2011 forestry full line-up

DKD1729 Litho in U.S.A. (11-04)

DKD1729 Page 68

F O R E S T R Y E Q U I P M E N T

2011 FlEET

DKD1729 Page 2 DKD1729 Page 3

You have one of the toughest jobs in the world. Which is why John Deere builds a complete line of top-quality, versatile, and rugged forestry equipment that gets the job done with roaring productivity, end to end.

The way we look at it, productivity is not just about how many hours you spend on the job. It’s about how much work you get out of every one of those hours. With our full-line forestry solutions, you get more productivity per hour and lower operating costs from high-quality equipment that simply refuses to quit.

It all comes down to making a tough job just that much easier. And making you more productive and more profitable, end to end, start to finish. At John Deere, We’re For loggers.

Whatever it takes.

ContentsFeller Bunchers, Tracked 4

Feller Bunchers, Wheeled 9

Forestry Swing Machines 11

Forwarders 18

Harvesters, Tracked 22

Harvesters, Wheeled 26

Knuckleboom Loaders 29

Skidders 31

John Deere Attachments 35

Waratah Attachments 39

Compact Track Loaders 44

Crawler Dozers 46

Excavators 48

Motor Graders 50

Skid Steers 52

Wheel Loaders 54

Customer Personal Service 58

Notes 63

www.JohnDeere.com/forestry

2

3


More bang for the buck.Want a power-packed machine that won’t disappoint when it comes to high-production logging in tough terrain? That’s the hard-won promise of our tracked feller bunchers. The proof is at your feet. Their optional in-the-floor window gives you a sightline to the ground. In fact, the whole cab delivers high visibility. See for yourself just what these machines — with their long reaches and impres-sive productivity — can do for you.

Feller Bunchers, Tracked

Tracked FellerBunchers 753JEngine 180 kW (241 hp) John Deere 6081H turbocharged diesel with electronically

controlled fuel injection

Forestry undercarriage

(8) 203-mm (8.0-in.) pitch tractor-type rollers per side frame; available with 203-mm (8.0-in.) narrow gauge undercarriage

Ground clearance

730 mm (29 in.)

Tractive effort 256 kN (57,600 lbf.)

Track shoes/ground pressure

Standard: Double grouser, 610 mm (24 in.), 51.5 kPa (7.5 psi); Optional: Up to triple grouser, 914 mm (36 in.), 36.2 kPa (5.3 psi)

Felling head High-speed disc saw with ±15-deg. side tilt wrist Standard: FS20 high-accumulation, single-post, side pocket

Boom performance

Lift capacity (with bare pin @ full reach) standard boom: 4720 kg (10,400 lb.)

Standard boommax. reach

8.4 m (27 ft. 6 in.)

Weight, less attachment

23 680 kg (52,210 lb.)

Shipping dimensions

(H) 3.45 m (11 ft. 4 in.) (W) with 610-mm (24-in.) track shoes: 3.18 m (10 ft. 5 in.) (L) 10.03 m (32 ft. 11 in.) with continuous rotating upperstructure


4

5



Tracked FellerBunchers 759J 903KEngine 180 kW (241 hp) John Deere 6081H

turbocharged diesel224 kW (300 net peak power) John Deere PowerTech™ Plus 6090H


(8) 203-mm (8.0-in.) pitch tractor-type rollers per side frame


Ground clearance

759 mm (30 in.) 735 mm (29 in.)

Tractive effort 256 kN (57,400 lbf.) 331 kN (74,300 lbf.)

Track shoes/ ground pressure

Standard: Single grouser, 711 mm (28 in.), 50.8 kPa (7.4 psi)

Single grouser, clipped corner, heavy duty: 610 mm (24 in.), 59.6 kPa (8.6 psi) or 710 mm (28 in.), 51.8 kPa (7.5 psi); Double grouser, heavy duty: 610 mm (24 in.), 59.6 kPa (8.6 psi) or 760 mm (30 in.), 48.7 kPa (7.1 psi)

Felling head ±15-deg. side tilt wrist; Standard: FS20 single-post, side pocket

FS22B or FR22B with 559-mm (22.0-in.) cutting capacity

Boom performance




8.4 m (27 ft. 6 in.) 6.71 m (22 ft. 0 in.)

Weight, less attachment

27 180 kg (59,940 lb.) 29 570 kg (65,210 lb.)

Shipping dimensions

(H) 3.80 m (12 ft. 5 in.) (W) with 610-mm (24-in.) track shoes: 3.05 m (10 ft. 0 in.) (L) 9.30 m (30 ft. 6 in.) with continuous rotating and leveling upperstructure


Tracked FellerBunchers

909K 953K

Engine 224 kW (300 peak power)John Deere PowerTech™ Plus6090H

246 kW (330 net peak power) John Deere PowerTech Plus 6090H




Ground clearance

759 mm (30 in.) 735 mm (29 in.)



Single grouser, clipped corner, heavy duty: 610 mm (24 in.), 67.9 kPa (9.8 psi) or 710 mm (28 in.), 58.9 kPa (8.5 psi); Double grouser, heavy duty: 610 mm (24 in.), 67.8 kPa (9.8 psi)

Single grouser, clipped corner, heavy duty: 610 mm (24 in.), 63.1 kPa (9.2 psi) or 710 mm (28 in.), 54.8 kPa (7.9 psi); Double grouser, heavy duty: 610 mm (24 in.), 63.0 kPa (9.1 psi) or 760 mm (30 in.), 51.5 kPa (7.5 psi)

Felling head FS22B or FR22B with 559-mm (22-in.) cutting capacity

FR24B with 622-mm (24.5-in.) cutting capacity

Boom performance




6.71 m (22 ft. 0 in.) 6.71 m (22 ft. 0 in.)

Weight, lessattachment

35 530 kg (78,350 lb.) 31 280 kg (68,980 lb.)

Shipping dimensions

(H) 4.0 m (13 ft. 2 in.) (W) with 610-mm (24-in.) track shoes: 3.33 m (10 ft. 11 in.) (W) with 711-mm (28-in.) track shoes: 3.43 m (11 ft. 3 in.) (L) 9.0 m (29 ft. 6 in.) with continuous rotating and leveling upperstructure


6

7


Tracked FellerBunchers 959KEngine 246 kW (330 peak power)

John Deere PowerTech™ Plus 6090H



Ground clearance

769 mm (30 in.)




Felling head FR24B with 622-mm (24.5-in.) cutting capacity

Boom performance



6.71 m (22 ft. 0 in.)


36 780 kg (81,090 lb.)

