460 5850 69.5 9.06 $26,991.11

NRG200 3 x 2 20025 19395 15105 12960 11190 8775 71.3 13.59 $39,839.35

NRG267 4 x 2 26700 25860 20140 17280 14920 11700 72.5 18.12 $51,799.51

R134A

Total Heat Rejection Capacity

Watts/K based on 32°C AMB, 50°C COND, 3K S/C Noise Data

R404A Flooded

Refrigerant Charge kg. PricePart Number

Modules x No.of 710mm EC Fans

Max.Fan Speed

Air flow L/S.

70% Fan Speed

Air flow L/S.

50% Fan Speed

Air flow L/S.

LpA @3m AS/ISO

dB(A) Max. Fan Speed

NRG067 1 x 2 6200 6465 4680 4320 3465 2925 66.5 4.53 $14,751.61

NRG134 2 x 2 12400 12390 9360 8640 6930 5850 69.5 9.06 $26,991.11

NRG200 3 x 2 18600 19395 14040 12960 10395 8775 71.3 13.59 $39,839.35

NRG267 4 x 2 24800 25860 18720 17280 13860 11700 72.5 18.12 $51,799.51

Refrigerant Capacity Correction Factors - Ratio to R404A Refrigeration R502 R134a R507 R407B R407C

Factor 0.96 0.93 0.976 0.92 0.90

Divide the calculated THR by the appropriate factor to find the required THR at rating condition (R404A) Pre-coated all-aluminium microchannel coil is standard offer. Plain coil not available.

REFRIGERANT CORRECTION FACTORS - Factors are an average of all models and may vary slightly over the range of KTD, however the above figures are sufficiently accurate for most system selection purposes.

KIRBY NRG - EC HIGH EFFICIENCY MICROCHANNEL REMOTE CONDENSERS (CONT'D)

Capacity multipliers for refrigerant types are shown below, for other rating conditions please contact your Heatcraft Technical Specialist (1800 132 350), refer to advertisement on page 36 To better understand this product please contact your local Heatcraft representative, a payback calculator can help you understand the long term savings that this product can offer

Lennox_ATLC_Oventrop_Ad_v3.indd 1 29/07/2013 1:25:38 PM

Lennox_ATLC_Oventrop_Ad_v3.indd 1 29/07/2013 1:25:38 PM



ent

LENNOX ECOLEANTM EAC CHILLERS (20 TO 200KW)

The new generation of ECOLEAN offers an optimal solution to all liquid chilling applications. It can be used for air conditioning applications in light commercial and retail applications or easily configured for glycol chilling applications in the food / production industry.

This range incorporates the latest technologies to ensure high efficiency performance all year round thanks to R410A refrigerant, multi scroll compressors, optimised heat exchange surface area, eDrive™ variable speed water pump (optional) and Climatic 60 control system. Units are supplied pre-charged with R410A refrigerant for optimal performance.

Lennox has designed ECOLEAN targeting the lowest market level. This has been achieved by research and development innovations both on new fan blade technologies and noiseless compressor mountings. ECOLEAN is achieving the best market acoustic performance thanks to the use of the latest generation of OWLET™ fans associated with acoustic compressor enclosure.

AIR TO WATER LIQUID CHILLER AND HEAT PUMPS

ECOLEANTM 251 291 351 431 472 552 672 812 1003 1103 1203 1303 1403 1604 1804 2104

Cooling capacity (1) kW 22 26 32 38 44 51 63 75 88 102 112 126 139 149 174 199

EER 2.9 2.8 2.8 2.8 2.7 2.8 2.8 2.8 2.8 2.9 2.8 2.8 2.8 2.7 2.9 2.8

Heating capacity (2) kW 24 28 34 38 48 55 68 76 95 108 118 130 143 159 180 205

COP 3.0 3.0 3.0 2.9 3.0 2.9 3.0 2.9 3.0 3.0 3.0 2.9 2.9 3.0 2.9 2.8

Length mm 1195 1960 2250

Width mm 980 1195 1420 2300

Height mm 1616 2155 2250

Operating Weight EAC kg 238 246 263 292 470 482 518 562 640 809 938 990 1019 1328 1683 1703

Operating Weight EAR kg 243 251 271 300 480 492 534 578 663 831 964 1016 1045 1347 1703 1723

Nominal conditions: (1) water 12/7°C, air 35°C (2) water 40/45°C, air 7°C

Equipment EAC (Cooling only) EAR (Heat pump)

Scroll compressors, brazed plate heat exchanger, copper/aluminium condenser coil with epoxy coat, two-speed fans, R410A refrigerant, main switch, CLIMATIC control, customer display, water filter protection grilles and all-season airflow controller.

