12
All AMI armor products are 100% made in the USA. PRODUCT CATALOG

2010 AMI Catalog

Embed Size (px)

DESCRIPTION

2010 AMI Catalog

Citation preview

Page 1: 2010 AMI Catalog

All AMI armor products are 100% made in the USA.

P R O D U C T C ATA L O G

Page 2: 2010 AMI Catalog

Armored Mobility Inc. a California Corporation was founded in January 2006 to provide b a l l i s t i c t h r e a t m a n a g e m e n t t o l a w enforcement, the military and Special Forces through the design and production of functional armor used in the line of duty.

Development begins with collaborative feed back from field personnel and tactical experts who understand the need for armor protection.

The AMI mantra is to design armor products to support the important critical requirements of threat protection, weight, adaptability and cost.

Our key engineer ing , market ing and production personnel have current and prior military, Special Forces combat and law enforcement experience.

Our advisory team is involved in training and ballistic analysis, serving law enforcement and military at all department levels.

Each AMI product offering is the result of focused research and development to solve specific needs not offered in the marketplace today. All AMI products are tested at the company R&D test range, plus various law enforcement and military test ranges used for customer demonstration purposes. Certain products are NIJ certified to meet the utmost standards in keeping with a rigid profile of “zero defects.”

Page 3: 2010 AMI Catalog

MAS SHIELD• Meets NIJ Standard 0108 Level III ballistic resistance standards• Lightweight for Tactical Mobility • Lightweight feature reduces muscle fatigue thus, making the shield easier to

control and enables the user to remain protected and agile over longer periods of time

• (MAS 3815 weighs appx.16 lbs.) (MAS 3818 weighs appx. 22 lbs.)• Instant attachments to vehicles, HMMWV, boats and aircraft• Vehicle Attachment System to withstand very high speeds and harsh driving

conditions• Integrated Strap System for use as a stretcher• Multiple Molded Rubber Handholds• Sling Strap that distributes the weight equally between the shoulder and arm• Lightweight Shield Connection System for Expanded Threat Protection• Patented design military ballistic grade material creating an outer jacket to

encompass the shield Front

Back

MAS Shield is rated to stop the following threats

• 7.62mm M80 NATO FMJ - 2780 fps• 5.56mm LeMas Urban Warfare - 3718 fps• 5.56mm M193 FMJ - 3200 fps• 6.8mm GR OTM -2625 fps• 30-06 M2 FMJ - 2736 fps• 7.62 x 39mm M43 Steel Core FMJ - 2307 fps• 300 Winchester Magnum• 12 Gage High Velocity Slug• MAS will not stop 5.56mm M855 Green Tip FMJ

Page 4: 2010 AMI Catalog

TAC 3S• NIJ Certified Level III - Stand Alone Multi-Strike Plate• Resilient, patented weather resistant polyurethane coating• 3mm AR500 Ballistic Steel Plate Strike Face attached to Dyneema plate• Dimensions: 10” x 12”• Weight: Approximately 7.5 lbs

TAC 3S Plate is rated to stop the following threats

• 7.62mm M80 NATO FMJ - 2780 fps• 5.56mm M855 Green Tip FMJ - 3054 fps• 5.56mm LeMas Urban Warfare - 3718 fps• 5.56mm M193 FMJ - 3200 fps• 6.8mm GR OTM - 2625 fps• 30-06 M2 FMJ - 2736 fps• 7.62 x 39mm M43 Steel Core FMJ - 2307 fps• 300 Winchester Magnum• 12 Gage High Velocity Slug

Level III Stand Alone, Multi-Strike Plate

Single Curve Plate

SAPI-3

Triple Curve for Comfort

• Designed to provide Level III Protection• Recommended to be worn in conjunction with Level IIIa

Soft Body Armor• SAPI configuration - Triple curve for comfort• Resilient, patented weather resistant polyurethane coating• Dimensions: 10” x 12”• Weight: Approximately 3 lbs

