2013–2014toa.com.br/wp-content/uploads/2015/03/TOA-2013_2014_products_li… · Type H Series Type T Series Compact Array Speakers Type S Series Subwoofers Floor Monitor Speakers

PRODUCTSCATALOG

L I N E U PL I N E U P

2013–2014SOUND & COMMUNICATION

1

Contents

Speaker Index ........................................................................................2

Voice Evacuation Systems ...................................................................4

Rack Mount Equipment and Others ....................................................19

Network-Related Systems ....................................................................23

IP Network Intercoms .......................................................................... 24

Digital Power Amplifiers .......................................................................34

Amplifiers ..............................................................................................37

Mixers ....................................................................................................48

Signal Processing Equipment .............................................................52

Pro-Sound Speakers ............................................................................54

Commercial Sound Speakers ..............................................................67

Conference Systems ............................................................................78

Wireless Microphone Systems ............................................................82

Wired Microphones ..............................................................................89

Megaphones ..........................................................................................92

Speaker Mounting Accessories Set-Up Chart ..............................................95

Metal Rack-Mount Selection Chart .......................................................100

List of CE-Certified Models ...................................................................102

List of UL-Certified Models ...................................................................104

Index ....................................................................................................106

IP Grade Panel ....................................................................................110

Appearance of AC Plug and Voltage Name of Version

100 – 120V AC

220 – 240V AC

CU 314LUS UL120 L

CE HV ER 301HH CE301HH

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ents

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

ts

2

Commercial Sound SpeakersPro-Sound Speakers

Type A Series

Full-Range Cabinet Speakers

Reflex Horns Driver Units

SC Series TC Series Ultra-High Power Speaker

Explosion-Proof Horn Speakers

Line Array Speaker Systems

SR (Z-Drive) Series Speakers

ES Series Speakers

H Series Speakers

F Series Speakers

HS Series Speakers

P68

Plane Wave Speakers

Plane Wave Speakers

P68

P69

P59

P59

P59

P56

P54

P55

P58

P57

P57

Ceiling Speakers

Box Speakers

Horn Speakers

Wide Range horn Speakers (Weatherproof)

Column Speakers

SR-A12LSR-A12LWP

SR-A12SSR-A12SWP

SR-S4LSR-S4LWP

SR-S4SSR-S4SWP

SR-A18BSR-C8LSR-C8LWP

SR-C8SSR-C8SWP

SR-C15BSR-C15BWP

Type H Series

Type T Series

Compact Array Speakers

Type S Series

Subwoofers

Floor Monitor Speakers

2-Way Speakers

P60

P60

P61

P60

Flush Mount Ceiling Speaker

Engineered-Sound Speakers

Wide-Dispersion Speakers

P64 – 65

P62 – 63

Wide-Dispersion Ceiling Speakers

P66

Type C Series

HS-120BHS-1200BT

HS-120WHS-1200WT

F-2000BF-2000BTF-2000BTWPF-2000WF-2000WTF-2000WTWP

F-1522SC



HS-150BHS-1500BT

HS-150WHS-1500WT

ES-0422WP

ES-0424WPES-0426WP

ES-0871 ES-0851ES-C0651 FG-C0651

SR-H2L

SR-H3L

SR-H2S

SR-H3S SR-T5

SR-F1D SR-F09 SR-F05SR-L09

HX-5BHX-5B-WP

HX-5WHX-5W-WP

FB-120B FB-120W

SR-L1BSR-M05L/R

H-1H-2/H-2WP

H-3/H-3WPHB-1

F-2852C F-2322C F-2352C F-122CF-2352SC

Separate Type with Spring Catch Speakers

Flush Mount Type Ceiling Speakers

P69Surface Mount Type Ceiling Speakers and Attenuator

Wall Mount Box Speakers

P72 – 73Separate Type Horn Speakers

P73 – 75

P75

P76

Combination Type Reflex Horn Speakers

P72

P70 – 71

Box Type Splash-proof Speakers

P72Universal Speakers

P70Splash-proof Ceiling Speakers

P70Heat-Resistant Horn Speaker

P70Firedome Speakers

PC-2869PC-2852

PC-2369PC-1869 PC-648RPC-658R

CP-73CP-77CM-760 CP-93

CP-97CM-960

PC-2668 PC-2268PC-2268WP

PC-3WRPC-3CL

PC-1867FPC-1867FC

PC-139

BS-1034SBS-634BS-634TBS-1034

BS-678/678BBS-678T/678BT

BS-680FBS-680FC

BS-633ABS-633AT

BS-5WBS-10WL

BS-1030B

BS-1030W

TH-650 TH-660TU-631TU-561

TU-631MTU-561M

SC-630SC-630M

SC-610SC-610M

SC-615SC-615M SC-651

SC-240

TZ-205

GS-302

TP-M15E TP-M15DTC-615TC-615M

TC-631TC-631M

CS-64 CS-154 CS-304TZ-105

Interior Design Speakers

Others

P76Pendant Speakers

P76Projection Speakers

P77Weatherproof Garden Speaker

PE-64PE-304

PJ-64PJ-304

PJ-200WPJ-100W

PW-1430DB/SB PW-1430DW/SW PW-1230DB/SB PW-1230DW/SW

*EN 54-24: Loudspeaker for voice alarm systems for fire detection and fire alarm systems.

BS

BS

32

Commercial Sound SpeakersPro-Sound Speakers

Type A Series

Full-Range Cabinet Speakers

Reflex Horns Driver Units

SC Series TC Series Ultra-High Power Speaker

Explosion-Proof Horn Speakers


SR (Z-Drive) Series Speakers

ES Series Speakers

H Series Speakers

F Series Speakers

HS Series Speakers

P68

Plane Wave Speakers

Plane Wave Speakers

P68

P69

P59

P59

P59

P56

P54

P55

P58

P57

P57

Ceiling Speakers

Box Speakers

Horn Speakers

Wide Range horn Speakers (Weatherproof)

Column Speakers

SR-A12LSR-A12LWP

SR-A12SSR-A12SWP

SR-S4LSR-S4LWP

SR-S4SSR-S4SWP

SR-A18BSR-C8LSR-C8LWP

SR-C8SSR-C8SWP

SR-C15BSR-C15BWP

Type H Series

Type T Series


Type S Series

Subwoofers


2-Way Speakers

P60

P60

P61

P60

Flush Mount Ceiling Speaker



P64 – 65

P62 – 63

Wide-Dispersion Ceiling Speakers

P66

Type C Series

HS-120BHS-1200BT

HS-120WHS-1200WT


F-1522SC



HS-150BHS-1500BT

HS-150WHS-1500WT

ES-0422WP

ES-0424WPES-0426WP

ES-0871 ES-0851ES-C0651 FG-C0651

SR-H2L

SR-H3L

SR-H2S

SR-H3S SR-T5

SR-F1D SR-F09 SR-F05SR-L09

HX-5BHX-5B-WP

HX-5WHX-5W-WP

FB-120B FB-120W

SR-L1BSR-M05L/R

H-1H-2/H-2WP

H-3/H-3WPHB-1

F-2852C F-2322C F-2352C F-122CF-2352SC


Flush Mount Type Ceiling Speakers

P69Surface Mount Type Ceiling Speakers and Attenuator


P72 – 73Separate Type Horn Speakers

P73 – 75

P75

P76


P72

P70 – 71

Box Type Splash-proof Speakers

P72Universal Speakers

P70Splash-proof Ceiling Speakers

P70Heat-Resistant Horn Speaker

P70Firedome Speakers

PC-2869PC-2852

PC-2369PC-1869 PC-648RPC-658R

CP-73CP-77CM-760 CP-93

CP-97CM-960

PC-2668 PC-2268PC-2268WP

PC-3WRPC-3CL

PC-1867FPC-1867FC

PC-139

BS-1034SBS-634BS-634TBS-1034

BS-678/678BBS-678T/678BT

BS-680FBS-680FC

BS-633ABS-633AT

BS-5WBS-10WL

BS-1030B

BS-1030W

TH-650 TH-660TU-631TU-561

TU-631MTU-561M

SC-630SC-630M

SC-610SC-610M

SC-615SC-615M SC-651

SC-240

TZ-205

GS-302

TP-M15E TP-M15DTC-615TC-615M

TC-631TC-631M

CS-64 CS-154 CS-304TZ-105

Interior Design Speakers

Others

P76Pendant Speakers

P76Projection Speakers

P77Weatherproof Garden Speaker

PE-64PE-304

PJ-64PJ-304

PJ-200WPJ-100W

PW-1430DB/SB PW-1430DW/SW PW-1230DB/SB PW-1230DW/SW

*EN 54-24: Loudspeaker for voice alarm systems for fire detection and fire alarm systems.

BS

BS

SX-2000 Series

4

Power Source: Usable power supply unit: VX-200PS/24V DC (operational range: 20V – 40V DC)/Two power inputs construction enables dual- redundant power supply.Current Consumption: 1.1A or less (maximum value in the power operating range)/0.8A or less (when operated on 24V DC)Indication/Operation: SX link access indicator: 2/LAN access indicator: 1/Mode indicator: 3 (EMERGENCY/STANDBY/CPU OFF)/Failure indicator: 3 (GENERAL/CPU/SX LINK)/Power indicator: 1 (POWER)/Run indicator: 1 (RUN)/Failure control switch: 3 (ACK/RESET/LAMP TEST)SX Link: Network I/F: 2 100BASE-TX circuits, RJ45 connectorMatrix System Specification: Bus: 16/Audio input: Max. 64 ch/Audio output: Max. 128 zones/Contact input: Max. 1,416/Contact output: Max. 1,416/Priority control: 512 steps/Event log: Up to 1,000 logs per file (up to 100 files available)/Failure log: Up to 100 logs per file (up to 100 files available)Matrix System Configuration: Connectable SX-2100AI No: Max. 8 units/Connectable SX-2000AO/2100AO No.: Max. 32 units/Connectable SX-2000CI No.: Max. 32 units//Connectable SX-2000CO No.: Max. 32 units/Connectable RM-200SA/SF No.: Max. 64 units (up to 4 RM-200SA per SX-2100AI)Connection Cable/Device:Shielded Category 5 twisted pair cable for LAN (CAT5-STP)(Connect SX-2100AI and SX-2000AO/2100AO via the switching hub specified by TOA)Note: This network must be made completely independent from other LAN.Number of Cascaded Switching Hub: Up to 7Maximum Cable Distance:100m (between this unit and a Number of Switching hubs, or between Number of Cascaded Switching Hubs)LAN:Network I/F: 1 10 BASE-T/100 BASE-TX circuit (selectable by automatic recognition), RJ45 connector for maintenance useNetwork Protocol: TCP/IPConnection Cable: Shielded Category 5 twisted pair cable for LAN (CAT5-STP)Maximum Cable Distance: 100m (between this unit and a switching hub or PC)Analog Link:Input/Output Connector: Output: 2, RJ45 connectorConnection Cable: Shielded Category 5 twisted pair cable for LAN (CAT5-STP) (1 pair of audio wire + 1 pair of CPU OFF + 1 pair of control wire (system reset/standby) + 1 pair of connection check wire)Maximum Cable Distance: Total length of analog audio link: 800m

DS Link:Usable Unit: VX-2000DSConnector/Cable: 2 interface, RJ45 Connector, Shielded Category 5 twisted pair cable (CAT5-STP)Maximum Cable Distance: 5mFailure Data Input: 3 inputs (ACK/RESET/LAMP TEST), no-voltage make contact input, open voltage: 24V DC, short-circuit current: 2mA, photo coupler input, removable terminal block (12 pins)Failure Data Output: 4 outputs (CPU FAULT/GENERAL FAULT/CPU OFF/BUZZER), C contact, no-voltage make contact output, relay contact output (withstand voltage: 40V DC, control current: 2 – 300mA), RJ45 connectorControl Input: 8 inputs, no-voltage make contact input, open voltage: 24V DC, short-circuit current: 2mA, photo coupler input, removable terminal block (12 pins)Surveillance Section for The Control Input Lines: Connection resistance to make the function inactive: 20kΩ ±5%/Connection resistance to make the function active: 10kΩ ±5%/Connector cable: Twisted pair cable (shielded type is recommended)/Maximum cable distance:10mControl Output: 8 outputs, C contact, no-voltage make contact output, relay contact output (withstand voltage: 40V DC, control current: 2 – 300mA), removable terminal block (12 pins)24V DC Output: Output Voltage: 24V DC ±10% or lessMaximum Feeding Current: 100mAMemory Card: Insertion slot: 1 (use of supplied CF card (128MB)), set data and log data storedOperating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel: Aluminum, black, alumite, Case: Surface-treated steel plateDimensions: 482 (W) × 44 (H) × 333 (D)mmWeight: 3.8kgAccessory: CD (PC setting software) × 1, EV-CF128M (CF card) × 1, Removable terminal plug (4 pins) × 1, Removable terminal plug (12 pins) × 4, Rack mounting screw × 4, Driver × 1

SX-2000SMSystem Manager

SX-2100AIAudio Input Unit

Power Source: Usable power supply unit: VX-200PS/24V DC (operational range: 20V – 40V DC)/Two power inputs construction enables dual- redundant power supply.Current Consumption: 2.01A or less (maximum value in the power operating range)/1.50A or less (when operated on 24V DC)Note: But except current consumption of the external equipment of which power is supplied from the unit.Indication: 18 alphanumeric characters, Level indication (8 inputs, monitor), Status indicators, Power indicator, Standby indicator, CPU OFF indicatorOperation: Function button, Input level control, Monitor speaker volume control, ON/OFF switch, Operation buttonAudio Input: 8 inputs, module construction (max. 4 modules, modules optional) monitoring possible using built-in speaker.Audio Input Characteristic: Sampling frequency: 48kHzNo. of Connectable Remote Microphone: Max. 8Power Feed to Remote Microphone: Possible for up to a total of 8A.SX Link: Network I/F: 2 100BASE-TX circuits, RJ45 connector, decentralized installation possibleConnection Cable/Device: Shielded Category 5 twisted pair cable for LAN (CAT5-STP)To be connected via the switching hub specified by TOA.Note: This network must be made completely independent from other LAN.Maximum Cable Distance: 100m (between this unit and a switching hub)Analog Link: Input/Output Connector: Input: 1 input, RJ45 connector/Output: 1 output, RJ45 connectorConnection Cable: Shielded Category 5 twisted pair cable for LAN (CAT5-STP) (1 pair of audio wire + 1 pair of CPU OFF + 1 pair of control wire (system reset/standby) + 1 pair of connection check wire)Maximum Cable Distance: Total length of analog audio link: 800m

Control Input: 16 inputs, no-voltage make contact input, open voltage: 40V DC or less, short-circuit current: 2mA, photo coupler input, removable terminal block (16 pins) Control Output: 16 outputs, A contact: normally open (changeable to B contact: normally closed), no-voltage make contact output, relay contact output (withstand voltage: 40V DC, control current: 2 – 300mA), removable terminal block (16 pins)Operating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel: Aluminum, black, alumite, Case: Surface-treated steel plateDimensions: 482 (W) × 88.4 (H) × 349 (D)mmWeight: 7.2kgAccessory: Removable terminal plug (4 pins) × 1, Removable terminal plug (16 pins) × 2, Rack mounting screw × 4Option: Remote microphone interface module: SX-200RMMIC/LINE input module: D-921E, D-921F, D-922E, D-922FStereo input module: D-936RNote: Modules other than described above cannot be used.

Voice Evacuation SystemsVoic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

54

SX-2100AOAudio Output Unit

Analog Link: Input/Output Connector: Input: 1 input, RJ45 connector/Output: 1 output, RJ45 connectorConnection Cable: Shielded Category 5 twisted pair cable for LAN (CAT5-STP) (1 pair of audio wire + 1 pair of CPU OFF + 1 pair of control wire (system reset/standby) + 1 pair of connection check wire)Maximum Cable Distance: Total length of analog link: 800mDS Link:Usable Unit: VX-2000DSConnector/Cable: 2 interface, RJ45 Connector, Shielded Category 5 twisted pair cable (CAT5-STP)Maximum Cable Distance: 5mCI/CO Link:Usable Unit: VX-2000CI or SX-2000COConnector/Cable: 1 interface, RJ45 Connector, Shielded Category 5 twisted pair cable (CAT5-STP)Maximum Cable Distance: 800mSpeaker Line Failure Detection Section:Connector/Cable: Removable terminal block. SP/AMP: 8 pins, STANDBY AMP: 2 pins, AWG 24 – AWG 16Maximum Input: 100Vrms, 5ArmsFault Detection System: Short circuit, open circuit, ground faultMethod: Impedance or End of lineEnd of Line: In case of normal: Terminated by 470kΩ between the speaker line and the shield/In case of open: Opened between the speaker line and the shield/Impedance: Minimum load: 2kΩ (5W) at 100V lineControl Input: 8 inputs, no-voltage make contact input, open voltage: 40V DC, short-circuit current: 2mA, photo coupler input, removable terminal block (6 pins)Control Output: 8 outputs, C contact, no-voltage make contact output, relay contact output (withstand voltage: 40V DC, control current: 2 – 300mA), removable terminal block (6 pins)Operating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel: Aluminum, black, alumite, Case: Surface-treated steel plateDimensions: 482 (W) × 88.4 (H) × 349 (D)mmWeight: 7.1kgAccessory: Removable terminal plug (8 pins) × 4, Removable terminal plug (6 pins) × 8, Removable terminal plug (4 pins) × 1, Removable terminal plug (3 pins) × 1, Removable terminal plug (2 pins) × 1, Rack mounting screw × 4

Power Source: Usable power supply unit: VX-200PS/24V DC (operational range: 20V – 40V DC)/Two power inputs construction enables dual- redundant power supply.Current Consumption: 1.7A or less (maximum value in the power operating range)/1.2A or less (when operated on 24V DC)Note: But except current consumption of the external equipment of which power is supplied from the unit.Indication: 18 alphanumeric characters, Level indication (8 outputs, monitor), Status indicators, Power indicator, Standby indicator, CPU OFF indicatorOperation: Function button, Output level control, Monitor speaker volume control, ON/OFF switch, Operation buttonPA Link:Audio Output: 8 outputs and standby AMP, 0dB*, suitable load: 600 ohms or above, electronically-balanced, RJ45 Connector/monitoring possible using built-in speakerAudio Output Characteristic: Frequency response: 20Hz – 20kHz/Sampling frequency: 48kHz/D/A converter: 24 bitConnection Cable: Shielded Category 5 twisted pair cable (CAT5-STP)Maximum Cable Distance: 5mUsable Amplifier: VP-2064, VP-2122, VP-2241 or VP-2421 (VP-200VX is required for each amplifier)Local Audio Input:Audio Input: 2 inputs, 0dB*, 10kΩ, electronically-balanced, RJ45 ConnectorAudio Input Characteristic: Frequency response: 20Hz – 20kHz/Sampling frequency: 48kHz/A/D converter: 24 bitControl Input: 2 inputs, no-voltage make contact input, open voltage: 12V DC, short-circuit: 2mA, photo coupler inputConnection Cable: Shielded Category 5 twisted pair cable (CAT5-STP)SX Link: Network I/F: 2 100 BASE-TX circuits, RJ45 connector, decentralized installation possibleConnection Cable/Device: Shielded Category 5 twisted pair cable for LAN (CAT5-STP)To be connected via the switching hub specified by TOA.Note: This network must be made completely independent from other LAN. Maximum Cable Distance: 100m (between this unit and a switching hub)

SX-2000CIControl Input Unit

Power Source: Usable power supply unit: VX-200PS/24V DC (operational range: 20V – 40V DC)/Two power inputs construction enables dual- redundant power supply.Current Consumption: 0.7A or less (maximum value in the power operating range)/0.55A or less (when operated on 24V DC)Indication: Control input indicator (32), Power indicator, CPU OFF indicator, FAULT indicatorControl Input: 32 inputs, no-voltage make contact input, open voltage: 24V DC, short-circuit current: 2mA, photo coupler input, removable terminal block (16 pins)Surveillance Section for The Control Input Lines: Connection resistance to make the function inactive: 20kΩ ±5%/Connection resistance to make the function active: 10kΩ ±5%/Connector cable: Twisted pair cable (shielded type is recommended)/Maximum cable distance: 10mCI/CO Link: Input/Output Connector: Input: 1 input, Output: 1 output, RJ45 connectorConnection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) (1 pair of data wire + 1 pair of control wire)Maximum Cable Distance: 800m

24V DC Output: Output Voltage: 24V DC ±10% or less Maximum Feeding Current: 100mAConnector: Removable terminal block (2 pins)Operating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel: Aluminum, black, alumite, Case: Surface-treated steel plateDimensions: 482 (W) × 44 (H) × 331.5 (D)mmWeight: 3.6kgAccessory: Removable terminal plug (16 pins) × 4, Removable terminal plug (4 pins) × 1, Removable terminal plug (2 pins) × 1, Rack mounting screw × 4

SX-2000COControl Output Unit

Operating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel: Aluminum, black, alumite, Case: Surface-treated steel plateDimensions: 482 (W) × 44 (H) × 331.5 (D)mmWeight: 3.6kgAccessory: Removable terminal plug (6 pins) × 16, Removable terminal plug (4 pins) × 1, Rack mounting screw × 4

Power Source: Usable power supply unit: VX-200PS/24V DC (operational range: 20V – 40V DC)/Two power inputs construction enables dual- redundant power supply.Current Consumption: 0.34A or less (maximum value in the power operating range)/0.29A or less (when operated on 24V DC)Indication: Control output indicator (32), Power indicator, CPU OFF indicator, FAULT indicatorControl Output: 32 outputs, no-voltage make contact output, relay contact output (withstand voltage: 40V DC, control current: 2 – 300mA), removable terminal block (6 pins)CI/CO Link: Input/Output Connector: Input: 1 input, Output: 1 output, RJ45 connectorConnection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) (1 pair of data wire + 1 pair of control wire)Maximum Cable Distance: 800m

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

SX-2000 Series Modules

6

Power Source: 24V DC (operating range: 15 – 40V DC, supplied from the SX-2000AI or SX-2100AI audio input unit) Current Consumption: 240mA or lessAudio Output: 0dB*, transformer-balancedDistortion: 1% or lessFrequency Response: 200Hz – 15kHzS/N Ratio: 55dB or moreMicrophone: Unidirectional dynamic microphone with talk key, AGC (ON/OFF switchable), microphone element failure detectable by using a built-in small oscillatorVolume Control: Microphone volume control, Monitor speaker volume controlConnection Cable: Shielded CPEV cable (each 1 pair of audio wire, data wire, monitor/control wire and power supply wire) or Shielded Category 5 twisted pair cable (CAT5-STP)Maximum Cable Distance: 800mNumber of Connectable Expansion: Max. 5 units

Monitor Speaker: Built insideOperation: Emergency key, Function keys, CPU switch, Reset switchIndicator: Status indicators, Power indicator, Failure indicator, CPU indicator, Selection indicators, Microphone indicator, Broadcast status indicatorOperating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)Dimensions: 200 (W) × 215 (H) × 95 (D)mm (with wall mounting bracket unit)Weight: 1.48kg (with wall mounting bracket unit)Accessory: EMC clamp x 1, Wall mounting bracket unit x 1, Wall mounting screw x 2, Box mounting screw x 2Option: Remote microphone extension: RM-210Applicable Box: YS-11A

RM-200SFFireman's Microphone

SX-2000 Series Microphones and Optional Accessories

Audio Input: 2 inputs, 0dB*, RJ45 ConnectorAudio Input Characteristic: Sampling Frequency: 48kHzA/D Converter: 24 bitPower Feed: Max. 1A per connectorLevel Control: Audio input (0 to +12dB)Finish: Panel: Pre-coated steel plate, black, 30% glossDimensions: 35 (W) x 119.5 (H) x 178.4 (D) mmWeight: 190g

* 0dB = 1V

Input: monaural x 2/-10dB*, 10k ohms, RCA pin jackA/D converter: 24 bitsFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input)Sampling Frequency: 48 kHzDynamic range: 100dB (IHF-A weighted) or moreTHD: 0.05% or less Finish: Panel: Pre-coated steel plate, black, 30% glossDimensions: 35 (W) x 119.5 (H) x 178.4 (D) mmWeight: 145g

* 0dB = 0.775V

SX-200RMRemote Microphone Interface Module

D-936RStereo Select Input Module

D-921EMic/Line Input Module (24 bits Monaural Type)

D-921FMic/Line Input Module (24 bits Monaural Type)

Input: 2 channels, Mic/Line changeable/Mic; -50/-36dB*, 4.7kΩ, electronically-balanced, equivalent to XLR-3-31 type/Line; -10/+4dB*, 10kΩ, electronically-balanced, equivalent to XLR-3-31 type/Phantom power supply (can be used when set for the microphone)15V: (option: D-901, DP-K1, D-2008SP)12V: (option: SX-2100AI)/Ground lift switchA/D Converter: 24 bitsSampling Frequency: 48kHz Frequency Response: 20Hz – 20kHz, ±1 dB (+4dB* input) Dynamic Range: 100 dB (IHF-A weighted) or more (+4dB* input)THD: 0.05% or less (+4dB* input) Finish: Panel; Pre-coated steel plate, black , 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 150g

* 0dB = 0.775V

Input: 2 channels, Mic/Line changeable/Mic; -50/-36dB*, 4.7kΩ, electronically-balanced, removable terminal block (3 pins)/Line; -10/+4dB*, 10kΩ, electronically-balanced, removable terminal block (3 pins)/Phantom power supply (can be used when set for the microphone)15V: (option: D-901, DP-K1, D-2008SP)12V: (option: SX-2100AI)/Ground lift switchA/D Converter: 24 bitSampling Frequency: 48kHzFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input)Dynamic Range: 100dB (IHF-A weighted) or more (+4dB* input)THD: 0.05% or less (+4dB* input)Finish: Panel; Pre-coated steel plate, black , 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 140gAccessory: Removable terminal block type connector (preinstalled on the unit) × 2

* 0dB = 0.775V

Input: 2 channels, -50/-36/-10/+4dB* (Selectable with the DIP switch), 4.7kΩ, electronically-balanced, equivalent to XLR-3-31 type/Phantom power supply (can be set with DIP switch)15V: (option: D-901, DP-K1, D-2008SP)12V: (option: SX-2100AI)/Ground lift switch (can be set with the DIP switch)A/D Converter: 20 bitsSampling Frequency: 48 kHzFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input) Dynamic Range: 85dB (IHF-A weighted) or more (+4dB* input) THD: 0.2% or less (+4dB* input)Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 135g

* 0dB = 0.775V



Input: 2 channels, -50/-36/-10/+4dB* (Selectable with the DIP switch), 4.7kΩ, electronically-balanced, removable terminal block (3 pins)/Phantom power supply (can be set with the DIP switch)15V: (option: D-901, DP-K1, D-2008SP)12V: (option: SX-2100AI)/Ground lift switch (can be set with the DIP switch)A/D Converter: 20 bitsSampling Frequency: 48 kHzFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input)Dynamic Range: 85dB (IHF-A weighted) or more (+4dB* input)THD: 0.2% or less (+4dB* input)Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 125gAccessory: Removable terminal block type connector (preinstalled on the unit) × 2

* 0dB = 0.775V

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

76

Power Source: 24V DC (operating range: 15 – 40V DC, supplied from the SX-2000AI or SX-2100AI audio input unit) or DC input power supple connector (when the optional AD-246 power supply unit used)/Usable DC power supply plug: 5.5mm outer diameter, 2.1mm inner diameter 9.5mm long, and non-polarity typeCurrent Consumption: 240mA or lessAudio Output: 0dB*, 600Ω, balancedExternal Microphone Input: -40dB*, 2.2kΩ, unbalanced, mini jack, for electret condenser microphone (phantom power supply. 3V DC)Distortion: 1% or lessFrequency Response: 100Hz – 20kHzS/N Ratio: 60dB or moreMicrophone: Unidirectional electret condenser microphone with AGC (ON/OFF selectable)Chime: Built inside (PCM sound source), monitoring possible using built-in speaker Level Control: Microphone sensitivity control, monitor speaker volume control, chime (adjustable using the software)

Connection Cable: Main line: Shielded CPEV cable( 1 pair of audio wire + 1 pair of data wire + 1 pair of monitor/control wire + 1 pair of supply wire) or Shielded Category 5 twisted pair cable (CAT5-STP)/Branch line: Shielded Category 5 twisted pair cable (CAT5-STP), RJ45 connectorMaximum Cable Distance: 800mNumber of Connectable Expansion: Max. 4 unitsMonitor Speaker: Built insideOperation: Function switch, Covered switch, Broadcast switchIndicator: Power indicator, Failure indicator, Function switch indicator, Covered switch indicator, Broadcast switch indicatorOperating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: ABS resin, blueish grayDimensions: 190 (W) × 76.5 (H) × 215 (D)mm (excluding microphone)Weight: 880g

*0dB = 1V

RM-200SARemote Microphone

RM-210Remote Microphone Extension

Current Consumption: 20mA max. (in terms of RM-200M's DC power input)/75mA max. (in terms of DC power inputs of RM-200X and RM-200XF)/80mA max. (in terms of DC power input of RM-200SA and RM-200SF) Connection: Connection by way of dedicated cable Number of Function Keys: 10Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)

Dimensions: 110 (W) × 76.5 (H) × 215 (D)mmWeight: 350gAccessory: Extension cable × 1, Linkage bracket A × 2, Linkage bracket B × 1, Screw for linkage bracket × 12Applicable Unit (option): RM-200SA, RM-200SF, RM-200M, RM-200X, RM-200XF

RM-200RJTerminal Unit

Applied Voltage: 40V or less Withstand Voltage: 1A Voltage Indicator: Monitor terminals: Terminal No. 7 (+) and terminal No. 8 (-), extinguish voltage: under 14A, lighting voltage: 21V or more, indicator ON/OFF switchable Connector: RJ45 connector: 1Terminal: M3 screw terminal (10 pins), distance between barriers+ 6.68mmOperating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)

Finish: Surface-treated steel plate, black, paintDimensions: 84 (W) × 116 (H) × 25.7 (D)mmWeight: 250g

SX-2000 Series System Image

CF card(Setting/Log data)

VX-2000DS

BGM 1

Digital announcer

BGM 2

SW-HUB

Battery

Power (24 V DC)

SX link (A, B 2 lines)

RM link

Audio

Analog link

Contact control

Power amplifiers

SX-2100AO

Control input 2

Control input 1

SX-2100AI

RM-200SA

RM-200SF

Zone 2

Zone 3

Zone 4

Zone 5

Zone 6

Zone 7

Zone 8

Zone 1

SX-200RM

SX-200RM

D-922E

D-936R

VX-2000PF

VX-200PS

VX-200PS

VX-200PS

SX-2000SM

Power amplifiers

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

8

VX-2000 SeriesVX-2000System Manager

Power Source: 24V DC (operating range: 20 – 40V DC)/M3.5 screw terminal, distance between barriers: 8.8mmCurrent consumption: Under 650mA (20V DC)Input: -20dB*, unbalanced, Number of module slots: 8/Usable module; VX-200XR, VX-200XI, 900 series plug-in modules (M-01F, M-01M, M-01P, M-01S, M-01T, M-03P, M-51F, M-51S, M-51T, M-61F, M-61S, M-61T, U-01F, U-01P, U-01R, U-01S, U-0IT, U-03R, U-03S, U-61S, U-61T)Audio Link Output: Number of audio buses: 4/0dB*, electronically balanced, RJ45 female connector/Twisted-pair straight cable (TIA/EIA-568A standard)Monitor Output: 0dB*, electronically balanced, XLR receptacle (3 pins) Frequency Response: 20Hz – 20kHzS/N Ratio: Over 60dBDistortion: Under 0.5%Cross Talk: Under -60dB (1kHz, 0dB*)Control Input: 16 inputs, no-voltage make contact, open voltage; 17V DC, Short circuit current; Under 5mA, RJ45 connector × 2Control Output: 16 outputs, open collector output, withstand voltage; 30V DC, Control current; Under 5mA, RJ45 connector × 2

Chime Tone: Built-in chime; 4-tone chime (up)/4-tone chime (down)/2-tone chime/GongCommunication System: PC (Setting software to be installed): D-sub connector (9 pins), cross cable, RS-232C/VX-2000SF; RJ45 female connector, Twisted-pair straight cable (TIA/EIA-568A standard), LONWORKS RS-485Operating Temperature: 0 C to +40 CFinish: Panel; Surface-treated steel plate, black, 30% gloss, paintDimensions: 482 (W) × 132.6 (H) × 337 (D)mmWeight: 6.4kgAccessory: Rack mounting bracket (preinstalled on the unit) × 2, Rack mounting screw × 4, Fiber washer × 4, Blank panel × 7, Blank panel mounting screw × 14, Setting software installation CD × 1, Fuse (T1.6A L) × 1, Fuse (T6.3A L) × 1Option: Voice announcement board; EV-200M, Isolation transformer; IT-450 (audio link output)

* 0 dB = 1 VNote: LONWORKS is a trademark of Echelon Corporation.

VX-2000SFSurveillance Frame

Power Source: 24V DC (operating range; 20 – 40V DC)/M3.5 screw terminal, distance between barriers; 8.8mmCurrent Consumption: Under 2A (40V DC)Number of Module Slot: 10, usable modules; VX-200SZ, VX-200SP, VX-200SI, VX-200SOFrequency Response: 20Hz – 20kHzS/N Ratio: Over 60dBDistortion: Under 0.5%Cross Talk: Under -60dB (1kHz, 0dB*)Audio Link Input/Output: Number of audio busses; 4/0dB*, electronically balanced, RJ45 female connector/Twisted-pair straight cable (TIA/EIA-586A standard)Standby Amplifier Link: RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier/Twisted-pair straight cable (TIA/EIA-586A standard)Communication System: VX-2000, VX-2000SF; RJ45 female

connector × 2, LONWORKS RS-485/VX-2000DS; RJ45 female connector × 2, Twisted-pair straight cable (TIA/EIA-586A standard)Operating Temperature: 0°C to +40°CFinish: Panel: Surface-treated steel plate, black, 30% gloss, paintDimensions: 482 (W) × 132.6 (H) × 337 (D)mmWeight: 5.6kgAccessory: Rack mounting bracket (preinstalled on the unit) × 2, Rack mounting screw × 4, Fiber washer × 4, Blank panel × 9, Blank panel mounting screw × 18, Standby amp. cable (3m) × 1 Option: Isolation transformer; IT-450 (audio link output)


RM-200XFFireman’s Microphone

Power Source: 24V DC (operating range; 16 – 40V DC)Current Consumption: 200mA or less (RM-200XF), 850mA (with 10 RM-210s connected)Audio Output: 0dB*, 600Ω, balancedHand-Held Microphone: Dynamic microphone, Function switch (default; Press-to-talk), Microphone element fault detectionDistortion: 1% or lessFrequency Response: 200Hz – 15kHzS/N Ratio: 55dB or moreInternal Monitor Speaker: 200mWVolume Control: Microphone volume control, Monitor speaker volume controlNumber of Function Keys: 5 (including Hand-held microphone's switch), extendable up to 105 (with 10 RM-210s connected)Key Extension: 10 keys extension per RM-210, EXTENSION connectorNumber of Connectable Units: 4

RM-200XRemote Microphone

Power Source: 24V DC (operating range; 16 – 40V DC), supplied from RJ45 connector or power input jack (non-polarity type)/Usable power input plug; 5.5mm outer diameter, 2.1mm inner diameter, and 9.5mm longCurrent Consumption: Under 200mA (RM-200X), 750mA (with 9 RM-210s connected)Audio Output: 0dB*, 600Ω, balanced, RJ45 connectorGooseneck Microphone: Unidirectional electret condenser microphoneExternal Microphone Input: -40dB*, 2.2k ohms, unbalanced, mini jack, phantom poweringDistortion: Under 1%Frequency Response: 100 – 20kHzS/N Ratio: Over 60dBInternal Monitor Speaker: 200mWVolume Control: Microphone volume control, Monitor speaker volume control


Communication System: LONWORKS twisted pair free topology transceiverConnection Cable and Connector: Category 5 STP cable, plug-in screw connectorCommunication Distance: 500m (Free topology wiring)Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)Dimensions: 200 (W) × 215 (H) × 82.5 (D) mm (excluding the coiled cord)Weight: 1.2kgAccessory: Plug-in screw terminal × 1, Wall mounting bracket × 1, Wall mounting screw × 2, Box mounting screw × 2Applicable Box: YS-11A


Number of Function Keys: 15, extendable up to 105 (with 9 RM-210s connected)Key Extension: 10 keys extension per RM-210, EXTENSION connectorNumber of Connectable Units: 8 (include RM-200XF)Communication System: LONWORKS twisted pair free topology transceiverConnection Cable and Connector: Category 5 STP cable, RJ45 connectorCommunication Distance: 500m (Free topology wiring)Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)Dimensions: 190 (W) × 76.5 (H) × 215 (D)mm (gooseneck microphone excluded)Weight: 850g


VX-2000 Series Microphones

Current Consumption: 20mA max. (in terms of RM-200M's DC power input)/75mA max. (in terms of DC power inputs of RM-200X and RM-200XF)/80mA max. (in terms of DC power input of RM-200SA and RM-200SF) Connection: Connection by way of dedicated cable Number of Function Keys: 10Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)

Dimensions: 110 (W) × 76.5 (H) × 215 (D)mmWeight: 350gAccessory: Extension cable × 1, Linkage bracket A × 2, Linkage bracket B × 1, Screw for linkage bracket × 12Applicable Unit (option): RM-200SA, RM-200SF, RM-200M, RM-200X, RM-200XF

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

98

VX-200PS(H version)Power Supply Unit

Power Source: 230V AC, 50/60HzPower Consumption: 580WDC Power Output: Rated output; 210W (29V, 7.25A) × 2/Peak output; 400W × 2/M4 screw terminal, distance between barriers; 11mm Operating Temperature: 0° to +40°CApplicable Frame: VX-2000PFFinish: Surface-treated steel plateDimensions: 135 (W) × 118.2 (H) × 324.8 (D)mmWeight: 13.2kgAccessory: Fuse (T3.15A L) × 1, Power cord (2m) × 1

WB-RM200Wall Mounting Bracket

Finish: Surface-treated steel plate, black paintWeight: 100gSet Composition: Mount bracket × 1Accessory: Rack mounting screw × 1 set Usable Unit: RM-200X, RM-200M, RM-200SA, RM-210

VX-2000 Series Modules and Other Equipment

VX-200XIAudio Input Module with Control Input

Power Source: Supplied from VX-2000Current Consumption: Under 30mAInput Sensitivity (Rated Output –20dB): MIC; -70 to -42.5dB* (adjustable)/LINE; -20 to +7.5dB* (adjustable)/MIC or LINE selectable by the built-in switchLow Cut Filter (100Hz): 9 to 15dB attenuation (adjustable)High Cut Filter (10kHz): 8 to 14dB attenuation (adjustable)Distortion: Under 0.5%Frequency Response: 50Hz – 20kHz Phantom Power: 15V (open), 6V (current consumption; 3.3mA)Control Input: No-voltage make contact, open voltage; 17V DC, short-circuit current; Under 5mAInput Connector: RJ45 female connector/Twisted-pair straight cable (TIA/EIA-568A standard)Finish: Panel; Aluminum, hairlineDimensions: 35 (W) × 78 (H) × 88 (D)mmWeight: 70gAccessory: Mounting screw × 2Option: Isolation transformer; IT-450Applicable Model: VX-2000

* 0 dB = 1 V

VX-200XRRemote Microphone Input Module

Power Source: Supplied from VX-2000Current Consumption: Under 17mAConnectable Remote Microphone: RM-200X and RM-200XFInput Connector: RJ45 female connector/Twisted-pair straight cable (TIA/EIA-568A standard)Finish: Panel; Aluminum, hairlineDimensions: 35 (W) × 78 (H) × 88 (D)mmWeight: 70gAccessory: Mounting screw × 2Applicable Model: VX-2000

VX-200SZImpedance Detection Module

Power Source: Supplied from VX-2000SFCurrent Consumption: Under 150mAPower Amplifier Link: RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier/Twisted-pair straight cable (TIA/EIA-568A standard)External Attenuator Control Output: Plug-in screw connector, relay, no-voltage make contact output, transfer type, withstand voltage; 30V DC, 250V AC, contact current; Under 7A (DC), under 7A (AC)/Applicable cable diameter; AWG24 – AWG 16Speaker Output: Plug-in screw connector/Applicable cable diameter; AWG24 – AWG 16Power Amplifier Input: Plug-in screw connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier/Applicable cable diameter; AWG24 – AWG 16Fault Detection System: Short circuit, open circuit (impedance detection method), ground faultFinish: Panel; Surface-treated steel plateDimensions: 30.5 (W) × 132.6 (H) × 290.3 (D)mmWeight: 320gAccessory: Plug-in screw terminal × 1Option: Equalizer card; VX-200SEApplicable Model: VX-2000SF

VX-200SPPilot Tone Detection Module

Power Source: Supplied from VX-2000SFCurrent Consumption: Under 100mAPower Amplifier Link: RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier/Twisted-pair straight cable (TIA/EIA-568A standard)Line Monitor: Plug-in screw connector/Applicable cable diameter; AWG24 – AWG 16External Attenuator Control Output: Plug-in screw connector, relay, no-voltage make contact output, transfer type, withstand voltage; 30V DC, 250V AC, contact current; Under 7A (DC), under 7A (AC)/Applicable cable diameter; AWG24 – AWG 16Speaker Output: Plug-in screw connector/Applicable cable diameter: AWG24 – AWG 16Power Amplifier Input: Plug-in screw connector for connecting the VP-2064, VP-2122,VP-2241, VP-2421 Power Amplifier/Applicable cable diameter; AWG24 – AWG 16Fault Detection System: Short circuit, open circuit (pilot tone detection method), ground fault Finish: Panel; Surface-treated steel plateDimensions: 30.5 (W) × 132.6 (H) × 290.3 (D)mmWeight: 240gAccessory: Plug-in screw terminal × 1Option: Equalizer card; VX-200SEApplicable Model: VX-2000SF

Power Source: Supplied from VX-2000SFCurrent Consumption: Under 100mAPower Amplifier Link: RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier/Twisted-pair straight cable (TIA/EIA-568A standard)Line Monitor: Plug-in screw connector/Applicable cable diameter; AWG24 – AWG16External Attenuator Control Output: Plug-in screw connector, relay, no-voltage make contact output, transfer type, withstand voltage; 30V DC, 250V AC, contact current; Under 7A (DC), under 7A (AC)/Applicable cable diameter; AWG24 – AWG16Speaker Output: Plug-in screw connector/Applicable cable diameter: AWG24 – AWG16Power Amplifier Input: Plug-in screw connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier/Applicable cable diameter; AWG24 – AWG16Fault Detection System: Short circuit, open circuit (pilot tone detection method), ground faultFinish: Panel; Surface-treated steel plateDimensions: 30.5 (W) × 132.6 (H) × 290.3 (D)mmWeight: 235gAccessory: Plug-in screw terminal × 1, End of line unit × 1Option: Equaliser card; VX-200SE Applicable Model: VX-2000SFEnd of line unit (accessory)Power Source: Supplied from the VX-200SP-2 (Generated by 40Hz sine wave)Speaker Line Input: Screw connector, Applicable cable diameter: AWG24 – AWG16In Case of Normal: Terminated by 470k ohms between the speaker line and the shieldIn Case of Open: Opened between the speaker line and shieldWeight: 22g

VX-200SP-2Pilot Tone Detection Module

VX-2000PFPower Supply Frame

Finish: Panel; Surface-treated steel plate, black, 30% gloss, paintDimensions: 483 (W) × 132.6 (H) × 324.8 (D)mmWeight: 5.5kgProduct Composition: Side panel × 2, Chassis × 1, Front panel × 1, Fixing bracket × 1Accessory: Rack mounting screw × 4, Fiber washer × 4Usable Unit: VX-200PS (up to 3)

VP-200VXPower Amplifier Input Module

Power Source: Supplied from VP-2064, VP-2122, VP-2241 or VP-2421Current Consumption: 30 mA or lessPower Amplifier Link: RJ45 female connector for connecting the VX-200SP, VX-200SZ Audio Output module or VX-2100AO/Twisted-pair straight cable (TIA/EIA-568A standard)Finish: Panel; Surface-treated steel plateDimensions: 88 (W) × 25.8 (H) × 53.2 (D)mmWeight: 50gApplicable Model: VP-2064, VP-2122, VP-2241, VP-2421

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

10

General Input Modules

VX-2000DS(301H version)Emergency Power Supply

Power Source: 230V AC, 50/60Hz Power Consumption: 240W maxApplicable Battery: YUASA NP series (12V × 2 or 4), Panasonic LC-X1265PG/APG (65 Ah)Charging Method: Trickle chargingCharging Current: 5A maxCharging Output Voltage: 27.3V ±0.3V (at 25°C)/Temperature correction coefficient; -40mV/°CPower Supply Input: 6 M4 screw terminal, distance between barriers; 11mm DC Power Output: 6 (25A max. each) M4 screw terminal, distance between barriers; 11mmControl Connector: RJ45 female connector for connecting

VP-2064 (60W × 4)VP-2122 (120W × 2)VP-2241 (240W)VP-2421 (420W)Power Amplifier

Power Source: 28V DC (operating range; 20 – 40V DC)/M4 screw terminal, distance between barriers; 12mmCurrent Consumption (EN60065): VP-2064, VP-2122: 4.8A in total/VP-2241: 4.8A/VP-2421: 7.6ARated Output Power: VP-2064: 60W × 4/VP-2122: 120W × 2/VP-2241: 240W/VP-2421: 420W(at min. resistive and max. capacitive load)Output Power (at AC Mains: 195.5V): VP-2064: 60W × 4/VP-2122: 120W × 2/VP-2241: 180W/VP-2421: 320W(at min. resistive and max. capacitive load)Output Voltage: 100V (70V, 50V: selectable by the internal wiring change)Maximum Resistive Load: VP-2064: 167Ω (at 100V), 83Ω (70V), 41Ω (at 50V)/VP-2122: 83Ω (at 100V), 41Ω (70V), 21Ω (at 50V)/VP-2241: 41Ω (at 100V), 21Ω (70V), 10Ω (at 50V)/VP-2421: 24Ω (at 100V), 12Ω (70V), 6Ω (at 50V)Maximum Capacitive Load: VP-2064: 0.125µF (at 100V), 0.25µF (at 70V), 0.5µF (at 50V)/VP-2122: 0.25µF (at 100V), 0.5µF (at 70V), 1µF (at 50V)/VP-2241, VP-2421: 0.5µF (at 100V), 1µF (at 70V), 1µF (at 50V)Number of Channels: VP-2064: 4/VP-2122: 2/VP-2241, VP-2421: 1

Input: Specified by input module VP-200VXNumber of Module Slots: VP-2064: 4, usable module; VP-200VX/VP-2122: 2, usable module; VP-200VX/VP-2241, VP-2421: 1, usable module; VP-200VXOutput: Power amplifier output (speaker line); M3.5 screw terminal, distance between barriers; 8.8mmFrequency Response: 40Hz – 16kHz, ±3dB (at 1/3 rated output)Distortion: 1% or less (at rated output, 1kHz)S/N Ratio: 80dB or morePanel Indicator: VP-2064: Channel power indicator; 4 channels, dual colour LED/Overheat indicator; Yellow LED/VP-2122: Channel power indicator; 2 channels, dual colour LED/Overheat indicator; Yellow LED/VP-2241, VP-2421: Channel power indicator; 1 channels, dual colour LED/Overheat indicator; Yellow LEDOperating temperature: 0°C to +40°CFinish: Panel; Surface-treated steel plate, black, 30% gloss, paintDimensions: 482 (W) × 88.4 (H) × 340.5 (D)mmWeight: VP-2064: 11.2kg/VP-2122: 9.1kg/VP-2241: 8.1kg/VP-2421: 9.5kgAccessory: Rack mounting screw × 4, Fiber washer × 4

the VX-2000SF Surveillance Frame/Twisted-pair straight cable (TIA/EIA-568A standard)/Type of control signal: Battery check, AC power status, DC power status, charging circuit failure, and battery failureBattery Connection: 1 pair of positive and negative terminals/Applicable cable diameter; AWG 6 – AWG 1/0Operating Temperature: 0° to +40°CFinish: Panel; Surface-treated steel plate, black, 30% gloss, paint Dimensions: 482 (W) × 88.4 (H) × 377.6 (D)mmWeight: 10.5kgAccessory: Rack mounting screw × 4, Fiber washer × 4, Blade fuse (40A) × 3, Fuse (T3.15A L) × 1, Power cord (2m) × 1, Insulating sheet × 1, Attention label × 1

Power Source: Supplied from VX-2000SFCurrent Consumption: Under 170mAPower Amplifier Link: RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier/Twisted-pair straight cable (TIA/EIA-568A standard)External Attenuator Control Output: Plug-in screw connector, relay, no-voltage make contact output, transfer type, with stand voltage; 30V DC, 250V AC, contact current; Under 7A (DC), under 7A (AC)/Applicable cable diameter; AWG24 – AWG16Speaker Output: 2 outputs (A, B), plug-in screw connector/Applicable cable diameter; AWG24 – AWG16Power Amplifier Input: Plug-in screw connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier/Applicable cable diameter; AWG24 – AWG16Fault Detection System: Short circuit, open circuit (impedance detection method), ground faultFinish: Panel; Surface-treated steel plateDimensions: 30.5 (W) × 132.6 (H) × 290.3 (D)mm Weight: 335gAccessory: Plug-in screw terminal × 1Option: Equaliser card; VX-200SEApplicable Model: VX-2000SF

VX-200SEEqualiser Card

Power Source: Supplied from the mounted boardCurrent Consumption: Under 50mAEqualiser Centre Frequency: 80Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 12kHzGain Range: ±12dB, adjustable in 2dB stepsDimensions: 110 (W) × 90 (H) × 21.4 (D)mmWeight: 50gApplicable Model: VX-200SZ, VX-200SZ-2, VX-200SP, VX-200SP-2

EV-200MVoice Announcement Board

Power Source: 24V DC, 0.2APower Consumption: 5WOutput: 0dB*1

Frequency Response: 20Hz – 20kHz (44.1kHz sampling)/20Hz – 14kHz (32kHz sampling)Distortion: Under 0.3% (44.1kHz, recording method: Extremely High)Playback Mode: Single source playbackNo. of Playback Program: 8 programsOperating Temperature: 0°C to +50°COperating Humidity: Under 90%RH (no condensation)Dimensions: 120 (W) × 18.6 (H) × 121 (D) mmWeight: 120gAccessory: Mounting screw × 2, CompactFlash card (128MB, preinstalled on the unit) × 1

*1 0 dB = 1 VNote: Use the CompactFlash card adapter on the market for recording by the EV-350R.

VX-200SZ-2Impedance Detection Module

VX-200SOControl Output Module

Power Source: Supplied from VX-2000SFCurrent Consumption: Under 150mAControl Output: 16 outputs, no-voltage make contact, contact capacity; 28V DC, 1A, RJ45 connectorFinish: Panel; Surface-treated steel plateDimensions: 30.5 (W) × 132.6 (H) × 290.3 (D)mmWeight: 250gApplicable Model: VX-2000SF

VX-200SIControl Input Module

Power Source: Supplied from VX-2000SFCurrent Consumption: Under 100mAControl Input: 16 inputs, no-voltage make contact, open voltage; 24V DC, short circuit current; under 10mA, RJ45 connectorFinish: Panel; Surface-treated steel plateDimensions: 30.5 (W) × 132.6 (H) × 290.3 (D)mmWeight: 200gApplicable Model: VX-2000SF

U-01R, U-03R, U-01F, for the line level input with different input connectors.M-01F, M-01T for the microphone levelinput.

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

11

VX-2000 Series System Image

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

VP-1061 (60W)VP-1121 (120W)VP-1241 (240W)VP-1361 (360W)(301H version)Power Amplifier

Power Source: 230V AC, 50/60Hz, 24V DCPower Consumption: VP-1061: AC: 170W (at rated output),100W (EN60065), 14W (no-signal)DC: 4.5A (at rated output), 0.1A (no-signal)VP-1121: AC: 320W (at rated output), 160W (EN60065), 19W(no-signal)DC: 8.2A (at rated output), 0.1A (no-signal)VP-1241: AC: 537W (at rated output), 240W (EN60065), 21W(no-signal)DC: 14.6A (at rated output), 0.4A (no-signal)VP-1361: AC: 768W (at rated output), 330W (EN60065), 37W(no-signal)DC: 20.9A (at rated output), 0.5A (no-signal)Rated Output Power: VP-1061: 60W/VP-1121: 120W/VP-1241: 240W/VP-1361: 360WInputs: 2 program inputs (parallel); 0dB*, 20k ohms (balanced)/2 priority inputs (parallel); 0dB*, 20kΩ (balanced)Impedance: VP-1061: 167Ω (100V)/ VP-1121: 83Ω (100V)/VP-1241: 42Ω (100V)/VP-1361: 28Ω (100V)S/N Ratio: 80dB or moreTHD: 1% or less (at rated output f = 1k Hz)Frequency Response: 80Hz – 16kHz, ±3dB (at 1/3 ratedoutput)Ventilation: Fan coolingOperating Tempetature: 0°C to +40°C 70V), 1µF (at 50V)

Operating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: VP-1061/VP-1121: 210 (W) × 88.4 (H) × 338.7(D)mm/VP-1241/VP-1361: 483.6 (W) × 132.6 (H) × 337.8 (D)mmWeight: VP-1061: 6.9kg/VP-1121: 9.3kg/VP-1241: 13.4kg/VP-1361: 16.6kgAccessory: VP-1061: Power cable (2m) × 1, Removableterminal plug (2 pins) × 2, Removable terminal plug (3 pins) × 2,Removable terminal (5 pins) × 2, Joint plate × 1, Joing platemounting screw × 3, Fuse (1.25A) × 1/VP-1121: Power cable(2m) × 1, Removable terminal plug (2 pins) × 2, Removableterminal plug (3 pins) × 2, Removable terminal (5 pins) × 2,Joint plate × 1, Joing plate mounting screw × 3, Fuse (2.5A) × 1/VP-1241: Power cable (2m) × 1, Removable terminal plug (2pins) × 2, Removable terminal plug (3 pins) × 2, Removableterminal (5 pins) × 2, Fuse (3.15A) × 1/VP-1361: Power cable(2m) × 1, Removable terminal plug (2 pins) × 2, Removableterminal plug (3 pins) × 2, Removable terminal (5 pins) × 2,Fuse (5.0A) × 1Option: Fault detector: YA-1000A, Half width panel:MB-25B-BK (for rack mounting one VP-1061 unit), Rack jointbracket: MB-25-J (for rack mounting two VP-1061 units)

* 0dB = 1VVP-1241/VP-1361

VP-1061/VP-1121

Guest room 1

Guest room 26F

Guest room 1

Guest room 25F

Guest room 1

Guest room 24F

Guest room 1

Guest room 23F

Guest room 1

Guest room 22F

Guest room 1

Guest room 23F

Guest room 1

Guest room 22F

Standby Amplifier

1F Hallway

GF, 1 – 5F Staff area

GF Bar

GF Lobby

1F Hallway

GF Lobby

GF Restaurant

1F Conference room

Standby Amplifier

Stairs / corridor

GF, 1 – 5F Staff area

Stairs / corridor

PM-660U

BGM Sources

RM-200X

RM-200XF + RM-210’s

RM-200X + RM-210’s

RM-200XF

VX-2000

VX-2000SF

EV-200M

VX-2000SF

VX-2000SF

Building A

Building B

Standby Amplifier

PA-3640VB(H2 version)Power Amplifier

Power Source: 220V AC, 50Hz or 24V DCPower Consumption: 1100VA (at rated output)Output Power: 360WInputs: 2 program inputs (parallel); 0dB*, 100kΩ, balanced/2 priority inputs (parallel); 0dB*, 100kΩ, balancedOutput and Load Impedance: 100V/27.8Ω, 50V/6.9ΩS/N Ratio: 80dB or moreDistortion: 2% or less (at rated output, f = 1kHz) Frequency Response: 40Hz – 16kHz, ±3dB (at 1/3 ratedoutput)Finish: Panel; Surface-treated steel plate, black, 30% gloss, paint

Dimensions: 483 (W) × 177 (H) × 332 (D)mmWeight: 27.8kgAccessory: Rack mounting screw (with washer) × 4, Fuse (5A) × 1, Fuse (30A) × 2

1312

VM-3000 Series Power Source: 230V AC, 50/60HzPower Consumption: VM-3240VA: 600W (at rated output), 260W (according to EN60065)/VM-3360VA: 850W (at rated output), 360W (according to EN60065)Rated Output: VM-3240VA: 240W,/VM-3360VA: 360W Frequency Response: 50Hz – 20kHz, ±3dB (at 1/3 rated output)Distortion: 0.7% or less (at rated output, 1kHz)Signal-to-Noise Ratio: 85dB or moreAudio Input/Output Characteristic: Sampling frequency: 48kHz/A/D D/A CONVERTER: 24bitInput: Inputs 1 – 3: -50dB* (MIC)/-10dB* (LINE) (changeable), 600Ω, electronically balanced, combined XLR connector (female)/phone jack Input 4: -50dB* (MIC)/-10dB* (LINE), 600Ω, electronically balanced plug in screw connectorBGM 1 – 2: -10dB*, 10 kΩ RCA pin jackExternal AMP input: 100V line, removable terminal block (14 pins)Output: VM-3240VA: Speaker output 1 – 2: max (240w) per outputSpeaker output 3 – 6: max (120w) per outputSpeaker output 1 – 6: Total within 240W, removable terminal block (14 pins)Allowable minimum load: 500Ω (20W) at 100V line for speaker line failure detectionDirect output: Direct output from internal or external amplifier, removable terminal block (16 pins)Recording output BGM/Paging: 0dB, 10kΩ, RCA pin jackVM-3360VA: Speaker output 1 – 2: max (360w) per outputSpeaker output 3 – 6: max (120w) per outputSpeaker output 1 – 6: Total within 360W, removable terminal block (14 pins)Allowable minimum load: 500Ω (20W) at 100V line for speaker line failure detectionDirect output: Direct output from internal or external amplifier, removable terminal block (16 pins)Recording output BGM/Paging: 0dB, 10kΩ, RCA pin jackRM Link: Input 1 – 2: Connecting the RM-300MF/RM-200M Remote Microphone, RJ45 female connectorMaximum distance: Total 800m between this unit and remote microphones Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)Network I/F: 10 BASE-T/100 BASE-TX (selectable by automatic negotiation), RJ45 female connectorMaximum distance: 100m between this unit and a switching hub Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

VM-3240VA (240W)VM-3360VA (360W)(CE version)Voice Alarm System Amplifier

VM Link: Connecting the VM-3240E or VM-3360E, RJ45 female connectorMaximum distance: 800 mLink cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)EXT PA Link: Connecting the VP-2241 or VP-2421, RJ45 female connectorMaximum distance: 5m Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)General Control: Input 1 – 8: No-Voltage make contact input, open voltage: 24V DC, short-circuit current: 2mA or less, RJ45 female connectorOutput 1 – 8: Isolated open collector output, withstand voltage: 30V DC, operating current: 50mA or less, removable terminal block (14 × 2 pins)Emergency Control: Input 1 – 5: No-Voltage make contact input, open voltage : 24V DC, short-circuit current: 2mA or less, RJ45 female connectorInput 6: Isolated voltage input: Inactive; -24V ±20%, Active; +24V ±20%, RJ45 female connectorStatus out: Relay contact output, withstand voltage: 40V DC, operating current: 2 – 300mA, RJ45 female connectorATT Control: Relay contact 1 – 6, 125V AC or 30V DC, total under 5A, removable terminal block (16 pins)Power In/Out: Power in: Connecting the VX-2000DS only (operating range: 20 - 40V DC)PS out: VM-3240VA: 28V DC/18A, VM-3360VA: 28V DC/24AM4 Screw terminal distance between barriers 11mmDC24V Output: 24V DC, Maximum feeding current 0.3ADS Link: Connecting the VX-2000DS, RJ45 female connector Maximum distance: 5 mLink cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)Operating Temperature: -5°C to 45°COperating Humidity: 5% to 95% RH (no condensation)Finish: Panel Aluminum, hairline, black,Case: Surface-treated steel plate. black, paintDimensions: 482 (W) × 132.6 (H) × 460 (D)mmWeight: VM-3240VA: 16.5kg/VM-3360VA: 19kgAccessory: Power cord (2m) × 1, Setting software-CD × 1, Link cable (3m) × 2, Plastic foot × 4, Plastic foot mounting screw × 4, Removable terminal plug (14 pins) × 3, Removable terminal plug (16 pins) × 1, Emergency microphone (hand-held type) × 1Option: Input transformer: IT-450

* 0 dB = 1 V

Power Source: 230V AC, 50/60Hz/ 24V DCPower Consumption: VM-3240E: 600W (at rated output), 260W (according to EN60065)/VM-3360E: 850W (at rated output), 360W (according to EN60065)Rated Output: VM-3240E: 240W,/VM-3360E: 360W Frequency Response: 50Hz – 20kHz, ±3dB (at 1/3 rated output)Distortion: 0.7% or less (at rated output, 1kHz)Signal-to-Noise Ratio: 85dB or moreInput: External AMP input: 100V line, removable terminal block (14 pins)Local input: -50dB* (MIC)/-10dB* (LINE) (changeable), 600Ω, electronically balanced, removable terminal block (14 pins)Output: VM-3240E: Speaker output 1 – 2: max (240w) per outputSpeaker output 3 – 6: max (120w) per outputSpeaker output 1 – 6: Total within 240W, removable terminal block (14 pins)Allowable minimum load: 500Ω (20W) at 100V line for speaker line failure detectionDirect output: Direct output from internal or external amplifier, removable terminal block (16 pins)VM-3360E: Speaker output 1 – 2: max (360w) per outputSpeaker output 3 – 6: max (120w) per outputSpeaker output 1 – 6: Total within 360W, removable terminal block (14 pins)Allowable minimum load: 500Ω (20W) at 100V line for speaker line failure detectionDirect output: Direct output from internal or external amplifier, removable terminal block (16 pins)VM Link: Input: Connecting the VM-3240VA or VM-3260VA, RJ45 female connectorOutput: Connecting the VM-3240E or VM-3360E, RJ45 female connectorMaximum distance: 800 mLink cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)EXT PA Link: Connecting the VP-2241, RJ45 female connectorMaximum distance: 5m Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)General Control: Input 1 – 8: No-Voltage make contact input, open voltage: 24V DC, short-circuit current: 2mA or less, RJ45 female connectorOutput 1 – 8: Isolated open collector output, withstand voltage: 30V DC, operating current: 50mA or less, removable terminal block (14 pins)Emergency Control: Input 1 – 5: No-Voltage make contact input, open voltage : 24V DC, short-circuit current: 2mA or less, RJ45 female connectorInput 6: Isolated voltage input: Inactive; -24V ±20%, Active; +24V ±20%, RJ45 female connectorStatus out: Relay contact output, withstand voltage: 40V DC, operating current: 2 – 300mA, RJ45 female connector

VM-3240E (240W)VM-3360E (360W)(CE version)VM Extension Amplifier

ATT Control: Relay contact 1 – 6, 125V AC or 30V DC, total under 5A, removable terminal block (16 pins)Power In/Out: Power in: Connecting the VX-2000DS only (operating range: 20 - 40V DC)PS out: VM-3240E: 28V DC/18A, VM-3360R: 28V DC/24AM4 Screw terminal distance between barriers 11mm24V DC Output: 24V DC, Maximum feeding current 0.3ADS Link: Connecting the VX-2000DS, RJ45 female connector Maximum distance: 5 mLink cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)Operating Temperature: -5°C to 45°COperating Humidity: 5% to 95% RH (no condensation)Finish: Panel Aluminum, hairline, black,Case: Surface-treated steel plate. black, paintDimensions: 482 (W) × 132.6 (H) × 407 (D)mmWeight: VM-3240E: 16.5kg/VM-3360E: 19kgAccessory: Power cord (2m) × 1, Link cable (3m) × 2, Plastic foot × 4, Plastic foot mounting screw × 4, Removable terminal plug (14 pins) × 3, Removable terminal plug (16 pins) × 1

* 0dB = 1 V

Impedance: 600Ω ±10%Frequency Response: 200Hz – 10kHz

IT-450Input Transformer

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

VM-300SVPilot Tone Detection Module

13

RM-200MRemote Microphone

Power Source: 24V DC (operating range; 16 – 40V DC), supplied from RJ45 connector or power input jack (non-polarity type)/Usable power input plug; 5.5mm outer diameter, 2.1mm inner diameter, and 9.5mm longCurrent Consumption: Under 200mA (RM-200X), 750mA (with 9 RM-210s connected)Audio Output: 0dB*, 600Ω, balanced, RJ45 connectorGooseneck Microphone: Unidirectional electret condenser microphoneExternal Microphone Input: -40dB*, 2.2k ohms, unbalanced, mini jack, phantom poweringDistortion: Under 1%Frequency Response: 100Hz – 20kHzS/N Ratio: Over 60dBInternal Monitor Speaker: 200mWVolume Control: Microphone volume control, Monitor speaker volume control



RM-300MFFireman’s Microphone

Power Source: 24V DC (operating range; 15 – 40V DC, supplied from the VM-3000 system)Current Consumption: 120mA (RM-300MF), 660mA (with 3 RM-320F connected)Frequency Response: 200Hz – 15kHzDistortion: 1% or lessS/N Ratio: 55dB or moreMicrophone: Unidirectional dynamic microphone with talk key, compressor (on/off switchable)Volume Control: Microphone volume control, Buzzer volume controlConnection Cable: Main line: shielded CPEV cable (each one pair of Audio line, Data line, Power supply line) or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminalMaximum Cable Distance: Total 800m

Number of Connectable RM-320F: Max 3 unitsOperation: Emergency key, Evacuate key, Alert key, Emergency reset key CPU switch, Reset switchIndicator: Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator, Evacuation announcement indicator, Alert announcement indicator, Emergency reset indicator, Microphone in-use indicator, External emergency microphone in-use indicatorOperating Temperature: -5°C to 45°COperating Humidity: 5% to 95% RH (no condensation)Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)Dimensions: 200 (W) × 215 (H) × 82.5 (D) mm Weight: 1.1kg (with wall mounting bracket unit)Accessory: Wall mounting bracket × 1, Wall mounting screw × 2, Electrical box mounting screw × 2

VM-3000 Series System Image

Current Consumption: 20mA max. (in terms of RM-200M's DC power input)/75mA max. (in terms of DC power inputs of RM-200X and RM-200XF)/80mA max. (in terms of DC power input of RM-200SA and RM-200SF) Connection: Connection by way of dedicated cable Number of Function Keys: 10Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent) Dimensions: 110 (W) × 76.5 (H) × 215 (D)mmWeight: 350gAccessory: Extension cable × 1, Linkage bracket A × 2, Linkage bracket B × 1, Screw for linkage bracket × 12Applicable Unit (option): RM-200SA, RM-200SF, RM-200M, RM-200X, RM-200XF


RM-320FFireman’s Microphone Extension

Current Consumption: 180mA max (in terms of RM-300MF)Connection: Connection to RM-300MF by dedicated cableNumber of Function Keys: 20Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)Dimensions: 175 (W) × 215 (H) × 70 (D) mmWeight: 700gAccessory: Wall mounting bracket × 1, Wall mounting screw × 2

VM-3000 Series Microphones and Optional Accessories

RM-300MFFireman,s Microphone Audio Source

VP-2421 External amplifier

VP-2421 External amplifier

VX-2000DSEmergency

Power Supply

VM-3360E

VM-3360E (360W)VM Extension Amplifier

VM-3360VA (360W)Voice Alarm System Amplifier

Zone 1

Zone 2

Zone 3

Zone 4

Zone 5

Zone 6

Zone 13-18

Zone 19-24

Zone 7-12

VM-3360

RM LINKVM LINKExt. PA LINKDS LINKDC Power

AC mains

AC mains

AC mains

AC mains


AC mains

AC Adapter

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

14

VM-2000 Series Power Source: VM-2120: 230V AC (ER version)/120V AC (L version), 50/60Hz DC: 24V DC/7.5A, M3.5 screw terminal, Barrier distance: 8mm, Applicable cable diameter: AWG22 – AWG14/VM-2240: 230V AC (ER version)/120V AC (304L version), 50/60Hz DC: 24V DC/15A, M3.5 screw terminal, Barrier distance: 8 mm, Applicable cable diameter: AWG22 – AWG14Power Consumption on AC Mains: VM-2120: With no signal present: 37W Under normal operating conditions according to EN60065: 1998 sec. 4.2: 107W With rated output signal: 201W/VM-2240: With no signal present: 54 WUnder normal operating conditions according to EN60065: 1998 sec. 4.2: 255W With rated output signal: 549WCurrent Consumption on 24V DC Power Input: VM-2120: With no signal present: 0.7A Under normal operating conditions according to EN60065: 1998 sec. 4.2: 2.1AWith rated output signal: 5.2A/ VM-2240: With no signal present: 1A Under normal operating conditions according to EN60065: 1998 sec. 4.2: 5AWith rated output signal: 14ARated Output: VM-2120: 120W,/VM-2240: 240W Output Voltage/Impedance: VM-2120: 100V/83Ω, 70 V/42Ω, 50 V/21Ω (selectable by the internal wiring change)/ VM-2240: 100 V/42Ω, 70 V/21Ω, 50 V/10 ohms (selectable by the internal wiring change) Frequency Response: 50Hz – 16kHzDistortion: Under 1%Signal-to-Noise Ratio: Over 60dBTone Control: Bass: 100Hz ±10dB, Treble: 10kHz ±10dB (Inputs 1 – 3 and BGM individually adjustable.)Remote Microphone/Expansion Amplifier Connection: 2 RJ45 female connectors for connecting the RM-200M Remote Microphone and the VM-2120 or VM-2240 unit used as an expansion amplifier. /Maximum distance: 800m in total, Link cable: Category 5 shielded Number of connectable RM-200M's: Up to 4 Twisted-Pair straight cable (TIA/EIA-568A standard)Input: Inputs 1 – 3: -60dB*1 (MIC)/-10dB*1 (LINE) (changeable), 600Ω, electronically balanced*2, combined XLR connector (female)/phone jack (Only Input 1 is additionally equipped with DIN connector*3.)/Telephone paging input: Push-in terminal block*4 Voice sound: -10dB*1, 10kΩ, electronically-balanced input with shield terminal*2

Control: No-voltage make contact input, open voltage: 3.3V DC, short-circuit current: under 1A/BGM 1 – 2: -20dB*1, 10 kΩ, RCA pin jack, monaural (internally mixed)/Power amplifier input: 0dB*1, 10kΩ, RCA pin jack/ External speaker line input: 100V line, for All-Zone Broadcast (This input is selected when the "Unit's broadcast cutoff" control is activated.)Output: Speaker output: Plug-in screw connector*5 5-zone selector with attenuator (all zones simultaneously selectable)/Direct speaker line output: Direct output from the power amplifier output transformer (attenuator bypassed), Plug-in screw connector*5/Line output: 0dB*1, 10 kΩ RCA pin jack/Recording output: 0dB*1, 10 kΩ, RCA pin jack/Preamplifier output: 0dB*1, 10 kΩ, RCA pin jackControl Input: For controlling Inputs 1 – 3, Push-in terminal block No-voltage make contact input, open voltage: 3.3V DC, short-circuit current: under 1mA

VM-2120 (120W)(ER/L version)VM-2240 (240W)(ER/304L version)System Management Amplifier

Control Input and Output: D-sub connector (25-pin, female) Input: No-voltage make contact input, open voltage: 3.3V DC, short-circuit current: under 1mA Output: Open collector output, withstand voltage: 30V DC, control current: under 10mA(1)External control input •Activationofmessages*6

•Activationofpower •ActivationandstopofEmergencyBroadcast •Unit'sbroadcastcutoff(whenactivatedbyanexternal emergency equipment)(2)Status output •IrregularityofcommunicationswiththeRemote Microphone and an expansion amplifier •ACpowercondition •DCpowercondition •IrregularityofthesoundsourceoftheVoice Announcement Board •Failure(FAULT)indicationon •PowerswitchonExternal Attenuator Control Output: Plug-in screw connector*5, relay, no-voltage make contact output, transfer type, withstand voltage: 30V DC, 125V AC, contact current: under 7A (DC), under 7A (AC)Surveillance Input and Output*7: D-sub connector (25-pin, female) Input: No-voltage make contact input, open voltage: 3.3V DC, short-circuit current: under 1mA Output: Open collector output, withstand voltage: 30V DC, control current: under 10mAPower Supply: 24V DC/0.1A, for supplying power to an optional Amplifier Control Unit RU-2001/2002, push-in terminal block*4 Chime Tone: Built-in chime: 2-tone chime/2-tone chime (fast repeat)/4-tone chime (Up)/Single-tone chime/4-tone chime (Up & Down)/Gong/off Voice Announcement Board sound source: Pre-recorded chime*6 Function: Two units stacking (VM-2120 or VM-2240) Emergency broadcast (sequential control) Broadcast priority control Surveillance (failure detection) function*7 Power supply to only one Remote Microphone (RM-200M) Line resistance: Under 40Ω (one way)Operating Temperature: 0°C to +40°CFinish: Panel: ABS resin, dark gray (PANTONE 447C or its equivalent), paint Case: Steel plate, dark gray (PANTONE 446C or its equivalent), paintDimensions: 419 (W) × 143.3 (H) × 355.7 (D)mmWeight: VM-2120: 12.5kg/VM-2240: 14.5kgAccessory: Power cable (2m) × 1, Miniature type time-lag fuse T2.5A × 1, Name label × 1, Volume cover × 4Option: Rack mounting bracket: MB-36, Input transformer: IT-450, Voice announcement board: EV-200M, Surveillance board: SV-200MA

*1 0 dB = 1 V*2 Can be transformer-balanced with the addition of an optional IT-450 input transformer.*3 For connection of the Paging Microphone PM-660D with a remote control switch.*4 Usable cable diameter: AWG26 – AWG20, 0.5 mm2.*5 Usable cable diameter: AWG24 – AWG12, 2.5 mm2.*6 An optional EV-200M Voice Announcement Board is required. The chime sound source must be pre-recorded into CF (CompactFlash) card to be inserted into the EV-200M Board.*7 An optional SV-200MA Surveillance Board is required.

RM-210Remote Microphone Extension Unit


Power Source: 24V DC (operating range; 16 – 40V DC), supplied from RJ45 connector or power input jack (non-polarity type)/Usable power input plug; 5.5mm outer diameter, 2.1mm inner diameter, and 9.5mm longCurrent Consumption: Under 200mA (RM-200X), 750mA (with 9 RM-210s connected)Audio Output: 0dB*, 600Ω, balanced, RJ45 connectorGooseneck Microphone: Unidirectional electret condenser microphoneExternal Microphone Input: -40dB*, 2.2k ohms, unbalanced, mini jack, phantom poweringDistortion: Under 1%Frequency Response: 100 – 20kHzS/N Ratio: Over 60dBInternal Monitor Speaker: 200mWVolume Control: Microphone volume control, Monitor speaker volume control



VM-2000 Series Microphones and Optional Accessories

Current Consumption: 20mA max. (in terms of RM-200M's DC power input)/75mA max. (in terms of DC power inputs of RM-200X and RM-200XF)/80mA max. (in terms of DC power input of RM-200SA and RM-200SF) Connection: Connection by way of dedicated cable Number of Function Keys: 10Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent) Dimensions: 110 (W) × 76.5 (H) × 215 (D)mm

Weight: 350gAccessory: Extension cable × 1, Linkage bracket A × 2, Linkage bracket B × 1, Screw for linkage bracket × 12Applicable Unit (option): RM-200SA, RM-200SF, RM-200M, RM-200X, RM-200XF

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

1514

Power Source: 24V DCCurrent Consumption: 120mAControl Input and Output:Input: No-voltage make contact input, open voltage: 3.3V DC, short circuit current: 1mA or less (1) Speaker line initial setting activation signal (2) Speaker line surveillance activation signalOutput: Open collector output, withstand voltage: 30V DC, control current: 10mA or less (1) Monitoring short or open of individual speaker line (zone 1 – 5) (2) Ground fault (insulation resistance: 50kΩ or less) (3) Power amplifier failuresInput/Output Input: No-voltage make contact input, open voltage: 24V DC, short circuit current: 60mA or less Output: Open collector output, withstand voltage: 24V DC (used with VM 24V DC output), control current: 20mA or less (1) Speaker Zone information/selection (2) Power amplifier fault linkConnector: D-sub connector (25-pin, female)Failure Detection: Power amplifier failure: 20kHz pilot tone detection/Speaker line failure: 40Hz impedance detectionSpeaker Line Surveillance: Speaker lines are automatically monitored at set time intervalsSet Time: (10 – 60min, at 10min intervals)Operating Temperature: 0°C to +50°COperating Humidity : 90% or less RH (must be free from dew condition)Dimensions : 90 (W) × 20.6 (H) × 157 (D)mm Weight : 140gAccessory: Flat cable × 2

SV-200MASurveillance Board


Power Source: 24V DC, 0.2APower Consumption: 5WOutput: 0dB*1

Frequency Response: 20Hz – 20kHz (44.1kHz sampling)/20Hz – 14kHz (32kHz sampling)Distortion: Under 0.3% (44.1kHz, recording method: Extremely High)Playback Mode: Single source playbackNo. of Playback Program: 8 programsOperating Temperature: 0°C to +50°COperating Humidity: Under 90%RH (no condensation)Dimensions: 120 (W) × 18.6 (H) × 121 (D) mmWeight: 120gAccessory: Mounting screw × 2, CompactFlash card (128MB, preinstalled on the unit) × 1

*1 0 dB = 1 VNote: Use the CompactFlash card adapter on the market for recording by the EV-350R.