Shipping dimensions

(H) 4.0 m (13 ft. 2 in.) (W) with 610-mm (24-in.) track shoes: 3.33 m (10 ft. 11 in.) (W) with 711-mm (28-in.) track shoes: 3.43 m (11 ft. 3 in.) (L) 9.0 m (29 ft. 6 in.) with continuous rotating and leveling upperstructure

Always up for a challenge.You’ve got to be able to depend on your equipment. All the time. That’s why we build our wheeled feller bunchers with robust hydraulic and electrical systems and best-in-class axles. So bring on the big bunches — small stems or large timber. We’re ready, even when the conditions are hard to handle.

Feller Bunchers, Wheeled


8

9

10

11


Wheeled FellerBunchers

643K 843K

Engine 141 kW (189 hp) John Deere 6068H turbocharged diesel

181 kW (243 hp) John Deere 6068H turbocharged diesel

Transmission Infinitely variable hydrostatic with 2-speed gearbox

Infinitely variable hydrostatic with 2-speed gearbox

Steering Frame articulation: 90-deg. stop- to-stop; telescopic, tilting steering column and spinner knob or optional lever steering

Frame articulation: 90-deg. stop- to-stop; telescopic, tilting steering column and spinner knob or optional lever steering

Wheelbase 2794 mm (110 in.) 2794 mm (110 in.)

Ground pressure 73.1 kPa (10.6 psi) on 28L-26 14-ply tires

77.2 kPa (11.2 psi) on 28L-26 14-ply tires

Weight, with head 14 910 kg (32,870 lb.) with FD45 15 708 kg (34,630 lb.) with FD22B

Felling heads FD22B single post and FD45 twin post

FD22B single post

Shipping dimensions (with standard saw)

Standard wheelbase: 2794 mm (110 in.) (W) 2920 mm (115 in.) (L) 7420 mm (24 ft. 4 in.) (H) 3250 mm (10 ft. 8 in.) Maximum height of saw head pin: 2490 mm (8 ft. 2 in.) Ground clearance: 480 mm (19 in.)

Standard wheelbase: 2794 mm (110 in.) (W) 2920 mm (115 in.) (L) 7420 mm (24 ft. 4 in.) (H) 3250 mm (10 ft. 8 in.) Maximum height of saw head pin: 2450 mm (8 ft. 0.3 in.) Ground clearance: 480 mm (19 in.)

Top of the food chain.After years in dense woods, our forestry swing machines have developed some seriously tough traits. Their powerful swing systems, impressive horsepower, and enhanced hydraulic systems promise increased productivity. And you can use them as you see fit. Log loaders or road builders, processor/harvesters, or stroke delimber carriers. However you put them to work, they prove that anything else is just prey.

Forestry Swing Machines


12

13


Road Builders 2954D 3754DEngine (flywheel) 145 kW (194 hp) 220 kW (296 hp)

Total combined pump flow 496 L/m (131 gpm) 608 L/m (160.6 gpm)

Swing speed 8.7 rpm 11 rpm

Swing torque 111 194 Nm (82,012 lb.-ft.) 111 194 Nm (82,012 lb.-ft.)

Fuel capacity 1050 L (277 gal.) 1050 L (277 gal.)

Operating weight 34 253 kg (75,515 lb.) 41 196 kg (90,822 lb.)

Drawbar pull 30 812 kg (67,929 lb.) 36 102 kg (79,590 lb.)

Shipping dimensions (H) 3.82 m (12 ft. 6 in.) (W) 3.43 m (11 ft. 3 in.) (L) 10.86 m (35 ft. 8 in.)

(H) 3.37 m (11 ft. 1 in.) (W) 3.49 m (11 ft. 6 in.) (L) 11.21 m (36 ft. 9 in.)

Road Builders 2154D 2454DEngine (flywheel) 125 kW (168 hp) 145 kW (194 hp)

Total combined pump flow 472 L/m (124.6 gpm) 496 L/m (131 gpm)

Swing speed 12.6 rpm 12.6 rpm



Operating weight 26 660 kg (58,775 lb.) 31 218 kg (68,824 lb.)


Shipping dimensions (H) 2.93 m (9 ft. 7 in.) (W) 3.36 m (11 ft. 0 in.) (L) 9.86 m (32 ft. 4 in.)



14

15


Log Loaders 2154D 2454DEngine(flywheel)

125 kW (168 hp) 145 kW (194 hp)

Total combined pump flow

472 L/m (124.6 gpm) 496 L/m (131 gpm)




Operating weight

Fixed heel: 29 638 kg (65,342 lb.) Live heel: 30 250 kg (66,690 lb.) Power-clam: 30 733 kg (67,755 lb.) Butt-N-Top: 30 733 kg (67,755 lb.)

Fixed heel: N/A Live heel: 35 300 kg (77,823 lb.) Power-clam: 35 370 kg (77,978 lb.) Butt-N-Top: 35 370 kg (77,978 lb.)


Maximum reach Fixed heel: 10.31 m (33 ft. 10 in.) Live heel: 10.98 m (36 ft. 0 in.) Power-clam: 9.94 m (32 ft. 7 in.)Butt-N-Top: 9.94 m (32 ft. 7 in.)

Fixed heel: N/A Live heel: 11.67 m (38 ft. 3 in.) Power-clam: 10.68 m (35 ft. 0 in.)Butt-N-Top: 10.68 m (35 ft. 0 in.)

Lift capacity @ 20 ft. out @ ground level, with attachment

8822 kg (19,450 lb.) 10 340 kg (22,796 lb.)

Shipping dimensions



Log Loaders 2954D 3754DEngine(flywheel)

145 kW (194 hp) 220 kW (296 hp)


496 L/m (131 gpm) 608 L/m (160.6 gpm)

Swing speed 8.7 rpm 11 rpm

Swing torque 111 194 Nm (82,012 lb.-ft.) Standard: 111 194 Nm (82,012 lb.-ft.)Optional: 148 462 Nm (109,500 lb.-ft.)


Operating weight

Fixed heel: N/A Live heel: 41 050 kg (90,500 lb.) Power-clam: 41 100 kg (90,610 lb.) Butt-N-Top: 41 100 kg (90,610 lb.)

Fixed heel: N/A Live heel: 46 108 kg (101,651 lb.) Butt-N-Top: 46 262 kg (101,990 lb.)


Maximum reach Fixed heel: N/A Live heel: 12.60 m (41 ft. 4 in.) Power-clam: 11.12 m (36 ft. 6 in.)Butt-N-Top: 11.12 m (36 ft. 6 in.)

Fixed heel: N/A Live heel: 13.12 m (43 ft. 0 in.) Power-clam: 11.70 m (38 ft. 4 in.)Butt-N-Top: 11.70 m (38 ft. 4 in.)

Lift capacity @ 20 ft. out @ ground level, with attachment

12 260 kg (27,029 lb.) 17 554 kg (38,700 lb.)

