Upload
elite-cycle-imports
View
219
Download
2
Embed Size (px)
DESCRIPTION
2012 VSI Catalog
Citation preview
Don’t you love getting a killer snap then pull everyone down the first straight, or getting a trick for the first after dozens of tries or the wind in your face as you course down a technical downhill trail? We certainly do. As avid riders, our experiences on the bike are what keep us motivated to keep producing the best BMX and mountain bike products available. At VSI we take pride in serving the bicycle industry and consumers with our brands, products, knowledge and enthusiasm.
During the past few months, we have implemented some positive changes with more coming in the near future. All are aimed at bringing us closer to our customers, be they wholesalers, retailers or consumers. Notably, our shipping program received a complete makeover. We now offer affordable and competitive UPS Ground shipping rates to retailers throughout the 48 contiguous states. We ship bicycles for a flat $10 fee, while qualifying bike orders ship free. Parts and accessories are shipped at a separate rate, but equally affordable. For orders of at least $500, shipping is on us. Shipping costs should no longer be a determining factor when deciding to purchase from VSI. We’ve also done extensive work to reorganize our warehouse, optimizing product placement and inventory handling to reduce picking times. More important, our staff has gone through specific training to improve our service level and order fulfillment accuracy. This has allowed us to achieve a 100 percent same-day fill rate for qualifying orders. In the sales office we have invested in our staff and improved procedures. When you call VSI, any of our inside sales representatives are ready and able to assist you. They have access to complete all dealer order histories and backgrounds, so we can efficiently handle your orders and save you time. You will be more than satisfied with our ability to please. In September, we will begin the launch of Shopatron online stores for each of our brands. With Shopatron, retailers have the ability to fulfill orders captured in these stores and get paid the next day. It’s a fantastic way to bring online business to VSI while keeping our dealers in the loop and profitable. From a product standpoint, we continue to refine the broad range of amazing products across all our brands. We offer the most diverse and balanced BMX racing bicycle line; the most graphic-rich and lightest weight fullface helmets on the market; new ultra-lightweight racing frames by Intense and Speed; amazing U.S.-made EYE freestyle frames; as well as many other products serving the needs of mountain bikers and BMXers alike. Consumer demand for all our brands continues to grow. We are most proud of the way THE, Speed, Sinz Elite and Vigor are growing. THE is leading the way with the T2 and Point 5 helmets, Speed is the most successful new BMX racing brand, Sinz Elite’s line of innovative forks, cranks and components are best sellers, while retailers and consumers are Vigors is getting reacquainted with retailers and consumers with great looking and fitting affordable helmets. Sinz remains the only full parts offering for racing bikes. Intense BMX is still the choice of many due to the great geometry and winning ride of the frames and bikes, not to mention the new 2012 colors and graphics. EYE and AVE continue to refine the frame and parts. And last, but not least, ITS introduces 120 tpi casings. We also continue to support the best racers in the world. As we put this catalog together, Marc Willers is the World Number One and leads the ABA Pro points. Since joining the Factory Speed team in 2011, Marc has has had the best year of his career, winning more than a dozen races, including two UCI World Cup Supercross races. Factory Intense pros David Herman and Arielle Martin also continue to make their way onto ABA and international podiums. Speed, Intense, Sinz Elite, THE and ITS riders took far too many World Championship medals to list here, but here are a few highlights: Marian Pajon rode her Speed to the Women’s Elite World Championships; Melinda McLeod picked up double Junior Elite World Championships on her Intense; Felicia Stancil doubled while Ryan Pettigrew picked up a gold—both on Speeds and Marc Willers grabbed a bronze. Besides these world beaters, we also sponsor a massive number of U.S. and international riders and teams. Among them are J&R-Speed, Rennen-Intense, Factory Free Agent, Factory Crupi, ONE-Kenda, Intense Europe and many, many more. In freestyle, EYE/AVE riders Cody McKenna, Chris Bracamonte and Eric Hough have been making big names for themselves this past year. VSI is committed to developing, producing and selling the best BMX and mountain biking components, frames, bikes and protective gear. We do this because we live it and love it. And we thank you for your support as we work hard to be even better at what we do.
Contents
10-16 FramesIntense, Speed, EYE
27-29 Protective GearGloves, Elbow Guards, Knee & Shin Guards, Youth Guards and Socks
17-25 HelmetsFull Face Carbon/Composite/ABS,/Youth, Cross Country, Road, Youth, Toddler and Bucket
33-39 SteeringForks, Stems, Handlebars, Grips, Headsets and Stem Locks
31-32 Active ApparelSport Jersey, Race Jersey, F-1 Technical Shorts
4 Team BikesIntense, Speed
5-8 Intense Complete BikesFactory, Race
51-52 BrakingBrake Combos, Brakes, Levers, Pads, Cables and Post Extensions
40-42 WheelsSinz Elite 20-Mil, SINZ Elite iHub Wheels, Sinz Cassette Wheels, Eye Logo Wheels and Axle Nuts
56 PedalingClipless Pedals, Platform Pedals and Cleats
57-58 Fenders and ShroudsFront and Rear Fenders, Shrouds and Mud Guards
53-54 SaddleBMX Saddles, MTB Saddles, Seat Post Saddle Combos, Seat Posts and Seat Clamps
61 Intense Tires Models & Sizing ChartTHE & SINZ
60 Pad SetsPad Systems and Monocoque Pads
60 Bike StandsThe and SINZ
59 Numbers and KitsMini and Pro Number Plates, Background Kits, Number Packs and Batwings
62-63BMX TyresMK2, MicroKnobby and Hustler
65 TubesUltra Lightweight Tubes
43-49 Drive TrainCranks, Bottom Brackets, Chains, Chainrings, Cogs, Chainring Bolts and Chain Tensioners
TiresSystem1, 2, 3, 4, 5, 29, Invader, Edge, 909, Intruder, Spike and MK2
65-66 Casual ApparelT-Shirts, Hats and Hoddies
67-68 Parts Chart - Complete BikesIntense
69 Shipping Rates
70 Warranty, Address, Shopatron
64
Custom Team Bikes
4
We offer custom bikes built to your personal specifications. Just pick a Podium, Podium XLT or Speed M-Series frame in the color and size of your choice, then choose from among a long list of the best Sinz Elite, Sinz, THE and ITS components. The complete parts kit is shipped to the store where you can build the bike or simply turn the parts over to the customer.
Factory Bikes
The Intense Factory Bike line-up is as close to a pro-level bike as you can get without spending pro-level money. Like our Team Bikes, each Factory model is built around a hydro-formed, 6061 aluminum-alloy frame and spec’d with a selection of quality Sinz components and ITS tyres. Factory bikes come with THE Pivotal saddles on the Pro models and Sinz Mini saddles on the smaller bikes, Sinz Elite Stealth Carbon Fiber fork, Sinz Sealed headset, handlebars, stem,Sticky Grips and wheels and ITS MK2 tyres round out the component spec. Available in six 20-inch and one 24-inch sizes with in a sleek Silver Sheen finish. Gold and Red Metallic paint color carry over.
*See specs and parts for theses bikes on page 67
Part# Model ColorIBK1FMN-1 Mini Gold
IBK1FMN-2 Mini Red
IBK1FJ-1 Junior Gold
IBK1FJ-2 Junior Red
IBK2FEX-1 Expert Silver Sheen
IBK1FE-1 Expert Gold
IBK1FE-2 Expert Red
IBK2FP-1 Pro Silver Sheen
IBK1FP-1 Pro Gold
IBK1FP-2 Pro Red
IBK2FPX-1 Pro XL Silver Sheen
IBK1FPX-1 Pro XL Gold
IBK1FPX-2 Pro XL Red
IBK2FPXX-1 Pro XXL Silver Sheen
IBK1FPXX-1 Pro XXL Gold
IBK1FPXX-2 Pro XXL Red
IBK2FPC-1 Cruiser Silver Sheen
IBK1FPC-1 Cruiser Gold
IBK1FPC-2 Cruiser Red
*All bike and parts specifications are subject to change without notice. Items listed in the spec sheet may be substituted for similar products at any time.
NEW
5
6
One of the best values in BMX racing, the Intense Race line is built around a hydro-formed, 6061 aluminum-alloy frame that features our proven and perfected geometry. Each of the six 20-inch and one 24-inch models is spec’d with quality Sinz components and ITS tyres. What do you get on a Race bike? How about a Sinz Chromoly Race fork, handlebars, stem, chromoly cranks with a sealed-bearing bottom bracket, Sticky Grips and wheels and ITS MK2 tyres. Available in Team Blue or Charcoal. Black and Purple colors carry over.
Part# Model ColorIBK1RMN-1 Mini Black
IBK1RMN-2 Mini Purple
IBK2RMN-1 Mini Charcoal
IBK2RMN-2 Mini Team Blue
IBK1RMX-1 Mini XL Black
IBK1RMX-2 Mini XL Purple
IBK2RMX-1 Mini XL Charcoal
IBK2RMX-2 Mini XL Team Blue
IBK1RJX-1 Junior XL Black
IBK1RJX-2 Junior XL Purple
IBK2RJX-1 Junior XL Charcoal
IBK2RJX-2 Junior XL Team Blue
IBK1REX-1 Expert XL Black
IBK1REX-2 Expert XL Purple
Part# Model ColorIBK2REX-1 Expert XL Charcoal
IBK2REX-2 Expert XL Team Blue
IBK1RP-1 Pro Black
IBK1RP-2 Pro Purple
IBK2RP-1 Pro Charcoal
IBK2RP-2 Pro Team Blue
IBK1RPX-1 Pro XL Black
IBK1RPX-2 Pro XL Purple
IBK2RPX-1 Pro XL Charcoal
IBK2RPX-2 Pro XL Team Blue
IBK1RPC-1 Pro Cruiser Black
IBK1REC-2 Pro Cruiser Purple
IBK2REC-1 Pro Cruiser Charcoal
IBK2REC-2 Pro Cruiser Team Blue
NEWRace Bikes
*All bike and parts specifications are subject to change without notice. Items listed in the spec sheet may be substituted for similar products at any time.7
*See specs and parts for theses bikes on page 67
8
The Intense Podium frame has won the ABA Bike of the Year award and more National Number 1 titles and World Cham-pionships—two in 2011—than any other for one simple reason, it’s the best frame you can buy. And, now, it’s even lighter weight.
NEWFrames
Stinger Series
Gun Metal Grey Yellow
Race Series
Black Red Blue Orange
LTD Series
Chrome/Red
XLT Series
White/Red Black/Team Blue
Available Colors
Podium XLT The Intense Podium XLT frames feature a totally re-engineered, ultra-lightweight, hydro-formed tube set and exclusive 10/20-millimeter compatible iHub dropouts. The new tubing means a drop in weight of between 6 and 8 ounces, but with the same amazing ride the Podium is known for. The frames also feature an integrated head tube, CNC-machined dropouts and low stand over heights and come with 10- and 20-millimeter, CNC-machined, alloy chain tensioner blocks. Available in 15 sizes and two color schemes—Pearl White/Red or Black/Team Blue.