Impedance: 600Ω ±10%Frequency Response: 200Hz – 10kHz

IT-450Input Transformer

EMERGENCY STOP ACTIVATIONEMERGENCY ALERT ACTIVATION

EMERGENCY EVACUATION ACTIVATION


RM-200M/RM-210Remote Microphone/Remote Microphone Extension Unit


VM-2000(MASTER-AMP)

VM-2000(SUB-AMP)

STANDBY-AMP

FAULT INDICATIONPANEL

Wireless Microphone

Program Timer

Wireless Tuner

BGM Source

Paging Microphone

TelephoneSystem (paging)

FIRE ALARM

SV-200MASurveillance Board

SPEAKERS

SPEAKERS

SPEAKERS

SPEAKERS

SPEAKERS

SV-200MASurveillance Board 5 Zones

Emergency Power Supply Unit(TOA DS-1000B)

Dynamic Microphone

VM-2000 Series System Image

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

FS-7000 Series

16

Power Source: 24 V DC, M3 screw terminal, distance between barriers: 6.4 mmCurrent Consumption: 200 mAInput: EV: 0dB*, 600Ω, unbalanced, removable terminal block (2 pins)Timer signal: 0dB*, 600Ω, unbalanced, removable terminal block (4 pins)/Paging: -60/-20 dB*, 600Ω, balanced, removable terminal block (5 pins)/RF (Remote microphone): 0 dB*, 600Ω, balanced, removable terminal block (3 pins)/Preinstalled microphone (accessory): -55 dB*, 600Ω, unbalanced, circular connector (4 pins)/AUX: -20 dB*, 600Ω, unbalanced, removable terminal block (2 pins)/BGM 1: -60/0 dB*, 600Ω, balanced, removable terminal block (3 pins)/BGM 2 – 4: -20 dB*, 10 kΩ, unbalanced, RCA jackOutput: Priority output: 0dB*, 600Ω, balanced, removable terminal block (3 pins) (Outputs signals other than BGM 1 – 4 input signals when output is set to 2-channel broadcast mode.)/BGM output: 0 dB*, 600Ω, balanced, removable terminal block (3 pins) (Outputs BGM 1 – 4 signals.)Frequency Response: 50 Hz– 15kHz, within ±3 dB (1kHz)Tone Control: -10 dB at 100 Hz and 10 kHzS/N Ratio: Over 60dBDistortion: 1% or lessPriority Function: Priority output: Preinstalled microphone > EV (emergency broadcast mode)Timer > Paging > Remote microphone > Preinstalled microphone, AUX > BGM 1 ≥ BGM 2 – 4 (genera-purpose broadcast mode)/

BGM output: BGM 1 ≥ BGM 2 – 4 (by muting function setting)Electronic Tone: Ascending 4-tone chimeExternal Control Input: Timer: No-voltage make contact input, open voltage: 26V DC, short-circuit current: Under 2mA, removable terminal block (4 pins)/Paging: No-voltage make contact input, open voltage: 26V DC,short-circuit current: Under 2 mA, removable terminal block (5 pins)/Automatic fire alarm system (10 zones): No-voltage make contact input, open voltage: 26V DC, short-circuit current: Under 5mA, removable terminal block (12 pins)Output Control: 10 individual zones + all-zone call or 10 group zones + all-zone call (when optional FS-7000GM is connected) (individual zones expandable to up to 200 zones using FS-7010CP)Operating Section: Zone selection key, All-zone call button (general-purpose/general urgency all-zone call selectable), Broadcast reset button and Chime buttonDisplay Section: Power indicator, All-zone call indicator, Zone indicators, Busy indicator (timer, paging, remote microphone and main system), Speaker line short-circuit indicatorOperating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: 482 (W) × 132.6 (H) × 376.9 (D) mmWeight: 5.2 kgAccessory: Microphone × 1, Removable terminal plug (2 pins) × 2, Removable terminal plug (3 pins) × 4, Removable terminal plug (4 pins) × 1, Removable terminal plug (5 pins) × 1, Removable terminal plug (12 pins) × 1

*0 dB = 1 V

Power Source: 24 V DC, M3 screw terminal, distance between barriers: 6.4 mmCurrent Consumption: 150 mAExternal Control Input: Automatic fire alarm system (10 zones): No-voltage make contact input, open voltage: 26 V DC, short-circuit current: Under 5 mA, removable terminal block (12 pins)Output Control: 10 individual zones or 10 group zones (when optional FS-7000GM is connected)Operating Section: Zone selection keysDisplay Section: Power indicator, Zone indicators

Power Source: 230 V AC, 50 Hz/24 V DC (19.5 – 27 V), M3 screw terminal, distance between barriers: 6.4 mmPower Consumption: 195 W (275 VA) at rated power output (AC operation)Input: 24 V DC, M3 screw terminal, distance between barriers: 6.4 mmOutput: AC operation: 24 V DC ±0.5 V, 5 A (total)/DC operation: Voltage lower DC input voltage approx. by 1V, M3 screw terminal, distance between barriers: 6.4mmExternal Control Input/Output: Emergency power connectionControl: Rated voltage: 30V DC, current capacity: 5A, M3 screw terminal, distance between barriers: 6.4 mm/Start: Rated voltage: 24V DC, current capacity: 5A, M3 screw terminal, distance between barriers: 6.4mm

Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: 482 (W) × 44 (H) × 337 (D) mmWeight: 3 kgAccessory: Connection cable (14 pins, 60 cm) × 1, Connection cable (10 pins, 2.5 m) × 1, Removable terminal plug (12 pins) × 1

Emergency power controlControl: Rated voltage: 24V DC, current capacity: 5A, M3 screw terminal, distance between barriers: 6.4mmStart: No-voltage make contact input, open voltage: 24V DC, short-circuit current: Under 2mA, M3 screw terminal, distance between barriers: 6.4mmOperating Section: Power switchDisplay Section: AC power indicator, DC power indicatorOperating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: 482 (W) × 88.4 (H) × 338.2 (D) mmWeight: 8.9 kgAccessory: Power cord (1.8 m) × 1, Fuse (6.3 A) × 1, Fuse (8 A) × 1

FS-7000CPControl Panel

FS-7010CPExpansion Control Panel

FS-7000PSDC Power Supply Panel

Power Source: 24V DC, M3 screw terminal, distance between barriers: 6.4mmCurrent Consumption: 200mAAttenuator DC Power Input: Rated voltage: 24V DC (24 – 35 V), current capacity: 5A. M3 screw terminal, distance between barriers: 6.4 mmAttenuator Control Output: 10 lines, rated voltage: 24V DC, current capacity: 075 A (per line)/ 5A (total of 10 lines), with output short-circuit protection function, M3 screw terminal, distance between barriers: 6.4 mm

Display Section: Power indicator, Attenuator line indicatorsOperating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: 482 (W) × 44 (H) × 336 (D) mmWeight: 3 kgAccessory: Connection cable (12 pins, 60 cm) × 1

FS-7000ATAttenuator Control Panel

FS-7000PS

FS-7000EV

FS-7000CP

FS-7010CPFS-7000GMFS-7000RF

FS-7000JPFS-7000AT

FS-7006PA

FS-7012PA

Rack-mounted Image

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

FS-7000 Series Microphones and Optional Accessories

17

Power Source: 24 V DC, M3 screw terminal, distance between barriers: 6.4mmCurrent Consumption: 110 mAGroup Input: Max. 20 groupsNo. of Speaker Control Lines: Max. 50 lines Display Section: Power indicatorOperating Temperature: 0°C to +40°C

FS-7006PA (600W)FS-7012PA (1200W)Power Amplifier

FS-7000RFRemote Microphone Interface Panel

FS-7000GMGroup Matrix Panel

Power Source: 24V DC, M3 screw terminal, distance between barriers: 6.4mmCurrent Consumption: 60mANo of Speaker Control Lines: Max. 50 linesPriority Control: Last-in-1st-out priority/1st-in-1st-out priority/individual priority/no priority (selectable)Group Broadcast: Broadcast possible to up to 20 groups by connecting optional FS-7000GMNo. of Connectable FS-7000RM Units: Max. 4, M3.5 screw terminal, distance between barriers: 7.2mm

Operating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: 482 (W) × 44 (H) × 334.7 (D) mmWeight: 3 kgAccessory: Circuit board × 1, EH connector (10 pins) × 7, Diode × 200, Circuit board mounting screw × 8, EH-SMP connector × 5, Connection cable (10 pins, 2.5 m) × 7

Cable Distance: Total 800m max.Display Section: Power indicator, Fault indicatorOperating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: 482 (W) × 88.4 (H) × 334.7 (D) mmWeight: 4.2 kgAccessory: Connection cable (6 pins, 2.5 m) × 1, Connection cable (10 pins, 2.5 m) × 1, Removable terminal plug (3 pins) × 1

Power Source: 230 V AC, 50 HzPower Consumption: FS-7006PA: 1,090W (1,540VA) (at rated output), 390W (600VA) (IEC 65), 58W (110VA) (at no signal), 13W (14VA) (standby)/FS-7012PA: 2,130W (2,670VA) (at rated output), 750W (950VA) (IEC 65), 58W (110VA) (at no signal), 13W (14VA) (standby)Input: 0dB*, 10kΩ, transformer-balanced, removable terminal block (3 pins)Rated Output: FS-7006PA: 600W/FS-7012PA: 1,200WLoad Impedance: FS-7006PA: 100V line, 16.7Ω, M4 screw terminal, distance between barriers: 9mm/FS-7012PA: 100V line, 8.3Ω, M4 screw terminal, distance between barriers: 9mmFrequency Response: 80 –15,000 Hz, within ±3 dB (1kHz)Distortion: 0.1% or less (at 1kHz rated output)S/N Ratio: 90dB or more, 20 – 20,000Hz band passControl Input: Volume control bypass control input: No-voltage

make contact input,open voltage: Under 24V DC, short-circuit current: Under 10mA, removable terminal block (2 pins)Indicator: Power (green), Signal (green), Peak (red), Fault (red), Bypass (orange)Cooling: Forced air cooling (Under 50°C: Stop, 50°C – 75°C: Low to high speed (variable), Over 75°C: High speed)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, AlumiteDimensions: 482 (W) × 132.6 (H) × 532.7 (D) mm Weight: FS-7006PA: 24.8 kg/FS-7012PA: 35.4 kgAccessory: Terminal cover × 1, Terminal cover mounting screw × 2, Removable terminal plug (2 pins) × 2, Removable terminal plug (3 pins) × 2Option: Amplifier auto switching module: YA-7000

*0dB = 1V

FS-7000RMRemote Microphone

Power Source: 24V DC (operating range: 20 – 30V DC) (supplied from RJ45 connector or power input jack)Usable power input plug: 5.5mm outer diameter, 2.1mm inner diameter, and 9.5mm long.Current Consumption: 90mAOutput: 0dB*, 600Ω, balanced, RJ45 connectorExternal Microphone: -40dB*, 2.2kΩ, unbalanced, mini jack, phantom powering InputDistortion: Under 1%Frequency Response: 100 – 20,000HzS/N Ratio: Over 60 dBOutput Control: 10 individual zones + all-zone call or 10 group zones + all-zone call (when optional FS-7000GM is connected)(individual zones expandable to up to 50 zones using optional FS-7010RM)Operating Section: All-zone selection key, Chime key, Broadcast reset key, zone selection keys, Talk key

Display Section: Power indicator, Fault indicator, Busy indicator, All-zone call indicator, Zone indicatorsOperating Temperature: 0°c to +40°COperating Humidity: Under 90% RH (no condensation)Finish: ABS resin, bluish grayDimensions: 190 (W) × 76.5 (H) × 215 (D) mm (gooseneck microphone excluded)Weight: 900gAccessory: Connection cable (3 m) × 1

*0dB = 1V

Power Source: 24 V DC, M3 screw terminal, distance between barriers: 6.4mmCurrent Consumption: 450 mAPower Amplifier Input: Priority input: 100 V line: max. 1200W, M4 screw terminal, distance between barriers: 9mmBGM input: 100 V line: Max. 1200W, M4 screw terminal, distance between barriers: 9mmSpeaker Output: 10 lines each for H and C, M3 screw terminal, distance between barriers: 6.4mm (100 V line, Max. 280W for FS-7006PA, Max. 500W per line for FS-7012PA)Line Short-Circuit Protection: ø5mm tubed fuse 0.5A × 10 fuses preinstalled (Fuse capacity must be changed depending on the load capacity.)External Control Output: General urgency/Emergency mode output terminal: Open collector output, rated voltage: 30V DC, current capacity: 0.1A, removable terminal block (2 pins)/

Power remote output terminal: Relay contact output, rated voltage: 30V DC, current capacity: 1A, removable terminal block (2 pins)Operating Section: BGM zone selection keysDisplay Section: Power indicator, Speaker lien indicators (Green: BGM in progress (2-channel broadcast mode)/Orange: BGM in progress (1-channel broadcast mode), priority broadcast, and emergency broadcast/Red: short-circuit)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: 482 (W) × 88.4 (H) × 340.7 (D) mmWeight: 4.2 kgAccessory: Fuse (0.5 A) × 2, Connection cable (10 pins, 2.5 m) × 1, Connection cable (4 pins, 2.5 m) × 1, Removable terminal plug (2 pins) × 2

FS-7000JPJunction Panel

FS-7000EVVoice Evacuation Panel

Power Source: 24 V DC, M3 screw terminal, distance between barriers: 6.4mmCurrent Consumption: 130mAEmergency Announcement: Evacuation announcement (repeated continuously) and false alarm announcement (repeated twice)Emergency Warning Language: English (default)Emergency Warning Tone: 44.1kHz sampling frequency, 16-bit PCMEmergency Recording Time: Up to 3 minutes for both evacuation and false alarm announcements togetherRecording System: USB data transfer or analog recordingFrequency Response: 20 – 20,000 Hz ±3dB (1kHz)Distortion: 1% or less (1 kHz, rated output)Recording Input: Mic: -60dB*, 2.2kΩ/Line: -20dB*, 10 kΩ (Mic/Line switchable), unbalanced, mini jackOutput: EV audio output: 0dB*, 600Ω, unbalanced, removable terminal block (2 pins)/Headphone output: 0dB*, 100Ω, unbalanced mini jackExternal Control Input/Output: Emergency ON output: Relay contact output, rated voltage: 30V DC, current capacity: 1A, removable terminal block (2 pins)/Emergency control contact output: Relay contact output, rated voltage: 30V DC, current capacity: 1A, removable terminal block (3 pins)/

Automatic fire alarm system confirmation signal input:No-voltage make contact input, open voltage: 24V DC,short-circuit current: 6mA, removable terminal block (2 pins)/Emergency power controlControl: Rated voltage: 24V DC, current capacity: 100mA,M3 screw terminal, distance between barriers: 6.4mm/Start: Open collector output, rated voltage: 30V DC, current capacity: 100mA, M3 screw terminal, distance between barriers: 6.4mmOperating Section: Emergency activation button, Emergency reset button, Evacuation announcement button, False alarm announcement button, and Mode selection switchDisplay Section: Power indicator, Fire indicator, Evacuation announcement indicator, False alarm announcement indicator, and USB communications indicator (rear panel)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Aluminum, black, alumiteDimensions: 482 (W) × 88.4 (H) × 341.7 (D) mmWeight: 4 kgAccessory: Connection cable (5 pins, 60 cm) × 1, Removable terminal plug (2 pins) × 3, Removable terminal plug (3 pins) × 1

*0dB = 1V

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

FS-7000 Series System Image

18

FS-7000JP

FS-7000AT

FS-7012PAYA-7000

ATT

FS-7000EV

FS-7000GMFS-7000GM

FS-7000RF

FS-7000RMFS-7010RM

Audio Signal

Control Signal

FS-7000JP

FS-7000AT

FS-7012PAYA-7000

ATT

FS-7000JP

FS-7000AT

FS-7012PAYA-7000

ATT

FS-7000JP

FS-7000AT

FS-7012PAYA-7000

ATT

FS-7000JP

FS-7000AT

FS-7012PAYA-7000

ATT

FS-7000CP

FS-7010CP

FS-7010CP

FS-7010CP

FS-7010CP

FS-7010CP

FS-7010CP

PBX

Automatic fire alarm system

BGM player

Timer operatedsound source

Power Source: Supplied from the FS-7000RM (option)Current Consumption: 15mA (increment in FS-7000RM's current consumption)Operating Section: Zone selection keysDisplay Section: Zone indicatorsOperating Temperature: 0°c to +40°COperating Humidity: Under 90% RH (no condensation)Finish: ABS resin, bluish gray

FS-7010RMRemote Microphone Extension

Dimensions: 110 (W) × 76.5 (H) × 215 (D) mmWeight: 350gAccessory: Connection cable (8 pins, 8 cm) × 1, Linkage bracket A × 2, Linkage bracket B × 1, Screw for linkage bracket × 12

*0dB = 1V

YA-7000Amplifier Auto Switching Module

Power Source: 24V DC (supplied from the power amplifier)Power Consumption: 70mAInput: Main amplifier input: Connects to the main amplifier's output (100V line), M4 screw terminal, distance between barriers: 9mm/Standby amplifier input: Connects to the standby amplifier's output (100V line), M4 screw terminal, distance between barriers: 9mmOutput: Connects to the speaker line (100V line), M4 screw terminal, distance between barriers: 9mm

Detected Fault Indication: Power amplifier's fault indicator lightsOperating Temperature: 0°c to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Surface-treated steel plate, black, pointDimensions: 178 (W) × 61.2 (H) × 73 (D) mm Weight: 240 gAccessory: Terminal cover × 1, Terminal cover mounting screw × 2, Amplifier mounting screw × 2Applicable Power Amplifier (option): FS-7006PA, FS-7012PA

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Digital Announcers

Program Timer

Sound Repeater

1918

Rack Mount Equipment and Others

Power Source: 220 – 240V AC (301H version)/110 –120V AC (304L version) , 50/60Hz, Power Consumption: 3WDisplayed Contents: Day of the week, hour and minuteProgram Item: Day of the week, hour, minute, output channelNumber of Channels: 4 channels (A, B, C, D)Output System: No-voltage (DRY) make contact (5-second pulse make output)Output Capacity: 24V DC, 0.5AOutput Terminal: M4 screw terminal, distance between barriers 9mm

TT-104B(301H/304L version)Program Timer

Program Capacity: 30 steps per channelClock Accuracy: ±5 sec. per month (25°C)Power Outage Protection: 100hrs.Operating Temperature: 0 to 50°CFinish: Panel: Aluminum, black, 30% gloss, paint/Case: pre-coated steel plate, black Dimensions: 420 (W) × 47.5 (H) × 246.5 (D)mmWeight: 2.5kgOption: Rack-mounting bracket: MB-15B

Power Source: 220 – 240V AC (CE version)/110 – 120V AC (314L version) , 50/60Hz 0.1A or 24V DC, 0.4APower Consumption: 12W Output: Output 1, 2; 0dB*, 600Ω, unbalanced, phone jack, M3.5 screw terminal/Headphone output; 0dB*, 100Ω, unbal-anced, phone jackInput: Microphone; -55dB*, 600Ω, unbalanced, phone jack/AUX; -20dB*, 10kΩ, unbalanced, phone jack/RCA pin jackFrequency Response: 20Hz – 20kHz ±3dB (44.1kHz sampling)/20Hz – 14kHz (32kHz sampling)/50Hz – 20kHz ±3dB (44.1kHz sampling, IT-450 mounted)/50Hz – 14kHz ±3dB (32kHz sampling, IT-450 mounted)Distortion: 0.3% or less (44.1kHz, recording method: Ex-tremely High)No. of Mountable Memory Card: 2 (Ports A – B) (option)No. of Recording Sentence: When 1 card is installed: 128 or 512 (changeable)/When 2 cards are installed; 256 or 1024 (changeable)/1 emergency sentence, other than the above sentences, can be recorded./When recorded by a control input; 8 (direct mode) or 256 (binary mode) (changeable)Recording Sound Quality: Sampling Frequency; 32kHz, 44.1kHz/ Recording grade; Long (bit rate: 64kbps), Normal (bit rate: 96kbps), High (bit rate: 128kbps), Extremely High (bit rate: 192kbps)Recording Time (When recording 128 sentences): EV-CF128M; Long; 4 hr 26 min 46 s, Normal; 2 hr 57 min

50 s, High; 2 hr 13 min 23 s, Extremely High; 1 hr 28 min 55 sPlayback Mode: Single- and dual-source playback (changeable)No. of Playback Program: Direct control; 8 programs or Binary control; 256 programs/1 emergency message takes precedence over the above programs and is played backControl Input: Activation 1 – 8, playback, pause 1, pause 2, emergency, recording, erasure/clear: No-voltage make contact input, pules make length: 50 m or more, open voltage; 30V DC, short circuit current; 10mA, M3.5 screw terminal, distance between barriers; 8.2mm/RS-232C terminal; D-sub connector (9-pin, male)Control Output: Shorting output 1, 2, Error; M3.5 screw termi-nal, contact capacity; 30V DC, 0.5A Operating Display: LCD with backlight (16 characters × 2)Operating Temperature: 0°C to +50°COperating Humidity: 90% or less (no condensation)Finish: Panel; Aluminum, black, 30% gloss, paint/Case; Surface treated steel plate, black 30% glossDimensions: 482 (W) × 44 (H) × 315 (D)mmWeight: 4kgAccessory: Power cord × 1, Unbalanced-phone plug (2m) × 2, Rubber foot × 4, Rack mounting screw x , Rack mounting washer × 4, Rack mounting bracket (Pre-fixed to the unit) × 2

*0dB = 1V

EV-350R(CE/314L version)Digital Record/Playback Announcer

EV-350P(CE version)Digital Playback-Only Announcer

Power Source: 220 – 240V AC, 50/60Hz 0.1A or 24V DC, 0.3APower Consumption: 9WOutput: Output 1, 2; 0dB*, 600Ω, unbalanced, phone jack, M3.5 screw terminal distance between barriers; 8.2mm/Head-phone output; 0dB*, 100Ω, unbalanced, phone jackInput: AUX; -20dB*, 10kΩ, unbalanced, phone jack/Frequency Response: 20Hz – 20kHz ±3dB (44.1kHz sampling)/20Hz – 14kHz ±3dB (32kHz sampling)/50Hz – 20kHz ±3dB (44.1kHz sampling, IT-450 mounted)/50 – 14kHz ±3dB (32kHz sampling, IT-450 mounted)Distortion: 0.3% or less (44.1kHz, recording method: Extremely High)No. of Mountable Memory Card: 2 (Ports A – B) (option)Playback Mode: Single- and dual-source playback (changeable)No. of Playback Program: Direct control; 8 programs or Binary control; 256 programs/1 emergency message takes precedence over the above programs and is played backControl Input: Activation 1 – 8, playback, pause 1, pause 2, emergency, clear: No-voltage make contact input, pules make length: over 50 ms, open voltage; 30V DC, short-circuit cur-rent; 10mA, M3.5 screw terminal, distance between barriers; 8.2mm/RS-232C terminal; D-sub connector (9-pin, male)Control Output: Shorting output 1, 2, Error; M3.5 screw termi-nal, distance between barriers; 8.2mm, contact capacity; 30V DC, 0.5A Operating Display: LCD with backlight (16 characters × 2)Operating Temperature: 0°C to +50°COperating Humidity: 90% or less (no condensation)

Finish: Panel; Aluminum, black, 30% gloss, paint/Case; Surface treated steel plate, black 30% glossDimensions: 482 (W) × 44 (H) × 315 (D)mmWeight: 4kgAccessory: Power cord × 1, Unbalanced-phone plug (2m) × 2, Rubber foot × 4, Rack mounting screw x , Rack mounting washer × 4, Rack mounting bracket (Pre-fixed to the unit) × 2

*0dB = 1V

EV-CF128MMemory Card

Type: Adapter: Type II which complies with PCMCIA/JEIDA ATA flash memory card/Card: Compactible with CompactFlashTM specification CompactFlash cardMemory Capacity: 128MBDimensions: 54 (W) × 85.6 (H) × 5.0 (D)mmWeight: 33g

For EV-350R/EV-350P Digital Announcers.

Power Source: Supplied from an external 24V DC/400mA power supply or from an optional AD-246 AC adapterPower Consumption: 10W (rated output)Wave Format: 44.1kHz sampling frequency, 16-bit PCM (monaural)Frequency Response: 20Hz – 20kHz, ±3dB (1kHz)50Hz – 20kHz, ±3dB (IT-450 mounted, 1kHz)Distortion: Under 1% (1kHz, rated output)Recording System: USB data transfer or analog recordingControl Input: Play 1 – 4, stop: No-voltage make contact input, pulse make length : 200ms, open voltage: 30V DC, short-circuit current : 10mA removable terminal block (22 pins)

Accessory: CD-ROM (USB data transfer software and sample chimes recorded) × 1, Unbalanced-phone plug × 1, USB cable (1m) × 1, Terminal block type connector (22 poles) × 1,Rubber foot × 4Option: Rack mounting bracket: MB-WT3 (for rack mounting one EV-20R unit)/MB-WT4 (for rack mounting two EV-20R units)AC adapter: AD-246

* 0dB = 1V*2 These audio sources are also contained in the supplied CD-ROM as

sample audio data

USB Data Transfer Software Operation EnvironmentPersonal Computer: Windows PC (equipped with the USB terminal)Main Specifications: CPU: Pentium compatible CPU of 300MHz or fasterMemory: 128MB or moreFree disk space: 10MB or moreOptical driver: CD-ROM driveOS: Windows XP (32-bit edition)/Vista (32-bit edition)/7 (32-bit edition)

*Pentium is a registered trademark of Intel Corporation.*Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.*Other company names and products are also trademarks of individual companies.*Line input and Line output can be converted to balanced type using an optional IT-450 transformer.

EV-20RDesktop Type

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ents

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Control Output: Busy: Contact capacity: 30V DC/0.5A, removable terminal block (22 pins) Input: Input / Recording input: Mic: -60dB*, 2.2kΩ/Line: -20dB*, 10kΩ,(Mic/Line changeable), unbalanced, phone jack/Line input: 0dB*, 10kΩ, unbalanced, removable terminal block (22 pins)Output: Line output: 0dB*, 600Ω, unbalanced, removable terminal block (22 pins)/Headphone output : 0dB*, 100Ω, unbalanced, phone jack/Speaker output : 3W, 8Ω, removable terminal block (22 pins)LED Indicator: POWER, USB, START/STOP 1 – 4Maximum No. of Messages: 4Pre-recorded audio data: Message 1, Westminster chime*2/Message 2, Ascending 4-tone chime*2/Message 3, Descending 4-tone chime*2/Message 4, NoneNote: The above audio sources can be overwritten by using the supplied software.Maximum Recording Time: 6 minMessages Delay Time: 0, 2s or 4s (selectable)Playback Interval Time: ∞, 0, 5s, 10s, 30s, 1 min, 5 min, 10 min, 30 min or 1 h (selectable) Operating Temperature: 0°C to +40°COperating Humidity: Under 90% (no condensation)Finish: Case: ABS resin, blackDimensions: 210 (W) x 44.2 (H) x 181 (D)mm (excluding projection)Weight: 730g

AM/FM Tuner

Multi-Channel Monitors

Mixer Preamplifier and Optional Accessory

2120

Power Source: 120V AC, 60Hz (supplied from the AC adapter accessory)Power Consumption: 180mA (when AC adapter (accessory) is used)Receiving Frequency: FM: 87.9 – 107.9MHz (200kHz steps)/AM: 520kHz – 1710kHz (10kHz steps)Antenna Input: FM: 300Ω (balanced), 75Ω (unbalanced)/AM: Loop antenna (balanced), external antenna (unbalanced)Audio Output: Stereo: -15dB*, 10kΩ, unbalanced, RCA jack/Monaural: -15dB*, 10kΩ, unbalanced, M3 screw terminal, distance between barriers: 6.4mm, RCA jack

DT-930(UL version)Synthesized AM/FM Tuner

Channels of Memory: 40 channels in total for AM and FM broadcastsOperating Temperature: 0°C to +40°CFinish: Panel: Aluminum (hair-line finish), black/Case: Pre-coated steel plate, blackDimensions: 420 (W) × 53 (H) × 295 (D)mmWeight: 2.8kgAccessory: AC adapter × 1, FM antenna × 1, AM loop antenna × 1, RCA stereo cord (1m) × 1Option: Mounting bracket kit: MB-15B,

*0dB = 1V

YA-8Connection Cable for MP-1216

Power Source: 220 – 240V AC (H version)/120V AC (US version), 50/60HzPower Consumption: 21W (120V AC version), 25W (220 – 240V AC version)Max. Display Level: Speaker(High impedance: 100VLow impedance: 1200W/ 8Ω)Line: +10dB (2.45V)Level Meter: 12-point display, -30dB – +6dB (0.3W – 1200W/ 8Ω) Speaker Output: Max. 3WHeadphone Output: 8ΩFinish: Front panel: Alumite, blackDimensions: 482.6 (W) × 88.4 (H) × 312.7 (D)mmWeight: 5.3kgAccessories: AC fuse, 250V 1A (120V version) × 1, AC fuse, 250V 1259mA (220 – 240V version) × 1, Rack mounting screw × 4

MP-1216(H/US version)Multi-Channel Monitor

• 1m long • 8P DIN plug

MP-011Monitor Panel

MP-032BMonitor Panel

Power Source: 24V DCPower Consumption: 400mAInput: 10 zone high impedance level; 50V, 70V, 100V (select-able)/Line level; 0dBV (1V)Monitor Speaker: 33 × 140mm dynamic speaker, 3W/8ΩMeter: 7-point LED meterControl Signal Input: Emergency control signal (bypasses volume control)/Talk switch signal (feedback prevention)Dimensions: 482 (W) × 44 (H) × 219.1 (D)mmWeight: 2.5kgColor: Black

Functions: Aural/Visual monitoring (up to 10 power amplifiers)Controls: Channel selector switchMonitor volume controlWatt meterLine voltage selector switchSpeaker: Full-range 12cm speakerInput Lines: 25V (625Ω), 50V (2.5kΩ), 70V (5kΩ),100V (10kΩ) switchableTerminals: M4 screw terminals, distance between barriers: 8.8mmFinish: Surface-treated steel plate, black Dimensions: 483 (W) × 133 (H) × 87 (D)mmWeight: 2.2kgAccessories: Rack mounting screw (with washer) × 4

Power Supply: 24V DC (supplied from PP-025B)Chime: Ascending 4-tone, 2-tone chime, Gong, 1-tone chime, Descending 4-tone chimeAccessories: Chime connection cord × 1, Screw (M3 × 6) × 1

CK-025Optional Chime Unit for PP-025B

Power Source: 24V DCCurrent Consumption: Under 200mAInput: Input 1-A; -2/-62dB* 600Ω, balanced phone jack/Input 1-B; -2dB* 600Ω balanced phone jack/Input 2 A; -2/-62dB* 600Ω balanced phone jack/Input 2-B; -2dB* 600Ω balanced phone jack/Input-3A; -2dBV 20kΩ unbalanced phone jack/Input 3-B; -2dB* 20kΩ unbalanced phone jack/Input 3-C; -2/-22dB* 50kΩ unbalanced phone jack, pin jack/Input 3-D; -22dB* 50kΩ unbalanced phone jack, pin jackOutput: Line out 1; 0dB* 600Ω balanced, all inputs (input 1/2 are output when using the line out 2.)/Line out 2; 0dB* 600Ω unbalanced (Input 3 is output.)/REC out; -10dB* 5kΩ unbalanced (input 1/2 are output when using the line out 2.)Frequency Response: 50 – 15,000Hz ±3dB (1kHz)Tone Control: 100Hz, 10kHz ±10dBS/N: Over 60dBDistortion: Under 1%Priority: Priority order; Input 1 > Input 2 > Input 3Priority signal: Input levelFinish: Panel: Pre-coated steel plate, black, 30% gloss

PP-025BMixer Preamplifier

Dimensions: 482 (W) × 88.4 (H) × 218 (D)mmWeight: 3kgAccessories: Phone plug/phone plug connection cord (balanced) × 1, Power supply cable × 1, Rack mounting screw (with washer) × 4, Rack mounting bracket (preinstalled on the unit) × 2, Input indication label × 1, 5P DIN plug × 1Option: Chime unit; CK-025*0dB = 1V

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ents

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Rack Mount Associated Equipment

Power Supplies and Batteries

21

AD-011(314L version)DC Power Supply Panel

DS-029B(301H/314L version)Emergency Power Supply unit(Ni-Cd Type)

Power Source: 110V AC, 50/60HzPower Consumption: 140VA (rated output)Input: 24V DC, M4 screw terminal, distance between barriers: 8.8mmOutput: AC operation; 24V DC ±0.5V, 2.5A/DC operation; 1V below input DC voltageM4 screw terminal, distance between barriers: 8.8mm

Power Source: 220V,/240V AC (301H version)/ 110/120V AC (314L version) , 50/60HzCurrent Consumption: 24VAApplicable Batteries: Sealed-type Ni-Cd batteries: NDC-2435 (3500mAh/5HR) for 120W/NDC-2460 (6000mAh/5HR) for 240W/Mounting space: Two batteriesCharging Method: Trickle chargeCharge Current: NDC-2435 (approx. 88mA)/NDC-2460 (approx. 150mA), switchableBattery Check Circuit: Automatic detection of battery voltage level by check starting signalFinish: Panel: Surface-treated steel plate, black, 30% gloss, paintDimensions: 482 (W) × 88.4 (H) × 346.1 (D)mmWeight: 5.4kg (excluding batteries)

Power Source: 220V/240V AC changeable, 50/60HzCurrent Consumption: 150VAApplicable Batteries: A212/ 24G5 (12V DC/ 24 Ah) × 2 or A212/ 36G6 (12V DC/ 36 Ah) × 2 (Made by Accumulatorenfabrik Sonnenschein GmbH) Charging Method: Trickle chargingCharging Current: Max. 2.5 AOperating Temperature: 0°C to +50°CFinish: Panel: Surface-treated steel plate, black, 30% gloss, paint

DS-1000B(301H version)Emergency Power Supply Unit (“dryfit” Type)

AD-031B(301H/314L version)DC Power Supply Panel

Power Source: 120V,/240V AC (301H version)/110V AC (314L version) , 50/60HzPower Consumption: 530VA (rated output)Input: 24V DC, M4 screw terminalOutput: AC operation; 24V DC ±0.5V, 10A, M4 screw terminalDC operation; 1V below input DC voltage, M4 screw terminalMain Power Output: 24V DC ±0.5V, 200mA (provided only when operated on AC), M4 screw terminalFinish: Panel: Surface-treated steel plate, black, 30% gloss, melamine-baked paintDimensions: 483 (W) × 132.6 (H) × 316 (D)mm

Dimensions: 483 (W) × 88 (H) × 281 (D)mmWeight: 7kgAccessory: Rack mounting bracket × 2, M5 Rack mounting screw (with washer) × 4, M4 Binding head screw × 4, Fuse (T 10A) × 2, Fuse (T 4A) × 1, Fuse (T 2A) × 1, Label × 1

NDC-2435/NDC-2460Ni-Cd Battery

PS-011BPower Switch Panel

Number of Terminals: 3 terminal blocks × 4 (18 terminals per block) (72 terminals in total)Current Capacity: 250V/20A per terminalColor: BlackDimensions: 483 (W) × 132.6 (H) × 285 (D)mmWeight: 3.5kg

JB-031BJunction box

Type: Power remote switchSwitch Capacity: 5A at 250V AC/10A at 125V ACFinish: Panel: Surface-treated steel plate, black, 30% gloss, paint Dimensions: 483 (W) × 44.5 (H) × 90 (D)mmWeight: 650gAccessory: Rack mounting screw (with washer) × 4, Fuse × 1

Power Source: 220 – 240V AC, 50/60HzPower Consumption: 16WAC Power Output: Switched; 20A max. × 13Unswitched; 10A max. × 5DC Power Output: 24DC, 0.2AFinish: Panel: Surface-treated steel plate, black, 30% gloss, paint Dimensions: 483 (W) × 89 (H) × 350 (D)mmWeight: 5.7kg Accessory: M4 Binding head screw × 2, Terminal cover × 1, Fuse × 3, Rack mounting screw (with washer) × 4

JP-028BJunction Panel

Battery Weight: NDC-2435; 3kg/NDC-2460; 4.7kgAccessory: Line cord (8m) × 1, Line cord (850mm) × 1, Junction connector × 1, Rack mounting screw (with washer) × 4, Rack mounting bracket (preinstalled on the unit) × 2, Fuses (0.5A × 3, 1A × 1, 5A × 1, 25A ×1)

Finish: Panel: Surface-treated steel plate, black, 30% glossDimensions: 482 (W) × 44 (H) × 235.3 (D)mmWeight: 5.4kgAccessory: Fuse (5A) × 1, Fuse (2A) × 1, Cable set × 1, Power cord (2m) × 1, Rack mounting screw (with washer) × 4, Rack mounting bracket (preinstalled on the unit) × 2

Weight: 18.6kgAccessory: Fuse (15A) × 1, Fuse (3A) × 1, Cable set × 1, Power cord (2m) × 1, Rack mounting screw (with washer) × 4

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ents

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

2322

BP-031B(301H version)Blower Panel

Power Source: 220V AC 50/60HzPower Consumption: 8.5WControl: 3-function switch (MANUAL/OFF/AUTO)Protection: 1 AC fuseAutomatic Operation: Thermal switch ON (when rack temperature exceeds 48°C)/Thermal switch OFF (when rack temperature drops below 38°C)Ventilation: 1500ml/minFinish: Panel: Surface-treated steel plate, black, 30% gloss, paintDimensions: 483 (W) × 133 (H) × 152.7 (D)mmWeight: 3.7kgAccessory: Rack mounting screw × 4, Fuse × 1

BU-412(301H/314L version)Blower Unit

Power Source: 240V AC (301H version)/110 – 120V AC (314L version) , 50/60HzPower Consumption: 17WVentilation: Max. 1.98m3/min. (50Hz), 2.15m3/min. (60Hz)Automatic Operation: Thermal switch ON(when rack temperature exceeds 35°C)Thermal switch OFF(when rack temperature drops below 30°C)Dimensions: 300 (W) × 51.2 (H) × 240 (D)mmWeight: 1.4kgAccessory: Fuse (0.5A) × 1, Fuse (0.315A) × 1

PF-1100Perforated Panel

PF-013B/023BPerforated Panel

• BK-013B: 1-size BK-023B: 2-size BK-033B: 3-sizeFinish: Panel: Pre-treated steel plate, black, 30% glossDimensions: BK-013B; 483 (W) × 44 (H) × 10 (D)mmBK-023B; 483 (W) × 88.5 (H) × 10 (D)mmBK-033B; 483 (W) × 44 (H) × 10 (D)mmWeight: BK-013B; 220g/BK-023B; 390g/BK-033B; 560gAccessory: Rack mounting screw (with fiber washer) × 4

BK-013B/023B/BK-033BBlank Panel

YA-706Rack Supporting Runner

(1 Pair)

SS-021BSpeaker Selector

CR-131N• With 13-unit space• Dimensions: 546 (W) × 674.5 (H) × 420 (D)mm• Color: Pale ivory

CR-273• With 27-unit space• Dimensions: 566 (W) × 1,364 (H) × 435 (D)mm• Color: Ivory

CR-413• With 41-unit space• Dimensions: 566 (W) × 2,000 (H) × 435 (D)mm• Color: Ivory

CR-413-6• Extra-deep type• With 41-unit space• Dimensions: 566 (W) × 2,000 (H) × 615 (D)mm• Color: Ivory

Cabinet Racks

CR-131N/273/413/413-6Cabinet Rack

YA-706

• To support heavy rack equipment.• Applicable racks: CR-273, CR-413 & CR-413-6.

CR-131N CR-273CR-413/CR-413-6

Type: 10 lines speaker selectorControl Switch: 10-individual speaker selector switches1 all-call switch with remote control facility.Max. Control Power: Up to 1,000W.Terminal: M4 screw terminal, distance between barriers: 8.8mmFinish: Panel: Surface-treated steel plate, black, 30% gloss, paintDimensions: 483 (W) × 88.5 (H) × 266.2 (D)mmWeight: 3.55kgAccessory: Indication card × 1, Rack mounting screw (with washer) × 4

Finish: Surface-treated steel plateWeight: 720g (2 pieces)Accessory: Rack mounting screw × 1 set

• 1-unit size.Finish: Aluminum, blackDimensions: 483 (W) × 44 (H) × 14.5 (D)mmWeight: 120gAccessory: S tight (M5 × 20) (Black) × 4

• PF-013B: 1-size, PF-023B: 2-sizeFinish: Panel: Pre-treated steel plate, black, 30% glossDimensions: PF-013B; 483 (W) × 44 (H) × 10(D)mmPF-023B; 483 (W) × 88.5 (H) × 10 (D)mmWeight: PF-013B; 160g/PF-023B; 280g/Accessory: Rack mounting screw (with fiber washer) × 4

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ents

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Network Audio Adapters

System Image

23

Network Related Systems

NX-100Network Audio Adapter

NX-100SNetwork Audio Adapter

Power Source: AC adapter AD-246 (optional) or the equivalentCurrent Consumption: 7W (when AD-246 (optional) is used)Audio Input: 1 channel (transformer-isolated), -58dB* to 0dB*, balanced (MIC/LINE changeable, volume adjustable with volume control), 2kΩ, removable terminal block (3 pins), phantom power supply (24V, can be set with the switch)Audio Output: 1 channel (transformer-isolated), balanced, 600Ω, removable terminal block (3 pins)Frequency Response: 50 – 14,000Hz (when sampling frequency is 32kHz)Distortion: Under 0.3% (1kHz, when sampling frequency is 32kHz)Control Input: 8 channels, no-voltage make contact input, open voltage: 12V DC, short-circuit current: 10mA, removable terminal block (9 pins)Control Output: 8 channels, open collector output, withstand voltage: 30V DC, control current: 50mA max., removable terminal block (9 pins)Network I/F: 10BASE-T/100BASE-TX, Auto-NegotiationNetwork Protocol: TCP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio packet Transmission System: Unicast (up to 4 simultaneous transmissions), Multicast (up to 64 simultaneous transmissions)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no dew condensation should be produced)Finish: Steel plate, black, 30% glossDimensions: 210 (W) × 44.7 (H) × 188 (D)mmWeight: 1.2kg

Power Source: 24V DC (removable terminal block (3 pins)) or AC adapter AD-246 (optional) or the equivalentCurrent Consumption: 200mA (DC operation)Audio Input: 1 channel (transformer-isolated), -58dB* to 0dB*, balanced (MIC/LINE changeable, volume adjustable with volume control), 2kΩ, removable terminal block (3 pins)Audio Output: 1 channel (transformer-isolated), balanced, 600Ω, removable terminal block (3 pins)Frequency Response: 50 – 14,000Hz (when sampling frequency is 32kHz)Distortion: Under 0.3% (1kHz, when sampling frequency is 32kHz)Control Input: 8 channels, no-voltage make contact input, open voltage: 12V DC, short-circuit current: 10mA, removable terminal block (9 pins)Control Output: 8 channels, open collector output, withstand voltage: 30V DC, control current: 50mA max., removable terminal block (9 pins)Network I/F: 10BASE-T/100BASE-TX, Auto-NegotiationSerial I/F: RS-232C (DCEI/F), D-sub connector (9P, male), 9600bps – 115200bpsNetwork Protocol: TCP, UDP, ARP, ICMP, HTTP, RTP, IGMP

Audio packet Transmission System: Unicast (up to 4 simultaneous transmissions), Multicast (up to 64 simultaneous transmissions)Operating Temperature: 0°C to +50°C (0°C to +40°C when AC adapter is in use)Operating Humidity: Under 90% RH (no dew condensation should be produced)Finish: Steel plate, black, 30% glossDimensions: 210 (W) × 44.7 (H) × 188 (D)mmWeight: 1.2kgAccessory: Bracket mounting screw × 8, CD (PC Installation & Operation software programs, Instruction manuals) × 1, Power supply removable terminal plug (3 pins) × 1, Audio I/O removable terminal plug (3 pins) × 2, Control I/O removable terminal plug (9 pins) × 2, RS-232C connector cover × 1Option: Rack mounting bracket: MB-15B-BK (for rack mounting one NX-100 unit), MB-15B-J (for rack mounting two NX-100 units)/AC adapter: AD-246

* 0dB = 1VNote: When you need the AC adapter, be sure to consult your TOA dealer.

Accessory: Bracket mounting screw × 8, CD (PC Installation & Operation software programs, Instruction manuals) × 1, Audio I/O removable terminal plug (3 pins) × 2, Control I/O removable terminal plug (9 pins) × 2, Ferrite clamp × 1Option: Rack mounting bracket: MB-15B-BK (for rack mounting one NX-100S unit), MB-15B-J (for rack mounting two NX-100S units)/AC adapter: AD-246

* 0dB = 1VNote: When you need the AC adapter, be sure to consult your TOA dealer.

AD-246AC Adapter

Optional Accessory

Headquarters

Setting/operationsoftwaresupplied with the NX-100

Base

Branch office

Speaker

ASDL or ISDN

PCRemote Multi-Point Access Broadcast System

LAN

Amplifier

Speaker

Amplifier

InternetRouter

Modem router

Dedicatedline

Dedicated line

Dedicatedline

Router

LAN

LAN

PC

Sound source

equipment

MIXER

Network Audio Adapter



Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Exchanges

Interface Units

2524

N-8000EX (Internal: 4 links/External: 8 links)

(CE/CU version) Network Intercom Exchange

IP Network Intercom Systems

Power Source: 230V AC (CE version)/120V AC (CU version), 50/60HzPower Consumption: 50W (at rated), 75W (max.)Interface Section for stationNumber of lines: 16 linesNumber of speech link: Internal: 1/External: 2 Type of Speech Path: Space sharing/Time Space sharingTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: 0dB* or lessTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Speech Method: Simultaneous conversation by way of echo canceller (Hand-free), Simultaneous conversation by way of echo canceller or Half-duplex conversation by way of voice switch (Handset), PTT conversationConnecter: Dedicated connectorWiring method: 1 set of twisted pair cableFeeding voltage/current: 48V DC, Max. 70mAPaging Output: Station paging onlyNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: Unicast (max. 16), Multicast (max.191)

Power Source: 230V AC (CE version)/120V AC (CU version), 50/60HzPower Consumption: 50W (at rated), 75W (max.)Interface Section for stationNumber of lines: 16 linesNumber of speech link: Internal: 4/External: 8 Type of Speech Path: Space sharing/Time Space sharingTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: 0dB* or lessTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Speech Method: Simultaneous conversation by way of echo canceller (Hand-free), Simultaneous conversation by way of echo canceller or Half-duplex conversation by way of voice switch (Handset), PTT conversationConnecter: Dedicated connectorWiring method: 1 set of twisted pair cableFeeding voltage/current: 48V DC, Max. 70mAPaging Output: Audio: 2 channels Max. 0dB*, 600Ω, balanced/ Control: 2 channels, relay contact output, contact capacity: 24V DC/0.5A/Connector: Removable terminal blockNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast

N-8010EX (Internal: 1 link/External: 2 links)

(CE/CU version) Network Intercom Exchange

Number of paging destinations: Unicast (max. 16), Multicast (max.191)Connector: RJ45 connectorVoice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lampOthers: Firmware update function, System data hold function, Reset switch (front panel)Forced air cooling, Time of day hold facilityInstallation Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: 90% or less RH (no condensation)Finish: Pre-coated steel plate, black, 30% gloss Dimensions: 420 (W) × 44.3 (H) × 356 (D)mmWeight: 4.1kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Detachable terminal plug (4P) × 2, Detachable terminal plug (2P) x 20, Plastic foot × 4, Screw for fitting plastic foot x 4, Rack mounting bracket × 2, Screw for rack mounting × 4, Wall mounting bracket × 2, Screw for mounting bracket × 8, Screw for wall mounting × 4

*0dB = 1V

Connector: RJ45 connectorVoice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lampOthers: Firmware update function, System registration data hold facility, Time of day hold facility, Forced air cooling, Reset switch (front panel)Setting Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Pre-coated steel plate, black, 30% glossDimensions: 420 (W) × 44.3 (H) × 349 (D)mmWeight: 4.2kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Detachable terminal plug (2P) x 20, Plastic foot × 4, Screw for fitting plastic foot x 4, Rack mounting bracket × 2, Screw for rack mounting × 4, Wall mounting bracket × 2, Screw for mounting bracket × 8, Screw for wall mounting × 4

*0dB = 1V

N-8000MI (CE/CU version)Multi Interface Unit

Power Source: 230V AC (CE version)/120V AC (CU version), 50/60HzPower Consumption: CE version: 19W (180mA) (at rated), 24W (230mA) (max.)/CU version: 16W (250mA) (at rated), 21W (330mA) (max.)Audio Input*3: Input: 2 inputs (2P/input), Max. 0dB*1, 600Ω or less, balanced, with a semi-fixed volume for adjustment (0 to -25dB)/Control: 2 inputs (2P/input), no-voltage make contact input, open voltage: 12V DC, short-circuit current: 10mA/Removable terminal block (8 pins)Audio Output*3: Output: 2 outputs (2P/output), Max. 0db*1, 600Ω or less, balanced/Control: 2 outputs (2P/output), relay contact output, contact capacity: 24V DC/0.5A/Removable terminal block (8 pins)Control Input*3: 16 inputs, no-voltage make contact input, open voltage; 12V DC, short-circuit current: 10mA, removable terminal block (18 pins)Control Output*3: 16 outputs, relay contact output, contact capacity: 24V DC/0.5A, removable terminal block (18 pins)PBX I/F*3: PBX input and output: 2 channels, Max.: 0dB*2 or less, Average: -15dB*2 or less, 600Ω, balanced, mini-clamp connector (2 pins), with adjustment functions for both input and output (Input: 0 to +15dB, Output: -15 to 0dB), Analog E & M interfaceTie-line I/F*3: Tie-line input and output: 2 channels, Max.: 0dB*2 or less, Average: -15dB*2 or less, 600Ω, balanced, mini-clamp connector (2 pins)/Signal method: EXES-2000/EXES-6000 tie-line method/Selective signal: DTMF signalNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Connector: RJ45 connector

Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bit Voice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lampOthers: Firmware update function, System registration data entry hold facility, Time of day hold facility, Reset switch (front panel)Installation Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: 90% or less RH (no condensation)Finish: Pre-coated steel plate, black, 30% glossDimensions: 420 (W) × 44.3 (H) × 239.5 (D)mmWeight: 2.8kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Mini-clamp plug (2 pins) × 10, Remote terminal plug (8 pins) × 2, Removable terminal plug (9 pins) × 4, Plastic foot × 4, Screw for fitting plastic foot x 4, Rack mounting bracket × 2, Screw for rack mounting × 4, Wall mounting bracket × 2, Screw for mounting bracket × 8, Screw for wall mounting × 4

*1 0dB = 1V*2 0dB = 0.775V*3 Each input and output can be combined in 9 patterns.

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

25

N-8000AF(CE/CU version) Audio Interface Unit

Power Source: 220 – 240V AC, 50/60Hz (CE version)/120V AC, 50/60Hz (CU version)Power Consumption: 8W (Max.)Telephone InterfaceNumber of Telephone Line: 1 lineContact Signal Type: DTMF signalMonitor Function: Line Loop detectionControl Function: Caller ID functionWiring Method: 1 pair of twisted pair cablesShort-Circuit Current: 120mAOpen Voltage: 24V DCCeiling Signal Output Voltage: Max. 80V (0-p) AC (16Hz)Network SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP Audio Packet Transmission System: Unicast, MulticastNumber of Paging Destinations: Unicast (max. 8), Multicast (max. 191)Connector: RJ45 connectorVoice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)

Power Source: 230 – 240V AC, 50/60Hz (CE version)/120V AC, 50/60Hz (CU version)Power Consumption: 7W (Max.)Audio Input: 1 input (transformer isolated), -58dB* to 0dB*, 2kΩ, balanced (MIC/LINE input, controllable on the software) with input volume control knob, removable terminal block (3 pins)Audio Output: 1 output (transformer isolated), 0dB*, 600Ω, balanced, removable terminal block (3 pins)Control Input: 8 inputs, no-voltage make contact input, open voltage; 24V DC, short-circuit current: 5mA or less, removable terminal block (10 pins), (1 common terminal for 4 inputs)Control Output: 8 outputs, relay contact output, contact capacity: 24V DC/2 – 500mA, removable terminal block (16 pins)Time Sync Input: 1 input, no-voltage make contact input, open voltage: 24V DC, short-circuit current:5mA or less, removable terminal block (2 pins)Network SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP Audio Packet Transmission System: Unicast, MulticastNumber of Paging Destinations: Unicast (max. 8), Multicast (max. 191)Connector: RJ45 connectorVoice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, Cryptosystem

N-8000AL(CE/CU version) Telephone Interface Unit

Voice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lamp, Signal lamp, Peak lampOthers: Firmware update function, System registration data entry hold facility, Time of day hold facility, Reset switch (front panel)Setting Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Pre-coated steel plate, black, 30% gloss Dimensions: 210 (W) × 44.3 (H) × 267 (D)mmWeight: 1.7kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Removable terminal plug (2 pins) × 1, Removable terminal plug (3 pins) × 2, Removable terminal plug (5 pins) × 2, Removable terminal plug (8 pins) × 2, Plastic foot × 4, Screw for fitting plastic foot x 4Option: Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000AF unit)/MB-15B-J (for rack mounting two N-8000AF units), Wall mounting bracket: YC-850

*0dB = 1V

Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lamp, Line connection indication lampOther: Firmware update function, System data hold function, Reset switch (front panel)Setting Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Pre-coated steel plate, black, 30% gloss Dimensions: 210 (W) × 44.3 (H) × 267 (D)mmWeight: 1.7kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Mini-clamp plug (2 pins) × 1, Plastic foot × 4, Screw for fitting plastic foot x 4Option: Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000AL unit)/MB-15B-J (for rack mounting two N-8000AL units), Wall mounting bracket: YC-850

Power Source: 220 – 240V AC, 50/60Hz (CE version)/120V AC, 50/60Hz (CU version)Power Consumption: 16W (Max.)Contact Input: 32 inputs, no-voltage make contact input, open voltage: 24V DC, short-circuit current: 5mA or less, removable terminal block (20 pins), (1 common terminal for 4 inputs)Contact Output: 32 outputs, relay contact output, contact capacity: 24V DC/2 – 500mA, removable terminal block (32 pins)Network SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP Connector: RJ45 connectorIndication: Network LNK/ACT indication, Status lamp, Power-on indication lamp, Channel indication lamps (32 channels)Others: Firmware update function, System registration data entry hold facility, Time of day hold facility, Reset switch (front panel)Setting Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°C

N-8000DI(CE/CU version) Direct Select Unit

Operating Humidity: 90% RH or less (no condensation)Finish: Pre-coated steel plate, black, 30% gloss Dimensions: 420 (W) × 44.3 (H) × 267 (D)mmWeight: 2.8kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Removable terminal plug (10 pins) × 4, Removable terminal plug (16 pins) × 4, Plastic foot × 4, Screw for fitting plastic foot x 4, Rack mounting bracket × 2, Screw for rack mounting bracket × 8, Screw for rack mounting × 4Option: Wall mounting bracket: YC-850

Power Source: 220 – 240V AC, 50/60Hz (CE version)/120V AC, 50/60Hz (CU version)Power Consumption: 7W (Max.)C/O InterfacePublic Switched telephone networksNumber of Lines: 1 lineSelective Signal Type: DTMF signalSignal System: Compatible with loop start signalingWiring Method: 1 pair of twisted pair cablesNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP Audio Packet Transmission System: Unicast, MulticastNumber of Paging Destinations: Unicast (max. 8), Multicast (max. 191)Connector: RJ45 connectorVoice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertion

N-8000CO(CE/CU version) C/O Interface Unit

Audio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lamp, Line connection indication lampOther: Firmware update function, System data hold function, Reset switch (front panel)Setting Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Pre-coated steel plate, black, 30% gloss Dimensions: 210 (W) × 44.3 (H) × 267 (D)mmWeight: 1.7kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Mini-clamp plug (2 pins) × 2, Plastic foot × 4, Screw for fitting plastic foot x 4Option: Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000CO unit)/MB-15B-J (for rack mounting two N-8000CO units), Wall mounting bracket: YC-850

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

2726

N-8000RS(CE/CU version) Sub-Station Interface Unit

Power Source: 220 – 240V AC (CE version)/120V AC (CU version), 50/60HzPower Consumption: 32W(at rated), 38W(max.) (CE version)/26W(at rated), 32W(max.)(CU version)Interface Section for stationNumber of lines: 16 linesNumber of speech link: 1 link Transmission System: Analog basebandTransmission Range: 500m ø0.5mm (AGW24), 800m/ø0.65mm (AGW21), 1300m/ø0.9mm (AGW19)Speech Method: Half-duplex conversation by way of voice switchConnecter: Removable terminal block (3 pins)Wiring method: Two-core shielded cableAudio Output: Max. 1W/line (conversation), Max. 0.5W/line (paging)Feeding Voltage/Current: 22V DC, Max. 30mAControl Signal: Call in button detection, privacy button detection, hook detectionNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: 0, *Reception onlyConnector: RJ45 connector

Power Source: 220 – 240V AC (CE version)/120V AC (CU version), 50/60HzPower Consumption: 40W(at rated), 50W(max.) (CE version)/35W(at rated), 45W(max.)(CU version)Interface Section for stationNumber of lines: 16 linesNumber of speech link: 2 link Transmission System: Analog basebandTransmission Range: 500m ø0.5mm (AGW24), 800m/ø0.65mm (AGW21), 1300m/ø0.9mm (AGW19)Speech Method: Half-duplex conversation by way of voice switchConnecter: Removable terminal block (3 pins)Wiring method: Two-core shielded cableAudio Output: Max. 1W/line (conversation), Max. 0.5W/line (paging)Feeding Voltage/Current: 22V DC, Max. 30mAControl Signal: Call in button detection, privacy button detection, hook detectionNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: 0, *Reception onlyConnector: RJ45 connectorVoice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bit


Voice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lampOther: Firmware update function, System data hold function, Reset switch (front panel), Forced air coolingSetting Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: 90% or less RH (no condensation)Finish: Pre-coated steel plate, black, 30% gloss Dimensions: 420 (W) × 44.3 (H) × 325.5 (D)mmWeight: 3.9kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Removable terminal plug (3 pins) × 16, Plastic foot × 4, Screw for fitting plastic foot x 4, Rack mounting bracket × 2, Screw for rack mounting × 4, Wall mounting bracket × 2, Screw for mounting bracket × 8, Screw for rack mounting × 4Option: Wall mounting bracket: YC-850

Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lampOther: Firmware update function, System data hold function, Reset switch (front panel), Forced air coolingSetting Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: 90% or less RH (no condensation)Finish: Pre-coated steel plate, black, 30% gloss Dimensions: 420 (W) × 44.3 (H) × 325.5 (D)mmWeight: 3.9kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Removable terminal plug (3 pins) × 16, Plastic foot × 4, Screw for fitting plastic foot x 4, Rack mounting bracket × 2, Screw for rack mounting × 4, Wall mounting bracket × 2, Screw for mounting bracket × 8, Screw for rack mounting × 4Option: Wall mounting bracket: YC-850


Power Source: 220 – 240V AC (CE version)/120V AC (CU version), 50/60HzPower Consumption: 30W(at rated), 46W(max.) (CE version)/35W(at rated), 50W(max.)(CU version)Interface Section for stationNumber of lines: 16 linesNumber of speech link: 2 link Transmission System: Analog basebandTransmission Range: 1000m ø0.5mm (AGW24), 1500m/ø0.65mm (AGW21), 2000m/ø0.9mm (AGW19)Speech Method: Half-duplex conversation by way of voice switch (Hand-free), Full-duplex (Handset)Connecter: Removable terminal block (4 pins)Wiring method: 2 sets of twisted pair cableAudio Output: Max. 1W/line (conversation), Max. 0.5W/line (paging)Feeding Voltage/Current: 22V DC, Max. 30mAControl Signal: Call in button detection, privacy button detection, hook detectionNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: 0, *Reception onlyConnector: RJ45 connector

Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Network LNK/ACT indication, Status Lamp, Power-on indication lampOther: Firmware update function, System data hold function, Reset switch (front panel), Forced air coolingSetting Method: Rack, Desk, Surface mountOperating Temperature: 0°C to +40°COperating Humidity: 90% or less RH (no condensation)Finish: Pre-coated steel plate, black, 30% gloss Dimensions: 420 (W) × 44.3 (H) × 325.5 (D)mmWeight: 4kgAccessory: AC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Removable terminal plug (4 pins) × 16, Plastic foot × 4, Screw for fitting plastic foot x 4, Rack mounting bracket × 2, Screw for rack mounting × 4, Wall mounting bracket × 2, Screw for mounting bracket × 8, Screw for rack mounting × 4Option: Wall mounting bracket: YC-850

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

27

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

IP Master Stations

N-8600MSIP Multifunctional Master Station

Power Source: Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))Power Consumption: Use of the AC adapter (12V DC: 2.5W (station only))Use of the PoE (48V DC): 3WSpeech Method: Hands-free or handset conversationAudio Frequency Range: 300Hz – 7kHzHands-free: Speaker: 5.7cm cone-type, maximum output 0.5W, 8Ω/Mic.: Omni-directional electret condenser microphoneHandset: Receive path: Dynamic type/Send path: Electret condenser microphoneHands Terminal: Speaker: 150Ω, ø3.5mm mini jackMicrophone: -49dB*, ø3.5mm mini jack External Speaker Terminal: Maximum output 0.5W, 8Ω, screwless connector (2 pins)Network SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: Unicast (max. 16), Multicast (max. 191)

Connector: LAN: RJ45 connector (PoE compatible)Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Display: LCD alphanumeric characters (16 characters × 2 lines)Indication: Status lampInstallation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.)Operating Temperature: 0°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Body, Handset: ABS resin, grayDimensions: 148 (W) × 208 (H) × 70.5 (D)mm (excluding a curl cord section)Weight: 770gAccessory: CD (for PC setting, maintenance use) × 1Option: Wall mounting bracket: YC-280/AC adapter: AD-1210P, AD-1215P

*0dB = 1V

N-8510MSIP Standard Master Station

Power Source: Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))Power Consumption: 4.2W (at rated), 6W (max.)Speech Method: Hands-free or handset conversationAudio Frequency Range: 300Hz – 7kHzHands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneHandset: Receive path: Dynamic type/Send path: Electret condenser microphoneExternal Control Input Terminal: No-voltage contact input, open voltage: 5V DC, short-circuit current: 5mA or less, screwless connector (2P)Network SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: Unicast (max.16), Multicast (max. 191)Connector: LAN: RJ45 connector (PoE compatible)/

PC: RJ45 connector (not-compatible with PoE)Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Status lampInstallation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.)Operating Temperature: 0°C to +40°COperating Humidity: 90% or less RH (no condensation)Finish: Body, Handset: ABS resin, grayDimensions: 148 (W) × 208 (H) × 70.5 (D)mm (excluding a curl cord section)Weight: 740gAccessory: CD (for PC setting, maintenance use) × 1Option: Wall mounting bracket: YC-280/AC adapter: AD-1210P, AD-1215P*0dB = 1V

N-8640DSIP Door Station

Power Source: Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))Power Consumption: Use of the AC adapter (12V DC: 3.5W (station only))Use of the PoE (48V DC): 5WSpeech Method: Hands-free conversationAudio Frequency Range: 300Hz – 7kHzHands-free: Speaker: maximum output 0.5W, 8Ω, 5.7cm cone-typeMic.: Omni-directional electret condenser microphoneContact Input: 1 channel, no-voltage make contact input, open circuit voltage: 5V DC. short circuit current: 10mA or less, unterminated endsContact Output: Open collector output, 4 channels, withstand voltage: 30V DC, control current: Max. 50mA (4 output 1COMMON), unterminated endsRelay contact output, 1 channel, withstand voltage: 30V DC, control current: 500mA, unterminated endsExternal Speaker Terminal: Maximum output 0.5W, 8Ω, unterminated endsNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: 0, *Reception onlyConnector: LAN: RJ45 connector (PoE compatible)

Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Status lampInstallation Method: Flush-mount/Surface-mountOperating Temperature: -10°C to +50°COperating Humidity: 90% RH or less (no condensation)Housing Protection: BS EN62262: 2002: IK02 equivalentDust/Water Protection: IP65 (Note that panel edges must be sealed at installation)Finish: Panel: Stainless steel (SUS304), hairline/Call button: MetalDimensions: 115 (W) × 162 (H) × 58.5 (D)mmWeight: 780gAccessory: Box mounting screw (No.6-32UNC x 18) × 4,Box mounting screw( M4 x 20) x 4, Waterproof washer × 4, LAN coupler × 1Option: AC adapter: AD-1210P, AD-1215PApplicable Box (option): For wall mount: Wall mount Box YS-13AFor flush-mount: 3-gang electrical box or Back Box YC-150

*0dB = 1V

Stations

N-8650DSIP Indoor Station

Power Source: Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))Power Consumption: Use of the AC adapter (12V DC: 3.5W (station only))Use of the PoE (48V DC): 5WSpeech Method: Hands-free conversationAudio Frequency Range: 300Hz – 7kHzHands-free: Speaker: maximum output 0.5W, 8Ω, 5.7cm cone-typeMic.: Omni-directional electret condenser microphoneContact Input: 1 channel, no-voltage make contact input, open circuit voltage: 5V DC. short circuit current: 10mA or less, unterminated endsContact Output: Open collector output, 4 channels, withstand voltage: 30V DC, control current: Max. 50mA (4 output 1COMMON), unterminated endsRelay contact output, 1 channel, withstand voltage: 30V DC, control current: 500mA, unterminated endsExternal Speaker Terminal: Maximum output 0.5W, 8Ω, unterminated endsNetwork SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP

Audio Packet Transmission System: Unicast/Multicast Number of paging destinations: 0, *Reception onlyConnector: LAN: RJ45 connector (PoE compatible)Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Indication: Status lamp (built in the Call button)Installation Method: Flush-mount/Surface-mountOperating Temperature: -10°C to +50°COperating Humidity: 90% RH or less (no condensation)Housing Protection: BS EN62262: 2002: IK02 equivalentFinish: ABS resin, dark grayDimensions: 117.2 (W) × 162 (H) × 60 (D)mmWeight: 400gAccessory: Box mounting screw (No.6-32UNC x 18) × 4,Box mounting screw( M4 x 20) x 4, LAN coupler × 1Option: AC adapter: AD-1210P, AD-1215PApplicable Box (option): For wall mount: Wall mount Box YS-13AFor flush-mount: 3-gang electrical box or Back Box YC-150

*0dB = 1V

2928

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

2-Wire Type Stations

N-8000MSMultifunctional Master Station

N-8010MSStandard Master Station

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (at rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free or handset conversationAudio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneHandset: Receive path: Dynamic type/Send path: Electret condenser microphoneIndication: Status lampLine Connecting Terminal: RJ-11 modular jack

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (at rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free or handset conversationAudio Frequency Range: 300Hz – 7,kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneHandset: Receive path: Dynamic type/Send path: Electret condenser microphoneDisplay: LCD: Alphanumeric characters (16 characters × 2 lines)

Line Connecting Terminal: RJ-11 modular jackHandset Terminal: Speaker: 3mW, 32Ω/ Microphone: -49dB*, ø3.5mm mini jackExternal Speaker Terminal: 0.6W, 8 ohms, screwless connector (2 pins)Installation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Body, Handset: ABS resin, grayDimensions: 148 (W) × 208 (H) × 70.5 (D)mm (excluding a curl cord section)Weight: 800gAccessory: Connecting cord (3m) × 1Option: Wall mounting bracket: YC-280

*0dB = 1V

Installation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Body/Handset: ABS resin, grayDimensions: 148 (W) × 208 (H) × 70.5 (D)mm (excluding a curl cord section)Weight: 700gAccessory: Connecting cord (3m) × 1Option: Wall mounting bracket: YC-280

*0dB = 1V

N-8011MSStandard Hands-free Master Station

N-8020MSIndustrial-Use Master Station

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (at rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free or handset conversationAudio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneHandset: Receive path: Dynamic type/Send path: Electret condenser microphoneDial-in Contact Output: Open collector output (The contacts have polarity.)/Withstand voltage: Max. 30V DC, Control current: Max. 50mA, screwless connector (2 pins)

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (at rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free conversationAudio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneIndication: Status lamp

Line Connecting Terminal: RJ-11 modular jackInstallation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-290.)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Body: ABS resin, grayDimensions: 92 (W) × 195 (H) × 56.1 (D)mm Weight: 400gAccessory: Connecting cord (3m) × 1Option: Wall mounting bracket: YC-290

*0dB = 1V

Indication: Status lampLine Connecting Terminal: RJ-11 modular jackExternal Speaker Terminal: 0.6W, 8 ohms, screwless connector (2P)Installation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.)Operating Temperature: -10°C to +50°COperating Humidity: Under 90% RH (no condensation)Dust/Water Protection: IP54Finish: Body, Handset: ABS resin, grayDimensions: 170 (W) × 220 (H) × 97.8 (D)mm (excluding a curl cord and projection sections)Weight: 1kgAccessory: Rubber cap × 2Option: Wall mounting bracket: YC-280

*0dB = 1V

N-8640SBIP Door Station Board

Power Source: Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))Power Consumption: Use of the AC adapter (12V DC: 3.5W (station only))Use of the PoE (48V DC): 5WSpeech Method: Hands-free conversationAudio Frequency Range: 300Hz – 7kHzHands-free: Speaker: maximum output 0.5W, 8Ω, 5.7cm cone-typeMic.: Omni-directional electret condenser microphoneContact Input: 1 channel, no-voltage make contact input, open circuit voltage: 5V DC. short circuit current: 10mA or less, unterminated endsContact Output: Open collector output, 4 channels, withstand voltage: 30V DC, control current: Max. 50mA (4 output 1COMMON), unterminated endsRelay contact output, 1 channel, withstand voltage: 30V DC, control current: 500mA, unterminated endsExternal Speaker Terminal: Maximum output 0.5W, 8Ω, unterminated ends

Network SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: 0, *Reception onlyConnector: LAN: RJ45 connector (PoE compatible)Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Operating Temperature: -10°C to +50°COperating Humidity: 90% RH or less (no condensation)Dimensions: 79 (W) × 134 (H) × 53 (D)mm (Complete assemblyof component parts)Weight: 350g (total weight)Option: AC adapter: AD-1210P, AD-1215P

Note: For the assembly procedure and operation panel design,refer to the instruction manual supplied with the unit.