Shipping dimensions






16

17

Delimber Carriers 2154D 2454DEngine (flywheel) 125 kW (168 SAE net hp)

Tier 3-compliant John Deere PowerTech™ E 6068H

145 kW (194 SAE net hp)Tier 3-compliant John Deere PowerTech E 6068H


472 L/m (124.6 gpm) 496 L/m (131 gpm)




Operating weight(less attachment)

22 793 kg (50,250 lb.) 26 719 kg (58,905 lb.)

Tractive effort 22 634 kg (49,920 lb.) 25 435 kg (56,074 lb.)

Shipping dimensions (less attachment)



Processors 2154D 2454D 2954DEngine(flywheel)

125 kW (168 hp) 145 kW (194 hp) 145 kW (194 hp)


472 L/m (124.6 gpm) 496 L/m (131 gpm) 496 L/m (131 gpm)

Swing speed 12.6 rpm 12.6 rpm 8.7 rpm

Swing torque 74 606 Nm (54,857 lb.-ft.) 77 140 Nm (56,896 lb.-ft.) 111 194 Nm (82,012 lb.-ft.)

Fuel capacity 1049 L (277 gal.) 1050 L (277 gal.) 1050 L (277 gal.)

Operating weight

27 864 kg (61,430 lb.) 33 490 kg (73,833 lb.) 36 900 kg (81,351 lb.)

Drawbar pull 22 634 kg (49,900 lb.) 25 435 kg (56,075 lb.) 30 812 kg (67,929 lb.)

Shipping dimensions






Get more from your long haul.Load size, distance, and terrain don’t matter to our E-Series Forwarders. They can take on the big loads day after day in any forest without saddling you with undue fuel costs. Our compact models are great for dense thinnings and cut-to-length logging. And the electronics on our largest forwarder never fail to impress. Rely on these forwarders to go the distance on productivity.

Forwarders

Forwarders 1010EEngine 115.5 kW (155 hp) John Deere 4045H, turbocharged, charge air cooled,

4 cylinders, 4.5-L displacement

Powertrain Hydrostatic-mechanical, 2-speed gearbox

Hydraulics Load sensing

Operator’s cab Rotating (standard) and leveling (optional)

Boom CF5, reach 7.2 m (23 ft. 6 in.), 8.5 m (27 ft. 9 in.), or 10 m (32 ft. 8 in.)

Load rating 11 tons

Weight 14 700–16 500 kg (32,407–36,376 lb.), depending on equipment

Shipping dimensions

(W) 0000 mm (000 in.) (L) 0000 mm (00 ft. 0 in.) (H) 0000 mm (0 ft. 0 in.)

18

19


20

21www.JohnDeere.com/forestry

Forwarders 1110E 1210EEngine John Deere 6068H, turbocharged,

charge air cooled, 6 cylinders, 6.8-L displacement 136 kW (183 hp)

John Deere 6068H, turbocharged, charge air cooled, 6 cylinders, 6.8-L displacement 140 kW (189 hp)

Powertrain Hydrostatic-mechanical,2-speed gearbox

Hydrostatic-mechanical,2-speed gearbox

Hydraulics Load sensing Load sensing


Rotating (standard) and leveling (optional)

Boom CF5, 7.2 m (23.6 ft.), 8.5 m (27.9 ft.), or 10 m (32.8 ft.)

CF7, 7.2 m (23.6 ft.), 8.5 m (27.9 ft.), or 10 m (32.8 ft.)

Load rating 12 tons 14 tons

Weight 15 500–17 300 kg(34,170–38,140 lb.)depending on equipment

16 200–18 100 kg (35,720–39,900 lb.)depending on equipment

Shipping dimensions



Forwarders 1510E 1910EEngine John Deere 6068H, turbocharged,

charge air cooled, 6 cylinders, 6.8-L displacement 145 kW (195 hp)

John Deere 6090H, turbocharged, charge air cooled, 6 cylinders, 9.0-L displacement186 kW (249 SAE hp)

Powertrain Hydrostatic-mechanical,2-speed gearbox

Hydrostatic-mechanical,2-speed gearbox

Hydraulics Load sensing Load sensing


Rotating (standard) and leveling (optional)

Boom CF7, 7.2 m (23.6 ft.), 8.5 m (27.9 ft.), or 10 m (32.8 ft.)

CF8, 8.5 m (27.9 ft.)

Load rating 15 tons 19 tons

Weight 16 900–17 900 kg(37,260–39,460 lb.) depending on equipment

19 050–21,800 kg (42,125 –48,080 lb.) depending on equipment

Shipping dimensions





Earn your bragging rights.Every John Deere tracked harvester is a big performer with a long reach — in an easy-to-move, rugged carrier. Which means you can weave your way into dense stands and still have room to command the boom. With perfectly matched hydraulics, and unmatched horsepower and swing torque, you will produce more logs, more quickly. Installed with a Waratah head and outfitted with a robust harvester boom and arm set providing powerful lift capacity and a superior working envelope, these workhorses will keep you in the forest working longer and more efficiently.

Harvesters, Tracked

22

23

Tracked Harvesters 703JH 753JHEngine 135 kW (181 hp) John Deere 6081H

turbocharged diesel with electronically controlled fuel injection

180 kW (241 hp) John Deere 6081H turbocharged diesel with electronically controlled fuel injection


(8) 203-mm (8.0-in.) pitch tractor-type rollers per side frame; standard with narrow-gauge undercarriage

(8) 203-mm (8.0-in.) pitch tractor-type rollers per side frame; available with 203-mm (8.0-in.) narrow-gauge undercarriage

Ground clearance 730 mm (29 in.) 730 mm (29 in.)



Standard: Double grouser, 610 mm (24 in.), 50.3 kPa (7.3 psi); Optional: Up to triple grouser 914 mm (36 in.), 35.4 kPa (5.1 psi)

Standard: Double grouser, 610 mm (24 in.), 50.6 kPa (7.3 psi) or 760 mm (30 in.), 41.3 kPa (6.0 psi); Optional: Up to triple grouser 914 mm (36 in.), 35.6 kPa (5.2 psi)

Harvester head Waratah HTH616C with 508-mm (20-in.) cutting capacity; other Waratah head options available

Waratah HTH622B with 762-mm (30-in.) cutting capacity; other Waratah head options available

Boom performance

Maximum lift capacity (bare pin @ full reach) 3980 kg (8,780 lb.)


Max. boom reach 8.5 m (27 ft. 10 in.) 8.5 m (27 ft. 10 in.)

Weight, less harvesting head

23 120 kg (50,960 lb.) 23 256 kg (51,280 lb.)