Standard

Hydraulic module with single pump and expansion tank HY Version

Hydraulic module with single pump, expansion tank and buffer tank HN Version

Low speed fans and acoustic compressor jacket LN Version

Low speed fans and high performance acoustic compressor housing SLN version

e-Drive™ variable primary water flow Option Option

Twin pump Option Option

Electric water tank heaters - Option

Partial heat recovery Option Option

Acoustic compressor jacket (standard version only) Option Option

Evaporator anti-freeze heater Option Option

Low temperature operation down to -10°C (Glycol application) Option -

Cooling down to -15°C outside air temperature Option -

Anti-corrosion coil treatment Option Option

Electronic expansion valves Option Option

Electronic starter/Phase Controller Option Option

Remote display/Modbus/Bacnet/ Lonworks/Adalink™ Option Option

Anti-vibration mounts Option Option

For quotations or further information on any of the above Ecolean™

chillers please contact your local

Heatcraft outlet.

Chillers

20kW 200kW

Lennox ECOLEAN™ Air to Water Liquid Chiller and Heat Pump



S1: R

efrig

erat

ion

Eq

uipm

ent

COOLING ONLY UNITS (EAC)

FOR QUOTATIONS OR FURTHER INFORMATION ON ANY OF THE ABOVE ECOLEAN™ CHILLERS PLEASE CONTACT YOUR LOCAL HEATCRAFT OUTLET

NAC 200 > 340 380 420 - 480 540 600 > 680 760 840 - 960 1080

Min. outlet water temperature oC 5

Min. outlet water temperature with brine operation option

oC -10

Max. inlet water temperature oC 20

Min. difference water inlet/outlet oC 3

Max. difference water inlet/outlet oC 8

Min. outside air temperature oC 6

Min. outside air temperature with winter operation option

oC -20

Max. outside air temperature with full capacity operation

oC 46 43 46 43 46 43 46 43



ent

LENNOX NEOSYS™ AIR-COOLED LIQUID CHILLER (200-1000KW)

Neosys is another innovation from Lennox - the name you can trust in cooling.

Neosys uses scroll compressors, microchannel condensers and refrigerant R410A for superior efficiency and reliability. With its smart aesthetics and low noise levels, Neosys is a discrete liquid chiller solution that is delivered to you ready to go.

• Suitable for most chilled liquid applications from +20°C inlet to +5°C outlet (-10°C glycol version available)

• Utilises compliant scroll compressor technology

• R410A refrigerant pre-charged for optimal performance

• Microchannel condensers for improved reliability and a 30% reduction in refrigerant charge

• Smart acoustics utilising inverter fans

• Hydraulic options available

• Low unit height (< 2m)

• Graduated capacity control to better meet the required capacity

Equipment NAC (Cooling only) *NAH (Heat pump)

Scroll compressors, brazed plate water heat exchanger, micro-channel air heat exchangers (cooling only) or copper/aluminium (heat pump), OWLET™ variable speed fans, R410A refrigerant, Butterfly™ electrical panel, main switch, CLIMATIC control™, Active Acoustic Attenuation System™, customer display, water filter and electronic flow switch, Victaulic™ connections, all protection grilles, 3 year guarantee on main parts. Full Hydraulics form part of standard delivery up to 640kW. Neosys also uses a true twin circuit braised plate heat exchanger as the evaporator.

Standard

Hydraulic module with single or twin low pressure pump Option Option

Hydraulic module with single or double low pressure pump Option Option

Hydraulic module, e-Drive™ single high pressure variable speed pump Option Option

Hydraulic module, double e-Drive™ high pressure variable speed pump Option Option

Anti-freeze heater Option Option

Winter operation down to -20°C ambient temperature (Including electronic expansion valve) Option -

Operation for low temperature glycol down to -10°C (Including electronic pressure reducing valve) Option -