29

Power Source: 48V DC (supplied from the IP network intercom exchange (option))Power Consumption: 1.8W (rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free conversationAudio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 1W, 8Ω, 3.5cm cone-typeMic.: Omni-directional electret condenser microphoneContact Output: Open collector output, withstand voltage: Max. 30V DC, control current: Max. 50mA, one shot: can be set from 1 to 9 sec, screw terminal (polarized)

Indication: Status lampLine Connecting Terminal: 2 wire, screw terminal (non-polar)Installation Method: Flush-mount/Surface-mountOperating Temperature: -10°C to +50°COperating Humidity: Under 90% RH (no condensation)Housing Protection: BS EN62262: 2002: IK02 equivalentDust/Water Protection: IP54 (Note that panel edges must be sealed at installation)Finish: Panel: Stainless steel (SUS304), hairline/Call button: MetalDimensions: 115 (W) × 162 (H) × 55.1 (D)mmWeight: 680gAccessory: Box mounting screw (No.6-32UNC × 18) × 4, Box mounting screw (M4 × 25) × 4, Ferrite clamp × 1Applicable Box (option): For flush-mount: 3-gang electrical box or Back Box YC-150/For wall mount: Wall mount Box YS-13A

*0dB = 1V

N-8050DSDoor Station

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

N-8031MSFlush-Mount Hands-Free Master Station

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free conversation (Handset conversation can be established in conjunction with the RS-191(option))Audio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneIndication: Status lampLine Connecting Terminal: Pin header (2 pins)External Dial Input: No-voltage make contact input, screwless connector (5 pins)Installation Method: Flush-mount/Surface-mountOperating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Panel: Stainless steel (SUS304), hairlineDimensions: 115 (W) × 254 (H) × 54.6 (D)mm

Weight: 850gAccessory: Box mounting screw (No.6-32UNC × 18) × 4, Box mounting screw (M4 × 25) × 4, Removable terminal plug (2 pins, preinstalled on the unit) × 1, Handset jumper (8 pins, preinstalled on the unit) × 1, Ferrite clamp × 1Option: For flush-mount: Back Box YC-241/Wall surface-mount: Wall mount Box YC-251

*0dB = 1V

RS-191Option Handset

Handset Receiver: Dynamic typeHandset Transmitter: Electret condenser typeOperating Temperatures: 0°C to +40°C (temperature range not to freeze the speaker and switch)Finish: ABS resin, pale whiteDimensions: 116 (W) × 220 (H) × 70 (D)mmWeight: 330gAccessory: Box mounting screw (No.6-32UNC × 18) × 4, Box mounting screw (M4 × 25) × 4

Power Source: 48V DC (supplied from the IP network intercom exchange)Power Consumption: 1.8W (rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free conversationAudio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-typeMic.: Omni-directional electret condenser microphoneIndication: Status lampLine Connecting Terminal: Pin header (2 pins)

External Dial Input: No-voltage make contact input, screwless connector (5 pins)Installation Method: Flush-mount/Surface-mountOperating Temperature: -10°C to +40°COperating Humidity: 90% or less RH (no condensation)Dust/Water Protection: IP54 (Note that panel edges must be sealed at installation)Resistance to Environment: Passed our chemical-resistant testFinish: Panel: Stainless steel (SUS304), hairlineDimensions: 115 (W) × 254 (H) × 51 (D)mmWeight: 850gAccessory: Box mounting screw (M4 × 25) × 4, Acousticabsorbent × 1, Removable terminal plug (2 pins, preinstalled onthe unit) × 1Option: Back Box YC-841

*0dB = 1V

N-8033MSFlush-Mount Master Station

N-8031SBMaster Station Board

N-8050SBDoor Station Board

Power Source: 48V DC (supplied from the IP network intercom exchange (option))Power Consumption: 1.8W (rated), 2.4W (max.)Wiring Method: Non-polar one pair stranded wire systemTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free conversation Audio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 1W, 8Ω, 3.5cm cone-type/Mic. (accessory): Omni-directional electret condenser microphoneContact Output: Open collector output, withstand voltage: Max. 30V DC, control current: Max. 50mA, one shot: can be set from 1 to 9 sec, screw terminal (polarized)

Power Source: 48V DC (supplied from the network intercom exchange (option))Power Consumption: 1.8W (rated), 2.4W (max.)Wiring Method: Non-polar one pair stranded wire systemTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free conversation (Handset conversation can be established in conjunction with the RS-191(option))Audio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic (accessory): Omni-directional electret condenser microphoneLine Connecting Terminal: Pin header (2 pins)Status Indicator LED Connecting Terminal: Solderless connector (2 pins, male), voltage: 5V, maximum load current: 5mA

Dial Input: Solderless connector (10 pins, male), open voltage: 3.3V DC, short-circuit current: 1mAExternal Dial Input: No-voltage make contact input, open voltage: 5V DC, short-circuit current: 1mA, screwless connector (5 pins)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Dimensions: 70 (W) × 185 (H) × 20.6 (D)mmWeight: 205g (including accessories)Accessory: Removable terminal plug (2 pins, preinstalled on the unit) × 1, Handset jumper (8 pins, preinstalled on the unit) × 1, Ferrite clamp × 1, Hands-free speaker (with connection cord) × 1, Hands-free microphone (with connection cord) × 1Option: Handset: RS-191

*0dB = 1V

Line Connecting Terminal: 2 wire, screw terminal (non-polar)Status Indicator LED Connecting Terminal: Solderless connector (5 pins, male), voltage: 5V, maximum load current: 4.1mACall Button Connecting Terminal: Solderless connector (5 pins, male), open voltage: 3.3V DC, short-circuit current: 1.5mA Operating Temperature: -10°C to +50°COperating Humidity: Under 90% RH (no condensation)Dimensions: 67 (W) × 128.3 (H) × 26 (D)mmWeight: 100g (including accessories)Accessory: Hands-free speaker (with connection cord) × 1, Hands-free microphone (with connection cord) × 1

*0dB = 1V

30

Call-In Switch: MomentaryPrivacy Switch: LatchingIndicator: When called: Call LED (red) flashingIn conversation: Call LED (red) litIn privacy: Privacy LED (red) litWiring: Two-core shielded cableTransmission Range: 0.5km /ø0.5mm (AWG24),0.8km /ø0.65mm (AWG22),1.3km /ø0.9mm (AWG19)Operating Temperatures: 0°C to +40°CFinish: Panel: Stainless steel, hairlineCall-In Switch: Resin, redPrivacy Switch: Resin, whiteDimensions: 70 (W) × 115 (H) × 28.6 (D)mmWeight: 80gAccessory: Mounting bracket × 1, Bracket mounting screw (No.6-32UNC) × 18) × 2, Box mounting screw (No.6-32UNC × 30) × 2, Box mounting screw (M4 × 30) × 2Applicable Box: Flush-mount box: YC-801(option) Wall-mount box: YC-802(option)

Handset Receiver: Dynamic typeHandset Transmitter: Electret condenser typeWiring: Two-core shielded cableHandset Receiver Volume Control: Side volume, Maximum attenuation level: 12 – 18dBOperating Temperatures: 0°C to +40°CFinish: ABS resin, pale whiteDimensions: 116 (W) × 220 (H) × 71 (D)mmWeight: 350gAccessory: Box mounting screw (No.6-32UNC × 18) × 4, Box mounting screw (M4 × 25) × 4Applicable Box: 2-gang electrical box: YC-302 (option)

RS-140Switch Panel

RS-141Option Handset

RS-142Switch Board

RS-143Switch Panel

RS-144Switch Panel

Call-in Switch Wiring: 4 cables (for 2 momentary switches)Wiring: Two-core shielded cableTransmission Range: 0.5km /ø0.5mm (AWG24)0.8km /ø0.65mm (AWG22)1.3km /ø0.9mm (AWG19)Operating Temperatures: 0°C to +40°CWeight: 30g

Call-In Switch: MomentaryWiring: Two-core shielded cableTransmission Range: 0.5km /ø0.5mm (AWG24)0.8km /ø0.65mm (AWG22)1.3km /ø0.9mm (AWG19)Operating Temperatures: 0°C to +40°CFinish: Panel: Stainless steel, hairlineCall-in Switch: Resin, red Dimensions: 70 (W) × 115 (H) × 28.6 (D)mmWeight: 80gAccessory: Mounting bracket × 1, Bracket mounting screw (No.6-32UNC) × 18) × 2, Box mounting screw (No.6-32UNC × 30) × 2, Box mounting screw (M4 × 30) × 2Applicable Box: Flush-mount box: YC-801(option) Wall-mount box: YC-802(option)

Call-In Switch: Momentary (EMERGENCY, NORMAL)Wiring: Two-core shielded cableTransmission Range: 0.5km /ø0.5mm (AWG24)0.8km /ø0.65mm (AWG22)1.3km /ø0.9mm (AWG19)Operating Temperatures: 0°C to +40°CFinish: Panel: Stainless steel, hairlineCall-In Switch: Resin, redPrivacy Switch (normal): Resin, whiteDimensions: 70 (W) × 115 (H) × 28.6 (D)mmWeight: 80gAccessory: Mounting bracket × 1, Bracket mounting screw (No.6-32UNC) × 18) × 2, Box mounting screw (No.6-32UNC × 30) × 2, Box mounting screw (M4 × 30) × 2Applicable Box: Flush-mount box: YC-801(option) Wall-mount box: YC-802(option)

RS-150Substation (Indoor type)

Rated Input: 1WRated Impedance: 625Ω (1W/25V)Internal Speaker: 4cm cone-typeWiring: Two-core shielded cableTransmission Range: 0.5km /ø0.5mm (AWG24)0.8km /ø0.65mm (AWG22)1.3km /ø0.9mm (AWG19)Operating Temperatures: -10°C to +50°C (Temperature range not to freeze the speaker and switch)Finish: Panel: Stainless steel, hairline/Call button: ResinDimensions: 120 (W) × 120 (H) × 48.5 (D)mmWeight: 410gAccessory: Box mounting screw (No.6-32UNC × 18) × 4, Box mounting screw (M4 × 25) × 4

RS-160Substation (Indoor Vandal-Resistant type)

Rated Input: 1WRated Impedance: 625Ω (1W/25V)Internal Speaker: 4cm cone-typeWiring: Two-core shielded cableTransmission Range: 0.5km /ø0.5mm (AWG24)0.8km /ø0.65mm (AWG22)1.3km /ø0.9mm (AWG19)Operating Temperatures: -10°C to +50°C (Temperature range not to freeze the speaker and switch)Finish: Panel: Stainless steel, hairline/Call button: MetalDimensions: 120 (W) × 120 (H) × 57.5 (D)mmWeight: 540gAccessory: Box mounting screw (No.6-32UNC × 8) × 4, Box mounting screw (M4 × 25) × 4

2-Core Shielded Cable Type Stations

RS-170Substation (Outdoor Vandal-Resistant type)

Rated Input: 1WRated Impedance: 625Ω (1W/25V)Internal Speaker: 4cm cone-typeWiring: Two-core shielded cableTransmission Range: 0.5km /ø0.5mm (AWG24)0.8km /ø0.65mm (AWG22)1.3km /ø0.9mm (AWG19)Operating Temperatures: -10°C to +50°C (Temperature range not to freeze the speaker and switch)Finish: Panel: Stainless steel, hairline/Call button: Metal/Printed circuit board: weather-resistant coatingDimensions: 120 (W) × 120 (H) × 57.5 (D)mmWeight: 540gAccessory: Box mounting screw (No.6-32UNC × 8) × 4, Box mounting screw (M4 × 25) × 4

RS-180Substation (Outdoor Vandal-Resistant type with Control Output)

Rated Input: 1WRated Impedance: 625Ω (1W/25V)Internal Speaker: 4cm cone-typeControl Output: Open collector output: 30V DC, 30mA (The open collector output is kept turned on till the con-versation is finished after the call button was pressed.)Wiring: Two-core shielded cableTransmission Range: 0.5km /ø0.5mm (AWG24)0.8km /ø0.65mm (AWG22)1.3km /ø0.9mm (AWG19)Operating Temperatures: -10°C to +50°C (Temperature range not to freeze the speaker and switch)Finish: Panel: Stainless steel, hairline/Call button: Metal/Printed circuit board: weather-resistant coatingDimensions: 120 (W) × 120 (H) × 58.5 (D)mmWeight: 570gAccessory: Box mounting screw (No.6-32UNC × 8) × 4, Box mounting screw (M4 × 25) × 4

Maxmum cable distance (RS-150/160/170/180)Cable Type

Distance

AWG24 AWG22 AWG20 (ø0.52mm) (ø0.65mm) (ø0.82mm) 0.5km 0.8km 1.3km

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

2928

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

2-Wire Type Stations

N-8000MSMultifunctional Master Station

N-8010MSStandard Master Station

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (at rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free or handset conversationAudio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneHandset: Receive path: Dynamic type/Send path: Electret condenser microphoneIndication: Status lampLine Connecting Terminal: RJ-11 modular jack

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (at rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free or handset conversationAudio Frequency Range: 300Hz – 7,kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneHandset: Receive path: Dynamic type/Send path: Electret condenser microphoneDisplay: LCD: Alphanumeric characters (16 characters × 2 lines)

Line Connecting Terminal: RJ-11 modular jackHandset Terminal: Speaker: 3mW, 32Ω/ Microphone: -49dB*, ø3.5mm mini jackExternal Speaker Terminal: 0.6W, 8 ohms, screwless connector (2 pins)Installation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Body, Handset: ABS resin, grayDimensions: 148 (W) × 208 (H) × 70.5 (D)mm (excluding a curl cord section)Weight: 800gAccessory: Connecting cord (3m) × 1Option: Wall mounting bracket: YC-280

*0dB = 1V

Installation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Body/Handset: ABS resin, grayDimensions: 148 (W) × 208 (H) × 70.5 (D)mm (excluding a curl cord section)Weight: 700gAccessory: Connecting cord (3m) × 1Option: Wall mounting bracket: YC-280

*0dB = 1V

N-8011MSStandard Hands-free Master Station

N-8020MSIndustrial-Use Master Station

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (at rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free or handset conversationAudio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneHandset: Receive path: Dynamic type/Send path: Electret condenser microphoneDial-in Contact Output: Open collector output (The contacts have polarity.)/Withstand voltage: Max. 30V DC, Control current: Max. 50mA, screwless connector (2 pins)

Power Source: 48V DC (supplied from the network intercom exchange)Power Consumption: 1.8W (at rated), 2.4W (max.)Wiring Method: 1 set of twisted pair cableTransmission System: 2 wire 160kbps echo canceller transmission systemSignal Level: Under 0dB*Speech Method: Hands-free conversationAudio Frequency Range: 300Hz – 7kHzTransmission Range: Max. 1500m (ø0.65mm. Loop resistance 170Ω)Hands-free: Speaker: 0.6W, 8Ω, 5.7cm cone-type/Mic.: Omni-directional electret condenser microphoneIndication: Status lamp

Line Connecting Terminal: RJ-11 modular jackInstallation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-290.)Operating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Body: ABS resin, grayDimensions: 92 (W) × 195 (H) × 56.1 (D)mm Weight: 400gAccessory: Connecting cord (3m) × 1Option: Wall mounting bracket: YC-290

*0dB = 1V

Indication: Status lampLine Connecting Terminal: RJ-11 modular jackExternal Speaker Terminal: 0.6W, 8 ohms, screwless connector (2P)Installation Method: Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.)Operating Temperature: -10°C to +50°COperating Humidity: Under 90% RH (no condensation)Dust/Water Protection: IP54Finish: Body, Handset: ABS resin, grayDimensions: 170 (W) × 220 (H) × 97.8 (D)mm (excluding a curl cord and projection sections)Weight: 1kgAccessory: Rubber cap × 2Option: Wall mounting bracket: YC-280

*0dB = 1V

N-8640SBIP Door Station Board

Power Source: Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))Power Consumption: Use of the AC adapter (12V DC: 3.5W (station only))Use of the PoE (48V DC): 5WSpeech Method: Hands-free conversationAudio Frequency Range: 300Hz – 7kHzHands-free: Speaker: maximum output 0.5W, 8Ω, 5.7cm cone-typeMic.: Omni-directional electret condenser microphoneContact Input: 1 channel, no-voltage make contact input, open circuit voltage: 5V DC. short circuit current: 10mA or less, unterminated endsContact Output: Open collector output, 4 channels, withstand voltage: 30V DC, control current: Max. 50mA (4 output 1COMMON), unterminated endsRelay contact output, 1 channel, withstand voltage: 30V DC, control current: 500mA, unterminated endsExternal Speaker Terminal: Maximum output 0.5W, 8Ω, unterminated ends

Network SectionNetwork I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)Network Protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPAudio Packet Transmission System: Unicast/Multicast Number of paging destinations: 0, *Reception onlyConnector: LAN: RJ45 connector (PoE compatible)Voice Sampling Frequency: 16kHz, 8kHz (Controllable on the software)Quantifying Bit Number: 16-bitVoice Encoding Method: Sub-band ADPCM, CryptosystemVoice Packet Loss Recovery: Silence insertionAudio Delay Time: 80ms, 320ms (Controllable on the software)Operating Temperature: -10°C to +50°COperating Humidity: 90% RH or less (no condensation)Dimensions: 79 (W) × 134 (H) × 53 (D)mm (Complete assemblyof component parts)Weight: 350g (total weight)Option: AC adapter: AD-1210P, AD-1215P

Note: For the assembly procedure and operation panel design,refer to the instruction manual supplied with the unit.

32

YC-280Wall Mounting Bracketsfor N-8000MS/8010MS/8020MS/8410MS, N-8500MS/8510MS/8600MS.

YC-290Wall Mounting Bracketsfor N-8011MS.

E-7000TBTerminal Board

YC-251Surface Mount Back Boxfor N-8031MS.

YC-241Flush Mount Back Boxfor N-8031MS.

YS-13ASurface Mount Back Boxfor N-8050DS, N-8540DS, B-8640DS and N-8650DS.

YC-150Flush Mount Back Boxfor N-8050DS/8540DS/8640DS/8650DS.

YC-3022-Gang Electrical Boxfor RS-150/RS-160/170/RS-180/RS-190

Quantity Packed per Display Carton: 10 piecesFinish: SPHT, MFZn4 (glazed chromate)Dimensions: Outlet box: 102 (W) × 102 (H) × 44 (D)mm/Cover: 106 (W) × 106 (H) × 13 (D)mmWeight: 370g

YC-801Flush Mount Back Boxfor RS-140/143/144.

YC-802Surface Mount Back Boxfor RS-140/43/144.

Finish: Zinc-platingDimensions: 163.5 (W) × 114.5(H) × 55 (D)mm

Line Capacity: 80 (40 lines)Line Connection Terminal: Clip terminalFinish: Panel: Surface-treated steel plate, black, 30% glossDimensions: 482 (W) × 132.6 (H) × 108.8 (D)mmWeight: 2.5kgAccessory: Rack mounting screw × 4, Fiber washer × 4, Name plate × 4, Cord clamp × 6

Finish: Surface-treated steel plate, gray, paintDimensions: 100(W) × 140(H) × 31.8(D)mm

Finish: Surface-treated steel plate, gray, paintDimensions: 64(W) × 131.5(H) × 31.8(D)mm

Finish: Colored chrome paintingDimensions: 276(W) × 119(H) × 67(D)mm

Finish: Surface-treated steel plate, whiteDimensions: 124 (W) × 258.5(H) × 50.5(D)mm

Finish: Zinc-platingDimensions: 184 (W) × 119(H) × 57(D)mm

Finish: Surface-treated steel plate, black, 30% glossDimensions: 451 (W) × 220 (H) × 10(D)mm

Finish: Colored chrome paintingDimensions: 72(W) × 119(H) × 57(D)mm

Finish: Surface-treated steel plate, whiteDimensions: 75(W) × 124(H) × 50.5(D)mm

YC-850Wall Mounting Bracketfor N-8000RS, N-8000DI, N-8000AF, N-8000CO, N-8000AL, N-8010RS, N-8400RS,

AD-1210P/AD-1215P AC Adapterfor N-8500MS. N-8510MS, N-8540DS, N-8600MS, N-8640DS, N-8650DS and N-8640SB.

Power Req.: AD-1210P; 230V AC, 50Hz AD-1215P; 100 – 240V AC, 50/60Hz Cord Length: 1.8m

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

YC-281Flush Mount Back Boxfor N-8033MS.

Finish: Surface-treated steel plate whiteDimensions: 258(W) × 119(H) × 57(D)mm

YC-282Indoor Wall Mount Boxfor RS-150/160/170/180, RS-450/460/470/480/.

Finish: Stainless steel plate, off-whiteDimensions: 124(W) × 124(H) × 62(D)mm

YC-283Outdoor Wall Mount Boxfor RS-170/180/470/480.

Finish: Stainless steel plate, off-whiteDimensions: 124(W) × 124(H) × 62(D)mm

AD-1210P AD-1215P

System Image

33

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

RS-180 RS-140

Secretary's office

Emergency Switch Emergency Switch

N-8510MSN-8510MS

N-8000MS N-8000MS N-8010MS

Caretaker's room

HUB

School

Faculty room

N-8000RS

N-8000EX

SpeakerClassroom

RS-160 RS-160 RS-140RS-140 RS-143RS-143RS-143

Contact OutGate operation (open)

CCTV

N-8000AF

Amp

Broadcasting booth

Speaker

Revolving Light

Pilot Panel

N-8000MS

N-8031MSN-8033MS N-8020MS

N-8000MS

N-8000MS

N-8000DIN-8000DI

N-8050DS

N-8000EX

N-8000EX

N-8640DS

N-8000MI

Amp

Administartion office

Entrance

Production floor

Laboratory

HUBN-8000EX

Factory

N-8020MSSpeaker

Speaker

Monitor

Call SignalFoot Control SwitchSpeaker

CCTV

N-8640DS

CCTV

4-Channel Power Amplifiers

3534

Digital Power Amplifiers

DA-500F-HL (CU version)Power Source: 120V AC,50/60HzAmplification System: Class DPower Consumption: 480W (based on UL/CSA standards), 2600W (rated output 8Ω × 4)Input: 4 circuit, +4dB* (1.23V) (input level control in maximum position), 10 kΩ, electronically-balanced, removable terminal block (3 pins), XLR-3-31 type connector/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)/HPF ON/OFF switch (-6dB/oct, cut off frequency 50Hz)Rated Output: 4 channels: 500W × 4 (9.8Ω, 70V line), 550W x 4 (8Ω), 100W x 4 (4Ω)/ 2 channels (BRIDGE): 1000W x 2 (19.6Ω), 1100W x 2 (16Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20Hz – 20kHz (-2 dB, +1 dB): HPF OFF, 50Hz – 20kHz (-3 dB, +1 dB): HPF ONTHD: 0.1% (1kHz)/0.3% (20Hz – 20kHz): HPF OFF, 0.3% (100Hz – 20kHz): HPF ONProtection Circuit: Protection against excessive current flow due to over load, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (100°C or more), temperature rise at power supply heat sink (80°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)Control/Monitor: Control input: Power ON/OFF status of the individual channels photocoupler input, drive voltage: 9V DC (Min) – 14V (Max.), 12V (Typ)/Monitor output: Power ON/OFF status of the individual channels, Protection status of the individual channels, Fan operation statusphotocoupler open collector output, withstand voltage: 30V DC, control current: Under 12mA/Connector: RJ-45 connector x 2/Connection cable: Category 5 twisted pair cable for LAN (CAT5-UTP)/Maximum cable distance: 600mLED Indicator: Power (blue) × 1, Input (green) × 4, Output (yellow) × 4, Peak (red) × 4, Protect (red) × 4Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel: Aluminum, black, alumite/Case: Plated steel sheetDimensions: 482 (W) × 88.4 (H) × 404.2 (D) mmWeight: 8.8kgAccessory: Removable terminal plug (3 pins) × 4, Tamper-proof cap × 4Option: Matching transformer: MT-251H

*0dB = 0.775V rms

DA-550F (CU version)Power Source: 120V AC,50/60HzAmplification System: Class DPower Consumption: 480W (based on UL/CSA standards), 2800W (rated output 4Ω), 1650W (rated output 8Ω)Input: 4 circuit, +4dB* (1.23V) (input level control in maximum position), 10 kΩ, electronically-balanced, removable terminal block (3 pins)/XLR-3-31 type connector/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)Rated Output: 4 channels:550W × 4 (4Ω) , 350W × 4 (8Ω)/2 channels (BRIDGE): 1100W × 2 (8Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20Hz – 20kHz (-2 dB, +1 dB)THD: 0.1% (1kHz)/0.15% (20Hz – 20kHz)Protection Circuit: Protection against excessive current flow due to over load, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (100°C or more), temperature rise at power supply heat sink (80°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)Control/Monitor: Control input: Power ON/OFF status of the individual channels photocoupler input, drive voltage: 9V DC (Min) – 14V (Max.), 12V (Typ)/Monitor output: Power ON/OFF status of the individual channels, Protection status of the individual channels, Fan operation statusphotocoupler open collector output, withstand voltage: 30V DC, control current: Under 12mA/Connector: RJ-45 connector x 2/Connection cable: Category 5 twisted pair cable for LAN (CAT5-UTP)/Maximum cable distance: 600mLED Indicator: Power (blue) × 1, Input (green) × 4, Output (yellow) × 4, Peak (red) × 4, Protect (red) × 4Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel: Aluminum, black, alumite/Case: Plated steel sheetDimensions: 482 (W) × 88.4 (H) × 404.2 (D) mmWeight: 8.8kgAccessory: Removable terminal plug (3 pins) × 4, Tamper-proof cap × 4

*0dB = 0.775V rms

DA-500F-HL(CU version)DA-500FH(CE301 version)DA-550F (CE301/CU version)4-Channel Power Amplifier

DA-500FH (CE301 version)Power Source: 220 – 240V AC,50/60HzAmplification System: Class DPower Consumption: 460W (based on EN standards), 2350W (rated output 20Ω × 4)Input: 4 circuit, +4dB* (1.23V) (input level control in maximum position), 10 kΩ, electronically-balanced, removable terminal block (3 pins)/XLR-3-31 type connector/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)Rated Output: 4 channels: 500W × 4 (20Ω)/ M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 50Hz – 20kHz (-3 dB, +1 dB)THD: 0.1% (1kHz)/0.3% (100Hz – 20kHz)Protection Circuit: Protection against excessive current flow due to over load, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (100°C or more), temperature rise at power supply heat sink (80°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)Cooling: Forced air coolingControl/Monitor: Control input: Power ON/OFF status of the individual channels photocoupler input, drive voltage: 9V DC (Min) – 14V (Max.), 12V (Typ)/Monitor output: Power ON/OFF status of the individual channels, Protection status of the individual channels, Fan operation statusphotocoupler open collector output, withstand voltage: 30V DC, control current: 12mA or less/Connector: RJ-45 connector x 2/Connection cable: Shielded category 5 twisted pair cable for LAN (CAT5-STP)/Maximum cable distance: 600mLED Indicator: Power (blue) × 1, Input (green) × 4, Output (yellow) × 4, Peak (red) × 4, Protect (red) × 4Operating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel: Aluminum, black, alumite/Case: Plated steel sheetDimensions: 482 (W) × 88.4 (H) × 404.2 (D) mmWeight: 9kgAccessory: Power cord (2m) × 1, Removable terminal plug (3 pins) × 4, Rack mounting screw (with washer) × 4, Tamper-proof cap × 4Option: Matching transformer: MT-251H

*0dB = 0.775V rms

DA-550F (CE301 version)Power Source: 220 – 240V AC,50/60HzAmplification System: Class DPower Consumption: 480W (based on EN standards), 2750W (rated output 4Ω × 4), 1550W (rated output 8Ω × 4)Input: 4 circuit, +4dB* (1.23V) (input level control in maximum position), 10 kΩ, electronically-balanced, removable terminal block (3 pins)/XLR-3-31 type connector/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)Rated Output: 4 channels: 550W × 4 (4Ω) , 350W × 4 (8Ω)/2 channels (BRIDGE): 1100W × 2 (8Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20Hz – 20kHz (-2 dB, +1dB)THD: 0.1% (1kHz)/0.15% (20Hz – 20kHz)Protection Circuit: Protection against excessive current flow due to over load, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (100°C or more), temperature rise at power supply heat sink (80°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)Control/Monitor: Control input: Power ON/OFF status of the individual channels photocoupler input, drive voltage: 9V DC (Min) – 14V (Max.), 12V (Typ)/Monitor output: Power ON/OFF status of the individual channels, Protection status of the individual channels, Fan operation statusphotocoupler open collector output, withstand voltage: 30V DC, control current: Under 12mA/Connector: RJ-45 connector x 2/Connection cable: Shielded category 5 twisted pair cable for LAN (CAT5-STP)/Maximum cable distance: 600mLED Indicator: Power (blue) × 1, Input (green) × 4, Output (yellow) × 4, Peak (red) × 4, Protect (red) × 4Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel: Aluminum, black, alumite/Case: Plated steel sheetDimensions: 482 (W) × 88.4 (H) × 404.2 (D) mmWeight: 9kgAccessory: Power cord (2m) × 1, Removable terminal plug (3 pins) × 4, Rack mounting screw (with washer) × 4, Tamper-proof cap × 4

*0dB = 0.775V rms

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

35

DA-250F (CU version)Power Source: 120V AC, 50/60HzAmplification System: Class DPower Consumption: 200W (based on UL/CSA standards)1300W (rated output 4Ω × 4)850W (rated output 8Ω × 4)Input: 4 circuits, +4dB* (1.23V) (input level control in maximum position), 10kΩ, electronically-balanced, removable terminal block (3 pins)/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)Rated Output: 4 channels: 250W × 4 (4Ω), 170W × 4 ( 8Ω)/2 channels (BRIDGE): 500W × 2 (8Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20Hz – 20kHz (±1dB)THD: 0.1 % (1kHz)/0.3% (20Hz – 20kHz)Protection Circuit: Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, and heat sink temperature rise (110°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel; Aluminum, black, alumite/Case; Plated steel sheetDimensions: 482 (W) × 44 (H) × 401.8 (D)mm Weight: 6.6kgAccessory: Power cord (2m) x 1, Removable terminal plug (3 pins) × 4, Tamper-proof cap × 4 *0dB = 0.775Vrms

DA-250FH (CU version)Power Source: 120V AC, 50/60HzAmplification System: Class DPower Consumption: 200W (based on UL/CSA standards)1200W (rated output 19.6Ω × 4)Input: 4 circuits, +4dB* (1.23V) (input level control in maximum position), 10kΩ, electronically-balanced, removable terminal block (3 pins)/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)Rated Output: 4 channels: 250W × 4 (19.6Ω)/2 channels (BRIDGE): 500W × 2 (39.2Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20Hz – 20kHz (±1dB): HPF OFF/50Hz – 20kHz (-3dB, +0dB): HPF ON (selectable with the inner jumper)THD: 0.1 % (1kHz), 0.3% (20Hz – 20,000Hz): HPF OFF/0.1 % (1kHz), 0.3% (100Hz – 20kHz): HPF ONProtection Circuit: Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, and heat sink temperature rise (110°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel; Aluminum, black, alumite/Case; Plated steel sheetDimensions: 482 (W) × 44 (H) × 401.8 (D)mm Weight: 6.6kgAccessory: Power cord (2m) x 1, Removable terminal plug (3 pins) × 4, Tamper-proof cap × 4Option: Matching transformer: MT-251H *0dB = 0.775Vrms

DA-250F/DA-250FH (CE301/CU version)4-Channel Power Amplifier

DA-250FH (CE301 version)Power Source: 220 - 240V AC, 50/60HzAmplification System: Class DPower Consumption: 200W (based on EN standards)1150W (rated output 40Ω × 4)Input: 4 circuits, +4dB* (1.23V) (input level control in maximum position), 10kΩ, electronically-balanced, removable terminal block (3 pins)/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)Rated Output: 4 channels: 250W × 4 (100V line, 40Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 50Hz – 20kHz (-3dB, +0dB)THD: 0.1 % (1kHz)/0.3% (100Hz – 20kHz)Protection Circuit: Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, and heat sink temperature rise (110°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel; Aluminum, black, alumite/Case; Plated steel sheetDimensions: 482 (W) × 44 (H) × 401.8 (D)mm Weight: 6.8kgAccessory: Power cord (2m) x 1, Removable terminal plug (3 pins) × 4, Tamper-proof cap × 4, Rack mounting screw (with plain washer) × 4Option: Matching transformer: MT-251H *0dB = 0.775Vrms

DA-250F (CE301 version)Power Source: 220 - 240V AC, 50/60HzAmplification System: Class DPower Consumption: 200W (based on EN standards)1200W (rated output 4Ω × 4)800W (rated output 8Ω × 4)Input: 4 circuits, +4dB* (1.23V) (input level control in maximum position), 10kΩ, electronically-balanced, removable terminal block (3 pins)/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)Rated Output: 4 channels: 250W × 4 (4Ω), 170W × 4 (8Ω)/2 channels (BRIDGE): 500W × 2 (8Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20 – 20,000Hz (±1dB)THD: 0.1 % (1kHz)/0.3% (20 – 20,000Hz)Protection Circuit: Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, and heat sink temperature rise (110°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel; Aluminum, black, alumite/Case; Plated steel sheetDimensions: 482 (W) × 44 (H) × 401.8 (D)mm Weight: 6.8kgAccessory: Power cord (2m) x 1, Removable terminal plug (3 pins) × 4, Tamper-proof cap × 4, Rack mounting screw (with plain washer) × 4 *0dB = 0.775Vrms

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Optional Accessory

Dual-Channel Power Amplifiers

36

DA-250D (CU version)Power Source: 120V AC, 50/60HzAmplification System: Class DPower Consumption: 120W (based on UL/CSA standards)/650W (rated output 4Ω × 2)/420W (rated output 8Ω × 2)Input: 2 circuits, +4dB* (1.23V) (input level control in maximum position), 10kΩ, electronically-balanced, removable terminal block (3 pins), XLR-3-31 type connector/CH 1 mode ON/OFF switch (ON: PARALLEL, OFF: STEREO)Rated Output: 2 channels: 250W × 2 (4Ω), 170W × 2 (8Ω)/1 channel (BRIDGE): 500W × 1 (8Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20 – 20,000Hz (±1dB)THD: 0.1 % (1kHz)/0.3% (20 – 20,000Hz)Protection Circuit: Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (100°C or more), temperature rise inside the unit (80°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)LED Indicator: Power (blue) × 1, Input (green) × 2, Output (yellow) × 2, Peak (red) × 2, Protect (red) × 2Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel; Aluminum, black, alumite/Case; Plated steel sheetDimensions: 482 (W) × 44 (H) × 401.8 (D)mm Weight: 5kgAccessory: Power cord (2m) x 1, Removable terminal plug (3 pins) × 2, Temper-proof cap × 2 0dB=0.775Vrms

DA-250DH (CU version)Power Source: 120V AC, 50/60HzAmplification System: Class DPower Consumption: 120W (based on UL/CSA standards)580W (rated output 70V line, 19.6Ω × 2)Input: 2 circuits, +4dB* (1.23V) (input level control in maximum position), 10kΩ, electronically-balanced, removable terminal block (3 pins), XLR-3-31 type connector/CH 1 mode ON/OFF switch (ON: PARALLEL, OFF: STEREO)Rated Output: 2 channels: 250W × 2 (70V line, 19.6Ω)/1 channel (BRIDGE): 500W × 1 (140V line, 39.2Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20 – 20,000Hz (±1dB): HPF OFF/ 50 – 20,000Hz (-3dB, +1dB): HPF ON (selectable with the inner jumper)THD: 0.1 % (1kHz), 0.3% (20 – 20,000Hz): HPF OFF/ 0.1 % (1kHz), 0.3% (100 – 20,000Hz): HPF ON Protection Circuit: Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (100°C or more), temperature rise inside the unit (80°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)LED Indicator: Power (blue) × 1, Input (green) × 2, Output (yellow) × 2, Peak (red) × 2, Protect (red) × 2Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel; Aluminum, black, alumite/Case; Plated steel sheetDimensions: 482 (W) × 44 (H) × 401.8 (D)mm Weight: 5kgAccessory: Power cord (2m) x 1, Removable terminal plug (3 pins) × 2, Temper-proof cap × 2Option: Matching transformer: MT-251H 0dB=0.775Vrms

DA-250D/DA-250DH (CE301/CU version)Dual-Channel Power Amplifier

DA-250DH (CE301 version)Power Source: 220 - 240V AC, 50/60HzAmplification System: Class DPower Consumption: 120W (based on EN standards)580W (rated output 100V line, 4Ω × 2)Input: 2 circuits, +4dB* (1.23V) (input level control in maximum position), 10kΩ, electronically-balanced, removable terminal block (3 pins), XLR-3-31 type connector/CH 1 mode ON/OFF switch (ON: PARALLEL, OFF: STEREO)Rated Output: 2 channels: 250W × 2 (100V line, 40 Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 50Hz – 20kHz (-3dB, +1dB)THD: 0.1 % (1kHz)/0.3% (100Hz – 20kHz)Protection Circuit: Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (100°C or more), temperature rise inside the unit (80°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)LED Indicator: Power (blue) × 1, Input (green) × 2, Output (yellow) × 2, Peak (red) × 2, Protect (red) × 2Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel; Aluminum, black, alumite/Case; Plated steel sheetDimensions: 482 (W) × 44 (H) × 401.8 (D)mm Weight: 5.3kgAccessory: Power cord (2m) x 1, Removable terminal plug (3 pins) × 2, Temper-proof cap × 2, Rack mount screw (with washer) × 4Option: Matching transformer: MT-251H 0dB=0.775Vrms

DA-250D (CE301 version)Power Source: 220 - 240V AC, 50/60HzAmplification System: Class DPower Consumption: 120W (based on EN standards)620W (rated output 100V line, 4Ω × 2)400W (rated output 100V line, 8Ω × 2)Input: 2 circuits, +4dB* (1.23V) (input level control in maximum position), 10kΩ, electronically-balanced, removable terminal block (3 pins), XLR-3-31 type connector/CH 1 mode ON/OFF switch (ON: PARALLEL, OFF: STEREO)Rated Output: 2 channels: 250W × 2 (4Ω), 170W × 2 ( 8Ω)/1 channels (BRIDGE): 500W × 1 (8Ω)/M4 screw terminal, distance between barriers: 8.8mmFrequency Response: 20Hz – 20kHz (±1dB)THD: 0.1 % (1kHz)/0.3% (20Hz – 20kHz)Protection Circuit: Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (100°C or more), temperature rise inside the unit (80°C or more)S/N Ratio: 100dB (A-weighted)Crosstalk: 70dB (A-weighted)LED Indicator: Power (blue) × 1, Input (green) × 2, Output (yellow) × 2, Peak (red) × 2, Protect (red) × 2Cooling: Forced air coolingOperating Temperature: -10°C to +40°COperating Humidity: 90% RH or less (no condensation)Finish: Panel; Aluminum, black, alumite/Case; Plated steel sheetDimensions: 482 (W) × 44 (H) × 401.8 (D)mm Weight: 5.3kgAccessory: Power cord (2m) x 1, Removable terminal plug (3 pins) × 2, Temper-proof cap × 2, Rack mount screw (with washer) × 4 0dB=0.775Vrms

• For DA-250DH, DA-250FH, DA-500F-HL and DA-500FH

Capacity: 0W – 250WPrimary Side: 100V line, 70V lineSecondary Side: 100V line, 70V line, 50V line, 35V lineFrequency Response: 30 - 18,000Hz (+0dB, -3dB)Connection Terminal: M3 screw terminal, distance between barriers: 6.6mmDimensions: 108 (W) × 80 (H) × 122 (D)mmWeight: 2.4kg

MT-251HMatching Transformer

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Digital Matrix Mixer Power Amplifiers

9000 Series Modular Digital Matrix Amplifiers

3736

A-9060DHM2 (60W)A-9120DHM2 (120W)(CU version)Digital Matrix Mixer/Amplifier

Power Consumption: A-9060DHM2; 150W/A-9120DHM2: 250WRated Output: A-9060DHM2; 60W x 2 channels/A-9120DHM2: 120W x 2 channelsAudio Input: Max. 8 channels, modular construction (modules optional)/Power amplifier input 1, 2: 0 dB*, 10kΩ, RCA pin jackAudio Output: Preamplifier output 1, 2: 0dB*, 300Ω, unbalanced, RCA pin jack/Speaker output 1, 2: A-9060DHM2; 60W, 83Ω × 2, BTL output, removable terminal block (4 pins)/A-9120DHM2; 120W, 41Ω × 2, BTL output, removable terminal block (4 pins)Module Slot: Analog input (slot 1 – 8): 10kΩ, unbalanced/Digital input (slot 1 – 4): 24 bit/48kHz/MIX output (slot 1 – 8): -14dB*, 330Ω, unbalanced/Digital output (slot 5 – 7): 24 bit/48kHz/Power supply (slot 1 – 8): +24V, -24V, +6V DCDigital Audio Signal Reference Level: -20dBFSPower Bandwidth: 20Hz – 20kHz, 0.008% THDFrequency Response: Power amplifier section: 20Hz – 20kHz, +0, -1 dB/ Analog input module to speaker output: 20Hz – 20kHz +1, -3dBTHD: Power amplifier section: 0.0008% (22 kHz LPF, 1 kHz, rated power)/Analog input module to speaker output: 0.008% (22kHz LPF, 1kHz, rated power)S/N Ratio: At Input short, 20Hz – 20kHz, ALL FLAT or OFF setting/Output volume min.: 90dB (preamplifier output)/Output volume max.: 61dB (preamplifier output, input 1 volume: 0dB, other inputs: OFF)/Power amplifier section: 110dBCrosstalk: 64dB or more (at 20kHz)Tone Control: Bass: ±12dB (at 100Hz), Treble: ±12dB (at 10kHz)Parametric Equalizer: 10 bands, Frequency: 20Hz – 20Hz, 31 steps, Various range: ±12dB, Q: 0.3 - 5

Speaker Equalizer: 10 (setup software has 30 TOA speaker presets)High-pass Filter: -12dB/oct, Variable frequency range: 20Hz – 20kHz, 31 pointsLow-pass Filter: -12dB/oct, Variable frequency range: 20Hz – 20kHz, 31 pointsCompressor: Depth: 1 – 5Delay: 0 - 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2) Mix mode onlyScene/Event Memory: 32Operation Mode: Matrix mode/Mix mode (selector switch)Auxiliary Function: Key lock functionControl Input/Output: RS-232C*2, D-sub connector (9P, female)/Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: under 1mA, removable terminal block (14 pins)/Control output: 4 outputs, open collector output, withstand voltage: 27V DC, control current: 50mA, removable terminal block (14 pins)/Remote volume: 2 channels, connect a 10kΩ/linear taper variable resister or 0 – 10V DC, removable terminal block (14 pins)Operating Temperature: -10° to 40°CFinish: Panel: Aluminum, hair-line, black/Case: Surface-treated steel plate, black paintDimensions: 420 (W) × 107.6 (H) × 395 (D) mmWeight: A-9060DHM2; 9 kg/A-9120DHM2: 11 kgAccessory: Power cord (2m) × 1, Rack mounting bracket × 2, Bracket mounting screw × 4, Blank panel × 7, Blank panel mounting screw × 14, Removable terminal plug (4 pins) × 1, Removable terminal plug (14 pins) × 1, CD × 1

* 0 dB = 1 V*2 Allowing it to be controlled by a control system such as AMX and Crestron through RS-232C port. Note: AMX is a trademark of AMX Corporation. Crestron is a trademark of Crestron Electronics. Inc.

A-9060SM2 (60W)A-9120SM2 (120W)A-9240SHM2 (240W)(CU version)Digital Matrix Mixer/Amplifier

Power Consumption: A-9060SM2; 100W/A-9120SM2: 150W/A-9240SHM2; 250WRated Output: A-9060SM2; 60W/A-9120SM2; 120W/A-9240SHM2; 240WAudio Input: Max. 8 channels, modular construction (modules optional)/Power amplifier input 0 dB*, 10kΩ, RCA pin jackAudio Output: Preamplifier output 1: 0 dB*, 300Ω, unbalanced, RCA pin jackPreamplifier output 2: 0 dB*, 600Ω, balanced, removable terminal block (3 pins)/Speaker output: A-9060SM2: Removable terminal block (7 pins), (Direct) 60W, 4Ω, unbalanced, (Transformer) 60W, 8Ω 25V & 70V, balanced /A-9120SM2: Removable terminal block (7 pins), (Direct) 120W, 4Ω, unbalanced, (Transformer) 120W, 8 Ω 25V & 70V, balanced/A-9240SHM2: 240W, 21Ω, BTL output, removable terminal block (4 pins)Module Slot: Analog input(slot 1 – 8): -10dB*, 10kΩ, unbalanced/Digital input(slot 1 – 4): 24 bit/48k Hz/MIX output(slot 1 – 8): -14 dB*, 330Ω, unbalanced/Digital output(slot 5 – 7): 24 bit/48k Hz/Power supply(slot 1 – 8): +24V, -24V, +6V DCDigital Audio Signal Reference Level: -20 dBFSPower Bandwidth: A-9060SM2/A-9120SM2; (Direct) 20Hz – 20kHz, 0.02% THD, (Transformer) 50Hz – 20kHz, 0.5% THD/A-9240SHM2; 20Hz – 20kHz, 0.008% THDFrequency Response: Power amplifier section: 20Hz – 20kHz, +0, -1 dB/ Analog input module to speaker output: 20Hz – 20kHz +1, -3dBTHD: Analog input module to speaker output: 0.008% (22kHz LPF, 1kHz, rated power), Power amplifier section: A-9060SM2/A-9120SM2: 0.008% (22 kHz LPF, 1 kHz, rated power)/A-9240SHM2; 0.0008% (22 kHz LPE, 1 kHz, rated power)S/N Ratio: At Input short, 20Hz – 20kHz, ALL FLAT or OFF setting/Output volume min.: 90dB (preamplifier output)/Output volume max.: 61dB (preamplifier output, input 1 volume: 0 dB, other inputs: OFF)/Power amplifier section: 110dBCrosstalk: 64dB or more (at 20kHz)Tone Control: Bass: ±12dB (at 100Hz), Treble: ±12dB (at 10kHz)

Parametric EQ: 10 bands, Frequency: 20Hz – 20kHz, 31 points, Various range: ±12dB, Q: 0.3 - 5Speaker Equalizer: 10 (setup software has 30 TOA speaker presets)High-pass Filter: -12 dB/oct, Variable frequency range: 20Hz – 20kHz, 31 pointLow-pass Filter: -12dB/oct, Variable frequency range: 20Hz – 20kHz, 31 pointCompressor: Depth: 1 – 5Delay: 0 - 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2) Mix mode onlyScene/Event Memory: 32Auxiliary Function: Key lock functionControl Input/Output: RS-232C, D-sub connector (9P, female)/Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: under 1 mA, removable terminal block (14 pins)/Control output: 4 outputs, open collector output, withstand voltage: 27V DC, control current: 50 mA, removable terminal block (14 pins)/Remote volume: 2 channels, connect a 10k ohms/linear taper variable resister or 0 - 10 V DC, removable terminal block (14 pins)Operating Temperature: -10° to 40°CFinish: Panel: Aluminum, hair-line, black/Case: Surface-treated steel plate, black paintDimensions: A-9060SM2/A-9120SM2: 420 (W) × 107.6 (H) × 355 (D) mm/ A-9240SHM2: 420 (W) × 107.6 (H) × 395 (D) mmWeight (without modules): A-9060SM2/A-9240SHM2: 11 kg, A-9120SM2: 13kgAccessory: Power cord (2m) × 1, Rack mounting bracket × 2,Bracket mounting screw × 4, Blank panel × 7, Blank panel mounting screw × 14, Removable terminal plug (3 pins) × 1, Removable terminal plug (7 pins) × 1, Removable terminal plug (14 pins) × 1, CD × 1


P-9060DH (60W)P-9120DH (120W)(CU version)Power Amplifier

Power Source: 120V AC, 60HzPower Consumption: P-9060DH: 225W (rated output), 106W (UL60065)/P-9120DH: 404W (rated output), 208W (UL60065)Output: P-9060DH: Speaker output CH 1, CH 2: 60W, 83Ω x 2, BTL output (70V line), M4 screw terminal, distance between barriers: 9mm/P-9120DH: Speaker output CH 1, CH 2: 120W, 41Ω x 2, BTL output (70V line), M4 screw terminal, distance between barriers: 9mmInput: CH 1, CH 2 input: -20dB* or 0dB* (switchable), 10kΩ, electronically-balanced, removable terminal block/CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)Power Band Width: 20 – 20,000Hz, 0.08% T.H.D.Frequency Response: 20 – 20,000Hz (+1, -3dB)S/N ratio: At Input short, 20 – 20,000Hz, Input level switch in 0dB* position/Output volume min.: 105dB, Output volume max.: 97dBTHD: 0.008% (22kHz LPF, 1kHz, rated output, input level switch in 0dB* position)

Function: Output disconnected for approx. 5s after switching power on Air Cooling: Forced air cooling (Fan speed: varies depending on the temperature)Operating Temperature: -10°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel: Aluminum, hair-line, blackCase: SECC, black paintDimensions: 420 (W) × 107.6 (H) × 406 (D)mmWeight: P-9060DH: 8.2 kg, P-9120DH: 10kgAccessory: Power cord (2m) × 1, Volume control cover (YA-920) × 2, Rack mount bracket × 2, Bracket mounting screw (M4 × 16) × 4, Removable terminal plug (3 pins) × 2, Terminal cover × 1, Terminal cover mounting screw (M4 × 8) × 2

* 0dB = 1V

Amplifiers Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Digital Matrix Mixer

9000 Series Modules

3938

Power Source: 120V AC, 60 Hz (CU version)/220 – 240V AC, 50/60 Hz (CE version)Power Consumption: 40WAudio Input: Max. 8 channels, modular construction (modules optional)Audio Output: Preamplifier output 1 2: 0dB*, 600Ω, balanced, removable terminal block (3 pins)Module Slot: Analog input(slot 1 – 8): -10dB*, 10kΩ, unbalanced/Digital input(slot 1 – 4): 24 bit/48k Hz/MIX output(slot 1 – 8): -14 dB*, 330Ω, unbalanced/Digital output(slot 5 – 7): 24 bit/48k Hz/Power supply(slot 1 – 8): +24V, -24V, +6V DCDigital Audio Signal Reference Level: -20 dBFSFrequency Response: 20Hz – 20kHz +1, -3 dBTHD: 0.008% (22 kHz LPF, 1 kHz, +10 dB* output)S/N Ratio: At Input short, 20 – 20,000 Hz, ALL FLAT or OFF setting/Output volume min.: 90dB/Output volume max.: 61dB (input 1 vol.: 0 dB, other inputs: OFF)Crosstalk: Over 64 dB at 20 kHzTone Control: Bass: ±12 dB (at 100 Hz), Treble: ±12 dB (at 10 kHz)Parametric Equalizer: 10 bands, Freq: 20 – 20,000Hz, 31 steps, Various range: +/-12 dB, Q: 0.3 – 5Speaker Equalizer: 15 (compatible with TOA speakers only)High-pass Filter: -12 dB/oct, Variable frequency range: 20 – 400 Hz, 14 stepsLow-pass Filter: -12 dB/oct, Variable frequency range: 4,000 – 20,000Hz, 8 stepsCompressor: Depth: 1 – 5

Delay: 0 – 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2) mixer mode onlyScene/Event Memory: 32Operation Mode: Matrix mode/Mixer mode (selector switch)Auxiliary Function: Key lock functionControl Input/Output: RS-232C*2, D-sub connector (9P, female)Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC, short-circuit current: under 1mA, removable terminal block (14 pins)Control output: 4 outputs, open collector output, withstand voltage: 27V DC, control current:50 mA, removable terminal block (14 pins)Remote volume: 2 channels, connect a 10kΩ/linear taper potentiometer or 0 – 10V DC, removable terminal block (14 pins)Operating Temperature: -10°C to 40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel: Aluminum, hair-line, black/Case: Surface-treated steel plate, black paintDimensions: 420 (W) × 107.6 (H) × 353 (D) mmWeight (without modules): 6kgAccessory: Power cord (2m) × 1, Rack mounting bracket × 2, Bracket mounting screw × 4, Blank panel × 7, Blank panel mounting screw × 14, Removable terminal plug (3 pins) × 2, Removable terminal plug (14 pins) × 1, CD × 1


M-9000M2Digital Matrix Mixer(CU/CE version)

Power Source:+24V DC, -24V DC, +6V DCCurrent Consumption: 20mA (at +24V DC), 20mA (at -24V DC), 60mA (at +6V DC)Input: Sensor input (Ambient noise sensor microphone input): 2 channels, 3 k ohms (when the phantom power is ON)/10 kΩ (when the phantom power is OFF), electronically-balanced, removable terminal block (3 pins)Input Sensitivity: -60, -54, -48, -42, -36, -30, -24, -18, -10dB* (selectable)Phantom Power: +24V DCA/D Converter: 24 bit DSADCSampling Frequency: 48 kHzAmbient Noise Control Function: Sensor input reference level adjustment function/Maximum output signal level control: -15 to 0 dB/Minimum output signal level control: -18 to -3 dB/Sample time setting: 10 s, 15 s, 20 s, 30 s, 1 min, 2 min, 3 min, 5 min/Gain ratio setting (Ambient noise: Output signal level): 6:3, 5:3, 4:3, 3:3, 3:4, 3:5, 3:6, 6:-3, 5:-3, 4:-3, 3:-3, 3:-4, 3:-5, 3:-6,Operating Temperature: -10°C to +40°CFinish: Panel: Aluminum, hair-lineDimensions: 35 (W) × 78 (H) × 91.5 (D) mmWeight: 82 gAccessory: Removable terminal plug (3 pins) × 2, Module mounting screw × 2Option: Ceiling mount microphone: AN-9001

*0 dB = 1 V

AN-001TAmbient Noise Control Module

Power Source: +24V DC, -24V DC, +6V DCCurrent Consumption: 35mA (at +24V DC), 35mA (at -24V DC), 60mA (at +6V DC)Output: 2 channels, max. +20dB* (at 10 kΩ load), 600Ω, electronically-balanced, removable terminal block (3 pins)Frequency Response: 20Hz – 20kHz, +1, -3dBTHD + N: 0.005% (at 1kHz, 20Hz – 20kHz BPF, 5V output, 10 kohms load)S/N Ratio: Over 73dB (at 20Hz – 20kHz BPF )Residual Noise: Under -91dB (at 20Hz – 20kHz BPF, VOL: -70dB)Crosstalk: Over 87dB (at 20kHz)D/A Converter: 24 bit DSDACSampling Frequency: 48 kHzTone Control: Bass: ±12dB (at 100Hz), Treble: ±12dB (at 10kHz)Parametric Equalizer: 10 bands, Frequency: 20Hz – 20kHz, 31 steps, Variable range: ±12dB, Q: 0.3 – 5Speaker Equalizer: 10 (setup software has 30 TOA speaker presets)High-pass Filter: -12dB/oct, Variable frequency range: 20Hz – 20kHz, 31 pointsLow-pass Filter: -12 dB/oct, Variable frequency range: 20Hz – 20kHz, 31 pointsCompressor: Depth: 1 – 5Delay: 0 – 40 ms (1 ms step), maximum 40 ms (CH 1 + CH2), mixer mode onlyOperating Temperature: -10°C to +40°CFinish: Panel: Aluminum, hair-lineDimensions: 35 (W) × 78 (H) × 91.5 (D) mmWeight: 82 gAccessory: Removable terminal plug (3 pins) × 2, Module mounting screw × 2

*0 dB = 1 V

Power Source: +24V DC, -24V DC, +6V DCCurrent Consumption: 20mA (at +24 V DC), 20mA (at -24V DC), 60 mA (at +6V DC)Input: 2 channels, 3 kΩ (when the phantom power is ON)/ 10 k ohms (when the phantom power is OFF), electronically-balanced, removable terminal block (3 pins)Input Sensitivity: -60, -54, -48, -42, -36, -30, -24, -18, -10dB* (selectable)Frequency Response: 20 – 20,000Hz, +1, -3 BTHD + N: 0.008% (at 1 kHz, 20 – 20,000Hz BPF, Input sensitivity: -10dB)Input Equivalent Noise: Under -112dB (at 20Hz – 20kHz BPF, Input short, Input sensitivity: -60dB)S/N Ratio: Over 73dB (at 20Hz – 20kHz BPF, Input short, Input sensitivity: -10dB)Crosstalk: Over 75dB (at 20kHz, Input sensitivity: -10dB)CMRR: Over 62dB (at 1kHz, Input sensitivity: -60dB)A/D Converter: 24 bit DSADCSampling Frequency: 48 kHzTone Control: Bass: ±12 B (at 100Hz), Treble: ±12dB (at 10kHz)Parametric Equalizer: 10 bands, Frequency: 20Hz – 20kHz, 31 points, Variable range: -12dB, Q: 0.3 – 5High-pass Filter: -12dB/oct, Variable frequency range: 20Hz – 20kHz, 14 pointsLow-pass Filter: -12dB/oct, Variable frequency range: 20Hz – 20kHz, 8 pointsCompressor: Depth: 1 – 5Phantom Power: +24V DCOperating Temperature: -10°C to +40°CFinish: Panel: Aluminum, hair-lineDimensions: 35 (W) × 78 (H) × 91.5 (D)mmWeight: 82gAccessory: Removable terminal plug (3 pins) × 2, Module mounting screw × 2*0dB = 1V

T-001TDual Line Output Expansion Module with DSP

D-001TDual Mic/Line Input Module with DSP

Power Source: +24V DC, -24V DC, +6V DCCurrent Consumption: 20mA (at +24 V DC), 20mA (at -24V DC), 60 mA (at +6V DC)Input: 2 channels, 2RCA/ch mixed, 10kΩ, unbalanced, RCA pin jackInput Sensitivity: -60, -54, -48, -42, -36, -30, -24, -18, -10dB* (selectable)Frequency Response: 20Hz – 20kHz, +1, -3 BTHD + N: 0.008% (at 1kHz, 20Hz – 20kHz BPF, Input sensitivity: -10dB)S/N Ratio: Over 70dB (at 20Hz – 20kHz BPF, Input short, Input sensitivity: -10dB)Crosstalk: Over 75dB (at 20kHz, Input sensitivity: -10dB)A/D Converter: 24 bit DSADCSampling Frequency: 48 kHzTone Control: Bass: ±12 B (at 100Hz), Treble: ±12dB (at 10kHz)Parametric Equalizer: 10 bands, Frequency: 20Hz – 20kHz, 31 points, Variable range: ±12dB, Q: 0.3 – 5High-pass Filter: -12dB/oct, Variable frequency range: 20Hz – 20kHz, 31 pointsLow-pass Filter: -12dB/oct, Variable frequency range: 31 points, 31 pointsCompressor: Depth: 1 – 5Phantom Power: +24 V DCOperating Temperature: -10°C to +40°CFinish: Panel: Aluminum, hair-lineDimensions: 35 (W) × 78 (H) × 91.5 (D)mmWeight: 82gAccessory: Module mounting screw × 2*0 dB = 1 V

D-001RLine Input Module

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

9000 Series Optional Accessories

39

Power Source: 6V DCCurrent Consumption: 15mAControl Input: 8 channels, open voltage: 3.3V DC, short-circuit current: under 1mA, removable terminal block (9 pins)Control Output: 8 channels, open collector output, withstand voltage: 27V DC, control current: max. 50mA, removable terminal block (9 pins)Operating Temperature: -10°C to +40°CFinish: Panel: Aluminum, hair-lineDimensions: 35 (W) × 78 (H) × 91.5 (D) mmWeight: 62gAccessory: Removable terminal plug (9 pins) × 2, Module mounting screw × 2

C-001TInput/Output Control Module

Power Source: 6V DCCurrent Consumption: 30mA or lessTerminal: Removable terminal block (10 pins) Power Input: 24V DC input x 2 (Applicable AC adapter: AD-246 (option), power supply to Remote Control Panels)Adaptable DC plug: 9.5 (L) × 5.5 (OD) × 2.1 (ID)mmConnection Cable: Shielded CPEV cable (paired data line and paired power line) or Category 5 twisted pair cable for LAN (CAT5-STP)Maximum Cable Distance: 800m in totalConnectable Number of Remote Control Panels: Maximum 16 units (2 link connectors used)Operating Temperature: -10°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel: Aluminum, hair-lineDimensions: 35 (W) × 78 (H) × 91.5 (D) mmWeight: 80gAccessory: Removable terminal plug (10 pins) × 1, Module mounting screw × 2

Applicable Cable: Single conductor shielded cableLine Resistance: 50Ω or less (per line)Terminal: M3 screw terminal, distance between barriers: 7.62mmOperating Temperature: -10°C to +40°CFinish: Surface-treated steel plate, white, paintDimensions: 72 (W) × 127 (H) × 45 (D) mmWeight: 170 gAccessory: Box mounting screw (No. 6 – 32UNC x 30) × 2, Box mounting screw (M4 × 30) × 2, Panel mounting screw × 2

Note: Since no electrical box is supplied with the unit, prepare it separately.

RC-001TRemote Control Module

ZM-9001Remote Panel

Power Source: +24V DC, +6V DCCurrent Consumption: 38mA (at +24V DC), 18mA (at +6V DC)Number of Line: 1 lineType of Selectable Signal: DTMF signalSignaling System: Loop-Start (or Ground-Start, selectable)TEL Line: 0dB, 600Ω, balanced, transformer-isolated, loop voltage: 24V DC or more which should be supplied from the PABX, RJ11 connectorPaging Input: 0dB, 600Ω, balanced, transformer-isolated audio input, removable terminal block (4 pins)Control Input: 1 channel, no-voltage make contact, open voltage: 5V DC, short-circuit current: 0.5mA, removable terminal block (4 pins)Control Output: 4 channels, open collector output (isolated), withstand voltage: 35V DC, control current: max. 50mA, removable terminal block (4 pins)Operating Temperature: -10°C to +40°CFinish: Panel: Aluminum, hair-lineDimensions: 35 (W) × 78 (H) × 91.5 (D) mmWeight: 153 gAccessory: Removable terminal plug (4 pins) × 3, Module mounting screw × 2

ZP-001TTelephone Zone Paging Module

Applicable Cable: Single conductor shielded cableLine Resistance: Under 50 ohms (per line)Terminal: M3 screw terminal, distance between barriers: 7.62mmOperating Temperature: -10°C to +40°CFinish: Surface-treated steel plate, white, paintDimensions: 72 (W) × 127 (H) × 56 (D)mmWeight: 170gAccessory: Box mounting screw (No. 6 – 32UNC x 30) × 2, Box mounting screw (M4 × 30) × 2, Panel mounting screw × 2


Line Resistance: 250Ω or less (per line)Terminal: Removable terminal block (7 pins)Operating Temperature: -10°C to +40°CFinish: Surface-treated steel plate, white, paintDimensions: 120 (W) × 127 (H) × 53.3 (D)mmWeight: 375gAccessory: Box mounting screw × 4, Panel mounting screw × 4, Panel mounting screw × 2, Removable terminal plug (7 pins) × 1

ZM-9002Remote Panel

ZM-9003Remote Panel

Power Source: 24V DC (supplied from RC-001T)Current Consumption: 50mA or lessTerminal: Removable terminal block (10 pins) Connection Cable: Shielded CPEV cable (paired data line and paired power line) or Category 5 twisted pair cable for LAN (CAT5-STP)Operating Section: 4 function buttonsIndicator: 4 function indicators (green LED's)Operating Temperature: -10°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Surface-treated steel plate, white, paintDimensions: 72 (W) × 127 (H) × 49.5 (D)mmWeight: 160gAccessory: Box mounting screw (N0.6-32UNC × 30) × 2, Box mounting screw (M4 × 30) × 2, Panel mounting screw × 2, Removable terminal plug (10 pins) × 1


ZM-9011Remote Panel

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

4140

Power Source: 24V DC (supplied from RC-001T)Current Consumption: 50mA or lessTerminal: Removable terminal block (10 pins) Connection Cable: Shielded CPEV cable (paired data line and paired power line) or Category 5 twisted pair cable for LAN (CAT5-STP)Operating Section: 1 volume controlIndicator: Level indicators (green LED's)Operating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Surface-treated steel plate, white, paintDimensions: 72 (W) × 127 (H) × 57.5 (D)mmWeight: 160gAccessory: Box mounting screw (N0.6-32UNC × 30) × 2, Box mounting screw (M4 × 30) × 2, Panel mounting screw × 2, Removable terminal plug (10 pins) × 1


ZM-9012Remote Panel

Power Source: 24V DC (supplied from RC-001T)Current Consumption: 50mA or lessTerminal: Removable terminal block (10 pins) Connection Cable: Shielded CPEV cable (paired data line and paired power line) or Category 5 twisted pair cable for LAN (CAT5-STP)Operating Section: 8 function buttonsIndicator: 8 function indicators (green LEDs)Operating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Surface-treated steel plate, white, paintDimensions: 120 (W) × 127 (H) × 50.5 (D)mmWeight: 300gAccessory: Box mounting screw (N0.6-32UNC × 30) × 4, Box mounting screw (M4 × 30) × 4, Panel mounting screw × 4, Removable terminal plug (10 pins) × 1


ZM-9013Remote Panel

Power Source: 24V DC (supplied from RC-001T)Current Consumption: 50mA or lessTerminal: Removable terminal block (10 pins) Connection Cable: Shielded CPEV cable (paired data line and paired power line) or Category 5 twisted pair cable for LAN (CAT5-STP)Operating Section: 4 function buttons, 1 volume controlIndicator: 4 function indicators (green LEDs), Level indicators (green LEDs)Operating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Surface-treated steel plate, white, paintDimensions: 120 (W) × 127 (H) × 58.5 (D)mmWeight: 300gAccessory: Box mounting screw (N0.6-32UNC × 30) × 4, Box mounting screw (M4 × 30) × 4, Panel mounting screw × 4, Removable terminal plug (10 pins) × 1


ZM-9014Remote Panel

SS-9001Speaker Selector

Power Req.: Supplied from the optional AD-246 AC adapter or an external 24 V DC/200 mA power supply.Current Consumption: 120mAControl Signal: No-voltage make contact input (polarized), open voltage: 24V DC, short-circuit current: 3mAControl Power: Under 240W (70V/100V line)Speaker Terminal: Removable terminal block (2 pins)Control Terminal: Removable terminal block (10 pins)Operating Temperature: -10°C to +40°CFinish: Case: Surface-treated steel plateDimensions: 112 (W) × 197 (H) × 30 (D) mmWeight: 530 gAccessory: Removable terminal plug (2 pins) × 6, Removable terminal plug (10 pins) × 1, Cord clamp × 1, Mounting screw × 4Option: AC adapter: AD-246

Type: Electret condenser microphonePhantom Power: 14-26V DCCurrent Consumption: 7mA (at 24V DC)Directivity: Omnidirectional (hemispherical)Impedance: 200ΩRated Sensitivity: -5dB (1kHz, 0 dB = 1V/Pa)Frequency Response: 100Hz – 10kHzOutput Terminal: Removable terminal block (3 pins)Operating Temperature: -10°C to +40°CFinish: Panel: ABS resin, white/Frame, Case: Surface-treated steel plateDimensions: ø130 × 37 (D)mmWeight: 170gAccessory: Removable terminal plug (3 pins) × 1, Box mounting screw (No.6-32UNC x 30) × 2, Box mounting screw (M4 x 30) × 2Option: 9000 series plug-in module: AN-001T


AN-9001Ambient Noise Sensing Microphone

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

900 Series Amplifiers

41

M-900MK2(UL version)8-Channel Mixer Preamplifier

P-906MK2 (60W)P-912MK2 (120W)(UL version)Power Amplifier

A-903MK2 (30W)A-906MK2 (60W)A-912MK2 (120W)(UL version)8-Channel Mixer Power Amplifier

Power Source: 120V AC, 60Hz (or 220 – 230/240V AC, 50/60Hz)Power Consumption: 120V/3A (or 490VA)Output Power: (D); 240W RMS/(T); 220W RMSPower Bandwidth: (D); 20Hz – 20kHz, 0.5% THD/(T); 50Hz – 20kHz, 0.5% THDFrequency Response: (D); 20Hz – 20kHz, ±1dB/(T); 20Hz –15kHz, ±1dB/(T); 20Hz – 20kHz, +1dB/-3dB THD.: 0.01% at 1kHz, rated output Input: One Input Port: Port accepts any input module expect T-01.One Direct Input* Use of direct input prohibits use of modular input port.Input Sensitivity/Impedance: Input Port: 100mV or 1000mV (switchable)/10k ohmsDirect Input: 100mV or 1000mV (switchable)/10k ohmsOutput: Main (T); 8 ohms, 25V and 70V, balancedMain (D); 4 ohms, unbalanced

P-924MK2 (240W)(UL version)Power Amplifier

Power Source: 120V AC, 60HzPower Consumption: W-906A: 100W/W-912A: 180WOutput Power: W-906A: 60W RMS/W-912A: 120W RMSPower Bandwidth: (D); 20Hz – 20kHz, 0.5% THD/(T); 50Hz – 20kHz, 0.5% THDFrequency Response: (D); 30Hz – 20kHz, ±1dB/(T); 30Hz – 15kHz, ±1dB/(T); 30Hz – 20kHz, +1dB/-2dBTHD: 0.02% at 1kHz, Rated OutputInputs: Six Input Ports: 100mV/10kΩ/Each port accepts any input module except T-015S, (Use T-01S only in port #5 or #6)/One Bridging Input/Output: 100mV/3.3kΩOutputs: (T); 8Ω, 25V & amp; 70V, balanced/(D); 4Ω, unbalancedOutput Regulation (1kHz): (D); Under 0.5dB, No Load to Full Load/(T); Under 1.0dB, No Load to Full LoadS/N Ratio (Band Pass: 20Hz - 20kHz): Controls OFF: 90dB/ Equalizer IN: 88dB/Master Volume Max.: 77dB/Compressor IN: 84dBCompression: Attack Time: No Greater Than 2msec./Compression Range: 30dB/Release Time: Variable 20msec. to 2sec./Distortion: Less than 1%Equalization: 9-band One octave Graphic Equalizer/Center Frequencies: ISO 63. 125, 250, 500, 1k, 2k, 4k, 8k, 16kHz/Equalization Range: ±12dB

W-906A (60W)W-912A (120W)(UL version) In-Wall Amplifier

Power Source: 120V AC, 60Hz (or 220 – 230/240V AC, 50/60Hz)Power Consumption: 18W (or 21VA)Rated Output: +4dBm, +20dBm (max.)Power Bandwidth: 30Hz – 20kHz, +20dBm 0.5% THD25Hz – 20kHz, +18dBm 0.5% THDFrequency Response: 20Hz – 20kHz, ±1dBTHD: 0.01% at 1kHz, rated outputInput: Eight input ports: Each port accepts any input modules.One bridging input/outputInput Sensitivity/Impedance: Input Port #1 to #8: 100mV/10kΩBridging Input/Output 100mV/3.3kΩOutput: Main: Balanced, 150/600ΩAUX: Unbalanced, 10kΩ, 0dBmOutput Regulation (1kHz): Less than 1.5dB, no load to full loadS/N Ratio (Band Pass 20 Hz– 20kHz) with Tone defeat switch on: Master volume min.: 90dB/Master volume max.; 77dBTone Controls: Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz

Power Source: 120V AC, 60Hz or A-906MK2/A-912MK2: 220 – 230/240V AC (switchable), 50/60HzPower Consumption: A-903MK2: 60W /A-906MK2: 100W (or 220VA) /A-912MK2: 180W (or 370VA)Output Power: A-903MK2: 30W RMS /A-906MK2: 60W RMS/A-912MK2: 120W RMSPower Bandwidth: (D); 20Hz – 20kHz, 0.5% THD/(T); 50Hz – 20kHz, 0.5% THDFrequency Response: (D); 20Hz – 20kHz, ±1dB/(T); 20Hz –15kHz, ±1dB/(T); 20Hz – 20kHz, +1dB/-3dB THD.: 0.02% at 1kHz, rated output Input: Eight input ports: Each port accepts any input modules./One bridging input/outputInput Sensitivity/Impedance: Input Port #1 to #8: 100mV/10kΩ/ Bridging Input/Output: 100mV/3.3kΩPreamp OUT/Power Amp IN: 1000mV into 600Ω/1000mV, 10kΩOutput: Main (T); 4Ω, 25V and 70V, balanced/Main (D); 8Ω, unbalanced/Aux: 10kΩ, 1V (or Main (T); 8Ω, 70V and 100V, balanced (P-912MK2 only))Output Regulation (1kHz): (D) Less than 0.5dB, no load to full load/(T) Less than 1.0dB, no load to full load

Power Source: 120V AC, 60Hz (or P-912MK2: 220 – 230/240V AC, 50/60HzPower Consumption: P-906MK2: 100W/P-912MK2: 180W (or 370VA)Output Power: P-906MK2: 60W RMS/P-912MK2: 120W RMSPower Bandwidth: (D); 20 Hz– 20kHz, 0.5% THD/(T); 50Hz – 20kHz, 0.5% THDFrequency Response: (D); 20Hz – 20kHz, ±1dB/(T); 20Hz –15kHz, ±1dB/(T); 20Hz – 20kHz, +1dB/-3dB THD.: 0.01% at 1kHz, rated output Input: One Input Port: Port accepts any input module expect T-01.One Direct Input* Use of direct input prohibits use of modular input port.Input Sensitivity/Impedance: Input Port: 100mV or 1000mV (switchable)/10kΩDirect Input: 100mV or 1000mV (switchable)/10kΩOutput: Main (T); 8Ω, 25V and 70V, balanced (or 8Ω, 70V and 100V, balanced)/Main (D); 4Ω, unbalanced (or 8Ω, 70V and

Controls: 8 Input gain control, 1 Master gain control, 1 Bass tone control, 1 Treble tone control, 1 Power ON/OFF switch, 1 Tone defeat switchIndicator: 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LEDProtection: Self-protection, with AC fuse (inside)Connectors: Input No. 1 to No. 8: Card-edge connector/Bridging, Aux output: RCA phone jack/Output: Screw-terminal strip/Mute, Remote VR: Screw-terminal strip/AC inlet: 3-pin grounding typeOperation Temperature: -10°C to +60°CFinish: Black Dimensions: 420 (W) × 99.1 (H) × 307.5 (D)mmWeight: 5.3kgAccessory: Volume control cover (YA-920) × 4Option: Rack mounting bracket: MB-25B

S/N Ratio (Band Pass: 20Hz – 20kHz) with Tone defeat switch on: Master volume min.; 90dB/Master volume max.; 77dB/Power amplifier only; 105dBTone Control: Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHzControls: 8 input gain control/1 power ON/OFF switch/1 master gain control/1 low-cut switch (60Hz, 6dB/octave)/1 bass tone control/1 treble tone control/1 tone defeat switchIndicators: 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LEDProtection: Self-protection, with AC fuse (inside)Connectors: Input No. 1 to No. 8: Card-edge connector/Bridging, Aux output: RCA phone jack/Output: Screw-terminal strip/Mute, Remote VR: Screw-terminal strip/AC inlet: 3-pin grounding typeOperation Temperature: -10°C to +60°CFinish: Black Dimensions: 420 (W) × 99.1 (H) × 318 (D)mmWeight: A-903MK2: 7.8kg/A-906MK2: 9.6kg/A-912MK2: 11.4kgAccessory: Volume control cover (YA-920) × 4Option: Rack mounting bracket: MB-25B

100V, balanced)Output Regulation (1kHz): (D) Under 0.5dB, no load to full load (T) Under 1.0dB, no load to full loadS/N Ratio (Band Pass: 20Hz – 20kHz) with Tone defeat switch on: Input level switch in 0dBV (1000mV) position: 108dBInput level switch in -20dBV (100mV) position: 90dBControl: 1 input gain control, 1 power ON/OFF switch, 1 input level switch, 1 low-cut switchIndicator: 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LEDProtection: Self-protection, with AC fuse (inside)Connector: Input: Card-edge connector and screw-terminal strip/Output: Screw-terminal strip/AC outlet: 3-pin grounding typeOperation Temperature: -10°C to +60°CFinish: Black Dimensions: 420 (W) × 99.1 (H) × 358 (D)mmWeight: P-906MK2: 9.1kg/P-912MK2: 10.9kg

Output Regulation (1kHz): (D) Under 0.5dB, no load to full load (T) Under 1.0dB, no load to full loadS/N Ratio (Band Pass: 20Hz – 20kHz): Input level switch in 0dBV (1000mV) position: 108dBInput level switch in -20dBV (100mV) position: 90dBControl: 1 input gain control, 1 power ON/OFF switch, 1 input level switch, 1 low-cut switchIndicator: 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LEDProtection: Self-protection, with 2 AC fuses (inside) and 2 DC fusesConnector: Input: Card-edge connector and screw-terminal strip/Output: Screw-terminal strip/AC outlet: 3-pin grounding typeOperation Temperature: -10°C to +60°CFinish: Black Dimensions: 420 (W) × 151.3 (H) × 334.2 (D)mmWeight: 19.5kg

Filters: High-pass Filter: 180Hz, 12dB/octave/Low-pass Filter: 7kHz, 12dB/octaveIndicators: 1 Power LED, 1 Peak LEDProtection Circuitry: Built-in with 2 AC Fuse (1 inside) and 1 Output Circuitry/Output Circuitry Protection when Heatsink Temperature OverheatsConnectors: Input #1 to #6: Card-edge Connector/Output: Screw-terminal strip/Bridging Input/Output: Screw-terminal strip/Mute: Screw-terminal stripUser's Space (Blank Panel): Size: 101.6 (W) × 60.3 (H) × 95.3 (D)mm/Effective Space for Customizing/Optional expanding kit WE-2 may be loadedWeight: W-906A:13.7kg/W-912A: 17.3kg (without input modules and back box)Finish: SilverAccessories: Volume cover × 3Associated Equipment: Plug-in Module for Input: M-01S, U-01S, B-01S, L-01S, I-01S/Plug-in Module for Input with MUTE: U-12S, B-11S, L-11S, M-11S/Plug-in Module for Input with Remote Volume Control Facility: M-21S, U-21S, B-01S, L-01S, I-01S/Plug-in Module for Line Output: T-01S/Plug-in Module for Tone Signal: S-01S, S-02S, S-03/Volume control cover: YA-910/ Expanded Kit: WE-2

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

900 Series Modules

42

Balanced Line Input(Zin=10k ohms)

Speaker Processor

Balanced Line Input(Zin=600 ohms)

Microphone input

Signal Generator

Output Module

Line Input/ Output

Unbalanced Hi-Z Line input Module

VCA

5PScrew

Terminal (S)

3PTerminal block (S)

RCA (2P)Phono Jack®

stereo (R)

RCA (1P) Phono Jack®

mono (R)

Phone Jack (P)XLR3-14 (M)XLR3-13 (F)

TYPE FUNCTION Source Impedance Input/Sensitivity for Rated output (-20dBV/100mV) Gain THD+N (1kHz) Frequency Response Noise Level

(with 20~20kHz BPF) TONE Control

Signal Activating

Mute Sensitivity

Signal Muting Level

at 1kHz

Remote ControlRange

PowerRequirement

[24VDC]

Compress. Range [Threshold]

Controls [Presettable]

Weight(max.)

110g——

—

—

1-Sensitivity

1-GAIN2-LOW cut3-HIGH cut

1-Gain2-LOW cut3-SENSITIVITY

1-Gain

1-Gain

1-OUTPUT Gain 2-INPUT Gain


1-Gain

1-Gain

1-Gain

1-Gain

—

1-Gain

1-THRESHOLD2-LOW cut3-HIGH cut




20dBThreshold Fixed input level +2dBV (1.26V)

1-GATE2-BGM3-JUKE

1-Gain2-Mute Level

-106dBV(5μV max.)

-100dBV(10μV max.)

-90dBv (30μVmax.)

-106dBV(5μV max.)

-100dBV(10μV max.)

-100dBV(10μV max.)

-100dBv (10μVmax.)

-100dBV(10μV max.)

-106dBV(5μV max.)

1-Gain 2-Tone selectDIP-SW

—

1-GAIN (Muting sens.)

1-GAIN

80g

90g

90g

55g

55g55g55g

110g

80g

85g

110g

65g

85g

90g

80g

110g

110g

60g65g

70g

95g

105g

95g

75g

50g

55g

60g

50g

64g

65g

60g

51g

50g

95g

B-01F—

—

—

—

———

L-01F

—

—

M-01F

—

—

—

—

M-51F

M-61F

——

—

—

—

—

U-01F

—

—

—

—

—

—

—

—

—

—

——

—

—

—

———

—

—

—

M-01M

—

—

—

—

—

—

——

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

——

—

—

—

———

—

—

—

M-01P

M-03P

—

—

—

—

—

——

—

—

—

—

U-01P

—

—

—

—

—

—

—

—

—

—

——

—

—

E-03R

E-04RE-05RE-06R

—

—

—

—

—

—

—

—

—

—

——

—

—

—

—

U-01R

—

U-11R

—

—

—

—

—

V-01S

—

—

——

—

—

—

———

—

—

—

—

—

—

—

—

—

—

——

—

—

—

—

—

U-03R

—

—

U-13R

U-14R

—

—

—

U-43R

—

B-01SB-11S

—

B-41S

—

———

L-01S

L-11S

L-41S

M-01S

—

M-11S

—

M-41S

M-51S

M-61S

S-01SS-02S

S-04S

T-01S

—

—

U-01S

U-03S

U-11S

U-12S

U-13S

—

—

U-61S

—

U-43S

E-07S

——

B-21S

—

—

———

—

—

—

—

—

—

M-21S

—

—

—

——

—

—

T-02S

T-12S

—

—

—

—

—

—

U-21S

—

—

—

—

—

0~-55dB

0~60dB Adjustable

60dB

50dB

0~-55dB

0~-55dB

0~-80dB

——

—

—

—

—

——

—

—

—

—

—

—

—

—

—

100Hz 0~-10dB10kHz 0~-10dB

-86dBv (50μV max.)