Shipping dimensions

(H) 3.4 m (11 ft. 2 in.) (W) with 6.1-m (24-in.) track shoes: 2.91 m (9 ft. 7 in.) (W) with 9.1-m (36-in.) track shoes: 3.2 m (10 ft. 7 in.) (L) 9.69 m (31 ft. 10 in.) with continuous rotating upperstructure

(H) 3.45 m (11 ft. 4 in.) (W) with 6.1-m (24-in.) track shoes: 3.15 m (10 ft. 4 in.) (W) with 9.1-m (36-in.) track shoes: 3.4 m (11 ft. 4 in.) (L) 9.69 m (31 ft. 10 in.) with continuous rotating upperstructure



24

25

TrackedHarvesters 759JHEngine 180 kW (241 hp) John Deere 6081H turbocharged diesel with electronically

controlled fuel injection



Ground clearance 759 mm (30 in.)



Standard: Double grouser, 610 mm (24 in.), 57.7 kPa (8.4 psi); Optional: Up to single grouser 710 mm (28 in.), 50.0 kPa (7.3 psi)

Harvester head Waratah HTH622B with 762-mm (30-in.) cutting capacity

Boom performance


Max. boom reach 8.5 m (27 ft. 10 in.)


26 760 kg (59,000 lb.)

Shipping dimensions

With fixed cab: (H) 3.93 m (12 ft. 10 in.) (W) 2/6.1-m (24-in.) track shoes: 3.05 m (10 ft. 0 in.) (L) 9.49 m (31 ft. 3 in.) with continuous rotating and leveling upperstructure

TrackedHarvesters 903KH 909KHEngine 224 kW (300 hp) John Deere

PowerTech™ Plus 6090H224 kW (300 hp) John Deere PowerTech Plus 6090H




Ground clearance 735 mm (29 in.) 769 mm (30 in.)



Single grouser, clipped corner, heavy duty: 610 mm (24 in.), 60.2 kPa (8.7 psi) or 710 mm (28 in.), 52.4 kPa (7.6 psi); Double grouser, heavy duty: 610 mm (24 in.), 60.2 kPa (8.7psi) or760 mm (30 in.), 49.2 kPa (7.1 psi)


Harvester head HTH624C with 750-mm (29.5-in.) cut-ting capacity, optional heads available

HTH624C with 750-mm (29.5-in.) cutting capacity, optional heads available

Boom performance



Max. boom reach 8.84 m (29 ft. 0 in.) 8.84 m (29 ft. 0 in.)


29 880 kg (65,890 lb.) 35 850 kg (79,040 lb.)

Shipping dimensions

With fixed cab: (H) 3.93 m (12 ft. 10 in.) (W) 2/6.1-m (24-in.) track shoes: 3.05 m (10 ft. 0 in.) (L) 9.49 m (31 ft. 3 in.) with continuous rotating upperstructure

With fixed cab: (H) 4.0 m (13 ft. 2 in.) (W) with 610-mm (24-in.) track shoes: 3.33 m (10 ft. 11 in.) (W) with 711-mm (28-in.) track shoes: 3.43 m (11 ft. 3 in.) (L) 9.00 m (29 ft. 6 in.) with continuous rotating and leveling upperstructure



Wheeled Harvesters 1070E 1170EEngine John Deere 6068HTJ turbocharged,

charge air cooled136 kW (182 hp)

John Deere 6068HTJ turbocharged, charge air cooled6 cylinders, 6.8-L displacement145 kW (194 hp)

Powertrain Hydrostatic-mechanical, 2-speed gearbox Hydrostatic-mechanical, 2-speed gearbox

Front and rear axles

Hydromechanical differential lock at the front and the rearFront: Balanced portal bogieRear: Single rigid axle

Hydromechanical differential lock at the front and the rearFront: Balanced portal bogieRear: Single rigid axle

Front and rear tires

Rim size Front: 22.5 in. Rear: 34 in. or 26.5 in.

Width600-Series Tires:105 in.

650-Series Tires:107 in.


Rim sizeFront: 24.5 in. Rear: 34 in.



Harvester heads H752HD, H412, H754, and H414 H752HD, H412, H754, and H414

Boom 180S, Maximum reach 8.6 m (28.3 ft.) / 10 m (32.9 ft.) / 10.8 m (35.5 ft.)Slewing angle 220 deg.Tilt angle, backward/forward –14 deg./+28 deg.

CH6, Maximum reach 10 m (32.8 ft.) / 11.3 m (37.1 ft.) Slewing angle 220 deg.Tilt angle, backward/forward –14 deg./+28 deg.

Operator’s cab Leveling and rotating (standard),fixed cab (optional)

Leveling and rotating (standard),fixed cab (optional)

Weight 15,550 kg (34,180 lb.) 17,900 kg (39,460 lb.)

Shipping dimensions

(L) 11.34 m (37 ft. 2 in.)(W) See tires(H) with fixed cab: 3.63 m (11 ft. 11 in.)(H) with leveling cab: 3.73 m (12 ft. 3 in.)

(L) 11.72 m (38 ft. 5 in.)(W) See tires(H) with fixed cab: 3.66 m (12 ft.)(H) with leveling cab: 3.76 m (12 ft. 4 in.)

Brainy and strong.Our wheeled harvesters are designed to give you choices, regardless of your application. John Deere harvesters deliver tried-and-true mobility and produc-tivity in dense stands and final fellings — whether you’re doing selective cutting and thinning, or working with large-diameter trees in tough terrain. Even on steep slopes.

Now that’s what we call smart.

Harvesters, Wheeled

26

27


28

29

Wheeled Harvesters 1270E 1470EEngine John Deere 6090HTJ turbocharged,

charge air cooled170 kW (228 hp)

John Deere 6090HTJ turbocharged, charge air cooled190 kW (255 hp)

Powertrain Hydrostatic-mechanical, 2-speed gearbox

Hydrostatic-mechanical, 2-speed gearbox

Front and rear axles

Hydromechanical differential lockat the front and the rearFront: Balanced portal bogieRear: Single rigid axle

Hydromechanical differential lockat the front and the rearFront: Balanced portal bogieRear: Single rigid axle

Front and rear tires

Rim size Front: 26.5 in. Rear: 34 in.



Rim size Front: 26.5 in. Rear: 34 in.



Harvester heads H752HD, H270, H754, H414, and H480C H270, H480C, and H290

Boom CH7 parallel action Maximum reach 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.7 m (38.4 ft.)Slewing angle 220 deg.Tilt angle, backward/forward –15 deg./+28 deg.

CH8 parallel action Maximum reach 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11 m (36.1 ft.) Slewing angle 220 deg.Tilt angle, backward/forward –15 deg/+28 deg.

Operator’s cab Leveling and rotating (standard),fixed cab (optional)

Leveling and rotating (standard),fixed cab (optional)

Weight 19,250 kg (42,450 lb.) 20,700 kg (45,644 lb.)