Partial heat recovery Option Option

“Free cooling” module, 1x V or 2x V Option Option

Flange connection /Anti-vibration mounts Options Options

Thermoguard™/Blygold™ anti-corrosion condenser coil treatment Option Option

Energy meter/Electronic starter/Power factor correction Options Options

Remote display/Modbus/Bacnet/ Lonworks/Adalink™ Options Options

NEOSYSTMNAC 200 230 270 300 340 380 420 480 540 600 640 680 760 840 960 1080

NAH 200 230 270 300 340 420 480 - - - - - - - -

Cooling capacity (1) kW 208 236 273 308 351 387 430 490 531 605 627 702 775 860 930 1062

EER 2.9 2.7 2.6 2.9 2.8 2.6 2.8 2.8 2.6 2.8 2.8 2.8 2.6 2.8 2.8 2.6

ESEER 4.2 4.0 4.0 4.0 4.2 3.9 4.2 4.0 4.0 4.2 4.2 4.2 3.9 4.2 4.0 4.0

Heating capacity (2) kW 219 252 313 346 370 410 459 509 - - - - - - - -

COP 3.1 3.0 3.0 3.0 3.0 3.0 3.0 3.0 - - - - - - - -

Length NAC mm 3590 4620 5650 6680 9040 11100

Length NAH mm 3590 4620 5650 -

Width / Height mm 2280 / 1964

Operating Weight kg 1984 2011 2259 2648 2938 3010 3512 3621 3621 3992 4030 6720 6860 8000 8160 8160

Nominal conditions: (1) water 12/7°C, air 35°C (2) water 40/45°C, air 7°C

For quotations or further information on any of the above Ecolean™

chillers please contact your local

Heatcraft outlet.

LIQUID CHILLER 200kW 1000kWHEAT PUMP 200kW 500kW

NEOSYS™ Air to Water Liquid Chiller and Heat PumpEnergy efficiency acoustic performance



S1: R

efrig

erat

ion

Eq

uipm

ent

FOR QUOTATIONS OR FURTHER INFORMATION ON ANY OF THE ABOVE ECOLEAN™ CHILLERS PLEASE CONTACT YOUR LOCAL HEATCRAFT OUTLET

NAC 200 > 340 380 420 - 480 540 600 > 680 760 840 - 960 1080

Min. outlet water temperature oC 5

Min. outlet water temperature with brine operation option

oC -10

Max. inlet water temperature oC 20

Min. difference water inlet/outlet oC 3

Max. difference water inlet/outlet oC 8

Min. outside air temperature oC 6

Min. outside air temperature with winter operation option

oC -20

Max. outside air temperature with full capacity operation

oC 46 43 46 43 46 43 46 43



ent

Pressure VesselsRECEIVERS - HEAVY DUTY (Complete with Full Flow Rotalock Valves (RL.) + Gaskets & Flanged Valves where nominated)

Part Number

Inlet & Outlet Connections ODS

Dimensions (mm) Pump Down Capacity (kg) 80% Full @ 32°C R404A / R134a

List PriceDiameter Length

Horizontal Complete with 3 off Liquid Sight Glasses ( **2 off only where nominated) + Liquid Level Conn. Port + PRV Conn. Port

HR35-1 3/4" RL.** 219 1355 42 / 36 $1,787.00

HR60-3 1-3/8" RL.** 280 1387 66 / 56 $2,287.14

HR80-3 1-5/8" RL.** 356 1170 95 / 81 $4,311.58

HR100-54FLG 2-1/8" Flange 356 1427 109 / 81 $5,020.18

HR130-54FLG 2-1/8" Flange 406 1465 155 / 132 $5,473.83

HR180-54FLG 2-1/8" Flange 457 1555 209 / 177 $7,149.73

HR200-67FLG 2-5/8" Flange 457 1757 233 / 200 $7,828.33

Vertical

VR35-2 3/4" RL.** 273 906 41 / 35 $1,787.00

VR60-3 1-3/8" RL.** 273 1406 66 / 56 $2,223.61

VR80-3 1-5/8" RL.** 356 1185 98 / 82 $4,311.58

VR100-3-FLG 1-5/8" x 2-1/8" Flange 356 1481 123 / 104 $5,286.37

VR100-54FLG 2-1/8" Flange 356 1481 123 / 104 $5,020.18

VR130-54FLG 2-1/8" Flange 400 1481 157 / 133 $5,473.83

VR180-54FLG 2-1/8" Flange 457 1567 209 / 177 $7,149.73

VR200-54FLG 2-5/8" Flange 457 1757 233 / 200 $7,828.33

• Vessels conform to AS1210 Standard

• Vessels are painted enamel finish and include service connection valves

OIL SEPARATORS - STANDARD

Part Number

Conn. Size ODS

Conn. Tube Centres(mm)

Dimensions(mm) Nominal Capacity (kW) Max.Working Press.(kPa)

Oil Charge (ml)

List PriceDiameter Length R404a/R134a @ 0°C SST.