20~20kHz ±1.5dB

20~20kHz ±1.0dB

20~20kHz ±1.5dB

20~20kHz ±1.5dB

25~20kHz ±2.0dB at GAIN=40dB

20~20kHz ±1.5dB

25~20kHz ±1.5dB

25~20kHz ±2.0dB

25~20kHz ±1.5dB

20~20kHz ±2.5dB

20~20kHz ±2.5dB

20~20kHz ±1.0dB

20~20kHz ±1.5dB

20~20kHz ±1.0dB

20~20kHz ±1.5dB

20~20kHz ±1.0dB

20~20kHz ±1.5dB

20~20kHz ±1.0dB

20~20kHz ±1.0dB

—

appropriate for F-121C/CM speaker

appropriate for HB-1/FW-100 LPF(-12dB/oct.) fc=100Hz, Q=1.0

appropriate for H-1 speakerappropriate for H-2(WP) speakerappropriate for H-3(WP) speaker

-86dBv (50μV max.)

100Hz 0~-10dB10kHz 0~-10dB

100Hz 0~-10dB10kHz 0~-10dB

100Hz 0~-10dB10kHz 0~-10dB

100Hz 0~-10dB10kHz 0~-10dB

100Hz 0~-10dB

—

—

—

Selectable; 1/2/4 Tone chime, Westminster chime, Gong Tone

-42~-36dBV(8~15mV)

-42~-36dBV(8~15mV)

-70~-62dBV(0.3~0.8mV)

-76~-57dBV(0.15~1.4mV)

-44~-36dBV(6~15mV)

Adjustable-60~-30dBV(1~32mV)

——

—

60dB

—

—

—

—

—

60dB

60dB

55dB

40dB

—

———

——

——

—

—

—

—

—

——

—

—

———

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

-30dBV

—

—

20dBThreshold Adjustable

input level -66~-46dBV (0.5~5mV)

-86dBV (50μV max.)Input Equivalent Noise; -126dBV


-80dBV (0.1mV max.)

-80dBV (0.1mV max.)

-100dBV (10μV max.)

-90dBV (30μV max.)

-90dBV (30μV max.)

-86dBV (50μV max.)

-86dBV (50μV max.)


5mA

27mA

9mA

25mA

25mA25mA25mA

—

5mA

9mA

9mA

9mA

14mA

30mA

15mA

27mA

33mA

7mA11mA

20mA

35mA

38mA

38mA

4mA

8mA

9mA

27mA

11mA

30mA

27mA

30mA

25mA

15mA

35mA

Max. Before Clip into 10kohms load at

Under 0.5% THD (1kHz)

B-01 Balanced Line input

Balanced 10k ohms

-18dBV (125mV) -1dB —

— —

— —

—

—

-1dB

-6dB at 1kHz

0dB at 1kHz0dB at 1kHz0dB at 1kHz

-2dB at 20Hz

-2dB

Nominal 40dBAdjustable 32~52dBNominal 30dBAdjustable 22~42dB

Nominal 40dBAdjustable 27~51dB



Nominal 0dBAdjustable -20~0dB




[BGM] input; Nominal 0dB Adjustable -14~+6dB



0~-30dB

-80~0dB

Output Level;-30~0dB,Input Level Fixed.


-30~0dB Under 0.05%at output 0dBV

—

+12dBV (4V)

+14dBV (5V)

+14dBV (5V)at 100Hz

+12dBV (5V)at 100Hz

+12dBV (4V)

+14dBV (5V) at 1% THD

+12dBV (4V)

+12dBV (4V)

+14dBV (5V)

+14dBV (5V)

+12dBV (4V)

—

Under 0.1% at output 0dBV, 200Hz

Under 0.05%at output 0dBV






Under 0.05%at output -6dBV



0.5V (-6dBV) 0.5%THD

—


Adjustable -20~+10dBv(100mV ~ 3,200mV)

-18dBV (125mV)

-18dBV (125mV) at 20Hz

Norminal -60dBv (1.0mV)Adjustable -72~-52dBv (0.25~2.5mV)Norminal -50dBv (3.2mV)Adjustable -62~-42dBv (0.8~8.0mV)

Norminal -60dBv (1.0mV)Adjustable -72~-52dBv (0.25~2.5mV)



Output; -6dBV (0.5V)Output; 0dBVp-p (1Vp-p)

Output; 3.5dBVp-p (1.5Vp-p)

Output; Adjustable -22~-6dBV(80~500mV) at 600 ohmsterminated, input = 100mVNominal -20dBV (100mV)Adjustable -20~0dBV (100~1000mV)Nominal 0dBV (1V) Adjustable -16~0dBV (160~1100mV) at 600 ohms terminated, input = 100mVNominal -20dBV (100mV)Adjustable -20~0dBV (100~1000mV)Nominal 0dBV (1V) Adjustable -16~0dBV (160~1100mV) at 600 ohms terminated, input = 100mV

Nominal -20dBV (100mV)Adjustable -20~+10dBv (100~3200mV)

[BGM] input; -34~-14dBV[JUKE] input; -42~+10dBV


-20~+10dBv (100mV~3,200mV)

—

-18dBV (125mV)

-14dBV (200mV) at 1kHz

-20dBV (100mV) at 1kHz-20dBV (100mV) at 1kHz-20dBV (100mV) at 1kHz

Input; Unbalanced 50k ohmsOutput; Unbalanced 1k ohms

Output; Balanced 600 ohms

Balanced 600 ohms

Balanced 200 ohms

Unbalanced 50k ohms

Output Balanced600 ohms

Unbalanced 220k ohms

Unbalanced 47k ohms


Unbalanced 10k ohms

Unbalanced 10k ohms

*Refer to p18

Balanced 200 ohms

—

Balanced Line input with Mute-ReceiveBalanced Line input with Remote Volume Control

Balanced Line input with Mute-Send

Processor Module for TOA F-121C/CM SpeakerProcessor Module for TOA H-1 SpeakerProcessor Module for TOA H-2(WP) SpeakerProcessor Module for TOA H-3(WP) SpeakerProcessor Module for TOA HB-1, FB-100 Subwoofer SystemBalanced Line Matching input

1kHz Sine-wave tone Signal GeneratorBuzzer/Yelp Tone signal Generator

Swtich Selectable Tone Generator

Balanced Line output

Unbalanced Line Input

Unbalanced Line input with High/Low Cut Filters

Unbalanced Line input with Compressor

Voltage Controlled Amplifier

Unbalanced Line Input with Mute-Receive

Unbalanced Line Input with Music-On-Hold Output

Unbalanced Line Input with Music-On-Hold Output & Input Mute-Receive

Unbalanced Line input with Variable Mute-Receive Depth

Unbalanced Line input with High/Low Cut Filters and Mute-Receive

Unbalanced Line input with Remote Volume control

Unbalanced Line input with High/Low cut Filters and Mute-Send

Input Priority Module ([JUKE] input with Compressor has priority over [BGM] input.)

Balanced Line Matching input with Mute-ReceiveBalanced Line Matching input with Mute-SendBalanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power.Unbalanced Hi-Z Microphone input with Low-cut and High Cut Filters.Balanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power, Mute-Receive

Balanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power, Mute-Send

Balanced Low-Z Microphone input with Low cut filters, +22VDC Phantom Power, Voice-Gate.

Balanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power, Compressor.

Balanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power, Remote Volume Control.

B-11

B-21

B-41

E-03

E-04E-05E-06

E-07

L-01

L-11

L-41

M-01

M-03

M-11

M-21

M-41

M-51

M-61

S-01S-02

S-04

T-01

T-02

AUX

Line OUTPUT

Unbalanced220k ohms

Balanced600 ohms

AUX

Line OUTPUT

Unbalanced220k ohms

Balanced600 ohms

T-12

U-01

U-03

U-11

U-12

U-13

U-14

U-21

U-43

U-61

V-01

Microphone/Line input Module — 49g — — — — ML-11T ———20~20kHz ±1.0dB — — —— 25mA10~50dB —0.05%-60/-20dB (changeable)Balanced 10k ohmsBalanced, Mute send/receive, +24V DC

Phantom PowerML-11T

Sound RepeaterS-20S

MODELNAME

Sound Repeater Module

900 SERIES PLUG-IN MODULE SPECIFICATIONS & SELECTION GUIDE

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

4342

Balanced Line Input(Zin=10k ohms)

Speaker Processor

Balanced Line Input(Zin=600 ohms)

Microphone input

Signal Generator

Output Module

Line Input/ Output

Unbalanced Hi-Z Line input Module

VCA

5PScrew

Terminal (S)

3PTerminal block (S)

RCA (2P)Phono Jack®

stereo (R)

RCA (1P) Phono Jack®

mono (R)

Phone Jack (P)XLR3-14 (M)XLR3-13 (F)

TYPE FUNCTION Source Impedance Input/Sensitivity for Rated output (-20dBV/100mV) Gain THD+N (1kHz) Frequency Response Noise Level

(with 20~20kHz BPF) TONE Control

Signal Activating

Mute Sensitivity

Signal Muting Level

at 1kHz

Remote ControlRange

PowerRequirement

[24VDC]

Compress. Range [Threshold]

Controls [Presettable]

Weight(max.)

110g——

—

—

1-Sensitivity


1-Gain2-LOW cut3-SENSITIVITY

1-Gain

1-Gain



1-Gain

1-Gain

1-Gain

1-Gain

—

1-Gain

1-THRESHOLD2-LOW cut3-HIGH cut




20dBThreshold Fixed input level +2dBV (1.26V)

1-GATE2-BGM3-JUKE

1-Gain2-Mute Level

-106dBV(5μV max.)

-100dBV(10μV max.)

-90dBv (30μVmax.)

-106dBV(5μV max.)

-100dBV(10μV max.)

-100dBV(10μV max.)

-100dBv (10μVmax.)

-100dBV(10μV max.)

-106dBV(5μV max.)

1-Gain 2-Tone selectDIP-SW

—

1-GAIN (Muting sens.)

1-GAIN

80g

90g

90g

55g

55g55g55g

110g

80g

85g

110g

65g

85g

90g

80g

110g

110g

60g65g

70g

95g

105g

95g

75g

50g

55g

60g

50g

64g

65g

60g

51g

50g

95g

B-01F—

—

—

—

———

L-01F

—

—

M-01F

—

—

—

—

M-51F

M-61F

——

—

—

—

—

U-01F

—

—

—

—

—

—

—

—

—

—

——

—

—

—

———

—

—

—

M-01M

—

—

—

—

—

—

——

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

——

—

—

—

———

—

—

—

M-01P

M-03P

—

—

—

—

—

——

—

—

—

—

U-01P

—

—

—

—

—

—

—

—

—

—

——

—

—

E-03R

E-04RE-05RE-06R

—

—

—

—

—

—

—

—

—

—

——

—

—

—

—

U-01R

—

U-11R

—

—

—

—

—

V-01S

—

—

——

—

—

—

———

—

—

—

—

—

—

—

—

—

—

——

—

—

—

—

—

U-03R

—

—

U-13R

U-14R

—

—

—

U-43R

—

B-01SB-11S

—

B-41S

—

———

L-01S

L-11S

L-41S

M-01S

—

M-11S

—

M-41S

M-51S

M-61S

S-01SS-02S

S-04S

T-01S

—

—

U-01S

U-03S

U-11S

U-12S

U-13S

—

—

U-61S

—

U-43S

E-07S

——

B-21S

—

—

———

—

—

—

—

—

—

M-21S

—

—

—

——

—

—

T-02S

T-12S

—

—

—

—

—

—

U-21S

—

—

—

—

—

0~-55dB

0~60dB Adjustable

60dB

50dB

0~-55dB

0~-55dB

0~-80dB

——

—

—

—

—

——

—

—

—

—

—

—

—

—

—

100Hz 0~-10dB10kHz 0~-10dB

-86dBv (50μV max.)

20~20kHz ±1.5dB

20~20kHz ±1.0dB

20~20kHz ±1.5dB

20~20kHz ±1.5dB

25~20kHz ±2.0dB at GAIN=40dB

20~20kHz ±1.5dB

25~20kHz ±1.5dB

25~20kHz ±2.0dB

25~20kHz ±1.5dB

20~20kHz ±2.5dB

20~20kHz ±2.5dB

20~20kHz ±1.0dB

20~20kHz ±1.5dB

20~20kHz ±1.0dB

20~20kHz ±1.5dB

20~20kHz ±1.0dB

20~20kHz ±1.5dB

20~20kHz ±1.0dB

20~20kHz ±1.0dB

—

appropriate for F-121C/CM speaker

appropriate for HB-1/FW-100 LPF(-12dB/oct.) fc=100Hz, Q=1.0

appropriate for H-1 speakerappropriate for H-2(WP) speakerappropriate for H-3(WP) speaker

-86dBv (50μV max.)

100Hz 0~-10dB10kHz 0~-10dB

100Hz 0~-10dB10kHz 0~-10dB

100Hz 0~-10dB10kHz 0~-10dB

100Hz 0~-10dB10kHz 0~-10dB

100Hz 0~-10dB

—

—

—

Selectable; 1/2/4 Tone chime, Westminster chime, Gong Tone

-42~-36dBV(8~15mV)

-42~-36dBV(8~15mV)

-70~-62dBV(0.3~0.8mV)

-76~-57dBV(0.15~1.4mV)

-44~-36dBV(6~15mV)

Adjustable-60~-30dBV(1~32mV)

——

—

60dB

—

—

—

—

—

60dB

60dB

55dB

40dB

—

———

——

——

—

—

—

—

—

——

—

—

———

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

-30dBV

—

—

20dBThreshold Adjustable

input level -66~-46dBV (0.5~5mV)



-80dBV (0.1mV max.)

-80dBV (0.1mV max.)

-100dBV (10μV max.)

-90dBV (30μV max.)

-90dBV (30μV max.)

-86dBV (50μV max.)

-86dBV (50μV max.)


5mA

27mA

9mA

25mA

25mA25mA25mA

—

5mA

9mA

9mA

9mA

14mA

30mA

15mA

27mA

33mA

7mA11mA

20mA

35mA

38mA

38mA

4mA

8mA

9mA

27mA

11mA

30mA

27mA

30mA

25mA

15mA

35mA

Max. Before Clip into 10kohms load at

Under 0.5% THD (1kHz)

B-01 Balanced Line input

Balanced 10k ohms

-18dBV (125mV) -1dB —

— —

— —

—

—

-1dB

-6dB at 1kHz

0dB at 1kHz0dB at 1kHz0dB at 1kHz

-2dB at 20Hz

-2dB

Nominal 40dBAdjustable 32~52dBNominal 30dBAdjustable 22~42dB








[BGM] input; Nominal 0dB Adjustable -14~+6dB



0~-30dB

-80~0dB

Output Level;-30~0dB,Input Level Fixed.


-30~0dB Under 0.05%at output 0dBV

—

+12dBV (4V)

+14dBV (5V)

+14dBV (5V)at 100Hz

+12dBV (5V)at 100Hz

+12dBV (4V)

+14dBV (5V) at 1% THD

+12dBV (4V)

+12dBV (4V)

+14dBV (5V)

+14dBV (5V)

+12dBV (4V)

—

Under 0.1% at output 0dBV, 200Hz










0.5V (-6dBV) 0.5%THD

—


Adjustable -20~+10dBv(100mV ~ 3,200mV)

-18dBV (125mV)

-18dBV (125mV) at 20Hz

Norminal -60dBv (1.0mV)Adjustable -72~-52dBv (0.25~2.5mV)Norminal -50dBv (3.2mV)Adjustable -62~-42dBv (0.8~8.0mV)




Output; -6dBV (0.5V)Output; 0dBVp-p (1Vp-p)

Output; 3.5dBVp-p (1.5Vp-p)

Output; Adjustable -22~-6dBV(80~500mV) at 600 ohmsterminated, input = 100mVNominal -20dBV (100mV)Adjustable -20~0dBV (100~1000mV)Nominal 0dBV (1V) Adjustable -16~0dBV (160~1100mV) at 600 ohms terminated, input = 100mVNominal -20dBV (100mV)Adjustable -20~0dBV (100~1000mV)Nominal 0dBV (1V) Adjustable -16~0dBV (160~1100mV) at 600 ohms terminated, input = 100mV


[BGM] input; -34~-14dBV[JUKE] input; -42~+10dBV


-20~+10dBv (100mV~3,200mV)

—

-18dBV (125mV)

-14dBV (200mV) at 1kHz

-20dBV (100mV) at 1kHz-20dBV (100mV) at 1kHz-20dBV (100mV) at 1kHz

Input; Unbalanced 50k ohmsOutput; Unbalanced 1k ohms

Output; Balanced 600 ohms

Balanced 600 ohms

Balanced 200 ohms

Unbalanced 50k ohms

Output Balanced600 ohms


Unbalanced 47k ohms


Unbalanced 10k ohms

Unbalanced 10k ohms

*Refer to p18

Balanced 200 ohms

—

Balanced Line input with Mute-ReceiveBalanced Line input with Remote Volume Control

Balanced Line input with Mute-Send

Processor Module for TOA F-121C/CM SpeakerProcessor Module for TOA H-1 SpeakerProcessor Module for TOA H-2(WP) SpeakerProcessor Module for TOA H-3(WP) SpeakerProcessor Module for TOA HB-1, FB-100 Subwoofer SystemBalanced Line Matching input

1kHz Sine-wave tone Signal GeneratorBuzzer/Yelp Tone signal Generator

Swtich Selectable Tone Generator

Balanced Line output

Unbalanced Line Input

Unbalanced Line input with High/Low Cut Filters

Unbalanced Line input with Compressor

Voltage Controlled Amplifier

Unbalanced Line Input with Mute-Receive

Unbalanced Line Input with Music-On-Hold Output

Unbalanced Line Input with Music-On-Hold Output & Input Mute-Receive

Unbalanced Line input with Variable Mute-Receive Depth

Unbalanced Line input with High/Low Cut Filters and Mute-Receive

Unbalanced Line input with Remote Volume control

Unbalanced Line input with High/Low cut Filters and Mute-Send

Input Priority Module ([JUKE] input with Compressor has priority over [BGM] input.)

Balanced Line Matching input with Mute-ReceiveBalanced Line Matching input with Mute-SendBalanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power.Unbalanced Hi-Z Microphone input with Low-cut and High Cut Filters.Balanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power, Mute-Receive

Balanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power, Mute-Send

Balanced Low-Z Microphone input with Low cut filters, +22VDC Phantom Power, Voice-Gate.

Balanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power, Compressor.

Balanced Low-Z Microphone input with High/Low cut filters, +22VDC Phantom Power, Remote Volume Control.

B-11

B-21

B-41

E-03

E-04E-05E-06

E-07

L-01

L-11

L-41

M-01

M-03

M-11

M-21

M-41

M-51

M-61

S-01S-02

S-04

T-01

T-02

AUX

Line OUTPUT

Unbalanced220k ohms

Balanced600 ohms

AUX

Line OUTPUT

Unbalanced220k ohms

Balanced600 ohms

T-12

U-01

U-03

U-11

U-12

U-13

U-14

U-21

U-43

U-61

V-01

Microphone/Line input Module — 49g — — — — ML-11T ———20~20kHz ±1.0dB — — —— 25mA10~50dB —0.05%-60/-20dB (changeable)Balanced 10k ohmsBalanced, Mute send/receive, +24V DC

Phantom PowerML-11T

Sound RepeaterS-20S

MODELNAME

Sound Repeater Module

900 SERIES PLUG-IN MODULE SPECIFICATIONS & SELECTION GUIDE

5P ScrewTerminal

(S)

3P TerminalBlock

(S)

Co

nn

ecto

rs

Plu

g-C

on

nec

tio

n

Bal

ance

dC

onne

ctio

nU

nbal

ance

dC

onne

ctio

nIn

put,

Out

put

Con

nect

ion

Inpu

t, O

utpu

tC

onne

ctio

n

M-03U-01 SeriesU-03U-11 SeriesU-13U-12U-43

M-01 SeriesM-11M-21M-41M-51 SeriesM-61 SeriesB-01 SeriesB-11 Series

B-21B-41L-01 SeriesL-11L-41T-01T-12ML-11T

U-21U-61

T-02

900 SERIES PLUG-IN MODULE CONNECTOIN CHART*

CANNON XLR-3-12(Male) type

CANNON XLR-3-11(Female) type

Phone Plug(Double Pole)

CANNONXLR-3-13

(Female) type (F)

CANNONXLR-3-14

(Male) type (M)

PhoneJack(P)

RCA (2P) PhonoJack® stereo

(R)

RCA (1P) PhonoJack® mono

(R)

CANNON XLR-3-12(Male) type

CANNON XLR-3-11(Female) type

Phone Plug(Single Pole)

—

—

— —

—

—

— ——

— — —

—

—

EARTHHOT

EARTHCOMMONHOT

1 23

EARTH

COMMON

HOT

1 23

EARTH

HOT

123

EARTH

COMMON

HOT

2 —13

EARTH

HOT4 5

3 12

10KPOTENTIOMETER

HOT

EARTH

4 5

3 12

10K

POTENTIOMETER

HOTHOT(OUTPUT)EARTH

EARTH(INPUT)

4 5

3 12

HOT

HOT(INPUT)

EARTHEARTH

COMMON(OUTPUT)

4 5

3 12

HOT

HOT(INPUT)

EARTHEARTH

COMMON(OUTPUT)

HOT

EARTHCOMMON

HCM

HOT

EARTHCOMMON

HCM

HOT

EARTH

HOT

EARTHHOT

EARTH

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

A-700 Series Mixer Power Amplifiers

BG-2000 Series Mixer Power Amplifiers

BG 200 Series PA Amplifiers

44

Power Source: 120V AC, 60HzRated Output: A-706: 60W/A-712: 120W/A-724: 240WPower/Current Consumption: A-706: 155W (rated output), 68W (based on UL60065), under 250mA (when power switch is OFF)/A-712: 285W (rated output), 110W (based on UL60065), under 400mA (when power switch is OFF)/A-724: 565W (rated output), 215W (based on UL60065), under 60mA (when power switch is OFF)Frequency Response: 50Hz – 20kHz (±3dB)Distortion: Under 2% at 1kHz, rated powerInput: INPUT 1 – 6: -70 to -50dB*, 600Ω (MIC)/-10dB*, 600Ω (LINE)/ INPUT 1; Transformer-balanced, removable terminal block (3 pins)/ INPUT 2 – 6; Electronically-balanced, removable terminal block (3 pins) Note: Each of INPUT 2 and 3 can be converted into transformer– balanced type by using an optional transformer IT-455/INPUT 7 – 8 (LINE): -20dB*, 10kΩ, balanced, RCA jack/ MODULE: -20dB*, 10kΩ/ PWR AMP IN: 0dB*, 10kΩ, unbalanced, RCA jack (An equalizer or other signal processor connectable between PRE AMP OUT and PWR AMP IN terminals)Output: REC OUT: 0dB*, 600Ω, unbalanced RCA jack/ PRE AMP OUT: 0dB*, 600Ω, unbalanced, RCA jack/ SPEAKER OUT: 70V line (A-760: 83Ω/A-712: 42Ω/A-724: 21Ω), 25V line (A-760: 10Ω/A-712: 5.2Ω/A-724: 2.6Ω), and 4 – 16Ω, removable terminal block (4 pins)Phantom Power (+23V DC): ON or OFF for each INPUT 1 – 6 (MIC input) with switch setting

S/N ratio (Band Pass; 20Hz – 20kHz): Over 55dB (INPUT 1 – 6, mic trim volume: max., 600Ω terminated)/ Over 70dB (INPUT 1 – 6, mic trim volume: min., 600Ω terminated)/Over 76dB (Master volume: max.)/ Over 90dB (All input volume: min.) Tone Control: Bass; ±10dB at 100Hz, Treble; ±10dB at 10kHz Control Input: REMOTE VOLUME: Removable terminal block/ POWER REMOTE: No-voltage make contact input, open voltage: under 14V DC, short-circuit: under 0.5mA, removable terminal block/MUTE CONTROL: No-voltage make contact input, open voltage: under 17V DC, short-circuit: under 1.5mA, removable terminal blockIndicator: 5-point LED output level meter, Power indicator LED Operating Temperature: -10°C to +40°CFinish: Panel; ABS resin, black, hair line/Case; Steel plate, black Dimensions: 420 (W) × 107.7 (H) × 351.5 (D)mmWeight: A-760: 9.5kg, A-712: 12kg, A-724: 13.5kgAccessory: Power cord (2m) × 1, Removable terminal plug (3 pins) × 6, Removable terminal plug (4 pins) × 1, Removable terminal plug (6 pins) × 1, Volume control cover × 4Option: Rack mounting bracket: MB-25B, Volume control cover: YA-920, Input transformer: IT-455

* 0dB = 1V

A-706 (60W)A-712 (120W)A-724 (240W)(CU version)

Power Source: 120V AC, 60HzRated Output: BG-2035: 35W/BG-2060: 60W/BG-2120: 120WPower Consumption: BG-2035: 94W (rated output), 50W (based on UL/CSA standards)/BG-2060: 163W (rated output), 80W (based on UL/CSA standards)/BG-2120: 265W (rated output), 120W (based on UL/CSA standards)Frequency Response: 50Hz – 20kHzTHD: 0.05% or less at 1kHz, rated outputInput: Mic: -60dB*, 600Ω, electrically-balanced, removable terminal blockLine 1: -10dB*/TEL: -20dB*Line 1/TEL selectable, 10kΩ, electrically balanced, removable terminal blockLine 2, 3: -10dB*. 10kΩ, unbalanced, removable terminal block and ModuleOutput: Speaker: 4Ω 25V (18Ω) and 70V (140Ω), balanced, removable terminal blockMOH: 0dB*, 600Ω, balanced removable terminal blockLine: 0dB*, 600Ω, unbalanced removable terminal blockOutput Regulation: 2dB or less, no load to full load (1kHz)Phantom Power: ON/OFF switch or Mic, +24V DCS/N ratio: Mic: 60dB or more, Line/TEL. Line 2, 3, Module: 75dB or more (Band Pass: 20Hz – 20kHz, Tone Controls: Centered)Muting: Manual mute/Automatic mute

Tone Control: Bass; ±10dB at 100Hz, Treble; ±10dB at 10kHz Control Input: Mic gain control, Line 1/TEL gain control, Line 2 gain control, Line 3 gain control, Module gain control, Bass tone control, Treble tone control, MOH out gain control, Mute control (Manual mute), Remote volume control, Mute sense control. Line 1/TEL selector switch, phantom power switch (Mic), Auto mute switch (Mic, Line 1/TEL, Module), Mute receive switch (Mic, Line 1/TEL, Line 2, 3, Module), MOH assign switch (Mic, Line 1/TEL, Line 2, 3, Module), Power ON/OFF switchIndicator: Power LED, Signal LED, Peak LED Operating Temperature: 0°C to +40°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel; ABS resin, black/Case; Steel plate, black, paint Dimensions: 264 (W) × 94.3 (H) × 267.3 (D)mmWeight: BG-2035: 5.3kg/BG-2060: 5.3kg/BG-2120: 6kgAccessory: Volume control cover: YA-920 × 5, Removable terminal plug (2 pins) × 4, Removable terminal plug (3 pins) × 2, Removable terminal plug (4 pins) × 1, Removable terminal plug (5 pins) × 1Option: Rack mounting bracket: MB-1000

* 0dB = 1V

BG-2035 (35W)BG-2060 (60W)BG-2120 (120W)(CU version)

Power Source: 120V AC, 60HzRated Output: BG-220: 20W/BG-235: 35WPower/Current Consumption: BG-220: 60W (rated output), 36W (based on cULus standards)/BG-235: 90W (rated output), 55W (based on cULus standards)Frequency Response: 50Hz – 20kHzTHD: 0.5% or less, at 1kHz, rated outputInput: Mic: -60dB*/Line: -10dB*Mic/Line: 1 selectable, 600Ω, electronically balanced, removable terminal block or RCA jackLine 2, 3: -10dB*, 10kΩ, unbalanced removable terminal block Output: Speaker: 4Ω, 25V (31Ω) and 70V (245Ω), balanced, removable terminal blockMOH: 0dB*, 600Ω, balanced removable terminal blockLine: 0dB*, 600Ω, unbalanced removable terminal blockOutput Regulation: 2dB or less, no load to full load (1kHz)S/N ratio: Mic/Line 1: 60dB or more, Line 2, 3: 80dB or more (Band Pass: 20Hz – 20kHz, Tone Controls: Centered)Muting: Manual mute/Automatic muteTone Control: Bass; ±10dB at 100Hz, Treble; ±10dB at 10kHz

Control: Mic/Line 1 gain control, Line 2 gain control, Line 3 gain control, Bass tone control, Treble tone control, MOH out gain control, Mute control (Manual mute), Mute sense control, Auto mute switch (Mic/Line 1)Mic/Line 1 switch, Mute receive switch (Line 2, 3), MOH assign switch (Mic/Line 1, Line 2, 3), Power ON/OFF switchIndicator: Power LED, Signal LED, Peak LED Operating Temperature: 0°C to +35°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel; ABS resin, black/Case; Steel plate, black, paint Dimensions: 210 (W) × 94.3 (H) × 265 (D)mmWeight: BG-220: 3.5kg, BG-235: 4kgAccessory: Volume control cover: YA-920 × 3, Removable terminal plug (2 pins) × 3, Removable terminal plug (3 pins) × 1, Removable terminal plug (4 pins) × 1, Removable terminal plug (5 pins) × 1Option: Rack mounting bracket: MB-25B-BK, MB-25B-J

* 0dB = 1V

BG-220 (20W)BG-235 (35W)(CU version)Mixer Amplifier

BA-235 (35W)BA-260 (60W)(CU version)Power Amplifier

Power Source: 120V AC, 60HzRated Output: BA-235: 35W/BA-260: 60WPower/Current Consumption: BA-235: 90W (rated output), 52W (based on cULus standards)/BA-260: 130W (rated output), 66W (based on cULus standards)Frequency Response: 50Hz – 20kHzTHD: 0.5% or less, at 1kHz, rated outputInput: Line In: 0dB*/+4dB* (selectable), 10kΩ, unbalanced, removable terminal block or RCA jackOutput: Speaker: 4Ω, 25V (31Ω) and 70V (245Ω), balanced, removable terminal blockBridge: parallel in Line in, removable terminal blockOutput Regulation: 2dB or less, no load to full load (1kHz)S/N ratio: 80dB or more (Band Pass: 20Hz – 20kHz, Tone Controls: Centered)Tone Control: Bass; ±10dB at 100Hz, Treble; ±10dB at 10kHz

Control Input: Master gain control, Bass tone control, Treble tone control, Input Level selector switch, Remote Volume control, Power ON/OFF switchIndicator: Power LED, Signal LED, Peak LED Operating Temperature: 0°C to +35°COperating Humidity: 35% to 80% RH (no condensation)Finish: Panel; ABS resin, black/Case; Steel plate, black, paint Dimensions: 210 (W) × 94.3 (H) × 265 (D)mmWeight: BA-235: 4kg, BG-260: 4.6kgAccessory: Volume control cover: YA-920 × 3, Removable terminal plug (2 pins) × 3, Removable terminal plug (4 pins) × 1, Option: Rack mounting bracket: MB-25B-BK, MB-25B-J

* 0dB = 1V

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

45

Model No. A-2030 A-2060 A-2120 A-2240

Power Source L version: 110 –120V AC or 24V DC H/CE version: 220 – 240V AC or 24 – 30V DCRated Output 30W 60W 120W 240W Power Consumption 34W (EN60065)/78W (AC 72W (EN60065)/150W (AC 24W (EN60065)/260W (AC 238W (EN60065)/520W (AC operation at rated output/2A operation at rated output/4A operation at rated output/6A operation at rated output/15A 2A (DC operation at rated output) 4A (DC operation at rated output) 6A (DC operation at rated output) (DC operation at rated output)Frequency Response 50Hz – 20kHz (±3dB)Distortion Under 1% at 1kHz, 1/3 rated powerInput H/L version: MIC 1 – 3; –60dB*, 600 ohms, balanced, phone jack/AUX 1, 2; –20dB*, 10k ohms, unbalanced, RCA pin jack CE version: MIC 1; –60dB*, 600 ohms, balanced, DIN type (5 pins)/MIC 2, 3; –60dB*, 600 ohms, balanced, phone jack/ AUX 1, 2; –20dB*, 10k ohms, unbalanced, RCA pin jack/Mute; Contact pin 4 – 5 closure input (for MIC 1)Output Speaker output H/L version: Balanced (floating) CE version: Balanced (floating), M3.5 screw terminal, distance between barriers: 8.3mm High impedance 330 ohms, 170 ohms 170 ohms, 83 ohms 83 ohms, 42 ohms 42 ohms, 21 ohms Low impedance 4 ohms (11V) 4 ohms (15.5V) 4 ohms (22V) 4 ohms (31V) Rec out 0dBV*, 600 ohms, unbalanced, RCA pin jackPhantom Power DC +21V (MIC 1)S/N ratio Over 60dBTone Control Bass; ±10dB at 100Hz, Treble; ±10dB at 10kHz Muting MIC 1: Mutes other input signals by 0 – 30dB attenuation Indicator Power, signal, peakFinish Panel; ABS resin, black/Case; Steel plate, blackDimension 420 (W) × 100.9 (H) × 280.3 (D)mm 420 (W) × 100.9 (H) × 360.3 (D)mmWeight 5kg 7kg 10.8kg 13.2kg* 0dBV = 1V

A-2030 (30W)A-2060 (60W)A-2120 (120W)A-2240 (240W)Mixer Power Amplifier(L/H/CE version)

P-2240 (240W)Power Amplifier(L/H/CE version)


Power Source L version: 110 –120V AC or 24V DC H/CE version: 220 – 240V AC or 24V DCRated Output 240WPower Consumption 238W (EN60065)/520W (AC operation at rated output/15A (DC operation at rated output)Frequency Response 50Hz – 20kHz (±3dB)Distortion Under 1% at 1kHz, 1/3 rated powerInput H/L version: Line in; 0dB*, 10k ohms, balanced, screw terminal/ 100V line in; 40dB*, 330k ohms, unbalanced, screw terminal/Power remote control; Make contact CE version: Line in; 0dB*, 10k ohms, balanced, screw terminal, distance between barriers: 8.3mm/ Speaker line in; 40dB*, 330k ohms, unbalanced, screw terminal, distance between barriers: 8.3mm/ Power remote control; Make contactOutput H/L version: Loop out; 0dB*, 10k ohms, balanced, screw terminal Speaker out; Balanced (floating) High impedance: 42 ohms (100V), 21 ohms (70V) Low impedance: 4 ohms (31V) CE version: Loop out; 0dB*, 10k ohms, balanced, screw terminal, distance between barriers: 8.3mm Speaker out; Balanced (floating) High impedance: 42 ohms (100V), 21 ohms (70V) Low impedance: 4 ohms (31V)S/N ratio Over 60dB Ventilation Fan coolingTone Control Bass; –10dB at 100Hz, Treble; –10dB at 10kHz Indicator Power, signal, peakFinish Panel; ABS resin, black, hair line/Case; Steel plate, blackDimensions 420 (W) × 100.9 (H) × 351.3 (D)mmWeight 13.2kg* 0dBV = 1V

L/H version

CE version

Typical Connection

SpeakersRadio tuner or CD player

Cassette tape player

Dynamic microphones

Electret condenser microphone

Booster amplifierP-2240 (240W)

A-2120 (H version)

A-2000 SeriesVo

ice

Evac

uatio

nSy

stem

s

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t


Typical Connection

46

Power Source: 220 – 230V AC 50/60Hz, or 24V DCRated Output: A-1803; 30W, A-1806; 60W, A-1812; 120W Power/Current Consumption: AC operation; A-1803; 80W (rated output), 37W (EN60065), A-1806; 158W (rated output), 66W (EN60065), A-1812; 260W (rated output), 110W (EN60065)/24V DC operation; A-1803; 2.0A (rated output), 1.0A (EN60065), A-1806; 3.8A (rated output), 1.6A (EN60065), A-1812; 7.0A (rated output), 2.8A (EN60065) Frequency Response: 50Hz – 20kHz (±3dB)Distortion: 2% or less at 1kHz, rated powerInput: MIC 1; -60dB*1, 600Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack, DIN socket (5 pins)/MIC 2 – 3; -60dB*1, 600Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack/AUX 1(MOH); -20dB*1, 10kΩ, unbalanced, RCA pin jackAUX 2; -20dB*1, 10kΩ, unbalanced, RCA pin jack/AUX 3; -20dB*1, 10kΩ, unbalanced, combined type of XLR-3-31 and phone jack/TEL*2; -20dB*1, 10kΩ, electronically-balanced, M3 screw terminal/EMERGENCY; 0dB*1, 600Ω, unbalanced, M3 screw terminalOutput: REC; 0dB*1, 600Ω, unbalanced, RCA pin jack/LINE 1, 2*3; 0dB*1, 600Ω, unbalanced, RCA pin jack/MOH; 0dB*1, 600Ω, transformer balanced, M3 screw terminal/SPEAKER SELECTOR; 2 zone, high impedance (A-1803; 100V line/330Ω, A-1806; 100V line/167Ω, A-1812; 100V line/83Ω), individual selector switch, M4 screw terminal/DIRECT SPEAKER OUT; High impedance (A-1803; 100V line/ 330Ω, A-1806; 100V line/16Ω, A-1812; 100V line/83Ω), M4 screw terminal/Low impedance (4 – 16Ω), M4 screw terminal/(Both Low and High impedance terminals cannot be used at the same time.)Phantom Power: ON or OFF for each MIC 1 – 3 with switch settingS/N ratio (Band Pass; 20Hz – 20kHz): 100dB or more (Master volume: min)/76dB or more (Master volume: max)/60dB or more (MIC 1 – MIC 3)/76dB (AUX 1 – AUX 3)/

90dB or more (TEL)/96dB or more (EMERGENCY)Tone Control: Bass; ±10dB at 100Hz, Treble; ±10dB at 10kHz Control Input: TEL; No-voltage make contact input, open voltage: 24V DC, short-circuit: under 5mA, M3 screw terminal/EMERGENCY*4; No-voltage make contact input, short-circuit: under 10mA, M3 screw terminalControl Output: Power remote; Open collector output, withstand voltage; 35V DC, control current; under 50mA, M3 screw terminal Chime: 1-tone, 2-tone, or ascending 4-tone chime, or None selectable with switch setting, activated at MIC 1's DIN or CONTROL TEL terminal Indicator: 5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED, TEL LED Priority: EMERGENCY; Overrides other inputs/TEL; Overrides other inputs except “EMERGENCY”, ON/OFF selectable with switch setting/MIC 1; Overrides other inputs except “EMERGENCY & TEL”, ON/OFF selectable with switch settingOperating Temperature: -10°C to +40°C Finish: Panel; ABS resin, black, hair line/Case; Steel plate, blackDimensions: 420 (W) × 107.7 (H) × 367 (D)mm Weight: A-1803; 8.1kg, A-1806; 9.4kg, A-1812; 12.6kg Accessory: Power cord × 1, Terminal block cover × 1, Terminal block cover mounting screw × 2Option: Rack mounting bracket; MB-25B/Volume control cover; YA-920/Input transformer; IT-453A

Note: Distance between barriers on the above screw terminals: M3 = 7mm, M4 = 9mm*1 0dB = 1V*2 Can be transformer-balanced with the addition of optional IT-453A input transformer.*3 LINE 1 and LINE 2 outputs can be interlocked with ZONE 1 and ZONE 2 speaker selectors, respectively. (This function needs internal modification.)*4 Operation when activated can be selected from the following: Turning ON the unit's power (factory-preset) or OFF. (The OFF function needs internal modification.)

P-1812 (120W)(ER version)Power Amplifier

Rated Output: 120WPower/Current Consumption: AC operation: 258W (rated output), 94W (EN60065)/24V DC operation: 7.0A (rated output), 2.7A (EN60065)Frequency Response: 50Hz – 20kHz (±3dB)Distortion: Under 2% at 1kHz, rated powerInput: LINE: 0dB*1/-10dB*1 (switchable), 10kΩ, transformer balanced, RCA pin jackOutput: LINE; 0dB*1, 600Ω, unbalanced, RCA pin jack/SPEAKER; High impedance (100V line/83Ω), M4 screw terminal, Low impedance (4 – 16Ω), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time.)S/N ratio (Band Pass; 20Hz – 20kHz): Over 100dB (Master volume; min)/Over 97dB (Master volume; max, INPUT LEVEL switch; 0dB)/Over 90dB (Master volume; max, INPUT LEVEL switch; -10dB) Control Input: POWER REMOTE; No-voltage make contact input, open voltage; 24V DC, short-circuit; under 1mA, M3 screw terminal/EMERGENCY*2; No-voltage make contact input, open voltage; 24V DC, short-circuit; under 1mA, M3 screw terminalIndicator: 5 point LED output level meter, Power indicator LED

Operating Temperature: -10°C to +40°CFinish: Panel; ABS resin, black, hair line/Case; Steel plate, black Dimensions: 420 (W) × 107.7 (H) × 367 (D)mmWeight: 12.2kgAccessory: Power cord × 1, Terminal block cover × 1, Terminal block cover mounting screw × 2 Option: Rack mounting bracket; MB-25B/Volume control cover; YA-920

Note: Distance between barriers on the above screw terminals: M3 = 7mm, M4 = 9mm*1 0dB = 1V*2 Operation when activated can be selected from the following: Turning ON the unit's power (factory-preset) or OFF. (The OFF function needs internal modification.)

A-1803 (30W)A-1806 (60W)A-1812 (120W)(ER version)Mixer Power Amplifier

A-1800 Series

Box speaker

Column speaker

Horn speaker

CD player

Wireless tuner

Cassette tape recorder(for REC)


Microphones

Paging microphonePM-660D

Speakers Booster amplifier(controlled A-1800 Amplifier)

System Expansion Option

HC

TRUNK BOX

PBX

P-1812 (120W)

A-1800 Series

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t


Typical Connection

Package Amplifier

47

Rated Output: A-1706; 60W, A-1712; 120W, A-1724; 240W Power Consumption: A-1706; 150W (rated output), 60W (EN60065), A-1712; 258W (rated output), 105W (EN60065), A-1724; 532W (rated output), 220W (EN60065) Frequency Response: 50Hz – 20kHz (±3dB) Distortion: Under 2% at 1kHz, rated power Input: MIC 1 – 6; -60dB*, 600 ohms, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack/AUX 1 – 2; -20dB*, 600 ohms, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack (Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)/AUX 3 – 4; -20dB*, 10k ohms, unbalanced, RCA pin jack/AUX 5; -20dB*, 10k ohms, unbalanced, combined type of XLR-3-31 equivalent and phone jack/PWR AMP IN; 0dB*, 600 ohms, unbalanced, RCA pin jack (An equalizer or other signal processor connectable between LINE OUT and PWR AMP IN terminals) Output: REC; 0dB*, 600 ohms, unbalanced, RCA pin jack/LINE; 0dB*, 600 ohms, unbalanced, RCA pin jack/SPEAKER SELECTOR; 2 zone, high impedance (A-1706; 100V line/167 ohms, A-1712; 100V line/83 ohms, A-1724; 100V line/42 ohms), individual selector key, M4 screw terminal/DIRECT SPEAKER OUT; High impedance (A-1706; 100V line/167 ohms, A-1712; 100V line/83 ohms, A-1724; 100V line/42 ohms), M4 screw terminal/Low impedance (4 – 16 ohms), M4 screw terminal/(Both Low and High impedance terminals cannot be used at the same time.)

Phantom Power: ON or OFF for each MIC 1 – 6 with switch setting S/N ratio (Band Pass: 20Hz – 20kHz): Over 100dB (Master volume: min)/Over 76dB (Master volume: max)/Over 60dB (MIC 1 – MIC 4)/Over 53dB (MIC 5, 6)/Over 76dB (AUX 1 – AUX 5) Tone Control: Bass: -10dB at 100Hz, Treble: ±10dB at 10kHz Control Input: REMOTE VOLUME; M3 screw terminal/POWER REMOTE; No-voltage make contact input, open voltage: 28V DC (when the unit's power is OFF), short-circuit: under 10mA, M3 screw terminal Indicator: 5 point LED output level meter, Power indicator LED, Zone indicator LED Operating Temperature: -10°C to +40°C Finish: Panel; ABS resin, black, hair line/Case; Steel plate, black Dimensions: 420 (W) × 107.7 (H) × 367 (D)mm Weight: A-1706; 9.3kg, A-1712; 12.6kg, A-1724; 13.5kg Accessory: Power cord × 1, Terminal block cover × 1, Terminal block cover mounting screw × 2 Option: Rack mounting bracket; MB-25B, Volume control cover; YA-920

Note: Distance between barriers on the above screw terminals: M3 = 7mm, M4 = 9mm* 0dB = 1V

A-1706 (60W)A-1712 (120W)A-1724 (240W)(ER version)Microphone Mixer Power Amplifier

A-230 (30W)(HV version)Package Amplifier

Power Source: 220 – 230V 50/60Hz AC, or 12V DC Rated Output: 30W Power Consumption: 34W (AC operation at IEC60065)Current Consumption: 4.5A (DC operation at IEC60065)Frequency Response: 50Hz – 20kHz (±3dB) Distortion: 1% or less at 1kHz, 1/3 rated power Input: MIC 1 – 3: -60dB* (1.0mV), 600Ω, unbalanced, phone jack/AUX: -20dB* (100mV), 10kΩ, unbalanced, RCA pin jackOutput: Speaker out: Balanced (floating)/High impedance: 330Ω (100V)/Low impedance: 4Ω (11V)S/N ratio: 60dB or less (MIC 1 –3)/70dB or less (AUX)Tone Controls: Bass: -10dB at 100Hz/Treble: -10dB at 10kHz

Muting: MIC 1 overrides other mic inputs and AUX input with 0 – 30dB attenuationIndicator: Power LED, Signal LEDFinish: Panel; ABS resin, black/Case; Steel plate, black Dimensions: 350 (W) × 100 (H) × 240 (D)mm Weight: 3.5kg

* 0dB = 1V

A-1700 Series

Box speakers

Column speaker

Horn speaker


CD player (AUX 4)

Cassette tape player(AUX 3)

Cassette tape recorder (for REC)

Equalizer( for tone control)

Microphones

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

D-2000 Series Modules

D-2000 Series Digital Mixing Systems

48

Mixers

Power Source: 220 – 240V AC (CE version)/120V AC (CU version), 50/60HzPower Consumption: 76WFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input)Input and Output: Input: Max. 32 channels, modular construction (modules optional) Output: Max. 32 channels, modular construction (modules optional)Monitor bus: 1 stereo input, 1 stereo output/Connector: RJ45 connector/Connection cable: Shielded Category 5 or higher twisted pair LAN cable (CAT5-STP)/Maximum cable distance: 100m (between D-2008SP and D-2012C)Headphone: 1 stereo

Preset memory: 32Auxiliary Function: Key Locking functionControl: RS-232C, D-sub connector (9 pins), Remote control Module: Remote control module slot: 2Operating Temperature: +5° C to +40°CFinish: Panel; Aluminum, hair-line finish, black/Case; Surface-treated steel plate, black, 30% glossDimensions: 482 (W) × 132.6 (H) × 343.4 (D)mmWeight: 6.3kgAccessory: Power cord (2m) x 1, Rack mounting screw x 4, CD (Set-up software) x 1, Module mounting screw (spare) x 4, Blank panel (preinstalled on the module slot) x 8Option: Mic/line input module: D-2000AD1, D-921E, D-921F, D-922E, D-922F/ Stereo select input module: D-936R/ Digital input module: D-923AE/ Line output module: D-971E, D-971M, D-971R, D-2000DA1/Digital output module: D-961SP, D-972AE/ CobraNet interface module: D-2000CB/ Remote control module: D-981, D-983/ VCA control module: D-984VCPersonal Computer RequirementsCPU: Intel Pentium4 2GHz or higherMemory: 1.5GB or more (2 GB or mor recommended)Display: 1024 × 768 resolution or higherFree hard Disk Space: 16 MB or more (for D-2000 Setting Software installation)500 MB or more (when "NET Framework" needs to be installed)LAN Card: Compatible to 10BASE-T or faster connectionOS: Windows XP SP2 or later, Windows Vista (32/64-bit edition), Windows 7 (32/64-bit edition)Required Component: NET Framework3.5SP1

*Pentium is a registered trademark of Intel Corporation.*Windows, Windows Vista is a registered trademark of Microsoft Corporation.

D-2008SP(CE/CU version) Digital Mixing Processor Unit

D-2012C(CE version) Remote Console Unit

Power Source: 220 – 240V AC, 50/60HzPower Consumption: 18WVolume Adjustment: 100mm motorized fader × 12 Rotary encoder × 8Line Input: 1 channel (stereo), +10 to -20dB*, 10k ohms, unbalanced, RCA Pin-jackHeadphone Output: Stereo 100mW + 100mW (32 ohms load), standard stereo phone-jackMonitor Bus: 1 stereo input, 1 stereo output/Connector: RJ45 connectorConnection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable (2 pairs of data lines)Maximum cable distance: 100m (between D-2008SP and switching hub)LAN: Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) RJ45 connector, Connected via a switching hubNetwork protocol: TCP/IPConnection cable: Shielded twisted pair (STP) 5 or higher (LAN cableMaximum cable distance: 100m (between D-2008SP and switching hub)Control: RS-232C: D-sub connector (9 pins) for maintenance useFinish: Panel; Surface-treated steel plate, Laminated with palycarbonete sheet, gray, mat/Rack mounting bracket: Surface-treated steel plate, gray, matDimensions: 482 (W) × 266 (H) × 138 (D)mm

Weight: 6.6kgAccessory: Power cord (2m) × 1, Rack mounting screw × 4, Fader knob (yellow) × 3, Fader knob (red) × 3, Cord clamp (fitting screw) × 1Option: Console case: D-2012AS

*0dB = 0.775V

Finish: Side panel: MDF, black, paint, matArmrest: MDF, synthetic-leathered, black, matDecorative panel: Stainless steel, silverDimensions: 505 (W) × 127.5 (H) × 333.4 (D)mm (assembled)Weight: 2.3kg (assembled: 7.5kg)Accessory: Assemble screw × 11, Rubber foot × 4, Rubber foot mounting screw × 4

D-2012ASConsole Casefor D-2012C

Signal ProcessingFeedback Suppression Function: 12 filters (auto/dynamic), maximum 4 bus channelsAuto Mixing Function: Ducker (automatic muting), NOM attenuationAuto-Mixing Group: 4 groupsEqualizer/Filter: Parametric equalizer; 20Hz – 20kHz, ±15dB, Q; 0.267 – 69.249Filtering; High-pass filter 20Hz – 20kHz, 6dB/oct, 12dB/oct, Low-pass filter 20Hz – 20kHz, 6 dB/oct, 12 dB/oct, Notch filter 20Hz – 20kHz, Q; 8.651 – 69.249, All-pass filter 20Hz – 20kHz, Q; 0.267 – 69.249, High shelving filter 6Hz – 20kHz, ±15dB, Low shelving filter 20 – 500Hz, ±15dB, Horn equalizer 20kHz, 0 to +18dB (0.5dB steps)Crossover filter; 20Hz – 20kHz, 6dB/oct, 12dB/oct, 18dB/oct, 24dB/octCompressor/Auto-Leveler: (Compressor mode) Threshold: -20 to +20dB (1dB steps)Ratio; 1:1, 1.1:1, 1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1, 5:1, 7:1, 8:1, 10:1, 12:1, 20:1, ∞:1Attack time; 0.2ms to 5s, Release time; 10ms to 5sGain; -∞ to +10dB(Auto-Leveler mode) Target level: -20 to +10dB (1dB steps)Maximum gain; 0 to +20dB (1dB steps)Attack time; 10ms to 10s/Release time; 100ms to 10sOutput Delay: Delay time; 0 – 1360 ms (0.021 ms steps)BUS Delay: Delay time; 0 – 677 ms (0.021 ms steps)Matrix: Input; Max. 34 (32 + 2) channels x 24 buses, Output; Max. 44 (24 + 4 + 16) buses x 32 channelsCobraNet Matrix: Input; Max. 16 channels x 24 buses, Output; Max. 28 (24 + 4) buses x 16 channelsCrosspoint Gain: -∞ to 0dB (1dB steps)

Input: 4 channels, Mic/Line selectable/Mic; -50/-36dB*, 2.6kΩ, electronically-balanced/Line; -10dB*, 2.6kΩ/+4dB*, 7kΩ electronically-balancedConnector: XLR-3-31 equivalentPhantom power supply (48V DC, can be used when set for the Mic)Ground lift switchA/D Converter: 24 bit Sampling Frequency: 48 kHzFrequency Response: 20Hz – 20 kHz, ±1dB (+4dB* input)Dynamic Range: 104dB (IHF-A weighted) or more (+4dB* input)THD: 0.008% or less (+4dB* input)Finish: Panel: Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 200 g

*0 dB = 0.775 V

Network I/F: CobraNet: 100BASE-TX, PRIMARY/SECONDARY 2 system, RJ45 connector, Enables decentralized installation, Audio transmission onlyConnection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable /To be connected via the specified switching hub/Note: This network should be completely independent of other LAN.Number of D-2008SP connection: Max. 4Switching hub stage: Max. 7Max. extend distance: 100m (connected via switching hub)Input: 16 channels, 20 bit/24 bitOutput: 16 channels, 20 bit/24 bitSampling Frequency: 48 kHzFinish: Panel: Pre-coated steel plateDimensions: 17 (W) × 80 (H) × 140 (D) mmWeight: 100 gAccessory: Panel × 1, Screw × 3

* CobraNet is a registered trademark of cirrus Logic Corporation.

D-2000CBCobraNet Interface Module

D-2000AD1Mic/Line Input Module

D-2000DA1Line Output Module

Output: 4 channels, +4dB*/-10dB* (changeable), adaptable load of 600Ω or more, balanced (electronically-balanced)/unbalanced (changeable), XLR-3-31 equivalentD/A Converter: 24 bit Sampling Frequency: 48 kHzFrequency Response: 20Hz – 20 kHz, ±1dBDynamic Range: 104dB (IHF-A weighted) or moreTHD: 0.008% or lessFinish: Panel: Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 200 g

*0 dB = 0.775 V

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

D-901 Digital Mixer

D-901/D-2000 Series Modules and Optional Accessories

D-901/DP-K1/D-2000 Series Modules

49

D-901(CE/US version)Digital Mixer

Power Source: 230V AC (CE version)/120V AC (US version), 50/60 HzPower Consumption: 27WFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* Input)Input: Max. 12 channels, modular construction (modules optional) Output: Max. 8 channels, modular construction (modules optional)Signal ProcessingFeedback Suppression Function: 12 filters (auto/dynamic)

Control: RS-232C, D-sub connector (9 pins), Remote control module (option)Front Panel Section: Preset memory recall key; 8, LCD screen, screen shift key (up/down/left/right), setting knob/Input level indicator; Dual color LED/Output level indicator; Dual color LED/Channel selector key; 12 (input channel selection), 8 (output channel selection)/Channel volume control; 1 (input channel selection), 1 (output channel selection)Rear Panel: Input module slot; 6 (input/output module slot: 2)/Output module slot; 2/Remote control module slot;1Operating Temperature: +5° C to +40°CFinish: Panel; Aluminum, hair-line finish, black/Others; Pre-coated steel plate, black, 30% glossDimensions: 482.6 (W) × 132.6 (H) × 320 (D)mm (excluding projection)Weight: 6.9kgAccessory: Power cord (2m) x 1, Rack mounting screw x 4, Rack mounting bracket (pre-installed on the unit) x 2, Module mounting screw (spare) x 4, Blank panel (pre-installed on the module slot) x 9* When installing the unit, never block the intake vents provided in the unit's bottom near the rear.

Auto Mixing Function: Ducker (automatic muting), NOM attenuationAuto-Mixing Group: 4 groupsEqualizer/Filter: Parametric equalizer; 20Hz – 20kHz, ±15dB, Q; 0.267 – 69.249/Filtering; High-pass filter 20Hz – 20kHz, 6dB/oct,12dB/oct/ Low-pass filter 20Hz – 20kHz, 6 dB/oct, 12dB/oct/ Notch filter 20Hz – 20kHz, Q; 8.651 – 69.249/ All-pass filter 20Hz – 20kHz, Q; 0.267 – 69.249/ High shelving filter 6 – 20kHz, ±15dB/ Low shelving filter 20 – 500Hz, ±15dB/ Horn equalizer 20kHz, 0 to +18dB (1dB steps)/Crossover filter; 20Hz – 20kHz, 6dB/oct,12 dB/oct, 18dB/oct, 24dB/octCompressor/Auto-Leveler: (Compressor mode) Threshold: -20 to +20 dB (1dB steps)/Ratio; 1:1, 2:1, 3:1, 4:1, 8:1, 12:1, 20:1, ∞:1/ Attack time; 0.2ms to 5s/Release time; 10ms to 5s/Gain; -∞ to +10dB/ (Auto-Leveler mode) Target level: -20 to +10dB (1dB steps)/Maximum gain; 0 to +20dB (1dB steps)/ Attack time; 10ms – 10s/Release time; 100ms to 10sDelay: Delay time; 0 – 682.6 ms (0.021 ms steps)Matrix: 12 x 8Crosspoint Gain: -∞ to 0dB (1dB steps)

Preset memory: 16Auxiliary Function: System Locking function

D-911VCA Fader Unit

Power Supply: 5V DC (supplied from the optional D-984VC)Connector: RJ45 connector × 8Input Fader Control: Input fader (100mm) × 12Output Volume Control: Output volume control × 8Contact Control: Illuminated switch × 8Remote Output: No-voltage make contact output (contact capacity: 30V DC, 4A)Remote Switch: Seesaw switch for activating the remote function of the power distributorFinish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 482.6 (W) × 177 (H) × 61.3 (D)mm (excluding projection)Weight: 2.7kgAccessory: Fader knob (Red, Yellow) × 3 each, Volume knob (Red) × 2, Rack mounting screw × 4, Rack mounting bracket (pre-installed on the unit) × 2

VCA Control Input: +5V, GND, Terminal 1 – 20 (12 input channels, 8 output channels), RJ45 connector × 4/Control contents: Volume control of each input/output channel/Variable range: -∞dB to +0dBContact Input: COM + Terminal 1 – 8: Open voltage: 5V DC, short-circuit current: 5mA, RJ45 connector × 2Control Preset Memory Selection: Any preset memory can be recalled./Control method: No-voltage make of over 100ms/No-voltage make single pulse of over 100msVolume Control: Any input/output channel volume can be turned UP or DOWN./Control method: 1 step variation for no-voltage make single pulse of over 100ms/1 step continuous operation for every 70ms for no-voltage make of over 100ms. Can be reset when at break./Variable Range: -∞dB to +10dBChannel: Any input/output channel can be turned ON and OFF./Control method: No-voltage make of over 100ms/No-voltage make single pulse of over 100msStereo Selection: Input channel lines of the D-936R (optional), or the D-937SP (optional) (4 stereo input module) can be selected./Control method: No-voltage make of over 100ms/No-voltage make single pulse of over 100msContact Output: COM + Terminal 1 – 8: No-voltage make contact, contact capacity: 24V DC, 100mA, RJ45 connector × 2Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 170g

D-984VCVCA Control Module



Input: 2 channels, Mic/Line changeable/Mic; -50/-36dB*, 4.7kΩ, electronically-balanced, equivalent to XLR-3-31 type/Line; -10/+4dB*, 10kΩ, electronically-balanced, equivalent to XLR-3-31 type/Phantom power supply (can be used when set for the microphone)/15V: (option: D-901, DP-K1, D-2008SP)/12V: (option: SX-2100AI)/Ground lift switchA/D Converter: 24 bitsSampling Frequency: 48kHz Frequency Response: 20Hz – 20kHz, ±1 dB (+4dB* input) Dynamic Range: 100 dB (IHF-A weighted) or more (+4dB* input)THD: 0.05% or less (+4dB* input) Finish: Panel; Pre-coated steel plate, black , 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 150g

* 0dB = 0.775V

Input: 2 channels, Mic/Line changeable/Mic; -50/-36dB*, 4.7kΩ, electronically-balanced, removable terminal block (3 pins)/Line; -10/+4dB*, 10kΩ, electronically-balanced, removable terminal block (3 pins)/Phantom power supply (can be used when set for the microphone)/15V: (option: D-901, DP-K1, D-2008SP)/12V: (option: SX-2100AI)Ground lift switchA/D Converter: 24 bitSampling Frequency: 48kHzFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input)Dynamic Range: 100dB (IHF-A weighted) or more (+4dB* input)THD: 0.05% or less (+4dB* input)Finish: Panel; Pre-coated steel plate, black , 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 140gAccessory: Removable terminal block type connector (pre-installed on the unit) × 2

* 0dB = 0.775V

Input: 2 channels, -50/-36/-10/+4dB* (Selectable with the DIP switch), 4.7kΩ, electronically-balanced, equivalent to XLR-3-31 type/Phantom power supply (can be set with DIP switch)/15V: (option: D-901, DP-K1, D-2008SP)/12V: (option: SX-2100AI)/Ground lift switch (can be set with the DIP switch)A/D Converter: 20 bitsSampling Frequency: 48 kHzFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input) Dynamic Range: 85dB (IHF-A weighted) or more (+4dB* input) THD: 0.2% or less (+4dB* input)Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 135g

* 0dB = 0.775V



Input: 2 channels, -50/-36/-10/+4dB* (Selectable with the DIP switch), 4.7kΩ, electronically-balanced, removable terminal block (3 pins)/Phantom power supply (can be set with the DIP switch)/15V: (option: D-901, DP-K1, D-2008SP)/12V: (option: SX-2100AI)/Ground lift switch (can be set with the DIP switch)A/D Converter: 20 bitsSampling Frequency: 48 kHzFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input)Dynamic Range: 85dB (IHF-A weighted) or more (+4dB* input)THD: 0.2% or less (+4dB* input)Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D) mmWeight: 125gAccessory: Removable terminal block type connector (pre-installed on the unit) × 2

* 0dB = 0.775V

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

50

D-936RStereo Select Input Module

Input: monaural x 2/-10dB*, 10k ohms, RCA pin jackA/D converter: 24 bitsFrequency Response: 20Hz – 20kHz, ±1dB (+4dB* input)Sampling Frequency: 48 kHzDynamic range: 100dB (IHF-A weighted) or moreTHD: 0.05% or less Finish: Panel: Pre-coated steel plate, black, 30% glossDimensions: 35 (W) x 119.5 (H) x 178.4 (D) mmWeight: 145g

* 0dB = 0.775V

D-923AEDigital Input Module

Input: 2 channels, 2.0 – 7.0V (p-p), 110Ω, XLR-3-31 or equivalentApplicable Format: AES/EBU (2 channel multiplexed)Sampling Frequency: 32 – 48kHzFinish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 130g

D-971RLine Output Module

Output: 4 channels (2 outputs for each channel), -10dB*, adaptable load of over 600Ω, RCA pin jackD/A Converter: 24 bitSampling Frequency: 48kHzFrequency Response: 20 – 20,000 Hz, ±1dBDynamic range: Over 100dB (IHF-A weighted)THD: Under 0.05%Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 150g

* 0dB = 0.775V

D-971MLine Output Module

Output: 4 channels, +4 dB*, adaptable load of over 600 ohms, electronically-balanced, equivalent to XLR-3-32 typeD/A Converter: 24 bitsFrequency Response: 20 – 20,000 Hz, ±1dB Sampling Frequency: 48kHzDynamic Range: Over 100dB (IHF-A weighted)THD: Under 0.05%Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 165g

* 0dB = 0.775V

D-971ELine Output Module

Output: 4 channels, +4dB*, adaptable load of over 600Ω, electronically-balanced, removable terminal block (3 pins)D/A Converter: 24 bitsFrequency Response: 20Hz – 20kHz, ±1dBSampling Frequency: 48kHzDynamic range: Over 100dB (IHF-A weighted)THD: Under 0.05%Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 140gAccessory: Removable terminal block type connector (pre-installed on the unit) × 4

* 0dB = 0.775V

D-981Remote Control Module

Control input: COM + terminals 1 – 8; Open voltage; 5V DC, short-circuit current; 5mA removable terminal block (10 pins)ControlPreset memory selection: Any preset memory can be recalled./ Control method; No-voltage make of over 100ms/no-voltage make single pulse of over 100msVolume Control: Any input/output channel volume can be turned UP or DOWN./Control Method: 1 step variation for no-voltage make single pulse of over 100ms/1 step continuous operation for every 70ms for no-voltage make of over 100ms. Can be reset when at break./Variable Range: -∞dB to +10dBChannel: Any input/output channels can be turned ON and OFF./ Control method; No-voltage make of over 100ms/no-voltage make single pulse of over 100msStereo Selection: Input channel lines of the D-936R (option) or the D-937SP (optional) (4 stereo input module) can be selected./ Control method; No-voltage make of over 100ms/No-voltage make single pulse of over 100msControl output: COM + terminals 1 – 8; No-voltage make contact input, contact capacity; 24V DC, 100mA removable terminal block (10 pins)Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 125gAccessory: Removable terminal block type connector (pre-installed on the unit) × 2

D-961SPDigital Output Module

Output: Stereo 2 channel line (with splitter, can be output to each pair of optical output and coaxial output in Parallel), 0.5V (p-p), 75Ω, Coaxial RCA jack × 2,Square optical connector × 2Applicable Format: S/PDIF (2 channel multiplexed)Sampling Frequency: 48kHzFinish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 130g

D-972AEDigital Output Module

Output: 4 channels, 5.0V (p-p), 110Ω, XLR-3-32 or equivalent × 2Applicable Format: AES/EBU (2 channel multiplexed)Sampling Frequency: 48kHzFinish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 130gAccessory: Ferrite clamp × 2

D-983Remote Control Module

Contact Input: COM + Terminal 1 – 24: Open voltage: 5V DC, short-circuit current: 5mA, RJ45 connector × 4Control Preset Memory Selection: Any preset memory can be recalled./Control method: No-voltage make of over 100ms/No-voltage make single pulse of over 100msVolume: Any input/output channel volume can be turned UP or DOWN./Control Method: 1 step variation for no-voltage make single pulse of over 100ms/1 step continuous operation for every 70ms for no-voltage make of over 100ms. Can be reset when at break./Variable Range: -∞dB to +10dBChannel: Any input/output channel can be turned ON and OFF. /Control method: No-voltage make of over 100ms/No-voltage make single pulse of over 100msStereo Selection: Input channel lines of the D-936R (option), or the D-937SP (optional) (4 stereo input module) can be selected./ Control method; No-voltage make of over 100ms/No-voltage make single pulse of over 100msContact Output: COM + Terminals 1 – 16: No-voltage make contact, contact capacity: 24V DC, 100mA, RJ45 connector × 4Finish: Panel; Pre-coated steel plate, black, 30% glossDimensions: 35 (W) × 119.5 (H) × 178.4 (D)mmWeight: 170g

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Digital Stereo Mixers

M-66 Multi-Route Unit

M-243 Stereo Mixer

51

M-864D(CE/CU version) Digital Stereo Mixer

Power Source: 220 – 240V AC, 50/60Hz (CE version)/100 – 120V AC, 60Hz (CU version)Power Consumption: 30WFrequency Response: 20Hz – 20kHz ±1dBSampling Frequency: 48kHzDynamic Range: 100dB or more (IHF-A weighted)Distortion: 0.03% or less, 1kHz, +4dB* input/output, 20Hz – 20kHz BPFCrosstalk: -80dB or less, 1kHzInput: Monaural input. 8 channels, removable terminal block (3P)Phantom power (+24V DC, 10mA, ON/OFF switchable for eachchannel)/Gain setting (settable for each channel): PAD ON Gain min., +4dB* (max. +24dB*), 10kΩ, electronically-balanced/Gain max., -14dB* (max. +6dB*), 10kΩ, electronically-balanced: PAD OFF Gain min., -10dB* (max. +10dB*), 7kΩ, electronically-balanced/Gain max., -56dB* (max. -36dB*), 7kΩ, electronically-balancedStereo input (L, R) 7 channel (1-A, 1-B, 1-C, 2-A, 2-B, 2-C, frontmountedinput)RCA jack (stereo mini jack provided on the front panel): -10dB* (max. +10dB*), 10kΩ Trim gain for each individual channel: -∞ to 0dB (except frontmounted input)j 1-A (L), 1-B (L), and 1-C (L) are mixed after passing through each trim gain circuit (the same applies to R channel)j 2-A (L), 2-B (L), and 2-C (L) are mixed with front-mounted input after passing through each trim gain circuit (the same applies to R channel)Output: Output, 4 channels, +4dB* (max. +24dB*), applicableload 600Ω or more, electronically-balanced, removable terminalblock (3P)/ REC OUT (L, R): -10dB* (max. +10dB*), applicableload 1kΩ or more, RCA jack/Gain is adjustableA/D Converter: 24 bitsD/A Converter: 24 bitsPreset Memory: 16

Operation Status Indication: Operation status LED × 3Function Setting Panel: Rotary encoder × 3, 10-point positionindication LED × 3, Function mode LED × 3Analog Volume Fader: Input volume fader × 10, Output volumefader × 4, 2 faders linkable with supplied gang barControl SectionContact Input: 8 channels, open voltage: 24V DC, short-circuitcurrent: 5mA, removable terminal block (10P)Contact Output: 8 channels, no-voltage make contact, contactcapacity: 24V DC/100mA, removable terminal block (10P)Remote Control Panel: 2 channels, Maximum number of units: 8 units per channel/ 24V DC input x 2, termination ON/OFF switch x 1, removable terminal block (10P)/Maximum total cable length (star wiring): 800m (total for 2 channels)/Maximum cable length (daisy chain wiring): 400m per channelNote: In daisy chain wiring, the number of units differs depending on thecable length, Star wiring and daisy chain wiring cannot be used together.Type of cable: Shielded CPEV cable (a pair of data cable and a pair ofpower supply cable) or shielded Cat 5 twisted pair cable for LAN (CAT5-STP)Network: Network I/F: 1 channel of 10BASE-T/100BASE-TX (auto-negotiation),RJ45 connector, connection via switching hub/ Network protocol: TCP/IP/Connection cable: Shielded Cat. 5 or higher twisted pair cable for LAN (Cat. 5-STPor better)/ Maximum cable length: 100m (between M-864D and switching hub)Operating Temperature: 0°C to +40°COperating Humidity: 90% RH (no condensation)Finish: Panel: Aluminum hairline, black/ Case: Surface-treated steel plateDimensions: 482.6 (W) × 177.1 (H) × 157.2 (D)mmWeight: 5.1kgAccessory: Power cord (2m) × 1, Removable terminal plug (3P) × 12,Large type removable terminal plug (10P) × 2, Small type removableTerminal plug (10P) × 1, Fader gang bar × 4, Protection cover × 1,CD-ROM (containing setup software) × 1, Rack-mounting screw × 4Option: Remote control panel: ZM-9011/9012/9013/9014/AC adapter: AD-246*0dB = 0.775V

Personal Computer RequirementsRequirements: CPU: Intel Pentium4, 2GHz or faster/ Memory: 1.5GBor more (2GB recommended)/ Display: 1024 × 768 resolution or higher/Free hard Disk Space: 16MB or more. however 600MB or more isrequired for the 32-bit version or 1.5GB or more for the 64-bit versionwhen "NET Framework" is not yet installed/ Optical Driver: CD-ROMdrive, Network Adapter: 10BASE-T or faster connectionOS: Windows XP SP3 or later, Windows Vista (32/64-it) SP1 orlater, Windows 7 (32/64-it edition)Required Component: NET Framework 4 Client Profile*Windows is a registered trademark or trademark of Microsoft Corporation in theUnited States and/or other countries.*Pentium is a registered trademark of Intel Corporation.*Other company names and products are also trademarks of individual companies.

Power Source: 120V AC (L version)/220 – 240V AC (301H version), 50/60Hz

M-243(L/301H version)Stereo Mixer

Noise Level (IHF-A): When all volume controls are in minimum position.Stereo Output (L, R): -105dB* or lessMonaural Output (1, 2): -98dB* or lessWhen the stereo, monaural (1, 2) are in maximum position.Stereo Output (L, R): -94dB* or lessMonaural Output (1, 2): -95dB* or lessFinish: Front Panel: Alumite, black/Case: Steel, blackDimensions: 483 (W) × 46 (H) × 301.8 (D)mmWeight: 3.8kg

*0dB = 0.775Vrms

Power Source: 230V AC (CE version)/120V AC, 50/60HzPower Consumption: 12W

Frequency Response: 20Hz – 20kHz (+1, -3dB)Distortion: 0.01% or less (1kHz, line level nominal input, output)Noise: Output: -100dB* or less (band pass filter, volume minimal)Operating Temperature: 0°C to +40°CFinish: Panel, case; Pre-coated steel plate, black, 30% glossyRack mounting screw; Aluminum, alumite, blackSecurity cover; Acrylic, (smoke) grayDimensions: 482.6(W) × 88.4(H) × 177.8(D)mmWeight: 3kgAccessory: Power cord (2m) × 1/Rack mounting screw × 4

*0dB = 0.775Vrms

M-66(CE version)Multi-Route Unit

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Power Consumption: 10W (120V AC version)/12W (220 – 240V AC version)Monaural Input: Line: -10dB*, 10kΩ, unbalanced phone jack/Mic: -60dB*, 1kΩ, balanced XLR3-pin connector/Mic (Pad): -40dB*, 1kΩ, balanced XLR3-pin connectorStereo Input (L, R): -10dB*, 10kΩ, unbalanced RCA jackAuxiliary Stereo Input: +4dB*, 50kΩ, unbalanced phone jackStereo Output (L, R): +4dB*, 1kΩ, unbalanced phone jackMonaural Output (1, 2): +4dB*, 1kΩ, unbalanced RCA jackREC Output (L, R): -10dB*, 1kΩ, unbalanced RCA jackFrequency Response: 20Hz to 20kHz (+1, -2dB) THD: 0.01% or less (1kHz, rated input/output)

Input: 6 inputs, mic/line changeable, 2kΩ, XLR-3-31 compatible (electrically balanced)/-60dB* (mic)/-10dB*(line )Split Input: -10dB*, 2kΩ, XLR-3-31 compatible (electrically balanced)Mix Input: +4dB*, 10kΩ, XLR-3-31 compatible (electrically balanced)Output: 6 outputs, +4dB* (appropriate impedance not 600Ω or less), XLR-3-32 compatible (electrically balanced)Mix Output: +4dB* (appropriate impedance not 600Ω or less), XLR-3-32 compatible (electrically balanced)Other: Bridging output; XLR-3-32 compatibleInput sensitivity selector switch; Input 1 to 6 (LINE, MIC)Pad switch; Input 1 to 6, split input (20dB)Function selector switch; 1 to 6 (MIX/HA, SPLIT)

Signal Processing SectionAutomatic Resonance Control (ARC) Function: AutomaticEQ curves by ARC, 4 channels (each output channel), settableindependently on each channel, ARC measurement start switch × 1, ON/OFF LED × 1Feedback Suppressor Function: Feedback suppressor filtercreation, 8 channels (each monaural input channel), settableindependently on each channel,ON/OFF switch × 8, ON/OFF LED × 8Filter: 8 channels (each monaural input channel), settableindependently each channel, high-pass filter: 20Hz – 20kHzTone Controller: BASS, Low-shelving filter: 20 – 500Hz, ±15dB/MID, parametric equalizer: 20Hz – 20kHz, ±15dB, Q: 0.267 – 69.249TREBLE, high-shelving filter: 6 – 20kHz, ±15dB/10 channels(each monaural input channel, each stereo mixing input Channel),settable independently on each channelEqualizer: Parametric equalizer: 20Hz – 20kHz, ±15dB, Q: 0.267– 69.249/4 channels (each output channel)Matrix: 12 × 4Crosspoint Gain: -∞ to 0dB in 1dB stepsAutomatic Mute Function: Stereo input section matrix,independent controlFunction: Input PAD (-16dB) control, low cut (cutoff frequency:100Hz) control, analog output attenuator (-6dB, -12dB, -18dB,-24dB, -36dB, -42dB) control, front panel operation lock function,stereo summing function, function setting panel (3 rotary encoders)Front Panel SectionInput Level Indicator: 3-point LED, 12 channels (each monauralinput channel, stereo 1L, 1R, 2L, 2R)Output Level Indicator: 8-point LED, 4 channels (each outputchannel)Auto Resonance Control (ARC) Measurement: ARC measuring start switch × 1, ON/OFF LED × 1Feedback Suppressor (FBS) Function: ON/OFF switch × 8, ON/OFF LED × 8Low Cut: ON/OFF switch × 8, ON/OFF LED × 8Stereo Summing: ON/OFF switch × 2, ON/OFF LED × 2Tone Control: BASS, MID, TREBLE/Settable on the function settingpanel, 10 channels (each monaural input channel, stereo 1L, 1R, 2L, 2R)Monaural Input, Analog Setting: Gain setting, PAD ON/OFF,Phantom power ON/OFF/ Settable on the function setting panel, 8 channels (each monaural input channel)Stereo Input, Analog Setting: Trim setting/ Settable on the functionsetting panel, 6 channels (1-A, 1-B, 1-C), (2-A, 2-B, 2-C)REC OUT, Gain Setting: Gain setting/ Settable on the functionsetting panel, 2 channels (REC OUT L, REC OUT R)Preset Memory Switching: Preset selection switch × 4, ON/OFF LED × 4Front Panel Operation Lock: Operation lock switch × 1

M-633D(CE/CU version) Digital Stereo Mixer

Power Source: 220 – 240V AC (CE version)/120V AC (CU version), 50/60HzPower Consumption: 13WFrequency Response: 20Hz – 20kHzSampling Frequency: 48kHzDynamic Range: 90dB or more (IHF-A weighted) Distortion: 0.03% or more, 1kHz, -10dB* input, 0dB* output (20Hz – 20kHz BPF)Input: 6 monaural input channels (MONO IN 1 – 6), selectable independently from 3 types of inputs below for each channel

Function ON/OFF check indicator × 1Feedback Resonance Control Function: 6 channels (each monaural input channel), independent settings for each channelFunction ON/OFF switch × 6, Function ON/OFF check indicator × 6Automatic Clipguard Function: 6 channels (each monaural input channel), independent settings for each channelAutomatic Mute Function: Function ON/OFF switch × 1Input Level Indicator: 2-color LED indicator: Green (for appropriate level)/red (for peak level)Output Level Indicator: 2-color LED indicator: Green (for appropriate level)/red (for peak level)

Finish: Panel: Aluminum, black, hairline/Case: Pre-coated steel plate, black, 30% glossDimensions: 420 (W) × 44 (H) × 341.3 (D)mmWeight: 4kgAccessory: Power cord (2m) × 1, Removable terminal plug (3 pins) × 10, Rubber foot × 4, Rack mounting bracket × 2, Machine screw (M3 × 8) × 6, Rack mounting screw (M5 × 12) × 4

*0dB = 0.775V

LINE: -10dB*, 2.4kΩ/MIC: -10dB*, 2.4kΩ/PHANTOM: -10dB*, 2.4kΩ supplies phantom power of +24V DC, 10mA electronically balanced Removable terminal block (3 pins), phone jack3 stereo inputs (L, R) (STEREO IN 1 – 3) -10dB*/10kΩ, RCA jack (STEREO IN 1 – 3), Stereo mini jack (ST IN 1)Output: 2 monaural output channels (MONO OUT 1 – 3) 0dB* (applicable load: 1kΩ or more), electronically balanced, removable terminal block (3 pins)1 stereo output (L, R) channel (ST OUT L, R) 0dB* (applicable load: 1kΩ or more), electronically balanced, removable terminal block (3 pins)1 stereo output (L, R) channel (REC OUT L, R) -10dB* (applicable load: 1kΩ or more), RCA jackBus Line: Monaural channel x 2, Stereo channel x 1A/D Converter: 24 bitsD/A Converter: 24 bitsSignal ProcessingAutomatic Level Control Function: 3 out channels (each monaural output channel, stereo output L, R), independent settings for each channel, automatic creation of EQ curves (for sound field compensation)/ ARC measurement start switch × 1,

DP-0206 Modules

Integrated DSP and Control Systems

5352

Signal Processing Equipment

DP-K1 (CE301/CU version)Digital Audio Processor

Front Panel Section: Preset memory recall knob: 1/ Input indicator: Green LED / Output indicator: Green LEDModule Slot (Rear Panel): Input module slot: 4, Output mod-ule slot: 2, Remote control module slot: 1Operating Temperature: +5°C to +40°CFinish: Panel: Aluminum, hair-line finish, black Others: Pre-coated steel plate, black, 30% glossyDimensions: 482.6 (W) × 132.6 (H) × 320 (D)mm (excluding protection)Weight: 7.4 kgAccessory: Power cord (2m) × 1, Rack mounting bracket (pre-installed on the unit) × 2, Rack mounting screw × 4, Blanc panel (pre-installed on the unit) × 8, Module mounting screw (spare) × 4, CD (software) × 1Option: Mic/Line input module: D-921E, D-921F, D-922E, D-922F/Stereo input module: D-936R/Digital input module: D-923AE, D-937SP/Line output module: D-971E, D-971M, D-971R/Digital output module: D-972AE, D-961SP/Remote control module: D-981, D-983

*0 dB = 0.775 Vrms**Windows is a registered trademark of Microsoft Corporation.Note: When installing the unit, never block the intake vents provided in the unit's bottom near the rear.