Shipping dimensions



Make every drop count.

Knuckleboom Loaders

Heavy-duty construction. High swing torque. Exceptional boom strength. Horsepower. Hydraulic pump flow. Lift capacity. The 437D is the most fuel-efficient machine in the business. Need we say more? Our loaders keep your pace steady — day after day.



KnuckleboomLoaders 335D 437D Engine 129 kW (173 hp) John Deere

6068 HTJ56 PowerTech™ E129 kW (173 hp) John Deere 6068 HTJ56 PowerTech E

Hydraulics Triple-gear pump assembly Tandem variable displacement,axial piston, load sensing

Reach 9.10 m (29 ft. 10 in.) 9.75 m (32 ft.)

Lift capacity 5858 kg (12,915 lb.) @ 3 m (10 ft.) 11 839 kg (26,101 lb.) @ 3 m (10 ft.)

Swing system 360-deg. continuous @ 8.43 rpm 360-deg. continuous @ 9.9 rpm

Swing torque 41 600 Nm (30,683 ft.-lb.) 48 809 Nm (36,000 ft.-lb.)

Drive 2-stage planetary gearbox with gear motor

2-stage planetary gearbox with piston motor

Controls Pilot levers, short stroke, low effort Pilot levers, short stroke, low effort


12 510 kg (27,580 lb.) 14 959 kg (32,980 lb.)

Shipping dimensions

(H) 4.09 m (13 ft. 5 in.) (W) 2.59 m (8 ft. 6 in.) (L) 11.36 m (36 ft. 10.5 in.)

(H) 4.09 m (13 ft. 5 in.) (W) 2.59 m (8 ft. 6 in.) (L) 11.84 m (38 ft. 10.4 in.)

30

31

While you’re at it, drive down fuel costs.You don’t log just one kind of terrain. Which is why we’ve built a whole host of skidders, the industry’s widest range of them. Just choose the size, power, and options you need. No matter which way you go, one thing will stay the same: fuel efficiency. Because with their long wheelbase and wide stance, our stable skidders go where you want them to go. They’ll pull faster. And they won’t shock you when you fill up the tank.

Skidders


32

33


Grapple Skidders 748H 848H Engine 141 kW (193 SAE gross hp)

PowerTech™ Plus 6068H, Tier 3149 kW (200 SAE gross hp)PowerTech Plus 6068H, Tier 3

Transmission Direct-drive PowerShift™ with brake declutch and optional Autoshift

Direct-drive PowerShift with optional Autoshift or lockup torque converter with optional Autoshift

Speeds 8 forward, 7 reverse Direct drive: 8 forward, 7 reverse; Lockup torque converter: 6 forward, 3 reverse

Dual-function grapples

Bunching: 3227 mm (127 in.) Thinning: 3302 mm (130 in.)

Bunching: 3302 mm (130 in.) Thinning: 3404 mm (134 in.)

Winch (Optional) Series 4000 bare-drum line pull up to 225.9 kN (50,786 lb.)

(Optional) Series 4000 bare-drum line pull up to 82.3 kN (18,505 lb.)

Weight 17 028 kg (37,540 lb.) 17 826 kg (39,300 lb.)

Shipping dimensions

With 30.5 x 32 tires: (W) 3.24 m (10 ft. 7.5 in.) (L) 8.07 m (26 ft. 5.8 in.) (H) with water-tank package: 3.30 m (10 ft. 10 in.)

With 35.5 x 32 tires: (W) 3.15 m (10 ft. 4 in.) (L) decking blade on ground to grapple: 9.03 m (29 ft. 7 in.) (H) with light package: 3.30 m (10 ft. 10 in.)

Grapple Skidders 548G-III 648HEngine 96 kW (129 SAE gross hp) John Deere

6068T, 6-cylinder diesel128 kW (172 SAE gross hp) PowerTech™ Plus 6068H, Tier 3

Power with torque-converter option

N/A 138 kW (185 gross hp)




Grapples Bunching 2160 mm (85 in.) Single- or dual-function grapples availableBunching: 2921 mm (115 in.)Thinning: 3175 mm (125 in.)

Winch (Optional) Series 4000 bare-drum line pull up to 155.81 kN (35,027 lb.)

(Optional) Series 4000 bare-drum line pull up to 193.2 kN (43,433 lb.)

Weight 10 746 kg (23,690 lb.) Direct drive with dual-function grapple: 14 638 kg (32,271 lb.) Lockup torque converter: 14 798 kg (32,624 lb.)

Shipping dimensions

With 23L x 26 tires, narrow: (W) 2.65 m (8 ft. 6 in.) (L) 6.33 m (20 ft. 9 in.)(H) 3.03 m (9 ft. 11 in.)

With 30.5 x 32 tires: (W) 3.24 m (10 ft. 7.5 in.) (L) 7.28 m (23 ft. 11 in.) (H) with water-tank package: 3.30 m (10 ft. 10 in.)


Cable Skidders 540G-III 640H Engine 96 kW (129 SAE gross hp)

John Deere 6068T, 6-cylinder diesel

128 kW (172 SAE gross hp) PowerTech™ Plus 6068H, Tier 3

Power with lockup torque-converter option

N/A 138 kW (185 SAE gross hp)




Winch Series 4000 bare-drum line pull up to 155.81 kN (35,027 lb.)

Series 4000 bare-drum line pull up to 227 kN (51,173 lb.)

Weight 10 333 kg (22,780 lb.) 13 745 kg (30,303 lb.) Lockup torque converter: 13 904 kg (30,653 lb.)

Shipping dimensions

With 23.1 L x 26 tires, narrow: (W) 2.64 m (8 ft. 6 in.) (L) 6.33 m (20 ft. 9 in.)(H) 3.03 m (9 ft. 11 in.)

With 23.1 x 26 tires direct drive: (W) 3.0 m (9 ft. 10 in.) (L) 7.23 m (23 ft. 9 in.) (H) with water-tank package: 3.2 m (10 ft. 5 in.)

Lockup torque converter: (W) 3.0 m (9 ft. 10 in.) (L) 7.28 m (23 ft. 11 in.) (H) with water-tank package: 3.2 m (10 ft. 5 in.)



34

35

Cut to the bottom line.Our signature attachments are just what you ordered. Whether you need drive-to-tree applications on wheeled carriers or swing-to-tree applications on tracked carriers, these versatile heads can take on many jobs. Harvesting large trees, selec-tive cutting of valuable species, salvaging storm-damaged timber, or right-of-way clearing. We’re right there with you.

John Deere Attachments



752 HD H480C H270 H290Cutting capacity 57 cm (22.4 in.) 71 cm (28 in.) 65 cm (25.6 in.) 75 cm (29.5 in.)

Maximum delimbing 40 cm (15.7 in.) 48 cm (18.9 in.) 46 cm (18.1 in.) 51 cm (20.1 in.)