Heldon

3210-6406 3/8" 48 102 280 5000 3500 480 $338.54

3210-6408 1/2" 48 102 280 6500 3500 480 $381.22

3210-6410 5/8" 48 102 339 17500 3500 480 $397.42

3210-6414 7/8" 48 102 384 26600 3500 480 $434.21

3210-6418 1-1/8" 48 102 415 35000 3500 480 $454.82

3210-9622 1-3/8" 75 153 395 48300 3500 1230 $666.51

3210-9626 1-3/8" 75 153 479 60500 3500 1230 $735.95

3210-9634 2-1/8" 75 153 487 102200 3500 1230 $772.41



S1: R

efrig

erat

ion

Eq

uipm

ent

ADVANTAGES

• Latest in oil separator technology

• Temprite Standard Filter technology cleans contaminants down to 0.3 microns in size and aerosols in liquid form to .001 microns.

• Particularly compatible with ammonia (NH3) refrigerant systems; designed for 650 PSI

• Maintains the same level of effectiveness down to 20% of maximum flow

• Easy accessibility to the filter for changes

• Equal 98.5+% efficiency in all types of systems; in ultra-low temperature applications; even or uneven multiplex systems, split suction groups systems, low, medium and A/C; during refrigeration load shifting/matching.

• High efficiency performance reduces energy consumption through better heat transfer through the coils, translating

into significant kW savings.

• Maximises protection against the compressor running dry or oil slugging

• 920 Series models designed for use with an external reservoir

• 920R Series have internal oil reservoirs, maximising space and eliminating attendant reservoirs, check valves and leak-causing equalisation lines.

OPERATION

Temprite 920 and 920R Series coalescent oil separators employ a matrix-type borosilicate coalescent filter to do the work formerly done by impingement screens. These exceptionally pure, extremely fine glass fibres cause the oil molecules to collide, creating bigger droplets, until each is large enough to be forced to the outer drain layer of the filter. The droplets fall to the bottom of the separator and the oil is returned to the compressor.

In large parallel rack/multiplex systems with long lines, dirt and excess oil put an even greater drag on the system. This can be eliminated with the 920 or 920R Series coalescent oil separator because the Temprite Standard Filter is finer than any other filter/dryer, picking up all effluent and dirt in the system down to 0.3 microns in size, increasing system capacity and efficiency and lowering energy costs. Conventional centrifugal and impingement screen oil separators only work to 100 microns, thus missing 50% of the aerosols in the mass flow of the refrigerant.

Part Number

Inlet & Outlet

Connections ODS / Model

Capacity (kW) Max. Work. Press. (kPa)

Oil Charge

(ml)List

Price

R404A/R507 R22 R134a R410 Ammonia Co2 Sub-Critical

Evaporator Temperature °C

-40 +4.4 -40 +4.4 -23.3 +4.4 -40 +4.4 -40 +4.4 -40 +4.4

Temprite Coalescent Oil Separator - Accessible

092200000 5/8" (922) 4.7 30.6 5.7 31.2 6.2 19.9 8.4 45.5 5.3 35.0 10.8 70.6 *3102 475 $862.17 0923000 00 7/8" (923) 6.5 42.6 7.9 43.4 8.7 27.7 11.6 63.3 7.3 48.8 15.1 98.1 4482 475 $882.67 092400000 1-1/8" (924) 11.7 76.5 14.1 78.1 15.6 49.9 20.9 113.7 13.3 87.8 27 176.1 *3102 475 $1,060.54 092500000 1-3/8" (925) 17.9 116 21.5 117 23.7 75.8 31.7 172.9 20.2 133.5 41.5 267.9 4482 475 $1,074.25 092600000 1-5/8" (926) 30.6 199 36.8 203 40.5 130 54.3 295.8 34.6 228.6 70.3 450.2 4482 1.0 Ltr $2,121.14 092601000 1-5/8" (926R) 30.6 199 36.8 203 40.5 130 54.3 295.8 34.6 228.6 70.3 450.2 4482 6.7 Ltr $2,146.72 092700000 2-1/8" (927) 41.7 272 50.2 277 55.3 177 73.9 403.0 47.2 311.6 96 624.7 4482 1.0 Ltr $2,182.63 092701000 2-1/8" (927R) 41.7 272 50.2 277 55.3 177 73.9 403.0 47.2 311.6 96 624.7 4482 6.7 Ltr $2,257.98 092800000 2-5/8" (928) 69.7 453.7 84 463 92.4 295.6 123.5 673.4 47.2 311.6 160.4 1043.6 4482 1.0 Ltr $4,697.08 092801000 2-5/8"(928R) 69.7 453.7 84 463 92.4 295.6 123.5 673.4 47.2 311.6 160.4 1043.6 4482 7.55 Ltr $5,067.06 Note: Oil reservoir models (Nil float) are denoted by suffix "R" * Please check MWP required - High Pressure models available on request

