Upload
biniyam12
View
215
Download
0
Embed Size (px)
Citation preview
7/27/2019 2007-009 Travel Motor RH200 RH340
1/2
HEX
Bucyrus HEX GmbHKarl-Funke-Str. 3644149 DortmundGermanyPhone: +49 (0) 231 / 922 -3
Terex|O&K Campaign Bulletin 2007-009 1/2
Cam paign Bu l let in No . 2007-009 SUBJECT: Travel Motor mounting bolts
AFFECTED MACHINE(S): RH 200 Serial-No. 200 088 to 200 116RH 340 Serial-No. 340 001 to 340 041
DATE: June 18 th. 2007GB
ISSUE
On some machines travel motors were installed with hexagonal or allen bolts.Due to insufficient space between bolt head and motor housing, tightening withsocket / torque wrench is not possible sufficiently.Please note, bolt-failure can lead to total loss of transmission.
ACTION
Machines need to be checked, if either hexagonal or allen bolts got used for travelmotors. If this is the case, they must be exchanged against double hexagonal bolts.
Requested parts per machine:
tightening torque = 350 Nm (bolts clean, slightly oiled)
WARRANTY CLAIM ALLOWANCE
Parts parts to be ordered from parts divisionLabour max. 2 hoursTravel Cost noneThird Party Cost none
Removed Parts scrap
TERMINATION DATE
Action to be performed as soon as possible but no later than 30 th Aug. 2007.
REPORTING
- modification with Warranty Claim- if no modification necessary with P roduct Issue Report
Use the Campaign Bulletin No. 2007 -009 as description 06140 as part groupnumber.
16 double hexagonal bolts PN 2 418 13116 washers PN 2 416 846
7/27/2019 2007-009 Travel Motor RH200 RH340
2/2
HEX Campaign Bulletin 2007-009
travel-motors assembled with double hex bolts