10
INTENSE FRAME SIZING CHART and WEIGHTSSize/Color Part# Top Tube Headset Chain Stay Head Tube Seat Post Seat Angle B/B Height Weight
Mini
Black IP0M-BK 16.5” 1” 13” 110mm 22.2mm 70˚ 10.5” 1190 grams
Blue IP0M-BL 16.5” 1” 13” 110mm 22.2mm 70˚ 10.5” 1190 grams
Orange IP0M-OR 16.5” 1” 13” 110mm 22.2mm 70˚ 10.5” 1190 grams
Red IP0M-RD 16.5” 1” 13” 110mm 22.2mm 70˚ 10.5” 1190 grams
Yellow IP0M-YL 16.5” 1” 13” 110mm 22.2mm 70˚ 10.5” 1190 grams
Gun Metal Grey IP0M-GM 16.5” 1” 13” 110mm 22.2mm 70˚ 10.5” 1190 grams
Mini XL
Black IP0MX-BK 17.25” 1” 13” 110mm 22.2mm 70˚ 10.5˚ 1219 grams
Blue IP0MX-BL 17.25” 1” 13” 110mm 22.2mm 70˚ 10.5” 1219 grams
Orange IP0MX-OR 17.25” 1” 13” 110mm 22.2mm 70˚ 10.5” 1219 grams
Red IP0MX-RD 17.25” 1” 13” 110mm 22.2mm 70˚ 10.5” 1219 grams
Yellow IP0MX-YL 17.25” 1” 13” 110mm 22.2mm 70˚ 10.5” 1219 grams
Gun Metal Grey IP0MX-GM 17.25” 1” 13” 110mm 22.2mm 70˚ 10.5” 1219 grams
Junior
Black IP0J-BK 18” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1247 grams
Blue IP0J-BL 18” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1247 grams
Orange IP0J-OR 18” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1247 grams
Red IP0J-RD 18” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1247 grams
Junior XL
Black IP0JX-BK 18.75” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1276 grams
Blue IP0JX-BL 18.75” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1276 grams
Orange IP0JX-OR 18.75” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1276 grams
Red IP0JX-RD 18.75” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1276 grams
Yellow IP0JX-YL 18.75” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1276 grams
Gun Metal Grey IP0JX-GM 18.75” 1” 13.5” 115mm 22.2mm 70˚ 10.6” 1276 grams
Expert
Black IP0E-BK 19.5” 1” 13.75” 120mm 22.2mm 70˚ 11” 1332 grams
Blue IP0E-BL 19.5” 1” 13.75” 120mm 22.2mm 70˚ 11” 1332 grams
Orange IP0E-OR 19.5” 1” 13.75” 120mm 22.2mm 70˚ 11” 1332 grams
Red IP0E-RD 19.5” 1” 13.75” 120mm 22.2mm 70˚ 11” 1332 grams
Yellow IP0E-YL 19.5” 1” 13.75” 120mm 22.2mm 70˚ 11” 1332 grams
Gun Metal Grey IP0E-GM 19.5” 1” 13.75” 120mm 22.2mm 70˚ 11” 1332 grams
Expert XL
Black IP0EX-BK 20” 1 1/8” 13.5” 120mm 22.2mm 70˚ 11” 1360 grams
Blue IP0EX-BL 20” 1 1/8” 13.5” 120mm 22.2mm 70˚ 11” 1360 grams
Orange IP0EX-OR 20” 1 1/8” 13.5” 120mm 22.2mm 70˚ 11” 1360 grams
Red IP0EX-RD 20” 1 1/8” 13.5” 120mm 22.2mm 70˚ 11” 1360 grams
Junior Pro
Black IP0JP-BK 21.5” 1 1/8” 14” 120mm 27.2mm 68˚ 11.25” 1786 grams
Blue IP0JP-BL 21.5” 1 1/8” 14” 120mm 27.2mm 68˚ 11.25” 1786 grams
Orange IP0JP-OR 21.5” 1 1/8” 14” 120mm 27.2mm 68˚ 11.25” 1786 grams
Red IP0JP-RD 21.5” 1 1/8” 14” 120mm 27.2mm 68˚ 11.25” 1786 grams
Yellow IP0JP-YL 21.5” 1 1/8” 14” 120mm 27.2mm 68˚ 11.25” 1786 grams
Gun Metal Grey IP0JP-GM 21.5” 1 1/8” 14” 120mm 27.2mm 68˚ 11.25” 1786 grams
Pro
Chrome LTD IPRC1P-CR 20.5” 1 1/8” 14.5” 120mm 27.2mm 72˚ 11.5” 1460 grams
Black/Team Blue IPRC2P-BK 20.5” 1 1/8” 14.5” 120mm 27.2mm 72˚ 11.5” 1460 grams
White/Red IPRC2P-WH 20.5” 1 1/8” 14.5” 120mm 27.2mm 72˚ 11.5” 1460 grams
Pro XL
Yellow IP0PX-YL 21” 1 1/8” 14.5” 120mm 27.2mm 72˚ 11.5” 1687 grams
Chrome LTD IPRC1PX-CR 21” 1 1/8” 14.5” 120mm 27.2mm 72˚ 11.5” 1480 grams
Black/Team Blue IPRC2PX-BK 21” 1 1/8” 14.5” 120mm 27.2mm 72˚ 11.5” 1480 grams
White/Red IPRC2PX-WH 21” 1 1/8” 14.5” 120mm 27.2mm 72˚ 11.5” 1480 grams
Pro XL+
Orange IP0PXP-OR 21.25” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1701 grams
Red IP0PXP-RD 21.25” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1701 grams
Yellow IP0PXP-YL 21.25” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1701 grams
11
INTENSE FRAME SIZING CHART and WEIGHTSSize/Color Part# Top Tube Headset Chain Stay Head Tube Seat Post Seat Angle B/B Height Weight
Gun Metal Grey IP0PXP-GM 21.25” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1701 grams
Chrome LTD IPRC1PXP-CR 21.25” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1460 grams
Black/Team Blue IPRC2PXP-BK 21.25” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1460 grams
White/Red IPRC2PXP-WH 21.25” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1460 grams
Pro XXL
Orange IP0PXX-OR 21.5” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1701 grams
Yellow IP0PXX-YL 21.5” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1701 grams
Chrome LTD IPRC1PXX-CR 21.5” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1480 grams
Black/Team Blue IPRC2PXX-BK 21.5” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1480 grams
White/Red IPRC2PXX-WH 21.5” 1 1/8” 14.8” 120mm 27.2mm 72˚ 11.5” 1480 grams
Junior Cruiser
Blue IP0JC-BL 18.5” 1” 15” 115mm 22.2mm 69˚ 11.1” 1332 grams
Expert Cruiser
Black IP0EC-BK 20.5” 1” 13.5” 120mm 22.2mm 70˚ 11” 1644 grams
Blue IP0EC-BL 20.5” 1” 13.5” 120mm 22.2mm 70˚ 11” 1644 grams
Orange IP0EC-OR 20.5” 1” 13.5” 120mm 22.2mm 70˚ 11” 1644 grams
Red IP0EC-RD 20.5” 1” 13.5” 120mm 22.2mm 70˚ 11” 1644 grams
Yellow IP0EC-YL 20.5” 1” 13.5” 120mm 22.2mm 70˚ 11” 1644 grams
Gun Metal Grey IP0EC-GM 20.5” 1” 13.5” 120mm 22.2mm 70˚ 11” 1644 grams
Pro Cruiser
Blue IP0PC-BL 21” 1 1/8” 15” 120mm 27.2mm 69˚ 12” 1701 grams
Red IP0PC-RD 21” 1 1/8” 15” 120mm 27.2mm 69˚ 12” 1701 grams
Yellow IP0PC-YL 21” 1 1/8” 15” 120mm 27.2mm 69˚ 12” 1701 grams
Chrome LTD IPRC1PC-CR 21” 1 1/8” 15” 120mm 27.2mm 69˚ 12” 1480 grams
Black/Team Blue IPRC2PC-BK 21” 1 1/8” 15” 120mm 27.2mm 69˚ 12” 1480 grams
White/Red IPRC2PC-WH 21” 1 1/8” 15” 120mm 27.2mm 69˚ 12” 1480 grams
Pro Cruiser +
Blue IP0PCP-BL 21.5” 1 1/8” 15.5” 120mm 27.2mm 69˚ 12” 1729 grams
Red IP0PCP-RD 21.5” 1 1/8” 15.5” 120mm 27.2mm 69˚ 12” 1729 grams
Chrome LTD IPRC1PCP-CR 21.5” 1 1/8” 15.5” 120mm 27.2mm 69˚ 12” 1500 grams
Black/Blue IPRC2PCP-BK 21.5” 1 1/8” 15.5” 120mm 27.2mm 69˚ 12” 1500 grams
Black/Team Blue IPRC2PCP-WH 21.5” 1 1/8” 15.5” 120mm 27.2mm 69˚ 12” 1500 grams
12
pho
to b
y: J
ason
Kre
nik
Frames
Speed M-Series frames are the new standard in fast frame design. Ridden by the world’s fastest elite BMX racers Marc Willers and 2011 World Champion Mariana Pajon, they are proven winners. Pair up one of these beauties with a Sinz Elite 20-Mil Carbon Pro CFC fork and Sinz Elite 20-Mil iHub wheel sets and you’ll have the most-efficient pedaling BMX bike available. Just watch how fast Marc gets down the first straight. That’s the 20-mil Speed in action—Just Plain Fast.
Speed M-Series XLT The new Speed M-Series XLT frames are the backbone of what may be the fastest BMX bike design ever offered, but at around a half pound lighter than the original M-Series frames. The weight loss comes from a new tube set. Each tube was meticulously engineered to be lighter weight, yet retain strength and rigidity where needed. An M-Series Limited 533 frame weighs in at 3.5 pounds. All Speed frames include chain tensioner blocks that make them compatible with standard as well as Sinz Elite 20-Mil iHub rear wheels. Available in four 20-inch and two 24-inch cruiser sizes and two colors—New Zealand Black/White or White/Black with a hint of gold.
About the Blocks The unique rear dropouts on all Intense and Speed frames offer versatility no other frames can claim. Every frame comes with two sets of custom, proprietary, rear dropout Blocks. The forged and precision CNC-machined Blocks allow you to run either standard 10-millimeter axle wheels or the stiffer and better-handling Sinz Elite 20-millimeter through-axle wheels. Use the 10-millimeter blocks and run any standard wheel set, or, if you prefer better gate snaps, a more powerful and efficient pull down the first straight and better handling, upgrade your wheels to the Sinz Elite 20-millimeter iHub wheels and use the 20-millimeter Blocks. Both 10- and 20-millimeter Blocks are also available separately. They come in black anodized only.
Red/Black
Available Colors
Black/RedBlack/White White/Black
NEW
13
SPEED FRAME SIZING CHART and WEIGHTSSize/Color Part# Top Tube Down Tube Chain
StayHead Tube
Head Angle
Seat Post Angle
B/B Height Wheel Size Weight
M 438
Red/Black SP0MX-RB 17.25” 18.73” 13” 110mm 72˚ 70˚ 10.5” 20” x 1 1/8” 1358 grams
M 476
Red/Black SP0JX-RB 17.75” 20” 13.5” 115mm 73˚ 70˚ 10.6˚ 20” x 1 1/8” 1419 grams
M 508
Red/Black SP0EX-RB 20” 20.86” 13.5” 120mm 73˚ 70˚ 11” 20” x 1 1/8” 1562 grams
Red/Black 10-20mm SRC1EX-RB 20” 20.86” 13.5” 120mm 73˚ 70˚ 11” 20” x 1 1/8” 1227 grams
M 520
Red/Black 10-20mm SRC1P-1 20.5” 21.44” 14.5” 120mm 74˚ 72˚ 11.5” 20” 1460 grams
Black/Red 10-20mm SRC2P-1 20.5” 21.44” 14.5” 120mm 74˚ 72˚ 11.5” 20” 1460 grams
Black/White 10-20mm SRC2P-BK 20.5” 21.44” 14.5” 120mm 74˚ 72˚ 11.5” 20” 1460 grams
White/Black 10-20mm SRC2P-WH 20.5” 21.44” 14.5” 120mm 74˚ 72˚ 11.5” 20” 1460 grams
M 533
Red/Black 10-20mm SRC1PX-1 21” 21.86” 14.5” 120mm 74˚ 72˚ 11.5” 20” 1460 grams
Black/Red 10-20mm SRC2PX-1 21” 21.86” 14.5” 120mm 74˚ 72˚ 11.5” 20” 1460 grams
Black/White 10-20mm SRC2PX-BK 21” 21.86” 14.5” 120mm 74˚ 72˚ 11.5” 20” 1460 grams
White/Black 10-20mm SRC2PX-WH 21” 21.86” 14.5” 120mm 74˚ 72˚ 11.5” 20” 1460 grams
M 546
Red/Black 10-20mm SRC1PXX-1 21.5” 22.30” 14.8” 120mm 74˚ 72˚ 11.5” 20” 1500 grams
Black/Red 10-20mm SRC2PXX-1 21.5” 22.30” 14.8” 120mm 74˚ 72˚ 11.5” 20” 1500 grams
Black/White 10-20mm SRC2PXX-BK 21.5” 22.30” 14.8” 120mm 74˚ 72˚ 11.5” 20” 1500 grams
White/Black 10-20mm SRC2PXX-WH 21.5” 22.30” 14.8” 120mm 74˚ 72˚ 11.5” 20” 1500 grams
M 534
Black/Red 10-20mm SRC1PC-1 21” 22.69” 15” 120mm 73˚ 69˚ 12” 24” 1440 grams
Black/Red 10-20mm SRC2PC-1 21” 22.69” 15” 120mm 73˚ 69˚ 12” 24” 1440 grams
Black/White 10-20mm SRC2PC-BK 21” 22.69” 15” 120mm 73˚ 69˚ 12” 24” 1440 grams
White/Black 10-20mm SRC2PC-WH 21” 22.69” 15” 120mm 73˚ 69˚ 12” 24” 1440 grams
M547
Black/Red 10-20mm SRC1PCP-1 21.5” 26.69” 15.5” 120mm 73˚ 69˚ 12” 24” 1500 grams
Black/White 10-20mm SRC2PCP-BK 21.5” 26.69” 15.5” 120mm 73˚ 69˚ 12” 24” 1500 grams
White/Black 10-20mm SRC2PCP-WH 21.5” 26.69” 15.5” 120mm 73˚ 69˚ 12” 24” 1500 grams
14
pho
to b
y: M
ark
Lee-
Sing
Q2 Frames Made in Los Angeles using the highest aerospace-grade, heat-treated, 4130-chromoly tubing, the super-low-profile frame comes in three sizes to fit just about any rider. Rider tested with proven geometry the EYE Q is for modern freestylers who need a lightweight and versatile frame that’s equally good for street, dirt, vert or park riding. The eye-shaped cut-out on the head tube acts as a venting hole, allowing heat to escape during welding and the heat-treating process thereby ensuring a super-strong frame. The eye-hole also eliminates unnecessary weight, as do large vent holes throughout the frame, removable brake studs, cable bosses and gyro tabs and the lack of a seat clamp. A large 21.25-inch frame weighs just 4 pounds 9 ounces. It’s all about the details. EYE Q2s all have Mid bottom bracket shells, integrated head tubes, 14-millimeter CNC-machined dropouts and 990 brake positioning on the seat stays. Each frame includes a one-year warranty against manufacturer’s defects and a crash replacement policy. Frame sizes include 20.5-, 21- and 21.25-inch top tubes with 13.5- or 14-inch chain stays and 11.5-inch bottom bracket heights. The head and seat tube angles are 74.5 degrees (75 on the 21.25) and 71 degrees respectively.
