2006 Chevrolet Cobalt Owner Manual M · 2005-08-22 · Front Seats Manual Seats {CAUTION:You can lose control of the vehicle if you try to adjust a manual driver’s seat while the

Seats and Restraint Systems ........................... 1-1Front Seats ............................................... 1-2Rear Seats ............................................... 1-8Safety Belts .............................................. 1-9Child Restraints ....................................... 1-29Airbag System ......................................... 1-51Restraint System Check ............................ 1-66

Features and Controls ..................................... 2-1Keys ........................................................ 2-2Doors and Locks ....................................... 2-7Windows ................................................. 2-12Theft-Deterrent Systems ............................ 2-14Starting and Operating Your Vehicle ........... 2-17Mirrors .................................................... 2-33OnStar® System ...................................... 2-35Storage Areas ......................................... 2-37Sunroof .................................................. 2-38

Instrument Panel ............................................. 3-1Instrument Panel Overview .......................... 3-4Climate Controls ...................................... 3-17Warning Lights, Gages, and Indicators ........ 3-22Driver Information Center (DIC) .................. 3-38Audio System(s) ....................................... 3-48

Driving Your Vehicle ....................................... 4-1Your Driving, the Road, and Your Vehicle ..... 4-2Towing ................................................... 4-36

Service and Appearance Care .......................... 5-1Service ..................................................... 5-3Fuel ......................................................... 5-5Checking Things Under the Hood ............... 5-10Headlamp Aiming ..................................... 5-44Bulb Replacement .................................... 5-47Windshield Wiper Blade Replacement ......... 5-53Tires ...................................................... 5-54Appearance Care ..................................... 5-83Vehicle Identification ................................. 5-91Electrical System ...................................... 5-92Capacities and Specifications ................... 5-102

Maintenance Schedule ..................................... 6-1Maintenance Schedule ................................ 6-2

Customer Assistance and Information .............. 7-1Customer Assistance and Information ........... 7-2Reporting Safety Defects ........................... 7-16

Index .................................................................1

2006 Chevrolet Cobalt Owner Manual M

GENERAL MOTORS, GM, the GM Emblem,CHEVROLET, the CHEVROLET Emblem, andthe name COBALT are registered trademarks ofGeneral Motors Corporation.

This manual includes the latest information at the time itwas printed. We reserve the right to make changesafter that time without further notice. For vehicles firstsold in Canada, substitute the name “General Motors ofCanada Limited” for Chevrolet Motor Division wheneverit appears in this manual.

Keep this manual in the vehicle, so it will be there if it isneeded while you are on the road. If the vehicleis sold, leave this manual in the vehicle.

Canadian OwnersA French language copy of this manual can be obtainedfrom your dealer or from:

Helm, IncorporatedP.O. Box 07130Detroit, MI 48207

How to Use This ManualMany people read the owner manual from beginning toend when they first receive their new vehicle. If thisis done, it can help you learn about the features andcontrols for the vehicle. Pictures and words worktogether in the owner manual to explain things.

IndexA good place to quickly locate information about thevehicle is the Index in the back of the manual. It is analphabetical list of what is in the manual and thepage number where it can be found.

Litho in U.S.A.Part No. 06COBALT A First Printing ©2005 General Motors Corporation. All Rights Reserved.

ii

Safety Warnings and SymbolsThere are a number of safety cautions in this book. Weuse a box and the word CAUTION to tell about thingsthat could hurt you if you were to ignore the warning.

{CAUTION:

These mean there is something that could hurtyou or other people.

In the caution area, we tell you what the hazard is.Then we tell you what to do to help avoid or reducethe hazard. Please read these cautions. If you do not,you or others could be hurt.

You will also find a circlewith a slash through it inthis book. This safetysymbol means “Do Not,”“Do Not do this” or “Do Notlet this happen.”

iii

Vehicle Damage WarningsAlso, in this manual you will find these notices:

Notice: These mean there is something that coulddamage your vehicle.

A notice tells about something that can damage thevehicle. Many times, this damage would not be coveredby your vehicle’s warranty, and it could be costly. Butthe notice will tell what to do to help avoid the damage.

When you read other manuals, you might seeCAUTION and NOTICE warnings in different colors or indifferent words.

There are also warning labels on the vehicle. They usethe same words, CAUTION or NOTICE.

Vehicle SymbolsThe vehicle has components and labels that usesymbols instead of text. Symbols are shown along withthe text describing the operation or informationrelating to a specific component, control, message,gage, or indicator.

If you need help figuring out a specific name of acomponent, gage, or indicator, reference the followingtopics:

• Seats and Restraint Systems in Section 1

• Features and Controls in Section 2

• Instrument Panel Overview in Section 3

• Climate Controls in Section 3

• Warning Lights, Gages, and Indicators in Section 3

• Audio System(s) in Section 3

• Engine Compartment Overview in Section 5

iv

These are some examples of symbols that may be found on the vehicle:

v

✍ NOTES

vi

Front Seats ......................................................1-2Manual Seats ................................................1-2Driver Seat Height Adjuster ..............................1-3Manual Lumbar ..............................................1-3Heated Seats .................................................1-4Reclining Seatbacks ........................................1-4Head Restraints .............................................1-6Easy Entry Seat (Coupe) .................................1-7

Rear Seats .......................................................1-8Split Folding Rear Seat ...................................1-8

Safety Belts .....................................................1-9Safety Belts: They Are for Everyone .................1-9Questions and Answers About Safety Belts ......1-14How to Wear Safety Belts Properly .................1-15Driver Position ..............................................1-15Shoulder Belt Height Adjustment .....................1-21Safety Belt Use During Pregnancy ..................1-22Right Front Passenger Position .......................1-22Rear Seat Passengers ..................................1-22Rear Safety Belt Comfort Guides ....................1-25Safety Belt Pretensioners ...............................1-28Safety Belt Extender .....................................1-28

Child Restraints .............................................1-29Older Children ..............................................1-29Infants and Young Children ............................1-32Child Restraint Systems .................................1-35Where to Put the Restraint .............................1-40Lower Anchors and Tethers for

Children (LATCH) ......................................1-41Securing a Child Restraint in a Rear

Seat Position ............................................1-46Securing a Child Restraint in the Right

Front Seat Position ....................................1-48Airbag System ...............................................1-51

Where Are the Airbags? ................................1-54When Should an Airbag Inflate? .....................1-57What Makes an Airbag Inflate? .......................1-58How Does an Airbag Restrain? .......................1-58What Will You See After an

Airbag Inflates? .........................................1-59Passenger Sensing System ............................1-60Servicing Your Airbag-Equipped Vehicle ...........1-64Adding Equipment to Your Airbag-Equipped

Vehicle ....................................................1-65Restraint System Check ..................................1-66

Checking the Restraint Systems ......................1-66Replacing Restraint System Parts After a Crash ...1-66

Section 1 Seats and Restraint Systems

1-1

Front Seats

Manual Seats

{CAUTION:

You can lose control of the vehicle if you try toadjust a manual driver’s seat while the vehicleis moving. The sudden movement could startleand confuse you, or make you push a pedalwhen you do not want to. Adjust the driver’sseat only when the vehicle is not moving.

Lift the bar located under the front of the seat to unlockit. Slide the seat to where you want it and release thebar. Try to move the seat with your body to be sure theseat is locked in place.

1-2

Driver Seat Height Adjuster

The driver’s seat height adjuster is located on theoutboard side of the seat.

To raise the seat, move the lever upward repeatedlyuntil the seat is at the desired height. To lower the seat,move the lever downward repeatedly until the seat isat the desired height.

Manual Lumbar

If your vehicle has thisfeature, the knob islocated on the front of thedriver seat lower cushionon the inboard side.

Turn the knob clockwise or counterclockwise to increaseor decrease the lumbar support.

1-3

Heated SeatsYour vehicle may have heated front seats. The switchesare located on the instrument panel above the climatecontrol system.

Press the side of theswitch with the doubleindicator lights to turn onthe heated seat at thehighest setting.

Both indicator lights will be lit to indicate that the settingis on high. Press the side of the switch with the singleindicator light to go to the low setting. The indicator lightwill be lit to indicate that the setting is on low. Returnthe switch to the center to turn off the heated seat.

If your vehicle has been turned off, the last heated seatsetting will be retained when the vehicle is started again.

Reclining Seatbacks

Your vehicle has reclining seatbacks. The lever islocated on the outboard side of the seats. Lift the leverto release the seatback. Move the seatback to whereyou want it and release the lever to lock the seatback inplace. Press rearward on the seatback to be sure it islocked into place.

Driver’s Switch Shown,Passenger’s Switch

Similar

1-4

{CAUTION:

If the seatback is not locked, it could moveforward in a sudden stop or crash. That couldcause injury to the person sitting there. Alwayspush and pull on the seatback to be sure it islocked.

Do not have a seatback reclined if your vehicle is moving.

{CAUTION:

Sitting in a reclined position when your vehicleis in motion can be dangerous. Even if youbuckle up, your safety belts cannot do theirjob when you are reclined like this.

The shoulder belt cannot do its job because itwill not be against your body. Instead, it will bein front of you. In a crash, you could go into it,receiving neck or other injuries.

The lap belt cannot do its job either. In acrash, the belt could go up over yourabdomen. The belt forces would be there, notat your pelvic bones. This could cause seriousinternal injuries.

For proper protection when the vehicle is inmotion, have the seatback upright. Then sitwell back in the seat and wear your safety beltproperly.

1-5

Head Restraints

Press the button on theside of the head restraintto adjust it.

Adjust your head restraint so that the top of the restraintis closest to the top of your head. This position reducesthe chance of a neck injury in a crash.

1-6

Easy Entry Seat (Coupe)

{CAUTION:

If the easy entry right front seat is not locked,it can move. In a sudden stop or crash, theperson sitting there could be injured. After youhave used it, be sure to push rearward on aneasy entry seat to be sure it is locked.

{CAUTION:

If the seatback is not locked, it could moveforward in a sudden stop or crash. That couldcause injury to the person sitting there. Alwayspush and pull on the seatback to be sure it islocked.

The front passenger seat can be used to easily get inand out of the rear seat.

To use the easy entry seat, do the following:

1. Push down the easy entry seat handle located onthe rear of the seatback on the outboard side torelease the seatback.

2. Tilt the seatback forward completely while pushingthe seat forward.

3. Move the seatback to its original position aftersomeone gets into the rear seat area. Makesure the seatback is locked.

4. Move the seat rearward until it locks into place.

1-7

Rear Seats

Split Folding Rear SeatYou can fold either side of the rear seatback down formore cargo space.

To lower the rear seatback, follow these steps:

1. Open the trunk and pull one or both of the smallhandles located in the center of the trunk.

2. Once the handle is pulled, the seatback can bepushed open through the trunk, or pulled openfrom the inside of the vehicle.

1-8

To raise the rear seatback, lift it up and push rearwarduntil you hear a click. Push and pull on the seatbackto be sure it is locked into place.

{CAUTION:

If the seatback is not locked, it could moveforward in a sudden stop or crash. That couldcause injury to the person sitting there. Alwayspull forward on the top of the seatback at thearea of the latch to be sure it is locked.

{CAUTION:

A safety belt that is improperly routed, notproperly attached, or twisted will not providethe protection needed in a crash. The personwearing the belt could be seriously injured.After raising the rear seatback, always checkto be sure that the safety belts are properlyrouted and attached, and are not twisted.

Safety Belts

Safety Belts: They Are for EveryoneThis part of the manual tells you how to use safetybelts properly. It also tells you some things you shouldnot do with safety belts.

{CAUTION:

Do not let anyone ride where he or she cannotwear a safety belt properly. If you are in acrash and you are not wearing a safety belt,your injuries can be much worse. You can hitthings inside the vehicle or be ejected from it.You can be seriously injured or killed. In thesame crash, you might not be, if you arebuckled up. Always fasten your safety belt,and check that your passengers’ belts arefastened properly too.

1-9

{CAUTION:

It is extremely dangerous to ride in a cargoarea, inside or outside of a vehicle. In acollision, people riding in these areas are morelikely to be seriously injured or killed. Do notallow people to ride in any area of your vehiclethat is not equipped with seats and safetybelts. Be sure everyone in your vehicle is in aseat and using a safety belt properly.

Your vehicle has indicators to remind you and yourpassengers to buckle your safety belts. See Safety BeltReminder Light on page 3-24 and Passenger SafetyBelt Reminder Light on page 3-25.

In most states and in all Canadian provinces, the lawsays to wear safety belts. Here is why: They work.

You never know if you will be in a crash. If you do havea crash, you do not know if it will be a bad one.

A few crashes are mild, and some crashes can be soserious that even buckled up, a person would notsurvive. But most crashes are in between. In many ofthem, people who buckle up can survive and sometimeswalk away. Without belts they could have been badlyhurt or killed.

After more than 30 years of safety belts in vehicles,the facts are clear. In most crashes buckling updoes matter...a lot!

1-10

Why Safety Belts WorkWhen you ride in or on anything, you go as fast asit goes.

Take the simplest vehicle. Suppose it is just a seaton wheels.

Put someone on it.

1-11

Get it up to speed. Then stop the vehicle. The riderdoes not stop.

The person keeps going until stopped by something.In a real vehicle, it could be the windshield...

1-12

or the instrument panel... or the safety belts!

With safety belts, you slow down as the vehicle does.You get more time to stop. You stop over more distance,and your strongest bones take the forces. That is whysafety belts make such good sense.

1-13

Questions and Answers AboutSafety Belts

Q: Will I be trapped in the vehicle after an accidentif I am wearing a safety belt?

A: You could be — whether you are wearing a safetybelt or not. But you can unbuckle a safety belt,even if you are upside down. And your chanceof being conscious during and after an accident,so you can unbuckle and get out, is much greaterif you are belted.

Q: If my vehicle has airbags, why should I have towear safety belts?

A: Airbags are in many vehicles today and will bein most of them in the future. But they aresupplemental systems only; so they work withsafety belts — not instead of them. Every airbagsystem ever offered for sale has required the use ofsafety belts. Even if you are in a vehicle that hasairbags, you still have to buckle up to get the mostprotection. That is true not only in frontal collisions,but especially in side and other collisions.

Q: If I am a good driver, and I never drive far fromhome, why should I wear safety belts?

A: You may be an excellent driver, but if you are in anaccident — even one that is not your fault — youand your passengers can be hurt. Being a gooddriver does not protect you from things beyond yourcontrol, such as bad drivers.

Most accidents occur within 25 miles (40 km)of home. And the greatest number of seriousinjuries and deaths occur at speeds of less than40 mph (65 km/h).

Safety belts are for everyone.

1-14

How to Wear Safety Belts ProperlyThis part is only for people of adult size.

Be aware that there are special things to know aboutsafety belts and children. And there are different rulesfor smaller children and babies. If a child will be ridingin your vehicle, see Older Children on page 1-29 orInfants and Young Children on page 1-32. Follow thoserules for everyone’s protection.

First, you will want to know which restraint systems yourvehicle has.

We will start with the driver position.

Driver Position

Lap-Shoulder BeltThe driver has a lap-shoulder belt. Here is how to wearit properly.

1. Close and lock the door.

2. Adjust the seat so you can sit up straight. To seehow, see “Seats” in the Index.

3. Pick up the latch plate and pull the belt across you.Do not let it get twisted.The shoulder belt may lock if you pull the beltacross you very quickly. If this happens, let thebelt go back slightly to unlock it. Then pull the beltacross you more slowly.

1-15

4. Push the latch plate into the buckle until it clicks.Pull up on the latch plate to make sure it is secure.If the belt is not long enough, see Safety BeltExtender on page 1-28.Make sure the release button on the buckle ispositioned so you would be able to unbuckle thesafety belt quickly if you ever had to.

5. Move the shoulder belt height adjuster to the heightthat is right for you. See Shoulder Belt HeightAdjustment on page 1-21.

6. To make the lap part tight, pull up on theshoulder belt.

The lap part of the belt should be worn low and snug onthe hips, just touching the thighs. In a crash, this appliesforce to the strong pelvic bones. And you would beless likely to slide under the lap belt. If you slid under it,the belt would apply force at your abdomen. This couldcause serious or even fatal injuries. The shoulder beltshould go over the shoulder and across the chest.These parts of the body are best able to take beltrestraining forces.

The safety belt locks if there is a sudden stop or crash,or if you pull the belt very quickly out of the retractor.

1-16

Q: What is wrong with this?

A: The shoulder belt is too loose. It will not give nearlyas much protection this way.

{CAUTION:

You can be seriously hurt if your shoulder beltis too loose. In a crash, you would moveforward too much, which could increase injury.The shoulder belt should fit against your body.

1-17


A: The belt is buckled in the wrong place.

{CAUTION:

You can be seriously injured if your belt isbuckled in the wrong place like this. In a crash,the belt would go up over your abdomen.The belt forces would be there, not at thepelvic bones. This could cause serious internalinjuries. Always buckle your belt into thebuckle nearest you.

1-18


A: The shoulder belt is worn under the arm. It shouldbe worn over the shoulder at all times.

{CAUTION:

You can be seriously injured if you wear theshoulder belt under your arm. In a crash, yourbody would move too far forward, which wouldincrease the chance of head and neck injury.Also, the belt would apply too much force tothe ribs, which are not as strong as shoulderbones. You could also severely injure internalorgans like your liver or spleen.

1-19


A: The belt is twisted across the body.

{CAUTION:

You can be seriously injured by a twisted belt.In a crash, you would not have the full width ofthe belt to spread impact forces. If a belt istwisted, make it straight so it can workproperly, or ask your dealer to fix it.

1-20

To unlatch the belt, just push the button on the buckle.The belt should go back out of the way.

Before you close the door, be sure the belt is out of theway. If you slam the door on it, you can damage boththe belt and your vehicle.

Shoulder Belt Height AdjustmentBefore you begin to drive, move the shoulder belt heightadjuster to the height that is right for you.

Adjust the height so that the shoulder portion of the belt iscentered on your shoulder. The belt should be away fromyour face and neck, but not falling off your shoulder.

To move it down, pressthe release button (A) andmove the height adjusterto the desired position.You can move the heightadjuster up just bypushing up on the shoulderbelt guide.

After you move the height adjuster to where you want it,try to move it down without pressing the release buttonto make sure it has locked into position.

1-21

Safety Belt Use During PregnancySafety belts work for everyone, including pregnantwomen. Like all occupants, they are more likely to beseriously injured if they do not wear safety belts.

A pregnant woman should wear a lap-shoulder belt,and the lap portion should be worn as low as possible,below the rounding, throughout the pregnancy.

The best way to protect the fetus is to protect themother. When a safety belt is worn properly, it is morelikely that the fetus will not be hurt in a crash. Forpregnant women, as for anyone, the key to makingsafety belts effective is wearing them properly.

Right Front Passenger PositionTo learn how to wear the right front passenger’s safetybelt properly, see Driver Position on page 1-15.

The right front passenger’s safety belt works the sameway as the driver’s safety belt — except for one thing.If you ever pull the shoulder portion of the belt out all theway, you will engage the child restraint locking feature.If this happens, just let the belt go back all the wayand start again.

Rear Seat PassengersIt is very important for rear seat passengers to buckleup! Accident statistics show that unbelted people inthe rear seat are hurt more often in crashes than thosewho are wearing safety belts.

Rear passengers who are not safety belted can bethrown out of the vehicle in a crash. And they can strikeothers in the vehicle who are wearing safety belts.

1-22

Lap-Shoulder BeltAll rear seat positions have lap-shoulder belts. Here ishow to wear one properly.

1. Pick up the latch plate and pull the belt across you.Do not let it get twisted.The shoulder belt may lock if you pull the belt acrossyou very quickly. If this happens, let the belt goback slightly to unlock it. Then pull the belt acrossyou more slowly.

2. Push the latch plate into the buckle until it clicks.Pull up on the latch plate to make sure it is secure.When the shoulder belt is pulled out all the way,it will lock. If it does, let it go back all the way andstart again.If the belt is not long enough, see Safety BeltExtender on page 1-28.Make sure the release button on the buckle ispositioned so you would be able to unbuckle thesafety belt quickly if you ever had to.

3. To make the lap part tight, pull up on theshoulder part.

1-23

The lap part of the belt should be worn low and snug onthe hips, just touching the thighs. In a crash, this appliesforce to the strong pelvic bones. And you would beless likely to slide under the lap belt. If you slid under it,the belt would apply force at your abdomen. This couldcause serious or even fatal injuries. The shoulderbelt should go over the shoulder and across the chest.These parts of the body are best able to take beltrestraining forces.

The safety belt locks if there is a sudden stop or acrash, or if you pull the belt very quickly out ofthe retractor.

{CAUTION:

You can be seriously hurt if your shoulder beltis too loose. In a crash, you would moveforward too much, which could increase injury.The shoulder belt should fit against your body.

1-24

To unlatch the belt, push the button on the buckle.

Rear Safety Belt Comfort GuidesRear shoulder belt comfort guides may provide addedsafety belt comfort for older children who have outgrownbooster seats and for some adults. When installed ona shoulder belt, the comfort guide positions the beltaway from the neck and head.

There is one guide for each outboard passengerposition in the rear seat. Here is how to install a comfortguide and use the safety belt:

1. Pull the elastic cord out from between the edge ofthe seatback and the interior body to remove theguide from its storage clip.

1-25

2. Slide the guide under and past the belt. The elasticcord must be under the belt. Then, place the guideover the belt, and insert the two edges of thebelt into the slots of the guide.

3. Be sure that the belt is not twisted and it lies flat.The elastic cord must be under the belt and theguide on top.

1-26

{CAUTION:

A safety belt that is not properly worn may notprovide the protection needed in a crash. Theperson wearing the belt could be seriouslyinjured. The shoulder belt should go over theshoulder and across the chest. These parts ofthe body are best able to take belt restrainingforces.

4. Buckle, position, and release the safety belt asdescribed in Rear Seat Passengers on page 1-22.Make sure that the shoulder belt crosses theshoulder.

To remove and store the comfort guides, squeeze thebelt edges together so that you can take them out of theguides. Pull the guide upward to expose its storageclip, and then slide the guide onto the clip. Turn theguide and clip inward and slide them in between theseatback and the interior body, leaving only the loop ofthe elastic cord exposed.

1-27

Safety Belt PretensionersYour vehicle has safety belt pretensioners for the driverand right front passenger. Although you cannot seethem, they are located on the retractor part of the safetybelts. They help the safety belts reduce a person’sforward movement in a moderate to severe frontal ornear frontal crash.

Pretensioners work only once. If they activate in acrash, you will need to get new ones, and probably othernew parts for your safety belt system. See ReplacingRestraint System Parts After a Crash on page 1-66.

Safety Belt ExtenderIf the vehicle’s safety belt will fasten around you, youshould use it.

But if a safety belt is not long enough, your dealer willorder you an extender. It is free. When you go in toorder it, take the heaviest coat you will wear, so theextender will be long enough for you. To help avoidpersonal injury, do not let someone else use it, and useit only for the seat it is made to fit. The extender hasbeen designed for adults. Never use it for securing childseats. To wear it, just attach it to the regular safetybelt. For more information, see the instruction sheet thatcomes with the extender.

1-28

Child Restraints

Older Children

Older children who have outgrown booster seats shouldwear the vehicle’s safety belts.

Q: What is the proper way to wear safety belts?

A: An older child should wear a lap-shoulder belt andget the additional restraint a shoulder belt canprovide. The shoulder belt should not cross the faceor neck. The lap belt should fit snugly below thehips, just touching the top of the thighs. It shouldnever be worn over the abdomen, which couldcause severe or even fatal internal injuries ina crash.

Accident statistics show that children are safer if theyare restrained in the rear seat.

In a crash, children who are not buckled up can strikeother people who are buckled up, or can be thrownout of the vehicle. Older children need to use safetybelts properly.

1-29

{CAUTION:

Never do this.

Here two children are wearing the same belt.The belt can not properly spread the impactforces. In a crash, the two children can becrushed together and seriously injured. A beltmust be used by only one person at a time.

Q: What if a child is wearing a lap-shoulder belt,but the child is so small that the shoulder beltis very close to the child’s face or neck?

A: If the child is sitting in a seat next to a window,move the child toward the center of the vehicle.Also see Rear Safety Belt Comfort Guides onpage 1-25. If the child is sitting in the center rearseat passenger position, move the child toward thesafety belt buckle. In either case, be sure thatthe shoulder belt still is on the child’s shoulder,so that in a crash the child’s upper body would havethe restraint the belts provide.

1-30

{CAUTION:

Never do this.

Here a child is sitting in a seat that has alap-shoulder belt, but the shoulder part isbehind the child. If the child wears the belt inthis way, in a crash the child might slide underthe belt. The belt’s force would then be appliedright on the child’s abdomen. That could causeserious or fatal injuries.

Wherever the child sits, the lap portion of the beltshould be worn low and snug on the hips, just touchingthe child’s thighs. This applies belt force to the child’spelvic bones in a crash.

1-31

Infants and Young ChildrenEveryone in a vehicle needs protection! This includesinfants and all other children. Neither the distancetraveled nor the age and size of the traveler changesthe need, for everyone, to use safety restraints. In fact,the law in every state in the United States and inevery Canadian province says children up to some agemust be restrained while in a vehicle.

Every time infants and young children ride in vehicles,they should have the protection provided by appropriaterestraints. Young children should not use the vehicle’sadult safety belts alone, unless there is no other choice.Instead, they need to use a child restraint.

{CAUTION:

People should never hold a baby in their armswhile riding in a vehicle. A baby does notweigh much — until a crash. During a crash ababy will become so heavy it is not possible tohold it. For example, in a crash at only 25 mph(40 km/h), a 12 lb (5.5 kg) baby will suddenlybecome a 240 lb (110 kg) force on a person’sarms. A baby should be secured in anappropriate restraint.

1-32

{CAUTION:

Children who are up against, or very close to,any airbag when it inflates can be seriouslyinjured or killed. Airbags plus lap-shoulderbelts offer protection for adults and olderchildren, but not for young children andinfants. Neither the vehicle’s safety belt systemnor its airbag system is designed for them.Young children and infants need the protectionthat a child restraint system can provide.

1-33

Q: What are the different types of add-on childrestraints?

A: Add-on child restraints, which are purchased by thevehicle’s owner, are available in four basic types.Selection of a particular restraint should take intoconsideration not only the child’s weight, height andage but also whether or not the restraint will becompatible with the motor vehicle in which it willbe used.

For most basic types of child restraints, there aremany different models available. When purchasing achild restraint, be sure it is designed to be used ina motor vehicle. If it is, the restraint will have alabel saying that it meets federal motor vehiclesafety standards.

The restraint manufacturer’s instructions that comewith the restraint, state the weight and heightlimitations for a particular child restraint. In addition,there are many kinds of restraints available forchildren with special needs.

{CAUTION:

Newborn infants need complete support,including support for the head and neck. This isnecessary because a newborn infant’s neck isweak and its head weighs so much comparedwith the rest of its body. In a crash, an infant in arear-facing seat settles into the restraint, so thecrash forces can be distributed across thestrongest part of an infant’s body, the back andshoulders. Infants always should be secured inappropriate infant restraints.

1-34

{CAUTION:

The body structure of a young child is quiteunlike that of an adult or older child, for whomthe safety belts are designed. A young child’ship bones are still so small that the vehicle’sregular safety belt may not remain low on thehip bones, as it should. Instead, it may settleup around the child’s abdomen. In a crash,the belt would apply force on a body area thatis unprotected by any bony structure. Thisalone could cause serious or fatal injuries.Young children always should be secured inappropriate child restraints.

Child Restraint Systems

An infant car bed (A), a special bed made for use in amotor vehicle, is an infant restraint system designedto restrain or position a child on a continuous flatsurface. Make sure that the infant’s head rests towardthe center of the vehicle.

1-35

A rear-facing infant seat (B) provides restraint withthe seating surface against the back of the infant.The harness system holds the infant in place and, in acrash, acts to keep the infant positioned in the restraint.

A forward-facing child seat (C-E) provides restraint forthe child’s body with the harness and also sometimeswith surfaces such as T-shaped or shelf-like shields.

1-36

A booster seat (F-G) is a child restraint designed toimprove the fit of the vehicle’s safety belt system. Somebooster seats have a shoulder belt positioner, and somehigh-back booster seats have a five-point harness.A booster seat can also help a child to see out thewindow.

Q: How Should I Use a Child Restraint?

A: A child restraint system is any device designed foruse in a motor vehicle to restrain, seat, or positionchildren. A built-in child restraint system is apermanent part of the motor vehicle. An add-onchild restraint system is a portable one, whichis purchased by the vehicle’s owner. To help reduceinjuries, an add-on child restraint must be securedin the vehicle. With built-in or add-on childrestraints, the child has to be secured within thechild restraint.

When choosing an add-on child restraint, be surethe child restraint is designed to be used in avehicle. If it is, it will have a label saying that itmeets federal motor vehicle safety standards. Thenfollow the instructions for the restraint. You mayfind these instructions on the restraint itself or in abooklet, or both.

1-37

Securing an Add-on Child Restraint inthe Vehicle

{CAUTION:

A child can be seriously injured or killed in acrash if the child restraint is not properlysecured in the vehicle. Make sure the childrestraint is properly installed in the vehicleusing the vehicle’s safety belt or LATCHsystem, following the instructions that camewith that restraint, and also the instructions inthis manual.

To help reduce the chance of injury, the child restraintmust be secured in the vehicle. Child restraint systemsmust be secured in vehicle seats by lap belts or thelap belt portion of a lap-shoulder belt, or by the LATCHsystem. See Lower Anchors and Tethers for Children(LATCH) on page 1-41 for more information. A child canbe endangered in a crash if the child restraint is notproperly secured in the vehicle.

When securing an add-on child restraint, refer to theinstructions that come with the restraint which may beon the restraint itself or in a booklet, or both, and to thismanual. The child restraint instructions are important,so if they are not available, obtain a replacementcopy from the manufacturer.

Keep in mind that an unsecured child restraint can movearound in a collision or sudden stop and injure peoplein the vehicle. Be sure to properly secure any childrestraint in your vehicle — even when no child is in it.

1-38

Securing the Child Within the ChildRestraintThere are several systems for securing the child withinthe child restraint. One system, the three-pointharness, has straps that come down over each of theinfant’s shoulders and buckle together at the crotch.The five-point harness system has two shoulder straps,two hip straps, and a crotch strap. A shield may takethe place of hip straps. A T-shaped shield has shoulderstraps that are attached to a flat pad which rests lowagainst the child’s body. A shelf- or armrest-type shieldhas straps that are attached to a wide, shelf-likeshield that swings up or to the side.

{CAUTION:

A child can be seriously injured or killed in acrash if the child is not properly secured in thechild restraint. Make sure the child is properlysecured, following the instructions that camewith that restraint.

Because there are different systems, it is important torefer to the instructions that come with the restraint.A child can be endangered in a crash if the child is notproperly secured in the child restraint.

1-39

Where to Put the RestraintAccident statistics show that children are safer if theyare restrained in the rear rather than the front seat.We recommend that child restraints be secured in a rearseat, including an infant riding in a rear-facing infantseat, a child riding in a forward-facing child seat and anolder child riding in a booster seat.

Your vehicle has a rear seat that will accommodate arear-facing child restraint. A label on your sun visor says,“Never put a rear-facing child seat in the front.” Thisis because the risk to the rear-facing child is so great,if the airbag deploys.

{CAUTION:

A child in a rear-facing child restraint can beseriously injured or killed if the right frontpassenger’s airbag inflates. This is becausethe back of the rear-facing child restraintwould be very close to the inflating airbag.

CAUTION: (Continued)


Even though the passenger sensing system isdesigned to turn off the passenger’s frontalairbag if the system detects a rear-facing childrestraint, no system is fail-safe, and no onecan guarantee that an airbag will not deployunder some unusual circumstance, eventhough it is turned off. We recommend thatrear-facing child restraints be secured in therear seat, even if the airbag is off.

If you need to secure a forward-facing childrestraint in the right front seat, always movethe front passenger seat as far back as it willgo. It is better to secure the child restraint in arear seat.

Wherever you install a child restraint, be sure to securethe child restraint properly.

Keep in mind that an unsecured child restraint can movearound in a collision or sudden stop and injure peoplein the vehicle. Be sure to properly secure any childrestraint in your vehicle — even when no child is in it.

1-40

Lower Anchors and Tethers forChildren (LATCH)Your vehicle has the LATCH system. The LATCHsystem holds a child restraint during driving or in acrash. This system is designed to make installation of achild restraint easier. The LATCH system uses anchorsin the vehicle and attachments on the child restraintthat are made for use with the LATCH system

Make sure that a LATCH-compatible child restraint isproperly installed using the anchors, or use the vehicle’ssafety belts to secure the restraint, following theinstructions that came with that restraint, and also theinstructions in this manual. When installing a childrestraint with a top tether, you must also use either thelower anchors or the safety belts to properly securethe child restraint. A child restraint must never beinstalled using only the top tether and anchor.

In order to use the LATCH system in your vehicle,you need a child restraint equipped with LATCHattachments. The child restraint manufacturer willprovide you with instructions on how to use the childrestraint and its attachments. The following explainshow to attach a child restraint with these attachments inyour vehicle.

Your vehicle has lower anchors and top tether anchors.Your child restraint may have lower attachments anda top tether.

Not all vehicle seating positions or child restraints havelower anchors and attachments or top tether anchorsand attachments.

Lower Anchors

Lower anchors (A) are metal bars built into the vehicle.There are two lower anchors for each LATCH seatingposition that will accommodate a child restraint withlower attachments (B).

1-41

Top Tether Anchor

A top tether (A, C) anchors the top of the child restraintto the vehicle. A top tether anchor is built into thevehicle. The top tether attachment (B) on the childrestraint connects to the top tether anchor in the vehiclein order to reduce the forward movement and rotationof the child restraint during driving or in a crash.

Your child restraint may have a single tether (A) or adual tether (C). Either will have a single attachment (B)to secure the top tether to the anchor.

Some top tether-equipped child restraints are designedfor use with or without the top tether being attached.Others require the top tether always to be attached.

In Canada, the law requires that forward-facing childrestraints have a top tether, and that the tether beattached. In the United States, some child restraints alsohave a top tether. Be sure to read and follow theinstructions for your child restraint.

If the child restraint does not have a top tether, one canbe obtained, in kit form, for many child restraints. Askthe child restraint manufacturer whether or not a kitis available.

Lower Anchor and Top Tether AnchorLocations

i (Top Tether Anchor):Seating positions with toptether anchors.

j (Lower Anchor):Seating positions withtwo lower anchors.

Each rear seating position has two exposed metal loweranchors in the crease between the seatback and theseat cushion.

Rear Seat

1-42

To assist you in locatingthe top tether anchors,the top tether anchorsymbol is located on thetrim cover.

The top tether anchors are located under the trimcovers on the rear seatback filler panel. Pull open thetrim cover to access the anchor. Be sure to use ananchor located on the same side of the vehicle as theseating position where the child restraint will be placed.

Do not secure a child restraint in the right frontpassenger’s position if a national or local law requiresthat the top tether be attached, or if the instructions thatcome with the child restraint say that the top tether mustbe attached. There is no place to attach the top tether inthis position.Accident statistics show that children are safer if theyare restrained in the rear rather than the front seat.See Where to Put the Restraint on page 1-40 foradditional information.

1-43

Securing a Child Restraint Designed forthe LATCH System

{CAUTION:

If a LATCH-type child restraint is not attachedto anchors, the restraint will not be able toprotect the child correctly. In a crash, the childcould be seriously injured or killed. Make surethat a LATCH-type child restraint is properlyinstalled using the anchors, or use thevehicle’s safety belts to secure the restraint,following the instructions that came with thatrestraint, and also the instructions in thismanual.

{CAUTION:

Each top tether anchor and lower anchor in thevehicle is designed to hold only one childrestraint. Attaching more than one childrestraint to a single anchor could cause theanchor or attachment to come loose or evenbreak during a crash. A child or others couldbe injured if this happens. To help preventinjury to people and damage to your vehicle,attach only one child restraint per anchor.

1. Attach and tighten the lower attachments to thelower anchors. If the child restraint does not havelower attachments or the desired seating positiondoes not have lower anchors, secure the childrestraint with the top tether and the safety belts.Refer to your child restraint manufacturerinstructions and the instructions in this manual.

1.1. Find the lower anchors for the desiredseating position.

1.2. Put the child restraint on the seat.1.3. Attach and tighten the lower attachments on

the child restraint to the lower anchors.

1-44

2. If the child restraint manufacturer recommends thatthe top tether be attached, attach and tighten thetop tether to the top tether anchor, if equipped.Refer to the child restraint instructions andthe following steps:

2.1. Find the top tether anchor.2.2. Pull open the top tether anchor trim cover to

expose the anchor.2.3. Route, attach, and tighten the top tether

according to your child restraint instructionsand the following instructions:

If the position you areusing does not have ahead restraint and you areusing a single tether,route the tether over theseatback.

If the position you areusing does not have ahead restraint and you areusing a dual tether,route the tether over theseatback.

If the position you areusing has a fixed headrestraint and you are usinga single tether, route thetether over the headrestraint.

If the position you areusing has a fixed oradjustable head restraintand you are using adual tether, route the tetheraround the head restraint.

3. Push and pull the child restraint in differentdirections to be sure it is secure.

1-45

Securing a Child Restraint in a RearSeat PositionIf your child restraint is equipped with the LATCHsystem, see Lower Anchors and Tethers for Children(LATCH) on page 1-41.

If your child restraint does not have the LATCH system,you will be using the lap-shoulder belt to secure thechild restraint in this position. Be sure to follow theinstructions that came with the child restraint. Securethe child in the child restraint when and as theinstructions say.

1. Put the child restraint on the seat.

2. Pick up the latch plate, and run the lap and shoulderportions of the vehicle’s safety belt through oraround the restraint. The child restraint instructionswill show you how.

3. Buckle the belt. Make sure the release button ispositioned so you would be able to unbuckle thesafety belt quickly if you ever had to.

1-46

4. Pull the rest of the shoulder belt all the way out ofthe retractor to set the lock.

5. To tighten the belt, push down on the child restraint,pull the shoulder portion of the belt to tighten thelap portion of the belt and feed the shoulderbelt back into the retractor. If you are using aforward-facing child restraint, you may find it helpfulto use your knee to push down on the childrestraint as you tighten the belt.

1-47

6. If your child restraint manufacturer recommendsusing a top tether, attach and tighten the toptether to the top tether anchor. Refer to theinstructions that came with the child restraint andsee Lower Anchors and Tethers for Children(LATCH) on page 1-41.


To remove the child restraint, if the top tether is attachedto the top tether anchor, disconnect it. Unbuckle thevehicle’s safety belt and let it go back all the way. Thesafety belt will move freely again and be ready to work foran adult or larger child passenger.

Securing a Child Restraint in theRight Front Seat PositionYour vehicle has a right front passenger’s airbag. A rearseat is a safer place to secure a forward-facing childrestraint. See Where to Put the Restraint on page 1-40.In addition, your vehicle may have the passengersensing system. The passenger sensing system isdesigned to turn off the right front passenger’s frontalairbag when an infant in a rear-facing infant seator a small child in a forward-facing child restraint orbooster seat is detected. See Passenger SensingSystem on page 1-60 and Passenger Airbag StatusIndicator on page 3-26 for more information onthis including important safety information.

A label on your sun visor says, “Never put a rear-facingchild seat in the front.” This is because the risk to therear-facing child is so great, if the airbag deploys.

{CAUTION:


Even though the passenger sensing system isdesigned to turn off the passenger’s frontalairbag if the system detects a rear-facing childrestraint, no system is fail-safe, and no onecan guarantee that an airbag will not deployunder some unusual circumstance, eventhough it is turned off. We recommend thatrear-facing child restraints be secured in therear seat, even if the airbag is off.

If you need to secure a forward-facing child restraint inthe right front seat position, move the seat as far backas it will go before securing the forward-facing childrestraint. See Manual Seats on page 1-2.

1-48

If your child restraint is equipped with the LATCHsystem, see Lower Anchors and Tethers for Children(LATCH) on page 1-41.

There is no top tether anchor at the right front seatingposition. Do not secure a child restraint in this position ifa national or local law requires that the top tether beanchored or if the instructions that come with the childrestraint say that the top tether must be anchored.See Lower Anchors and Tethers for Children (LATCH)on page 1-41 if your child restraint has a top tether.

You will be using the lap-shoulder belt to securethe child restraint in this position. Be sure to follow theinstructions that came with the child restraint. Securethe child in the child restraint when and as theinstructions say.

1. Your vehicle has a right front passenger’s frontalairbag. See Passenger Sensing System onpage 1-60. General Motors recommends thatrear-facing child restraints be secured in a rear seat,even if the airbag is off. If your child restraint isforward-facing, move the seat as far back as it willgo before securing the child restraint in thisseat. See Manual Seats on page 1-2.When the passenger sensing system has turned offthe right front passenger’s frontal airbag, the offindicator in the passenger airbag status indicatorshould light and stay lit when you turn the ignition toRUN or START. See Passenger Airbag StatusIndicator on page 3-26.

2. Put the child restraint on the seat.

3. Pick up the latch plate, and run the lap and shoulderportions of the vehicle’s safety belt through oraround the restraint. The child restraint instructionswill show you how.

4. Buckle the belt. Make sure the release button ispositioned so you would be able to unbuckle thesafety belt quickly if you ever had to.

1-49

5. Pull the rest of the shoulder belt all the way out ofthe retractor to set the lock.

6. To tighten the belt, push down on the child restraint,pull the shoulder portion of the belt to tighten thelap portion of the belt and feed the shoulder beltback into the retractor. If you are using aforward-facing child restraint, you may find it helpfulto use your knee to push down on the child restraintas you tighten the belt. You should not be ableto pull more of the belt from the retractor once thelock has been set.

1-50


8. If your vehicle has a passenger sensing system andthe airbag is off, the off indicator on the instrumentpanel will be lit and stay lit when the key isturned to RUN or START.

If a child restraint has been installed and the onindicator is lit, turn the vehicle off. Remove the childrestraint from the vehicle and reinstall the child restraint.

If after reinstalling the child restraint and restartingthe vehicle, the on indicator is still lit, check to makesure that the vehicle’s seatback is not pressing the childrestraint into the seat cushion. If this happens, slightlyrecline the vehicle’s seatback and adjust the seatcushion if possible. Also make sure the child restraint isnot trapped under the vehicle head restraint. If thishappens, adjust the head restraint.

If the on indicator is still lit, secure the child in the childrestraint in a rear seat position in the vehicle andcheck with your dealer.

To remove the child restraint, just unbuckle the vehicle’ssafety belt and let it go back all the way. The safetybelt will move freely again and be ready to work for anadult or larger child passenger.

Airbag SystemYour vehicle has a frontal airbag for the driver and afrontal airbag for the right front passenger. Your vehiclemay also have roof-mounted side impact airbags.Roof-mounted side impact airbags are available for thedriver and the passenger seated directly behind thedriver and for the right front passenger and thepassenger seated directly behind that passenger.

If your vehicle has side impact airbags, the wordAIRBAG will appear on the airbag covering on thegarnish trim near the ceiling and the side windows.

Frontal airbags are designed to help reduce the risk ofinjury from the force of an inflating frontal airbag.But these airbags must inflate very quickly to do theirjob and comply with federal regulations.

1-51

Here are the most important things to know about theairbag system:

{CAUTION:

You can be severely injured or killed in a crashif you are not wearing your safety belt — evenif you have airbags. Wearing your safety beltduring a crash helps reduce your chance ofhitting things inside the vehicle or beingejected from it. Airbags are “supplementalrestraints” to the safety belts. All airbags aredesigned to work with safety belts but do notreplace them.



Frontal airbags for the driver and right frontpassenger are designed to deploy in moderateto severe frontal and near frontal crashes. Theyare not designed to inflate in rollover, rearcrashes, or in many side crashes. And, for someunrestrained occupants, frontal airbags mayprovide less protection in frontal crashes thanmore forceful airbags have provided in the past.

Roof-mounted side impact airbags are designedto inflate in moderate to severe crashes wheresomething hits the side of your vehicle. Theyare not designed to inflate in frontal, in rolloveror in rear crashes. Everyone in your vehicleshould wear a safety belt properly — whether ornot there is an airbag for that person.

1-52

{CAUTION:

Both frontal and side impact airbags inflatewith great force, faster than the blink of aneye. If you are too close to an inflating airbag,as you would be if you were leaning forward,it could seriously injure you. Safety belts helpkeep you in position for airbag inflation beforeand during a crash. Always wear your safetybelt even with frontal airbags. The drivershould sit as far back as possible while stillmaintaining control of the vehicle. Occupantsshould not lean on or sleep against the door.

{CAUTION:

Anyone who is up against, or very close to, anyairbag when it inflates can be seriously injuredor killed. Airbags plus lap-shoulder belts offerthe best protection for adults, but not for youngchildren and infants. Neither the vehicle’s safetybelt system nor its airbag system is designedfor them. Young children and infants need theprotection that a child restraint system canprovide. Always secure children properly inyour vehicle. To read how, see Older Childrenon page 1-29 or Infants and Young Children onpage 1-32.

1-53

There is an airbagreadiness light on theinstrument panel cluster,which shows the airbagsymbol.

The system checks the airbag electrical system formalfunctions. The light tells you if there is an electricalproblem. See Airbag Readiness Light on page 3-25for more information.

Where Are the Airbags?

The driver’s airbag is in the middle of the steering wheel.

1-54

The right front passenger’s airbag is in the instrumentpanel on the passenger’s side.

If your vehicle has a side impact airbag for the driverand the person seated directly behind the driver,it is located in the ceiling above the side windows.

1-55

If your vehicle has a side impact airbag for the rightfront passenger and the person directly behind thatpassenger, it is located in the ceiling above theside windows.

{CAUTION:

If something is between an occupant and anairbag, the bag might not inflate properly or itmight force the object into that person causingsevere injury or even death. The path of aninflating airbag must be kept clear. Do not putanything between an occupant and an airbag,and do not attach or put anything on thesteering wheel hub or on or near any otherairbag covering. And, if your vehicle hasroof-mounted side impact airbags, neversecure anything to the roof of your vehicle byrouting the rope or tiedown through any dooror window opening. If you do, the path of aninflating side impact airbag will be blocked.The path of an inflating airbag must bekept clear.

1-56

When Should an Airbag Inflate?The driver’s and right front passenger’s frontal airbagsare designed to inflate in moderate to severe frontalor near-frontal crashes. But they are designed to inflateonly if the impact exceeds a predetermined deploymentthreshold. Deployment thresholds take into accounta variety of desired deployment and non-deploymentevents and are used to predict how severe a crashis likely to be in time for the airbags to inflate and helprestrain the occupants. Whether your frontal airbagswill or should deploy is not based on how fast yourvehicle is traveling. It depends largely on what you hit,the direction of the impact and how quickly yourvehicle slows down.

In addition, your vehicle has “dual-stage” frontal airbags,which adjust the restraint according to crash severity.Your vehicle is equipped with an electronic frontal sensorwhich helps the sensing system distinguish between amoderate frontal impact and a more severe frontalimpact. For moderate frontal impacts, these airbagsinflate at a level less than full deployment. For moresevere frontal impacts, full deployment occurs. If the frontof your vehicle goes straight into a wall that does notmove or deform, the threshold level for the reduceddeployment is about 12 to 16 mph (19 to 26 km/h),and the threshold level for a full deployment is about18 to 24 mph (29 to 38.5 km/h).

The threshold level can vary, however, with specificvehicle design, so that it can be somewhat above orbelow this range.

Frontal airbags may inflate at different crash speeds.For example:

• If the vehicle hits a stationary object, the airbagscould inflate at a different crash speed than if thevehicle hits a moving object.

• If the vehicle hits an object that deforms, theairbags could inflate at a different crash speed thanif the vehicle hits an object that does not deform.

• If the vehicle hits a narrow object (like a pole) theairbags could inflate at a different crash speedthan if the vehicle hits a wide object (like a wall).

• If the vehicle goes into an object at an angle theairbags could inflate at a different crash speedthan if the vehicle goes straight into the object.

Frontal airbags (driver and right front passenger) are notintended to inflate during vehicle rollovers, rearimpacts, or in many side impacts.

Your vehicle may or may not have side impact airbags.See Airbag System on page 1-51. Side impact airbagsare intended to inflate in moderate to severe sidecrashes. A side impact airbag will inflate if the crashseverity is above the system’s designed threshold level.

1-57

The threshold level can vary with specific vehicledesign. Side impact airbags are not intended to inflatein frontal or near-frontal impacts, rollovers or rearimpacts. A side impact airbag is intended to deploy onthe side of the vehicle that is struck.

In any particular crash, no one can say whether anairbag should have inflated simply because of thedamage to a vehicle or because of what the repair costswere. For frontal airbags, inflation is determined bywhat the vehicle hits, the angle of the impact, and howquickly the vehicle slows down. For side impact airbags,inflation is determined by the location and severity ofthe impact.

What Makes an Airbag Inflate?In an impact of sufficient severity, the airbagsensing system detects that the vehicle is in a crash.The sensing system triggers a release of gas fromthe inflator, which inflates the airbag. The inflator, airbag,and related hardware are all part of the airbag modulesinside the steering wheel and in the instrument panelin front of the right front passenger. For vehicles withside impact airbags, there are also airbag modules in theceiling of the vehicle, near the side windows.

How Does an Airbag Restrain?In moderate to severe frontal or near frontal collisions,even belted occupants can contact the steering wheel orthe instrument panel. In moderate to severe sidecollisions, even belted occupants can contact the insideof the vehicle. The airbag supplements the protectionprovided by safety belts. Airbags distribute the force ofthe impact more evenly over the occupant’s upperbody, stopping the occupant more gradually. But thefrontal airbags would not help you in many types ofcollisions, including rollovers, rear impacts, and manyside impacts, primarily because an occupant’s motion isnot toward the airbag. Side impact airbags would nothelp you in many types of collisions, including manyfrontal or near frontal collisions, and rear impacts,primarily because an occupant’s motion is not towardthose airbags. Airbags should never be regarded asanything more than a supplement to safety belts, andthen only in moderate to severe frontal or near-frontalcollisions for the driver’s and right front passenger’sfrontal airbags, and only in moderate to severeside collisions for side impact airbags.

1-58

What Will You See After anAirbag Inflates?After a frontal airbag inflates, it quickly deflates,so quickly that some people may not even realize theairbag inflated. Roof-mounted side impact airbagsdeflate more slowly and may still be at least partiallyinflated minutes after the vehicle comes to rest. Somecomponents of the airbag module — the steeringwheel hub for the driver’s airbag, the instrument panelfor the right front passenger’s airbag or the garnishtrim near the ceiling and the side windows— may be hotfor a short time. The parts of the airbag that comeinto contact with you may be warm, but not too hot totouch. There will be some smoke and dust coming fromthe vents in the deflated airbags. Airbag inflation doesnot prevent the driver from seeing out of the windshieldor being able to steer the vehicle, nor does it stoppeople from leaving the vehicle.

{CAUTION:

When an airbag inflates, there is dust in theair. This dust could cause breathing problemsfor people with a history of asthma or otherbreathing trouble. To avoid this, everyone inthe vehicle should get out as soon as it is safeto do so. If you have breathing problems butcannot get out of the vehicle after an airbaginflates, then get fresh air by opening awindow or a door. If you experience breathingproblems following an airbag deployment, youshould seek medical attention.

Your vehicle has a feature that may automaticallyunlock the doors, turn the interior lamps on, turn thehazard warning flashers on and turn off the climatecontrol system when the airbags inflate (if battery poweris available). You can lock the doors again, turn theinterior lamps off, turn the hazard warning flashers offand turn the climate control system on by using thecontrols for those features.

1-59

In many crashes severe enough to inflate an airbag,windshields are broken by vehicle deformation.Additional windshield breakage may also occur from theright front passenger airbag.

• Airbags are designed to inflate only once. Afteran airbag inflates, you will need some new partsfor your airbag system. If you do not get them,the airbag system will not be there to help protectyou in another crash. A new system will includeairbag modules and possibly other parts. Theservice manual for your vehicle covers the need toreplace other parts.

• Your vehicle is equipped with a crash sensing anddiagnostic module which records information aftera crash. See Vehicle Data Collection and EventData Recorders on page 7-11.

• Let only qualified technicians work on your airbagsystem. Improper service can mean that yourairbag system will not work properly. See yourdealer for service.

Passenger Sensing SystemIf your vehicle has one of the indicators pictured in thefollowing illustrations, then your vehicle has a passengersensing system for the right front passenger’s position.A passenger airbag status indicator on the instrumentpanel will be visible when you turn your ignition key toSTART or RUN. The words ON and OFF, or the symbolfor ON and OFF, will be visible on the instrument panelduring the system check. When the system check iscomplete, either the word ON or the word OFF, or thesymbol for ON or the symbol for OFF will be visible.See Passenger Airbag Status Indicator on page 3-26.

The passenger sensing system will turn off the rightfront passenger’s frontal airbag under certain conditions.The driver’s airbag and the side airbags (if equipped)are not part of the passenger sensing system.

United States Canada

1-60

The passenger sensing system works with sensorsthat are part of the right front passenger’s seat andsafety belt. The sensors are designed to detectthe presence of a properly-seated occupant anddetermine if the passenger’s frontal airbag should beenabled (may inflate) or not.Accident statistics show that children are safer if theyare restrained in the rear rather than the front seat.General Motors recommends that child restraintsbe secured in a rear seat, including an infant riding in arear-facing infant seat, a child riding in a forward-facingchild seat and an older child riding in a booster seat.Your vehicle has a rear seat that will accommodatea rear-facing child restraint. A label on your sun visorsays, “Never put a rear-facing child seat in the front.”This is because the risk to the rear-facing child isso great, if the airbag deploys.

{CAUTION:


Even though the passenger sensing system isdesigned to turn off the passenger’s frontalairbag if the system detects a rear-facing childrestraint, no system is fail-safe, and no one canguarantee that an airbag will not deploy undersome unusual circumstance, even though it isturned off. We recommend that rear-facing childrestraints be secured in the rear seat, even if theairbag is off.

If you need to secure a forward-facing childrestraint in the right front seat, always movethe front passenger seat as far back as it will go.It is better to secure the child restraint in arear seat.

1-61

The passenger sensing system is designed to turn offthe right front passenger’s frontal airbag if:

• the right front passenger seat is unoccupied

• the system determines that an infant is present in arear-facing infant seat

• the system determines that a small child is presentin a forward-facing child restraint

• the system determines that a small child is presentin a booster seat

• a right front passenger takes his/her weight off ofthe seat for a period of time

• the right front passenger seat is occupied by asmaller person, such as a child who has outgrownchild restraints

• or if there is a critical problem with the airbagsystem or the passenger sensing system.

When the passenger sensing system has turned off thepassenger’s frontal airbag, the off indicator on theinstrument panel will light and stay lit to remind you thatthe airbag is off.

If a child restraint has been installed and the onindicator is lit, turn the vehicle off. Remove the childrestraint from the vehicle and reinstall the child restraintfollowing the child restraint manufacturer’s directionsand refer to Securing a Child Restraint in the Right FrontSeat Position on page 1-48.

If after reinstalling the child restraint and restarting thevehicle, the on indicator is still lit, check to make surethat the vehicle’s seatback is not pressing the childrestraint into the seat cushion. If this happens, slightlyrecline the vehicle’s seatback and adjust the seatcushion if possible. Also make sure the child restraint isnot trapped under the vehicle head restraint. If thishappens, adjust the head restraint.

If the on indicator is still lit, secure the child in the childrestraint in a rear seat position in the vehicle and checkwith your dealer.

The passenger sensing system is designed to enable(may inflate) the right front passenger’s frontal airbaganytime the system senses that a person of adult size issitting properly in the right front passenger’s seat.When the passenger sensing system has allowed theairbag to be enabled, the on indicator will light and staylit to remind you that the airbag is active.

For some children who have outgrown child restraintsand for very small adults, the passenger sensing systemmay or may not turn off the right front passenger’sfrontal airbag, depending upon the person’s seatingposture and body build. Everyone in your vehicle whohas outgrown child restraints should wear a safety beltproperly — whether or not there is an airbag for thatperson.