55100005 Temprite Replacement Oil Filter-Flange Gasket - Suits Models 922 & 923 $40.81 62034000 Temprite Replacement Oil Filter-Suits Models 922 & 923 $141.59 62037000 Temprite Standard Oil Filter-Suits Models 924/925 & 924R/925R $264.26 62028000 Temprite Standard Oil Filter-Suits Models 926/926R & 927/927R $528.44 62051000 Temprite Standard Oil Filter-Suits Models 928/928R $688.89 040B0010 Oil Separator (Danfoss OUB1 - 3/8"FL Union Connections) $1,178.88 003658000 Temprite Oil Return Float (Demountable) $946.23 3458 Float High Side $572.43 003358000 Temprite Oil Return Float – Hermetic: BitzerM/Fit (Order with1off Rotalock Elbow Connection 3/8"IDX3/4"SSP/N.263-0612) $458.20 224-PDI Pressure Differential Indicator Model 224 (650psi operating pressure) $427.26

OIL SEPARATORS – TEMPRITE COALESCENT ACCESSIBLE



ent

SUCTION ACCUMULATORS – STANDARD

Part Number

Conn. Size ODS

Dimensions (mm) Liq. Holding Capacity (L)

Work. Pressure (kPa)

List PriceDiameter Length

3100-104016 5/8" 102 218 1.8 2500 $243.25

3100-124016 3/4" 102 244 1.6 2500 $243.25

3100-125029 3/4" 127 288 2.4 2500 $256.76

3100-145034 7/8" 128 300 3.4 2500 $262.77

3100-186055P 1-1/8" 159 390 5.5 2500 $429.43

3100-186063 1-1/8" 159 470 6.3 2500 $472.97

3100-226071 1-3/8" 159 460 7.1 2500 $532.52

3100-266510 1-5/8” 160 575 10.5 2500 $415.11

3100-348615 2-1/8” 219 533 15 2500 $984.87

3100-421125 2-5/8” 273 522 25 2500 $1,553.87

3100-501135 3-1/8” 273 683 35 2500 $1,805.84

OIL SEPARATORS – NEW HELICAL HEAVY DUTY RANGE

Part Number

Conn. Size ODS

Oil Return RLV ODS

Nominal Capacity Kw Dimensions(mm) Oil changes Litres List PriceR134/R404A@+5Csst. Dia. Length Min/Max

S-5387-AU 7/8" 3/8" 20.64 / 25.90 168 750 3.0 / 6.0 $1,792.76

S-5388-AU 1-1/8" 3/8" 30.81 / 38.65 168 750 3.0 / 6.0 $1,792.76

S-5390-AU 1-3/8" 3/8" 48.9 / 57.69 168 855 3.0 / 6.0 $1,792.76

S-5392-AU 1-5/8" 3/8" 67.18 / 80.55 168 855 3.0 / 6.0 $2,026.68

S-5394-AU 2-1/8" 3/8" 103.41 / 124.52 168 855 3.0 / 6.0 $2,078.21

S-5302-AU 2-1/8" 3/8" 123.10 / 148.08 219 694 6.3 / 9.5 $2,425.15

S-5303-AU 2-5/8" 3/8" 204.36 / 251.85 273 770 6.3 / 9.5 $2,524.77

S-5304-AU 3-1/8” 3/8" 299 / 369.68 305 770 6.3 / 9.5 P.O.A.