SAPI-3 Plate is rated to stop the following threats

• 7.62mm M80 NATO FMJ - 2780 fps• 5.56mm LeMas Urban Warfare - 3718 fps• 5.56mm M193 FMJ - 3200 fps• 6.8mm GR OTM -2625 fps• 30-06 M2 FMJ - 2736 fps• 7.62 x 39mm M43 Steel Core FMJ - 2307 fps• 300 Winchester Magnum• 12 Gage High Velocity Slug• SAPI-3 Plate will not stop 5.56mm M855 Green Tip FMJ

3mm AR500 Ballistic Steel Plate

Page 5: 2010 AMI Catalog

SAPI-3 SWIMMERS CUT

• Designed to provide Level III Protection• Recommended to be worn in conjunction with Level IIIa

Soft Body Armor• SAPI configuration - Triple curve for comfort• Swimmers Cut for enhanced mobility• Resilient, patented weather resistant polyurethane coating• Dimensions: 10” x 12”• Weight: Approximately 3 lbs

SAPI-3 Swimmers Cut is rated to stop the following threats

• 7.62mm M80 NATO FMJ - 2780 fps• 5.56mm LeMas Urban Warfare - 3718 fps• 5.56mm M193 FMJ - 3200 fps• 6.8mm GR OTM -2625 fps• 30-06 M2 FMJ - 2736 fps• 7.62 x 39mm M43 Steel Core FMJ - 2307 fps• 300 Winchester Magnum• 12 Gage High Velocity Slug• SAPI-3 Swimmers Cut will not stop 5.56mm M855 Green Tip FMJ

Swimmers Cut for Enhanced Mobility

Triple Curve for Comfort

TAC-ST• Designed to provide Level III protection• Recommended to be worn in conjunction with Level IIIa Soft Body Armor• Ergonomically, Single Curve 6.5mm AR500 Steel Plate• Resilient, weather resistant patented polyurethane coating• Dimensions: 10” x 12”• Weight: Approximately 8 lbs.• Can be cut or shaped to almost any specification requested

6.5mm AR500 Steel Plate

TAC-ST Plate is rated to stop the following threats

• 7.62mm M80 NATO FMJ - 2780 fps• 5.56mm M855 Green Tip FMJ - 3054 fps• 6.8mm GR OTM -2625 fps• 30-06 M2 FMJ - 2736 fps• 7.62 x 39mm M43 Steel Core FMJ - 2307 fps• 300 Winchester Magnum• 12 Gage High Velocity Slug• TAC-ST will not stop 5.56mm LeMas Urban Warfare - 3718 fps• 5.56mm M193 FMJ - 3200 fps

Page 6: 2010 AMI Catalog

SIDE ARMOR PLATES

• Side Armor Plates are available in TAC-3S, SAPI-3 or TAC-ST ballistic threat ratings• Dimensions are available in 6” x 8” or 6” x 6”

SIDE ARMOR PLATE CARRIERSAMI Side Armor Plate Carriers are made from 1680 Denier Ballistic Nylon and will hold both 6” x 8” or 6” x 6” dimensions.

Available in the following colors:• Black• Coyote Tan• Ranger Green• Multi-Cam

TRAUMA PLATES

• AMI Trauma Plates are available in TAC-3S, SAPI-3 or TAC-ST Ballistic Threat Ratings.

• Available in 6”x 8” or 6” x 6” Dimensions.• Ergonomic single curve for comfort.• Insert the AMI Trauma Plate into your Soft

Body Armor carrier and instantly turn your Level IIIa armor into a Level III.

6” x 8” Dimension 6” x 6” Dimension

Page 7: 2010 AMI Catalog

ARMORED BAG• Black Ballistic Nylon 1680 Denier• Heavy Duty YKK Zippers• Padded protective computer sleeve with