1-62

If a person of adult-size is sitting in the right frontpassenger’s seat, but the off indicator is lit, it could bebecause that person is not sitting properly in the seat.If this happens, turn the vehicle off and ask the person toplace the seatback in the fully upright position, then situpright in the seat, centered on the seat cushion, with theperson’s legs comfortably extended. Restart the vehicleand have the person remain in this position for abouttwo minutes. This will allow the system to detect thatperson and then enable the passenger’s airbag.

{CAUTION:

If the airbag readiness light in the instrumentpanel cluster ever comes on and stays on, itmeans that something may be wrong with theairbag system. If this ever happens, have thevehicle serviced promptly, because anadult-size person sitting in the right frontpassenger’s seat may not have the protectionof the frontal airbag. See Airbag ReadinessLight on page 3-25 for more on this, includingimportant safety information.

1-63

Aftermarket equipment, such as seat covers, can affecthow well the passenger sensing system operates.You may want to consider not using seat covers or otheraftermarket equipment if your vehicle has the passengersensing system. See Adding Equipment to YourAirbag-Equipped Vehicle on page 1-65 for moreinformation about modifications that can affect how thesystem operates.

{CAUTION:

Stowing of articles under the passenger’s seator between the passenger’s seat cushion andseatback may interfere with the properoperation of the passenger sensing system.

Servicing Your Airbag-EquippedVehicleAirbags affect how your vehicle should be serviced.There are parts of the airbag system in several placesaround your vehicle. You do not want the system toinflate while someone is working on your vehicle.Your dealer and the service manual have informationabout servicing your vehicle and the airbag system.To purchase a service manual, see Service PublicationsOrdering Information on page 7-17.

{CAUTION:

For up to 20 seconds after the ignition key isturned off and the battery is disconnected, anairbag can still inflate during improper service.You can be injured if you are close to anairbag when it inflates. Avoid yellowconnectors. They are probably part of theairbag system. Be sure to follow properservice procedures, and make sure the personperforming work for you is qualified to do so.

The airbag system does not need regular maintenance.

1-64

Adding Equipment to YourAirbag-Equipped Vehicle

Q: Is there anything I might add to the front orsides of the vehicle that could keep theairbags from working properly?

A: Yes. If you add things that change your vehicle’sframe, bumper system, front end or side sheetmetal or height, they may keep the airbag systemfrom working properly. Also, the airbag system maynot work properly if you relocate any of the airbagsensors. If you have any questions about this,you should contact Customer Assistance before youmodify your vehicle. The phone numbers andaddresses for Customer Assistance are in Step Twoof the Customer Satisfaction Procedure in thismanual. See Customer Satisfaction Procedure onpage 7-2.

Q: Because I have a disability, I have to get myvehicle modified. How can I find out whetherthis will affect my airbag system?

A: Changing or moving any parts of the front seats,safety belts, the airbag sensing and diagnosticmodule (located under the center console), or theinstrument panel can affect the operation ofthe airbag system. If you have questions, callCustomer Assistance. The phone numbers andaddresses for Customer Assistance are in Step Twoof the Customer Satisfaction Procedure in thismanual. See Customer Satisfaction Procedure onpage 7-2.

1-65

Restraint System Check

Checking the Restraint SystemsNow and then, make sure the safety belt reminder lightand all your belts, buckles, latch plates, retractorsand anchorages are working properly. Look for any otherloose or damaged safety belt system parts. If you seeanything that might keep a safety belt system from doingits job, have it repaired.

Torn or frayed safety belts may not protect you in acrash. They can rip apart under impact forces. If a beltis torn or frayed, get a new one right away.

Also look for any opened or broken airbag covers,and have them repaired or replaced. (The airbag systemdoes not need regular maintenance.)

Notice: If you damage the covering for the driver’sor the right front passenger’s airbag, or the sideimpact airbag covering (if equipped) on the garnishtrim near the ceiling and the side windows, the airbagmay not work properly. You may have to replace theairbag module in the steering wheel, both the airbagmodule and the instrument panel for the right frontpassenger’s airbag, or the side impact airbag moduleand the garnish trim near the ceiling and the sidewindows for roof-mounted side impact airbags(if equipped). Do not open or break the airbagcoverings.

Replacing Restraint System PartsAfter a Crash

{CAUTION:

A crash can damage the restraint systems inyour vehicle. A damaged restraint system maynot properly protect the person using it,resulting in serious injury or even death in acrash. To help make sure your restraintsystems are working properly after a crash,have them inspected and any necessaryreplacements made as soon as possible.

If you have had a crash, do you need new belts orLATCH system parts?

After a very minor collision, nothing may be necessary.But if the belts were stretched, as they would be ifworn during a more severe crash, then you neednew parts.

1-66

If the LATCH system was being used during a moresevere crash, you may need new LATCH system parts.

If belts are cut or damaged, replace them. Collisiondamage also may mean you will need to have LATCHsystem, safety belt or seat parts repaired or replaced.New parts and repairs may be necessary even if the beltor LATCH system was not being used at the time ofthe collision.

If an airbag inflates, you will need to replace airbagsystem parts. See the part on the airbag system earlierin this section.

If the frontal airbags inflate you will also need to replacethe driver and front passenger’s safety belt retractorassembly. Be sure to do so. Then the new retractorassembly will be there to help protect you in a collision.

After a crash you may need to replace the driver andfront passenger’s safety belt retractor assemblies, evenif the frontal airbags have not deployed. The driverand front passenger’s safety belt retractor assembliescontain the safety belt pretensioners. Have yoursafety belt pretensioners checked if your vehicle hasbeen in a collision, or if your airbag readiness light stayson after you start your vehicle or while you are driving.See Airbag Readiness Light on page 3-25.

1-67

✍ NOTES

1-68

Keys ...............................................................2-2Remote Keyless Entry System .........................2-3Remote Keyless Entry System Operation ...........2-4

Doors and Locks .............................................2-7Door Locks ....................................................2-7Power Door Locks ..........................................2-8Delayed Locking .............................................2-8Automatic Door Lock .......................................2-9Programmable Automatic Door Unlock ...............2-9Rear Door Security Locks ................................2-9Lockout Protection ........................................2-10Trunk ..........................................................2-10

Windows ........................................................2-12Manual Windows ..........................................2-13Power Windows ............................................2-13Sun Visors ...................................................2-13

Theft-Deterrent Systems ..................................2-14Content Theft-Deterrent .................................2-14PASS-Key® III+ ............................................2-15PASS-Key® III+ Operation ..............................2-16

Starting and Operating Your Vehicle ................2-17New Vehicle Break-In ....................................2-17Ignition Positions ..........................................2-18Retained Accessory Power (RAP) ...................2-20Starting the Engine .......................................2-20Engine Coolant Heater ..................................2-22

Automatic Transaxle Operation .......................2-23Manual Transaxle Operation ...........................2-25Parking Brake ..............................................2-27Shifting Into Park (P) (Automatic Transaxle) ......2-28Shifting Out of Park (P) (Automatic Transaxle) .....2-30Parking Your Vehicle (Manual Transaxle) .........2-30Parking Over Things That Burn .......................2-31Engine Exhaust ............................................2-31Running the Engine While Parked ...................2-32

Mirrors ...........................................................2-33Manual Rearview Mirror .................................2-33Automatic Dimming Rearview

Mirror with OnStar® ...................................2-33Outside Manual Mirror ...................................2-33Outside Remote Control Mirror .......................2-33Outside Power Mirrors ...................................2-34Outside Convex Mirror ...................................2-34

OnStar ® System .............................................2-35Storage Areas ................................................2-37

Glove Box ...................................................2-37Cupholder(s) ................................................2-37Center Console Storage Area .........................2-37Driver’s Storage Compartment ........................2-37Convenience Net ..........................................2-37

Sunroof .........................................................2-38

Section 2 Features and Controls

2-1

Keys

{CAUTION:

Leaving children in a vehicle with the ignitionkey is dangerous for many reasons. Theycould operate the power windows or othercontrols or even make the vehicle move.The children or others could be badly injuredor even killed. Do not leave the keys in avehicle with children.

2-2

One key is used for theignition, the doors and allother locks.

When a new vehicle is delivered, the dealer removesthe key tag from the key and gives it to the first owner.Each tag has a code on it that tells your dealer or aqualified locksmith how to make extra keys. Keep thetag in a safe place. If you lose your key, you will be ableto have a new one made easily using the tag.

If you need a new key, contact your dealer who canobtain the correct key code. See Roadside AssistanceProgram on page 7-7 for more information.

Notice: If you ever lock your keys in your vehicle,you may have to damage the vehicle to get in.Be sure you have spare keys.

If your vehicle is equipped with the OnStar® system withan active subscription and you lock your keys insidethe vehicle, OnStar® may be able to send a command tounlock your vehicle. See OnStar® System on page 2-35for more information.

Remote Keyless Entry SystemIf the vehicle has the keyless entry system, it operateson a radio frequency subject to Federal CommunicationsCommission (FCC) Rules and with Industry Canada.

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference received,including interference that may cause undesiredoperation of the device.

2-3

This device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions:



Changes or modifications to this system by other thanan authorized service facility could void authorization touse this equipment.

At times you may notice a decrease in range. This isnormal for any remote keyless entry system. If thetransmitter does not work or if you have to stand closerto your vehicle for the transmitter to work, try this:

• Check the distance. You may be too far from yourvehicle. You may need to stand closer duringrainy or snowy weather.

• Check the location. Other vehicles or objectsmay be blocking the signal. Take a few steps tothe left or right, hold the transmitter higher, and tryagain.

• Check to determine if battery replacement isnecessary. See “Battery Replacement” underRemote Keyless Entry System Operation onpage 2-4.

• If you are still having trouble, see your dealer or aqualified technician for service.

Remote Keyless Entry SystemOperationIf your vehicle has this feature, the vehicle’s doors canbe locked and unlocked, and the trunk can beunlocked from about 3 feet (1 m) up to 60 feet (18 m)away with the remote keyless entry transmitter.

If you notice a decrease in the operating range of thetransmitter, see Remote Keyless Entry System onpage 2-3 for information regarding conditions which mayaffect the transmitter’s performance.

The following functions areavailable with the remotekeyless entry system.

2-4

Q (Lock): Press the lock button to lock all the doors.If enabled through the Driver Information Center (DIC),the remote lock feedback can be programmed tohave the horn chirp and/or the parking lamps flash whenthe remote keyless entry transmitter is used to lock thevehicle’s doors. See “LOCK HORN” and “LIGHT FLASH”under DIC Vehicle Personalization on page 3-42 formore information.

Pressing the lock button may arm the contenttheft-deterrent system. See Content Theft-Deterrent onpage 2-14.

" (Unlock): Press the unlock button one time to unlockthe driver’s door. Press the unlock button again withinfive seconds to unlock the other doors. The interiorlamps will come on and stay on for 20 seconds or untilthe ignition is turned on. If enabled through the DIC,the remote unlock feedback can be programmed to havethe horn chirp and/or the turn signal lamps flash whenthe remote keyless entry transmitter is used to unlockthe vehicle’s doors. See “UNLOCK HORN” and “LIGHTFLASH” under DIC Vehicle Personalization onpage 3-42 for more information.

If enabled through the DIC, and it is dark enoughoutside, the vehicle’s high-beam headlamps and parkinglamps will come on each time the unlock button on thetransmitter is pressed. These exterior lamps will stay onfor 20 seconds, or until a door is opened. See “EXT(Exterior) LIGHTS” under DIC Vehicle Personalizationon page 3-42.

Pressing the unlock button on the remote keyless entrytransmitter will disarm the content-theft deterrentsystem. See Content Theft-Deterrent on page 2-14 formore details.

V (Remote Trunk Release): The trunk will openwhen this button on the transmitter is pressed and heldfor approximately one second. You can open the trunkwith the transmitter when the vehicle is stationary.

L (Vehicle Locator/Panic Alarm): Press and releasethis button to help locate your vehicle. The horn willsound three times and the hazard lamps will flashthree times. Press and hold the button for three secondsto sound the panic alarm. The horn will sound and thehazard lamps will flash for 30 seconds. The ignition mustbe off for the vehicle locator/remote alarm to work.Press the vehicle locator/panic alarm button again orturn the ignition to ACC (Accessory) or RUN to turn offthe alarm.

2-5

Matching Transmitter(s) to YourVehicleEach remote keyless entry transmitter is uniquely codedto prevent another transmitter from unlocking thevehicle. If a transmitter is lost or stolen, a replacementcan be purchased through your GM dealer. Rememberto bring any additional transmitters with you whenyou go to your dealer. The vehicle can have a maximumof four transmitters matched to it.

Battery ReplacementUnder normal use, the battery in the remote keylessentry transmitter should last about four years.

You can tell the battery is weak if the transmitter will notwork, at the normal range, in any location. If you haveto get close to your vehicle before the transmitter works,it is probably time to change the battery. The KEY FOBBATT LOW message in the vehicle’s DIC will display,if the remote keyless entry transmitter battery is low.

Notice: When replacing the battery, use care not totouch any of the circuitry. Static from your bodytransferred to these surfaces may damage thetransmitter.

To replace the battery do the following:1. Insert a flat object with a thin edge into the notch,

located below the Vehicle Locator/Panic Alarmbutton, and pry the front and back apart.

2. Remove the old battery, but do not use a metalobject to do this.

3. Slide the new battery into the transmitter with thepositive side of the battery facing up. Use a typeCR2032 battery, or equivalent type.

4. Snap the front and the back of the transmittertogether.

5. Test the operation of the transmitter with thevehicle.

2-6

Doors and Locks

Door Locks

{CAUTION:

Unlocked doors can be dangerous.• Passengers — especially children — can

easily open the doors and fall out of amoving vehicle. When a door is locked,the handle will not open it. You increasethe chance of being thrown out of thevehicle in a crash if the doors are notlocked. So, wear safety belts properly andlock the doors whenever you drive.



• Young children who get into unlockedvehicles may be unable to get out. A childcan be overcome by extreme heat and cansuffer permanent injuries or even deathfrom heat stroke. Always lock your vehiclewhenever you leave it.

• Outsiders can easily enter through anunlocked door when you slow down orstop your vehicle. Locking your doors canhelp prevent this from happening.

There are several ways to lock and unlock your vehicle.

To lock the driver’s door from the outside, turn thekey clockwise. To unlock the door, turn the keycounterclockwise.

You can also use the remote keyless entry transmitter,if equipped, to lock and unlock the doors.

From the inside, use the manual lock knobs on eachdoor or the power door lock switch to lock and unlockall doors.

2-7

Power Door Locks

Your vehicle may havepower door locks. If so,they are located onthe driver’s and frontpassenger’s door armrest.

Press the side of the switch with the lock symbol to lockthe doors. This is the right side for the driver’s switchand the left side for the front passenger’s switch.

Press the side of the switch with the unlock symbol tounlock the doors. This is the left side for the driver’sswitch and the right side for the front passenger’s switch.

Delayed LockingIf your vehicle has power locks, it will have the delayedlocking feature.

This feature will delay the actual locking of the doors forup to five seconds when the power door lock switchor remote keyless entry transmitter is used to lock thevehicle.

If any door is open when locking the vehicle,three chimes will sound signaling that the delayedlocking feature is active. Five seconds after the lastdoor is closed, all of the doors will lock and theturn signal lamps will flash. To cancel the delay andlock the doors immediately, press the lock buttona second time.

This feature will not lock the doors if the key is in theignition.

You can disable this function through the DriverInformation Center (DIC). See DIC VehiclePersonalization on page 3-42.

Driver’s Switch shown,Front Passenger’s

Switch similar

2-8

Automatic Door LockIf your vehicle has power door locks, the doors willautomatically lock when the shift lever is moved out ofPARK (P) for a vehicle with an automatic transaxle.For a vehicle with a manual transaxle, the speed mustbe greater than 5 mph (8 km/h).

The automatic door locking feature cannot be disabled.

Programmable AutomaticDoor UnlockIf your vehicle has power locks, it has a programmableautomatic door unlock feature.

The doors can be programmed through the DriverInformation Center (DIC) to automatically unlock severalways. See DIC Vehicle Personalization on page 3-42for more information.

Rear Door Security LocksYour vehicle has rear door security locks. Theseprevent passengers from opening the rear doors fromthe inside.

The rear door securitylocks are located on theinside edge of each reardoor. You must open therear doors to access them.

To set the locks, do the following:

1. Insert the key into the security lock slot and turn itso the slot is in the horizontal position.

2. Close the door.

2-9

When you want to open a rear door when the securitylock is on, do the following:

1. Unlock the door using the remote keyless entrytransmitter, if equipped, the power door lockswitch, or by lifting the rear door manual lock.

2. Open the door from the outside.

To cancel the rear door security lock, do the following:

1. Unlock the door and open it from the outside.

2. Insert the key into the security lock slot and turn itso the slot is in the vertical position.

Lockout ProtectionIf your vehicle has power door locks, it will have thisfeature. If you press the power door lock switchwhen the key is in the ignition and any door is open,all the doors will lock and the driver’s door will unlock.Be sure to remove the key from the ignition whenlocking your vehicle.

The lockout protection can be overridden by pressingand holding the power door lock in the lock position forthree seconds.

TrunkTo release the trunk lid from the outside, use the key orthe remote keyless entry transmitter, if equipped.

{CAUTION:

It can be dangerous to drive with the trunk lidopen because carbon monoxide (CO) gas cancome into your vehicle. You cannot see orsmell CO. It can cause unconsciousness andeven death. If you must drive with the trunk lidopen or if electrical wiring or other cableconnections must pass through the sealbetween the body and the trunk lid:

• Make sure all other windows are shut.• Turn the fan on your heating or cooling

system to its highest speed and select thecontrol setting that will force outside airinto your vehicle. See Climate ControlSystem.

• If you have air outlets on or under theinstrument panel, open them all the way.

See Engine Exhaust on page 2-31.

2-10

Remote Trunk Release

To open the trunk frominside the vehicle, pressthe remote trunk releasebutton located insidethe driver’s storagecompartment located onthe lower left side ofthe instrument panel.

See Instrument Panel Overview on page 3-4 or Driver’sStorage Compartment on page 2-37.

The remote trunk release works when the ignition iseither off or in ACC, or the vehicle speed is lessthan 2 mph (3 km/h).

Emergency Trunk Release Handle

Notice: Do not use the emergency trunk releasehandle as a tie-down or anchor point when securingitems in the trunk as it could damage the handle.The emergency trunk release handle is onlyintended to aid a person trapped in a latched trunk,enabling them to open the trunk from the inside.

There is a glow-in-the-dark emergency trunk releasehandle located on the inside of the trunk lid of yourvehicle. This handle will glow following exposure to light.Pull the release handle and push the trunk lid openfrom the inside to open the trunk.

2-11

Windows

{CAUTION:

Leaving children, helpless adults, or petsin a vehicle with the windows closed isdangerous. They can be overcome by theextreme heat and suffer permanent injuries oreven death from heat stroke. Never leave achild, a helpless adult, or a pet alone in avehicle, especially with the windows closed inwarm or hot weather.

2-12

Manual WindowsIf your vehicle has manual windows, use the windowcrank to open and close each window.

Power Windows

If your vehicle has power windows, the switches on thedriver’s door armrest control each of the windows.

In addition, each passenger’s door has a window switchthat controls that door’s window. Press the front ofthe switch to open the window. Pull the front ofthe switch up to close it.

Express-Down WindowThe driver’s window switch has an express-downfeature which allows the window to be lowered fullywithout continuously pressing the switch. This switch islabeled AUTO. Press the front of the switch to thefirst position, and the driver’s window will open a smallamount. Press the switch down fully and the windowwill go all the way down.

To stop the window while it is lowering, pull the front ofthe switch up.

Window Lockout

o (Window Lockout): The driver’s window controlsalso include a lockout switch. Press the right side of theswitch to prevent the rear passengers from usingtheir window switches. The driver can still control all thewindows with the lockout on. Press the switch to theleft to return to normal window operation. A red bar onthe right side of the switch indicates that the lockoutfeature is off.

Sun VisorsTo block out glare, swing down the visor(s). The visorscan also be detached from the center mount andswung to the side to cover the windows.

Sedan Shown, CoupeSimilar

2-13

Visor Vanity MirrorYour vehicle may have a driver’s side vanity mirror.Swing down the sun visor and lift the cover to exposethe mirror.

Theft-Deterrent SystemsVehicle theft is big business, especially in some cities.Although your vehicle has a number of theft-deterrentfeatures, we know that nothing we put on it can make itimpossible to steal.

Content Theft-Deterrent

Your vehicle may have acontent theft-deterrentalarm system.

Arming the SystemWith the ignition off, you can arm the system by doingany one of the following:

• Press the remote keyless entry transmitter lockbutton.

• Press the power door lock switch while the driver’sdoor is open.

The system will arm after either of these things occur:

• Thirty seconds after all the doors are closed.

• Sixty seconds with any door open.

If you press the lock button on the transmitter a secondtime while all the doors are closed, the system willarm immediately. The system will still arm in 60 secondsif a door is open. When the open door is closed, it willalso become armed.

The security light, located on the instrument panelcluster, will turn on to indicate that arming has beeninitiated. Once the system is armed, the security light willflash once every three seconds.

If the security light is flashing twice per second, thismeans that a door is open.

If you do not want to arm the system, you may lock thecar with the manual lock knobs on the doors.

2-14

Disarming the SystemYou can disarm the system by doing any one of thefollowing:

• Press the remote keyless entry transmitter unlockbutton.

• Turn the ignition on.

If the system is armed and the trunk is opened usingthe trunk release button on the transmitter, the systemwill temporarily disarm itself and re-arm when thetrunk has been closed. This allows you to exit thevehicle, lock the doors using the transmitter, and openthe trunk using the transmitter without having todisarm and re-arm the system.

Once the system is disarmed, the security light will stopflashing.

How the System Alarm is ActivatedIf the system is armed, it can be activated by either:• Opening the driver’s door or trunk. This will cause

a ten second pre-alarm chirp followed by athirty second full alarm of horn and lights.

• Opening any other door. This will immediatelycause a full alarm of horn and lights forthirty seconds.

When an alarm event has finished, the system willre-arm itself automatically.

How to Turn Off the System AlarmTo turn off the system alarm, do one of the following:

• Press the lock button on the remote keylessentry transmitter. The system will then re-arm itself.

• Press the unlock button on the remote keyless entrytransmitter. This will also disarm the system.

• Insert the key in the ignition and turn it on. This willalso disarm the system.

How to Detect a Tamper ConditionIf you hear three chirps when you press the unlock, lock,or trunk release buttons on the remote keylesstransmitter, it means that the content theft securitysystem alarm was previously activated.

PASS-Key ® III+The PASS-Key® III+ system operates on a radiofrequency subject to Federal CommunicationsCommission (FCC) Rules and with Industry Canada.

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,including interference that may cause undesiredoperation.

2-15

This device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions:



Changes or modifications to this system by other thanan authorized service facility could void authorization touse this equipment.

PASS-Key® III+ uses a radio frequency transponder inthe key that matches a decoder in your vehicle.

PASS-Key ® III+ OperationYour vehicle is equipped with PASS-Key® III+(Personalized Automotive Security System)theft-deterrent system. PASS-Key® III+ is a passivetheft-deterrent system. This means you do not haveto do anything special to arm or disarm the system.It works when you insert or remove the key fromthe ignition.

When the PASS-Key® III+ system senses that someoneis using the wrong key, it prevents the vehicle fromstarting. Anyone using a trial-and-error method to startthe vehicle will be discouraged because of the highnumber of electrical key codes.

When trying to start the vehicle if the engine does notstart and the security light on the instrument panelcluster comes on, the key may have a damagedtransponder. Turn the ignition off and try again.

If the engine still does not start, and the key appears tobe not damaged, try another ignition key. At this time,you may also want to check the fuse, see Fusesand Circuit Breakers on page 5-93. If the engine stilldoes not start with the other key, your vehicle needsservice. If your vehicle does start, the first key maybe faulty. See your dealer who can service thePASS-Key® III+ to have a new key made. In anemergency, contact Roadside Assistance. See RoadsideAssistance Program on page 7-7.

It is possible for the PASS-Key® III+ decoder to “learn”the transponder value of a new or replacement key.Up to 10 keys may be programmed for the vehicle.The following procedure is for programming additionalkeys only. If all the currently programmed keys arelost or do not operate, you must see your dealer or alocksmith who can service PASS-Key® III+ to have keysmade and programmed to the system.

See your dealer or a locksmith who can servicePASS-Key® III+ to get a new key blank that is cutexactly as the ignition key that operates the system.

2-16

To program the new key do the following:

1. Verify that the new key has a + stamped on it.

2. Insert the already programmed key in the ignitionand start the engine. If the engine will not start,see your dealer for service.

3. After the engine has started, turn the key to LOCK,and remove the key.

4. Insert the key to be programmed and turn it to theRUN position within five seconds of the original keybeing turned to the LOCK position.

5. The security light will turn off once the key hasbeen programmed.

6. Repeat Steps 1 through 5 if additional keys are tobe programmed.

If you are ever driving and the security light comes onand stays on, you may be able to restart your engine ifyou turn it off. Your PASS-Key® III+ system, however,is not working properly and must be serviced byyour dealer. Your vehicle is not protected by thePASS-Key® III+ system at this time.

If you lose or damage your PASS-Key® III+ key,see your dealer or a locksmith who can servicePASS-Key® III+ to have a new key made.

Starting and Operating YourVehicle

New Vehicle Break-InNotice: Your vehicle does not need an elaboratebreak-in. But it will perform better in the long run ifyou follow these guidelines:• Do not drive at any one constant speed, fast

or slow, for the first 500 miles (805 km).Do not make full-throttle starts. Do not exceed5,000 engine rpm. Avoid downshifting tobrake, or slow, the vehicle.

• Avoid making hard stops for the first 200 miles(322 km) or so. During this time your new brakelinings are not yet broken in. Hard stops with newlinings can mean premature wear and earlierreplacement. Follow this breaking-in guidelineevery time you get new brake linings.

• Do not tow a trailer during break-in. See Towing aTrailer (Automatic Transaxle) on page 4-39 orTowing a Trailer (Manual Transaxle) on page 4-46for the trailer towing capabilities of your vehicleand more information.

Following break-in, engine speed and load can begradually increased.

2-17

Ignition PositionsWith the key in the ignition switch, you can turn it to fourdifferent positions.

Notice: Using a tool to force the key from theignition switch could cause damage or break thekey. Use the correct key and turn the key onlywith your hand. Make sure the key is all the way in.If it is, turn the steering wheel left and right whileyou turn the key hard. If none of this works,then your vehicle needs service.

9(LOCK): This position locks your steering column.It is a theft-deterrent feature. You will only be ableto remove your key when the ignition is turned to LOCK.

If you have an automatic transaxle, the ignition switchcannot be turned to LOCK unless the shift lever isin PARK (P).

If you have a manual transaxle, the ignition switch canbe turned to LOCK in any shift lever position.

{CAUTION:

If you have a manual transaxle removing the keyfrom the ignition switch will lock the steeringcolumn and result in a loss of ability to steer thevehicle. This could cause a collision. If you needto turn the engine off while the vehicle ismoving, turn the key to ACC.

ACC (ACCESSORY): This position operates some ofyour electrical accessories. It unlocks the steering wheeland ignition.

2-18

R (RUN): This is the position the switch returns toafter you start your engine and release the switch.The switch stays in the RUN position when the engineis running. But even when the ignition is not running,you can use RUN to operate your electrical accessoriesand to display some warning and indicator lights.

/ (START): This position starts the engine. When theengine starts, release the key. The ignition switch willreturn to RUN for normal driving.

A warning tone will sound if you open the driver’s doorwhile in LOCK or ACC, when the key has not beenremoved from the ignition.

Column Lock ReleaseThe following procedure allows the ignition to be turnedto LOCK and for ignition key removal in case of adead battery or low voltage battery.

1. Make sure the shift lever is in PARK (P).

2. Using a tool, pry off the cover from the bottom ofthe steering column.

2-19

3. Place your finger into the access hole and locatethe plunger.

4. Press and hold the plunger toward the driver’sdoor while turning the ignition key to LOCK.Remove the key.

Have your vehicle serviced at your GM dealer as soonas possible.

Retained Accessory Power (RAP)Your vehicle has a Retained Accessory Power (RAP)feature which allow’s the radio, power windows,and sunroof to continue to work up to 10 minutes afterthe ignition is turned off.

Your vehicle’s radio will work when the ignition key is inRUN or ACC. Once the key is turned from RUN toLOCK, the radio will continue to work for 10 minutes oruntil the driver’s door is opened. Also, the powerwindows and sunroof will continue to work for up to10 minutes or until any door is opened.

Starting the Engine

Automatic TransaxleMove the shift lever to PARK (P) or NEUTRAL (N).The engine will not start in any other position — that isa safety feature. To restart when you are alreadymoving, use NEUTRAL (N) only.

Notice: Shifting into PARK (P) with the vehiclemoving could damage the transaxle. Shift intoPARK (P) only when your vehicle is stopped.

2-20

Manual TransaxleThe shift lever should be in NEUTRAL and the parkingbrake engaged. Hold the clutch pedal to the floor andstart the engine. Your vehicle will not start if the clutchpedal is not all the way down — that is a safety feature.

Starting Procedure1. With your foot off the accelerator pedal, turn the

ignition to START. When the engine starts, let goof the key. The idle speed will go down as yourengine gets warm.

Notice: Holding your key in START for longer than15 seconds at a time will cause your battery tobe drained much sooner. And the excessive heatcan damage your starter motor. Wait about15 seconds between each try to help avoid drainingyour battery or damaging your starter.

2. If it does not start, wait about 15 seconds and tryagain to start the engine by turning the ignition toSTART. Wait about 15 seconds between each try.When the engine has run about 10 seconds towarm up, your vehicle is ready to be driven. Do notrun your engine at high speed when it is cold.If the weather is below freezing (32°F or 0°C),let the engine run for a few minutes to warm up.

3. If the engine still will not start, or starts but thenstops, it could be flooded with too much gasoline.Try pushing your accelerator pedal all the way to thefloor and holding it there as you hold the key inSTART for about three seconds. If the vehicle startsbriefly but then stops again, do the same thing, butthis time keep the pedal down for five or six seconds.This clears the extra gasoline from the engine.

Notice: Your engine is designed to work with theelectronics in your vehicle. If you add electricalparts or accessories, you could change the way theengine operates. Before adding electrical equipment,check with your dealer. If you do not, your enginemight not perform properly. Any resulting damagewould not be covered by your vehicle’s warranty.

2-21

Engine Coolant HeaterYour vehicle may be equipped with an engine coolantheater.

In very cold weather, 0°F (−18°C) or colder, the enginecoolant heater can help. You will get easier startingand better fuel economy during engine warm-up.

Usually, the coolant heater should be plugged in aminimum of four hours prior to starting your vehicle.At temperatures above 32°F (0°C), use of the coolantheater is not required. Your vehicle may also havean internal thermostat in the plug end of the cord. Thiswill prevent operation of the engine coolant heaterwhen the temperature is at or above 0°F (−18°C) asnoted on the cord.

To Use the Engine Coolant Heater1. Turn off the engine.

2. Open the hood and unwrap the electrical cord.For the 2.2L and 2.4L engines, the electricalcord is located on the passenger’s side of thevehicle between the strut and the air cleaner/filter.

3. Plug it into a normal, grounded 110-volt AC outlet.

{CAUTION:

Plugging the cord into an ungrounded outletcould cause an electrical shock. Also, thewrong kind of extension cord could overheatand cause a fire. You could be seriouslyinjured. Plug the cord into a properly groundedthree-prong 110-volt AC outlet. If the cord willnot reach, use a heavy-duty three-prongextension cord rated for at least 15 amps.

4. Before starting the engine, be sure to unplug andstore the cord as it was before to keep it awayfrom moving engine parts. If you do not, it could bedamaged.

How long should you keep the coolant heater pluggedin? The answer depends on the outside temperature,the kind of oil you have, and some other things. Insteadof trying to list everything here, we ask that youcontact a GM dealer in the area where you will beparking your vehicle. The dealer can give you the bestadvice for that particular area.

2-22

Automatic Transaxle OperationIf your vehicle is equipped with an automatic transaxle,the shift lever is located on the console betweenthe seats.

There are several differentpositions for the automatictransaxle.

PARK (P): This position locks your front wheels. It isthe best position to use when you start your enginebecause your vehicle cannot move easily.

{CAUTION:

It is dangerous to get out of your vehicle if theshift lever is not fully in PARK (P) with theparking brake firmly set. Your vehicle can roll.



Do not leave your vehicle when the engine isrunning unless you have to. If you have leftthe engine running, the vehicle can movesuddenly. You or others could be injured.To be sure your vehicle will not move, evenwhen you are on fairly level ground, always setyour parking brake and move the shift lever toPARK (P). See Shifting Into Park (P) (AutomaticTransaxle) on page 2-28. If you are pulling atrailer, see Towing a Trailer (AutomaticTransaxle) on page 4-39 or Towing a Trailer(Manual Transaxle) on page 4-46.

Ensure the shift lever is fully in PARK (P) before startingthe engine. Your vehicle has an automatic transaxle shiftlock control system. You have to fully apply your regularbrakes before you can shift from PARK (P) when theignition key is in RUN. If you cannot shift out of PARK (P),ease pressure on the shift lever — push the shift lever allthe way into PARK (P) and also release the shift leverbutton as you maintain brake application. Then move theshift lever into the gear you wish. Press the shift leverbutton before moving the shift lever. See Shifting Out ofPark (P) (Automatic Transaxle) on page 2-30.

2-23

REVERSE (R): Use this gear to back up.

Notice: Shifting to REVERSE (R) while your vehicleis moving forward could damage the transaxle.The repairs would not be covered by your warranty.Shift to REVERSE (R) only after your vehicle isstopped.

To rock your vehicle back and forth to get out of snow,ice or sand without damaging your transaxle, see IfYour Vehicle is Stuck in Sand, Mud, Ice or Snowon page 4-30.

NEUTRAL (N): In this position, your engine does notconnect with the wheels. To restart when you arealready moving, use NEUTRAL (N) only. Also, useNEUTRAL (N) when your vehicle is being towed.

{CAUTION:

Shifting into a drive gear while your engine isrunning at high speed is dangerous. Unlessyour foot is firmly on the brake pedal, yourvehicle could move very rapidly. You couldlose control and hit people or objects. Do notshift into a drive gear while your engine isrunning at high speed.

Notice: Shifting out of PARK (P) or NEUTRAL (N)while the engine is running at high speed maydamage the transaxle. The repairs would not becovered by your warranty. Be sure the engine is notrunning at high speeds when shifting your vehicle.

Notice: Shifting to a drive gear from NEUTRAL (N)while the vehicle is moving could damage thetransaxle. Make sure the vehicle is stopped beforeshifting from NEUTRAL (N) into a drive gear.

AUTOMATIC OVERDRIVE (D): This position is fornormal driving with the automatic transaxle. If you needmore power for passing, and you are:

• Going less than about 35 mph (55 km/h), push youraccelerator pedal about halfway down.

• Going about 35 mph (55 km/h), push youraccelerator all the way down.

2-24

INTERMEDIATE (I): This position is also used fornormal driving. However, it offers braking fromthe engine for slight downgrades where the vehiclewould otherwise accelerate due to steepness of grade.If repetitive shifts occur between third and fourthgears on steep uphills, this position can be used toprevent repetitive shifting. Fuel economy will be lowerthan AUTOMATIC OVERDRIVE (D). Here are sometimes you might choose INTERMEDIATE (I) instead ofAUTOMATIC OVERDRIVE (D):

• When driving on hilly, winding roads.

• When towing a trailer, so there is less shiftingbetween gears.

LOW (L): This position gives you even more powerbut lower fuel economy than INTERMEDIATE (I).You can use it on very steep hills, or in deep snow ormud. If the shift lever is put in LOW (L), the transaxle willnot shift into LOW (L) until the vehicle is going slowlyenough.

Notice: Spinning the tires or holding the vehicle inone place on a hill using only the acceleratorpedal may damage the transaxle. If you are stuck,do not spin the tires. When stopping on a hill,use the brakes, or parking brake to hold the vehiclein place.

Manual Transaxle Operation

This is your shift pattern.

Here is how to operate your manual transaxle:

FIRST (1): Press the clutch pedal and shift intoFIRST (1). Then, slowly let up on the clutch pedal asyou press the accelerator pedal.

You can shift into FIRST (1) when you are going lessthan 20 mph (32 km/h). If you have come to a completestop and it is hard to shift into FIRST (1), put the shiftlever in NEUTRAL and let up on the clutch. Pressthe clutch pedal back down. Then shift into FIRST (1).

SECOND (2): Press the clutch pedal as you let upon the accelerator pedal and shift into SECOND (2).Then, slowly let up on the clutch pedal as you press theaccelerator pedal.

2-25

THIRD (3), FOURTH (4) and FIFTH (5): Shift intoTHIRD (3), FOURTH (4) and FIFTH (5) the same wayyou do for SECOND (2). Slowly let up on the clutchpedal as you press the accelerator pedal.

To stop, let up on the accelerator pedal and press thebrake pedal. Just before the vehicle stops, pressthe clutch pedal and the brake pedal, and shift toNEUTRAL.

NEUTRAL: Use this position when you start or idleyour engine.

REVERSE (R): To back up, press down the clutchpedal and shift into REVERSE (R). Let up on the clutchpedal slowly while pressing the accelerator pedal.

Notice: Shifting to REVERSE (R) while your vehicleis moving forward could damage the transaxle.The repairs would not be covered by your warranty.Shift to REVERSE (R) only after your vehicle isstopped.

Also, use REVERSE (R), along with the parking brake,for parking your vehicle.

For vehicles with the 2.0L Supercharged engine, pressdown the clutch pedal. Then, lift up the ring on the shiftlever below the shift knob and shift into REVERSE (R).Let up on the clutch pedal slowly while pressing theaccelerator pedal.

Shift Speeds

{CAUTION:

If you skip a gear when you downshift, youcould lose control of your vehicle. You couldinjure yourself or others. Do not shift downmore than one gear at a time when youdownshift.

Up-Shift LightIf you have a manualtransaxle, you may havean up-shift light. Thislight will show you when toshift to the next highergear for the best fueleconomy.

When this light comes on, you can shift to the nexthigher gear if weather, road, and traffic conditions letyou. For the best fuel economy, accelerate slowlyand shift when the light comes on.While you accelerate, it is normal for the light to go onand off if you quickly change the position of theaccelerator. Ignore the light when you downshift.

United States Only

2-26

Parking Brake

The parking brake lever is located between thefront seats.

For vehicles equipped with an armrest, lift the consolearmrest in order to access the parking brake lever.

Manual Transaxle Parking Brake Lever

Automatic Transaxle Parking Brake Lever

2-27

To set the parking brake, hold the brake pedal downand pull up on the parking brake lever. If the ignition ison, the brake system warning light will come on.See Brake System Warning Light on page 3-29.

To release the parking brake, hold the brake pedaldown. Pull the parking brake lever up until you can pressthe release button. Hold the release button in as youmove the brake lever all the way down.

If you forget to release your parking brake, a chime willsound and a warning light will flash when the parkingbrake is applied and the vehicle is moving fasterthan 5 mph (8 km/h). See DIC Warnings and Messageson page 3-40.

Notice: Driving with the parking brake on canoverheat the brake system and cause prematurewear or damage to brake system parts. Verify thatthe parking brake is fully released and the brakewarning light is off before driving.

Shifting Into Park (P) (AutomaticTransaxle)

{CAUTION:

It can be dangerous to get out of your vehicle ifthe shift lever is not fully in PARK (P) with theparking brake firmly set. Your vehicle can roll.If you have left the engine running, the vehiclecan move suddenly. You or others could beinjured. To be sure your vehicle will not move,even when you are on fairly level ground, usethe steps that follow. If you are pulling a trailer,see Towing a Trailer (Automatic Transaxle) onpage 4-39 or Towing a Trailer (ManualTransaxle) on page 4-46.

1. Hold the brake pedal down and set the parkingbrake.

2. Move the shift lever into PARK (P) by holding thebutton on the shift lever and pushing the lever allthe way toward the front of the vehicle.

3. Turn the ignition key to LOCK.4. Remove the key and take it with you. If you can

leave your vehicle with the ignition key in yourhand, your vehicle is in PARK (P).

2-28

Leaving Your Vehicle With the EngineRunning

{CAUTION:

It can be dangerous to leave your vehicle withthe engine running. Your vehicle could movesuddenly if the shift lever is not fully inPARK (P) with the parking brake firmly set.And, if you leave the vehicle with the enginerunning, it could overheat and even catch fire.You or others could be injured. Do not leaveyour vehicle with the engine running.

If you have to leave your vehicle with the enginerunning, be sure your vehicle is in PARK (P) and yourparking brake is firmly set before you leave it. After youhave moved the shift lever into PARK (P), hold theregular brake pedal down. Then, see if you can movethe shift lever away from PARK (P) without first pushingthe button. If you can, it means that the shift leverwas not fully locked into PARK (P).

Torque LockIf you are parking on a hill and you do not shift yourtransaxle into PARK (P) properly, the weight of thevehicle may put too much force on the parking pawl inthe transaxle. You may find it difficult to pull the shiftlever out of PARK (P). This is called “torque lock.”To prevent torque lock, set the parking brake and thenshift into PARK (P) properly before you leave thedriver’s seat. To find out how, see Shifting Into Park (P)(Automatic Transaxle) on page 2-28.

When you are ready to drive, move the shift lever out ofPARK (P) before you release the parking brake.

If torque lock does occur, you may need to have anothervehicle push yours a little uphill to take some of thepressure from the parking pawl in the transaxle,then you will be able to pull the shift lever out ofPARK (P).

2-29

Shifting Out of Park (P) (AutomaticTransaxle)This vehicle is equipped with an electronic shift lockrelease system. The shift lock release is designed to:

• Prevent ignition key removal unless the shiftlever is in PARK (P) with the shift lever button fullyreleased, and

• Prevent movement of the shift lever out of PARK (P)unless the ignition is in a position other than LOCK.

The shift lock release is always functional except inthe case of a an uncharged or low voltage (less than9 volt) battery.

If your vehicle has an uncharged battery or a batterywith low voltage, try charging or jump starting thebattery. See Jump Starting on page 5-40 for moreinformation.

To shift out of PARK (P) use the following sequence:

1. Apply the brake pedal.

2. Then press the shift lever button.

3. Move the shift lever to the desired position.

If you still are unable to shift out of PARK (P):

1. Fully release the shift lever button.

2. While holding down the brake pedal, press the shiftlever button again.

3. Move the shift lever to the desired position.

If you still cannot move the shift lever from PARK (P),consult your dealer or a professional towing service.

Parking Your Vehicle (ManualTransaxle)Before leaving your vehicle, fully press the clutch pedalin, move the shift lever into REVERSE (R), and firmlyapply the parking brake. Once the shift lever hasbeen placed in REVERSE (R) with the clutch pedalpressed in, you can turn the ignition key to LOCK,remove the key and release the clutch. See ManualTransaxle Operation on page 2-25.

2-30

Parking Over Things That Burn

{CAUTION:

Things that can burn could touch hot exhaustparts under your vehicle and ignite. Do notpark over papers, leaves, dry grass, or otherthings that can burn.

Engine Exhaust

{CAUTION:

Engine exhaust can kill. It contains the gascarbon monoxide (CO), which you cannot see orsmell. It can cause unconsciousness and death.

You might have exhaust coming in if:• Your exhaust system sounds strange or

different.• Your vehicle gets rusty underneath.• Your vehicle was damaged in a collision.• Your vehicle was damaged when driving

over high points on the road or over roaddebris.

• Repairs were not done correctly.• Your vehicle or exhaust system had been

modified improperly.

If you ever suspect exhaust is coming into yourvehicle:

• Drive it only with all the windows down toblow out any CO; and

• Have your vehicle fixed immediately.

2-31

Running the Engine While ParkedIt is better not to park with the engine running. But if youever have to, here are some things to know.

{CAUTION:

Idling the engine with the climate controlsystem off could allow dangerous exhaust intoyour vehicle. See the earlier caution underEngine Exhaust on page 2-31.

Also, idling in a closed-in place can let deadlycarbon monoxide (CO) into your vehicle even ifthe climate control fan is at the highest setting.One place this can happen is a garage.Exhaust — with CO — can come in easily.NEVER park in a garage with the enginerunning.

Another closed-in place can be a blizzard.See Winter Driving on page 4-26.

{CAUTION:

It can be dangerous to get out of your vehicleif the shift lever is not fully in PARK (P) withthe parking brake firmly set. Your vehicle canroll. Do not leave your vehicle when the engineis running unless you have to. If you have leftthe engine running, the vehicle can movesuddenly. You or others could be injured.To be sure your vehicle will not move, evenwhen you are on fairly level ground, always setyour parking brake and move the shift lever toPARK (P).

Follow the proper steps to be sure your vehicle will notmove. See Shifting Into Park (P) (Automatic Transaxle)on page 2-28.

If you are parking on a hill and if you are pulling atrailer, also see Towing a Trailer (Automatic Transaxle)on page 4-39 or Towing a Trailer (Manual Transaxle)on page 4-46.

2-32

Mirrors

Manual Rearview MirrorTo reduce glare from lamps behind you, move the levertoward you to the night position.

Automatic Dimming Rearview Mirrorwith OnStar ®

If the vehicle has this feature, an automatic dimmingmirror automatically dims to the proper level to minimizeglare at night from lights behind your vehicle. Formore information about OnStar®, see OnStar® Systemon page 2-35.

P (On/Off): This is the on/off button.

Automatic Dimming Mirror OperationThe automatic dimming mirror function is turned on eachtime the ignition is started. A light near the on/off buttonwill come on to indicate the automatic dimming is on.

Press the on/off button for about four seconds tomanually turn the automatic dimming function on or off.

Cleaning the MirrorWhen cleaning the mirror, use a paper towel or similarmaterial dampened with glass cleaner. Do not sprayglass cleaner directly on the mirror as that may causethe liquid cleaner to enter the mirror housing.

Outside Manual MirrorAdjust your outside mirror so you can just see the sideof your vehicle and have a clear view of objects behindyou. The mirror can be folded in to enter narrow areas.

Outside Remote Control MirrorAdjust the driver’s outside mirror with the control leverlocated on the driver’s door. Adjust the outside mirrorsso that the side of the vehicle can be seen whilesitting in a comfortable driving position.

To adjust the passenger’s outside mirror, sit in thedriver’s seat and have a passenger adjust the mirror foryou. The mirror is a manual fold design.

2-33

Outside Power Mirrors

The controls for theoutside power mirrors, arelocated on the driver’sdoor armrest.

Move the selector switch located below the four-waycontrol pad to the left or right to choose either thedriver’s side or passenger’s side mirror. To adjust amirror, use the arrows located on the four-way controlpad to move the mirror in the desired direction.Adjust each outside mirror so that a little of the vehicleand the area behind it can be seen while sitting in acomfortable driving position. Keep the selector switchin the center position when not adjusting eitheroutside mirror.

Both mirrors can manually be folded by pulling themtoward the vehicle. This feature may be useful whengoing through a car wash or a confined space. Push themirrors away from the vehicle, to the normal position,before driving.

Outside Convex Mirror

{CAUTION:

A convex mirror can make things (like othervehicles) look farther away than they really are.If you cut too sharply into the right lane, youcould hit a vehicle on your right. Check yourinside mirror or glance over your shoulderbefore changing lanes.

The passenger’s side mirror is convex. A convexmirror’s surface is curved so more can be seen from thedriver’s seat. It also makes things appear fartheraway than they really are.

2-34

OnStar ® System

OnStar® uses global positioning system (GPS) satellitetechnology, wireless communications, and liveadvisors to provide you with a wide range of safety,security, information, and convenience services. If yourairbags deploy, the system is designed to make anautomatic call to OnStar® Emergency where wecan request emergency services be sent to yourlocation. If you lock your keys in the car, call OnStar® at1-888-4-ONSTAR and they can send a signal tounlock your doors. if you need roadside assistance,press the OnStar® button and they will get you the helpyou need.

A complete OnStar® User’s Guide and the Terms andConditions of the OnStar® Subscription ServiceAgreement are included in the vehicle’s glove boxliterature. For more information, visit www.onstar.com orwww.onstar.ca. Contact OnStar® at 1-888-4-ONSTAR(1-888-466-7827), or press the OnStar® button to speakto an OnStar® advisor 24 hours a day, 7 days a week.

Terms and conditions of the Subscription ServiceAgreement can be found at www.onstar.com orwww.onstar.ca.

OnStar ® ServicesFor new vehicles equipped with OnStar®, the Safe andSound Plan is included for one year from the date ofpurchase. You can extend this plan beyond thefirst year, or upgrade to the Directions and Connections®

Plan to meet your needs. For more information, pressthe OnStar® button to speak to an advisor.

2-35

Safe and Sound Plan• Advanced Automatic Collision Notification

(If Equipped)

• Automatic Notification of Airbag Deployment

• Emergency Services

• Roadside Assistance

• Stolen Vehicle Tracking

• AccidentAssist

• Remote Door Unlock/Vehicle Alert

• Remote Diagnostics

• Online Concierge

Directions and Connections ® Plan• All Safe and Sound Plan Services

• Driving Directions

• RideAssist

• Information and Convenience Services

OnStar ® Personal CallingAs an OnStar® subscriber, the Personal Callingcapability allows you to make hands-free calls using awireless system that is integrated into the vehicle.Calls can be placed nationwide using simple voicecommands with no additional contracts and no additionalroaming charges. To find out more about OnStar®

Personal Calling, refer to the OnStar® User’s Guide inthe vehicle’s glove box, visit www.onstar.com orwww.onstar.ca, or speak to an OnStar® advisor bypressing the OnStar® button or calling 1-888-4-ONSTAR(1-888-466-7827).

OnStar ® Virtual AdvisorYour vehicle may have Virtual Advisor. It is a feature ofOnStar® Personal Calling that uses your minutes toaccess weather, local traffic reports, and stock quotes.By pressing the phone button and giving a few simplevoice commands, you can browse through thevarious topics. Customize your information profile atwww.myonstar.com. See the OnStar® user’s guide formore information.

2-36

Storage Areas

Glove BoxOpen the glove box by lifting up on the lever. Close theglove box with a firm push.

Cupholder(s)There are two cupholders located at the front of thecenter console, in front of the shift lever. There are alsocupholders for the rear seat passengers located atthe rear of the center console.

Center Console Storage AreaYour vehicle may have a center console armrest withstorage area. Use the lever on the front of the consoleto open it.

Driver’s Storage CompartmentThe driver’s storage compartment is located near theleft side of the steering column on the bottom of theinstrument panel. It can be used to store small items andcontains the remote trunk release switch. For moreinformation, see Remote Trunk Release under Trunk onpage 2-10.

Convenience NetYour vehicle may have a convenience net. You will seeit inside the back wall of the trunk. Put small loadsbehind the net. It can help keep them from falling overduring sharp turns or quick starts and stops.

Unclip a corner of the convenience net to fit largerobjects behind the net, then reclip it to secure them inplace. The net is not for larger, heavier loads. Storethem in the trunk as far forward as you can.

You can unhook the net so that it will lie flat when youare not using it.

2-37

SunroofYour vehicle may beequipped with a powersunroof. The switchthat operates it is locatedon the headliner.

To open or close the sunroof, the ignition must be on,or turned to ACC, or Retained Accessory Power (RAP)must be active. See Retained Accessory Power (RAP)on page 2-20.

Press and hold the switch rearward to open the glasspanel to the vent position. Press and hold the switchrearward a second time to open the sunroof. If thesunshade is closed, it will open automatically with thesunroof.

To close the sunroof, press the switch forward and holdit until the sunroof is closed. The sunroof will stop ifthe switch is released. The sunshade must be closedmanually.

The sunroof glass panel cannot be opened or closedif the vehicle has an electrical failure.

Notice: If you force the sunshade forward of thesliding glass panel, damage will occur and thesunroof may not open or close properly. Alwaysclose the glass panel before closing the sunshade.

2-38

Instrument Panel Overview ...............................3-4Hazard Warning Flashers ................................3-6Other Warning Devices ...................................3-6Horn .............................................................3-6Tilt Wheel .....................................................3-6Turn Signal/Multifunction Lever .........................3-7Turn and Lane-Change Signals ........................3-8Headlamp High/Low-Beam Changer ..................3-8Flash-to-Pass .................................................3-8Windshield Wipers ..........................................3-9Windshield Washer .......................................3-10Cruise Control ..............................................3-10Headlamps ..................................................3-13Wiper Activated Headlamps ............................3-14Headlamps on Reminder ................................3-14Daytime Running Lamps (DRL) .......................3-14Fog Lamps ..................................................3-15Instrument Panel Brightness ...........................3-15Dome Lamp .................................................3-15Entry/Exit Lighting .........................................3-16Mirror Reading Lamps ...................................3-16Battery Run-Down Protection ..........................3-16Accessory Power Outlet(s) .............................3-16Ashtray(s) and Cigarette Lighter ......................3-17

Climate Controls ............................................3-17Climate Control System .................................3-17Outlet Adjustment .........................................3-20Passenger Compartment Air Filter ...................3-20

Warning Lights, Gages, and Indicators ............3-22Instrument Panel Cluster ................................3-23Speedometer and Odometer ...........................3-24Tachometer .................................................3-24Safety Belt Reminder Light .............................3-24Passenger Safety Belt Reminder Light .............3-25Airbag Readiness Light ..................................3-25Passenger Airbag Status Indicator ...................3-26Charging System Light ..................................3-28Up-Shift Light ...............................................3-29Brake System Warning Light ..........................3-29Anti-Lock Brake System Warning Light .............3-30Enhanced Traction System Warning Light .........3-31Engine Coolant Temperature Warning Light ......3-32Malfunction Indicator Lamp .............................3-32Oil Pressure Light .........................................3-35Security Light ...............................................3-36Fog Lamp Light ............................................3-36Highbeam On Light .......................................3-36Fuel Gage ...................................................3-36Boost Gage .................................................3-37

Section 3 Instrument Panel

3-1

Driver Information Center (DIC) .......................3-38DIC Operation and Displays ...........................3-38DIC Warnings and Messages .........................3-40DIC Vehicle Personalization ............................3-42

Audio System(s) .............................................3-48Setting the Time for Radios without Radio

Data Systems (RDS) ..................................3-49Setting the Time for Radios with Radio Data

Systems (RDS) .........................................3-49Radio with CD (Base Level) ...........................3-50

Radio with CD (Uplevel) ................................3-55Radio with CD (MP3) ....................................3-64Theft-Deterrent Feature ..................................3-79Audio Steering Wheel Controls .......................3-79Radio Reception ...........................................3-80Care of Your CDs .........................................3-81Care of the CD Player ...................................3-81Fixed Mast Antenna ......................................3-81XM™ Satellite Radio Antenna System .............3-81

Section 3 Instrument Panel

3-2

✍ NOTES

3-3

Instrument Panel Overview

3-4

The main components of your instrument panel are the following:

A. Side Window Outlets. See Climate Control Systemon page 3-17.

B. Air Outlets. See Outlet Adjustment on page 3-20.C. Turn Signal/Multifunction Lever. See Turn

Signal/Multifunction Lever on page 3-7.D. Cruise Control Buttons (If Equipped). See Cruise

Control on page 3-10.E. Audio Steering Wheel Controls (If Equipped). See

Audio Steering Wheel Controls on page 3-79.F. Instrument Panel Cluster. See Instrument Panel

Cluster on page 3-23.G. Hazard Warning Flashers Button. See Hazard

Warning Flashers on page 3-6.H. Windshield Wiper/Washer Controls. See Windshield

Wipers on page 3-9 and Windshield Washer onpage 3-10.

I. Audio System. See Audio System(s) on page 3-48.J. Fog Lamp Button (If Equipped). See Fog Lamps

on page 3-15.K. Trunk Release. See Trunk on page 2-10.

L. Instrument Panel Brightness Control. See InstrumentPanel Brightness on page 3-15.

M. Horn. See Horn on page 3-6.N. Driver Information Control Button. See Driver

Information Center (DIC) on page 3-38.O. Cigarette Lighter (If Equipped). Accessory Power

Outlet (If Equipped). See Ashtray(s) and CigaretteLighter on page 3-17 and Accessory Power Outlet(s)on page 3-16.