15
EYE FRAME SIZING CHART and WEIGHTSSize/Color Part# Top Tube Seat Tube Chain Stay Head Tube Head Angle Seat Post Angle B/B Height Weight
EYE Q
Black EFRM0-205BK 20.5” 8.5” 13.5”-14” 110mm 74.5 ˚ 71˚ 11.5” 4.9lbs
Black EFRM0-21BK 21” 8.5” 13.5”-14” 110mm 74.5 ˚ 71˚ 11.5” 4.9lbs
Black EFRM0-2125BK 21.25” 8.5” 13.5”-14” 110mm 75 ˚ 71˚ 11.5” 4.10lbs
Raw EFRM0-205C 20.5” 8.5” 13.5”-14” 110mm 74.5 ˚ 71˚ 11.5” 4.9lbs
Raw EFRM0-21BK 21” 8.5” 13.5”-14” 110mm 74.5 ˚ 71˚ 11.5” 4.9lbs
Raw EFRM0-2125BK 21.25” 8.5” 13.5”-14” 110mm 75 ˚ 71˚ 11.5” 4.10lbs
photo by: Kai Kuusisto
16
THE Point 5
THE borrowed many of the best attributes of its super-successful THE ONE helmet and put them in the new Point 5. The Point 5 is a price-point full-face helmet suitable for BMX, mountain biking, snowboarding and other non-motorized action sports. It features the same shape and profile as the popular ONE helmet, but it’s made with an injection-molded ABS shell. Weighing in at only 1,200 grams (2 pounds 6 ounces) they are CPSC and CE approved for cycling and come in XS through XXL adult sizes
Back Bone Icon Grey Icon Red
Current
NEW
19
pho
to b
y: J
erry
Lan
dru
m
26
THE Skinz & Bones
Part# Sizing ColorTSKB-1-5 XS (4/5) Black
TSKB-1-6 SM (6/7) Black
TSKB-1-7 MD (8/9) Black
TSKB-1-8 LG (10) Black
TSKB-1-9 XL (11/12) Black
TSKW-1-5 XS (4/5) White
TSKW-1-6 SM (6/7) White
TSKW-1-7 MD (8/9) White
TSKW-1-8 LG (10) White
TSKW-1-9 XL (11/12) White
Bones gloves provide a super comfy fit without extra frills. They have ultra-suede palms, lightweight vented backs and soft terry-cloth thumbs. A reinforced pad on the inner thumbs provides extra grip and extends the life of the gloves. Grippy silicone graphics on the index and middle fingers provide additional brake and shift lever control. Bold silk-screened THE logos and finger graphics add style.
Part# Sizing ColorTSOK-01 Short (8-12) Black
TSOK-02 Short (4-8) Black
TSOK-03 Short (8-12) White
TSOK-04 Short (4-8) White
TSOK-05 Long (8-12) Black
TSOK-06 Long (4-8) Black
TSOK-07 Long (8-12) White
TSOK-08 Long (4-8) White
THE Socks
F1 Gloves
Part# Sizing ColorTSKB-1-5 XS Black
TSKB-1-5 SM Black
TSKB-1-5 MD Black
TSKB-1-5 LG Black
TSKB-1-5 XL Black
TSKW-1-5 XS White
TSKW-1-5 SM White
TSKW-1-5 MD White
TSKW-1-5 LG White
TSKW-1-5 XL White
Golf Skinz gloves are anatomically shaped for a perfect fit. A long-finger glove, they feature super grippy ultra-suede palms, lightweight Aeroprene padded backs, hook-and-look adjustable straps, terry cloth nose wipes and stretch nylon venting at the knuckles. Silk screened THE logos and contrasting piping and stitching add style.
Designed for comfort THE socks are breathable and wick away sweat. They have a built in arch support. Available in four sizes, the thin material feels like you’re not wearing socks.
NEW
27
THE Elbow GuardsTHE Elbow Guards
THE Knee and Shin Guards
THE 2PC Slip-Fit Knee and Shin Guards
Part# Sizing ColorTEFG-0-6/7 SM/MD Black
TEFG-0-8/9 LG/XL Black
F-1 Elbow/Forearm Guards are available in two sizes, each with size-specific polyethylene armor plates for protection from hard pointy objects. Breathable, anatomically shaped, Aeroprene padding and three hook-and-loop straps keep the guards comfortably and securely in place. They are machine washable and CE-approved.
Part# Sizing ColorTKSG-0-6/7 SM/MD Black
TKSG-0-8/9 LG/XL Black
The one-piece slip-on design of the F-1 Storm Sock-Fit Knee and Shin Guards have made them a favorite among the worlds top BMX and downhill mountain bike racers. A soft, breathable Aeroprene sock and four hook-and-loop straps keep them securely in place. Durable polyethylene armor offers protection from rocks, pavement and pedals while the thick Aeroprene sock provides shock-protection and comfort. They are machine washable and come in S/M and L/XL.
Part# Sizing ColorT2PC-0-6/7 SM/MD Black
T2PC-0-8/9 LG/XL Black
The CE-approved THE F-1 Storm Knee and Shin Guards feature a two-piece system that allows the rider to use the anatomically shaped knee and shin guards together or separately. Four hook-and-loop straps keep them securely in place when in use, but also allow riders to put them on and take them off with ease. The durable polyethylene armor offer protection from rocks, pavement and pedals while soft, breathable Aeroprene padding provides shock-protection and comfort. They are machine washable and come in two sizes, S/M and L/XL.
28
NEW
THE Youth Guards
Part# Sizing ColorTKNE-0-1 SM Black
TKNE-0-2 MD Black
TKNE-0-3 LG Black
TKNE-0-4 XL Black
F-1 Storm Youth Knee/Elbow Guards offer kids tailored fitted protection. Designed to work as either knee or elbow pads, they are available in four sizes and feature easy-to-use, slip-on adjustable elastic straps with hook-and-loop closures. The caps are sewn to an ultra-soft foam base to ensure comfort and a superb fit.
SOFT PADS
Part# Sizing ColorTEGS-2-6-7 SM/MD Black
TEGS-2-8-9 LG/XL Black
THE Soft Knee Pads Tested all race season by Arielle Martin, these new pads offer knee protection in a comfortable, lightweight and well-ventilated package. Features include shock-absorbing honey combed proprietary material wrapped in durable Aeroprene.
THE Soft Elbow Pads Like the Soft Knee pads, these elbow pads offer comfortable protection in a lightweight and well-ventilated package. Features include a proprietary shock-absorbing honey-comb material wrapped in durable Aeroprene.
THE Knee Pads
Part# Sizing ModelTKGH-2-6-7 SM/MD Hard Shell
TKGH-2-8-9 LG/XL Hard Shell
TKGS-2-6-7 SM/MD Soft Shell
TKGS-2-8-9 LG/XL Soft Shell
A hard-shell cup fitted between layers of Cordura and Aeroprene give these pads a level of comfort and protection that falls between the Soft and F1 Storm pads.
NEW
NEW
29
Sport Jersey
Part# Sizing ColorTSJBL-0-5 XS Blue
TSJBL-0-6 SM Blue
TSJBL-0-7 MD Blue
TSJBL-0-8 LG Blue
TSJBL-0-9 XL Blue
TSJBL-0-10 XXL Blue
TSJR-0-5 XS Red
TSJR-0-6 SM Red
TSJR-0-7 MD Red
TSJR-0-8 LG Red
TSJR-0-9 XL Red
TSJR-0-10 XXL Red
TSJW-0-5 XS White
TSJW-0-6 SM White
TSJW-0-7 MD White
TSJW-0-8 LG White
TSJW-0-9 XL White
TSJW-0-10 XXL White
Our THE Sport Jersey hits a lower-price point than the F-1 Technical jersey, but is still chock full of techy features. Among them are full-length front, rear and sleeve venting, forearm and elbow padding, fitted ribbed cuffs and sublimated THE graphics. They are available in white/black, red/white or blue/white and in sizes extra small through extra large.
Jersey
Part# Sizing ColorSPJA-2-SM SM Red/Yellow
SPJA-2-MD MD Red/Yellow
SPJA-2-LG LG Red/Yellow
SPJA-2-XL XL Red/Yellow
SPJA-2-XXL XXL Red/Yellow
Now, you can represent Speed on the track and do so looking like a pro with the new Speed Racing Jersey from THE and Speed. The jerseys are made from durable polyester and feature sublimated Factory Speed-inspired graphics. Sizes include adult small, medium, large, XL and XXL.
New
pho
to b
y: J
erry
Lan
dru
m
31
F1 Race Shorts
Part# Sizing ColorTRS-2-30WH 30 Black/White
TRS-2-32WH 32 Black/White
TRS-2-34WH 34 Black/White
TRS-2-36WH 36 Black/White
TRS-2-38WH 38 Black/White
TRS-2-30RD 30 Black/Red
TRS-2-32RD 32 Black/Red
TRS-2-34RD 34 Black/Red
TRS-2-36RD 36 Black/Red
TRS-2-38RD 38 Black/Red
TRS-2-30BL 30 Black/Blue Yellow
TRS-2-32BL 32 Black/Blue Yellow
TRS-2-34BL 34 Black/Blue Yellow
TRS-2-36BL 36 Black/Blue Yellow
TRS-2-38BL 38 Black/Blue Yellow
Our new race shorts have been totally redesigned for 2012. Suitable for BMX racing or casual to extreme mountain biking, they feature redesigned patterns for improved fit and comfort. Made with a mix of durable Cordura and polyester, they are built to last. Features include a zippered key pocket, flex ribbing in the hip crotch area with silk-screened THE logos. Available in black/red, black/blue/yellow and black/white in S to XXL sizes.
New
Jerseys
Part# Sizing ColorIBJ-0-0 Youth XS Red/Black
IBJ-0-1 Youth SM Red/Black
IBJ-0-2 Youth MD Red/Black
IBJ-0-3 Youth LG Red/Black
IBJ-0-5 Adult XS Red/Black
IBJ-0-6 Adult SM Red/Black
IBJ-0-7 Adult MD Red/Black
IBJ-0-8 Adult LG Red/Black
IBJ-0-9 Adult XL Red/Black
IBJ-0-10 Adult XXL Red/Black
Intense jerseys feature custom-designed fully sublimated graphics on durable, lightweight, wicking material. Padded elbows provide a measure of protection. They are perfect for BMX racing and hanging out in the pits. Heck, you can even wear it to school. They come in 10 youth and adult sizes.
32
Stealth Carbon Fiber Race Forks
Part# Sizing Weight Rider Limit
SSF110-20 20”x 1 1/8” Pro CFC 10mm 612 grams 195 lbs
SSF110-24 24”x 1 1/8” Pro CFC 10mm 610 grams 195 lbs
SSF020-20 20”x 1 1/8” Pro 20mm 606 grams 195 lbs
SSF020-24 24”x 1 1/8” Pro 20mm 620 grams 195 lbs
SSF0-05 20”x 1” Expert 490 grams 145 lbs
SSF0-06 24”x 1” Expert 495 grams 145 lbs
SSF0-07 20”x 1 1/8” Pro Lite 550 grams 175 lbs
SSF0-08 24”x 1 1/8” Pro Lite 570 grams 175 lbs
SSF0-09 20”x 1” Mini 386 grams 105 lbs
SSF0-10 24”x 1” Mini 394 grams 105 lbs
Sinz Elite carbon fiber forks are the winningest carbon-fiber BMX forks of all time. Just this past summer, riders using Sinz Elite Carbon Pro forks occupied 12 of the 18 Elite podium spots at the BMX World Championships in Copenhagen. The World’s top team and riders have ridden them since their introduction because they are lightweight, stiff and reliable. Among those who choose them are Marc Willers, David Herman and Maris Strombergs. New for 2012 are lightweight Carbon Pro CFC forks and a full range of exclusive 20-Mil forks.
Sinz Elite Carbon CFC Forks Available with chromoly and aluminum steerer tubes with 10- and 20-millimeter dropouts in 20- and 24-inch sizes, they are perhaps the most technologically advanced BMX forks available today. They are strong, reliable and lightweight. All models have a full carbon fiber monocoque crown and leg design. The four models include the Pro CFC, Pro Lite, Expert and Mini.
Pro CFC (Chromoly Steerer) • Steer Tube: 1 1/8” X 180 mm Chromoly • Offset: 32.2 mm • Length: 313 mm (20”) 364 mm (24”)
Pro Lite (Aluminum Steerer) • Steer Tube: 1 1/8” X 180 mm 7000 Series Aluminum • Offset: 32.2 mm • Length: 313 mm (20”) 364 mm (24”)
Expert (Aluminum Steerer) • Steer Tube: 1 1/8” X 180 mm 7000 Series Aluminum • Offset: 32.2 mm • Length: 313 mm (20”) 364 mm (24”)
Mini (Aluminum Steerer) • Steer Tube: 1 1/8” X 180 mm 7000 Series Aluminum • Offset: 32.2 mm • Length: 313 mm (20”) 364 mm (24”)
AlloySteerer Tube
Carbon Fiber
Crown
*Sinz Elite lightweight aluminum steerer tubes are designed to bend not break under extreme impacts. To learn more about the Sinz crash replacement program, contact your local dealer.
New
33
SINZ Stealth Aluminum Race Forks Sinz Aluminum forks are the most technologically advanced of their kind. They offer a perfect blend of strength, weight and style for larger riders. Available in 20- and 24-inch models. Not recommended for riders who weigh more than 275 pounds.
Part# Sizing Weight Rider LimitSSF0-03 20”x 1 1/8” 960 grams 275 lbs
SSF0-04 24”x 1 1/8” 990 grams 275 lbs
• Steerer Tube: 1 1/8” X 180mm Chromoly• Offset: 32.2mm• Length: 313mm (20”) 364mm (24”)
SINZ 4130 Chromoly Fork Sinz 4130-chromoly forks are post heat treated for maximum strength. They have laser-cut dropouts and 180-millimeter steer tubes. Wheel-centering washers are provided.