S1: R

efrig

erat

ion

Eq

uipm

ent

LIQUID RECEIVERS – STANDARD

Part Number

Connections Dimensions (mm) Volume Work. Press. (kPa) List PriceInlet ODS Outlet MF Diameter Length (L)

3310-064724A 3/8" I.D.Solder 3/4"ODS. R/LOCK 120 250 2.4 3000 $227.60

3310-084724 1/2" I.D.Solder 3/4"ODS. R/LOCK 120 250 2.4 3000 $200.94

3310-105544 1/2" I.D.Solder 3/4"ODS. R/LOCK 140 340 4.4 3000 $222.41

3310-167082 1"ODS. R/LOCK 1"ODS. R/LOCK 180 400 8.2 3000 $664.16

3310-1670109 1"ODS. R/LOCK 1"ODS. R/LOCK 180 510 10.9 3000 $717.84

3310-1686145 1" ODS R/LOCK 1"ODS. R/LOCK 220 415 14.5 3000 $1,047.99

ACCESSORIES


S-9420 SWITCH LIQUID LEVEL(AC&R)HENRY $590.80

AV-15504-400PSI PRV 1/2MNPT x 5/8MF 2.76MPA $317.09

AV-15504-450PSI PRV 1/2MNPT x 5/8MF 3.00MPA $326.41

AV-15506-425PSI PRV 3/4MNPT x 3/4FNPT 3.00MPA $388.12

2701-080808 PRV Manifold - Dual Outlets $438.79

2740-0808-400 PRESS BURST DISC.400PSI $389.33

2740-0808-425 RUPTURE DISC - MUELLER - 1/2" $671.98

2740-0808-gauge HELDON RUPTURE DISC GAUGE $128.27

2740-SWITCH RUPTURE DISC SPST-ALARM SWITCH $398.34

STOCKED ITEMS

Part Number Description Availability List Price

DN2C300SE FX HOSE 2X300MM 1/4FSAE ST/EL Stocked Item $64.93





INTERLINK QUADRA CAPILLARY HOSES - 2MM ID SUITABLE FOR 120 BAR SYSTEMS

SU I TA B LE

CO2CO2120bar

All QUADRA capillary hoses and fittings (DN2, DN4 and DN6 included), now can be used with CO2 up to 120 bar / 1740 psi from -45°C up to +130°C Meets UNI EN 1736 standards. Suits all HFC and HCFC refrigerants plus CO2.

DN2 and DN6 stocked 300, 600, 900 and 1200. ST/ST, ST/EL, EL/EL

Special orders available for quantity.

Quadra is a product of Oil Transfer S.p.A

• Thermoplastic Polymer Inner Tube

• Polyester braid reinforcing

• Thermoplastic Polymer Cover (Orange)



ent

INTERLINK QUADRA HOSES

CUSTOMER ORDER


DN2C300SS FX HOSE 2X300MM 1/4FSAE ST/ST Customer Order $50.54




DN2C300EE FX HOSE 2X300MM 1/4FSAE EL/EL Customer Order $77.00



DN2C1200EE FX HOSE 2X1200MM 1/4FSAE ST/EL Customer Order $93.71









Note - all straight fittings have schraeder depressor to allow change without system pump down




STOCKED ITEMS


110kW 1116kW


> The condensers are built as modules around W-shaped microchannel coils for ease of installation especially in confined spaces

> Offers up to 75% refrigerant charge reduction compared to traditional designs

> The modular construction allows each module to be field connected independently even with different refrigerants in the one unit

> A unique sound wall and EC motor design gives up to 10dB(A) sound reduction in the horizontal plane

Optimised footprint, reduced refrigerant charge, sleek and innovative design make this Kirby MXW range a perfect remote condenser choice for all direct expansion application projects.

MXW is the latest range of air cooled condensers from Kirby that offer both a compact footprint and reduced refrigerant charge through the combination of original design and innovative technology.


110kW 1116kW


> The condensers are built as modules around W-shaped microchannel coils for ease of installation especially in confined spaces

> Offers up to 75% refrigerant charge reduction compared to traditional designs

> The modular construction allows each module to be field connected independently even with different refrigerants in the one unit

> A unique sound wall and EC motor design gives up to 10dB(A) sound reduction in the horizontal plane

Optimised footprint, reduced refrigerant charge, sleek and innovative design make this Kirby MXW range a perfect remote condenser choice for all direct expansion application projects.

MXW is the latest range of air cooled condensers from Kirby that offer both a compact footprint and reduced refrigerant charge through the combination of original design and innovative technology.


Documents

2014 Heatcraft Australia Refrigeration Equipment Price Guide