P. Shift Lever (Manual Shown). See Manual TransaxleOperation on page 2-25 and Automatic TransaxleOperation on page 2-23.

Q. Climate Controls. See Climate Control System onpage 3-17.

R. Passenger Air Bag Status Indicator and HeatedSeats Button (If Equipped). See Passenger AirbagStatus Indicator on page 3-26 and Heated Seatson page 1-4.

S. Glove Box. See Glove Box on page 2-37.

3-5

Hazard Warning FlashersYour hazard warning flashers let you warn others. Theyalso let police know you have a problem. Your frontand rear turn signal lamps will flash on and off.

The hazard warningflasher button is located inthe center of theinstrument panel.

Your hazard warning flashers work no matter whatposition your key is in, and even if the key is not in.

Press the button to make the front and rear turn signallamps flash on and off. Press the button again toturn the flashers off.

When the hazard warning flashers are on, your turnsignals will not work.

Other Warning DevicesIf you carry reflective triangles, you can set them up atthe side of the road about 300 feet (100 m) behindyour vehicle.

HornTo sound the horn, press the center pad on thesteering wheel.

Tilt WheelA tilt wheel allows you to adjust the steering wheelbefore you drive. You can raise the steering wheel tothe highest level to give your legs more room when youenter and exit the vehicle.

3-6

The lever that allows you to tilt the steering wheel islocated on the left side of the steering column.

To tilt the wheel, pull down the lever. Then move thewheel to a comfortable position, pull up the lever to lockthe wheel in place.

Turn Signal/Multifunction Lever

The lever on the left side of the steering columnincludes the following:

• G Turn and Lane-Change Signals. See Turn andLane-Change Signals on page 3-8.

• 23 Headlamp High/Low-Beam Changer. SeeHeadlamp High/Low-Beam Changer on page 3-8.

• Flash-to-Pass. See Flash-to-Pass on page 3-8.

• O Exterior Lamp Control. See Headlampson page 3-13.

3-7

Turn and Lane-Change SignalsThe turn signal has two upward (for right) andtwo downward (for left) positions. These positions allowyou to signal a turn or a lane change.

To signal a turn, move the lever all the way up or down.When the turn is finished, the lever will returnautomatically.

An arrow on the instrumentpanel cluster will flash inthe direction of theturn or lane change.

To signal a lane change, just raise or lower the leveruntil the arrow starts to flash. Hold it there until youcomplete your lane change. The lever will return by itselfwhen you release it.

As you signal a turn or a lane change, if the arrowsflash rapidly, a signal bulb may be burned out and otherdrivers will not see your turn signal. If a bulb is burnedout, replace it to help avoid an accident.

If the arrows do not go on at all when you signal a turn,check the fuse. See Fuses and Circuit Breakers onpage 5-93.

Headlamp High/Low-Beam ChangerTo change the headlamps from low beam to highbeam, push the turn signal lever away from you.

When the high beams areon, this light on theinstrument panel clusterwill also be on.

To change the headlamps from high beam to low beam,pull the turn signal lever toward you.

Flash-to-PassThis feature lets you use your high-beam headlamps tosignal a driver in front of you that you want to pass.

To use it, pull the turn signal/multifunction lever towardyou until the high-beam headlamps come on, thenrelease the lever to turn them off.

3-8

Windshield Wipers

Use this lever, located on the right side of the steeringwheel, to operate the windshield wipers.

9(Off): Move the lever to this position to turn off thewindshield wipers.

& (Intermittent): Move the lever to this position tochoose a delayed wiping cycle. Rotate the intermittentadjustment band to set for shorter or longer delaycycles. To the left of the adjustment band are bars,increasing in size from top to bottom. Smaller bars meanthe wiper movement is less frequent and larger barsmean the wiper movement is more frequent.During intermittent wiping mode, the cycle delay time isalso affected by vehicle speed. As your vehicle speedincreases, your delay cycle time will automaticallydecrease.

x (Delay): When the lever is in the intermittentposition, turn the intermittent adjust band with thissymbol on it up or down to set for a shorter or longerdelay between wipes. To the left of the adjust band arebars, increasing in size from bottom to top, thatindicate the frequency of the wipes. Smaller bars meanthe wipers movement is less frequent. Larger barsmean the movement is more frequent.

6 (Low Speed): Move the lever up to the firstsetting past intermittent, for steady wiping at low speed.

1 (High Speed): Move the lever up to the secondsetting past intermittent, for wiping at high speed.

8 (Mist): Move the lever all the way down to thisposition for a single wiping cycle. Hold it there until thewindshield wipers start; then let go. The windshieldwipers will stop after one wiping cycle. If you wantadditional wiping cycles, hold the lever down longer.

Damaged wiper blades may prevent you from seeingwell enough to drive safely. To avoid damage, be sure toclear ice and snow from the wiper blades beforeusing them.

If the wiper blades are frozen to the windshield, carefullyloosen or thaw them. If your blades do becomedamaged, get new blades or blade inserts.

3-9

Heavy snow or ice can overload your wiper motor.A circuit breaker will stop the motor until it cools. Clearaway snow or ice to prevent an overload. If the motorgets stuck, turn the wipers off, clear away the snowor ice, and then turn the wipers back on.

As an added safety feature, if the wipers are on formore than 15 seconds, the vehicle’s headlamps will turnon automatically. They will turn off 15 seconds afterthe wipers are turned off.

Windshield WasherTo wash your windshield, press the button at the end ofthe lever until the washers begin.

{CAUTION:

In freezing weather, do not use your washeruntil the windshield is warmed. Otherwise thewasher fluid can form ice on the windshield,blocking your vision.

When you release the button, the washers will stop, butthe wipers will continue to wipe for about three timesor will resume the speed you were using before.

Cruise ControlWith cruise control, you can maintain a speed of about25 mph (40 km/h) or more without keeping your footon the accelerator. This can really help on longtrips. Cruise control does not work at speeds below25 mph (40 km/h).

{CAUTION:

Cruise control can be dangerous where youcannot drive safely at a steady speed. So, donot use your cruise control on winding roadsor in heavy traffic.

Cruise control can be dangerous on slipperyroads. On such roads, fast changes in tiretraction can cause needless wheel spinning,and you could lose control. Do not use cruisecontrol on slippery roads.

3-10

Setting Cruise Control

{CAUTION:

If you leave your cruise control on when youare not using cruise, you might hit a buttonand go into cruise when you do not want to.You could be startled and even lose control.Keep the cruise control switch off until youwant to use cruise control.

The cruise control buttons are located on thesteering wheel.

J (On/Off): Press this button to turn the cruisecontrol system on and off.

+RES (Resume): Press this part of the button toresume a set speed and to accelerate the speed.

−SET (Set): Press this part of the button to set a speedand to decrease the speed.

To set a speed do the following:

1. Press the on/off button to turn cruise control on.The indicator light on the button will come on.

2. Get to the speed you want.

3. Press the −SET part of the control button andrelease it. The CRUISE ENGAGED messagewill appear on the Driver Information Center (DIC)to show the system is engaged.

4. Take your foot off the accelerator pedal.

If the vehicle is in cruise control and the TractionControl System (TCS) begins to limit wheel spin, thecruise control will automatically disengage. SeeEnhanced Traction System (ETS) on page 4-9. Whenroad conditions allow, the cruise control can beused again.

3-11

Resuming a Set SpeedSuppose you set your cruise control at a desired speedand then you apply the brake. This, of course,disengages the cruise control. To return to yourpreviously set speed, you do not need to go throughthe set process again. Once you’re going about25 mph (40 km/h) or more, you can press the +RESpart of the button briefly.

This will take you back up to your previously chosenspeed and stay there.

Increasing Speed While UsingCruise ControlThere are two ways to go to a higher speed.

1. Disengage the cruise control by applying the brakepedal but do not turn it off. Accelerate to a higherspeed and reset the cruise control.

2. If the cruise control system is already engaged,press the +RES part of the button. Hold it there untilyou get up to the speed you want, and then releasethe button. To increase your speed in very smallamounts, press the +RES part of the button brieflyand then release it. Each time you do this, yourvehicle will go about 1 mph (1.6 km/h) faster.

Reducing Speed While UsingCruise ControlIf the cruise control system is already engaged,

• Push and hold the −SET part of the button until youreach the lower speed you want, then release it.

• To slow down in very small amounts, push the−SET part of the button briefly. Each time youdo this, you’ll go about 1 mph (1.6 km/h) slower.

Passing Another Vehicle While UsingCruise ControlUse the accelerator pedal to increase your speed.When you take your foot off the pedal, your vehicle willslow down to the cruise control speed you set earlier.

Using Cruise Control on HillsHow well your cruise control will work on hills dependsupon your speed, load and the steepness of thehills. When going up steep hills, you may have to stepon the accelerator pedal to maintain your speed.When going downhill, you may have to brake or shift toa lower gear to keep your speed down. Of course,applying the brake takes you out of cruise control. Manydrivers find this to be too much trouble and don’t usecruise control on steep hills.

3-12

Ending Cruise ControlTo end cruise control, step lightly on the brake pedal orthe clutch if your vehicle has a manual transmission.

Stepping on the brake pedal or clutch will only end thecurrent cruise control session. Press the cruisecontrol on/off button to turn the system completely off.

Erasing Speed MemoryWhen you turn off the cruise control or the ignition, yourcruise control set speed memory is erased.

Headlamps

The lever on the left side of the steering columnoperates the exterior lamps.

The exterior lamp switch has the following four positions:

2 (Headlamps): This position turns on theheadlamps, parking lamps, and taillamps.

; (Parking Lamps): This position turns on theparking lamps and taillamps only.

AUTO (Automatic Headlamp System): This positionautomatically turns on the Daytime Running Lampsduring daytime, and the headlamps, parking lamps, andtaillamps at night. This position must be selected inorder for the Wiper Activated Headlamps to be activated.See Wiper Activated Headlamps on page 3-14.

P (Off/On): This position is the momentary Off/Onswitch for the Automatic Headlamp System. In Canada,this only works when a vehicle with an automatictransaxle is in PARK (P).

When operating in AUTO, a momentary turn of theswitch to off/on will turn off the Automatic HeadlampSystem. Rotating the switch to off/on again will turn theAutomatic Headlamp System back on. The AutomaticHeadlamp System is always turned on at the beginningof an ignition cycle.

3-13

Wiper Activated HeadlampsThis feature activates the headlamps and parking lampsafter the windshield wipers are turned on. For thisfeature to work, automatic lighting must be enabled. SeeHeadlamps on page 3-13 for additional information.

When the ignition is turned off, the wiper-activatedheadlamps will immediately turn off. They will also turnoff 15 seconds after the windshield wiper control isturned off.

Headlamps on ReminderIf you open the driver’s door with the ignition off and thelamps on, you will hear a warning chime.

Daytime Running Lamps (DRL)Daytime Running Lamps (DRL) can make it easier forothers to see the front of your vehicle during theday. DRL can be helpful in many different drivingconditions, but they can be especially helpful in the shortperiods after dawn and before sunset. Fully functionaldaytime running lamps are required on all vehiclesfirst sold in Canada. The vehicle has a light sensor ontop of the instrument panel. Make sure it is not covered,or the head lamps will be on when not needed.

The DRL system will make your front turn signal lampscome on when the following conditions are met:

• The ignition is on.

• The exterior lamps control is in AUTO or theparking lamps only position.

• The light sensor detects daytime light.

• The parking brake is released.

When the DRL system is on, the taillamps, sidemarkerlamps, parking lamps, and instrument panel lightswill not be illuminated unless you have turned theexterior lamps control to the parking lamp position.

As with any vehicle, you should turn on the regularheadlamp system when you need it.

3-14

Fog Lamps

The fog lamp button islocated on the instrumentpanel, to the left of thesteering wheel.

The ignition must be on to turn your fog lamps on.

Push the button to turn the fog lamps on. An indicatorlight on the cluster will come on when the fog lampsare on. Push the button again to turn the fog lamps off.

The parking lamps will automatically turn on and offwhen the fog lamps are turned on and off.

The fog lamps will turn off while the high-beamheadlamps are turned on.

Some localities have laws that require the headlamps tobe on along with the fog lamps.

Instrument Panel Brightness

The control for this featureis located on theinstrument panel to the leftof the steering wheel.

Turn the knob clockwise to brighten the lights orcounterclockwise to dim them.

Dome LampYour vehicle may have a dome lamp.

9(Off): Move the lever to this position to turn thelamp off, even when a door is opened.

1 (Door): Move the lever to this position to turn thelamp on whenever a door is opened.

+ (On): Move the lever to this position to turn thedome lamp on.

3-15

Entry/Exit LightingThe lamps inside your vehicle will go on when you openany door. These lamps will fade out after about20 seconds after all of the doors have been closed orwhen the ignition is turned on. These lamps will also goon when you press the trunk release, unlock symbolbutton or the horn symbol on the keyless entry systemtransmitter.

The lamps inside your vehicle will stay on for about20 seconds after your key is removed from the ignitionto provide an illuminated exit.

Mirror Reading LampsYour vehicle may have reading lamps on the rearviewmirror. Push the button to turn the reading lamps onand off.

Battery Run-Down ProtectionYour vehicle is equipped with a battery saver featuredesigned to protect your vehicle’s battery.

When any interior lamp is left on and the ignition isturned off, the battery rundown protection system willautomatically turn the lamp off after 20 minutes. This willavoid draining the battery.

Accessory Power Outlet(s)Accessory power outlets can be used to connectelectrical equipment such as a cellular phone or CBradio. The outlet can accept electrical equipment ratedat a maximum of 20 amps.

The accessory power outlet is located in the centerconsole, rearward of the shift lever.

To use the outlet, remove the cover. When not in use,always cover the outlet with the protective cap.

Notice: Leaving electrical equipment on forextended periods will drain the battery. Always turnoff electrical equipment when not in use and donot plug in equipment that exceeds the maximumamperage rating.

Certain electrical accessories may not be compatiblewith the accessory power outlet and could resultin blown vehicle or adapter fuses. If you experience aproblem, see your dealer for additional informationon the accessory power outlet.

Notice: Adding any electrical equipment to yourvehicle may damage it or keep other componentsfrom working as they should. The repairs would notbe covered by your warranty. Do not use equipmentexceeding maximum amperage rating. Checkwith your dealer before adding electrical equipment.

3-16

When adding electrical equipment, be sure to follow theinstallation instructions included with the equipment.

Notice: Improper use of the power outlet can causedamage not covered by your warranty. Do nothang any type of accessory or accessory bracketfrom the plug because the power outlets aredesigned for accessory power plugs only.

Ashtray(s) and Cigarette LighterYour vehicle may have an ashtray and cigarette lighter.To use the lighter, located on the instrument panelbelow the climate controls, push it in all the way and letgo. When it is ready, it will pop back out by itself.

Notice: Holding a cigarette lighter in while it isheating will not allow the lighter to back away fromthe heating element when it is hot. Damage fromoverheating may occur to the lighter or heatingelement, or a fuse could be blown. Do not hold acigarette lighter in while it is heating.

To clean the center console ashtray, remove the entireashtray and empty it.

Notice: If you put papers, pins, or other flammableitems in the ashtray, hot cigarettes or othersmoking materials could ignite them and possiblydamage your vehicle. Never put flammable items inthe ashtray.

Climate Controls

Climate Control SystemWith this system you can control the heating, cooling,and ventilation for your vehicle.

Vehicles with Air Conditioning shown,without Air Conditioning similar

3-17

OperationTo change the current mode, select one of the following:

H (Vent): This mode directs air to the instrumentpanel outlets.

) (Bi-Level): This mode directs approximately half ofthe air to the instrument panel outlets, and thendirects the remaining air to the floor outlets. Cooler air isdirected to the upper outlets and warmer air to thefloor outlets.

6 (Floor): This mode directs most of the air to thefloor outlets with some air directed to the windshield andside windows.

The left knob can also be used to select defog ordefrost mode. Information on defogging and defrostingcan be found later in this section.

Recirculation is not available in this mode.

9(Fan): Turn the center knob clockwise orcounterclockwise to increase or decrease the fan speed.In any setting other than off, the fan will run continuouslywith the ignition on. The fan must be turned on to runthe air conditioning compressor.

9 (Off): To turn the fan off, turn the knob all the waycounterclockwise to the off position.

Temperature Control: Turn the right knob clockwise orcounterclockwise to increase or decrease thetemperature inside your vehicle.

h (Recirculate): Press this button to prevent outsideair and odors from entering your vehicle or to help heat orcool the air inside your vehicle more quickly. An indicatorlight above the button will come on in this mode. The airconditioning compressor also comes on. This mode is notavailable for floor, defog and defrost modes. When therecirculation button is pressed, the recirculate indicatorlight will flash five times and outside air will be delivered.Operation in this mode during periods of high humidityand cool outside temperatures may result in increasedwindow fogging. If window fogging is experienced, selectthe defrost mode.

Outside Air: This mode allows outside air to circulatethrough your vehicle. This mode is automaticallyactive if recirculate is not selected. There is no buttonfor outside air.

#(Air Conditioning): If your vehicle has airconditioning, press this button to turn the air conditioningsystem on or off. When this button is pressed, anindicator light above the button will come on to let youknow the air conditioning is activated.

3-18

On hot days, open the windows to let hot inside airescape; then close them. This helps to reduce the timeit takes for your vehicle to cool down. It also helpsthe system to operate more efficiently.

For quick cool down on hot days:

1. Select the vent mode.

2. Select the recirculation mode.

3. Select air conditioning.

4. Select the coolest temperature.

5. Select the highest fan speed.

Using these settings together for long periods of timemay cause the air inside of your vehicle to become toodry. To prevent this from happening, after the air inyour vehicle has cooled, turn off the recirculationby pressing the button again.

The air conditioning system removes moisture from theair, so you may sometimes notice a small amount ofwater dripping underneath your vehicle while idlingor after turning off the engine. This is normal.

The air conditioning compressor cannot be turned onwhen the fan is off.

Defogging and DefrostingFog on the inside of windows is a result of high humidity(moisture) condensing on the cool window glass. Thiscan be minimized if the climate control system is usedproperly. There are two modes to clear fog or frost fromyour windshield and side windows. Use the defog modeto clear the windows of fog or moisture and warm thepassengers. Use the defrost mode to remove fog or frostfrom the windshield more quickly. For best results, clearall snow and ice from the windshield before defrosting.

Turn the left knob to select the defog or defrost mode.

-(Defog): This mode directs approximately half of theair to the windshield and the side window outlets andhalf to the floor outlets. When you select this mode thesystem runs the air conditioning compressor. Todefog the windows faster, turn the temperature controlknob clockwise to the warmest setting.

Recirculation mode is not available in defog mode.

0(Defrost): This mode directs most of the air to thewindshield, with some air directed to the side windowoutlets and the floor outlets. When you select this modethe system runs the air conditioning compressor. Todefrost the windows faster, turn the temperature controlknob clockwise to the warmest setting.

Recirculation mode is not available in defrost mode.

3-19

Rear Window DefoggerThe rear window defogger uses a warming grid toremove fog from the rear window.

The rear window defogger will only work when theignition is in RUN.

< (Rear): Press the button to turn the rear windowdefogger on or off. Be sure to clear as much snow fromthe rear window as possible. An indicator light abovethe button will come on to let you know that therear window defogger is activated.

The rear window defogger will turn off approximately15 minutes after the button is pressed. If turned onagain, the defogger will only run for approximatelyseven minutes before turning off. If the vehicle is movingfaster than 50 mph (80 kph), the rear defogger willstay on. The defogger can also be turned off by pressingthe button again or by turning off the engine.

Notice: Do not use anything sharp on the inside ofthe rear window. If you do, you could cut ordamage the warming grid, and the repairs would notbe covered by your warranty. Do not attach atemporary vehicle license, tape, a decal or anythingsimilar to the defogger grid.

Outlet AdjustmentUse the thumbwheels located next to and below the airoutlets to change the direction of the airflow and toopen and close the outlets.

Operation Tips• Clear away any ice, snow or leaves from the air

inlets at the base of the windshield that mayblock the flow of air into your vehicle.

• Use of non-GM approved hood deflectors mayadversely affect the performance of the system.

• Keep the path under the front seats clear of objectsto help circulate the air inside of your vehicle moreeffectively.

Passenger Compartment Air FilterPassenger compartment air, both outside air andrecirculated air, is routed through a passengercompartment filter. The filter removes certain particlesfrom the air, including pollen and dust particles.Reductions in airflow, which may occur more quickly industy areas, indicate that the filter needs to bereplaced early.

3-20

The filter should be replaced as part of routinescheduled maintenance. See Scheduled Maintenanceon page 6-4 for replacement intervals. See yourretailer for details on changing the filter. To find outwhat type of filter to use, see Normal MaintenanceReplacement Parts on page 6-14.

To access the passenger compartment air filter youmust go through the glove box.

1. Open the glove box and remove all articles fromthe inside.

2. Tilt the glove box door down by squeezing on eachside of the glove box until the door can be loweredfrom its track. Lower the glove box door.

3. Open the passenger compartment air filter door byreaching through the opening in the back of theglove box and raising the tab until the door can beopened downward.

3-21

4. Remove the filter by sliding it out of the housing.

When installing a new air filter make sure the AIR FLOWarrow is pointing downward. Reverse Steps 1 through 5making sure the glove box door snaps back into place.

Warning Lights, Gages,and IndicatorsThis part describes the warning lights and gagesthat may be on your vehicle. The pictures will help youlocate them.Warning lights and gages can signal that something iswrong before it becomes serious enough to causean expensive repair or replacement. Paying attention toyour warning lights and gages could also save youor others from injury.Warning lights come on when there may be or is aproblem with one of your vehicle’s functions. As you willsee in the details on the next few pages, somewarning lights come on briefly when you start theengine just to let you know they’re working. If you arefamiliar with this section, you should not be alarmedwhen this happens.Gages can indicate when there may be or is a problemwith one of your vehicle’s functions. Often gagesand warning lights work together to let you know whenthere’s a problem with your vehicle.When one of the warning lights comes on and stays onas you are driving, or when one of the gages showsthere may be a problem, check the section that tells youwhat to do about it. Please follow this manual’sadvice. Waiting to do repairs can be costly — and evendangerous. So please get to know your warninglights and gages. They’re a big help.

3-22

Instrument Panel ClusterYour instrument panel cluster is designed to let you know at a glance how your vehicle is running. You will knowhow fast you are going, about how much fuel is left in the tank, and many other things you will need to drive safelyand economically.

United States SS Cluster shown, Canada and Base similar

3-23

Speedometer and OdometerYour speedometer lets you see your speed in bothmiles per hour (mph) and kilometers per hour (km/h).

Your vehicle’s odometer works together with thedriver information center. You can set a Trip A andTrip B odometer. See “Trip Information” underDIC Operation and Displays on page 3-38.

The odometer mileage can be checked without thevehicle running. Simply open the driver’s door and themileage will be displayed briefly.

If your vehicle ever needs a new odometer installed, thenew one will be set to the correct mileage total of theold odometer.

TachometerThe tachometer displays the engine speed in revolutionsper minute (rpm).

Notice: If you operate the engine with thetachometer in the shaded warning area, your vehiclecould be damaged, and the damages would notbe covered by your warranty. Do not operatethe engine with the tachometer in the shadedwarning area.

Safety Belt Reminder LightWhen the key is turned to RUN or START, a chime willsound for several seconds to remind you and yourpassengers to buckle your safety belts. The driver safetybelt light will also come on and stay on for severalseconds, then it will flash for several more. You shouldbuckle your seat belt.

This chime and light will berepeated if the driverremains unbuckled and thevehicle is in motion.

If the driver’s belt is buckled, neither the chime nor thelight will come on.

3-24

Passenger Safety BeltReminder LightIf equipped, several seconds after the key is turned toRUN or START, a chime will sound for several secondsto remind the front passenger to buckle their safetybelt. This would only occur if the passenger airbag isenabled. See Passenger Sensing System on page 1-60for more information. The passenger safety belt lightwill also come on and stay on for several seconds, thenit will flash for several more.

This chime and light will berepeated if the passengerremains unbuckled andthe vehicle is in motion.

If the passenger’s safety belt is buckled, neither thechime nor the light will come on.

Airbag Readiness LightThere is an airbag readiness light on the instrumentpanel, which shows the airbag symbol. The systemchecks the airbag’s electrical system for malfunctions.The light tells you if there is an electrical problem.The system check includes the airbag sensor, the airbagmodules, the wiring and the crash sensing anddiagnostic module. For more information on the airbagsystem, see Airbag System on page 1-51.

This light will come onwhen you start yourvehicle, and it will flash fora few seconds. Then thelight should go out. Thismeans the system is ready.

3-25

If the airbag readiness light stays on after you start thevehicle or comes on when you are driving, yourairbag system may not work properly. Have your vehicleserviced right away.

{CAUTION:

If the airbag readiness light stays on after youstart your vehicle, it means the airbag systemmay not be working properly. The airbags inyour vehicle may not inflate in a crash, or theycould even inflate without a crash. To help avoidinjury to yourself or others, have your vehicleserviced right away if the airbag readiness lightstays on after you start your vehicle.

The airbag readiness light should flash for a fewseconds when you turn the ignition key to RUN. If thelight does not come on then, have it fixed so it willbe ready to warn you if there is a problem.

Passenger Airbag Status IndicatorIf your vehicle has the passenger sensing system, thenyour instrument panel has a passenger airbag statusindicator. See Passenger Sensing System on page 1-60.

When the ignition key is turned to RUN or START, thepassenger airbag status indicator will light ON andOFF, or the symbol for on and off, for several secondsas a system check. Then, after several more seconds,the status indicator will light either ON or OFF, or eitherthe on or off symbol to let you know the status of theright front passenger’s frontal airbag.


3-26

If the word ON or the on symbol is lit on the passengerairbag status indicator, it means that the right frontpassenger’s frontal airbag is enabled (may inflate).

{CAUTION:

If the on indicator comes on when you have arear-facing child restraint installed in the rightfront passenger’s seat, it means that thepassenger sensing system has not turned offthe passenger’s frontal airbag. A child in arear-facing child restraint can be seriouslyinjured or killed if the right front passenger’sairbag inflates. This is because the back of therear-facing child restraint would be very closeto the inflating airbag. Do not use a rear-facingchild restraint in the right front passenger’sseat if the airbag is turned on.

Your vehicle has a rear seat that will accommodate arear-facing child restraint. A label on your sun visor says,“Never put a rear-facing child seat in the front.” Thisis because the risk to the rear-facing child is so great, ifthe airbag deploys.

{CAUTION:

Even though the passenger sensing system isdesigned to turn off the passenger’s frontalairbag if the system detects a rear-facing childrestraint, no system is failsafe, and no one canguarantee that an airbag will not deploy undersome unusual circumstance, even though it isturned off. We recommend that rear-facingchild restraints be secured in the rear seat,even if the airbag is off.

If the word OFF or the off symbol is lit on the airbagstatus indicator, it means that the passenger sensingsystem has turned off the right front passenger’s frontalairbag. See Passenger Sensing System on page 1-60for more on this, including important safety information.

3-27

If, after several seconds, all status indicator lightsremain on, or if there are no lights at all, there may be aproblem with the lights or the passenger sensingsystem. See your dealer for service.

{CAUTION:

If the off indicator and the airbag readinesslight ever come on together, it means thatsomething may be wrong with the airbagsystem. If this ever happens, have the vehicleserviced promptly, because an adult-sizeperson sitting in the right front passenger seatmay not have the protection of the frontalairbag. See Airbag Readiness Light onpage 3-25.

Charging System Light

The charging system lightwill come on briefly whenyou turn on the ignition,and the engine is notrunning, as a checkto show you it is working.

Then it should go out when the engine is started.

If it stays on, or comes on while you are driving, youmay have a problem with the electrical charging system.Have it checked by your GM dealer. Driving while thislight is on could drain your battery.

If you must drive a short distance with the light on, becertain to turn off all your accessories, such as the radioand air conditioner.

3-28

Up-Shift LightYour vehicle may have an up-shift light. When this lightcomes on, you should shift to the next higher gear ifweather, road, and traffic conditions allow you to.

This light is located in yourinstrument panel cluster tothe left of the tachometer.

See Manual Transaxle Operation on page 2-25 for moreinformation.

Brake System Warning LightYour vehicle’s hydraulic brake system is divided intotwo parts. If one part is not working, the other part canstill work and stop you. For good braking, though,you need both parts working well.

If the warning light comes on, there is a brake problem.Have your brake system inspected right away.

This light should come on briefly when you turn theignition key to RUN. If it does not come on then, have itfixed so it will be ready to warn you if there is a problem.

United States Only


3-29

When the ignition is on, the brake system warning lightwill also come on when you set your parking brake.The light will stay on if your parking brake doesnot release fully. If it stays on after your parking brake isfully released, it means you have a brake problem.

If the light comes on while you are driving, pull off theroad and stop carefully. Make sure the parking brake isfully released. You may notice that the pedal is harderto push or, the pedal may go closer to the floor. Itmay take longer to stop. If the light is still on, have thevehicle towed for service. See Towing Your Vehicleon page 4-36.

{CAUTION:

Your brake system may not be workingproperly if the brake system warning light is on.Driving with the brake system warning light oncan lead to an accident. If the light is still onafter you have pulled off the road and stoppedcarefully, have the vehicle towed for service.

Anti-Lock Brake SystemWarning Light

If your vehicle is equippedwith the anti-lock brakesystem, the light will comeon when your engine isstarted and may stay onfor several seconds.That is normal.

If the light stays on, turn the ignition off, if the lightcomes on when you are driving, stop as soon aspossible and turn the ignition off. Then start the engineagain to reset the system. If the light still stays on,or comes on again while you are driving, your vehicleneeds service. If the regular brake system warning lightis not on, you still have brakes, but you do not haveanti-lock brakes. If the regular brake system warninglight is also on, you do not have anti-lock brakesand there is a problem with your regular brakes. SeeBrake System Warning Light on page 3-29.

The anti-lock brake system warning light will come onbriefly when you turn the ignition key to RUN. Thisis normal. If the light does not come on then, have itfixed so it will be ready to warn you if there is a problem.

3-30

Enhanced Traction SystemWarning Light

If your vehicle is equippedwith the EnhancedTraction System (ETS),this warning light shouldcome on briefly asyou start the engine.

If the warning light does not come on, then have it fixedso it will be ready to warn you if there is a problem.

If the warning light stays on, or comes on when you aredriving, there may be a problem with your EnhancedTraction System and your vehicle may need service.When this warning light is on, the system will not limitwheel spin. Adjust your driving accordingly.

The Enhanced Traction System warning light may comeon for the following reasons:

• If you turn the system off by moving the shift leverto FIRST (1), the warning light will come on andstay on. To turn the system back on, move the shiftlever back to a position other than FIRST (1).The warning light should go off. See EnhancedTraction System (ETS) on page 4-9 for moreinformation.

• The warning light will come on when you set yourparking brake with the engine running, and it willstay on if your parking brake does not release fully.If the transaxle shift lever is in any position otherthan FIRST (1) and the warning light stays on afteryour parking brake is fully released, it meansthere is a problem with the system.

• If the traction control system is affected by anengine-related problem, the system will turn off andthe warning light will come on.

If the Enhanced Traction System warning light comeson and stays on for an extended period of time when thetransaxle shift lever is in any position other thanFIRST (1), your vehicle needs service.

3-31

Engine Coolant TemperatureWarning Light

The engine coolanttemperature warning lightwill come on when theengine has overheated.

If this happens you should pull over and turn off theengine as soon as possible. See Engine Overheating onpage 5-29 for more information.

Notice: Driving with the engine coolant temperaturewarning light on could cause your vehicle tooverheat. See Engine Overheating on page 5-29.Your vehicle could be damaged, and it might not becovered by your warranty. Never drive with theengine coolant temperature warning light on.

This light will also come on when starting your vehicle.If it doesn’t, have your vehicle serviced.

Malfunction Indicator Lamp

Check Engine LightYour vehicle is equippedwith a computer whichmonitors operation of thefuel, ignition, and emissioncontrol systems.

This system is called OBD II (On-BoardDiagnostics-Second Generation) and is intended toassure that emissions are at acceptable levels for thelife of the vehicle, helping to produce a cleanerenvironment. The check engine light comes on toindicate that there is a problem and service is required.Malfunctions often will be indicated by the systembefore any problem is apparent. This may prevent moreserious damage to your vehicle. This system is alsodesigned to assist your service technician in correctlydiagnosing any malfunction.

Notice: If you keep driving your vehicle with thislight on, after awhile, your emission controlsmay not work as well, your fuel economy may notbe as good, and your engine may not run assmoothly. This could lead to costly repairs that maynot be covered by your warranty.

3-32

Notice: Modifications made to the engine,transaxle, exhaust, intake, or fuel system of yourvehicle or the replacement of the original tires withother than those of the same Tire PerformanceCriteria (TPC) can affect your vehicle’s emissioncontrols and may cause this light to come on.Modifications to these systems could lead to costlyrepairs not covered by your warranty. This mayalso result in a failure to pass a required EmissionInspection/Maintenance test. See Accessoriesand Modifications on page 5-3.

This light should come on, as a check to show you it isworking, when the ignition is on and the engine isnot running. If the light does not come on, have itrepaired. This light will also come on during amalfunction in one of two ways:

• Light Flashing — A misfire condition has beendetected. A misfire increases vehicle emissions andmay damage the emission control system on yourvehicle. Diagnosis and service may be required.

• Light On Steady — An emission control systemmalfunction has been detected on your vehicle.Diagnosis and service may be required.

If the Light is FlashingThe following may prevent more serious damage toyour vehicle:

• Reducing vehicle speed

• Avoiding hard accelerations

• Avoiding steep uphill grades

• If you are towing a trailer, reduce the amount ofcargo being hauled as soon as it is possible

If the light stops flashing and remains on steady, see“If the Light Is On Steady” following.

If the light continues to flash, when it is safe to do so,stop the vehicle. Find a safe place to park your vehicle.Turn the key off, wait at least 10 seconds and restartthe engine. If the light remains on steady, see “If theLight Is On Steady” following. If the light is still flashing,follow the previous steps, and see your dealer forservice as soon as possible.

3-33

If the Light Is On SteadyYou may be able to correct the emission systemmalfunction by considering the following:

Did you recently put fuel into your vehicle?

If so, reinstall the fuel cap, making sure to fully installthe cap. See Filling the Tank on page 5-8. Thediagnostic system can determine if the fuel cap hasbeen left off or improperly installed. A loose or missingfuel cap will allow fuel to evaporate into the atmosphere.A few driving trips with the cap properly installedshould turn the light off.

Did you just drive through a deep puddle of water?

If so, your electrical system may be wet. The conditionwill usually be corrected when the electrical systemdries out. A few driving trips should turn the light off.

Have you recently changed brands of fuel?

If so, be sure to fuel your vehicle with quality fuel. SeeGasoline Octane on page 5-5. Poor fuel quality willcause your engine not to run as efficiently as designed.You may notice this as stalling after start-up, stallingwhen you put the vehicle into gear, misfiring, hesitationon acceleration, or stumbling on acceleration. (Theseconditions may go away once the engine is warmed up.)This will be detected by the system and cause thelight to turn on.

If you experience one or more of these conditions,change the fuel brand you use. It will require at leastone full tank of the proper fuel to turn the light off.

If none of the above steps have made the light turn off,your dealer can check the vehicle. Your dealer hasthe proper test equipment and diagnostic tools to fix anymechanical or electrical problems that may havedeveloped.

Emissions Inspection and MaintenanceProgramsSome state/provincial and local governments have ormay begin programs to inspect the emission controlequipment on your vehicle. Failure to pass thisinspection could prevent you from getting a vehicleregistration.

Here are some things you need to know to help yourvehicle pass an inspection:

Your vehicle will not pass this inspection if the checkengine light is on or not working properly.

3-34

Your vehicle will not pass this inspection if the OBD(on-board diagnostic) system determines that criticalemission control systems have not been completelydiagnosed by the system. The vehicle would beconsidered not ready for inspection. This can happen ifyou have recently replaced your battery or if yourbattery has run down. The diagnostic system isdesigned to evaluate critical emission control systemsduring normal driving. This may take several daysof routine driving. If you have done this and your vehiclestill does not pass the inspection for lack of OBDsystem readiness, your GM dealer can prepare thevehicle for inspection.

Oil Pressure Light

If you have a low engineoil pressure problem, thislight will stay on afteryou start your engine, orcome on when youare driving. This indicatesthat your engine is notreceiving enough oil.

The engine could be low on oil, or could have someother oil problem. Have it fixed immediately.

The oil light could also come on in three other situations:

• When the ignition is on but the engine is notrunning, the light will come on as a test to show youit is working, but the light will go out when youturn the ignition to START. If it does not come onwith the ignition on, you may have a problemwith the fuse or bulb. Have it fixed right away.

• If you are idling at a stop sign, the light may blinkon and then off.

• If you make a hard stop, the light may come on fora moment. This is normal.

{CAUTION:

Do not keep driving if the oil pressure is low. Ifyou do, your engine can become so hot that itcatches fire. You or others could be burned.Check your oil as soon as possible and haveyour vehicle serviced.

Notice: Lack of proper engine oil maintenance maydamage the engine. The repairs would not be coveredby your warranty. Always follow the maintenanceschedule in this manual for changing engine oil.

3-35

Security Light

For information regardingthis light, seeTheft-Deterrent Systemson page 2-14.

Fog Lamp Light

If equipped, the fog lampslight will come on when thefog lamps are in use.

The light will go out when the fog lamps are turned off.See Fog Lamps on page 3-15 for more information.

Highbeam On Light

This light will come onwhen the high-beamheadlamps are in use.

See Headlamp High/Low-Beam Changer on page 3-8.

Fuel Gage

Your fuel gage tells youabout how much fuel youhave left.

3-36

Here are four things that some owners ask about. Noneof these show a problem with your fuel gage:

• At the service station, the gas pump shuts offbefore the gage reads full.

• It takes a little more or less fuel to fill up than thegage indicated. For example, the gage may haveindicated the tank was half full, but it actually took alittle more or less than half the tank’s capacity tofill the tank.

• The gage moves a little when you turn a corner orspeed up.

• The gage doesn’t go back to empty when you turnoff the ignition.

For your fuel tank capacity, see Capacities andSpecifications on page 5-102.

Boost Gage

If equipped, this gage is located near the driver’s side ofthe instrument panel cluster.

This gage indicates vacuum during light to moderatethrottle and boost under heavier throttle.

This gage displays the air pressure level in theintake manifold before it enters the engine’scombustion chamber.

This gage is automatically centered at zero every timethe ignition is turned to RUN. Actual vacuum or boost isdisplayed from this zero point. Changes in ambientpressure, such as driving in mountains and changingweather, will slightly change the zero reading.


3-37

Driver Information Center (DIC)The Driver Information Center (DIC) display gives youthe status of many of your vehicle’s systems. The DIC isalso used to display driver personalization menu modesand warning/status messages. All messages will appearin the DIC display, located at the bottom of thetachometer on the instrument panel cluster.

The DIC buttons arelocated to the right of thesteering wheel on theinstrument panel.

4 (Information): Press this button to scroll through thevehicle information mode displays.

r (Reset): Press this button to reset some vehicleinformation mode displays, select a personalization menumode setting, or acknowledge a warning message.

Press and hold the information and reset buttons at thesame time for several seconds, then release to enterthe personalization menu. See DIC VehiclePersonalization on page 3-42 for more information.

DIC Operation and DisplaysThe DIC comes on when the ignition is on. The DIC hasdifferent modes which can be accessed by pressingthe DIC buttons. The button functions are detailed inthe following.

Information Modes

4 (Information): Press this button to scroll through thefollowing vehicle information modes:

Outside Air Temperature and OdometerPress the information button until the outside airtemperature and the odometer are displayed. This modeshows the temperature outside of the vehicle in eitherdegrees Fahrenheit (°F) or degrees Celsius (°C) and thetotal distance the vehicle has been driven in eithermiles (mi) or kilometers (km). The outside airtemperature will appear on the left side of the DICdisplay and the odometer will appear on the right side ofthe display.

To change the DIC display to English or metric units,see “UNITS” under DIC Vehicle Personalization onpage 3-42.

3-38

TRIP A or TRIP BPress the information button until TRIP A or TRIP B isdisplayed. These modes show the current distancetraveled since the last reset for each trip odometer ineither miles (mi) or kilometers (km). Both odometers canbe used at the same time.

Each trip odometer can be reset to zero separately bypressing and holding the reset button for a few secondswhile the desired trip odometer is displayed.

FUEL RANGEPress the information button until FUEL RANGE isdisplayed. This mode shows the remaining distance youcan drive without refueling in either miles (mi) orkilometers (km). It is based on fuel economy and thefuel remaining in the tank.

The fuel economy data used to determine fuel range isan average of recent driving conditions. As yourdriving conditions change, this data is gradually updated.The FUEL RANGE mode cannot be reset.

ECON (Economy)Press the information button until ECON is displayed.This mode shows how many miles per gallon (mpg)or liters per 100 kilometers (L/100 km) your vehicle isgetting based on current and past driving conditions.

Press and hold the reset button while ECON is displayedto reset the average fuel economy. Average fueleconomy will then be calculated starting from that point.If the average fuel economy is not reset, it will becontinually updated each time you drive.

AV (Average) SPEEDPress the information button until AV SPEED isdisplayed. This mode shows the vehicle’s averagespeed in miles per hour (mph) or kilometers perhour (km/h).

Press and hold the reset button while AV SPEED isdisplayed to reset the average vehicle speed.

3-39

OIL LIFEPress the information button until OIL LIFE is displayed.The engine oil life system shows an estimate of theoil’s remaining useful life. It will show 100% when thesystem is reset after an oil change. It will alert youto change your oil on a schedule consistent with yourdriving conditions.

In addition to the engine oil life system monitoring theoil life, additional maintenance is recommended inthe Maintenance Schedule in this manual. See EngineOil on page 5-15 and Scheduled Maintenance onpage 6-4.

Always reset the engine oil life system after an oilchange. See “How to Reset the Engine Oil LifeSystem” under Engine Oil Life System on page 5-20and “OIL–LIFE RESET” under DIC VehiclePersonalization on page 3-42.

COOLANTPress the information button until COOLANT isdisplayed. This mode shows the temperature of theengine coolant in either degrees Fahrenheit (°F)or degrees Celsius (°C).

DIC Warnings and MessagesThese messages will appear if there is a problemdetected in one of your vehicle’s systems.

Any message will clear when the vehicle’s condition isno longer present. The warning message will come backon the next time the vehicle is turned off and back onif the condition is still present. With most messages,a warning chime will sound when the message isdisplayed. You can also acknowledge and clear somewarning messages from the DIC display by pressingeither the reset or information buttons. Your vehicle mayhave other warning messages.

AUTO (Automatic) LIGHTS OFFThis message is displayed if the automatic headlampsystem is disabled with the headlamp switch.

AUTO (Automatic) LIGHTS ONThis message is displayed if the automatic headlampsystem is enabled with the headlamp switch.

BRAKE FLUIDThis message will display if the ignition is on to informthe driver that the brake fluid level is low. Have thebrake system serviced by your GM dealer as soonas possible.

3-40

CHANGE OIL SOONThis message is displayed when the life of the engineoil has expired and it should be changed.

When you acknowledge the CHANGE OIL SOONmessage by clearing it from the display, you still mustreset the engine oil life system separately. See“OIL-LIFE RESET” under DIC Vehicle Personalizationon page 3-42, Engine Oil Life System on page 5-20, andScheduled Maintenance on page 6-4 for moreinformation.

CHECK GAS CAPThis message is displayed if the gas cap has not beenfully tightened. You should recheck your gas cap toensure that it is on properly. A few driving trips with thecap properly installed should turn the display off.

CRUISE ENGAGEDThis message is displayed when the cruise controlsystem is active. See Cruise Control on page 3-10 formore information.

DOOR AJARThis message is displayed if one or more of thevehicle’s doors are not closed properly. When thismessage appears, you should make sure that the dooris closed completely.

ENGINE DISABLEDThis message is displayed if the starting of the engine isdisabled. Have your vehicle serviced by your GM dealerimmediately.

ENG (Engine) PWR (Power) REDUCEDThis message informs you that the vehicle has reducedengine power to avoid damaging the engine.

ICE POSSIBLEThis message appears when the outside air temperatureis cold enough to create icy road conditions.

KEY FOB BATT (Battery) LOWThis message is displayed if the remote keyless entrytransmitter battery is low. See “Battery Replacement”under Remote Keyless Entry System Operation onpage 2-4.

LOW COOLANTIf your vehicle has a 2.0L engine, this message isdisplayed when there is a low level of engine coolant.Have the cooling system serviced by your GM dealer assoon as possible. See Engine Coolant on page 5-23for more information.

3-41

LOW FUELThis message is displayed when your vehicle is low onfuel. You should refill the fuel tank as soon aspossible. See Fuel Gage on page 3-36, Filling the Tankon page 5-8, and Fuel on page 5-5 for more information.

LOW TRACTIONThis message is displayed when the Enhanced TractionSystem (ETS) is actively limiting wheel spin. Slipperyroad conditions may exist if this message is displayed,so adjust your driving accordingly. See EnhancedTraction System (ETS) on page 4-9 for moreinformation.

PARKING BRAKEThis message is displayed if the parking brake is leftengaged. See Parking Brake on page 2-27.

POWER STEERINGThis message is displayed if a problem has beendetected with the electric power steering. Have yourvehicle serviced by your GM dealer immediately.

SERVICE AIR BAGThis message is displayed when there is a problem withthe airbag system. Let only a qualified technicianwork on your vehicle. Have your vehicle serviced byyour GM dealer immediately.

TRUNK AJARThis message is displayed when the trunk lid of yourvehicle is not closed completely. You should make surethat the trunk lid is closed completely. See Trunk onpage 2-10.

DIC Vehicle PersonalizationYour vehicle has personalization capabilities that allowyou to program certain features to a preferred setting.All of the features listed may not be available onyour vehicle. Only the features available will bedisplayed on your DIC.

The default settings for the features were set when yourvehicle left the factory, but may have been changedfrom their default state since then.

3-42

To change feature settings, use the following procedure:

Entering Personalization Menu1. Turn the ignition on while the vehicle is stopped.2. Press and hold the information and reset buttons at

the same time for several seconds, then release toenter the personalization menu.If the vehicle speed is greater than 2 mph (3 km/h),only the UNITS menu will be accessible.

3. Press the information button to scroll through theavailable personalization menu modes.Press the reset button to scroll through the availablesettings for each mode.If you do not make a selection within ten seconds,the display will go back to the previous informationdisplayed.

Personalization Menu ModesUNITSThis feature allows you to select the units ofmeasurement in which the DIC will display the vehicleinformation. When UNITS appears on the display, pressthe reset button to scroll through the available settings:

ENGLISH (default in United States): All informationwill be displayed in English units. For example, distancewill be shown in miles (mi) and fuel economy in milesper gallon (mpg).

METRIC (default in Canada): All information will bedisplayed in metric units. For example, distance will beshown in kilometers (km) and fuel economy in litersper 100 kilometers (L/100 km).

Choose one of the available settings and press theinformation button to select it and move on to the nextfeature.

3-43

OIL-LIFE RESETWhen this feature is displayed, you can reset the engineoil life system. To reset the system, see Engine OilLife System on page 5-20. See “OIL LIFE” underDIC Operation and Displays on page 3-38 for moreinformation.

LOCK HORNIf your vehicle has remote keyless entry, this feature,which allows the vehicle’s horn to chirp every timethe lock button on the remote keyless entry transmitteris pressed, can be enabled or disabled. When LOCKHORN appears on the display, press the reset button toscroll through the available settings:

OFF (default): The horn will not chirp on the first pressof the remote keyless entry transmitter lock button.The horn will still chirp on the second press.

ON: The horn will chirp on the first press of the remotekeyless entry transmitter.

See Remote Keyless Entry System Operation onpage 2-4 for more information.

Choose one of the available settings and press theinformation button to select it and move on to thenext feature.

UNLOCK HORNIf your vehicle has remote keyless entry, this feature,which allows the vehicle’s horn to chirp on the first pressof the unlock button on the remote keyless entrytransmitter, can be enabled or disabled. When UNLOCKHORN appears on the display, press the reset buttonto scroll through the available settings:

OFF (default): The horn will not chirp when the unlockbutton on the remote keyless entry transmitter is pressed.

ON: The horn will chirp on the first press of the unlockbutton on the remote keyless entry transmitter.See Remote Keyless Entry System Operation onpage 2-4 for more information.Choose one of the available settings and press theinformation button to select it and move on to thenext feature.

3-44

LIGHT FLASHIf your vehicle has remote keyless entry, this feature,which allows the vehicle’s exterior hazard/turn signallighting to flash every time the lock or unlock button onthe remote keyless entry transmitter is pressed, canbe enabled or disabled. When LIGHT FLASH appearson the display, press the reset button to scrollthrough the available settings:

OFF: The exterior hazard/turn signal lighting will notflash when the lock or unlock button on the remotekeyless entry transmitter is pressed.

ON (default): The exterior hazard/turn signal lightingwill flash when the lock or unlock button on the remotekeyless entry transmitter is pressed.See Remote Keyless Entry System Operation onpage 2-4 for more information.Choose one of the available settings and press theinformation button to select it and move on to thenext feature.

DELAY LOCKThis feature, which delays the actual locking of thevehicle, can be enabled or disabled. When DELAYLOCK appears on the display, press the reset button toscroll through the available settings:

ON (default): The doors will not lock until five secondsafter the last door is closed. You can temporarilyoverride delayed locking by pressing the power lockswitch or the lock button on the remote keylessentry transmitter a second time.

OFF: The doors will lock immediately when pressingthe power lock switch or the lock button on the remotekeyless entry transmitter.See Power Door Locks on page 2-8, Delayed Lockingon page 2-8, and Remote Keyless Entry SystemOperation on page 2-4 for more information.Choose one of the available settings and press theinformation button to select it and move on to thenext feature.

3-45

AUTO UNLK (Unlock)This feature, which allows the vehicle to automaticallyunlock certain doors, can be enabled or disabled. WhenAUTO UNLK appears on the display, press the resetbutton to scroll through the available settings:

ALL (default): All of the doors will automatically unlock.

DRIVER: The driver’s door will automatically unlock.

NONE: None of the doors will automatically unlock. Youwill need to manually unlock the doors.

If you have a manual transaxle vehicle, the door(s) willautomatically unlock when the ignition is turned off.

If you have an automatic transaxle vehicle, youcan select when the automatic unlocking will occur. See“UNLK (Unlock) (Automatic Transaxle Only)” following.

See Programmable Automatic Door Unlock on page 2-9for more information.


UNLK (Unlock) (Automatic Transaxle Only)This screen displays only if your vehicle has anautomatic transaxle and DRIVER or ALL is selected forthe AUTO UNLK feature. This feature determineswhen the automatic door unlocking will occur. WhenUNLK appears on the display, press the reset button toscroll through the available settings:

KEY OFF: The door(s) will unlock when the ignition isturned off.

SHIFT TO P (Park) (default): The door(s) will unlockwhen the vehicle is shifted into PARK (P).

See Programmable Automatic Door Unlock on page 2-9for more information.


3-46

EXT (Exterior) LIGHTSIf your vehicle has remote keyless entry, this feature,which allows the vehicle’s exterior perimeter lighting toturn on each time the unlock button on the remotekeyless entry transmitter is pressed, can be enabled ordisabled. When EXT LIGHTS appears on the display,press the reset button to scroll through the availablesettings:

OFF: The exterior perimeter lighting will not turn onwhen the unlock button on the remote keylessentry transmitter is pressed.

ON (default): The exterior perimeter lighting will turn onwhen the unlock button on the remote keyless entrytransmitter is pressed.

See Remote Keyless Entry System Operation onpage 2-4 for more information.


LANGUAGEThis feature allows you to select the language in whichthe DIC will display. Press the reset button to scrollthrough the available settings:

ENGLISH (default): The DIC will display all informationin English.

FRENCH: The DIC will display all informationin French.

SPANISH: The DIC will display all informationin Spanish.

GERMAN: The DIC will display all informationin German.

Choose one of the available settings and press theinformation button to select it and exit out of thepersonalization menu mode.

Exiting Personalization MenuThe personalization menu will be exited when any of thefollowing conditions occur:

• A ten second time period has elapsed.

• The ignition is turned off.

• The end of the personalization menu list is reached.

3-47

Audio System(s)Determine which radio your vehicle has and thenread the pages following to familiarize yourself withits features.Driving without distraction is a necessity for a saferdriving experience. See Defensive Driving on page 4-2.By taking a few moments to read this manual andget familiar with your vehicle’s audio system, you canuse it with less effort, as well as take advantage ofits features. While your vehicle is parked, set up youraudio system by presetting your favorite radio stations,setting the tone and adjusting the speakers. Then,when driving conditions permit, you can tune to yourfavorite stations using the presets and steeringwheel controls (if equipped).

{CAUTION:

This system provides you with a far greateraccess to audio stations and song listings.Giving extended attention to entertainmenttasks while driving can cause a crash and youor others can be injured or killed. Always keepyour eyes on the road and your mind on thedrive — avoid engaging in extended searchingwhile driving.

Keeping your mind on the drive is important for safedriving. For more information, see Defensive Driving onpage 4-2. Get familiar with your vehicle’s audiosystem so you can use it with less effort and take fulladvantage of its features.Here are some ways in which you can help avoiddistraction while driving.While your vehicle is parked:• Familiarize yourself with all of its controls.• Familiarize yourself with its operation.• Set up your audio system by presetting your

favorite radio stations, setting the tone, andadjusting the speakers. Then, when drivingconditions permit, you can tune to your favoriteradio stations using the presets and steering wheelcontrols (if equipped).

Notice: Before adding any sound equipment toyour vehicle, such as an audio system, CD player,CB radio, mobile telephone, or two-way radio, makesure that it can be added by checking with yourdealer. Also, check federal rules covering mobileradio and telephone units. If sound equipment canbe added, it is very important to do it properly.Added sound equipment may interfere withthe operation of your vehicle’s engine, radio, orother systems, and even damage them. Yourvehicle’s systems may interfere with the operationof sound equipment that has been added.

3-48

Notice: The chime signals related to seat belts,parking brake, and other functions of your vehicleoperate through the GM radio/entertainment system.If that equipment is replaced or additional equipmentis added to your vehicle, the chimes may not work.Make sure that replacement or additional equipmentis compatible with your vehicle before installing it.See Accessories and Modifications on page 5-3.

Your vehicle has a feature called Retained AccessoryPower (RAP). With RAP, the audio system can beplayed even after the ignition is turned off. See RetainedAccessory Power (RAP) on page 2-20 for moreinformation.

Setting the Time for Radios withoutRadio Data Systems (RDS)To set the hour, press the clock button until the hournumber flashes. Then turn the ADJ knob to increase orto decrease. To set the minutes, press the clockbutton again until the minute numbers flash. Then turnthe ADJ knob to increase or to decrease. The timecan be set with the ignition on or off.

Setting the Time for Radios withRadio Data Systems (RDS)To set the hour, press the clock button. The clocksymbol will appear on the display and the hour numberwill flash. Then turn the ADJ knob to increase or todecrease. To set the minutes, press the clock buttonagain. The minute numbers will flash. Then turn the ADJknob to increase or to decrease. The time can be setwith the ignition on or off.

To synchronize the time with an FM station broadcastingRadio Data System (RDS) information, press andhold the clock button to enter the clock set mode, thenpress and hold the clock button for three secondsuntil UPDATED appears on the display. If the time isnot available from the station, NO UPDATE will appearon the display.

RDS time is broadcast once a minute. After tuning to anRDS broadcast station, it may take a few minutes forthe time to update.

3-49

Radio with CD (Base Level)

Playing the Radio

O (Power): Press this knob to turn the system onand off.

u (Volume): Turn this knob to increase or todecrease the volume.

DISP (Display): Press this knob to switch the displaybetween the time radio station frequency. Whenthe ignition is off, press this knob to display the time.