“Stealth” side release buckle for up to 17” laptop computer

• Removable SAPI-3 Armor Plate• Padded handle wrap• Adjustable 1 1/2” shoulder strap• Strap/Handle system for use as a shield• External zipper pocket• External velcro pouch• 4” velcro loop band across bag for

attaching identification• Internal wire mesh zippered slip pocket• Concealed universal pistol compartment

with spare magazine holder• Full MOLLE system interior panel• Ideal companion for the discrete armed

professional• Laptop Bag and Level III SAPI-3 Ballistic

Panel Shield can be sold separately

Page 8: 2010 AMI Catalog

RAPID RESPONSECARRIER

Front

Side

Back

• 1680 Denier Ballistic Nylon• Full front and back MOLLE System• Universal adjustment• Durable. Can be safely stowed for field use• Can safely house all AMI ballistic plates• Top loading for secure storage of ballistic plates• Custom Rubber Grip Drag handle• 4” Velcro ID on front and back• Berry Amendment Compliant

Attachments Not IncludedFor photo purpose only

Page 9: 2010 AMI Catalog

LOW PROFILECARRIER

• 1000 Denier Nylon• Dual 6” Elastic 2-Ply Bands with 6” Velcro• Modular side armor pouches can be attached• 1.5” webbing guides for elastic on front, back and

shoulder straps• Can safely house all AMI plates• Top loading hard plate outer pouches• Internal soft armor pouches• Padded shoulder straps• 4” Velcro ID on front and back• Comes with two extra elastic cummerbunds• Berry Amendment Compliant• Currently in use by US Security Contractors

in Afghanistan

Front

Back Side

Black Ranger Green

Tan

Page 10: 2010 AMI Catalog

ARMOR CITATION HOLDER

One of the most dangerous situations a law enforcement officer faces is conducting a traffic enforcement stop. The Armor Citation Holder is designed to provide officers additional protection against Level III ballistic threats.

The Armor Citation Holder has a handle on the back for the user to grab with one hand and present it towards the threat.

Carry this Armor Citation Holder and feel an added sense of security during your traffic enforcement stops.

Specifications:• Designed to provide Level III Protection.• 6.5mm of AR500 Ballistic Armor Plate.• Coated with a Patented Polyurethane to prevent

spalling.• Standard size comes in 4 1/2 x 12 1/4 that fits most all

police issued aluminum citation holders.

• 7.62mm M80 NATO FMJ - 2780 FPS• 5.56mm M855 Green Tip FMJ - 3054 FPS• 6.8mm GR OTM - 2625 FPS• 30-06 M2 FMJ - 2736 FPS• 7.62x39mm M43 Steel Core FMJ - 2307 FPS• 300 Winchester Magnum• 12 Gage High Velocity Slug• AR500 Plate will not stop the following threats• 5.56 LeMas Urban Warfare - 3718 FPS• 5.56mm M193 FMJ - 3200 FPS

AR500 Plate is rated to stop the following threats

Page 11: 2010 AMI Catalog

Training:

Armored Mobility Incorporated has partnered with Strategic Training Systems International to offer professional tactical training. STS International possesses the ability to offer specialized, realistic, proven training to Law Enforcement and Military organizations. STS strives to “Set the Standard for Excellence in Training” and is committed to offering cutting-edge, principally based training for todayʼs warrior that will enable you and your teammates to achieve higher levels of performance and safety.

Visit their website at: WWW.STSINTL.NET

Restriction on Possession or Purchase of Body Armor.

It is against Federal Law for a person convicted of a violent felony to purchase or possess body armor. In addition, various States also have laws restricting the purchase or possession of body armor by persons convicted of drug crimes, certain felonies, or other crimes of violence. By purchasing body armor from AMI you acknowledge and certify that: (1) you have no felony convictions, (2) you have not been convicted of any other crime that would restrict your ability to purchase or possess body armor under any State or Federal law, (3) you do not intend to use the body armor for any criminal purpose and (4) you are over 18 years old. AMI reserves the right, in its sole discretion, to refuse to sell body armor to any person. Additionally, the sale of body armor to residents of Connecticut is restricted to in-person sales, unless the sale is made to certain law enforcement or military personnel.AMI will not sell to anyone except law enforcement, military or US Federal Government. NO PRIVATE SALES.

For sales, please contact an AMI representative.

Page 12: 2010 AMI Catalog

ARMORED MOBILITY, INC.

5610 SCOTTS VALLEY DRIVE, SUITE B332

SCOTTS VALLEY, CALIFORNIA 96066WWW.ARMOREDMOBILITY.COM