Part# Sizing WeightSFK-01 20”x 1” 680 grams
SFK-02 24”x 1” 795 grams
SFK-03 20”x 1 1/8” 870 grams
SFK-04 24”x 1 1/8” 870 grams
SINZ Pro Lite Stems
The first front-loading, hollow-forged stem made for BMX, Sinz Pro Lite stems are some of the lightest and strongest BMX stems available. Gram for gram, hollow forging results in a stronger and more reliable stem than CNC-machined stems . Pro Lite stems fit 1 1/8-inch steerer tubes, come in 50- or 55-millimeter lengths and are available in four colors.Part# Sizing Color WeightSLS-03 50mm Black 285 grams
SLS-04 55mm Black 295 grams
SLS-03W 50mm White 285 grams
SLS-04W 55mm White 295 grams
SLS-03R 50mm Red 285 grams
SLS-04R 55mm Red 295 grams
SLS-03B 50mm Blue 285 grams
SLS-04B 55mm Blue 295 grams
SINZ Mini Lite Stems
Sinz Mini Lite stems are hollow-forged for superior strength, reliability and low weight. The smaller stems fit 1-inch steerer tubes, come in 40- and 45-millimeter lengths and four colors.
Part# Sizing Color WeightSLS-01 40mm Black 210 grams
SLS-02 45mm Black 220 grams
SLS-01W 40mm White 210 grams
SLS-02W 45mm White 220 grams
SLS-01R 40mm Red 210 grams
SLS-02R 45mm Red 220 grams
SLS-01B 40mm Blue 210 grams
SLS-02B 45mm Blue 220 grams
34
Sinz Elite Carbon Fiber Bars
Part# Sizing Weight Rise Rider Limit Back Sweep Up Sweep WidthSECH-MN Mini 152 grams 3” 100lbs 2 6 21”
SECH-JR Junior 164 grams 4.5” 115lbs 2 6 23.5”
SECH-EX Expert 210 grams 6” 135lbs 2 6 26”
Sinz Elite Stealth handlebars are the lightest-weight, carbon-fiber handlebars designed specifically for BMX racing. Available in three sizes—Mini, Junior and Expert—they feature all-carbon construction and multi-tapered walls throughout. Our unique design and manufacturing process result in handlebars with maximum strength and minimal weight. Thicker walls are spec’d where added strength is needed like at the bends and clamp area. Thinner walls in less stressed areas keep the weight low. The Mini and Junior bars have eight wall thickness changes while the Expert bars have 10 due to the addition of a crossbar. In addition, the Expert bars have variably shaped tubing profiles, further boosting strength and rigidity. Do to the nature of the material, rider weight limits of 100, 115 and 135 pounds are necessary. Each bar is finished with a high-gloss clear coat with chrome and white graphics and a high-friction anti-slip coating at the clamp area.
Stout Stem
Part# Sizing WeightAVSS-53BK 53mm reach 326 grams
The Ave Stout stem is the only one with an integrated 45-degree upper headset compression ring. The ring is CNC-machined right into the bottom of the stem, making for a super-flush fit between the stem and the frame without lowering the bars any more than a traditional front-load/drop stem with spacers would. Each stem is extruded and CNC machined in Los Angeles, from 6061 aluminum alloy billet. They have a 53-millimeter reach, 0-degree offset.
35
SINZ Chromoly Handlebars
Sinz 4130-chromoly handlebars have a classic shape, bend and sweep for powerful starts, control in the air and railed cornering, as well as offer a great balance between low-weight and strength.
Part# Sizing Color Weight Rise Back Sweep Up Sweep WidthSBH-01 Pro Black 900 grams 8” 12˚ 2˚ 28”
SBH-02 Pro Jr. Black 875 grams 7.5” 12˚ 2˚ 27”
SBH-03 Pro Cru Black 820 grams 5.5” 12˚ 2˚ 27”
SBH-01W Pro White 900 grams 8” 12˚ 2˚ 28”
SBH-02W Pro Jr. White 875 grams 7.5” 12˚ 2˚ 27”
SBH-03W Pro Cru White 820 grams 5.5” 12˚ 2˚ 27”
SBH-01R Pro Red 900 grams 8” 12˚ 2˚ 28”
SBH-02R Pro Jr. Red 875 grams 7.5” 12˚ 2˚ 27”
SBH-03R Pro Cru Red 820 grams 5.5” 12˚ 2˚ 27”
SBH-01B Pro Blue 900 grams 8” 12˚ 2˚ 28”
SBH-02B Pro Jr. Blue 875 grams 7.5” 12˚ 2˚ 27”
SBH-03B Pro Cru Blue 820 grams 5.5” 12˚ 2˚ 27”
SINZ Alloy Handlebars
Sinz aluminum alloy handlebars are designed to help lightweight and smaller racers get the optimum pull, power and handling out of their bikes. Like the Chromoly bars, they have a classic shape, bend and sweep for powerful starts, control in the air and railed cornering.Part# Sizing Color Weight Rise Back Sweep Up Sweep WidthSBH-04 Expert Black 425 grams 5.75” 8˚ 2˚ 24.5”
SBH-05 Jr. Black 310 grams 4.25” 8˚ 2˚ 22”
SBH-06 Mini Black 255 grams 2.25” 8˚ 2˚ 20”
SBH-04W Expert White 425 grams 5.75” 8˚ 2˚ 24.5”
SBH-05W Jr. White 310 grams 4.25” 8˚ 2˚ 22”
SBH-06W Mini White 255 grams 2.25” 8˚ 2˚ 20”
SBH-04R Expert Red 425 grams 5.75” 8˚ 2˚ 24.5”
SBH-05R Jr. Red 310 grams 4.25” 8˚ 2˚ 22”
SBH-06R Mini Red 255 grams 2.25” 8˚ 2˚ 20”
SBH-04B Expert Blue 425 grams 5.75” 8˚ 2˚ 24.5”
SBH-05B Jr. Blue 310 grams 4.25” 8˚ 2˚ 22”
SBH-06B Mini Blue 255 grams 2.25” 8˚ 2˚ 20”
Also Available inRed
Also Available inBlue
36
SINZ Sticky Grips
Sticky Grips are one of the best-kept secrets of the Sinz product line. Their simple advanced design and proprietary rubber compound result in one of the most comfortable grips sold today.Part# Sizing Color WeightSSG-92-BK 92mm Black 70 grams
SSG-115-BK 115mm Black 85 grams
SSG-130-BK 130mm Black 110 grams
SSG-92-WH 92mm White 70 grams
SSG-115-WH 115mm White 85 grams
SSG-130-WH 130mm White 110 grams
SSG-92-RD 92mm Red 70 grams
SSG-115-RD 115mm Red 85 grams
SSG-130-RD 130mm Red 110 grams
SSG-92-BL 92mm Blue 70 grams
SSG-115-BL 115mm Blue 85 grams
SSG-130-BL 130mm Blue 110 grams
Bolt-on Grips
Sinz Elite Bolt-On Grips are the choice of top pro racers like Marc Willers, Arielle Martin and David Herman. They have a thin, comfortable gripping surface covered in a simple-yet-functional diamond pattern. The translucent rubber allows a silk-screened Sinz Elite logo plastic grip body below to show through. Anodized black clamps keep the grips in place while and plastic bar end caps protect the bars. They come in 90-, 115- and 135-millimeter lengths.Part# Sizing WeightSEG-90WH 90mm 82 grams
SEG-115WH 115mm 94 grams
SEG-135WH 135mm 103 grams
G-4 Bolt on Grips
With a 29.5-millimeter outside diameter, the G4 Thinline grips are the smallest bolt-ons available. They have an ultra-thin, multi-surface rubber grip that is designed to fit the hands perfectly. Anodized black end caps and clamps ensure long life and precise placement on the bars. For the ultimate comfort, the grips are right/left and up/down specific. Used by Rusty Nesvig, Brian Kirkham, Caroline Buchanan and Lauren Reynolds.Part# Color WeightTG4-0B Black 70 grams
TG4-0W White 85 grams
TG4-0RD Red 110 grams
TG4-0BL Blue 70 grams
Stem Lock
Part# SIZE WeightSSC-01 1 1/8” 70 grams
SSC-11 1” 55 grams
Sinz stem locks are a superior alternative to internal stem nuts. They clamp from the top of the stem to the bottom of the fork, keeping headsets tight. Lengths range from 175 to 270 millimeters. They are made from 6000-series aluminum alloy and are anodized black.
Also Available inWhite
38
SINZ Expert Cartridge Bearing Headset
Part# Sizing Color WeightSHSE-1BK 1” Expert Black 151 grams
SHSE-1WH 1” Expert White 151 grams
SHSE-118BK 1 1/8” Expert Black 164 grams
SHSE-118WH 1 1/8” Expert White 164 grams
SHSI-1BK 1” Integrated Black 95 grams
SHSI-1WH 1” Integrated White 95 grams
SHSI-118BK 1 1/8” Integrated Black 95 grams
SHSI-118WH 1 1/8” Integrated White 95 grams
SHSP-1BK 1” Pro Black 127 grams
SHSP-1WH 1” Pro White 127 grams
SHSP-118BK 1 1/8” Pro Black 127 grams
SHSP-118WH 1 1/8” Pro White 127 grams
Sinz’s proven and very popular integrated and standard-cup headsets have a new look for 2012. All models are now available in black or white with contrasting Sinz logos on the cups/dust cap and a vibrant red Sinz crop-circle logo on the top cap.
NEW
39
Sinz Elite iHub 20-Mil Front Wheel
The iHub 20-Mil wheel is the same as the standard version, but with a proprietary hollow, aluminum, 20-millimeter through-axle. The oversize axle boosts fork stiffness and improves steering accuracy for a more precise first straight and higher-speed cornering. The 20-Mil wheels must be used with the Sinz Elite Carbon Pro CFC 20-Mil forks. 20-mil rear wheels available spring 2012.Part# Size Weight ERDSEP20F-20 20” x 1.75” 816 grams 431mm
SEP20F-24 24” x 1.75” 948 grams 491.5mm
SINZ iHub Wheels
The iHub Wheels are the most advanced BMX wheels ever offered. The straight-pull spoke design allows the use of less spokes while boosting lateral rigidity, wheel strength and reducing weight. At the heart of the wheels are the lightweight Sinz Elite iHubs, which have hollow 15-millimeter aluminum-alloy axles paired with 10-millimeter button-head bolts. Massive 24-millimeter outer axle flanges create a substantial clamping surface between the hub and the dropouts. The oversize axles further improve lateral rigidity and help support the cassette body in the rear. Connecting the iHubs to a pair of brand new Sinz Elite hoops are triple-butted straight-pull spokes and oversize alloy Fat Nipples. The Pro and Expert wheels have 32 spokes front and rear while the Minis have 24. The rims, iHubs, spokes and nipples are finished in black with laser-etched hub and custom full-coverage rim graphics.
Part# Size Weight F Weight R ERDSEMW-20 Mini 20” x 1 1/8” 607 grams 748 grams 431mm
SEEW-20 Expert 20” x 1 3/8” 648 grams 788 grams 431mm
SEEW-24 Expert 24” x 1 3/8” 725 grams 866 grams 497.5mm
SEEW-20 Pro 20” x 1.75” 648 grams 788 grams 431mm
SEEW-24 Pro 24” x 1.75” 725 grams 866 grams 497.5mm
NEW
NEW
40
SINZ Cassette Wheels
Part# Size Color Weight F Weight R ERDSWMC-20BL 20” x 1.75” Blue 616 grams 878 grams 392.1mm
SWMC-20RD 24” x 1.75” Red 616 grams 878 grams 392.1mm
SWEC-20BL 20” x 1 3/8” Blue 703 grams 953 grams 431mm
SWEC-20RD 20” x 1 3/8” Red 703 grams 953 grams 431mm
SWEC-24BL 24” x 1 3/8” Blue 858 grams 1008 grams 497.5mm
SWEC-24RD 24” x 1 3/8” Red 858 grams 1008 grams 497.5mm
SWPC-20BL 20” x 1.5” Blue 829 grams 1120 grams 397.1mm
SWPC-20RD 20” x 1.5” Red 829 grams 1120 grams 397.1mm
SWPC-24BL 24” x 1.5” Blue 983 grams 1259 grams 494mm
SWPC-24RD 24” x 1.5” Red 983 grams 1259 grams 494mm
Sinz Pro Cassette Wheels Built using new lightweight Sinz 20 or 24 x 1.75-inch double-wall rims, sealed-bearing Sinz hubs with hollow axles and 32 front and 36 rear spokes laced 3-cross, Sinz Pro wheels are an excellent choice for racing or training. The rear cassette hub is Shimano-compatible. They come in anodized black with red, blue or sivler rim graphics and weigh just 1,870 grams per pair in 20-inch and 2,080 grams in 24-inch including the rims strips, cog and spacers.
Sinz Expert Cassette Wheels The Expert wheels are built using new lightweight Sinz 20 or 24 x 1 3/8-inch double-wall rims, sealed-bearing Sinz hubs with hollow axles and 32 front and 36 rear spokes laced 3-cross. The rear cassette hub is Shimano-compatible. Available in anodized black with red, blue or silver rim graphics, they weigh just 1,670 grams per pair in 20-inch and 1,830 grams in 24-inch including the rims strips, cog and spacers.
Sinz Mini Cassette Wheels Built using, new lightweight Sinz 20 x 1 1/8-inch double-wall rims 20 front and 24 rear spokes and sealed-bearing Sinz hubs with hollow axles. Sinz Mini wheels are perfect for racing or training. The rear cassette hub is Shimano-compatible. They come in anodized black with red, blue or sliver rim graphics and including the rims strips, cog and spacers, weigh just 1,600 grams per pair.