To change the default on the display, press theDISP knob until you see the display you want, then holdthe knob for two seconds. The radio will produce abeep and the selected display will now be the default.

Finding a StationBAND: Press this button to switch between FM1, FM2,and AM. The display will show the selection.

ADJ (Adjust): Turn this knob to select radio stations.

© SEEK ¨: Press the right or left arrow to go tothe next or to the previous station and stay there.

To scan stations, press and hold either arrow fortwo seconds until you hear a beep. The radio will go toa station, play for a few seconds, then go on to thenext station. Press either arrow again to stop scanning.

To scan preset stations, press and hold either arrowfor more than four seconds until you hear two beeps.The radio will go to the first preset station stored on thepushbuttons, play for a few seconds, then go on tothe next preset station. Press either arrow again to stopscanning presets.

The radio will only seek and scan stations with a strongsignal that are in the selected band.

3-50

Setting Preset StationsUp to 18 stations (six FM1, six FM2, and six AM), canbe programmed on the six numbered pushbuttons,by performing the following steps:

1. Turn the radio on.

2. Press BAND to select FM1, FM2, or AM.

3. Tune in the desired station.

4. Press and hold one of the six numberedpushbuttons until you hear a beep. Whenever thatnumbered pushbutton is pressed, the stationthat was set will return.

5. Repeat the steps for each pushbutton.

Setting the Tone (Bass/Treble)

EQ (Tone): To adjust the bass or the treble, press andrelease the EQ button until BASS or TREB appearson the display. Turn the ADJ knob to increase orto decrease. The display will show the bass or treblelevel. If a station is weak or noisy, decrease the treble.

To adjust bass or treble to the middle position, selectBASS or TREB. Then press and hold the EQ button formore than two seconds. You will hear a beep andthe level will be adjusted to the middle position.

To adjust the tone controls to the middle position, firstend out of tone by pressing another button, causing theradio to perform that function, or by waiting five secondsfor the display to return to the default display. Then pressand hold the EQ button for more than two seconds untilyou hear a beep. CEN will appear on the display.

Adjusting the Speakers (Balance/Fade)

x w (Balance/Fade): To adjust the balance betweenthe right and the left speakers, press and releasethe balance/fade button until BAL appears on thedisplay. Then turn the ADJ knob to move the soundtoward the right or the left speakers.

To adjust the fade between the front and the rearspeakers, press and release the balance/fade buttonuntil FADE appears on the display. Then turn theADJ knob to move the sound toward the front or therear speakers.

3-51

To adjust the balance or the fade to the middle position,select BAL or FADE. Then press and hold thebalance/fade button for more than two seconds. You willhear a beep and the level will be adjusted to themiddle position.

To adjust the speaker controls to the middle position,first end out of balance and fade by pressing anotherbutton, causing the radio to perform that function, or bywaiting five seconds for the display to return to thedefault display. Then press and hold the balance/fadebutton for more than two seconds until you hear a beep.CEN will appear on the display.

Radio Messages

CAL (Calibration): The audio system has beencalibrated for your vehicle from the factory. If CALappears on the display it means that the radio has notbeen configured properly for your vehicle and mustbe returned to your GM dealer for service.

LOCK: This message is displayed when theTHEFTLOCK® system has locked up the radio. Takethe vehicle to your GM dealer for service.

If any error occurs repeatedly or if an error cannot becorrected, contact your GM dealer.

Playing a CDInsert a CD partway into the slot, label side up. Theplayer will pull it in and the CD should begin playing.If you want to insert a CD with the ignition off, first pressthe eject button or the DISP knob.

As each new track starts to play, the track number willappear on the display.

If the ignition or radio is turned off, with a CD in theplayer, it will stay in the player. When the ignitionor radio is turned on, the CD will start playing, where itstopped, if it was the last selected audio source.

The CD player can play the smaller 3 inch (8 cm) singleCDs without an adapter ring. Full-size CDs and thesmaller CDs are loaded in the same manner.

If playing a CD-R, the sound quality may be reduceddue to CD-R quality, the method of recording, the qualityof the music that has been recorded, and the way theCD-R has been handled. There may be an increasein skipping, difficulty in finding tracks, and/or difficulty inloading and ejecting. If these problems occur, checkthe bottom surface of the CD. If the surface of the CD isdamaged, such as cracked, broken, or scratched, theCD will not play properly. If the surface of the CDis soiled, see Care of Your CDs on page 3-81 later inthis section.

If there is no apparent damage, try a known good CD.

3-52

Do not add any label to a CD, it could get caught in theCD player. If a CD is recorded on a personal computerand a description label is needed, try labeling the top ofthe recorded CD with a marking pen instead.

Notice: If you add any label to a CD, insert morethan one CD into the slot at a time, or attemptto play scratched or damaged CDs, you coulddamage the CD player. When using the CD player,use only CDs in good condition without anylabel, load one CD at a time, and keep the CD playerand the loading slot free of foreign materials,liquids, and debris.

If an error appears on the display, see “CD Messages”later in this section.

1r (Reverse): Press and hold this pushbutton toreverse quickly within a track. You will hear sound at areduced volume. Release this pushbutton to playthe passage. The elapsed time of the track will appearon the display.

2[ (Fast Forward): Press and hold this pushbuttonto advance quickly within a track. You will hearsound at a reduced volume. Release this pushbutton toplay the passage. The elapsed time of the track willappear on the display.

5 y (Random): Press this pushbutton to hear thetracks in random, rather than sequential, order. T# andRDM will appear on the display. Press RDM againto turn off random play, OFF will appear on the display.

6 N (Repeat): Press this pushbutton once tohear a track over again. RPT will appear on the display.The current track will continue to repeat. Press RPTagain to turn off repeat play, OFF will appear onthe display.

© SEEK ¨: Press the left arrow to go to the start ofthe current track if it has been playing for more thaneight seconds. Press the right arrow to go to thenext track. The track number will appear on the display.If either arrow is pressed more than once, the playerwill continue moving backward or forward throughthe CD.

If either arrow is held for more then two seconds, theCD will enter CD scan mode and the CD will playthe first 10 seconds of each track. Press this buttonagain to stop scanning.

3-53

DISP (Display): Press this knob to see the currenttrack number or the elapsed time of the track.

To change the default on the display, press this knobuntil you see the display you want, then hold theknob for two seconds. You will hear a beep and theselected display will now be the default.

BAND: Press this button to listen to the radio when aCD is playing. The inactive CD will remain safelyinside the radio for future listening.

B (CD): Press this button to play a CD when listeningto the radio.

Z (Eject): Press this button to eject a CD. Eject maybe activated with either the ignition or radio off. CDsmay be loaded with the ignition and radio off if thisbutton is pressed first.

CD MessagesIf the CD comes out, it could be for one of the followingreasons:

• It is very hot. When the temperature returns tonormal, the CD should play.

• You are driving on a very rough road. When theroad becomes smoother, the CD should play.

• The CD is dirty, scratched, wet, or upside down.

• The air is very humid. If so, wait about an hour andtry again.

• There may have been a problem while burningthe CD.

• The label may be caught in the CD player.

If the CD is not playing correctly, for any other reason,try a known good CD.

If any error occurs repeatedly or if an error cannot becorrected, contact your GM dealer. If the radio displaysan error message, write it down and provide it toyour GM dealer when reporting the problem.

3-54

Radio with CD (Uplevel)

Radio Data System (RDS)The audio system has a Radio Data System (RDS).RDS features are available for use only on FM stationsthat broadcast RDS information.

With RDS, the radio can do the following:

• Seek to stations broadcasting the selected type ofprogramming

• Receive announcements concerning local andnational emergencies

• Display messages from radio stations

This system relies upon receiving specific informationfrom these stations and will only work when theinformation is available. In rare cases, a radio stationmay broadcast incorrect information that will causethe radio features to work improperly. If this happens,contact the radio station.

While the radio is tuned to an RDS station, the stationname or call letters will appear on the display. RDSstations may also provide the time of day, a programtype (PTY) for current programming, and the nameof the program being broadcast.

XM™ Satellite Radio ServiceXM™ is a satellite radio service that is based in the48 contiguous United States and in Canada (ifavailable). XM™ offers over 100 coast-to-coast channelsincluding music, news, sports, talk, and children’sprogramming. XM™ provides digital quality audio andtext information that includes song title and artist name.A service fee is required in order to receive the XM™service. For more information, contact XM™ atwww.xmradio.com or call 1-800-852-XMXM (9696).

3-55

Playing the Radio



AUTOu (Automatic Volume): With automaticvolume, the audio system adjusts automatically to makeup for road and wind noise as you drive.

Set the volume at the desired level. Press this button toselect LOW, MEDIUM, or HIGH. AUTO VOL LOW,AUTO VOL MEDIUM, or AUTO VOL HIGH will appearon the display. Each higher setting will allow formore volume compensation at faster vehicle speeds.Then as you drive, automatic volume increasesthe volume, as necessary, to overcome noise at anyspeed. The volume level should always sound the sameto you as you drive. AUTO VOL NONE will appear onthe display if the radio cannot determine the vehiclespeed or if the engine is not running. To turn automaticvolume off, press this button until AUTO VOL OFFappears on the display.

DISP (Display): When the ignition is off, press thisknob to display the time.

For RDS, press the DISP knob to change what appearson the display. The display options are station name,RDS station frequency, PTY, and the name of theprogram (if available).

For XM™ (if equipped), press the DISP knob, while inXM™ mode, to retrieve four different categories ofinformation related to the current song or channel:Artist, Song Title, Category or PTY, ChannelNumber/Channel Name.

To change the default on the display, press the DISPknob until you see the display you want, then holdthe knob for two seconds. The radio will produce a beepand the selected display will now be the default.

Finding a Station

BAND: Press this button to switch between FM1, FM2,AM, or XM1 or XM2 (if equipped). The display willshow the selection.


© SEEK ¨: Press the right or the left arrow togo to the next or to the previous station and stay there.


3-56

To scan preset stations, press and hold either arrow formore than four seconds until you hear two beeps.The radio will go to the first preset station stored on thepushbuttons, play for a few seconds, then go on tothe next preset station. Press either arrow again to stopscanning presets.


Setting Preset StationsUp to 30 stations (six FM1, six FM2, and six AM,six XM1 and six XM2 (if equipped)), can be programmedon the six numbered pushbuttons, by performing thefollowing steps:


2. Press BAND to select FM1, FM2, AM, or XM1or XM2.


4. Press AUTO EQ to select the equalization.

5. Press and hold one of the six numberedpushbuttons until you hear a beep. Whenever thatnumbered pushbutton is pressed, the stationthat was set will return and the equalization thatwas selected will be stored for that pushbutton.



EQ (Tone): To adjust the bass or the treble, press andrelease the EQ button until BASS or TREBLE appearson the display. Turn the ADJ knob to increase or todecrease. The display will show the bass or treble level.If a station is weak or noisy, decrease the treble.

To adjust bass or treble to the middle position, selectBASS or TREBLE. Then press and hold the EQ buttonfor more than two seconds. You will hear a beepand the level will be adjusted to the middle position.

To adjust the tone controls to the middle position,first end out of tone by pressing another button, causingthe radio to perform that function, or by waitingfive seconds for the display to return to the defaultdisplay. Then press and hold the EQ button for morethan two seconds until you hear a beep. ALLCENTERED will appear on the display.

AUTO EQ (Automatic Equalization): Press this buttonto select customized equalization settings designedfor country, jazz, talk, pop, rock, and classical.

3-57




To adjust the balance or the fade to the middle position,select BAL or FADE. Then press and hold thebalance/fade button for more than two seconds. You willhear a beep and the level will be adjusted to themiddle position.

To adjust the speaker controls to the middle position,first end out of balance and fade by pressing anotherbutton, causing the radio to perform that function, or bywaiting five seconds for the display to return to thedefault display. Then press and hold the balance/fadebutton for more than two seconds until you hear a beep.ALL CENTERED will appear on the display.

Finding a Program Type (PTY) Station(RDS and XM™)To select and find a desired PTY perform the following:

1. Press the P-TYPE button to activate programtype select mode. PTY and a program type willappear on the display.

2. Turn the ADJ knob to select a PTY.

3. Once the desired PTY is displayed, press theSEEK left arrow to select the PTY and to takeyou to the PTY’s first station.

4. To go to another station within that PTY press theSEEK left arrow again. If the radio cannot find thedesired PTY, NONE FOUND will appear on thedisplay and the radio will return to the last stationyou were listening to.After 15 seconds of inactivity or if the P-TYPEbutton is pressed again, the radio will exit programtype select mode.

3-58

RDS MessagesALERT!: Alert warns of local or national emergencies.When an alert announcement comes on the currentradio station, ALERT! will appear on the display. You willhear the announcement, even if the volume is low ora CD is playing. If a CD is playing, play will stop duringthe announcement. Alert announcements cannot beturned off.

ALERT! will not be affected by tests of the emergencybroadcast system. This feature is not supported byall RDS stations.

MSG (Message): If the current station has a message,MSG will appear on the display. Press this button tosee the message. The message may display the artist,song title, call in phone numbers, etc.

If the entire message is not displayed, parts of themessage will appear every three seconds. To scrollthrough the message, press and release the MSG button.A new group of words will appear on the display afterevery press of the button. Once the complete messagehas been displayed, MSG will disappear from the displayuntil another new message is received. The last messagecan be displayed by pressing the MSG button. You canview the last message until a new message is received ora different station is tuned to.

When a message is not available from a station, NOMESSAGE will appear on the display.

Radio Messages

CALIBRATE: The audio system has been calibrated foryour vehicle from the factory. If CALIBRATE appearson the display, it means that the radio has not beenconfigured properly for your vehicle and it mustbe returned to your GM dealer for service.

LOCKED: This message is displayed when theTHEFTLOCK® system has locked up the radio. Takethe vehicle to your GM dealer for service.


3-59

XM™ Radio MessagesRadio Display

Message Condition Action Required

XL (ExplicitLanguage Channels)

XL on the radio display,after the channel name,indicates content withexplicit language.

These channels, or any others, can be blocked at acustomer’s request, by calling 1-800-852-XMXM (9696).

XM Updating Updatingencryption code

The encryption code in the receiver is being updated, andno action is required. This process should take no longerthan 30 seconds.

No XM Signal Loss of signal The system is functioning correctly, but the vehicle is in alocation that is blocking the XM™ signal. When you moveinto an open area, the signal should return.

Loading XM Acquiring channel audio(after 4 second delay)

The audio system is acquiring and processing audio and textdata. No action is needed. This message should disappearshortly.

Channel Off Air Channel not in service This channel is not currently in service. Tune to anotherchannel.

Channel Unavail Channel nolonger available

This previously assigned channel is no longer assigned.Tune to another station. If this station was one of thepresets, choose another station for that preset button.

No Artist Info Artist Name/Featurenot available

No artist information is available at this time on this channel.The system is working properly.

No Title Info Song/Program Titlenot available

No song title information is available at this time on thischannel. The system is working properly.

3-60

XM™ Radio Messages (cont’d)Radio Display


No CAT Info Category Namenot available

No category information is available at this time on thischannel. The system is working properly.

No Information No Text/Informationalmessage available

No text or informational messages are available at this timeon this channel. The system is working properly.

CAT Not Found No channel available forthe chosen category

There are no channels available for the selected category.The system is working properly.

XM Theft Locked Theft lock active The XM™ receiver in the vehicle may have previously beenin another vehicle. For security purposes, XM™ receiverscannot be swapped between vehicles. If this messageappears after having your vehicle serviced, check withyour GM dealer.

XM Radio ID Radio ID label(channel 0)

If tuned to channel 0, this message will alternate with theXM™ Radio eight digit radio ID label. This label is needed toactivate the service.

Unknown Radio ID not known(should only be ifhardware failure)

If this message is received when tuned to channel 0, theremay be a receiver fault. Consult with your GM dealer.

Check XM Receivr Hardware failure in thereceiver module

If this message does not clear within a short period of time,the receiver may have a fault. Consult with your GM dealer.

Check XM XM not available If this message does not clear within a short period of time,the receiver may have a fault. Consult with your GM dealer.

3-61



If the ignition or radio is turned off with a CD in theplayer, it will stay in the player. When the ignition orradio is turned on the CD will start playing, whereit stopped, if it was the last selected audio source.


If playing a CD-R, the sound quality may be reduceddue to CD-R quality, the method of recording, the qualityof the music that has been recorded, and the way theCD-R has been handled. There may be an increasein skipping, difficulty in finding tracks, and/or difficulty inloading and ejecting. If these problems occur, checkthe bottom surface of the CD. If the surface of the CD isdamaged, such as cracked, broken, or scratched, theCD will not play properly. If the surface of the CD issoiled, see Care of Your CDs on page 3-81 later in thissection.



Notice: If you add any label to a CD, insert morethan one CD into the slot at a time, or attemptto play scratched or damaged CDs, you coulddamage the CD player. When using the CD player,use only CDs in good condition without any label,load one CD at a time, and keep the CD playerand the loading slot free of foreign materials,liquids, and debris.


1r (Reverse): Press and hold this pushbutton toreverse quickly within a track. You will hear sound at areduced volume. Release this pushbutton to play thepassage. The elapsed time of the track will appearon the display.

2[ (Fast Forward): Press and hold this pushbuttonto advance quickly within a track. You will hear soundat a reduced volume. Release this pushbutton to playthe passage. The elapsed time of the track will appearon the display.

3-62

5 y (Random): Press this pushbutton to hear thetracks in random, rather than sequential, order.RANDOM ON will appear on the display.

Turn the ADJ knob, while in random, to take you to theprevious or next track in sequential order.

Press RDM again to turn off random play, RANDOMOFF will appear on the display.

6 N (Repeat): Press this pushbutton once to hear atrack over again. REPEAT ON and the repeat symbolwill appear on the display. The current track will continueto repeat.

Turn the ADJ knob, while in repeat, to take you to theprevious or next track.

Press RPT again to turn off repeat play, REPEAT OFFwill appear on the display.

© SEEK ¨: Press the left arrow to go to the start ofthe current track if it has been playing for more thaneight seconds. Press the right arrow to go to the nexttrack. The track number will appear on the display. Ifeither arrow is pressed more than once, the player willcontinue moving backward or forward through the CD.

If either arrow is held for more then two seconds, theCD will enter CD scan mode and the CD will play thefirst 10 seconds of each track. Press this button againto stop scanning.

DISP (Display): Press this knob to see how long thecurrent track has been playing. TRACK, the tracknumber, and the elapsed time of the track will appearon the display. To change the default on the display,time or elapsed time, press this knob until you see thedisplay you want, then hold the knob for two seconds.The radio will produce one beep and the selecteddisplay will now be the default.

AUTO EQ (Automatic Equalization): Press this buttonto select the desired equalization setting while playinga CD. The equalization will be automatically recalledwhenever a CD is played. For more information,see AUTO EQ listed previously in this section.


SRCE (Source): Press this button to play a CD or toaccess a remote device (if installed) when listeningto the radio.

Z (Eject): Press this button to eject a CD. Eject maybe activated with either the ignition or radio off. CDsmay be loaded with the radio and ignition off if thisbutton is pressed first.

3-63

CD Messages

CHECK DISC: If this message appears on the displayand/or the CD comes out, it could be for one of thefollowing reasons:









Radio with CD (MP3)

Radio Data System (RDS)The audio system has a Radio Data System (RDS).RDS features are available for use only on FM stationsthat broadcast RDS information.

3-64

With RDS, the radio can do the following:

• Seek to stations broadcasting the selected type ofprogramming

• Receive announcements concerning local andnational emergencies

• Display messages from radio stations

This system relies upon receiving specific informationfrom these stations and will only work when theinformation is available. In rare cases, a radio stationmay broadcast incorrect information that will causethe radio features to work improperly. If this happens,contact the radio station.

While the radio is tuned to an RDS station, the stationname or call letters will appear on the display. RDSstations may also provide the time of day, a programtype (PTY) for current programming, and the nameof the program being broadcast.

XM™ Satellite Radio ServiceXM™ is a satellite radio service that is based in the48 contiguous United States and in Canada (ifavailable). XM™ offers over 100 coast-to-coast channelsincluding music, news, sports, talk, and children’sprogramming. XM™ provides digital quality audio andtext information that includes song title and artist name.A service fee is required in order to receive the XM™service. For more information, contact XM™ atwww.xmradio.com or call 1-800-852-XMXM (9696).

Playing the Radio



AUTOu (Automatic Volume): With automaticvolume, the audio system adjusts automatically to makeup for road and wind noise as you drive.

3-65

Set the volume at the desired level. Press this button toselect LOW, MEDIUM, or HIGH. AUTO VOL LOW,AUTO VOL MEDIUM, or AUTO VOL HIGH will appearon the display. Each higher setting will allow formore volume compensation at faster vehicle speeds.Then as you drive, automatic volume increasesthe volume, as necessary, to overcome noise at anyspeed. The volume level should always sound the sameto you as you drive. AUTO VOL NONE will appear onthe display if the radio cannot determine the vehiclespeed or if the engine is not running. To turn automaticvolume off, press this button until AUTO VOL OFFappears on the display.

DISP (Display): When the ignition is off, press thisknob to display the time.

For RDS, press the DISP knob to change what appearson the display. The display options are station name,RDS station frequency, PTY, and the name of theprogram (if available).

For XM™ (if equipped), press the DISP knob while inXM™ mode to retrieve four different categories ofinformation related to the current song or channel:Artist, Song Title, Category or PTY, ChannelNumber/Channel Name.

To change the default on the display, press the DISPknob until you see the display you want, then holdthe knob for two seconds. The radio will produce a beepand the selected display will now be the default.

Finding a StationBAND: Press this button to switch between FM1, FM2,AM, or XM1 or XM2 (if equipped). The display willshow the selection.


© SEEK ¨: Press the right or the left arrow togo to the next or to the previous station and stay there.


To scan preset stations, press and hold either arrowfor more than four seconds until you hear two beeps.The radio will go to the first preset station stored on thepushbuttons, play for a few seconds, then go on tothe next preset station. Press either arrow again to stopscanning presets.


3-66

Setting Preset StationsUp to 30 stations (six FM1, six FM2, and six AM,six XM1 and six XM2 (if equipped)), can be programmedon the six numbered pushbuttons, by performing thefollowing steps:


2. Press BAND to select FM1, FM2, AM, or XM1or XM2.


4. Press AUTO EQ to select the equalization.

5. Press and hold one of the six numberedpushbuttons until you hear a beep. Whenever thatnumbered pushbutton is pressed, the stationthat was set will return and the equalization thatwas selected will be stored for that pushbutton.



EQ (Tone): To adjust the bass or the treble, press andrelease the EQ button until BASS or TREBLE appearson the display. Turn the ADJ knob to increase or todecrease. The display will show the bass or treble level.If a station is weak or noisy, decrease the treble.

To adjust bass or treble to the middle position, selectBASS or TREBLE. Then press and hold the EQ buttonfor more than two seconds. You will hear a beepand the level will be adjusted to the middle position.

To adjust the tone controls to the middle position,first end out of tone by pressing another button, causingthe radio to perform that function, or by waitingfive seconds for the display to return to the defaultdisplay. Then press and hold the EQ button for morethan two seconds until you hear a beep. ALLCENTERED will appear on the display.

AUTO EQ (Automatic Equalization): Press this buttonto select customized equalization settings designedfor country, jazz, talk, pop, rock, and classical.

3-67




To adjust the balance or the fade to the middleposition, select BAL or FADE. Then press and holdthe balance/fade button for more than two seconds.You will hear a beep and the level will be adjusted tothe middle position.

To adjust the speaker controls to the middle position,first end out of balance and fade by pressing anotherbutton, causing the radio to perform that function, or bywaiting five seconds for the display to return to thedefault display. Then press and hold the balance/fadebutton for more than two seconds until you hear a beep.ALL CENTERED will appear on the display.

Finding a Program Type (PTY) Station(RDS and XM™)To select and find a desired PTY perform the following:

1. Press the P-TYPE button to activate programtype select mode. PTY and a program type willappear on the display.

2. Turn the ADJ knob to select a PTY.

3. Once the desired PTY is displayed, press theSEEK left arrow to select the PTY and to takeyou to the PTY’s first station.

4. To go to another station within that PTY press theSEEK left arrow again. If the radio cannot find thedesired PTY, NONE FOUND will appear on thedisplay and the radio will return to the last stationyou were listening to.After 15 seconds of inactivity or if the P-TYPEbutton is pressed again, the radio will exit programtype select mode.

3-68

RDS MessagesALERT!: Alert warns of local or national emergencies.When an alert announcement comes on the currentradio station, ALERT! will appear on the display. You willhear the announcement, even if the volume is low ora CD is playing. If a CD is playing, play will stop duringthe announcement. Alert announcements cannot beturned off.

ALERT! will not be affected by tests of the emergencybroadcast system. This feature is not supported byall RDS stations.

MSG (Message): If the current station has a message,MSG will appear on the display. Press this button tosee the message. The message may display the artist,song title, call in phone numbers, etc.

If the entire message is not displayed, parts of themessage will appear every three seconds. To scrollthrough the message, press and release the MSG button.A new group of words will appear on the display afterevery press of the button. Once the complete messagehas been displayed, MSG will disappear from the displayuntil another new message is received. The last messagecan be displayed by pressing the MSG button. You canview the last message until a new message is received ora different station is tuned to.

When a message is not available from a station, NOMESSAGE will appear on the display.

Radio Messages

CALIBRATE: The audio system has been calibrated foryour vehicle from the factory. If CALIBRATE appearson the display, it means that the radio has not beenconfigured properly for your vehicle and it mustbe returned to your GM dealer for service.

LOCKED: This message is displayed when theTHEFTLOCK® system has locked up the radio. Takethe vehicle to your GM dealer for service.


3-69

XM™ Radio MessagesRadio Display


XL (ExplicitLanguage Channels)

XL on the radio display,after the channel name,indicates content withexplicit language.

These channels, or any others, can be blocked at acustomer’s request, by calling 1-800-852-XMXM (9696).

XM Updating Updatingencryption code

The encryption code in the receiver is being updated, andno action is required. This process should take no longerthan 30 seconds.

No XM Signal Loss of signal The system is functioning correctly, but the vehicle is in alocation that is blocking the XM™ signal. When you moveinto an open area, the signal should return.

Loading XM Acquiring channel audio(after 4 second delay)

The audio system is acquiring and processing audio andtext data. No action is needed. This message shoulddisappear shortly.

Channel Off Air Channel not in service This channel is not currently in service. Tune toanother channel.

Channel Unavail Channel nolonger available

This previously assigned channel is no longer assigned.Tune to another station. If this station was one of thepresets, choose another station for that preset button.

No Artist Info Artist Name/Featurenot available

No artist information is available at this time on this channel.The system is working properly.

No Title Info Song/Program Titlenot available

No song title information is available at this time on thischannel. The system is working properly.

3-70

XM™ Radio Messages (cont’d)Radio Display


No CAT Info Category Namenot available

No category information is available at this time on thischannel. The system is working properly.

No Information No Text/Informationalmessage available

No text or informational messages are available at this timeon this channel. The system is working properly.

CAT Not Found No channel available forthe chosen category

There are no channels available for the selected category.The system is working properly.

XM Theft Locked Theft lock active The XM™ receiver in the vehicle may have previously beenin another vehicle. For security purposes, XM™ receiverscannot be swapped between vehicles. If this messageappears after having your vehicle serviced, check withyour GM dealer.

XM Radio ID Radio ID label(channel 0)

If tuned to channel 0, this message will alternate with theXM™ Radio eight digit radio ID label. This label is needed toactivate the service.

Unknown Radio ID not known(should only be ifhardware failure)

If this message is received when tuned to channel 0, theremay be a receiver fault. Consult with your GM dealer.

Check XM Receivr Hardware failure in thereceiver module

If this message does not clear within a short period of time,the receiver may have a fault. Consult with your GM dealer.

Check XM XM not available If this message does not clear within a short period of time,the receiver may have a fault. Consult with your GM dealer.

3-71



If the ignition or radio is turned off with a CD in theplayer, it will stay in the player. When the ignition orradio is turned on the CD will start playing, whereit stopped, if it was the last selected audio source.


If playing a CD-R, the sound quality may be reduceddue to CD-R quality, the method of recording, the qualityof the music that has been recorded, and the way theCD-R has been handled. There may be an increasein skipping, difficulty in finding tracks, and/or difficulty inloading and ejecting. If these problems occur, checkthe bottom surface of the CD. If the surface of the CD isdamaged, such as cracked, broken, or scratched, theCD will not play properly. If the surface of the CD issoiled, see Care of Your CDs on page 3-81 later in thissection.



Notice: If you add any label to a CD, insert morethan one CD into the slot at a time, or attemptto play scratched or damaged CDs, you coulddamage the CD player. When using the CD player,use only CDs in good condition without any label,load one CD at a time, and keep the CD playerand the loading slot free of foreign materials,liquids, and debris.


1r (Reverse): Press and hold this pushbutton toreverse quickly within a track. The sound will be muted.Release this pushbutton to play the passage. Theelapsed time of the track will appear on the display.

2[ (Fast Forward): Press and hold this pushbuttonto advance quickly within a track. The sound will bemuted. Release this pushbutton to play the passage.The elapsed time of the track will appear on the display.

3-72

5 y (Random): Press this pushbutton to hear thetracks in random, rather than sequential, order.RANDOM ON will appear on the display.

Turn the ADJ knob, while in random, to take you to theprevious or next track in sequential order.

Press RDM again to turn off random play, RANDOMOFF will appear on the display.

6 N (Repeat): Press this pushbutton once to hear atrack over again. REPEAT ON and the repeat symbolwill appear on the display. The current track will continueto repeat.



© SEEK ¨: Press the left arrow to go to the start ofthe current track if it has been playing for more thaneight seconds. Press the right arrow to go to thenext track. The track number will appear on the display.If either arrow is pressed more than once, the playerwill continue moving backward or forward throughthe CD.

If either arrow is held for more then two seconds, theCD will enter CD scan mode and the CD will playthe first 10 seconds of each track. Press this buttonagain to stop scanning.

ADJ (Adjust): Turn this knob to go to the previous ornext track(s). Stop turning this knob to play the track.

DISP (Display): Press this knob to see how longthe current track has been playing. TRACK, the tracknumber, and the elapsed time of the track will appear onthe display. To change the default on the display,time or elapsed time, press this knob until you see thedisplay you want, then hold the knob for two seconds.The radio will produce one beep and the selecteddisplay will now be the default.

MSG (Message): Press this button to display the texton commercially recorded CDs (if available).

AUTO EQ (Automatic Equalization): Press this buttonto select the desired equalization setting while playinga CD. The equalization will be automatically recalledwhenever a CD is played. For more information,see AUTO EQ listed previously in this section.




3-73

Using an MP3 CDMP3 FormatIf you burn your own MP3 disc on a personal computer:

• Make sure the MP3 files are recorded on aCD-R disc.

• Make sure to finalize the disc when burning an MP3disc, using multiple sessions. It is usually better toburn the disc all at once.

• Files can be recorded with a variety of fixed orvariable bit rates. Song title, artist name, and albumwill be available for display by the radio whenrecorded using ID3 tags version 1 and 2.

• Do not mix standard audio and MP3 files onone disc.

• Make sure playlists have a.pls, or.m3u, or.rmpextension, other file extensions may not work.

The player will be able to read and play a maximum of50 folders, 50 playlists, 10 sessions, and 255 files.Long file names, folder names, or playlist names mayuse more disc memory space than necessary. Toconserve space on the disc, minimize the length of thefile, folder or playlist names. You can also play anMP3 CD that was recorded using no file folders.

The system can support up to 11 folders in depth,though, keep the depth of the folders to a minimum inorder to keep down the complexity and confusionin trying to locate a particular folder during playback. If aCD contains more than the maximum of 50 folders,50 playlists, 10 sessions, and 255 files the player will letyou access and navigate up to the maximum, but allitems over the maximum will be ignored.

Root DirectoryThe root directory will be treated as a folder. If the rootdirectory has compressed audio files, the directorywill be displayed as F1 ROOT. All files contained directlyunder the root directory will be accessed prior to anyroot directory folders. However, playlists (Px) will alwaysbe accessed before root folders or files.

Empty Directory or FolderIf a root directory or a folder exists somewhere in thefile structure that contains only folders/subfolders and nocompressed files directly beneath them, the player willadvance to the next folder in the file structure thatcontains compressed audio files and the empty folderwill not be displayed or numbered.

3-74

No FolderWhen the CD contains only compressed files, the fileswill be located under the root folder. The next andprevious folder functions will have no function on aCD that was recorded without folders or playlists.When displaying the name of the folder the radio willdisplay ROOT.

When the CD contains only playlists and compressedaudio files, but no folders, all files will be located underthe root folder. The folder down and the folder upbuttons will search playlists (Px) first and then go to theroot folder. When the radio displays the name of thefolder the radio will display ROOT.

Order of PlayTracks will be played in the following order:

• Play will begin from the first track in the first playlistand will continue sequentially through all tracks ineach playlist. When the last track of the last playlisthas been played, play will continue from the firsttrack of the first folder.

• Play will begin from the first track in the first folderand will continue sequentially through all tracks ineach folder. When the last track of the lastfolder has been played, play will continue from thefirst track of the first playlist.

When play enters a new folder, the display will notautomatically show the new folder name unlessyou have chosen the folder mode as the default display.See DISP later in this section for more information.The new track name will appear on the display.

File System and NamingThe song name that will be displayed will be the songname that is contained in the ID3 tag. If the song nameis not present in the ID3 tag, then the radio willdisplay the file name without the extension (such as.mp3) as the track name.

Track names longer than 32 characters or four pageswill be shortened. The display will not show partsof words on the last page of text and the extension ofthe filename will not be displayed.

Preprogrammed PlaylistsYou can access preprogrammed playlists which werecreated by WinAmp™, MusicMatch™, or RealJukebox™ software, however, you will not have editingcapability. These playlists will be treated as specialfolders containing compressed audio song files.

3-75

Playing an MP3With the ignition on, insert a CD partway into the slot,label side up. The player will pull it in, and READINGDISC will appear on the display. The CD should beginplaying and the CD symbol will appear on the display.If you want to insert a CD with the ignition off, first pressthe eject button or the DISP knob.

If you turn off the ignition or radio with a CD in theplayer it will stay in the player. When you turn on theignition or radio, the CD will start to play where itstopped, if it was the last selected audio source.



If playing a CD-R, the sound quality may be reduced dueto CD-R quality, the method of recording, the quality ofthe music that has been recorded, and the way the CD-Rhas been handled. There may be an increase in skipping,difficulty in finding tracks, and/or difficulty in loading andejecting. If these problems occur, check the bottomsurface of the CD. If the surface of the CD is damaged,such as cracked, broken, or scratched, the CD will notplay properly. If the surface of the CD is soiled, see Careof Your CDs on page 3-81 later in this section.



Notice: If you add any label to a CD, insert morethan one CD into the slot at a time, or attemptto play scratched or damaged CDs, you coulddamage the CD player. When using the CD player,use only CDs in good condition without anylabel, load one CD at a time, and keep the CD playerand the loading slot free of foreign materials,liquids, and debris.


1r (Reverse): Press and hold this pushbutton toreverse quickly within a track. Press and hold thispushbutton for less than two seconds to reverse ateight times the normal playing speed. Releasethis pushbutton to play the track. REV and theelapsed time of the track will appear on the display.

2[ (Fast Forward): Press and hold this pushbuttonto advance quickly within a track. Press and holdthis pushbutton for less than two seconds to advance ateight times the normal playing speed. Release thispushbutton to play the track. FWD and the elapsed timeof the track will appear on the display.

3-76

3 ! (Previous Folder): Press this pushbutton to go tothe first track in the previous folder. Pressing thispushbutton while in folder random mode will take you tothe previous folder and random the tracks in that folder.

4 # (Next Folder): Press this pushbutton to go to thefirst track in the next folder. Pressing this pushbuttonwhile in folder random mode will take you to thenext folder and random the tracks in that folder.

5 y (Random): To random the tracks in the currentfolder or playlist, press and release this pushbutton.Press Random again while FLDR RANDOM ONor PLST RANDOM ON is being displayed and, DISRRANDOM ON will then appear on the display. OnceDISR RANDOM ON is displayed, the radio willplay tracks randomly across entire disc. After all of thetracks in the current folder or playlist have beenplayed, the system will move on to the next folder orplaylist and play all of the tracks in random order.

When in random, pressing and releasing either SEEKarrow will take you to the next or previous random track.

Turn the ADJ knob, while in random, to take you tothe previous or next track in sequential order.

Press and release this pushbutton again to turn offrandom play, RANDOM OFF will appear on the display.

6 N (Repeat): Press this pushbutton once to hear atrack over again. TRACK REPEAT ON or FLDRREPEAT ON and the repeat symbol will appear on thedisplay. The current track will continue to repeat.



© SEEK ¨: Press the left arrow to go to the start ofthe previous track. Press the right arrow to go to thestart of the next track.

To scan tracks, press either arrow for more thantwo seconds to enter CD scan mode. The CD will playthe first 10 seconds of each track. Press either arrowagain to stop scanning.

ADJ (Adjust): Turn this knob to go to the previous ornext track(s). Stop turning this knob to play the track.

DISP (Display): Press this knob to switch betweentrack and name, folder and name, and the elapsed timeof the track. The display will show only eight characters,but there can be up to four pages of text. If there aremore than eight characters in the song, folder, or playlistname, pressing this knob within two seconds will takeyou to the next page of text. If there are no other pagesto be shown, pressing this knob within two secondswill take you to the next display mode.

3-77

To change the default on the display, press the DISPknob until you see the display you want, then holdthis knob for two seconds.

MSG (Message): MSG will appear on the displaywhenever a current track has ID3 tag information. Pressthis button to display the artist name and albumcontained in the tag. MSG will disappear from thedisplay when the information in the ID3 tag has finished.




CD Messages

CHECK DISC: If this message appears on the displayand/or the CD comes out, it could be for one of thefollowing reasons:





• The format of the CD may not be compatible. See“MP3 Format” earlier in this section.





3-78

Theft-Deterrent FeatureTHEFTLOCK® is designed to discourage theft of yourvehicle’s radio. The feature works automatically bylearning a portion of the Vehicle Identification Number(VIN). If the radio is moved to a different vehicle, itwill not operate and LOCK or LOCKED will appear onthe display.

With THEFTLOCK® activated, the radio will not operateif stolen.

Audio Steering Wheel Controls

If your vehicle has this feature, some audio controls canbe adjusted at the steering wheel. They include thefollowing:

x SEEK w: Press the up or the down arrow to go tothe next or to the previous radio station and staythere. The radio will only seek stations with a strongsignal that are in the selected band.

When a CD is playing, press the up or the down arrowto go to the next or previous track.

3-79

BAND: Press this button to switch between FM1, FM2,AM, or XM1 or XM2 (if equipped).

1–6 (Preset Pushbuttons): Press this button to playstations that are programmed on the radio presetpushbuttons. The radio will only seek preset stationswith a strong signal that are in the selected band.

xuw (Volume): Press the up or the down arrowto increase or to decrease the volume.

0 (Mute): Press this button to silence the system.Press this button again, or any other radio button, to turnthe sound on.

Mute is unavailable when OnStar™ (if equipped)is active.

SRCE (Source): Press this button to switch betweenlistening to the radio and a CD. The inactive CDwill remain safely inside the radio for future listening.

Radio ReceptionYou may experience frequency interference and staticduring normal radio reception if items such as cellphonechargers, vehicle convenience accessories, andexternal electronic devices are plugged into theaccessory power outlet. If there is interference or static,unplug the item from the accessory power outlet.

AMThe range for most AM stations is greater than for FM,especially at night. The longer range can causestation frequencies to interfere with each other. Forbetter radio reception, most AM radio stations will boostthe power levels during the day, and then reducethese levels during the night. Static can also occur whenthings like storms and power lines interfere with radioreception. When this happens, try reducing the treble onyour radio.

FM StereoFM stereo will give the best sound, but FM signals willreach only about 10 to 40 miles (16 to 65 km). Tallbuildings or hills can interfere with FM signals, causingthe sound to fade in and out.

XM™ Satellite Radio ServiceXM™ Satellite Radio Service gives digital radioreception from coast-to-coast in the 48 contiguousUnited States, and in Canada (if available). Just as withFM, tall buildings or hills can interfere with satelliteradio signals, causing the sound to fade in and out. Inaddition, traveling or standing under heavy foliage,bridges, garages, or tunnels may cause loss ofXM signal for a period of time. The radio may displayNO XM SIGNAL to indicate interference.

3-80

Care of Your CDsHandle CDs carefully. Store them in their original casesor other protective cases and away from directsunlight and dust. The CD player scans the bottomsurface of the disc. If the surface of a CD is damaged,such as cracked, broken, or scratched, the CD willnot play properly or not at all. If the surface of a CD issoiled, take a soft, lint free cloth or dampen a clean, softcloth in a mild, neutral detergent solution mixed withwater, and clean it. Make sure the wiping process startsfrom the center to the edge.

Do not touch the bottom side of a CD while handling it;this could damage the surface. Pick up CDs bygrasping the outer edges or the edge of the hole andthe outer edge.

Care of the CD PlayerThe use of CD lens cleaners for CD players is notadvised, due to the risk of contaminating the internallens of the CD optics with lubricants.

Fixed Mast AntennaThe fixed mast antenna can withstand most car washeswithout being damaged. If the mast should everbecome slightly bent, straighten it out by hand. If themast is badly bent, replace it.

Check occasionally to make sure the mast is stilltightened to the fender. If tightening is required, tightenby hand, then with a wrench one quarter turn.

XM™ Satellite RadioAntenna SystemThe XM™ Satellite Radio antenna is located on the roofof your vehicle. Keep this antenna clear of snow andice build up for clear radio reception.

If your vehicle has a sunroof, the performance of theXM™ system may be affected if the sunroof is open.

Loading items onto the roof of your vehicle can interferewith the performance of the XM™ system. Make surethe XM™ Satellite Radio antenna is not obstructed.

3-81

✍ NOTES

3-82

Your Driving, the Road, and Your Vehicle ..........4-2Defensive Driving ...........................................4-2Drunken Driving .............................................4-3Control of a Vehicle ........................................4-6Braking .........................................................4-6Anti-Lock Brake System (ABS) .........................4-7Braking in Emergencies ...................................4-9Enhanced Traction System (ETS) .....................4-9Limited-Slip Differential ..................................4-11Steering ......................................................4-11Off-Road Recovery .......................................4-13Passing .......................................................4-14Loss of Control .............................................4-15Racing or Other Competitive Driving ................4-17Driving at Night ............................................4-17Driving in Rain and on Wet Roads ..................4-18

City Driving ..................................................4-20Freeway Driving ...........................................4-21Before Leaving on a Long Trip .......................4-22Highway Hypnosis ........................................4-23Hill and Mountain Roads ................................4-24Winter Driving ..............................................4-26If Your Vehicle is Stuck in Sand, Mud,

Ice or Snow ..............................................4-30Rocking Your Vehicle to Get It Out .................4-31Loading Your Vehicle ....................................4-31

Towing ..........................................................4-36Towing Your Vehicle .....................................4-36Recreational Vehicle Towing ...........................4-36Towing a Trailer (Automatic Transaxle) ............4-39Towing a Trailer (Manual Transaxle) ................4-46

Section 4 Driving Your Vehicle

4-1

Your Driving, the Road, andYour Vehicle

Defensive DrivingThe best advice anyone can give about driving is: Drivedefensively.

Please start with a very important safety device in yourvehicle: Buckle up. See Safety Belts: They Are forEveryone on page 1-9.

{CAUTION:

Defensive driving really means “Be readyfor anything.” On city streets, rural roads,or expressways, it means “Always expect theunexpected.” Assume that pedestrians or otherdrivers are going to be careless and makemistakes. Anticipate what they might do andbe ready. Rear-end collisions are about themost preventable of accidents. Yet they arecommon. Allow enough following distance.Defensive driving requires that a driverconcentrate on the driving task. Anything thatdistracts from the driving task makes properdefensive driving more difficult and can evencause a collision, with resulting injury. Ask apassenger to help do these things, or pull offthe road in a safe place to do them. Thesesimple defensive driving techniques couldsave your life.

4-2

Drunken DrivingDeath and injury associated with drinking and driving isa national tragedy. It is the number one contributorto the highway death toll, claiming thousands of victimsevery year.

Alcohol affects four things that anyone needs to drivea vehicle:

• Judgment

• Muscular Coordination

• Vision

• Attentiveness

Police records show that almost half of all motorvehicle-related deaths involve alcohol. In most cases,these deaths are the result of someone who wasdrinking and driving. In recent years, more than16,000 annual motor vehicle-related deaths have beenassociated with the use of alcohol, with more than300,000 people injured.

Many adults — by some estimates, nearly half the adultpopulation — choose never to drink alcohol, so theynever drive after drinking. For persons under 21, it isagainst the law in every U.S. state to drink alcohol.There are good medical, psychological, anddevelopmental reasons for these laws.

The obvious way to eliminate the leading highwaysafety problem is for people never to drink alcohol andthen drive. But what if people do? How much is “toomuch” if someone plans to drive? It is a lot less thanmany might think. Although it depends on each personand situation, here is some general information onthe problem.

The Blood Alcohol Concentration (BAC) of someonewho is drinking depends upon four things:

• The amount of alcohol consumed

• The drinker’s body weight

• The amount of food that is consumed before andduring drinking

• The length of time it has taken the drinker toconsume the alcohol

4-3

According to the American Medical Association,a 180 lb (82 kg) person who drinks three 12 ounce(355 ml) bottles of beer in an hour will end up with a BACof about 0.06 percent. The person would reach the sameBAC by drinking three 4 ounce (120 ml) glasses of wineor three mixed drinks if each had 1-1/2 ounces (45 ml) ofliquors like whiskey, gin, or vodka.

It is the amount of alcohol that counts. For example, if thesame person drank three double martinis (3 ounces or90 ml of liquor each) within an hour, the person’s

BAC would be close to 0.12 percent. A person whoconsumes food just before or during drinking will havea somewhat lower BAC level.

There is a gender difference, too. Women generallyhave a lower relative percentage of body water thanmen. Since alcohol is carried in body water, this meansthat a woman generally will reach a higher BAC levelthan a man of her same body weight will when each hasthe same number of drinks.

The law in most U.S. states, and throughout Canada,sets the legal limit at 0.08 percent. In some othercountries, the limit is even lower. For example, it is0.05 percent in both France and Germany. TheBAC limit for all commercial drivers in the United Statesis 0.04 percent.

The BAC will be over 0.10 percent after three tosix drinks (in one hour). Of course, as we haveseen, it depends on how much alcohol is in thedrinks, and how quickly the person drinks them.

4-4

But the ability to drive is affected well below a BACof 0.10 percent. Research shows that the driving skillsof many people are impaired at a BAC approaching0.05 percent, and that the effects are worse at night.All drivers are impaired at BAC levels above0.05 percent. Statistics show that the chance of beingin a collision increases sharply for drivers who havea BAC of 0.05 percent or above. A driver with a BAClevel of 0.06 percent has doubled his or her chanceof having a collision. At a BAC level of 0.10 percent,the chance of this driver having a collision is 12 timesgreater; at a level of 0.15 percent, the chance is25 times greater!

The body takes about an hour to rid itself of the alcoholin one drink. No amount of coffee or number of coldshowers will speed that up. “I will be careful” is not theright answer. What if there is an emergency, a needto take sudden action, as when a child darts intothe street? A person with even a moderate BAC mightnot be able to react quickly enough to avoid thecollision.

There is something else about drinking and driving thatmany people do not know. Medical research showsthat alcohol in a person’s system can make crashinjuries worse, especially injuries to the brain, spinalcord, or heart. This means that when anyone who hasbeen drinking — driver or passenger — is in a crash,that person’s chance of being killed or permanentlydisabled is higher than if the person had not beendrinking.

{CAUTION:

Drinking and then driving is very dangerous.Your reflexes, perceptions, attentiveness, andjudgment can be affected by even a smallamount of alcohol. You can have a serious — oreven fatal — collision if you drive after drinking.Please do not drink and drive or ride with adriver who has been drinking. Ride home in acab; or if you are with a group, designate adriver who will not drink.

4-5

Control of a VehicleYou have three systems that make your vehiclego where you want it to go. They are the brakes,the steering, and the accelerator. All three systemshave to do their work at the places where the tiresmeet the road.

Sometimes, as when you are driving on snow or ice,it is easy to ask more of those control systems than thetires and road can provide. That means you can losecontrol of your vehicle. See Enhanced TractionSystem (ETS) on page 4-9.

Adding non-GM accessories can affect your vehicle’sperformance. See Accessories and Modificationson page 5-3.

BrakingSee Brake System Warning Light on page 3-29.

Braking action involves perception time andreaction time.

First, you have to decide to push on the brake pedal.That is perception time. Then you have to bring up yourfoot and do it. That is reaction time.

Average reaction time is about three-fourths of asecond. But that is only an average. It might be lesswith one driver and as long as two or three seconds ormore with another. Age, physical condition, alertness,coordination, and eyesight all play a part. So do alcohol,drugs, and frustration. But even in three-fourths of asecond, a vehicle moving at 60 mph (100 km/h) travels66 feet (20 m). That could be a lot of distance in anemergency, so keeping enough space between yourvehicle and others is important.

4-6

And, of course, actual stopping distances vary greatlywith the surface of the road, whether it is pavementor gravel; the condition of the road, whether it is wet,dry, or icy; tire tread; the condition of your brakes;the weight of the vehicle; and the amount of brakeforce applied.

Avoid needless heavy braking. Some people drivein spurts — heavy acceleration followed by heavybraking — rather than keeping pace with traffic.This is a mistake. Your brakes may not have timeto cool between hard stops. Your brakes will wear outmuch faster if you do a lot of heavy braking. If youkeep pace with the traffic and allow realistic followingdistances, you will eliminate a lot of unnecessarybraking. That means better braking and longerbrake life.

If your engine ever stops while you are driving, brakenormally but do not pump your brakes. If you do,the pedal may get harder to push down. If your enginestops, you will still have some power brake assist.But you will use it when you brake. Once the powerassist is used up, it may take longer to stop and thebrake pedal will be harder to push.Adding non-GM accessories can affect your vehicle’sperformance. See Accessories and Modificationson page 5-3.

Anti-Lock Brake System (ABS)Your vehicle may have anti-lock brakes. ABS is anadvanced electronic braking system that will helpprevent a braking skid.

If your vehicle has anti-lockbrakes, this warning lighton the instrument panel willcome on briefly when youstart your vehicle.

When you start your engine, or when you begin todrive away, your anti-lock brake system will check itself.You may hear a momentary motor or clicking noise whilethis test is going on, and you may even notice that yourbrake pedal moves or pulses a little. This is normal.

4-7

Let us say the road is wet and you are driving safely.Suddenly, an animal jumps out in front of you. You slamon the brakes and continue braking. Here is whathappens with ABS:A computer senses that wheels are slowing down.If one of the wheels is about to stop rolling, the computerwill separately work the brakes at each wheel.The anti-lock system can change the brake pressurefaster than any driver could. The computer isprogrammed to make the most of available tire and roadconditions. This can help you steer around the obstaclewhile braking hard.

As you brake, your computer keeps receiving updateson wheel speed and controls braking pressureaccordingly.

Remember: Anti-lock does not change the time youneed to get your foot up to the brake pedal or alwaysdecrease stopping distance. If you get too close tothe vehicle in front of you, you will not have time to applyyour brakes if that vehicle suddenly slows or stops.Always leave enough room up ahead to stop, eventhough you have anti-lock brakes.

4-8

Using Anti-LockDo not pump the brakes. Just hold the brake pedaldown firmly and let anti-lock work for you. You may feela slight brake pedal pulsation or notice some noise,but this is normal.

Braking in EmergenciesAt some time, nearly every driver gets into a situationthat requires hard braking.

If you have anti-lock brakes, you can steer and brake atthe same time. However, if you do not have anti-lockbrakes, your first reaction — to hit the brake pedal hardand hold it down — may be the wrong thing to do.Your wheels can stop rolling. Once they do, the vehiclecannot respond to your steering. Momentum will carryit in whatever direction it was headed when the wheelsstopped rolling. That could be off the road, into thevery thing you were trying to avoid, or into traffic.

If you do not have anti-lock brakes, use a “squeeze”braking technique. This will give you maximum brakingwhile maintaining steering control. You can do thisby pushing on the brake pedal with steadily increasingpressure.

In an emergency, you will probably want to squeeze thebrakes hard without locking the wheels. If you hear orfeel the wheels sliding, ease off the brake pedal.This will help you retain steering control. If you do haveanti-lock brakes, it is different. See Anti-Lock BrakeSystem (ABS) on page 4-7.

In many emergencies, steering can help you more thaneven the very best braking.

Enhanced Traction System (ETS)Your vehicle may have an Enhanced TractionSystem (ETS) that limits wheel spin. This is especiallyuseful in slippery road conditions. The system operatesonly if it senses that one or both of the front wheelsare spinning or beginning to lose traction. Whenthis happens, the system reduces engine power andmay also upshift the transaxle to limit wheel spin.You may feel or hear the system working, but this isnormal.

A LOW TRACTION message will appear on the DriverInformation Center (DIC) when the traction controlsystem is actively limiting wheel spin. Slippery roadconditions may exist if this message is displayed,so adjust your driving accordingly.

4-9

If your vehicle is in cruise control when the EnhancedTraction System begins to limit wheel spin, the cruisecontrol will automatically disengage. When roadconditions allow you to safely use it again, you mayre-engage the cruise control. See Cruise Controlon page 3-10.

When the system is on,this warning light will comeon to let you know there’sa problem.

If the warning light stays on, or comes on when you’redriving, there may be a problem with your EnhancedTraction System and your vehicle may need service.When this warning light is on, the system will notlimit wheel spin. Adjust your driving accordingly.

The Enhanced Traction System warning light may comeon for the following reasons:

• If you turn the system off by moving the shift leverto FIRST (1), the warning light will come on andstay on. To turn the system back on, move the shiftlever back to a position other than FIRST (1).The warning light should go off.

• The warning light will come on when you set yourparking brake with the engine running, and it willstay on if your parking brake does not release fully.If the transaxle shift lever is in any position otherthan FIRST (1) and the warning light stays on afteryour parking brake is fully released, it meansthere is a problem with the system.

• If the traction control system is affected by anengine related problem, the system will turn off andthe warning light will come on.

If the Enhanced Traction System warning light comeson and stays on for an extended period of time when thetransaxle shift lever is in any position other thanFIRST (1), your vehicle needs service.

Adding non-GM accessories can affect your vehicle’sperformance. See Accessories and Modificationson page 5-3 for more information.

4-10

Limited-Slip DifferentialYour vehicle may have this feature. A limited-sliptransaxle can give you additional traction on snow, mud,ice, sand or gravel. It works like a standard transaxlemost of the time, but when one of the front wheels losestraction, this feature will allow the wheel with tractionto move the vehicle.

SteeringElectric Power SteeringIf the engine stalls while you are driving, the powersteering assist system will continue to operate until youare able to stop your vehicle. If you lose power steeringassist because the electric power steering system is notfunctioning, you can steer, but it will take more effort.If you turn the steering wheel in either direction severaltimes until it stops, or hold the steering wheel in thestopped position for an extended amount of time,you may notice a reduced amount of power steeringassist. The normal amount of power steering assistshould return shortly after a few normal steeringmovements.The electric power steering system does not requireregular maintenance. If you suspect steering systemproblems and/or the POWER STEERING messagecomes on, contact your dealer for service repairs.See DIC Warnings and Messages on page 3-40.

Steering TipsIt is important to take curves at a reasonable speed.

A lot of the “driver lost control” accidents mentioned onthe news happen on curves. Here is why:

Experienced driver or beginner, each of us is subject tothe same laws of physics when driving on curves.The traction of the tires against the road surface makesit possible for the vehicle to change its path when youturn the front wheels. If there is no traction, inertia willkeep the vehicle going in the same direction. If you haveever tried to steer a vehicle on wet ice, you willunderstand this.

The traction you can get in a curve depends on thecondition of your tires and the road surface, the angle atwhich the curve is banked, and your speed. While youare in a curve, speed is the one factor you can control.