DP-0206(CE version)Digital Processor

Slope: 6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct/Level: +12 to -∞ dB, with polarity selector/ Delay: 0 – 682msMuting: Output muting

Memory: Pattern memory: 16 memoriesAuxiliary: System Locking functionControl: Control software: PC software (Windows95/98/NT compatible)**/Communications method: RS-232C, D-sub con-nector (9-pin)/ RS-485, terminal black type connector (3 poles), up to 30 units controllable /Remote control module (option): Memory selection, output volume adjustment, and output mut-ing can be remotely controlled from external equipment.Panel Controls: Memory call-up key: 16 memories/ Unit ID indication key: 30 units/ Input level indicator: 6 channels, dual color LED/ Output level indicator: 10 channels, dual color LED/ Memory No./Unit ID indicator: Double-digit 7-segment LED/ Master indicator: Green LED Finish: Panel: Aluminum, hair-line finish, black Others: Pre-coated steel plate, black, 30% glossyDimensions: 482 (W) × 88.4 (H) × 331.1 (D)mmWeight: 4.65 kgAccessory: Rack mounting screw × 4, Fuse × 1

*0 dB = 0.775 Vrms**Windows is a registered trademark of Microsoft Corporation.

Power Source: 230V AC (CE301 version)/100 – 120V AC (CU version), 50/60HzPower Consumption: 40W (450mA)Frequency Response: 20Hz – 20kHz, ±1dB (+4 dB* input)Sampling Frequency: 48 kHzInput: Max. 8 channels, modular construction (modules option)Output: Max. 8 channels, modular construction (modules option) Signal ProcessingAuto Resonance Control Function: Parametric equalizer: 20Hz – 20kHz, ±12dB, Q: 0.267 – 69.249

Level Control: +12 to -∞dB (0.5dB steps), with polarity selectorEqualizer/Filter: Parametric equalizer: 20Hz – 20kHz, ±12dB, Q: 0.267 – 69.249 Filtering: High-pass filter; 20Hz – 20kHz, 6dB/oct, 12dB/oct Low-pass filter; 20Hz – 20kHz, 6dB/oct, 12dB/oct Notch filter; 20Hz – 20kHz, Q: 8.561 – 69.249 All-pass filter; 20Hz – 20kHz, Q: 0.267 – 69.249High shelving filter; 6 – 20kHz, ±12dBLow shelving filter; 20 – 500Hz, ±12dBHorn equalizer; 20kHz, 0 to +18dB (0.5dB steps)Crossover filter: 20Hz – 20kHz, 6dB/oct, 12dB/oct, 18dB/oct, 24dB/oct Compressor: Threshold: -16 to +24dB*/ Ratio: 1 : 1, 2 : 1, 3 : 1, 4 : 1, 8 : 1, 12 : 1, 20 : 1, -∞: 1 / Attack time: 0.02 – 100ms / Release time: 10ms to 5sNoise gate: Threshold: -∞ to -26dB* / Attack time: 0.1 – 100ms / Release time: 20ms to 5sDelay: Delay time: 0 – 682.0ms (0.02ms steps)Matrix: 8 × 8 Level control: 0 to -∞dB (1dB steps), with polarity selector

Preset Memory: 8Auxiliary Function: Key lock functionSetting Software: OS: Windows 2000/XP, Control system: 10 BASE-T/100 BASE-TX, Auto-Negotiation, RJ45 connector

Power Source: 100 – 240V AC, 50/60HzPower Consumption: 30WFrequency Response: 20Hz – 20kHz, ±1dBSampling Frequency: 48 kHzDynamic Range: 110dB (IHF-A weighted)THD: 0.05% or less at 1kHz, +4dB* (20Hz – 20kHz, BPF)Input: 2 channels (expandable to up to 6 channels), +4dB* (Max. +24dB*), 10kΩ, electronically-balanced, terminal block (4 poles)Output: 6 channels (expandable to up to 10 channels), +4dB* (Max. +24dB*), connectable load: 600Ω or less, electronically-balanced, terminal black (3 poles)A/D Converter: 24 bits

D/A Converter: 24 bitsSignal ProcessingLevel Control: +12 to -∞dB, with polarity selectorEqualizer/Filter: Graphic equalizer: 1/3 octave band, 31 center frequencies (10 adjustable points) ±12 dB,Q: 0.267 – 69.249, individually variable bandParametric equalizer: Continuously-variable frequency type (20Hz – 20kHz), 10 points, ±12dB, Q: 0.267 – 69.249 Filtering: High-pass filter 20Hz – 20kHz, 12dB/oct, 6dB/oct Low-pass filter; 20Hz – 20kHz, 12dB/oct, 6dB/oct Notch filter; 20Hz – 20kHz, Q/8.561 – 69.249 Parametric filter; 20Hz – 20kHz, ±12dB, Q/0.267 – 69.249 All-pass filter; 20Hz – 20kHz, Q/0.267 – 69.249High frequency boost or cut; 6 – 20kHz, ±12dBLow frequency boost or cut; 20 – 500Hz, ±12dBHorn equalizer; 20kHz, 0 to +18dBCompressor: Threshold: -16 to +24dB*, Ratio: 1 : 1 -∞: 1, Attack time: 0.02 – 100ms, Release time: 10ms to 5sNoise gate: Threshold: -∞ to -26dB*, Attack time: 0.1 – 100ms, Release time: 20ms to 5sDelay: Delay time: 0 – 682msMatrix: 2 × 6 (Expanded I/O configuration: 2 × 8, 2 ×10, 4 × 6, 4 × 8 or 6 × 6)/ Level control: 0 to -∞dB, with polarity inverterChannel Divider: 2-way, 3-way, 4-way/ Crossover frequency: Overlap mode, 20Hz – 20kHz/

DQ-A02 Analog Output Module

Input: 2 channels, +4dB* (Max. +24dB*), 10kΩ, electroni-cally-balanced, removable terminal block (4 pins)A/D Converter: 24 bitsSampling Frequency: 48kHzFrequency Response: 20Hz – 20kHz (±1dB)Dynamic Range: 110dB (IHF-A weighted)THD: Less than 0.05% at 1kHz, +4dB* (20Hz – 2kHz, BPF)Finish: Pre-coated steel plate, black, 30% glossyDimensions: 26.5 (W) × 76.5 (H) × 168 (D)mmWeight: 80gAccessory: Mounting screw × 2, Seal × 2, Removable terminal plug (4 pins) × 2

*0dB = 0.775V

DQ-A01 Analog Input Module

Output: 2 channels, +4dB* (Max. +24dB*), connectable load, over 600Ω, electronically-balanced, removable terminal block (3 pins)D/A Converter: 24 bitsSampling Frequency: 48kHzFrequency Response: 20Hz – 20kHz (±1dB)Dynamic Range: 110dB (IHF-A weighted)THD: Less than 0.05% at 1kHz, +4dB* (20Hz – 20kHz, BPF)Finish: Pre-coated steel plate, black, 30% glossyDimensions: 26.5 (W) × 76.5 (H) × 168 (D)mmWeight: 100gAccessory: Mounting screw × 2, Seal × 2, Removable terminal plug (3 pins) × 2*0dB = 0.775V

DQ-C01 Remote Control Module

Control Input: COM and terminals 1 – 8: Open voltage: 5V DC, short circuit current: 25mA, removable terminal block (9 pins)Control: Memory selection: Direct: Max., 8 memories, Binary: 16 memories (Any one of 16 memories can be as-signed to each terminal when set for “Direct” mode.)/ Con-trol method: No-voltage make of over 500ms/ No-voltage make pulse of over 500ms (No-voltage make of over 500ms only when set for “Binary” mode.)/ Volume control (Up/Down): Direct: Max. 4 groups, Binary: Max. 10 groups (Any output channel or channel group can be assigned to each terminal.)/ Control method: 1-step variation with no-voltage make pulse of over 500ms./ Continuous variation in 500ms units with pulse of over 700ms./ Continuous up/down variation in 500msec. units with the addition of no-voltage make pulse of over 700msec./ Continuous up/down variation in 500msec units with the addition of no-voltage make pulse of over 700ms/ Continuous volume variation stops when a break pulse is fed./ Variable range: 0 to -∞dB/ Muting (On/Off): Max. 8 groups (Any output channel or channel group can be assigned to each termi-nal.)/ Control method: No-voltage make of over 500ms/ No-voltage make pulse of over 500msThe above controls can be performed singly or in combi-nation with other controlsSetting: PC software (Windows95/98/NT compatible)*Finish: Pre-coated steel plate, black, 30% glossyDimensions: 26.5 (W) × 76.5 (H) × 101 (D)mmWeight: 60gAccessory: Mounting screw × 2, Removable terminal plug (9 pins) × 1

*Windows is a registered trademark of Microsoft Corpora-tion..

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

ts

Equalizers

Digital Ambient Noise Controller

53

E-232(301H version)2-Channel 2/3 Octave Graphic Equalizer

E-1231(US version)1-Channel 1/3 Octave Graphic Equalizer

DP-L2(CE301/CU version) Digital Ambient Noise Controller

Power Source: 220 – 240V AC (CE301 version)/120V AC (CU version), 50/60HzPower Consumption: 20W (300mA)Frequency Response: 20 – 20,000Hz, ±1dBSampling Frequency: 48kHzDynamic Range: Over 108dB (IHF-A weighted) Distortion: Under 0.006%, 1kHz, +4dB* input/output (20 – 20,000Hz BPF)Input: Sensor input (Ambient noise sensor microphone input): +4/-48dB* changeable, 10kΩ, electronically-balanced, removable terminal block (4 pins), phantom power (+15V DC, can be turned on or off with Phantom switch) with +15V DC terminal Input 1, 2: +4/-8/-20dB* changeable, 15kΩ, electronically-balanced, removable terminal block (3 pins)Output: Monitor output:+4dB*, 600Ω, electronically-balanced, removable terminal block (3 pins)/Output 1, 2: +4dB*, 600Ω, electronically-balanced, removable terminal block (3 pins)A/D Converter: 24 bitD/A Converter: 24 bitSignal ProcessingAutomatic Level Control Function: Level meter (4 LED meters)/ Automatic input signal level control function/Automatic input sensitivity setting function: +4/-8/-20dB*/Noise gate level setting: -99 to -3dB

Ambient Noise Control Function: Level meter (4 LED meters). BGM/Announce level control function/ Automatic sensor input reference level measuring function/ Sensor input reference level fine adjustment function/ Maximum output signal level control: -15 to 0dB/ Minimum output signal level control: -18 to -3dB/ Sample time setting: 10 s, 20 s, 30 s, 1 min, 5 min/ Gain ratio setting (Ambient noise; Output signal level) 6: 3, 5: 3, 4: 3, 3: 3, 3: 4, 3: 5, 3:6/ Ambient noise measuring frequency setting: 20Hz – 20kHz, 3 pointsMaximum Output Signal Level Control Function: -12, -6, 0, +4, +6, +12, +18, +24dB*Input Level Indicator: 8 LEDs indicatorOutput Level Indicator: 8 LEDs indicator

Other Feature: Phantom power switch (sensor input), Key lock function, Ground lift switch (INPUT 1, INPUT 2), Input/Output bypass function in power offOperating Temperature: 0°C to +40°COperating Humidity: Under 90% RH (no condensation)Finish: Pre-coated steel plate, black, 30% glossDimensions: 482 (W) × 44 (H) × 303 (D)mm, EIA rack mount Weight: 3.7kgAccessory: Power cord (2m) × 1, Removable terminal plug (4 pins) ×1, Removable terminal plug (3 pins) × 5

*0dB = 0.775V

Power Source: 120V AC, 50/60HzPower Consumption: 11WInput Impedance: 10kΩOutput Impedance: 600ΩFrequency Response: 20Hz – 20kHz, ±1dBMax. Input Level: +20dB* at 1kHzMax. Output Level: +20dB* with 600Ω loadTHD: 0.01% or less at 1kHz (all sliders at 0 position, rated output)Equalization Center Frequency: 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz, 315Hz, 400Hz, 500Hz, 630Hz, 800Hz, 1kHz, 1.25kHz, 1.6kHz, 2kHz, 2.5kHz, 4kHz, 5kHz, 6.3kHz, 8kHz, 10kHz, 12.5kHz, 16kHzControl Equalizer Sliders: ±12dB

Input Level Control: ±12dB Highpass Filter: 12dB per octave (Adjustable cutoff frequency: 15 – 300Hz)Lowpass Filter: 12dB per octave/6dB per octave(adjustable cutoff frequency: 2.5kHz – 30kHz)Hum and Noise: -94dB (EQ in, all sliders at 0 position, 20Hz – 20kHz B.P.F.)Finish: Panel: Aluminum, black/Case: Steel, dark grayDimensions: 482.6 (W) × 88.4 (H) × 317.2 (D)mmWeight: 4.5kg

* 0dB = 0.775V

Power Source: 220 – 240V AC, 50/60HzPower Consumption: 11W (120V version); 13W (220 to 240V version)Input: +4dB* 30kΩ (GAIN: 0dB), unbalanced, phone-jack and screw terminalOutput: +4dB* 1kΩ, unbalanced, phone-jack and screw terminalMax. Input Level: +32dB (GAIN: -12dB)Max. Output Level: +20dBFrequency Response: +1dB, -2dB (20 – 20,000Hz)THD: 0.01% or less at 1kHz (rated output)Equalization Center Frequency: 40Hz, 63Hz, 100Hz, 160Hz, 250Hz, 400Hz, 630Hz, 1kHz, 1.6kHz, 2.5kHz, 4kHz, 6.3kHz, 10kHz, 16kHz

Control Equalizer Sliders: Boost: +12dB, +6dBCut: -12dB, -6dB (switchable)Gain Range: ±12dB Highpass Filter: -12dB per octave (adjustable cutoff frequency: 15Hz – 300Hz)Hum and Noise (IHF-A): -98dB* (EQ: ON, HPF: 15Hz, GAIN: 0dB, in, all sliders at 0 position)Finish: Front panel: Aluminum, black/Case: Steel, blackDimensions: 483 (W) × 46 (H) × 311 (D)mmWeight: 3.8kgAccessory: Security cover × 1, Security cover fixing screw × 2, Rack mounting screw × 4, Rubber foot × 4, Blind label × 1, Power cord (2m) × 1

* 0dB = 0.775V

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

ts

Digital Ambient Noise Controller

DP-SP3(CE/CU version) Digital Speaker Processor

Power Source: 220 – 230V AC (CE version)/100 – 120V AC(CU version), 50/60HzPower Consumption: 25WFrequency Response: 20Hz – 20kHz, ±1dBSampling Frequency: 96kHzDynamic Range: 110dB or moreDistortion: 0.03% or less, 1kHz, +4dB* input/output20Hz – 20kHz BPFCrosstalk: -80dB or less, 1kHzInput: 2 channels, +4dB* (Max. +24dB*), 10kΩ, electronically balanced, removable terminal block (3P)Output: 6 channels, +4dB* (Max. +24dB*), applicable load 600Ωor more, electronically-balanced, removable terminal block (3P)A/D Converter: 24 bitsD/A Converter: 24 bitsPreset Memory: 16

Network: Network I/F: 1 channel of 10BASE-T/100BASE (auto-negotiation), RJ45 connector, connection via switching hub/Network protocol: TCP/IP/ Connection cable: Shielded Cat. 5 orhigher twisted pair cable for LAN (Cat. 5-STP or better)/ Maximumcable length: 100m (between DP-SP3 and switching hub)

Operating Temperature: 0°C to +40°COperating Humidity: 90% RH (no condensation)Finish: Panel: Aluminum hairline, black/ Case: Surface-treated steel plateDimensions: 482 (W) × 44 (H) × 288.7 (D)mmWeight: 3.1kgAccessory: Power cord (2m) × 1, Removable terminal plug (3P) × 8, Removable terminal plug (5P) × 1, CD-ROM (containing setup software) × 1

*0dB = 0.775V

Personal Computer RequirementsRequirements: CPU: Intel Pentium4, 1.0GHz or faster/ Memory:Windows XP/512MB or more, Other OS/1.0GB or more/ Display: 1024 × 768 resolution or higher/ Free hard Disk Space: 16MB or more. however 600MB or more is required for the 32-bit version or 1.5GB or more for the 64-bit version when "NET Framework" is not yet installed/ Optical Driver: CD-ROM drive/ Network Adapter: 10BASE-T or faster connectionOS: Windows XP SP3 or later, Windows Vista (32/64-bit) SP1 orlater, Windows 7 (32/64-it edition)Required Component: NET Framework 4 Client Profile

*Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.*Pentium is a registered trademark of Intel Corporation.*Other company names and products are also trademarks of individual companies

Signal Processing SectionEqualizer/Filter: Parametric equalizer: 20Hz – 20kHz, ±12dB,Q: 0.267 – 69.249Filter: High-pass filter 20Hz – 20kHz, 6dB/oct, 12dB/octLow-pass filter; 20Hz – 20kHz, 6dB/oct, 12dB/octNotch filter; 20Hz – 20kHz, Q: 8.561 – 69.249All-pass filter; 20Hz – 20kHz, Q: 0.267 – 69.249High-shelving filter; 20 – 20kHz, ±12dBLow-shelving filter; 20 – 20kHz, ±12dBHorn equalizer; 20kHz, 0 – 18dB in 0.5dB stepsCrossover: 2 ways, 3 ways, 4 waysCrossover filter: 20Hz–20kHz, 6dB/oct, 12dB/oct, ±12dB,polarity switchableDelay: 0 –170.656ms in 0.01ms stepsCompressor: Threshold: -20 to +20dB* in 1dB stepsRatio: 1:1, 1.1:1,1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1,4:1, 7:1, 8:1, 10:1, 12:1, 20:1, ∞:1 Attack time: 0.2ms – 5s,Release time: 10ms – 5s Gain: -70 to +10dBDelay: Delay time: 0 – 682.656ms in 0.01ms stepsMatrix: 2 × 6Crosspoint Gain: -∞ to 0dB in 1dB steps

Function: Input PAD (-16dB) control, analog output attenuator(-∞ to 0dB in 1dB steps) control, EQ characteristic library for TOA speakers, input/output level indicator (4-point LED indicator), output MUTE switch × 6ControlContact Inputs: 4 channels, open voltage: 5V DC, short-circuitcurrent: 5mA, removable terminal block (5P), control function:preset memory selection, volume control, and mute


Type A Series

5554

Pro-Sound Speakers

SR-A12LEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: Low fre-quency; 450W, High frequency; 180WRated Impedance: Low frequency; 8Ω, High frequency; 16ΩSensitivity (1W, 1m): Low frequency; 98dB, High frequency; 110dBFrequency Response: 50 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 1,000Hz (when using DP-0206 option)Directivity Angle: Horizontal: 90°/Vertical: 5°Speaker Component: Low frequency: 30cm cone-type, High frequency: Wave front control horn 90° (horizontal) × 5° (vertical) + compression driver × 2Input Connector: M5 screw terminal, distance between barri-ers: 12.2mm and Neutrik NL4MP × 2Finish: Enclosure: Plywood, black paint/Front grille: Punched steel plate, black, acrylic paintDimensions: 740(W) × 433(H) × 469(D) mmWeight: 49kg (including accessories)Accessory: Joint plate × 2, Joint plate mounting bolt (M10) × 16Option: Rigging frame: SR-RF12, Digital processor: DP-0206

SR-A12L/SR-A12LWPLine Array Speaker System

SR-A12LWPEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: Low fre-quency; 450W, High frequency; 180WRated Impedance: Low frequency; 8Ω, High frequency; 16Ω Sensitivity (1W, 1m): Low frequency; 98dB, High frequency; 110dBFrequency Response: 50 – 20,000Hz (when using DP-0206 option) Crossover Frequency: 1,000Hz (when using DP-0206 option)Directivity Angle: Horizontal: 90°/Vertical: 5°Speaker Component: Low frequency: 30cm cone-type, High frequency: Wave front control horn 90° (horizontal) × 5° (verti-cal) + compression driver × 2Connected Cable: Direct cable withdrawal from internal speaker: ø8.6mm, conductor cross section: 1.25mm2, 4-core cable, 3mWater Protection: IPX4 Operation Temperature: -10°C to +50°CFinish: Enclosure: Plywood, black, urethane coating/Front grille: Punched stainless steel, black paintDimensions: 740(W) × 433(H) × 469(D) mm (excluding connected cable)Weight: 51kg (including accessories)Accessory: Joint plate × 2, Joint plate mounting bolt (M10) × 16 Option: Rigging frame: SR-RF12WP, Digital processor: DP-0206

SR-A12SWPEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: Low fre-quency; 450W, High frequency; 180WRated Impedance: Low frequency; 8Ω, High frequency; 16ΩSensitivity (1W, 1m): Low frequency; 98dB, High frequency; 109dBFrequency Response: 50 – 20,000Hz (when using DP-0206 option) Crossover Frequency: 1,000Hz (when using DP-0206 option)Directivity Angle: Horizontal: 90°/Vertical: 15°Speaker Component: Low frequency: 30cm cone-type, High frequency: Wave front control horn 90° (horizontal) × 15° (ver-tical) + compression driver × 2Connected Cable: Direct cable withdrawal from internal speaker: ø8.6mm, conductor cross section: 1.25mm2, 4-core cable, 3mWater Protection: IPX4Operation Temperature: -10°C to +50°CFinish: Enclosure: Plywood, black, urethane coating/Front grille: Punched stainless steel, black paintDimensions: 740(W) × 433(H) × 467(D) mm (excluding connected cable)Weight: 48kg (including accessories)Accessory: Joint plate × 2, Joint plate mounting bolt (M10) × 16Option: Rigging frame: SR-RF12WP, Digital processor: DP-0206

SR-A12SEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: Low fre-quency; 450W, High frequency; 180WRated Impedance: Low frequency; 8Ω, High frequency; 16ΩSensitivity (1W, 1m): Low frequency; 98dB, High frequency; 109dBFrequency Response: 50 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 1,000Hz (when using DP-0206 option)Directivity Angle: Horizontal: 90°/Vertical: 15°Speaker Component: Low frequency: 30cm cone-type, High frequency: Wave front control horn 90° (horizontal) × 15° (verti-cal) + compression driver × 2Input Connector: M5 screw terminal, distance between barri-ers: 12.2mm and Neutrik NL4MP × 2 Finish: Enclosure: Plywood, black paint/Front grille: Punched steel plate, black, acrylic paintDimensions: 740(W) × 433(H) × 467(D) mmWeight: 47kg (including accessories)Accessory: Joint plate × 2, Joint plate mounting bolt (M10) × 16Option: Rigging frame: SR-RF12, Digital processor: DP-0206

SR-A12S/SR-A12SWPLine Array Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous program: 720WRated Impedance: 8ΩSensitivity (1W, 1m): 95dBFrequency Response: 40 – 400Hz (when using DP-0206 option)Crossover Frequency: 80Hz (when using DP-0206 option)Speaker Component: 46cm cone-type Input Connector: M5 screw terminal, distance between barri-ers: 12.2mm and Neutrik NL4MP × 2Finish: Enclosure: Plywood, black paint/Front grille: Punched steel plate, black acrylic paintDimensions: 740(W) × 573(H) × 698(D) mmWeight: 66kg (including accessories)Accessory: Joint plate × 2, Joint plate mounting bolt (M10) × 16Option: Rigging frame: SR-RF12, Digital processor: DP-0206

SR-A18BSubwoofer

* SYNC-Drive(TM) is the technology of TOA's wave-front control.

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Type C Series

55

SR-C8LEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: 360W (sigle-amp mode)/Low frequency: 360W, High frequency: 180W (bi-amp mode)Rated Impedance: 16Ω (single-amp mode)/ Low frequency: 16Ω, High frequency: 16Ω (bi-amp mode)Sensitivity (1W, 1m): 98 dB (single-amp mode)/Low frequency; 95dB, High frequency; 110dB (bi-amp mode)Frequency Response: 65 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 1,600Hz (when using DP-0206 option)Directivity Angle: Horizontal: 110°/Vertical: 5°Speaker Component: Low frequency: 20cm cone-type, High frequency: Wave front control horn 110° (horizontal) × 5° (verti-cal) + compression driver × 2Input Connector: M5 screw terminal, distance between barri-ers: 12.2mm and Neutrik NL4MP × 2Finish: Enclosure: Plywood, black urethane paint/Front grille: Punched steel plate, black, paintDimensions: 526.6(W) × 293(H) × 296(D) mmWeight: 17kgAccessory: M8 connection bolt × 4Option: Cluster bracket: SR-CL8, Rigging frame: SR-RF8, Tilt joint bracket: SR-TP8, Digital processor: DP-0206

SR-C8L/SR-C8LWPLine Array Speaker System

SR-C8LWPEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: 360W (sigle-amp mode)/Low frequency: 360W, High frequency: 180W (bi-amp mode)Rated Impedance: 16Ω (single-amp mode)/ Low frequency: 16Ω, High frequency: 16Ω (bi-amp mode)Sensitivity (1W, 1m): 98 dB (single-amp mode)/Low frequency; 95dB, High frequency; 110dB (bi-amp mode)Frequency Response: 65 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 1,600Hz (when using DP-0206 option)Directivity Angle: Horizontal: 110°/Vertical: 5°Speaker Component: Low frequency: 20cm cone-type, High frequency: Wave front control horn 110° (horizontal) × 5° (ver-tical) + compression driver × 2Connected Cable: Direct cable withdrawal from internal speaker: ø8.6mm, conductor cross section: 1.25mm2, 4-core cable, 3mDust/Water Protection: IPX4 Finish: Enclosure: Plywood, black, urethane coating/Front grille: Punched stainless steel, black paintDimensions: 526.6(W) × 293(H) × 296(D) mmWeight: 17kgAccessory: M8 connection bolt × 4Option: Rigging frame: SR-RF8WP, Digital processor: DP-0206

SR-C8SWPEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: 360W (sigle-amp mode)/Low frequency: 360W, High frequency: 180W (bi-amp mode)Rated Impedance: 16Ω (single-amp mode)/ Low frequency: 16Ω, High frequency: 16Ω (bi-amp mode)Sensitivity (1W, 1m): 98dB (single-amp mode)/Low frequency; 95dB, High frequency; 110dB (bi-amp mode)Frequency Response: 65 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 1,600Hz (when using DP-0206 option)Directivity Angle: Horizontal: 110°/Vertical: 15°Speaker Component: Low frequency: 20cm cone-type, High frequency: Wave front control horn 110° (horizontal) × 15° (vertical) + compression driver × 2Connected Cable: Direct cable withdrawal from internal speaker: ø8.6mm, conductor cross section: 1.25mm2, 4-core cable, 3mDust/Water Protection: IPX4 Finish: Enclosure: Plywood, black, urethane coating/Front grille: Punched stainless steel, black paintDimensions: 526.6(W) × 293(H) × 294(D) mmWeight: 16kgAccessory: M8 connection bolt × 4Option: Rigging frame: SR-RF8WP, Digital processor: DP-0206

SR-C8SEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: 360W (sigle-amp mode)/Low frequency: 360W, High frequency: 180W (bi-amp mode)Rated Impedance: 16Ω (single-amp mode)/ Low frequency: 16Ω, High frequency: 16Ω (bi-amp mode)Sensitivity (1W, 1m): 98dB (single-amp mode)/Low frequency; 95dB, High frequency; 110dB (bi-amp mode)Frequency Response: 65 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 1,600Hz (when using DP-0206 option)Directivity Angle: Horizontal: 110°/Vertical: 15°Speaker Component: Low frequency: 20cm cone-type, High frequency: Wave front control horn 110° (horizontal) × 15° (vertical) + compression driver × 2Input Connector: M5 screw terminal, distance between barri-ers: 12.2mm and Neutrik NL4MP × 2Finish: Enclosure: Plywood, black urethane paint/Front grille: Punched steel plate, black, paintDimensions: 526.6(W) × 293(H) × 294(D) mmWeight: 16kgAccessory: M8 connection bolt × 4Option: Cluster bracket: SR-CL8, Rigging frame: SR-RF8, Tilt joint bracket: SR-TP8, Digital processor: DP-0206

SR-C8S/SR-C8SWPLine Array Speaker System

SR-C15BEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: 450WRated Impedance: 8ΩSensitivity (1W, 1m): 93dBFrequency Response: 40 – 400Hz (when using DP-0206 option)Crossover Frequency: 125Hz (when using DP-0206 option)Speaker Component: 38cm cone-type Input Connector: M5 screw terminal, distance between barri-ers: 12.2mm and Neutrik NL4MP × 2Finish: Enclosure: Plywood, black urethane paint/Front grille: Punched steel plate, black paintDimensions: 526.6(W) × 594.8(H) × 550(D) mmWeight: 41kgAccessory: M8 connection bolt × 4Option: Rigging frame: SR-RF8, Digital processors: DP-0206

SR-C15B/CR-C15BWPSubwoofer

SR-C15BWPEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: 450WRated Impedance: 8ΩSensitivity (1W, 1m): 93dBFrequency Response: 40 – 400Hz (when using DP-0206 option)Crossover Frequency: 125Hz (when using DP-0206 option)Speaker Component: 38cm cone-type Connected Cable: Direct cable withdrawal from internal speaker: ø8.6mm, conductor cross section: 1.25mm2, 4-core cable, 3mOperating Temperature: -10°C to +50°C Dust/Water Protection: IPX4 Finish: Enclosure: Plywood, black, urethane coating/Front grille: Punched stainless steel, black paintDimensions: 526.6(W) × 594.8(H) × 550(D) mmWeight: 41kgAccessory: M8 connection bolt × 4Option: Rigging frame: SR-RF8WP, Digital processor: DP-0206

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Optional Accessory

Type S Series

56

SR-S4L/SR-S4LWPLine Array Speaker System

SR-S4S/SR-S4SWPLine Array Speaker System

SR-S4LEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: 600W(single amp mode)/Low: 240W, High:240W (bi-amp mode)Rated Impedance: 8ΩSensitivity (1W, 1m): 94dBFrequency Response: 70 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 3,500HzDirectivity Angle: Horizontal: 90°/Vertical: 0° (within the range of speaker height)Speaker Component: Low frequency: 10cm cone-type × 8, High frequency: 2.5cm balanced dome-type × 24Input Connector: M5 screw terminal, distance between barri-ers: 12.2mm and Neutrik NL4MP × 2Finish: Enclosure: MDF, white, paint/Front grille: Punched steel plate, white, acrylic paint Dimensions: 160(W) × 895(H) × 255(D) mmWeight: 16kgAccessory: Bi-amplifier drive rating label × 1, Bi-amplifier drive input indication label × 1Option: Matching transformer: MT-S0601, Extension plate: SR-EP4, Flying bracket: SR-FB4, Wall mounting bracket: SR-WB4, Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4, Protection pad: SR-PP4, Floor stand: SR-FS4, Digital processor: DP-0206

SR-S4LWPEnclosure: Sealed typePower Handling Capacity: Continuous program: 600W(single amp mode)/Low: 240W, High:240W (bi-amp mode)Rated Impedance: 8ΩSensitivity (1W, 1m): 94dBFrequency Response: 70 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 3,500HzDirectivity Angle: Horizontal: 90°/Vertical: 0° (within the range of speaker height)Speaker Component: Low frequency: 10cm cone-type × 8, High frequency: 2.5cm balanced dome-type × 24Connected Cable: Direct cable withdrawal from internal speaker: ø8.6mm, conductor cross section: 1.25mm2, 4-core cable, 3mDust/Water Protection: IPX4 Operation Temperature: -10°C to +50°CFinish: Enclosure: Plywood, white, urethane coating/Front grille: Punched stainless steel, white, paintDimensions: 160(W) × 895(H) × 255(D) mm (excluding connected cable)Weight: 16kgAccessory: Bi-amplifier drive rating label × 1, Bi-amplifier drive input indication label × 1Option: Matching transformer: MT-S0601, Extension plate: SR-EP4WP, Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4, Digital processor: DP-0206

SR-S4SWPEnclosure: Sealed typePower Handling Capacity: Continuous program: 600W(single amp mode)/Low: 240W, High:240W (bi-amp mode)Rated Impedance: 8ΩSensitivity (1W, 1m): 93dBFrequency Response: 70 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 3,500HzDirectivity Angle: Horizontal: 90°/Vertical: 10°Speaker Component: Low frequency: 10cm cone-type × 8, High frequency: 2.5cm balanced dome-type × 24Connected Cable: Direct cable withdrawal from internal speaker: ø8.6mm, conductor cross section: 1.25mm2, 4-core cable, 3mDust/Water Protection: IPX4Operation Temperature: -10°C to +50°CFinish: Enclosure: Plywood, white, urethane coating/Front grille: Punched stainless steel, white, paint Dimensions: 160(W) × 892(H) × 303(D) mm (excluding con-nected cable)Weight: 16kgAccessory: Bi-amplifier drive rating label × 1, Bi-amplifier drive input indication label × 1Option: Matching transformer: MT-S0601, Extension plate: SR-EP4WP, Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4, Digital processor: DP-0206

SR-S4SEnclosure: Bass-reflex typePower Handling Capacity: Continuous program: 600W (single amp mode)/Low: 240W, High:240W (bi-amp mode)Rated Impedance: 8ΩSensitivity (1W, 1m): 93dBFrequency Response: 70 – 20,000Hz (when using DP-0206 option)Crossover Frequency: 3,500HzDirectivity Angle: Horizontal: 90°/Vertical: 10° Speaker Component: Low frequency: 10cm cone-type × 8, High frequency: 2.5cm balanced dome-type × 24Input Connector: M5 screw terminal, distance between barri-ers: 12.2mm and Neutrik NL4MP × 2Finish: Enclosure: MDF, white, paint/Front grille: Punched steel plate, white, acrylic paintDimensions: 160(W) × 892(H) × 303(D) mmWeight: 16kgAccessory: Bi-amplifier drive rating label × 1, Bi-amplifier drive input indication label × 1Option: Matching transformer: MT-S0601, Extension plate: SR-EP4, Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4, Protection pad: SR-PP4, Digital processor: DP-0206

MT-S0601Matching Transformer

Rated Input Power: 60WInput Impedance: 100V Line; 170Ω (60W), 330Ω (30W), 670Ω (15W)/70V Line; 83Ω (60W), 170Ω (30W), 330Ω (15W), 670Ω (7.5W)Output Impedance: 8ΩWeight: 1.2kg

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Optional Accessory

Type H Series

Type T Series

5756

SR-T5Line Array Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 250W, Continuous program: 750WRated Impedance: 8ΩSensitivity: 96dB (1W, 1m equivalent, measured at 4m)Frequency Response: 70Hz – 20kHzCrossover Frequency: 3kHzDirectivity Angle: Horizontal: 100°/Vertical: 35°Speaker Component: Low frequency: 13cm cone-type × 8/High frequency: Balanced dome type × 24Recommended Installation Height: 4 – 5.5m (Speaker top, when installed in sport facilities 30cm in length)Adjustable Angle Range: Downward: 0°, 1°, 2°, 3° (when the supplied mounting bracket is used)/Horizon-tal (left or right): 5°, 10° (when the optional SR-PB5 Wall Pan Bracket is used)Input Terminal: M5 screw terminal, distance between barriers: 12.2mmFinish: Enclosure: Plywood, black, urethane paint/Baffle: Polypropylene, black/Punched net: Steel plate, black, acrylic paint/Mounting bracket: Steel plate, black, acrylic paintDimensions: 310(W) 1,239(H) × 341(D) mmWeight: 29kg (including accessories)

Accessories: Mounting bracket A × 1, Mounting bracket B × 1, Bracket mounting bolt × 6, Side cover × 5, Side cover mounting screw × 10, Eye bolt × 1, Safety wire × 1Option: Wall pan bracket: SR-PB5 (to be used in conjunction with the supplied mounting bracket), Matching transformer: MT-S0601

SR-H2LLine Array Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous program: 180WRated Impedance: 8ΩSensitivity: 92dB (1W, 1m equivalent, measured at 4m)Frequency Response: 80Hz – 18kHz (when using an optional digital processor)Directivity Angle: Horizontal: 90°/Vertical: 0° (within the range of speaker height)Speaker Component: 7cm cone-type × 9Input Connector: Removable input connectorFinish: Enclosure: MDF, white, paint/Front grille: Punched steel plate, white, acrylic paint Dimensions: 84(W) × 668.4(H) × 115(D) mmWeight: 4.4kgOption: Matching transformer: MT-S0301, Extension plate: SR-EP3, Flying bracket: SR-FB3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Speaker stand adapter: SR-SA3 (Applicable stand: ST-34B), Digital processor: DP-0206

SR-H2SLine Array Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous program: 180WRated Impedance: 8ΩSensitivity: 90dB (1W, 1m equivalent, measured at 4m)Frequency Response: 90Hz – 17kHz (when using an optional digital processor)Directivity Angle: Horizontal: 90°/Vertical: 20°Speaker Component: 7cm cone-type × 9Input Connector: Removable input connectorFinish: Enclosure: MDF, white, paint/Front grille: Punched steel plate, white, acrylic paint Dimensions: 84(W) × 663.4(H) × 115(D) mmWeight: 4.2kgOption: Matching transformer: MT-S0301, Extension plate: SR-EP3, Flying bracket: SR-FB3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Speaker stand adapter: SR-SA3 (Applicable stand: ST-34B), Digital processor: DP-0206

SR-H3LLine Array Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous program: 360WRated Impedance: 8ΩSensitivity: 95dB (1W, 1m equivalent, measured at 4m)Frequency Response: 110Hz – 18kHz (when using an optional digital processorDirectivity Angle: Horizontal: 90°/Vertical: 0° (within the range of speaker height)Speaker Component: 7cm cone-type × 16Input Connector: Removable input connectorFinish: Enclosure: MDF, white, paint/Front grille: Punched steel plate, white, acrylic paint Dimensions: 84(W) × 1,186.4(H) × 115(D) mmWeight: 7.6kgOption: Matching transformer: MT-S0301, Extension plate: SR-EP3, Flying bracket: SR-FB3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Speaker stand adapter: SR-SA3 (Applicable stand: ST-34B), Digital processor: DP-0206

SR-H3SLine Array Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous program: 360WRated Impedance: 8ΩSensitivity: 92dB (1W, 1m equivalent, measured at 4m)Frequency Response: 90Hz – 17kHz (when using an optional digital processor)Directivity Angle: Horizontal: 90°/Vertical: 20°Speaker Component: 7cm cone-type × 16Input Connector: Removable input connectorFinish: Enclosure: MDF, white, paint/Front grille: Punched steel plate, white, acrylic paint Dimensions: 84(W) × 1,177.2(H) × 157(D) mmWeight: 7.9kgOption: Matching transformer: MT-S0301, Extension plate: SR-EP3, Flying bracket: SR-FB3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Speaker stand adapter: SR-SA3 (Applicable stand: ST-34B), Digital processor: DP-0206

Rated Input Power: 30WPrimary Side: 100V line: 330Ω (30W), 1kΩ (10W)/70V line: 170Ω (30W), 330Ωs (15W), 1kΩ (5W)Secondary Side: 8ΩWeight: 370g


•ForCR-H2L,SR-H2S, SR-H3L and SR-H3S

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t


58

HX-5BEnclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 200W, Continuous program: 600WRated Impedance: 8ΩSensitivity (1W, 1m): 96dB (60° mode), 97dB (45° mode), 98dB (30° mode), 99dB (15° mode)*Frequency Response: 70Hz – 20kHz (-10dB) (60° mode), 75Hz – 20kHz (-10dB) (45° mode), 80Hz – 20kHz (-10dB) (30° mode), 85Hz – 20kHz (-10dB) (15° mode)Crossover Frequency: 4kHzDirectivity Angle: Horizontal: 100° (over 2kHz)/Vertical: 60° (800Hz or more), 45° (1.2kHz or more), 30° (1.6kHz or more), 15° ( 3.2kHz or more) variableSpeaker Component: Low frequency: 12cm cone-type × 4, High frequency: Balanced dome-type × 12Input Connector: Speakon NL4MP × 2 and M4 screw terminalFinish: Enclosure: Polypropylene, blackPunched net: Surface-treated steel plate, blackDimensions: 408(W) × 546(H) × 342(D) mmWeight: 16kgAccessory: Hanging bracket × 2, Hex. wrench × 1Option: Matching transformer: MT-200, Speaker stand adapter: HY-ST1, Speaker mounting bracket: HY-PF1B, HY-CW1B, HY-WM1B, HY-WH2B, HY-CN1B

HX-5B/HX-5B-WPCompact Array Speaker System

HX-5B-WPEnclosure: Sealed typePower Handling Capacity: Continuous pink noise: 200W, Continuous program: 600WRated Impedance: 8ΩSensitivity (1W, 1m): 96dB (60° mode), 97dB (45° mode), 98dB (30° mode), 99dB (15° mode)*Frequency Response: 95Hz – 20kHz (-10dB) (60° mode), 100Hz – 20kHz (-10dB) (45° mode), 10Hz5 – 20kHz (-10dB) (30° mode), 110Hz – 20kHz (-10dB) (15° mode)Crossover Frequency: 4kHzDirectivity Angle: Horizontal: 100° (2kHz or more)/Vertical: 60° (800Hz or more), 45° (1.2kHz or more), 30° (1.6kHz or more), 15° (3.2kHz or more) variableSpeaker Component: Low frequency: 12cm cone-type × 4, High frequency: Balanced dome-type × 12Speaker Cord: 2-core cabtyre cord with diameter of 6mmDust/Water Protection: IPX4 (Install with the every speaker module downward)Operation Temperature: -15°C to +50°CFinish: Enclosure: Polypropylene, blackPunched net: Surface-treated steel plate, blackDimensions: 408(W) × 546(H) × 342(D) mmWeight: 16kgAccessory: Hanging bracket × 2, Hex. wrench × 1Option: Matching transformer: MT-200, Speaker mounting bracket: HY-PF1WP, HY-CW1WP, HY-WM1WP, HY-WH2WP, HY-CN1B-WP

HX-5WEnclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 200W, Continuous program: 600WRated Impedance: 8ΩSensitivity (1W, 1m): 96dB (60° mode), 97dB (45° mode), 98dB (30° mode), 99dB (15° mode)*Frequency Response: 70Hz – 20kHz (-10dB) (60° mode), 75Hz – 20kHz (-10dB) (45° mode), 80Hz – 20kHz (-10dB) (30° mode), 85Hz – 20kHz (-10dB) (15° mode)Crossover Frequency: 4kHzDirectivity Angle: Horizontal: 100° (over 2kHz)/Vertical: 60° (800Hz or more), 45° (1.2kHz or more), 30° (1.6kHz or more), 15° ( 3.2kHz or more) variableSpeaker Component: Low frequency: 12cm cone-type × 4, High frequency: Balanced dome-type × 12Input Connector: Speakon NL4MP × 2 and M4 screw terminalFinish: Enclosure: Polypropylene, whitePunched net: Surface-treated steel plate, whiteDimensions: 408(W) × 546(H) × 342(D) mmWeight: 16kgAccessory: Hanging bracket × 2, Hex. wrench × 1Option: Matching transformer: MT-200, Speaker stand adapter: HY-ST1, Speaker mounting bracket: HY-PF1W, HY-CW1W, HY-WM1W, HY-WH2W, HY-CN1W

HX-5W-WPEnclosure: Sealed typePower Handling Capacity: Continuous pink noise: 200W, Continuous program: 600WRated Impedance: 8 ohmsSensitivity (1W, 1m): 96dB (60° mode), 97dB (45° mode), 98dB (30° mode), 99dB (15° mode)Frequency Response: 95 – 20,000Hz (-10dB) (60° mode), 100 – 20,000Hz (-10dB) (45° mode), 105 – 20,000Hz (-10dB) (30° mode), 110 – 20,000Hz (-10dB) (15° mode)Crossover Frequency: 4kHzDirectivity Angle: Horizontal: 100° (over 2000Hz)/Vertical: 60° (over 800Hz), 45° (over 1.2kHz), 30° (over 1.6kHz), 15° (over 3.2kHz) variableSpeaker Component: Low frequency: 12cm cone-type × 4, High frequency: Balanced dome-type × 12Speaker Cord: 2-core cabtyre cord with diameter of 6mmDust/Water Protection: IPX4 (Install with the every speaker module downward)Operation Temperature: -15°C to +50°CFinish: Enclosure: Polypropylene, whitePunched net: Surface-treated steel plate, whiteDimensions: 408(W) × 546(H) × 342(D) mmWeight: 16kgAccessory: Hanging bracket × 2, Hex. wrench × 1Option: Matching transformer: MT-200, Speaker mounting bracket: HY-PF1WP, HY-CW1WP, HY-WM1WP, HY-WM2WP, HY-CN1W-WP

HX-5W/HX-5W-WPCompact Array Speaker System

FB-120B/FB-120WSubwoofer

Power Handling Capacity: Continuous pin noise: 200W, Continuous program: 600WRated Impedance: 8ΩSensitivity (1W, 1m): 90dB at installation in free sound field/96dB at installation in 1/2 free sound fieldFrequency Response: 40Hz – 1,2kHz (-10dB)Speaker Component: 30cm cone-typeInput Terminal: Speakon NL4MP × 2 and M4 screw terminal, distance between barriers, 11mmFinish: FB-120B: Enclosure: Plywood/Punched net: Steel plate, black, paint/FB-120W: Enclosure: Plywood/Punched net: Steel plate, white, paintDimensions: 408(W) × 408(H) × 450(D) mmWeight: 15kgOption: FB-120B: Speaker rigging frame: HY-PF1BFB-120W: Speaker rigging frame: HY-PF1W Optional Accessory

MT-200Matching Transformer

Rated Input Power: 200WPrimary Side: 100V line: 50Ω (200W), 83Ω (120W), 167Ω (60W)/70V line: 25Ω (200W), 50Ω (100W), 83Ω (60W), 167 ohms (30W)Secondary Side: 8ΩDust/Water Protection: IPX4 (the tilt angle must be within 45°)Dimensions: 164 (W) × 141 (H) × 129 (D)mmWeight: 2.8kgAccessory: Speaker mounting bolt (8M) with washer × 2

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

SR (Z-Drive) Series SpeakersFull-Range Cabinet Speakers


Subwoofers

5958

SR-F1DSpeaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 120W (Low frequency)*1, 80W (High frequency)*2/Continuous program: 360W (Low frequency), 240W (High frequency)Rated Impedance: Low frequency: 8Ω, High frequency: 16ΩSensitivity (1W, 1m): Low frequency: 98dB High frequency: 110dBFrequency Response: 70 – 20,000Hz at DP-0206's useCrossover Frequency: 1,000Hz at DP-0206's useSpeaker Component: Low frequency: One 30cm dia cone-type/High frequency: CD horn (60° horizontal by 40° vertical) plus compression driverInput Connector: Neutrik NL4MPRFinish: Enclosure: FRP coating, Gray/Front grille: Black-paintedDimensions: 390(W) × 619(H) × 364(D) mmWeight: 38kg

*1 Bard limited (50 to 1,000Hz) pink noise signal (24 hrs.)*2 Bard limited (1,000 to 20,000Hz) pink noise signal (24 hrs.)

Enclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 150W RMS* × 2, Continuous program: 450W × 2Rated Impedance: 8Ω × 2Sensitivity (1W, 1m): 96dBFrequency Response: 35Hz – 1kHzCrossover Frequency: 125kHz at DP-0206's useSpeaker Component: 38cm dia cone-type × 2Input Connector: Neutrik NL4MPRFinish: Enclosure: Urethane paint, gray/Front grille: Steel plate paint, blackDimensions: 830(W) × 631(H) × 607(D) mmWeight: Approx.77kg

* Bard limited (40 to 1,000Hz) pink noise signal (24 hrs.)

SR-F09Speaker System for Mobile Application

Enclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 200W*, Continuous program: 600WRated Impedance: 8ΩSensitivity (1W, 1m): 100dBFrequency Response: 70Hz – 20kHz (when DP-0206 is used) Crossover Frequency: 1kHz (passive network)Speaker Component: Low frequency: 30cm cone speaker, High frequency: CD horn (60° horizontal × 40° vertical) fitted with compression driverInput Connector: Neutrik NL4MP × 2 and M5 screw terminal (distance between barriers: 12.2mm)Finish: Enclosure: Plywood, black paint, Front grille: Steel plate, black acrylic paintDimensions: 390(W) × 619(H) × 364(D) mmWeight: 35kg

* 24hrs pink noise input (50Hz to 20kHz).

SR-L09Subwoofer

Enclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 300W*, Continuous program: 900WRated Impedance: 4ΩSensitivity (1W, 1m): 96dBFrequency Response: 35Hz – 1kHzCrossover Frequency: 125Hz (when DP-0206 is used)Speaker Component: Low frequency: 38cm cone-type × 2Input Connector: Neutrik NL4MP and M5 screw terminal, distance between barriers: 12.2mmFinish: Enclosure: Plywood, black paint, Front grille: Steel plate, black acrylic paintDimensions: 829 (W) × 629 (H) × 606 (D) mmWeight: 67kg


SR-M05LSR-M05RMonitor Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 150W*, Continuous program: 450WNominal Impedance: 8ΩSensitivity (1W, 1m): 99dBFrequency Response: 60Hz – 18kHzCrossover Frequency: 2kHz (passive)Speaker Component: Low Frequency; 25cm dia. cone-type/High Frequency; CD horn (40° horizontal by 40° vertical) fitted with compression driverInput Connector: Neutrik NL4MP × 2Finish: Enclosure; MDF, black, urethone coating/Front grille; Black, acrylic paintDimensions: 444 (H) × 274 (W) × 404 (D) mmWeight: 17.8kg

* Band Limited (50 to 20,000Hz) pink noise signal (24hrs.).

SR-L1BSuper Woofer

SR-F05Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous pink noise: 150W*, Continuous program: 450WNominal Impedance: 8ΩSensitivity (1W, 1m): 99dBFrequency Response: 60Hz – 18kHzSpeaker Component : Low Frequency; One 25cm dia. cone speaker/High Frequency; CD horn (90° horizontal by 40° vertical) plus titanium diaphragm compression driverCrossover Frequency: 2kHz (passive)Input Connector: Neutrik NL4MP × 2 and M5 screw terminal (distance between barriers: 13mmFinish: Enclosure: MDF dark gray, urethane coating/Front grille; Acrylic paint, BlackDimensions: 315 (W) × 444 (H) × 241 (D)mmWeight: 18kg


Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

ES Series Speakers2-Way Speakers

Flush Mount Ceiling Speakers


Optional Accessory

60

Enclosure: Bass-reflex typePower Handling Capacity: Continuous Pink Noise: 200W Continuous Program: 600WRated Impedance: 8ΩSensitivity (1W, 1m): 100dBFrequency Response: 70 – 20,000HzCrossover Frequency: 1,800HzSpeaker Component: Low Frequency; 38cm cone-type/ High Frequency; CD horn (90° horizontal × 60° vertical or 60° horizontal × 90° vertical) fitted with compression driverInput Terminal: Neutrik NL4MP × 2 and M5 screw terminal, distance between barriers; 12.2mmFinish: Enclosure; Plywood, black, urethane paint Grille; Steel plate, black, acrylic paintDimensions: 740 (W) × 450 (H) × 337 (D) mmWeight: 37kgOption: Mounting bracket: HY-0871CL, HY-0871WS

ES-08512-Way Speaker System

Enclosure: Bass-reflex typePower Handling Capacity: Continuous Pink Noise: 200W/Continuous Program: 600WRated Impedance: 8ΩSensitivity (1W, 1m): 97dBFrequency Response: 80Hz – 20kHzCrossover Frequency: 1.8kHzSpeaker Component: Low Frequency; 25cm cone-type/ High Frequency; CD horn (90° horizontal × 60° vertical or 60° horizontal × 90° vertical) fitted with compression driverInput Terminal: Neutrik NL4MP × 2 and M5 screw terminal, distance between barriers; 12.2mmFinish: Enclosure; Plywood, black, urethane paint Grille; Steel plate, black, acrylic paintDimensions: 580 (W) × 330 (H) × 255 (D)mmWeight: 20kgOption: Mounting bracket: HY-0851ST,HY-0852ST, HY-B081. HY-C0801

ES-08712-Way Speaker System

ES-C0651 High-Power 25cm Flush Mount Ceiling Speaker System

FG-C0651 Front Panel

Enclosure: Sealed enclosurePower Handling Capacity: Continuous Pink Noise; 60W/Continuous Program; 180WRated Impedance: 8ΩSensitivity (1W, 1m): 96dBFrequency Response: 80 – 20,000HzCrossover Frequency: 2.5kHz (passive network)Speaker Component: Low Frequency; 25cm woofer/High Frequency; CD horn plus compression driver (60° horizontal × 60° vertical)Input Terminal: Push-in terminal × 2Finish: Case; Wood, Black/Anchor Bracket; Surface treated steel plateDimensions: Mounting Hole; ø320mm Ceiling Thickness; 5 – 50mmWeight: 6.8kg (including anchor bracket)Optional Accessory: Front Panel: FG-C0651.Matching transformer: MT-S0601

Enclosure: Sealed enclosurePower Handling Capacity: ES-0422WP: Continuous Pink Noise; 80W Continuous Program; 240W/ES-0424WP: Continuous Pink Noise; 120W Continuous Program; 360W/ES-0426WP: Continuous Pink Noise; 120W Continuous Program; 360WRated Impedance: 8ΩSensitivity (1W, 1m): ES-0422WP: 91dB)/ES-0424WP: 95dB/ ES-0426: 96dBFrequency Response: 120Hz – 20kHzCrossover Frequency: 3kHzSpeaker Component: ES-0422WP: Low Frequency; 12cm dia. cone speaker × 2 High Frequency; CD horn fitted with compression driver (100° horizontal × 50° vertical)/ ES-0424WP: Low Frequency; 12cm dia. cone speaker × 4/ High Frequency; CD horn fitted with compression driver (100° horizontal × 50° vertical)/ES-0426WP: Low Frequency; 12cm dia. cone speaker × 6/ High Frequency; CD horn fitted with compression driver (100° horizontal × 50° vertical)Connected Cable: Direct Cable Withdrawal from Internal Speaker; 7.4mm in diameter/Conductor Cross Section; 1.25mm2, 2-core cable, 2mDust/Water Protection: IP55 Finish: Enclosure; Wood, white, paint(urethane-undercoated) Front Grille; Stainless steel, white, paintDimensions: ES-0422WP: 154 (W) × 438 (H) × 174 (D)mm /ES-0424WP: 154 (W) × 718 (H)× 174 (D)mm /ES-0426WP: 154 (W) × 998 (H) × 174 (D)mmWeight: ES-0422WP: 8.2kg/ES-0424WP: 12.4kg/ES-0426WP: 15.5kgOption: Wall Mounting Bracket: YS-0421WLMatching Transformer: MT-S0601

ES-0422WPES-0424WPES-0426WPEngineered-Sound Weatherproof Speaker System

ES-0422WP

ES-0424WP

ES-0426WP

Fitting Method: Spring-catch installationFinish: Baffle: Wood, White/Grille: Rolled steel plate, WhiteDimensions: ø360 × 12mm (exposed section)Weight: 400gUsable Speaker: ES-C0651


Rated Input Power: 60WInput Impedance: 100V Line; 170Ω (60W), 330Ω (30W), 670Ω (15W)70V Line; 83Ω (60W), 170Ω (30W), 330Ω (15W), 670Ω (7.5W)Output Impedance: 8ΩWeight: 1.2kg

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

H Series Speakers

6160

Enclosure: Sealed typePower Handling Capacity: 90W (continuous program/4Ω)/30W (continuous pink noise/4Ω)Rated Input: 12W (16Ω, high impedance)Rated Impedance: 4Ω or 16Ω/100V line; 830Ω (12W), 1.7kΩ (6W), 3.3kΩ (3W)/70V line; 420Ω (12W), 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 85dB at installation 1/2 free sound field (Measured by installing the unit in the center of a wall.)Frequency Response: 120Hz – 20kHzSpeaker Element: Low frequency; 8 × 5 cm cone woofer High frequency; Balanced dome-typeInput Terminal: Detachable screw terminal, (+)/(-) 2 each (for bridge connection)

H-1 2-Way Flush Mount Speaker System

Usable Cable: Solid cable, stranded cable: 0.2 - 2.5mm2 (AWG No. 24 - 14 equivalent)Finish: Cover; Fire-resistant ABS resin, white, paint/Punched net; Steel plate, white paint/Adapter frame; Stainless steelDimensions: 312 (W) × 126 (H) × 90 (D)mmWeight: 1.5kg (including Adapter Frame)Accessory: Adapter Frame (HY-H1) ×1, M4 mounting screw × 4, Hole pattern paper × 1.Other Feature: Enclosure mounting angle: Up to 90° adjustable

* When installing, mount the Adapter Frame as switch box cover. (The Adapter Frame HY-H1 is also available as an optional accessory.)* It is possible to mount the speaker directly to the switch box (without a cover.)

H-2/H-2WP 2-Way Surface Mount Speaker System

Enclosure: Sealed typePower Handling Capacity: 120W (continuous program/4Ω)/40W (continuous pink noise/4ΩRated Input: 12W (16Ω, high impedance)Rated Impedance: 4Ω or 16Ω/100V line; 830Ω (12W), 1.7kΩ (6W), 3.3kΩ (3W)/70V line; 420Ω (12W), 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 88dB at installation 1/2 free sound field (Measured by installing the unit in the center of a wall.)Frequency Response: 100Hz – 20kHzSpeaker Element: Low frequency; 10cm cone-type/High frequency; Balanced dome-typeDust/Water Protection: IP64 (H-2WP only)Input Terminal: Detachable screw terminal, (+)/(-) 2 each (for bridge connection) Usable Cable: Solid cable, stranded cable: 0.2 - 2.5mm2 (AWG No. 24 - 14 equivalent)

Finish: H-2: Punched net: Steel plate, white paint/Frame: Fire-resistant ABS resin, white, paint/Base frame; steel plateH-2WP: Punched ne: Steel plate (zinc plating), white, poweder coating/Frame: ABS resin, white/Base frame; Stainless plate Dimensions: ø268 × 111 (H)mm Weight: 2.1kg (including Base Frame) Accessory: Base Frame ×1Usable Electrical Box: 1-gang size switch box (with cover)Other Feature: H-2: Angle of speaker: 360° adjustable in parallel to the mounting surface.H-2WP: Angle of speaker: 360° adjustable in pararel to the mounting surface. (The angle should be kept 45° left and right each in a downward direction for the wall installation,)

* Without using an electrical box, mounting the supplied base frame directly to a wall or ceiling allows the speaker installation.Note: Do not install the unit where it is likely to be corroded in such places as indoor pools, bathrooms, or seaside (H-2WP).

H-3/H-3WP2-Way Wall Mount Speaker System

Enclosure: Sealed typePower Handling Capacity: 150W (continuous program/8Ω)/50W (continuous pink noise/8Ω)Rated Input: 30W (16Ω, high impedance)Rated Impedance: 8Ω or 16Ω/100V line; 330Ω (30W), 670Ω (15W), 1.3kΩ (7.5W)/70V line; 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 1.3kΩ (3.75W)Sensitivity (1W, 1m): 89dB at installation in 1/2 free sound field (Measured by installing the unit in the center of a wall.)Frequency Response: 100Hz – 20kHz (-10dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a wall.)Crossover Frequency: 4kHzDust/Water Protection: IPX4 (H-3WP only)Speaker Component: Low frequency; 10cm cone-type × 2High frequency; 2.5cm dome-type (neodymium magnet)Input Terminal: Detachable screw terminal, (+)/(-) 2 each (for bridge connection)

Usable Cable: Solid cable, stranded cable: 0.2 – 2.5mm2 (AWG No. 24 – 14 equivalent)Finish: H-3: Enclosure: Fire-resistant ABS resin, black/Front Frame: Fire-resistant ABS resin, off-white, paint/Punched Net: Stainless plate, off-white, paint/Base Frame; Steel plate, platingH-3WP: Enclosure: Fire-resistant ABS resin, black/Front Frame: Fire-resistant ABS resin, off-white, paint/Punched Net: Steel plate (zinc plating), off-white, powder coating/Base Frame; Stainless steelDimensions: 295 (W) × 318 (H) ×129 (D)mmWeight: 3.3kgAccessory: Front grille ×1/Base frame ×1/Electrical box mounting screw ×1 setUsable Electrical Box: 2-gang electrical box

Note: Avoid using the unit near the shore or at an indoor swimming pool, as doing so may significantly reduce the product life (H-3WP).

HB-1Wall/Ceiling Mount Subwoofer

Enclosure: Acoustic Super WooferPower Handling Capacity: 240W (continuous program, 40 – 200Hz)/80W (continuous pink noise, 40 – 200Hz)Rated Impedance: 8ΩSensitivity (1W, 1m):91dB installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling or wall.)/85dB installation in 1/2 free sound field (Measured in anechoic chamber.)Frequency Response: 45 – 200Hz (-10dB) installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling or wall.)Speaker Component: 20cm cone speakerInput Terminal: Detachable screw terminal, (+)/(-) 2 each (for bridge connection) Usable Cable: Solid cable, stranded cable: 0.2 – 2.5mm2 (AWG No. 24 – 14)

Finish: Enclosure; Steel plat, black paint/Front Frame; Fire-resistant ABS resin, off-white, paint/Punched net; Steel plate, off-white, paint/Mounting bracket; Steel plate, black paintDimensions: 430 (W) × 544 (H) ×135 (D)mmWeight: 11kg (including front grille and mounting bracket)Accessory: Front frame ×1, Mounting bracket ×1 set, Anchor piece × 2, Stud holder × 4, Screw ×1 setOption: Matching transformer: MT-S0601 (rated 60W)

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t


F Series Speakers

6362

F-1000BTWP*/F-1000WTWP*Enclosure Type: Bass-reflex typeRated Input: 15WRated Impedance: 8Ω/100V line: 670Ω (15W), 2kΩ (5W), 3.3kΩ (3W), 10kΩ (1W)/70V line: 330Ω (15W), 670Ω (7.5W), 2kΩ (2.5W), 3. kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 87dB at installation in 1/2 free sound fieldFrequency Response: 85Hz – 20kHz, -10dB at installation in 1/2 free sound fieldCrossover Frequency: 5kHzDirectivity Angle: Horizontal: 90°, Vertical: 90°Speaker Component: Low frequency: 10 cm (4") cone-type/High frequency: Balanced dome tweeterInput Terminal: Push-in terminalWater Protection: IPX4Operating Temperature: -10°C to +50°C Finish: F-1000BTWP: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/

F-1000B/F-1000WEnclosure Type: Bass-reflex typePower Handling Capacity: 30W (continuous pink noise)/90W (continuous program)Rated Impedance: 8ΩSensitivity (1W, 1m): 87dB at installation in 1/2 free sound fieldFrequency Response: 85Hz – 20kHz, -10dB at installation in 1/2 free sound fieldCrossover Frequency: 5kHzDirectivity Angle: Horizontal: 90°, Vertical: 90°Speaker Component: Low frequency: 10 cm (4") cone-type/High frequency: Balanced dome tweeterInput Terminal: Push-in terminalFinish: F-1000B: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint

F-1000BT/F-1000WTEnclosure Type: Bass-reflex typeRated Input: 15W (high impedance)Power Handling Capacity: Continuous pink noise 30W (low impedance)/Continuous program 90W (low impedance)Rated Impedance: 8Ω/100V line: 670Ω (15W), 2kΩ (5W), 3.3kΩ (3W), 10kΩ (1W)/70V line: 330Ω (15W), 670Ω (7.5W), 2kΩ (2.5W), 3. kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 87dB at installation in 1/2 free sound fieldFrequency Response: 85Hz – 20kHz, -10dB at installation in 1/2 free sound fieldCrossover Frequency: 5kHzDirectivity Angle: Horizontal: 90°, Vertical: 90°Speaker Component: Low frequency: 10 cm (4") cone-type/High frequency: Balanced dome tweeterInput Terminal: Push-in terminal

F-1000B/1000WF-1000BT/1000WTF-1000BTWP/1000WTWP2-Way Wide-Dispersion Speaker System

F-1300B/F-1300WEnclosure Type: Bass-reflex typePower Handling Capacity: 50W (continuous pink noise)/150W (continuous program)Rated Impedance: 8ΩSensitivity (1W, 1m): 90dB at installation in 1/2 free sound fieldFrequency Response: 80Hz – 20kHz, -10dB at installation in 1/2 free sound fieldCrossover Frequency: 2kHzDirectivity Angle: Horizontal: 110°, Vertical: 100°Speaker Component: Low frequency: 13 cm (5") cone-type/High frequency: 25mm (1") dome tweeterInput Terminal: Push-in terminalFinish: F-1300B: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint

F-1300BT/F-1300WTEnclosure Type: Bass-reflex typeRated Input: 30W (high impedance)Power Handling Capacity: Continuous pink noise 50W (low impedance)/Continuous program 150W (low impedance)Rated Impedance: 8Ω/100V line: 330Ω (30W), 1kΩ (10W), 3.3kΩ (3W), 10kΩ (1W)/70V line: 170Ω (30W), 330Ω (15W), 1kΩ (5W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 90dB at installation in 1/2 free sound fieldFrequency Response: 80Hz – 20kHz, -10dB at installation in 1/2 free sound fieldCrossover Frequency: 2kHzDirectivity Angle: Horizontal: 110°, Vertical: 100°Speaker Component: Low frequency: 13 cm (5") cone-type/High frequency: 25mm (1") dome tweeterInput Terminal: Push-in terminal


F-1000W: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 130 (W) × 202 (H) × 131 (D) mmWeight: 1.8kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set Option: F-1000B: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10B, Cluster bracket: HY-CL10B, Speaker stand: ST-16A/F-1000W: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10W, Cluster bracket: HY-CL10B, Speaker stand: ST-16ARecommended Subwoofer: HB-1, FB-10, FB-100

Finish: F-1000BT: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint F-1000WT: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 130 (W) × 202 (H) × 131 (D) mmWeight: 1.8kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set Option: F-1000BT: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10B, Cluster bracket: HY-CL10B, Speaker stand: ST-16A/F-1000WT: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10W, Cluster bracket: HY-CL10B, Speaker stand: ST-16ARecommended Subwoofer: HB-1, FB-10, FB-100

Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint F-1000WTWP: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 130 (W) × 202 (H) × 131 (D) mmWeight: 2kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal cover × 1, Terminal cover mounting screw × 4Option: Speaker mount bracket: YS-60B Note: Bolts and nuts for mounting the bracket to the wall or ceiling are not included. Prepare them separately.Avoid installing the speaker in locations close to the seashore or in indoor swimming facilities that are not to fall resulting in personal injury.*Caution on installationDo not install the F-1000BTWP/WTWP at places where it is likely to be corroded such as bath room, indoor pools, or seaside.

F-1300W: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 162 (W) × 250 (H) 161 (D) mmWeight: 3.1kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 setOption: F-1300B: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10B, Cluster bracket: HY-CL10B, Speaker stand: ST-16A/F-1300W: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10W, Cluster bracket: HY-CL10B, Speaker stand: ST-16ARecommended Subwoofer: HB-1, FB-100

Finish: F-1300BT: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint F-1300WT: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 162 (W) × 250 (H) 161 (D) mmWeight: 3.6kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 setOption: F-1300BT: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10B, Cluster bracket: HY-CL10B, Speaker stand: ST-16A/F-1300WT: Board hanger bracket: HY-BH10B, Ceiling mount bracket: HY-CM10W, Cluster bracket: HY-CL10B, Speaker stand: ST-16ARecommended Subwoofer: HB-1, FB-100

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

63

F-1300BTWP*/F-1300WTWP*Enclosure Type: Bass-reflex typeRated Input: 30WRated Impedance: 100V line: 330Ω (30W), 1kΩ (10W), 3.3kΩ (3W), 10kΩ (1W)/70V line: 170Ω (30W), 330Ω (15W), 1kΩ (5W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 90dB at installation in 1/2 free sound fieldFrequency Response: 80Hz – 20kHz, -10dB at installation in 1/2 free sound fieldCrossover Frequency: 2kHzDirectivity Angle: Horizontal: 110°, Vertical: 100°Speaker Component: Low frequency: 13 cm (5") cone-type/High frequency: 25mm (1") dome tweeterInput Terminal: Push-in terminalWater Protection: IPX4Operating Temperature: -10°C to +50°C Finish: F-1300BTWP: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint

F-1300WTWP: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 162 (W) × 250 (H) 161 (D) mmWeight: 3.6kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal cover × 1, terminal cover mounting screw × 4Option: Speaker mount bracket: YS-60B

Note: Bolts and nuts for mounting the bracket to the wall or ceiling are not included. Prepare them separately.Avoid installing the speaker in locations close to the seashore or in indoor swimming facilities that are not to fall resulting in personal injury.*Caution on installationDo not install the F-1300BTWP/WTWP at places where it is likely to be corroded such as bath room, indoor pools, or seaside.


F-2000B/F-2000WEnclosure Type: Bass-reflex typePower Handling Capacity: Continuous pink noise: 60W/Continuous program: 180WRated Impedance: 8ΩSensitivity (1W, 1åm): 92 dB at installation in 1/2 free sound field/93 dB at installation in 1/2 free sound field (with horn adapter)Frequency Response: 65 – 20,000 Hz, -10 dB at installation in 1/2 free sound fieldCrossover Frequency: 2.5kHzDirectivity Angle: Horizontal: 110°, Vertical: 100°/Horizontal: 80°, Vertical: 80° (with horn adapter)Speaker Component: Low frequency: 20 cm (8") cone-type/High frequency: 25 mm (1") dome tweeterInput Terminal: Push-in terminal

Finish: F-2000B: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint F-2000W: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 244 (W) × 373 (H) × 235 (D) mmWeight: 6.5kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Horn adapter × 1, Horn adapter mounting screw × 4Option: F-2000B: Ceiling mount bracket: HY-CM20B, Cluster bracket: HY-CL20B, Speaker stand: ST-16A/F-2000W: Ceiling mount bracket: HY-CM20W, Cluster bracket: HY-CL20B, Speaker stand: ST-16ARecommended Subwoofer: FB-100, FB-120B/W

F-2000BT/F-2000WTEnclosure Type: Bass-reflex typeRated Input: 60W (high impedance)Power Handling Capacity: Continuous pink noise: 60W (low impedance)/Continuous program: 180W (low impedance)Rated Impedance: 8Ω/100V line: 170Ω (60W), 330Ω (30W), 670Ω (15W), 3.3kΩ (3W)/70V line: 83Ω (60W), 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 92dB at installation in 1/2 free sound field/93dB at installation in 1/2 free sound field (with horn adapter)Frequency Response: 65 – 20,000 Hz, -10 dB at installation in 1/2 free sound fieldCrossover Frequency: 2.5kHzDirectivity Angle: Horizontal: 110°, Vertical: 100°/Horizontal: 80°, Vertical: 80° (with horn adapter)Speaker Component: Low frequency: 20 cm (8") cone-type/High frequency: 25 mm (1") dome tweeterInput Terminal: Push-in terminal

Finish: F-2000BT: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint F-2000WT: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 244 (W) × 373 (H) × 235 (D) mmWeight: 7.4kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Horn adapter × 1, Horn adapter mounting screw × 4Option: F-2000BT: Ceiling mount bracket: HY-CM20B, Cluster bracket: HY-CL20B, Speaker stand: ST-16A/F-2000WT: Ceiling mount bracket: HY-CM20W, Cluster bracket: HY-CL20B, Speaker stand: ST-16ARecommended Subwoofer: FB-100, FB-120B/W

F-2000BTWP*/F-2000WTWP*Enclosure Type: Bass-reflex typeRated Input: 60WRated Impedance: 100V line: 170Ω (60W), 330Ω (30W), 670Ω (15W), 3.3kΩ (3W)/70V line: 83Ω (60W), 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 92 dB at installation in 1/2 free sound field/93 dB at installation in 1/2 free sound field (with horn adapter)Frequency Response: 65 – 20,000 Hz, -10 dB at installation in 1/2 free sound fieldCrossover Frequency: 2.5 kHzDirectivity Angle: Horizontal: 110°, Vertical: 100°/Horizontal: 80°, Vertical: 80° (with horn adapter)Speaker Component: Low frequency: 20 cm (8") cone-type/High frequency: 25 mm (1") dome tweeterInput Terminal: Push-in terminalWater Protection: IPX4Operating Temperature: -10°C to +50°C Finish: F-2000BTWP: Enclosure: HIPS resin, black/Punched net: Surface-treated steel plate, black, paint/Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint F-2000WTWP: Enclosure: HIPS resin, white/Punched net: Surface-treated steel plate, white, paint/Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint

Dimensions: 244 (W) × 373 (H) × 235 (D) mmWeight: 7.4kg (including the supplied brackets)Accessory: Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Horn adapter × 1, Horn adapter mounting screw × 4, Terminal cover × 1, Terminal cover mounting screw × 4Option: Speaker mount bracket: SP-131, YS-60B

Note: Bolts and nuts for mounting the bracket to the wall or ceiling are not included. Prepare them separately.Avoid installing the speaker in locations close to the seashore or in indoor swimming facilities that are not well ventilated. In such locations the bracket may be vulnerable to corrosion, eventually allowing the speaker to fall resulting in personal injury.*Caution on installationDo not install the F-2000BTWP/WTWP at places where it is likely to be corroded such as bath room, indoor pools, or seaside.