NEW
41
Wheels AVE’s wheels are fast, rigid and can withstand the rigors of freestyle riding, be it park, dirt or street. Rider tested for more than three years, they feature a straight-pull spoke design that boosts lateral rigidity and wheel strength while reducing weight. The hubs are fully CNC-machined and feature 10- and 14-millimeter chromoly axles that roll on super-smooth sealed bearings. Extra-large, 22-millimeter front and 25-millimeter rear axle flanges create a substantial clamping surface between the hub and the dropouts, further reducing lateral flex of the entire bike. Straight-pull spokes are approximately 30 percent stronger than J-bend spokes and there are no hub flanges to break. They come in all-black or Wild Eye graphics with black or white rims and include six extra spokes. Replacement spokes also are sold separately.
Part# Size Color ERD WeightAVEFW-BK 20” x 1 1/8” Black 431mm 780 grams
AVERW-BK 20” x 1.75” Black 497.5mm 1045 grams
AVEFW-WH 20” x 1 1/8” White 431mm 780 grams
AVEFW-WH 24”x 1.75” White 497.5mm 1045 grams
AVEFW-WILDBK 20” x 1 1/8” Wild Eye Black 431mm 780 grams
AVERW-WILDBK 20” x 1.75” Wild Eye Black 497.5mm 1045 grams
AVEFW-WILDWH 20” x 1 1/8” Wild Eye White 431mm 780 grams
AVERW-WILDWH 20” x 1.75” Wild Eye White 497.5mm 1045 grams
AVE 3/8-inch Triple Duty Axle Nuts
Ave’s Triple Duty nuts work in three ways. Run the nuts alone with the hex side out, and they work as 3/8-inch-to-14-mil adapters with pegs. Don’t run pegs? Well, just pair the nuts with the spacers and voila. Flip them around so the hex side is in and use the nuts alone to mount 3/8-inch axle wheels to 3/8-inch compatible dropouts. That’s three uses in one beautifully simple product. A pack of nuts includes two step-down nuts and two spacers.
Part# Color WeightSTDB-01 Black 48 grams
42
XXX Cranks Super strong, yet lightweight, Sinz Elite XXX Cranks are built specifically for BMX. When assembled, hollow-forged aluminum arms spin on smooth-as-silk sealed bottom bracket bearings and a super-stiff, hollow, 4130-chromoly, spindle. Just add your favorite Sinz 104-BCD, 4-bolt chainring and you’re ready to roll. They fit 68 or 73-millimeter bottom bracket shells.
Part# Size Color WeightSEXXX-2-165WH 165mm White 920 grams
SEXXX-2-170WH 170mm White 920 grams
SEXXX-2-175WH 175mm White 932 grams
SEXXX-2-180WH 180mm White 932 grams
SEXXX-2-165BK 165mm Black 920 grams
SEXXX-2-165WH 170mm Black 920 grams
SEXXX-2-165WH 175mm Black 932 grams
SEXXX-2-165WH 180mm Black 932 grams
SEXXX-2-165BL 165mm Blue 920 grams
SEXXX-2-165BL 170mm Blue 920 grams
SEXXX-2-165BL 175mm Blue 932 grams
SEXXX-2-165BL 180mm Blue 932 grams
SEXXX-2-165RD 165mm Red 920 grams
SEXXX-2-165RD 170mm Red 920 grams
SEXXX-2-165RD 175mm Red 932 grams
SEXXX-2-165RD 180mm Red 932 grams
SINZ ISIS Cranks
Sinz ISIS-compatible crank arms are forged from 6000-series aluminum. The double-sided spider fits standard five-bolt,110-BCD pattern chainrings. Laser-etched logos with a black finish add style to any bike.
Part# Sizing WeightSEC-14 155mm 456 grams
SEC-15 160mm 473 grams
SEC-16 165mm 487 grams
SEC-17 170mm 510 grams
SEC-18 175mm 524 grams
SEC-19 180mm 522 grams
SINZ Square Taper Crank
Sinz Square Taper crank arms are forged from 6000-series aluminum. The double-sided spider fits standard five-bolt,110-BCD pattern chainrings. Laser-etched logos with a black finish add style to any bike.
Part# Sizing WeightSEC-19 115mm 454 grams
SEC-20 120mm 469 grams
SEC-21 125mm 483 grams
SEC-21 130mm 489 grams
SEC-01 135mm 416 grams
SEC-02 140mm 425 grams
SEC-03 145mm 436 grams
SEC-04 150mm 450 grams
SEC-05 155mm 456 grams
SEC-06 160mm 473 grams
SEC-07 165mm 487 grams
SEC-08 170mm 510 grams
SEC-09 175mm 524 grams
SEC-27 180mm 535 grams
NEW
43
SINZ Chromoly Cranks Cranks Sinz chromoly 2-piece cranks spin on a 19 millimeter chromoly spindle, precision sealed bearings and tubular chromoly arms. They fit European bottom bracket shells. Available in black or white.
Part# Size Color WeightSCPC-165WH 165mm White 970 grams
SCPC-170WH 170mm White 985 grams
SCPC-175WH 175mm White 995 grams
SCPC-180WH 180mm White 1000 grams
SCPC-165BK 165mm Black 970 grams
SCPC-170BK 170mm Black 985 grams
SCPC-175BK 175mm Black 9395 grams
SCPC-180BK 180mm Black 1000 grams
SINZ Elite Bottom Bracket
Part# Sizing WeightSEBBP-1-BK 24mm 118 grams
SEBBP-1-WH 24mm 118 grams
Part# Sizing WeightSEBBE-1-BK 155mm 89 grams
SEBBE-1-WH 160mm 89 grams
SEBBE-1-BL 165mm 89 grams
SEBBE-1-RD 170mm 89 grams
Sinz Elite is now offering two new external-bearing bottom brackets under the XXX name. Both bottom brackets feature forged and CNC-machined external aluminum cups and are compatible with Sinz Elite XXX, Shimano and other 24-millimeter spindle cranksets and fit standard English thread (1.37 x 24T) 68- and 73-millimeter bottom bracket shells. The Pro model bottom bracket has the added bonus of precision tapered roller bearings. The super-durable bearings will provide longer bottom bracket life even under extreme use. The Expert model rolls on super-high-precision sealed bearings, but has a weight of 89 grams compared to 118 grams for the Pro. Sinz Elite XXX bottom brackets, be it the Pro or Expert, are the ultimate upgrade for any 24-millimeter spindle crankset. Buy the Pro for extra long bottom bracket life or choose the Expert if your priority is low weight. Either way, you’ll get a killer, high-quality, silky smooth bottom bracket.
SINZ Elite XXX Pro BB:• Super-Durable Precision Taper Roller Bearings• Forged & CNC-Machined Aluminum Cups• Shimano Compatible• BSA 1.37” x 24T, Fit 68 & 73-mm BB Shells• 118 grams SINZ Elite XXX Expert BB:• High-Precision Sealed Bearings• Forged & CNC-Machined Aluminum Cups• Shimano Compatible• BSA 1.37” x 24T, Fit 68 & 73-mm BB Shells• 89 grams
SINZ Elite XXX Expert BB:
SINZ Elite XXX Pro BB:
NEW
44
Square-Taper Bottom Brackets
Pro TI The Pro Squre-taper TI bottom bracket features a hollow titanium spindle that smoothly spins on three precision bearings, a carbon fiber center bearing shield and aluminum cups.
Pro The Pro Square-taper bottom bracket features a hollow chromoly spindle that smoothly spins on three precision bearings, a carbon fiber center bearing sheild and aluminum cups.Expert The Expert square-taper bottom bracket features a hollow chromoly spindle that smoothly spins on three precision bearings, an aluminum center bearing shield and aluminum cups.
Junior The Junior square-taper bottom bracket has a chromoly spindle, two precision bearings, aluminum bearing shield and aluminum cups.
Part# Sizing WeightSBJC-08 Junior 68 x 113 310 grams
SBJC-09 Junior 68 x 118 314 grams
SBJC-10 Junior 68 x 122 318 grams
SBJC-08 Expert 68 x 113 210 grams
SBJC-09 Expert 68 x 118 210 grams
SBIT-01 Pro TI 68 x 108 205 grams
SBIT-02 Pro TI 68 x 113 208 grams
SBIT-03 Pro TI 68 x 118 210 grams
ISISBottom Brackets
Pro ISIS Titanium Pro ISIS Ti bottom brackets feature a hollow titanium ISIS spindle that smoothly spins on three precision ceramic bearings, a carbon fiber center bearing shield and aluminum cups.
Pro ISIS Chromoly The Pro ISIS bottom bracket features a hollow chromoly ISIS spindle that smoothly spins on three precision ceramic bearings, a carbon fiber center bearing and aluminum cups.
Part# Sizing WeightSBIC-01 Chomoly 68 x 113 280 grams
SBIC-02 Chomoly 68 x 118 282 grams
SBIC-03 Chomoly 68 x 122 284 grams
SBIT-01 Titanium 68 x 113 208 grams
SBIT-02 Titanium 68 x 118 210 grams
SBIT-03 Titanium 68 x 122 212 grams
2610HX Chain
Part# Sizing Color WeightKZ610HX-BL 1/2 x 3/32 Blue/Black 319 grams
KZ610HX-RD 1/2 x 3/32 Red/Black 319 grams
KZ610HX-WH 1/2 x 3/32 White/black 319 grams
X9SL Chain
X1 Chain
Part# Sizing WeightKX9SL 1/2 x 3/32 221 grams
Part# Sizing WeightKX1 1/2 x 3/32 263 grams
45
Expert 5-Bolt Chainrings Sinz Expert chainrings are an excellent value. Stamped and then machined from 3-millimeter stock for a perfect fit, they are compatible with 110-millimeter bolt pattern cranks. Laser-etched logos accent four anodized finishes. They fit 3/32” or 1/8” chains and come in sizes 36 through 44-tooth. Available in four colors.
Part# Sizing Color WeightSECA-14 36 tooth Red 38 grams
SECA-15 37 tooth Red 44 grams
SECA-16 38 tooth Red 51 grams
SECA-17 39 tooth Red 58 grams
SECA-18 40 tooth Red 65 grams
SECA-19 41 tooth Red 73 grams
SECA-20 42 tooth Red 83 grams
SECA-21 43 tooth Red 90 grams
SECA-22 44 tooth Red 100 grams
SECA-01 36 tooth Blue 38 grams
SECA-02 37 tooth Blue 44 grams
SECA-03 38 tooth Blue 51 grams
SECA-04 39 tooth Blue 58 grams
SECA-05 40 tooth Blue 67 grams
SECA-06 41 tooth Blue 73 grams
SECA-07 42 tooth Blue 83 grams
SECA-08 43 tooth Blue 90 grams
SECA-09 44 tooth Blue 100 grams
Part# Sizing Color WeightSECS-01 36 tooth Silver 38 grams
SECS-02 37 tooth Silver 44 grams
SECS-03 38 tooth Silver 51 grams
SECS-04 39 tooth Silver 58 grams
SECS-05 40 tooth Silver 67 grams
SECS-06 41 tooth Silver 73 grams
SECS-07 42 tooth Silver 83 grams
SECS-08 43 tooth Silver 90 grams
SECS-09 44 tooth Silver 100 grams
SECB-01 36 tooth Black 38 grams
SECB-02 37 tooth Black 44 grams
SECB-03 38 tooth Black 51 grams
SECB-04 39 tooth Black 58 grams
SECB-05 40 tooth Black 67 grams
SECB-06 41 tooth Black 73 grams
SECB-07 42 tooth Black 83 grams
SECB-08 43 tooth Black 90 grams
SECB-09 44 tooth Black 100 grams
SINZ 4-Bolt Chainrings
Sinz 4-bolt, 104-bolt pattern chainrings are 5-millimeters thick, come in 36- through 46-tooth sizes and come in black. They’re compatible with 3/32” and 1/8” chains.
Part# Sizing Color WeightSPRC-36 36 tooth Black 19 grams
SPRC-37 37 tooth Black 33 grams
SPRC-38 38 tooth Black 41 grams
SPRC-39 39 tooth Black 59 grams
SPRC-40 40 tooth Black 60 grams
SPRC-41 41 tooth Black 73 grams
SPRC-42 42 tooth Black 87 grams
SPRC-43 43 tooth Black 100 grams
SPRC-44 44 tooth Black 116 grams
SPRC-45 45 tooth Black 126 grams
SPRC-46 46 tooth Black 144 grams
46
CNC Chainwheels
Sinz Pro CNC-machined chainwheels are 5 millimeters thick and designed for extra strength and low weight. They fit 19-millimeter spindles and come in 25-tooth and 38-through 44-tooth sizes in basic black.
Part# Sizing Color WeightSPCW-25 25 tooth Black 55 grams
SPCW-38 38 tooth Black 120 grams
SPCW-39 39 tooth Black 140 grams
SPCW-40 40 tooth Black 145 grams
SPCW-41 41 tooth Black 160 grams
SPCW-42 42 tooth Black 165 grams
SPCW-43 43 tooth Black 170 grams
SPCW-44 44 tooth Black 180 grams
SINZ Aluminum-Alloy Chainring Bolts
Sinz 6061 aluminum alloy chainring bolts are 4-millimeters long. High-strength aluminum reduces weight, but ensure reliability. Available in five anodized colors.
Part# Sizing Color WeightSCRB-02 4mm Black 8 grams
SCRB-03 4mm Blue 8 grams
SCRB-04 4mm Red 8 grams
SCRB-05 4mm Silver 8 grams
SCRB-06 4mm Gold 8 grams
The new Sinz Elite 4130-chromoly chainring bolts come in 4- and 7-millimeter lengths to fit a wide variety of spider/chainring combos. Choose from chrome-plated or ED Black finish with laser-etched Sinz logos.