Suppose you are steering through a sharp curve.Then you suddenly apply the brakes. Both controlsystems — steering and braking — have to do their workwhere the tires meet the road. Unless you havefour-wheel anti-lock brakes, adding the hard braking candemand too much of those places. You can lose control.

4-11

The same thing can happen if you are steering througha sharp curve and you suddenly accelerate. Thosetwo control systems — steering and acceleration — canoverwhelm those places where the tires meet the roadand make you lose control. See Enhanced TractionSystem (ETS) on page 4-9.

What should you do if this ever happens? Ease up onthe brake or accelerator pedal, steer the vehicle the wayyou want it to go, and slow down.

Speed limit signs near curves warn that you shouldadjust your speed. Of course, the posted speeds arebased on good weather and road conditions. Under lessfavorable conditions you will want to go slower.

If you need to reduce your speed as you approach acurve, do it before you enter the curve, while your frontwheels are straight ahead.

Try to adjust your speed so you can “drive” through thecurve. Maintain a reasonable, steady speed. Wait toaccelerate until you are out of the curve, and thenaccelerate gently into the straightaway.

Adding non-GM accessories can affect your vehicle’sperformance. See Accessories and Modificationson page 5-3.

Steering in EmergenciesThere are times when steering can be more effectivethan braking. For example, you come over a hill and finda truck stopped in your lane, or a car suddenly pullsout from nowhere, or a child darts out from betweenparked cars and stops right in front of you. You canavoid these problems by braking — if you can stop intime. But sometimes you cannot; there is not room.That is the time for evasive action — steering around theproblem.

Your vehicle can perform very well in emergencies likethese. First apply your brakes — but, unless you haveanti-lock brakes, not enough to lock your wheels.

See Braking on page 4-6. It is better to remove as muchspeed as you can from a possible collision. Then steeraround the problem, to the left or right depending on thespace available.

4-12

An emergency like this requires close attention and aquick decision. If you are holding the steering wheel atthe recommended 9 and 3 o’clock positions, you canturn it a full 180 degrees very quickly without removingeither hand. But you have to act fast, steer quickly, andjust as quickly straighten the wheel once you haveavoided the object.

The fact that such emergency situations are alwayspossible is a good reason to practice defensive drivingat all times and wear safety belts properly.

Off-Road RecoveryYou may find that your right wheels have dropped off theedge of a road onto the shoulder while you are driving.

If the level of the shoulder is only slightly below thepavement, recovery should be fairly easy. Ease off theaccelerator and then, if there is nothing in the way,steer so that your vehicle straddles the edge of thepavement. You can turn the steering wheel up toone-quarter turn until the right front tire contacts thepavement edge. Then turn your steering wheel togo straight down the roadway.

4-13

PassingThe driver of a vehicle about to pass another on atwo-lane highway waits for just the right moment,accelerates, moves around the vehicle ahead, thengoes back into the right lane again. A simple maneuver?

Not necessarily! Passing another vehicle on a two-lanehighway is a potentially dangerous move, since thepassing vehicle occupies the same lane as oncomingtraffic for several seconds. A miscalculation, an error injudgment, or a brief surrender to frustration or angercan suddenly put the passing driver face to face with theworst of all traffic accidents — the head-on collision.

So here are some tips for passing:

• Drive ahead. Look down the road, to the sidesand to crossroads for situations that might affectyour passing patterns. If you have any doubtwhatsoever about making a successful pass,wait for a better time.

• Watch for traffic signs, pavement markings andlines. If you can see a sign up ahead that mightindicate a turn or an intersection, delay your pass.A broken center line usually indicates it is allright to pass, providing the road ahead is clear.Never cross a solid line on your side of the laneor a double solid line, even if the road seems emptyof approaching traffic.

• Do not get too close to the vehicle you wantto pass while you are awaiting an opportunity.For one thing, following too closely reduces yourarea of vision, especially if you are following a largervehicle. Also, you will not have adequate space ifthe vehicle ahead suddenly slows or stops.Keep back a reasonable distance.

• When it looks like a chance to pass is coming up,start to accelerate but stay in the right lane and donot get too close. Time your move so you will beincreasing speed as the time comes to move intothe other lane. If the way is clear to pass, you willhave a running start that more than makes upfor the distance you would lose by dropping back.And if something happens to cause you to cancelyour pass, you need only slow down and drop backagain and wait for another opportunity.

• If other vehicles are lined up to pass a slow vehicle,wait your turn. But take care that someone is nottrying to pass you as you pull out to pass the slowvehicle. Remember to glance over your shoulderand check the blind spot.

4-14

• Check your mirrors, glance over your shoulder, andstart your left lane change signal before moving outof the right lane to pass. When you are far enoughahead of the passed vehicle to see its front inyour inside mirror, activate your right lane changesignal and move back into the right lane. Rememberthat your passenger side outside mirror is convex.The vehicle you just passed may seem to befarther away from you than it really is.

• Try not to pass more than one vehicle at a time ontwo-lane roads. Reconsider before passing thenext vehicle.

• Do not overtake a slowly moving vehicle too rapidly.Even though the brake lamps are not flashing,it may be slowing down or starting to turn.

• If you are being passed, make it easy for thefollowing driver to get ahead of you. Perhapsyou can ease a little to the right.

Loss of ControlLet us review what driving experts say about whathappens when the three control systems — brakes,steering, and acceleration — do not have enough frictionwhere the tires meet the road to do what the driverhas asked.

In any emergency, do not give up. Keep trying to steerand constantly seek an escape route or area of lessdanger.

SkiddingIn a skid, a driver can lose control of the vehicle.Defensive drivers avoid most skids by taking reasonablecare suited to existing conditions, and by not overdrivingthose conditions. But skids are always possible.

The three types of skids correspond to yourvehicle’s three control systems. In the braking skid,your wheels are not rolling. In the steering or corneringskid, too much speed or steering in a curve causestires to slip and lose cornering force. And in theacceleration skid, too much throttle causes the drivingwheels to spin.

4-15

A cornering skid is best handled by easing your foot offthe accelerator pedal.

If you have the Enhanced Traction System (ETS),remember: It helps to avoid only the acceleration skid.See Enhanced Traction System (ETS) on page 4-9.If you do not have the Enhanced Traction System,or if the system is off, then an acceleration skid isalso best handled by easing your foot off theaccelerator pedal.

If your vehicle starts to slide, ease your foot off theaccelerator pedal and quickly steer the way you wantthe vehicle to go. If you start steering quickly enough,your vehicle may straighten out. Always be ready for asecond skid if it occurs.

Of course, traction is reduced when water, snow, ice,gravel, or other material is on the road. For safety, youwill want to slow down and adjust your driving to theseconditions. It is important to slow down on slipperysurfaces because stopping distance will be longer andvehicle control more limited.

While driving on a surface with reduced traction,try your best to avoid sudden steering, acceleration,or braking, including engine braking by shifting toa lower gear. Any sudden changes could cause the tiresto slide. You may not realize the surface is slipperyuntil your vehicle is skidding. Learn to recognize warningclues — such as enough water, ice, or packed snowon the road to make a mirrored surface — and slowdown when you have any doubt.

If you have the Anti-Lock Brake System (ABS),remember: It helps avoid only the braking skid. If you donot have ABS, then in a braking skid, where the wheelsare no longer rolling, release enough pressure on thebrakes to get the wheels rolling again. This restoressteering control. Push the brake pedal down steadilywhen you have to stop suddenly. As long as the wheelsare rolling, you will have steering control.

4-16

Racing or Other Competitive DrivingSee your warranty book before using your vehicle forracing or other competitive driving. After reviewing yourwarranty book, please see the GM Performance Partswebsite or catalog and contact the race sanctioningbodies, for example Sports Car Club of America (SCCA)or Grand American, for parts and equipment requiredfor racing or other competitive driving.

Driving at NightNight driving is more dangerous than day driving.One reason is that some drivers are likely to beimpaired — by alcohol or drugs, with night visionproblems, or by fatigue.

Here are some tips on night driving.

• Drive defensively.

• Do not drink and drive.

• Adjust the inside rearview mirror to reduce the glarefrom headlamps behind you.

• Since you cannot see as well, you may need toslow down and keep more space between youand other vehicles.

• Slow down, especially on higher speed roads. Yourvehicle’s headlamps can light up only so much roadahead.

• In remote areas, watch for animals.

• If you are tired, pull off the road in a safe placeand rest.

No one can see as well at night as in the daytime.But as we get older these differences increase.A 50-year-old driver may require at least twice as muchlight to see the same thing at night as a 20-year-old.

What you do in the daytime can also affect your nightvision. For example, if you spend the day in brightsunshine you are wise to wear sunglasses. Your eyeswill have less trouble adjusting to night. But if youare driving, do not wear sunglasses at night. They maycut down on glare from headlamps, but they alsomake a lot of things invisible.

You can be temporarily blinded by approachingheadlamps. It can take a second or two, or even severalseconds, for your eyes to re-adjust to the dark. Whenyou are faced with severe glare, as from a driver whodoes not lower the high beams, or a vehicle withmisaimed headlamps, slow down a little. Avoid staringdirectly into the approaching headlamps.

4-17

Keep the windshield and all the glass on your vehicleclean — inside and out. Glare at night is made muchworse by dirt on the glass. Even the inside of the glasscan build up a film caused by dust. Dirty glass makeslights dazzle and flash more than clean glass would,making the pupils of your eyes contract repeatedly.

Remember that the headlamps light up far less ofa roadway when you are in a turn or curve. Keep youreyes moving; that way, it is easier to pick out dimlylighted objects. Just as the headlamps should bechecked regularly for proper aim, so should your eyesbe examined regularly. Some drivers suffer from nightblindness — the inability to see in dim light — andare not even aware of it.

Driving in Rain and on Wet Roads

Rain and wet roads can mean driving trouble. On a wetroad, you cannot stop, accelerate, or turn as wellbecause your tire-to-road traction is not as good as ondry roads. And, if your tires do not have much treadleft, you will get even less traction. It is always wise togo slower and be cautious if rain starts to fall while youare driving. The surface may get wet suddenly whenyour reflexes are tuned for driving on dry pavement.

4-18

The heavier the rain, the harder it is to see. Even if yourwindshield wiper blades are in good shape, a heavy raincan make it harder to see road signs and traffic signals,pavement markings, the edge of the road, and evenpeople walking.It is wise to keep your windshield wiping equipment ingood shape and keep your windshield washer fluidreservoir filled with washer fluid. Replace yourwindshield wiper inserts when they show signs ofstreaking or missing areas on the windshield, or whenstrips of rubber start to separate from the inserts.

{CAUTION:

Wet brakes can cause accidents. They will notwork as well in a quick stop and may causepulling to one side. You could lose control ofthe vehicle.After driving through a large puddle of wateror a car wash, apply your brake pedal lightlyuntil your brakes work normally.

Driving too fast through large water puddles or evengoing through some car washes can cause problems,too. The water may affect your brakes. Try to avoidpuddles. But if you cannot, try to slow down before youhit them.

HydroplaningHydroplaning is dangerous. So much water can buildup under your tires that they can actually ride onthe water. This can happen if the road is wet enoughand you are going fast enough. When your vehicleis hydroplaning, it has little or no contact with the road.

Hydroplaning does not happen often. But it can ifyour tires do not have much tread or if the pressure inone or more is low. It can happen if a lot of water isstanding on the road. If you can see reflections fromtrees, telephone poles, or other vehicles, and raindropsdimple the water’s surface, there could be hydroplaning.

Hydroplaning usually happens at higher speeds.There just is not a hard and fast rule about hydroplaning.The best advice is to slow down when it is raining.

Driving Through Deep Standing Water

Notice: If you drive too quickly through deeppuddles or standing water, water can come inthrough your engine’s air intake and badly damageyour engine. Never drive through water that isslightly lower than the underbody of your vehicle.If you cannot avoid deep puddles or standing water,drive through them very slowly.

4-19

Driving Through Flowing Water

{CAUTION:

Flowing or rushing water creates strong forces.If you try to drive through flowing water, as youmight at a low water crossing, your vehicle canbe carried away. As little as six inches offlowing water can carry away a smaller vehicle.If this happens, you and other vehicleoccupants could drown. Do not ignore policewarning signs, and otherwise be very cautiousabout trying to drive through flowing water.

Some Other Rainy Weather Tips• Besides slowing down, allow some extra following

distance. And be especially careful when you passanother vehicle. Allow yourself more clear roomahead, and be prepared to have your view restrictedby road spray.

• Have good tires with proper tread depth. See Tireson page 5-54.

City Driving

One of the biggest problems with city streets is theamount of traffic on them. You will want to watch out forwhat the other drivers are doing and pay attention totraffic signals.

4-20

Here are ways to increase your safety in city driving:

• Know the best way to get to where you aregoing. Get a city map and plan your trip intoan unknown part of the city just as you would fora cross-country trip.

• Try to use the freeways that rim and crisscrossmost large cities. You will save time and energy.See Freeway Driving on page 4-21.

• Treat a green light as a warning signal. A trafficlight is there because the corner is busy enoughto need it. When a light turns green, and just beforeyou start to move, check both ways for vehiclesthat have not cleared the intersection or maybe running the red light.

Freeway Driving

Mile for mile, freeways — also called thruways, parkways,expressways, turnpikes, or superhighways — are thesafest of all roads. But they have their own special rules.

The most important advice on freeway driving is: Keepup with traffic and keep to the right. Drive at the samespeed most of the other drivers are driving. Too-fastor too-slow driving breaks a smooth traffic flow. Treat theleft lane on a freeway as a passing lane.

4-21

At the entrance, there is usually a ramp that leads tothe freeway. If you have a clear view of the freeway asyou drive along the entrance ramp, you should beginto check traffic. Try to determine where you expect toblend with the flow. Try to merge into the gap at close tothe prevailing speed. Switch on your turn signal, checkyour mirrors, and glance over your shoulder as oftenas necessary. Try to blend smoothly with the traffic flow.

Once you are on the freeway, adjust your speed tothe posted limit or to the prevailing rate if it is slower.Stay in the right lane unless you want to pass.

Before changing lanes, check your mirrors. Then useyour turn signal.

Just before you leave the lane, glance quickly over yourshoulder to make sure there is not another vehicle inyour blind spot.

Once you are moving on the freeway, make certain youallow a reasonable following distance.

Expect to move slightly slower at night.

When you want to leave the freeway, move to theproper lane well in advance. If you miss your exit,do not, under any circumstances, stop and back up.Drive on to the next exit.

The exit ramp can be curved, sometimes quite sharply.The exit speed is usually posted. Reduce your speedaccording to your speedometer, not to your sense ofmotion. After driving for any distance at higher speeds,you may tend to think you are going slower than youactually are.

Before Leaving on a Long TripMake sure you are ready. Try to be well rested. If youmust start when you are not fresh — such as aftera day’s work — do not plan to make too many miles thatfirst part of the journey. Wear comfortable clothing andshoes you can easily drive in.

Is your vehicle ready for a long trip? If you keep itserviced and maintained, it is ready to go. If it needsservice, have it done before starting out. Of course,you will find experienced and able service experts inGM dealerships all across North America. They will beready and willing to help if you need it.

4-22

Here are some things you can check before a trip:

• Windshield Washer Fluid: Is the reservoir full? Areall windows clean inside and outside?

• Wiper Blades: Are they in good shape?

• Fuel, Engine Oil, Other Fluids: Have you checkedall levels?

• Lamps: Are they all working? Are the lenses clean?

• Tires: They are vitally important to a safe,trouble-free trip. Is the tread good enough forlong-distance driving? Are the tires all inflated to therecommended pressure?

• Weather Forecasts: What is the weather outlookalong your route? Should you delay your trip ashort time to avoid a major storm system?

• Maps: Do you have up-to-date maps?

Highway HypnosisIs there actually such a condition as highway hypnosis?Or is it just plain falling asleep at the wheel? Call ithighway hypnosis, lack of awareness, or whatever.

There is something about an easy stretch of road withthe same scenery, along with the hum of the tires on theroad, the drone of the engine, and the rush of the windagainst the vehicle that can make you sleepy. Do notlet it happen to you! If it does, your vehicle can leave theroad in less than a second, and you could crash andbe injured.

What can you do about highway hypnosis? First,be aware that it can happen.

Then here are some tips:

• Make sure your vehicle is well ventilated, with acomfortably cool interior.

• Keep your eyes moving. Scan the road ahead andto the sides. Check your rearview mirrors and yourinstruments frequently.

• If you get sleepy, pull off the road into a rest,service, or parking area and take a nap, get someexercise, or both. For safety, treat drowsiness onthe highway as an emergency.

4-23

Hill and Mountain Roads

Driving on steep hills or mountains is different fromdriving in flat or rolling terrain.

If you drive regularly in steep country, or if you areplanning to visit there, here are some tips that can makeyour trips safer and more enjoyable.

• Keep your vehicle in good shape. Check all fluidlevels and also the brakes, tires, cooling system,and transaxle. These parts can work hard onmountain roads.

{CAUTION:

If you do not shift down, your brakes could getso hot that they would not work well. Youwould then have poor braking or even nonegoing down a hill. You could crash. Shift downto let your engine assist your brakes on asteep downhill slope.

4-24

{CAUTION:

Coasting downhill in NEUTRAL (N) or with theignition off is dangerous. Your brakes will haveto do all the work of slowing down. They couldget so hot that they would not work well.You would then have poor braking or evennone going down a hill. You could crash.Always have your engine running and yourvehicle in gear when you go downhill.

• Know how to go down hills. The most importantthing to know is this: let your engine do some ofthe slowing down. Shift to a lower gear when you godown a steep or long hill.

• Know how to go uphill. You may want to shift downto a lower gear. The lower gears help cool yourengine and transaxle, and you can climb thehill better.

• Stay in your own lane when driving on two-laneroads in hills or mountains. Do not swing wide orcut across the center of the road. Drive at speedsthat let you stay in your own lane.

• As you go over the top of a hill, be alert. Therecould be something in your lane, like a stalled car oran accident.

• You may see highway signs on mountains thatwarn of special problems. Examples are longgrades, passing or no-passing zones, a falling rocksarea, or winding roads. Be alert to these and takeappropriate action.

4-25

Winter Driving

Here are some tips for winter driving:

• Have your vehicle in good shape for winter.

• You may want to put winter emergency supplies inyour vehicle.

Also see Tires on page 5-54.

Include an ice scraper, a small brush or broom,a supply of windshield washer fluid, a rag, some winterouter clothing, a small shovel, a flashlight, a red cloth,and a couple of reflective warning triangles. And, if youwill be driving under severe conditions, include asmall bag of sand, a piece of old carpet, or a coupleof burlap bags to help provide traction. Be sureyou properly secure these items in your vehicle.

Driving on Snow or IceMost of the time, those places where the tires meet theroad probably have good traction.

However, if there is snow or ice between the tires andthe road, you can have a very slippery situation. You willhave a lot less traction, or grip, and will need to bevery careful.

4-26

What is the worst time for this? Wet ice. Very cold snowor ice can be slick and hard to drive on. But wet ice canbe even more trouble because it may offer the leasttraction of all. You can get wet ice when it is aboutfreezing, 32°F (0°C), and freezing rain begins to fall.Try to avoid driving on wet ice until salt and sand crewscan get there.

Whatever the condition — smooth ice, packed, blowing,or loose snow — drive with caution.

If you have the Enhanced Traction System (ETS), keepthe transaxle shift lever in AUTOMATIC OVERDRIVE (D)so the system will be able to improve your ability toaccelerate when driving on a slippery road. Even thoughyour vehicle has this system, you will want to slow downand adjust your driving to the road conditions. Undercertain conditions, you may want to turn the tractionsystem off, such as when driving through deep snowand loose gravel, to help maintain vehicle motion at lowerspeeds. See Enhanced Traction System (ETS) onpage 4-9.

If you do not have ETS, accelerate gently. Try not tobreak the fragile traction. If you accelerate too fast,the drive wheels will spin and polish the surface underthe tires even more.

Unless you have the Anti-Lock Brake System (ABS),you will want to brake very gently, too. If you dohave ABS, see Anti-Lock Brake System (ABS) onpage 4-7. This system improves your vehicle’s stabilitywhen you make a hard stop on a slippery road.Whether you have ABS or not, you will want to beginstopping sooner than you would on dry pavement.Without ABS, if you feel your vehicle begin to slide,let up on the brakes a little. Push the brake pedal downsteadily to get the most traction you can.

4-27

Remember, unless you have ABS, if you brake so hardthat your wheels stop rolling, you will just slide. Brakeso your wheels always keep rolling and you canstill steer.

• Whatever your braking system, allow greaterfollowing distance on any slippery road.

• Watch for slippery spots. The road might befine until you hit a spot that is covered with ice.On an otherwise clear road, ice patches mayappear in shaded areas where the sun cannotreach, such as around clumps of trees, behindbuildings, or under bridges. Sometimes the surfaceof a curve or an overpass may remain icy whenthe surrounding roads are clear. If you see a patchof ice ahead of you, brake before you are on it.Try not to brake while you are actually on the ice,and avoid sudden steering maneuvers.

If You Are Caught in a BlizzardIf you are stopped by heavy snow, you could be in aserious situation. You should probably stay with yourvehicle unless you know for sure that you are near helpand you can hike through the snow. Here are somethings to do to summon help and keep yourself and yourpassengers safe:

• Turn on your hazard flashers.

• Tie a red cloth to your vehicle to alert police thatyou have been stopped by the snow.

• Put on extra clothing or wrap a blanket around you.If you do not have blankets or extra clothing, makebody insulators from newspapers, burlap bags,rags, floor mats — anything you can wrap aroundyourself or tuck under your clothing to keep warm.

4-28

You can run the engine to keep warm, but be careful.

{CAUTION:

Snow can trap exhaust gases under yourvehicle. This can cause deadly CO (carbonmonoxide) gas to get inside. CO couldovercome you and kill you. You cannot see itor smell it, so you might not know it is in yourvehicle. Clear away snow from around thebase of your vehicle, especially any that isblocking your exhaust pipe. And check aroundagain from time to time to be sure snow doesnot collect there.

Open a window just a little on the side of thevehicle that is away from the wind. This willhelp keep CO out.

4-29

Run your engine only as long as you must. This savesfuel. When you run the engine, make it go a little fasterthan just idle. That is, push the accelerator slightly.This uses less fuel for the heat that you get and it keepsthe battery charged. You will need a well-chargedbattery to restart the vehicle, and possibly for signalinglater on with your headlamps. Let the heater run fora while.

Then, shut the engine off and close the window almostall the way to preserve the heat. Start the engine againand repeat this only when you feel really uncomfortablefrom the cold. But do it as little as possible. Preservethe fuel as long as you can. To help keep warm, you canget out of the vehicle and do some fairly vigorousexercises every half hour or so until help comes.

If Your Vehicle is Stuck in Sand,Mud, Ice or SnowIn order to free your vehicle when it is stuck, you willneed to spin the wheels, but you do not want to spinyour wheels too fast. The method known as rocking canhelp you get out when you are stuck, but you mustuse caution.

{CAUTION:

If you let your tires spin at high speed, they canexplode, and you or others could be injured.And, the transaxle or other parts of the vehiclecan overheat. That could cause an enginecompartment fire or other damage. When youare stuck, spin the wheels as little as possible.Do not spin the wheels above 35 mph (55 km/h)as shown on the speedometer.

Notice: Spinning your wheels can destroy parts ofyour vehicle as well as the tires. If you spin thewheels too fast while shifting your transaxle backand forth, you can destroy your transaxle. SeeRocking Your Vehicle to Get It Out on page 4-31.

For information about using tire chains on your vehicle,see Tire Chains on page 5-70.

4-30

Rocking Your Vehicle to Get It OutFirst, turn your steering wheel left and right. That willclear the area around your front wheels. Then shift backand forth between REVERSE (R) and a forward gear,or with a manual transaxle, between FIRST (1) orSECOND (2) and REVERSE (R), spinning the wheelsas little as possible. Release the accelerator pedal whileyou shift, and press lightly on the accelerator pedalwhen the transaxle is in gear. By slowly spinning yourwheels in the forward and reverse directions, youwill cause a rocking motion that may free your vehicle.If that does not get you out after a few tries, you mayneed to be towed out. If you do need to be towed out,see Towing Your Vehicle on page 4-36.

Loading Your VehicleIt is very important to know how much weight yourvehicle can carry. This weight is called the vehiclecapacity weight and includes the weight of all occupants,cargo and all nonfactory-installed options. Two labelson your vehicle show how much weight it may properlycarry, the Tire and Loading Information label and theCertification label.

{CAUTION:

Do not load your vehicle any heavier than theGross Vehicle Weight Rating (GVWR), or eitherthe maximum front or rear Gross Axle WeightRating (GAWR). If you do, parts on yourvehicle can break, and it can change the wayyour vehicle handles. These could cause youto lose control and crash. Also, overloadingcan shorten the life of your vehicle.

4-31

Tire and Loading Information Label

A vehicle specific Tire and Loading Information label isattached to the vehicle’s center pillar (B-pillar). Withthe driver’s door open, you will find the label eitherattached above the door lock post for a two door vehicleor below the door lock post for a four door vehicle.The tire and loading information label shows the numberof occupant seating positions (A), and the maximumvehicle capacity weight (B) in kilograms and pounds.

The Tire and Loading Information label also shows thetire size of the original equipment tires (C) and therecommended cold tire inflation pressures (D). For moreinformation on tires and inflation see Tires on page 5-54and Inflation - Tire Pressure on page 5-61.

There is also important loading information on theCertification label. It tells you the Gross VehicleWeight Rating (GVWR) and the Gross Axle WeightRating (GAWR) for the front and rear axle; see“Certification Label” later in this section.

Steps for Determining Correct Load Limit1. Locate the statement “The combined weight

of occupants and cargo should never exceedXXX kg or XXX lbs” on your vehicle placard.

2. Determine the combined weight of the driver andpassengers that will be riding in your vehicle.

3. Subtract the combined weight of the driver andpassengers from XXX kg or XXX lbs.

4. The resulting figure equals the available amountof cargo and luggage load capacity. For example,if the “XXX” amount equals 1400 lbs and therewill be five 150 lb passengers in your vehicle, theamount of available cargo and luggage loadcapacity is 650 lbs (1400 − 750 (5 x 150) = 650 lbs).

Label Example

4-32

5. Determine the combined weight of luggage andcargo being loaded on the vehicle. That weightmay not safely exceed the available cargo andluggage load capacity calculated in Step 4.

6. If your vehicle will be towing a trailer, the load fromyour trailer will be transferred to your vehicle.Consult this manual to determine how this reducesthe available cargo and luggage load capacity ofyour vehicle.If your vehicle can tow a trailer, see Towing aTrailer (Automatic Transaxle) on page 4-39 orTowing a Trailer (Manual Transaxle) on page 4-46for important information on towing a trailer,towing safety rules, and trailering tips.

Item Description Total

A Vehicle Capacity Weightfor Example 1 = 1,000 lbs (453 kg)

BSubtract OccupantWeight 150 lbs(68 kg) × 2 =

300 lbs (136 kg)

C Available Occupant andCargo Weight = 700 lbs (317 kg)

Example 1

4-33




750 lbs (340 kg)

C Available CargoWeight = 250 lbs (113 kg)




1,000 lbs (453 kg)

C Available CargoWeight = 0 lbs (0 kg)

Refer to your vehicle’s Tire and Loading Informationlabel for specific information about your vehicle’scapacity weight and seating positions. The combinedweight of the driver, passengers, and cargo shouldnever exceed your vehicle’s capacity weight.

Example 2 Example 3

4-34

Certification Label

A vehicle specific Certification label, found on the rearedge of the driver’s door, tells you the gross weightcapacity of your vehicle, called the Gross Vehicle WeightRating (GVWR). The GVWR includes the weight ofthe vehicle, all occupants, fuel, and cargo. Never exceedthe GVWR for your vehicle, or the Gross Axle WeightRating (GAWR) for either the front or rear axle.

And, if you do have a heavy load, you should spread itout. Do not carry more than 141 lbs (64 kg) in yourvehicle’s trunk. See “Steps for Determining Correct LoadLimit” earlier in this section.

{CAUTION:

Do not load your vehicle any heavier than theGross Vehicle Weight Rating (GVWR), or eitherthe maximum front or rear Gross Axle WeightRating (GAWR). If you do, parts on yourvehicle can break, and it can change the wayyour vehicle handles. These could cause youto lose control and crash. Also, overloadingcan shorten the life of your vehicle.

4-35

If you put things inside your vehicle — like suitcases,tools, packages, or anything else — they will go as fastas the vehicle goes. If you have to stop or turn quickly,or if there is a crash, they will keep going.

{CAUTION:

Things you put inside your vehicle can strikeand injure people in a sudden stop or turn, orin a crash.

• Put things in the trunk of your vehicle. In atrunk, put them as far forward as you can.Try to spread the weight evenly.

• Never stack heavier things, like suitcases,inside the vehicle so that some of themare above the tops of the seats.

• Do not leave an unsecured child restraintin your vehicle.

• When you carry something inside thevehicle, secure it whenever you can.

• Do not leave a seat folded down unlessyou need to.

Towing

Towing Your VehicleConsult your dealer or a professional towing serviceif you need to have your disabled vehicle towed.See Roadside Assistance Program on page 7-7.

If you want to tow your vehicle behind another vehiclefor recreational purposes (such as behind a motorhome),see “Recreational Vehicle Towing” following.

Recreational Vehicle TowingRecreational vehicle towing means towing your vehiclebehind another vehicle — such as behind a motorhome.The two most common types of recreational vehicletowing are known as “dinghy towing” (towing yourvehicle with all four wheels on the ground) and “dollytowing” (towing your vehicle with two wheels onthe ground and two wheels up on a device knownas a “dolly”).

4-36

With the proper preparation and equipment, manyvehicles can be towed in these ways. See “DinghyTowing” and “Dolly Towing,” following.

Here are some important things to consider before youdo recreational vehicle towing:

• What is the towing capacity of the towing vehicle?Be sure you read the tow vehicle manufacturer’srecommendations.

• How far will you tow? Some vehicles haverestrictions on how far and how long they can tow.

• Do you have the proper towing equipment?See your dealer or trailering professional foradditional advice and equipment recommendations.

• Is your vehicle ready to be towed? Just asyou would prepare your vehicle for a long trip,you will want to make sure your vehicle is preparedto be towed. See Before Leaving on a Long Tripon page 4-22.

Dinghy TowingYou may dinghy tow your vehicle from the front followingthese steps:

1. Set the parking brake.2. Turn the ignition key to ACC to unlock the

steering wheel.3. Shift your transaxle to NEUTRAL (N).4. Release the parking brake.

To prevent the battery from draining while the vehicle isbeing towed, remove the following fuse from the floorconsole fuse block: 8 (Ignition Switch, PASS-Key® III+).See Floor Console Fuse Block on page 5-94 formore information.

4-37

Remember to reinstall the fuse once you have reachedyour destination.

Notice: If you exceed 65 mph (105 km/h) whiletowing your vehicle, it could be damaged. Neverexceed 65 mph (105 km/h) while towing your vehicle.

Notice: Towing your vehicle from the rear coulddamage it. Also, repairs would not be covered bythe warranty. Never have your vehicle towedfrom the rear.

Dolly TowingYour vehicle cannot be dolly towed, but can be dinghytowed. See “Dinghy Towing” earlier in this section.

Notice: Dinghy towing your vehicle may causedamage because of reduced ground clearance.Always tow your vehicle using the dinghy towingprocedure listed in this section or put your vehicleon a flatbed truck.

4-38

Towing a Trailer(Automatic Transaxle)

{CAUTION:

If you do not use the correct equipment anddrive properly, you can lose control when youpull a trailer. For example, if the trailer is tooheavy, the brakes may not work well — or evenat all. You and your passengers could beseriously injured. You may also damage yourvehicle; the resulting repairs would not becovered by your warranty. Pull a trailer only ifyou have followed all the steps in this section.Ask your dealer for advice and informationabout towing a trailer with your vehicle.

Your vehicle can tow a trailer if it is equipped with theproper trailer towing equipment. If your vehicle isnot equipped as stated above, do not tow a trailer.

To identify the trailering capacity of your vehicle, youshould read the information in “Weight of the Trailer” thatappears later in this section. Trailering is different thanjust driving your vehicle by itself. Trailering meanschanges in handling, acceleration, braking, durabilityand fuel economy. Successful, safe trailering takescorrect equipment, and it has to be used properly.

That is the reason for this part. In it are manytime-tested, important trailering tips and safety rules.Many of these are important for your safety and that ofyour passengers. So please read this section carefullybefore you pull a trailer.

Load-pulling components such as the engine, transaxle,wheel assemblies and tires are forced to work harderagainst the drag of the added weight. The engine isrequired to operate at relatively higher speeds and undergreater loads, generating extra heat. Also, the traileradds considerably to wind resistance, increasing thepulling requirements.

4-39

If You Do Decide To Pull A TrailerIf you do, here are some important points:

• There are many different laws, including speed limitrestrictions, having to do with trailering. Make sureyour rig will be legal, not only where you live butalso where you will be driving. A good source forthis information can be state or provincial police.

• Consider using a sway control. You can ask a hitchdealer about sway controls.

• Do not tow a trailer at all during the first 1,000 miles(1 600 km) your new vehicle is driven. Your engine,axle or other parts could be damaged.

• Then, during the first 500 miles (800 km) that youtow a trailer, do not drive over 50 mph (80 km/h)and do not make starts at full throttle. This helpsyour engine and other parts of your vehicle wear inat the heavier loads.

• Obey speed limit restrictions when towing a trailer.Do not drive faster than the maximum posted speedfor trailers, or no more than 55 mph (90 km/h),to save wear on your vehicle’s parts.

• Do not tow when the outside air temperature isabove 100°F (38°C).

• Do not tow more than 1,000 miles (1 600 km)per year.

Three important considerations have to do with weight:

• The weight of the trailer

• The weight of the trailer tongue

• The total weight on your vehicle’s tires

Weight of the TrailerHow heavy can a trailer safely be?

It should never weigh more than 1,000 lbs (450 kg).But even that can be too heavy.

It depends on how you plan to use your rig.For example, speed, altitude, road grades, outsidetemperature and how much your vehicle is used to pulla trailer are all important. It can also depend on anyspecial equipment that you have on your vehicle, andthe amount of tongue weight the vehicle can carry.See “Weight of the Trailer Tongue” later in this sectionfor more information.

Maximum trailer weight is calculated assuming only thedriver is in the tow vehicle and it has all the requiredtrailering equipment. The weight of additional optionalequipment, passengers and cargo must be subtractedfrom the maximum trailer weight.

4-40

You can ask your dealer for our trailering information oradvice, or you can write us at:

Chevrolet Motor DivisionCustomer Assistance CenterP.O. Box 33170Detroit, MI 48232-5170

In Canada write to:

General Motors of Canada LimitedCustomer Communication Centre, 163-0051908 Colonel Sam DriveOshawa, Ontario, L1H 8P7

Weight of the Trailer TongueThe tongue load (A) of any trailer is an important weightto measure because it affects the total or gross weightof your vehicle. The Gross Vehicle Weight (GVW)includes the curb weight of the vehicle, any cargo youmay carry in it, and the people who will be riding inthe vehicle. If you have a lot of options, equipment,passengers, or cargo in your vehicle, it will reduce thetongue weight your vehicle can carry, which will alsoreduce the trailer weight your vehicle can tow. And if youtow a trailer, you must add the tongue load to the GVWbecause your vehicle will be carrying that weight, too.See Loading Your Vehicle on page 4-31 for moreinformation about your vehicle’s maximum load capacity.

If you are using a weight-carrying hitch, the trailertongue (A) should weigh 10 to 15 percent of the totalloaded trailer weight (B).

After you have loaded your trailer, weigh the trailer andthen the tongue, separately, to see if the weights areproper. If they are not, you may be able to get them rightsimply by moving some items around in the trailer.

Total Weight on Your Vehicle’s TiresBe sure your vehicle’s tires are inflated to the upper limitfor cold tires. You will find these numbers on theTire-Loading Information label. See Loading YourVehicle on page 4-31. Then be sure you do not go overthe GVW limit for your vehicle, including the weight ofthe trailer tongue.

4-41

HitchesIt is important to have the correct hitch equipment.Crosswinds, large trucks going by and rough roads area few reasons why you will need the right hitch. Hereare some rules to follow:

• The rear bumper on your vehicle is not intendedfor hitches. Do not attach rental hitches orother bumper-type hitches to it. Use only aframe-mounted hitch that does not attach to thebumper.

• Will you have to make any holes in the body ofyour vehicle when you install a trailer hitch?If you do, then be sure to seal the holes later whenyou remove the hitch. If you do not seal them,deadly carbon monoxide (CO) from your exhaustcan get into your vehicle. See Engine Exhauston page 2-31. Dirt and water can also enterthe vehicle.

Safety ChainsYou should always attach chains between your vehicleand your trailer. Cross the safety chains under thetongue of the trailer so that the tongue will not drop tothe road if it becomes separated from the hitch.Instructions about safety chains may be provided by thehitch manufacturer or by the trailer manufacturer.Follow the manufacturer’s recommendation for attachingsafety chains and do not attach them to the bumper.Always leave just enough slack so you can turnwith your rig. And, never allow safety chains to drag onthe ground.

Trailer BrakesDoes your trailer have its own brakes? Be sure to readand follow the instructions for the trailer brakes soyou will be able to install, adjust and maintain themproperly. Do not try to tap into your vehicle’s brakesystem. If you do, both brake systems will not work well,or at all.

4-42

Driving with a TrailerTowing a trailer requires a certain amount of experience.Before setting out for the open road, you will want toget to know your rig. Acquaint yourself with the feel ofhandling and braking with the added weight of the trailer.And always keep in mind that the vehicle you aredriving is now a good deal longer and not nearly asresponsive as your vehicle is by itself.

Before you start, check all trailer hitch parts andattachments, safety chains, electrical connector, lamps,tires and mirror adjustment. If the trailer has electricbrakes, start your vehicle and trailer moving and thenapply the trailer brake controller by hand to be surethe brakes are working. This lets you check yourelectrical connection at the same time.

During your trip, check occasionally to be sure that theload is secure, and that the lamps and any trailerbrakes are still working.

Following DistanceStay at least twice as far behind the vehicle ahead asyou would when driving your vehicle without a trailer.This can help you avoid situations that require heavybraking and sudden turns.

PassingYou will need more passing distance up ahead whenyou are towing a trailer. And, because the vehicleis a good deal longer, you will need to go much fartherbeyond the passed vehicle before you can return toyour lane.

Backing UpHold the bottom of the steering wheel with one hand.Then, to move the trailer to the left, just move that handto the left. To move the trailer to the right, move yourhand to the right. Always back up slowly and, if possible,have someone guide you.

4-43

Making Turns

Notice: Making very sharp turns while traileringcould cause the trailer to come in contact with thevehicle. Your vehicle could be damaged. Avoidmaking very sharp turns while trailering.

When you are turning with a trailer, make wider turnsthan normal. Do this so your trailer will not strike softshoulders, curbs, road signs, trees or other objects.Avoid jerky or sudden maneuvers. Signal well inadvance.

Turn Signals When Towing a TrailerWhen you tow a trailer, your vehicle may need adifferent turn signal flasher and/or extra wiring. Checkwith your dealer. The arrows on your instrumentpanel will flash whenever you signal a turn or lanechange. Properly hooked up, the trailer lamps will alsoflash, telling other drivers you are about to turn,change lanes or stop.

When towing a trailer, the arrows on your instrumentpanel will flash for turns even if the bulbs on the trailerare burned out. Thus, you may think drivers behindyou are seeing your signal when they are not. It isimportant to check occasionally to be sure the trailerbulbs are still working.

Driving on Grades

Notice: Do not tow on steep continuous gradesexceeding 6 miles (9.6 km). Extended, higher thannormal engine and transaxle temperatures mayresult and damage your vehicle. Frequent stops arevery important to allow the engine and transaxleto cool.

Reduce speed and shift to a lower gear before you startdown a long or steep downgrade. If you do not shiftdown, you might have to use your brakes so much thatthey would get hot and no longer work well.

Pay attention to the engine coolant gage. If the indicatoris in the red area, turn off the air conditioning to reduceengine load. See Engine Overheating on page 5-29.

4-44

Parking on Hills

{CAUTION:

You really should not park your vehicle, with atrailer attached, on a hill. If something goeswrong, your rig could start to move. Peoplecan be injured, and both your vehicle and thetrailer can be damaged.

But if you ever have to park your rig on a hill, here ishow to do it:

1. Apply your regular brakes, but do not shift intoPARK (P) for an automatic transaxle, or intogear for a manual transaxle. When parking uphill,turn your wheels away from the curb. When parkingdownhill, turn your wheels into the curb.

2. Have someone place chocks under thetrailer wheels.

3. When the wheel chocks are in place, release theregular brakes until the chocks absorb the load.

4. Reapply the regular brakes. Then apply yourparking brake, and then shift into PARK (P) foran automatic transaxle or REVERSE (R) fora manual transaxle.

5. Release the regular brakes.

When You Are Ready to Leave AfterParking on a Hill

1. Apply your regular brakes and hold the pedal downwhile you:

• Start your engine.

• Shift into a gear.

• Release the parking brake.

2. Let up on the brake pedal.

3. Drive slowly until the trailer is clear of the chocks.

4. Stop and have someone pick up and storethe chocks.

4-45

Maintenance When Trailer TowingYour vehicle will need service more often when you arepulling a trailer. See Scheduled Maintenance onpage 6-4 for more on this. Things that are especiallyimportant in trailer operation are transaxle fluid (do notoverfill), engine oil, drive belt, cooling system andbrake system.

Each of these is covered in this manual, and the Indexwill help you find them quickly. If you are trailering,it is a good idea to review this information before youstart your trip.

Check periodically to see that all hitch nuts and boltsare tight.

Engine Cooling When Trailer TowingYour cooling system may temporarily overheat duringsevere operating conditions. See Engine Overheating onpage 5-29.

Towing a Trailer (Manual Transaxle)Do not tow a trailer if your vehicle is equipped with amanual transaxle. If you have the Cobalt SS, you cantow a trailer. See “Towing a Trailer” in the Index for moreinformation.

4-46

Service ............................................................5-3Accessories and Modifications ..........................5-3California Proposition 65 Warning .....................5-3Doing Your Own Service Work .........................5-4Adding Equipment to the Outside of Your Vehicle ...5-5

Fuel ................................................................5-5Gasoline Octane ............................................5-5Gasoline Specifications ....................................5-6California Fuel ...............................................5-6Additives .......................................................5-6Fuels in Foreign Countries ...............................5-7Filling the Tank ..............................................5-8Filling a Portable Fuel Container .....................5-10

Checking Things Under the Hood ....................5-10Hood Release ..............................................5-11Engine Compartment Overview .......................5-12Engine Oil ...................................................5-15Engine Oil Life System ..................................5-20Engine Air Cleaner/Filter ................................5-21Automatic Transaxle Fluid ..............................5-23Manual Transaxle Fluid ..................................5-23

Hydraulic Clutch ...........................................5-23Engine Coolant .............................................5-23Coolant Surge Tank Pressure Cap ..................5-29Engine Overheating .......................................5-29Cooling System ............................................5-31Windshield Washer Fluid ................................5-35Brakes ........................................................5-36Battery ........................................................5-39Jump Starting ...............................................5-40

Headlamp Aiming ...........................................5-44Bulb Replacement ..........................................5-47

Halogen Bulbs ..............................................5-47Headlamps, Front Turn Signal, Sidemarker,

and Parking Lamps ....................................5-48Center High-Mounted Stoplamp (CHMSL) .........5-49Taillamps and Turn Signal Lamps (Coupe) .......5-50Taillamps, Turn Signal, Stoplamps and

Back-up Lamps (Sedan) .............................5-51Back-Up Lamps ............................................5-52Replacement Bulbs .......................................5-53

Windshield Wiper Blade Replacement ..............5-53

Section 5 Service and Appearance Care

5-1

Tires ..............................................................5-54Tire Sidewall Labeling ...................................5-56Tire Terminology and Definitions .....................5-58Inflation - Tire Pressure .................................5-61Tire Inspection and Rotation ...........................5-63When It Is Time for New Tires .......................5-64Buying New Tires .........................................5-64Different Size Tires and Wheels ......................5-66Uniform Tire Quality Grading ..........................5-67Wheel Alignment and Tire Balance ..................5-68Wheel Replacement ......................................5-68Tire Chains ..................................................5-70If a Tire Goes Flat ........................................5-70Changing a Flat Tire .....................................5-71Removing the Spare Tire and Tools ................5-72Removing the Flat Tire and Installing the

Spare Tire ................................................5-76Storing a Flat or Spare Tire and Tools ............5-80Compact Spare Tire ......................................5-83

Appearance Care ............................................5-83Cleaning the Inside of Your Vehicle .................5-83Fabric/Carpet ...............................................5-85Leather .......................................................5-85Instrument Panel, Vinyl, and Other

Plastic Surfaces ........................................5-86Care of Safety Belts ......................................5-86

Weatherstrips ...............................................5-86Washing Your Vehicle ...................................5-87Cleaning Exterior Lamps/Lenses .....................5-87Finish Care ..................................................5-87Windshield and Wiper Blades .........................5-88Aluminum or Chrome-Plated Wheels ................5-88Tires ...........................................................5-89Sheet Metal Damage .....................................5-89Finish Damage .............................................5-89Underbody Maintenance ................................5-90Chemical Paint Spotting .................................5-90Vehicle Care/Appearance Materials ..................5-90

Vehicle Identification ......................................5-91Vehicle Identification Number (VIN) .................5-91Service Parts Identification Label .....................5-92

Electrical System ............................................5-92Add-On Electrical Equipment ..........................5-92Headlamp Wiring ..........................................5-93Windshield Wiper Fuses ................................5-93Power Windows and Other Power Options .......5-93Fuses and Circuit Breakers ............................5-93Floor Console Fuse Block ..............................5-94Engine Compartment Fuse Block ....................5-96

Capacities and Specifications ........................5-102

Section 5 Service and Appearance Care

5-2

ServiceYour dealer knows your vehicle best and wants you tobe happy with it. We hope you will go to your dealerfor all your service needs. You will get genuine GM partsand GM-trained and supported service people.

We hope you will want to keep your GM vehicle all GM.Genuine GM parts have one of these marks:

Accessories and ModificationsWhen you add non-GM accessories to your vehicle theycan affect your vehicle’s performance and safety,including such things as, braking, stability, ride andhandling, emissions systems, aerodynamics, durability,and electronic systems like antilock brakes, tractioncontrol and stability control. Some of these accessoriesmay even cause malfunction or damage not coveredby warranty.

GM Accessories are designed to complement andfunction with other systems on your vehicle. YourGM dealer can accessorize your vehicle using genuineGM Accessories. When you go to your GM dealerand ask for GM Accessories, you will know thatGM-trained and supported service technicians willperform the work using genuine GM Accessories.

California Proposition 65 WarningMost motor vehicles, including this one, contain and/oremit chemicals known to the State of California tocause cancer and birth defects or other reproductiveharm. Engine exhaust, many parts and systems(including some inside the vehicle), many fluids, andsome component wear by-products contain and/or emitthese chemicals.

5-3

Doing Your Own Service Work

{CAUTION:

You can be injured and your vehicle could bedamaged if you try to do service work on avehicle without knowing enough about it.

• Be sure you have sufficient knowledge,experience, the proper replacement parts,and tools before you attempt any vehiclemaintenance task.

• Be sure to use the proper nuts, bolts, andother fasteners. English and metricfasteners can be easily confused. If youuse the wrong fasteners, parts can laterbreak or fall off. You could be hurt.

If you want to do some of your own service work, youwill want to use the proper service manual. It tells youmuch more about how to service your vehicle than thismanual can. To order the proper service manual, seeService Publications Ordering Information on page 7-17.

Your vehicle has an airbag system. Before attemptingto do your own service work, see Servicing YourAirbag-Equipped Vehicle on page 1-64.

You should keep a record with all parts receipts and listthe mileage and the date of any service work youperform. See Maintenance Record on page 6-15.

5-4

Adding Equipment to the Outside ofYour VehicleThings you might add to the outside of your vehicle canaffect the airflow around it. This may cause wind noiseand affect windshield washer performance. Check withyour dealer before adding equipment to the outsideof your vehicle.

FuelThe 8th digit of your vehicle identification number (VIN)shows the code letter or number that identifies yourengine. You will find the VIN at the top left of theinstrument panel. See Vehicle IdentificationNumber (VIN) on page 5-91.

Gasoline OctaneIf your vehicle has the 2.2L L4 engine (VIN Code F),use regular unleaded gasoline with a posted octanerating of 87 or higher. If the octane rating is less than 87,you may notice an audible knocking noise when youdrive, commonly referred to as spark knock. If thisoccurs, use a gasoline rated at 87 octane or higher assoon as possible. If you are using gasoline rated at87 octane or higher and you hear heavy knocking, yourengine needs service.

If your vehicle has the 2.4L L4 engine (VIN Code B) orthe 2.0L Supercharged engine (VIN Code P), usepremium unleaded gasoline with a posted octane ratingof 91 or higher. You may also use regular unleadedgasoline rated at 87 octane or higher, but your vehicle’sacceleration may be slightly reduced, and you maynotice a slight audible knocking noise, commonlyreferred to as spark knock. If the octane is less than 87,you may notice a heavy knocking noise when you drive.If this occurs, use a gasoline rated at 87 octane orhigher as soon as possible. Otherwise, you mightdamage your engine. If you are using gasoline rated at87 octane or higher and you hear heavy knocking, yourengine needs service.

5-5

Gasoline SpecificationsAt a minimum, gasoline should meet ASTMspecification D 4814 in the United States orCAN/CGSB-3.5 in Canada. Some gasolines maycontain an octane-enhancing additive calledmethylcyclopentadienyl manganese tricarbonyl (MMT).General Motors recommends against the use ofgasolines containing MMT. See Additives on page 5-6for additional information.

California FuelIf your vehicle is certified to meet California EmissionsStandards, it is designed to operate on fuels that meetCalifornia specifications. See the underhood emissioncontrol label. If this fuel is not available in states adoptingCalifornia emissions standards, your vehicle will operatesatisfactorily on fuels meeting federal specifications, butemission control system performance may be affected.The malfunction indicator lamp may turn on and yourvehicle may fail a smog-check test. See MalfunctionIndicator Lamp on page 3-32. If this occurs, return to yourauthorized GM dealer for diagnosis. If it is determinedthat the condition is caused by the type of fuel used,repairs may not be covered by your warranty.

AdditivesTo provide cleaner air, all gasolines in the United Statesare now required to contain additives that will helpprevent engine and fuel system deposits from forming,allowing your emission control system to work properly.In most cases, you should not have to add anythingto your fuel. However, some gasolines contain onlythe minimum amount of additive required to meetU.S. Environmental Protection Agency regulations.To help keep fuel injectors and intake valves clean, or ifyour vehicle experiences problems due to dirty injectorsor valves, look for gasoline that is advertised as TOPTIER Detergent Gasoline. Also, your GM dealer hasadditives that will help correct and prevent mostdeposit-related problems.

Gasolines containing oxygenates, such as ethers andethanol, and reformulated gasolines may be available inyour area. General Motors recommends that you usethese gasolines if they comply with the specificationsdescribed earlier. However, E85 (85% ethanol) andother fuels containing more than 10% ethanol mustnot be used in vehicles that were not designed forthose fuels.

5-6

Notice: Your vehicle was not designed for fuel thatcontains methanol. Do not use fuel containingmethanol. It can corrode metal parts in your fuelsystem and also damage the plastic and rubberparts. That damage would not be covered underyour warranty.

Some gasolines that are not reformulated forlow emissions may contain an octane-enhancingadditive called methylcyclopentadienyl manganesetricarbonyl (MMT); ask the attendant where you buygasoline whether the fuel contains MMT. General Motorsrecommends against the use of such gasolines. Fuelscontaining MMT can reduce the life of spark plugs andthe performance of the emission control system maybe affected. The malfunction indicator lamp may turn on.If this occurs, return to your authorized GM dealerfor service.

Fuels in Foreign CountriesIf you plan on driving in another country outside theUnited States or Canada, the proper fuel may be hardto find. Never use leaded gasoline or any other fuelnot recommended in the previous text on fuel. Costlyrepairs caused by use of improper fuel would notbe covered by your warranty.To check the fuel availability, ask an auto club,or contact a major oil company that does businessin the country where you will be driving.

5-7

Filling the Tank

{CAUTION:

Fuel vapor burns violently and a fuel fire cancause bad injuries. To help avoid injuries to youand others, read and follow all the instructionson the pump island. Turn off your engine whenyou are refueling. Do not smoke if you are nearfuel or refueling your vehicle. Keep sparks,flames, and smoking materials away from fuel.Do not leave the fuel pump unattended whenrefueling your vehicle — this is against the lawin some places. Keep children away from thefuel pump; never let children pump fuel.

The tethered fuel cap is located behind a hinged fueldoor on the passenger’s side of the vehicle.

To remove the fuel cap, turn it slowly counterclockwise.The fuel cap has a spring in it; if the cap is releasedtoo soon, it will spring back to the right.

While refueling, hang the tethered fuel cap from thehook on the fuel door.

5-8

{CAUTION:

If you spill fuel and then something ignites it,you could be badly burned. Fuel can spray outon you if you open the fuel cap too quickly.This spray can happen if your tank is nearlyfull, and is more likely in hot weather. Openthe fuel cap slowly and wait for any hiss noiseto stop. Then unscrew the cap all the way.

Be careful not to spill fuel. Do not top off or overfill thetank and wait a few seconds after you have finishedpumping before removing the nozzle. Clean fuel frompainted surfaces as soon as possible. See WashingYour Vehicle on page 5-87.

When replacing the fuel cap, turn it clockwise until itclicks. Make sure the cap is fully installed. Thediagnostic system can determine if the fuel cap hasbeen left off or improperly installed. This would allow fuelto evaporate into the atmosphere. See MalfunctionIndicator Lamp on page 3-32.

The CHECK GAS CAP message will be displayed onthe Driver Information Center (DIC) if the fuel cap is notproperly installed. See DIC Warnings and Messageson page 3-40 for more information.

{CAUTION:

If a fire starts while you are refueling, do notremove the nozzle. Shut off the flow of fuel byshutting off the pump or by notifying thestation attendant. Leave the area immediately.

Notice: If you need a new fuel cap, be sure to getthe right type. Your dealer can get one for you.If you get the wrong type, it may not fit properly.This may cause your malfunction indicator lamp tolight and may damage your fuel tank and emissionssystem. See Malfunction Indicator Lamp onpage 3-32.

5-9

Filling a Portable Fuel Container

{CAUTION:

Never fill a portable fuel container while it is inyour vehicle. Static electricity discharge fromthe container can ignite the gasoline vapor.You can be badly burned and your vehicledamaged if this occurs. To help avoid injury toyou and others:

• Dispense gasoline only into approvedcontainers.

• Do not fill a container while it is inside avehicle, in a vehicle’s trunk, pickup bed,or on any surface other than the ground.

• Bring the fill nozzle in contact with theinside of the fill opening before operatingthe nozzle. Contact should be maintaineduntil the filling is complete.

• Do not smoke while pumping gasoline.

Checking Things Underthe Hood

{CAUTION:

An electric fan under the hood can start upand injure you even when the engine is notrunning. Keep hands, clothing and tools awayfrom any underhood electric fan.

{CAUTION:

Things that burn can get on hot engine partsand start a fire. These include liquids like fuel,oil, coolant, brake fluid, windshield washer andother fluids, and plastic or rubber. You orothers could be burned. Be careful not to dropor spill things that will burn onto a hot engine.

5-10

Hood ReleaseTo open the hood, do the following.

1. Pull the interior hoodrelease lever with thissymbol on it. It islocated under theinstrument panel onthe driver’s side of thevehicle.

2. Then go to the front of the vehicle and push thesecondary hood release lever to the left. It islocated under the front center of the hood towardthe driver’s side of the vehicle.

3. After you have partially lifted the hood, a gas strutwill automatically take over to lift and hold the hoodin the fully open position.Before closing the hood, be sure all the filler capsare on properly. Lower the hood until the lifting forceof the strut is reduced, then release the hood tolatch fully. Check to make sure the hood is closedand repeat the process if necessary.