Weight 950 kg (2,095 lb.)

1170 kg (2,580 lb.)

1350 kg (2,980 lb.)

1870 kg (4,123 lb.)

H745 H412 H754 H414Cutting capacity 55–62 cm

(21.6–24.4 in.)47 cm (18.5 in.) 55–62 cm

(21.6–24.4 in.)62 cm (24.4 in.)


Weight 780–920 kg (1,719–2,028 lb.)

695 kg (1,523 lb.) 830–950 kg(1,830–2,094 lb.)

1000 kg (2,205 lb.)

Harvesting and Processing Heads

36


www.JohnDeere.com/Forestry


Felling HeadsDrive-to-Tree

Swing-to-Tree

FD22B FD45Cutting capacity 56 cm (22 in.) 51 cm (20 in.)

Weight 3012 kg (6,640 lb.) 2200 kg (4,800 lb.)

Accumulating capacity

0.48 m2 (5.17 sq. ft.) 0.64 m2 (6.9 sq. ft.)

FS20 FS22B FR22B FR24BCutting capacity 45.7 cm (18 in.) 56 cm (22 in.) 56 cm (22 in.) 62 cm (24.5 in.)

Weight 2631 kg (5,800 lb.) 3493 kg (7,700 lb.) 3774 kg (8,320 lb.) 3948 kg (8,704 lb.)

Accumulating capacity

0.43 m2 (4.63 sq. ft.) 0.48 m2 (5.17 sq. ft.) 0.48 m2 (5.17 sq. ft.) 0.59 m2 (6.4 sq. ft.)

38

39

The multi-tool of the woods.Waratah has earned its right as “logger’s choice.” As we’ve proven over the years, these heads can do just about anything. From processing decked wood to tree-length felling to cut-to-length applications, with a Waratah every job gets done. Their superior grab-arm strength, outstanding power-to-weight ratios, and solid traction-synchronized drives see to that.

Waratah Attachments



HTH250-HD H270 H290Cutting capacity 57 cm (22.4 in.) 65 cm (25.6 in.) 75 cm (29.5 in.)

Maximum delimbing 40 cm (15.7 in.) 46 cm (18.1 in.) 51 cm (20.1 in.)

Weight 950 kg (2,095 lb.) 1350 kg (2,980 lb.) 1870 kg (4,123 lb.)


H412 H414 HTH460 H480CCutting capacity 47 cm (18.5 in.) 62 cm (24.4 in.) 62 cm (24.4 in.) 71 cm (28 in.)


Weight 695 kg (1,523 lb.) 1000 kg (2,205 lb.) 820 kg (1,808 lb.) 1170 kg (2,580 lb.)

Harvesting and Processing Heads

200 Series 400 Series

40

41

HTH616C HTH618C HTH622B HTH623CCutting capacity 51 cm (20 in.) 51 cm (20 in.) 75 cm (30 in.) 75 cm (29.5 in.)

Hydraulic requirements

35 MPa (5,075 psi)

35 MPa (5,075 psi)

35 MPa (5,075 psi)

35 MPa (5,075 psi)

Maximum delimbing 70 cm (28 in.) 70 cm (28 in.) 64 cm (25 in.) 70 cm (28 in.)

Weight 1680 kg (3,696 lb.)

1940 kg (4,268 lb.)

2120 kg (4,664 lb.)

2800 kg (6,160 lb.)

HTH624C HTH62675 cm (29.5 in.) 86 cm (34 in.)

35 MPa (5,075 psi)

35 MPa (5,075 psi)

76 cm (30 in.) 88 cm (35 in.)

3386 kg (7,510 lb.)

4720 kg (10,384 lb.)

FL85Cutting capacity 85 cm (33.5 in.)

Hydraulic requirements

25 MPa (3,600 psi)

Weight 1550 kg (3,410 lb.)

Felling HeadsHarvesting and Processing Heads

600 Series

42

43


Engine 33.5 kW (45 net hp) to 66.7 kW (89 net hp)

Tipping load 2003 kg (4,412 lb.) to 4279 kg (9,425 lb.)

Rated operating capacity

681 kg (1,500 lb.) to 1498 kg (3,300 lb.) @ 35 percent of tipping load / 1002 kg (2,206 lb.) to 2145 kg (4,725 lb.) @ 50 percent of tipping load

Bucket breakout force

989 kg (2,178 lb.) to 6299 kg (13,875 lb.)

Tractive effort 3629 kgf (8,000 lbf.) to 5227 kgf (11,500 lbf.)

Ground pressure 33 kPa (4.8 psi) to 34.7 kPa (5.0 psi)

Operating weight 3087 kg (6,800 lb.) to 5039 kg (11,100 lb.)

Ground speed 9.7 km/h (6.0 mph) to 12.6 km/h (7.8 mph) with 2-speed option

Track stars.They might share several of the same best-in-class features with their 300-Series siblings, but our compact track loaders are far more than just skid steers on tracks. Heavy-duty booms and coolers give them the muscle to deliver impressive breakout and tractive effort. Plus, their rubber-track undercarriage provides a smooth ride — with unmatched durability, stability, and ground clearance. That’s breakaway performance.

Compact Track Loaders

44



Go beyond the limits of other dozers.Other dozers can’t measure up to the flexibility and operating ease of ours. Dual-path hydrostatic drivetrains provide productivity-boosting full-power turns, counterrotation, and infinitely variable track speeds. Total Machine Control lets an operator customize machine operating characteristics and response. If you want an EPA Interim Tier 4/EU Stage IIIB dozer, check out the new 850K. Like all of our dozers, it’s available with numerous blade and undercarriage configurations.

Crawler Dozers

Engine 57 kW (77 net hp) to 250 kW (335 net hp)

Operating weight 7386 kg (16,283 lb.) to 35 309 kg (77,843 lb.)

Track on ground 2184 mm (86 in.) to 3175 mm (125 in.)

Blade width range 2464 mm (97 in.) to 4.3 m (170 in.)

Undercarriage configurations

LT, LGP, and standard


46

47


Big performance in every size.With a full line of models, plus numerous options and attachments, we’ve got excavators for all of your tasks. These highly versatile machines bring maximum productivity to the jobsite with cool-running efficiency. Spacious cabs provide unsurpassed visibility, and low-effort joystick controls, unmatched metering, and smooth multifunction operation provide the precision you need. If you want an EPA Interim Tier 4/EU Stage IIIB excavator, check out our new G-Series.

ExcavatorsEngine 11.0 kW (14.8 net hp) to 40.5 kW (54 net hp)


Digging depth / Digging reach

2.17 m (7 ft. 1 in.)/3.90 m (12 ft. 10 in.) to3.77 m (12 ft. 4 in.)/6.23 m (20 ft. 5 in.)