Part# Sizing WeightSECBC-4BK 4mm 18 grams
SECBC-7BK 7mm 25 grams
SINZ Chromoly Chainring Bolts NEW
47
SINZ Chromoly Lite Cog
Sinz chromoly cogs are super lightweight. A machined shoulder makes them easier to remove and ensures correct chain-line without a spacer. Sizes 13-through-18 tooth.Part# Sizing WeightSCLC-13 13 tooth 22 grams
SCLC-14 14 tooth 24 grams
SCLC-15 15 tooth 28 grams
SCLC-16 16 tooth 33 grams
SCLC-17 17 tooth 38 grams
SCLC-18 18 tooth 45 grams
SINZ Alloy Racing Cog
Sinz ultra-lightweight aluminum-alloy cogs are the perfect final lightweight detail for mini, junior and expert bikes. A machined shoulder makes them easier to remove and ensures correct cog spacing and chain-line. Available in 14- through 18-tooth sizes, each cog is anodized black with a laser-etched logo.
SINZ Freewheel
A pretty basic and very reliable freewheel, they have a four-prong design and are finished in durable chrome.
Part# Sizing WeightSPFC-01 16 tooth 140 grams
SPFC-02 17 tooth 165 grams
SPFC-03 18 tooth 170 grams
Part# Sizing WeightSAC-14 14 tooth 17 grams
SAC-15 15 tooth 19 grams
SAC-16 16 tooth 21 grams
SAC-17 17 tooth 23 grams
SAC-18 18 tooth 25 grams
SINZ Cog Pack
The Sinz Cog Pack includes a full run of steel cog sizes in 12-through 18-tooth. They are ED black and Shimano cassette compatible. They fit 3/32” and 1 1/8” chains.Part# Sizing WeightSCP-02 12-18 tooth 13 grams - 45 grams
photo by: Johnny Little
48
Pro Tensioners
Sinz Pro Chain Tensioners are CNC-machined from billet aluminum. Two mounting holes add versatility and greater reach for optimum adjustability, while also keeping the weight at a feathery 79 grams. With a thickness of 5 millimeters, they protect dropouts as well as they hold wheels in place. Available in four anodized colors.
Part# Color WeightSCPT-01 Black 79 grams
SCPT-02 Silver 79 grams
SCPT-03 Red 79 grams
SCPT-04 Blue 79 grams
SINZ Expert Tensioners
Like the Pro Tensioners, Sinz Expert Chain Tensioners feature a two-mounting hole design for better adjustability, but with a shorter overall length. They are made from cold-forged aluminum and come in four anodized colors. They weigh just 68 grams.
Part# Color WeightSCT-01 Black 68 grams
SCT-02 Silver 68 grams
SCT-03 Red 68 grams
SCT-04 Blue 68 grams
SINZ Mini Tensioners
Sinz Mini Chain Tensioners are perfect for small frames or those who need a lightweight, no-frills chain tensioner. CNC-machined aluminum and anodized black, they weigh a mere 30 grams.
Part# Color WeightSCMT-01 Black 30 grams
SINZ 10-and 20-Millimeter The unique rear dropouts on all Intense and Speed frames offer versatility no other frames can claim. Every frame comes with two sets of custom, proprietary, rear dropout Blocks. The forged and precision CNC-machined Blocks allow you to run either standard 10-millimeter axle wheels or the stiffer and better-handling Sinz Elite 20-millimeter through-axle wheels. Use the 10-millimeter blocks and run any standard wheel set, or, if you prefer better gate snaps, a more powerful and efficient pull down the first straight and better handling, upgrade your wheels to the Sinz Elite 20-millimeter iHub wheels and use the 20-millimeter Blocks. Both 10- and 20-millimeter Blocks are also available separately. They come in black anodized only.
Part# Size WeightSRC10-BK 10mm 35 grams
SRC20-BK 20mm 26 grams
NEW
49
Mini Linear-Pull Brakes
Sinz Mini linear-pull brake kits have 85-millimeter cantilever arms, a maximum 40-millimeter reach lever and a Teflon-lined cable housing making them a great upgrade for any little racer. Available in four colors.
Part# Color WeightSBC-02 Black 330 grams
SBC-04 White 330 grams
SBC-06 Red 330 grams
SBC-08 Blue 330 grams
SINZPro Linear-Pull Arms
Sinz Pro linear-pull brake kits feature 110-millimeter cantilever arms paired with a maximum 42-millimeter reach lever. A Teflon-lined cable housing ensures smooth and powerful braking. Available in four colors.
Part# Color WeightSBC-01 Black 355 grams
SBC-03 White 355 grams
SBC-05 Red 355 grams
SBC-07 Blue 355 grams
SINZ Mini Linear-Pull Arms
Sinz Mini linear-pull brake arms are 85 millimeters for lower weight, providing plenty of braking power for smaller riders. Two cable noodles and brake pads are included. They are available in black only.
Part# Color WeightSMB-01 Black 150 grams
SINZ Pro Linear-Pull Arms
Sinz Pro linear-pull brake arms are 110 millimeters long for extra powerful braking. Two cable noodles and pads are available included. Black only.
Part# Color WeightSPB-01 Black 170 grams
SINZ Brake Boss Adaptors
Made in the USA from 7000-series aluminum, Sinz brake boss adaptors provide an extra 16 millimeters of brake positioning, allowing for greater range of rear wheel movement or to use 20-inch wheels on frames designed for 20” x 13/8” wheels. They weigh just 22 grams.
Part# Color WeightSBPE-01 Silver 22 grams
51
SINZ Linear-Pull Arms
Sinz Expert Brake Lever Sinz Expert brake levers have a maximum 47-millimeter reach and a spring-loaded design for a quick and smooth return. Available in two colors.
Sinz Junior Brake Lever Sinz Junior brake levers have a 50-millimeter reach and a maximum spring-loaded design for a quick and smooth return. Available in two colors.
Sinz Mini Brake Lever Sinz Mini brake levers are perfect for racers with smaller hands. At just a maximum 45-millimeters, they have the shortest reach of any BMX lever available. Available in two colors. Part# Color WeightSML-01 Black/Red 82 grams
SML-03 Black 82 grams
SJL-01 Black/Red 85 grams
SJL-02 Black 85 grams
SEL-01 Black/Red 86 grams
SEL-02 Black 86 grams
SINZ Brake Pads
Sinz brake pads are whopping 70 millimeters long. A proprietary soft rubber compound provides the ultimate stopping power. A low-profile design makes for easy adjustments. Available in seven colors.
Part# Color WeightSBP-01 Red 66 grams
SBP-02 Blue 66 grams
SBP-03 Black 66 grams
SBP-04 Yellow 66 grams
SBP-05 Green 66 grams
SBP-06 Hot Pink 66 grams
SBP-07 White 66 grams
SINZ Brake Cables
Sinz super-smooth Teflon-lined brake cables are the perfect up-grade when super stopping power is the goal. Available in seven colors.
Part# Color WeightSSBC-01 Red 113 grams
SSBC-02 Blue 113 grams
SSBC-03 Black 113 grams
SSBC-04 Yellow 113 grams
SSBC-05 Green 113 grams
SSBC-06 Hot Pink 113 grams
SSBC-07 White 113 grams
52
THE Junior Icon Saddle
Like its big brother, the smaller Junior Icon saddle it has a narrow shape and makes a great BMX or mountain bike saddle. Chromoly rails are durable, yet lightweight. Available in five colors with a bold THE logo. Length: 10.5 inches. Width: 5 inches. Weight: 8.5 ounces.
Pro Icon Saddle
Part# Color WeightTIPS-BK Black 9.1oz
TIPS-WH White 9.1oz
TIPS-RD Red 9.1oz
TIPS-BL Blue 9.1oz
TIPS-BG Black/Gold 9.1oz
The Icon saddle is THE’s most popular model. A Flat nose and narrow shape provides comfort while the base incorporates a cutout for relief on long rides. Durable corners protect the saddle in case of a get-off.
Part# Color WeightTIJS-BK Black 10oz
TIJS-WH White 10oz
TIJS-RD Red 10oz
TIJS-BL Blue 10oz
TIJS-BG Black/Gold 10oz
THE DH SADDLE
The DH saddle is a beefed-up version of our Icon model. Designed to provide extra tire clearance on suspension bikes, it’s meant for all-mountain and down hill riding. A drop nose design helps eliminate snags on shorts. Chromoly rails are durable, yet lightweight.
Part# Color WeightTDHS-01 Black 9.4oz
THE Flow Saddle
Part# Color WeightTHFS-01 Black 8oz
The Flow saddle has a shape that works equally well for BMX or mountain biking. The Base incorporates D2 material in the sit-bone areA for comfort with a cutout for relief on long rides. It has strong chromoly rails, side and rear Kevlar panels for durability and embossed THE graphics. The 10 1/8” x 5” saddle weighs 226 grams.
NEW
NEW
53
Carbon Mini Seat
Part# Size WeightTCMS-01 20.4 152 grams
TCMS-02 20.2 152 grams
Mini seats include an integrated 9.5 inch carbon fiber seatpost, making them one of the trickest little seating options on the market. The seatpost fits 22.2 seat tubes. They weigh just 190 grams. The saddle is translucent smoke.
Mini Seat
SINZ Mini Seats and Post were designed for the light weight racers in mind. However it can be used by anyone looking to lighten up their bike. This light weight saddle will get you to the finish faster and have your bike looking tricked out with the translucent seat that comes in 5 colors. The Post is aluminum with the SINZ logo.
Part# Color WeightSMS-20 Red 203 grams
SMS-21 Blue 203 grams
SMS-22 Smoke 203 grams
SINZ Pro Seat Post
The Sinz Pro seat post is made from extruded 6061-aluminum alloy for maximum strength. The single-bolt clamp offers a full range of saddle adjustments via a 6-millimeter Allen bolt.
Part# Size WeightSPP-01 25.4” 299 grams
SPP-05 26.8” 309 grams
SPP-07 27.2” 318 grams
SPP-08 28.6” 330 grams
SINZ Quick Release Seat Post
Sinz quick-release seatpost clamps make saddle height adjustments a snap without any tools. They come in 25.4 and 31.8 sizes and come in four colors.
Part# Size Color WeightSQRC-01 31.8m Black 45 grams
SQRC-02 31.8m White 45 grams
SQRC-03 31.8m Red 45 grams
SQRC-04 31.8m Blue 45 grams
SQRC-05 25.4mm Black 37 grams
SQRC-06 25.4mm White 37 grams
SQRC-07 25.4mm Red 37 grams
SQRC-08 25.4mm Blue 37 grams
Part# Size WeightSPPC-01 25.4 21 grams
SPPC-02 28.6 21 grams
SPPC-03 31.8 21 grams
SPPC-04 25.4 23 grams
SPPC-05 28.6 23 grams
SPPC-06 31.8 23 grams
SINZ Lite Seat Post Clamp
Sinz seat-post clamps are designed to be super-lightweight with a clamping force that simply won’t fail. Available in 25.4, 28.6, 31.8 sizes.
54
Expert Clipless Pedal Sinz’s Expert Clipless pedals have a single-sided clipless design and in-molded pins. The design helps novice riders learn how to clip in and out. They have chromoly 9/16-inch spindles.
Part# Color WeightSECP-01 Black 510 grams
SINZ Mini Clipless Pedal Sinz Mini clipless pedals have a double-sided clip design in a lightweight and simple package. Race ready and built to last, they come in black only.
Part# Color WeightSMCP-01 Black 350 grams
SINZ Mini Platform Pedal Sinz Mini Platform pedals have a smaller platform to fit smaller feet. Twelve replaceable pins per pedal keep those feet connected to the bike. They weigh just 340 grams and come in black.
Part# Color WeightSMP-01 Black 354 grams
SINZ Pro Platform Pedal Sinz Pro Platform pedals have 28 replaceable pins per pedal for superior pedal-to-sole grip. They have chromoly 9/16-inch spindles. They weigh 580 grams and come in black.
Part# Color WeightSPP-20 Black 566 grams
SINZ Cleats
Shimano compatible Cleats
Part# Model WeightSRC-01 Shimano 56 grams
56
Lexan Cross Country Front Fender
The Pro XC front fender is made from flexible, vacuum-formed, mud-shedding Lexan. It has a two-piece design with a 3.25-inch width, a front section that measures 10.5 inches and a rear section that is 9.5 inches long. 2 universal fork mounts makes it easy to install and remove. They come in black, white new clear. The clear can be painted to add a touch of customization to any bike. Part# Color WeightTLFCCF-01 Black 176 grams
TLFCCF-06 White 176 grams
TLFCCF-01CL Clear 176 grams
THE Lexan Downhill Front Fender
The Pro DH front fender is made from flexible, vacuum-formed, mud-shedding polycarbonate. It has a two-piece design that measures 4 inches wide with a 10.5-inch long front section and a 9.5-inch long rear section. 2 universal fork mounts makes it easy to install and remove. They come in black, white or new clear, ready for custom painting.
Part# Color WeightTLFDF-01 Black 192 grams
TLFDF-06 White 192 grams
TLFDF-01CL Clear 192 grams
THE Lexan Rear Fender
The Pro rear fender is made from flexible, vacuum-formed, mud-shedding polycarbonate. It has a universal mounting bracket that fits almost any seatpost. They come in black , white or new clear, ready for custom painting.Part# Color WeightTLDF-01 Black 181 grams
TLDF-06 White 181 grams
TLDF-01CL Clear 181 grams
THE Lexan Shroud
The Pro Shroud attaches to the down tube of just about any frame with hook-and-loop tape and zip-ties. It measures 14 inches long by 5 inches wide. It’s made of flexible, vacuum-formed, mud-shedding polycarbonate. It comes in black, white or new clear, ready for custom painting. Part# Color WeightTLS-01 Black 43 grams
TLS-06 White 43 grams
TLS-01CL Clear 43 grams
57
THE Injected Sportline Front Fender THE Injected Sportline Front Fender
The Pro Shroud attaches to the down tube of just about any frame with hook-and-loop tape and zip-ties. It measures 14 inches long by 5 inches wide. It’s made of flexible, vacuum-formed, mud-shedding polycarbonate.