5-11

Engine Compartment OverviewWhen you open the hood on the 2.2L L4 engine (2.4L L4 engine similar), here is what you will see:

5-12

A. Engine Air Cleaner/Filter. See Engine AirCleaner/Filter on page 5-21.

B. Engine Oil Fill Cap. See “When to Add Engine Oil”under Engine Oil on page 5-15.

C. Engine Oil Dipstick (Out of View). See “CheckingEngine Oil” under Engine Oil on page 5-15.

D. Brake Master Cylinder Reservoir. See “Brake Fluid”under Brakes on page 5-36 and Hydraulic Clutchon page 5-23.

E. Engine Compartment Fuse Block. See EngineCompartment Fuse Block on page 5-96.

F. Remote Positive (+) Terminal. See Jump Starting onpage 5-40.

G. Remote Negative (−) Terminal. See Jump Startingon page 5-40.

H. Engine Coolant Surge Tank. See Cooling System onpage 5-31.

I. Windshield Washer Fluid Reservoir. See “AddingWasher Fluid” under Windshield Washer Fluidon page 5-35.

5-13

When you open the hood on the 2.0L L4 Supercharged engine, here is what you will see:

5-14

A. Windshield Washer Fluid Reservoir. See “AddingWasher Fluid” under Windshield Washer Fluidon page 5-35.

B. Engine Oil Dipstick. See “Checking Engine Oil”under Engine Oil on page 5-15.

C. Engine Oil Fill Cap. See “When to Add Engine Oil”under Engine Oil on page 5-15.

D. Intercooler System Pressure Cap. See EngineCoolant on page 5-23.

E. Brake Master Cylinder Reservoir. See “Brake Fluid”under Brakes on page 5-36 and Hydraulic Clutchon page 5-23.

F. Engine Compartment Fuse Block. See EngineCompartment Fuse Block on page 5-96.

G. Remote Positive (+) Terminal. See Jump Starting onpage 5-40.

H. Remote Negative (−) Terminal. See Jump Startingon page 5-40.

I. Engine Coolant Surge Tank. See Cooling System onpage 5-31.

J. Engine Air Cleaner/Filter. See Engine AirCleaner/Filter on page 5-21.

Engine Oil

Checking Engine OilIt is a good idea to check your engine oil every time youget fuel. In order to get an accurate reading, the oilmust be warm and the vehicle must be on level ground.

The engine oil dipstick handle is a yellow loop. SeeEngine Compartment Overview on page 5-12 forthe location of the engine oil dipstick.

1. Turn off the engine and give the oil several minutesto drain back into the oil pan. If you do not do this,the oil dipstick might not show the actual level.

2. Pull out the dipstick and clean it with a paper towelor cloth, then push it back in all the way. Remove itagain, keeping the tip down, and check the level.

5-15

When to Add Engine Oil

If the oil is below the MIN (minimum) mark, you willneed to add at least one quart/liter of oil. But you mustuse the right kind. This section explains what kind ofoil to use. For engine oil crankcase capacity, seeCapacities and Specifications on page 5-102.

Notice: Do not add too much oil. If your engine hasso much oil that the oil level gets above the uppermark that shows the proper operating range, yourengine could be damaged.

See Engine Compartment Overview on page 5-12 forthe location of the engine oil fill cap.

Be sure to add enough oil to put the level somewhere inthe proper operating range. Push the dipstick all theway back in when you are through.

2.2L L4 Engine and2.4L L4 Engine

2.0L L4 SuperchargedEngine

5-16

What Kind of Engine Oil to UseFor Vehicles With the 2.2L or 2.4LL4 Engine

Look for two things:

• GM6094M

Your vehicle’s engine requires oil meetingGM Standard GM6094M. You should look for anduse only an oil that meets GM Standard GM6094M.

• SAE 5W-30As shown in the viscosity chart, SAE 5W-30 is bestfor your vehicle.These numbers on an oil container show itsviscosity, or thickness. Do not use other viscosityoils such as SAE 20W-50.

Oils meeting theserequirements should alsohave the starburstsymbol on the container.This symbol indicatesthat the oil has beencertified by the AmericanPetroleum Institute (API).

You should look for this information on the oil container,and use only those oils that are identified as meetingGM Standard GM6094M and have the starburst symbolon the front of the oil container.

5-17

Notice: Use only engine oil identified as meetingGM Standard GM6094M and showing the AmericanPetroleum Institute Certified For Gasoline Enginesstarburst symbol. Failure to use the recommendedoil can result in engine damage not covered byyour warranty.

GM Goodwrench® oil meets all the requirements foryour vehicle.

If you are in an area of extreme cold, where thetemperature falls below −20°F (−29°C), it isrecommended that you use either an SAE 5W-30synthetic oil or an SAE 0W-30 oil. Both will provideeasier cold starting and better protection for your engineat extremely low temperatures.

For Vehicles with the 2.0L L4Supercharged Engine Only

Look for two things:

• GM4718M

Your vehicle’s engine requires a special oil meetingGM Standard GM4718M, such as Mobil 1® orequivalent. Oils meeting this standard may beidentified as synthetic. However, not all synthetic oilswill meet this GM standard. You should look for anduse only an oil that meets GM Standard GM4718M.

5-18

Notice: If you use oils that do not have theGM4718M Standard designation, you can causeengine damage not covered by your warranty.

• SAE 5W-30

As shown in the viscosity chart, SAE 5W-30 is bestfor your vehicle.These numbers on an oil container show itsviscosity, or thickness. Do not use other viscosityoils such as SAE 20W-50.

Oils meeting theserequirements should alsohave the starburstsymbol on the container.This symbol indicatesthat the oil has beencertified by the AmericanPetroleum Institute (API).

You should look for this on the oil container, anduse only those oils that are identified as meetingGM Standard GM4718M and have the starburst symbolon the front of the oil container.

Your vehicle’s engine is filled at the factory with asynthetic oil which meets all requirements for yourvehicle.

Substitute Engine Oil: When adding oil to maintainengine oil level, oil meeting GM Standard GM4718Mmay not be available. You can add substitute oildesignated SAE 5W-30 with the starburst symbol at alltemperatures. Substitute oil not meeting GM StandardGM4718M should not be used for an oil change.

Engine Oil AdditivesDo not add anything to your oil. The recommended oilswith the starburst symbol that meet GM standards areall you will need for good performance and engineprotection.

5-19

Engine Oil Life System

When to Change Engine OilYour vehicle has a computer system that lets you knowwhen to change the engine oil and filter. This is basedon engine revolutions and engine temperature, and noton mileage. Based on driving conditions, the mileageat which an oil change will be indicated can varyconsiderably. For the oil life system to work properly,you must reset the system every time the oil is changed.

When the system has calculated that oil life has beendiminished, it will indicate that an oil change isnecessary. A CHANGE OIL SOON message in theDriver Information Center (DIC) will come on. See DICWarnings and Messages on page 3-40. Change youroil as soon as possible within the next 600 miles(1 000 km). It is possible that, if you are driving underthe best conditions, the oil life system may not indicatethat an oil change is necessary for over a year.However, your engine oil and filter must be changed atleast once a year and at this time the system must bereset. Your dealer has GM-trained service people whowill perform this work using genuine GM parts and resetthe system. It is also important to check your oilregularly and keep it at the proper level.

If the system is ever reset accidentally, you mustchange your oil at 3,000 miles (5 000 km) since yourlast oil change. Remember to reset the oil life systemwhenever the oil is changed.

How to Reset the Engine Oil LifeSystemThe Engine Oil Life System calculates when to changeyour engine oil and filter based on vehicle use.Anytime your oil is changed, reset the system so it cancalculate when the next oil change is required. If asituation occurs where you change your oil prior to aCHANGE OIL SOON message being turned on,reset the system.

After changing the engine oil, the system must be resetas follows:

1. Turn the ignition to RUN, with the engine off.

2. Press the information and reset buttons on the DICat the same time to enter the personalization menu.See DIC Vehicle Personalization on page 3-42.

3. Press the information button to scroll through theavailable personalization menu modes until theDIC display shows OIL-LIFE RESET.

5-20

4. Press and hold the reset button until the DICdisplay shows ACKNOWLEDGED. This will tell youthe system has been reset.

5. Turn the key to LOCK.

If the CHANGE OIL SOON message comes back onwhen you start your vehicle, the engine oil life systemhas not reset. Repeat the reset procedure.

What to Do with Used OilUsed engine oil contains certain elements that may beunhealthy for your skin and could even cause cancer.Do not let used oil stay on your skin for very long. Cleanyour skin and nails with soap and water, or a goodhand cleaner. Wash or properly dispose of clothing orrags containing used engine oil. See the manufacturer’swarnings about the use and disposal of oil products.

Used oil can be a threat to the environment. If youchange your own oil, be sure to drain all the oil from thefilter before disposal. Never dispose of oil by putting itin the trash, pouring it on the ground, into sewers, or intostreams or bodies of water. Instead, recycle it bytaking it to a place that collects used oil. If you have aproblem properly disposing of your used oil, ask yourdealer, a service station or a local recycling centerfor help.

Engine Air Cleaner/FilterSee Engine Compartment Overview on page 5-12 forthe location of the engine air cleaner/filter.

When to Inspect the Engine AirCleaner/FilterInspect the air cleaner/filter at the Maintenance IIintervals and replace it at the first oil change after each50,000 mile (83 000 km) interval. See ScheduledMaintenance on page 6-4 for more information. If youare driving in dusty/dirty conditions, inspect the filterat each engine oil change.

5-21

How to Inspect the Engine AirCleaner/Filter2.2L and 2.4L L4 EnginesTo inspect the air cleaner/filter remove the filter from thevehicle and lightly shake the filter to release loose dustand dirt. If the filter remains caked with dirt, a newfilter is required.

To inspect or replace the filter, remove the screws thathold the cover on and lift off the cover. Be sure toreinstall the cover tightly.

2.0L L4 Supercharged EngineThere is a special procedure for inspecting and replacingthe filter. Because this procedure is difficult, youshould have it done at your dealer service department.Contact your dealer for additional information, or theprocedure can be found in the service manual. Topurchase a service manual, see Service PublicationsOrdering Information on page 7-17.

{CAUTION:

Operating the engine with the air cleaner/filteroff can cause you or others to be burned.The air cleaner not only cleans the air; it helpsto stop flames if the engine backfires. If it isnot there and the engine backfires, you couldbe burned. Do not drive with it off, and becareful working on the engine with the aircleaner/filter off.

Notice: If the air cleaner/filter is off, a backfire cancause a damaging engine fire. And, dirt can easilyget into your engine, which will damage it. Alwayshave the air cleaner/filter in place when you aredriving.

5-22

Automatic Transaxle FluidIt is not necessary to check the transaxle fluid level.A transaxle fluid leak is the only reason for fluid loss.If a leak occurs, take your vehicle to the dealershipservice department and have it repaired as soonas possible.

Change the fluid and filter at the intervals listed inAdditional Required Services on page 6-6, and be sureto use the transaxle fluid listed in RecommendedFluids and Lubricants on page 6-12.

Notice: Use of the incorrect automatic transaxlefluid may damage your vehicle, and the damagesmay not be covered by your warranty. Alwaysuse the automatic transaxle fluid listed inRecommended Fluids and Lubricants on page 6-12.

Manual Transaxle FluidIt is not necessary to check the transaxle fluid level.A transaxle fluid leak is the only reason for fluid loss.If a leak occurs, take the vehicle to the dealershipservice department and have it repaired as soon aspossible. See Recommended Fluids and Lubricants onpage 6-12 for the proper fluid to use.

Hydraulic ClutchThe hydraulic clutch linkage in your vehicle isself-adjusting. This system does not have its ownreservoir. It receives fluid from the brake mastercylinder reservoir.

See Brakes on page 5-36 for more information.

Engine CoolantThe cooling system in your vehicle is filled withDEX-COOL® engine coolant. This coolant isdesigned to remain in your vehicle for five years or150,000 miles (240 000 km), whichever occurs first,if you add only DEX-COOL® extended life coolant.

The following explains your cooling system and how toadd coolant when it is low. If you have a problem withengine overheating, see Engine Overheating onpage 5-29.

5-23

A 50/50 mixture of clean, drinkable water andDEX-COOL® coolant will:

• Give freezing protection down to −34°F (−37°C).

• Give boiling protection up to 265°F (129°C).

• Protect against rust and corrosion.

• Help keep the proper engine temperature.

• Let the warning lights and gages work as theyshould.

Notice: Using coolant other than DEX-COOL ® maycause premature engine, heater core, or radiatorcorrosion. In addition, the engine coolant mayrequire changing sooner, at the first maintenanceservice after each 25,000 miles (41 500 km) or24 months, whichever occurs first. Any repairswould not be covered by your warranty. Always useDEX-COOL® (silicate-free) coolant in your vehicle.

What to UseUse a mixture of one-half clean, drinkable water andone-half DEX-COOL® coolant which will not damagealuminum parts. If you use this coolant mixture, you donot need to add anything else.

{CAUTION:

Adding only plain water to your coolingsystem can be dangerous. Plain water, orsome other liquid such as alcohol, can boilbefore the proper coolant mixture will. Yourvehicle’s coolant warning system is set for theproper coolant mixture. With plain water or thewrong mixture, your engine could get too hotbut you would not get the overheat warning.Your engine could catch fire and you or otherscould be burned. Use a 50/50 mixture of clean,drinkable water and DEX-COOL ® coolant.

Notice: If you use an improper coolant mixture,your engine could overheat and be badly damaged.The repair cost would not be covered by yourwarranty. Too much water in the mixture can freezeand crack the engine, radiator, heater core andother parts.

5-24

If you have to add coolant more than four times a year,have your dealer check your cooling system.

Notice: If you use extra inhibitors and/or additivesin your vehicle’s cooling system, you coulddamage your vehicle. Use only the proper mixtureof the engine coolant listed in this manual forthe cooling system. See Recommended Fluids andLubricants on page 6-12 for more information.

Checking Coolant

The coolant surge tank is located in the enginecompartment on the driver’s side of the vehicle.See Engine Compartment Overview on page 5-12 formore information on location.

{CAUTION:

Turning the surge tank pressure cap when theengine and radiator are hot can allow steamand scalding liquids to blow out and burn youbadly. Never turn the surge tank pressurecap — even a little — when the engine andradiator are hot.

The vehicle must be on a level surface. When yourengine is cold, the coolant level should be at theCOLD FILL line.

5-25

Adding CoolantIf you need more coolant, add the proper DEX-COOL®

coolant mixture at the coolant surge tank, but onlywhen the engine is cool. If the coolant surge tank isempty, a special fill procedure is necessary. See EngineOverheating on page 5-29 for instructions on “How toAdd Coolant to the Coolant Surge Tank.”

{CAUTION:

You can be burned if you spill coolant on hotengine parts. Coolant contains ethylene glycol,and it will burn if the engine parts are hotenough. Do not spill coolant on a hot engine.

When replacing the pressure cap, make sure it ishand-tight and fully seated.

Checking Intercooler System Coolant(2.0L L4 Supercharged Engine Only)

The intercooler system fill neck is located in the frontof the engine compartment, near the center of thevehicle. See Engine Compartment Overview onpage 5-12 for more information on location.

5-26

{CAUTION:

Turning the fill neck pressure cap when theengine and intercooler are hot can allowsteam and scalding liquids to blow out andburn you badly. Never turn the fill neckpressure cap — even a little — when theengine and intercooler are hot.

Park your vehicle on a level surface and turn off theengine. When the engine is cold, the coolant levelshould be visible within the horizontal tube section ofthe fill neck. When the engine is warm, the coolant levelcould be as high as the FULL HOT line on the fillneck, or a little higher.

Adding Coolant to the Intercooler SystemFill NeckIf coolant is not visible in the fill neck, add a 50/50mixture of clean, drinkable water and DEX-COOL®

coolant at the fill neck, but be sure that the coolingsystem, including the fill neck pressure cap, is coolbefore you do so.

{CAUTION:

Steam and scalding liquids from a hot coolingsystem can blow out and burn you badly. Theyare under pressure, and if you turn theintercooler system pressure cap — even alittle — they can come out at high speed. Neverturn the cap when the intercooler system,including the intercooler system pressure cap,is hot. Wait for the intercooler system andintercooler system pressure cap to cool if youever have to turn the pressure cap.

5-27

{CAUTION:

Adding only plain water to your intercoolersystem can be dangerous. Plain water, or someother liquid such as alcohol, can boil before theproper coolant mixture will. With plain water orthe wrong mixture, your engine could get toohot. Your engine could catch fire and you orothers could be burned. Use a 50/50 mixture ofclean, drinkable water and DEX-COOL ® coolant.

Notice: In cold weather, water can freeze and crackthe engine, intercooler, and other parts. Use therecommended coolant and the proper coolantmixture.

{CAUTION:

You can be burned if you spill coolant on hotengine parts. Coolant contains ethylene glycol,and it will burn if the engine parts are hotenough. Do not spill coolant on a hot engine.

1. You can remove the fill neck pressure cap whenthe intercooler system, including the upperintercooler hose, is no longer hot. Turn the pressurecap slowly counterclockwise about one-quarter ofa turn. If you hear a hiss, wait for that to stop. Thiswill allow any remaining pressure to be vented.

2. Then keep turning the pressure cap slowly, andremove it.

3. Add the proper DEX-COOL® coolant mixture to thefill neck, until there is coolant visible in the horizontaltube section of the fill neck.

4. With the fill neck pressure cap off, start the engineand let it run for at least 30 seconds. Watch outfor the engine cooling fan. Turn the engine off.By this time, the coolant level inside the fill neckmay be lower. If the level drops so that coolant is nolonger visible in the horizontal tube section of thefill neck, add more of the DEX-COOL®

coolant mixture to the fill neck until the level isagain visible in the horizontal tube section.

5. Replace the intercooler system pressure cap.Be sure the pressure cap is hand-tight and fullyseated.If the coolant is not at the proper level when thesystem cools down again, see your dealer.

5-28

Coolant Surge Tank Pressure CapNotice: If the pressure cap is not tightly installed,coolant loss and possible engine damage mayoccur. Be sure the cap is properly and tightlysecured.

The coolant surge tank pressure cap must be fullyinstalled on the coolant surge tank. See EngineCompartment Overview on page 5-12 for moreinformation on location.

Engine OverheatingYou will find an engine coolant temperature warninglight on your vehicle’s instrument panel. See EngineCoolant Temperature Warning Light on page 3-32 formore information.

If Steam Is Coming From Your Engine

{CAUTION:

Steam from an overheated engine can burnyou badly, even if you just open the hood. Stayaway from the engine if you see or hear steamcoming from it. Just turn it off and geteveryone away from the vehicle until it coolsdown. Wait until there is no sign of steam orcoolant before you open the hood.

If you keep driving when your engine isoverheated, the liquids in it can catch fire. Youor others could be badly burned. Stop yourengine if it overheats, and get out of thevehicle until the engine is cool.

Notice: If your engine catches fire because youkeep driving with no coolant, your vehicle canbe badly damaged. The costly repairs would not becovered by your warranty.

5-29

If No Steam Is Coming From YourEngineAn engine coolant temperature warning can indicatea serious problem. See Engine Coolant TemperatureWarning Light on page 3-32.

If you get an engine coolant temperature warning, butsee or hear no steam, the problem may not be tooserious. Sometimes the engine can get a little too hotwhen you:

• Climb a long hill on a hot day.

• Stop after high-speed driving.

• Idle for long periods in traffic.

• Tow a trailer.

If you get the engine coolant temperature warning withno sign of steam, try this for a minute or so:

1. If you have an air conditioner and it is on, turn it off.

2. In heavy traffic, let the engine idle in NEUTRAL (N)while stopped. If it is safe to do so, pull off the road,shift to PARK (P) or NEUTRAL (N) and let theengine idle.

3. Turn on your heater to full hot at the highest fanspeed and open the windows as necessary.

If you no longer have the overheat warning, you candrive. Just to be safe, drive slower for about 10 minutes.If the warning does not come back on, you can drivenormally.

If the warning continues and you have not stopped, pullover, stop, and park your vehicle right away.

If there is still no sign of steam, you can idle the enginefor three minutes while you are parked. If you still havethe warning, turn off the engine and get everyone outof the vehicle until it cools down.

You may decide not to lift the hood but to get servicehelp right away.

5-30

Cooling SystemWhen you decide it is safe to lift the hood, here is whatyou will see:

A. Electric Engine Cooling FanB. Coolant Surge Tank and Pressure Cap

A. Electric Engine Cooling FansB. Intercooler System Pressure CapC. Coolant Surge Tank and Pressure Cap

{CAUTION:

An electric engine cooling fan under the hoodcan start up even when the engine is notrunning and can injure you. Keep hands,clothing and tools away from any underhoodelectric fan.

2.2L L4 Engine shown, 2.4L L4 Engine similar

2.0L L4 Supercharged Engine

5-31

If the coolant inside the coolant surge tank is boiling,do not do anything else until it cools down. The vehicleshould be parked on a level surface.

The coolant level should be at the COLD FILL line.If it is not, you may have a leak at the pressure cap orin the radiator hoses, heater hoses, radiator, waterpump, or somewhere in the cooling system.

{CAUTION:

Heater and radiator hoses, and other engineparts, can be very hot. Do not touch them.If you do, you can be burned.

Do not run the engine if there is a leak. If yourun the engine, it could lose all coolant. Thatcould cause an engine fire, and you could beburned. Get any leak fixed before you drive thevehicle.

If your vehicle is equipped with the 2.2L or 2.4LL4 engine and there seems to be no leak, with theengine on, check to see if the electric engine coolingfan is running. If the engine is overheating, the fanshould be running. If it is not, your vehicle needs service.

If your vehicle is equipped with the 2.0L L4 Superchargedengine and there seems to be no leak, with the engineon, check to see if the electric engine cooling fans arerunning. If the engine is overheating, the fans should berunning. If they are not, your vehicle needs service.Notice: Engine damage from running your enginewithout coolant is not covered by your warranty.Notice: Using coolant other than DEX-COOL ® maycause premature engine, heater core or radiatorcorrosion. In addition, the engine coolant mayrequire changing sooner, at 30,000 miles (50 000 km)or 24 months, whichever occurs first. Any repairswould not be covered by your warranty. Always useDEX-COOL® (silicate-free) coolant in your vehicle.

5-32

How to Add Coolant to the CoolantSurge Tank

Notice: This vehicle has a specific coolant fillprocedure. Failure to follow this procedure couldcause your engine to overheat and be severelydamaged.

If you have not found a problem yet, check to see ifcoolant is visible in the coolant surge tank. If coolant isvisible but the coolant level is not at the COLD FILLline, add a 50/50 mixture of clean, drinkable water andDEX-COOL® coolant at the coolant surge tank, butbe sure the cooling system, including the coolant surgetank pressure cap, is cool before you do it. SeeEngine Coolant on page 5-23 for more information.

2.2L and 2.4L L4 EnginesIf no coolant is visible in the coolant surge tank, addcoolant as follows:

{CAUTION:

Steam and scalding liquids from a hot coolingsystem can blow out and burn you badly. Theyare under pressure, and if you turn the coolantsurge tank pressure cap — even a little — theycan come out at high speed.Never turn thecap when the cooling system, including thecoolant surge tank pressure cap, is hot. Wait forthe cooling system and coolant surge tankpressure cap to cool if you ever have to turn thepressure cap.

5-33

{CAUTION:

Adding only plain water to your coolingsystem can be dangerous. Plain water,or some other liquid such as alcohol, can boilbefore the proper coolant mixture will. Yourvehicle’s coolant warning system is set for theproper coolant mixture. With plain water or thewrong mixture, your engine could get too hotbut you would not get the overheat warning.Your engine could catch fire and you or otherscould be burned. Use a 50/50 mixture of clean,drinkable water and DEX-COOL ® coolant.

Notice: In cold weather, water can freeze and crackthe engine, radiator, heater core and other parts.Use the recommended coolant and the propercoolant mixture.

{CAUTION:

You can be burned if you spill coolant on hotengine parts. Coolant contains ethylene glycoland it will burn if the engine parts are hotenough. Do not spill coolant on a hot engine.

1. You can remove the coolant surge tank pressurecap when the cooling system, including the coolantsurge tank pressure cap and upper radiator hose,is no longer hot. Turn the pressure cap slowlycounterclockwise about two or two and one-halfturns. If you hear a hiss, wait for that to stop. Thiswill allow any pressure still left to be vented outthe discharge hose.

2. Then keep turning thepressure cap slowly,and remove it.

5-34

3. Fill the coolant surge tank with the proper mixture,to the COLD FILL line on the tank. Wait aboutfive minutes, then check to see if the level is belowthe COLD FILL line. If the level is below the line,add additional coolant to bring the level up tothe line. Repeat this procedure until the levelremains constant at the COLD FILL line for at leastfive minutes.

4. With the coolant surge tank pressure cap off, startthe engine and let it run until you can feel the upperradiator hose getting hot. Watch out for the enginecooling fan.By this time, the coolant level inside the coolantsurge tank may be lower. If the level is lower thanthe COLD FILL line, add more of the proper mixtureto the coolant surge tank until the level reachesthe COLD FILL line.

5. Then replace the pressure cap. Be sure thepressure cap is hand-tight and fully seated.See your dealer, if necessary.

2.0L L4 Supercharged EngineIf no coolant is visible in the coolant surge tank, you willneed to either see your dealer or refer to the DealerService Manual for a special coolant service fillprocedure to ensure enough coolant is added.To purchase a service manual, see Service PublicationsOrdering Information on page 7-17.

Windshield Washer FluidWhat to UseWhen you need windshield washer fluid, be sure to readthe manufacturer’s instructions before use. If you willbe operating your vehicle in an area where thetemperature may fall below freezing, use a fluid that hassufficient protection against freezing.

5-35

Adding Washer Fluid

Open the cap with thewasher symbol on it.Add washer fluid until thetank is full. See EngineCompartment Overview onpage 5-12 for reservoirlocation.

Notice:

• When using concentrated washer fluid, followthe manufacturer’s instructions for addingwater.

• Do not mix water with ready-to-use washer fluid.Water can cause the solution to freeze anddamage your washer fluid tank and other partsof the washer system. Also, water does notclean as well as washer fluid.

• Fill your washer fluid tank only three-quartersfull when it is very cold. This allows forexpansion if freezing occurs, which coulddamage the tank if it is completely full.

• Do not use engine coolant (antifreeze) in yourwindshield washer. It can damage your washersystem and paint.

Brakes

Brake Fluid

Your brake master cylinderand, on manual transaxlevehicles, the hydraulicclutch use the samereservoir. The reservoir isfilled with DOT-3 brakefluid. See EngineCompartment Overview onpage 5-12 for the locationof the reservoir.

There are only two reasons why the brake fluid level inthe reservoir might go down. The first is that the brakefluid goes down to an acceptable level during normalbrake lining wear. When new linings are put in, the fluidlevel goes back up. The other reason is that fluid isleaking out of the brake and/or clutch hydraulic system.If it is, you should have your brake and/or clutchsystem fixed, since a leak means that sooner or lateryour brakes and/or clutch will not work well, or willnot work at all.

5-36

So, it is not a good idea to top off your brake/clutchfluid. Adding fluid will not correct a leak. If you add fluidwhen your brake linings are worn, then you will havetoo much fluid when you get new brake linings.You should add or remove fluid, as necessary, onlywhen work is done on the brake/clutch hydraulic system.

{CAUTION:

If you have too much brake fluid, it can spill onthe engine. The fluid will burn if the engine ishot enough. You or others could be burned,and your vehicle could be damaged. Add brakefluid only when work is done on the brakeand/or clutch hydraulic system.

When your brake fluid falls to a low level, your brakewarning light will come on. See Brake System WarningLight on page 3-29.

What to AddWhen you do need brake fluid, use only DOT-3 brakefluid. Use new brake fluid from a sealed containeronly. See Recommended Fluids and Lubricants onpage 6-12.

Always clean the brake fluid reservoir cap and the areaaround the cap before removing it. This will help keepdirt from entering the reservoir.

{CAUTION:

With the wrong kind of fluid in yourbrake/clutch system, your brakes/clutch maynot work well, or they may not even work atall. This could cause a crash. Always use theproper brake fluid.

Notice:

• Using the wrong fluid can badly damagebrake/clutch system parts. For example, just afew drops of mineral-based oil, such as engineoil, in your brake/clutch hydraulic system candamage brake/clutch system parts so badlythat they will have to be replaced. Do notlet someone put in the wrong kind of fluid.

• If you spill brake fluid on your vehicle’s paintedsurfaces, the paint finish can be damaged.Be careful not to spill brake fluid on yourvehicle. If you do, wash it off immediately.See Washing Your Vehicle on page 5-87.

5-37

Brake WearYour vehicle has front disc brakes and may have reardrum brakes or rear disc brakes.Disc brake pads have built-in wear indicators that makea high-pitched warning sound when the brake padsare worn and new pads are needed. The sound maycome and go or be heard all the time your vehicleis moving, except when you are pushing on the brakepedal firmly.

{CAUTION:

The brake wear warning sound means that soonyour brakes will not work well. That could leadto an accident. When you hear the brake wearwarning sound, have your vehicle serviced.

Notice: Continuing to drive with worn-out brakepads could result in costly brake repair.

Some driving conditions or climates may cause a brakesqueal when the brakes are first applied or lightlyapplied. This does not mean something is wrong withyour brakes.

Properly torqued wheel nuts are necessary to helpprevent brake pulsation. When tires are rotated, inspectbrake pads for wear and evenly tighten wheel nuts inthe proper sequence to GM torque specifications.

If your vehicle has rear drum brakes, they do not havewear indicators, but if you ever hear a rear brakerubbing noise, have the rear brake linings inspectedimmediately. Also, the rear brake drums should beremoved and inspected each time the tires are removedfor rotation or changing. When you have the front brakepads replaced, have the rear brakes inspected, too.

Brake linings should always be replaced as completeaxle sets.

Brake Pedal TravelSee your dealer if the brake pedal does not return tonormal height, or if there is a rapid increase inpedal travel. This could be a sign of brake trouble.

5-38

Brake AdjustmentEvery time you make a moderate brake stop, yourdisc brakes adjust for wear. If you rarely make amoderate or heavier stop, then your brakes mightnot adjust correctly. If you drive in that way,then — very carefully — make a few moderate brakestops about every 1,000 miles (1 600 km), so yourbrakes will adjust properly.

If you have rear drum brakes and your brake pedalgoes down farther than normal, the rear drum brakesmay need adjustment. Adjust them by backing upand firmly applying the brakes a few times.

Replacing Brake System PartsThe braking system on a vehicle is complex. Its manyparts have to be of top quality and work well togetherif the vehicle is to have really good braking. Yourvehicle was designed and tested with top-qualityGM brake parts. When you replace parts of your brakingsystem — for example, when your brake linings weardown and you need new ones put in — be sure you getnew approved GM replacement parts. If you do not,your brakes may no longer work properly. For example,if someone puts in brake linings that are wrong foryour vehicle, the balance between your front and rearbrakes can change — for the worse. The brakingperformance you have come to expect can change inmany other ways if someone puts in the wrongreplacement brake parts.

BatteryYour vehicle has a maintenance free battery. When it istime for a new battery, get one that has the replacementnumber shown on the original battery’s label. Werecommend an ACDelco® replacement battery.

Your vehicle’s battery is located in the trunk. You do notneed to access the battery to jump start your vehicle.See Jump Starting on page 5-40.Warning: Battery posts, terminals, and relatedaccessories contain lead and lead compounds,chemicals known to the State of California to causecancer and reproductive harm. Wash hands afterhandling.

5-39

Vehicle StorageIf you are not going to drive your vehicle for 25 daysor more, remove the black, negative (−) cable fromthe battery. This will help keep your battery fromrunning down.

{CAUTION:

Batteries have acid that can burn you and gasthat can explode. You can be badly hurt if youare not careful. See Jump Starting on page 5-40for tips on working around a battery withoutgetting hurt.

Jump StartingIf your vehicle’s battery has run down, you may want touse another vehicle and some jumper cables to startyour vehicle. Be sure to use the following steps to doit safely.

{CAUTION:

Batteries can hurt you. They can be dangerousbecause:

• They contain acid that can burn you.• They contain gas that can explode

or ignite.• They contain enough electricity to

burn you.

If you do not follow these steps exactly, someor all of these things can hurt you.

Notice: Ignoring these steps could result in costlydamage to your vehicle that would not be coveredby your warranty.

Trying to start your vehicle by pushing or pulling itwill not work, and it could damage your vehicle.

1. Check the other vehicle. It must have a 12-voltbattery with a negative ground system.

Notice: If the other vehicle’s system is not a 12-voltsystem with a negative ground, both vehicles canbe damaged. Only use vehicles with 12-volt systemswith negative grounds to jump start your vehicle.

5-40

2. Get the vehicles close enough so the jumper cablescan reach, but be sure the vehicles are not touchingeach other. If they are, it could cause a groundconnection you do not want. You would not be ableto start your vehicle, and the bad grounding coulddamage the electrical systems.To avoid the possibility of the vehicles rolling,set the parking brake firmly on both vehiclesinvolved in the jump start procedure. Put anautomatic transaxle in PARK (P) or a manualtransaxle in NEUTRAL before setting theparking brake.

Notice: If you leave your radio or other accessorieson during the jump starting procedure, they couldbe damaged. The repairs would not be coveredby your warranty. Always turn off your radio andother accessories when jump starting your vehicle.

3. Turn off the ignition on both vehicles. Unplugunnecessary accessories plugged into the cigarettelighter or the accessory power outlet. Turn off theradio and all lamps that are not needed. This willavoid sparks and help save both batteries.And it could save the radio!

4. Open the hood on the other vehicle and locate thepositive (+) and negative (−) terminal locations onthat vehicle.You will not see the battery of your vehicle underthe hood. It is located in the trunk. You will not needto access your battery for jump starting. Yourvehicle has a remote positive (+) and a remotenegative (−) jump starting terminal.

The remote positiveterminal is located undera red tethered cap onthe engine compartmentfuse block. Lift thecap to access theterminal.

5-41

The remote negative (−)ground terminal, markedGND (−), is located behindthe engine coolantsurge tank.

See Engine Compartment Overview on page 5-12for more information on the location of thepositive (+) and negative (−) terminals on yourvehicle.

{CAUTION:

An electric fan can start up even when theengine is not running and can injure you. Keephands, clothing and tools away from anyunderhood electric fan.

{CAUTION:

Using a match near a battery can cause batterygas to explode. People have been hurt doingthis, and some have been blinded. Use aflashlight if you need more light.

Be sure the battery has enough water. You donot need to add water to the battery installedin your new vehicle. But if a battery has fillercaps, be sure the right amount of fluid is there.If it is low, add water to take care of that first.If you don’t, explosive gas could be present.

Battery fluid contains acid that can burn you.Do not get it on you. If you accidentally get itin your eyes or on your skin, flush the placewith water and get medical help immediately.

5-42

{CAUTION:

Fans or other moving engine parts can injureyou badly. Keep your hands away from movingparts once the engine is running.

5. Check that the jumper cables do not have looseor missing insulation. If they do, you could get ashock. The vehicles could be damaged too.Before you connect the cables, here are somebasic things you should know. Positive (+) will go topositive (+) or to a remote positive (+) terminal ifthe vehicle has one. Negative (−) will go to a heavy,unpainted metal engine part or to a remotenegative (−) terminal if the vehicle has one.Do not connect positive (+) to negative (−) or youwill get a short that would damage the battery andmaybe other parts too. And do not connect thenegative (−) cable to the negative (−) terminal on thedead battery because this can cause sparks.

6. Connect the red positive (+) cable to the positive (+)terminal location on the vehicle with the deadbattery. Use a remote positive (+) terminal if thevehicle has one.

7. Do not let the other end touch metal. Connect it tothe positive (+) terminal of the good battery. Use aremote positive (+) terminal if the vehicle has one.

8. Now connect the black negative (−) cable to thenegative (−) terminal of the good battery. Use aremote negative (−) terminal if the vehicle has one.Do not let the other end touch anything until thenext step. The other end of the negative (−) cabledoes not go to the dead battery. It goes to aheavy, unpainted metal engine part or to a remotenegative (−) terminal on the vehicle with thedead battery.

9. Connect the other end of the negative (−) cable tothe negative (−) terminal location on the vehicle withthe dead battery. Your vehicle has a remotenegative (−) terminal marked GND (−).

10. Now start the vehicle with the good battery and runthe engine for a while.

11. Try to start the vehicle that had the dead battery.If it will not start after a few tries, it probably needsservice.

5-43

Notice: If the jumper cables are connected orremoved in the wrong order, electrical shorting mayoccur and damage the vehicle. The repairs wouldnot be covered by your warranty. Always connectand remove the jumper cables in the correctorder, making sure that the cables do not toucheach other or other metal.

A. Heavy, Unpainted Metal Engine Part or RemoteNegative (−) Terminal (GND)

B. Good Battery or Remote Positive (+) and RemoteNegative (−) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both vehicles, dothe following:

1. Disconnect the black negative (−) cable from thevehicle that had the dead battery.

2. Disconnect the black negative (−) cable from thevehicle with the good battery.

3. Disconnect the red positive (+) cable from thevehicle with the good battery.

4. Disconnect the red positive (+) cable from the othervehicle.

5. Return the positive (+) terminal cover to its originalposition.

Headlamp AimingThe vehicle has a visual optical headlamp aimingsystem. The aim has been preset at the factory andshould need no further adjustment

However, If the vehicle is damaged in an accident, theheadlamp aim may be affected and adjustment maybe necessary.

If oncoming vehicles flash their high beams at you, thismay also mean the vertical aim needs to be adjusted.

Jumper Cable Removal

5-44

It is recommended that the vehicle is taken to yourdealer for service if the headlamps need to be re-aimed.It is possible however, to re-aim the headlamps asdescribed in the following procedure.

The vehicle should be properly prepared as follows:

• The vehicle should be placed so the headlamps are25 ft. (7.6 m) from a light colored wall or other flatsurface.

• The vehicle must have all four tires on a perfectlylevel surface which is level all the way to the wallor other flat surface.

• The vehicle should be placed so it is perpendicularto the wall or other flat surface.

• The vehicle should not have any snow, ice ormud on it.

• The vehicle should be fully assembled and all otherwork stopped while headlamp aiming is being done.

• The vehicle should be normally loaded with afull tank of fuel and one person or 160 lbs (75 kg) onthe driver’s seat.

• Tires should be properly inflated.

Headlamp aiming is done with the vehicle’s low-beamheadlamps. The high-beam headlamps will be correctlyaimed if the low-beam headlamps are aimed properly.

The vertical headlamp aiming screws are located underthe hood near the headlamps.

The adjustment screw can be turned with a 6 mmsocket wrench.

5-45

To adjust the vertical aim on the headlamps, do thefollowing:

1. Find the aim dot on the lens of the low-beam lamp.

2. Measure the distance from the ground to the aimdot on the lamp. Record the distance.

3. At the wall or other flat surface, measure from theground upward the recorded distance from Step 2and draw or tape a horizontal line the width ofthe vehicle.

4. Turn on the low-beam headlamps and place apiece of cardboard or equivalent in front of theheadlamp not being aimed. This should allow onlythe beam of light from the headlamp beingaimed to be seen on the flat surface.

Notice: Do not cover a headlamp to improve beamcut-off when aiming. Covering a headlamp maycause excessive heat build-up which may causedamage to the headlamp.

5-46

5. Turn the vertical aiming screw until the headlampbeam is aimed to the horizontal tape line. The topedge of the cut-off should be positioned at thebottom edge of the horizontal tape line.

6. Repeat Steps 4 and 5 for the opposite headlamp.

Bulb ReplacementFor the proper type of replacement bulbs, seeReplacement Bulbs on page 5-53.

For any bulb changing procedure not listed in thissection, contact your dealer.

Halogen Bulbs

{CAUTION:

Halogen bulbs have pressurized gas insideand can burst if you drop or scratch the bulb.You or others could be injured. Be sure to readand follow the instructions on the bulbpackage.

5-47

Headlamps, Front Turn Signal,Sidemarker, and Parking Lamps

A. Front Turn Signal/Parking LampB. SidemarkerC. Headlamp

To replace one of these bulbs, do the following:

1. Open the hood. See Hood Release on page 5-11for more information.

2. Remove the two hex bolts from the headlampassembly.

3. Remove the two plastic fasteners from the fascia.

4. Pull the front fascia back.You may need someone else to assist you withSteps 3 and 4.

5-48

5. Pull the headlamp assembly up on an angle andtowards the radiator to remove.

6. Disconnect the bulb base from the wiring harnessby lifting the plastic locking tab.

7. To replace a headlamp bulb, do the following:7.1. Disconnect the wiring harness from the

bulb socket.7.2. Remove the black retainer by turning it

counterclockwise.

8. Turn the bulb socket for the headlamp, front turnsignal or parking lamp counterclockwise to remove.For the sidemarker bulb, you will need to us atool to assist in turning the bulb socket.

9. Pull the old bulb out of the socket.

10. Install a new bulb.

11. Reinstall the bulb assembly by reversingSteps 1 through 8.When reinstalling the headlamp assembly, firstensure that the wiring harness is in its originalposition. If not, the headlamp assembly will not fitcorrectly.You will also need to line up the two tabs on thebottom of the assembly that fit into two slots in theheadlamp assembly bracket.

Center High-Mounted Stoplamp(CHMSL)To replace a CHMSL bulb, do the following:

1. Open the trunk. See Trunk on page 2-10 for moreinformation.

2. Locate the CHMSL bulb assembly in the trunk lid.

3. Depress the plastic tabs to release the bulbassembly.

5-49

4. Pull the bulb assembly down to access the bulbs.

5. Remove the bulb by pulling it straight out.


7. Align the tabs in the bulb assembly with theassembly in the trunk lid. Push the bulb assemblyback into place until it snaps in. You may needto use the tool to guide the tabs into the assembly.

Taillamps and Turn SignalLamps (Coupe)

To replace a taillamp or rear turn signal bulb, do thefollowing:


2. Remove the fastener which holds down thetrunk trim.

3. Disconnect the wiring harness by lifting up on thetab to release and pull it straight out.

4. Remove the taillamp bulb socket from the assemblyby turning it counterclockwise.

5-50



7. Reverse Steps 1 through 6 to reinstall the taillampassembly.

Taillamps, Turn Signal, Stoplampsand Back-up Lamps (Sedan)To replace one of these bulbs, do the following:


2. Remove the fastener which holds down the trunktrim. Once you have removed the trim, there willbe one more fastener to remove.

3. Remove the outer two screws from the taillampassembly.

4. Disconnect the wiring harness by lifting up on thetab to release and pull it straight out.

5. Remove the taillamp from the quarter panel.

A. SidemarkerB. Stoplamp/Turn Signal/TaillampC. Back-up

6. Locate the bulb you wish to change

7. Remove the taillamp bulb socket from the assemblyby turning it counterclockwise.



10. Reverse Steps 1 through 6 to reinstall the taillampassembly.

5-51

Back-Up Lamps

To replace a back-up lamp bulb, do the following:


2. Locate the back-up lamp bulb assembly in thetrunk lid.

3. Remove the bulb socket by turning itcounterclockwise.On vehicles that have a back-up lamp cover, firstremove it by depressing the tab at the top.

4. Pull out the old bulb.


6. Reinstall the bulb socket by aligning the tabs andturning it clockwise to secure.

5-52

Replacement BulbsExterior Lamps Bulb Number

Back-Up Lamps 921Center High-MountedStoplamp (CHMSL) 912

Front Parking/Turn Signal Lamps 3157KXHalogen Headlamps,High/Low-Beam 9007 LL

Sidemarker 194Stoplamp, Taillamp and TurnSignal Lamps 3057KX

For replacement bulbs not listed here, contact yourdealer.

Windshield Wiper BladeReplacementWindshield wiper blades should be inspected for wearor cracking. See Scheduled Maintenance on page 6-4for more information on wiper blade inspection.

Replacement blades come in different types and areremoved in different ways. For proper type and length,see Normal Maintenance Replacement Parts onpage 6-14. Here is how to remove the wiper blades:

1. Pull the windshield wiper arm away from thewindshield.

2. Push the release lever and slide the wiper assemblytoward the driver’s side of the vehicle.

3. Install a new blade by reversing Steps 1 and 2.

5-53

TiresYour new vehicle comes with high-quality tires made bya leading tire manufacturer. If you ever have questionsabout your tire warranty and where to obtain service,see your GM Warranty booklet for details. For additionalinformation refer to the tire manufacturer’s bookletincluded with your vehicle’s owner manual.

{CAUTION:

• Poorly maintained and improperly usedtires are dangerous.

• Overloading your tires can causeoverheating as a result of too muchfriction. You could have an air-out and aserious accident. See Loading YourVehicle on page 4-31.



• Underinflated tires pose the same dangeras overloaded tires. The resulting accidentcould cause serious injury. Check all tiresfrequently to maintain the recommendedpressure. Tire pressure should be checkedwhen your tires are cold.

• Overinflated tires are more likely to becut, punctured, or broken by a suddenimpact — such as when you hit a pothole.Keep tires at the recommended pressure.

• Worn, old tires can cause accidents.If your tread is badly worn, or if your tireshave been damaged, replace them.

See Inflation - Tire Pressure on page 5-61 forinflation pressure adjustment for high speeddriving.

5-54

Low-Profile Performance TireIf your vehicle has 215/45R18 size tires, they areclassified as low-profile performance tires. These tiresare designed for very responsive driving on wet ordry pavement. You may also notice more road noisewith low-profile performance tires and that they tend towear faster.

Notice: If your vehicle has low-profile tires, theyare more susceptible to damage from road hazardsor curb impact than standard profile tires. Tireand/or wheel assembly damage can occur whencoming into contact with road hazards like,potholes, or sharp edged objects, or when slidinginto a curb. Your GM warranty does not coverthis type of damage. Keep tires set to the correctinflation pressure and, when possible avoid contactwith curbs, potholes, and other road hazards.

For cold weather driving conditions, you may prefer toget tires designed for snow or ice. See your dealer fordetails regarding winter tire availability and proper tireselection. Also, see Buying New Tires on page 5-64.

If you choose to use winter tires:

• Use tires of the same brand and tread type on allfour wheel positions.

• Use only radial ply tires of the same size, load range,and speed rating as your original equipment tires.

Winter tires with the same speed rating as your originalequipment tires may not be available for H, V, Wand ZR speed rated tires. If you choose winter tires witha lower speed rating, never exceed the tire’s maximumspeed capability.

5-55

Tire Sidewall LabelingUseful information about a tire is molded into itssidewall. The examples below show a typical passengervehicle tire and a compact spare tire sidewall.

(A) Tire Size: The tire size is a combination of lettersand numbers used to define a particular tire’s width,height, aspect ratio, construction type and servicedescription. See the “Tire Size” illustration later in thissection for more detail.

(B) TPC Spec (Tire Performance CriteriaSpecification): Original equipment tires designed toGM’s specific tire performance criteria have a TPCspecification code molded onto the sidewall. GM’s TPCspecifications meet or exceed all federal safetyguidelines. If your vehicle has 205/55R16 size tires,they meet the GM TPC Spec rating, but the TPC Speccode has not been molded onto the tire’s sidewall.(C) DOT (Department of Transportation): TheDepartment of Transportation (DOT) code indicates thatthe tire is in compliance with the U.S. Department ofTransportation Motor Vehicle Safety Standards.(D) Tire Identification Number (TIN): The letters andnumbers following DOT (Department of Transportation)code is the Tire Identification Number (TIN). The TINshows the manufacturer and plant code, tire size, anddate the tire was manufactured. The TIN is molded ontoboth sides of the tire, although only one side may havethe date of manufacture.(E) Tire Ply Material: The type of cord and number ofplies in the sidewall and under the tread.(F) Uniform Tire Quality Grading (UTQG): Tiremanufacturers are required to grade tires based on threeperformance factors: treadwear, traction andtemperature resistance. For more information seeUniform Tire Quality Grading on page 5-67.(G) Maximum Cold Inflation Load Limit: Maximumload that can be carried and the maximum pressureneeded to support that load.

Passenger (P-Metric) Tire Example

5-56

(A) Temporary Use Only: The compact spare tire ortemporary use tire has a tread life of approximately3,000 miles (5 000 km) and should not be drivenat speeds over 65 mph (105 km/h). The compact sparetire is for emergency use when a regular road tire haslost air and gone flat. If your vehicle has a compactspare tire, see Compact Spare Tire on page 5-83 and Ifa Tire Goes Flat on page 5-70.

(B) Tire Ply Material: The type of cord and number ofplies in the sidewall and under the tread.

(C) Tire Identification Number (TIN): The lettersand numbers following the DOT (Department ofTransportation) code is the Tire IdentificationNumber (TIN). The TIN shows the manufacturer andplant code, tire size, and date the tire was manufactured.The TIN is molded onto both sides of the tire, althoughonly one side may have the date of manufacture.

(D) Maximum Cold Inflation Load Limit: Maximumload that can be carried and the maximum pressureneeded to support that load.

(E) Tire Inflation: The temporary use tire or compactspare tire should be inflated to 60 psi (420 kPa).For more information on tire pressure and inflation seeInflation - Tire Pressure on page 5-61.

(F) Tire Size: A combination of letters and numbersdefine a tire’s width, height, aspect ratio, constructiontype and service description. The letter T as thefirst character in the tire size means the tire is fortemporary use only.

(G) TPC Spec (Tire Performance CriteriaSpecification): Original equipment tires designed toGM’s specific tire performance criteria have a TPCspecification code molded onto the sidewall. GM’s TPCspecifications meet or exceed all federal safetyguidelines.

Compact Spare Tire Example

5-57

Tire SizeThe following illustration shows an example of a typicalpassenger vehicle tire size.

(A) Passenger (P-Metric) Tire: The United Statesversion of a metric tire sizing system. The letter P asthe first character in the tire size means a passengervehicle tire engineered to standards set by the U.S. Tireand Rim Association. A tire size without the letter Pas the first character is certified to European standards.

(B) Tire Width: The three-digit number indicates thetire section width in millimeters from sidewall to sidewall.

(C) Aspect Ratio: A two-digit number that indicatesthe tire height-to-width measurements. For example,if the tire size aspect ratio is 60, as shown in item C ofthe illustration, it would mean that the tire’s sidewallis 60 percent as high as it is wide.

(D) Construction Code: A letter code is used toindicate the type of ply construction in the tire. Theletter R means radial ply construction; the letter D meansdiagonal or bias ply construction; and the letter B meansbelted-bias ply construction.

(E) Rim Diameter: Diameter of the wheel in inches.

(F) Service Description: These characters representthe load range and speed rating of the tire. The loadindex represents the load carry capacity a tire is certifiedto carry. The load index can range from 1 to 279.The speed rating is the maximum speed a tire is certifiedto carry a load. Speed ratings range from A to Z.

Tire Terminology and Definitions

Air Pressure: The amount of air inside the tire pressingoutward on each square inch of the tire. Air pressureis expressed in pounds per square inch (psi) orkilopascal (kPa).

Accessory Weight: This means the combined weightof optional accessories. Some examples of optionalaccessories are, automatic transmission, power steering,power brakes, power windows, power seats, and airconditioning.

Aspect Ratio: The relationship of a tire’s height toits width.

5-58

Belt: A rubber coated layer of cords that is locatedbetween the plies and the tread. Cords may be madefrom steel or other reinforcing materials.

Bead: The tire bead contains steel wires wrapped bysteel cords that hold the tire onto the rim.

Bias Ply Tire: A pneumatic tire in which the plies arelaid at alternate angles less than 90 degrees to thecenterline of the tread.

Cold Inflation Pressure: The amount of air pressure ina tire, measured in pounds per square inch (psi) orkilopascals (kPa) before a tire has built up heat fromdriving. See Inflation - Tire Pressure on page 5-61.

Curb Weight: This means the weight of a motor vehiclewith standard and optional equipment including themaximum capacity of fuel, oil and coolant, but withoutpassengers and cargo.

DOT Markings: A code molded into the sidewall of atire signifying that the tire is in compliance with theU.S. Department of Transportation (DOT) motor vehiclesafety standards. The DOT code includes the TireIdentification Number (TIN), an alphanumeric designatorwhich can also identify the tire manufacturer, productionplant, brand and date of production.

GVWR: Gross Vehicle Weight Rating, see LoadingYour Vehicle on page 4-31.

GAWR FRT: Gross Axle Weight Rating for the frontaxle, see Loading Your Vehicle on page 4-31.

GAWR RR: Gross Axle Weight Rating for the rear axle,see Loading Your Vehicle on page 4-31.

Intended Outboard Sidewall: The side of anasymmetrical tire, that must always face outward whenmounted on a vehicle.

Kilopascal (kPa): The metric unit for air pressure.

Light Truck (LT-Metric) Tire: A tire used on light dutytrucks and some multipurpose passenger vehicles.

Load Index: An assigned number ranging from1 to 279 that corresponds to the load carrying capacityof a tire.

Maximum Inflation Pressure: The maximum airpressure to which a cold tire may be inflated. Themaximum air pressure is molded onto the sidewall.

Maximum Load Rating: The load rating for a tire at themaximum permissible inflation pressure for that tire.

Maximum Loaded Vehicle Weight: The sum of curbweight; accessory weight; vehicle capacity weight;and production options weight.

Normal Occupant Weight: The number of occupants avehicle is designed to seat multiplied by 150 lbs (68 kg).See Loading Your Vehicle on page 4-31.

5-59

Occupant Distribution: Designated seating positions.

Outward Facing Sidewall: The side of anasymmetrical tire that has a particular side that facesoutward when mounted on a vehicle. The side of the tirethat contains a whitewall, bears white lettering, orbears manufacturer, brand, and/or model name moldingthat is higher or deeper than the same moldings onthe other sidewall of the tire.

Passenger (P-Metric) Tire: A tire used on passengercars and some light duty trucks and multipurposevehicles.

Recommended Inflation Pressure: Vehiclemanufacturer’s recommended tire inflation pressure andshown on the tire placard. See Inflation - Tire Pressureon page 5-61 and Loading Your Vehicle on page 4-31.

Radial Ply Tire: A pneumatic tire in which the ply cordsthat extend to the beads are laid at 90 degrees to thecenterline of the tread.

Rim: A metal support for a tire and upon which the tirebeads are seated.

Sidewall: The portion of a tire between the tread andthe bead.

Speed Rating: An alphanumeric code assigned to atire indicating the maximum speed at which a tirecan operate.

Traction: The friction between the tire and the roadsurface. The amount of grip provided.

Tread: The portion of a tire that comes into contactwith the road.

Treadwear Indicators: Narrow bands, sometimescalled wear bars, that show across the tread of a tirewhen only 1/16 inch (1.6 mm) of tread remains.See When It Is Time for New Tires on page 5-64.

UTQGS (Uniform Tire Quality Grading Standards):A tire information system that provides consumerswith ratings for a tire’s traction, temperature, andtreadwear. Ratings are determined by tire manufacturersusing government testing procedures. The ratings aremolded into the sidewall of the tire. See UniformTire Quality Grading on page 5-67.

Vehicle Capacity Weight: The number of designatedseating positions multiplied by 150 lbs (68 kg) plusthe rated cargo load. See Loading Your Vehicleon page 4-31.

5-60

Vehicle Maximum Load on the Tire: Load on anindividual tire due to curb weight, accessory weight,occupant weight, and cargo weight.

Vehicle Placard: A label permanently attached to avehicle showing the vehicle’s capacity weight andthe original equipment tire size and recommendedinflation pressure. See “Tire and Loading InformationLabel” under Loading Your Vehicle on page 4-31.

Inflation - Tire PressureTires need the correct amount of air pressure to operateeffectively.

Notice: Do not let anyone tell you thatunder-inflation or over-inflation is all right. It is not.If your tires do not have enough air (under-inflation),you can get the following:

• Too much flexing

• Too much heat

• Tire overloading

• Premature or irregular wear

• Poor handling

• Reduced fuel economy

If your tires have too much air (over-inflation), youcan get the following:

• Unusual wear

• Poor handling

• Rough ride

• Needless damage from road hazards

A Tire and Loading Information label is attached to thevehicle’s center pillar, below the driver’s door latch.This label lists your vehicle’s original equipment tiresand their recommended cold tire inflation pressures.The recommended cold tire inflation pressure, shownon the label, is the minimum amount of air pressureneeded to support your vehicle’s maximum load carryingcapacity.