With Horn Adapter

Without Horn Adapter

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

64

Wide-Dispersion Ceiling SpeakersEnclosure: Bass reflex typeRated Input: 60W (high impedance)Power Handling Capacity: Continuous pink noise; 90W (8Ω), 60W (16Ω)/Continuous program; 180W (8Ω), 120W (16Ω)Impedance: 100V line; 170Ω (60W), 330Ω (30W), 670Ω (15W), 3.3kΩ (3W)/70V line; 83Ω (60W), 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 3.3kΩ (1.5W)/25V line; 83Ω (7.5W), 170Ω (3.7W), 330Ω (1.9W), 670Ω (0.9W), 3.3kΩ (0.2W)/Low (adjustable); 16Ω, 8ΩSensitivity (1W, 1m): 91dBFrequency Response: 60Hz – 20kHz (-10dB), 45Hz – 20kHz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)Speaker Component: High frequency; Dome-type/Low frequency; 16cm cone-typeMounting Hole: ø250mm (maximum ceiling thickness; 37mm)

F-2322C (12cm cone)30W Series Full Range

Enclosure: Bass reflex typeRated Input: 30W (high impedance)Power Handling Capacity: Continuous pink noise; 60W (8Ω), 30W (16Ω)/Continuous program;120W (8Ω), 60W (16Ω)Impedance: 100V line; 330Ω (30W), 1kΩ (10W), 3.3kΩ (3W), 10kΩ (1W)/70V line; 170Ω (30W), 330Ωs (15W), 1kΩ (5W), 3.3kΩ (1.5W), 10kΩ (0.5W)/25V line; 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩs (0.2W), 10kΩ (0.06W)/Low (adjustable); 16Ω, 8ΩSensitivity (1W, 1m): 90dBFrequency Response: 70Hz – 20kHz (-10dB), 50Hz – 20kHz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)Speaker Component: 12cm cone-typeMounting Hole: ø200 (maximum ceiling thickness; 37mm)

F-2352C (12cm cone)30W Series 2-Way Wide Range

Enclosure: Bass reflex typeRated Input: 30W (high impedance)Power Handling Capacity: Continuous pink noise; 60W (8Ω), 30W (16Ω)/Continuous program; 120W (8Ω), 60W (16Ω)Impedance: 100V line; 330Ω (30W), 1kΩ (10W), 3.3kΩ (3W), 10kΩ (1W)/70V line; 170Ω (30W), 330Ω (15W), 1kΩ (5W), 3.3kΩ (1.5W), 10kΩ (0.5W)/25V line; 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W), 10kΩ (0.06W)/Low (adjustable); 16Ω, 8Ω Sensitivity (1W, 1m): 90dBFrequency Response: 70Hz – 20kHz (-10dB), 50Hz – 20kHz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)Speaker Component: High frequency; Balanced dome-type/Low frequency; 12cm cone-type

F-2852C (16cm cone)High Power (60W) 2-Way Wide Range

Input Terminal: Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)Usable Cable: Solid copper wire; ø0.5 – ø1.6mm (equivalent to AWG No. 24 – 14)/Stranded copper wire; 0.2 – 2.5mm2 (equivalent to AWG No. 24 – 14)Finish: Enclosure; Steel plate, plating/Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paintDimensions: ø280 × 227 (D)mmWeight: 5.1kg (including mounting accessories)Accessory: Panel × 1, Ceiling reinforcement ring × 1, Safety wire × 1, Paper pattern × 1Option: Anchor hanging bracket: HY-AH1, Tile bar bridge: HY-TB1

Input Terminal: Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)Usable Cable: Solid copper wire; ø0.5 – ø1.6mm (equivalent to AWG No. 24 – 14)/Stranded copper wire; 0.2 – 2.5mm2 (equivalent to AWG No. 24 – 14)Finish: Enclosure; Steel plate, plating/Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paintDimensions: ø230 × 200 (D)mmWeight: 3.7kg (including mounting accessories)Accessory: Panel × 1, Ceiling reinforcement ring × 1, Safety wire × 1, Paper pattern × 1Option: Anchor hanging bracket: HY-AH1, Back can: HY-BC1, Tile bar bridge: HY-TB1, Trim ring: HY-TR1

Mounting Hole: ø200 (maximum ceiling thickness; 37mm)Input Terminal: Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)Usable Cable: Solid copper wire; ø0.5 – ø1.6mm (equivalent to AWG No. 24 – 14)/Stranded copper wire; 0.2 – 2.5mm2 (equivalent to AWG No. 24 – 14)Finish: Enclosure; Steel plate, plating/Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paintDimensions: ø230 × 229 (D)mmWeight: 3.7kg (including mounting accessories)Accessory: Panel × 1, Ceiling reinforcement ring × 1, Safety wire × 1, Paper pattern × 1Option: Anchor hanging bracket: HY-AH1, Back can: HY-BC1, Tile bar bridge: HY-TB1, Trim ring: HY-TR1

F-122C (12cm cone)30W Series Full Range(Equalizing Controlled Type)

Enclosure: Bass reflex typeRated Input: 30W (high impedance)Power Handling Capacity: Continuous pink noise; 60W (8Ω), 30W (16Ω)/Continuous program; 120W (8Ω), 60W (16Ω)Impedance: 100V line; 330Ω (30W), 1kΩ (10W), 3.3kΩ (3W), 10kΩ (1W)/70V line; 170Ω (30W), 330Ω (15W), 1kΩ (5W), 3.3kΩ (1.5W), 10kΩ (0.5W)/25V line; 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W), 10kΩ (0.06W)/Low (adjustable); 16Ω, 8ΩSensitivity (1W, 1m): 90dBFrequency Response: 70Hz – 2kHz (-10dB), 50Hz – 20kHz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)Speaker Component: 12cm cone-typeMounting Hole: ø200 (maximum ceiling thickness; 37mm)Input Terminal: Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)

Usable Cable: Solid copper wire; ø0.5 – ø1.6mm (equivalent to AWG No. 24 – 14)/Stranded copper wire; 0.2 – 2.5mm2 (equivalent to AWG No. 24 – 14)Finish: Enclosure; Steel plate, plating/Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paintDimensions: ø230 × 229 (D)mmWeight: 3.7kg (including mounting accessories)Accessory: Panel × 1, Ceiling reinforcement ring × 1, Safety wire × 1, Paper pattern × 1Option: Anchor hanging bracket: HY-AH1, Back can: HY-BC1, Tile bar bridge: HY-TB1/Trim ring; HY-TR1

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

65

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Optional Accessories

F-2352SC (12cm cone)6W Series 2-Way Wide Range

Rated Input: 6W (high impedance)Power Handling Capacity: Continuous pink noise; 9W (8Ω), 6W (16Ω)/Continuous program; 18W (8Ω), 12W (16Ω)Impedance:100V line; 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W), 20kΩ (0.5W)/70V line; 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W), 10kΩ (0.5W), 20kΩ (0.25W)/25V line; 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W), 10kΩ (0.06W), 20kΩs (0.03W)/Low (adjustable); 16Ω, 8ΩSensitivity (1W, 1m): 89dBFrequency Response: 80Hz – 20kHz (-10dB), 50Hz – 20kHz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)Speaker Component: High frequency; Balanced dome-type/Low frequency; 12cm cone-typeMounting Hole: ø200 (maximum ceiling thickness; 37mm)Input Terminal: Push-in connector (Bridging terminal-2 branch type)

F-1522SC (10cm cone)6W Series Full Range

Rated Input: 6W (high impedance)Power Handling Capacity: Continuous pink noise; 9W (8Ω), 6W (16Ω)/Continuous program; 18W (8Ω), 12W (16Ω)Impedance: 100V line; 1.7kΩ (6W), 3.3kΩ (3W)/70V line; 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W)/25V line; 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W)/Low (adjustable); 16Ω, 8ΩSensitivity (1W, 1m): 88dBFrequency Response: 65Hz – 18kHz (-10dB), 45Hz – 20kHz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)Speaker Component: 10cm cone-typeMounting Hole: ø135mm (maximum ceiling thickness; 37mm)Input Terminal: Push-in connector (Bridging terminal-2 branch type)

Usable Cable: 600V Vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire; ø0.8 – ø1.6mm (equivalent to AWG No.20 – 15)/7-core twisted copper wire; 0.75 – 1.25mm2 (equivalent to AWG No.18 – 17)Finish: Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paint/Dust-proof bag; Artificial fiber, blackDimensions: ø230 × 154 (D)mmWeight: 1.5kg (including panel)Accessory: Panel × 1, Paper pattern × 1Option: Back can; HY-BC1, Reinforcement ring; HY-RR2, Anchor hanging bracket; HY-AH1 (HY-RR2 required), Tile bar bridge; HY-TB1 (HY-RR2 required), Trim ring; HY-TR1 (HY-RR2 required)

Usable Cable: 600V Vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire; ø0.8 – ø1.6mm (equivalent to AWG No.20 – 15)/7-core twisted copper wire; 0.75 – 1.25mm2 (equivalent to AWG No.18 – 17)Finish: Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paint/Dust-proof bag; Artificial fiber, blackDimensions: ø155 × 117 (D)mmWeight: 1kg (including panel)Accessory: Panel × 1, Paper pattern × 1Option: Reinforcement ring; HY-RR1

HY-RR2Reinforcement Ring

HY-BC1Back Can

Finish: Surface-treated steel plate, t0.8, black, paintWeight: 1,5kgAccessory: Rubber grommet × 2

HY-TR1Trim Ring

Ceiling Hole Diameter: ø200 – ø300mm Finish: Surface-treated steel plate, white, paint Weight: 500g

HY-TB1Tile Bar Bridge

Finish: Steel plate, plating Weight: 500g (for set of 2 bars) Accessory: Mounting screw × 4

HY-AH1Anchor Hanging Bracket

Finish: Steel plate, platingWeight: 700gAccessory: Paper pattern × 1

HY-RR1Reinforcement Ring

Ceiling Hole Diameter: ø135mmFinish: Surface-treated steel plateWeight: 80g

Ceiling Hole Diameter: ø200mmFinish: Surface-treated steel plateWeight: 280g

HS Series Speakers

Optional Accessory

6766

HS-120B/HS-120WEnclosure: Sealed type Power Handling Capacity: Continuous pink noise: 100W, Continuous program: 300WRated Impedance: 8ΩSensitivity (1W, 1m): 97dBFrequency Response: 80Hz – 20kHzCrossover Frequency: 3kHzDirectivity Angle: Horizontal: 90°/Vertical: 40°Speaker Component: Low frequency: 30cm cone-type, High frequency: Balanced dome tweeter × 6Input Terminal: Neutrik NL4MP Speakon and M4 screw terminal, distance between barriers: 9mm Operating Temperature: -10°C to +50°CFinish: HS-120B: Enclosure: Polypropylene, black/Punched net: Surface-treated steel plate, black/HS-120W: Enclosure: Polypropylene, white/Punched net: Surface-treated steel plate, whiteDimensions: 361 (W) × 448 (H) × 320 (D)mmWeight: 8.5kgAccessory: Handle × 1, Handle fitting bracket × 2, Handle mounting screw × 2, Rubber foot × 2, Rubber foot mounting screw × 2Option: HS-120B: Mounting bracket: HY-1200VB (for vertical speaker mounting)/HY-1200HB (for horizontal speaker mount-ing), Ceiling mount bracket: HY-C0801, Wall mount bracket: HY-W0801, Speaker stand: ST-34B/HS-120W: Mounting bracket: HY-1200VW (for vertical speaker mounting)/HY-1200HW (for horizontal speaker mounting), Ceiling mount bracket: HY-C0801W, Wall mount bracket: HY-W0801W, Speaker stand: ST-34B

HS-120B/HS-120WHS-1200BT/HS-1200WTCoaxial Array Speaker System

HS-1200BT/HS-1200WTEnclosure: Sealed type Rated Input: 60W (High impedance)Power Handling Capacity: Continuous pink noise: 100W (Low impedance), Continuous program: 300W (Low impedance)Rated Impedance: 8Ω/100V line: 170Ω (60W), 330Ω (30W), 670Ω (15W)/70V line: 83Ω (60W), 170Ω (30W) 330Ω (15W), 670Ω (7.5W)Sensitivity (1W, 1m): 97dBFrequency Response: 70Hz – 20kHzCrossover Frequency: 3kHzDirectivity Angle: Horizontal: 90°/Vertical: 40°Speaker Component: Low frequency: 30cm cone-type, High frequency: Balanced dome tweeter × 6Input Terminal: Neutrik NL4MP Speakon and M4 screw terminal, distance between barriers: 9mm Operating Temperature: -10°C to +50°CFinish: HS-1200BT: Enclosure: Polypropylene, black/Punched net: Surface-treated steel plate, black/HS-1200WT: Enclosure: Polypropylene, white/Punched net: Surface-treated steel plate, whiteDimensions: 361 (W) × 448 (H) × 320 (D)mmWeight: 10kgAccessory: Handle × 1, Handle fitting bracket × 2, Handle mounting screw × 2, Rubber foot × 2, Rubber foot mounting screw × 2Option: HS-1200BT: Mounting bracket: HY-1200VB (for vertical speaker mounting)/HY-1200HB (for horizontal speaker mounting), Ceiling mount bracket: HY-C0801, Wall mount bracket: HY-W0801, Speaker stand: ST-34B/HS-1200WT: Mounting bracket: HY-1200VW (for vertical speaker mounting)/HY-1200HW (for horizontal speaker mount-ing), Ceiling mount bracket: HY-C0801W, Wall mount bracket: HY-W0801W, Speaker stand: ST-34B

HS-150B/HS-150WEnclosure: Sealed type Power Handling Capacity: Continuous pink noise: 100W, Continuous program: 300WRated Impedance: 8ΩSensitivity (1W, 1m): 98dBFrequency Response: 70Hz – 20kHzCrossover Frequency: 3kHzDirectivity Angle: Horizontal: 90°/Vertical: 40°Speaker Component: Low frequency: 38cm cone-type, High frequency: Balanced dome tweeter × 6Input Terminal: Neutrik NL4MP Speakon and M4 screw terminal, distance between barriers: 9mm Operating Temperature: -10°C to +50°CFinish: HS-150B: Enclosure: Polypropylene, black/Punched net: Surface-treated steel plate, black/HS-150W: Enclosure: Polypropylene, white/Punched net: Surface-treated steel plate, whiteDimensions: 451 (W) × 560 (H) × 400 (D)mmWeight: 12kgAccessory: Handle × 1, Handle fitting bracket × 2, Handle mounting screw × 2, Rubber foot × 2, Rubber foot mounting screw × 2Option: HS-150B: Mounting bracket: HY-1500VB (for vertical speaker mounting)/HY-1500HB (for horizontal speaker mount-ing), Ceiling mount bracket: HY-C0801, Wall mount bracket: HY-W0801, Speaker stand: ST-33B/HS-150W: Mounting bracket: HY-1500VW (for vertical speaker mounting)/HY-1500HW (for horizontal speaker mounting), Ceiling mount bracket: HY-C0801W,Wall mount bracket: HY-W0801W, Speaker stand: ST-34B

HS-1500BT/HS-1500WTEnclosure: Sealed type Rated Input: 60W (High impedance)Power Handling Capacity: Continuous pink noise: 100W (Low impedance), Continuous program: 300W (Low impedance)Rated Impedance: 8Ω/100V line: 170Ω (60W), 330Ω (30W), 670Ω (15W)/70V line: 83Ω (60W), 170Ω (30W) 330Ω (15W), 670Ω (7.5W)Sensitivity (1W, 1m): 98dBFrequency Response: 6Hz – 20kHzCrossover Frequency: 3kHzDirectivity Angle: Horizontal: 90°/Vertical: 40°Speaker Component: Low frequency: 38cm cone-type, High frequency: Balanced dome tweeter × 6Input Terminal: Neutrik NL4MP Speakon and M4 screw termi-nal, distance between barriers: 9mm Operating Temperature: -10°C to +50°CFinish: HS-1500BT: Enclosure: Polypropylene, black/Punched net: Surface-treated steel plate, black/HS-1500WT: Enclosure: Polypropylene, white/Punched net: Surface-treated steel plate, whiteDimensions: 451 (W) × 560 (H) × 400 (D)mmWeight: 14kgAccessory: Handle × 1, Handle fitting bracket × 2, Handle mounting screw × 2, Rubber foot × 2, Rubber foot mounting screw × 2Option: HS-1500BT: Mounting bracket: HY-1500VB (for vertical speaker mounting)/HY-1500HB (for horizontal speaker mounting), Ceiling mount bracket: HY-C0801, Wall mount bracket: HY-W0801, Speaker stand: ST-33B/HS-1500WT: Mounting bracket: HY-1500VW (for vertical speaker mounting)/HY-1500HW (for horizontal speaker mount-ing), Ceiling mount bracket: HY-C0801W,Wall mount bracket: HY-W0801W, Speaker stand: ST-34B

HS-150B/HS-150WHS-1500BT/HS-1500WTCoaxial Array Speaker System

ST-34BSpeaker Stand

Enlarged Extensible Length: 1373 –1965mmLoad Capacity: Less than 35kg Speaker Mounting Pitch: 101 –153mmFinish: Inner pipe, legs: Aluminum, black, mat finish, paint Bracket: Steel plate, black, mat finish, paint Dimensions: ø1290 (open legs) × 1373 – 1968 (height with bracket mounted)mm Weight: 4.2kgAccessory: Bracket × 1, Speaker mounting screw × 2, Speaker mounting washer × 2

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

67

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Compact Plane Wave SpeakersPlane Wave Speakers

Commercial Sound Speakers

PW-1230DB/1230DWType of Radiation: Double-sided radiationFront (The side with TOA logo affixed: Positive pressure wave,Rear: Negative pressure wave)Rated Input: 30WRated Impedance: High impedance 100V line: 330Ω (30W),670Ω (15W), 1kΩ (10W), 2kΩ (5 W)/High impedance 70V line: 170Ω (30W), 330Ω (15W),670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)Sensitivity: 86dB (1W, 1m equivalent measured at 4m, 1 – 10kHz)86dB (1W, 1m measured at 1m, 1 – 10kHz)(Beam tilting : FLAT, High pass filter: OFF)Frequency Response: 300Hz – 17.5kHz (Beam tilting : FLAT,High pass filter: OFF)Directivity Angle: Horizontal: 38° (2kHz, 1/3 octave band),Vertical: 75° (2kHz, 1/3 octave band)Speaker Unit: Plane wave unit (152 × 214mm) × 2Setting Switch: Beam tilting (radiation direction)FLAT: 0° downward/DOWNWARD: 5° downwardHigh pass filter (450Hz, -12dB/oct) : OFF/ONSpeaker Cord: ø9mm, 6-core cabtyre cable, 2mWater Protection: IPX4Operating Temperature: -10°C to +50°CFinish: Enclosure, Punched net and Mounting bracket:Stainless, black or light ivory, semi-gloss, paintDimensions: 524 (W) × 355 (H) × 60 (D)mm(including mounting bracket)Weight: 7.3kg (including mounting bracket)

PW-1230DB/DW (30W)Compact Double-Sided Radiation TypePW-1230SB/SW (30W)Compact Single-Sided Radiation Type

PW-1230SB/1230DWType of Radiation: Single-side radiationRated Input: 30WRated Impedance: High impedance 100V line: 330Ω (30W),670Ω (15W), 1kΩ (10W), 2kΩ (5 W)/High impedance 70V line: 170Ω (30W), 330Ω (15W),670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)Sensitivity: 87dB (1W, 1m equivalent measured at 4m, 1 – 10kHz)87dB (1W, 1m measured at 1m, 1 – 10kHz)(Beam tilting : FLAT, High pass filter: OFF)Frequency Response: 450Hz – 17.5kHz (Beam tilting : FLAT, High pass filter: OFF)Directivity Angle: Horizontal: 38° (2kHz, 1/3 octave band),Vertical: 75° (2kHz, 1/3 octave band)Speaker Unit: Plane wave unit (152 × 214mm) × 2Setting Switch: Beam tilting (radiation direction)FLAT: 0° downward/DOWNWARD: 5° downwardHigh pass filter (450Hz, -12dB/oct) : OFF/ONSpeaker Cord: ø9mm, 6-core cabtyre cable, 2mWater Protection: IPX4Operating Temperature: -10°C to +50°CFinish: Enclosure, Punched net and Mounting bracket:Stainless, black or light ivory, semi-gloss, paintDimensions: 524 (W) × 355 (H) × 60 (D)mm(including mounting bracket)Weight: 7.8kg (including mounting bracket)

Large Plane Wave Speakers

PW-1430DB/1430DWType of Radiation: Double-sided radiationFront (The side with TOA logo affixed: Positive pressure wave,Rear: Negative pressure wave)Rated Input: 30WRated Impedance: High impedance 100V line: 330Ω (30W),670Ω (15W), 1kΩ (10W), 2kΩ (5 W)/High impedance 70V line: 170Ω (30W), 330Ω (15W),670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)Sensitivity: 88dB (1W, 1m equivalent measured at 4m, 1 – 10kHz)85dB (1W, 1m measured at 1m, 1 – 10kHz)(Beam tilting : FLAT, High pass filter: OFF)Frequency Response: 250Hz – 17.5kHz (Beam tilting : FLAT,High pass filter: OFF)Directivity Angle: Horizontal: 19° (2kHz, 1/3 octave band),Vertical: 78° (2kHz, 1/3 octave band)Speaker Unit: Plane wave unit (152 × 214mm) × 4Setting Switch: Beam tilting (radiation direction)FLAT: 0° downward/DOWNWARD: 5° downwardHigh pass filter (450Hz, -12dB/oct) : OFF/ONSpeaker Cord: ø9mm, 6-core cabtyre cable, 2mWater Protection: IPX4Operating Temperature: -10°C to +50°CFinish: Enclosure, Punched net and Mounting bracket:Stainless, black or light ivory, semi-gloss, paintDimensions: 831 (W) × 355 (H) × 60 (D)mm(including mounting bracket)Weight: 11.4kg (including mounting bracket)

PW-1430DB/DW (30W)Large Double-Sided Radiation TypePW-1430SB/SW (30W)Large Single-Sided Radiation Type

PW-1430SB/1430SWType of Radiation: Single-side radiationRated Input: 30WRated Impedance: High impedance 100V line: 330Ω (30W),670Ω (15W), 1kΩ (10W), 2kΩ (5 W)/High impedance 70V line: 170Ω (30W), 330Ω (15W),670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)Sensitivity: 90dB (1W, 1m equivalent measured at 4m, 1 – 10kHz)87dB (1W, 1m measured at 1m, 1 – 10kHz)Frequency Response: 400Hz – 17.5kHz (Beam tilting : FLAT, High pass filter: OFF)Directivity Angle: Horizontal: 38° (2kHz, 1/3 octave band),Vertical: 75° (2kHz, 1/3 octave band)Speaker Unit: Plane wave unit (152 × 214mm) × 4Setting Switch: Beam tilting (radiation direction)FLAT: 0° downward/DOWNWARD: 5° downwardHigh pass filter (450Hz, -12dB/oct) : OFF/ONSpeaker Cord: ø9mm, 6-core cabtyre cable, 2mWater Protection: IPX4Operating Temperature: -10°C to +50°CFinish: Enclosure, Punched net and Mounting bracket:Stainless, black or light ivory, semi-gloss, paintDimensions: 831 (W) × 355 (H) × 60 (D)mm(including mounting bracket)Weight: 11.9kg (including mounting bracket)

PW-1230DB/1230SB

PW-1230DW/1230SW

PW-1430DB/1430SB

PW-1430DW/1430SW

Flush Mount Type Ceiling SpeakersCeiling Speakers

68

PC-2869 (6W)PC-2852 (15W)

PC-2869Rated Input: 6W (100V line), 3W (70V line) Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/70V line: 1.7kΩs (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W)Sensitivity (1W, 1m): 94dB (500Hz – 5kHz, pink noise) Frequency Response: 40Hz – 20kHz (peak -20dB) Speaker Component: 20cm (8") double cone-typeDimensions for Fixing Hole: Mounting hole: ø250 ±3mm/Ceiling thickness: 5 – 25mmSpeaker Mounting Method: Spring clampApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.9 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.7 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal-2 branch type) Finish: Baffle: Steel plate, off-white (RAL 9010 or equivalent color), paint/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø280 × 92 (D)mmWeight: 1.4kgAccessory: Paper pattern × 1

PC-2369 (6W)

PC-1869 (6W)

PC-2852Rated Input: 15W (100V line, 70V line)Impedance: 100V line: 670Ω (15W), 1kΩ (10W), 2kΩ (5W), 3.3kΩ (3W)/70V line: 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 96dB (500 – 5,000Hz, pink noise) Frequency Response: 45Hz – 20kHz (peak -20dB) Speaker Component: 20cm (8") coaxial cone-typeDimensions for Fixing Hole: Mounting hole: ø250 ±3mm/Ceiling thickness: 5 – 25mmSpeaker Mounting Method: Spring clampApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.9 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.7 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal-2 branch type) Finish: Baffle: Steel plate, off-white (RAL 9010 or equivalent color), paint/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø280 × 92 (D)mmWeight: 1.6kgAccessory: Paper pattern × 1

Rated Input: 6W (100V line), 3W (70V line)Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ(1.5W), 13kΩ (0.8W)/70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W) Sensitivity (1W, 1m): 93dB (500Hz – 5kHz, pink noise) Frequency Response: 45Hz – 20kHz (peak -20dB) Speaker Component: 16cm (6") double cone-typeDimensions for Fixing Hole: Mounting hole: ø200 ±3mm/Ceiling thickness: 5 – 25mmSpeaker Mounting Method: Spring clampApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.9 – ø1.6mm (equivalent to AWG 20 – 14)/

Rated Input: 6W (100V line), 3W (70V line)Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W) Sensitivity (1W, 1m): 90dB (500Hz – 5kHz, pink noise) Frequency Response: 55Hz – 18kHz (peak -20dB) Speaker Component: 12cm (5") cone-typeDimensions for Fixing Hole: Mounting hole: ø150 ±3mm/Ceiling thickness: 5 – 25mmSpeaker Mounting Method: Spring clampApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.9 – ø1.6mm (equivalent to AWG 20 – 14)/

New SUS spring clamp installation method

Hook the speaker mounting spring(s) into the mounting hole.

Push up the panel.Hook the rest of spring(s).Make wiring.

7-core twisted copper wire: 0.7 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal-2 branch type) Finish: Baffle: Steel plate, off-white (RAL 9010 or equivalent color), paint/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø230 × 79 (D)mmWeight: 760gAccessory: Paper pattern × 1

7-core twisted copper wire: 0.7 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal-2 branch type) Finish: Baffle: Steel plate, off-white (RAL 9010 or equivalent color), paint/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø180 × 72 (D)mmWeight: 620gAccessory: Paper pattern × 1

PC-648R (6W)PC-658R (6W)

PC-648RRated Input: 6W (100V line), 3W (70V line) Rated impedance: 100V line; 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W)/70V line; 1.7kΩ (3W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 90dB (500Hz – 5kHz pink noise)Frequency Response: 100Hz – 18kHz (peak -20dB)Speaker Component: 12cm (5") cone-typeDimensions for Fixing Hole: Mounting hole: ø145 ±5mm/Ceiling thickness: 5 – 25mm Speaker Mounting Method: Spring clampFinish: Baffle; Polypropylene resin, off-white (RAL 9010 or equivalent color)/Grille; Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø168 × 77(D)mmWeight: 470gAccessory: Paper pattern × 1

PC-658RRated Input: 6W (100V line), 3W (70V line) Rated impedance: 100V line; 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W)/70V line; 1.7kΩ (3W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 90dB (500Hz – 5kHz pink noise)Frequency Response: 65Hz – 18kHz (peak -20dB)Speaker Component: 16cm (6") cone-typeDimensions for Fixing Hole: Mounting hole: ø170 ±5mm/Ceiling thickness: 5 – 25mm Speaker Mounting Method: Spring clampFinish: Baffle; Polypropylene resin, off-white (RAL 9010 or equivalent color)/Grille; Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø192 × 73(D)mmWeight: 500gAccessory: Paper pattern × 1

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Surface Mount Type Ceiling Speakers and Attenuator


6968

CM-960 (6W)

CP-93/97Front Grille for CM-960

CP-73/77Front Grille for CM-760

Rated Input: 6W Rated Impedance: 1.7kΩ (6W), 3.3kΩ (3W), (6.7kΩ (1.5W), 13kΩ (0.8W): Internal wiring must be changed)Sensitivity (1W, 1m): 90dBFrequency Response: 100Hz –16kHzSpeaker: 12cm dynamic cone type speakerDimensions for Fixing Hole: ø150mm (mounting hole) × 50 (ceiling thickness) mmSpeaker Mounting Method: spring catchApplicable Cables: 600V Vinyl-insulated cable (IV wire or HIV wire), Solid copper wire; ø0.8 – ø1.2mm, 7-core twisted copper wire; 0.75-1.25mm2

Connection: Push-in connector (Bridging and branch connections possible)Finish: Grille; Fire-resistant, high-impact styrene resin (resin material grade: Ul94 V-O or its equivalent), blackDimensions: 215 (W) × 134 (H) × 89 (D) mmWeight: 630gApplicable Panel: CP-70 series panel (option): CP-73, CP-77

CM-760 (6W) Rated Input: 6WRated Impedance: 1.7kΩ (6W), 3.3kΩ (3W), (6.7kΩ (1.5W), 13kΩ (0.8W): Internal wiring must be changed) Sensitivity (1W, 1m): 92dBFrequency Response: 100Hz –12kHzSpeaker: 16cm dynamic cone type speakerDimensions for Fixing Hole: ø200mm (mounting hole) × 50 (ceiling thickness) mmSpeaker Mounting Method: Spring catchApplicable Cables: 600V Vinyl-insulated cable (IV wire or HIV wire), Solid copper wire; ø0.8 – ø1.2mm, 7-core twisted copper wire; 0.75 – 1.25mm2

Connection: Push-in connector (Bridging and branch connections possible)Finish: Grille; Fire-resistant, high-impact styrene resin (resin material grade: Ul94 V-O or its equivalent), blackDimensions: 230 (W) × 174 (H) × 106.5 (D) mmWeight: 850g Applicable Panel: CP-90 series panel (option): CP-93, CP-97

Speaker Mounting Method: spring catchDimensions: ø180 × 11 (exposed section)+ 5.5mmWeight: 70gFinish: CP-73: Frame; ABS resin, off-white, net; aluminum, off-white, paintCP-77: Frame; metal, off-white, net; aluminum, off-white, paint

Speaker Mounting Method: spring catchDimensions: ø230 × 12 (exposed section)+ 6mmWeight: 100gFinish: CP-93: Frame; ABS resin, off-white, net; aluminum, off-white, paintCP-97: Frame; metal, off-white, net; aluminum, off-white, paint

Rated Input: 6W (100V line), 3W (70V line)Rated impedance: 100V line; 1.7kΩ (6W), 3.3kΩ (3W), (6.7kΩ (1.5W), 13kΩ (0.8W): Internal wiring must be changed)/70V line; 1.7kΩ (3W), 3.3kΩ (1.5W), (6.7kΩ (0.8W), 13kΩ (0.4W): Internal wiring must be changed) Sensitivity (1W, 1m): 90dB (330Hz – 3.3kHz Pink noise)Frequency Response: 100Hz – 16kHzSpeaker Component: 12cm dynamic cone-type speakerSpeaker Mounting Method: Spring catchApplicable Cables: 600V vinyl-insulated cable (1V wire or HIV wire)/Solid copper wire; ø0.8 – ø1.2mm/7-core twisted copper wire; 0.75 – 1.25mm2

Connection: Push-in connector (bridging terminal-2 branch type)Finish: Baffle: ABS-resin, off-white (RAL 9010 or equivalent color)Dimensions: ø260 × 92 (exposed section)+110mmWeight: 820g (bracket excluded)

PC-2668 (6W)

ATT-311AttenuatorApplicable speakers:PC-2668

Rated Input: 3W

PC-2268 (6W)PC-2268WP (6W)

PC-2268Rated Input: 6W (100V line), 3W (70V line)Rated impedance: 100V line; 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/70V line; 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W) Sensitivity (1W, 1m): 90dB 330 – 3,300Hz, pink noiseFrequency Response: 160Hz – 14kHz (20dB blow peak)Speaker Component: 12cm (5") cone-typeApplicable Cables: 600V vinyl-insulated cable (1V wire or HIV wire)/Solid copper wire; ø0.8 – ø1.2mm(equivalent to AWG20 – 14)/7-core twisted copper wire; 0.75 – 1.25mm2 (equivalent to AWG18 – 16)Connection: Push-in connector (bridging terminal)Operating Temperature: -10°C to +50°CFinish: Front case, Rear case: Fire-resistant HIPS resin (Resin material grade: UL-94 V-0), light grayDimensions: ø220 × 80.5 (exposed projection)Weight: 880gAccessories: Switch box mounting screw (M4 × 35) × 2, Ceiling mounting screw (4 × 35) × 2

PC-2268WPRated Input: 6W (100V line), 3W (70V line)Rated impedance: 100V line; 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/70V line; 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W) Sensitivity (1W, 1m): 90dB 330 – 3,300Hz, pink noiseFrequency Response: 160Hz – 14kHz (20dB blow peak)Speaker Component: 12cm (5") cone-typeApplicable Cables: 600V vinyl-insulated cable (1V wire or HIV wire)/Solid copper wire; ø0.8 – ø1.2mm(equivalent to AWG20 – 14)/7-core twisted copper wire; 0.75 – 1.25mm2 (equivalent to AWG18 – 16)Connection: Push-in connector (bridging terminal)Operating Temperature: -10°C to +50°CDust/Water Protection: IPX4 (conforms when the unit is installed to a flat horizontal ceiling)Finish: Front case, Rear case: Fire-resistant HIPS resin (Resin material grade: UL-94 V-0), light graySpeaker mounting bracket: Surface-treated steel plate, off-white, powder coating Dimensions: ø220 × 80.5 (unit only, exposed projection)ø150 × 5 (D)mm (speaker mounting panel, excluding mounting screw)Weight: 890g (unit only), 180g (speaker mounting panel)Accessories: Speaker mounting panel ×1, Switch box mounting screw (M4 × 35) × 2, Ceiling mounting screw (4 × 35) × 2, Speaker mounting knob × 2

Optional Accessory

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Splashproof Ceiling Speakers

Heat-Resistant Horn Speaker

Box Speakers

Firedome Speaker


7170

Rated Input: 1WInput Impedance: 10kΩSensitivity (1W, 1m): 100dBFrequency Response: 500Hz – 10kHzHeat-Resisting Temperature: With stands 380°C air current for 15 min.Dielectric Strength: 1,000V AC, 1 minute (Between input terminal and body)Installation Resistance: 500V DC, more than 10MΩ (Between input terminal and body)Speaker Angle Adjustable Range: Horizontal: 360° rotable, vertical: 90° rotableMounting Distance: 65 – 85mmFinish: Body: Incombustible used (Aluminum), off-white, paintWeight: 1.7kg (mounting bracket included)Accessory: Frame mounting clip × 2, Ceiling mounting screw × 1 set

PC-139 (1W)

Rated Power: 3WRated Impedance: 100V line: 3.3kΩ (3W), 10kΩ (1W)70V line: 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 87dBFrequency Response: 150Hz – 20kHzSpeaker Component: 8cm cone-type (Vibration section: high molecular substance)Ambient Temperature: -20°C to +60°CChemical Resistance: Resistive to formalin solvent and iodine liquid (disinfectant)Finish: Panel; alloy-coated ABS resin/ Enclosure; ABS resin/Punching net; stainless steelDimensions: ø139 × 104.5mmWeight: 550gFixing Hole Dimensions: ø100mm (Ceiling panel: Must be over 5mm in thickness, equivalent to plywood in material, and strong enough to held tapping screw)Accessory: Packing (Material: Silicon rubber) × 1, Paper pattern × 1, Ceiling mounting tapping screws (Material: Stainless steel) × 4

Rated Power: 3W, 1WRated Impedance: 3.3kΩ (3W), 10kΩ (1W)Sensitivity (1W, 1m): 88dBFrequency Response: 180Hz – 20kHz Ambient Temperature: -10°C to +50°CFinish: Frame and case; ABS resin, Off-white/Punching net; stainless steelDimensions: ø180 × 120 (D)mmWeight: 700gFixing Hole Dimensions: ø150mm (The speaker can be mounted to the ceiling panel with thickness of up to 50mm)

PC-3WR (3W)(For Shower Rooms)

PC-3CL (3W)(For Clean Rooms & Steam Sauna Rooms)

PC-1867FRated Input: 6W (100V line), 3W (70V line) Rated Impedance: 100V line: 1.7Ω (6W), 3.3kΩ (3W) (6.7kΩ (1.5W), 13kΩ (0.8W): Internal wiring must be changed)/70V line: 1.7kΩ (3W), 3.3kΩ (1.5W) (6.7kΩ (0.8W), 13kΩ (0.4W): Internal wiring must be changed)Sensitivity (1W, 1m): 90dB (330Hz – 3.3kHz pink noise)Frequency Response: 100Hz – 16kHz (without fire dome)Speaker Component: 12cm (5") cone-typeDimensional for Fixing Hole: ø156±3 (mounting hole) × 30 (maximum ceiling thickness) mmSpeaker Mounting Method: Spring catchApplicable Cables: Solid copper wire: ø0.8 – ø1.6mm (AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (AWG 18 – 16)Connection: Push-in connector (Bridging terminal-2 branch type) Finish: Baffle: Aluminum, off-white*, paint/Grille: Aluminum net, off-white*. paint/Dome mounting bracket: Steel plate, trivalent chromate treatment plating/Fire dome: Steel plate. black, paintingDimensions: ø180 × 11 (exposed section) + 110 (D)mmWeight: 1.4kg (bracket, fire dome included)Accessory: Rubber grommet × 2, Paper pattern × 1

*RAL 9010 or equivalent color

PC-1867FPC-1867FC (6W)

BS-680F (6W)

PC-1867FCRated Input: 6W (100V line), 3W (70V line) Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W)Sensitivity: 90dB (1W, 1m) (500Hz – 5kHz, pink noise)79dB (1W, 4m) (100Hz – 10kHz, pink noise) according to EN 54-2491dB (1W, 1m) (100Hz – 10kHz, pink noise) converted based on EN 54-24Maximum Sound Pressure Level: 85dB (6W, 4m) (100Hz – 10kHz, pink noise) according to EN 54-2497dB (6W, 1m) (100Hz – 10kHz, pink noise) converted based on EN 54-24Frequency Response: 160Hz – 13kHzCoverage Angle (-6dB): 500Hz: 186°, 1kHz: 178°, 2kHz: 148°, 4kHz: 76°, according to EN 54-24Environmental Type: A (indoor applications) according to EN 54-24Speaker Component: 12cm (5") cone-typeDimensional for Fixing Hole: ø156±3 (mounting hole) × 30 (maximum ceiling thickness) mmSpeaker Mounting Method: Spring catchApplicable Cables: Solid wire: ø1.0 – ø3.0mm (AWG 18 – 9)Connection: Screw connector (steatite terminal) bridgingFinish: Baffle: Aluminum, off-white*, paint/Grille: Aluminum net, off-white*. paint/Dome mounting bracket: Steel plate, trivalent chromate treatment plating/Fire dome: Steel plate. black, paintingDimensions: ø180 × 11 (exposed section) + 110 (D)mmWeight: 1.4kgAccessory: Rubber grommet × 2, Paper pattern × 1

*RAL 9010 or equivalent color

BS

BS-680FRated Input: 6W (100V line), 3W (70V line)Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/ 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W)Sensitivity (1W, 1m): 94 dB (500Hz – 5kHz, pink noise)Frequency Response: 150Hz – 20kHz (peak -20dB)Speaker Component: 16cm (6") double cone-typeApplicable Cable: Solid copper wire: ø0.8 – ø1.6mm (AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2 (AWG 18 – 16)Connection: Push-in connector (bridging terminal)Finish: Baffle, Cabinet: Steel plate, off-white (RAL 9010 or equivalent color)/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color)

Dimensions: 310 (W) × 190 (H) × 87.2 (D)mmWeight: 2.6kgAccessory: Rubber garment × 2,Speaker mounting screw (4 × 16) × 4

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

71

BS-678Rated Input: 6W (100V line), 3W (70V line)Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/ 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W)Sensitivity (1W, 1m): 94 dB (500 – 5,000Hz, pink noise)Frequency Response: 150Hz – 20kHz (peak -20dB)Speaker Component: 16cm (6") double cone-typeApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal)Finish: Baffle: HIPS resin, off-white (RAL 9010 or equivalent color)/Cabinet: Particle board with PVC sheet, off-white (RAL 9010 or equivalent color)/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color)Dimensions: 250 (W) × 190 (H) × 110 (D)mmWeight: 1.7kgAccessory: Speaker mounting screw (4 × 35) × 2

BS-678/678B (6W)BS-678T/678BT (6W)

BS-634 (6W)BS-634T (6W)BS-1034 (10W)BS-1034S (10W)

BS-634Rated Input: 6WRated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W)/70V line: 1.7kΩ (3W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 90dBFrequency Response: 120 – 18,000HzSpeaker Component: 12cm (5") cone-typeInput Terminal: M4 screw terminal, distance between barriers: 11mmFinish: Enclosure: HIPS resin (fire resistant grade UL94 V-0 or its equivalent), off-white (RAL 9010 or equivalent color)/Net: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: 210 (W) × 330 (H) × 80 (D)mmWeight: 1.3kgAccessory: Speaker receptacle × 1, Wall mounting screw × 2

BS-634TRated Input: 6WRated Impedance: 100V line: 1.7kΩ (6W)/70V line: 1.7kΩ (3W)Sensitivity (1W, 1m): 90 dBFrequency Response: 120 – 18,000HzSpeaker Component: 12cm (5") cone-typeInput Terminal: M4 screw terminal, distance between barriers: 11mmAttenuation: OFF (NC), 1 (-12dB), 2 (-6dB), 3 (0dB)Finish: Enclosure: HIPS resin (fire resistant grade UL94 V-0 or its equivalent), off-white (RAL 9010 or equivalent color)/Net: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: 210 (W) × 330 (H) × 80 (D)mmWeight: 1.3kgAccessory: Speaker receptacle × 1, Wall mounting screw × 2

BS-1034Rated Input: 10WImpedance: 100V line: 1kΩ (10W), 2kΩ (5W), 3.3kΩ (3W),10kΩ (1W)/ 70V line: 500Ω (10W),1kΩ (5W), 2kΩ (2.5W),3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 90 dBFrequency Response: 120Hz – 20kHzSpeaker Component: Low frequency: 12cm (5") cone-typeHigh frequency: Balanced dome-typeInput Terminal: M4 screw terminal, distance between barriers: 11mmFinish: Enclosure: HIPS resin (fire resistant grade UL94 V-0 or its equivalent), off-white (RAL 9010 or equivalent color)/Net: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: 210 (W) × 330 (H) × 80 (D)mmWeight: 1.4kgAccessory: Speaker receptacle × 1, Wall mounting screw × 2

BS-1034SRated Input: 10WImpedance: 100V line: 1kΩs (10W), 2kΩ (5W), 3.3kΩ (3W),10kΩ (1W)/ 70V line: 500Ω (10W),1kΩ (5W), 2kΩ (2.5W),3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 90 dBFrequency Response: 120Hz – 20kHzSpeaker Component: Low frequency: 12cm (5") cone-typeHigh frequency: Balanced dome-typeInput Terminal: M4 screw terminal, distance between barriers: 11mmFinish: Enclosure: HIPS resin (fire resistant grade UL94 V-0 or its equivalent), silver/Net: Steel plate, silver, paintDimensions: 210 (W) × 330 (H) × 80 (D)mmWeight: 1.4kgAccessory: Speaker receptacle × 1, Wall mounting screw × 2

BS-634/634T/1034

BS-1034S

BS-678BRated Input: 6W (100V line), 3W (70V line)Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/ 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W)Sensitivity (1W, 1m): 94 dB (500 – 5,000Hz, pink noise)Frequency Response: 150Hz – 20kHz (peak -20dB)Speaker Component: 16cm (6") double cone-typeApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal)Finish: Baffle: HIPS resin, black (RAL 9011 or equivalent color)/Cabinet: Particle board with PVC sheet, black (RAL 9011 or equivalent color)/Grille: Surface-treated steel plate net, black (RAL 9011 or equivalent color)Dimensions: 250 (W) × 190 (H) × 110 (D)mmWeight: 1.7kgAccessory: Speaker mounting screw (4 × 35) × 2

BS-678TRated Input: 6W (100V line), 3W (70V line)Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13k ohms (0.8W)/ 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩs (0.8W), 13kΩ (0.4W)Sensitivity (1W, 1m): 94 dB (500 – 5,000Hz, pink noise)Frequency Response: 150Hz – 20kHz (peak -20dB)Speaker Component: 16cm (6") double cone-typeApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal)Attenuation: OFF, 1 (-12dB, 2 (-6dB), 3 (0dB)Finish: Baffle: HIPS resin, off-white (RAL 9010 or equivalent color)/Cabinet: Particle board with PVC sheet, off-white (RAL 9010 or equivalent color)/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color)Dimensions: 250 (W) × 190 (H) × 110 (D)mmWeight: 1.7kgAccessory: Speaker mounting screw (4 × 35) × 2

BS-678BTRated Input: 6W (100V line), 3W (70V line)Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13k ohms (0.8W)/ 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩs (0.8W), 13kΩ (0.4W)Sensitivity (1W, 1m): 94 dB (500 – 5,000Hz, pink noise)Frequency Response: 150Hz – 20kHz (peak -20dB)Speaker Component: 16cm (6") double cone-typeApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal)Attenuation: OFF, 1 (-12dB, 2 (-6dB), 3 (0dB)Finish: Baffle: HIPS resin, black (RAL 9011 or equivalent color)/Cabinet: Particle board with PVC sheet, black (RAL 9011 or equivalent color)/Grille: Surface-treated steel plate net, black (RAL 9011 or equivalent color)Dimensions: 250 (W) × 190 (H) × 110 (D)mmWeight: 1.7kgAccessory: Speaker mounting screw (4 × 35) × 2

BS-678B/678BT

BS-678/678T

BS-680FCRated Input: 6W (100V line), 3W (70V line)Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ (1.5W), 13kΩ (0.8W)/ 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ (0.8W), 13kΩ (0.4W)Sensitivity: 94dB (1W, 1m) (500Hz – 5kHz, pink noise)77dB (1W, 4m) (100Hz – 10kHz, pink noise) according to EN 54-2489dB (1W, 1m) (100Hz – 10kHz, pink noise) converted based on EN 54-24Maximum Sound Pressure Level: 84dB (6W, 4m) (100Hz – 10kHz, pink noise) according to EN 54-2496dB (6W, 1m) (100Hz – 10kHz, pink noise) converted based on EN 54-24Frequency Response: 150Hz – 20kHzCoverage Angle (-6dB): 500Hz: 180° (horizontal and vertical)/ 1kHz: 140° (horizontal and vertical)/ 2kHz: 120° (horizontal), 110° (vertical)/ 4kHz:100° (horizontal), 80° (vertical), according to EN 54-24Environmental Type: A (indoor applications) according to EN 54-24Speaker Component: 16cm (6") double cone-type

Applicable Cables: Solid copper wire: ø1.0 – ø3mm (AWG 18 – 9)Connection: Screw connector (steatite terminal × 2) bridgingFinish: Baffle, Cabinet: Steel plate, off-white (RAL 9010 or equivalent color)/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color)Dimensions: 310 (W) × 190 (H) × 87.2 (D)mmWeight: 2.6kgAccessory: Rubber garment × 2,Speaker mounting screw (4 x 16) × 4

Note: The specification data was measured in an anechoic chamber. Reference axis; axis is on the center of grill surface and perpendicular to the grill surface. Reference plane; plane is on the grill surface and perpendicular to the reference axis. horizontal plane; plane is containing the reference axis and perpendicular the reference plane.

BS-680FC (6W)

BS

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Reflex Horns

Horn Speakers

Separate Type Horn Speakers

Box Type Splashproof Speakers

Universal Speakers

72

TH-650 TH-660

BS-5W (5W, 100V line input)Type: Sealed typeSpeaker Component: 10cm dynamic cone-type speakerRated Input: 5WImpedance: 2kΩ (5W), 3.3kΩ (3W), 5kΩ (2W)Sensitivity (1W, 1m): 90dBFrequency Response: 120 – 18,000HzOperating Temperature: -20°C – +55°CDimensions: 198 (W) × 177 (H) × 159 (D) mmWeight: 1.4kgFinish: Enclosure; Polypropylene/Grille; Aluminum

(For Shower Room/Pool Low Input BGM/FGM)• IPX1 Equivalent

BS-5W (5W)BS-10WL (10W)

BS-10WL (10W, 8Ω input)Type: Sealed typeHandling Capacity: 10W (continuous pink noise)/30W (continuous program)/100W (instantaneous peak)Sensitivity (1W, 1m): 90dBImpedance: 8ΩSpeaker Component: 10cm dynamic speakerFrequency Response: 80 – 18,000HzOperating Temperature: -20°C – +55°CDimensions: 198 (W) × 177 (H) × 159 (D) mmWeight: 1.5kgFinish: Enclosure; Polypropylene/Grille; Aluminum

* Appearance is same as BS-5W.

Enclosure: 2-way bass reflex typeRated Input: 30WImpedance: 8Ω/100V line; 330Ω (30W), 500Ω (20W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W)/70V line; 170Ω (30W), 250Ω (20W), 330Ω (15W), 500Ω (10W), 1kΩ (5W)Sensitivity (1W, 1m): 90dBFrequency Response: 80Hz – 20kHzSpeaker Components: 12 cm dynamic cone-type + dome-typeSpeaker Cable : 2-core cabtyre cord (diameter 6mm)Operating Temperature: -10°C to +50°CDust/Water Protection: IPX4 (installed vertically or horizontally*)Finish: BS-1030B: Enclosure: ABS resin, black (RAL9011 GRAPHITE BLACK), paint/Net: Surface treated steel plate, black (RAL9011 GRAPHITE BLACK), powder coating/Bracket: surface treated steel plate, black (RAL9011 GRAPHITE BLACK), powder coating

BS-1030B BS-1030W (30W)

BS-1030W

BS-1030B

BS-1030W: Enclosure: ABS resin, white (RAL9011 GRAPHITE BLACK), paint/Net: Surface treated steel plate, white, powder coating/Bracket: surface treated steel plate, white, powder coatingDimensions: 196 (W) × 290 (H) × 150 (D) mm (unit only)Weight: 2.5kg (Unit only)Accessory: Bracket × 1, Bracket mounting screw × 2, Bracket mounting washer × 2Option: Applicable bracket: BS-1030B: WB-13B, SP-410 BS-1030W: WB-13W, SP-410, SP-420 Stand: ST-16A

* Install with the front grille facing downward. Note that the splash-proof capability will be lost it installed face-up. The logo mark needs to be located in the lower section when the speaker is installed vertically, and on the right side of the speaker (as viewed from the front) when installed horizontally.

Applicable Drivers: TU-631, TU-631M, TU-651, TU-651MSensitivity: 110dB (1W, 1m) (When operated with a driver.)Frequency Response: 200Hz – 6kHz (When oper-ated with a driver.)Dust/Water Protection: IP 65 (When operated with a driver.)Driver Coupling: 1-3/8, 18 threads (inch screw)Operating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare and flange; Aluminum, off-white, powder coating/Reflector horn; ABS resin, off-white/Bracket holder and flange; Aluminum, gray, powder coating/Bracket; Steel, gray, powder coating/Screws and bolts; Stainless steelDimensions: ø500 × 394 (D)mmWeight: 2.9kg

Applicable Drivers: TU-631, TU-631M, TU-651, TU-651MSensitivity: 110dB (1W, 1m) (When operated with a driver.)Frequency Response: 200Hz – 6kHz (When oper-ated with a driver.)Dust/Water Protection: IP 65 (When operated with a driver.)Driver Coupling: 1-3/8, 18 threads (inch screw)Operating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare and flange; Aluminum, off-white, powder coating/Reflector horn; ABS resin, off-white/Bracket holder and flange; Aluminum, gray, powder coating/Bracket; Steel, gray, powder coating/Screws and bolts; Stainless steelDimensions: ø600 × 425 (D)mmWeight: 3.6kg

BS-633ARated Input: 6W (100V line), 3W (70V line)Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W)/ 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 91dBFrequency Response: 120Hz – 15kHz (-20dB)Speaker Component: 12cm (5") cone-typeApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal)Operation Temperature: -10°C – 50°CFinish: Case: ABS resin, off-white/Rear board: Hard boardDimensions: 173 (W) × 195 (H) × 101 (D)mmWall Mounting Dimensions: Case front mount: 184mm/Fixing hole mount: 120mmWeight: 780gAccessory: Speaker mounting screw (4 × 35) × 2, Speaker mounting screw (4 × 16) × 2

BS-633A/633AT (6W)

BS-633A

BS-633AT

BS-633ATRated Input: 6W (100V line), 3W (70V line)Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W)/ 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 91dBFrequency Response: 120Hz – 15kHz (-20dB)Speaker Component: 12cm (5") cone-typeApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal)Attenuation: 3W: OFF, 1 (-12dB), 2 (-6dB), 3 (0dB)6W: OFF, 1 (-13dB), 2 (-7dB), 3 (0dB)Operation Temperature: -10°C – 50°CFinish: Case: ABS resin, off-white/Rear board: Hard boardDimensions: 173 (W) × 195 (H) × 101 (D)mm (excluding volume control)Wall Mounting Dimensions: Case front mount: 184mm/Fixing hole mount: 120mmWeight: 810gAccessory: Speaker mounting screw (4 × 35) × 2, Speaker mounting screw (4 × 16) × 2

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Driver Units


SC Series

7372

TU-631M (30W)TU-651M (50W)

Applicable Horns: TH-650 and TH-660Rated Input: TU-631: 30 W / TU-651: 50 WRated Impedance: 16ΩSensitivity: 110dB (1W, 1m) (When operated with JIS C 5504 standard horn.)Frequency Response: 150Hz – 6kHz (When oper-ated with JIS C 5504 standard horn.)Dust/Water Protection: IP65 (When a driver is operated with a horn.)Horn Coupling: 1 – 3/8 18 threads (inch screw)Polarity: Hot; Black, Com; WhiteOperating Temperature: -20°C – +60°C (must be free from dew condensation)Finish: Flange; Aluminum, gray, powder coating/Rear cover; ABS resin, gray/Screws; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: ø139 × 106 (D)mmWeight: TU-631: 1.4kg / TU-651: 1.9kgOption: Driver unit cover; UC-200A/Matching transformer; TM-30T, TM-60T

TU-631 (30W)TU-651 (50W)

Applicable Horns: TH-650 and TH-660Rated Input: TU-631M: 30 W / TU-651M: 50WLine Voltage: 100V line or 70V lineRated Impedance: TU-631M: 100V line; 330Ω (30W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W)/70V line; 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W) /TU-651M: 100V line; 200Ω (50W), 330Ω (30W), 670Ω (15W)/70V line; 100Ω (50W), 200Ω (25W), 330Ω (15W), 670Ω (7.5W)Sensitivity: 110dB (1W, 1m) (When operated with JIS C 5504 standard horn.) Frequency Response: 150Hz – 6kHz (When oper-ated with JIS C 5504 standard horn.)Dust/Water Protection: IP65 (When a driver is oper-ated with a horn.) Horn Coupling: 1-3/8, 18 threads (inch screw) Polarity: Hot; Black, Com; White Operating Temperature: -20°C to +60°C (must be free from dew condensation)Finish: Flange; Aluminum, gray, powder coating/Rear cover; ABS resin, gray/Screws; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: ø139 × 149 (D)mmWeight: TU-631M: 1.9kg / TU-651M: 2.7kgOption: Driver unit cover; UC-200A

Rated Input: 10WLine Voltage: 100V line or 70V lineRated Impedance: 100V line: 1kΩ (10W), 2kΩ (5W), 3.3kΩ (3W), 10kΩ (1W)/70V line: 500Ω (10W), 1kΩ (5W), 2kΩ (2.5W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sound Pressure Level: 110dB (1W, 1m at 500 to 2.5kHz peak level)Frequency Response: 315Hz – 12.5kHzSensitivity (0dB = 1mW/10 dynes/cm2): -24dB at 1kHz (when used as Microphone)Dust/Water Protection: IP65Polarity: Hot: Black, Com: WhiteOperating Temperature: -20°C – +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn and rear cover; ABS resin, off-white/Bracket, Screws and bolts; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: 172 (W) × 161 (H) × 188 (D)mmWeight: 1.2kgOption: Swivel bracket; YS-151S (Can be used instead of the supplied bracket.)

SC-610M (10W)

Rated Input: 10W (Mobile mount use; 5W)Rated Impedance: 8ΩSound Pressure Level: 110dB (1W, 1m at 500 to 2.5kHz peak level)Frequency Response: 315Hz – 12.5kHzSensitivity (0dB = 1mW/10 dynes/cm2): -24dB at 1kHz (when used as Microphone)Dust/Water Protection: IP65Polarity: Hot: Black, Com: WhiteOperating Temperature: -20°C – +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn and rear cover; ABS resin, off-white/Bracket, Screws and bolts; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: 172 (W) × 161 (H) × 188 (D)mmWeight: 1kgOption: Swivel bracket; YS-151S (Can be used instead of the supplied bracket.)

SC-610 (10W)

SC-615M (15W) Rated Input: 15WLine Voltage: 100V line or 70V lineRated Impedance: 100V line: 670Ω (15W), 1kΩ (10W), 2kΩ (5W), 3.3kΩ (3W)/70V line: 330Ω (15W), 670Ωs (7.5W), 1kΩ (5W), 2kΩ (2.5W), 3.3kΩ (1.5W)Sound Pressure Level: 112dB (1W, 1m at 500Hz to 2.5kHz peak level) Frequency Response: 280Hz – 12.5kHzSensitivity (0dB = 1mW/10 dynes/cm2): -22dB at 1kHz (when used as Microphone)Dust/Water Protection: IP65Polarity: Hot: Black, Com: WhiteOperating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn and rear cover; ABS resin, off-white/Bracket, Screws and bolts; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: 222 (W) × 179 (H) × 234 (D)mmWeight: 1.3kgOption: Swivel bracket; YS-151S (Can be used instead of the supplied bracket.)

SC-615 (15W) Rated Input: 15W (Mobile mount use; 10W)Rated Impedance: 8ΩSound Pressure Level: 112dB (1W, 1m at 500Hz to 2.5kHz peak level)Frequency Response: 280Hz – 12.5kHzSensitivity (0dB = 1mW/10 dynes/cm2): -22dB at 1kHz (when used as Microphone)Dust/Water Protection: IP65Polarity: Hot: Black, Com: WhiteOperating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn and rear cover; ABS resin, off-white/Bracket, Screws and bolts; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: 222 (W) × 179 (H) × 234 (D)mmWeight: 1.1kgOption: Swivel bracket; YS-151S (Can be used instead of the supplied bracket.)

UC-200ADriver Unit Cover

Cover to protect and extend operating life of Driver units: TU-631, TU-631M, TU-651 and TU-651M.

Note: Avoid installing the speaker in locations which vibrate considerably, or under environments easy to be oil-contaminated.

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

TC Series

7574

SC-630 (30W)

Rated Input: 30WLine Voltage: 100V line or 70V lineRated Impedance: 100V line: 330Ω (30W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W)/70V line: 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)Sound Pressure Level: 113dB (1W, 1m at 500Hz to 2.5kHz peak level)Frequency Response: 250Hz – 10kHzSensitivity (0dB = 1mW/10 dynes/cm2): -20dB at 1kHz (when used as Microphone)Dust/Water Protection: IP65Polarity: Hot: Black, Com: WhiteOperating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn and rear cover; ABS resin, off-white/Bracket, Screws and bolts; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: 285 (W) × 227 (H) × 277 (D)mmWeight: 2kgOption: Swivel bracket; YS-151S (Can be used instead of the supplied bracket.)

SC-630M (30W)

Rated Input: 30W (Mobile mount use; 15W)Rated Impedance: 8ΩSound Pressure Level: 113dB (1W, 1m at 500Hz to 2.5kHz peak level)Frequency Response: 250Hz – 10kHzSensitivity (0dB = 1mW/10 dynes/cm2): -20dB at 1kHz (when used as Microphone)Dust/Water Protection: IP65Polarity: Hot: Black, Com: WhiteOperating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn and rear cover; ABS resin, off-white/Bracket, Screws and bolts; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: 285 (W) × 227 (H) × 277 (D)mmWeight: 1.7kgOption: Swivel bracket; YS-151S (Can be used instead of the supplied bracket.)

TC-631 (30W) Rated Input: 30WRated Impedance: 16ΩSensitivity (1W, 1m): 110dBFrequency Response: 200Hz – 6kHzDust/Water Protection: IP65Polarity: Hot; Black/Com; WhiteOperating Temperature: -20°C to +60°C (must be free from dew condensation) Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn; ABS resin, off-white/Bracket holder; Aluminum, gray, powder coating/Bracket; Steel, gray, powder coating/Rear cover; ABS resin, gray/Screw and bolts; Stainless steel/Speaker Cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: ø500 × 463 (D) mmWeight: 4.1kgOption: SP-201, YS-60B, ST-16A

Rated Input: 15WLine Voltage: 100V line or 70V lineRated Impedance: 100V line: 670Ω (15W), 1kΩ (10W), 2kΩ (5W), 3.3kΩ (3W)/70V line: 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 108dBFrequency Response: 250Hz – 7kHzDust/Water Protection: IP65Polarity: Hot; Black/Com; WhiteOperating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn; ABS resin, off-white/Bracket holder; Aluminum, gray, powder coating/Bracket; Steel, gray, powder coating/Rear cover; ABS resin, gray/Screw and bolts; Stainless steel/Speaker Cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: ø400 × 376 (D) mmWeight: 3.2kg

TC-615M (15W)

Rated Input: 15WRated Impedance: 8ΩSensitivity (1W, 1m): 108dBFrequency Response: 250Hz – 7kHzDust/Water Protection: IP65Polarity: Hot; Black/Com; WhiteOperating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn; ABS resin, off-white/Bracket holder; Aluminum, gray, powder coating/Bracket; Steel, gray, powder coating/Rear cover; ABS resin, gray/Screw and bolts; Stainless steel/Speaker Cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: ø400 × 376 (D) mmWeight: 3kg

TC-615 (15W)

TC-631M (30W) Rated Input: 30WLine Voltage: 100V line or 70V lineRated Impedance: 100V line: 330Ω (30W), 670Ωs (15W), 1kΩ (10W), 2kΩ (5W)/70V line: 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)Sensitivity (1W, 1m): 110dBFrequency Response: 200Hz – 6kHzDust/Water Protection: IP65Polarity: Hot; Black/Com; WhiteOperating Temperature: -20°C to +60°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn; ABS resin, off-white/Bracket holder; Aluminum, gray, powder coating/Bracket; Steel, gray, powder coating/Rear cover; ABS resin, gray/Screw and bolts; Stainless steel/Speaker Cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: ø500 × 463 (D) mmWeight: 4.5kg

SC-651 (50W) Rated Input: 50W (Mobile mount use; 30W)Rated Impedance: 16ΩSensitivity (1W, 1m): 109dBFrequency Response: 250Hz – 6kHzDust/Water Protection: IP65Polarity: Hot: Black, Com: WhiteOperating Temperature: -20°C to +55°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn; ABS resin, off-white/Bracket, Steel, gray, powder coating/Bracket holder: Alumi-num, gray, powder coating/Rear cover; ABS resin, gray/Screws and bolts; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: 430(W) × 297.5 (H) × 327 (D)mmWeight: 3.4kg Option: Swivel bracket; YS-151S (Can be used instead of the supplied bracket.)

TC-651M (50W) Rated Input: 50WLine Voltage: 100V line or 70V lineRated Impedance: 100V line: 200Ω (50W), 330Ω (30W), 670Ω (15W)/70V line: 100Ω (50W), 200Ω (25W), 330Ω (15W), 670Ω (7.5W)Sensitivity (1W, 1m): 111dBFrequency Response: 200Hz – 6kHzDust/Water Protection: IP65Polarity: Hot; Black/Com; WhiteOperating Temperature: -20°C to +60°C (must be free from dew condensation)Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn; ABS resin, off-white/Bracket holder; Aluminum, white, powder coating/Bracket; Steel, gray, powder coating/Rear cover; ABS resin, gray/Screw and bolts; Stainless steel/Speaker Cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length)Dimensions: ø400 × 376 (D) mmWeight: 4kg

Note: Avoid installing the speaker in locations which vibrate considerably, or under environments easy to be oil-contaminated.

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Ultra-High Power Speaker

Explosion-Proof Horn Speakers*

Wide Range Horn Speakers (Weatherproof)

75

TM-60TMatching Transformer

Impedance: Primary: 290Ω (35W), 250Ω (40W), 220Ω (45W), 200Ω (50W), 180Ω (55W), 170Ω (60W)/Secondary: 4Ω, 8Ω, 16ΩFrequency Response: 80Hz – 16kHzDimensions: 96 (W) × 96 (H) × 98 (D) mmWeight: 1.3kg

Input: 240WImpedance: 8Ω × 4Frequency Response: 250Hz – 5kHzSensitivity (1W, 1m): 107dBAdjustable Angle Range: Vertical; 8.5° upward, 14° downwardRequired Terminals: ø21mm/2-pin round connectorFinish: Horn; Aluminum die-casting, Ivory/Cover; Surface treated steel plate, Ivory/Driver Unit Case; Weatherproof ABS resin/Bracket; Equal angle steel, Ivory/Horn Mounting Bolts; Dichromate-plated ironDimensions: 598 (W) × 251 (H) × 654 (D) mmWeight: 28kgAccessory: Driver unit case × 1, Connection cord × 1, YR-2120 × 4Speaker Input Method: ø21mm/2-pin receptacle

SC-240 (240W)

TP-M15D (15W)Rated Input: 15WImpedance: 670Ω (15W), 1kΩ (10W), 2kΩ (5W)Frequency Response: 300Hz – 5.5kHzSensitivity (1W, 1m): 104dBExplosion-proof: eG4 (Increased safety explosion-proof)Standard Environmental Condition: Temperature: -20°C to +40°CElevation: 1,000m or lessRelative humidity: 45 – 85%Others: Dust, corrosive gas or vibration which requires special considerations to be provided in the explosion-prof facility must not existFinish: Horn; IvoryOthers; Dark grayBracket materials: Surface zinc treated steel plate (SECC, t3.2)Dimensions: ø397 × 475mmWeight: 4.9kg

TP-M15E (15W) Rated Input: 15WImpedance: 670Ω (15W), 1kΩ (10W), 2kΩ (5W)Frequency Response: 350Hz – 4.5kHzSensitivity (1W, 1m): 104dBExplosion-proof: eG4 (Increased safety explosion-proof)Standard Environmental Condition: Temperature: -20°C to +40°CElevation: 1,000m or lessRelative humidity: 45 – 85%Others: Dust, corrosive gas or vibration which requires special considerations to be provided in the explosion-proof facility must not exist.Finish: Horn; IvoryOthers; Dark grayBracket materials: Surface zinc treated steel plate (SECC, t3.2)Dimensions: ø242 × 368mmWeight: 4.3kg

[Poor Installation Location Examples]1) Locations where vessels are damaged due to corrosion or deterioration, causing explosive gas to escape.2) Locations which emit explosive gas due to malfunctions, or high temperature or high pressure as a result of irregular reaction.3) Locations which can create an explosive atmosphere when the ventilation device fails and explosive gas stays.4) Peripheral areas of or rooms adjacent to locations which can create an explosive atmosphere in a normal state and the explosive gas rarely enters such areas or rooms.

Rated Input: 6WRated Impedance: 100 V line; 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W)/70 V line; 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 96dBFrequency Response: 130Hz – 13kHzSpeaker Component: 12cm cone-type (treated for splash proof) Speaker Cord: 2-core cabtyre cord with diameter of 6mmOperating Temperature: -20°C to +55°CFinish: Horn, cover; ABS resin, off-white, paintBracket; Stainless steelPunched net; Surface treated steel plate, dark-gray, powder coatingScrew; Stainless steel Dimensions: 233 (W) × 224 (H) × 208 (D)mm Weight: 1.5kg

CS-64 (6W)

CS-304 (30W) Rated Input: 30WRated Impedance: 100V line; 330Ω (30W), 500Ω (20W), 1kΩ (10W)/70V line; 170Ω (30W), 330Ω (15W), 500Ω (10W), 1kΩ (5W)Sensitivity (1W, 1m): 98dBFrequency Response: 120Hz – 15kHzSpeaker Component: 12cm cone-typeHorizontal Directivity: Constant directivity horn 90° (±45° horizontal from front axis)/93dB or less (1W, 1m), 3kHz at ±45°Speaker Cord: 2-core cabtyre cable with diameter of 6mmOperating Temperature: -20°C to +55°CDust/Water Protection*2: IP65Finish: Horn, cover; ABS resin, off-white, paint/Bracket; Stainless steel/Net; Aluminum, gray, paint/Screw; Stainless steelDimensions: 366 (W) × 230 (H) × 272 (D)mmWeight: 3.1kg

Rated Input: 15WRated Impedance: 100V line; 670Ω (15W), 1kΩ (10W), 2kΩ (5W)/70V line; 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)Sensitivity (1W, 1m): 97dBFrequency Response: 150Hz – 15kHzSpeaker Component: 12cm cone-typeHorizontal Directivity: Constant directivity horn 90° (±45° horizontal from front axis)/93dB or less (1W, 1m), 3kHz at ±45°Speaker Cord: 2-core cabtyre cord with diameter of 6mmOperating Temperature: -20°C to +55°CDust/Water Protection*2: IP65Finish: Horn, cover; ABS resin, off-white, paint/Bracket; Stainless steel/Net; Aluminum, gray, paint/Screw; Stainless steelDimensions: 366 (W) × 230 (H) × 272 (D)mmWeight: 2.8kg

CS-154 (15W)

• IPX4 Equivalent*2

*2 Do not install the speaker face-up from a horizontal plane nor in such a way that the paper cone is exposed to direct sunlight. If water accumulates on the paper cone, or ultraviolet rays are radiated on it, this may cause the paper cone to deteriorate, leading to speaker malfunction.

Installation Locations* Locations where flammable gas and vapor of flammable liquid are mixed together under the abnormal condition, creating an atmosphere close to the threshold of explosion,* The TP-M15E/TP-M15D cannot be used in locations that can periodically create an explosive atmosphere when used or operated normally.

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Pendent Speakers

Column Speakers and Optional Accessories

Interior Design SpeakersProjection Speakers

7776

Input: Rated 20W (Max. 30W)Rated Impedance: 100V line: 500Ω (20W), 1kΩ (10W)Sensitivity (1W, 1m): 93dBFrequency Response: 15Hz – 10kHzSpeaker Component: 12cm cone-type × 4Water Protection: IPX3 equivalentFinish: Enclosure; Extruded aluminum, Silver gray, fully-glazed, baked paint/Grille; Punched net, black, matte, baked paint/Mounting bracket; silver gray, fully-glazed, baked paintDimensions: 167 (W) × 580 (H) × 141 (D) mmWeight: 5.1kg (unit only), 5.7kg (including mounting bracket)Accessory: Mounting bracket × 2, Mounting bolt, washer, packing × 1 set

TZ-205 (20W)Metal Case Type(Splashproof—For Use Under Roof Eaves)

Input: Rated 10W (Max. 15W)Rated Impedance: 1kΩ (10W), 2kΩ (5W)Frequency Response: 150Hz – 10kHzSensitivity (1W, 1m): 90dBWater Protection: IPX3 equivalentFinish: Enclosure; Extruded aluminum, Silver gray, fully-glazed, baked paint/Grille; Punched net, black, matte, baked paint/Mounting bracket; silver gray, fully-glazed, baked paintDimensions: 167 (W) × 335 (H) × 141 (D) mmWeight: 3.4kg (unit only), 4kg (including mounting bracket) Speaker Component: 12cm cone-type speaker 2 pcs.Accessory: Mounting bracket × 2, Mounting bolt, washer, packing × 1 set

TZ-105 (10W)Metal Case Type(Splashproof—For Use Under Roof Eaves)

PE-304Enclosure: Bass-reflex typeRated Input: 30W (100V , 70V line, 8Ω) Rated Impedance: 100V line: 330Ω (30W), 500Ω (20W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W)/70V line: 170Ω (30W), 250Ω (20W), 330Ω (15W), 500Ω (10W), 1kΩ (5W)/8ΩSensitivity: 91dB (1W, 1m) (500Hz – 5kHz, pink noise)Frequency Response: 70Hz – 20kHz (peak -20dB)Speaker Component: 12cm (5") cone-type + balanced dome tweeterSpeaker Cord: 2-core cabtyre cord 5mApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal-2 branch type)Finish: Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color)/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø186 × 251(H) mm (unit only)Weight: 2.1kg (unit only)Accessory: Ceiling bracket × 1, Mounting hanger × 1, Ceiling cover × 1, Speaker mounting screw (4 × 16) × 4

PE-64Enclosure: Bass-reflex typeRated Input: 6W (100V line), 3W (70V line) Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W)/70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 90dB (500Hz – 5kHz, pink noise)Frequency Response: 100Hz – 18kHz (peak -20dB)Speaker Component: 12cm (5") cone-typeSpeaker Cord: 2-core cabtyre cord 5mApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)/Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)/7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)Connection: Push-in connector (bridging terminal-2 branch type)Finish: Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color)/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø186 × 251(H) mm (unit only)Weight: 1.5kg (unit only)Accessory: Ceiling bracket × 1, Mounting hanger × 1, Ceiling cover × 1, Speaker mounting screw (4 × 16) × 4

PJ-304Enclosure: Bass-reflex typeRated Input: 30W (100V line, 70V line, 8Ω) Rated Impedance: 100V line: 330Ω (30W), 500Ω (20W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W)/70V line: 170Ω (30W), 250Ω (20W), 330Ω (15W), 500Ω (10W), 1kΩ (5W)/8ΩSensitivity: 91dB (1W, 1m) (500Hz – 5kHz, pink noise)Frequency Response: 70Hz – 20kHz (peak -20dB)Speaker Component: 12cm (5") cone-type + balanced dome tweeterSpeaker Cord: 2-core cabtyre cord 5mFinish: Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color)/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø186 × 369 (H) mmWeight: 2.1kg (unit only)Accessory: Swivel bracket × 1, Speaker mounting screw (4 × 16) × 3

PJ-64Enclosure: Bass-reflex typeRated Input: 6W (100V line), 3W (70V line) Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10 kΩ (1W)/70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 10 kΩ (0.5W)Sensitivity (1W, 1m): 90dB (500Hz – 5kHz, pink noise)Frequency Response: 100Hz – 18kHz (peak -20dB)Speaker Component: 12cm (5") cone-typeSpeaker Cord: 2-core cabtyre cord 5mFinish: Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color)/Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paintDimensions: ø186 × 369 (H) mmWeight: 1.5kg (unit only)Accessory: Swivel bracket × 1, Speaker mounting screw (4 × 16) × 3

PE-64 (6W)PE-304 (30W)

PJ-64 (6W)PJ-304 (30W)

Input Power: 20W (50V, 70V, 100V line)Impedance: 50V line; 125Ω (20W), 250Ω (10W), 500Ω (5W), 1kΩ (2.5W), 2kΩ (1.25W)/70V line; 250Ω (20W), 500Ω (10W), 1kΩ (2.5W), 2kΩ (1.25W)/100V line; 500Ω (20W), 1kΩ (10W), 2kΩ (5W)Preset Impedance: 500ΩSensitivity (1W, 1m): 95dB at 1kHzSpeaker Diameter: 16cmFrequency Response: 50Hz – 20kHzFinish: Cabinet, Cover: ABS resin, off-white/Bracket: SPCC, off-whiteDimensions: 200 (W) × 255 (H) × 250 (D) mmWeight: 2.5kg

PJ-200W (20W)

Input Power: 10W (50V, 70V, 100V line)Impedance: 50V line; 250Ω (10W), 500Ω (5W), 1kΩ (2.5W), 2kΩ (1.25W), 4kΩ (0.63W)/70V line; 500Ω (10W), 1kΩ (5W), 2kΩ (2.5W), 4kΩ (1.25W)/100V line; 1kΩ (10W), 2kΩ (5W), 4kΩ (2.5W)Preset Impedance: 1kΩSensitivity (1W, 1m): 92dB at 1kHzSpeaker Diameter: 12cmFrequency Response: 65Hz – 15kHzFinish: Cabinet, Cover: ABS resin, off-white/Bracket: SPCC, off-whiteDimensions: 160 (W) × 200 (H) × 195 (D) mmWeight: 1.8kg

PJ-100W (10W)

AccessoriesSpeaker Mounting Brackets

Outdoor useYS-301For TZ-105/205

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Impedance Meter

OthersWeatherproof Garden Speaker


Wall Flush-Mount Speakers and Optional Accessories

77

Enclosure: Sealed typeRated Input: 30W (100V line), 15W (70V line)Rated Impedance: 100V line: 330Ω (30W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W), 3.3kΩ (3W)/70V line: 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 87dBFrequency Response: 100Hz – 8kHzSpeaker Component: 12cm splash-proof cone-type Input Terminal: Push-in terminalApplicable Cable: Solid copper wire: ø0.8 – ø1.6mm/Stranded copper wire: 0.75 – 1.25mm2

Water Protection: Requirements to IPX4 Finish: Top cover and base: FRP resin, dark gray, semi-gloss, paint/Speaker panel: ABS resin, dark gray, semi-gloss, paint/Legs: Aluminum, dark gray, semi-gloss, paintDimensions: ø270 × 335 (H)mmWeight: 2.4kgAccessory: TOA label × 2

* Photo shows TOA label attached.