Part# Color WeightTIFDF-01 Black 177 grams
TIFDF-04 White 177 grams
The Sport rear fender has an integrated mounting bracket fits most seatposts. Made of injection-molded plastic, it’s 16.5 inches long and 6.5 inches wide. Available in black or white.
Part# Color WeightTIRF-01 Black 175 grams
TIRF-04 White 175 grams
THE Injected Sportline Front Fender
The Sport Shroud attaches to the down tube of just about any frame with hook-and-loop tape and zip-ties. It measures 14 inches long by 5 inches wide. It’s made of injection-molded plastic.
Part# Color WeightTISH-01 Black 59 grams
TISH-04 White 59 grams
THE Mud Flaps
Keeping flying mud out of your face and eyes during wet riding is even easier now with THE Mud Flaps. Simply attach a mud flap between the fork crown and bridge of any suspension fork and a grime-free smile is virtually guaranteed. Made of neoprene and sturdy vinyl, these elastomeric crud deflectors come in four sizes to fit all suspension forks currently on the market. Five hook-and-loop fasteners loop through reinforced slots ensuring reliable rip-free attachment to the forks.
Part# Size Fits TMF-0-6 Small 100mm Forks
TMF-0-7 Medium 140mm Forks
TMF-0-8 Large 180mm Forks
TMF-0-9 XLarge 200mm Forks
NEW
58
Number Plates
THE number plates are the official number plate of the UCI Supercross Series and the 2008 and 2012 Olympics.
Part# Color ModleTBMP-01 Blue Mini
TBMP-02 Red Mini
TBMP-10 Black Mini
TBMP-11 White Mini
TBMP-04 Blue Pro
TBMP-05 Red Pro
TBMP-08 Black Pro
TBMP-12 Whitef Pro
THE Backgrounds
THE number plate background kits include six colored backgrounds allowing full customization of our number plates. They come in Mini and Pro sizes.
Part# Size ColorsTBKM-06 Mini Plate Stickers all
TBKP-06 Pro Plate Stickers all
THE Number Kits
THE Numbers come in packs that include large and small numbers 0 through 9 with an extra 1, as well as six THE logo stickers. Available in black or white.
Part# ColorTNP-11 Black Numbers
TNPW-11 White Numbers
THE Batwing
The Batwing is the same side number plate used by Pro BMX racers in Supercross, World Championship and the Olympic events. They are made from embossed vinyl with permanent back-printed graphics. Hook-and-loop fasteners keep them in place. Stick some THE numbers on the two side panels and you’re ready for the big time. Available in red, blue and white.
Part# Color WeightTBW-2-BL Blue 28 grams
TBW-2-RD Red 28 grams
TBW-2-BW White 28 grams
NEW
NEW
59
Part# Color WeightTMPS-01 Carbon 92 grams
TMPS-02 Blue 92 grams
TMPS-03 Red 92 grams
TMPS-04 Yellow 92 grams
The THE Monocoque padset includes top tube, handlebar and stem pads. They feature a minimalist design that makes them almost disappear on the bike. Available in four colors.
THE Monocoque Padset
Part# Color WeightTPS-01 Carbon 94 grams
TPS-02 Blue 94 grams
TPS-03 Red 94 grams
TPS-04 Yellow 94 grams
The standard THE padset includes top tube, handlebar and stem pads. They feature a minimalist design that makes them almost disappear on the bike. Hook-and-loop straps keep them securely in place on the bike. Available in four colors.
THE Fully Intergrated Pad System
Bike Stands
Part# Model WeightTBS-01 the N/A
ABS-01 sinz N/A
The fully adjustable THE bike stand is made of injected high-density plastic and fits any type of bike. Large side panels make for great places for team sponsor or shop logos. The modular design make it easy to connect multiple stands to each other to hold a whole fleet of bikes in the garage or at the races.
The Sinz Bike stand is made from formed steel alloy Rubber sleeves will protect the bike’s finish. The sturdy platform will hold up almost any bike and give you the factory look.
60
Size Cross Country All Mountain Free Ride Down Hill Dirt JumpSystem 1
2.00 ITXC-S1-200
System 2
2.00 ITXC-S2-200
System 3
2.00 ITXC-S3-200
System 4
225 ITXC-S4-225
System 5
2.10 ITXC-S5-210
2.25 ITXC-S1-225
System 29
2.25 ITXC-29-225
Invader
2.35 ITAM-IV-235 ITFR-IV-235 ITDH-IV-235
2.50 ITAM-IV-250 ITFR-IV-250 ITDH-IV-250
Edge
2.35 ITAM-ED-235 ITFR-ED-235 ITDH-ED-235
2.50 ITAM-ED-250 ITFR-ED-250 ITDH-ED-250
909
2.35 ITAM-99-235 ITFR-99-235 ITDH-99-235
2.50 ITAM-99-250 ITFR-99-250 ITDH-99-250
Intruder
2.35 ITDH-IT-235
2.50 ITDH-IT-250
Spike
2.50 ITDH-SP-250
MK2
2.10 ITDJ-MK-210
2.25 ITDJ-MK-225
Cross Country All Mountain Free Ride Down Hill Dirt JumpLSG Yes Yes Yes Yes Yes
Plies Single Single Double Double Single
Compound C3 SR+C3+SR SR+C3+SR SR C3
Bead Folding Folding Folding Folding Folding
PFB Yes
Low Specific Gravity Rubber compound used to reduce the weight of the tire casing
Intense’s propietary Cross Country Compoud, provides excellent traction and durability.
Refers to layers of reinforcing fabric in a tire. Single-ply tyres are constucted with a single fabric layer for fast rolling and lightweight tyres.
Intense’s orginal Sticky Rubber™ is made with a soft 50 durometer compound with a very slow rebound for outstanding control.
Refers to a layers of reinforcing fabric in a tyre. Two-ply tires are constructed with a double fabric layer for increased durability and flat resistance.
Dual Compound tires combine SR compound on the sides of the tyre and C3 in the center treads. For the best combination of performance and durability.
By using a lightweight & flexible bead we are able to reduce the weight of the tires. They are also easier to handle and store.
Pinch Flat Bumper is an insert added between the bead and the tread to reduce chances of pinch flatting and provide additional support at a lower tire pressures.
LSG C3 1 Ply Casing SR
2 Ply Casing SR+C3+SR Folding Bead PFB
ITS is a performance-driven company. We design our tyres with the performance enthusiast and World Cup racer in mind, offering a variety of race-proven tread and compound. Our newest tyres feature a dramatic weight savings over previous generation tires by using LSG technology. LSG only affects the casing of the tire, leaving the tread compounds intact. We also modified our Dual Compound tire range to include C3 and Sticky Rubber™ compounds, increasing thegrip while maintaning great speed.
61
System 1
System 1 is designed for XC use. It features a large air volume casing with widely spaced knobs for rapid clearance of mud and excellent control in loose conditions.
ITS System 2
System 2 is a versatile XC tyre capable of performing in mixed conditions. The continuous row of center knobs provide very low rolling resistance while the side knobs offer plenty of bite when leaning the bike hard.
ITS System 3
System 3 is designed to be used as a rear tire in dry conditions. With its MicroKnobby center tread and aggressive side knobs it offers superb traction and great cornering control.
ITS System 4
System 4 is a very versatile tyre capable of handling steep climbs, gnarly descents, and aggressive cornering. It truly is a do all tyre. The tire’s casing is squared, giving the knobs a greater contact surface for added traction and control.
ITS System 5
System 5 offers great performance in soft to intermediate conditions. The chevron knob pattern is fast rolling and offers plenty of bite.
ITS System 29
System 29’s huge air volume makes it an excellent trail tyre, capable of tackling gnarly terrain with total confidence. The tread pattern provides low rolling resistance and plenty of hook up.
Conditions: Wet, Mud, Sand Conditions: Hardpack, Sand, Rock
Conditions: Hardpack Conditions: Soft, Intermediate, Hardpack
Conditions: Intermediate Conditions: Soft, Intermediate
62
Invader
Formerly known as “DH” the Invader is a mutant tread pattern that can handle a variety of conditions when matched to the right casing and compound. See chart on page 61 for more information regarding casing, rubber and ride styles.
ITS Edge
The Edge features a very aggressive tread pattern with knobs in various shapes that adapt to a wide range of conditions. It is an extremely versatile tire suitable for all mountain use, free ride, or downhill. Its’ ramped leading edges offer very low rolling resistance while the squared and angled knobs cut into the trail for maximum grip. See chart on page 61 for more information regarding casing, rubber and ride styles.
ITS 909
The 909 is a tough tyre ideal for loose, soft or intermediate soil. See chart on page 61 for more information regarding casing, rubber and ride styles. See chart on page 61 for more information regarding casing, rubber and ride styles.
ITS Intruder
ITS Spike
Spiked knobs dig into mud for unbelievable traction in the gnarliest conditions, giving the edge needed to finish ahead of the competition. Made with a 2 ply casing, full StickyRubber™ tread and added protection of the pinch flat bumper. Downhill specific.
ITS MK2
The MK2 is the fastest and grippiest tire available for dirt jumping and urban riding. It features thousands of MicroKnobs, each having a ramped leading edge for the lowest rolling resistance possible. The updated MK2 inverts the center tread section for greater durability.
Conditions: Intermediate, Hard Conditions: Intermediate, Hard
Conditions: Intermediate, Hard, Soft
The Intruder is a downhill specific tire, which features wide spacing between knobs to aid the rapid clearance of mud and provide excellent traction in the hard pack sections of a wet course. See chart on page 61 for more information regarding casing, rubber and ride styles.
Conditions: Wet, Soft
Conditions:Very Wet, Muddy Conditions: Dry, Hardpack
63
MK2 The worlds #1 BMX tyre, has been improved with LSG material to reduce the overall weight, a new ‘Drag Strip’ center ridge to get you rolling faster and decrease tire wear, all this matched with MicroKnobbys on the sides, the MK2 gives you our most advanced turning technology. The longer lasting MK2 tire is not only the best value in BMX, it gives you ultimate traction and reduced rotational weight to help you go as fast as you can on the BMX track or trail.
Size 20” Folding Bead 24” Folding Bead1” IMK-20100 / 190 grams IMK-24100 / 205 grams
1 1/8” IMK-20118 / 210 grams IMK-24118 / 215 grams
1 3/8” IMK-20138 / 250 grams IMK-24138 / 275 grams
1.5” IMK-20150 / 280 grams IMK-24150 / 340 grams
1.75” IMK-20175 / 380 grams IMK-24175 / 410 grams
1.85” IMK-24185 / 550 grams
2.00” IMK-20200 / 450 grams
2.25” IMK-20225 / 525 grams
ITS Hustler
Although it was designed for street riding, the Hustler caught the eyes of pro riders who recognized its potential as a great racing tyre. Sifiso Nhalapo may have been the first to run it in the front then front and rear. Others soon gave it a try. The Hustler is now part of the rubber arsenal of proven winners like Marc Willers, David Herman, Arielle Martin, Dominique Daniels and dozens of other top pro and amateur racers. We now offer it with 120TPI casings. The higher thread-count casing improves tyre “feel,” ride quality and durability (reduces cutting), boosts sidewall stiffness and, maybe most important, reduces all-important rotational weight. A 20 x 1.75, 120 TPI Hustler weights 354 grams (12.48 ounces), about 13 grams less than a standard Hustler. Wire-bead and Kevlar-bead models with standard casings also are available. Size 20” Folding Bead 20” Wire Bead1 1/8” IBMX-20118 / 265 grams
1 3/8” IBMX-20138 / 302 grams
1.5” IBMK-201500 / 300 grams
1.75” IBMX-08 / 367 grams
1.95” IBMX-07 / 427 grams
MK2
No other BMX tire is as fast and versatile as the AVE MK2. With AVE’s proprietary C3 rubber compound, 5,000 low-profile knobs and super-fast rolling center strip, it’s the ultimate tire for street riding, dirt jumping, concrete parks and wood ramps. Two-ply casings with wire bead wire. Available in 20 x 2.00 and 20 x 2.25.
Size 20” Wire Bead2.00” AVMK2-20200 / 450 grams
2.25” AVMK2-20225 / 525 grams
64
NEW
Ultra Lightweight Tubes
Size 20” Folding Bead WeightIBXT-01 20” x 1 3/8” 56 grams
IBXT-05 20” x 1.5” 89 grams
IBXT-03 24” x 1 3/8” 68 grams
IBXT-06 24” x 1.5” 110 grams
Hoody
Part# SizeTSS-05 XS
TSS-06 SM
TSS-07 MD
TSS-08 LG
TSS-09 XL
TSS-10 XXL
With heavy, quilted, cotton fleece on the outside and a luxurious silk lining inside, the THE Quilted Hoody is guaranteed to keep you warm and comfy when the temperature drops. It has thumb loops at the cuffs, chrome and carbon THE logos and custom THE zipper pulls.