For additional information regarding how much weightyour vehicle can carry, and an example of the tire andloading information label, see Loading Your Vehicleon page 4-31. How you load your vehicle affects vehiclehandling and ride comfort, never load your vehiclewith more weight than it was designed to carry.

5-61

When to CheckCheck your tires once a month or more. Do not forgetto check the compact spare tire, it should be at60 psi (420 kPa). For additional information regardingthe compact spare tire, see Compact Spare Tireon page 5-83.

How to CheckUse a good quality pocket-type gage to check tirepressure. You cannot tell if your tires are properlyinflated simply by looking at them. Radial tires may lookproperly inflated even when they are under-inflated.Check the tire’s inflation pressure when the tires are cold.Cold means your vehicle has been sitting for at leastthree hours or driven no more than 1 mile (1.6 km).

Remove the valve cap from the tire valve stem. Pressthe tire gage firmly onto the valve to get a pressuremeasurement. If the cold tire inflation pressure matchesthe recommended pressure on the Tire and LoadingInformation label, no further adjustment is necessary.If the inflation pressure is low, add air until you reach therecommended amount.

If you overfill the tire, release air by pushing on themetal stem in the center of the tire valve. Recheck thetire pressure with the tire gage.

Be sure to put the valve caps back on the valve stems.They help prevent leaks by keeping out dirt andmoisture.

High Speed Operation

{CAUTION:

Driving at high speeds, 100 mph (160 km/h) orhigher, puts an additional strain on tires.Sustained high-speed driving causesexcessive heat build up and can cause suddentire failure. You could have a crash and you orothers could be killed. Some high-speed ratedtires require inflation pressure adjustment forhigh speed operation. When speed limits androad conditions are such that a vehicle can bedriven at high speeds, make sure the tires arerated for high speed operation, in excellentcondition, and set to the correct cold tireinflation pressure for the vehicle load.

If your vehicle has 215/45R18 size tires, set the cold tireinflation pressure to 35 psi (241 kPa) for the front andrear tires, when operating your vehicle under high-speedconditions. When you end high-speed driving return thetires to the cold inflation pressure shown on the tireand loading information label.

5-62

Tire Inspection and RotationTires should be rotated every 5,000 to 8,000 miles(8 000 to 13 000 km).

Any time you notice unusual wear, rotate your tires assoon as possible and check wheel alignment. Alsocheck for damaged tires or wheels. See When It Is Timefor New Tires on page 5-64 and Wheel Replacementon page 5-68 for more information.

The purpose of regular rotation is to achieve moreuniform wear for all tires on the vehicle. The first rotationis the most important. See Scheduled Maintenanceon page 6-4.

When rotating your tires, always use the correct rotationpattern shown here.

Do not include the compact spare tire in your tirerotation.

After the tires have been rotated, adjust the front andrear inflation pressures as shown on the Tire andLoading Information label.

Make certain that all wheel nuts are properly tightened.See “Wheel Nut Torque” under Capacities andSpecifications on page 5-102.

{CAUTION:

Rust or dirt on a wheel, or on the parts towhich it is fastened, can make wheel nutsbecome loose after a time. The wheel couldcome off and cause an accident. When youchange a wheel, remove any rust or dirt fromplaces where the wheel attaches to the vehicle.In an emergency, you can use a cloth or apaper towel to do this; but be sure to use ascraper or wire brush later, if needed, to get allthe rust or dirt off. See Changing a Flat Tire onpage 5-71.

5-63

When It Is Time for New Tires

One way to tell whenit is time for new tiresis to check the treadwearindicators, which willappear when yourtires have only1/16 inch (1.6 mm) orless of tread remaining.

You need a new tire if any of the following statementsare true:• You can see the indicators at three or more places

around the tire.• You can see cord or fabric showing through the

tire’s rubber.• The tread or sidewall is cracked, cut, or snagged

deep enough to show cord or fabric.• The tire has a bump, bulge, or split.• The tire has a puncture, cut or other damage that

cannot be repaired well because of the size orlocation of the damage.

Buying New TiresGM has developed and matched specific tires for yourvehicle. The original equipment tires installed on yourvehicle, when it was new, were designed to meetGeneral Motors Tire Performance Criteria Specification(TPC spec) system rating. If you need replacementtires, GM strongly recommends that you get tires withthe same TPC Spec rating. This way, your vehiclewill continue to have tires that are designed to give thesame performance and vehicle safety, during normaluse, as the original tires.

GM’s exclusive TPC Spec system considers over adozen critical specifications that impact the overallperformance of your vehicle, including brake systemperformance, ride and handling, traction control, and tirepressure monitoring performance. GM’s TPC Specnumber is molded onto the tire’s sidewall by the tiremanufacturer. If the tires have an all-season treaddesign, the TPC spec number will be followed by an MSfor mud and snow. See Tire Sidewall Labeling onpage 5-56 for additional information.

5-64

Tire size 205/55R16 91 H, used on some vehicles, meetsthe General Motors Tire Performance CriteriaSpecification (TPC Spec) rating, but the TPC Spec codehas not been molded onto the tire’s sidewall. If yourvehicle has these tires, and you need to replace them,you can still get these TPC Spec rated tires by askingyour GM dealer. Your GM dealer can order these tires bypart number. This way, your vehicle will continue to givethe proper endurance, handling, traction, and ride as theoriginal tires.Winter tires with the same speed rating as your originalequipment tires may not be available for H, V, W, Y,and ZR speed rated tires. If you choose winter tires witha lower speed rating, never exceed the tire’s maximumspeed capability.

{CAUTION:

Mixing tires could cause you to lose controlwhile driving. If you mix tires of different sizes,brands, or types (radial and bias-belted tires),the vehicle may not handle properly, and youcould have a crash. Using tires of differentsizes, brands, or types may also causedamage to your vehicle. Be sure to use thecorrect size, brand, and type of tires on allwheels. It is all right to drive with yourcompact spare temporarily, as it wasdeveloped for use on your vehicle. SeeCompact Spare Tire on page 5-83.

5-65

{CAUTION:

If you use bias-ply tires on your vehicle, thewheel rim flanges could develop cracks aftermany miles of driving. A tire and/or wheelcould fail suddenly, causing a crash. Use onlyradial-ply tires with the wheels on your vehicle.

If you must replace your vehicle’s tires with those thatdo not have a TPC Spec number, make sure theyare the same size, load range, speed rating, andconstruction type (radial and bias-belted tires) as yourvehicle’s original tires.

Your vehicle’s original equipment tires are listed onthe Tire and Loading Information Label. This labelis attached to the vehicle’s center pillar (B-pillar).See Loading Your Vehicle on page 4-31, for moreinformation about the Tire and Loading InformationLabel and its location on your vehicle.

Different Size Tires and WheelsIf you add wheels or tires that are a different size thanyour original equipment wheels and tires, this mayaffect the way your vehicle performs, including itsbraking, ride and handling characteristics, stability andresistance to rollover. Additionally, if your vehicle haselectronic systems such as, antilock brakes; tractioncontrol; and electronic stability control, the performanceof these systems can be affected.

{CAUTION:

If you add different sized wheels, your vehiclemay not provide an acceptable level ofperformance and safety if tires notrecommended for those wheels are selected.You may increase the chance that you willcrash and suffer serious injury. Only useGM specific wheel and tire systems developedfor your vehicle, and have them properlyinstalled by a GM certified technician.

See Buying New Tires on page 5-64 and Accessoriesand Modifications on page 5-3 for additional information.

5-66

Uniform Tire Quality GradingQuality grades can be found where applicable on thetire sidewall between tread shoulder and maximumsection width. For example:

Treadwear 200 Traction AA Temperature AThe following information relates to the systemdeveloped by the United States National HighwayTraffic Safety Administration, which grades tires bytreadwear, traction and temperature performance.(This applies only to vehicles sold in the United States.)The grades are molded on the sidewalls of mostpassenger car tires. The Uniform Tire Quality Gradingsystem does not apply to deep tread, winter-typesnow tires, space-saver or temporary use spare tires,tires with nominal rim diameters of 10 to 12 inches(25 to 30 cm), or to some limited-production tires.

While the tires available on General Motors passengercars and light trucks may vary with respect to thesegrades, they must also conform to federal safetyrequirements and additional General Motors TirePerformance Criteria (TPC) standards.

TreadwearThe treadwear grade is a comparative rating based onthe wear rate of the tire when tested under controlledconditions on a specified government test course.For example, a tire graded 150 would wear one anda half (1.5) times as well on the government course asa tire graded 100. The relative performance of tiresdepends upon the actual conditions of their use,however, and may depart significantly from the normdue to variations in driving habits, service practices anddifferences in road characteristics and climate.

Traction – AA, A, B, CThe traction grades, from highest to lowest, are AA, A,B, and C. Those grades represent the tire’s abilityto stop on wet pavement as measured under controlledconditions on specified government test surfaces ofasphalt and concrete. A tire marked C may have poortraction performance. Warning: The traction gradeassigned to this tire is based on straight-ahead brakingtraction tests, and does not include acceleration,cornering, hydroplaning, or peak traction characteristics.

5-67

Temperature – A, B, CThe temperature grades are A (the highest), B, and C,representing the tire’s resistance to the generationof heat and its ability to dissipate heat when testedunder controlled conditions on a specified indoorlaboratory test wheel. Sustained high temperature cancause the material of the tire to degenerate and reducetire life, and excessive temperature can lead to suddentire failure. The grade C corresponds to a level ofperformance which all passenger car tires mustmeet under the Federal Motor Vehicle SafetyStandard No. 109. Grades B and A represent higherlevels of performance on the laboratory test wheel thanthe minimum required by law.

Warning: The temperature grade for this tire isestablished for a tire that is properly inflated andnot overloaded. Excessive speed, underinflation,or excessive loading, either separately or in combination,can cause heat buildup and possible tire failure.

Wheel Alignment and Tire BalanceThe tires and wheels on your vehicle were alignedand balanced carefully at the factory to give you thelongest tire life and best overall performance.Adjustments to wheel alignment and tire balancing willnot be necessary on a regular basis. However, if younotice unusual tire wear or your vehicle pulling toone side or the other, the alignment may need to bechecked. If you notice your vehicle vibrating whendriving on a smooth road, your tires and wheels mayneed to be rebalanced. See your dealer for properdiagnosis.

Wheel ReplacementReplace any wheel that is bent, cracked or badlyrusted or corroded. If wheel nuts keep coming loose,the wheel, wheel bolts and wheel nuts should bereplaced. If the wheel leaks air, replace it (except somealuminum wheels, which can sometimes be repaired).See your dealer if any of these conditions exist.

5-68

Your dealer will know the kind of wheel you need.

Each new wheel should have the same load-carryingcapacity, diameter, width, offset and be mountedthe same way as the one it replaces.

If you need to replace any of your wheels, wheelbolts or wheel nuts, replace them only with newGM original equipment parts. This way, you will besure to have the right wheel, wheel bolts and wheelnuts for your vehicle.

{CAUTION:

Using the wrong replacement wheels, wheelbolts, or wheel nuts on your vehicle can bedangerous. It could affect the braking andhandling of your vehicle, make your tires loseair and make you lose control. You could havea collision in which you or others could beinjured. Always use the correct wheel, wheelbolts and wheel nuts for replacement.

Notice: The wrong wheel can also cause problemswith bearing life, brake cooling, speedometer orodometer calibration, headlamp aim, bumper height,vehicle ground clearance, and tire or tire chainclearance to the body and chassis.

See Changing a Flat Tire on page 5-71 for moreinformation.

Used Replacement Wheels

{CAUTION:

Putting a used wheel on your vehicle isdangerous. You cannot know how it has beenused or how far it has been driven. It could failsuddenly and cause a crash. If you have toreplace a wheel, use a new GM originalequipment wheel.

5-69

Tire Chains

{CAUTION:

If your vehicle has 205/55R16, P205/55R16,P205/50R17 or 215/45R18 size tires, do not usetire chains. There is not enough clearance.

Tire chains used on a vehicle without theproper amount of clearance can cause damageto the brakes, suspension, or other vehicleparts. The area damaged by the tire chainscould cause you to lose control of your vehicleand you or others may be injured in a crash.Use another type of traction device only if itsmanufacturer recommends it for use on yourvehicle and tire size combination, and roadconditions. Follow that manufacturer’sinstructions. To help avoid damage to yourvehicle, drive slowly, readjust or remove thedevice if it is contacting your vehicle, and donot spin your vehicle’s wheels.

If you do find traction devices that will fit,install them on the front tires.

Notice: If your vehicle has a tire size other than205/55R16, P205/55R16, P205/50R17 or 215/45R18size tires, use tire chains only where legal and onlywhen you must. Use only SAE Class S-type chainsthat are the proper size for your tires. Install them onthe front tires and tighten them as tightly aspossible with the ends securely fastened. Driveslowly and follow the chain manufacturer’sinstructions. If you can hear the chains contactingyour vehicle, stop and retighten them. If the contactcontinues, slow down until it stops. Driving toofast or spinning the wheels with chains on willdamage your vehicle.

If a Tire Goes FlatIt is unusual for a tire to blowout while you are driving,especially if you maintain your vehicle’s tires properly.If air goes out of a tire, it is much more likely to leak outslowly. But if you should ever have a blowout, here area few tips about what to expect and what to do:

If a front tire fails, the flat tire will create a drag thatpulls the vehicle toward that side. Take your foot off theaccelerator pedal and grip the steering wheel firmly.Steer to maintain lane position, and then gently brake toa stop well out of the traffic lane.

5-70

A rear blowout, particularly on a curve, acts much like askid and may require the same correction you woulduse in a skid. In any rear blowout remove your foot fromthe accelerator pedal. Get the vehicle under control bysteering the way you want the vehicle to go. It maybe very bumpy and noisy, but you can still steer. Gentlybrake to a stop, well off the road if possible.

{CAUTION:

Lifting a vehicle and getting under it to domaintenance or repairs is dangerous withoutthe appropriate safety equipment and training.The jack provided with your vehicle isdesigned only for changing a flat tire. If it isused for anything else, you or others could bebadly injured or killed if the vehicle slips offthe jack. Use the jack provided with yourvehicle only for changing a flat tire.

If a tire goes flat, the next part shows how to use thejacking equipment to change a flat tire safely.

Changing a Flat TireIf a tire goes flat, avoid further tire and wheel damageby driving slowly to a level place. Turn on yourhazard warning flashers.

{CAUTION:

Changing a tire can be dangerous. The vehiclecan slip off the jack and roll over or fall on youor other people. You and they could be badlyinjured or even killed. Find a level place tochange your tire. To help prevent the vehiclefrom moving:

1. Set the parking brake firmly.

2. Put an automatic transaxle shift lever inPARK (P), or shift a manual transaxle toFIRST (1) or REVERSE (R).

3. Turn off the engine and do not restartwhile the vehicle is raised.

4. Do not allow passengers to remain in thevehicle.

To be even more certain the vehicle will notmove, you should put blocks at the front andrear of the tire farthest away from the onebeing changed. That would be the tire on theother side, at the opposite end of the vehicle.

5-71

When you have a flat tire, use the following example asa guide to assist you in the placement of wheel blocks.

The following information will tell you how to use thejack and change a tire.

Removing the Spare Tire and ToolsThe equipment you will need is located in the trunk.

Base Models1. Open the trunk. See Trunk on page 2-10 for more

information.

2. Lift the trunk liner to access the spare tireand tools.

5-72

A. CoverB. RetainerC. Spare TireD. Wing NutE. Jack and Wheel WrenchF. Bolt

3. Remove the retainer (B) that holds down the sparetire. See Compact Spare Tire on page 5-83

4. Remove the spare tire (C) by placing your hands atthe four and eight o’clock positions. Gently pull it upand out of the trunk.

5. Remove the wing nut (D) that holds the jack andremove the jack and wheel wrench (E).

5-73

Uplevel Models1. Open the trunk. See Trunk on page 2-10 for more

information.

2. Lift the trunk liner to access the spare tireand tools.

5-74

A. RetainerB. Jack and Wheel WrenchC. Spare TireD. Foam SupportE. Bolt

3. Remove the retainer (A) that holds down the jack,wheel wrench (B) and spare tire (C).

4. Remove the spare tire by placing your hands at thefour and eight o’clock positions. Gently pull it upand out of the trunk.

The tools you will be using include the jack (A) andwheel wrench (B).

You will need to turn the plastic wheel nutcounterclockwise to loosen the wheel wrench fromthe jack.

5-75

Press the button and then pull on the end of the wheelwrench to extend the handle.

Removing the Flat Tire andInstalling the Spare Tire

1. If your vehicle is equipped with plastic wheelcovers, use the wheel wrench to loosen the plasticwheel nut caps.Once you have loosened the plastic wheel nut capswith the wheel wrench, you can finish looseningthem with your fingers. The plastic nut caps do notcome off.

5-76

2. Using the flat end of the wheel wrench, pry alongthe edge of the wheel cover until it comes off.If your vehicle has aluminum wheels, first removethe center cap with your finger or the wheel wrench.

3. Use the wheel wrench to loosen all the wheel nuts.Do not remove them yet.

Notice: Make sure that the jack lift head is in thecorrect position or you may damage your vehicle.The repairs would not be covered by your warranty.

4. Position the jack lift head at the jack locationnearest the flat tire. The front location is about8 inches (20 cm) rearward from the front wheelopening. The rear location is about 4 inches (10 cm)forward of the rear wheel opening.

5. Raise the jack head until it fits firmly in the vehicle’sframe, where the notch is located, nearest theflat tire.

6. Put the compact spare tire near you.

{CAUTION:

Getting under a vehicle when it is jacked up isdangerous. If the vehicle slips off the jack youcould be badly injured or killed. Never getunder a vehicle when it is supported only bya jack.

5-77

{CAUTION:

Raising your vehicle with the jack improperlypositioned can damage the vehicle and evenmake the vehicle fall. To help avoid personalinjury and vehicle damage, be sure to fit thejack lift head into the proper location beforeraising the vehicle.

7. Raise the vehicle by turning the jack handleclockwise. Raise the vehicle far enough off theground so there is enough room for the compactspare tire to fit under the vehicle.

8. Remove all of thewheel nuts.

{CAUTION:

Rust or dirt on the wheel, or on the parts towhich it is fastened, can make the wheel nutsbecome loose after a time. The wheel couldcome off and cause an accident. When youchange a wheel, remove any rust or dirt fromthe places where the wheel attaches to thevehicle. In an emergency, you can use a clothor a paper towel to do this; but be sure to usea scraper or wire brush later, if needed, to getall the rust or dirt off.

9. Remove any rust or dirtfrom the wheel bolts,mounting surfacesand spare wheel.

10. Place the compact spare tire on the wheel-mountingsurface.

5-78

{CAUTION:

Never use oil or grease on studs or nuts.If you do, the nuts might come loose. Yourwheel could fall off, causing a seriousaccident.

11. Reinstall the wheel nuts with the rounded end ofthe nuts toward the wheel. Tighten each nut byhand until the wheel is held against the hub.

12. Lower the vehicle by turning the jack handlecounterclockwise. Lower the jack completely.

{CAUTION:

Incorrect wheel nuts or improperly tightenedwheel nuts can cause the wheel to come looseand even come off. This could lead to anaccident. Be sure to use the correct wheelnuts. If you have to replace them, be sure toget new GM original equipment wheel nuts.Stop somewhere as soon as you can and havethe nuts tightened with a torque wrench to theproper torque specification. See Capacitiesand Specifications on page 5-102 for wheel nuttorque specification.

5-79

Notice: Improperly tightened wheel nuts can leadto brake pulsation and rotor damage. To avoidexpensive brake repairs, evenly tighten the wheelnuts in the proper sequence and to the propertorque specification. See Capacities andSpecifications on page 5-102 for the wheel nuttorque specification.

13. Tighten the wheel nuts firmly in a crisscrosssequence, as shown.

Notice: Wheel covers will not fit on your compactspare. If you try to put a wheel cover on the compactspare, you could damage the cover or the spare.

Do not try to put a wheel cover on your compact sparetire. It will not fit. Store the wheel cover in the trunkuntil you have the flat tire repaired or replaced.

Storing a Flat or Spare Tireand Tools

{CAUTION:

Storing a jack, a tire, or other equipment in thepassenger compartment of the vehicle couldcause injury. In a sudden stop or collision,loose equipment could strike someone. Storeall these in the proper place.

4-Wheel Nuts 5-Wheel Nuts

5-80

A. CoverB. RetainerC. Jack and Wheel WrenchD. Stow Bolt ExtensionE. Spare TireF. Bolt

Base Model

5-81

A. CoverB. RetainerC. Jack and Wheel WrenchD. Stow Bolt ExtensionE. Spare TireF. Foam SupportG. Bolt

To store a flat or spare tire and tools, do the following:1. Remove the stow bolt extension rod and sleeve

from the jack.2. Re-attach the wheel wrench to the jack.3. Place the flat tire face down into the spare tire hub.

Avoid scraping the aluminum wheel, if equipped,on the hold-down bolt.

4. Screw the stow bolt extension rod and the sleeveinto the existing spare tire hold-down bolt.

5. Place the jack into the center of the flat tire, beingcareful not to scratch the inside of the wheel.

6. Place the smaller jack hold-down nut in a safeplace for use when you put the compact sparetire back into the trunk.

7. Remove the plastic sleeve from the stow boltextension rod. Secure the jack and road wheelusing the larger plastic retainer.

The compact spare tire is for temporary use only.Replace the compact spare with a full-size tire as soonas possible.

Uplevel Model

5-82

Compact Spare TireAlthough the compact spare tire was fully inflated whenthe vehicle was new, it can lose air after a time.Check the inflation pressure regularly. It should be60 psi (420 kPa).

After installing the compact spare on the vehicle, stopas soon as possible and make sure the spare tireis correctly inflated. The compact spare is made toperform well at speeds up to 65 mph (105 km/h)for distances up to 3,000 miles (5 000 km), so you canfinish your trip and have the full-size tire repaired orreplaced at your convenience. Of course, it is bestto replace the spare with a full-size tire as soon aspossible. The spare tire will last longer and be in goodshape in case it is needed again.

Notice: When the compact spare is installed, donot take your vehicle through an automatic car washwith guide rails. The compact spare can getcaught on the rails. That can damage the tire andwheel, and maybe other parts of your vehicle.

Do not use the compact spare on other vehicles.And do not mix the compact spare tire or wheel withother wheels or tires. They will not fit. Keep thespare tire and its wheel together.

Notice: Tire chains will not fit your compact spare.Using them can damage your vehicle and candamage the chains too. Do not use tire chains onyour compact spare.

Appearance Care

Cleaning the Inside of Your VehicleYour vehicle’s interior will continue to look its best ifit is cleaned often. Although not always visible, dust anddirt can accumulate on your upholstery. Dirt candamage carpet, fabric, leather, and plastic surfaces.Regular vacuuming is recommended to remove particlesfrom your upholstery. It is important to keep yourupholstery from becoming and remaining heavily soiled.Soils should be removed as quickly as possible. Yourvehicle’s interior may experience extremes of heatthat could cause stains to set rapidly.

5-83

Lighter colored interiors may require more frequentcleaning. Use care because newspapers and garmentsthat transfer color to your home furnishings may alsotransfer color to your vehicle’s interior.

When cleaning your vehicle’s interior, only use cleanersspecifically designed for the surfaces being cleaned.Permanent damage may result from using cleaners onsurfaces for which they were not intended. Use glasscleaner only on glass. Remove any accidentalover-spray from other surfaces immediately. To preventover-spray, apply cleaner directly to the cleaning cloth.

Notice: If you use abrasive cleaners when cleaningglass surfaces on your vehicle, you could scratchthe glass and/or cause damage to the rear windowdefogger. When cleaning the glass on yourvehicle, use only a soft cloth and glass cleaner.

Many cleaners contain solvents that may becomeconcentrated in your vehicle’s breathing space. Beforeusing cleaners, read and adhere to all safetyinstructions on the label. While cleaning your vehicle’sinterior, maintain adequate ventilation by openingyour vehicle’s doors and windows.

Dust may be removed from small buttons and knobsusing a small brush with soft bristles.

Your GM dealer has a product for cleaning yourvehicle’s glass. Should it become necessary, you canalso obtain a product from your GM dealer to removeodors from your vehicle’s upholstery.

Do not clean your vehicle using the following cleanersor techniques:

• Never use a knife or any other sharp object toremove a soil from any interior surface.

• Never use a stiff brush. It can cause damage toyour vehicle’s interior surfaces.

• Never apply heavy pressure or rub aggressivelywith a cleaning cloth. Use of heavy pressure candamage your interior and does not improve theeffectiveness of soil removal.

• Use only mild, neutral-pH soaps. Avoid laundrydetergents or dishwashing soaps with degreasers.Using too much soap will leave a residue thatleaves streaks and attracts dirt. For liquid cleaners,about 20 drops per gallon (3.78 L) of water is agood guide.

• Do not heavily saturate your upholstery whilecleaning.

• Damage to your vehicle’s interior may result fromthe use of many organic solvents such as naptha,alcohol, etc.

5-84

Fabric/CarpetUse a vacuum cleaner with a soft brush attachmentfrequently to remove dust and loose dirt. A canistervacuum with a beater bar in the nozzle may only be usedon floor carpet and carpeted floor mats. For soils, alwaystry to remove them first with plain water or club soda.Before cleaning, gently remove as much of the soil aspossible using one of the following techniques:

• For liquids: gently blot the remaining soil with a papertowel. Allow the soil to absorb into the paper toweluntil no more can be removed.

• For solid dry soils: remove as much as possible andthen vacuum.

To clean, use the following instructions:

1. Saturate a lint-free, clean white cloth with water orclub soda.

2. Wring the cloth to remove excess moisture.

3. Start on the outside edge of the soil and gently rubtoward the center. Continue cleaning, using a cleanarea of the cloth each time it becomes soiled.

4. Continue to gently rub the soiled area until thecleaning cloth remains clean.

5. If the soil is not completely removed, use a mildsoap solution and repeat the cleaning processthat was used with plain water.

If any of the soil remains, a commercial fabric cleaneror spot lifter may be necessary. When a commercialupholstery cleaner or spot lifter is to be used, testa small hidden area for colorfastness first. If the locallycleaned area gives any impression that a ringformation may result, clean the entire surface.

After the cleaning process has been completed, a papertowel can be used to blot excess moisture from thefabric or carpet.

LeatherA soft cloth dampened with water may be used toremove dust. If a more thorough cleaning is necessary,a soft cloth dampened with a mild soap solution canbe used. Allow the leather to dry naturally. Do not useheat to dry. Never use steam to clean leather. Neveruse spot lifters or spot removers on leather. Manycommercial leather cleaners and coatings that are soldto preserve and protect leather may permanentlychange the appearance and feel of your leather and arenot recommended. Do not use silicone or wax-basedproducts, or those containing organic solvents to cleanyour vehicle’s interior because they can alter theappearance by increasing the gloss in a non-uniformmanner. Never use shoe polish on your leather.

5-85

Instrument Panel, Vinyl, and OtherPlastic SurfacesA soft cloth dampened with water may be used toremove dust. If a more thorough cleaning is necessary,a clean soft cloth dampened with a mild soap solutioncan be used to gently remove dust and dirt. Never usespot lifters or removers on plastic surfaces. Manycommercial cleaners and coatings that are sold topreserve and protect soft plastic surfaces maypermanently change the appearance and feel of yourinterior and are not recommended. Do not use siliconeor wax-based products, or those containing organicsolvents to clean your vehicle’s interior because theycan alter the appearance by increasing the glossin a non-uniform manner.

Some commercial products may increase gloss on yourinstrument panel. The increase in gloss may causeannoying reflections in the windshield and even make itdifficult to see through the windshield under certainconditions.

Care of Safety BeltsKeep belts clean and dry.

{CAUTION:

Do not bleach or dye safety belts. If you do,it may severely weaken them. In a crash,they might not be able to provide adequateprotection. Clean safety belts only with mildsoap and lukewarm water.

WeatherstripsSilicone grease on weatherstrips will make them lastlonger, seal better, and not stick or squeak. Applysilicone grease with a clean cloth. During very cold,damp weather frequent application may be required.See Recommended Fluids and Lubricants on page 6-12.

5-86

Washing Your VehicleThe paint finish on the vehicle provides beauty, depth ofcolor, gloss retention, and durability.

The best way to preserve the vehicle’s finish is to keep itclean by washing it often with lukewarm or cold water.

Do not wash the vehicle in the direct rays of the sun.Use a car washing soap. Do not use strong soaps orchemical detergents. Be sure to rinse the vehicle well,removing all soap residue completely. GM-approvedcleaning products can be obtained from your dealer.See Vehicle Care/Appearance Materials on page 5-90.Do not use cleaning agents that are petroleumbased, or that contain acid or abrasives. All cleaningagents should be flushed promptly and not allowedto dry on the surface, or they could stain. Dry the finishwith a soft, clean chamois or an all-cotton towel toavoid surface scratches and water spotting.

High pressure car washes may cause water to enterthe vehicle.

Cleaning Exterior Lamps/LensesUse only lukewarm or cold water, a soft cloth and a carwashing soap to clean exterior lamps and lenses.Follow instructions under Washing Your Vehicle onpage 5-87.

Finish CareOccasional waxing or mild polishing of the vehicleby hand may be necessary to remove residue fromthe paint finish. GM-approved cleaning products canbe obtained from your dealer. See VehicleCare/Appearance Materials on page 5-90.

Notice: Machine compounding or aggressivepolishing on a basecoat/clearcoat paint finish maydamage it. Use only non-abrasive waxes andpolishes that are made for a basecoat/clearcoatpaint finish on your vehicle.

The vehicle has a “basecoat/clearcoat” paint finish.The clearcoat gives more depth and gloss to the coloredbasecoat. Always use waxes and polishes that arenon-abrasive and made for a basecoat/clearcoatpaint finish.

Foreign materials such as calcium chloride and othersalts, ice melting agents, road oil and tar, tree sap, birddroppings, chemicals from industrial chimneys, etc.,can damage the vehicle’s finish if they remain on paintedsurfaces. Wash the vehicle as soon as possible.If necessary, use non-abrasive cleaners that are markedsafe for painted surfaces to remove foreign matter.

Exterior painted surfaces are subject to aging, weather,and chemical fallout that can take their toll over a periodof years. To help keep the paint finish looking new, keepthe vehicle in a garage or covered whenever possible.

5-87

Windshield and Wiper BladesIf the windshield is not clear after using the windshieldwasher, or if the wiper blade chatters when running,wax, sap, or other material may be on the bladeor windshield.

Clean the outside of the windshield with a glass cleaningliquid or powder and water solution. The windshield isclean if beads do not form when it is rinsed with water.

Grime from the windshield will stick to the wiper bladesand affect their performance. Clean the blade bywiping vigorously with a cloth soaked in full-strengthwindshield washer solvent. Then rinse the bladewith water.

Check the wiper blades and clean them as necessary;replace blades that look worn.

Aluminum or Chrome-Plated WheelsThe vehicle may be equipped with either aluminum orchrome-plated wheels.

Keep the wheels clean using a soft clean cloth with mildsoap and water. Rinse with clean water. After rinsingthoroughly, dry with a soft clean towel. A wax may thenbe applied.

Notice: If you use strong soaps, chemicals,abrasive polishes, cleaners, brushes, or cleanersthat contain acid on aluminum or chrome-platedwheels, you could damage the surface of thewheel(s). The repairs would not be covered by yourwarranty. Use only GM-approved cleaners onaluminum or chrome-plated wheels.

The surface of these wheels is similar to the paintedsurface of your vehicle. Do not use strong soaps,chemicals, abrasive polishes, abrasive cleaners,cleaners with acid, or abrasive cleaning brushes onthem because you could damage the surface. Do notuse chrome polish on aluminum wheels.

5-88

Notice: Using chrome polish on aluminum wheelscould damage the wheels. The repairs would notbe covered by your warranty. Use chrome polish onchrome wheels only.

Use chrome polish only on chrome-plated wheels, butavoid any painted surface of the wheel, and buff offimmediately after application.

Notice: If you drive your vehicle through anautomatic car wash that has silicone carbide tirecleaning brushes, you could damage the aluminumor chrome-plated wheels. The repairs would notbe covered by your warranty. Never drive a vehicleequipped with aluminum or chrome-plated wheelsthrough an automatic car wash that uses siliconecarbide tire cleaning brushes.

Do not take your vehicle through an automatic car washthat has silicone carbide tire cleaning brushes. Thesebrushes can also damage the surface of these wheels.

TiresTo clean the tires, use a stiff brush with tire cleaner.

Notice: Using petroleum-based tire dressingproducts on your vehicle may damage the paintfinish and/or tires. When applying a tire dressing,always wipe off any overspray from all paintedsurfaces on your vehicle.

Sheet Metal DamageIf the vehicle is damaged and requires sheet metalrepair or replacement, make sure the body repair shopapplies anti-corrosion material to parts repaired orreplaced to restore corrosion protection.

Original manufacturer replacement parts will provide thecorrosion protection while maintaining the warranty.

Finish DamageAny stone chips, fractures or deep scratches in thefinish should be repaired right away. Bare metal willcorrode quickly and may develop into major repairexpense.

Minor chips and scratches can be repaired with touch-upmaterials available from your GM dealer. Larger areasof finish damage can be corrected in your GM dealer’sbody and paint shop.

5-89

Underbody MaintenanceChemicals used for ice and snow removal and dustcontrol can collect on the underbody. If these are notremoved, corrosion and rust can develop on theunderbody parts such as fuel lines, frame, floor pan,and exhaust system even though they have corrosionprotection.

At least every spring, flush these materials from theunderbody with plain water. Clean any areas where mudand debris can collect. Dirt packed in close areas ofthe frame should be loosened before being flushed.Your dealer or an underbody car washing system cando this for you.

Chemical Paint SpottingSome weather and atmospheric conditions can create achemical fallout. Airborne pollutants can fall upon andattack painted surfaces on the vehicle. This damage cantake two forms: blotchy, ring-shaped discolorations,and small, irregular dark spots etched into thepaint surface.

Although no defect in the paint job causes this, GM willrepair, at no charge to the owner, the surfaces ofnew vehicles damaged by this fallout condition within12 months or 12,000 miles (20 000 km) of purchase,whichever occurs first.

Vehicle Care/Appearance MaterialsDescription Usage

Polishing ClothWax-Treated

Interior and exteriorpolishing cloth.

Tar and Road OilRemover

Removes tar, road oil andasphalt.

Chrome Cleaner andPolish

Use on chrome orstainless steel.

White Sidewall TireCleaner

Removes soil and blackmarks from whitewalls.

Vinyl Cleaner Cleans vinyl.

Glass Cleaner Removes dirt, grime,smoke and fingerprints.

Chrome and Wire WheelCleaner

Removes dirt and grimefrom chrome wheels andwire wheel covers.

Finish Enhancer

Removes dust,fingerprints, and surfacecontaminants. Spray onwipe off.

5-90

Description Usage

Swirl Remover PolishRemoves swirl marks, finescratches and other lightsurface contamination.

Cleaner Wax Removes light scratchesand protects finish.

Foaming Tire Shine LowGloss

Cleans, shines andprotects in one easy step,no wiping necessary.

Wash Wax Concentrate

Medium foamingshampoo. Cleans andlightly waxes.Biodegradable andphosphate free.

Spot Lifter

Quickly and easilyremoves spots and stainsfrom carpets, vinyl andcloth upholstery.

Odor EliminatorOdorless spray odoreliminator used on fabrics,vinyl, leather and carpet.

Vehicle Identification

Vehicle Identification Number (VIN)

This is the legal identifier for your vehicle. It appears ona plate in the front corner of the instrument panel, onthe driver’s side. You can see it if you look through thewindshield from outside your vehicle. The VIN alsoappears on the Vehicle Certification and Service Partslabels and the certificates of title and registration.

5-91

Engine IdentificationThe eighth character in the VIN is the engine code.This code will help you identify your vehicle’s engine,specifications, and replacement parts.

Service Parts Identification LabelYou will find this label in the trunk, on the driver side,near the spare tire cover. It is very helpful if you everneed to order parts. On this label, you will find thefollowing:

• VIN

• Model designation

• Paint information

• Production options and special equipment

Be sure that this label is not removed from the vehicle.

Electrical System

Add-On Electrical EquipmentNotice: Don’t add anything electrical to yourvehicle unless you check with your dealer first.Some electrical equipment can damage your vehicleand the damage wouldn’t be covered by yourwarranty. Some add-on electrical equipment cankeep other components from working as theyshould.

Your vehicle has an airbag system. Before attempting toadd anything electrical to your vehicle, see ServicingYour Airbag-Equipped Vehicle on page 1-64.

5-92

Headlamp WiringThe headlamp wiring is protected by fuses. Should yourheadlamps fail to function, have your headlamp systemchecked right away.

Windshield Wiper FusesThe windshield wiper motor is protected by a circuitbreaker and a fuse. If the motor overheats due to heavysnow or ice, the wiper will stop until the motor cools.If the overload is caused by some electrical problem,have it fixed.

Power Windows and Other PowerOptionsFuses in the fuse block protect the power windows.When the current load is too heavy, the fuse opensprotecting the circuit until the problem is fixed.

Fuses and Circuit BreakersThe wiring circuits in your vehicle are protected fromshort circuits by a combination of fuses, circuit breakersand fusible thermal links. This greatly reduces thechance of damage caused by electrical problems.

Look at the silver-colored band inside the fuse. If theband is broken or melted, replace the fuse. Be sure youreplace a bad fuse with a new one of the identicalsize and rating.

If you ever have a problem on the road and do not havea spare fuse, you can “borrow” one that has the sameamperage. Just pick some feature of your vehicle thatyou can get along without — like the radio or cigarettelighter — and use its fuse if it is the correct amperage.Replace it as soon as you can.

There are two fuse blocks in your vehicle: the floorconsole fuse block and the engine compartmentfuse block.

5-93

Floor Console Fuse Block

The floor console fuse block is located on thepassenger’s side of the floor console under theinstrument panel. To access the fuse block, removethe panel on the side of the console.

Fuses Usage1 Fuse Puller2 Spare3 Spare4 Spare5 Spare

5-94

Fuses Usage6 Amplifier7 Cluster8 Ignition Switch, PASS-Key® III+9 Stoplamp

10 Heating, Ventilation, AirConditioning, PASS-Key® III+

11 Empty12 Spare13 Airbag14 Spare15 Windshield Wiper16 Climate Control System, Cluster17 Empty18 Empty

19 Electric Power Steering, SteeringWheel Control

20 Sunroof21 Spare

Fuses Usage22 Empty23 Audio System

24 Sensing and Diagnostic Module(Airbag)

25 Engine Control Module,Transmission Control Module

26 Door Locks27 Interior Lights28 Empty29 Power Windows

Relays Usage30 Climate Control System31 Empty32 Retained Accessory Power

5-95

Engine Compartment Fuse BlockThe engine compartment fuse block is located on the driver’s side of the vehicle. Lift off the cover to check the fuses.See Engine Compartment Overview on page 5-12 for more information on location.

2.2L Engine (L61) and 2.4L Engine (LE5)

5-96

Fuses UsageSPARES SparesBlank Not UsedBlank Not UsedRDFG Rear DefoggerCOOL/FAN2 Cooling Fan 2CRNK StarterCOOL/FAN 1 Engine Cooling FanBCM3 Body Control Module 3BCM2 Body Control Module 2FOG LP Fog LampsHORN HornRH HI BEAM Passenger’s Side High BeamLH HI BEAM Driver’s Side High BeamRH LO BEAM Passenger’s Side Low BeamLH LO BEAM Driver’s Side Low BeamBlank Not UsedFUEL PMP Fuel PumpEMISN Emissions

Fuses UsageBlank Not UsedINJ InjectorsBlank Not UsedABS Anti-lock Brake System

PCM/ECM Powertrain Control Module/EngineControl Module

EPS Electric Power SteeringAIR PMP Air PumpPRK LPS Park LampsWPR Windshield WiperIP IGN IgnitionA/C CLTCH Air Conditioning ClutchAIR SOL Air SolenoidABS2 Anti-lock Brake System 2PRK/NEUT Park, Neutral

ECM/TRANS Engine Control Module,Transmission

BCK UP Back-Up LampsTRUNK/OUTLET Trunk, Accessory Power Outlet

5-97

Fuses UsageBlank Not UsedBlank Not UsedS BAND/ONSTAR Audio, OnStar®

Blank Not UsedLTR Cigarette LighterMIR (S) MirrorsHTD SEATS Heated SeatsCNSTR VENT Canister Vent

Relays UsageRDFG Rear DefoggerCOOL/FAN2 Cooling Fan 2WPR2 Windshield Wiper 2CRNK StarterCOOL/FAN1 Cooling Fan 1FUEL PUMP Fuel PumpWPR1 Windshield Wiper 1PWR/TRN PowertrainAIR PMP Air PumpA/C CLTCH Air Conditioning ClutchAIR SOL Air SolenoidRUN/CRNK Run, Crank

5-98

Fuses UsageSPARES SparesBlank Not UsedBlank Not Used

Fuses UsageRDFG Rear DefoggerCOOL/FAN2 Cooling Fan 2CRNK Starter

Cobalt SS 2.0L L4 Supercharged Engine

5-99

Fuses UsageCOOL/FAN 1 Engine Cooling FanBCM3 Body Control Module 3BCM2 Body Control Module 2FOG LP Fog LampsHORN HornRH LO BEAM Passenger’s Side Low BeamLH LO BEAM Driver’s Side Low BeamRH HI BEAM Passenger’s Side High BeamLH HI BEAM Driver’s Side High BeamBlank Not UsedFUEL PMP Fuel PumpEMISN EmissionsBlank Not UsedINJ InjectorsBlank Not UsedABS Anti-lock Brake System

Fuses Usage

PCM/ECM Powertrain Control Module/EngineControl Module

EPS Electric Power SteeringBlank Not UsedPRK LPS Park LampsWPR Windshield WiperIP IGN IgnitionA/C CLTCH Air Conditioning ClutchAFTRCOOL AftercoolerABS2 Anti-lock Brake SystemPRK/NEUT Park, Neutral

ECM/TRANS Engine Control Module,Transmission

BCK UP Back-Up LampsTRUNK/OUTLET Trunk, Accessory Power Outlet

Blank Not Used

5-100

Fuses UsageBlank Not UsedS BAND/ONSTAR Audio, OnStar®

Blank Not UsedLTR Cigarette LighterMIR (S) MirrorsHTD SEATS Heated SeatsCNSTR VENT Canister Vent

Relays UsageRDFG Rear DefoggerCOOL/FAN2 Cooling Fan 2WPR2 Windshield Wiper 2CRNK StarterCOOL/FAN1 Cooling Fan 1FUEL PUMP Fuel PumpWPR1 Windshield Wiper 1COOLSER/PAR Series/Parallel Cooling Fan

PWR/TRN PowertrainA/C CLTCH Air Conditioning ClutchAFTRCOOL Aftercooler PumpRUN/CRNK Run, Crank

5-101

Capacities and SpecificationsThe following approximate capacities are given in English and metric conversions. Please refer to RecommendedFluids and Lubricants on page 6-12 for more information.

ApplicationCapacities

English MetricCooling System

2.0L L4 Engine Supercharged 7.4 qt 7.0 L2.2L L4 Engine 6.8 qt 6.5 L2.4L L4 Engine 7.4 qt 7.0L

Intercooler System 2.0L Engine 2.0 qt 1.9 LEngine Oil with Filter

2.2L L4 and 2.4L L4 Engines 5.0 qt 4.7 L2.0L L4 Engine Supercharged 6.0 qt 5.7 L

Fuel Tank 13.0 gal 49.2 LTransaxle, Automatic (Complete Drain and Refill) 7.0 qt 6.6 LTransaxle, Manual (Complete Drain and Refill)

2.2L L4 and 2.4L L4 Engines 1.7 qt 1.6 L2.0L L4 Engine Supercharged 1.6 qt 1.5 L

Wheel Nut Torque 100 lb ft 140 YAll capacities are approximate. When adding, be sure to fill to the appropriate level, as recommended inthis manual.

5-102

Engine SpecificationsEngine VIN Code Transaxle Spark Plug Gap

2.2L L4 F AutomaticManual 0.042 inch (1.06 mm)

2.0L L4 (Supercharged) P Manual 0.042 inch (1.06 mm)

2.4L L4 B ManualAutomatic 0.042 inch (1.06 mm)

5-103

✍ NOTES

5-104

Maintenance Schedule ......................................6-2Introduction ...................................................6-2Maintenance Requirements ..............................6-2Your Vehicle and the Environment ....................6-2Using the Maintenance Schedule ......................6-3Scheduled Maintenance ...................................6-4Additional Required Services ............................6-6Maintenance Footnotes ...................................6-7

Owner Checks and Services ............................6-8At Each Fuel Fill ............................................6-9At Least Once a Month ...................................6-9At Least Once a Year ...................................6-10Recommended Fluids and Lubricants ...............6-12Normal Maintenance Replacement Parts ..........6-14Maintenance Record .....................................6-15

Section 6 Maintenance Schedule

6-1

Maintenance Schedule

IntroductionImportant: Keep engine oil at the proper level andchange as recommended.

Have you purchased the GM Protection Plan? The Plansupplements your new vehicle warranties. See yourWarranty and Owner Assistance booklet or your dealerfor details.

Maintenance RequirementsNotice: Maintenance intervals, checks, inspections,replacement parts, and recommended fluids andlubricants as prescribed in this manual arenecessary to keep your vehicle in good workingcondition. Any damage caused by failure to followscheduled maintenance may not be covered bywarranty.

Your Vehicle and the EnvironmentProper vehicle maintenance not only helps to keepyour vehicle in good working condition, but also helpsthe environment. All recommended maintenance isimportant. Improper vehicle maintenance can even affectthe quality of the air we breathe. Improper fluid levelsor the wrong tire inflation can increase the level ofemissions from your vehicle. To help protect ourenvironment, and to keep your vehicle in good condition,be sure to maintain your vehicle properly.

6-2

Using the Maintenance ScheduleWe at General Motors want to help you keep yourvehicle in good working condition. But we do not knowexactly how you will drive it. You may drive veryshort distances only a few times a week. Or you maydrive long distances all the time in very hot, dustyweather. You may use your vehicle in making deliveries.Or you may drive it to work, to do errands, or in manyother ways.

Because of all the different ways people use theirvehicles, maintenance needs vary. You may need morefrequent checks and replacements. So please readthe following and note how you drive. If you have anyquestions on how to keep your vehicle in good condition,see your GM Goodwrench® dealer.

This schedule is for vehicles that:

• carry passengers and cargo within recommendedlimits. You will find these limits on the tire andloading information label. See Loading Your Vehicleon page 4-31.

• are driven on reasonable road surfaces within legaldriving limits.

• use the recommended fuel. See Gasoline Octaneon page 5-5.

The services in Scheduled Maintenance on page 6-4should be performed when indicated. See AdditionalRequired Services on page 6-6 and MaintenanceFootnotes on page 6-7 for further information.

{CAUTION:

Performing maintenance work on a vehicle canbe dangerous. In trying to do some jobs, youcan be seriously injured. Do your ownmaintenance work only if you have therequired know-how and the proper tools andequipment for the job. If you have any doubt,see your GM Goodwrench ® dealer to have aqualified technician do the work.

Some maintenance services can be complex.So, unless you are technically qualified and havethe necessary equipment, you should have yourGM Goodwrench® dealer do these jobs.

When you go to your GM Goodwrench® dealer for yourservice needs, you will know that GM-trained andsupported service technicians will perform the workusing genuine GM parts.

6-3

If you want to purchase service information, see ServicePublications Ordering Information on page 7-17.Owner Checks and Services on page 6-8 tells you whatshould be checked, when to check it, and what you caneasily do to help keep your vehicle in good condition.The proper replacement parts, fluids, and lubricants touse are listed in Recommended Fluids and Lubricantson page 6-12 and Normal Maintenance ReplacementParts on page 6-14. When your vehicle is serviced,make sure these are used. All parts should be replacedand all necessary repairs done before you or anyoneelse drives the vehicle. We recommend the use ofgenuine GM parts.

Scheduled MaintenanceWhen the CHANGE OIL SOON message in theDriver Information Center (DIC) comes on, it meansthat service is required for your vehicle. See DICWarnings and Messages on page 3-40. Have yourvehicle serviced as soon as possible within the next600 miles (1 000 km). It is possible that, if you aredriving under the best conditions, the engine oil lifesystem may not indicate that vehicle service isnecessary for over a year. However, your engine oiland filter must be changed at least once a yearand at this time the system must be reset. YourGM Goodwrench® dealer has GM-trained servicetechnicians who will perform this work using genuineGM parts and reset the system.

If the engine oil life system is ever reset accidentally,you must service your vehicle within 3,000 miles(5 000 km) since your last service. Remember toreset the oil life system whenever the oil is changed.See Engine Oil Life System on page 5-20 for informationon the Engine Oil Life System and resetting the system.

When the CHANGE OIL SOON message appears,certain services, checks, and inspections are required.Required services are described in the followingfor “Maintenance I” and “Maintenance II.” Generally, it isrecommended that your first service be Maintenance I,your second service be Maintenance II, and thatyou alternate Maintenance I and Maintenance IIthereafter. However, in some cases, Maintenance IImay be required more often.

Maintenance I — Use Maintenance I if the CHANGEOIL SOON message comes on within 10 months sincethe vehicle was purchased or Maintenance II wasperformed.

Maintenance II — Use Maintenance II if the previousservice performed was Maintenance I. Always useMaintenance II whenever the CHANGE OIL SOONmessage comes on 10 months or more since the lastservice or if the message has not come on at all forone year.

6-4

Scheduled MaintenanceService Maintenance I Maintenance II

Change engine oil and filter. See Engine Oil on page 5-15. Reset oil lifesystem. See Engine Oil Life System on page 5-20. An Emission ControlService.

• •

Visually check for any leaks or damage. See footnote (j). • •Inspect engine air cleaner filter. If necessary, replace filter. See Engine AirCleaner/Filter on page 5-21. See footnote (k). •

Rotate tires and check inflation pressures and wear. See Tire Inspection andRotation on page 5-63 and “Tire Wear Inspection” in At Least Once a Month onpage 6-9.

• •

Inspect brake system. See footnote (a). • •Check engine coolant and windshield washer fluid levels. If you have the2.0L L4 supercharged engine, check intercooler fluid level. Add fluid as needed. • •

Perform any needed additional services. See “Additional Required Services” inthis section. • •

Inspect suspension and steering components. See footnote (b). •Inspect engine cooling system. See footnote (c). •Inspect wiper blades. See footnote (d). •Inspect restraint system components. See footnote (e). •Lubricate body components. See footnote (f). •Replace passenger compartment air filter. See footnote (l). •Inspect throttle system. See footnote (g). •

6-5

Additional Required ServicesThe following services should be performed at the first maintenance service (I or II) after the indicated miles (kilometers)shown for each item.

Additional Required Services

Service and Miles (Kilometers) 25,000(41 500)

50,000(83 000)

75,000(125 000)

100,000(166 000)

125,000(207 500)

150,000(240 000)

Inspect fuel system for damage or leaks. • • • • • •Inspect exhaust system for loose ordamaged components. • • • • • •

Replace engine air cleaner filter. SeeEngine Air Cleaner/Filter on page 5-21. • • •

Change automatic transaxle fluid andfilter (severe service only).See footnote (h).

• • •

Replace spark plugs. An EmissionControl Service. •

Engine cooling system service (or everyfive years, whichever occurs first).An Emission Control Service.See footnote (i).

•

Inspect engine accessory drive belt.An Emission Control Service.See footnote (m).

•

6-6

Maintenance Footnotes(a) Visually inspect brake lines and hoses for properhook-up, binding, leaks, cracks, chafing, etc. Inspectdisc brake pads for wear and rotors for surfacecondition. Inspect drum brake linings/shoes for wear orcracks. Inspect other brake parts, including drums,wheel cylinders, calipers, parking brake, etc.

(b) Visually inspect front and rear suspension andsteering system for damaged, loose, or missing parts orsigns of wear. Inspect power steering cables forproper hook-up, binding, cracks, chafing, etc.

(c) Visually inspect hoses and have them replaced ifthey are cracked, swollen, or deteriorated. Inspectall pipes, fittings and clamps; replace with genuineGM parts as needed. To help ensure proper operation,a pressure test of the cooling system and pressurecap and cleaning the outside of the radiator andair conditioning condenser is recommended at leastonce a year.

(d) Visually inspect wiper blades for wear or cracking.Replace wiper blades that appear worn or damagedor that streak or miss areas of the windshield.

(e) Make sure the safety belt reminder light and all yourbelts, buckles, latch plates, retractors, and anchoragesare working properly. Look for any other loose ordamaged safety belt system parts. If you see anythingthat might keep a safety belt system from doing itsjob, have it repaired. Have any torn or frayed safety beltsreplaced. Also look for any opened or broken airbagcoverings, and have them repaired or replaced.The airbag system does not need regular maintenance.

(f) Lubricate all key lock cylinders, door hinges andlatches, hood hinges and latches and trunk lid hingesand latches. More frequent lubrication may be requiredwhen exposed to a corrosive environment. Applyingsilicone grease on weatherstrips with a clean cloth willmake them last longer, seal better, and not stick orsqueak.

(g) Check system for interference or binding and fordamaged or missing parts. Replace parts as needed.Replace any components that have high effort orexcessive wear. Do not lubricate accelerator or cruisecontrol cables.

6-7

(h) Change automatic transaxle fluid and filter if thevehicle is mainly driven under one or more of theseconditions:

− In heavy city traffic where the outside temperatureregularly reaches 90°F (32°C) or higher.

− In hilly or mountainous terrain.− When doing frequent trailer towing.− Uses such as found in taxi, police, or delivery

service.

If you do not use your vehicle under any of theseconditions, the fluid and filter do not require changing.

(i) Drain, flush, and refill cooling system. This servicecan be complex; you should have your dealer performthis service. See Engine Coolant on page 5-23 forwhat to use. Inspect hoses. Clean radiator, condenser,pressure cap, and filler neck. Pressure test thecooling system and pressure cap.

(j) A fluid loss in any vehicle system could indicate aproblem. Have the system inspected and repaired andthe fluid level checked. Add fluid if needed.

(k) If you drive regularly under dusty conditions, inspectthe filter at each engine oil change.

(l) If you drive regularly under dusty conditions, the filtermay require replacement more often.

(m) Visually inspect belt for fraying, excessive cracks, orobvious damage. Replace belt if necessary.

Owner Checks and ServicesThese owner checks and services should be performedat the intervals specified to help ensure the safety,dependability, and emission control performance of yourvehicle. Your GM Goodwrench® dealer can assist youwith these checks and services.

Be sure any necessary repairs are completed at once.Whenever any fluids or lubricants are added to yourvehicle, make sure they are the proper ones, as shownin Recommended Fluids and Lubricants on page 6-12.

6-8

At Each Fuel FillIt is important to perform these underhood checks ateach fuel fill.

Engine Oil Level CheckCheck the engine oil level and add the proper oil ifnecessary. See Engine Oil on page 5-15 for furtherdetails.

Notice: It is important to check your oil regularlyand keep it at the proper level. Failure to keep yourengine oil at the proper level can cause damageto your engine not covered by your warranty.

Engine Coolant Level CheckCheck the engine coolant level and add DEX-COOL®

coolant mixture if necessary. See Engine Coolanton page 5-23 for further details.

Intercooler Coolant Level Check(2.0L Supercharged Engine)Check the coolant level and add DEX-COOL® coolantmixture if necessary. See Engine Coolant on page 5-23for further details.

Windshield Washer Fluid Level CheckCheck the windshield washer fluid level in thewindshield washer fluid reservoir and add the properfluid if necessary.