GS-302 (30W)

PC-391TRated Input: 3WRated Impedance: 3.3kΩ, 10kΩSensitivity (3W, 1m):: 90.7dBFrequency Response: 150Hz – 18kHzSpeaker Component: 7.7cm cone-type speaker Attenuation: 0 (OFF), 1 (-12dB), 2 (-6dB), 3 (0dB)Finish: Baffle; Stainless steel/Grille: Aluminum, silverDimensions: 162 (W) × 115 (H) × 47 (D) mmWeight: 600gAccessories: Switch box mounting screw × 4, Speaker mounting screw × 4, Wood screw × 4

PC-391Rated Input: 3WRated Impedance: 3.3kΩ, 10kΩSensitivity (3W, 1m): 90.7dBFrequency Response: 150Hz – 18kHzSpeaker Component: 7.7cm cone-type speakerFinish: Baffle; Stainless steel/Grille: Aluminum, silver Dimensions: 162 (W) × 115 (H) × 43 (D) mmWeight: 560gAccessories: Switch box mounting screw × 4, Speaker mounting screw × 4, Wood screw × 4

PC-391/391T (3W)

Back Boxes for PC-391/391T

Finish: Beige melamine frosted coatingWeight: 0.55kg

YS-13ASurface-Mounted Type

Finish: Heavy chrome platingWeight: 0.41kg

YC-150EFlush-Mounted Type

Finish: Zinc-platingWeight: 0.7kg

YC-150Flush-Mounted Type

SP-131Pole Mount Bracket

• For SC-610/610M/615/615M/ SC-630/630M• Load Capacity: 5kg• 2 unit in set

YS-60BPole Band

• Applicable Pole: Approx. ø90 – ø340mm

SP-201Wall and Pole Mount Bracket

• For TH-650/660, SC-610/610M/615/ SC-615M/630/630M, TC-615/615M/630/630M• Load Capacity: 10kg• Can mount speaker on a ø200 – ø340mm pole in conjunction with YS-60B

SP-301Wall Mount Bracket

• For SC-610/610M/615/615M/ SC-630/630M• Load Capacity: 5kg

AT-063P/303P/603PAttenuators Input Range: AT-063P; 0.5W – 6W/AT-303P;

0.5W – 30W/AT-603P; 0.5W – 60WAttenuation: 5 steps (0dB, -6dB, -12dB, -18dB, OFF)Usable Cable: 600V vinyl-insulated cable (Indoor vinyl or heat-resistant indoor vinyl cable)/Solid Cable; ø0.8 – 1.2mm/Stranded Cable (7 cores); 0.75 – 1.25 mm2 Terminal: Push-in connector (bridging terminal)Finish: Knob/Panel/Plate; ABS resin, Milk white/Case; ABS resin, Black

YS-4CF/4CMSpeaker Connectors

YS-4CFConnector: XLR-4-31-F77Current Capacity: 10A (AC)Usable Cable: 600V vinyl-installed cable with diameter of 0.8 – 1.6mm or sectional area of 0.9 – 2.0mm2 Usable Plate: YP-1AFUsable Plug: XLR-4-12CFinish: Cover; ABS resin (Off-white)/Frame; Steel plate (t1.2)Dimensions: 45 (W) × 110 (H) × 53 (D) mmWeight: 950g

YS-4CMConnector: XLR-4-32-F77Current Capacity: 10A (AC)Usable Cable: 600V vinyl-installed cable with diameter of 0.8 – 1.6mm or sectional area of 0.9 – 2.0mm2

Usable Plate: YP-1AFUsable Plug: XLR-4-11CFinish: Cover; ABS resin (Off-white)/Frame; Steel plate (t1.2)Dimensions: 45 (W) × 110 (H) × 53 (D) mmWeight: 800g

Range × 1: 5Ω – 1kΩRange × 10: 50Ω – 10kΩRange × 100: 500Ω – 100kΩ

ZM-104AImpedance Meter

Finish: Aluminum hairline Dimensions (W × H × D): 70 × 120 × 6mmWeight: 25g

YP-1AFCover Plate

• Cover plate for YS-4CF and YS-4CM.

• Finish: High-impact sterol resin, Milky white• Dimensions (W × H × D): 70 × 120 × 40mm• Weight: 60g

YS-11AWall Mounting Back Box

• Surface-Mounting Back Box

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

TS-900/TS-800 Series Infrared Wireless Conference Systems

78

TS-901Chairman Unit

TS-900(CE/UL version)Central Unit

Power Source: 100 – 240V AC, 50/60Hz (supplied from AC adapter (accessory))Power Consumption: 72WInput: MIC 1 (Base Language): -60dB*, 600Ω, unbalanced, phone jack/MIC 2 (Translation Language): -60dB*, 600Ω, unbalanced, phone jack/AUX 1 (Base Language): -20dB*, 10kΩ, unbalanced, phone jack/AUX 2 (Translation Language): -20dB*, 10kΩ, unbalanced, phone jack/AUX 3 (Base and Translation Language): -20dB*, 10kΩ, unbalanced, phone jackOutput: LINE: -20dB*, 10kΩ, unbalanced, phone jack/REC: -20dB*, 10kΩ, unbalanced, phone jack, RCA pin jack/HEADPHONE: Mini jackNumber of Connectable Chairman/Delegate Units: 96 unitsNumber of Connectable Infrared Transmitter/Receiver Units: 4 units (up to 16 units by using four distributors)Infrared Transmitter/Receiver I/O Terminal: 4 BNC jacksExternal Control Terminal: D-sub connector (9 P, male)LED Indicator: Voting result indicators 1 – 3 (7-segment LED, double-digit number), Audio signal receiving indicators 1 – 4 CH, Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashed when a Chairman/Delegate unit's battery nears complete discharge)Function Switch: Simultaneous speaker No. setting switch:

Power Source: 7.4V DC (battery), 9 VDC (AC adapter (supplied from BP-900 battery (option) or AD-0910 AC adapter (option))Current Consumption: 270mAInfrared Emitter/DetectorWavelength: 870nm (AM: Brightness modulation)Modulation Method: Frequency modulationCarrier Frequency: Transmission: Audio channel 1: 7.35MHz, Audio channel 2: 8.10MHz, Audio channel 3: 8.55MHz, Audio channel 4: 9.15MHz, Control channel: 6.45MHz/Reception: Base language channel: 1.95MHz, Translation language channel: 2.25MHzAcceptance Angle: Vertical: 90°, Horizontal: 120° Emission Angle: Vertical: 90°, Horizontal: 120° Covering Range: 7m (radius)

Input: Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904)

Conference Systems

1/2/4/Mic-off setting switch: TIME OUT ON/OFF/Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first units, and last-in-first-out for the subsequent units)Microphone Mix/Cut Switch (for the Base Language): MIC/CUT (Mix): Chairman/Delegate units + MIC 1 + AUX 1 + AUX 3 ➝Base Language/(Cut): MIC 1 + AUX 1 + AUX 3 ➝Base LanguageMicrophone Mix/Cut Switch (for the Translation Language): MIC/CUT (Mix): Chairman/Delegate units + MIC 2 + AUX 2 + AUX 3 (Translation Language)/(Cut): MIC 2 + AUX 2 + AUX 3 (Translation Language)AUX 3 Mixing Select Switch: MIC/CUT (Mix): AUX 3 input is relayed to the line output./(Cut): AUX 3 input is not relayed to the line output.Operating Temperature: 0°C to +40°CFinish: Panel: Surface-treated steel plate, gray metallic, paint, semi-glossDimensions: 359 (W) × 118.8 (H) × 138.2 (D) mmWeight: 2.8 kgAccessory: AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord) × 1Option: Rack mounting bracket: MB-TS900

*0 dB = 1 V

Output: Monitor speaker: 8Ω, 0.2W/Headphone: Mini jack × 2LED Indicator: Speech indicator (flashers when the unit is out of communications range), Voting status indicators 1 – 3 (flashes when the unit is out of communications range or when the battery level is low), Power indicator (flashes when the unit is out of communications range or when the battery level is low)Battery Life: Approx. 10 hours (when the fully-charged BP-900 battery is used with “During speech” to “Standby” ratio of 1:2)Operating Temperature: 0°C to +40°CFinish: Top panel: ABS resin, gray metallic, paint, semi-glossDimensions: 210 (W) × 65.9 (H) × 152 (D) mmWeight: 640 gOption: Microphone: TS-903, TS-904 (Select either one)/Lithium-ion battery: BP-900/AC adapter: AD-0910

TS-902Delegate Unit

TS-800(CE/UL version)Central Unit

Power Source: 100 – 240V AC, 50/60Hz (supplied from AC adapter (accessory))Power Consumption: 72WInput: MIC: -60dB*, 600Ω, unbalanced, phone jack/AUX: -20dB*, 10kΩ, unbalanced, phone jackOutput: REC: -20dB*, 10kΩ, unbalanced, phone jack, RCA pin jack/HEADPHONE: Mini jackNumber of Connectable Chairman/Delegate Units: 64 unitsNumber of Connectable Infrared Transmitter/Receiver Units: 4 units (up to 16 units by using four distributors)Infrared Transmitter/Receiver I/O Terminal: 4 BNC jacksExternal Control Terminal: D-sub connector (9 P, male)LED Indicator: Audio signal receiving indicators 1 – 4 CH, Data signal receiving indicator, External control priority indica-tor, External control communication indicator, Power indicator, Battery indicator (flashed when a Chairman/Delegate unit's battery nears complete discharge)

Power Source: 7.4V DC (battery), 9V DC (AC adapter)(supplied from BP-900 battery (option) or AD-0910 AC adapter (option))Current Consumption: 270mAInfrared Emitter/DetectorWavelength: 870nm (AM: Brightness modulation)Modulation Method: Frequency modulationCarrier Frequency: Transmission: Audio channel 1: 7.35MHz, Audio channel 2: 8.10MHz, Audio channel 3: 8.55MHz, Audio channel 4: 9.15MHz, Control channel: 6.45MHz/Reception: Base language channel: 1.95MHz, Translation language channel: 2.25MHzAcceptance Angle: Vertical: 90°, Horizontal: 120° Emission Angle: Vertical: 90°, Horizontal: 120° Covering Range: 7m (radius)


Output: Monitor speaker: 8Ω, 0.2W/Headphone: Mini jack × 2LED Indicator: Speech indicator (flashers when the unit is out of communications range), Voting status indicators 1 – 3 (flashes when the unit is out of communications range or when the battery level is low), Power indicator (flashes when the unit is out of communications range or when the battery level is low)Battery Life: Approx. 10 hours (when the fully-charged BP-900 battery is used with “During speech” to “Standby” ratio of 1:2)Operating Temperature: 0°C to +40°CFinish: Top panel: ABS resin, gray metallic, paint, semi-glossDimensions: 210 (W) × 65.9 (H) × 152 (D) mmWeight: 640 gOption: Microphone: TS-903, TS-904 (Select either one)/Lithium-ion battery: BP-900/AC adapter: AD-0910

Function Switch: Simultaneous speaker No. setting switch: 1/2/4/Mic-off setting switch: TIME OUT ON/OFF/Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) Operating Temperature: 0°C to +40°CFinish: Panel: Surface-treated steel plate, gray metallic, paint, semi-glossDimensions: 359 (W) × 118.8 (H) × 138.2 (D) mmWeight: 2.7 kgAccessory: AC adapter (Cord length: 1.8m DC cord, and 2m detachable AC cord) × 1Option: Rack mounting bracket: MB-TS900

*0 dB = 1 V

TS-801Chairman Unit

Power Source: 7.4V DC (battery), 9V DC (AC adapter)(supplied from BP-900 battery (option) or AD-0910 AC adapter (option))Current Consumption: Max. 270mAInfrared DetectorWavelength: 870nm (AM: Brightness modulation)Modulation Method: Frequency modulationCarrier Frequency: Transmission: Audio channel 1: 7.35MHz, Audio channel 2: 8.10MHz, Audio channel 3: 8.55MHz, Audio channel 4: 9.15MHz, Control channel: 6.45MHz/Reception: Audio channel: 1.95MHzAcceptance Angle: Vertical: 90°, Horizontal: 120° Emission Angle: Vertical: 90°, Horizontal: 120° Covering Range: 7m (radius)


Output: Monitor speaker: 8Ω, 0.2W/Headphone: Mini jack × 2LED Indicator: Speech indicator (flashers when the unit is out of communications range), Power indicator (flashes when the unit is out of communications range or when the battery level is low) Battery Life: Approx. 10 hours (when the fully-charged BP-900 battery is used with “During speech” to “Standby” ratio of 1:2)Operating Temperature: 0°C to +40°CFinish: Top panel: ABS resin, gray metallic, paint, semi-matteDimensions: 210 (W) × 65.9 (H) × 152 (D) mmWeight: 630 gOption: Microphone: TS-903, TS-904 (Select either one)/Lithium-ion battery: BP-900/AC adapter: AD-0910

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

7978

TS-802Delegate Unit

Power Source: 7.4V DC (battery), 9V DC (AC adapter)(supplied from BP-900 battery (option) or AD-0910 AC adapter (option))Current Consumption: Max. 270mAInfrared DetectorWavelength: 870nm (AM: Brightness modulation)Modulation Method: Frequency modulationCarrier Frequency: Transmission: Audio channel 1: 7.35MHz, Audio channel 2: 8.10MHz, Audio channel 3: 8.55MHz, Audio channel 4: 9.15MHz, Control channel: 6.45MHz/Reception: Base language channel: 1.95MHz, Translation language channel: 2.25MHzAcceptance Angle: Vertical: 90°, Horizontal: 120° Emission Angle: Vertical: 90°, Horizontal: 120° Covering Range: 7m (radius)

Input: Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904)Output: Monitor speaker: 8Ω, 0.2W/Headphone: Mini jack × 2LED Indicator: Speech indicator (flashers when the unit is out of communications range), Power indicator (flashes when the unit is out of communications range or when the battery level is low)Battery Life: Approx. 10 hours (when the fully-charged BP-900 battery is used with “During speech” to “Standby” ratio of 1:2)Operating Temperature: 0°C to +40°CFinish: Top panel: ABS resin, gray metallic, paint, semi-matteDimensions: 210 (W) × 65.9 (H) × 152 (D) mmWeight: 630 gOption: Microphone: TS-903, TS-904 (Select either one)/Lithium-ion battery: BP-900/AC adapter: AD-0910

TS-903Microphone

Type: Electret condenser microphoneDirectivity: UnidirectionalRated Impedance: 1.8kΩRated Sensitivity: -37dB (1 kHz 0 dB = 1 V/Pa)LED Indicator: Speech indicator (ring type)Frequency Response: 100Hz – 13kHzOutput Connector: Combined type of XLR-4-32Finish: Gooseneck: Stainless steel, black/Other: ABS resin, blackWeight: 90 gApplicable Unit (Option): Chairman/Delegate units: TS-801, TS-802, TS-901, TS-902

TS-904Microphone

Type: Electret condenser microphoneDirectivity: UnidirectionalRated Impedance: 1.8kΩRated Sensitivity: -37dB (1 kHz 0 dB = 1 V/Pa)LED Indicator: Speech indicator (ring type)Frequency Response: 100 – 13,000 HzOutput Connector: Combined type of XLR-4-32Finish: Gooseneck: Stainless steel, black/Other: ABS resin, blackWeight: 105 gApplicable Unit (Option): Chairman/Delegate units: TS-801, TS-802, TS-901, TS-902

TS-907TS-905Infrared Transmitter/Receiver

TS-905Power Source: 24V DC (supplied from the optional TS-900 or TS-800)Current Consumption: Max. 150mAInfrared Emitter/DetectorWavelength: 870nm (AM: Brightness modulation)Modulation Method: Frequency modulationCarrier Frequency: Transmission: Audio channel 1: 7.35MHz, Audio channel 2: 8.10MHz, Audio channel 3: 8.55MHz, Audio channel 4: 9.15MHz, Control channel: 6.45 MHz/Reception: Base language channel: 1.95MHz/Translation language channel: 2.25MHzAcceptance Angle: Vertical: 150° (75° + 75°), Horizontal: 360° Emission Angle: Vertical: 150° (75° + 75°), Horizontal: 360° Covering Range: Approx. 6 – 7m in radius from the point underneath the unit (Ceiling height: 2.5 – 4.5m)

Connection Terminal: BNC jackLED Indicator: PowerOperating Temperature: 0°C to +40°CFinish: Dome: PC resin, visible light cut filter/Base: ABS resin, blackDimensions: ø120 × 71.3 (H) mmWeight: 230 g (unit only)Accessory: Mounting bracket × 1, Stand mounting bracket × 1, Stand mounting bracket attaching screw × 3, Thread adapter (U5/16 – NS5/8) × 1Option: Microphone stand (The mounting thread size must be U5/16 or NS5/8)

TS-907Power Source: 24V DC (supplied from the optional TS-900 or TS-800)Current Consumption: Max. 180mAInfrared Emitter/DetectorWavelength: 870nm (AM: Brightness modulation)Modulation Method: Frequency modulationCarrier Frequency: Transmission: Audio channel 1: 7.35MHz, Audio channel 2: 8.10MHz, Audio channel 3: 8.55MHz, Audio channel 4: 9.15MHz, Control channel: 6.45MHz/Reception: Base language cannel: 1.95MHz/Translation language channel: 2.25MHzAcceptance Angle: Vertical: 90° (45° + 45°), Horizontal: 360° Emission Angle: Vertical: 90° (45° + 45°), Horizontal: 360° Covering Range: Approx. 6m in radius from the point underneath the unit (Ceiling height: 5 – 7m)

Connection Terminal: BNC jackLED Indicator: PowerOperating Temperature: 0°C to +40°CFinish: Dome: PC resin, visible light cut filter/Base: ABS resin, blackDimensions: ø120 × 71.3 (H) mmWeight: 230 g (unit only)Accessory: Mounting bracket × 1, Stand mounting bracket × 1, Stand mounting bracket attaching screw × 3, Thread adapter (U5/16 – NS5/8) × 1Option: Microphone stand (The mounting thread size must be U5/16 or NS5/8)

YW-1022Distributor

Frequency Range: 1.6 – 1,000 MHz (excluding 50 – 70 MHz)Distribution Loss: 4.5 dB ±3 dB (between the Mix-ing and each Distribution terminals)Input/Output Impedance: 75 ohmsCoaxial Connector: Mixing terminal: BNC jack, power passing type (under 30 V DC, under 2 A)/Distribution 1 and 2 terminals: BNC jack, power passing type (under 30 V DC, under 1 A)Operation Temperature: -10°C to +50°CFinish: ABS resin, grayDimensions: 75 (W) × 122 (H) × 34 (D) mmWeight: 105 g

YW-1024Distributor

Frequency Range: 1.6 – 1,000 MHz (excluding 50 – 70 MHz)Distribution Loss: 8.5 dB ±3 dB (between the Mix-ing and each Distribution terminals)Input/Output Impedance: 75 ohmsCoaxial Connector: Mixing terminal: BNC jack, power passing type (under 30 V DC, under 2 A)/ Distribution 1 – 4 terminals: BNC jack, power pass-ing type (under 30 V DC, under 1 A)Operation Temperature: -10°C to +50°CFinish: ABS resin, grayDimensions: 75 (W) × 122 (H) × 34 (D) mmWeight: 120 g

AD-0910(CE/US version)AC Adapter

Power Source: 100 – 240 V AC, 50/60 HzOutput: 9 V DC, 1 ARipple Voltage: 100 mV (p-p)Power Consumption: 400 mA AC, Input 100 VCord Length: 1.8 mPlug: RC6705, center “+”Operating Temperature: 0°C to +40°CFinish: Case: PC/ABS alloy, blackWeight: 190 gAccessory: AC power cord (2 m) × 1

BC-900(CE/UL version)Battery Charger

Power Source: 100 – 240 V AC, 50/60 Hz (supplied from AC adapter (accessory))Current Consumption: Max. 5 ACharging Time: Approx. 5 hoursCharging Capacity: 8 BP-900 batteries (option)LED Indicator: Charging status (Green: Full charge, Red: On charge), Power indicatorOperating Temperature: 0°C to +40°CFinish: Case: Steel, black, paint/Battery recep-tacles: PPO resin, black Dimensions: 240 (W) × 70 (H) × 115 (D) mmWeight: Unit: 1.1 kg, AC adapter: 520 gAccessory: AC adapter (Cord length: 1.5 m DC cord, and 2 m detachable AC cord) × 1

BP-900RechargeableLithium-IonBattery

Nominal Voltage: 7.4 V DCNominal Capacity: 1700 mAhOperating Temperature: 0°C to +40°CDimensions: 71.6 (W) × 20.4 (H) × 37.6 (D) mmWeight: 95 gAccessory: Terminal protection cover (pre-installed at the factory) × 1

MB-TS900Rack Mount Bracket

Finish: Surface-treated steel plate, gray metallic, paint, semi-glossDimensions: 65.5 (W) × 177 (H) × 61 (D) mmWeight: 680 gAccessory: Rack mounting screw × 4, /Rack mounting washer × 4

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

TS-800/900 Series System Image

80

Speakers

Amplifiers and other peripheral equipment

Distributor: YW-1024 (4-branch distributor) orDistributor: YW-1022 (2-branch distributor)

Recording units such as DATs, cassette and minidisk recorders.

Wired microphone (1 line)

Music and other program sources (1 line)

Infrared Transmitter/Receiver Unit: TS-905/TS-907(Connectable up to 16 units (TS-905) and

up to 12units (TS-907))

Coaxial cable

Central Unit: TS-800• Auxiliary external inputs (AUX: 1, MIC: 1)• External PC control compatible (Customized software is

Battery Charger: BC-900Lithium ion batteries only are used in chairman's and delegate's unitsNumber of battery charging slots: 8

Chairman’s Unit: TS-801Delegate’s Unit: TS-802• Operates on AC adaptor or batteries.• Operates on lithium ion batteries (available separately)• The chairman's unit features a Priority Speech button.• Optional standard or gooseneck microphones to use with the chairman's and delegate's units. (Maximum number of units: up to 64)

TS-800 Series

(Number of units: up to 64)

Speakers

Amplifiers and other peripheral equipment

Recording units such as DATs, cassette and minidisk recorders.

PC Wired microphone (2 lines)

Music and other program sources (3 lines)

Coaxial cable

Central Unit: TS-900• Display to show vote results. • Auxiliary external inputs (AUX: 3, MIC: 2)• External PC control compatible (Customized software is

Chairman’s Unit: TS-901Delegate’s Unit: TS-902• Operates on AC adaptor or batteries.• Operates on lithium ion batteries (available separately)• The chairman's unit features a Priority Speech button.• Optional standard or gooseneck microphones to use with the chairman's and delegate's units. (Maximum number of units: up to 96)

TS-900 Series• Voting function• 2-channel monitoring

(Number of units: up to 96)

TS-902

TS-902

TS-901

TS-802

TS-802

TS-801

PC

Battery Charger: BC-900Lithium ion batteries only are used in chairman's and delegate's unitsNumber of battery charging slots: 8

Distributor: YW-1024 (4-branch distributor) orDistributor: YW-1022 (2-branch distributor)

Infrared Transmitter/Receiver Unit: TS-905/TS-907(Connectable up to 16 units (TS-905) and

up to 12units (TS-907))

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

TS-770 Series Conference Systems

81

TS-770(CE/CU version)Central Unit

Power Source: 230V AC (CE version)/120VAC (CU version), 50/60 HzPower Consumption: Max. 60WRated Output: 35V DC, 650mA × 2Input: MIC: -60dB*, 600Ω, unbalanced, phone jack/AUX: -20dB*, 600Ω, unbalanced, phone jackOutput: Recording: -20dB*, 10kΩ, unbalanced, phone jack, RCA jack × 2Equalizer Insertion Terminals: Input: -20dB*, 10kΩ, pin jack/Output: -20dB*, 10kΩ, pin jackExpansion IN/OUT Terminals: Input: -20dB*, 10kΩ, pin jack × 2/Output: -20dB*, 10kΩ, pin jack × 2/Control: 10kΩ or more, voltage output, pin jack × 2

Power Source: 35V DC, under 30mA (supplied from Central Unit)Input: -60dB*, 200Ω, balanced, mini phone jack with VR controlOutput: -60dB*, 22Ω, balanced, mini phone jack with VR controlSpeech Mode: AUTO: Voice-activated Automatic switching/MANUAL: Talk key on-off switchingOperating Temperature:0°C – 40°COperating Humidity: 90 % or less RH (no conden-sation)Finish: Pre-coated steel plate, blackDimensions: 160 (W) × 41.8 (H) × 100 (D) mm (excluding projection)Weight: 700g

* 0dB = 1V

Power Source: 35V DC, under 30mA (supplied from Central Unit)Output: Headphone/Recording: 32Ω (headphone)/10kΩ, -20 dB* (recording), unbalanced, mini jack (with VR)/Internal speaker: 130Ω, 200mW/Contact output: 24V DC, max. 50mAControl: Speech button: Microphone, speaker on-off control by speech switch/Priority button: Microphone and speaker on-off control, other mi-crophone, speaker on-off, other microphone cutoff, and single-tone chime activationOperating Temperature: 0°C – 40°COperating Humidity: Under 90 % RH (no conden-sation)Finish: Case: ABS resin, black/Panel: ABS resin, gray metallic, semi-gloss, paintDimensions: 114.5 (W) × 78.4 (H) × 152.9 (D)mmWeight: 780gOption: Microphone: TS-773 (standard), TS-774 (long) (select either one)

* 0dB = 1V

TS-773 and TS-774 MicrophonesType: Electret condenser microphoneDirectivity: UnidirectionalRated Impedance: 1.8kΩRated Sensitivity: -37dB (1 kHz, 0dB = 1V/Pa)LED Indicator: Speech Indicator (ring type)Frequency Response: 100 – 13,000 HzOutput Connector: Combined type of XLR-4-32Finish: Gooseneck: Stainless steel, black/Other: ABS resin, blackLength: TS-773: 368mm/TS-774: 518mmWeight: TS-773: 90g/TS-774: 105gApplicable Unit (Option): TS-771 Chairman unit, TS-772 Delegate unit

Connector: DIN socket (8P, unit's rear-mounted connector side), DIN plug (8P, unit's cord connector side)Length: YR-770-2M: 2m/YR-770-10M: 10m

Control: Priority Speech chime: Operation of TS-771's priority button activates a single-tone chime/Speaker restriction: Number of simultaneously-usable TS-772s and TS-775s can be set to 1, 3, or 6/Automatic Mic-off: Function OFF/20 s/40 s (selectable)Number of Connectable Conference Units: 70 (max. 35 units per line), Max. 210 (when 3 expansion amplifiers)Operating Temperature: 0°C – 40°COperating Humidity: Under 90 % RH (no condensation)Finish: Pre-coated steel plate, black, 30% glossyDimensions: 210 (W) × 107.1 (H) × 316 (D) mmWeight: 4kgOption: Extension cord: YR-770-2M, YR-770-10M

* 0dB = 1V

TS-771Chairman Unit

TS-772Delegate Unit

Power Source: 35V DC, under 30mA (supplied from Central Unit)Output: Headphone/Recording: 32Ω(headphone)/10kΩ, -20 dB* (recording), unbalanced, mini jack (with VR)/Internal speaker: 130Ω 200mW/Contact output: 24V DC, max. 50mAControl: Microphone, speaker on-off control by speech switchOperating Temperature: 0°C to 40°COperating Humidity: Under 90 % RH (no conden-sation)Finish: Case: ABS resin, black/Panel: ABS resin, gray metallic, semi-gloss, paintDimensions: 114.5 (W) × 78.4 (H) × 152.9 (D)mmWeight: 780gOption: Microphone: TS-773 (standard), TS-774 (long) (select either one)

* 0dB = 1V

TS-775Remote Delegate Interface Unit

YR-770-2MYR-770-10MExtension Cord

TS-773/774Microphone

TS-774TS-773

TS-770 Central unit

TS-770 Central unit

TS-770 Central unit

TS-771 Chairman unit



PC PC

TS-772 Delegate units

TS-772 Delegate unit

TS-772 Delegate unit

Telephone bodyTelephone handset

Handset modular connector

TS-775 Remote Delegate Interface unit

TS-775 Remote Delegate Interface unit

PABXC/O

Internet

TS-770 Series System Image

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

UHF Wireless Systems and Optional Accessories

82

Wireless Microphone Systems

Microphone Element: Dynamic microphone unit: CardioidFrequency Range: 576 - 865MHz, UHF*1

Channel Selectable: 64 channels (the number of channels may differ from country to country)RF Carrier Power: 50mW or lessTone Frequency: 32.768kHz Oscillator: PLL synthesizerMaximum Input Level: 142dB SPLMaximum Deviation: ±40kHzAudio Frequency Response: 80Hz – 15kHzDynamic Range (AF Circuit): 95dB or more (with WT-5800)Battery: AA alkaline dry cell batteryBattery Life: Approx. 10 h (when the alkaline battery is used)Indication: Power/Battery lampAntenna: Built-in typeOperating Temperature: -10°C – +50°C (except battery)Finish: Dark grayDimensions: ø48 × 244mmWeight: 340g (with battery)

WM-5225 UHF Hand-held (Speech) Wireless Microphone

Microphone Element: Dynamic microphone unit: UnidirectionalFrequency Range: 576 – 932MHz, UHF*1

Channel Selectable: 64 channels (the number of channels may differ from country to country)RF Carrier Power: 50mW or lessTone Frequency: 32.768kHz Oscillator: PLL synthesizerMaximum Input Level: 126dB SPLMaximum Deviation: ±40kHzAudio Frequency Response: 100Hz – 15kHzDynamic Range: 95dB or more (with WT-5800)Battery: WB-2000 rechargeable battery (option) or AA alkaline dry cell batteryBattery Life: Approx. 13 h (when the WB-2000 rechargeable battery is used)Approx. 10 h (when the alkaline battery is used)Indication: Power/Battery indicatorAntenna: Built-in typeOperating Temperature: -10°C to +50°C (except battery)Finish: Resin, coatingDimensions: ø43.6 × 231.5mmWeight: 180g (with battery)

Microphone Element: Dynamic microphone unit: UnidirectionalFrequency Range: 576 – 865MHz, UHF*1

Channel Selectable: 64 channels (the number of channels may differ from country to country)RF Carrier Power: 50mW or lessTone Frequency: 32.768kHz Oscillator: PLL synthesizerMaximum Input Level: 132dB SPLMaximum Deviation: ±40kHzAudio Frequency Response: 100Hz – 15kHzDynamic Range (AF Circuit): 95dB or more (with WT-5800)Battery: WB-2000 rechargeable battery (0ption) or AA alkaline dry cell batteryBattery Life: Approx. 13 h (when the WB-2000 rechargeable battery is used)Approx. 10 h (when the alkaline battery is used)Indication: Power/Battery indicatorAntenna: Built-in typeOperating Temperature: -10°C to +50°C (except battery)Finish: Resin, coatingDimensions: ø50 × 229mmWeight: 205g (with battery)

WM-5265 UHF Hand-held (Vocal) Wireless Microphone

WM-5325 UHF Wireless Transmitter

Frequency Range: 576 – 932MHz, UHF*1

Channel Selectable: 64 channels (the number of channels may differ from country to country)RF Carrier Power: 50mW or lessTone Frequency: 32.768kHz Oscillator: PLL synthesizerMaximum Input Level: -14dB to -29dB* (Audio level control: Min. to Max.)Maximum Deviation: ±40kHzAudio Frequency Response: 100Hz – 15kHzDynamic Range (AF Circuit): 95dB or more (with WT-5800)Battery: WB-2000 rechargeable battery (0ption) or AA alkaline dry cell batteryBattery Life: Approx. 13 h (when the WB-2000 rechargeable battery is used)Approx. 10 h (when the alkaline battery is used)Indication: Power/Battery indicatorAntenna: Built-in typeConnector: ø3.5mm mini plugOperating Temperature: -10°C to +50°C (except battery)Finish: Resin, coatingDimensions: 62 (W) × 102.5 (H) × 23 (D)mmWeight: 90g (with battery)

YP-M5300Unidirectional Lavalier Microphone

Type: Electret condense typeDirectivity: UnidirectionalSensitivity: -63dB ±3dB (0dB = 1V/0.1 Pa, 1kHz)Frequency Response: 100Hz – 12kHzMaximum Input Level: 120dB SPLCord Length: 1.3mConnector: ø3.5mm mini plugFinish: Dark blackWeight: 20g (cable included)

WM-4300UHF Lavaliere Wireless Microphone

Transmitter unitFrequency Range: 690 – 865MHz, UHF*1

Channel Selectable: 64 Selectable frequencies (international may vary)RF Carrier Power: Less than 50mWTone Frequency: 32.768kHzOscillator: PLL synthesizerMaximum Input Level: 120dB SPLBattery: 6LR61 (9 V × 1)Battery Life: 10h (alkaline)Indication: Power/Battery indicator (common use)Antenna: 1/4 λ helical antennaOperating Temperature: -10°C to +50°CFinish: Resin, coating (change other's)Dimensions: 62 (W) × 142 (H) × 32 (D) mmWeight: 135g (with battery)Accessory: Screwdriver × 1, Storage case × 1 Microphone unitMicrophone: Electret condenser microphone, CardioidCable Length: 1.3mConnector: TA-4 (XLR-type)

WM-5270 UHF Hand-held (Vocal) Wireless Microphone

WH-4000PWaist Pouch

YP-M5310Omni-directional Lavalier Microphone

Type: Electret condense typeDirectivity: OmnidirectionalSensitivity: -64dB ±3dB (0dB = 1V/0.1 Pa, 1kHz)Frequency Response: 100Hz – 15kHzMaximum Input Level: 110dB SPLCord Length: 1.3mConnector: ø3.5mm mini plugFinish: Dark blackWeight: 20g (cable included)

WH-4000HHeadset Microphone

Type: Electret condense typeDirectivity: UnidirectionalSensitivity: -66dB ±3dB (0dB = 1V/0.1 Pa, 1kHz)Maximum Input Level: 120dB SPLCord Length: 1.3mConnector: ø3.5mm mini plugFinish: Frame: Stainless, black (silicon rubber)Gooseneck: Iron, chrome-plated, black (shrink tube)Weight: 50g (cable included)

WH-4000AHeadset Microphone

Type: Electret condense typeDirectivity: UnidirectionalSensitivity: -66dB ±3dB (0dB = 1V/0.1 Pa, 1kHz)Maximum Input Level: 120dB SPLCord Length: 1.3mConnector: ø3.5mm mini plugFinish: Headband: EVA, blackFrame: Stainless, black (silicon rubber)Gooseneck: Iron, chrome-plated, black (shrink tube)Weight: 50g (cable included)

WH-4000SWindscreen

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

83

WT-5800UHF Wireless Tuner

Power Source: AC mains (supplied AC adapter must be used)Power Consumption: 250mA (12V DC)Receiving Frequency: 576 – 865MHz, UHF*1

Channel Selectable: 64 Selectable frequenciesReceiving System: Double super-heterodyneDiversity System: Space diversity (true diversityMixing Output: MIC: -60 dB*2, 600Ω, unbalanced, XLR-3-31 type connector/LINE: -20 dB*2, 600Ω, unbalanced, phone jackMixing Input: -20 dB*2, 10kΩ, unbalanced, phone jackAntenna Input: 75Ω, BNC (phantom powering for antenna), 9V DC, 30mA (max)Antenna Output: 75Ω, BNC (Gain 0dB)Receiving Sensitivity: 90dB or more, S/N ratio (20dBµV input, 40kHz deviation)Squelch Sensitivity: 16 – 40dBµV variable

Squelch System: Using together of noise SQ, carrier SQ and tone SQTone Frequency: 32.768kHzIndication: Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarmChannel Check: Usable frequencies scanningS/N Ratio: 110dB or more (A-weight, balanced output)Harmonic Distortion: 1% or less (typical)Frequency Response: 100Hz –15kHz, ±3dBOperating Temperature: -10°C to +50°CFinish: Resin, blackDimensions: 210 (W) × 44 (H) × 205.1 (D) mmWeight: 700gAccessory: AC adapter × 1, Whip antenna × 2, Rubber foot × 4Option: Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit), MB-WT4 (for rack mounting two WT-5800 units)



Channel Selectable: 64 Selectable frequenciesReceiving System: Double super-heterodyneDiversity System: Space diversityMixing Output: MIC: -60 dB*2, 600Ω, unbalanced, XLR-3-31 type connector/LINE: -20 dB*2, 600Ω, unbalanced, phone jackMixing Input: -20 dB*2, 10kΩ, unbalanced, phone jackAntenna Input: 75Ω, BNC (phantom powering for antenna, 9V DC, 30mA (max)Receiving Sensitivity: 90dB or more, S/N ratio (20dBµV input, 40kHz deviation)Squelch Sensitivity: 16 – 40dBµV variable Squelch System: Using together of noise SQ, carrier SQ and tone SQ

Tone Frequency: 32.768kHzIndication: Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarmChannel Check: Usable frequencies scanningS/N Ratio: 110dB or more (A-weight, balanced output)Harmonic Distortion: Under 1% (typical)Frequency Response: 100Hz –15kHz, ±3dBOperating Temperature: -10°C to +50°CFinish: Resin, blackDimensions: 210 (W) × 44 (H) × 205.1 (D) mmWeight: 700gAccessory: AC adapter × 1, Whip antenna × 2, Rubber foot × 4Option: Mounting bracket kit: MB-WT3 (for rack mounting one WT-5805 unit), MB-WT4 (for rack mounting two WT-5805 units)



Channel Selectable: 16 channelsReceiving System: Double super-heterodyneDiversity System: Space diversityMixing Output: MIC: -60 dB*2, 600Ω, balanced, XLR-3-32 type connector/LINE: -20 dB*2, 600Ω, unbalanced, phone jackMixing Input: -20 dB*2, 10kΩ, unbalanced, phone jackAntenna: Rod antennaReceiving Sensitivity: 90dB or more, S/N ratio (20dBµV input, 40kHz deviation)Squelch Sensitivity: 16 – 40dBµV variable

Squelch System: Using together of noise SQ, carrier SQ and tone SQTone Frequency: 32.768kHzIndication: ANT A/B, Audio (peak), Battery alarm, Channel No.Channel Check: Usable frequencies scanningS/N Ratio: 104dB or more (A-weight, balanced output)Harmonic Distortion: 1% or less (typical)Frequency Response: 100Hz –15kHz, ±3dBOperating Temperature: -10°C to +50°CFinish: Resin, blackDimensions: 206 (W) × 40.6 (H) × 152.7 (D) mmWeight: 590gAccessory: AC adapter × 1


Power Source: AC mains (supplied AC adapter must be used)Power Consumption: 250mA (12V DC when operating with two tuner modules)Receiving Frequency: 576 – 865MHz, UHF*1

Mixing Input: -20dB*2, 10kΩ, unbalanced phone jackAudio Output: Mixing/Channel 1 (selectable): -20dB*2 (+6dB*2 max.), 600Ω, unbalanced, phone jack/-14dB*2 (+12dB*2 max.), 600Ω, balanced, XLR-3-31 type connector/Channel 2: -20dB* (+6dB* max.), 600Ω, unbalanced, phone jackAntenna Input: 75Ω, BNC (phantom powering for antenna), 9V DC, 30mA (max)Antenna Output: 75Ω, BNC (Gain 0dB)Indication: ANT A/B, Audio (peak), PowerS/N Ratio: 102dB or more (A-weight, balanced output)Harmonic Distortion: 1% or less

Frequency Response: 50Hz –18kHz, ±3dBOperating Temperature: -10°C to +50°CFinish: Resin, blackDimensions: 210 (W) × 44 (H) × 181 (D) mmWeight: 770g (without tuner module)Accessory: AC adapter × 1, Whip antenna × 2, Rubber foot × 4Option: Mounting bracket kit: MB-WT3 (for rack mounting one WT-4820 unit), MB-WT4 (for rack mounting two WT-4820 units)

Power Source: 230V (120V/230V selectable)Power Consumption: 25WFrequency Range: VHF/UHFAntenna Input: 2 input (front × 1, rear × 1), 75Ω, BNC (phantom powering for antenna)Antenna Output: 4 output, 75Ω, BNCDC Power Supply: 4 output, (each output: 13V DC/250mA)Indication: Power

WD-4800Antenna Distributor

Operating Temperature: -10°C to +50°CFinish: Steel, coatingDimensions: 420 (W) × 44 (H) × 305.5 (D)mmWeight: 3.5kgAccessory: DC cable × 4Option: Rack mounting bracket: MB-15B

WT-5100 UHF Portable Receiver

Power Source: 1.5V DC (Battery)Receiving Frequency: UHF band (16 ch)Receiving System: Double super-heterodyneReceiving Sensitivity: Better than 60dB SN ratio(20dBμV input, ±40kHz deviation)Frequency Response: 200Hz – 5kHz (Portabletransmitter to Portable receiver)De-emphasis: 50μsOutput Level: 4mW (16 load, 10% distortion)Battery: WB-2000 rechargeable battery (option) orLR6/AA alkaline dry cell batteryBattery Life: 16 hours (when the WB-2000 re-chargeable battery is used)15 hours (when the alkaline battery is used)Operation Temperature: -10°C to +40°COperation Humidity: 30% to 85% RH (no conden-sation)Finish: Resin, dark silverDimensions: 62 (W) × 163.6 (H) × 32.5 (D)mmWeight: 120g (battery included)Accessory: Neck strap × 1Option: Ni-MH battery: WB-2000-2Assist earphone: YP-E5000

YP-E5000Assist Earphone

Type: Dynamic typeImpedance: 16ΩFrequency Response: 300Hz – 15kHzRated Sensitivity: 88dB (0dB = 2 x 10-5 Pa, 10mW)Input: Max. 50mWTerminal: ø3.5mm mini plug (3-pole)Finish: BlackWeight: 17gAccessory: Ear-pad × 1, Suspension ring* × 2

* Three different sizes are available for the suspension ring.L: 68 × 47 mm / M: 64 × 45 mm / S: 60 × 43 mm

YP-E401Ear-SuspensionEarphone

Type: Dynamic typeImpedance: 16ΩFrequency Response: 300Hz – 15kHzRated Sensitivity: 88dB (0dB = 2 x 10-5 Pa, 10mW)Input: Max. 50mWTerminal: ø3.5mm mini plug (3-pole)Finish: BlackWeight: 17gAccessory: Ear-pad × 1, Suspension ring* × 22

* Three different sizes are available for the suspension ring.L: 68 × 47 mm / M: 64 × 45 mm / S: 60 × 43 mm

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Wireless Meeting Amplifiers

84

Power Source: L version: 120V /H version: 230V AC or Dry cells-8 pcs. (R20P or D size)Power Consumption: UK,H: AC: 44W (rated output)/ LT, L: AC: 43W (rated output)Rated Output: AC: 20W (Max. 40W with EXT SP.)/ DC: 8WBattery Life: Dry cell battery: Approx. 12 (WA-1822) hours (WA-1822C 6 hours) Frequency Response: 70Hz – 10kHz (deviation 3dB)Distortion: Under 10% (rated output)Input: Wired mic: -48dB*, 600Ω / AUX: -20dB*, 10kΩOutput: External Speaker: 8 – 16Ω/over 20W of rated input "Internal speaker and external speaker "or" external speaker only" (selectable) / Line/Rec.: -10dB*, 1kΩS/N Ratio: Over 70dB (rated output)Antenna: Rod antennaInternal Speaker: 20cm full range speaker + tweeterOperation Temperature: AC: -10°C to +50°C/ DC: 0°C to +40°CFinish: ABS resin, light grayDimensions: 298 (W) × 460 (H) × 200 (D)mmWeight: WA-1822: 6kg / WA-1822C: 6.7kg Accessory: Power cord (2m) × 1, Dust cover × 1, Screwdriver × 1Option: UHF Wireless Tuner Unit: WTU-4800

Cassette Deck Section (WA-1822C only)Reproduction System: Auto-reverse Track System: 2-track/1 channel (monaural)Usable Tape: Normal tapeRecording Method: AC biasErasing Method: AC erasureTape Speed: 4.8cm/secWow and flutter: 0.2% WRMSFast Forward/Rewind Time: Approx. 130 sec. (C-60 tape)

* 0dB = 1V

WA-1822Wireless Meeting Amplifier

WA-1822CCassette-Equipped Wireless Meeting Amplifier(L/H version)

*1 Frequency range dependent on individual country regulatory codes.*2 0dB = 1 V

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

YW-4500UHF Wireless Antenna

•Dipoleratiorelativegain: more than 8dB•Wall-mountable

WTU-4800UHF Wireless Tuner Unit

Power Source: 7 – 12V DCCurrent Consumption: 100mAReceiving Frequency: 576 – 865MHz, UHF*1

Receiving System: Double super-heterodyneReceiving Sensitivity: 80dB or more, S/N ratio (20dBµV input, 40kHz deviation)Antenna Input Impedance: 75ΩDiversity System: Space diversityChannel Selectable: 16 channelsSquelch System: Noise SQSquelch Sensitivity: 17dBµVOutput: 0dB*2 (maximum deviation, 2.2kΩ load)THD: 1% or lessFrequency Response: 100Hz – 12kHz, ±3dBOperating Temperature: -10°C to +50°CFinish: Tin plated steelDimensions: 60 (W) × 25 (H) × 139 (D)mmWeight: 130gAccessory: Driver for channel changing × 1

Power Source: 7 – 12V DC (supplied from amplifier or tuner)Current Consumption: 15mA or lessReceiving Frequency: 550 – 880MHz, UHFDipole Ratio Relative Gain: 8dB or more (780MHz)V.S.W.R: 3.0 or lessOutput Impedance: 75ΩMounting Hole Pitch: 83.5mm (dimensions for wiring box)Operating Temperature: -10°C to +50°CFinish: ABS resin, off-whiteDimensions: 105 (W) × 140 (H) × 126 (D)mmWeight: 270gAccessory: M3.5 screw for wiring box × 2, Tapping screw (M4) for wooden wall × 2, RG-6/U or RG-11U sleeve × 1

BC-5000-2Battery Charger

Power Source: 12 V DC (optional AC adapterAD-5000-2 must be used)Power Consumption: 700mACharging Time: Max. 3 hoursNumber of wireless microphones to be chargedsimultaneously: 2 piecesOperating Temperature: 0°C to +40°COperating Humidity: 30% to 85% RHFinish: Case: ABS resin, metallic gray/Microphone receptacle section: PPE resin, blackDimensions: 238 (W) × 105 (H) × 98 (D)mmWeight: 500g (with mounting adapters attached)Accessory: Mounting adapter × 2Option: Rechargeable battery: WB-2000-2(containing 2 pieces), AC adapter: AD-5000-2


Power Source: 12 V DC (optional AC adapterAD-5000-6 must be used)Power Consumption: 2.2ACharging Time: Max. 3 hoursNumber of wireless microphones to be chargedsimultaneously: 6 piecesOperating Temperature: 0°C to +40°COperating Humidity: 30% to 85% RHFinish: Case: Steel plate, black, paint/Microphone receptacle section: PPE resin, blackDimensions: 390 (W) × 118 (H) × 131 (D)mmWeight: 2kg (with mounting adapters attached)Accessory: Mounting adapter × 6Option: Rechargeable battery: WB-2000-2(containing 2 pieces), AC adapter: AD-5000-6


Power Source: 12 V DC (optional AC adapterAD-5000-6 must be used)Power Consumption: 4.4ACharging Time: Max. 3 hoursNumber of wireless microphones to be chargedsimultaneously: 12 piecesOperating Temperature: 0°C to +40°COperating Humidity: 30% to 85% RHFinish: Case: Steel plate, black, paint/Microphone receptacle section: PPE resin, blackDimensions: 390 (W) × 118 (H) × 246 (D)mmWeight: 3.4kg (with mounting adapters attached)Accessory: Mounting adapter × 12Option: Rechargeable battery: WB-2000-2(containing 2 pieces), AC adapter: AD-5000-6

AD-5000-2AC Adapter

Power Source: 100 – 240V AC, 47 – 63Hz, 1AOutput: 12V DC, 2ARipple Voltage: 120mV p-pCord Length: 1.8mPlug: Type of plug differs depending on the countrywhere the unit is usedOperating Temperature: 0° to +40°CFinish: Case: PC/ABS alloy, blackWeight: 175gAccessory: Power cord (2m) × 1

AD-5000-6AC Adapter

Power Source: 100 – 240V AC, 47 – 63Hz, 1AOutput: 12V DC, 5ARipple Voltage: 120mV p-pCord Length: 1.8mPlug: Type of plug differs depending on the countrywhere the unit is usedOperating Temperature: 0° to +40°CFinish: Case: PC/ABS alloy, blackWeight: 300gAccessory: Power cord (2m) × 1

WB-2000-2Rechargeable Battery

Nominal Voltage: 1.2V DCCapacity: 1900mAh (rated), 2000mAh (typical)Operating Temperature: 0°C to +40°COperating Humidity: 30% to 85% RHDimensions: ø14.2 × 50.2 mmWeight: 30g (per piece)

UHF Wireless Microphone and Tuner Combination Sets5000 Series Wireless Microphone Sets 200/300 Series Wireless Microphone Sets

8584

WS-5225UHF Hand-held Wireless Microphone/Tuner SetWM-5225 + WT-5810

WS-5265UHF Hand-held Wireless Microphone/Tuner SetWM-5265 + WT-5810

WS-5325MUHF Lavaliere Wireless Microphone/Tuner SetWM-5325 + YP-M5310 + WT-5810

WS-200UHF Hand-held Wireless Microphone/Tuner Set

WS-300UHF Lavaliere Wireless Microphone/Tuner Set

WS-300HUHF Headset Wireless Microphone/Tuner Set

Power Source: AC mains (supplied AC-DC adapter must be used)Power Consumption: 100mA (12V DC) Receiving System: Double super-heterodyneAudio Output: Balanced output: +16dB*2 (max.), 600Ω, balanced, XLR-3-31 type connector /Unbalanced output: +10dB*2 (max.), 600Ω, unbalanced, phone jackAntenna: Rod antennaReceiving Sensitivity: Over 90dB, S/N ratio (20dBµV input, 40kHz deviation)Squelch Sensitivity: 18 – 40dBµV variableIndication: ANT A/B, Audio (peak), RF level, powerS/N Ratio: Over 95dB (A-weight, balanced output)

Microphone Element: Dynamic unit: CardioidRF Carrier Power: Max. 10mWOscillator: PLL synthesizerBattery: 6LR61Battery Life: Approx. 10 hours Indication: Battery status LEDFinish: Resin, coatingDimensions: ø50 × 272mmWeight: 220g

Microphone Element: Back electret condenser: Omni-directionalRF Carrier Power: Max. 10mWOscillator: PLL synthesizerMic. Input Connector: ø3.5 mini jackBattery: 6LR61Battery Life: Over 10 hours (alkaline) Indication: Battery status LEDFinish: Resin, coatingDimensions: 62 (W) × 102 (H) x 31.5 (D)mm (excluding antenna)Weight: 90g

Microphone Element: Back electret condenser: Omni-directionalRF Carrier Power: Max. 10mWOscillator: PLL synthesizerMic. Input Connector: ø3.5 mini jackBattery: 6LR61Battery Life: Approx. 10 hours Indication: Battery status LEDFinish: Resin, coatingDimensions: 62 (W) × 102 (H) x 31.5 (D)mm (excluding antenna)Weight: 90g

Harmonic Distortion: Under 1% (typical)Frequency Response: 100Hz – 15kHz, ±3dBAmbient Temperature: -10°C – +45°CFinish: Front panel: Resin, grayDimensions: 214 (W) × 35 (H) × 100.5 (D)mm (excluding antenna)Weight: 580gAccessory: AC-DC adapter

Tuner Section

*1 Frequency range dependent on individual country regulatory codes.*2 0dB = 0.775V

WS-5325UUHF Lavaliere Wireless Microphone/Tuner SetWM-5325 + YP-M5300 + WT-5810

WS-5325HUHF Headset Wireless Microphone/Tuner SetWM-5325 + WH-4000H + WT-5810

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

86

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Wireless Guide Systems

WM-2110Desk-top Transmitter

Power Source: 230V AC, 50HzPower Consumption: 3WModulation: Frequency modulationTransmitting Frequencies: 470MHz band (5ch)(470.075, 470.150, 470.375, 470.625, 470.725MHz)RF Carrier Power: 5mWOscillator: PLL synthesizerFrequency Response: 150Hz – 6kHz (Desk-top transmitter to Portable receiver)Pre-emphasis: 50µsInput Level(selectable): Standard input: -54dB*/-60dB*/-66dB* (Mic) -12dB*/-18dB*/-24dB* (Line)Maximum input: -30dB*/-36dB*/-42dB* (Mic)+12dB*/+6dB*/0dB* (Line) Mic/Line selection, 600Ω, unbalanced, phone jack Remote Input: Make contact input: Release voltage: 2V DC short-circuit current: 0.2mA loop resistance: under 100Ω Remote control mode: Transmit radio signal when at makeOperation Temperature: -10°C to +40°CFinish: ABS resin, dark grayDimensions: 140 (W) × 31 (H) × 119.5 (D)mmWeight: 270gAccessory: AC-DC adapter (1.8m) × 1, Screw driver × 1, 3-pole phone plug cord (2 m) × 1

*0 dB = 1 V

WT-2100 Portable Receiver

Power Source: 1.5 V DC (Battery)Receiving Frequencies: 470MHz band (5ch) (470.075, 470.150, 470.375, 470.625, 470.725MHz)Receiving System: Double super-heterodyneReceiving Sensitivity: Better than 25dB, S/N ratio (7dBµVEMF input, ±1.7kHz deviation)Frequency Response: 200Hz – 5kHz (Portable transmitter to Portable receiver) 150Hz – 6kHz (Desk-top transmitter to Portable receiver)De-emphasis: 50µsOutput Level: 4mW (16Ω load, 10% distortion)Battery Life: 18 hours (alkaline)Battery: LR6 (1.5 V) 1Operation Temperature: -10°C to +40°CFinish: Resin, dark silver Dimensions: 62 (W) × 163.6 (H) × 32.5 (D)mmWeight: 112g (battery included)Accessory: Neck strap × 1Option: Ear-suspension ear phone: YP-E401

* When using an earphone not made by TOA, use a one with a ø3.5mm plug and impedance of over 16Ω.

YP-E401 Ear-Suspension Earphone

Type: Dynamic typeImpedance: 16ΩFrequency Response: 300Hz –15kHzRated Sensitivity: 88dB (0dB= 2 X 10-5 Pa, 1kHz, 10mW)Input: Max. 50mWTerminal: ø3.5mm monaural plugFinish: BlackWeight: 17gAccessory: Ear-pad × 1, Suspension ring* × 2

* Three different sizes are available for the suspension ring. L: 68 × 47 mm / M: 64 × 45 mm / S: 60 × 43 mm

Power Source: 1.5V DC (Battery)Modulation: Frequency modulationTransmitting Frequencies: 470MHz band (5ch) (470.075, 470.150, 470.375, 470.625, 470.725MHz)RF Carrier Power: 2mWOscillator: PLL synthesizerFrequency Response: 200Hz – 5kHz (Portable transmitter to Portable receiver)Pre-emphasis: 50µsInput Level: -50dB* (sensitivity Hi)/-44dB* (sensitivity Low)Battery Life: 18 hours (alkaline)Battery: LR6 (1.5V) x 1Operation Temperature: -10°C to +40°CFinish: Resin, dark grayDimensions: 62 (W) × 163.6 (H) × 32.5 (D)mmWeight: 115g (battery included)Accessory: Neck strap × 1

*0 dB = 0.775 V

WM-2100 Portable Transmitter

YP-M101 Tie-clip Microphone

Type: Electret condenser typeDirectivity: UnidirectionalSensitivity: -46dB (0dB = 1V/Pa, 1kHz, load: 2kΩ)Maximum Input Level: 115dB SPLTerminal: ø3.5mm monaural plugFinish: Dark grayWeight: 20g (cable included)Accessory: Clip × 1

YP-M201 Close-Talking Microphone

Type: Electret condenser typeDirectivity: UnidirectionalSensitivity: -57dB (0dB = 1V/Pa, 1kHz, load: 2kΩ)Maximum Input Level: 115dB SPLSwitch: Press to talk switch (can be locked)Terminal: ø3.5mm stereo plugFinish: BlackWeight: 20g (cable included)

YP-M301 Headset Microphone

Type: Electret condenser typeDirectivity: UnidirectionalSensitivity: - 41dB (0dB = 1V/Pa, 1kHz, load: 2kΩ)Maximum Input Level: 117dB SPLTerminal: ø3.5mm monaural plugFinish: Headband: ABS resin, blackWeight: 45gAccessory: Storage case × 1, Windscreen × 2

87

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Infrared Wireless Microphone Systems

IR-200M Infrared Hand-held Wireless Microphone

IR-702T (CE/US version)Infrared Wireless Tuner

Power Source: AC mains 50/60Hz (supplied from the accessory AC adaptor)Power Consumption: 15W or lessReceiving Frequency: Channel A: 3.100MHz/Channel B: 3.350MHzReceiver Sensitivity: S/N ratio: 50dB or more (40dBµV input, 1 kHz modulation, ±4.8 kHz deviation) S/N Ratio: 61dB or more (60dBµV input, ±4.8 kHz deviation, A-weighted)Tone Squelch Frequency: 32.768kHzInfrared Receiver Input: 75Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24V DC, max. 220mA max. total 2 terminals)Number of Connectable Conference Receiver: 4 (YW-1022/YW-1024)/16 (IR-700D, YW-1024 × 4)Output: Channel A and B: -10 dB* (±4.8kHz devia-tion, at volume level max.), 600Ω, electronically balanced, 3 pole phone jackNote: Channel A switchable to mixer outputFrequency Response: 100Hz – 12kHzOperating Temperature: -10°C to +50°COperating Humidity: 30% to 85% RH (no condition)Finish: Case: ABS resin, blackDimensions: 210 (W) × 44 (H) × 210.9 (D)mmWeight: 630g (unit itself)Accessory: AC adaptor × 1, Power cord (2m) × 1, Cord with a phone plug (1m) × 1, Color label (6 colors) × 1, Rubber foot × 4Option: Mounting bracket kit: MB-WT3, MB-WT4 (for mounting with the optional IR-700D together)

*0db = 1V

IR-200BC(CE/US version)Battery Charger

IR-300M Infrared Hands-free Wireless Microphone

Power Source: AC mains 50/60Hz (supplied from the accessory AC adaptor*1)Current Consumption: Max. 2ACharging Time: Max. 3 hours Number of wireless microphones to be charged simultaneously: 2 pieces*2

Operating Temperature: 0°C to +40°COperating Humidity: 30% to 85% RHFinish: Case: ABS resin, metallic gray, 50% gloss, paint/Microphone receptacle section: PPE resin, blackDimensions: 238 (W) × 83 (H*2) × 98 (D)mmWeight: 635g (unit only, including mounting adapter (accessory))Accessory: AC adaptor (DC cord length; 1.8m) × 1, Power cord (2m) × 1, Mounting adapter (pre-installed on the unit) × 2

*1 Not supplied with the IR-200BC (KR). For the usable power supply cord and AC adapter, contact your nearest TOA dealer.*2 Using the mounting adapter allows one each of the IR-200M and IR-300M to be charged in combination.Note that nickel metal hydride (Ni-MH) batteries other that the dedicated battery IR-200BT cannot be charged.

Battery: IR-200BT-2 rechargeable battery for the infrared wireless microphone (option) or AA alkaline dry cell battery (2 pieces) Current Consumption: typ.250mA (2.4V, Power selector switch: N)/typ.340mA (2.4V, Power selector switch: H)Infrared Emitter: Wavelength: 870nm (AM: Brightness modulation)Modulation Method: Frequency modulationCarrier Frequency: Channel A: 3.100 MHz/Channel B: 3.350 MHzTransmission Distance: Approx. 20m (Power selec-tor switch: H; In an unobstructed space.)/Approx. 15m (Power selector switch: N; In an unob-structed space.)

Tone Signal: 32.768kHzModulation Sensitivity: ±4.8kHz (1 kHz, when SPL of 84dB is input)Maximum Input Sound Pressure: 12 dB SPLInput Sensitivity Adjustment: Adjustment range: -9dB to 0dB (factory-preset: 0dB) (IR-300M only)Microphone Unit: Unidirectional electret condenser microphoneFrequency Response: 100Hz – 12kHzPre-emphasis: 300µsInput: External microphone input (ø3.5mm monau-ral mini jack) (IR-300M only)Battery Operation Time: Approx. 8 h (when the IR-200BT-2 rechargeable battery for the infrared wireless microphone is used; Power selector switch: N)/Approx. 6 hours (when the alkaline battery is used; Power selector switch: N)Operating Temperature: 0°C to +40°COperating Humidity Limits: 30% to 85% RHFinish: Control Section: ABS resin, metallic gray, 50% gloss, paint/Filter Section: Polycarbonate, optical cut filterDimensions: IR-200M: ø37 × 241.8mm/IR-300M: 64 (W) × 91.3 (H) × 27.3 (D)mmWeight: IR-200M: 170g (with battery)IR-300M: 130g (with battery and strap)Accessory: Screw driver (for setting) × 1, Color label (6 colors) × 1

Power Source: AC mains 50/60Hz (supplied from the accessory AC adaptor)Power Consumption: 25W or lessInput/Output: 4 mixing inputs, 2 distribution outputsBand-Pass Frequency: 3.0 – 6.0MHzInfrared Receiver Input: 75 ohms, BNC jack × 4 (Infrared wireless receiver's power source: 24V DC, 800mA max. in total of 4 terminal) Distribution Output: 75 ohms, BNC jackOperating Temperature: -10°C to +50°COperating Humidity: 30% to 85% RHFinish: Case: ABS resin, blackDimensions: 210 (W) × 44 (H) × 200.9 (D)mmWeight: 640g (unit itself)Accessory: AC adaptor × 1, BNC plug-to-BNC plug cord (50cm) × 2, Rubber foot × 4

IR-700D(CE/US version)Infrared Wireless Distributor

IR-200BTNi-MH Battery

Nominal Voltage: 1.2V DCNominal Capacity: Min. 2300mAhOperating Temperature: 0°C to +40°COperating Humidity: 30% to 85% RHDimensions: ø14.2 × 50.2 mmWeight: 30g

YW-1022Distributor

Frequency Range: 1.6 – 1,000 MHz (excluding 50 – 70 MHz)Distribution Loss: 4.5 dB ±3 dB (between the Mix-ing and each Distribution terminals)Input/Output Impedance: 75 ohmsCoaxial Connector: Mixing terminal: BNC jack, power passing type (under 30 V DC, under 2 A)/Distribution 1 and 2 terminals: BNC jack, power passing type (under 30 V DC, under 1 A)Operation Temperature: -10°C to +50°CFinish: ABS resin, grayDimensions: 75 (W) × 122 (H) × 34 (D) mmWeight: 105 g

YW-1024Distributor

Frequency Range: 1.6 – 1,000 MHz (excluding 50 – 70 MHz)Distribution Loss: 8.5dB ±3dB (between the Mix-ing and each Distribution terminals)Input/Output Impedance: 75ΩCoaxial Connector: Mixing terminal: BNC jack, power passing type (under 30 V DC, under 2 A)/ Distribution 1 – 4 terminals: BNC jack, power pass-ing type (under 30 V DC, under 1 A)Operation Temperature: -10°C to +50°CFinish: ABS resin, grayDimensions: 75 (W) × 122 (H) × 34 (D) mmWeight: 120 g

YP-M101 Tie-clip Microphone

YP-M301 Headset Microphone

Optional External Microphones

88

IR-802T (CE-GB/CU version)Infrared Wireless Tuner

Power Source: AC mains 50/60Hz (supplied ACadaptor must be used)Power Consumption: 8W (based on UL standards)Max. 40.8W (rated output at IR-802SP)Receiving Frequency: Teacher (Channel A):3,100MHz/Student (Channel B): 3,350MHzReceiver Sensitivity: 50dB or more, S/N ratio(40dBμV input, 1 kHz modulation, ±4.8 kHz deviation)S/N Ratio: Tuner: 60dB or more (60dBμV input, 1kHz,±4.8 kHz deviation, A-weighted, Equalization: Centered)/AUX: 75dB or more (A-weighted, Equalization: Centered)Tone Squelch Frequency: 32.768kHzInput: AUX PC: line, -10dB*, 10kΩ, unbalanced,stereo mini jack (internal mixing)/AUX DVD/TV: line,-10dB*, 10kΩ, unbalanced, 2P RCA jack (internal mixing)/AUX MP3: line, -10dB+, 10kΩ, unbalanced, stereomini jack (internal mixing)/Mute: 25V line signalsof telephone paging from a school intercom systemOutput: ALD (Assistive Listening Device): line,-10dB*, 10kΩ, unbalanced, monaural mini jack/Speaker: RJ45 (dedicated terminal for IR-802SPconnection)Frequency Response: Tuner: 100Hz – 12kHz,AUX: 100Hz – 20kHzEqualization: High: ±10dB at 10kHz/Mid: ±10dB at 1.3kHz/Low: ±10dB at 100HzMute Function: Mute by 25V line signalsLED Indicator: Power (green) × 1,Infrared Reception (yellow) × 2, Mute (red) × 1Operating Temperature: -10°C to +50°COperating Humidity: 90% RH or less (no condition)Finish: Panel: Aluminum. black/Case: Steel plate, blackDimensions: 210 (W) × 46 (H) × 312 (D)mmWeight: 1.8kgAccessory: AC adaptor (DC cord length: 1.8m) × 1,AC power cord (2m) × 1, Volume control cover × 6,Removable terminal plug (2 pins) × 1Option: Half width blank panel: MB-15B-BK

*0dB = 1V

Power Source: 24V DC (supplied from the IR-802T)Power Consumption: 4.4W (based on UL standards)Rated Output: 20WFrequency Response: 100Hz – 20kHz (-10dB) atinstallation in 1/2 free sound field (Measured byinstalling the unit in the center of a ceiling)Amplification System: Class DDistortion: 5% or less (rated output)Speaker Component: 12cm cone-typeInfrared Wireless ReceiverWavelength: 870nmCarrier Frequency: Teacher (Channel A): 3,100MHzStudent (Channel B): 3,350MHzReception Angle: 360° (Horizontal)

Connection Terminal: RJ-45LED Indicator: Power (green) × 1UL Code: UL60065, UL2043Tone Signal: 32.768kHzMounting Hole: ø300mmUsable Cable: CAT-5 UTPOperating Temperature: 0°C to +50°COperating Humidity: 90% RH or less (no conden-sation)Finish: Enclosure: Steel plate, plating/Baffle:Fire-resistant ABS resin (resin material grade:UL94V-01), white/Punched net: Steel plate, white/Filter section: Polycarbonate optional cut filterDimensions: ø320 × 205mmWeight: 3.4kgAccessory: Safety wire × 1, Ceiling reinforcementring × 1, Trim ring × 1, Paper pattern × 1Option: Tile bar bridge: HY-TB1

*0dB = 1V

IR-510RInfrared Wireless Receiver


IR-820SPInfrared Speaker


Power Source: 24V DC (supplied from the IR-702T)Current Consumption: Max, 30mAInfrared DetectorWavelength: 870nmCarrier Frequency: Channel A: 3.100MHz/Channel B: 3.350MHz Communication Area: Approx. 15m in a space without any obstacle

Connection Terminal: 75Ω, BNC jackOperating Temperature: 0°C to +40°COperating Humidity: 30% to 85% RH (no condition)Finish: Case: Polycarbonate resin, visible light cut filterDimensions: 84.5 (W) × 63.5 (H) × 32(D)mmWeight: 100g (unit only)Accessory: Stand mounting bracket × 1, Bracket mounting screw × 2

Power Source: 24V DC (supplied from the IR-702T)Current Consumption: Max, 40mAInfrared DetectorWavelength: 870nmCarrier Frequency: Channel A: 3.100MHz/Channel B: 3.350MHz Acceptance Angle: Vertical: 80° (up to 30° mov-able downward)/Horizontal: 80° (up to 30° movable left or right) Communication Area: Approx. 15m in a space without any obstacles

Connection Terminal: 75Ω, BNC jackOperating Temperature: 0°C to +40°COperating Humidity: 30% to 80% RHFinish: Case: Polycarbonate resin, visible light cut filter/Base: ABS resin, off-whiteDimensions: 70 (W) × 120 (H) × 72(D)mmWeight: 220g (unit only)

Power Source: 24V DC (supplied from the IR-702T)Current Consumption: Max, 60mAInfrared DetectorWavelength: 870nmCarrier Frequency: Channel A: 3.100MHz/Channel B: 3.350MHz Communication Area: Approx. 7m in radius from the point underneath the unit (Ceiling height:2.5 –3.0n in a space without any obstacle

Connection Terminal: 75Ω, BNC jackOperating Temperature: 0°C to +40°COperating Humidity: 30% to 85% RH (no condition)Finish: Case: Polycarbonate resin, visible light cut filter/Base: ABS resin, blackDimensions: ø120 × 71.3 (H)mmWeight: 205g (unit only)Accessory: Mounting bracket × 1

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

8988

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Desktop Type Microphones Handheld Type MicrophonesWired Microphones

PM-660Paging Microphone

PM-660UPaging Microphone

PM-660DPaging Microphone

Type: Moving coil microphonePolar Pattern: UnidirectionalRated Impedance: 600Ω, unbalancedOutput Level: -58dB (1kHz, 0dB=1V/pa)Frequency Range: 100Hz – 10kHzOutput: ø4.5, 2-condactor shielded cable (2.5m) with stereo phone plugSwitch: 1-push-to-talk switch, 1-locking lever, short-off typeRemote Control: 500mA or less at 30V DCFinish: Microphone head; Zinc plated steel wire, baked paint, gray/Main unit; ABS resin, grayDimensions: 100 (W) × 215 (H) × 150 (D) mmWeight: 440g (cord excluded)

* Do not keep the lock lever placed in the locked state (ON position) for a long period of time. Doing so may cause poor conductivity in the lever switch due to deterioration with age, resulting in unit malfunction.

Type: Moving coil microphonePolar Pattern: UnidirectionalRated Impedance: 600Ω, balancedOutput Level: -58dB (1kHz, 0dB=1V/pa)Frequency Range: 100Hz – 10kHzOutput: ø5.0, 4-conductor (2-core shielded) cable (2.5m) with 5-pin DIN plugSwitch: 1-push-to-talk switch, 1-locking lever, short-off typeRemote Control: 500mA or less at 30V DCFinish: Microphone head; Zinc plated steel wire, baked paint, gray/Main unit; ABS resin, grayDimensions: 100 (W) × 215 (H) × 150 (D) mmWeight: 440g (cord excluded)


Type: Moving coil microphonePolar Pattern: UnidirectionalRated Impedance: 600Ω, balancedOutput Level: -58dB (1kHz, 0dB=1V/pa)Frequency Range: 100Hz – 10kHzOutput: ø5.0, 4-conductor (2-core shielded) cable (2.5m) without plugSwitch: 1-push-to-talk switch, 1-locking lever, short-off typeRemote Control: 500mA or less at 30V DCFinish: Microphone head; Zinc plated steel wire, baked paint, gray/Main unit; ABS resin, grayDimensions: 100 (W) × 215 (H) × 150 (D) mmWeight: 440g (cord excluded)


EC-100MChime Microphone

Power Source: 3V DC (R14P × 2 pcs)Current Consumption: 2mA during chime and microphone operation10µA at no operationChime Tones: 4-tone chime/ (up/down)Microphone: Unidirectional dynamic type Microphone Frequency Response: 200Hz – 10kHzOutput: Chime Signal; -45dB*, 600Ω unbalanced (chime volume control set to maximum position)/Microphone; -53dB, 600Ω unbalanced (1kHz, 0dB=1V/Pa)Finish: Case: Zinc die casting, metallic goldWeight: 770gDimensions: 112 (W) × 293 (H) × 150 (D) mm Accessory: Connecting cord (2m) × 1, Slotted-head screwdriver × 1, Windscreen × 1

*0dB=1VNote: Prepare 2 batteries (no supplied with the unit).

DM-1300Unidirectional Microphone


PM-120Unidirectional Paging Microphone


Type: Moving coil microphoneDirectivity: UnidirectionalRated Impedance: 600Ω, balancedRated Sensitivity (1kHz 0dB=1V/Pa): -54dBFrequency Response: 70Hz – 15kHzConnection Cable: 1-core shielded cable, unbalancedCable Length: 10mTerminal of Cable: Phone plugTalk Switch: Short-off, slide switchFinish: Body; Die-cast, zinc, metallic gray, paint/Head; Steel/zinc-plated steel wire, metallic gray, paintDimensions: ø51 × 170mmWeight: 245g (without connection cable) Accessory: Microphone holder (U5/16) × 1

Type: Moving coil microphoneDirectivity: UnidirectionalRated Impedance: 600Ω, unbalancedRated Sensitivity (1kHz 0dB=1V/Pa): -52dBFrequency Response: 50Hz – 12kHzConnection Cable: 1-core shielded cable, unbalancedCable Length: 10mTerminal of Cable: Phone plugTalk Switch: Short-off,slide switchFinish: Body; Zinc-diecast, Metallic gray/Head; Diecast aluminum, zinc plated steel wire, Metallic grayDimensions: ø39.5 × 163mm (microphone body)Weight: 298g (without connection cable)Accessory: Microphone holder (U5/16, NS5/8, W3/8) × 1

Type: Moving coil microphoneDirectivity: UnidirectionalRated Impedance: 600Ω, unbalancedRated Sensitivity (1kHz 0dB=1V/Pa): -55dBFrequency Response: 100Hz – 12kHzConnection Cable: 1-core shielded cableCable Length: 7.5mTerminal of Cable: Phone plugTalk Switch: Short-off,slide switchFinish: Body; Aluminum-diecast, Black/Head; ABS resin, Black/Zinc plated steel wire, BlackDimensions: ø55 × 178mmWeight: 155g (without connecting cable)Accessory: Microphone holder (U5/16, NS5/8) × 1


Type: Moving coil microphoneDirectivity: UnidirectionalFrequency Range: 50Hz – 12kHz (close-talking characteristic)Rated Sensitivity: -56dB (1kHz, 0dB = 1V/Pa)Rated Impedance: 250Ω, unbalancedCables: Coiled cable ø6 × 2.5m (at a max. extended length) Talk Switch: Push-to-talk switchFinish: Front: ABS resin, matte, champagne gold/Rear: ABS resin, matte, blackWeight: 230gOption: Microphone hanger: 2202

Note: The microphone can be modified to the balanced type by changing a plug.