Part# SizeIBTEE-FAC-6 Adult SM
IBTEE-FAC-7 Adult MD
IBTEE-FAC-8 Adult LG
IBTEE-FAC-9 Adult XL
IBTEE-FAC-10 Adult XXL
The Intense Team Tee is the official T-shirt of Factory Intense. They come in navy blue with the Intense Shield in Team Blue and yellow. The shirts are 100-percent cotton, Hanes, ring-spun Tees. Part# Size
SPTEE-0-2 Youth MD
SPTEE-0-3 Youth LG
SPTEE-0-6 Adult SM
SPTEE-0-7 Adult MD
SPTEE-0-8 Adult LG
SPTEE-0-9 Adult XL
SPTEE-0-10 Adult XXL
The Speed Just Plain Fast T-shirt features the “Just Plain Fast” tag line on the front in red and white and the Speed Bicycles Bar Code logo on back in white and yellow. These are the official T-shirt of the Factory Speed Team. Featuring 100-percent cotton, Hanes, ring-spun shirts, they come in youth and adult sizes.
65
You Dig Tee
Part# SizeETEE-UDG-2 Youth MD
ETEE-UDG-3 Youth LG
ETEE-UDG-6 Adult SM
ETEE-UDG-7 Adult MD
ETEE-UDG-8 Adult LG
ETEE-UDG-9 Adult XL
EYE Heart Ave Tee
Part# SizeETEE-HAV-2 Youth MD
ETEE-HAV-3 Youth LG
ETEE-HAV-6 Adult SM
ETEE-HAV-7 Adult MD
ETEE-HAV-8 Adult LG
Visual Noise Tee
Part# SizeETEE-0-6 Adult SM
ETEE-0-7 Adult MD
ETEE-0-8 Adult LG
ETEE-0-9 Adult XL
ETEE-0-10 Adult XXL
“You Dig?” is a play on words-as in, “Do you get it?” and “Do you dig trails?” Clever, right? The Tees are chocolate brown with multi-colored graphics and the EYE logo. As always, 100-percent cotton and available in youth and adult sizes.
Eye Heart AVE Tee comes in white and has the two-color EYE Heart AVE graphic featuring the EYE and AVE logos printed on 100-percent cotton V-neck Tees. Available in youth and adult sizes.
The original EYE T-shirt, Visual Noise features a monochromatic blue graffiti-inspired graphic printed on a blue 100-percent cotton T-shirt. They also come in adult sizes only.
Hats
You’ve probably seen these caps on the top step of many a podium in 2011. They feature the Speed Bar Code logo embroidered on red/black Flex Fit 210 Fitted caps or all black Top Gun caps. The logo is the black, white and yellow head badge logo used on Speed frames and the Factory Speed jerseys. Available in S/M and L/XL fitted sizes
Hats
Part# Size ModelIBHPF-6-7B SM/MD Flexfit Premium Fitted Hat Black Logo
IBHPF-8-9B LG/XL Flexfit Premium Fitted Hat Black Logo
IBHPF-6-7W SM/MD Flexfit Premium Fitted Hat White Logo
IBHPF-8-9W LG/XL Flexfit Premium Fitted Hat White Logo
IBHTG-6-7 SM/MD Flexfit Top Gun Hat
IBHTG-8-9 LG/XL Flexfit Top Gun Hat
The official hat of Factory Intense, the Intense hats are embroidered with black or white Intense Shields on all-black 210 Fitted Flex Fit and Flex Fit Top Gun hats. Available in S/M and L/XL fitted sizes.
Part# Size ModelSPHPF-6-7 SM/MD Flexfit Premium Fitted Hat
SPHPF-8-9 LG/XL Flexfit Premium Fitted Hat
SPHTG-6-7 SM/MD Flexfit Top Gun Hat
SPHTG-8-9 LG/XL Flexfit Top Gun Hat
66
Race Bikes Sizing ChartModle Frame Fork Headset Handlebar Stem Grips Saddle/Post Freewheel Crankset/BB Sets
Pro Cru 21.24” 6061 Hydroformed TT
SINZ Chromoly Race Fork 1 1/8”
1 1/8” Thread-less Alloy cap
SINZ Chromoly 5.5”
SINZ Pro Lite 50mm
SINZ 130mm Sticky Grips
THE Icon Jr/ SINZ Alloy
DNP 18“T” SINZ 3 pc 180mm Chromly with Sealed Bearings
Pro XL 21” 6061 Hydroformed TT
SINZ Chromoly Race Fork 1 1/8”
1 1/8” Thread-less Alloy cap
SINZ Chromoly 8” SINZ Pro Lite 50mm
SINZ 130mm Sticky Grips
THE Icon Jr/ SINZ Alloy
DNP 16“T” SINZ 3 pc 180mm Chromly with Sealed Bearings
Pro 20.5” 6061 Hydroformed TT
SINZ Chromoly Race Fork 1 1/8”
1 1/8” Thread-less Alloy cap
SINZ Chromoly 7.5” SINZ Pro Lite 50mm
SINZ 130mm Sticky Grips
THE Icon Jr/ SINZ Alloy
DNP 16“T” SINZ 3 pc 175mm Chromly with Sealed Bearings
Expert XL 21” 6061 Hydroformed TT
SINZ Chromoly Race Fork 1 1/8”
1 1/8” Thread-less Alloy cap
SINZ Alloy 5.5” SINZ Pro Lite 50mm
SINZ 130mm Sticky Grips
SINZ Alloy Mini Combo
DNP 16 “T” SINZ 3 pc 165mm Chromly with Sealed Sealed Semi Cartridge
Junior XL 21” 6061 Hydro-formed TT
SINZ Chromoly Race Fork 1”
1” Threadless Alloy cap
SINZ Alloy 4” SINZ Mini Lite 45mm
SINZ 115mm Sticky Grips
SINZ Alloy Mini Combo
DNP 16“T” SINZ 3 pc 155mm Chromly with Sealed Sealed Semi Cartridge
Mini XL 21” 6061 Hydroformed TT
SINZ Chromoly Race Fork 1”
1” Threadless Alloy cap
SINZ Alloy 2.5” SINZ Mini Lite 40mm
SINZ 115mm Sticky grips
SINZ Alloy Mini Combo
DNP 16“T” SINZ 3 pc 140mm Chromly with Sealed Sealed Semi Cartridge
Mini 21” 6061 Hydroformed TT
SINZ Chromoly Race Fork 1 1/8”
1” Threadless Alloy cap
SINZ Alloy 2.5” SINZ Mini Lite 40mm
SINZ 92mm Sticky grips
SINZ Alloy Mini Combo
DNP 16“T” SINZ 3 pc 125mm Chromly with Sealed Sealed Semi Cartridge
Factory Bikes Sizing ChartModle Frame Fork Headset Handlebar Stem Grips Saddle/Post Freewheel Crankset/BB Sets
Pro Cru 21” 6061 Hydroformed TT
SINZ Stealth Carbon Fiber Pro 1 1/8”
SINZ Sealed Bearing
SINZ Chromoly 5.5” SINZ Pro Lite 50mm
SINZ 130mm Sticky grips
THE Pivotal/ SINZ Alloy
Cassette 18“T” SINZ 2 pc 180mm Chromly with Sealed Bearings
Pro XXL 21.5” 6061 Hydroformed TT
SINZ Stealth Carbon Fiber Pro 1 1/8”
SINZ Sealed Bearing
SINZ Chromoly 8” SINZ Pro Lite 50mm
SINZ 130mm Sticky grips
THE Pivotal/ SINZ Alloy
Cassette 16“T” SINZ 2 pc 180mm Chromly with Sealed Bearings
Pro XL 21” 6061 Hydroformed TT
SINZ Stealth Carbon Fiber Pro 1 1/8”
SINZ Sealed Bearing
SINZ Chromoly 8” SINZ Pro Lite 50mm
SINZ 130mm Sticky grips
THE Pivotal/ SINZ Alloy
Cassette 16“T” SINZ 2 pc 180mm Chromly with Sealed Bearings
Pro 20.5” 6061 Hydroformed TT
SINZ Stealth Carbon Fiber Pro 1 1/8”
SINZ Sealed Bearing
SINZ Chromoly 7.5” SINZ Pro Lite 50mm
SINZ 130mm Sticky grips
THE Pivotal/ SINZ Alloy
Cassette 16“T” SINZ 2 pc 175mm Chromly with Sealed Bearings
Expert XL 20” 6061 Hydroformed TT
SINZ Stealth Carbon Fiber Pro Lite 1 1/8”
SINZ Sealed Bearing
SINZ Chromoly 5.5” SINZ Pro Lite 50mm
SINZ 130mm Sticky grips
SINZ Alloy Mini Combo
Cassette 16“T” SINZ 2 pc 165mm Chromly with Sealed Bearings
67
Chainwheel Brake Sets Pedals Chain Hubs Rims Tensioners Tyers
BMX Alloy 41t SINZ Alloy with Delux Casing
SINZ Pro Platform Replaceable Pins
SINZ Chrome 1/2”x3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 24”x1.75”
SINZ Expert ITS MK2 F/24”x1.85” R/24”x1.75”
BMX Alloy 44t SINZ Alloy with Delux Casing
SINZ Pro Platform Replaceable Pins
SINZ Chrome 1/2”x3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 20”x1.75”
SINZ Expert ITS MK2 F/20”x2.0” R/20”x1.75”
BMX Alloy 44t SINZ Alloy with Delux Casing
SINZ Pro Platform Replaceable Pins
SINZ Chrome 1/2”x3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 20”x1.75”
SINZ Expert ITS MK2 F/20”x2.0” R/20”x1.75”
BMX Alloy 44t SINZ Alloy with Delux Casing
SINZ Pro Platform Replaceable Pins
SINZ Chrome 1/2”x3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 20”x1.75”
SINZ Expert ITS MK2 F/20”x1.75” R/20”x1.50”
BMX Alloy 42t SINZ Alloy with Delux Casing
SINZ Pro Platform Replaceable Pins
SINZ Chrome 1/2”x3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 20”x1 3/8”
SINZ Expert ITS MK2 20”x1 3/8”
Chainwheel Brake Sets Pedals Chain Hubs Rims Tensioners Tyers
BMX Alloy 41t SINZ Alloy with Delux Casing
SINZ Pro Platform SINZ Chrome 1/2”x 3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 24”x1.75”
SINZ Expert ITS MK2 F/24”x1.85” R/24”x1.75”
BMX Alloy 44t SINZ Alloy with Delux Casing
SINZ Pro Platform SINZ Chrome 1/2”x 3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 20”x1.75”
SINZ Expert ITS MK2 F/20”x2.0” R/20”x1.75”
BMX Alloy 44t SINZ Alloy with Delux Casing
SINZ Pro Platform SINZ Chrome 1/2”x 3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 20”x1.75”
SINZ Expert ITS MK2 F/20”x1.75” R/20”x1.5”
BMX Alloy 42t SINZ Alloy with delux casing
SINZ Alloy Pro Platform SINZ Chrome 1/2”x 3/32”
SINZ Alloy Sealed Bearing
SINZ 32˚/36˚ 20”x1 3/8”
SINZ Expert ITS MK2 20”x1 3/8”
BMX Alloy 40t SINZ Alloy with delux casing
SINZ Alloy Mini Platform SINZ Chrome 1/2”x 3/32”
SINZ Alloy Sealed Bearing
SINZ 20˚/24˚ 20”x1 1/8”
SINZ Expert ITS MK2 20”x1 1/8”
BMX Alloy 36t SINZ Alloy with delux casing
SINZ Alloy Mini Platform SINZ 1/2”x 3/32” SINZ Alloy Sealed Bearing
SINZ 20˚/24˚ 20”x1 1/8”
SINZ Expert ITS MK2 20”x1 1/8”
BMX Alloy 34t SINZ Alloy with delux casing
SINZ Alloy Mini Platform SINZ 1/2”x 3/32” SINZ Alloy Sealed Bearing
SINZ 20˚/24˚ 20”x1” SINZ Expert ITS MK2 20”x1”
pho
to b
y: S
pen
cer M
oret
68
VSI PRODUCTS LIMITED WARRANTYVSI PRODUCTS warrants the replacement of original components sold as INTENSE BMX, SINZ, SINZ ELITE, THE, EYE, SPEED, ITS, VIGOR due to defects in materials and/or workmanship according to the following conditions and limitations:
1. The warranty period is of one year from the date of purchase, with the following exception: 1.1. Bicycle Frames: have a 2 year limited warranty period2. Labor and transportation charges are not included. They are the responsibility of the product owner. 3. This warranty is limited to the original retail purchaser of the product. 4. Dated proof of purchase is required to make a warranty claim.5. Normal wear, accident, abuse, neglect, natural breaking, fading of colors and materials, improper assembly, improper maintenance by other than an authorized dealer, or use of parts or devices not consistent with the use originally intended for the product as sold are not covered by this warranty. 6. Bending of frames, forks, handlebars, seat-posts, cranks, axels and rims is excluded in this warranty. Bending is a sign of abuse inconsistent with the products’ intended use, and is therefore not covered under this limited warranty. 7. Bicycles must be assembled and adjusted by a retailer authorized by VSI PRODUCTS or its authorized distributor or agent in order to validate the warranty. Bicycles not assembled by an authorized dealer are expressly excluded from this limited warranty. 7.1. Any warranty claims must be made through an authorized dealer, distributor or agent. For information regarding the nearest dealer, distributor or agent, write or call VSI PRODUCTS (562) 407-2184.8. This warranty is limited to replacing the defective parts without charge and VSI PRODUCTS shall in no event be responsible for consequential or special damages.9. In the event that the original part is not available, VSI PRODUCTS, or its authorized dealer, distributor or agent reserve the right to substitute said part with one of similar nature and value.10. This warranty is expressly in lieu of any other warranties. Any implied warranty, including any warranty of merchantability of fitness, shall be limited in duration to the duration of the express warranty set forth herein. This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.
VSI PRODUCTS16918 Edwards RdCerritos, CA 90703
VSI Partners with
Go to Shopatron. com for program information and sign up.
70