-
7/31/2019 2012 Vietnam MCU Contest Application Form
1/3
2012 TI Vietnam MCU Design Contest
University: Danang University of Technology
Group name: WindBK
Team Members: Name, Educational Background, E-Mail Address
Nguy n V n Ng c,Master Student of Danang University of
Technology, [email protected]
Tr ng Qu c Huy, Student of Danang University of Technology,
[email protected]
Advisor: Name, Title, E-Mail:
Nguy n Th Ngh a, Specialist of Advanced Program,
[email protected] Person (Very Important):
E-Mail: [email protected] Zip Code: 084
Cell: +84915454168
Phone:____________________________________
Address: K129 Pham Nhu Xuong, Lien Chieu, Danang
*********************************************************************
Design Information (Very Important)
Project Name:System of Measuring Pulse Oximeter with
Monitoring via Internet
MCU Part Number: Stellaris ARM Cortex M3
Design Briefing (250 - 500 words):
Our design is the equipment used in the hospital. This has
three
main functions; measuring data, monitoring via the Internet
and
storing the data as patient record.
In measurement, our design will support three kinds of data.
The first one is heart rate while the second is Pulse
Oximeter.
Room temperature is also attached to measurement. The design
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]
-
7/31/2019 2012 Vietnam MCU Contest Application Form
2/3
also supports the alarming and warning mode. This will tell
the
patient whether their health is good or bad.
After measurement, these data will be displayed in the LCD
of
the center. Meanwhile, our design also supports uploading
these data to the webserver. Thanks to this, doctor can
monitor
data of patient through the Internet or just LAN network. In
the
webserver, we also support many extra tools for doctor to
conveniently manage the measurement.
Our design also supports memory to store the information of
patient. The format of the data includes name of doctor and
patient, date of measurement and all measured data of
patient.
When needed, doctor or patient can easily review the
measured
data.
The design can be divided into two parts. The first part is
the
base which is connected to the internet to support
webserver.
The second part is measure device which has function ofmeasuring
all data above. These two parts are connected by two
module of wireless. The module will transmit all data from
one
side to other and vice versa.
Moreover, if time is possible, we improve the multi channels
of
measurement. This means doctor can monitor the measuring
data of many patients at the same time.
In the plan of designing, we propose to choose the kit
Stellaris
Cortext M3 LM3S8962 because of its supported features. With
LM3S8962, we can easily control Ethernet, memory and soon.
In
-
7/31/2019 2012 Vietnam MCU Contest Application Form
3/3
the measurement, we can reference an application of TI Pulse
Oximeter.In wireless network, we use two modules D-MI32.
Please send your entry form to:
North Region:
1. Mr. Xuan Kien Nguyen ([email protected])
2. Or Ms. Do Hanh ([email protected])Central Region:
1. Mr. Thai Hung Le ([email protected])2. Or
South Region:
1. Mr. Quoc Nguyen ([email protected])
2. Or Ms. Ho Thanh Phuong ([email protected])
If any questions, please contact:
Xuan Kien Nguyen at 84 - 988569899 , or
[email protected].
Thai Hung Le at 84 - 903 143 171, or [email protected].
Quoc Nguyen at 84-983563518 , or [email protected].
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]