Type: Moving coil microphone Directivity: UnidirectionalRated Impedance: 600Ω, balancedRated Sensitivity (1kHz 0dB=1V/Pa): -56dBFrequency Response: 70Hz – 15kHzConnection Cable: 2-core shielded cable, unbalancedCable Length: 10mTerminal of Cable: Phone plugTalk Switch: Short-off, slide switchFinish: Body; Die-cast, zinc (metallic gold)/Head; Brass/zinc plated steel wire, metallic goldDimensions: ø40.5 × 6.81mmWeight: 280g (without connection cable)Accessory: Microphone holder (U5/16) × 1

(For Lecture, Speech Use)

(For Speech Use)

(For Speech, Vocal Use)

(For Vocal Use)

(For Paging Use)

PM-222Unidirectional Paging Microphone

Type: Moving coil microphoneDirectivity: UnidirectionalRated Impedance: 600Ω, unbalancedRated Sensitivity: -47dB (1kHz 0dB=1V/Pa)Frequency Response: 100Hz – 10kHzCable: 1-core shielded cableCable Length: 2m (when extended)Terminal: Phone plugTalk Switch: Short-off type with lockFinish: ABS resin, GrayDimensions: 44 (W) × 160 (H) × 38 (D)mm Weight: 200gAccessory: Microphone holder × 1, Metal fitting × 1, Tapping screw (4×16) × 2

(For Paging Use)

90


Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Other Microphones

Desk Stands

Goosenecks

Type: Moving coil microphonePolar Pattern: Cardioid patternRated Impedance: 600Ω, balancedRated Sensitivity: -56dB (1kHz, 0dB=1V/Pa)Frequency Range: 100Hz – 10kHzSwitch: Side/short-off typeOutput Connector: ø21 3-pin plug (BTS 21P3B)Finish: Microphone body: Gold, sparkling paintGooseneck shaft: Nickel-pear skin-platingWeight: 475gUsable Stand: ST-73A (option) or ø21 3-pin socketAccessory: ø21 3-pin receptacle (BTS21R3A) × 1,M3 × 10 screw × 3, W3 washer × 3, SW3 spring washer × 3, M3 nut × 3

DM-524SFixed Lo-Z Gooseneck Microphone with Switch

Type: Moving coil microphonePolar Pattern: Cardioid patternRated Impedance: 600Ω, balancedRated Sensitivity: -56dB (1kHz, 0dB=1V/Pa)Output Connector: ø21 3-pin plug (BTS 21P3B)Frequency Range: 100Hz – 10kHzFinish: Microphone body: Gold, sparkling paintGooseneck shaft: Nickel-pear skin-platingWeight: 465gUsable Stand: ST-73A (option) or ø21 3-pin socketAccessory: ø21 3-pin receptacle (BTS21R3A) × 1,M3 × 10 screw × 3, W3 washer × 3, SW3 spring washer × 3, M3 nut × 3

EM-410Lavalier Microphone

DM-524BFixed Lo-Z Gooseneck Microphone

ST-800For EM-800Input Connector: XLR-3-31 equivalentOutput Connector: XLR-3-32 equivalentFinish: Die-cast zinc, black, mat finish, paintDimensions: 115 (W) × 40 (H) × 124 (D)mm Weight: 715g

Type: Electret condenserPolar Pattern: HypercardioidRated Impedance: 120Ω, balancedRated Sensitivity: -47dB (1kHz 0dB = 1V/Pa)Phantom Power: 9 – 52V DCFrequency Response: 100Hz – 15kHzOutput Connector: Balanced-phone plugCable Length: 5.0mOperating Temperature: 0°C to +40°CFinish: Body: Copper alloy, black, semi-gloss, paintDimensions: ø8.9 × 28.6mm (cord excluded)Weight:100gAccessory: Windscreen × 1, Clip Holder × 1

EM-800Gooseneck Microphone

EM-700Boundary Microphone

EM-600Flush-Mount Boundary Microphone

Type: Electret condenserPolar Pattern: CardioidRated Impedance: 120Ω, balancedRated Sensitivity: -35dB (1kHz 0dB = 1V/Pa)Phantom Power: 9 – 52V DCFrequency Response: 60Hz – 20kHzOutput Connector: XLR-3-12 equivalentOperating Temperature: 0°C to +40°CFinish: Body, Shaft: Copper alloy, black, semi-gloss, paintDimensions: ø12 × 420mmWeight:135gAccessory: Windscreen × 1Applicable Stand: Microphone Stand: ST-800 (option)

Type: Electret condenserPolar Pattern: CardioidRated Impedance: 120Ω, balancedRated Sensitivity: -33dB (1k Hz 0 dB = 1 V/Pa)Phantom Power: 9 – 52V DCFrequency Response: 35Hz – 20kHzLow Cut: 100Hz, -12 dB/octOutput Connector: XLR-3-12 equivalentCable Length: 7.5mOperating Temperature: 0°C to +40°CFinish: Body: Die-cast aluminum, black, mat finish, paint/Punched net: Surface-treated steel plate, black, mat finish, paintDimensions: 83 (W) × 23 (H) × 83 (D)mm (cord excluded)Weight: 290g

Type: Electret condenser Polar Pattern: OmnidirectionalRated Impedance: 120Ω, balancedRated Sensitivity: -36dB (1kHz 0 dB = 1V/Pa)Phantom Power: 9 – 52 V DCFrequency Response: 30Hz – 20kHzOutput Connector: XLR-3-12 equivalentOperating Temperature: 0°C to +40°CFinish: Body: Steel, white, semi-gloss, paint/Head: Zinc-plated steel wire, white, semi-gloss, paintDimensions: ø28 × 68mmWeight: 85gAccessory: Rubber Isolation Ring × 2, M20 Nut × 1

(With microphone stand: ST-800)

ST-73AFor DM-524B/524S•OutputReceptacle:EquivalenttoXLR-3-14•InputReceptacle:BTS21R3BDimensions: ø165 × 58.5 (H)mm Weight: 2.3kg

ST-65A•Height:120–175mm•U5/16thread(threadadapter), NS5/8 thread (inner pipe)•Cliptypemicrophoneholder(U5/16thread)Weight: 1kg (without accessory)

ST-66A•Height:225–340mm•U5/16thread(threadadapter), NS5/8 thread (inner pipe)•Cliptypemicrophoneholder(U5/16thread)Weight: 1.1kg (without accessory)

ST-506•Length:15cm.•U5/16thread(male,female).

ST-507•Length:30cm.•U5/16thread(male,female).

YM-121•Length:36.7cm.•FlexibleshaftforST-73.•InputReceptable:EquivalenttoXLR-3-11C.•OutputReceptacle:BTS21P3B(3-pin).

RU-2002Amplifier Control Unit for PM-660D with Signal

RU-2001Amplifier Control Unit for PM-660D

Power Source: 12 – 24V DC or 12V AC adaptorCurrent Consumption: 60mAMic Input: -62dBV, 600Ω, unbalanced, 5-pin DIN socketOutput: 0dBV, 600Ω, balanced, screw terminalApplicable Microphone: PM-660DFinish: Color: BlackDimensions: 124 (W) × 42.5 (H) × 159 (D) mmWeight: 700gAccessory: Mounting bracket × 1

Power Source: 12 – 24V DC or 12V AC adaptorCurrent Consumption: 60mAMic Input: -62dBV, 600Ω, unbalanced 5-pin DIN socketOutput: 0dBV, 600Ω, balanced, screw terminalChime: 4-tone, 2-tone, single-tone chime and gong Applicable Microphone: PM-660DFinish: Color: BlackDimensions: 124 (W) × 42.5 (H) × 159 (D) mmWeight: 700gAccessory: Mounting bracket × 1

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

91

Floor Microphone Stands Microphone Connectors

Plate

Wall Mounting Box

ST-321BFloor Microphone Stand with Boom

ST-303AFloor Microphone Stand

ST-304AFloor Microphone Stand

ST-322BFloor Microphone Stand

YM-1JDouble Pole Jack

Connector: XLM-3-32PCH-RCurrent Capacity: 3A (AC)Usable Cable: Microphone vinyl cable with sectional areas of 0.75 – 2.0mm2

Usable Plate: YP-1AFUsable Plug: XLR-3-11CFinish: Cover; ABS resin (off-white)/Frame; Steel plates (t=1.2)Dimensions: 45 (W) × 110 (H) × 52 (D) mmWeight: 95gAccessory: Screw (M4 × 35) × 2

Connector: XLM-3-31PCH-RCurrent Capacity: 3A (AC)Usable Cable: Microphone vinyl cable with sectional areas of 0.75 – 2.0mm2

Usable Plate: YP-1AFUsable Plug: XLR-3-12CFinish: Cover; ABS resin (off-white)/Frame; Steel plates (t=1.2)Dimensions: 45 (W) × 110 (H) × 53 (D) mmWeight: 95gAccessory: Screw (M4 × 35) × 2

Jack: Double pole jackUsable Cable: Microphone vinyl cable with sectional areas of 0.75 – 2.0mm2 Usable Plate: YP-1AFUsable Plug: Single or double pole plugFinish: Cover; ABS resin (off-white)/Frame; Steel plates (11.2) Dimensions: 45 (W) × 110 (H) × 48.1 (D) mmWeight: 75gAccessory: Screw (M4 × 35) × 2

YM-3CFXLM-3-31PCH-R Connector.

YM-3CMXLM-3-32PCH-R Connector.

Finish: Aluminum hairline Dimensions: 70 (W) × 120 (H) × 6 (D) mmWeight: 25g

YP-1AFCover Plate

•CoverplateforYM-1J,YM-3CFand YM-3CM.

Finish: High-impact sterol resin, Milky whiteDimensions: 70 (W) × 120 (H) × 40 (D) mmWeight: 60g

YS-11AWall Mounting Box

Enlarged Extensible Length: 1045 –1706mmBoom Enlarged Extensible Length: 53 – 660mmMounting Screw: NS5/8 (pipe thread), U5/16 (adapter)Finish: Steel pipe for general use, black, mat finish, paint Weight: 2.9kgAccessory: Thread adapter × 1

Enlarged Extensible Length: 971 –1627mmMounting Screw: NS5/8 (pipe thread), U5/16 (adapter)Finish: Steel pipe for general use, black, mat finish, paint Weight: 2.2kgAccessory: Thread adapter × 1

Enlarged Extensible Length: 940 –1600mmMounting Screw: NS5/8 (pipe thread), U5/16 (adapter)Finish: Steel pipe for general use, chrome platingWeight: 1.7kgAccessory: Thread adapter × 1

Enlarged Extensible Length: 865 –1530mmMounting Screw: NS5/8 (pipe thread), U5/16 (adapter)Finish: Outer pipe: Steel pipe for general use, semi-gloss, paintInner pipe: Steel pipe for general use, chrome platingBase: Iron casting, black, semi-gloss, paintWeight: 3.6kgAccessory: Thread adapter × 1

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

92

Hand Grip Type MegaphonesWaterproof Hand Grip Type MegaphonesHand Grip Type Megaphones

ER-1206 (10W max.)Hand Grip Type Megaphone

Power Source: R6P (AA) × 6 (9V DC) or R6P (AA) × 4 with battery spacer (6V DC)Output Power: Rated 6W, max. 10WBattery Life: When using six R6P batteries (JEITA)*: Voice; Approx. 8hrs., Siren; Approx. 20 minutes/When using four R6P batteries (JEITA)*: Voice; Approx. 5hrs., Siren; Approx. 10 minutesAudible Range: Voice: Approx. 250m (JEITA)*, Siren: Approx. 315m (JEITA)*Signal Sound: Siren (sounds of 5 seconds intervals)Frequency Response: 450Hz – 6kHz (SPL -20dB)Magnetic Circuit: Neodymium Magnet, inner magnet typeDiaphragm: Polyimide film (voice coil, bobbin)Anti-bacterial Treatment: Mouth and handleWater Protection: IPX5Operating Temperature: -10°C to +40°CFinish: Horn; ASA resin, clear red/Other; ASA resin, red/Strap; Nylon, blackDimensions: 154 (W) × 266 (H) × 250 (D)mmWeight: 680g (without batteries)Accessory: Battery spacer × 1Option: Wall mounting bracket for megaphone: SP-1100

Power Source: R6P (AA) × 4 (6V DC)Output Power: Rated 3W, max. 4WBattery Life: Approx. 8hrs. (JEITA)*Audible Range: Approx. 125m (JEITA)*Frequency Response: 500Hz – 6kHz (SPL -20dB)Magnetic Circuit: Neodymium Magnet, inner magnet typeDiaphragm: Polyimide film (voice coil, bobbin)Anti-bacterial Treatment: Mouth and handleWater Protection: IPX5Operating Temperature: -10°C to +40°CFinish: Horn; ASA resin, clear dark gray/Other; ASA resin, dark gray/Strap; Nylon, blackDimensions: 137 (W) × 257.8 (H) × 210 (D)mmWeight: 610g (without batteries)Option: Wall mounting bracket for megaphone: SP-1100

ER-1203 (4W max.)Hand Grip Type Megaphones

Power Source: R6P (AA) × 6 (9V DC) or R6P (AA) × 4 with battery spacer (6V DC)Output Power: Rated 6W, max. 10WBattery Life: When using six R6P batteries (JEITA)*: Voice: Approx. 8hrs., Whistle; Approx. 20 minutes/When using four R6P batteries (JEITA)*: Voice: Approx. 5hrs., Whistle; Approx. 10 minutesAudible Range: Voice: Approx. 250m (JEITA)*, Whistle: Approx. 315m (JEITA)*Signal Sound: WhistleFrequency Response: 450Hz – 6kHz (SPL -20dB)Magnetic Circuit: Neodymium Magnet, inner magnet typeDiaphragm: Polyimide film (voice coil, bobbin)Anti-bacterial Treatment: Mouth and handleWater Protection: IPX5Operating Temperature: -10°C to +40°CFinish: Horn; ASA resin, clear dark gray/Other; ASA resin, yellow/Strap; Nylon, blackDimensions: 154 (W) × 266 (H) × 250 (D)mmWeight: 680g (without batteries)Accessory: Battery spacer × 1Option: Wall mounting bracket for megaphone: SP-1100

Power Source: R6P (AA) × 6 (9V DC) or R6P (AA) × 4 (6V DC)Output Power: Rated 6W, max. 10WBattery Life: When using six R6P batteries: Approx. 8hrs. (JEITA)*/When using four R6P batteries: Approx. 5hrs. (JEITA)*Audible Range: Approx. 250m (JEITA)*Frequency Response: 450Hz – 6kHz (SPL -20dB)Magnetic Circuit: Neodymium Magnet, inner magnet typeDiaphragm: Polyimide film (voice coil, bobbin) Anti-bacterial Treatment: Mouth and handleWater Protection: IPX5Operating Temperature: -10°C to +40°CFinish: Horn; ASA resin, clear dark gray/Other; ASA resin, dark gray/Strap; Nylon, blackDimensions: 154 (W) × 266 (H) × 250 (D)mmWeight: 660g (without batteries)Accessory: Battery spacer × 1Option: Wall mounting bracket for megaphone: SP-1100

ER-1206W(10W max.)Hand Grip Type Megaphone with Whistle

ER-1206S (10W max.)Hand Grip Type Megaphone with Siren

Power Source: R6P (AA) × 8 (12V DC)Output Power: Rated 6W, max. 10WBattery Life: Voice: Approx. 10hrs. (JEITA)*, Siren; Approx. 40 minutes (JEITA)*Audible Range: Voice: Approx. 250m (JEITA)*, Siren: Approx. 315m (JEITA)*Signal Sound: SirenDiaphragm: Polyimide filmAnti-bacterial Treatment: Mouth and handleOperating Temperature: -10°C to +40°CFinish: Horn, mouth and handle; ABS resin, red/Handle, mouth and others; ABS resin, gray/Strap; Tetoron, blackDimensions: 160 (W) × 256 (H) × 260 (D)mmWeight: 650g (without batteries)

Power Source: R6P (AA) × 8 (12V DC)Output Power: Rated 6W, max. 10WBattery Life: Voice: Approx. 10hrs. (JEITA)*, Whistle; Approx. 30 minutes (JEITA)*Audible Range: Voice: Approx. 250m (JEITA)*, Whistle: Approx. 315m (JEITA)*Signal Sound: WhistleDiaphragm: Polyimide filmAnti-bacterial Treatment: Mouth and handleOperating Temperature: -10°C to +40°CFinish: Horn; ABS resin, light gray/Handle, mouth and others; ABS resin, gray/Strap; Tetoron, blackDimensions: 160 (W) × 256 (H) × 260 (D)mmWeight: 650g (without batteries)

Power Source: R6P (AA) × 8 (12V DC)Output Power: Rated 6W, max. 10WBattery Life: Approx. 10hrs. (JEITA)*Audible Range: Approx. 250m (JEITA)*Diaphragm: Polyimide filmAnti-bacterial Treatment: Mouth and handleOperating Temperature: -10°C to +40°CFinish: Horn; ABS resin, light gray/Handle, mouth and others; ABS resin, gray/Strap; Tetoron, blackDimensions: 160 (W) × 256 (H) × 260 (D)mmWeight: 620g (without batteries)

ER-520(10W max.)Hand Grip Type Megaphone

ER-520S(10W max.)Hand Grip Type Megaphone with Siren

ER-520W (10W max.)Hand Grip Type Megaphone with Whistle


Power Source: R14P (C) × 6 (9V DC)Output Power: Rated 15W, max. 23WBattery Life: Voice: Approx. 14hrs. (JEITA)*, Siren; Approx. 20 minutes (JEITA)* Audible Range: Voice: Approx. 315m (JEITA)*, Siren: Approx. 500m (JEITA)*Signal Sound: Siren (sound at 5 seconds intervals)Diaphragm: Polyimide film (voice coil, bobbin)Anti-bacterial Treatment: Mouth and handleOperating Temperature: -10°C to +40°CFinish: Horn, mouth, battery case and handle; ABS resin, red//Strap; Nylon, blackDimensions: 210 (W) × 291 (H) × 346 (D)mmWeight: 1.2kg (without batteries)

Power Source: R14P (C) × 6 (9V DC)Output Power: Rated 15W, max. 23WBattery Life: Approx. 14hrs. (JEITA)*Audible Range: Approx. 315m (JEITA)*Diaphragm: Polyimid film (voice coil, bobbin)Anti-bacterial Treatment: Mouth and handleOperating Temperature: -10°C to +40°CFinish: Horn; ABS rein, light gray/Other; ABS rein, gray/Strap; Nylon, blackDimensions: 210 (W) × 291 (H) × 346 (D)mmWeight: 1.1kg (without batteries)

ER-1215S (23W max.)Hand Grip Type Megaphone with Siren

Megaphones

*JEITA: Japan Electronics and Information Technology Industries Association. (EIAJ TT-4501A)

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

93

SP-1100Wall Hanging Bracketfor ER-1203, ER-1206, ER-1206S and ER-1206W.


Power Source: R14P (C) × 6 (9V DC)Output Power: Rated 15W, max. 23WBattery Life: Approx. 9hrs. (JEITA)*Audible Range: Approx. 400m (JEITA)*

Diaphragm: Polyimide film (voice coil, bobbin)Anti-bacterial Treatment: Mouth and handle Operating Temperature: -10°C to +40°CFinish: Horn; ABS resin, light gray/Microphone and other; ABS resin, gray/Strap; Nylon, blackDimensions: 210 (W) × 291 (H) × 381 (D)mm (when attaching the microphone)Weight: Body: 1.15kg (without microphone and batteries)/Microphone: 150g

Finish: Stay: Stainless steelHolder and Dustproof cover: ABS resin, clear dark Weight: 410gAccessory: Wall mounting screw × 2

Shoulder Type Megaphones and Accessories

Power Req.: R14P (C) × 6 (9V DC)Output Power: Rated 15W, max. 23WBattery Life: Voice: Approx. 9hrs. (JEITA)*, Whistle; Approx. 20 minutes (JEITA)*Audible Range: Voice: Approx. 400m (JEITA)*, Whistle: Approx. 500m (JEITA)*Signal Sound: Whistle (1.6 to 2.4kHz)Diaphragm: Polyimide film (voice coil, bobbin)Anti-bacterial Treatment: MicrophoneOperating Temperature: -10°C to +40°CFinish: Horn; ABS resin, light gray/Microphone and other; ABS resin, gray/Strap; Nylon, blackDimensions: ø210 × 336mmWeight: Body: 1.2kg (without microphone and batteries)/Microphone: 150gOption: Speaker stand: ST-16A

Power Source: R14P (C) × 6 (9V DC)Output Power: Rated 15W, max. 23WBattery Life: Approx. 9hrs. (JEITA)*Audible Range: Approx. 400m (JEITA)*Diaphragm: Polyimide film (voice coil, bobbin)Anti-bacterial Treatment: MicrophoneOperating Temperature: -10°C to +40°CFinish: Horn; ABS resin, light gray/Microphone and other; ABS resin, gray/Strap; Nylon, blackDimensions: ø210 × 336mmWeight: Body: 1.1kg (without microphone and batteries)/Microphone: 150gOption: Speaker stand: ST-16A

ER-2215 (23W max.)Shoulder Type Megaphone

ER-2215W (23W max.)Shoulder Type Megaphonewith Whistle


Power Source: Battery: R20P (D) × 10 (15V DC)/ External Power: 12V DC BatteryOutput Power: Rated 30W, max. 45WSignal Sound: Whistle (1.6 to 2.4kHz) Battery Life: Voice: Approx. 17hrs. (JEITA)*, Whistle; Approx. 90 minutes (JEITA)*Audible Range: Voice: Approx. 800m (JEITA)*, Whistle: Approx. 1000m (JEITA)*AUX Input Sensitivity: -10dB*1 (300mV), 10kΩ (ø3.5 mini jack, stereo plug acceptable), volume control EXT Mic Input: 600Ω, unbalanced, ø6.3 volume controlDiaphragm: Polyimide film (voice coil, bobbin) Anti-bacterial Treatment: MicrophoneRemaining Battery Indication: LED (also serves as power indicator)/Steady ON: Normal use, Flashing: Batteries need replacementOperating Temperature: -10°C to +40°CFinish: Horn ring; Vinyl chloride, gray/Horn; Aluminum, light gray, paint/Case top; Die-cast aluminum, gray, paint/Strap; Nylon, black/Others; ABS resin, grayDimensions: ø351 × 512mmWeight: Body: 3.6kg (without microphone and batteries)/Microphone: 150gAccessory: ø3.5 mini plug (AUX input) × 1/External power supply cord (1m) × 1/Splash-proof cover ×1*2 Option: Speaker stand: ST-16A/Microphone: DM series


Power Source: Battery: R20P (D) × 10 (15V DC)/External Power: 12V DC BatteryOutput Power: Rated 30W, max. 45WSignal Sound: Whistle (1.6 to 2.4kHz) Battery Life: Voice: Approx. 17hrs. (JEITA)*, Whistle; Approx. 90 minutes (JEITA)*Audible Range: Voice: Approx. 800m (JEITA)*, Whistle: Approx. 1000m (JEITA)*AUX Input Sensitivity: -10dB*1 (300mV), 10kΩ (ø3.5 mini jack, stereo plug acceptable), volume controlEXT Mic Input: 600Ω, unbalanced, ø6.3 phone jack, volume controlReceiving Frequency: UHF (800MHz Band)/ VHF (200MHz Band)Antenna: Fold-down flexible antennaDiaphragm: Polyimid film (voice coil, bobbin)Anti-bacterial Treatment: MicrophoneRemaining Battery Indication: LED (also serves as power indicator)/Steady ON: Normal use, Flashing: Batteries need replacement Operating Temperature: -10°C to +40°CFinish: Horn ring; Vinyl chloride, gray/Horn; Aluminum, light gray, paint/Case top; Die-cast aluminum, gray, paint/Strap; Nylon, black/Others; ABS resin, grayDimensions: ø351 × 512mmWeight: Body: 3.8kg (without microphone and batteries)/Microphone: 150gAccessory: ø3.5 mini plug (AUX input) × 1/External power supply cord (1m) × 1/Splash-proof cover ×1*2 Option: Speaker stand: ST-16A/Microphone: DM series/Wireless Microphone: WM-3220 series, WM-3310 series, WM-4200 series, WM-4300 series/Wireless tuner: WTU-3800 series, WTU-4800 series

Note: Batteries are optional.

* JEITA: Japan electronics and information technology industries association (EIAJ TT-4501A)

*1 0dB = 1V

*2 Do not the unit in heavy rains or strong winds, or in locations where the unit is directly exposed to water even using with the supplied splash-proof cover.

ST-16AOptional Speaker Stand

Optional Wireless Tuner Unitfor ER-2930W.

WTU-4800: UHF

Enlarged Extensible Length: 1130 – 1660mmLoad Capacity: 7kg (static load)Finish: Stand: Aluminum, silver, mat finishSpeaker mounting bracket: Polyimide resin, blackWeight: 1.7kg (bracket included)Accessory: Speaker mounting screw (M5 × 20) × 2, Hexagon headed bolt (M8 × 20) × 1, Washer × 1, Spacer × 1, Butterfly nut × 1

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

94

Voic

eEv

acua

tion

Syst

ems

Rack

Mou

ntEq

uipm

ent

Ampl

i�er

sM

ixer

sCo

nfer

ence

Syst

ems

Wire

less

Mic

roph

ones

Wire

dM

icro

phon

esNe

twor

k-Re

late

dSy

stem

sIP

Inte

rcom

Syst

ems

Digi

tal P

ower

Ampl

i�er

sM

egap

hone

sPr

o-so

und

Spea

kers

Com

mer

cial

Soun

dSp

eake

rs

Sign

alPr

oces

sing

Equi

pmen

t

Hands-Free Type MegaphonesPower Source: R6P battery x 8 (12 V DC)12V DC / 0.8A or more (AC adapter or DC power supply unit usable.)Output Power : Rated 6W, max. 10WBattery Life : Voice: Approx. 10 hrs/ (R6P manganese dioxide battery use) Whistle: Approx. 30 minutes (continuous use)Audible Range: Voice: 160m (under noise level of 55dB) Whistle: 160m (under noise level of 55dB)Microphone: Close-talking type/press-to-talk switch, volume control/Fixed to the microphone hanger on the unit's top panelSignal: Whistle, push switch activationInput: MIC 1: -40dB, 1.5kΩ, ø6.3 mm (1/4") phone jack/MIC 2: -18dB, 3kΩ, ø3.5 mm mini jack, phantom powering/AUX (auxiliary): -12dB, 18kΩ, ø3.5 mm mini jack/ External power supply: 12V DCNote: MIC 1, 2, and AUX inputs can be used at the same time. However, their individual volume cannot be adjusted as the unit's volume control is common to those inputs.Other Functions: Voice switch (functions to activate the unit with external input signals, and to make the unit in stand-by status with no external signal.) Battery checkFinish : Body, microphone: ABS resin, off-white Shoulder pad, belt: BlackWeight: 1.6 kg (without batteries)Dimensions: 102 (W) × 258 (H) × 216 (D) mm (excluding shoulder belt)Accessory : ø3.5 mini plug × 1, External power supply cord (1m) × 1Option: Headset microphone: WH-4000A, WH-4000H Dynamic microphone: DM series Speaker stand: ST-16

ER-604W (10W max.)Compact Power Megaphone

Power Source: Alkaline battery (R6P); x 6 (9V DC) or x 4 (6V DC)Rechargeable nickel metal hydride (NiMH) battery (HR15/51); x 6 (7.2V DC) or x 4 (4.8V DC)Black manganese battery (R6PU); x 6 (9V DC) or x 4 (6V DC)Output: Rated 6W, max. 10W when 6 AA batteries (9V DC) are usedRated 3W, max. 4W when 4 AA batteries (6V DC) are usedBattery Life : Voice operation: Approx. 8 hrs (when alkaline batteries are used)AUX stereo input operation: Approx. 4.5 hrs (when alkaline batteries are used)Audible Range: Voice operation: Approx. 80m (when 6 alkaline batteries or NiMH batteries are used) Frequency Range: 300Hz – 13kHz (deviation+ -26dB)Headphone Microphone: Ear-on type, electret condenser microphone sensitivity: -47dB (0dB = 1V/1pa. 2kHz)Input: MIC: -30dB*, 3kΩ, ø3.5mm stereo mini-jack (supporting monaural applications)AUX: -10dB, 2kΩ, ø3.5mm stereo mini-jack (supporting monaural applications)Maximum Belt Length: 55 – 120cm , 90 – 160cm (when wearing an accessory extension belt)Finish: Front: ABS resin, light grayish purpleRear case: ABS resin, dark grayish purpleGrille: Surface-treated steel plate dark grayrish purple, paintWaist belt: Elastic rubber, blackDimensions: 133 (W) × 96 (H) × 222 (D) mm (belt excluded)Weight: Main PA unit (belt included, batteries excluded): 480gHeadset microphone: 50gExtension belt: 40gAccessories: Headset microphone (with head band and wind screen) x 1, Belt (attached to the main PA unit) x 1, Extension belt x 1, Battery spacer x 2

* 0dB = 1V

ER-1000 (10W max.)Personal PA System

95

Speakers

F-1000B/F-1000BTF-1300B/F-1300BT

F-1000WTWP/F-1300WTWP


InstallationCon�gurations

ClusterBracket

CeilingMountingBracket

BoardHangerBracket

PoleMountingBracket

SpeakerStand

F-1000W/F-1000WTF-1300W/F-1300WT

F-1000BTWP/F-1300BTWP

HY-CL10B

HY-CM10B HY-CM10W

HY-BH10B

YS-60B

Speakers

F-2000B/F-2000BT F-2000WTWP



ClusterBracket

CeilingMountingBracket

PoleMountingBracket

F-2000W/F-2000WT F-2000BTWP

HY-CL20B

HY-CM20B HY-CM20W

SP-131 YS-60B

Speaker Mounting Accessories Set-Up Chart

ST-16A

SpeakerStand

ST-16A

96

Speakers

SR-A12L/SR-A12S/SR-A18B SR-A12LWP/SR-A12SWP

Line Array Speakers Type A


RiggingFrame

TiltJointPlate

SR-RF12

SR-TP12

SR-RF12WP

Speakers

SR-S4L SR-S4SWP

Line Array Speakers Type S


ExtensionPlate

WallTiltBracket

WallMountingBracket

StandAdapter

FlyingBracket

FloorStand

ProtectionPad

SR-S4LWP SR-S4S

SR-EP4

SR-TB4 SR-TB4WP SR-TB4WPSR-TB4

SR-WB4 SR-WB4WP

SR-SA4

SR-FB4 SR-FB4

SR-FS4

SR-PP4

SR-EP4SR-EP4WP SR-EP4WP

Speakers

SR-H2L SR-H3S

Line Array Speakers Type H


ExtensionPlate

WallMountBracket

WallTiltBracket

FlyingBracket

StandAdapter

SR-H2S SR-H3L

SR-EP3

SR-WB3

SR-TB3

SR-FB3

SR-SA3

Indoor Use Outdoor Use

Speakers

SR-C8L/SR-C8S/SR-C15B SR-C8LWP/SR-C8SLWP/SR-C15BWP

Line Array Speakers Type C


RiggingFrame

Cluster Bracket

Rigging Support Bracket

TiltJointPlate

SR-RF8

SR-CL8

SR-SB8

SR-TP8

SR-RF8WP


SR-EP3

Speakers

SR-T5

Line Array Speaker Type T


WallPanBracket

SR-PB5

97

Speakers

SR-A12L/SR-A12S/SR-A18B SR-A12LWP/SR-A12SWP

Line Array Speakers Type A


RiggingFrame

TiltJointPlate

SR-RF12

SR-TP12

SR-RF12WP

Speakers

SR-S4L SR-S4SWP

Line Array Speakers Type S


ExtensionPlate

WallTiltBracket

WallMountingBracket

StandAdapter

FlyingBracket

FloorStand

ProtectionPad

SR-S4LWP SR-S4S

SR-EP4

SR-TB4 SR-TB4WP SR-TB4WPSR-TB4

SR-WB4 SR-WB4WP

SR-SA4

SR-FB4 SR-FB4

SR-FS4

SR-PP4

SR-EP4SR-EP4WP SR-EP4WP

Speakers

SR-H2L SR-H3S

Line Array Speakers Type H


ExtensionPlate

WallMountBracket

WallTiltBracket

FlyingBracket

StandAdapter

SR-H2S SR-H3L

SR-EP3

SR-WB3

SR-TB3

SR-FB3

SR-SA3


Speakers

SR-C8L/SR-C8S/SR-C15B SR-C8LWP/SR-C8SLWP/SR-C15BWP

Line Array Speakers Type C


RiggingFrame

Cluster Bracket

Rigging Support Bracket

TiltJointPlate

SR-RF8

SR-CL8

SR-SB8

SR-TP8

SR-RF8WP


SR-EP3

Speakers

SR-T5

Line Array Speaker Type T


WallPanBracket

SR-PB5

9998

Speakers

HX-5B HX-5W-WP FB-120B FB-120W



RiggingFrame

CeilingMountBracket

MountBracket

ExtensionBracket

SpeakerStandAdapter

HX-5W HX-5B-WP

HY-PF1B

HY-CW1B HY-CW1W HY-CW1WP

HY-WM2B

HY-WM1B HY-WM1W

HY-WM2W

HY-WM1WP HY-WM2WP

HY-CN1B HY-CN1W HY-CN1B-WP HY-CN1W-WP

HY-ST1

HY-PF1WPHY-PF1W HY-PF1B HY-PF1W

Speakers

HS-120B/HS-1200BT HS-150W/HS-1500WT

HS Series Speakers


VerticalInstallation

HorizontalInstallation

CeilingMountBracket

Wal

l/Cei

ling

Mou

nt B

rack

et

WallMountBracket

SpeakerStand

HS-120W/HS-1200WT HS-150B/HS-1500BT

HY-1500HBHY-1200HWHY-1200HB

HY-1200VWHY-1200VB

HY-C0801 HY-C0801W

HY-W0801 HY-W0801W

ST-34B

HY-1500HW

HY-1500VB HY-1500VW

HY-C0801

HY-W0801

HY-C0801W

HY-W0801W

Speakers

H-1

FGM Speakers


CeilingMountBracket

WallMountBracket

SpeakerStand

BS-1030B/W

ST-16A

HY-H1Adaptor Frame

SP-410

HY-0851CL HY-0871CLHY-C0801 *1

HY-0851CL

HY-B0801 *1

ST-34B

HY-W0801 *1 HY-0871WSHY-0871CL

HY-0851ST *2 HY-0852ST *3

Speakers

ES-0851 ES-0871

Engineered-Sound Speaker System


CeilingMountBracket

WallMountBracket

CeilingPipeBracket

SpeakerMountBracket

SpeakerStand

*Use withHY-0851ST.

*1: Use with Speaker Mounting Bracket HY-0851ST or HY-0852ST.*2: Use with HY-B0801, HY-C0801, HY-W0801 or Stand ST-34B.*3: Use with HY-B0801, HY-C0801 or HY-W0801.

99

Speakers

HX-5B HX-5W-WP FB-120B FB-120W



RiggingFrame

CeilingMountBracket

MountBracket

ExtensionBracket

SpeakerStandAdapter

HX-5W HX-5B-WP

HY-PF1B

HY-CW1B HY-CW1W HY-CW1WP

HY-WM2B

HY-WM1B HY-WM1W

HY-WM2W

HY-WM1WP HY-WM2WP

HY-CN1B HY-CN1W HY-CN1B-WP HY-CN1W-WP

HY-ST1

HY-PF1WPHY-PF1W HY-PF1B HY-PF1W

Speakers

HS-120B/HS-1200BT HS-150W/HS-1500WT

HS Series Speakers


VerticalInstallation

HorizontalInstallation

CeilingMountBracket

Wal

l/Cei

ling

Mou

nt B

rack

et

WallMountBracket

SpeakerStand

HS-120W/HS-1200WT HS-150B/HS-1500BT

HY-1500HBHY-1200HWHY-1200HB

HY-1200VWHY-1200VB

HY-C0801 HY-C0801W

HY-W0801 HY-W0801W

ST-34B

HY-1500HW

HY-1500VB HY-1500VW

HY-C0801

HY-W0801

HY-C0801W

HY-W0801W

Speakers

H-1

FGM Speakers


CeilingMountBracket

WallMountBracket

SpeakerStand

BS-1030B/W

ST-16A

HY-H1Adaptor Frame

SP-410

HY-0851CL HY-0871CLHY-C0801 *1

HY-0851CL

HY-B0801 *1

ST-34B

HY-W0801 *1 HY-0871WSHY-0871CL

HY-0851ST *2 HY-0852ST *3

Speakers

ES-0851 ES-0871

Engineered-Sound Speaker System


CeilingMountBracket

WallMountBracket

CeilingPipeBracket

SpeakerMountBracket

SpeakerStand

*Use withHY-0851ST.

*1: Use with Speaker Mounting Bracket HY-0851ST or HY-0852ST.*2: Use with HY-B0801, HY-C0801, HY-W0801 or Stand ST-34B.*3: Use with HY-B0801, HY-C0801 or HY-W0801.

100

Metal Rack-Mount Selection ChartMountable Equipment

Name

Am

plifi

ers

IP In

terc

om S

yste

m

Mixer Ampli�er

Power Ampli�er

Model

A-2060A-2030

A-706

A-724

A-712

P-1812

P-2240

A-1803

A-1806

A-1724

A-1706A-1712

A-1812 MB-25B (2-size)Color: Black

A-2120A-2240

Appearance Appearance, Size and Color Setting

Rack Mounting Brackets

MB-35B (3-size)Color: Black


900 Series

BG 200 Series

BG 2000 Series

Audio Interface Unit

Telephone Interface Unit

CO Interface Unit

MB-25B

MB-25B

MB-35B

MB-1000

A-906MK2A-903MK2

A-912MK2

P-912MK2

M-900MK2

VP-1061

VP-1121

P-906MK2

BG-2060

BG-2035

BG-2120

N-8000AL

N-8000AF

N-8000CO

P-924MK2

Mountable Equipment

Name

Wir

eles

s M

icro

phon

e S

yste

mPr

ogra

m T

imer

& O

ther

Equ

ipm

ent

Net

wor

k-R

elat

ed S

yste

m

Program Timer

UHF Wireless Tuner

Infrared Wireless Tuner

Power Antenna Distributor

VM-2000 Series

Sound Repeater

Model

EV-20R

WT-5805

WT-4820

TT-104B

AM/FM TunerDT-930

IR-702T

IR-700DInfrared Wireless Distributor

WT-5800

WD-4800



MB-WT3 (1-size)Color: Black



MB-WT4

MB-15B


MB-15B

MB-WT3


NX-100

MB-15B-BK (1-size)(Color: Black

MB-15B-J (1-size)Color: Black

MB-15B-K

MB-15B-J

NX-100S

MB-25B-K

MB-25B-J

BG-220

BG-235

BA-235

BA-260

MB-25B-BK (2-size)Color: Black

MB-1000Color: Black


MB-25B-K

MB-25B-J



Voic

e E

vacu

atio

n S

yste

m

VM-2120

VM-2240

MB-36 (3-size)Color: Gray

MB-36



MB-15B-K

MB-15B-J

101100

Mountable Equipment

Name

Am

plifi

ers

IP In

terc

om S

yste

m

Mixer Ampli�er

Power Ampli�er

Model

A-2060A-2030

A-706

A-724

A-712

P-1812

P-2240

A-1803

A-1806

A-1724

A-1706A-1712

A-1812 MB-25B (2-size)Color: Black

A-2120A-2240





900 Series

BG 200 Series

BG 2000 Series

Audio Interface Unit

Telephone Interface Unit

CO Interface Unit

MB-25B

MB-25B

MB-35B

MB-1000

A-906MK2A-903MK2

A-912MK2

P-912MK2

M-900MK2

VP-1061

VP-1121

P-906MK2

BG-2060

BG-2035

BG-2120

N-8000AL

N-8000AF

N-8000CO

P-924MK2

Mountable Equipment

Name

Wir

eles

s M

icro

phon

e S

yste

mPr

ogra

m T

imer

& O

ther

Equ

ipm

ent

Net

wor

k-R

elat

ed S

yste

m

Program Timer

UHF Wireless Tuner

Infrared Wireless Tuner

Power Antenna Distributor

VM-2000 Series

Sound Repeater

Model

EV-20R

WT-5805

WT-4820

TT-104B

AM/FM TunerDT-930

IR-702T

IR-700DInfrared Wireless Distributor

WT-5800

WD-4800






MB-WT4

MB-15B


MB-15B

MB-WT3


NX-100



MB-15B-K

MB-15B-J

NX-100S

MB-25B-K

MB-25B-J

BG-220

BG-235

BA-235

BA-260


MB-1000Color: Black


MB-25B-K

MB-25B-J



Voic

e E

vacu

atio

n S

yste

m

VM-2120

VM-2240

MB-36 (3-size)Color: Gray

MB-36



MB-15B-K

MB-15B-J

102

List of CE-Certified Models As of December 21, 2012

A

A-1706

A-1712

A-1724

A-1803

A-1806

A-1812

A-2030

A-2060

A-2120

A-2240

A-912MK2

AD-0910

AD-246

AD-1210P

AD-5000-2

AD-5000-6

AN-001T

AN-9001

B

BC-900

BC-5000-2

BC-5000-6

BC-5000-12

BP-900

BS-1030B

BS-1030W

BS-1034

BS-1034S

BS-10WL

BS-5W

BS-633A

BS-633AT

BS-634

BS-634T

BS-678

BS-678B

BS-678BT

BS-678T

BS-680F

BS-680FC

C

C-001T

CA-115

CA-130

CA-160CM-760CM-960CP-73CP-77CP-93CP-97CS-154CS-304CS-64

D

D-001T

D-901

D-911

D-921E

D-921F

D-922E

D-922F

D-923AE

D-936R

D-961SP

D-971E

D-971M

D-971R

D-972AE

D-981

D-983

D-984VC

D-2000AD1

D-2000CB

D-2000DA1

D-2012C

D-2080SP

DA-250D

DA-250DH

DA-250F

DA-250FH

DA-500F

DA-550FH

DP-0206

DP-K1

DP-L2

DQ-A01

DQ-A02

DQ-C01

DS-1000B

E

E-1231

E-232

EM-410

EM-600

EM-700

EM-800

ER-1203

ER-1206

ER-1206S

ER-1206W

ER-1215

ER-1215S

ER-2215

ER-2215W

ER-2230W

ER-2930W

ER-3215

ER-520

ER-520S

ER-520W

ER-604W

ES-0422

ES-0422WP

ES-0424

ES-0424WP

ES-0426

ES-0426WP

ES-0851

ES-0871

ES-C0651

EV-200M

EV-20R

EV-350P

EV-350R

EV-CF128M

F

F-122C

F-1000B

F-1000BT

F-1000BTWP

F-1000W

F-1000WT

F-1000WTWP

F-1300BF-1300BTF-1300BTWPF-1300WF-1300WTF-1300WTWPF-2000BF-2000BTF-2000BTWPF-2000WF-2000WTF-2000WTWPF-2322CF-2352CF-2352SCF-2852CFB-100FB-120BFB-120W

G

GS-302

H

H-1

H-2

H-2WP

H-3

H-3WP

HB-1

HS-120B

HS-120W

HS-150B

HS-150W

HS-1200BT

HS-1200WT

HS-1500BT

HS-1500WT

HX-5B

HX-5B-WP

HX-5W

HX-5W-WP

I

IR-200BC

IR-200M

IR-300M

IR-500R

IR-510R

IR-520R

IR-700D

IR-702T

IR-802T

IR-820SP

J

JP-028B

M

M-243

M-66

M-633D

M-864D

M-9000M2

MB-TS900

MP-032B

MP-1216

MT-200

N

N-8000AF

N-8000AL

N-8000CO

N-8000DI

N-8000EX

N-8000MI

N-8000MS

N-8000RS

N-8010EX

N-8010MS

N-8010RS

N-8011MS

N-8020MS

N-8031MS

N-8033MS

N-8050DS

N-8050SB

N-8410MS

N-8510MS

N-8540SB

N-8600MS

N-8640DS

N-8650DS

NX-100

NX-100S

P

P-1812

P-2240

PC-1867F

PC-1867FC

PC-1869

PC-2369

PC-2668

PC-2852

PC-2869

PC-391

PC-391T

PC-3CL

PC-3WR

PC-648R

PC-658R

PE-304

PE-64

PJ-100W

PJ-200W

PJ-304

PJ-64

PM-20EV

PP-025B

PW-1230DB

PW-1230DW

PW-1230SB

PW-1430SW

PW-1430DB

PW-1430DW

PW-1430SB

PW-1430SW

R

RC-001T

RM-200M

RM-200RJ

RM-200SA

RM-200SF

RM-200X

RM-200XF

RM-210

RM-300MF

RM-320F

RS-140

RS-141

RS-142

RS-143

RS-144

RS-150

RS-160

RS-170

RS-180

RS-191

RS-450

RS-460

RS-470

RS-480

RS-481

S

S-20S

SC-610

SC-610M

SC-615

SC-615M

SC-630

SC-630M

SC-651

SR-A12L

SR-A12LWP

SR-A12S

SR-A12SWP

SR-A18B

SR-C8L

SR-C8LWP

SR-C8S

SR-C8SWP

SR-C15B

SR-C15BWP

SR-F09

SR-F09-V1

SR-F09-V2

SR-F09-V3

SR-L09

SR-F05

SR-H2L

SR-H2S

SR-H3L

SR-H3S

SR-M05L

SR-M05R

SR-M3L

SR-M3R

SR-T5

SS-9001

SV-200MA

SX-200RM

SX-2000

SX-2000AO

SX-2000CI

SX-2000CO

SX-2000SM

SX-2100AI

SX-2100AO

T

T-001T

TC-615

TC-615M

TC-631

TC-631M

TH-650

TH-660

TS-770

TS-771

TS-772

TS-773

TS-774

TS-775

TS-800

TS-801

TS-802

TS-900

TS-901

TS-902

TS-903

TS-904

TS-905

TS-907

TT-104B

TU-631

TU-631M

TU-651

TU-651M

TZ-105

TZ-205

U

U-01R

V

VM-2120

VM-2240

VM-3240E

VM-3360E

VM-3240VA

VM-3360VA

VP-200VX

VX-2000

VX-2000DS

VX-2000PF

VX-2000SF

VX-200PS

VX-200SE

VX-200SI

VX-200SO

VX-200SP

VX-200SP-2

VX-200SZ

VX-200SZ-2

VX-200XI

VX-200XR

VP-2122

VP-2241

VP-2421

W

WD-4800

WM-4300

WM-5225

WM-5265

WM-5270

WM-5325

WS-200

WS-300

WT-4820

WT-5800

WT-5805

WT-5810

WTU-4800

Y

YW-1022

YW-1024

YW-3500

YW-4500

YP-M5100

YP-M5300

YR-770-2M

YR-77-10M

Z

ZM-104A

ZM-9001

ZM-9002

ZM-9003

ZM-9011

ZM-9012

ZM-9013

ZM-9014

ZP-001T

103102

List of CE-Certified Models As of February 12, 2013

A

A-1706

A-1712

A-1724

A-1803

A-1806

A-1812

A-2030

A-2060

A-2120

A-2240

A-912MK2

AD-0910

AD-246

AD-1210P

AD-5000-2

AD-5000-6

AN-001T

AN-9001

B

BC-900

BC-5000-2

BC-5000-6

BC-5000-12

BP-900

BS-1030B

BS-1030W

BS-1034

BS-1034S

BS-10WL

BS-5W

BS-633A

BS-633AT

BS-634

BS-634T

BS-678

BS-678B

BS-678BT

BS-678T

BS-680F

BS-680FC

C

C-001T

CA-115

CA-130

CA-160CM-760CM-960CP-73CP-77CP-93CP-97CS-154CS-304CS-64

D

D-001T

D-901

D-911

D-921E

D-921F

D-922E

D-922F

D-923AE

D-936R

D-961SP

D-971E

D-971M

D-971R

D-972AE

D-981

D-983

D-984VC

D-2000AD1

D-2000CB

D-2000DA1

D-2012C

D-2080SP

DA-250D

DA-250DH

DA-250F

DA-250FH

DA-500F

DA-550FH

DP-0206

DP-K1

DP-L2

DQ-A01

DQ-A02

DQ-C01

DS-1000B

E

E-1231

E-232

EM-410

EM-600

EM-700

EM-800

ER-1203

ER-1206

ER-1206S

ER-1206W

ER-1215

ER-1215S

ER-2215

ER-2215W

ER-2230W

ER-2930W

ER-3215

ER-520

ER-520S

ER-520W

ER-604W

ES-0422

ES-0422WP

ES-0424

ES-0424WP

ES-0426

ES-0426WP

ES-0851

ES-0871

ES-C0651

EV-200M

EV-20R

EV-350P

EV-350R

EV-CF128M

F

F-122C

F-1000B

F-1000BT

F-1000BTWP

F-1000W

F-1000WT

F-1000WTWP

F-1300BF-1300BTF-1300BTWPF-1300WF-1300WTF-1300WTWPF-2000BF-2000BTF-2000BTWPF-2000WF-2000WTF-2000WTWPF-2322CF-2352CF-2352SCF-2852CFB-100FB-120BFB-120W

G

GS-302

H

H-1

H-2

H-2WP

H-3

H-3WP

HB-1

HS-120B

HS-120W

HS-150B

HS-150W

HS-1200BT

HS-1200WT

HS-1500BT

HS-1500WT

HX-5B

HX-5B-WP

HX-5W

HX-5W-WP

I

IR-200BC

IR-200M

IR-300M

IR-500R

IR-510R

IR-520R

IR-700D

IR-702T

IR-802T

IR-820SP

J

JP-028B

M

M-243

M-66

M-633D

M-864D

M-9000M2

MB-TS900

MP-032B

MP-1216

MT-200

N

N-8000AF

N-8000AL

N-8000CO

N-8000DI

N-8000EX

N-8000MI

N-8000MS

N-8000RS

N-8010EX

N-8010MS

N-8010RS

N-8011MS

N-8020MS

N-8031MS

N-8033MS

N-8050DS

N-8050SB

N-8410MS

N-8510MS

N-8540SB

N-8600MS

N-8640DS

N-8650DS

NX-100

NX-100S

P

P-1812

P-2240

PC-1867F

PC-1867FC

PC-1869

PC-2369

PC-2668

PC-2852

PC-2869

PC-391

PC-391T

PC-3CL

PC-3WR

PC-648R

PC-658R

PE-304

PE-64

PJ-100W

PJ-200W

PJ-304

PJ-64

PM-20EV

PP-025B

PW-1230DB

PW-1230DW

PW-1230SB

PW-1430SW

PW-1430DB

PW-1430DW

PW-1430SB

PW-1430SW

R

RC-001T

RM-200M

RM-200RJ

RM-200SA

RM-200SF

RM-200X

RM-200XF

RM-210

RM-300MF

RM-320F

RS-140

RS-141

RS-142

RS-143

RS-144

RS-150

RS-160

RS-170

RS-180

RS-191

RS-450

RS-460

RS-470

RS-480

RS-481

S

S-20S

SC-610

SC-610M

SC-615

SC-615M

SC-630

SC-630M

SC-651

SR-A12L

SR-A12LWP

SR-A12S

SR-A12SWP

SR-A18B

SR-C8L

SR-C8LWP

SR-C8S

SR-C8SWP

SR-C15B

SR-C15BWP

SR-F09

SR-F09-V1

SR-F09-V2

SR-F09-V3

SR-L09

SR-F05

SR-H2L

SR-H2S

SR-H3L

SR-H3S

SR-M05L

SR-M05R

SR-M3L

SR-M3R

SR-T5

SS-9001

SV-200MA

SX-200RM

SX-2000

SX-2000AO

SX-2000CI

SX-2000CO

SX-2000SM

SX-2100AI

SX-2100AO

T

T-001T

TC-615

TC-615M

TC-631

TC-631M

TH-650

TH-660

TS-770

TS-771

TS-772

TS-773

TS-774

TS-775

TS-800

TS-801

TS-802

TS-900

TS-901

TS-902

TS-903

TS-904

TS-905

TS-907

TT-104B

TU-631

TU-631M

TU-651

TU-651M

TZ-105

TZ-205

U

U-01R

V

VM-300SV

VM-2120

VM-2240

VM-3240E

VM-3360E

VM-3240VA

VM-3360VA

VP-200VX

VP-1061

VP-1121

VP-1241

VP-1361

VP-2064

VP-2122

VP-2241

VP-2421

VX-2000

VX-2000DS

VX-2000PF

VX-2000SF

VX-200PS

VX-200SE

VX-200SI

VX-200SO

VX-200SP

VX-200SP-2

VX-200SZ

VX-200SZ-2

VX-200XI

VX-200XR

W

WD-4800

WM-4300

WM-5225

WM-5265

WM-5270

WM-5325

WS-200

WS-300

WT-4820

WT-5800

WT-5805

WT-5810

WTU-4800

Y

YW-1022

YW-1024

YW-3500

YW-4500

YP-M5100

YP-M5300

YR-770-2M

YR-77-10M

Z

ZM-104A

ZM-9001

ZM-9002

ZM-9003

ZM-9011

ZM-9012

ZM-9013

ZM-9014

ZP-001T

104

A

A-706

A-712

A-724

A-2060

A-2120

A-2240

A-903MK2

A-9060DHM2

A-9060SM2

A-906MK2

A-9120DHM2

A-9120DLM2

A-9120SM2

A-912MK2

A-9240SHM2

B

BA-235

BA-260

BC-900

BG-220

BG-235

BG-2035

BG-2060

BG-2120

D

D-2000AD1

D-2000CB

D-2000DA1

D-2008SP

D-901

D-911

D-921E

D-921F

D-922E

D-922F

D-923AE

D-936R

D-961SP

D-971E

D-971M

D-971R

D-972AE

D-981

D-983

D-984VC

DA-250D

DA-250DH

DA-250F

DA-250FH

DA-500F-HL

DA-550F

DP-0206

DP-K1

DP-L2

E

E-1231

E-232

M

M-243

M-633D

M-9000M2

M-900MK2

MP-1216

N

N-8000AF

N-8000AL

N-8000CO

N-8000DI

N-8000EX

N-8000MI

N-8000MS

N-8000RS

N-8010EX

N-8010MS

N-8010RS

N-8011MS

N-8020MS

N-8031MS

N-8050DS

N-8400RS

N-8410MS

P

P-9060DH

P-906MK2

P-9120DH

P-912MK2

PN-100B

PU-200

R

RS-140

RS-141

ES-143

RS-144

RS-150

RS-160

RS-170

RS-180

RS-191

RS-450

RS-460

RS-470

RS-480

RS-481

T

TS-770

W

W-906A

W-912A

WD-4800

List of UL-Certified Models As of December 21, 2012

105104

E

E-232 ....................................... 53 E-7000TB ................................ 32 E-1231 ..................................... 53 EC-100M ................................. 89 EM-410 .................................... 90 EM-600 .................................... 90 EM-700 .................................... 90 EM-800 .................................... 90 ER-520 .................................... 92 ER-520S .................................. 92 ER-520W ................................. 92 ER-604W ................................. 94 ER-1000 .................................. 94 ER-1203 .................................. 92 ER-1206 .................................. 92 ER-1206S ................................ 92 ER-1206W ............................... 92 ER-1215 .................................. 92 ER-1215S ............................... .92 ER-2215 .................................. 93 ER-2215W ............................... 93 ER-2230W ............................... 93 ER-2930W ............................... 93 ER-3215 .................................. 93 ES-0422WP ............................. 60 ES-0424WP ............................. 60 ES-0426WP ............................. 60 ES-0851 ............................. 60, 99 ES-0871 ............................. 60, 99 ES-C0651 ................................ 60 EV-20R. ........................... 19, 101 EV-200M ............................ 10, 15 EV-350P ................................... 19 EV-350R .................................. 19 EV-CF128M ............................. 19

C

C-001T .................................... 39 CK-025 .................................... 20 CM-760 ................................... 69 CM-960 ................................... 69 CP-73 ...................................... 69 CP-77 ...................................... 69 CP-93 ...................................... 69 CP-97.......................................69 CR-131N ................................. 22 CR-273 .................................... 22 CR-413 .................................... 22 CR-413-6 ................................. 22 CS-64 ...................................... 75 CS-154 .................................... 75 CS-304 .................................... 75

D

D-001T .................................... 38 D-001R .................................... 38 D-901 ...................................... 49 D-911 ...................................... 49 D-921E ................................ 6, 49 D-921F ................................ 6, 49 D-922E ................................ 6, 49 D-922F. ................................ 6, 49 D-923AE .................................. 50 D-936R ................................ 6, 50 D-961SP .................................. 50 D-971E .................................... 50 D-971M ................................... 50 D-971R .................................... 50 D-972AE .................................. 50 D-981 ...................................... 50 D-983 ...................................... 50 D-984VC .................................. 49 D-2000AD1 ............................. 48 D-2000DA1 ............................. 48 D-2000CB ............................... 48 D-2008SP ................................ 48 D-2012AS ................................ 48 D-2012C .................................. 48 DA-250D ................................. 36 DA-250DH ............................... 36 DA-250F .................................. 35 DA-250FH ............................... 35 DA-500FH ............................... 34 DA-500F-HL ............................ 34 DA-550F .................................. 34 DM-1100 ................................. 89 DM-1200 ................................. 89 DM-1300 ................................. 89 DM-1500 ................................. 89 DM-524B ................................. 90 DM-524S ................................. 90 DP-0206 .................................. 52 DP-K1 ...................................... 52 DP-L2 ...................................... 53 DP-SP3 .................................... 53 DQ-A01 ................................... 52 DQ-A02 ................................... 52 DQ-C01 ................................... 52 DS-029B .................................. 21 DS-1000B ................................ 21 DT-930 ............................. 20, 101

106

IndexA

A-230........................................47 A-706 ....................................... 44 A-712 ....................................... 44 A-724 ....................................... 44 A-903MK2 ....................... 41, 100 A-906MK2 ....................... 41, 100 A-912MK2 ....................... 41, 100 A-2030 ............................. 45, 100 A-2060 ............................. 45, 100 A-2120 ............................. 45, 100 A-2240 ............................. 45, 100 A-1706 ............................. 47, 100 A-1712 ............................ 47, 100 A-1724 ............................. 47, 100 A-1803 ............................ 46, 100 A-1806. ........................... 46, 100 A-1812 ............................. 46, 100 A-9060DHM2 .......................... 37 A-9060SM2 ............................. 37 A-9120DHM ............................ 37 A-9120SM2 ............................. 37 A-9240SHM2 ........................... 37 AD-011 .................................... 21 AD-031B .................................. 21 AD-0910. ................................. 79 AD-246. ................................... 23 AD-1210P ................................ 32 AD-1215P ................................ 32 AD-5000-2 ............................... 84 AD-5000-6 ............................... 84 AN-001T. ................................. 38 AN-9001 .................................. 40 AT-063P. ................................... 77 AT-303P ................................... 77 AT-603P ................................... 77 ATT-311 ................................... 69

B

BA-235 ............................ 44, 100 BA-260 ............................ 44, 100 BC-900 .................................... 79 BC-5000-2 ............................... 84 BC-5000-6 ............................... 84 BC-5000-12 ............................. 84 BG-220 ............................ 44, 100 BG-235 ............................ 44, 100 BG-2035 .......................... 44, 100 BG-2060 .......................... 44, 100 BG-2120 .......................... 44, 100 BK-013B .................................. 22 BK-023B .................................. 22 BK-033B .................................. 22 BP-031B .................................. 22 BP-900 .................................... 79 BS-5W. ..................................... 72 BS-10WL ................................. 72 BS-633A .................................. 72 BS-633AT ................................ 72 BS-634 .................................... 71 BS-634T .................................. 71 BS-678 .................................... 71 BS-678B .................................. 71 BS-678BT ................................ 71 BS-678T. .................................. 71 BS-680F .................................. 70 BS-680FC ................................ 71 BS-1030B .......................... 72, 98 BS-1030W ......................... 72, 98 BS-1034 .................................. 71 BS-1034S ................................ 71 BU-412 .................................... 22

HY-0871CL .............................. 99 HY-0871WS..............................99 HY-1200HB...............................99 HY-1200HW..............................99 HY-1200VB...............................99 HY-1200VW ............................. 99 HY-1500HB .............................. 99 HY-1500HW ............................. 99 HY-1500VB .............................. 99 HY-1500VW ............................. 99 HY-AH1 .................................... 65 HY-B0801 ................................ 99 HY-BC1 .................................... 65 HY-BH10B ............................... 95 HY-C0801 ................................ 99 HY-C0801W ............................. 99 HY-CL10B ................................ 95 HY-CL20B ................................ 95 HY-CM10B ............................... 95 HY-CM10W .............................. 95 HY-CM20B ............................... 95 HY-CM20W .............................. 95 HY-CN1B ................................. 98 HY-CN1B-WP .......................... 98 HY-CN1W ................................ 98 HY-CN1W-WP .......................... 98 HY-CW1B ................................ 98 HY-CW1W ................................ 98 HY-CW1WP ............................. 98 HY-H1 ...................................... 98 HY-PF1B .................................. 98 HY-PF1W. ................................. 98 HY-PF1WP ............................... 98 HY-RR1 ................................... .65 HY-RR2 .................................... 65 HY-ST1 .................................... 98 HY-TB1 .................................... 65 HY-TR1 .................................... 65 HY-W0801 ............................... 99 HY-W0801W ............................ 99 HY-WM1B ................................ 98 HY-WM1W ............................... 98 HY-WM1WP ............................. 98 HY-WM2B ................................ 98 HY-WM2W ............................... 98 HY-WM2WP ............................. 98 HX-5B ................................ 58, 98 HX-5B-WP ......................... 58, 98 HX-5W ............................... 58, 98 HX-5W-WP. ........................ 58, 98

I

IR-200BC ................................. 87 IR-200BT ................................. 87 IR-200M ................................... 87 IR-300M ................................... 87 IR-500R ................................... 88 IR-510R ................................... 88 IR-520R ................................... 88 IR-700D ........................... 87, 101 IR-702T ............................ 87, 101 IR-802SP ................................. 88 IR-802T ............................ 88, 101 IT-450................................. 12, 15

107106

F

F-122C .................................... 64 F-1000B ............................. 62, 95 F-1000BT ........................... 62, 95 F-1000BTWP ..................... 62, 95 F-1000W ............................ 62, 95 F-1000WT .......................... 62, 95 F-1000WTWP ................... 62, 95 F-1300B ............................. 62, 95 F-1300BT ........................... 62, 95 F-1300BTWP ..................... 63, 95 F-1300W ............................ 62, 95 F-1300WT .......................... 62, 95 F-1300WTWP .................... 63, 95 F-1522SC ................................ 65 F-2000B ............................. 63, 95 F-2000BT ........................... 63, 95 F-2000BTWP ..................... 63, 95 F-2000W ............................ 63, 95 F-2000WT. ......................... 63, 95 F-2000WTWP .................... 63, 95 F-2322C .................................. 64 F-2352C .................................. 64 F-2352SC ................................ 65 F-2852 ..................................... 64 FB-120B ............................ 58, 98 FB-120W ........................... 58, 98 FG-C0651 ................................ 60 FS-7000AT ............................... 16 FS-7000CP .............................. 16 FS-7000EV .............................. 17 FS-7000GM ............................. 17 FS-7000JP ............................... 17 FS-7000PS .............................. 16 FS-7000RF .............................. 17 FS-7000RM ............................. 17 FS-7006PA ............................... 17 FS-7010CP .............................. 16 FS-7010RM ............................. 18 FS-7012PA ............................... 17

G

GS-302 .................................... 77

H

H-1. ................................... 61, 98 H-2 .......................................... 61 H-2WP ..................................... 61 H-3 .......................................... 61 H-3WP ..................................... 61 HB-1 ........................................ 61 HS-120B ............................ 66, 99 HS-120W ........................... 66, 99 HS-150B ............................ 66, 99 HS-150W ........................... 66, 99 HS-1200BT ........................ 66, 99 HS-1200WT. ...................... 66, 99 HS-1500BT ........................ 66, 99 HS-1500WT. ...................... 66, 99 HY-0851CL .............................. 99 HY-0851ST .............................. 99 HY-0852ST .............................. 99

J

JB-031B .................................. 21 JP-028B ................................... 21

M

M-01F ...................................... 10 M-01T ...................................... 10 M-66 ........................................ 51 M-243 ...................................... 51 M-633D ................................... 51 M-900MK2 ............................... 41 M-9000M2 ....................... 38, 100 MB-15B ..........................................101 MB-15B-BK ........................... 101 MB-15B-J .............................. 101 MB-25B ................................. 100 MB-25B-BK ........................... 100 MB-25B-J .............................. 100 MB-35B ................................. 100 MB-36 .................................... 101 MB-1000 ................................ 100 MB-TS900 ............................... 79 MB-WT3 ................................ 101 MB-WT4 ................................ 101 MP-011 .................................... 20 MP-032B ................................. 20 MP-1216 .................................. 20 MT-200..................................... 58 MT-251H .................................. 36 MT-S0301 ................................ 57 MT-S0601 .......................... 56, 60

N

N-8000AF ........................ 25, 100 N-8000AL ........................ 25, 100 N-8000CO ....................... 25, 100 N-8000DI ................................. 25 N-8000EX ................................ 24 N-8010EX ................................ 24 N-8000MI ................................ 24 N-8000MS ............................... 28 N-8000RS ................................ 26 N-8010MS ............................... 28 N-8010RS ................................ 26 N-8011MS ............................... 28 N-8020MS ............................... 28 N-8031MS ............................... 29 N-8033MS ............................... 29 N-8031SB ................................ 29 N-8050DS ................................ 29 N-8400RS ................................ 26 N-8410MS ............................... 31 N-8050SB ................................ 29 N-8510MS ............................... 27 N-8600MS ............................... 27 N-8640DS ................................ 27 N-8640SB ................................ 28 N-8650DS ................................ 27 NDC-2435 ............................... 21 NDC-2460 ............................... 21 NX-100 ............................ 23, 101 NX-100S .......................... 23, 101

108

SR-T5 ................................ 57, 97 SR-TB3 .................................... 97 SR-TB4 .................................... 96 SR-TB4WP ............................... 96 SR-TP8 .................................... 97 SR-TP12 .................................. 96 SR-WB3 ................................... 97 SR-WB4 ................................... 96 SR-WB4WP ............................. 96 SS-021B .................................. 22 SS-9001 ................................... 40 ST-16A ......................... 93, 95, 98 ST-34B ............................... 66, 99 ST-65A ..................................... 90 ST-66A ..................................... 90 ST-73A ..................................... 90 ST-121 ..................................... 90 ST-303A ................................... 91 ST-304A ................................... 91 ST-321B ................................... 91 ST-322B ................................... 91 ST-506 ..................................... 90 ST-507 ..................................... 90 ST-800 ..................................... 90 SV-200MA ............................... 15 SX-200RM ................................. 6 SX-2000AO ............................... 5 SX-2000CI ................................. 5 SX-2000CO ............................... 5 SX-2000SM ............................... 4 SX-2100AI ................................. 4 SX-2100AO ............................... 5

T

T-001T...................................... 38 TC-615 .................................... 74 TC-615M ................................. 74 TC-631 .................................... 74 TC-631M ................................. 74 TC-651M ................................. 74 TH-650 .................................... 72 TH-660 .................................... 72 TM-60T .................................... 75 TP-M15D ................................. 75 TP-M15E .................................. 75 TS-770 ..................................... 81 TS-771 ..................................... 81 TS-772 ..................................... 81 TS-773 ..................................... 81 TS-774 ..................................... 81 TS-775 ..................................... 81 TS-800 ..................................... 78 TS-801 ..................................... 78 TS-802 ..................................... 79 TS-900 ..................................... 78 TS-901 ..................................... 78 TS-902 ..................................... 78 TS-903 ..................................... 79 TS-904 ..................................... 79 TS-905 ..................................... 79 TS-907 ..................................... 79 TT-104B ........................... 19, 101 TU-631 .................................... 73 TU-631M ................................. 73 TU-651 .................................... 73 TU-651M ................................. 73 TZ-105 ..................................... 76 TZ-205 ..................................... 76

P

P-906MK2 ....................... 41, 100 P-912MK2 ....................... 41, 100 P-924MK2 ...................... 41, 100 P-1812 ............................. 46, 100 P-2240 ............................. 45, 100 P-9060DH ................................ 37 P-9120DH ................................ 37 PA-3640VB .............................. 11 PC-3CL .................................... 70 PC-3WR ................................... 70 PC-139 .................................... 70 PC-391 .................................... 77 PC-391T .................................. 77 PC-648R .................................. 68 PC-658R .................................. 68 PC-1867F ................................ 70 PC-1867FC .............................. 70 PC-1869 .................................. 68 PC-2268 .................................. 69 PC-2268WP ............................. 69 PC-2369 .................................. 68 PC-2668 .................................. 69 PC-2852 .................................. 68 PC-2869 .................................. 68 PE-64 ....................................... 76 PE-304 ..................................... 76 PF-013B .................................. 22 PF-023B .................................. 22 PF-1100 ................................... 22 PJ-64 ....................................... 76 PJ-100W .................................. 76 PJ-200W .................................. 76 PJ-304 ..................................... 76 PM-120 .................................... 89 PM-222 .................................... 89 PM-660 .................................... 89 PM-660D ................................. 89 PM-660U ................................. 89 PP-025B .................................. 20 PS-011B .................................. 21 PW-1230DB ............................. 67 PW-1230DW ............................ 67 PW-1230SB ............................. 67 PW-1230SW ............................ 67 PW-1430DB ............................. 67 PW-1430DW ............................ 67 PW-1430SB ............................. 67 PW-1430SW ............................ 67

R

RC-001T .................................. 39 RM-200M ........................... 13, 14 RM-200RJ ................................. 7 RM-200SA ................................. 7 RM-200SF ................................. 6 RM-200X ................................... 8 RM-200XF ................................. 8 RM-210. ..................... 7, 8, 13, 14 RM-300MF ............................... 13 RM-320F .................................. 13 RS-140 .................................... 30 RS-141 .................................... 30 RS-142 .................................... 30 RS-143 .................................... 30 RS-144 .................................... 30 RS-150 .................................... 30 RS-160 .................................... 30

RS-170 .................................... 30 RS-180 .................................... 30 RS-191 .................................... 29 RS-450 .................................... 31 RS-460 .................................... 31 RS-470 .................................... 31 RS-480 .................................... 31 RS-481 .................................... 31 RU-2001 .................................. 90 RU-2002 .................................. 90 TC-615 .................................... 74

S

SC-240 .................................... 75 SC-610 .................................... 73 SC-610M ................................. 73 SC-615 .................................... 73 SC-615M..................................73 SC-630.....................................74 SC-630M..................................74 SC-651 .................................... 74 SP-131 ............................... 77, 95 SP-201 ..................................... 77 SP-301 ..................................... 77 SP-410 ..................................... 98 SP-1100 ................................... 93 SR-A12L ............................ 54, 96 SR-A12LWP ....................... 54, 96 SR-A12S ............................ 54, 96 SR-A12SWP ...................... 54, 96 SR-A18B ............................ 54, 96 SR-C8L .............................. 55, 97 SR-C8LWP ......................... 55, 97 SR-C8S .............................. 55, 97 SR-C8SWP ........................ 55, 97 SR-C15B ........................... 55, 97 SR-C15BWP ...................... 55, 97 SR-CL8 .................................... 97 SR-EP3 .................................... 97 SR-EP4 .................................... 96 SR-EP4WP ............................... 96 SR-F05 .................................... 59 SR-F09 .................................... 59 SR-F1D .................................... 59 SR-FB3 .................................... 97 SR-FB4 .................................... 96 SR-FS4 .................................... 96 SR-H2L .............................. 57, 97 SR-H2S .............................. 57, 97 SR-H3L .............................. 57, 97 SR-H3S .............................. 57, 97 SR-L09 .................................... 59 SR-L1B .................................... 59 SR-M05L ................................. 59 SR-M05R ................................. 59 SR-PB5 .................................... 97 SR-PP4 .................................... 96 SR-RF12 .................................. 96 SR-RF12WP ............................. 96 SR-RF8 .................................... 97 SR-RF8WP ............................... 97 SR-S4L .............................. 56, 96 SR-S4LWP. ......................... 56, 96 SR-S4S .............................. 56, 96 SR-S4SWP ......................... 56, 96 SR-SA3 .................................... 97 SR-SA4 .................................... 96 SR-SB8 .................................... 97

109108

Y

YA-8 ......................................... 20 YA-706 ..................................... 22 YA-7000 ................................... 18 YC-150 .............................. 32, 77 YC-150E .................................. 77 YC-241 .................................... 32 YC-251 .................................... 32 YC-280 .................................... 32 YC-290 .................................... 32 YC-302 .................................... 32 YC-801 .................................... 32 YC-802 .................................... 32 YC-822 .................................... 32 YC-823 .................................... 32 YC-841 .................................... 32 YC-850 .................................... 32 YM-1J ...................................... 91 YM-3CF ................................... 91 YM-3CM .................................. 91 YM-121 .................................... 90 YP-1AF .............................. 77, 91 YP-E401 ............................ 83, 86 YP-E401PAD01 ........................ 82 YP-E5000 ................................ 83 YP-M101 ............................ 86, 87 YP-M201 .................................. 86 YP-M301 ............................ 86, 87 YP-M5300 ................................ 82 YP-M5310 ................................ 82 YR-770-2M .............................. 81 YR-770-10M ............................ 81 YS-4CF .................................... 77 YS-4CM ................................... 77 YS-11A .............................. 77, 91 YS-13A .............................. 32, 77 YS-60B .............................. 77, 95 YS-301 ..................................... 76 YW-1022 ............................ 79, 87 YW-1024 ............................ 79, 87 YW-4500 .................................. 84

Z

ZM-104A ................................. 77 ZM-9001 .................................. 39 ZM-9002 .................................. 39 ZM-9003 .................................. 39 ZM-9011 .................................. 39 ZM-9012 .................................. 40 ZM-9013 .................................. 40 ZM-9014 .................................. 40 ZP-001T ................................... 39

U

U-01F ...................................... 10 U-01R ...................................... 10 U-03R ...................................... 10 UC-200A ................................. 73

V

VM-300SV ............................... 12 VM-2120 .......................... 14, 101 VM-2240 .......................... 14, 101 VM-3240E ................................ 12 VM-3360E ................................ 12 VM-3240VA .............................. 12 VM-3360VA .............................. 12 VP-200VX .................................. 9 VP-1061 ........................... 11, 100 VP-1121 ........................... 11, 100 VP-1241 ................................... 11 VP-1361 ................................... 11 VP-2064 ................................... 10 VP-2122 ................................... 10 VP-2241 ................................... 10 VP-2421 ................................... 10 VX-200PS .................................. 9 VX-200SO ................................ 10 VX-200SE ................................ 10 VX-200SI ................................. 10 VX-200SP .................................. 9 VX-200SP-2 ............................... 9 VX-200SZ .................................. 9 VX-200SZ-2 ............................. 10 VX-200XI ................................... 9 VX-200XR .................................. 9

W

W-906A ................................... 41 W-912A ................................... 41 WA-1822 .................................. 84 WA-1822C ............................... 84 WB-2000-2...............................84 WB-RM200 ................................ 9 WD-4800 ......................... 83, 101 WH-4000A ............................... 82 WH-4000H ............................... 82 WH-4000P ............................... 82 WH-4000S ............................... 82 WM-2100 ................................. 86 WM-2110..................................86 WM-4300..................................82 WM-5225..................................82 WM-5265..................................82 WM-5270..................................82 WM-5325..................................82 WS-200.....................................85 WS-300.....................................85 WS-300H..................................85 WS-5225...................................85 WS-5265...................................85 WS-5325U................................85 WS-5325M................................85 WS-5325H................................85 WT-2100 .................................. 86 WT-4820 .......................... 83, 101 WT-5800 .......................... 83, 101 WT-5100 .................................. 83 WT-5805 .......................... 83, 101 WT-5810 .................................. 83 WTU-4800 ......................... 83, 93

110

1st Numeral: Protection against solid foreign objects 2nd Numeral: Protection against ingress of water

01

2

3

4

5

6

X

01

2

3

4

5

6

7

8

X

Non-protected Non-protectedProtected against solid foreign objects of 50mm ø and greater.

Protected against vertically falling water drops.

Protected against solid foreign objects of 12.5mm ø and greater.

Protected against vertically falling water drops when enclosure titled up to 15°.


Protected against splaying water.


Protected against splashing water.

Dust-protected Protected against water jets.

Dust-tight Protected against powerful water jets.

Not tested Protected against the effects of temporary immersion in water.

Protected against the effects of continuous immersion in water.

Not tested

IP Grade Panel

What is IP standard?This standard provides a system for classifying the degrees of protection provided by the enclosures of electrical equipment under the International Electrotechnical Commission (IEC) publication 529.The type of protection covered by this system of classification is as follows.a) Protection of persons against contact with or approach to live parts and against contact with moving parts inside the enclosure and protection of the equipment against ingress of solid foreign bodies.b) Protection of the equipment inside the enclosure against harmful ingress of water.

111110

* TOA has been granted the “ISO 9001 (BS 575)” registration in the 9000 Series of Quality Assurance Standards by the International Organization for Standardization (ISO).

112

Specifications are subject to change without notice.Printed in Japan (1303) 833-52-284-5C

www.toa.jp

Documents

2013–2014toa.com.br/wp-content/uploads/2015/03/TOA-2013_2014_products_li… · Type H Series Type T Series Compact Array Speakers Type S Series Subwoofers Floor Monitor Speakers