16.0 kN (3,597 lb.) to 41.0 kN (9,217 lb.)

Swing speed 0–8.9 to 0–9.5 rpm

Arm lengths 0.93 m (3 ft. 1 in.) standard/1.13 m (3 ft. 8 in.) long to 1.5 m (4 ft. 11 in.) standard/1.85 m (6 ft. 1 in.) long

Engine 119 kW (159 net hp)

Operating weight 19 600 kg (43,211 lb.) to 23 588 kg (52,003 lb.)

Digging depth / Maximum reach


Bucket digging force 101.9 kN (22,916 lb.) to 128.6 kN (28,904 lb.)

Arm lengths 2.71 m (8 ft. 11 in.) to 2.91 m (9 ft. 7 in.)

Arm force 82.1 kN (18,465 lb.) to 101.7 kN (22,873 lb.)

Optional 2-piece boom

Engine 40.5 kW (54 net hp) to 397 kW (532 net hp)

Operating weight 8048 kg (17,743 lb.) to 87 659 kg (193,255 lb.)

Digging depth / Maximum reach


Bucket digging force 55.0 kN (12,368 lb.) to 399.0 kN (89,699 lb.)

Arm lengths 1.62 m (5 ft. 4 in.)/2.12 m (6 ft. 11 in.) to 2.95 m (9 ft. 8 in.)/3.7 m (12 ft. 2 in.)/4.4 m (14 ft. 5 in.)/5.4 m (17 ft. 9 in.)

Arm force 38.1 kN (8,554 lb.) to 323.0 kN (72,613 lb.)

Drawbar pull 6650 kg (14,661 lb.) to 57 240 kg (126,193 lb.)

Compact Excavators

Wheeled Excavators

Construction Excavators


48

49


So many options, one obvious choice.Offering one-of-a-kind advantages and unequalled options, our grader lineup lets you decide how the work gets done. Choose from full-featured Grade Pro (GP) models with state-of-the-art fingertip armrest controls. Or opt for conven-tional lever-operated machines. In tandem- or six-wheel-drive configurations. Equipped with EPA IT4/EU Stage IIIB John Deere PowerTech™ diesels. Regardless of which you choose, these brawny blades come standard equipped with the same heavy-duty durability and uptime-boosting features, including an easy-access filter bank and simple-to-clean coolers.

Motor Graders



Maximum operating weight 21 228 kg (46,800 lb.) to 22 054 kg (48,620 lb.)

Blade pull 12 800 (28,220 lb.) to 19 849 kg (43,760 lb.)

GP models for cross slope and integrated grade control

50

51

Engine 33.5 kW (45 net hp) to 66.7 kW (89 net hp)


Bucket breakout force 989 kg (2,178 lb.) to 6299 kg (13,875 lb.)

Tipping load 1146 kg (2,525 lb.) to 2906 kg (6,400 lb.)

Tires 10 x 16.5 8 PR Extra Wall to 14 x 17.5 14 PR Hauler

Small wonders.Loaded with customer-inspired enhancements, our D-Series Skid Steers provide roomy operator stations, quiet pressurized cabs, unsurpassed visibility, and curved-glass swing-out doors. You have a choice of numerous productivity-boosting options including selectable control pattern and variable boom and limits. Need something smaller? Opt for a 313 or 315. Agile, they’re perfect for tight-quarters’ work.

Skid Steers



52

53


52

53


Operating weight 11 055 kg (24,372 lb.) to 32 538 kg (71,734 lb.)

Bucket capacity range

1.5 m3 (2.0 cu. yd.) to 6.2 m3 (8.1 cu. yd.)


6056 kg (13,352 lb.) to 21 709 kg (47,860 lb.)

Full-turn tipping load

6105 kg (13,459 lb.) to 20 282 kg (45,160 lb.)

Take productivity to a higher level.Unmatched stability, the smoothest ride on the jobsite, and impressive loading performance — K-Series Loaders deliver everything you need. Each is loaded with productivity- and uptime-boosting advantages including smooth-as-silk PowerShift™ transmissions, high-torque PowerTech™ diesels, Quad-Cool™ systems, and state-of-the-art multifunction monitors. The 644K, 724K, and 744K Loaders are available with EPA Interim Tier 4/EU Stage IIIB diesels.

Wheel Loaders

54


Length/ width/ height

millimeter mmcentimeter cmmeter mmillimeter mmcentimeter cmmeter m

inch in.inch in.inch in.feet ft.feet ft.feet ft.

0.039370.393739.37010.003280.03283.28084

0.039370.393739.37010.003280.03283.28084

Weight kilogram kgtonne tkilogram kgtonne t

pound lb.pound lb.tons (short) tonstons (short) tons

2.204622024.620.0011021.1023

2.204622024.620.0011021.1023

Distance meter mkilometer kmkilometer kmmeter mkilometer km

yard yd.yard yd.feet ft.mile milemile mile

1.09361093.613280.840.000621370.62137

1.09361093.613280.840.000621370.62137

Power kilowatt kWkilowatt kW

horsepower SAE hphorsepower ISO hp

1.3411.3596

1.3411.3596

Force kilonewton kNNewton N

pound-force lbf.pound-force lbf.

224.80890.2248089

224.80890.2248089

Torque/lift torque

kilonewton-meter kNmNewton-meter Nm

foot pound-force lb.-ft.foot pound-force lb.-ft.

737.560.73756

737.560.73756

Volume liter lliter l

U.S. gallon gal. U.S.gallon gal.

0.264170.21997

0.264170.21997

Speed kilometers per hour km/hmeters per second m/s

miles per hour mphfeet per second fps

0.621373.28

0.621373.28

Flow liters per minute l/min U.S. gallons per minute gpm U.S. 0.26417 0.26417

Pressure Pascal Pakilopascal kPabar bar

pound-force per square inch psipound-force per square inch psipound-force per square inch psi

0.000145040.145037714.5038

0.000145040.145037714.5038

Metric Description (Abbreviation) Imperial Description (Abbreviation) To convert to Metric, divide by: To convert to Imperial, multiply by:

Unit conversions from metric to imperial


56

57


www.JohnDeere.com/Forestry

At John Deere, We’re For Loggers.In many ways, we are defined by you, our customers. You’re the ones putting our equipment through its paces day after day. You know what works and what needs improvement. With your input, we have developed Customer Personal Service (CPS) — an evolving lineup of programs that can be adapted to your specific needs, covering the life cycle of your equipment, and helping you manage your operating costs. CPS applications can even be used on non- John Deere equipment. It’s all about you, not us.

Customer Personal Service WorkSight SolutionsFor every worksite problem, there’s a WorkSight Solution. We listen to our customers and respond with solutions that increase productivity and uptime while lowering daily operat-ing costs.