At Least Once a Month

Tire Inflation CheckVisually inspect your vehicle’s tires and make sure theyare inflated to the correct pressures. Do not forget tocheck the spare tire. See Tires on page 5-54 for furtherdetails. Check to make sure the spare tire is storedsecurely. See Changing a Flat Tire on page 5-71.

Tire Wear InspectionTire rotation may be required for high mileage highwaydrivers prior to the Engine Oil Life System servicenotification. Check the tires for wear and, if necessary,rotate the tires. See Tire Inspection and Rotation onpage 5-63.

6-9

At Least Once a Year

Starter Switch Check

{CAUTION:

When you are doing this inspection, thevehicle could move suddenly. If the vehiclemoves, you or others could be injured.

1. Before you start, be sure you have enough roomaround the vehicle.

2. Firmly apply both the parking brake and the regularbrake. See Parking Brake on page 2-27.Do not use the accelerator pedal, and be ready toturn off the engine immediately if it starts.

3. On automatic transaxle vehicles, try to start theengine in each gear. The vehicle should start only inPARK (P) or NEUTRAL (N). If the vehicle starts inany other position, your vehicle needs service.On manual transaxle vehicles, put the shift lever inNEUTRAL (N), push the clutch down halfway, and tryto start the engine. The vehicle should start onlywhen the clutch is pushed down all the way to thefloor. If the vehicle starts when the clutch is notpushed all the way down, your vehicle needs service.

Automatic Transaxle Shift Lock ControlSystem Check

{CAUTION:

When you are doing this inspection, the vehiclecould move suddenly. If the vehicle moves,you or others could be injured.

1. Before you start, be sure you have enough roomaround the vehicle. It should be parked on a levelsurface.

2. Firmly apply the parking brake. See Parking Brakeon page 2-27.Be ready to apply the regular brake immediately ifthe vehicle begins to move.

3. With the engine off, turn the ignition to RUN, but donot start the engine. Without applying the regularbrake, try to move the shift lever out of PARK (P)with normal effort. If the shift lever moves outof PARK (P), your vehicle needs service.

6-10

Ignition Transaxle Lock CheckWhile parked, and with the parking brake set, try to turnthe ignition to LOCK in each shift lever position.

• With an automatic transaxle, the ignition should turnto LOCK only when the shift lever is in PARK (P).The key should come out only in LOCK.

• With a manual transaxle, the key should come outonly in LOCK.

Turn the steering wheel to the left and to the right. Itshould only lock when turned to the right.

Parking Brake and Automatic TransaxlePark (P) Mechanism Check

{CAUTION:

When you are doing this check, your vehiclecould begin to move. You or others could beinjured and property could be damaged. Makesure there is room in front of your vehicle incase it begins to roll. Be ready to apply theregular brake at once should the vehicle beginto move.

Park on a fairly steep hill, with the vehicle facingdownhill. Keeping your foot on the regular brake, set theparking brake.

• To check the parking brake’s holding ability: Withthe engine running and transaxle in NEUTRAL (N),slowly remove foot pressure from the regular brakepedal. Do this until the vehicle is held by theparking brake only.

• To check the PARK (P) mechanism’s holding ability:With the engine running, shift to PARK (P). Thenrelease the parking brake followed by the regularbrake.

Underbody Flushing ServiceAt least every spring, use plain water to flush anycorrosive materials from the underbody. Take care toclean thoroughly any areas where mud and other debriscan collect.

6-11

Recommended Fluids andLubricantsFluids and lubricants identified below by name, partnumber, or specification may be obtained from yourdealer.

Usage Fluid/Lubricant

Engine Oil(2.2L and 2.4L

L4 engines)

Engine oil which meetsGM Standard GM6094M anddisplays the American PetroleumInstitute (API) Certified for GasolineEngines starburst symbol.GM Goodwrench® oil meets allthe requirements for your vehicle.To determine the proper viscosity foryour vehicle’s engine, see EngineOil on page 5-15.


Engine Oil(2.0L L4

Superchargedengine)

The engine requires aspecial engine oil meetingGM Standard GM4718M. Oilsmeeting this standard may beidentified with the AmericanPetroleum Institute (API) Certifiedfor Gasoline Engines starburstsymbol. However, not all syntheticAPI oils with the starburst symbolwill meet this GM standard. Youshould look for and use only an oilthat meets GM Standard GM4718M.GM Goodwrench® oil meets all therequirements for your vehicle. Forthe proper viscosity, see Engine Oilon page 5-15.

Engine CoolingSystem

50/50 mixture of clean, drinkablewater and use only DEX-COOL®

Coolant. See Engine Coolant onpage 5-23.

IntercoolerSystem(2.0L L4

Superchargedengine)

50/50 mixture of clean, drinkablewater and use only DEX-COOL®

Coolant.

6-12

Usage Fluid/LubricantHydraulic Brake

SystemDelco® Supreme 11 Brake Fluid orequivalent DOT-3 brake fluid.

HydraulicClutch System

Delco® Supreme 11 Brake Fluid orequivalent DOT-3 brake fluid.

WindshieldWasher Optikleen® Washer Solvent.

Parking BrakeCable Guides

Chassis Lubricant(GM Part No. 12377985,in Canada 88901242) or lubricantmeeting requirements of NLGI #2,Category LB or GC-LB.

ManualTransaxle

(2.2L and 2.4LL4 engines)

DEXRON®-III AutomaticTransmission Fluid. Look for“Approved for the H-Specification”on the label.

ManualTransaxle(2.0L L4

Superchargedengine)

Manual Transmission Fluid(Part No. 21018899).

AutomaticTransaxle

DEXRON®-VI AutomaticTransmission Fluid.

Key LockCylinders

Multi-Purpose Lubricant, Superlube(GM Part No. U.S. 12346241,in Canada 10953474).


ManualTransaxle Shift

Linkage

Chassis Lubricant(GM Part No. U.S. 12377985,in Canada 88901242) or lubricantmeeting requirements of NLGI #2,Category LB or GC-LB.

Clutch LinkagePivot Points Engine Oil.

ChassisLubrication

Chassis Lubricant(GM Part No. U.S. 12377985,in Canada 88901242) or lubricantmeeting requirements of NLGI #2,Category LB or GC-LB.

Hood LatchAssembly,Secondary

Latch, Pivots,Spring Anchor,

andRelease Pawl

Lubriplate Lubricant Aerosol(GM Part No. U.S. 12346293,in Canada 992723) or lubricantmeeting requirements of NLGI #2,Category LB or GC-LB.

Hood and DoorHinges

Multi-Purpose Lubricant, Superlube(GM Part No. U.S. 12346241,in Canada 10953474).

WeatherstripConditioning

Dielectric Silicone Grease(GM Part No. U.S. 12345579,in Canada 992887).

6-13

Normal Maintenance Replacement PartsReplacement parts identified below by name, part number, or specification can be obtained from your GM dealer.

Normal Maintenance Replacement Parts

Part GM Part Number ACDelco ® PartNumber

Engine Air Cleaner/Filter

2.2L L4 and 2.4L L4 Engine 21999324 A2956C

2.0L L4 Engine Supercharged 15239447 —

Engine Oil Filter 12579143 PF456G

Spark Plugs

2.2L L4 and 2.4L L4 Engine 12599232 41-981

2.0L L4 Engine Supercharged 12787099 PFR6T-10G

Passenger Compartment Air Filter 52493319 CF125

Windshield Wiper Blade (Hook Type)

Driver’s Side — 22 inches (56 cm) 15243233 —

Passenger’s Side — 17 inches (43 cm) 15243232 —

6-14

Maintenance RecordAfter the scheduled services are performed, record the date, odometer reading, who performed the service, and thetype of services performed in the boxes provided. See Maintenance Requirements on page 6-2. Any additionalinformation from Owner Checks and Services on page 6-8 can be added on the following record pages. You shouldretain all maintenance receipts.

Maintenance Record

Date OdometerReading Serviced By Maintenance I or

Maintenance II Services Performed

6-15

Maintenance Record (cont’d)



6-16




6-17




6-18

Customer Assistance and Information ...............7-2Customer Satisfaction Procedure ......................7-2Online Owner Center ......................................7-4Customer Assistance for Text

Telephone (TTY) Users ................................7-4Customer Assistance Offices ............................7-5GM Mobility Reimbursement Program ................7-6Roadside Assistance Program ..........................7-7Courtesy Transportation ...................................7-8Vehicle Data Collection and Event Data

Recorders ................................................7-11Collision Damage Repair ................................7-12

Reporting Safety Defects ................................7-16Reporting Safety Defects to the United States

Government ..............................................7-16Reporting Safety Defects to the Canadian

Government ..............................................7-16Reporting Safety Defects to

General Motors .........................................7-16Service Publications Ordering Information .........7-17

Section 7 Customer Assistance and Information

7-1

Customer Assistance andInformation

Customer Satisfaction ProcedureYour satisfaction and goodwill are important to yourdealer and to Chevrolet. Normally, any concerns withthe sales transaction or the operation of your vehiclewill be resolved by your dealer’s sales or servicedepartments. Sometimes, however, despite the bestintentions of all concerned, misunderstandings canoccur. If your concern has not been resolved to yoursatisfaction, the following steps should be taken:

STEP ONE: Discuss your concern with a memberof dealership management. Normally, concerns canbe quickly resolved at that level. If the matter hasalready been reviewed with the sales, service or partsmanager, contact the owner of the dealership orthe general manager.

STEP TWO: If after contacting a member of dealershipmanagement, it appears your concern cannot beresolved by the dealership without further help, contactthe Chevrolet Customer Assistance Center by calling1-800-222-1020. In Canada, contact GM of CanadaCustomer Communication Centre by calling1-800-263-3777 (English) or 1-800-263-7854 (French).

We encourage you to call the toll-free number inorder to give your inquiry prompt attention. Please havethe following information available to give the CustomerAssistance Representative:

• Vehicle Identification Number (VIN). This isavailable from the vehicle registration or title,or the plate at the top left of the instrument paneland visible through the windshield.

• Dealership name and location.

• Vehicle delivery date and presentmileage (kilometers).

When contacting Chevrolet, please remember that yourconcern will likely be resolved at a dealer’s facility.That is why we suggest you follow Step One first if youhave a concern.

7-2

STEP THREE: Both General Motors and your dealerare committed to making sure you are completelysatisfied with your new vehicle. However, if you continueto remain unsatisfied after following the procedureoutlined in Steps One and Two, you should file with theBBB Auto Line Program to enforce any additionalrights you may have. Canadian owners refer to yourWarranty and Owner Assistance Information booklet forinformation on the Canadian Motor Vehicle ArbitrationPlan (CAMVAP).

The BBB Auto Line Program is an out of court programadministered by the Council of Better Business Bureausto settle automotive disputes regarding vehicle repairsor the interpretation of the New Vehicle LimitedWarranty. Although you may be required to resort tothis informal dispute resolution program prior to filing acourt action, use of the program is free of charge andyour case will generally be heard within 40 days. If youdo not agree with the decision given in your case, youmay reject it and proceed with any other venue for reliefavailable to you.

You may contact the BBB Auto Line Program using thetoll-free telephone number or write them at thefollowing address:

BBB Auto Line ProgramCouncil of Better Business Bureaus, Inc.4200 Wilson BoulevardSuite 800Arlington, VA 22203-1838

Telephone: 1-800-955-5100

This program is available in all 50 states and the Districtof Columbia. Eligibility is limited by vehicle age, mileage,and other factors. General Motors reserves the right tochange eligibility limitations and/or discontinue itsparticipation in this program.

7-3

Online Owner CenterThe Owner Center is a resource for your GM ownershipneeds. Specific vehicle information can be found inone place.

The Online Owner Center allows you to:

• Get e-mail service reminders.

• Access information about your specific vehicle,including tips and videos and an electronicversion of this owner’s manual (United States only).

• Keep track of your vehicle’s service history andmaintenance schedule.

• Find GM dealers for service nationwide.

• Receive special promotions and privileges onlyavailable to members (United States only).

Refer to the web for updated information.

To register your vehicle, visit www.MyGMLink.com(United States) or My GM Canada withinwww.gmcanada.com (Canada).

Customer Assistance for TextTelephone (TTY) UsersTo assist customers who are deaf, hard of hearing, orspeech-impaired and who use Text Telephones (TTYs),Chevrolet has TTY equipment available at its CustomerAssistance Center. Any TTY user can communicate withChevrolet by dialing: 1-800-833-CHEV (2438).(TTY users in Canada can dial 1-800-263-3830.)

7-4

Customer Assistance OfficesChevrolet encourages customers to call the toll-freenumber for assistance. However, if a customerwishes to write or e-mail Chevrolet, refer to theaddresses below.

United States — Customer AssistanceChevrolet Motor DivisionChevrolet Customer Assistance CenterP.O. Box 33170Detroit, MI 48232-5170

www.Chevrolet.com1-800-222-10201-800-833-2438 (For Text Telephone devices (TTYs))Roadside Assistance: 1-800-CHEV-USA (243-8872)Fax Number: 313-381-0022

From Puerto Rico:1-800-496-9992 (English)1-800-496-9993 (Spanish)Fax Number: 313-381-0022

From U.S. Virgin Islands:1-800-496-9994Fax Number: 313-381-0022

Canada — Customer AssistanceGeneral Motors of Canada LimitedCustomer Communication Centre, 163-0051908 Colonel Sam DriveOshawa, Ontario L1H 8P7

1-800-263-3777 (English)1-800-263-7854 (French)1-800-263-3830 (For Text Telephone devices (TTYs))Roadside Assistance: 1-800-268-6800

Overseas — Customer AssistancePlease contact the local General Motors Business Unit.

7-5

Mexico, Central America andCaribbean Islands/Countries(Except Puerto Rico and U.S. VirginIslands) — Customer Assistance

General Motors de Mexico, S. de R.L. de C.V.Customer Assistance CenterPaseo de la Reforma # 2740Col. Lomas de BezaresC.P. 11910, Mexico, D.F.01-800-508-0000Long Distance: 011-52-53 29 0 800

GM Mobility ReimbursementProgram

This program, available to qualified applicants, canreimburse you up to $1,000 of the cost of eligibleaftermarket adaptive equipment required for your vehicle,such as hand controls or a wheelchair/scooter lift.

The offer is available for a very limited period of timefrom the date of vehicle purchase/lease. For moredetails, or to determine your vehicle’s eligibility, visitgmmobility.com or call the GM Mobility AssistanceCenter at 1-800-323-9935. Text telephone (TTY) users,call 1-800-833-9935.

GM of Canada also has a Mobility Program. Call1-800-GM-DRIVE (463-7483) for details. TTY users call1-800-263-3830.

7-6

Roadside Assistance ProgramAs the owner of a new Chevrolet vehicle, you areautomatically enrolled in the Chevrolet RoadsideAssistance program. This value-added service isintended to provide you with peace of mind as youdrive in the city or travel the open road. Call Chevrolet’sRoadside Assistance at 1-800-CHEV-USA,(1-800-243-8872) 24 hours a day, 365 days a year tospeak with a Chevrolet Roadside Assistancerepresentative.

We will provide the following services during theBumper-to-Bumper warranty period, at no expenseto you:

• Fuel Delivery: Delivery of enough fuel($5 maximum) for the customer to get to thenearest service station.

• Lock-out Service (identification required):Replacement keys or locksmith service will becovered at no charge if you are unable to gain entryinto your vehicle. Delivery of the replacement keywill be covered within 10 miles (16 km).

• Emergency Tow: Tow to the nearest dealershipfor warranty service or in the event of avehicle-disabling accident. Assistance providedwhen the vehicle is mired in sand, mud, or snow.

• Flat Tire Change: Installation of a spare tire will becovered at no charge. The customer is responsiblefor the repair or replacement of the tire if notcovered by a warrantable failure.

• Jump Start: No-start occurrences which require abattery jump start will be covered at no charge.

• Dealer Locator Service

In many instances, mechanical failures are coveredunder Chevrolet’s Bumper-to-Bumper warranty.However, when other services are utilized, our RoadsideAssistance Representatives will explain any paymentobligations you might incur.

7-7

For prompt and efficient assistance when calling, pleaseprovide the following to the Roadside AssistanceRepresentative:

• Your name, home address, and hometelephone number.

• Telephone number of your location.

• Location of the vehicle.

• Model, year, color, and license plate number.

• Mileage, Vehicle Identification Number (VIN),and delivery date of the vehicle.

• Description of the problem.

While we hope you never have the occasion to use ourservice, it is added security while traveling for you andyour family. Remember, we are only a phone call away.Chevrolet Roadside Assistance: 1-800-CHEV-USA(1-800-243-8872), text telephone (TTY) users, call1-888-889-2438.

Chevrolet reserves the right to limit services orreimbursement to an owner or driver when,in Chevrolet’s judgement, the claims becomeexcessive in frequency or type of occurrence.

Roadside Assistance is not part of or included in thecoverage provided by the New Vehicle Limited Warranty.Chevrolet reserves the right to make any changes ordiscontinue the Roadside Assistance program atany time without notification.

Canadian Roadside AssistanceVehicles purchased in Canada have an extensiveroadside assistance program accessible from anywherein Canada or the United States. Please refer to theWarranty and Owner Assistance Information book.

Courtesy TransportationTo enhance your ownership experience, we andour participating dealers are proud to offer CourtesyTransportation, a customer support program fornew vehicles.

The Courtesy Transportation program is offered tocustomers in conjunction with the Bumper-to-Bumpercoverage provided by the New Vehicle Limited Warranty.Several transportation options are available whenwarranty repairs are required. This will reduce yourinconvenience during warranty repairs.

7-8

Scheduling Service AppointmentsWhen your vehicle requires warranty service, you shouldcontact your dealer and request an appointment. Byscheduling a service appointment and advising yourservice consultant of your transportation needs,your dealer can help minimize your inconvenience.

If your vehicle cannot be scheduled into the servicedepartment immediately, keep driving it until it can bescheduled for service, unless, of course, the problem issafety-related. If it is, please call your dealership, letthem know this, and ask for instructions.

If the dealer requests that you simply drop the vehicleoff for service, you are urged to do so as early in thework day as possible to allow for the same day repair.

Transportation OptionsWarranty service can generally be completed while youwait. However, if you are unable to wait, GM helps tominimize your inconvenience by providing severaltransportation options. Depending on the circumstances,your dealer can offer you one of the following:

Shuttle ServiceParticipating dealers can provide you with shuttleservice to get you to your destination with minimalinterruption of your daily schedule. This includesone-way or round trip shuttle service to a destinationup to 10 miles (16 km) from the dealership.

Public Transportation or FuelReimbursementIf your vehicle requires overnight warranty repairs,reimbursement of public transportation expensesmay be available, for up to a maximum of five days.In addition, should you arrange transportation througha friend or relative, reimbursement for reasonablefuel expenses may be available, up to a five-daymaximum. Claim amounts should reflect actual costsand be supported by original receipts.

7-9

Courtesy Rental VehicleYour dealer may arrange to provide you with a courtesyrental vehicle or reimburse you for a rental vehicle thatyou obtain if your vehicle is kept for a warranty repair.Reimbursement will be limited to a maximum amountper day and must be supported by receipts. Thisrequires that you sign and complete a rental agreementand meet state, local and rental vehicle providerrequirements. Requirements vary and may includeminimum age requirements, insurance coverage, creditcard, etc. You are responsible for fuel usage chargesand may also be responsible for taxes, levies, usagefees, excessive mileage or rental usage beyond thecompletion of the repair.

Generally it is not possible to provide a like-vehicle as acourtesy rental.

Additional Program InformationCourtesy Transportation is available during theBumper-to-Bumper warranty coverage period, but itis not part of the New Vehicle Limited Warranty.A separate booklet entitled Warranty and OwnerAssistance Information furnished with each new vehicleprovides detailed warranty coverage information.

Courtesy Transportation is available only at participatingdealers and all program options, such as shuttleservice, may not be available at every dealer. Pleasecontact your dealer for specific information aboutavailability. All Courtesy Transportation arrangementswill be administered by appropriate dealer personnel.

Canadian Vehicles: For warranty repairs duringthe Complete Vehicle Coverage period of theGeneral Motors of Canada New Vehicle LimitedWarranty, alternative transportation may be availableunder the Courtesy Transportation Program. Pleaseconsult your dealer for details.

General Motors reserves the right to unilaterally modify,change or discontinue Courtesy Transportation at anytime and to resolve all questions of claim eligibilitypursuant to the terms and conditions described hereinat its sole discretion.

7-10

Vehicle Data Collection and EventData RecordersYour vehicle, like other modern motor vehicles,has a number of sophisticated computer systems thatmonitor and control several aspects of the vehicle’sperformance. Your vehicle uses on-board vehiclecomputers to monitor emission control componentsto optimize fuel economy, to monitor conditions forairbag deployment and, if so equipped, to provideanti-lock braking and to help the driver control thevehicle in difficult driving situations. Some informationmay be stored during regular operations to facilitaterepair of detected malfunctions; other information isstored only in a crash event by computer systems,such as those commonly called event datarecorders (EDR).

In a crash event, computer systems, such as the AirbagSensing and Diagnostic Module (SDM) in your vehiclemay record information about the condition of the vehicleand how it was operated, such as data related toengine speed, brake application, throttle position, vehiclespeed, safety belt usage, airbag readiness, airbagperformance, and the severity of a collision. Thisinformation has been used to improve vehicle crashperformance and may be used to improve crashperformance of future vehicles and driving safety. Unlikethe data recorders on many airplanes, these on-boardsystems do not record sounds, such as conversation ofvehicle occupants.

To read this information, special equipment is neededand access to the vehicle or the device that storesthe data is required. GM will not access informationabout a crash event or share it with others other than:

• with the consent of the vehicle owner or, if thevehicle is leased, with the consent of the lessee,

• in response to an official request of police or similargovernment office,

• as part of GM’s defense of litigation through thediscovery process, or

• as required by law.

7-11

In addition, once GM collects or receives data, GM may:

• use the data for GM research needs,

• make it available for research where appropriateconfidentiality is to be maintained and need isshown, or

• share summary data which is not tied to a specificvehicle with non-GM organizations for researchpurposes.

Others, such as law enforcement, may have accessto the special equipment that can read the informationif they have access to the vehicle or the device thatstores the data.

If your vehicle is equipped with OnStar®, please checkthe OnStar® subscription service agreement ormanual for information on its operations and datacollection.

Collision Damage RepairIf your vehicle is involved in a collision and it isdamaged, have the damage repaired by a qualifiedtechnician using the proper equipment and qualityreplacement parts. Poorly performed collision repairswill diminish your vehicle’s resale value, and safetyperformance can be compromised in subsequentcollisions.

Collision PartsGenuine GM Collision parts are new parts made with thesame materials and construction methods as the partswith which your vehicle was originally built. Genuine GMCollision parts are your best choice to assure that yourvehicle’s designed appearance, durability and safety arepreserved. The use of Genuine GM parts can helpmaintain your GM New Vehicle Warranty.

Recycled original equipment parts may also be used forrepair. These parts are typically removed from vehiclesthat were total losses in prior accidents. In mostcases, the parts being recycled are from undamagedsections of the vehicle. A recycled original equipmentGM part, may be an acceptable choice to maintain yourvehicle’s originally designed appearance and safetyperformance, however, the history of these parts is notknown. Such parts are not covered by your GM NewVehicle Limited Warranty, and any related failuresare not covered by that warranty.

7-12

Aftermarket collision parts are also available. These aremade by companies other than GM and may not havebeen tested for your vehicle. As a result, these partsmay fit poorly, exhibit premature durability/corrosionproblems, and may not perform properly in subsequentcollisions. Aftermarket parts are not covered by yourGM New Vehicle Limited Warranty, and any vehiclefailure related to such parts are not covered bythat warranty.

Repair FacilityGM also recommends that you choose a collision repairfacility that meets your needs before you ever needcollision repairs. Your GM dealer may have a collisionrepair center with GM-trained technicians and stateof the art equipment, or be able to recommend acollision repair center that has GM-trained techniciansand comparable equipment.

Insuring Your VehicleProtect your investment in your GM vehicle withcomprehensive and collision insurance coverage. Thereare significant differences in the quality of coverageafforded by various insurance policy terms. Manyinsurance policies provide reduced protection to yourGM vehicle by limiting compensation for damage repairsby using aftermarket collision parts. Some insurancecompanies will not specify aftermarket collision parts.When purchasing insurance, we recommend that youassure your vehicle will be repaired with GM originalequipment collision parts. If such insurance coverage isnot available from your current insurance carrier,consider switching to another insurance carrier.

If your vehicle is leased, the leasing company mayrequire you to have insurance that assures repairs withGenuine GM Original Equipment Manufacturer (OEM)parts or Genuine Manufacturer replacement parts. Readyour lease carefully, as you may be charged at theend of your lease for poor quality repairs.

7-13

If an Accident OccursHere is what to do if you are involved in an accident.

• Try to relax and then check to make sure you areall right. If you are uninjured, make sure that noone else in your vehicle, or the other vehicle,is injured.

• If there has been an injury, call 911 for help. Do notleave the scene of an accident until all matters havebeen taken care of. Move your vehicle only if itsposition puts you in danger or you are instructed tomove it by a police officer.

• Give only the necessary and requested informationto police and other parties involved in the accident.Do not discuss your personal condition, mentalframe of mind, or anything unrelated to theaccident. This will help guard against post-accidentlegal action.

• If you need roadside assistance, call GM RoadsideAssistance. See Roadside Assistance Program onpage 7-7 for more information.

• If your vehicle cannot be driven, know where thetowing service will be taking it. Get a card fromthe tow truck operator or write down the driver’sname, the service’s name, and the phone number.

• Remove any valuables from your vehicle before it istowed away. Make sure this includes your insuranceinformation and registration if you keep these itemsin your vehicle.

• Gather the important information you will need fromthe other driver. Things like name, address, phonenumber, driver’s license number, vehicle licenseplate, vehicle make, model and model year, VehicleIdentification Number (VIN), insurance companyand policy number, and a general description of thedamage to the other vehicle.

• If possible, call your insurance company from thescene of the accident. They will walk you throughthe information they will need. If they ask for apolice report, phone or go to the police departmentheadquarters the next day and you can get acopy of the report for a nominal fee. In some stateswith “no fault” insurance laws, a report may notbe necessary. This is especially true if there are noinjuries and both vehicles are driveable.

7-14

• Choose a reputable collision repair facility for yourvehicle. Whether you select a GM dealer or aprivate collision repair facility to fix the damage,make sure you are comfortable with them.Remember, you will have to feel comfortable withtheir work for a long time.

• Once you have an estimate, read it carefully andmake sure you understand what work will beperformed on your vehicle. If you have a question,ask for an explanation. Reputable shops welcomethis opportunity.

Managing the Vehicle Damage RepairProcessIn the event that your vehicle requires damage repairs,GM recommends that you take an active role in itsrepair. If you have a pre-determined repair facility ofchoice, take your vehicle there, or have it towed there.Specify to the facility that any required replacementcollision parts be original equipment parts, either newGenuine GM parts or recycled original GM parts.Remember, recycled parts will not be covered by yourGM vehicle warranty.

Insurance pays the bill for the repair, but you mustlive with the repair. Depending on your policy limits,your insurance company may initially value the repairusing aftermarket parts. Discuss this with your repairprofessional, and insist on Genuine GM parts.Remember if your vehicle is leased you may beobligated to have the vehicle repaired with Genuine GMparts, even if your insurance coverage does not paythe full cost.

If another party’s insurance company is paying for therepairs, you are not obligated to accept a repairvaluation based on that insurance company’s collisionpolicy repair limits, as you have no contractual limits withthat company. In such cases, you can have control ofthe repair and parts choices as long as cost stays withinreasonable limits.

7-15

Reporting Safety Defects

Reporting Safety Defects to theUnited States GovernmentIf you believe that your vehicle has a defect which couldcause a crash or could cause injury or death, youshould immediately inform the National Highway TrafficSafety Administration (NHTSA), in addition to notifyingGeneral Motors.

If NHTSA receives similar complaints, it may open aninvestigation, and if it finds that a safety defect existsin a group of vehicles, it may order a recall and remedycampaign. However, NHTSA cannot become involvedin individual problems between you, your dealer,or General Motors.

To contact NHTSA, you may either call the Auto SafetyHotline toll-free at 1-800-424-9393 (or 366-0123 inthe Washington, D.C. area) or write to:

NHTSA, U.S. Department of TransportationWashington, D.C. 20590

You can also obtain other information about motorvehicle safety from the hotline.

Reporting Safety Defects to theCanadian GovernmentIf you live in Canada, and you believe that your vehiclehas a safety defect, you should immediately notifyTransport Canada, in addition to notifying GeneralMotors of Canada Limited. You may call them at1-800-333-0510 or write to:

Transport CanadaPlace de Ville Tower C330 Sparks StreetOttawa, Ontario K1A 0N5

Reporting Safety Defects toGeneral MotorsIn addition to notifying NHTSA (or Transport Canada) ina situation like this, we certainly hope you will notifyGeneral Motors. Please call the Chevrolet CustomerAssistance Center at 1-800-222-1020, or write:

Chevrolet Motor DivisionChevrolet Customer Assistance CenterP.O. Box 33170Detroit, MI 48232-5170

7-16

In Canada, please call us at 1-800-263-3777 (English)or 1-800-263-7854 (French). Or, write:

General Motors of Canada LimitedCustomer Communication Centre, 163-0051908 Colonel Sam DriveOshawa, Ontario L1H 8P7

Service Publications OrderingInformation

Service ManualsService Manuals have the diagnosis and repairinformation on engines, transmission, axle suspension,brakes, electrical, steering, body, etc.

Transmission, Transaxle, TransferCase Unit Repair ManualThis manual provides information on unit repairservice procedures, adjustments, and specifications forGM transmissions, transaxles, and transfer cases.

Service BulletinsService Bulletins give technical service informationneeded to knowledgeably service General Motors carsand trucks. Each bulletin contains instructions toassist in the diagnosis and service of your vehicle.

In Canada, information pertaining to ProductService Bulletins can be obtained by contacting yourGeneral Motors dealer or by calling 1-800-GM-DRIVE(1-800-463-7483).

Owner’s InformationOwner publications are written specifically for ownersand intended to provide basic operational informationabout the vehicle. The owner’s manual will includethe Maintenance Schedule for all models.

In-Portfolio: Includes a Portfolio, Owner’s Manual, andWarranty Booklet.

RETAIL SELL PRICE: $35.00

Without Portfolio: Owner’s Manual only.

RETAIL SELL PRICE: $25.00

7-17

Current and Past Model Order FormsService Publications are available for current andpast model GM vehicles. To request an order form,please specify year and model name of the vehicle.

ORDER TOLL FREE: 1-800-551-4123Monday-Friday 8:00 AM - 6:00 PMEastern TimeFor Credit Card Orders Only(VISA-MasterCard-Discover), visit Helm, Inc. on theWorld Wide Web at: www.helminc.com

Or you can write to:

Helm, IncorporatedP.O. Box 07130Detroit, MI 48207

Prices are subject to change without notice and withoutincurring obligation. Allow ample time for delivery.

Note to Canadian Customers: All listed prices arequoted in U.S. funds. Canadian residents are to makechecks payable in U.S. funds.

7-18

AAccessories and Modifications ............................ 5-3Accessory Power Outlet(s) ............................... 3-16Adding Equipment to Your Airbag-Equipped

Vehicle ....................................................... 1-65Additives, Fuel ................................................. 5-6Add-On Electrical Equipment ............................ 5-92Air Cleaner/Filter, Engine ................................. 5-21Air Conditioning .............................................. 3-17Airbag

Passenger Status Indicator ........................... 3-26Readiness Light .......................................... 3-25

Airbag Sensing and Diagnostic Module (SDM) .... 7-11Airbag System ................................................ 1-51

Adding Equipment to Your Airbag-EquippedVehicle ................................................... 1-65

How Does an Airbag Restrain? ...................... 1-58Passenger Sensing System ........................... 1-60Servicing Your Airbag-Equipped Vehicle .......... 1-64What Makes an Airbag Inflate? ...................... 1-58What Will You See After an Airbag Inflates? ........ 1-59When Should an Airbag Inflate? .................... 1-57Where Are the Airbags? ............................... 1-54

Antenna, Fixed Mast ....................................... 3-81Antenna, XM™ Satellite Radio Antenna System ..... 3-81Anti-Lock Brake System (ABS) ........................... 4-7Anti-Lock Brake, System Warning Light .............. 3-30

Appearance CareAluminum or Chrome-Plated Wheels .............. 5-88Care of Safety Belts .................................... 5-86Chemical Paint Spotting ............................... 5-90Cleaning Exterior Lamps/Lenses .................... 5-87Cleaning the Inside of Your Vehicle ................ 5-83Fabric/Carpet .............................................. 5-85Finish Care ................................................. 5-87Finish Damage ............................................ 5-89Instrument Panel, Vinyl, and Other

Plastic Surfaces ........................................ 5-86Leather ...................................................... 5-85Sheet Metal Damage ................................... 5-89Tires .......................................................... 5-89Underbody Maintenance ............................... 5-90Vehicle Care/Appearance Materials ................ 5-90Washing Your Vehicle ................................... 5-87Weatherstrips .............................................. 5-86Windshield and Wiper Blades ........................ 5-88

Ashtray(s) ...................................................... 3-17Audio System(s) ............................................. 3-48

Audio Steering Wheel Controls ...................... 3-79Care of Your CD Player ............................... 3-81Care of Your CDs ........................................ 3-81Fixed Mast Antenna ..................................... 3-81Radio with CD ............................ 3-50, 3-55, 3-64Setting the Time for Radios with

Radio Data Systems (RDS) ......................... 3-49

1

Audio System(s) (cont.)Setting the Time for Radios without

Radio Data Systems (RDS) ......................... 3-49Theft-Deterrent Feature ................................ 3-79Understanding Radio Reception ..................... 3-80XM™ Satellite Radio Antenna System ............ 3-81

Automatic Door Lock ......................................... 2-9Automatic Transaxle

Fluid .......................................................... 5-23Operation ................................................... 2-23

BBattery .......................................................... 5-39

Run-Down Protection ................................... 3-16Before Leaving on a Long Trip ......................... 4-22Boost Gage ................................................... 3-37Brake

Anti-Lock Brake System (ABS) ........................ 4-7Emergencies ................................................ 4-9Parking ...................................................... 2-27System Warning Light .................................. 3-29

Brakes .......................................................... 5-36Braking ........................................................... 4-6Braking in Emergencies ..................................... 4-9Break-In, New Vehicle ..................................... 2-17

Bulb Replacement ........................................... 5-47Back-Up Lamps ........................................... 5-52Center High-Mounted Stoplamp (CHMSL) ........ 5-49Halogen Bulbs ............................................ 5-47Headlamp Aiming ........................................ 5-44Headlamps, Front Turn Signal, Sidemarker,

and Parking Lamps ................................... 5-48Replacement Bulbs ...................................... 5-53Taillamps and Turn Signal Lamps .................. 5-50Taillamps, Turn Signal, Stoplamps and

Back-up Lamps ........................................ 5-51Buying New Tires ........................................... 5-64

CCalifornia Fuel .................................................. 5-6California Proposition 65 Warning ....................... 5-3Canadian Owners ................................................ iiCapacities and Specifications .......................... 5-102Carbon Monoxide ........... 2-10, 2-31, 4-26, 4-39, 4-46Care of

Safety Belts ................................................ 5-86Your CD Player ........................................... 3-81Your CDs ................................................... 3-81

Center Console Storage Area ........................... 2-37

2

Center High-Mounted Stoplamp (CHMSL) ........... 5-49Chains, Tire ................................................... 5-70Charging System Light .................................... 3-28Check

Engine Light ............................................... 3-32Checking Things Under the Hood ...................... 5-10Chemical Paint Spotting ................................... 5-90Child Restraints

Child Restraint Systems ............................... 1-35Infants and Young Children ........................... 1-32Lower Anchors and Tethers for Children .......... 1-41Older Children ............................................. 1-29Securing a Child Restraint in a Rear

Seat Position ........................................... 1-46Securing a Child Restraint in the Right

Front Seat Position ................................... 1-48Where to Put the Restraint ........................... 1-40

Cigarette Lighter ............................................. 3-17Cleaning

Aluminum or Chrome-Plated Wheels .............. 5-88Exterior Lamps/Lenses ................................. 5-87Fabric/Carpet .............................................. 5-85Finish Care ................................................. 5-87Inside of Your Vehicle .................................. 5-83Instrument Panel, Vinyl, and Other

Plastic Surfaces ....................................... 5-86

Cleaning (cont.)Leather ...................................................... 5-85Tires .......................................................... 5-89Underbody Maintenance ............................... 5-90Washing Your Vehicle ................................... 5-87Weatherstrips .............................................. 5-86Windshield and Wiper Blades ........................ 5-88

Climate Control System ................................... 3-17Air Filter, Passenger Compartment ................. 3-20Outlet Adjustment ........................................ 3-20

Clutch, Hydraulic ............................................. 5-23Collision Damage Repair .................................. 7-12Comfort Guides, Rear Safety Belt ..................... 1-25Compact Spare Tire ........................................ 5-83Competitive Driving, Racing or Other ................. 4-17Content Theft-Deterrent .................................... 2-14Control of a Vehicle .......................................... 4-6Convenience Net ............................................ 2-37Coolant

Engine Temperature Warning Light ................. 3-32Heater, Engine ............................................ 2-22Surge Tank Pressure Cap ............................. 5-29

Cooling System .............................................. 5-31Cruise Control ................................................ 3-10Cupholder(s) .................................................. 2-37

3

Customer Assistance InformationCourtesy Transportation .................................. 7-8Customer Assistance for Text

Telephone (TTY) Users ............................... 7-4Customer Assistance Offices ........................... 7-5Customer Satisfaction Procedure ..................... 7-2GM Mobility Reimbursement Program ............... 7-6Reporting Safety Defects to

General Motors ........................................ 7-16Reporting Safety Defects to the

Canadian Government .............................. 7-16Reporting Safety Defects to the

United States Government ......................... 7-16Roadside Assistance Program ......................... 7-7Service Publications Ordering Information ........ 7-17

DDaytime Running Lamps .................................. 3-14Defensive Driving ............................................. 4-2Delayed Locking ............................................... 2-8Differential, Limited-Slip .................................... 4-11Doing Your Own Service Work ........................... 5-4Dome Lamp ................................................... 3-15

DoorAutomatic Door Lock ..................................... 2-9Delayed Locking ........................................... 2-8Locks .......................................................... 2-7Power Door Locks ......................................... 2-8Programmable Automatic Door Unlock .............. 2-9Rear Door Security Locks ............................... 2-9

DriverPosition, Safety Belt ..................................... 1-15Seat Height Adjuster ...................................... 1-3

Driver Information Center (DIC) ......................... 3-38DIC Operation and Displays .......................... 3-38DIC Vehicle Personalization .......................... 3-42DIC Warnings and Messages ........................ 3-40

Driver’s Storage Compartment .......................... 2-37Driving

At Night ..................................................... 4-17City ........................................................... 4-20Defensive ..................................................... 4-2Drunken ....................................................... 4-3Freeway ..................................................... 4-21Hill and Mountain Roads .............................. 4-24In Rain and on Wet Roads ........................... 4-18Rocking Your Vehicle to Get it Out ................. 4-31Winter ........................................................ 4-26

4

EEasy Entry Seat ............................................... 1-7Electrical System

Add-On Equipment ...................................... 5-92Engine Compartment Fuse Block ................... 5-96Floor Console Fuse Block ............................. 5-94Fuses and Circuit Breakers ........................... 5-93Headlamp Wiring ......................................... 5-93Power Windows and Other Power Options ......... 5-93Windshield Wiper Fuses ............................... 5-93

EngineAir Cleaner/Filter ......................................... 5-21Battery ....................................................... 5-39Check and Service Engine Soon Light ............ 3-32Coolant ...................................................... 5-23Coolant Heater ............................................ 2-22Coolant Temperature Warning Light ................ 3-32Engine Compartment Overview ...................... 5-12Exhaust ..................................................... 2-31Oil ............................................................. 5-15Oil Life System ........................................... 5-20Overheating ................................................ 5-29Starting ...................................................... 2-20

Enhanced Traction System (ETS) ........................ 4-9Warning Light ............................................. 3-31

Entry/Exit Lighting ........................................... 3-16Event Data Recorders (EDR) ............................ 7-11Extender, Safety Belt ....................................... 1-28

FFilter

Engine Air Cleaner ...................................... 5-21Finish Damage ............................................... 5-89Fixed Mast Antenna ........................................ 3-81Flash-to-Pass ................................................... 3-8Flat Tire ........................................................ 5-70Flat Tire, Changing ......................................... 5-71Flat Tire, Storing ............................................. 5-80Fluid

Automatic Transaxle ..................................... 5-23Manual Transaxle ........................................ 5-23Windshield Washer ...................................... 5-35

Fog Lamp Light .............................................. 3-36Fog Lamps .................................................... 3-15Folding Rear Seat ............................................ 1-8

5

Fuel ............................................................... 5-5Additives ...................................................... 5-6California Fuel .............................................. 5-6Filling a Portable Fuel Container .................... 5-10Filling Your Tank ........................................... 5-8Fuels in Foreign Countries .............................. 5-7Gage ......................................................... 3-36Gasoline Octane ........................................... 5-5Gasoline Specifications .................................. 5-6

FusesEngine Compartment Fuse Block ................... 5-96Floor Console Fuse Block ............................. 5-94Fuses and Circuit Breakers ........................... 5-93Windshield Wiper ......................................... 5-93

GGage

Boost ......................................................... 3-37Fuel .......................................................... 3-36Speedometer .............................................. 3-24Tachometer ................................................. 3-24

GasolineOctane ........................................................ 5-5Specifications ............................................... 5-6

Glove Box ..................................................... 2-37GM Mobility Reimbursement Program .................. 7-6

HHazard Warning Flashers ................................... 3-6Head Restraints ............................................... 1-6Headlamp

Aiming ....................................................... 5-44Headlamp Wiring ............................................ 5-93Headlamps .................................................... 3-13

Bulb Replacement ....................................... 5-47Daytime Running Lamps ............................... 3-14Flash-to-Pass ............................................... 3-8Halogen Bulbs ............................................ 5-47Headlamps, Front Turn Signal, Sidemarker,

and Parking Lamps .................................. 5-48High/Low Beam Changer ................................ 3-8On Reminder .............................................. 3-14Wiper Activated ........................................... 3-14

Heated Seats ................................................... 1-4Heater ........................................................... 3-17Height Adjuster, Driver Seat ............................... 1-3Highbeam On Light ......................................... 3-36Highway Hypnosis ........................................... 4-23Hill and Mountain Roads .................................. 4-24Hood

Checking Things Under ................................ 5-10Release ..................................................... 5-11

6

Horn ............................................................... 3-6How to Use This Manual ...................................... iiHow to Wear Safety Belts Properly ................... 1-15Hydraulic Clutch ............................................. 5-23

IIgnition Positions ............................................. 2-18Infants and Young Children, Restraints ............... 1-32Inflation -- Tire Pressure .................................. 5-61Instrument Panel

Overview ..................................................... 3-4Instrument Panel (I/P)

Brightness .................................................. 3-15Cluster ....................................................... 3-23

JJump Starting ................................................. 5-40

KKeyless Entry System ....................................... 2-3Keys ............................................................... 2-2

LLabeling, Tire Sidewall ..................................... 5-56Lamps

Battery Run-Down Protection ......................... 3-16Dome ........................................................ 3-15Fog ........................................................... 3-15Mirror Reading ............................................ 3-16

LATCH SystemChild Restraints ........................................... 1-41

LightAirbag Readiness ........................................ 3-25Anti-Lock Brake System Warning ................... 3-30Brake System Warning ................................. 3-29Charging System ......................................... 3-28Engine Coolant Temperature Warning ............. 3-32Enhanced Traction System (ETS) Warning

Light ...................................................... 3-31Fog Lamp .................................................. 3-36Highbeam On ............................................. 3-36Malfunction Indicator .................................... 3-32Oil Pressure ............................................... 3-35Passenger Airbag Status Indicator .................. 3-26Passenger Safety Belt Reminder .................... 3-25Safety Belt Reminder ................................... 3-24Security ..................................................... 3-36Up-Shift ..................................................... 3-29

7

LightingEntry/Exit ................................................... 3-16

Limited-Slip Differential .................................... 4-11Loading Your Vehicle ....................................... 4-31Lockout Protection .......................................... 2-10Locks

Automatic Door Lock ..................................... 2-9Delayed Locking ........................................... 2-8Door ........................................................... 2-7Lockout Protection ....................................... 2-10Power Door .................................................. 2-8Programmable Automatic Door Unlock .............. 2-9Rear Door Security Locks ............................... 2-9

Loss of Control ............................................... 4-15Lumbar

Manual Controls ............................................ 1-3

MMaintenance Schedule

Additional Required Services ........................... 6-6At Each Fuel Fill ........................................... 6-9At Least Once a Month .................................. 6-9At Least Once a Year .................................. 6-10Introduction .................................................. 6-2Maintenance Footnotes .................................. 6-7

Maintenance Schedule (cont.)Maintenance Record .................................... 6-15Maintenance Requirements ............................. 6-2Normal Maintenance Replacement Parts ......... 6-14Owner Checks and Services ........................... 6-8Recommended Fluids and Lubricants ............. 6-12Scheduled Maintenance ................................. 6-4Using .......................................................... 6-3Your Vehicle and the Environment ................... 6-2

Malfunction Indicator Light ................................ 3-32Manual Lumbar Controls .................................... 1-3Manual Seats ................................................... 1-2Manual Transaxle

Fluid .......................................................... 5-23Operation ................................................... 2-25

Manual Windows ............................................ 2-13Message

DIC Warnings and Messages ........................ 3-40Mirror Reading Lamps ..................................... 3-16Mirrors

Automatic Dimming Rearview with OnStar® ....... 2-33Manual Rearview Mirror ................................ 2-33Outside Convex Mirror ................................. 2-34Outside Manual Mirror .................................. 2-33Outside Power Mirrors .................................. 2-34Outside Remote Control Mirror ...................... 2-33

MyGMLink.com ................................................ 7-4

8

NNew Vehicle Break-In ...................................... 2-17Normal Maintenance Replacement Parts ............ 6-14

OOdometer ...................................................... 3-24Off-Road Recovery .......................................... 4-13Oil

Engine ....................................................... 5-15Pressure Light ............................................. 3-35

Oil, Engine Oil Life System .............................. 5-20Older Children, Restraints ................................ 1-29Online Owner Center ........................................ 7-4OnStar® System, see OnStar® Manual ............... 2-35Other Warning Devices ...................................... 3-6Outlet Adjustment ............................................ 3-20Outside

Convex Mirror ............................................. 2-34Manual Mirror ............................................. 2-33Power Mirrors ............................................. 2-34Remote Control Mirror .................................. 2-33

Owner Checks and Services .............................. 6-8Owners, Canadian ............................................... ii

PPark (P)

Shifting Into ................................................ 2-28Shifting Out of ............................................ 2-30

ParkingBrake ........................................................ 2-27Over Things That Burn ................................. 2-31

Parking Your Vehicle ....................................... 2-30Passenger Airbag Status Indicator ..................... 3-26Passenger Compartment Air Filter ..................... 3-20Passenger Sensing System .............................. 1-60Passing ......................................................... 4-14PASS-Key® III+ .............................................. 2-15PASS-Key® III+ Operation ................................ 2-16Power

Accessory Outlet(s) ...................................... 3-16Door Locks .................................................. 2-8Electrical System ......................................... 5-93Retained Accessory (RAP) ............................ 2-20Windows .................................................... 2-13

Pretensioners, Safety Belt ................................ 1-28Programmable Automatic Door Unlock ................. 2-9

9

QQuestions and Answers About Safety Belts ......... 1-14

RRacing or Other Competitive Driving .................. 4-17Radios .......................................................... 3-48

Care of Your CD Player ............................... 3-81Care of Your CDs ........................................ 3-81Radio with CD ............................ 3-50, 3-55, 3-64Setting the Time for Radios with

Radio Data Systems (RDS) ....................... 3-49Setting the Time for Radios without

Radio Data Systems (RDS) ....................... 3-49Theft-Deterrent ............................................ 3-79Understanding Reception .............................. 3-80

Rear Door Security Locks .................................. 2-9Rear Safety Belt Comfort Guides ...................... 1-25Rear Seat Passengers, Safety Belts .................. 1-22Rearview Mirror, Automatic Dimming with

OnStar® ..................................................... 2-33Rearview Mirrors ............................................. 2-33

Reclining Seatbacks .......................................... 1-4Recommended Fluids and Lubricants ................. 6-12Recreational Vehicle Towing ............................. 4-36Remote Keyless Entry System ............................ 2-3Remote Keyless Entry System, Operation ............ 2-4Removing the Flat Tire and Installing the

Spare Tire .................................................. 5-76Removing the Spare Tire and Tools ................... 5-72Replacement Bulbs ......................................... 5-53Reporting Safety Defects

Canadian Government .................................. 7-16General Motors ........................................... 7-16United States Government ............................ 7-16

Restraint System CheckChecking the Restraint Systems .................... 1-66Replacing Restraint System Parts

After a Crash .......................................... 1-66Retained Accessory Power (RAP) ...................... 2-20Right Front Passenger Position, Safety Belts ...... 1-22Roadside

Assistance Program ....................................... 7-7Rocking Your Vehicle to Get it Out .................... 4-31Running the Engine While Parked ..................... 2-32

10

SSafety Belt

Passenger Reminder Light ............................ 3-25Pretensioners .............................................. 1-28Reminder Light ............................................ 3-24

Safety BeltsCare of ...................................................... 5-86Driver Position ............................................ 1-15How to Wear Safety Belts Properly ................ 1-15Questions and Answers About Safety Belts ........ 1-14Rear Safety Belt Comfort Guides ................... 1-25Rear Seat Passengers ................................. 1-22Right Front Passenger Position ...................... 1-22Safety Belt Extender .................................... 1-28Safety Belt Use During Pregnancy ................. 1-22Safety Belts Are for Everyone ......................... 1-9Shoulder Belt Height Adjuster ........................ 1-21

Safety Warnings and Symbols .............................. iiiScheduled Maintenance ..................................... 6-4Seats

Driver Seat Height Adjuster ............................. 1-3Easy Entry Seat ............................................ 1-7Head Restraints ............................................ 1-6Heated Seats ............................................... 1-4

Seats (cont.)Manual ........................................................ 1-2Manual Lumbar ............................................. 1-3Reclining Seatbacks ...................................... 1-4Split Folding Rear Seat .................................. 1-8

Securing a Child RestraintRear Seat Position ...................................... 1-46Right Front Seat Position .............................. 1-48

Security Light ................................................. 3-36Service ........................................................... 5-3

Accessories and Modifications ......................... 5-3Adding Equipment to the Outside of

Your Vehicle .............................................. 5-5California Proposition 65 Warning .................... 5-3Doing Your Own Work ................................... 5-4Engine Soon Light ....................................... 3-32Publications Ordering Information ................... 7-17

Servicing Your Airbag-Equipped Vehicle .............. 1-64Setting the Time

Radios with Radio Data Systems (RDS) ............ 3-49Radios without Radio Data Systems (RDS) ........ 3-49

Sheet Metal Damage ....................................... 5-89Shifting Into Park (P) ....................................... 2-28Shifting Out of Park (P) ................................... 2-30Shoulder Belt Height Adjuster ........................... 1-21

11

Signals, Turn and Lane-Change .......................... 3-8Spare Tire

Compact .................................................... 5-83Installing .................................................... 5-76Removing ................................................... 5-72Storing ....................................................... 5-80

Specifications, Capacities ............................... 5-102Speedometer .................................................. 3-24Split Folding Rear Seat ..................................... 1-8Starting Your Engine ....................................... 2-20Steering ........................................................ 4-11Steering Wheel Controls, Audio ......................... 3-79Steering Wheel, Tilt Wheel ................................. 3-6Storage Areas

Center Console Storage Area ........................ 2-37Convenience Net ......................................... 2-37Cupholder(s) ............................................... 2-37Driver’s Storage Compartment ....................... 2-37Glove Box .................................................. 2-37

Stuck in Sand, Mud, Ice or Snow ...................... 4-30Sun Visors ..................................................... 2-13Sunroof ......................................................... 2-38

TTachometer .................................................... 3-24Taillamps

Turn Signal Lamps ...................................... 5-50Turn Signal, Stoplamps and Back-up Lamps ...... 5-51

Theft-Deterrent, Radio ..................................... 3-79Theft-Deterrent Systems ................................... 2-14

Content Theft-Deterrent ................................ 2-14PASS-Key® III+ ........................................... 2-15PASS-Key® III+ Operation ............................. 2-16

Tilt Wheel ........................................................ 3-6Tires ............................................................. 5-54

Aluminum or Chrome-Plated Wheels,Cleaning ................................................. 5-88

Buying New Tires ........................................ 5-64Chains ....................................................... 5-70Changing a Flat Tire .................................... 5-71Cleaning .................................................... 5-89Compact Spare Tire ..................................... 5-83Different Size .............................................. 5-66If a Tire Goes Flat ....................................... 5-70

12

Tires (cont.)Inflation -- Tire Pressure ............................... 5-61Inspection and Rotation ................................ 5-63Installing the Spare Tire ................................ 5-76Removing the Flat Tire ................................. 5-76Removing the Spare Tire and Tools ............... 5-72Storing a Flat or Spare Tire and Tools ............ 5-80Tire Sidewall Labeling .................................. 5-56Tire Terminology and Definitions .................... 5-58Uniform Tire Quality Grading ......................... 5-67Wheel Alignment and Tire Balance ................. 5-68Wheel Replacement ..................................... 5-68When It Is Time for New Tires ...................... 5-64

TowingRecreational Vehicle ..................................... 4-36Towing a Trailer .................................. 4-39, 4-46Your Vehicle ............................................... 4-36

TractionEnhanced Traction System (ETS) .................... 4-9Enhanced Traction System (ETS) Warning

Light ...................................................... 3-31Limited-Slip Differential ................................. 4-11

TransaxleFluid, Automatic ........................................... 5-23Fluid, Manual .............................................. 5-23

Transaxle Operation, Automatic ......................... 2-23Transaxle Operation, Manual ............................ 2-25Transmission

Up-Shift Light .............................................. 3-29Trunk ............................................................ 2-10Turn and Lane-Change Signals .......................... 3-8Turn Signal/Multifunction Lever ........................... 3-7

UUnderstanding Radio Reception ........................ 3-80Uniform Tire Quality Grading ............................ 5-67Up-Shift Light ................................................. 3-29

VVehicle

Control ........................................................ 4-6Damage Warnings ........................................... ivLoading ...................................................... 4-31Parking Your ............................................... 2-30Symbols ......................................................... iv

Vehicle Data Collection and Event DataRecorders .................................................. 7-11

13

Vehicle IdentificationNumber (VIN) ............................................. 5-91Service Parts Identification Label ................... 5-92

Vehicle PersonalizationDIC ........................................................... 3-42

Ventilation Adjustment ...................................... 3-20Visors ........................................................... 2-13

WWarning Lights, Gages and Indicators ................ 3-22Warnings

DIC Warnings and Messages ........................ 3-40Hazard Warning Flashers ............................... 3-6Other Warning Devices .................................. 3-6Safety and Symbols ......................................... iiiVehicle Damage .............................................. iv

WheelsAlignment and Tire Balance .......................... 5-68Different Size .............................................. 5-66Replacement ............................................... 5-68

Where to Put the Restraint ............................... 1-40

Windows ....................................................... 2-12Manual ...................................................... 2-13Power ........................................................ 2-13

WindshieldWiper Blades, Cleaning ................................ 5-88

Windshield Washer ......................................... 3-10Fluid .......................................................... 5-35

Windshield WiperBlade Replacement ...................................... 5-53Fuses ........................................................ 5-93Windshield Wipers ......................................... 3-9

Winter Driving ................................................ 4-26Wiper Activated Headlamps .............................. 3-14

XXM™ Satellite Radio Antenna System ................ 3-81

YYour Vehicle and the Environment ....................... 6-2

14

Documents

2006 Chevrolet Cobalt Owner Manual M · 2005-08-22 · Front Seats Manual Seats {CAUTION:You can lose control of the vehicle if you try to adjust a manual driver’s seat while the