JDLink™, Fleet Care, and Service ADVISOR™ Remote are three separate tools that make your work easier in different ways. But the ultimate power comes from all three working together, turning machine data into time-boosting solutions — WorkSight Solutions.

Control your fleet from your seat with JDLink We cannot overemphasize the importance of JDLink as the gateway application for all CPS products. These John Deere-exclusive telematic systems allow you to instantly access fuel information, utilization, location, maintenance planning, machine alerts — and more — anywhere you log onto the Internet.

Although there are JDLink systems that can be used with non-Deere equipment, these systems are the only telematics designed by an equipment manufacturer. JDLink is standard equipment on many current and late-model John Deere machines, so you may already have access to this valuable data.

It thinks, therefore it’s Fleet CareThis revolution in proactive machine maintenance actually thinks through potential downtime symptoms before prescribing cures to keep your bottom line fit. It even delivers adviso-ries directly to your email inbox.

This exclusive machine health solution analyzes JDLink, inspection, and fluid data, and tells you what to do to make your equipment run better. Longer. And at lower cost. Fleet Care is like an apple a day for the health of every machine in your fleet.

Service ADVISOR Remote delivers big-time uptime Contractors are familiar with the decade-old Service ADVISOR™. It’s the original John Deere diagnostic tool for technicians to plug directly into equipment to pull trouble codes. Now, with Service ADVISOR Remote, your tech can request and read codes from anyplace he or she logs onto the Internet.

With an active JDLink subscription, your John Deere dealer can perform remote repairs and diagnostics while the machine is working. Dealer technicians will know what action needs to be taken before they leave the shop, so they can arrive at your site with a replacement part in hand.

JDLink wireless communication system available in specific countries; see your dealer for details.



58

59


60

61


Forestry Wear PartsSaw teeth, blades, delimbing knives, and chains are key to maximizing performance and fuel efficency in the woods. John Deere has a full line of quality saw products you can count on to cut faster and last longer. For high-impact jobs, choose tools made from heat-treated steel. For jobs with abrasive conditions, we offer carbide-tipped tools. And, for wheeled and tracked feller bunchers, Extended Life Saw Teeth — longer-lasting teeth that deliver cleaner and higher-quality cut wood — are now available.

Parts AvailabilityWhen a piece of equipment goes down, losses go up. That’s why we’ve dramatically boosted our parts availability. And increased our parts locations and moved them closer to where you’re working. Now you can rely on service and maintenance parts when you need them. Overnight. For faster and more timely parts delivery, call on John Deere. And get back to work.

Certified Customer SupportCustomer Support Advisors, Parts Advisors, and Service Technicians are certified to have the knowledge and skills to help make important decisions on machine maintenance and repair. They understand your business and will help you customize a plan that meets your specific needs.

Web BookstoreThe John Deere online bookstore, www.jdtechinfo.com, is the central location for John Deere Construction, Forestry, and Hitachi technical information. Information is available in print, on CD/DVD, or as a downloaded PDF. There is also a technical support call center that provides product guidance and order assistance.

Maximum Life UndercarriageJohn Deere Maximum Life Undercarriage with SC-2™-coated bushings, larger components, and improved seals provide 57-percent per-hour cost savings over standard sealed and lubed track.

Ask your dealer about our wear-assurance programs that offer up to 6,000 hours of cover-age on any 450-, 550-, 650-, or 700-sized dozer with SC-2-coated bushings or a Maximum Life Undercarriage.

Customer Personal Service OnlineCPS Online is a pathway to the most precious commodity of all — information. It’s a secured Web site that links you to your machine specs and owning and operating costs.

Self-register on CPS Online and you can order technical manual CD-ROMs, email your dealer, and research part specifications for non-John Deere equipment. You can access through the contractor’s or logger’s pages on JohnDeere.com.

Finance ProgramsJohn Deere Financial has a full menu of customized business solutions to meet all your cash flow needs, including PowerPlan™, the revolving charge account that’s ideal for handling your monthly expenses. Contact your John Deere dealer or call 1-800-468-8518, ext. 100 today.

Certified UsedSpotting a wide gap in the equipment marketplace, John Deere started working on the Certified Used program a few years back by setting equipment standards for the program. For a skidder or forwarder to be considered for certification, the machine must have low hours on the meter and be in exceptional condition. Before John Deere will stand behind the machine with a 90-day warranty (with additional coverage available), it must first ace a 100-plus-point inspection conducted by a certified factory technician. In today’s economy, John Deere Certified Used is among our industry’s best values.

Extended CoverageFlexibility is the key to CPS. Extended Coverage warranty lets you custom-fit coverage to your needs, giving you a fixed cost for machine repairs over a given period of time. Whether you work in a severe-service operation or just want to spread the risk of doing business, Extended Coverage warranty is a great way to protect your cash flow. An Extended Coverage warranty also travels well because it’s backed by the John Deere Construction & Forestry Company and honored by all John Deere Construction & Forestry dealers.

Component Life CycleCPS is dedicated to extending the life of your equipment. Through vital information on the projected life spans of machine components, you can make informed decisions on machine maintenance. Depending on sample data, fluid life may be extended with Super Caddy™ — a sophisticated filtering tool. CPS shares information with you to extend performance and longevity of machine components while keeping daily operating costs low.

62

63


Planned Maintenance (PM) AgreementsKeeping you up and running is the ultimate goal of CPS, and ensuring timely maintenance work through our PM Agreements is the key to this mission. PM Agreements rely on advanced maintenance programs like Fleet Care — a revolutionary service that thinks through JDLink machine data, fluid samples, and machine inspection data to recommend — in simple terms — the best methods to proactively control machine health, uptime, and longevity.

Fluid AnalysisFluid Analysis aims to drastically reduce catastrophic downtime, extend drain intervals, and save you money. It’s an important part of Customer Personal Service when packaged with an Extended Coverage warranty and a Planned Maintenance Agreement. Fluid Analysis is a proactive approach to machine maintenance that gives you data on all your machine’s major components in time to take action.

Remanufactured ComponentsGet like-new performance for a fraction of the price. Each transmission, axle, engine, hydraulic pump, motor, cylinder, control valve, rotary manifold, fuel-injector nozzle, or directional control valve helps avoid downtime if it’s installed before the old component fails. Each unit is remanufactured to the OEM’s specs with certified parts, tested for leaks and performance, and backed by a one-year/1,500-hour warranty for parts and labor when dealer installed.

Notes


64

65


NotesNotes



BECAUSE WHEN YOU SAY YOU HAVE TONS OF WORK TO DO, YOU MEAN IT LITERALLY.That’s why at John Deere, We’re For Loggers.

66

67

Documents

2011 forestry full line-up